U N I V E R S A L R E M OT E C ON T R OL S
URC 6800
Cinema 6+
Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND FUNCTIONS
FEATURE - FUNCTION
The Light (LED) flashes red to show
The illustration below and the chart on the next three pages
describe the features and functions of the Cinema 6+ univer-
sal remote control. Use the drawing to locate each feature of
the remote, then refer to the chart for a description of what
function each feature performs.
that the remote is working and is sending a signal.
The SETUP key is used to program your
Cinema 6+.
The POWER key controls power ON and OFF the
same as the POWER key on your original remote.
Please note that most CD Players do not have an
ON/OFF function on the original remote control. If
this is the case with your CD Player, then POWER
will have no effect on your CD Player.
The TV, VCR, DVD/LD, RCVR, CD and CBL/SAT
keys are used to select the home entertainment
component you want to control. If your component
does not respond when you press a key on the
remote control, press the appropriate device key
(TV, VCR, DVD/LD, RCVR, CD or CBL/ SAT) first to
tell the remote control which component you would
like the remote to operate.
L
L
The VOL (Volume Up), VOL (Volume Down) and
MUTE keys control the volume the same as the
Volume Up and Down and Mute keys on your
original remote.
L
The CH (Channel Up) and CH (Channel Down)
L
keys change channels the same as the Channel Up
and Down keys on your original remote. The
L
CH
/
keys also control the following functions in
L
other modes: DVD/LD mode = Skip Forward/ Skip
Reverse, RCVR and CD mode = Preset Up/Preset
Down.
The Digit keys (0-9) control direct channel access
the same as the Digit keys on your original remote.
The Digit keys (0-9) may also control the following
functions in other modes: RCVR mode = Input
Selections.
The ENTER key operates the same as the Enter key
on your original remote. If your original remote con-
trol required you to use an Enter key to change
channels, use the ENTER key on the Cinema 6+
after entering your channel number. The ENTER key
may also control the following functions in other
mode: RCVR mode = TAPE MON.
The PREV CH (Previous Channel) key operates the
same as the Last Channel or Recall key on your
original remote. The PREV CH key may also control
the following functions in other modes: DVD/LD,
RCVR and CD mode = Random.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The SLEEP key accesses the Sleep Timer of your
home entertainment components (TV, CBL/SAT and
RCVR modes only). Even if your component does
not have a Sleep Timer, the Cinema 6+ may access
its own built-in sleep timer. See page 28 for addition-
al information.
Screen menus. Please consult your home entertain-
ment component’s original owner’s manual for more
detailed instructions on accessing and navigating
your On-Screen menus.
The DISPLAY key operates the Display function of
your home entertainment components.
The REW (Rewind), PL (PLAY), FF (Fast Forward)
REC (Record), STOP, and PAUSE keys operate the
same as the transport keys on your original VCR,
Laser Disc, DVD and CD Player remote. As a safety
feature of the Cinema 6+, you must press the REC
key twice before recording.
The PIP On/Off key accesses your TV’s Picture-in-
Picture feature. The PIP On/Off key may also control
the following functions in other modes: CD
mode =Disk Skip, DVD/LD mode = Subtitle On/Off,
CBL/SAT mode = View.
The SWAP key swaps the Picture-in Picture window
and the TV’s main picture. The SWAP key may also
control the following functions in other modes:
CBL/SAT mode = SAT.
The TV/VCR key operates the same as the TV/VCR
key on your original VCR remote. The TV/VCR key
may also control the following functions in other
modes: TV mode = TV/VIDEO, CBL/SAT mode =
A/B or TV/SAT, DVD/LD mode = TV/LD, RCVR
mode = Input Select, CD mode = A/B.
The MOVE PIP key moves the Picture in-Picture
window around your TV screen. The MOVE PIP key
may also control the following functions in other
modes: DVD/LD mode = Angle, CBL/SAT mode =
Next.
The MENU key operates the same as the MENU or
The SURROUND key operates the same as the
Surround On/Off key on your original remote. The
SURROUND key may also control the following unc-
tions in other modes: VCR mode = Auto Tracking,
DVD/LD mode = Disc, CBL/SAT mode = Favorite
Channel, CD mode = 10+.
OSD (On Screen Display) key on your original
L
remote. Use
,
L
,
and (Menu Up, Down, Left
and Right) to navigate your menus. If your original
remote control had a SELECT key to select options
in your menus, use SEL. Use the EXIT key to
exit/clear your On-Screen menus. Please consult
your home entertainment component’s original
owner’s manual for more detailed instructions on
using On-Screen menus.
The MACRO and MACRO2 keys can sequentially
memorize up to 15 key strokes per key for access
with a single key press. These keys are not mode
specific. See page 26 for more details.
L
The
,
L
,
and (Menu Up, Down, Left and
Right) keys are used to navigate your On-Screen
menus. The
L
,
L
,
and keys may also control
1L, 2L, 3L, and 4L are mode-specific learning keys
that allow you to customize your Cinema 6+ for
unique functions not found on your new remote con-
trol. They
the following functions in other modes: RCVR mode
= Rear Level +/- and Balance Left/Right, CD mode =
Track +/- and Disc +/-.
will accept up to four new functions per device mode
for a total of 24 new functions. See page 22 for addi-
tional details.
The SEL (Select) key selects options in your On-
Screen menus. The SEL key may also control the
following functions in other modes: RCVR mode =
Surround Mode, CD mode = Disc Select, DVD/LD
mode = Chapter.
The EXIT key exits or clears your on screen menus.
The EXIT key may also control the following func-
tions in other modes: RCVR and CD mode =
Open/Close.
The PROG/GUIDE key operates your components
secondary menus as well as your DBS system’s and
L
Cable Converter’s Guide function. Use the
and (Menu Up, Down, Left and Right) keys to
,
,
L
navigate your menus. If your original remote control
had a SELECT key to select options in your menus,
use SEL. Use the EXIT key to exit/clear your On-
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
TV.
INSTALLING THE BATTERIES
Your Cinema 6+ requires four (4) new AAA alkaline batteries.
To install the batteries:
NOTE: If you have tried all the codes listed for your
brand and your TV does not respond, try using the
search method found on page 21.
1.
On the back of the Cinema 6+, pull back on the
tab and lift the battery cover off.
5.
Your Cinema 6+ is now programmed to operate your
TV. Write your TV code in the boxes to the left for
future reference.
2.
Match the + and - marks on the batteries to the
+ and - marks in the battery case, then insert
the
batteries.
Remember, if you want to use your Cinema 6+ to operate
your TV, press the TV key first.
Setup Codes For TVs
Admiral
Aiko
0093, 0179, 0180, 0016, 0047
0092
Akai
Alaron
Ambassador
Ampro
Anam
0030
0179
0177
0751
3.
4.
Press the battery cover back into place.
0180
0019, 0185, 0003
0451, 0092, 0180, 0003
0180
0017, 0030, 0179
0019
0154, 0016
0180
0019
0056, 0030
0030
0054
AOC
Audiovox
Baysonic
Beaumark
Belcor
Bell & Howell
Bradford
Brockwood
Candle
Test the unit by pressing POWER. If the bateries
are inserted correctly, the red light will blink.
NOTE: Removing the batteries will not require you to repro-
gram your remote control because the Cinema 6+ has unlim-
ited memory backup.
Carnivale
Carver
Celebrity
Cineral
0000
0451, 0092
Citizen
0060, 0092, 0030, 0056, 0039
0185
0056
0180, 0185
SETTING UP YOUR COMPONENTS
Clairtone
Concerto
Contec
Programming the Cinema 6+ to operate your TV:
Craig
0180
Crown
Curtis Mathes
CXC
Daewoo
Daytron
Denon
Dumont
Dwin
0180, 0039
0030, 0060, 0154, 0039, 0466, 1147, 1347
0180
0451, 0092, 0019, 0039, 0624
0019
0145
0017, 0019
NOTE: If you are trying to program a TV/VCR combination,
do not perform these instructions. Instead, follow the steps in
“Programming the Cinema 6+ to operate your TV/VCR
Combo starting on page 13.
”
Locate the brand name of your TV in the “Setup Codes For
TVs” section (starting on the next page), and write it in the
space below.
0720, 0774
0000, 0185
Electroband
Emerson
0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,
TV Brand: ________________________________
0282, 0039, 0624
0030
0154, 0159
0179
0171, 0179, 0180
0180
0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347
0019, 0030, 0017
0019, 0030, 0178, 0039
0053, 0056
0179, 0180
0178
0180
0145, 0151, 0056
0054
0054
0000
0053
0180
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
Gibralter
Goldstar
Gradiente
Grunpy
Hallmark
Harvard
Hitachi
Infinity
JBL
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 6+ to operate your TV as follows:
1.
Turn on your TV.
2.
On the Cinema 6+, press TV and release.
Press and hold SETUP until the red light blinks
twice, then release SETUP.
3.
4.
Enter the first four-digit TV code listed for your
brand. If performed correctly, the red light will blink
twice when you enter the final digit.
JCB
JVC
KEC
Kenwood
Aim the Cinema 6+ at your TV and press
0019, 0030
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Kloss
KTV
0024
TMK
Toshiba
0056, 0177, 0178
0156, 0060, 0154
0030, 0180, 0185, 0032
Setup Codes For TVs (continued)
Setup Codes For TVs (continued)
LG
0056
Tosonic
0185
0039
Logik
0016
Totevision
Luxman
LXI
0056
Vector Research 0030
0047, 0054, 0154, 0156, 0178
Victor
0053
Magnasonic
Magnavox
Majestic
Marantz
Matsushita
Megatron
MEI
0179, 0030, 0092, 0093, 0019, 0003, 0054, 0156
0054, 0096, 0187, 0030, 0179, 0171
0016
0054, 0030
0250
0145, 0178
0185
Vidikron
Vidtech
Viking
0054
0019, 0178
0046
Wards
0016, 0019, 0030, 0054, 0056, 0096, 0165, 0178, 0179,
0021
White
Westinghouse 0451, 0463, 0236, 0180, 0624
Memorex
MGA
0056, 0150, 0154, 0016, 0178
0150, 0019, 0030, 0178
Yamaha
Zenith
0019, 0030
0017, 0092, 0016
Midland
Minutz
Mitsubishi
Motorola
MTC
0017, 0047, 0051, 0135, 0039
0021
0150, 0093, 0019, 0178
0093
0060, 0019, 0030, 0056, 0185
0180
0156, 0166, 0178
Programming the Cinema 6+ to operate your VCR:
Locate the brand name of your VCR in the “Setup Codes For
VCRs” section (starting on the next page), and write it in the
space below.
Multitech
NAD
NEC
Nikko
0019, 0030, 0056
0030, 0092, 0178
VCR Brand: ______________________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first.You will use one of these codes to pro-
gram your Cinema 6+ to operate your VCR as folllows:
NTC
Onwa
0092
0180
0250, 0154, 0166
0093, 0165
0236, 0436
0250, 0051
0047, 0156, 0051, 0030, 0019, 0021, 0060, 0135, 0178,
0039, 1347
0054, 0145, 0096, 0019, 0030
0054
Optimus
Optonica
Orion
Panasonic
Penney
1.
2.
Turn on your VCR and play a tape.
On the Cinema 6+, press VCR and release. Press and
hold SETUP until the red light blinks twice, then
release SETUP.
Philco
Philips
Pilot
0019, 0030, 0039
Pioneer
Portland
Prism
Proscan
Proton
0166
0092, 0019, 0039
0051
0047
0178, 0466
0017, 0019
0250, 0051, 0165
0047, 0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039
0047, 0019, 0090, 0135, 1047, 1147, 1247, 1347
0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039
0185
0017, 0030, 0603
0030, 0039
0060, 0019, 0030, 0056, 0178, 0039
3.
4.
Enter the first four-digit VCR code listed for your
brand. If you perform this procedure correctly, the
red light will blink twice when entering the final digit.
Pulsar
or
Aim the Cinema 6+ at your VCR and press POWER.
Your VCR should turn off. If your original VCR
remote control did not have a POWER key, press
STOP. Your VCR should stop. If your VCR does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
VCR.
Quasar
RadioShack
RCA
Realistic
Rhapsody
Runco
Sampo
Samsung
Samsux
Sansei
0039
0451
0154, 0159
0019
NOTE: If you have tried all the codes listed for your
brand and your VCR does not respond, try using the
search method found on page 21.
Sanyo
Scimitsu
Scotch
0178
Scott
0236, 0019, 0178, 0179, 0180
Sears
Semivox
Semp
0047, 0054, 0056, 0154, 0156, 0171, 0178, 0159, 0179
0180
0156
0093, 0165, 0039
5.
Your Cinema 6+ is now programmed to operate your
VCR. Write your VCR code in the boxes to the left
for future reference.
Sharp
Shogun
Signature
Simpson
Sony
Soundesign
Squareview
SSS
0019
0016
0187
0000
0178, 0179, 0180
0171
0019, 0180
0180
0000
0054, 0096, 0030
0171
0093
0250, 0051
0179
0051, 0056
Remember, if you want to use your Cinema 6+ to operate
your VCR, press the VCR key first.
Setup Codes For VCRs
Starlite
Admiral
Adventura
Aiko
0048, 0121, 0184, 0039, 0060, 0202
0000
0278
Supreme
Sylvania
Symphonic
Tandy
Technics
Technol Ace
Techwood
Teknika
Aiwa
Akai
0037, 0000
0041
American High 0035
Asha
0240
0037
0240
0104
Audiovox
Beaumark
Bell & Howell
0054, 0056, 0060, 0092, 0150, 0016, 0019, 0179, 0180,
0039
0056
Telefunken
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Broksonic
Calix
0184, 0209, 0479, 0002, 0121
0037
RadioShack
Radix
0000, 0037, 1037, 1062, 1162, 1262
0037
Setup Codes For VCRs (continued)
Setup Codes For VCRs (continued)
Canon
0035
Randex
RCA
0037
Carver
0081
0060, 0240, 0042, 0035, 0048, 0077, 0149
CCE
Cineral
Citizen
Colt
0072, 0278
0278
0037, 0278
0072
Realistic
Runco
Samsung
Sanky
0000, 0035, 0037, 0046, 0047, 0048, 0066, 0104
0039
0240, 0045
0048, 0039
Craig
0072, 0240, 0037, 0047, 0271
0035, 0041, 0060, 0202
0240
0278, 0045
Sansui
Sanyo
Scott
Sears
Semp
0000, 0041, 0067, 0271, 0479
0104, 0046, 0047, 0054, 0240
0043, 0045, 0121, 0184, 0210
0000, 0035, 0037, 0042, 0046, 0047, 0066, 0104
Curtis Mathes
Cybernex
Daewoo
Denon
0042
0045
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
0000
0037
0037
0032
Sharp
0048
0072
0240
0072
Shintom
Shogun
Singer
Sony
0209, 0184, 0479, 0278, 0000, 0002, 0036, 0037, 0043,
0032, 0033, 0000, 0035
0042
0035, 0081, 0043, 0000, 0110
0000
0041
0000, 0041
0162, 0035
0000, 0035, 0037
0000
0240, 0036, 0208
0043, 0045, 0066, 0210
0037, 0240
0068, 0121, 0184, 0212
0104, 0047, 0066
0033, 0035
0000
0000
0060, 0035, 0048, 0240
0037, 0038
0432, 0526
STS
Fisher
Fuji
Funai
Garrard
GE
Goldstar
Go-Video
Gradiente
Harley Davidson 0000
Harman/Kardon 0038
Harwood
Headquarter
HI-Q
Hitachi
Jensen
JVC
Sylvania
Symphonic
Tatung
TEAC
Technics
Teknika
Thomas
TMK
Toshiba
Totevision
Unitech
Vector Research 0038
Vector 0045
Video Concepts 0040, 0045
0000
0072, 0068, 0072
0046
0047
0041, 0000, 0042
0041
0041, 0067
0037, 0278
0240
Videosonic
Wards
0240
0000, 0035, 0042, 0047, 0048, 0060, 0072, 0081, 0149,
0240
KEC
Kenwood
KLH
0038, 0041, 0067
0072
White
Westinghouse 0278, 0479, 0209, 0184
Kodak
Lloyd’s
Logik
0035, 0037
0000, 0208
0072
XR-1000
Yamaha
Zenith
0000, 0035, 0072
0038
0039, 0000, 0033
LXI
0037
Magnasonic
Magnavox
Magnin
Marantz
Marta
Matsushita
MEI
Memorex
0278, 0179, 0171, 0020, 0037, 0072, 0240
0035, 0081, 0000, 0039, 0110, 0149
0240
0035, 0081
0037
0162, 0035, 0454
0035
0162, 0240, 0035, 0037, 0104, 0000, 0039, 0046, 0047,
0048, 1037, 1062, 1162, 1262
0043, 0240
Programming the Cinema 6+ to operate your TV/VCR
Combo:
Locate the brand name of your TV/ VCR Combo in the
“Setup Codes For TV/ VCR Combos” section (starting on the
next page), and write it in the space below.
TV/VCR Combo Brand: ____________________
MGA
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 6+ to operate your TV/VCR Combo as
follows:
MGN Technology 0240
Minolta
Mitsubishi
Motorola
MTC
0042
0043, 0048, 0067
0035, 0048
0240, 0000
Multitech
NEC
Nikko
Noblex
Olympus
Optimus
Orion
0000, 0072
0038, 0041, 0067, 0104
0037
0240
1.
2.
Turn on your TV/VCR Combo.
Press VCR and release. Press and hold SETUP until
the Cinema 6+’s red light blinks twice, then release
SETUP.
0035
0162, 0048, 0037, 0104, 0454, 1037, 1062, 1162, 1262
0209, 0184, 0479, 0002
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Proscan
Protec
0162, 0035, 0077, 0225, 0454, 1062, 1162, 1262
0035, 0037, 0038, 0042, 0240
0042
0035, 0209, 0479
0035, 0081, 0110
0037
0067, 0162
0060, 0202
0072
0039
0046
0046
3.
4.
Enter the first four-digit TV/VCR code listed for your
brand in the “Setup Codes For TV/VCR Combos”
section. If you perform this procedure correctly, the
red light will blink twice when you enter the final digit
of your code.
Aim the Cinema 6+ at your TV/VCR Combo and
press POWER. The unit should turn off. If it does not
respond, Repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
Pulsar
Quarter
Quartz
Quasar
0162, 0035, 0077, 0454, 1062, 1162, 1262
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV code 0451 for volume control.
TV/VCR Combo.
NOTE: If you have tried all the codes listed for your
brand and your TV/VCR Combo does not respond,
try using the search method found on page 21.
Programming the Cinema 6+ to operate your DVD or
Laser Disc Player:
Locate the brand name of your DVD or Laser Disc Player in
the DVD or Laser Disc Player setup codes (starting on the
next page), and write it in the space below.
5.
Your Cinema 6+ is now programmed to operate your
TV/VCR Combo. Write your TV/VCR Combo code in
the boxes to the left for future reference.
DVD/LD Player Brand: ______________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first.You will use one of these codes to pro-
gram your Cinema 6+ to operate your DVD or Laser Disc
Player as follows:
Remember, to use your Cinema 6+ to operate your TV/VCR
Combo, press the VCR key first.
1.
Turn on your DVD or Laser Disc Player and insert a
disc.
Setup Codes For TV/VCR Combos
American High 0035*
2.
Press DVD/LD and release. Press and hold
Brocksonic
Colt
0002, 0294, 0479
0072
SETUP until the Cinema 6+’s red light blinks twice,
then release SETUP.
Curtis Mathes
Daewoo
Emerson
Funai
0035*
0278*
0002, 0294, 0479
0000
3.
4.
Enter the first four-digit DVD or Laser Disc Player
code listed for your brand. If performed correctly, the
red light will blink twice when entering the final digit.
GE
Hitachi
HQ
0035*, 0060*, 0048*, 0240
0035*, 0000
0000
Lloyds
0000
Aim the Cinema 6+ at your DVD or Laser
Disc Player and press POWER.Your
DVD or Laser Disc Player should turn off. If it does
not respond, repeat steps 2-4, trying each code list-
ed for your brand until you find the one that works.
Magnavox
Magnin
Memorex
MGA
0000, 0035*, 0081*
0240
0037, 0162*
0240
Mitsubishi
Orion
Panasonic
Penney’s
Quasar
RCA
0048*
0002, 0294, 0479
0035*, 0162*
0035*, 0240, 0162*
0035*, 0162*
0035*, 0060*, 0048*
0000, 0479
0240
NOTE: If you have tried all the codes listed for your
brand and your DVD or Laser Disc Player does not
respond, try using the search method found on page
21.
Sansui
Sanyo
Sears
Sony
Symphonic
Zenith
0000, 0037
0032*
0000
5.
Your Cinema 6+ is now programmed to operate your
DVD or Laser Disc Player. Write your DVD or Laser
Disc Player code in the boxes to the left for future refer-
ence.
0000
NOTE: If your TV/VCR works with one of the above codes highlight-
ed with an asterisk (*), you may need to program a separate TV
code to control the volume. Check the list of codes below and follow
the instructions in the “Programming the Cinema 6+ to Operate
Your TV” section to program the supplied TV code.
Remember, to use Cinema 6+ to operate your DVD or Laser
Disc Player, press the DVD/LD key first.
TV/VCRs working on VCR code 0032 may require
TV code 0000 for volume control.
TV/VCRs working on VCR code 0035 may require
TV code 0051 for volume control.
TV/VCRs working on VCR code 0048 may require
TV code 0093 for volume control.
TV/VCRs working on VCR code 0060 may require
TV code 0047 for volume control.
TV/VCRs working on VCR code 0081 may require
TV code 0054 for volume control.
TV/VCRs working on VCR code 0162 may require
TV code 0250 for volume control.
Setup Codes for DVD Players
JVC
0558
Kenwood
Magnavox
Mitsubishi
Onkyo
0534
0503
0521
0503
Panasonic
Philips
Pioneer
Proscan
RCA
0490
0539, 0503
0525, 0571
0522
0522
Samsung
Sony
0573
0533
TV/VCRs working on VCR code 0278 may require
Technics
Toshiba
Yamaha
Zenith
0490
0503
0490, 0545
0503, 0591
Setup Codes for Laser Disc Players
Denon
Mitsubishi
NAD
0059
0059
0059
15
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pioneer
Sony
0059
0193, 0201
Onkyo
Optimus
Panasonic
0135, 0380
0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801
0039, 0309, 0518
Programming the Cinema 6+ to operate your Receiver/Tuner:
Setup Codes For Receivers/Tuners (continued)
Penney
Philips
Pioneer
Quasar
RCA
0195
0189
Locate the brand name of your Receiver/Tuner in the “Setup
Codes For Receiver/Tuners” section (starting below page),
and write it in below.
0014, 0080, 0150, 0531, 0630, 1023
0039
0054, 0360, 0531, 0530
Receiver/Tuner Brand: ______________________
Realistic
Sansui
Scott
0181, 0195
0189
0322
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 6+ to operate your Receiver/Tuner as
follows:
Sharp
0186
Sherwood
Sony
0491, 0502
0158**, 0474
Soundesign
TEAC
0670
0463
1.
2.
Turn on your Receiver/Tuner.
Technics
Victor
0039, 0309, 0518
0074
Press RCVR and release. Press and hold SETUP
until the Cinema 6+’s red light blinks twice, then
release SETUP.
Wards
Yamaha
Yorx
0014, 0042, 0054, 0080, 0158, 0189
0176, 0186
0195
Zenith
0857
3.
4.
Enter the first four-digit Receiver/Tuner code listed
for your brand in the “Setup Codes For
Receivers/Tuners” section. If performed correctly, the
red light will blink twice when you enter the final
digit.
**May use Misc. Audio code 0159 to operate surround and tuner presets.
See page 23 for misc. audio setup and codes.
Programming the Cinema 6+ to operate your CD Player:
Locate the brand name of your CD Player in the “Setup Codes
For CD Players” section (starting on the next page), and write
it in the space below.
Aim the Cinema 6+ at your Receiver/Tuner and press
POWER. The unit should turn off. If it does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find one that works.
CD Player Brand: __________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 6+ to operate your CD Player as fol-
lows:
NOTE: If the unit still does not respond, try using the
search method on page 21.
5.
Your Cinema 6+ is now programmed to operate your
Receiver/Tuner. Write your
Receiver/Tuner code in the boxes to the left for
future reference.
1.
2.
Turn on your CD Player and insert a disc.
Press CD and release. Press and hold SETUP until
the Cinema 6+’s red light blinks twice, then release
SETUP.
3.
4.
Enter the first four-digit CD Player code listed for
your brand. If performed correctly, the red light will
blink twice when you enter the final digit of your
code.
Remember, to use your Cinema 6+ to operate your
Receiver/Tuner, press the RCVR key first.
Setup Codes For Receivers/Tuners
ADC
Akai
Aiwa
0531
0076
Aim the Cinema 6+ at your CD Player and press PL
(Play).Your CD Player should play your disc. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
operates your CD Player.
0121, 0158, 0189, 0405
Bang & Olufsen 0898
Capetronic
Carver
0531
0008, 0042, 0189, 0360
Casio
0195
Clarinette
Curtis Mathes
Denon
0195
0039, 0080
0004
NOTE: If you have tried all the codes listed for your
brand and your CD Player does not respond, try
using the search method found on page 21.
Fisher
Garrard
0042, 0360
0463
Harman/Kardon 0110, 0891, 0189
JBL
JVC
Kenwood
Linn
Lloyd’s
LXI
0110
0074
5.
Your Cinema 6+ is now programmed to operate your
CD Player. Write your CD Player code in the boxes
to the left for future reference.
0027, 0313, 0314, 0186, 0042
0189
0195
0181
Magnavox
Marantz
MCS
0189, 0195, 0531, 0391
0039, 0189
0039
Modulaire
NAD
0195
0320
Nakamichi
0097
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remember, if you want to use your Cinema 6+ to operate
your CD Player, press the CD key first.
gram your Cinema 6+ to operate your Cable Converter or
Satellite Receiver as follows:
Setup Codes For CD Players
1.
2.
Turn on your Cable Converter or Satellite Receiver.
Aiwa
0124, 0157
Bang & Olfusen 0212
Press CBL/SAT and release. Press and hold SETUP
until the Cinema 6+’s red light blinks twice, then
release SETUP.
Burmester
California Audio
Lab
0420
0029
Carver
Denon
DKK
0157, 0179, 0437
0003, 0873
0000
3.
4.
Enter the first four-digit Cable Converter or Satellite
Receiver code listed. If you perform this procedure
correctly, the red light will blink twice when you enter
the final digit of your code.
Emerson
Fisher
Garrard
Genexxa
Harman/Kardon 0173
Hitachi
H/K
JVC
Kenwood
Krell
Linn
LXI
0305
0174, 0179
0393, 0420
0032, 0305
Aim the Cinema 6+ at your Cable Converter or
Satellite Receiver and press POWER.Your Cable
Converter or Satellite Receiver should turn off. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
operates your Cable Converter or Satellite Receiver.
0032
0157
0072
0028, 0037, 0190, 0826, 0681
0157
0157
0305
Magnavox
Magnavox CD-R 0626
Marantz
MCS
Mission
MTC
0157, 0305
NOTE: If you have tried all the codes listed for your
brand and your Cable Converter or Sateliite
Receiver does not respond, try using the search
method found on page 21.
0029, 0157, 0180
0029
0157
0420
Nikko
NSM
0174
0157
0101, 0868
5.
Your Cinema 6+ is now programmed to operate your
Cable Converter or Satellite Receiver. Write your
Cable Converter or Satellite Receiver code in the
boxes to the left for future reference.
Onkyo
Optimus
Panasonic
Philips
Pioneer
Proton
QED
0000, 0032, 0037, 0145, 0179, 0305, 0420, 0437, 0468
0029
0157, 0626
0032, 0468, 0244, 0305
0157
0157
Quasar
RCA
Realistic
Rotel
0029
Remember, if you want to use your Cinema 6+ to operate
your Cable Converter or Satellite Receiver, press the
CBL/SAT key first.
0764, 0053, 0179, 0305
0179, 0180, 0420
0157, 0420
0157
SAE
Sansui
Sanyo
Scott
Sears
Sharp
Sherwood
Sony
Soundesign
Tascam
TEAC
Technics
Victor
Wards
Yamaha
Yorx
0157, 0305
0179
0305
0305
0037, 0180, 0861
0180
0000, 0185, 0490, 0604, 0605
0145
Setup Codes for Cable Converters
ABC
0003, 0008, 0014, 0007, 0001, 0011, 0013, 0017
Allegro
Gantronix
Archer
0153, 0315
0022, 0207
0797, 0153, 0022, 0207
0056
Belcor
Cable Star
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comtronics
Contec
0056
0022
0022
0153
0153, 0315
0031
0040
0420
0174, 0180, 0393, 0420
0029
0072
0157, 0053
0036, 0187
0461
0019
Digi
0637
Eastern
Emerson
Everquest
Focus
Garrard
GC Electronics 0056, 0207
Gemini
General
Instrument
0002
0797
0015, 0040
0400
0153
Programming the Cinema 6+ to operate your Cable
Converter or Satellite Receiver:
Locate the brand name of your Cable Converter or Satellite
Receiver in the “Setup Codes for Cable Converters” or “Setup
Codes for Satellite Receivers” section (starting on the next
page), and write it in either space below.
0015
0476, 0003, 0014, 0011, 0276, 0810
Goldstar
Goodmind
Hamlin
Hitachi
Hytex
Jasco
Jerrold
Linsay
0144, 0040
0797
0259, 0009, 0020, 0034
0011
0007
0153, 0315, 0015
0476, 0003, 0014, 0011, 0012, 0015, 0810
0440
Cable Converter Brand: ________________________________________________________
or
Satellite Receiver Brand: ____________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first.You will use one of these codes to pro-
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnavox
Memorex
Movie Time
Novaplex
0027, 0014
0000
0063, 0156
0618
Toshiba DBS
Uniden DBS
Zenith
0790
0724, 0722
0856
SEARCHING FOR YOUR CODE
Setup Codes for Cable Converters (continued)
NSC
Oak
0063, 0156
0007, 0019
0021
0021, 0107, 0000
0637
0000
0153, 0027, 0031
0144, 0023, 0533
If your TV, VCR or Cable Converter does not respond to the
Cinema 6+ after trying all of the codes listed for your brand, or
if your brand is not listed at all, try searching for your code. For
example, after trying all of the codes for your TV, you still can-
not get the Cinema 6+ to operate your TV, then:
Optimus
Panasonic
Panther
Paragon
Philips
Pioneer
Popular
Mechanics
Prelude
Pulsar
1.
2.
Turn on your TV.
0400
0770
0000
Press TV and release. Press and hold SETUP until the
Cinema 6+’s red light blinks twice, then release
SETUP.
RadioShack
RCA
0015, 0315, 0797, 0833
0021
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
Samsung
Scientific Atlanta 0477, 0008, 0017
Seam
Signal
Signature
SL Marx
Sprucer
Starcom
Stargate
Starquest
Sylvania
Tandy
Teleview
Texscan
TFC
Timeless
Tocom
0207
0400
0259, 0020
0002
0011
3.
4.
Press 9 - 9 - 1.
Slowly alternate between pressing POWER* and TV
until your TV turns OFF. Make sure that the Cinema
6+ is aimed at your TV during the search.You may
have to press this sequence of buttons (POWER*
then TV) up to 100 times to search the entire library
of codes.
0000
0144, 0040
0510
0015, 0040
0011
0040
0021
0003, 0015
0015, 0040, 0797
0015
0001
0258
0040
0001
0310
0418
0012, 0013
0000
5.
When your TV turns OFF, press and release SETUP
to lock in the code for your TV.Your Cinema 6+ is
now programmed to operate your TV.
*If you are searching for your VCR, CD, LD or DVD Player
code, you may want to play a tape or disk and use the STOP
key instead of the POWER key to search for your code.
When your VCR stops, press SETUP to lock in your code.
NOTE: To search for the codes of your other components,
repeat Steps 1 through 5, only substitute the appropriate
device key (ie., VCR, DVD/LD, RCVR, CD or CBL/SAT) for
the component you are searching for.
Toshiba
Tusa
TV86
0015
0063
0153, 0022, 0207
0007
Unika
United Artists
United Cable
Universal
Videoway
Viewstar
Zenith
0003
0153, 0022, 0056, 0191, 0207
0250
0063, 0027, 0258
0525, 0000, 0015, 0207, 0008
0400
RETRIEVING THE CODES PROGRAMMED INTO THE
Cinema 6+
If you have set up the Cinema 6+ using the “SEARCHING
FOR YOUR CODE” procedure, you may want to figure out
which four-digit code is operating your equipment. Use this
procedure after you have set up your components to find out
which four-digit code is operating your equipment. For exam-
ple, to find out which code is operating your TV after setting
up your TV using the “SEARCHING FOR YOUR CODE”
procedure:
Zentek
Setup Codes for Satellites
AlphaStar DBS 0772
Chaparral
Echostar DBS
ExpressVu DBS 0775
General
Instrument
Hitachi DBS
HTS DBS
Hughes Network
Systems DBS 0749
Jerrold Primestar 0627
0216
0775
0361, 0627, 0869
0819
0775
1.
Press TV and release. Press and hold SETUP until the
Cinema 6+’s red light blinks twice, then release
SETUP.
Jerrold
JVC
0361
0775
2.
3.
Press 9 - 9 - 0.
Magnavox DBS 0722, 0724
Memorex DBS 0724
Panasonic DBS 0701
Philips DBS
Primestar
Proscan
For the first digit of your four-digit code, press 1 and
count the number of times the red light (LED) blinks
on the Cinema 6+. If the light does not blink when
you press the number 1, the digit is zero.
0722, 0724
0361, 0627
0566
0566, 0143, 0855
0639
RCA DSS
Sony DBS
Star Choice DBS 0869
STS 0210
4.
For the second digit, press 2 and count the number
of times the red light (LED) blinks on the Cinema 6+.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
If the light does not blink when you press the num-
ber 2, the digit is zero.
Cinema 6+ blinks twice. (If the red light does not blink
twice, stop and repeat steps 1 through 6.)
5.
6.
For the third digit, press 3 and count the number of
times the red light (LED) blinks on the Cinema 6+. If
the light does not blink when you press the number
3, the digit is zero.
NOTE: You can now repeat steps 3 through 6 to learn func-
tions on the other L keys.
7.
Press and hold in the SETUP key until the Cinema
6+’s red light flashes twice to lock in your new fea-
ture. (If the red light does not blink twice, stop and
repeat steps 1 through 6).
For the fourth and final digit, press 4 and count the
number of times the red light (LED) blinks on the
Cinema 6+. If the light does not blink when you
press the number 4, the digit is zero. Now you have
your four-digit code.
8.
To test the new feature, press and release the
Device key in which the feature was learned followed
by the L key on which the feature was learned.
NOTE: To find out the code for your other components,
repeat Steps 1 through 6, only substitute the appropriate
device key (VCR, DVD/LD, RCVR, CD or CBL/SAT) for the
component code you wish to learn.
Deleting Functions from the L Keys:
1.
Press and hold in the SETUP key until the Cinema
6+’s red light flashes twice and then release the
SETUP key.
LEARNING FUNCTIONS ONTO THE 1L, 2L, 3L AND 4L
KEYS
2.
3.
Enter in 9 - 7 - 6.
The 1L, 2L, 3L and 4L keys can be used to customize those
functions that are unique to your home entertainment needs.
For example, the Cinema 6+ does not offerTracking Up or
Down for a VCR. With the learning feature on the Cinema 6+,
you can add these functions and many others learned from
your original remote control.
Press and release the Device key (e.g., TV) where
the learned feature to be deleted is stored.
4.
Press the L key to be deleted twice. The Cinema
6+’s red light will blink twice after the second press
of the L key.
NOTE: Please have your original remote controls handy before
performing learning on the Cinema 6+.
1.
Press and hold SETUP until the Cinema 6+’s red
light blinks twice, then release
SETUP.
SETTING UP OTHER COMPONENTS
In addition to the components labeled on the device keys
(TV, VCR, DVD/LD, CBL/SAT, etc.), the Cinema 6+ can also
operate the following components: Cassette Decks, Infrared
Home Automation, MiniDisc, Video Accessories, Amplifier
and Miscellaneous Audio Components (Graphic Equalizers
and Digital Music Service Boxes).
2.
3.
Press 9 - 7 - 5. The Cinema 6+’s red light will blink
twice.
Press and release the Device key in which you want to
learn a feature (e.g., TV).
The Setup Codes for these components can be accessed
under the following device keys:
NOTE: Steps 4 through 6 need to be completed within 10
seconds. Please read the next three steps before proceed-
ing.
Cassette Decks:Use the VCR Key
IR Home Automation: Use the CD Key
4.
Press and release the L key in which the new fea-
ture is to be learned. The Cinema 6+’s red light will
flash rapidly.
MiniDisc:
Use the CD Key
Video Accessories:
Use the CBL/SAT Key
(Note : WebTV found under Video Accessories)
Amplifier Use the RCVR Key
5.
Align your original remote control with the arrow mark
to the left of the LED2o" n your Cinema 6+ remote con-
trol (see diagram below)
Miscellaneous Audio: Use the RCVR Key
For example, to set up a Cassette Player on the VCR key:
1.
2.
Turn on your Cassette Player and insert a tape.
Press VCR and release. Press and hold SETUP until
the Cinema 6+’s red light blinks twice, then release
SETUP.
3.
Enter the first four-digit Cassette Player code listed
for your brand in the “Setup Codes For Audio
Cassettes” section. If you perform this procedure
6.
On your original remote, press and hold the key (fea-
ture) you want to learn until the red light on the
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Fisher
0052
correctly, the red light will blink twice when you enter
the final digit of your code.
Harman/Kardon 0477
Jerrold
JVC
0459, 0520
0073
0376
0056
Nikko
RCA
4.
5.
Aim the Cinema 6+ at your Cassette Player and
press PL (Play).Your unit should play the tape. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
works.
Scientific Atlanta 0460
Sony
0010, 0159
0459
Starcom
RE-ASSIGNING DEVICE KEYS
You can use the Cinema 6+ to operate a second TV or a
second VCR or any combination of six home entertainment
components. For example, you may want your Cinema 6+ to
control 1 Cable Converter, 1 Receiver, 1 CD Player, 1 DVD
Player and 2 VCRs. To accomplish this, you must re-assign
one of the device keys to operate the desired component, in
this case, a second VCR. The chart below shows you how to
re-assign a particular device key and then set up your new
component.
Your Cinema 6+ is now programmed to operate your
Cassette Player.
Remember, if you want to use your Cinema 6+ to operate
your Cassette Player, press the VCR key first.
Setup Codes For Audio Cassettes
Aiwa
0029, 0197
Bang & Olufsen 0219
Carver
Denon
0029
0076
TV to VCR
SETUP* - 992 - VCR - TV - TV - SETUP* - VCR
code
Harman/Kardon 0182
JVC
0244
TV to DVD/LD
TV to RCVR
TV to CD
SETUP* - 992 - DVD/LD - TV - TV - SETUP* - DVD
or LD Player code
Magnavox
Marantz
Optimus
Philips
Pioneer
Sansui
Sony
0029
0029
0027, 0220
0029
SETUP* - 992 - RCVR - TV - TV - SETUP* - Audio
code
0027, 0220
0029
0170, 0243, 0291
0273
SETUP* - 992 - CD - TV - TV - SETUP* - CD
Player code
Victor
Wards
Yamaha
0027
0097
TV to CBL/SAT
VCR to TV
SETUP* - 992 - CBL/SAT - TV - TV - SETUP* -
Cable/DBS code
Setup Codes For IR Home Automation
GE
0240
SETUP* - 992 - TV - VCR - VCR - SETUP* - TV
code
Lutron
0318, 0597
0167
One For All
RadioShack
0240
Security System 0167
VCR to DVD/LD SETUP* - 992 - DVD/LD - VCR - VCR - SETUP* -
Universal X10
X10
0167
0167
DVD/LD Player code
VCR to RCVR
VCR to CD
SETUP* - 992 - RCVR - VCR - VCR - SETUP* -
Audio code
Setup Codes For MiniDisc
Denon
JVC
0873
0826, 0681
0868
SETUP* - 992 - CD - VCR - VCR - SETUP* - CD
Player code
Obkyo
Sharp
Sony
0861
0490
VCR to CBL/SAT SETUP* - 992 - CBL/SAT - VCR - VCR - SETUP* -
Setup Codes For Video Accessories
Cable/DBS code
Archer
0160
GC Electronics 0160
DVD/LD to TV
SETUP* - 992 - TV - DVD/LD - DVD/LD - SETUP* -
TV code
Jebsee
0160
Magnavox Web-TV 0818
Philips Web TV 0818
DVD/LD to VCR SETUP* - 992 - VCR - DVD/LD - DVD/LD -
RadioShack
TeleCaption
Sony Web-TV
0160
0171
0850
SETUP* - VCR code
DVD/LD to RCVR SETUP* - 992 - RCVR - DVD/LD - DVD/LD -
Setup Codes For Integrated Amplifiers/
SETUP* - Audio code
Preamplifiers/Amplifiers
Aiwa
0406
0269
0300
0160
0078
DVD/LD to CD
SETUP* - 992 - CD - DVD/LD - DVD/LD - SETUP*
- CD Player code
Carver
Curtis Maths
Denon
GE
DVD/LD to CBL/SAT SETUP* - 992 - CBL/SAT - DVD/LD - DVD/LD -
Harman/Kardon 0892
JVC
Linn
SETUP* - Cable/DBS code
0331
0269
RCVR to TV
code
SETUP* - 992 - TV - RCVR - RCVR - SETUP* - TV
Luxman
Magnavox
Marantz
Nakamichi
Optimus
Panasonic
Pioneer
Realistic
Sansui
0165
0269
0269, 0321
0321
RCVR to VCR
SETUP* - 992 - VCR - RCVR - RCVR - SETUP* -
VCR code
0013, 0300, 0395
0308
RCVR to DVD/LD SETUP* - 992 - DVD/LD - RCVR - RCVR - SETUP*-
0013, 0300
0395
DVD/LD Player code
0321
Sony
0220, 0689
0078
RCVR to CD
SETUP* - 992 - CD - RCVR - RCVR - SETUP* -
CD Player code
Soundesign
Technics
Victor
0308
0331
RCVR to CBL/SAT SETUP* - 992 - CBL/SAT - RCVR - RCVR -
Wards
Yamaha
0013, 0078
0354
SETUP* - Cable/DBS code
Setup Codes For Miscellaneous Audio
CD to TV
SETUP* - 992 - TV - CD - CD - SETUP* - TV code
Aiwa
0010, 0159, 0404
CD to VCR
SETUP* - 992 - VCR - CD - CD - SETUP* - VCR
code
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD to DVD/LD
CD to RCVR
SETUP* - 992 - DVD/LD - CD - CD - SETUP* -
DVD or LD Player code
2.
3.
Press 9 - 9 - 3. The Cinema 6+’s red light will blink
twice.
SETUP* - 992 - RCVR - CD - CD - SETUP* - Audio
code
L
L
Press and release TV. The Cinema 6+’s red light will
blink twice.
CD to CBL/SAT
CBL/SAT to TV
SETUP* - 992 - CBL/SAT - CD - CD - SETUP* -
Cable/DBS code
SETUP* - 992 - TV - CBL/SAT - CBL/SAT -
SETUP* - TV code
Now, whenever you press VOL , VOL
or MUTE in the
VCR, DVD/LD and CBL/SAT modes your TV will control the
volume. If you would like to change the Volume Lock setting to
the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3, only
substitute the appropriate device key. Setting the Volume Lock
to the TV, VCR, DVD/LD or CBL/SAT mode will not effect the
volume control in the RCVR and CD mode.
CBL/SAT to VCR SETUP* - 992 - VCR - CBL/SAT - CBL/SAT -
SETUP* - VCR code
CBL/SAT to DVD/LD SETUP* - 992 - DVD/LD - CBL/SAT - CBL/SAT -
SETUP* - DVD or LD code
CBL/SAT to RCVR SETUP* - 992 - RCVR - CBL/SAT - CBL/SAT -
SETUP* - Audio code
You can also change the Volume Lock setting so that an
Audio component controls the volume in all device modes.
CBL/SAT to CD SETUP* - 992 - CD - CBL/SAT - CBL/SAT -
SETUP* - CD Player code
To change the Volume Lock setting on the Cinema 6+ to the
RCVR mode:
*NOTE: Here (*) you must hold SETUP until the Cinema 6+’s
red light blinks twice.
1.
2.
3.
Press and hold SETUP until the Cinema 6+’s red
light blinks twice, then release SETUP.
PROGRAMMING THE MACRO KEYS
or
Press 9 - 9 - 3. The Cinema 6+’s red light will blink
twice.
The Cinema 6+ has two Macro keys (MACRO and
MACRO2) that allow the user to play back a series of key-
strokes, at any time, with the press of one key. For example,
to set up a sequence that will turn on your components and
change the components to the proper inputs:
L
L
Press and release RCVR. The Cinema 6+’s red light
will blink twice.
1.
Press and hold SETUP until the Cinema 6+’s red
light blinks twice, then release SETUP.
Now, whenever you press VOL , VOL or MUTE your
Audio component will control the volume in all device modes.
You can also change the Volume Lock setting so that each
component controls its own volume. However, some compo-
nents do not have volume control. Using this setting may
eliminate volume control in some device modes. To change
the Volume Lock setting on the Cinema 6+ so each mode
controls its own volume:
2.
3.
Press 9 - 9 - 5. The Cinema 6+’s red light will blink
twice.
Press and release one of the MACRO keys. This will
be the key that will play back the series of key-
strokes assigned to that key.
4.
Begin entering the sequence of keystrokes, up to 15,
that you wish to be played back when you press the
MACRO key. For example:
1.
2.
3.
Press and hold SETUP until the Cinema 6+’s red
light blinks twice, then release SETUP.
L
Press 9 - 9 - 3. The Cinema 6+’s red light will blink
RCVR – POWER – TV – POWER – TV/VCR (To
change the input on the TV to VIDEO 1) – CBL/SAT
– POWER.
twice.
L
L
Press and release VOL . The Cinema 6+’s red
light will blink twice.
5.
Once your sequence is entered, press and hold
SETUP until the Cinema 6+’s red light blinks twice.
Now, whenever you press press VOL , VOL or MUTE on
the Cinema 6+ each component will control its own volume,
provided each component has volume control.
Now, using the example as above, whenever the pro-
grammed MACRO key is pressed, the Receiver would power
ON, the TV will power ON and change the input to VIDEO 1
and then the Satellite would power ON.
Repeat steps 1 - 5 to then setup a second sequence on the
MACRO2 key.
VOLUME LOCK
Volume Lock allows the user to designate which component
will control the volume in the TV, DVD/LD and CBL/SAT
modes. To set the Volume Lock to the TV mode:
1.
Press and hold SETUP until the Cinema 6’s red light
blinks twice, then release SETUP.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Problem
Solution
Red light does not
Replace the batteries with four (4) new AAA alka-
blink when you press line batteries.
a key?
USING THE SLEEP KEY
The SLEEP key allows you to access the sleep timer of your
TV, Cable Converter/DBS Satellite or Audio component.You
can access your TV, Cable Converter, DBS Satellite or Audio
component’s Sleep Timer by pressing the SLEEP key. Most
Sleep Timers advance in increments of 10 or 15 minutes,
however, for specific instructions on setting your components
Sleep Timer, please consult your original owner’s manual.
The Cinema 6 does
not operate your
home entertainment
components or is not tionality, however, only one setup code will operate
performing com-
mands properly?
Try all of the codes listed for your brand of home
entertainment component in the “Setup Codes” sec-
tion. Many setup codes may allow for partial func-
your home entertainment component correctly.
Make sure that all of the components you are
setting up can be operated with an infrared
remote control.
Problems program-
ming a TV/VCR
combo?
Try the VCR set-up codes for your brand. However,
some combo units may require both a TV code for
volume control and a VCR code for the remaining
functions.
Even if your original Cable Converter remote control did not
have a sleep timer, your Cinema 6+ has its own built-in sleep
timer. If your Cable Converter does not have a sleep timer,
press the SLEEP key to activate the Cinema 6+’s built-in
sleep timer. For example:
VCR not recording?
As a safety feature on the Cinema 6, you must
press the REC key twice.
1.
Press and release the CBL/SAT key then press the
SLEEP key once to set the Cinema 6+’s built-in
sleep timer for 15 minutes. The red light will blink
once.
L
CHL/ and PREV
Due to RCA design (1983-1987), only the original
remote control will operate these functions.
CH not working for
your RCA TV?
2.
Each additional press of the SLEEP key will add 15
more minutes to the Sleep Timer, up to a maximum
of 60 minutes. The LED will blink twice when the
sleep timer is set for 30 minutes, 3 times for 45 min-
utes, or 4 times for 60 minutes.
Problems changing
channels?
If your original remote control required an Enter
keystroke when changing channels, press the
ENTER key on the Cinema 6 after you enter the
channel number.
NOTE: The sleep timer starts 10 seconds after
The red light blinks
when you press a
key but you receive
no response from
your home
Make sure you are aiming your Cinema 6 at your
home entertainment component and that you are
within 15 feet before using your remote.
the last press of the SLEEP key. Once you have activated
the Cinema 6+’s built-in sleep timer, you must keep the
remote control aimed directly at the component.
3.
To de-activate the built-in sleep timer,press POWER.
entertainment
component?
NOTE: Plugging your TV into the outlet on the back of the
Cable Converter may allow you to turn both your Cable
Converter and TV ON and OFF.
Cinema 6 not learn-
ing a command from
your original remote
control?
Make sure your remote controls are nose-to-nose
and are no more than 2 inches apart (see diagram
in step 5 on page 22).
Tried “Search
Method” and still did
not find the code?
Try the “Search Method” again after clearing out the
device key as follows: Press and hold SETUP until
red light blinks twice, then release. Next enter 9 -9 -
2. Then press and release the device key to be
cleared twice.
Sony’s Picture In
Picture (PIP) won’t
turn off?
Press TV once. Press and hold SETUP until red
light blinks twice, then release. Enter 9 - 9 - 4 and
press SETUP once. Then enter 6 -2 -1 and press
PIP On/Off. The red light should blink twice. PIP
should operate properly now.
Sharp’s Picture In
Picture (PIP) won’t
work properly?
Sharp’s PIP feature requires separate PIP functions
for “on” and “off”.
For PIP “on”, press TV once. Press and hold SETUP
until red light blinks twice, then release. Enter 9- 9-4
and press SETUP once. Enter 3- 4-8 and press PIP
On/Off. The red light should blink twice. PIP “on”
should operate properly now.
For PIP “off”, press TV once. Press and hold
SETUP until red light blinks twice, then release.
Enter 9- 9-4 and press SETUP once. Enter 6-0-6
and press SETUP PIP On/Off. The red light should
blink twice. PIP “off” should operate by pressing
SETUP then the PIP key.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ONE FOR ALL PRODUCTS
TROUBLE SHOOTING (continued)
Limited Warranty
Problem
Solution
One For All (“OFA”) warrants, to the original purchaser only, that this
product will be free from defects in materials and workmanship, under
normal use, for ninety (90) days from the date of original purchase.
Surround on Sony
receiver will not
turn on?
Press RCVR once. Press and hold SETUP until red
light blinks twice, then release. Enter 9- 9-4 and
press SETUP once. Enter 3- 9-8 and press SUR-
ROUND. Red light should blink twice. Surround
should operate now.
This warranty does not cover damage or failures caused by products
or services not supplied by OFA, or which result from accident, mis-
use, abuse, neglect, mishandling, misapplication, faulty installation,
set-up adjustment, improper maintenance, alteration, maladjustment
of consumer controls, modifications, commercial use, or that is attrib-
utable to acts of God.
Sony receiver will
turn off but not
back on?
Try using the number pad on the Cinema 6 to turn
the receiver back on. For example, try pressing 0 to
turn on in the CD mode, or 4 to turn on in the Video
1 mode. Other numeric keys will also turn the receiv-
er on. If this doesn’t work, try the following:
There are no express warranties except as listed above. OFA SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAM-
AGES RESULTING FROM THE USE OF THIS PRODUCT OR ARIS-
ING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied war-
ranty lasts, so the above exclusions or limitations may not apply to
you. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Press RCVR once. Press and hold SETUP until red
light blinks twice, then release. Enter 9- 9 -4 and
press SETUP once. Then enter 5- 9 -1 and press
POWER. The red light should blink twice. Power
should operate properly now.
Audio component
not fully-operational?
Audio functionality may be split between codes. For
example, Pioneer’s Tuner code 0014 works tuner
presets, but only Amplifier code 0013 works power
and volume. This also true for Sony’s Receiver code
0158 and Misc. Audio code 0159.
If some functionality is missing, try other codes to
see if functionality resides there.
To obtain warranty service for a defective product during the warranty
period, please return the product, preferably in the original carton,
along with your purchase receipt, to the store of original purchase. A
note detailing the complaint would be helpful. The store, at its option,
will replace or repair this product if found to be defective.
Mini-system, book-
shelf, or boombox
not working?
These systems may operate using a CD or Misc.
Audio code. If the original remote control did not
have a power key, press PL (or STOP) to turn on
(or off) the system.
One For All
(330)-405-8655
Consumer Help Line : 1-330-593-3335
E-Mail Address : [email protected]
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright 1999 by Universal Electronics Inc. No part of this publica-
tion may be reproduced, transmitted, transcribed, stored in any
retrieval system, or translated to any language, in any form or by
any means, electronic, mechanical, magnetic, optical, manual, or
otherwise, without the prior written permission of Universal Elec-
tronics Inc.
One For All and Cinema 6 are trademarks of Universal Electronics
Inc.
One For All is designed for compatibility in North America excluding
Mexico.
URC-6800-Cinema 6+
1/01
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|