R
INSTRUCTION MANUAL
MANUAL INFLATION
BLOOD PRESSURE MONITOR
Model
HEM-432C
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing the Omron HEM-432C Manual Inflation
Blood Pressure Monitor.
Fill-in for future reference
DATE PURCHASED: ______________
SERIAL NUMBER: ________________
Staple your purchase receipt here.
The monitor features an easy-to-squeeze inflation bulb that allows
you to quickly inflate the cuff. The measurement reading is clearly
displayed on a large digital panel.
Omron digital blood pressure monitors use the oscillometric method
of blood pressure measurement. This means the monitor detects
your blood’s movement through your brachial artery and converts the
movements into a digital reading. An oscillometric monitor does not
need a stethoscope so the monitor is simple to use.
The Omron HEM-432C Manual Inflation Blood Pressure Monitor
is intended for home use.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTES
To assure the correct use of the product basic safety measures should
always be followed including the precautions listed below:
ꢀ Read all information in the instruction book and any other literature
included in the box before using the unit.
ꢀ Contact your physician for specific information about your blood
pressure. Follow the instructions of your healthcare provider.
ꢀ Operate the unit only as intended. Do not use for any other purpose.
ꢀ The unit is intended for use in measuring blood pressure and pulse
rate in adult patient population. Do not use on infants.
ꢀ Do not use a cellular phone near the unit. It may result in
operational failure.
ꢀ Changes or modifications not approved by Omron Healthcare will
void the user warranty. Do not disassemble or attempt to repair the
unit or components.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
KNOW YOUR UNIT
Systolic Blood Pressure Display
MEMORY Button
Diastolic Blood Pressure /
ON/Off Button
Pulse rate Display
Arm Cuff
Air Release Button
Air
Inflation Bulb
Air Tube
Air Tube
Air Tube
(Connects to
the air plug)
(Connects to
the air plug)
Air Plug
Air Plug
5
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE GUIDE
1. Avoid eating, smoking, and exercising for at least 30 minutes before
taking a measurement.
2. Put your left arm through the cuff loop. The bottom of the cuff
should be about 1/2 inch above the elbow. The cuff tab should lie
over the brachial artery on the inside of the arm.
3. Pull the cuff so that it is tightened evenly around your arm. Insert one
finger under cuff to check fit. Press the sewn hook material firmly
against the pile side of the cuff. Make sure that your skin will not be
pinched in the D-ring once you inflate the cuff. Immediately deflate
the cuff and readjust it if skin becomes pinched.
4. Sit in a chair with your feet flat on the floor and place your left arm
on a table so that the cuff is at the same level as your heart.
5. Turn the monitor on, and after the Ready To Measure Symbol (
)
appears next to a zero on the digital panel, rapidly squeeze the
inflation bulb to inflate the cuff. Stop pumping when the numbers
on the display are approximately 40 mmHg higher than your
normal systolic blood pressure. Do not inflate over 280 mmHg.
6. The cuff will deflate automatically. Remain still throughout
the entire reading.
7. When measurement is complete, the monitor alternately displays
your blood pressure/ pulse rate on the digital panel. Press the Air
Release Button to remove air in the cuff.
8. Wait 2-3 minutes before taking another blood pressure measurement.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION / REPLACEMENT
1. Slide the battery cover off in the direction
of the arrow.
2. Install 4 “AA” size batteries so + (positive)
and – (negative) polarities match the polarities
of the battery compartment as indicated.
3. Replace the battery cover.
NOTE: If the Low Battery Indicator appears on the
display, replace all four batteries.
Long-life alkaline batteries are recommended.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage follow the directions listed below:
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff. Never immerse the
monitor or any components in water.
Store the monitor in a safe and dry location. Do not fold the cuff
and tubing tightly. Do not subject the monitor to extreme hot or cold
temperatures, humidity and direct sunlight.
Avoid subjecting the monitor to strong shocks, such as dropping the
unit on the floor.
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
Use the unit consistent with the instruction provided in this manual.
Use only authorized parts and accessories.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO APPLY THE ARM CUFF
Pile Material
1. If the cuff is assembled correctly, the sewn
hook material will be on the outside
of the cuff loop and the metal D-ring
will not touch your skin.
Sewn Hook
Material
2. Pass the end of the cuff furthest from
the tubing through the metal D-ring to
form a loop. The smooth cloth should
be on the inside of the cuff loop.
D-Ring
Smooth Cloth
3. Put your left arm through the cuff loop.
The bottom of the cuff should be
approximately 1/2 inch above the
elbow. The cuff tab on the cuff
should lie over the brachial
1/2 inch (12.7 mm)
artery on the inside of the arm.
Tube should run down center
of arm even with middle finger.
Cuff tab
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO APPLY THE ARM CUFF
4. Pull the cuff so that the top and bottom edges are
tightened evenly around your arm.
5. When the cuff is positioned correctly, press the
sewn hook material FIRMLY against the pile
side of the cuff.
6. Make certain the cuff fits snugly around your arm.
The cuff should make good contact with your skin.
7. Sit in a chair with your feet flat on the floor and
place your arm on a table so that the cuff is at the
same level as your heart.
8. Relax your arm and turn your palm upward.
9. Be sure there are no kinks in the air tubing.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TAKE A MEASUREMENT
Please read “How To Apply The Arm Cuff” before
taking a reading.
1. Press the ON/OFF Button.
a) All display symbols appear for about one second.
This is the initial LCD Test.
Initial
LCD Test
b) The display symbols disappear and the Deflation
Indication Symbol ( ) starts to flash.
Deflation
Indication
c) When the monitor completes the necessary
preparations before measurement, the Heart Symbol
(
) appears next to a zero. Wait for the Heart
Ready
To Measure
Symbol ( ) before taking a measurement.
2. Begin inflating the cuff by rapidly squeezing the inflation
bulb until you have reached approximately 40 mmHg higher
than your normal systolic reading. If your normal systolic
blood pressure is unknown, inflate the cuff to 180 mmHg.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TAKE A MEASUREMENT
3. Remain still. The cuff will begin to deflate automatically.
4. As the cuff deflates, decreasing numbers
appear on the display. The Heart Symbol
(
) flashes at every heartbeat.
Indicated
Value Drops
Measuring
5. When measurement is complete, the Heart
Symbol ( ) stops flashing and your blood
pressure and pulse rate are displayed alternately.
6. When the Deflation Indication Symbol
(
) appears on the display, push the
Blood Pressure
Reading Display
(for approx.
3.5 sec.)
Air Release Button to release any
air left in the cuff.
Pulse Reading
Display
(for approx. 2 sec.)
NOTE: Wait 2-3 minutes before taking
another blood pressure measurement.
Waiting between readings allows the
arteries to return to the condition prior
to taking the blood pressure measurement.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MEMORY FUNCTION
This monitor has a memory capable of storing fourteen (14) sets
of readings. Every time you complete the measurement, the monitor
automatically stores blood pressure and pulse rate.
• Press the ON/Off Button.
• Press the MEMORY Button to recall stored readings while the
Heart Symbol ( ) is displayed.
• When fourteen (14) sets of readings are stored in memory, the oldest
set will be deleted to store a new set.
• To delete stored readings, press the MEMORY Button and the ON/OFF
Button simultaneously for 2 seconds. All readings will be deleted.
NOTE: You can not delete the stored readings partially.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR INDICATORS
Error Symbol
Correction
Cause
Cuff under-inflated.
Wait 2-3 minutes and take
another measurement.
Repeat steps listed under
“How To Take A Reading”.
Inflate the cuff 40 mmHg
higher than the previous
inflation value.
Movement during
Measurement
No pulse or blood pressure
reading due to very weak
artery pulse.
Press Air Release Button
for 4-5 seconds to release
air pressure in cuff.
Residual air pressure
in cuff.
Cuff over-inflated (more
than 300 mmHg).
Carefully read and repeat
steps listed under “How
To Take A Reading.”
Batteries have run down. Replace all four
“AA” batteries.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
Note:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. The product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If the product does cause harmful interference to radio or television
reception, which can be determined by turning the product on and off, the
user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE
(for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “ Digital Apparatus”, ICES-003 of the Canadian
Department of Communications. Cet appareil numérique respecte les limites
de bruits radioeléctriques applicables aux appareils numériques de Clase B
prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques”,
ICES-003 édictée par le minister des communications.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
Limited Warranties
Your HEM-432C Manual Blood Pressure Monitor, excluding the monitor cuff, is warranted
to be free from defects in materials and workmanship appearing within 1 year, when
used in accordance with the instructions provided with the monitor. The monitor cuff
is warranted to be free from defects in materials and workmanship appearing within one
year, when the monitor is used in accordance with the instructions provided with the monitor.
The above warranties extend only to the original retail purchaser.
We will, at our option, repair or replace without charge any monitor or monitor cuff covered
by the above warranties. Repair or replacement is our only
responsibility and your only remedy under the above warranties.
To obtain warranty service, ship the monitor and all of the components, together with proof
of purchase and a note explaining the problem with $5.00 for return shipping and insurance to:
Omron Healthcare, Inc.
Attn: Repair Department
300 Lakeview Parkway
Vernon Hills, IL 60061
Be sure to include the model number, your name and your phone number on the enclosed
note and any other correspondence.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THE APPLICABLE WRITTEN
WARRANTY ABOVE. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES OR DAMAGES. Some states do
not allow the exclusion or limitation of incidental
or consequential damages, so the above exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state.
FOR CUSTOMER SERVICE
Visit our web site at:
Call toll free:
1-800-634-4350
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model:
HEM-432C
Display:
LCD Digital Display
Measurement Range:
Pressure: 0 to 280 mmHg
Pulse: 40-180/min.
Accuracy/Calibration:
Pressure: 3mmHg or 2% of reading
Pulse: 5% of reading
Manual by inflation bulb
Automatic pressure release valve
Push button valve
Inflation:
Deflation:
Rapid Air Release:
Pressure Detection:
Measurement Method:
Pulse Wave Detection:
Power Source:
Battery Life:
Capacitive pressure sensor
Oscillometric method
Capacitive pressure sensor
4 "AA" batteries
Approximately 1000 uses
Operating Temperature/
50°F to 104°F (10°C to 40°C)
30 to 85% RH maximum
Humidity:
Storage Temperature/
Humidity:
-4°F to 140°F (-20°C to 60°C)
10 to 95% RH maximum
Console Weight:
Outer Dimensions:
Cuff Dimensions:
Approximately 13 oz. (350g) with cuff,
exclude batteries
Approximately 4 1/8" (w) x 3 3/8" (h)
x 4 1/2" (d) (106mm x 84mm x 116mm)
Approximately 5 3/4" (w) x 18 7/8" (l)
(145mm x 480mm)
Arm Circumference Range:
Accessories:
UPC Code:
Approximately 9'' to 13'' (220mm - 320mm)
Arm cuff, Inflation bulb, Instruction manual
0 73796 04322 3
NOTE: These specifications, to improve performance, are subject to change without notice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Made in China
Manufactured by:
OMRON HEALTHCARE, INC.
300 Lakeview Parkway
Vernon Hills, Illinois 60061
Copyright © 2003 Omron Healthcare, Inc.
432CINST Rev A
Download from Www.Somanuals.com. All Manuals Search And Download.
|