NordicTrack Treadmill NTTL17900 User Manual

Patent Pending  
Model No. NTTL17900  
Serial No.  
USER'S MANUAL  
Find the serial number in the location  
shown below. Write the serial number  
in the space above for reference.  
Serial Number Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if there are  
missing parts, we will guarantee  
complete satisfaction through di-  
rect assistance from our factory.  
TO AVOID UNNECESSARY DE-  
LAYS, PLEASE CALL DIRECT TO  
OUR TOLL-FREE CUSTOMER  
HOT LINE. The trained techni-  
cians on our Customer Hot Line  
will provide immediate assis-  
tance, free of charge to you.  
CUSTOMER HOT LINE:  
1-888-825-2588  
Mon.–Fri., 6 a.m.–6 p.m. MST  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manual  
for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of burns, fire, electric shock, or injury to persons, read the  
following important precautions and information before operating the treadmill.  
1. It is the responsibility of the owner to ensure  
that all users of this treadmill are adequately  
informed of all warnings and precautions.  
pation of 450 joules. The surge suppressor  
must be electrically rated for 120 volts AC and  
15 amps. To purchase a surge suppressor, see  
your local NordicTrack dealer or call 1-888-  
825-2588 and order part number 146148.  
2. Use the treadmill only as described in this  
manual.  
12. Keep the power cord and the surge suppres-  
sor away from heated surfaces.  
3. Place the treadmill on a level surface, with at  
least eight feet of clearance behind it. Do not  
place the treadmill on any surface that blocks  
air openings. To protect the floor or carpet  
from damage, place a mat under the treadmill.  
13. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See  
BEFORE YOU BEGIN on page 5 if the tread-  
mill is not working properly.)  
4. Keep the treadmill indoors, away from mois-  
ture and dust. Do not put the treadmill in a  
garage or covered patio, or near water.  
14. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the  
handrails while using the treadmill.  
5. Do not operate the treadmill where aerosol  
products are used or where oxygen is being  
administered.  
15. The treadmill is capable of high speeds.  
Adjust the speed in small increments to avoid  
sudden jumps in speed.  
6. Keep children under the age of 12 and pets  
away from the treadmill at all times.  
7. The treadmill should not be used by persons  
weighing more than 300 pounds.  
16. The pulse sensor is not a medical device.  
Various factors, including the user's move-  
ment, may affect the accuracy of heart rate  
readings. The pulse sensor is intended only  
as an exercise aid in determining heart rate  
trends in general.  
8. Never allow more than one person on the  
treadmill at a time.  
9. Wear appropriate exercise clothing when  
using the treadmill. Do not wear loose cloth-  
ing that could become caught in the treadmill.  
Athletic support clothes are recommended for  
both men and women. Always wear athletic  
shoes. Never use the treadmill with bare feet,  
wearing only stockings, or in sandals.  
17. Using hand weights and not holding the  
handrails may compromise your ability to  
maintain your balance. Hand weights should  
be used only by experienced users.  
18. Never leave the treadmill unattended while it  
is running. Always remove the key, unplug  
the power cord and move the on/off switch to  
the off position when the treadmill is not in  
use. (See the drawing on page 5 for the loca-  
tion of the on/off switch.)  
10. When connecting the power cord (see page 8),  
plug the power cord into a surge suppressor  
(not included) and plug the surge suppressor  
into a grounded circuit capable of carrying 15  
or more amps. No other appliance should be on  
the same circuit. Do not use an extension cord.  
19. Do not attempt to raise, lower, or move the  
treadmill until it is properly assembled. (See  
ASSEMBLY on page 6, and HOW TO FOLD  
AND MOVE THE TREADMILL on page 25.) You  
must be able to safely lift 45 pounds (20 kg) in  
order to raise, lower, or move the treadmill.  
11. Use only a single-outlet surge suppressor that  
is UL 1449 listed as a transient voltage surge  
suppressor (TVSS). The surge suppressor  
must have a UL suppressed voltage rating of  
400 volts or less and a minimum surge dissi-  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. Do not change the incline of the treadmill by  
placing objects under the treadmill.  
from your CD player or VCR when you are not  
using them.  
21. When folding or moving the treadmill, make  
sure that the storage latch is fully closed.  
25. Inspect and tighten all parts of the treadmill  
regularly.  
22. When using iFIT.com CD’s and videos, an  
electronic “chirping” sound will alert you  
when the speed and/or incline of the treadmill  
is about to change. Always listen for the  
“chirp” and be prepared for speed and/or in-  
cline changes. In some instances, the speed  
and/or incline may change before the per-  
sonal trainer describes the change.  
26. Never insert or drop any object into any  
opening.  
27.  
DANGER:  
Always unplug the power  
cord immediately after use, before cleaning  
the treadmill, and before performing the main-  
tenance and adjustment procedures de-  
scribed in this manual. Never remove the  
motor hood unless instructed to do so by an  
authorized service representative. Servicing  
other than the procedures in this manual  
should be performed by an authorized service  
representative only.  
23. When using iFIT.com CD’s and videos, you  
can manually override the speed and incline  
settings at any time by pressing the speed  
and incline buttons. However, when the next  
“chirp” is heard, the speed and/or incline will  
change to the next settings of the CD or video 28. This treadmill is intended for in-home use  
program.  
only. Do not use this treadmill in any commer-  
cial, rental, or institutional setting.  
24. Always remove iFIT.com CD’s and videos  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
SAVE THESE INSTRUCTIONS  
The decals shown below have been placed on your treadmill. If the decal is missing or illegible, please  
call our Customer Service Department, toll-free, to order a free replacement decal (see ORDERING RE-  
PLACEMENT PARTS on page 31). Apply the decal in the location shown.  
Note: This decal is shown at 38% of actual size.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Thank you for selecting the revolutionary NordicTrack®  
SUMMIT 5500 treadmill. The SUMMIT 5500 treadmill  
combines advanced technology with innovative design  
to help you get the most from your exercise program in  
the convenience of your home. And when you’re not  
exercising, the unique SUMMIT 5500 can be folded up,  
requiring less than half the floor space of other tread-  
mills.  
please call our Customer Service Department toll-free  
at 1-888-825-2588, Monday through Friday, 6 a.m.  
until 6 p.m. Mountain Time (excluding holidays). To  
help us assist you, please note the product model  
number and serial number before calling. The model  
number of the treadmill is NTTL17900. The serial num-  
ber can be found on a decal attached to the treadmill  
(see the front cover of this manual for the location).  
For your benefit, read this manual carefully before  
using the treadmill. If you have additional questions,  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
Book Holder  
Water Bottle Holder*  
Hand Weights  
Console  
Handrail  
Pulse Sensor  
Key/Clip  
LEFT SIDE  
Lock Knob  
RIGHT SIDE  
On/Off Switch  
Circuit Breaker  
Walking Belt  
Power Cord  
Foot Rail  
Cushioned Walking Platform  
*No water bottle is included.  
Rear Roller  
Adjustment Bolts  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not  
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench  
and your own phillips screwdriver  
and wire cutters  
.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a  
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal  
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off  
the lubricant with a soft cloth and a mild, non-abrasive cleaner.  
1. With the help of a second person, carefully raise the  
1
Uprights (69) until the treadmill is in the position shown.  
Insert one of the Extension Legs (102) into the treadmill  
as shown in the inset drawing. Make sure that the  
Extension Leg is turned so the Base Pad (99) is on the  
bottom. Note: It may be helpful to tip the Uprights (69)  
forward as you insert the Extension Leg.  
69  
69  
Insert the other Extension Leg (not shown) in the same  
way.  
102  
99  
2. Press the Lock Knob Sleeve (70) into the left Upright (69).  
2
Make sure that the Lock Pin Collar (72) and the Spring  
(71) are on the Lock Pin (74). Insert the Lock Pin into the  
Lock Knob Sleeve (70) and the left Upright (69). Press the  
Lock Knob Spacer (117) onto left Upright. Tighten the  
Lock Knob (68) onto the Lock Pin.  
69  
68  
70  
71  
117  
72  
74  
3. With the help of a second person, tip the Uprights (69)  
down as shown. Make sure that the Extension Legs  
(102) remain in the Uprights.  
3
Attach each Extension Leg (102) with two Screws (100)  
as shown.  
99  
Frame  
With the help of a second person, carefully tip the  
Uprights (69) back to the vertical position.  
69  
69  
Note: A replacement Base Pad (99) may be included. Use  
the Base Pad to replace any Base Pad that becomes  
worn.  
100  
102  
100  
102  
99  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Slide the Grounding Bracket (122) onto one of the  
Handrail Spacers (65) in the location shown.  
A
4
122  
65  
Tabs  
See inset drawing A. Pinch each of the tabs on the  
Grounding Bracket (122) to allow the tabs to fit inside the  
hole in the Upright (69) (See inset drawing B).  
122  
See inset drawing B. Place the Handrail Spacer (65) on  
the left Upright (69) as shown, with the cutout on the indi-  
cated side. Note: Make sure that the tabs on the Bracket  
are inserted into the hole in the Upright  
B
Cutout  
69  
65  
5. Pull the Upright Wire Harness (98) up through the other  
Handrail Spacer (65). Place the Handrail Spacer (65) on  
the right Upright (69) as shown, with the cutout on the in-  
dicated side (see inset drawing A).  
A
5
81  
Cutout  
66  
Have a second person hold the Handrails (66) near the  
Uprights (69) as shown. Connect the Upright Wire  
Harness (98) to the wires extending from the Console  
Base (81). Insert the connectors and the Upright Wire  
Harness into the hole in the Console Base (see inset  
drawing B).  
69  
65  
98  
B
69  
98  
Being careful not to pinch the Upright Wire Harness (98),  
set the Handrails (66) on the Spacers (65).  
65  
81  
6. Insert two Handrail Bolts (78) with Handrail Washers (77)  
and Handrail Bushings (75) into the right Upright (69) and  
the right Handrail Spacer (65). Turn the Handrail  
Bushings so they fit against the Upright with the thick  
sides of the Bushings toward the center of the treadmill  
as shown in the inset drawing. Lift the right Handrail (66)  
to align the Bolts with the holes in the Handrail. Next,  
thread the Bolts into the Handrail (66). Do not tighten  
the Bolts yet.  
6
66  
65  
69  
75  
Thick  
Side  
77  
Attach the left Handrail (not shown) in the same way.  
Tighten all four Handrail Bolts (78).  
75  
77  
78  
7. Make sure that all parts are tightened before you use the treadmill. Note: If there is a thin sheet of clear  
plastic on the face of the hood decal and the “ComforTrack” decal, remove it. Keep the included allen wrench in  
a secure place. The allen wrench is used to adjust the walking belt (see page 27). To protect the floor or car-  
pet from damage, place a mat under the treadmill.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND ADJUSTMENT  
THE PERFORMANT LUBETM WALKING BELT  
This product is for use on a nominal 120-volt circuit,  
and has a grounding plug that looks like the plug illus-  
trated in drawing 1 below. A temporary adapter that  
looks like the adapter illustrated in drawing 2 may be  
used to connect the surge suppressor to a 2-pole  
receptacle as shown in drawing 2 if a properly  
grounded outlet is not available.  
Your treadmill features a walking belt coated with  
PERFORMANT LUBETM, a high-performance lubricant.  
IMPORTANT: Never apply silicone spray or other  
substances to the walking belt or the walking plat-  
form. Such substances will deteriorate the walking  
belt and cause excessive wear.  
1
HOW TO PLUG IN THE POWER CORD  
Grounded Outlet Box  
Surge Suppressor  
Grounding Pin  
DANGER:  
Improper connection  
of the equipment-grounding conductor can  
result in an increased risk of electric shock.  
Check with a qualified electrician or service-  
man if you are in doubt as to whether the  
product is properly grounded. Do not modify  
the plug provided with the product—if it will  
not fit the outlet, have a proper outlet  
Grounding Pin  
Grounded Outlet  
Grounding Plug  
installed by a qualified electrician.  
2
Grounded Outlet Box  
Adapter  
Your treadmill, like any other type of sophisticated  
electronic equipment, can be seriously damaged by  
sudden voltage changes in your home’s power.  
Voltage surges, spikes, and noise interference can  
result from weather conditions or from other appliances  
being turned on or off. To decrease the possibility of  
your treadmill being damaged, always use a surge  
suppressor with your treadmill (see drawing 1 at  
the right).  
Surge Suppressor  
Lug  
Metal Screw  
To purchase a surge suppressor, see your local  
NordicTrack dealer or call 1-888-825-2588 and order  
part number 146148. Use only a single-outlet surge  
suppressor that is UL 1449 listed as a transient voltage  
surge suppressor (TVSS). The surge suppressor must  
have a UL suppressed voltage rating of 400 volts or  
less and a minimum surge dissipation of 450 joules.  
The surge suppressor must be electrically rated for  
120 volts AC and 15 amps.  
The temporary adapter should be used only until a  
properly grounded outlet (drawing 1) can be installed  
by a qualified electrician.  
The green-colored rigid ear, lug, or the like extending  
from the adapter must be connected to a permanent  
ground such as a properly grounded outlet box cover.  
Whenever the adapter is used it must be held in place  
by a metal screw. Some 2-pole receptacle outlet box  
covers are not grounded. Contact a qualified elec-  
trician to determine if the outlet box cover is  
grounded before using an adapter.  
This product must be grounded. If it should malfunc-  
tion or break down, grounding provides a path of least  
resistance for electric current to reduce the risk of elec-  
tric shock. This product is equipped with a cord having  
an equipment-grounding conductor and a grounding  
plug. Plug the power cord into a surge suppressor,  
and plug the surge suppressor into an appropriate  
outlet that is properly installed and grounded in  
accordance with all local codes and ordinances.  
Important: The treadmill is not compatible with  
GFCI-equipped outlets.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program  
Display  
Main  
Display  
Pulse  
Sensor  
Pulse  
Sensor  
Note: If there is a thin sheet  
of clear plastic on the face  
of the console, remove it.  
Clip  
Key  
FEATURES OF THE CONSOLE  
sonal trainer right in your home. Using the included  
audio cable, you can connect the treadmill to your home  
stereo, portable stereo, or computer and play special  
iFIT.com CD programs (CD’s are available separately).  
iFIT.com CD programs automatically control the speed  
and incline of the treadmill as a personal trainer guides  
you through every step of your workout. High-energy  
music provides added motivation. Each CD features  
two programs designed by certified personal trainers.  
The advanced console offers an impressive array of  
features to help you get the most from your exercise.  
When the manual mode of the console is selected, the  
speed and incline of the treadmill can be changed with  
a touch of a button. As you exercise, the console will  
provide continuous exercise feedback. You can even  
measure your heart rate using the built-in pulse sensor.  
For a total-body workout, the included hand weights  
can be used as you walk on the treadmill.  
In addition, you can connect the treadmill to your VCR  
and TV and play iFIT.com video programs (videocas-  
settes are available separately). Video programs offer  
Twenty-seven preset workout programs are also offered. the same benefits as iFIT.com CD programs, but add  
Each program automatically controls the speed and  
incline of the treadmill to give you an effective workout.  
You can even create custom workout programs and  
store them in memory for future use.  
the excitement of working out with a class and an  
instructor—the hottest new trend at health clubs.  
With the treadmill connected to your computer, you  
access basic programs, audio programs, and video  
programs directly from the internet. And by adding an  
optional upgrade module to the treadmill, you can use  
virtually endless features from our Web site. See  
In addition, the console offers a fitness test program  
that measures your relative fitness level and a pulse-  
driven program that automatically adjusts the speed  
and incline of the treadmill to keep your heart rate near  
a target level during your workout. Note: The fitness  
test program and the pulse-driven program require the  
use of an optional chest pulse sensor (see page 24).  
To purchase iFIT.com CD’s or videocassettes or an  
optional upgrade module, call toll-free 1-800-735-  
0768. For information about the optional chest  
pulse sensor, see page 24.  
The console also features new iFIT.com interactive  
technology. iFIT.com technology is like having a per-  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plug in the power cord.  
2
3
CAUTION:  
Before operating the  
console, read the following precautions.  
See HOW TO PLUG IN THE POWER CORD on  
page 8.  
• Do not stand on the walking belt when turn-  
ing on the power.  
Move the on/off switch to the on position.  
• Always wear the clip (see the drawing below)  
while operating the treadmill.  
Locate the on/off switch  
on the treadmill near the  
On  
power cord. Move the  
Position  
• Adjust the speed in small increments in  
order to avoid sudden jumps in speed.  
on/off switch to the on  
position.  
• The pulse sensor is not a medical device.  
Various factors may affect the accuracy of  
heart rate readings. The pulse sensor is in-  
tended only as an exercise aid in determin-  
ing heart rate trends in general.  
Insert the key fully into the console.  
4
5
Stand on the foot rails of the treadmill. Attach the  
clip securely to the waistband of your clothes.  
Next, insert the key into the console. After a  
moment, various displays and indicators on the  
console will light. Note: When the key is inserted,  
the treadmill incline system may automatically  
calibrate itself; the treadmill will rise to the highest  
incline level and then return to the lowest incline  
level. During calibration, the left side of the main  
display will show two dashes (– –) and the time  
indicator below the display will flash.  
• If you have heart problems, or if you are over  
60 years of age and have been inactive, do  
not use the pulse-driven program. If you are  
taking medication regularly, consult your  
physician to find whether the medication will  
affect your exercise hart rate.  
• Using hand weights and not holding the  
handrails may compromise your ability to  
maintain your balance. Hand weights should  
be used only by experienced users.  
Enter your weight.  
Although you can use the console without entering  
your weight, the console will count the calories that  
you burn more accurately if you enter your weight.  
To enter your weight, press either of the Enter  
Weight buttons. The words “ENTER WEIGHT”  
• To reduce the possibility of electric shock,  
keep the console dry. Avoid spilling liquids  
on the console and place only a sealed water  
bottle in the water bottle holder.  
GETTING STARTED  
Attach the clip to the waistband of your clothes.  
1
and the current weight setting will appear in the  
main display. Press the Enter Weight buttons  
again to enter your weight. The buttons can be  
held down to enter your weight quickly. Four sec-  
onds after the buttons are last pressed, the weight  
setting will disappear from the display. Your weight  
will then be saved in memory.  
Stand on the foot rails  
of the treadmill. Find  
the clip attached to the  
key and slide the clip  
onto the waistband of  
your clothes. Next, in-  
Clip  
sert the key into the  
console. Test the clip by carefully taking a few  
steps backward until the key is pulled from the  
console. If the key is not pulled from the con-  
sole, adjust the position of the clip as needed.  
Then, remove the key from the console.  
To use the manual mode of the console, follow the  
steps beginning on page 11. To use a preset program,  
see page 12. To create and use a custom program,  
see pages 14 and 15. To use the fitness test program,  
see page 16. To use the pulse-driven program, see  
page 17. To use an iFIT.com CD or video program,  
refer to page 21. To use an iFIT.com program di-  
rectly from our internet site, see page 23.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Follow your progress with the LED track, the  
Training Zone display, and the main display.  
HOW TO USE THE MANUAL MODE  
5
The LED track—When  
the manual mode or an  
iFIT.com program is se-  
Insert the key fully into the console.  
1
See GETTING STARTED on page 10.  
lected, the program dis-  
play will show an LED  
track representing 1/4  
mile. As you exercise, the indicators around the  
track will light in sequence until you have completed  
1/4 mile. A new lap will then begin.  
Select the manual mode.  
2
When the key is inserted, the manual mode will  
automatically be selected. If a program has been  
selected, press the Select Workout Goal button  
repeatedly until the words “MANUAL MODE”  
appear in the main display.  
The Training Zone dis-  
play—As you exercise,  
the Training Zone  
display will show the  
approximate intensity  
level of your exercise.  
For example, if four to six indicators in the display  
are lit, your intensity level is ideal for fat burning.  
Press the Start button or the Speed + button to  
start the walking belt.  
3
The main display—The main display will show  
the following information:  
A moment after the button is pressed, the walking  
belt will begin to move at 1 mph. Hold the handrails  
and begin walking.  
Incline—The left side of  
the main display will  
show the incline level of  
the treadmill.  
As you exercise,  
change the speed of  
the walking belt as de-  
sired by pressing the  
Speed + and – buttons.  
Each time a button is  
Distance/Laps—This  
section of the main dis-  
play will show the dis-  
pressed, the speed setting will change by 0.1  
mph; if a button is held down, the speed setting  
will change in increments of 0.5 mph. To change  
the speed setting quickly, press the 1-step Speed  
buttons. The speed range is 0.5 mph to 10 mph.  
tance that you have  
walked and the number  
of 1/4-mile laps you have  
completed. The display will change from one num-  
ber to the other every seven seconds.  
To stop the walking belt, press the Stop button.  
The time will begin to flash in the main display. To  
restart the walking belt, press the Start button or  
the Speed + button.  
Calories/Heart Rate—  
When you are not using  
the handgrip pulse sen-  
sor, the center of the  
main display will show  
Change the incline of the treadmill as desired.  
the approximate number  
4
of calories you have burned. When you are using  
the handgrip pulse sensor, the display will show  
your heart rate (see step 6).  
To change the incline of  
the treadmill, press the  
Incline buttons. Each  
time a button is  
Time/Pace—When the  
pressed, the incline will  
manual mode or the  
change by 0.5%. The  
iFIT.com mode is se-  
incline range is 0% to 10%. To change the incline  
quickly, press the 1-step Incline buttons. Note:  
After the buttons are pressed, it may take a moment  
for the treadmill to reach the selected incline setting.  
lected, this section of the  
main display will show  
the elapsed time and  
your current pace (pace is measured in minutes  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
per mile). The display will change from one num-  
ber to the other as shown by the indicators above  
and below the display. When a program is se-  
lected, the display will show the time remaining in  
the program, your current pace, and the time re-  
maining in the current segment of the program.  
The display will change from one number to the  
next every seven seconds. Note: During the fitness  
test program, the display will show the elapsed  
time, your current pace, and the time remaining in  
the current segment of the program.  
When you are finished exercising, stop the  
walking belt and remove the key.  
7
Step onto the foot rails, press the Stop button, and  
adjust the incline of the treadmill to the lowest level.  
The incline must be at the lowest level when  
the treadmill is raised to the storage position or  
the treadmill will be damaged. Next, remove the  
key from the console and put it in a secure place.  
Note: If the displays and indicators on the con-  
sole remain lit after the key is removed, the  
console is in the “demo” mode. Refer to page  
24 and turn off the demo mode.  
Speed—The right side  
of the main display will  
show the speed of the  
walking belt.  
When you are finished using the treadmill, move  
the on/off switch near the power cord to the off  
position and unplug the power cord.  
Note: The console can  
display speed and dis-  
HOW TO USE PRESET PROGRAMS  
tance in either miles or  
kilometers. To find  
which unit of measure-  
ment is selected, hold  
Insert the key fully into the console.  
1
See GETTING STARTED on page 10.  
down the Stop button while inserting the key into  
the console. An “E” for English miles or an “M” for  
metric kilometers will appear on the right side of  
the main display. Press the Speed + button to  
change the unit of measurement. When the de-  
sired unit of measurement is selected, remove the  
key and then reinsert it. Note: For simplicity, all in-  
structions in this manual refer to miles.  
Select the desired preset program.  
2
The console offers twenty-seven preset programs—  
nine programs that focus on weight loss, nine  
programs designed for aerobic exercise, and nine  
programs for high-performance conditioning.  
When the key is inserted, the manual mode will  
automatically be selected. To select one of the  
preset programs, first press the Select Workout  
Goal button repeatedly until the words “WEIGHT  
LOSS,” “AEROBIC,” or “PERFORMANCE” appear  
in the main display.  
To reset the main display, press the Stop button,  
remove the key, and then reinsert the key.  
Measure your heart rate, if desired.  
6
To measure your  
heart rate, stand  
on the foot rails  
and place your  
hands on the  
metal contacts on  
the handrail. Your  
palms must be  
resting on the  
upper contacts,  
and your fingers  
must be touching  
the lower con-  
tacts—avoid moving your hands. When your  
pulse is detected, the Heart Rate indicator will  
flash and then your heart rate will be shown. For  
the most accurate heart rate reading, continue  
to hold the contacts for about 15 seconds.  
Next, press the Select Course button repeatedly  
to select one of the weight loss, aerobic, or perfor-  
mance programs. For example, if the words  
“WEIGHT LOSS” appear in the main display, you  
can select the Riverside Trail, Mountain Trail,  
Nature Path, Power Hike, Waterfall Canyon,  
Moose Tracks, Boulder Trek, Evergreen Path, or  
Meadow Trail program.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you select a preset program, the left side of  
the main display will flash the maximum incline  
setting of the program and the right side of the  
display will flash the maximum speed setting of  
the program for ten seconds. Three seconds after  
a preset program is selected, the name of the se-  
lected program and the total program time will  
begin to scroll across the main display.  
Note: Each time a segment ends and the speed  
settings move to the left, if all of the indicators in  
the Current Segment column are lit, the speed set-  
tings may move downward so that only the highest  
indicators in the columns will appear in the pro-  
gram display. When the speed settings move to  
the left again and not all of the indicators in the  
Current Segment column are lit, the speed settings  
will move back up.  
The program dis-  
play will show the  
first thirteen speed  
settings for the  
program you have  
selected.  
If the speed or incline setting for the current  
segment is too high or too low, you can manually  
override the setting by pressing the Speed or  
Incline buttons on the console. Every few times  
one of the Speed buttons is pressed, an additional  
indicator will light or darken in the Current Segment  
column. If any of the columns to the right of the  
Current Segment column have the same number  
of lit indicators as the Current Segment column,  
an additional indicator may light or darken in those  
columns as well. Note: If you manually adjust the  
speed setting so that all of the indicators in the  
Current Segment column are lit, the speed settings  
in the program display will not move downward as  
described above. Note: If you manually override  
the speed or incline setting for the current seg-  
ment, when the segment ends the treadmill will  
automatically adjust to the speed and incline  
settings for the next segment.  
Press the Start Program button or the Speed +  
button to start the program.  
3
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings for the program. Hold the handrails  
and begin walking.  
Each program is divided into several time seg-  
ments of different lengths. The main display shows  
both the time remaining in the program and the  
time remaining in the current segment of the pro-  
gram. One speed setting and one incline setting  
are programmed for each segment. The speed  
setting for the first  
segment is shown  
in the flashing  
Current Segment  
column of the pro-  
To stop the program temporarily, press the Stop  
button. The time will begin to flash in the main dis-  
play. To restart the program, press the Start  
Program button or the Speed + button. To end the  
program, press the Stop button, remove the key,  
and then reinsert the key.  
Current Segment  
gram display.  
(The incline set-  
tings are not  
shown in the program display.) The speed set-  
tings for the next thirteen segments will be shown  
in the thirteen columns to the right.  
Follow your progress with the displays.  
See step 5 on page 11.  
4
5
6
Measure your heart rate if desired.  
See step 6 on page 12.  
When only three seconds remain in the first seg-  
ment of the program, both the Current Segment  
column and the column to the right will flash, a se-  
ries of tones will sound, and all speed settings will  
move one column to the left. The speed setting for  
the second segment will then be shown in the  
flashing Current Segment column and the tread-  
mill will automatically adjust to the speed and in-  
cline settings for the second segment.  
When the program has ended, remove the key.  
Step onto the foot rails and make sure that the in-  
cline of the treadmill is at the lowest level. Next,  
remove the key from the console and put it in a se-  
cure place. Note: If the displays and indicators  
on the console remain lit after the key is re-  
moved, the console is in the “demo” mode.  
Refer to page 24 and turn off the demo mode.  
The program will continue in this way until the  
speed setting for the last segment is shown in the  
Current Segment column and no time remains in  
the program. The walking belt will then slow to a  
stop.  
When you are finished using the treadmill, move  
the on/off switch near the power cord to the off  
position and unplug the power cord.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer to the program display. Each custom pro-  
gram is divided into one-minute segments. One  
speed setting and one incline setting can be pro-  
grammed for each segment. The speed setting for  
the first segment  
HOW TO CREATE CUSTOM PROGRAMS  
Insert the key fully into the console.  
1
will be shown in the  
See GETTING STARTED on page 10.  
Current Segment  
flashing Current  
Segment column of  
the program dis-  
play. (The incline  
settings are not  
Select one of the custom programs.  
2
When the key is inserted, the manual mode will  
automatically be selected. To select one of the  
custom programs, first press the Select Workout  
Goal button repeatedly until the letters “CUSTOM  
PROG” appear in the main display.  
shown in the pro-  
gram display.) To program the desired speed and  
incline settings for the first segment, simply adjust  
the speed and incline of the treadmill to the de-  
sired levels with the Speed and Incline buttons.  
Every few times one of the Speed buttons is  
pressed, an additional indicator will light or darken  
in the Current Segment column.  
When the first segment of the program is com-  
pleted, the current speed setting and the current  
incline setting will be stored in memory. All  
columns in the program display will then move  
one column to the left and the speed setting for  
the second segment will be shown in the flashing  
Current Segment column. Program speed and  
incline settings for the second segment as de-  
scribed above.  
Next, press the Select Course button repeatedly to  
select the Learn 1 or Learn 2 program.  
Repeat this procedure until you have programmed  
speed and incline settings for as many segments  
as desired—custom programs can have from one  
to forty segments.  
When you select a custom program, the left side  
of the main display will flash the maximum incline  
setting of the program and the right side of the  
display will flash the maximum speed setting of  
the program for ten seconds. Three seconds after  
a custom program is selected, the name of the se-  
lected program and the total program time will  
begin to scroll across the main display.  
To stop the program temporarily, press the Stop  
button. All displays will pause and the time will  
begin to flash in the main display. To restart the  
program, press the Start Program button or the  
Speed + button.  
Press the Start Program button or the Speed +  
3
button to start the walking belt.  
Press the Stop button, remove the key, and  
then reinsert the key.  
5
6
A moment after the button is pressed, the walking  
belt will begin to move. Hold the handrails and  
begin walking.  
When you have programmed speed and incline  
settings for as many segments as desired, press  
the Stop button, remove the key, and then reinsert  
the key. The speed and incline settings that you  
programmed and the number of completed  
segments will be stored in memory. To use the  
custom program, see HOW TO USE CUSTOM  
PROGRAMS on page 15.  
Press the Record button and program the  
desired speed and incline settings.  
4
When the Record button is pressed, the indicator  
beside the button will light. Speed and incline set-  
tings can be programmed only when the indica-  
tor is lit. Note: When the indicator beside the  
Record button is lit, the main display will show the  
elapsed time instead of the time remaining in the  
program.  
Remove the key.  
See step 6 on page 13.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When only three seconds remain in the first seg-  
ment of the program, both the Current Segment  
column and the column to the right will flash, a se-  
ries of tones will sound, and all speed settings will  
move one column to the left. The speed setting for  
the second segment will then be shown in the  
flashing Current Segment column and the treadmill  
will automatically adjust to the second speed and  
incline settings that you programmed previously.  
HOW TO USE CUSTOM PROGRAMS  
Insert the key fully into the console.  
1
See GETTING STARTED on page 10.  
Select one of the custom programs.  
2
When the key is inserted, the manual mode will  
automatically be selected. To select one of the  
custom programs, first press the Select Workout  
Goal button repeatedly until the letters “CUSTOM  
PROG” appear in the main display.  
The program will continue until the speed setting  
for the last segment is shown in the Current  
Segment column and no time remains in the pro-  
gram. The walking belt will then slow to a stop.  
Note: If the program is too easy or too difficult, the  
speed or incline setting for the current segment can  
be adjusted with the Speed or Incline buttons.  
Adjustments will not be stored in memory. To repro-  
gram the speed or incline setting for the current seg-  
ment, press the Record button. The indicator beside  
the button will light. Speed and incline settings can  
be programmed only when the indicator is lit.  
(Note: When the indicator on the Record button is  
lit, the main display will show the elapsed time in-  
stead of the time remaining in the program.) Adjust  
the speed or incline setting for the current segment  
with the Speed or Incline buttons. After the segment  
is completed, press the Record button again. The  
new setting will be stored in memory.  
Next, press the Select Course button repeatedly to  
select the Learn 1 or Learn 2 program.  
When you select a custom program, the left side  
of the main display will flash the maximum incline  
setting of the program and the right side of the  
display will flash the maximum speed setting of  
the program for ten seconds. Three seconds after  
a custom program is selected, the name of the se-  
lected program and the total program time will  
begin to scroll across the main display.  
The program display will show the first speed set-  
tings for the program you have selected (refer to  
the drawing below).  
To stop the program temporarily, press the Stop  
button. All displays will pause and the time will  
begin to flash in the main display. To restart the  
program, press the Start Program button or the  
Speed + button. To end the program, press the  
Stop button, remove the key, and then reinsert the  
key.  
Press the Start Program button or the Speed +  
button to start the program.  
3
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings that you programmed previously.  
Hold the handrails and begin walking.  
Follow your progress with the displays.  
See step 5 on page 11.  
Each program is divided into several one-minute  
segments. The main display shows both the time  
remaining in the program and the time remaining  
in the current segment of the program. One speed  
setting and one incline setting are programmed for  
each segment.  
4
5
6
Measure your heart rate, if desired.  
See step 6 on page 12.  
The speed setting  
for the first seg-  
Current Segment  
ment will be  
shown in the  
flashing Current  
When the program has ended, remove the key.  
See step 6 on page 13.  
Segment column  
of the program  
display. (The incline settings are not shown in the  
program display.) The speed settings for the next  
several segments will be shown in the columns to  
the right.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you have already entered your age, go to step 5.  
If you have not entered your age, press the Enter  
Age buttons to enter your age. The buttons can be  
held down to enter your age quickly. Your age will  
then be saved in memory.  
HOW TO USE THE FITNESS TEST PROGRAM  
The fitness test program is designed to measure your  
relative fitness level. For the best results, the fitness  
test program should be used at a time when your en-  
ergy level is high; the fitness test program should not  
be used if you have already exercised during the day.  
Note: You must wear the optional chest pulse sen-  
sor to use the fitness test program (see page 24).  
Follow the steps below to use the fitness test program.  
Press the Start Program button or the Speed +  
button to start the program.  
5
When the button is  
pressed, the main dis-  
play will show an “L 1”  
Put on the chest pulse sensor.  
(level 1), indicating that  
the first four-minute level  
of the fitness test pro-  
gram has begun. The incline of the treadmill will  
automatically adjust to 3% and the walking belt  
will begin to move at 1.5 mph. Hold the handrails  
and begin walking.  
1
Refer to the instructions included with the chest  
pulse sensor to put on the chest pulse sensor.  
Insert the key fully into the console.  
2
See GETTING STARTED on page 10.  
The fitness test program is divided into seven,  
four-minute levels. Each level consists of four,  
one-minute segments. One speed setting and one  
incline setting are  
Select the fitness test program.  
3
When the key is inserted, the manual mode will  
automatically be selected. To select the fitness  
test program, first press the Select Workout Goal  
button repeatedly until the words “HEART RATE”  
appear in the main display.  
programmed for  
each segment. The  
Current Segment  
speed setting for  
the first segment  
will be shown in the  
flashing Current  
Segment column of  
the program display. (The incline settings are not  
shown in the program display.) The speed settings  
for the next thirteen segments will be shown in the  
thirteen columns to the right.  
Next, press the Select Course button repeatedly  
until the words “FITNESS TEST” appear.  
When only three seconds remain in the first one-  
minute segment of the program, both the Current  
Segment column and the column to the right will  
flash, a tone will sound, and all speed settings will  
move one column to the left. The speed setting for  
the second segment will then be shown in the  
flashing Current Segment column.  
When the fitness test program is selected, the  
program display will show the first thirteen speed  
settings for the program.  
When the first four-minute level of the program is  
completed, both the Current Segment column and  
the column to the right will flash, a series of tones  
will sound, and all speed settings will move one  
column to the left. The main display will then show  
an “L 2,” indicating that the second four-minute  
level has begun. The incline will then adjust to 4%  
and the speed will increase to 2.5 mph.  
Enter your age.  
4
Three seconds after the fitness test program is se-  
lected, the words “ENTER AGE” and the current  
age setting will appear in the main display. You  
must enter your age to use the fitness test program.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At the beginning of each four-minute level, the  
speed and/or incline of the treadmill will automati-  
cally increase. The fitness test program will con-  
tinue in this way until your heart rate reaches 70%  
of your estimated maximum heart rate, and the  
current four-minute level is completed. The fitness  
test program will then be completed, regardless of  
how many levels remain.  
HOW TO USE THE PULSE-DRIVEN PROGRAM  
The pulse-driven program automatically adjusts the  
speed and incline of the treadmill to keep your heart  
rate near a target level during your workout. Note: You  
must wear the optional chest pulse sensor to use  
the pulse-driven program (see page 24).  
When the fitness test  
program is completed,  
the letter “C” will appear  
in the main display and  
a two-minute cool-down  
period will begun. The  
CAUTION:  
If you have heart prob-  
lems, or if you are over 60 years of age and  
have been inactive, do not use the pulse-driven  
program. If you are taking medication regularly,  
consult your physician to find whether the  
medication will affect your exercise heart rate.  
incline will then adjust to 1% and the speed will de-  
crease.  
When the cool-down period is completed, the  
walking belt will slow to a stop. After the fitness  
test program is com-  
Follow the steps below to use the pulse-driven program.  
pleted, your fitness  
level will be shown in  
the main display. There  
are ten fitness levels—  
Put on the chest pulse sensor.  
1
Refer to the instructions included with the chest  
pulse sensor to put on the chest pulse sensor.  
fitness level 10 (FL:10)  
is the highest. Remem-  
ber, the fitness program is intended only to indi-  
cate your relative fitness level.  
Insert the key fully into the console.  
2
See GETTING STARTED on page 10.  
Note: The Speed and Incline buttons will not  
function while the fitness test program is selected. If  
your pulse is not detected during the program, the  
letters “PLS” will flash in the main display. If your  
pulse is not detected during the last thirty seconds  
of any four-minute level (after four minutes, after  
eight minutes, etc.), the fitness test program will  
end and the main display will show a fitness level  
of 0 (FL: 0).  
Select the pulse-driven program.  
3
When the key is inserted, the manual mode will  
automatically be selected. To select the pulse-  
driven program, first press the Select Workout  
Goal button repeatedly until the words “HEART  
RATE” appear in the main display.  
The fitness test program cannot be stopped tem-  
porarily and then restarted. However, the program  
can be stopped at any time by pressing the Stop  
button. The main display will then show an esti-  
mated fitness level.  
Next, press the Select Course button until the words  
“PULSE DRIVEN” appear.  
When the program has ended, remove the key.  
6
See step 6 on page 13.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
get heart rate setting for the second segment will  
then be shown in the flashing Current Segment  
column. As you exercise, the speed and/or incline  
of the treadmill will automatically change as  
needed to keep your heart rate near the current  
target heart rate setting.  
Enter your age.  
4
Three seconds after the pulse-driven program is  
selected, the words “ENTER AGE” and the current  
age setting will appear in the main display. You  
must enter your age to use the pulse-driven program.  
The program will continue until the target heart  
rate setting for the last segment is shown in the  
Current Segment column and no time remains in  
the program. The walking belt will then slow to a  
stop.  
If you have already entered your age, go to step 5.  
If you have not entered your age, press the Enter  
Age buttons to enter your age. The buttons can be  
held down to enter your age quickly. Your age will  
then be saved in memory.  
If the speed or incline setting for the current seg-  
ment is too high or too low, you can adjust the set-  
ting with the Speed or Incline buttons. However, if  
you decrease the speed, the incline will automati-  
cally increase; if you increase the speed, the in-  
cline will decrease. If you increase the incline, the  
speed will decrease; if you decrease the incline,  
the speed will increase. The treadmill will always  
attempt to keep your heart rate near the target  
heart rate setting for the current segment. Note:  
When the incline reaches the lowest setting, the  
speed cannot be increased any further. When the  
incline reaches the highest setting, the speed can-  
not be decreased any further.  
Press the Start Program button or the Speed +  
button to start the program.  
5
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings for the program. Hold the handrails  
and begin walking.  
The pulse-driven program is divided into several  
time segments of different lengths. The main dis-  
play will show both the time remaining in the pro-  
gram and the time remaining in the current seg-  
ment of the program. One target heart rate setting  
is programmed for  
If your pulse is not detected during the program,  
the letters “PLS” will flash in the main display and  
the speed and incline of the treadmill may auto-  
matically decrease until your pulse is detected. If  
this occurs, refer to the instructions included with  
the optional chest pulse sensor.  
each segment. The  
Current Segment  
target heart rate  
setting for the first  
segment will be  
shown in the flash-  
ing Current  
To stop the program, press the Stop button. The  
pulse-driven program should not be stopped tem-  
porarily and then restarted. To use the pulse-dri-  
ven program again, reselect the program and start  
it at the beginning.  
Segment column of  
the program display. The target heart rate settings  
for the next thirteen segments will be shown in the  
thirteen columns to the right.  
Follow your progress with the displays.  
Refer to step 5 on page 11.  
6
7
When only three seconds remain in the first seg-  
ment of the program, both the Current Segment  
column and the column to the right will flash, a se-  
ries of tones will sound, and all target heart rate  
settings will move one column to the left. The tar-  
When the program has ended, remove the key.  
See step 6 on page 13.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR PORTABLE STEREO  
HOW TO CONNECT THE TREADMILL TO YOUR  
CD PLAYER, VCR, OR COMPUTER  
Note: If your stereo has an RCA-type AUDIO OUT  
jack, see instruction A below. If your stereo has a  
3.5mm LINE OUT jack, see instruction B. If your  
stereo has only a PHONES jack, see instruction C.  
To use iFit.com CD’s, the treadmill must be con-  
nected to your portable CD player, portable stereo,  
home stereo, or computer with CD player. See this  
page and page 20 for connecting instructions. To use  
iFIT.com videocassettes, the treadmill must be con-  
nected to your VCR. See page 21 for connecting in-  
structions. To use iFIT.com programs directly from  
our internet site, the treadmill must be connected to  
your home computer. See page 20 for connecting in-  
structions.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter. Plug  
the adapter into an AUDIO OUT jack on your stereo.  
A
AUDIO OUT  
RIGHT  
LEFT  
HOW TO CONNECT YOUR PORTABLE CD PLAYER  
Note: If your CD player has separate LINE OUT and  
PHONES jacks, see instruction A below. If your CD  
player has only one jack, see instruction B.  
Audio  
Cable  
Adapter  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your CD player. Plug your headphones into the  
PHONES jack.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your stereo.  
A
PHONES LINE OUT  
B
LINE OUT  
PHONES  
LINE OUT  
Head-  
phones  
Audio  
Cable  
Audio  
Cable  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your CD player. Plug your  
headphones into the other side of the Y-adapter.  
C. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your stereo. Plug your  
headphones into the other side of the Y-adapter.  
B
PHONES  
C
PHONES  
3.5mm  
PHONES  
Y-adapter  
Audio  
Cable  
3.5mm  
Y-adapter  
Audio  
Cable  
Headphones  
Headphones  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR HOME STEREO  
HOW TO CONNECT YOUR COMPUTER  
Note: If your stereo has an unused LINE OUT jack,  
see instruction A below. If the LINE OUT jack is  
being used, see instruction B.  
Note: If your computer has a 3.5mm LINE OUT jack,  
see instruction A. If your computer has only a  
PHONES jack, see instruction B.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the LINE OUT jack on your  
stereo.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your computer.  
A
A
CD  
LINE OUT  
VCR  
Amp  
LINE OUT  
Audio  
Cable  
LINE OUT  
Audio  
Cable  
Adapter  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your computer. Plug your  
headphones or speakers into the other side of the  
Y-adapter.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA Y-adapter (available  
at electronics stores). Next, remove the wire that is  
currently plugged into the LINE OUT jack on your  
stereo and plug the wire into the unused side of the  
RCA Y-adapter. Plug the RCA Y-adapter into the  
LINE OUT jack on your stereo.  
B
PHONES  
B
CD  
Audio  
Cable  
3.5mm  
Y-adapter  
VCR  
Amp  
LINE OUT  
Headphones/Speakers  
RCA  
Y-adapter  
Audio  
Adapter  
Cable  
Wire removed from  
LINE OUT jack  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR VCR  
HOW TO USE iFIT.COM CD AND VIDEO  
PROGRAMS  
Note: If your VCR has an unused AUDIO OUT jack,  
see instruction A below. If the AUDIO OUT jack is  
being used, see instruction B. If you have a TV  
with a built-in VCR, see instruction B. If your VCR  
is connected to your home stereo, see HOW TO  
CONNECT YOUR HOME STEREO on page 20.  
To use iFIT.com CD’s or videocassettes, the treadmill  
must be connected to your portable CD player, portable  
stereo, home stereo, computer with CD player, or  
VCR. See HOW TO CONNECT THE TREADMILL TO  
YOUR CD PLAYER, VCR, OR COMPUTER on page  
19. Note: To purchase iFIT.com CD’s or videocas-  
settes, call toll-free 1-800-735-0768.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the AUDIO OUT jack on your  
VCR.  
Follow the steps below to use an iFIT.com CD or video  
program.  
A
Insert the key fully into the console.  
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
1
CH  
3
4
OUT  
See GETTING STARTED on page 10.  
AUDIO OUT  
RIGHT  
LEFT  
Select the iFIT.com mode.  
2
Audio  
Cable  
Adapter  
When the key is in-  
serted, the manual  
mode will automatically  
be selected. To use an  
iFIT.com CD or video  
program, press the  
iFIT.com button. The indicator beside the iFIT.com  
button will light.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA adapter (available at  
electronics stores). Next, remove the wire that is  
currently plugged into the AUDIO OUT jack on your  
VCR and plug the wire into the unused side of the  
RCA adapter. Plug the RCA adapter into the AUDIO  
OUT jack on your VCR.  
Insert the iFIT.com CD or videocassette.  
3
If you are using an iFIT.com CD, insert the CD  
into your CD player. If you are using an iFIT.com  
videocassette, insert the videocassette into your  
VCR.  
Press the PLAY button on your CD player or  
VCR.  
B
4
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
CH  
3
4
OUT  
A moment after the button is pressed, your per-  
sonal trainer will begin guiding you through your  
workout. Simply follow your personal trainer’s  
instructions. Note: If the time is flashing in the  
main display, press the Start button or the Speed  
+ button on the console. The treadmill will not re-  
spond to a CD or video program when the time is  
flashing.  
RCA Adapter  
Adapter  
Audio  
Cable  
Wire removed from  
AUDIO OUT jack  
During the CD or video program, an electronic  
“chirping” sound will alert you when the speed  
and/or incline of the treadmill is about to change.  
CAUTION: Always listen for the “chirp” and be  
prepared for speed and/or incline changes. In  
some instances, the speed and/or incline may  
change before the personal trainer describes  
the change.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the Speed or Incline buttons on  
the console. However, when the next “chirp” is  
heard, the speed and/or incline will change to  
the next settings of the CD or video program.  
• adjust the volume of your CD player or VCR. If  
the volume is too high or too low, the console  
may not detect the program signals.  
• make sure that the audio cable is properly  
connected, that it is fully plugged in, and that  
it is not wrapped around a power cord.  
To stop the walking belt at any time, press the  
Stop button on the console. The time will begin to  
flash in the main display. To restart the program,  
press the Start Program button or the Speed +  
button. After a moment, the walking belt will begin  
to move at 1.0 mph. When the next “chirp” is  
heard, the speed and incline will change to the  
next settings of the CD or video program. The  
program can also be stopped by pressing the  
Stop button on your CD player or VCR.  
• if you are using your portable CD player and  
the CD skips, set the CD player on the floor or  
another flat surface instead of on the console.  
Follow your progress with the LED track and  
the displays.  
5
See step 5 on page 11.  
Measure your heart rate, if desired.  
Refer to step 6 on page 12.  
6
7
When the CD or video program is completed, the  
walking belt will stop and the time will begin to flash  
in the main display. Note: To use another CD or  
video program, press the Stop button or remove  
the key and go to step 1 on page 21.  
When the program is completed, remove the  
key.  
See step 6 on page 13.  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard:  
• make sure that the iFIT.com indicator is lit and  
that the time is not flashing in the main dis-  
play. If the time is flashing, press the Start  
button or the Speed + button on the console.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Return to the treadmill and stand on the foot  
rails. Find the clip attached to the key and slide  
the clip onto the waistband of your clothing.  
HOW TO USE PROGRAMS DIRECTLY FROM  
OUR INTERNET SITE  
7
When the on-screen countdown ends, the program  
will begin and the walking belt will begin to move.  
Hold the handrails, step onto the walking belt, and  
begin walking. During the program, an electronic  
“chirping” sound will alert you when the speed  
and/or incline of the treadmill is about to change.  
CAUTION: Always listen for the “chirp” and be  
prepared for speed and/or incline changes.  
access a selection of programs that interactively con-  
trol your treadmill to help you achieve your specific ex-  
ercise goals. In addition, you can play iFIT.com audio  
and video programs directly from the internet. By  
adding an optional upgrade module to the console, you  
can use virtually endless features from our internet site.  
grade module, call toll-free 1-800-735-0768.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the Speed or Incline buttons on  
the console. However, when the next “chirp” is  
heard, the speed and/or incline will change to  
the next settings of the program.  
To use programs from our internet site, the treadmill  
must be connected to your home computer. See HOW  
TO CONNECT YOUR COMPUTER on page 20. In  
addition, you must have an internet connection and  
an internet service provider. A list of specific system  
requirements will be found on our internet site.  
To stop the walking belt at any time, press the  
Stop button on the console. The time will begin to  
flash in the main display. To restart the program,  
press the Start Program button or the Speed +  
button. After a moment, the walking belt will begin  
to move at 1.0 mph. When the next “chirp” is  
heard, the speed and incline will change to the  
next settings of the program.  
Follow the steps below to use a program from our  
internet site.  
Insert the key fully into the console.  
1
See GETTING STARTED on page 10.  
Select the iFIT.com mode.  
When the program is completed, the walking belt  
will stop and the time will begin to flash in the time  
display. Note: To use another program, press the  
Stop button and go to step 5.  
2
When the key is in-  
serted, the manual  
mode will automatically  
be selected. To use a  
program from our inter-  
net site, press the  
iFIT.com button. The indicator beside the iFIT.com  
button will light.  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard, make  
sure that the iFIT.com indicator is lit and that  
the Time display is not flashing. In addition,  
make sure that the audio cable is properly con-  
nected, that it is fully plugged in, and that it is  
not wrapped around a power cord.  
Go to your computer and start an internet  
connection.  
3
Follow your progress with the LED track and  
the displays.  
8
9
Start your web browser, if necessary, and go to  
4
See step 5 on page 11.  
Follow the desired links on our internet site to  
select a program.  
5
When the program has ended, remove the key.  
See step 6 on page 13.  
Read and follow the on-line instructions for using a  
program.  
Follow the on-line instructions to start the  
program.  
6
When you start the program, an on-screen count-  
down will begin.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE INFORMATION MODE/DEMO MODE  
THE OPTIONAL CHEST PULSE SENSOR  
The console features an information mode that keeps  
track of the total number of hours that the treadmill has  
been operated and the total number of miles that the  
walking belt has moved. The information mode also  
allows you to switch the console from miles per hour to  
kilometers per hour. In addition, the information mode  
allows you to turn on and turn off the demo mode.  
An optional chest pulse sensor adds even more  
features to the console. The chest pulse sensor provides  
hands-free operation and continuously monitors your  
heart rate during your workouts. To purchase the  
optional chest pulse sensor, call toll-free 1-888-  
825-2588.  
To select the information mode, hold down the Stop  
button while inserting the key into the console. When  
the information mode is selected, the main display will  
show the following information:  
This section of the main  
display will show the total  
number of miles that the  
walking belt has moved.  
This section of the main  
display will show the total  
number of hours that the  
treadmill has been used.  
THE OPTIONAL iFIT.COM MODULE  
By adding an optional  
iFIT.com module to the  
treadmill, you can use vir-  
tually endless features  
from our internet site.  
Imagine on-line competi-  
tions, personal training  
sessions via the internet,  
and the ability to use your computer to track your work-  
outs. For information about purchasing the optional  
iFIT.com module, call toll-free 1-800-735-0768.  
An “E” for English miles or  
an “M” for metric kilometers  
will appear on the right side  
of the main display. Press  
the Speed + button to  
change the unit of measure-  
ment.  
IMPORTANT: Make sure  
that there is not a letter  
“D” in the main display. If  
a “D” appears in the display,  
the console is in the “demo”  
mode. This mode is intended  
to be used only when a treadmill is displayed in a store.  
When the console is in the demo mode, the power cord  
can be plugged in, the key can be removed from the  
console, and the displays and indicators on the console  
will automatically light in a preset sequence, although  
the buttons on the console will not operate. If a “D” ap-  
pears in the display when the information mode is  
selected, press the Speed – button so the display is  
blank.  
To exit the information mode, remove the key from the  
console.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
1
Before folding the treadmill, adjust the incline to the  
lowest position. If this is not done, the treadmill may be per-  
manently damaged. Remove the key and unplug the power  
cord. CAUTION: You must be able to safely lift 45 pounds  
(20 kg) in order to raise, lower, or move the treadmill.  
1. Hold the treadmill with your hands in the locations shown  
at the right. CAUTION: To decrease the possibility of in-  
jury, bend your legs and keep your back straight. As  
you raise the treadmill, make sure to lift with your legs  
rather than your back. Raise the treadmill about halfway  
to the vertical position.  
2. Move your right hand to the position shown and hold the  
2
treadmill firmly. Using your left hand, pull the latch knob to  
the left and hold it. Raise the treadmill until the latch pin is  
aligned with the hole in the catch. Insert the latch pin into  
the catch. Make sure that the latch pin is fully inserted  
into the catch.  
To protect the floor or carpet from damage, place a  
Knob  
Catch  
mat under the treadmill. Keep the treadmill out of  
direct sunlight. Do not leave the treadmill in the stor-  
age position in temperatures above 85° Fahrenheit.  
HOW TO MOVE THE TREADMILL  
Before moving the treadmill, convert the treadmill to the stor-  
age position as described above. Make sure that the pin  
on the lock knob is inserted into the slot in the catch.  
1. Hold the handrails as shown and place one foot against a  
wheel.  
2. Tilt the treadmill back until it rolls freely on the front wheels.  
Carefully move the treadmill to the desired location. Never  
move the treadmill without tipping it back. To reduce  
the risk of injury, use extreme caution while moving  
the treadmill. Do not attempt to move the treadmill  
over an uneven surface.  
Base  
3. Place one foot on the base, and carefully lower the tread-  
mill until it is resting in the storage position.  
Front Wheels  
HOW TO LOWER THE TREADMILL FOR USE  
1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left  
hand, pull the lock knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the lock  
knob. Note: You may need to push the handrail to the side slightly.  
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not  
drop the treadmill frame to the floor. CAUTION: To decrease the possibility of injury, bend your legs  
and keep your back straight.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE-SHOOTING  
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and  
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-  
free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).  
PROBLEM: The power does not turn on  
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor  
is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor  
that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor  
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation  
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.  
Important: The treadmill is not compatible with GFCI-equipped outlets.  
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.  
c. Check the circuit breaker located on the treadmill  
c
near the power cord. If the switch protrudes as  
shown, the circuit breaker has tripped. To reset the  
circuit breaker, wait for five minutes and then press  
the switch back in.  
Tripped  
Reset  
d. Check the on/off switch located on the treadmill near  
the power cord. The switch must be in the on position.  
d
On  
Position  
PROBLEM: The power turns off during use  
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the  
circuit breaker has tripped, wait for five minutes and then press the switch back in.  
b. Make sure that the power cord is plugged in.  
c. Remove the key from the console. Reinsert the key fully into the console.  
d. Make sure that the on/off switch is in the on position.  
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.  
PROBLEM: The displays of the console do not function properly  
SOLUTION: a. Remove the key from the console and unplug the  
a
power cord. Carefully tip the treadmill down as shown  
in drawing a. Remove the Screws (39, 83) from the  
hood. Raise the Uprights (69) and carefully remove  
the hood.  
39  
83  
69  
Locate the Reed Switch (10) and the Magnet (7) on  
the left side of the Pulley (8). Turn the Pulley until the  
Magnet is aligned with the Reed Switch. Make sure  
that the gap between the Magnet and the Reed  
Switch is about 1/8”. If necessary, loosen the Screw  
(100) and move the Reed Switch slightly. Retighten  
the Screw. Re-attach the hood, and run the treadmill  
for a few minutes to check for a correct speed reading.  
1/8”  
8
100  
10  
7
Top  
View  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The walking belt slows when walked on  
SOLUTION: a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less  
in length.  
b. If the walking belt is overtightened, treadmill perfor-  
b
mance may decrease and the walking belt may be-  
come damaged. Remove the key and UNPLUG THE  
POWER CORD. Using the allen wrench, turn both  
rear roller adjustment bolts counterclockwise, 1/4 of a  
turn. When the walking belt is properly tightened, you  
should be able to lift each side of the walking belt 3 to  
4 inches off the walking platform. Be careful to keep  
the walking belt centered. Plug in the power cord, in-  
sert the key and run the treadmill for a few minutes.  
Repeat until the walking belt is properly tightened.  
3”–4”  
Rear Roller Adjustment Bolts  
c. If the walking belt still slows, please call our Customer Service Department, toll-free.  
PROBLEM: The walking belt is off-center  
SOLUTION: a. If the walking belt has shifted to the left, first remove  
the key and UNPLUG THE POWER CORD. Using the  
allen wrench, turn the left rear roller adjustment bolt clock-  
wise, and the right bolt counterclockwise, 1/4 of a turn each.  
Be careful not to overtighten the walking belt. Plug in the  
power cord, insert the key and run the treadmill for a few  
minutes. Repeat until the walking belt is centered.  
a
b. If the walking belt has shifted to the right, first remove  
the key and UNPLUG THE POWER CORD. Using the  
allen wrench, turn the left rear roller adjustment bolt coun-  
terclockwise, and the right bolt clockwise, 1/4 of a turn  
each. Be careful not to overtighten the walking belt. Plug  
in the power cord, insert the key and run the treadmill for  
a few minutes. Repeat until the walking belt is centered.  
b
PROBLEM: The walking belt slips when walked on  
SOLUTION: a. If the walking belt slips when walked on, first remove the  
key and UNPLUG THE POWER CORD. Using the allen  
wrench, turn both rear roller adjustment bolts clockwise,  
1/4 of a turn. When the walking belt is correctly tightened,  
you should be able to lift each side of the walking belt 3 to  
4 inches off the walking platform. Be careful to keep the  
walking belt centered. Plug in the power cord, insert the  
key and carefully walk on the treadmill for a few minutes.  
Repeat until the walking belt is properly tightened.  
a
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com  
CD’s and videos are played  
SOLUTION: a. With the key in the console, press one of the incline buttons. While the incline is changing, re-  
move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the  
maximum incline level and then return to the minimum level. This will recalibrate the incline system.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
uses easily accessible carbohydrate calories for en-  
ergy. Only after the first few minutes does your body  
begin to use stored fat calories for energy. If your goal  
is to burn fat, adjust the speed and incline of the tread-  
mill until your heart rate is near the lowest number in  
your training zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for individu-  
als over the age of 35 or individuals with pre-  
existing health problems.  
For maximum fat burning, adjust the speed and incline  
of the treadmill until your heart rate is near the middle  
number in your training zone.  
The pulse sensor is not a medical device.  
Various factors, including your movement,  
may affect the accuracy of heart rate readings.  
The sensor is intended only as an exercise aid  
in determining heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for  
prolonged periods of time. This increases the demand  
on the heart to pump blood to the muscles, and on the  
lungs to oxygenate the blood. For aerobic exercise,  
adjust the speed and incline of the treadmill until your  
heart rate is near the highest number in your training  
zone.  
The following guidelines will help you to plan your ex-  
ercise program. Remember—these are general guide-  
lines only. For more detailed exercise information, ob-  
tain a reputable book or consult your physician.  
EXERCISE INTENSITY  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning and aerobic exercise.  
WORKOUT GUIDELINES  
Each workout should include the following three parts:  
A Warm-up—Start each workout with 5 to 10 minutes  
of stretching and light exercise. A proper warm-up in-  
creases your body temperature, heart rate and circula-  
tion in preparation for exercise.  
Training Zone Exercise—After warming up, increase  
the intensity of your exercise until your pulse is in your  
training zone for 20 to 60 minutes. (During the first few  
weeks of your exercise program, do not keep your  
pulse in your training zone for longer than 20 minutes.)  
Breathe regularly and deeply as you exercise—never  
hold your breath.  
To find the proper heart rate for you, first find your age  
near the bottom of the chart (ages are rounded off to  
the nearest ten years). Next, find the three numbers  
above your age. The three numbers define your “train-  
ing zone.” The lower two numbers are recommended  
heart rates for fat burning; the higher number is the  
recommended heart rate for aerobic exercise.  
A Cool-down—Finish each workout with 5 to 10 min-  
utes of stretching to cool down. This will increase the  
flexibility of your muscles and will help prevent post-ex-  
ercise problems.  
To measure your heart rate during exercise, use the  
pulse sensor on the console. If your heart rate is too  
high or too low, adjust the speed and incline of the  
treadmill.  
Exercise Frequency  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest be-  
tween workouts. After a few months, you may com-  
plete up to five workouts each week if desired.  
Fat Burning  
To burn fat effectively, you must exercise at a relatively  
low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
The key to success is to make exercise a regular and  
enjoyable part of your everyday life.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUGGESTED STRETCHES  
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.  
1. Toe Touch Stretch  
Stand with your knees bent slightly and slowly bend forward  
1
from your hips. Allow your back and shoulders to relax as you  
reach down toward your toes as far as possible. Hold for 15  
counts, then relax. Repeat 3 times. Stretches: Hamstrings, back  
of knees and back.  
2. Hamstring Stretch  
Sit with one leg extended. Bring the sole of the opposite foot to-  
2
ward you and rest it against the inner thigh of your extended  
leg. Reach toward your toes as far as possible. Hold for 15  
counts, then relax. Repeat 3 times for each leg. Stretches:  
Hamstrings, lower back and groin.  
3. Calf/Achilles Stretch  
With one leg in front of the other, reach forward and place your  
hands against a wall. Keep your back leg straight and your back  
foot flat on the floor. Bend your front leg, lean forward and move  
your hips toward the wall. Hold for 15 counts, then relax.  
Repeat 3 times for each leg. To cause further stretching of the  
achilles tendons, bend your back leg as well. Stretches: Calves,  
achilles tendons and ankles.  
3
4
4. Quadriceps Stretch  
With one hand against a wall for balance, reach back and grasp  
one foot with your other hand. Bring your heel as close to your  
buttocks as possible. Hold for 15 counts, then relax. Repeat 3  
times for each leg. Stretches: Quadriceps and hip muscles.  
5. Inner Thigh Stretch  
Sit with the soles of your feet together and your knees outward.  
Pull your feet toward your groin area as far as possible. Hold for  
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps  
and hip muscles.  
5
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. NTTL17900  
R0301A  
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
2
3
4
5
6
7
8
2
2
2
1
2
2
1
1
8
1
4
1
1
3
1
1
1
1
1
1
1
2
1
1
4
1
9
1
1
1
1
1
1
2
1
1
1
1
2
2
1
1
1
1
4
2
4
1
16  
1
1
Foot Rail Insert  
Foot Rail  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63**  
64**  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
101  
102  
1
6
2
2
5
1
1
2
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
4
1
4
4
2
1
1
1
2
1
1
1
4
1
1
10  
3
7
2
2
2
1
1
1
5
13  
1
2
Walking Platform  
Platform Screw  
Rear Platform Screw  
Rear Isolator  
Ground Screw/Controller Screw  
Ground Wire  
Rear Endcap  
Rear Roller Adj. Bolt  
Warning Decal  
Allen Wrench  
Rear Roller  
Optional Chest Pulse Strap  
Optional Chest Pulse  
Handrail Spacer  
Handrail  
Endcap Clip  
Lock Knob  
Upright  
Lock Knob Sleeve  
Spring  
Lock Pin Collar  
Pin Clip  
Lock Pin  
Handrail Bushing  
Pulse Grip  
Handrail Washer  
Handrail Bolt  
Upright Endcap  
Pulley Nut  
Console Base  
Console  
Belly Pan Screw (Short)  
Key/Clip  
Foot Rail Cap Screw  
Left Foot Rail Cap  
Frame Pivot Bolt  
Frame Pivot Spacer  
Magnet  
Front Roller/Pulley  
Frame Pivot Nut  
Reed Switch/Sensor Wire  
U-nut  
Reed Switch Clip  
Lift Frame  
Star Washer  
Idler Assembly  
Motor/Pulley/Flywheel/Fan  
Idler Arm  
9
10  
11  
12  
13  
14  
15*  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33*  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
Motor Belt  
Idler Pulley  
Tension Bolt  
Incline Motor Bolt  
Motor Bolt  
Hood  
Short Incline Motor Bolt  
Plastic Stand-Off  
Power Board  
Screw  
Pulley Spacer  
Controller  
Electronics Plate  
8” Wire Harness  
Front Roller Adj. Bolt  
Latch Assembly  
Roller Washer  
Front Roller Nut  
Incline Motor  
Incline Motor Stop  
Belly Pan  
Belly Pan Screw (Long)  
Static Decal  
Circuit Breaker  
Power Cord  
On/Off Switch  
Left Endcap Insert  
Belt Guide Screw  
Belt Guide  
Isolator  
Idler Spring  
Fastener  
Belly Pan  
iFIT.com Wire  
Jack  
Handrail Endcap  
Console Back  
Releaseable Tie  
1” Console Screw  
Cable Tie Clamp  
8” Cable Tie  
Lift Pivot Bolt  
Wheel Bolt  
Wheel  
Right Endcap Insert  
Grommet  
Upright Wire Harness  
Base Pad  
Screw  
Tension Nut  
Right Foot Rail Cap  
Extension Leg  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
103  
104  
105  
106*  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
2
2
1
2
2
1
1
1
7
1
1
1
1
1
1
2
2
1
Extension Cap  
Incline Warning Decal  
Shock  
Extension Leg Assembly  
1 3/4” Console Screw  
Book Holder  
Power Cord Grommet  
Frame  
Catch Screw/Pulse Screw  
Catch  
12” Audio Wire  
Walking Belt  
Tension Washer  
Idler Arm Bolt  
Lock Knob Spacer  
Hand Weight  
2” Console Screw  
Motor Isolator  
121  
122  
#
#
#
#
#
#
#
#
#
#
#
1
1
2
1
1
1
1
1
1
1
1
1
1
Audio Wire Nut  
Grounding Bracket  
Thick Base Pad  
12” White Wire, M/F  
10” White Wire, 2F  
14” Blue Wire, 2F  
8” Blue Wire, M/F  
4” Blue Wire, 2F  
4” Black Wire, 2F  
12” Green Wire, 2 Ring  
8” Green Wire, F/Ring  
7” Green Wire, M/Ring  
User's Manual  
* Includes all parts shown in the box  
**For information about the optional chest pulse  
sensor, see page 24  
# These parts are not illustrated  
ORDERING REPLACEMENT PARTS  
To order replacement parts, call our Customer Service Department toll-free at 1-888-825-2588, Monday through  
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give  
the following information:  
• The MODEL NUMBER OF THE PRODUCT (NTTL17900)  
• The NAME OF THE PRODUCT (NordicTrack® SUMMIT 5500 treadmill)  
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)  
• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST on pages 30 and 31 and the  
EXPLODED DRAWING attached in the center of this manual).  
If possible, place the treadmill near your telephone for easy reference when calling.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. NTTL17900  
R0301A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. NTTL17900  
R0301A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
WHAT IS COVERED—The entire NordicTrack® SUMMIT 5500 treadmill (“Product”) is warranted to be free of all defects  
in material and workmanship.  
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.  
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the motor for three years after the date  
of purchase. The belt and deck are covered for two years after the date of purchase. All mechanical components are  
covered for two years after the date of purchase. All electrical components are covered for two years after the date of  
purchase. Labor is covered for one year. The hood, covers, belly pan, and decals are covered for six months after the  
date of purchase.  
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or  
component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized  
service provider, or, at our option, we will replace the Product.  
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, im-  
proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to  
use, operate, and maintain as set out in your User’s Manual (“Manual”). This warranty does not extend to products used  
for commercial or rental purposes or to products used as store display modules.  
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the  
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discov-  
ery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.  
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product.  
Remember to do the periodic maintenance requirements specified in the Manual to assure proper operation and your  
continued satisfaction.  
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them  
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if neces-  
sary, arrange for service where your Product is located or advise you how to ship the Product for service. Before ship-  
ping, always obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack  
your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the  
product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the ser-  
vice is covered by warranty.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the  
use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or  
profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature.  
Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above lim-  
itation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability  
or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not  
allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.  
No one is authorized to change, modify or extend the terms of this limited warranty.  
This warranty gives you specific legal rights and you may have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
NordicTrack is a registered trademark of ICON Health & Fitness, Inc.  
Part No. 173174 R0301A  
Printed in USA © 2001 ICON Health & Fitness, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Power Hammer 5369 21 User Manual
Nikon Camera Accessories WC E68 User Manual
Nuvo Universal Remote NV LRC1 User Manual
Omnimount TV Video Accessories MORELLO50 User Manual
Onkyo Stereo Receiver TX L55 User Manual
Oreck Vacuum Cleaner David User Manual
Panasonic Computer Hardware KX FKN512 User Manual
Panasonic Stereo Receiver AJ SD930B User Manual
Panasonic Vacuum Cleaner MC CG663 User Manual
Patton electronic Network Router 07MOS10xx GS User Manual