Model No. NTHK99901
Serial No.
USER'S MANUAL
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through di-
rect assistance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
Patent Pending
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the TREKKER.
1. It is the responsibility of the owner to ensure
that all users of the TREKKER are adequately
informed of all warnings and precautions.
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
13. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi-
pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local NordicTrack dealer or call 1-888-
825-2588 and order part number 146148.
2. Use the TREKKER only as described in this
manual.
3. The TREKKER is intended for in-home use
only. Do not use the TREKKER in any com-
mercial, rental, or institutional setting.
4. Place the TREKKER on a level surface, with at
least eight feet of clearance behind it. Do not
place the TREKKER on any surface that
blocks air openings. To protect the floor or
carpet from damage, cover the floor under the
TREKKER.
14. Keep the power cord and the surge suppres-
sor away from heated surfaces.
15. The roller guards must be 1/8 inch from the
rear roller (the location of the roller guards is
shown on page 5). Unplug the power cord
and adjust the roller guards, if necessary.
5. Keep the TREKKER indoors, away from mois-
ture and dust. Do not put the TREKKER in a
garage or covered patio, or near water.
6. Do not operate the TREKKER where aerosol
products are used or where oxygen is being
administered.
16. Never move the walking belt while the power
is turned off. Do not operate the TREKKER if
the power cord or plug is damaged, or if the
TREKKER is not working properly. (See
BEFORE YOU BEGIN on page 5 if the
7. Do not operate the TREKKER until it is prop-
erly assembled. (See ASSEMBLY on page 6.)
You must be able to safely lift 45 pounds (20
kg) in order to move the TREKKER.
TREKKER is not working properly.)
17. Never start the TREKKER while you are
standing on the walking belt. Always hold the
handrails while using the TREKKER.
8. Keep children under the age of 12 and pets
away from the TREKKER at all times.
18. The TREKKER is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
9. The TREKKER should not be used by persons
weighing more than 300 pounds.
10. Never allow more than one person on the
TREKKER at a time.
19. The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
11. Wear appropriate exercise clothing when using
the TREKKER. Do not wear loose clothing that
could become caught in the TREKKER.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the TREKKER with bare feet,
wearing only stockings, or in sandals.
20. Never leave the TREKKER unattended while it
is running. Remove the key, unplug the power
cord, and move the on/off switch to the off po-
sition when the TREKKER is not in use. (The lo-
cation of the on/off switch is shown on page 5.)
12. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
21. Do not change the grade of the TREKKER by
placing objects under it.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
22. Never insert or drop any object into any
opening.
25. Always remove iFIT.com CD’s and videocas-
settes from your CD player or VCR when they
are not in use.
23. When using iFIT.com CD’s and videocas-
settes, an electronic “chirping” sound will
alert you when the grade and/or speed of the
TREKKER is about to change. Always listen
for the “chirp” and be prepared for grade
and/or speed changes. In some instances, the
grade and/or speed may change before the
personal trainer describes the change.
26. Inspect and tighten all parts of the TREKKER
regularly.
27.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the TREKKER, and before performing the
maintenance and adjustment procedures de-
scribed in this manual. Never remove the
motor cover unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
24. When using iFIT.com CD’s and videocassettes,
you can manually override the grade and
speed settings by pressing the grade and
speed buttons. However, when the next “chirp”
is heard, the grade and/or speed will change to
the next settings of the CD or video program.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decal shown at the right has been
placed on the TREKKER in the two in-
dicated locations. If the decal in either
location is missing or illegible, call our
Customer Service Department toll-free
to order a free replacement decal (see
ORDERING REPLACEMENT PARTS on
the back cover of this manual). Apply
the decal in the location shown.
Note: The decal is shown
at 52% of actual size.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Thank you for selecting the revolutionary NordicTrack®
ADVENTURER TREKKERTM. The ADVENTURER
combines state-of-the-art technology with innovate de-
sign to provide you with a motivating and effective form
of exercise in the convenience of your home.
2588, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time (excluding holidays). To help us assist
you, please note the product model number and serial
number before calling. The product model number is
NTHK99901. The serial number can be found on a
decal attached to the TREKKER (see the front cover of
this manual for the location).
For your benefit, read this manual carefully before
using the ADVENTURER TREKKER. If you have
questions after reading this manual, please call our
Customer Service Department toll-free at 1-888-825-
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Water Bottle Holder*
Console
Book Holder
Key/Clip
Handrail
RIGHT SIDE
LEFT SIDE
Walking Belt
Foot Rail
Cushioned Walking
Platform
Roller
Guards
Circuit Breaker
Power
Cord
BACK
On/Off Switch
Roller Adjustment Bolts
*No water bottle is included.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Assembly requires two people. Set the TREKKER in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own Phillips screwdriver
.
Note: The underside of the TREKKER walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect performance. If there is lubricant on top of the walking belt, simply wipe off the lubri-
cant with a soft cloth and a mild, non-abrasive cleaner.
1. Identify the right Upright (23), which has the Upright Wire
1
Harness (100) inside of it. Slide an Upright Collar (54)
onto the Upright.
23
54
100
2. Remove the six Upright Bolts (33) from the right and left
2
23
posts on the Base (101).
Hole
While a second person holds the right Upright (23), con-
nect the Upright Wire Harness (100) to the Base Wire
Harness (41) in the right post on the Base (101). Insert
both Wire Harnesses into the post.
Holes
100
41
Make sure that the right Upright (23) is in the position
shown in drawing 1. Note: If the Upright Bolts are in the
holes in the post, remove them. Slide the Upright onto the
right post on the Base (101) and align the indicated holes.
Be careful not to pinch the Wire Harnesses (100, 41).
Hole
101
Holes
3. Slide the Upright Collar (54) to the position shown.
Finger tighten three Upright Bolts (33) with Upright
Washers (32) into the right Upright (23). Note: It may be
necessary to move the Upright slightly to align the holes.
3
23
33
Attach the left Upright (not shown) in the same way.
Note: There is not a wire harness in the left Upright.
32
Do not tighten the Upright Bolts (33) yet.
32
33
54
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Set the Console (99) and the Handrail (27) on the floor.
4
Locate the Handrail Wire Harness (30) in the Handrail
(27). While a second person holds the Console (99), con-
nect the 8-pin wire of the Handrail Wire Harness to the
HD2 connector on the back of the Console. Next, con-
nect the 4-pin wire to the IFIT2 connector, and the 3-pin
wire to the HD1 connector in the location shown.
HD1
IFIT2
HD2
30
99
27
5. Attach the Console (99) to the Handrail (27) with the four
Small Screws (6). Make sure that the Handrail Wire
Harness (not shown) is not pinched between the
Console and the Handrail.
6
5
99
6
27
6
6. Place a Handrail Cover (53) on each Upright (23). Make
sure that the Handrail Covers are turned as shown in the
inset drawing.
6
Have a second person hold the Handrail (27) in the posi-
tion shown. Connect the Handrail Wire Harness (30) to
the Upright Wire Harness (100). Insert both Wire
Harnesses into the right Upright (23).
86
27
114
53
Hold a Metal Spacer (114) inside the right Upright (23)
and align it with the first hole in the Upright. Insert a
Handrail Bolt (25) with a Handrail Star Washer (26)
through the Upright and the Metal Spacer. Hold the
Handrail (27) above the Handrail Covers (53) and finger
tighten the Handrail Bolt into the Handrail. Repeat this
procedure on the left side. Then, tighten the two remain-
ing Handrail Bolts with Handrail Star Washers into the
Handrail. Be careful not to pinch the wires.
26
86
25
114
30
23
53
26
100
27
23
53
23
25
Tighten all of the bolts used in steps 3 and 6. Press the
Large Endcaps (86) into the Uprights (23).
7. Make sure that all parts are tightened before you use the TREKKER. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 22). To protect the floor or carpet
from damage, cover the floor under the TREKKER.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation and Adjustment
THE PERFORMANT LUBETM WALKING BELT
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
Your TREKKER features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
1
HOW TO PLUG IN THE POWER CORD
Grounded Outlet Box
Surge Suppressor
Grounding Pin
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
Grounding Pin
Grounded Outlet
Grounding Plug
installed by a qualified electrician.
2
Grounded Outlet Box
Adapter
Your TREKKER, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can re-
sult from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your TREKKER being damaged, always use a
surge suppressor with your TREKKER (see draw-
ing 1 at the right).
Surge Suppressor
Lug
Metal Screw
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
To purchase a surge suppressor, see your local
NordicTrack dealer or call 1-888-825-2588 and order
part number 146148. Use only a single-outlet surge
suppressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The TREKKER is not compatible with
GFCI-equipped outlets.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If there is a thin sheet
of clear plastic on the face
of the console, remove it.
Clip
Key
FEATURES OF THE CONSOLE
home stereo, portable stereo, or computer and play
special iFit.com CD programs (CD’s are available sep-
arately). IFit.com CD programs automatically control
the grade and speed of the TREKKER as a personal
trainer walks you through every step of your workout.
High-energy music provides added motivation. Each
CD features two programs designed by certified per-
sonal trainers.
The revolutionary TREKKER combines state-of-the-art
technology with innovate design to provide you with a
motivating and effective form of exercise in the conve-
nience of your home.
When the manual mode of the console is selected, the
grade and speed of the TREKKER can be changed with
a touch of a button. As you exercise, the console will
display continuous exercise feedback. You can even
track your heart rate using the optional heart rate moni-
tor (for information about the optional heart rate
monitor, see page 19).
In addition, you can connect the TREKKER to your VCR
and TV and play iFIT.com video programs (videocas-
settes are available separately). Video programs offer
the same benefits as iFIT.com CD programs, but add
the excitement of exercising with a class and an instruc-
tor— the hottest new trend at health clubs.
The console also offers fifteen preset programs. Each
preset program automatically controls the grade and
speed of the TREKKER to simulate a hiking trail as it
guides you through an effective workout. Choose from
moderate, challenging, and extreme programs.
With the TREKKER connected to your computer, you
and access audio programs and video programs directly
from the internet. And by adding an optional upgrade
module to the TREKKER, you can use virtually endless
complete details. To purchase iFIT.com CD’s or
videocassettes, call toll-free 1-800-735-0768. To
order the optional upgrade module, see page 19.
The console also features new iFIT.com interactive
technology. iFIT.com technology is like having a per-
sonal trainer right in your home. Using the included
audio cable, you can connect the TREKKER to your
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug in the power cord.
2
3
CAUTION:
Before operating the
console, read the following precautions.
See HOW TO PLUG IN THE POWER CORD on
page 8.
• Do not stand on the walking belt when turn-
ing on the power.
Move the on/off switch to the on position.
• Always wear the clip (see the drawing below)
while operating the TREKKER.
Locate the on/off switch
on the TREKKER near
On
the power cord. Move
Position
• Adjust the speed in small increments to
avoid sudden jumps in speed.
the on/off switch to the
on position.
• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and place only a sealed water
bottle in the water bottle holder.
Insert the key fully into the console.
4
Stand on the foot rails of the TREKKER. Attach
the clip securely to the waistband of your
clothing.
Next, insert the key into the console. After a mo-
ment, various displays and indicators on the con-
sole will light. Note: When the key is inserted, the
TREKKER may automatically calibrate itself by ris-
ing to the highest grade and then returning to the
lowest grade. If this occurs, the console will show
two dashes (– –) and one flashing indicator while
the TREKKER calibrates itself.
GETTING STARTED
Attach the clip to the waistband of your
clothing.
1
Stand on the foot rails
of the TREKKER.
Find the clip attached
to the key and slide
the clip onto the
waistband of your
clothing. Next, insert
To use the manual mode of the console, follow the
steps beginning on page 11. To use a preset pro-
gram, see page 12. To use an iFIT.com CD or video
program, see page 16. To use an iFIT.com program
directly from our internet site, see page 18.
Clip
Key
the key into the con-
sole. Test the clip by carefully taking a few
steps backward until the key is pulled from the
console. If the key is not pulled from the con-
sole, adjust the position of the clip as needed.
Then, remove the key from the console.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow your progress with the console displays.
HOW TO USE THE MANUAL MODE
5
The matrix—When the
manual mode or an
iFIT.com program is se-
lected, the matrix will dis-
Insert the key fully into the console.
1
See GETTING STARTED on page 10.
play a triangle represent-
ing a mountain. When the
Select the manual mode.
2
walking belt is started, the triangle will disappear
except for one flashing indicator. As you exercise,
the indicators in the triangle will light one at a time
until the entire triangle is again lit. This cycle will
then repeat. Each time the entire triangle lights,
you have walked 1/4 mile.
When the key is in-
serted, the manual
mode will automatically
be selected, as shown
by the Manual Control
indicator. If a preset
The exercise in-
tensity display—
As you exercise, the
row of indicators
program has been selected, press the Moderate,
Challenging, or Extreme button repeatedly until the
Manual indicator lights.
below the trail dis-
Press the Start button or the Speed + button to
start the walking belt.
3
play will show the intensity level of your exercise.
For example, if four to six indicators are lit, your in-
tensity level is equal to a moderate hike.
A moment after the button is pressed, the walking
belt will begin to move at 1 mile per hour. Hold the
handrails and begin walking.
The Speed display—
This display shows the
speed of the walking
belt.
As you exercise,
change the speed of
the walking belt as de-
sired by pressing the
Speed + and – buttons.
Note: The console can
Each time a button is
display speed and dis-
pressed, the speed setting will change by 0.1
mph; if a button is held down, the speed setting
will change in increments of 0.5 mph. To change
the speed setting quickly, press the 1-step Speed
buttons. The speed range is 0.5 mph to 6 mph.
Note: After the buttons are pressed, it will take a
moment for the walking belt to reach the selected
speed setting.
tance in either miles or
kilometers. To see which
unit of measurement is
selected, hold down the
Stop button while inserting the key into the console.
An “E” for English miles or an “M” for metric kilo-
meters will appear in the Speed display. Press the
Speed + button to change the unit of measure-
ment. When the desired unit of measurement is
selected, remove the key and then re-insert it.
Note: For simplicity, all instructions in this manual
refer to miles.
To stop the walking belt, press the Stop button.
The displays will pause and the Distance/Time
display will begin to flash. To restart the walking
belt, press the Start button or the Speed + button.
The Vertical Feet/
Cals./Grade display—
Change the grade of the TREKKER as desired.
4
This display shows the
number of vertical feet
you have climbed, the
To change the grade of
the TREKKER, press
the Grade
L
or
L
but-
grade of the TREKKER,
ton. Each time a button
is pressed, the grade
will change by 1%. To
change the grade quickly, press the 1-step Grade
buttons. The grade range is 0% to 25%. Note: After
the buttons are pressed, it will take a moment for
the TREKKER to reach the selected grade setting.
and the approximate number of calories you have
burned. The display will change from one number
to the next every seven seconds, as shown by the
indicators around the display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The Distance/Time
display—When the
HOW TO USE PRESET PROGRAMS
manual mode or an
The console offers fifteen preset programs. Each preset
program automatically controls the grade and speed of
the TREKKER to simulate a hiking trail as it guides you
through an effective workout. You can choose from five
moderate programs, five challenging programs, and five
extreme programs.
iFIT.com program is se-
lected, this display will
show the distance you
have hiked and the elapsed time. The distance will
be shown for seven seconds and the time will be
shown for fourteen seconds, as shown by the indi-
cators around the display.
Follow the steps below to use a preset program.
When a preset program is selected, the Distance/
Time display will show the distance you have hiked,
the time remaining in the program, and the time
remaining in the current segment of the program.
Insert the key fully into the console.
1
See GETTING STARTED on page 10.
Pulse display—This
display will show your
heart rate when the op-
tional heart rate moni-
tor is worn. (For infor-
Select the desired preset program.
2
When the key is inserted, the manual mode will be
selected. To select one of the five moderate
programs, press the Moderate button repeatedly;
to select a challenging program, press the
Challenging button repeatedly; to select an extreme
program, press
mation about the op-
tional heart rate monitor, see page 19.)
To reset the displays, press the Stop button, re-
move the key, and then re-insert the key.
the Extreme
button repeat-
edly. The
Trail
Display
When you are finished exercising, stop the
walking belt and remove the key.
fifteen trails
shown in the
trail display
represent the
fifteen preset
programs. As
you press the Moderate, Challenging, or Extreme
button repeatedly, indicators will light in the trail
display to show which trail you have selected.
6
Step onto the foot rails and press the Stop button.
Next, remove the key from the console and put it in
a secure place. Note: If the displays and indica-
tors on the console remain lit after the key is
removed, the console is in the “demo” mode.
Refer to page 19 and turn off the demo mode.
When you are finished using the TREKKER, move
the on/off switch near the power cord to the off po-
sition and unplug the power cord.
When a preset program is selected, the matrix will
show the grade settings for the program. (For the
longest programs, the matrix will not show all of
the grade settings at once.) In addition, the Speed
display will show the maximum speed setting for
the program and the Vertical Feet/Cals./Grade
display will show the maximum grade setting for
the program.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If the grade or speed setting for the current
segment is too high or too low, you can manually
override the setting by pressing the Grade or
Speed buttons on the console. Every few times
one of the Grade buttons is pressed, an additional
indicator will light or darken in the Current Segment
column of the matrix. Important: If you manually
override the grade or speed setting for the cur-
rent segment, when the segment ends the
TREKKER will automatically adjust to the grade
and speed settings for the next segment. Note:
Because each program is based on a preset dis-
tance, if you manually increase the speed, the
time remaining in the current segment and the
time remaining in the program will decrease; if you
manually decrease the speed, the time remaining
in the current segment and the time remaining in
the program will increase.
Press the Start button or the Speed + button to
start the program.
3
A moment after the button is pressed, the
TREKKER will automatically adjust to the first
grade and speed settings for the program. Hold
the handrails and begin walking.
Each program is divided into several time seg-
ments of different lengths. The Distance/Time dis-
play shows both the time remaining in the program
and the time remaining in the current segment of
the program. One grade setting and one speed
setting are programmed for each segment. The
grade setting for
the first segment
Current Segment Column
is shown in the
flashing Current
Segment column
of the matrix.
To stop the program temporarily, press the Stop
button. The displays will pause and the Distance/
Time display will begin to flash. To restart the pro-
gram, press the Start button or the Speed + button.
To end the program, press the Stop button, remove
the key, and then re-insert the key. Pressing the
Moderate, Challenging, or Extreme button will also
end the program and will select the next preset
program or the manual mode.
(The speed set-
tings are not
shown in the ma-
trix.) The grade
settings for upcoming segments are shown in the
columns to the right.
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash and a
series of tones will sound. In addition, the Speed
display will flash three times if the speed is about
to change, and the Vertical Feet/Cals./Grade dis-
play will flash if the grade is about to change.
When the first segment is completed, all grade set-
tings in the matrix will move one column to the left.
The grade setting for the second segment will
then be shown in the flashing Current Segment
column and the TREKKER will automatically adjust
to the grade and speed settings for the second
segment.
Follow your progress with the displays.
4
5
See step 5 on page 11.
When the program is completed, remove the
key.
Step onto the foot rails and remove the key from
the console. Make sure to keep the key in a secure
place. Note: If the displays and indicators on
the console remain lit after the key is removed,
the console is in the “demo” mode. Refer to
page 19 and turn off the demo mode.
The program will continue until the grade setting
for the last segment is shown in the Current
Segment column of the matrix and no time re-
mains in the program. The walking belt will then
slow to a stop.
When you are finished using the TREKKER, move
the on/off switch near the power cord to the off po-
sition and unplug the power cord.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE TREKKER TO YOUR
CD PLAYER, VCR, OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CD’s, the TREKKER must be con-
nected to your portable CD player, portable stereo, home
stereo, or computer with CD player. See this page and
page 15 for connecting instructions. To use iFIT.com
videocassettes, the TREKKER must be connected to
your VCR. See page 16 for connecting instructions. To
use iFIT.com programs directly from our internet
site, the TREKKER must be connected to your home
computer. See page 15 for connecting instructions.
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER
AUDIO OUT
RIGHT
LEFT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Audio
Cable
Adapter
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
LINE OUT
PHONES
B
LINE OUT
Head-
phones
Audio
Cable
Audio
Cable
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
C. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
B
PHONES
C
PHONES
3.5mm
Y-adapter
PHONES
Audio
Cable
3.5mm
Y-adapter
Audio
Cable
Headphones
Headphones
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into the LINE OUT jack on your stereo.
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
CD
VCR
LINE OUT
Amp
LINE OUT
LINE OUT
Audio
Cable
Audio
Cable
Adapter
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
B
PHONES
B
CD
Audio
Cable
3.5mm
Y-adapter
VCR
Amp
LINE OUT
Headphones/Speakers
RCA
Y-adapter
Audio
Adapter
Cable
Wire removed from
LINE OUT jack
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 15.
To use iFIT.com CD’s or videocassettes, the
TREKKER must be connected to your portable CD
player, portable stereo, home stereo, computer with
CD player, or VCR. See HOW TO CONNECT THE
TREKKER TO YOUR CD PLAYER, VCR, OR COM-
PUTER on page 14. Note: To purchase iFIT.com
CD’s or videocassettes, call toll-free 1-800-735-
0768.
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into the AUDIO OUT jack on your VCR.
Follow the steps below to use an iFIT.com CD or video
program.
A
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
Insert the key fully into the console.
AUDIO OUT
1
RIGHT
LEFT
See GETTING STARTED on page 10.
Audio
Cable
Adapter
Select the iFIT.com mode.
2
When the key is in-
serted, the manual
mode will be selected.
To use an iFIT.com CD
or video program, press
the iFIT.com button. The
indicator on the button will light.
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD into
your CD player. If you are using an iFIT.com video-
cassette, insert the videocassette into your VCR.
Press the PLAY button on your CD player or
VCR.
B
4
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
A moment after the button is pressed, your per-
sonal trainer will begin guiding you through the
program. Simply follow your personal trainer’s
instructions. Note: If the Distance/Time display is
flashing, press the Start button or the Speed +
button on the console. The TREKKER will not re-
spond to a CD or video program when the display
is flashing.
RCA Adapter
Adapter
Audio
Cable
Wire removed from
AUDIO OUT jack
During the CD or video program, an electronic
“chirping” sound will alert you when the grade
and/or speed of the TREKKER is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for grade and/or speed changes. In
some instances, the grade and/or speed may
change before the personal trainer describes
the change.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If the grade or speed settings are too high or too
low, you can manually override the settings at any
time by pressing the Grade or Speed buttons on
the console. However, when the next “chirp” is
heard, the speed and/or grade will change to
the next settings of the CD or video program.
• make sure that the indicator on the iFIT.com
button is lit and that the Distance/Time dis-
play is not flashing. If the display is flashing,
press the Start button or the Speed + button
on the console.
• adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals.
To stop the walking belt at any time, press the
Stop button on the console. The Distance/Time
display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the grade
and speed will change to the next settings of
the CD or video program. Pressing the Stop but-
ton on your CD player or VCR will also stop the
program.
• make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
• if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
Follow your progress with the displays.
5
6
When the CD or video program is completed, the
walking belt will stop and the Distance/Time display
will begin to flash. Note: To use another CD or
video program, press the Stop button or remove
the key and go to step 1 on page 16.
See step 5 on page 11.
When the program is completed, remove the
key.
Note: If the grade or speed of the TREKKER
does not change when a “chirp” is heard:
See step 6 on page 12.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to the TREKKER and stand on the foot
rails. Find the clip attached to the key and slide
the clip onto the waistband of your clothing.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR INTERNET SITE
7
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
“chirping” sound will alert you when the grade
and/or speed of the TREKKER is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for grade and/or speed changes.
access a selection of programs that interactively con-
trol your TREKKER to help you achieve your specific
exercise goals. In addition, you can play iFIT.com
audio and video programs directly from the internet. By
adding an optional upgrade module to the console, you
can use virtually endless features from our internet site.
Explore www.iFIT.com for details. To purchase an up-
grade module, see page 19.
If the grade or speed settings are too high or too
low, you can manually override the settings at any
time by pressing the Grade or Speed buttons on
the console. However, when the next “chirp” is
heard, the grade and/or speed will change to
the next settings of the program.
To use programs from our internet site, the TREKKER
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 15. In
addition, you must have an internet connection and
an internet service provider. A list of specific system
requirements will be found on our internet site.
To stop the walking belt at any time, press the
Stop button on the console. The Distance/Time
display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the grade
and speed will change to the next settings of
the program.
Follow the steps below to use a program from our
internet site.
Insert the key fully into the console.
1
See GETTING STARTED on page 10.
Select the iFIT.com mode.
When the program is completed, the walking belt
will stop and the Distance/Time display will begin
to flash. Note: To use another program, press the
Stop button and go to step 5.
2
When the key is inserted, the manual mode will be
selected. To use a program from our internet site,
press the iFIT.com button. The indicator on the but-
ton will light.
Note: If the grade or speed of the TREKKER
does not change when a “chirp” is heard, make
sure that the indicator on the iFIT.com button is
lit and that the Distance/Time display is not
flashing. In addition, make sure that the audio
cable is properly connected, that it is fully
plugged in, and that it is not wrapped around a
power cord.
Go to your computer and start an internet
connection.
3
Start your web browser, if necessary, and go to
4
Follow the links on our internet site to select a
program.
5
Follow your progress with the displays.
8
9
Read and follow the on-line instructions for using a
program.
See step 5 on page 11.
When the program is completed, remove the
key.
Follow the on-line instructions to start the
program.
6
See step 6 on page 12.
When you start the program, an on-screen count-
down will begin.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INFORMATION MODE/DEMO MODE
THE OPTIONAL IFIT.COM MODULE
The console features an information mode that keeps
track of the total number of hours that the TREKKER
has been operated and the total number of miles that
the walking belt has moved. The information mode
also allows you to switch the console from miles to
kilometers. In addition, the information mode allows
you to turn on and turn off the demo mode.
By adding an optional
iFIT.com module to the
TREKKER, you can use
virtually endless features
from our internet site.
Imagine on-line competi-
tions, personal training
sessions via the internet,
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the console will show
the following information:
and the ability to use your computer to track your pro-
grams. For information about purchasing the op-
tional iFIT.com module, call toll-free 1-800-735-0768.
THE OPTIONAL HEART RATE MONITOR
An “E” for English miles or
an “M” for metric kilometers
will appear in the Speed dis-
play. Press the Speed + but-
ton to change the unit of
measurement.
An optional heart rate monitor adds even more
features to the console. The heart rate monitor provides
hands-free operation and continuously monitors your
heart rate during your workouts. To purchase the
optional heart rate monitor, call toll-free 1-888-825-
2588.
The Vertical Feet/Cals./
Grade display will show the
total number of miles that
the walking belt has moved.
The Distance/Time display
will show the total number of
hours that the TREKKER
has been used.
IMPORTANT: Make sure
that there is not a letter
“d” in the Heart Rate dis-
play. If a “d” appears in the
display, the console is in the
“demo” mode. This mode is
intended to be used only when a TREKKER is dis-
played in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the displays and in-
dicators on the console will automatically light in a pre-
set sequence, although the buttons on the console will
not operate. If a “d” appears in the Heart Rate display
when the information mode is selected, press the
Speed - button so the display is blank.
To exit the information mode, remove the key from the
console.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Move the TREKKER
Before moving the TREKKER, change the grade of the TREKKER to the lowest level and unplug the
power cord.
1. Hold the handrails as shown and place one foot against the
walking belt.
2. Tilt the TREKKER back until it rolls freely on the wheels. The
help of a second person may be helpful when tipping the
TREKKER. Carefully move the TREKKER to the desired lo-
cation. Never move the TREKKER without tipping it
back. To reduce the risk of injury, use extreme caution
while moving the TREKKER. Do not attempt to move
the TREKKER over an uneven surface.
3. Place one foot on the walking belt, and carefully lower the
TREKKER until it is resting on the floor.
Wheels
Trouble-shooting
Most problems can be solved by following the steps below. Find the symptom that applies, and follow the
steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-888-825-
2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppres-
sor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.
Important: The TREKKER is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the TREKKER
c
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
Reset
Tripped
d
d. Check the on/off switch located on the TREKKER
near the power cord. The switch must be in the on
position.
On
Position
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the TREKKER near the power cord (see c. on page 20). If
the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Re-insert the key fully into the console.
d. Make sure that the on/off switch is in the “on” position.
e. If the TREKKER still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The key is inserted and the displays on the console are lit, but the walking belt will not start
SOLUTION: a. Unplug the power cord, wait for five minutes, and then plug the power cord back in.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG THE
a
118
14
POWER CORD. Remove the two indicated Screws
(118) from the Belly Pan (16). Loosen the other indi-
cated Screw three turns. Carefully lift the Front Roller
Cover (14).
Loosen
three
turns
16
118
13
b. Locate the Reed Switch (87) and the Magnet (13) on
the side of the Pulley (11). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8”. If necessary, loosen the Screw
(43) and move the Reed Switch slightly. Retighten the
Screw. Re-attach the front roller cover, and run the
TREKKER for a few minutes to check for a correct
speed reading.
b
1/8”
87
43
Top
View
11
PROBLEM: The grade of the TREKKER does not change correctly or does not change when iFIT.com
CD’s and videocassettes are played
SOLUTION: a. With the key in the console, press one of the Grade buttons. While the grade is changing, re-
move the key. After a few seconds, re-insert the key. The TREKKER will automatically rise to the
highest grade and then return to the lowest grade. This will recalibrate the TREKKER.
b. If an “E6” appears in the Distance/Time display, remove the key and unplug the power cord. Wait
for sixty seconds, plug in the power cord, and re-insert the key.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in
length.
b. If the walking belt is overtightened, TREKKER perfor-
b
mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
2”–3”
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is correctly tightened, you
should be able to lift each side of the walking belt 2 to
3 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
Rear Roller
sert the key and carefully walk on the TREKKER for a
Adjustment Bolts
few minutes. Repeat until the walking belt is properly
tightened.
c. If the walking belt still slows, please call our Customer Service Department, toll-free.
PROBLEM: The walking belt is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove
a
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt clock-
wise, and the right bolt counterclockwise, 1/4 of a turn
each. Be careful not to overtighten the walking belt. Plug in
the power cord, insert the key and run the TREKKER for a
few minutes. Repeat until the walking belt is centered.
b. If the walking belt has shifted to the right, first remove
b
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt coun-
terclockwise, and the right bolt clockwise, 1/4 of a turn
each. Be careful not to overtighten the walking belt. Plug
in the power cord, insert the key and run the TREKKER for
a few minutes. Repeat until the walking belt is centered.
PROBLEM: The walking belt slips when walked on
SOLUTION: a. If the walking belt slips when walked on, first remove the
a
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment bolts clockwise,
1/4 of a turn. When the walking belt is correctly tightened,
you should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep the
walking belt centered. Plug in the power cord, insert the
key and carefully walk on the TREKKER for a few min-
utes. Repeat until the walking belt is properly tightened.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Conditioning Guidelines
Aerobic Exercise
WARNING:
Before beginning this
If your goal is to strengthen your cardiovascular system,
your exercise must be “aerobic.” Aerobic exercise is ac-
tivity that requires large amounts of oxygen for prolonged
periods of time. This increases the demand on the heart
to pump blood to the muscles, and on the lungs to oxy-
genate the blood. For aerobic exercise, adjust the grade
and speed of the TREKKER until your heart rate is near
the highest number in your training zone.
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
The following guidelines will help you to plan your ex-
ercise program. Remember—these are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, stop exer-
EXERCISE INTENSITY
cising and place two
fingers on your wrist
as shown. Take a six-
second heartbeat
count, and multiply
the result by ten to
find your heart rate. (A
six-second count is used because your heart rate
drops quickly when you stop exercising.)
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning and aerobic exercise.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your “train-
ing zone.” The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
PROGRAM GUIDELINES
Each program should include the following three parts:
A Warm-up—Start each program with 5 to 10 minutes
of stretching and light exercise. A proper warm-up in-
creases your body temperature, heart rate and circula-
tion in preparation for exercise.
Training Zone Exercise—After warming up, increase
the intensity of your exercise until your heart rate is in
your training zone for 20 to 60 minutes. (During the
first few weeks of your exercise program, do not keep
your heart rate in your training zone for longer than 20
minutes.) Breathe regularly and deeply as you exercise.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the grade and speed of the
TREKKER until your heart rate is near the lowest num-
ber in your training zone.
A Cool-down—Finish each program with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-ex-
ercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
programs each week, with at least one day of rest be-
tween programs. After a few months, you may com-
plete up to five programs each week if desired. The
key to success is to make exercise a regular and en-
joyable part of your everyday life.
For maximum fat burning, adjust the grade and speed
of the TREKKER until your heart rate is near the mid-
dle number in your training zone.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVE THIS EXPLODED DRAWING AND
PART LIST FROM THE MANUAL
Save this EXPLODED DRAWING and PART LIST for future reference.
34
Note: Specifications are subject to change without notice. For information about
ordering replacement parts, see the back cover of the User’s Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part List—Model No. NTHK99901
R0700A
Key
Key
Key
No. Qty. Description
No. Qty. Description
No. Qty. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19*
1
1
1
4
2
Left Foot Rail Insert
Left Foot Rail
Motor Belt
Platform Screw
Belt Guide
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77*
78
79
80
81
82
83
84
85
86
87
88
89
90
1
1
1
2
4
1
1
1
4
1
1
4
1
1
2
1
4
2
2
3
3
2
4
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
4
14” Controller Wire
iFIT.com Connector
iFIT.com Wire
Handrail Cover
Upright Collar
10’ iFIT.com Audio Cable 101 1
iFIT.com Jack
iFIT.com Wire
Electronics Screw
Resistor
Electronics Bracket
Plastic Stand-off
Power Board
Controller
Frame Pivot Bolt
Allen Wrench
Frame Bushing
Warning Decal
Base Endcap
Roller Adj. Bolt
Roller Adj. Washer
Frame Endcap
Isolator
Flywheel Washer
Motor Pivot Bolt
Motor
Pulley/Flywheel/Fan
Motor/Pulley/Flywheel/Fan
30” Extension Wire
Motor Tension Bolt
Grommet
96
97
98
99
1
1
1
1
Console Base (Bottom)
Book Holder
Cup Holder/Tray
Console
Upright Wire Harness
Base
6” Audio Wire
Rear Roller
Incline Motor
Wheel Spacer
Resistor Bracket
32” Wire Harness
Endcap Spacer
Ground Wire Screw
Ground Wire
Motor Bushing
Motor Spacer
Handrail Endcap
Metal Spacer
100 1
12 Small Screw
1
2
5
1
1
1
1
1
9
1
1
1
1
Walking Platform
Roller Guard
102 1
103 1
104 1
105 4
106 2
107 1
108 3
109 1
110 1
111 2
112 4
113 2
114 2
115 1
116 3
117 4
118 3
#
#
#
#
#
#
#
#
#
#
Resistor Screw
Walking Belt
Drive Roller/Pulley
Motor Pivot Sleeve
Magnet
Front Roller Cover
Belly Pan Screw
Belly Pan
Right Foot Rail Insert
Right Foot Rail
Chest Pulse
iFIT.com Module
iFIT.com Videocassette
iFIT.com CD
Upright
Key/Clip
Handrail Bolt
Handrail Star Washer
Handrail
Flywheel Screw
Screw
Handrail Wire Harness
Cup Holder Flange
Upright Washer
Upright Bolt
Wheel
Wheel Bolt
Wheel Nut
Power Cord
20** 1
21** 1
22** 1
Roller Cover Plate
Cover Clip
Bracket Washer
Roller Cover Screw
14” Blue Wire, M/F
8” Blue Wire, F/Flag
4” Blue Wire
8” Green Wire, F/Ring
6” Green Wire, 2 Ring
4” Green Wire, F/Ring
8” Red Wire, 2F
10” Red Wire, 2F
10” White Wire, 2F
User's Manual
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
2
1
4
4
1
1
6
1
1
6
6
2
2
2
1
1
1
2
1
5
1
1
1
1
1
1
1
1
1
1
Motor Star Washer
Motor Tension Nut
Static Decal
Plastic Plate
* Includes all parts shown in the box
Reed Switch Clip
Upright Endcap
Reed Switch/Wire
Frame
Incline Motor Bolt (Short)
Incline Motor Nut/Frame
Pivot Nut
**These parts are optional. For infor-
mation about the iFIT.com module,
iFIT.com CD’s, or iFIT.com video-
cassettes, call toll-free 1-800-735-
0768.
Power Cord Grommet
Circuit Breaker
Frame Pivot Spacer
Base Wire Harness
Base Pad
43 20 Screw
91
92
93
1
1
1
Rear Endcap (Right)
Incline Motor Insert
Incline Motor Cover
(Bottom)
Incline Motor Cover
(Top)
# These parts are not illustrated
44
45
46
47
48
49
1
1
1
1
1
1
Releasable Tie
Tie Screw
Tie Holder
8” Cable Tie
On/Off Switch
Outlet Cover
94
95
1
1
Incline Motor Bolt (Long)
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploded Drawing—Model No. NTHK99901
R0700A
.
G R O U P
L I T
K i r k N P i R
e
O b D e U r g C T l l
a
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Replacement Parts
To order replacement parts, call our Customer Service Department toll-free at 1-888-825-2588, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:
• The MODEL NUMBER OF THE PRODUCT (NTHK99901)
• The NAME OF THE PRODUCT (NordicTrack® ADVENTURER TREKKERTM)
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the accompanying PART LIST and EXPLODED
DRAWING).
If possible, place the TREKKER near your telephone for easy reference when calling.
NordicTrack is a registered trademark of ICON Health & Fitness, Inc.
Limited Warranty
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service
centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of pur-
chase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center, to products used for commercial or
rental purposes, or to products used as store display models. No other warranty beyond that specifically
set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 165686 R0700A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|