HT-R593
AV RECEIVER
Basic Manual
Advanced Manual found here
E
n
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1:
TV
Personal computer
I
HDMI cable
To use the ARC function, connect to the ARC
compatible HDMI jack of the TV and make an
appropriate setting on the unit. See the section
4 "HDMI Setup" of "Step 2: Setting Up".
I
I
Blu-ray Disc/
DVD player
Game console
Set-top box/Digital
video recorder, etc.
Satellite/Cable
set-top box, etc.
zꢀ
Connection with a TV not supporting ARC
To connect the TV and the unit, connect the HDMI OUT
jack of the unit and the HDMI input jack of the TV with an
HDMI cable. With this connection, it becomes possible to
display the setting screen of the unit on the TV or transmit
video/audio signals from the player to the TV. If your TV
supports ARC (Audio Return Channel), it is possible to
play the TV sound with the AV receiver's speakers with
this connection only. If your TV does not support ARC,
you need, in addition to the HDMI OUT jack connection, a
digital optical cable connection between the digital audio
out optical jack of the TV and the DIGITAL IN OPTICAL
jack of the unit or an analog audio cable connection
between the audio output jack of the TV and the TV/CD
analog audio input jack of the unit.
Connecting the TV and players
1
TV
Important: The power cord must be connected only after all
other connections are completed.
AUDIO
OUT
DIGITAL
OPTICAL
OUT
HDMI cable connection
The unit has many HDMI jacks on its rear panel and each
of them corresponds to an input selector button of the same
name on the front panel. For example, a Blu-ray Disc player
will be connected to the IN 1 jack and the BD/DVD button
on the front panel will be used to listen to the playback
sound (if the player is CEC compliant, input will be switched
automatically). If you add another Blu-ray Disc player, you
can use any other jack than IN 1. It is possible to change
assignment of the input jacks and input selector buttons.
For how to make settings, see the Advanced Manual.
Select an appropriate connection
¼ꢀ
for your TV.
The unit supports the HDMI Through function that allows
transmission from players to the TV even if the unit is in
standby.You have to modify the settings to enable the input
selection link with CEC compliant device, connection with
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Step 1: Connections
„
ARC compatible TV, and HDMI Through function. See the
section 4 "HDMI Setup" of "Step 2: Setting Up".
rꢀ To play 4K or 1080p video, use the high speed HDMI
cable.
Audio signal connection
1 Digital connection: Use a digital optical cable
(OPTICAL) or digital coaxial cable (COAXIAL) for
connection with a player.
Digital optical cable (OPTICAL)
Connecting Components without HDMI
As the digital in optical jack of the unit has a
¼ꢀ
cover, push in the cable against the cover as it is
turned inside.
If your AV component does not have HDMI jack, use an
available jack of your component for cable connection with
this unit. Just as the HDMI jacks, other jacks on this unit have
a preassigned input selector button on the front panel. See
the name of the input selector button shown with the jack
when connecting the device.
Digital coaxial cable (COAXIAL)
2 Analog connection: Use an analog audio (RCA) cable
for connection with a player.
To enjoy multi-zone playback of audio of a CD player
or such other player without HDMI output jack, you
need to use the analog audio (RCA) cable to connect
the corresponding jacks of the player and this unit. For
details on the multi-zone function, see the section 6
"Using the multi-zone function" of "Step 3: Playing Back".
1
2
3
4
Analog audio (RCA) cable
„
Video signal connection
3 Use a component video cable to connect a TV
with component video input jacks and a player with
component video output jacks.
rꢀ When a component video cable is used for
connecting the unit and the player, the unit and TV
must also be connected with a component video
cable.
Component video cable
Its transmitted video has higher quality than that
¼ꢀ
of composite video cable.
If the connected turntable does not have built-in
Use a composite video cable to connect a TV with
composite video input jack or a player with composite
video output jack.
4
audio equalizer, you need to install an external audio
equalizer between the unit and the turntable. Contact the
manufacturer for more information.
Composite video cable
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Step 1: Connections
Front R
Front L
Connecting speakers
2
Center
Important: The power cord must be connected only after all
other connections are completed.
12
3
6
45
Front speakers
Center speaker
1 2
3
Surround speakers
Subwoofer
4 5
6
rꢀ The position and size of the speakers is an image.
rꢀ Up to two subwoofers can be connected.
rꢀ To use the multi-zone function, refer to the section 6
"Using the multi-zone function" of "Step 3: Playing Back".
It is ideal to install the front speakers and center speaker
at the height not too far from that of the screen. As for the
surround speakers, it is recommended to install at the
position slightly backward of the listening position and
higher than the listener's ears, since it is preferable to
obtain a diffused sound rather than a direct sound. As a
bass sound reproduced by subwoofer is less directional,
it is possible to place it at any position. Consider the best
installation position where a bass sound can be clearly
heard by listening to actual playback.
Surround R
Surround L
Subwoofer with built-in
power amplifier
Cut and remove the plastic coating from the end of the
speaker cable, twist the core and connect it to the terminal.
Make correct connection between the unit's jacks and
speaker's jacks (+ to + and - to -) for each channel. If
connection is wrong, a bass sound may become poor due
to reverse phase.
1/2"-5/8"(12-15 mm)
Importantꢄꢀ%QPPGEVꢀURGCMGTUꢀYKVJꢀꢂꢀŝꢀVQꢀꢁꢂꢀŝꢀKORGFCPEGꢃꢀ
Using a speaker with less impedance than the supported
value may result in failure.
¼
ꢀ
The positive (+) speaker terminals of Home Theater System are color
coded for identification purpose. Connect the colored cable to the
positive (+) speaker terminal in the same color as the cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Step 1: Connections
Connect LINE INPUT jack on the subwoofer and PRE OUT
SUBWOOFER jack on this unit as described in the figure.
Network connection
Other connections
3
¼
ꢀ
Up to two subwoofers can be connected. If the subwoofer has a cut-off
You can enjoy Internet radio and DLNA by connecting the
unit to LAN. The unit can be connected to the router with
an Ethernet cable or to the wireless LAN router with Wi-
Fi connection. In case of wired connection, connect the
Ethernet cable to the Ethernet port. For Wi-Fi setup, see
the section 3 of "Step 2: Setting Up".
filter selection switch, set to DIRECT. If the subwoofer does not have a
cut-off filter selection switch but has a cut-off frequency adjusting dial,
turn it to the maximum frequency. If your subwoofer does not have built-in
power amplifier, you can connect a power amplifier between the unit and
the subwoofer.
AM/FM antenna connections
Connect the antennas to listen to AM/FM broadcast. When
listening to the broadcast for the first time, adjust the
antenna position and orientation to get the best reception.
rꢀ The speaker setting is 5.1 ch at the time of purchase.You
can change it manually or by using automatic speaker
setting.
Internet radio
rꢀ Short-circuiting the + cable and - cable or contacting the
cable core to the rear panel of the unit may cause failure.
Also do not connect two or more cables to one speaker
jack or one speaker to several jacks.
AM loop antenna (supplied)
PC
Router
Indoor FM antenna
(supplied)
NAS
Fix with a tack on
the wall.
(North American model)
(Asian model)
Headphones connection
When using commercially available banana plugs:
tighten the speaker terminals to the end and then insert
the banana plugs. Do not insert the cable core directly into
the center hole of the speaker terminal. (North American
model)
Connect stereo headphones with a standard plug (1/4 inch
or ø 6.3 mm) to the PHONES jack. Sound from the speakers
will be off while you are using the headphones.
rꢀ If you selected any other listening mode than Pure Audio
(Asian model), Stereo, Mono and Direct, connecting
headphones will switch the listening mode to Stereo.
Assemble the AM loop antenna (supplied).
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Setting Up
Step 2:
Place the speaker setup microphone at the
measurement position .
rꢀ Correct measurement will not be possible if the
microphone is held by hand. It is desirable that the
microphone be placed on a stand at the height
of listener's ears. Measurement is not possible if
headphones are being used.
1.
Turning the power on
1
Connect the power cord to the outlet. Press ON/
z
STANDBY on the main unit or RECEIVER on the remote
z
controller to turn the unit on or to standby mode.
TV
z Operation:You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN. To return to
the Home menu, press HOME.
: Listening area
: Measurement position
with microphone
rꢀ When the unit is turned on, a large instantaneous current
may flow affecting functionality of the computer and other
devices. It is recommended to use a separate outlet from
that for the computer or such other sensitive devices.
Connect the speaker setup microphone to the
SETUP MIC jack on the unit.
2.
SETUP MIC jack
Firmware update notification: If the unit is connected via
LAN and there is firmware update available, the "Update
New F/W" message will appear. Press the
/
buttons on
S T
the remote controller to select whether to update or not
and press ENTER to confirm your selection. For details on
firmware update, see the Advanced Manual.
Making automatic speaker setting
2
Speaker setup
microphone
The AccuEQ Room Calibration function, our proprietary
technology, collects the test tones coming from each
speaker with the supplied speaker setup microphone and
performs automatic setting of the number of speakers,
volume level, each speaker's optimum crossover
frequencies, and distance from the primary listening
position. Distortion caused by difference of room acoustic
environment will also be corrected to produce clear, well-
balanced sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Step 2: Setting Up
Follow the guidance displayed on the TV screen.
You can set up by viewing the guidance displayed on the
TV screen. To display the guidance, you need to make
HDMI connection between the unit and TV. Select the
item with the cursor buttons of the remote controller and
press ENTER to confirm your selection.
3.
rꢀ The subwoofer sound may not be detected since
it is extremely low frequencies. If "No" is shown for
"Subwoofer" in the measurement result screen,
raise the subwoofer volume to around the half of
its maximum volume and make its frequency to the
maximum level.
rꢀ "12. Network Setup" becomes selectable after the
network starts up even if it cannot be selected first. It
may take about a minute to start up.
Select "Wi-Fi" with the cursor buttons and select "On" to
display "Wi-Fi Setup".
Select "Start" in "Wi-Fi Setup" with the cursor buttons
and press ENTER.
4
5
On the screen showing "AccuEQ" is "On", press
ENTER.
The settings will be applied to all the inputs.
6.
7.
Select the SSID of the access point to be connected
with the cursor buttons and press ENTER.
When the SSID of the access point appears on the TV
screen, select the desired access point.
rꢀ If you changed the initial setting of the access point to
skip password entry, step 4 starts automatically.
rꢀ If you changed the initial setting of the access point
to hide the SSID, see "When the access point is not
displayed".
2.
AccuEQ Room Calibration
Subwoofer
<
Yes
>
When "Please unplug setup microphone." is
displayed, disconnect the microphone.
rꢀ If you change the speaker positions, the room furniture
layout or the number of speakers, perform automatic
speaker setting again.
rꢀ If there is an error message, follow the on-screen
instruction to remove the error cause.
[ENTER] : Next
Select and set the authentication method.
3.
The test tones sound from the connected speaker
and automatic speaker setting starts.
The microphone measures the test tones. Measurement
will be made twice for each speaker. It takes several
minutes to be completed.
rꢀ Each speaker generates test tones at high volume
level during measurement. Keep the room as quite
as possible during measurement. Measurement
may be interrupted if there is ambient noise or radio
frequency interference. Close the window and turn off
the home appliance and fluorescent light.
4.
Making Wi-Fi setting
3
Wi-Fi Setup
Please select the authentic
method.
Items to be checked before starting the procedure
Wi-Fi connection requires an access point such as
wireless LAN router (¼). Write down the SSID and
password (key) of the access point if they are shown
in the label of the main body. If the access point has
an automatic setting button (may be called differently
according to the manufacturer), you can set up
without inputting the password. For how to use the
automatic setting button of the access point, refer to
its instruction manual.
Enter Password
Push Button
PIN code
rꢀ To cancel measurement on the way, disconnect the
microphone plug.
When the screen above is displayed, select and set one
of the three authentication methods: "Enter Password",
"Push Button" and "PIN code". See below for details of
and how to set each method.
When the measurement is completed, the
measurement result is displayed.
5.
¼ꢀ
The unit supports Wi-Fi connection with 2.4 GHz
access point.
Enter Password: Enter the password of the access point to
z Operation:You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
establish connection.
AccuEQ Room Calibration
Select "Enter Password" with the cursor buttons and
press ENTER.
1
<-Review Speaker Configuration->
Subwoofer
Front
Center
Surround
Crossover
:
:
:
:
:
Yes
Small
Small
Small
150 Hz
2 Enter the password (¼) on the keyboard screen, select
"OK" with the cursor buttons and press ENTER.
rꢀ In some case, the key board screen is displayed
automatically instead of authentication screen
depending on access point device.
Start "Wi-Fi Setup".
Press RCV on the remote controller and then press
1.
1
Save
Cancel
¼ꢀ
To switch uppercase/lowercase, select "Shift" and press ENTER.
HOME.
Select "Left" or "Right" and press ENTER to move the cursor to
the selected direction. Select "BS" and press ENTER to delete
the character at the left of the cursor position. To select whether to
mask the password with "*" or display it in plain text, press D on the
remote control. Press + 10 on the remote controller to enable the
"Shift" function and CLR to delete all the input characters.
Select "Setup" with the cursor buttons and press
ENTER.
Select "12. Network Setup" with the cursor buttons and
press ENTER.
2
3
d c
on the remote controller to check the settings.
Press
/
Pressing ENTER when "Save" is selected will save the settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Step 2: Setting Up
If the security method of the access point to be
connected is WEP, select "Default Key ID", select "OK"
and press ENTER.
3
HDMI Through
HDMI Setup
4
The function allows transmission from players to the TV
even if the unit is in standby. Setting the HDMI CEC (RIHD)
setting mentioned above to "On" can enable this setting
automatically. It is also necessary to make the HDMI linked
system setting on the TV. See the TV's instruction manual
for details.
rꢀ Although enabling the HDMI Through function increases
power consumption during standby, the unit automatically
enters the HYBRID STANDBY mode that can minimize
the increase of power consumption by keeping only the
minimum circuits active.
The unit supports the linked system function such as power
on/off link when connected via HDMI cable with a CEC
(Consumer Electronics Control) compliant TV or player.You
need to change the initial setting to use the linked system
function, HDMI Through function and ARC (Audio Return
Channel) function.
Push Button: Use the automatic setting button of the
access point to establish connection.
Select "Push Button" with the cursor buttons and press
ENTER.
Hold down the automatic setting button of the access
point for the necessary seconds, select "OK" with the
cursor buttons and press ENTER.
1
2
z Operation:You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
PIN code: Select this method when the automatic setting
button of the access point is beyond the reach. Select "PIN
code" with the cursor buttons and press ENTER to display
the 8-digit PIN code. Register the displayed PIN code to the
access point, select "OK" with the cursor buttons and press
ENTER. For how to register the PIN code to the access
point, refer to its instruction manual.
ARC (Audio Return Channel)
Simple connection to the ARC compatible TV using a
single HDMI cable allows to listen to the TV sound from the
speakers connected to the unit. To use the ARC function,
connect the unit to the ARC compatible HDMI jack of the
TV. Then, set the HDMI CEC (RIHD) mentioned above to
"On" on the unit, and make the following setting.
HDMI CEC (RIHD)
Establish connection.
4.
The connection process starts and the Wi-Fi indicator
on the left of the unit's display starts flashing. When
connection has been established, the Wi-Fi indicator
changes from flashing to staying lit. If the Wi-Fi indicator
does not stay lit, connection has not been established.
Make the setting again. If "Push Button" does not work,
try "Enter Password".
Press RCV on the remote controller and then press
HOME.
Select "Setup" with the cursor buttons and press
ENTER.
Select "11. HDMI Setup" with the cursor buttons and
press ENTER.
Select "Audio Return Ch" with the cursor buttons
and select "Auto".
1.
2.
3.
4.
When the access point is not displayed
c
Select "Other..." with
on the remote controller and
„ꢀTurning the TV to standby mode will turn the unit to
standby mode.
„ꢀOn the TV side, it is possible to set whether to output
audio from the speakers connected to the unit or from
the TV's speakers.
„ꢀStarting playback of a CEC compliant player/recorder will
automatically switch the unit's input to the HDMI input of
the player/recorder. If the unit is in standby mode, it will
automatically be turned on.
press ENTER to display the keyboard screen. Input
the SSID and password. Make the following settings
according to the router setting.
„ WPA/WPA2 method
Select "WPA" or "WPA2" in "Security method", select
"OK" and press ENTER.
Audio output of connected players
To enjoy digital surround sound including Dolby Digital
and DTS, audio output should be set to "Bitstream
output" on the connected blu-ray disc player or other
devices. If the TV does not support bitstream signals,
set the audio output to "PCM output" on the player to
listen to the audio from the TV's speakers. For how
to set the player, see the instruction manual of the
player. Some settings of the blu-ray disc player may
prevent reproduction of DTS-HD Master Audio. In
that case, turn "BD video supplementary sound" (or
secondary sound) to "Off" and try again.
„ WEP method
Select "WEP" in "Security method", and select
"Default Key ID". Then select "OK" and press ENTER.
rꢀ If encryption setting has not been made on the
wireless LAN router, select "None" in "Security
method", select "OK" and press ENTER.
Press RCV on the remote controller and then press
HOME.
Select "Setup" with the cursor buttons and press
ENTER.
Select "11. HDMI Setup" with the cursor buttons and
press ENTER.
Select "HDMI CEC (RIHD)" with the cursor buttons
and select "On".
1.
2.
3.
4.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Playing Back
Step 3:
1
RECEIVER button: Turns the unit on or into standby
z
Playing the player and TV
mode.
1
1
2
2 RCV button: Switches the remote controller to the
mode for operating this unit.
3 REMOTE MODE/INPUT SELECTOR buttons: Switches
the input to be played.
8
9
3
4 Cursor buttons and ENTER button: Moves the cursor
and confirms the selection.
5 Q SETUP button: Displays the Quick Setup menu that
allows you to set the frequently used functions including
input selection and volume adjustment.
z To control the unit: The remote controller may be in the
remote mode that enables control of other devices. In the
state of remote mode, you will not be able to operate this
unit. When you operate the unit, operate it from back to (a
mode in which to operate this unit) RECEIVER mode by
F
6
Listening mode buttons: Allows you to select the
listening mode.
7
8
DIMMER button: Switches the brightness of the display.
ZONE2 button: For use when the unit is connected with
a pre-main amplifier in a separate room and sound is
played there.
pressing
RCV always.
2
4
5
Turning the power on.
Press
the power on.
rꢀ You need to change the input setting of the TV to the
one for connection with this unit. Use the TV's remote
controller.
1.
G
H
RECEIVER on the remote controller to turn
1 z
9 MUTING button: Temporarily mutes audio.
VOLUME buttons: Allows you to adjust the volume. This
button also cancels the muting.
RETURN button: Returns the display to the previous state.
HOME button: Displays the Home menu that allows you to
make advanced settings and use Internet radio and DLNA.
DISPLAY button: Switches the information on the display.
F
G
H
Select the input of the unit and start playback on the
player or TV.
rꢀ Press
player has been assigned. Press TV/CD to play the
TV's sound.You can also use the input selector
buttons on the main unit.
rꢀ Input will automatically be selected if the TV or player
is CEC compliant and connected to the unit with
HDMI cable.
2.
6
7
I
INPUT SELECTOR to which the desired
3
rꢀ The buttons other than
-
1 I
are for operating other
devices.
I
Select the desired listening mode.
3.
4.
Press the
listening mode buttons to switch the
6
mode so that you can enjoy different listening modes.
For details about the listening modes, see "Listening
modes".
Adjust the volume with
.
F
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Step 3: Playing Back
"Bass": Allows you to enhance or moderate the bass.
"Treble": Allows you to enhance or moderate the treble.
"PM Bass": Allows you to keep the clear midrange and
effectively enhance the bass.
Listening modes
Listening to AM/FM Radio
2
Select the desired mode by switching and listening actual
sound in different modes. The selectable listening modes
depend on the format of the input signals.
Auto tuning method is explained in Basic Manual. For more
details on AM/FM radio station, see Advanced Manual.
„ Muting Temporarily: Press MUTING on the remote
controller. To cancel the muting, press MUTING again, or
press VOL / .
Press AM or FM on the unit to select either "AM" or
"FM".
Press TUNING MODE on the unit so that the "AUTO"
indicator on the unit's display lights.
1.
2.
3.
MOVIE/TV:You can select a listening mode suitable for
movies and TV programs.
„ Changing the Display Brightness: Press DIMMER on
the remote controller several times to select the desired
brightness.
MUSIC:You can select a listening mode suitable for music.
GAME:You can select a listening mode suitable for games.
Press TUNING on the unit.
The automatic search for a radio station starts.
Searching stops when one is found. When tuned into a
radio station, the " TUNED " indicator on the unit's
display lights. The "FM STEREO" indicator lights if the
radio station is an FM radio station.
„ Checking the Input Format: Press DISPLAY on the
remote controller several times to switch the display of the
main unit in order of:
STEREO:You can select a listening mode for stereo and all
channel stereo sources.
PURE AUDIO (main unit only) (Asian model): The display
and analog video circuit is cut off to provide purer sound.
rꢀ For details on the listening modes, see the Advanced
Manual.
Input source &
volume
TUNED
AUTO
"Direct" for playing the input signals as-is
Selecting this mode allows the input signals to be
played as they are. For example, 2 ch signals of music
CD will be played in stereo, 5.1 ch signals in 5.1 ch,
and Dolby Digital signals of blu-ray disc or DVD in the
Dolby Digital sound field according to the specified
number of channels.
Listening
mode
FM STEREO
(Actual display depends on the country.)
Signal
format
Registering a Radio Station: It allows you to register up to
40 of your favorite AM/FM radio stations.
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the unit so that the preset number
on the display flashes.
3. Repeatedly press PRESET on the unit to select a
number between 1 and 40 while the preset number is
flashing (about 8 seconds).
Sampling
frequency
Other useful functions
rꢀ If "Dolby D 5.1" is displayed in signal format, the
Dolby Digital 5.1 ch signals are being input. When
listening to AM/FM radio, the band, frequency and
preset number are displayed.
„ Playing Video and Audio from Different Sources: It
is possible to play audio and video from different sources.
For example, you can play audio from the CD player and
video from the BD/DVD player. In this case, press BD/DVD
and then TV/CD. Then start playback on the BD/DVD player
and CD player. This function is effective when an input with
audio only has been selected (TV/CD, AM or FM in the
initial setting).
4. Press MEMORY on the unit again.
When registered, the preset number stops flashing.
Repeat this procedure for all of your favorite AM/FM
radio stations. Press PRESET or CH +/- to select
the registered radio station.
„ Adjusting Sound Quality: It is possible to enhance
or moderate the bass and treble of front speakers. Press
TONE on the main unit several times to select the desired
setting from "Bass", "Treble", and "PM Bass" (Phase
Matching Bass), and adjust with +/-.
rꢀ It cannot be set if the listening mode is Pure Audio (Asian
model) or Direct.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Step 3: Playing Back
rꢀ It may take about a minute until connection is established
when the unit is on since the Bluetooth function takes
some time to start up.
rꢀ If the volume setting on the Bluetooth-enabled device is
low, the sound will not be output from this unit.
rꢀ Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the Bluetooth-enabled
device.
NAS device connected to the network. Select the server
with the cursors, select the desired music file and press
ENTER to start playback.
Connecting and playing the Bluetooth-
enabled device
3
Home Media:You can play music files in a shared folder
on the PC or NAS device connected to the network.
Select the server with the cursors, select the desired
music file and press ENTER to start playback.
You can wirelessly enjoy music files stored in a smartphone
or other Bluetooth-enabled device. The coverage area is
48 feet (15 meters).
rꢀ "Network Service" becomes selectable after the network
starts up even if it cannot be selected first. It may take
about a minute to start up.
„
USB: Select "USB" in the TV screen and connect a
Using the Home menu
4
USB storage device to the USB port on the front panel. On
the TV screen, select the desired folder or music file with
the cursors of the remote controller and press ENTER to
confirm and start playback.
rꢀ "USB" becomes selectable after the USB function starts
up even if it cannot be selected first. It may take about a
minute to start up.
In the Home menu, you can make advanced settings and
use Internet radio and DLNA. For more information about
the operation, see the Advanced Manual.
rꢀ The Bluetooth-enabled device needs to support the
A2DP profile.
rꢀ Note that connection is not always guaranteed with all
Bluetooth-enabled devices.
Press RCV on the remote controller and then press
HOME.
1.
The Home menu displays on the TV screen.You can
also use the HOME button on the main unit.
„ Sleep Timer: Select to turn the unit into standby mode
automatically when the specified time elapses.
Pairing
Pairing is necessary when using the Bluetooth-enabled
device for the first time. Before starting the procedure, learn
how to enable the Bluetooth setting function and to connect
with other devices on the Bluetooth-enabled device.
„ InstaPrevue: Select to preview videos input from the HDMI
input jacks collectively in a single screen. The screen has a
main window (current input video) and sub windows (other
input videos). To switch the current input, select the desired
sub window with the cursor buttons and press ENTER.
rꢀ A black sub window is shown for the input with no video
signals.
Home
Setup
Network Service
USB
Sleep Timer
InstaPrevue
Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH
indicator starts flashing.
1.
rꢀ "InstaPrevue" cannot be selected if the video is being
input from HDMI IN 6 or there is no signal from the input
currently selected.
rꢀ Depending on video signals, the picture may not be
properly rendered on the preview thumbnails.
Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
To return to the previous screen, press RETURN. To
return to the Home menu, press HOME.
2.
While the BLUETOOTH indicator is flashing,
complete connection on the Bluetooth-enabled
device in the nearby area within about 2 minutes.
If the name of this unit is displayed on the Bluetooth-
enabled device's display, select this unit. Paring will end
after a short time.
rꢀ If a password is requested, enter "0000".
rꢀ When connecting the unit to any other Bluetooth-
enabled device, start pairing by pressing and holding
BLUETOOTH until the BLUETOOTH indicator starts
flashing. This unit can store the data of up to ten paired
devices.
2.
„ Setup:You can change the assignment of input terminals
and input selector buttons and also make various speaker
settings and other advanced settings.
„ Network Service: Select to use Internet radio services
and the DLNA function. When you connect the unit to the
network and press ENTER, the network service screen
will be displayed on the TV. On the TV screen, select the
desired service or music file with the cursors of the remote
controller and press ENTER to confirm and start playback.
Playing sound of the Bluetooth-enabled device
Internet radio service:You can listen to TuneIn or such
If the unit is on and the Bluetooth-enabled device is
connected, the input will be automatically switched to
BLUETOOTH. Play music in this state.
other Internet radio stations registered in advance.
DLNA :You can play music files stored in the PC or
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Step 3: Playing Back
AccuEQ: Disables the sound field correction settings
set in the automatic speaker setting. The setting can be
separately set to each input.
rꢀ The setting cannot be selected if the automatic
speaker setting has not been performed.
rꢀ It cannot be set if headphones are connected or the
listening mode is Pure Audio (Asian model) or Direct.
Using Quick Setup menu
5
In the Quick Setup menu, you can set frequently used
functions including input selection and volume adjustment.
Press Q SETUP on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
1.
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night.You can enjoy the effect
on Dolby Digital, Dolby Digital Plus and Dolby TrueHD
sources only.
rꢀ Turning the unit to standby mode will set the setting
to "Off". In case of Dolby TrueHD, the setting will be
set to "Auto".
Quick Setup
Input
Audio
Information
Listening Mode
Music Optimizer : Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input.
rꢀ The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream
signals.
Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
2.
To return to the previous screen, press RETURN.
„ Input: Select the input and check the assignment of input
selector buttons.
rꢀ It cannot be set if the listening mode is Pure Audio
(Asian model) or Direct.
„ Audio:You can change various audio settings including
the ones for adjusting audio quality and speaker level.
rꢀ You cannot select this item when audio is played from the
TV's speakers.
Cinema Filter: Adjust the soundtrack that was
processed to enhance its high pitch range, in order to
make it suitable for home theater.
rꢀ This function can be used in the following listening
modes: Multichannel, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, DTS-HD High Resolution Audio,
DTS-HD Master Audio, DTS Express, DTS 96/24,
Dolby PL II Movie, DTS NEO:6 and Neo:6 Cinema.
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap.
rꢀ It cannot be set if the input is "NET", "USB" or
"BLUETOOTH".
rꢀ It cannot be set if the listening mode is Pure Audio
(Asian model) or Direct.
„ Information: Display the audio information.
Bass,Treble: Adjust volume of the front speaker.
rꢀ It cannot be set if the listening mode is Pure Audio
(Asian model) or Direct.
„ Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC" and "GAME".
rꢀ It cannot be set when audio is played from the TV's speakers.
PM Bass (Phase Matching Bass): Suppress phase
shift in the midrange to enhance bass sound. Thus
smooth and powerful bass sound can be obtained.
rꢀ It cannot be set if the listening mode is Pure Audio
(Asian model) or Direct.
Subwoofer Level, Center Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
rꢀ The speakers cannot be adjusted if they have been
set to "No" or "None" in "Sp Config".
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Step 3: Playing Back
Making multi-zone connection
Performing multi-zone playback
Using the multi-zone function
6
Press ZONE2 on the remote controller, point the
remote controller at the unit and press RECEIVER.
Connect the ZONE 2 LINE OUT jacks of the unit and the
line-in jacks of the pre-main amplifier in a separate room
with an analog audio (RCA) cable.
1.
z
You can connect the unit with a pre-main amplifier or
speakers in a separate room and playback audio sources
from an external device connected to the analog audio
input jacks of the unit. And also, you can enjoy sources
of "NET", "USB", "BLUETOOTH" as well as AM/FM
broadcasting. It is also possible to play the sound from
different analog connected devices in the main room and
separate room.
rꢀ As for the "NET", "USB" and "BLUETOOTH", you cannot
select different inputs for the main room and separate
room. For example, if "NET" has been selected in the
main room and then "USB" is selected on the pre-main
amplifier in the separate room, the input in the main room
will change to "USB" accordingly.
"Z2" lights on the unit and the ZONE function is enabled.
(ZONE 2 is now on.)
Press ZONE2 on the remote controller again and
press INPUT SELECTOR of the input to be played in
a separate room.
2.
To play the same source in the main room and separate
room, hold down ZONE2 for approximately 3 seconds.
The volume should be adjusted with the pre-main
amplifier used in the separate room.
To control on the main unit: Press ZONE2 and within
ꢅ|UGEQPFUꢆꢀRTGUUꢀVJGꢀKPRWVꢀUGNGEVQTꢀDWVVQPꢀQHꢀVJGꢀKPRWVꢀVQꢀDGꢀ
played in a separate room. To play the same source in the
main room and separate room, press ZONE2 twice.
rꢀ When listening to AM/FM broadcasting, you cannot
select different stations for the main room and separate
room. Therefore broadcasting of the same station will be
heard in the both rooms.
To turn off the multi-zone function: Press ZONE2 on the
remote controller and press RECEIVER. Alternatively
z
press OFF on the main unit.
rꢀ Multi-zone playback cannot be performed if a player is
connected to HDMI jack using HDMI cable or OPTICAL/
COAXIAL jack using digital cable. Connect the players
using analog audio cable for multi-zone playback. Analog
audio output setting may be necessary on the player.
rꢀ If ZONE 2 is on, power consumption during standby
becomes larger than normal.
rꢀ If ZONE 2 is turned on when the listening mode of the
main room is Pure Audio, it will automatically switch to
Direct. (Asian model)
Connecting with Player
To use a Blu-ray Disc player or other players as the source
of multi-zone audio output, it is necessary to connect the
RCA audio output jacks of the player and the analog audio
input jacks of the unit using the analog audio (RCA) cable.
AUDIO
OUT
rꢀ While ZONE 2 is on, the RI linked system function
(interlink between Onkyo components) is disabled.
rꢀ Multi-zone audio output is not possible if the player and
the unit are connected only via HDMI cable or digital
cable.
rꢀ Some players require analog audio output setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
1
2
3 4
56
7
8
9
F
G
H
I
J
K
L
(Asian model)
(Asian model)
N
O
P
Q
R
S
T
M
Front Panel
MEMORY button: Registers or deletes a station.
TUNING MODE button: Switches the tuning mode.
DISPLAY button: Switches the information on the
display.
PHONES jack: Stereo headphones with a standard plug
are connected.
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
Input selector buttons: Switches the input to be
played.
AUX INPUT AUDIO/VIDEO jacks: A video camera or
such other device is connected.
USB port: A USB storage device is connected so that
music files stored in it can be played.
SETUP MIC jack: The supplied speaker setup
microphone is connected.
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
1
2
ON/STANDBY button: Turns the unit on or into
F
G
H
N
O
P
Q
R
S
T
z
standby mode.
BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
ZONE 2 button: Controls the multi-zone function.
Wi-Fi indicator: Lights when the unit is connected to
the wireless LAN router.
HOME button: Displays the Home menu.
I
J
d
c
Cursor buttons, lTUNINGj button, PRESET
3
4
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
Remote control sensor: Receives signals from the
remote controller.
broadcasting, tune in to the station with lTUNINGj or
5
d
c
.
select the registered station with PRESET
RETURN button: Returns the display to the previous
state.
OFF button: Switches the multi-zone function to off.
6
K
7 Display
MASTER VOLUME: Allows you to adjust the volume.
8 LISTENING MODE buttons: Allows you to select the
L
M
MUSIC OPTIMIZER button
(North
and indicator
listening mode.
DIMMER button (North American model): Switches
the brightness of the display.
RT/PTY/TP button (Asian model): Can be used when
receiving the station transmitting text information.
American model): Turns on/off the MUSIC OPTIMIZER
function that improves the quality of the compressed
audio.
9
PURE AUDIO button and indicator (Asian model):
Switches to the Pure Audio mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
1
2
3
4
5
6
7
1 23
4
9
5
6
7
8
Display
Lights in the following conditions. "Z2": ZONE 2 output
is on. / "HDMI": HDMI signals are input and HDMI input
selector is selected. / "ARC": Audio signals are input
from ARC compatible TV and TV/CD input selector
is selected. / "3D": Input signals are 3D. / "USB" (¼):
"USB" input is selected and USB storage device is
connected. / "NET" (¼): "NET" input is selected and
the unit is connected to the network. / "DIGITAL":
Digital signals are input and the digital input selector is
selected. / Cursor indicators: NET or USB is controlled.
1
8
9
F
G H
¼
ꢀ"USB" and "NET" will flash if the connection is not correct.
Lights when headphones are connected.
Lights when NET or USB is controlled.
Lights according to the type of input digital signals and
the listening mode.
Lights when Music Optimizer is enabled.
Lights in the following conditions. "AUTO": Tuning mode
is auto. / "fTUNEDe": Receiving AM/FM radio. fe
flashes while tuning is automatically performed. / "FM
STEREO": Receiving FM stereo. / "RDS" (Asian model):
Receiving RDS broadcasting.
2
3
4
Rear Panel
ZONE 2 LINE OUT jacks: Audio output jacks connected
to the pre-main amplifier for multi-zone playback in a
separate room.
SUBWOOFER PRE OUT jacks: A subwoofer with built-
in amplifier is connected.
1 RI REMOTE CONTROL jack: An Onkyo product with RI
jack can be connected and synchronized with this unit.
2 (/ꢀ#06'00#ꢀLCEMꢀꢁꢂꢃꢀŝꢄꢀCPFꢀ#/ꢀ#06'00#ꢀ
terminal: The supplied antennas are connected.
3 COMPONENT VIDEO IN and OUT jacks: Component
video input/output jacks
4 ETHERNET port: Used for LAN connection
5 HDMI IN/OUT jacks: Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
6 SPEAKERS terminals: Speakers are connected.
7 Power cord
8 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
signals are input.
9 COMPOSITE VIDEO/AUDIO IN jacks: Analog video
G
H
5
6
"MUTING": Flashes when muting is on.
7
8
Lights in the following conditions. "SLEEP": Sleep timer
has been set. / "ASb" (Auto Standby): Auto Standby
is on. / "ch": Channel is being set. / "Hz": Crossover
frequencies are being set. / "m/ft": Speaker distances
are being set. / "dB": Speaker volume is being set.
Displays various information of the input signals.
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
9
signals and audio signals are input.
COMPOSITE MONITOR OUT V jack: Video signals are
F
output to the connected monitor or TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Troubleshooting
HDMI control does not function correctly.
rꢀ Set the CEC link function of the unit to on. It is also
necessary to make the HDMI linked system setting on
the TV. See the TV's instruction manual for details.
Resetting the unit
„
Before starting the procedure
Problems may be solved by simply turning the power
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection, setting
and operating procedure. Try the simple measures
on both the unit and the connected device. If the
problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/
connecting the HDMI cable may solve it. When
reconnecting, be careful not to wind the HDMI cable
since if wound the HDMI cable may not fit well.
After reconnecting, turn off and on the unit and the
connected device.
Resetting the unit to the status at the time of shipment may
solve the problem. If the measures above do not solve the
problem, reset the unit with the following procedure. If you
reset the unit status, your preferences will be reset to the
defaults. Note them down before starting reset.
The remote controller does not work.
rꢀ Be sure to press RCV first before operating the unit with
the remote controller.
z How to reset:
While holding down CBL/SAT on the main unit (note
that step 2 must be performed with this button
pressed down)
1.
2.
There is no sound for multi-zone function.
rꢀ With multi-zone function, sound is output only when the
signal input source is an external component connected
to the analog audio input jacks of the unit, "NET", "USB"
or "BLUETOOTH". Multi-zone playback is not possible if
the player and the unit are connected via HDMI cable or
digital cable. Connect the RCA audio output jacks of the
player and the analog audio input jacks of the unit with
analog audio cable. Also analog audio output setting may
be necessary on the player.
Press ON/STANDBY on the main unit ("Clear"
z
appears on the display and the unit returns to
standby)
The AV receiver turns off unexpectedly.
rꢀ The AV receiver will automatically enter standby mode
when Auto Standby is set and launched.
C l e ar
There’s no sound, or it’s very quiet.
rꢀ A wrong input selector button has been selected. Select
a correct input for the player. Also check that muting is
not on.
Cannot access to network.
rꢀ Try plugging/unplugging the unit or the wireless LAN
router or check their power-on status. This will work well
in many cases.
rꢀ If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
Press ON/
While holding
2.
z
1.
rꢀ Not all listening modes use all speakers.
STANDBY.
down CBL/SAT,
z How to reset the remote controller:
There’s no picture.
rꢀ A wrong input selector button has been selected.
rꢀ Video is not displayed if the listening mode is Pure Audio.
(Asian model)
rꢀ To display video from the connected player on the TV
screen while the unit is in standby, you need to enable
HDMI Through function.
rꢀ When the TV image is blurry or unclear, power cord or
connection cables of the unit may have interfered. In
that case, keep distance between TV antenna cable and
cables of the unit.
While holding down RCV on the remote controller,
press HOME until the remote indicator lights (about
3 seconds)
1.
Bluetooth
rꢀ Try plugging/unplugging the unit and the Bluetooth-
enabled player. After that, check that the Bluetooth
function is enabled on the Bluetooth-enabled device and
the connection with the unit has been established.
Within 30 seconds, press RCV again
2.
Remote
RCV
indicator
HOME
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Specifications
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
Dimensions (W × H × D)
435 mm × 150 mm × 329 mm
17-1/8" × 5-7/8" × 12-15/16"
Weight
Amplifier Section
Rated Output Power
All channels: 65 watts minimum continuous power per channel,
8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of 0.7% (FTC)
90 watts minimum continuous power per channel, 6 ohm loads, 2
channels driven at 1 kHz, with a maximum total harmonic distortion
of 0.7% (FTC)
(North American)
5 ch × 100 W at 6 ohms, 1 kHz,
1 ch driven of 1% (IEC) (Others)
40
7.6 kg (16.8 lbs.) (North American)
8.1 kg (17.9 lbs.) (Others)
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
„
HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR), IN4 (GAME), IN5 (PC),
IN6
IEEE 802.11 b/g/n standard
(Wi-Fi® standard)
Output
OUT
Video Resolution
4K 60 Hz (YCbCr 4:2:0)
Audio Format
DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD,
Dolby Digital Plus, DSD, Multichannel PCM
Supported
Maximum Effective Output Power
2.4 GHz band:
5 ch × 120 W at 6 ohms, 1 kHz,
1 ch driven (JEITA)
(Asian)
1 - 11 ch (North American)
10 - 11 ch (Spain)
10 - 13 ch (France)
1 - 13 ch (Others)
(Wi-Fi® standard)
Dynamic Power (
)
¼
IEC60268-Short-term maximum output power
¼ꢀ
ꢀ
ꢁꢂꢇꢀ9ꢀꢈꢉꢀŝꢆꢀ(TQPVꢊ
ꢁꢋꢌꢀ9ꢀꢈꢍꢀŝꢆꢀ(TQPVꢊ
ꢅꢌꢀ9ꢀꢈꢅꢀŝꢆꢀ(TQPVꢊ
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
4K Passthrough
Bluetooth Section
Communication system
THD+N (Total Harmonic Distortion+Noise)
0.7% (20 Hz - 20 kHz, half power)
Damping Factor
„ Video Inputs
Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)
Maximum communication range
Line of sight approx. 15 m (¼)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs
Component
IN (GAME)
Composite
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX
ꢀ
ꢂꢇꢀꢈ(TQPVꢆꢀꢁꢀM*\ꢆꢀꢅꢀŝꢊ
Input Sensitivity and Impedance (Unbalance)
ꢋꢇꢇꢀO8ꢎꢍꢏꢀMŝꢀꢈ.+0'ꢊ
Rated RCA Output Level and Impedance
ꢋꢇꢇꢀO8ꢎꢋꢃꢋꢀMŝꢀꢈ.+0'ꢀ176ꢊ
Maximum RCA Output Level and Impedance
ꢋꢀ8ꢎꢋꢃꢋꢀMŝꢀꢈ.+0'ꢀ176ꢊ
ꢀ
„ Video Outputs
Component
OUT
Composite
ꢀ
ꢀ
Frequency Response
MONITOR OUT
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
10 dB, 20 Hz (BASS)
SBC
„ Audio Inputs
Transmission range (A2DP)
Digital
10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
¼ꢀ
The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, antenna’s
performance, operating system, software application, etc.
OPTICAL (TV/CD)
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
Analog
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, AUX
ꢀ
ꢂꢀŝꢀꢐꢀꢁꢂꢀŝ
„ Audio Outputs
Analog
ZONE2 LINE OUT
2 SUBWOOFER PRE OUT
Speaker Outputs
Video Section
Input Sensitivity/Output Level and Impedance
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
ꢀ
ꢁꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQPGPVꢀ;ꢊ
ꢇꢃꢏꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQPGPVꢀ2B/CB, PR/CR)
ꢁꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQUKVGꢊ
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, –3 dB
FRONT L/R, CENTER, SURROUND L/R
Phones
PHONES (Front, ø 6.3)
3.2 A (North American)
380 W (Others)
0.1 W (Stand-by, North American)
0.2 W (Stand-by, Others)
55 W (No-sound)
„ Others
Setup Mic
RI
1 (Front)
1
Tuner Section
FM Tuning Frequency Range
USB
1 (Front)
1
Ethernet
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
Specifications and features are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
License and Trademark Information
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby Laboratories.
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio
Inc. and its subsidiaries. All rights reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the
Symbol, & DTS and the Symbol together are registered trademarks of DTS,
Inc. © DTS, Inc. All Rights Reserved.
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a
license from Microsoft.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
"CINEMA FILTER" and "CINEMA FILTER (logo)" are trademarks of Onkyo
Corporation.
Safari is a trademark or registered trademark of Apple Computer, Inc. in the US
and other countries.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarkds of Onkyo
Corporation.
"x.v.Color" is a trademark of Sony Corporation.
"RIHD" and "RIHD (logo)" are trademarks of Onkyo Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
"All other trademarks are the property of theirrespective owners."
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
The Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.
Wi-Fi certified® logo shows international association certifying interoperability
"Wi-Fi alliance" ensures the product has passed the test for compatibility with
other Wi-Fi certified equipment.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.
Other trademarks and trade names are those of their respective owners.
Onkyo does not guarantee Bluetooth compatibility between the AV receiver and
all Bluetooth-enabled devices.
For compatibility between the AV receiver and another device with Bluetooth
technology, consult the device’s documentation and dealer. In some countries,
there may be restrictions on using Bluetooth devices. Check with your local
authorities.
InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks
of Silicon Image, Inc. in the United States and other countries.
Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and
other countries.
Apple TV is a trademark of Apple Inc., registered in the U.S. and other
countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN
The Americas
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
For Product Support Team Only:
1-800-229-1687
Europe
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
China
(Hong Kong)
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
(Mainland)
1301, 555 Tower, No.555 West NanJing Road, Jing’an District, Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo SUPPORT site.
The above-mentioned information is subject to change without prior notice.
Visit the Onkyo web site for the latest update.
D1406-0
SN 29401839
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 8 3 9 *
Download from Www.Somanuals.com. All Manuals Search And Download.
|