Nokia Headphones 3555c User Manual

Nokia 3555 User Guide

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

Export controls

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using

your telephone if such interference cannot be eliminated. If you require assistance, contact

your local service facility. This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may

cause undesired operation. Any changes or modifications not expressly approved by Nokia

could void the user's authority to operate this equipment.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C o n t e n t s

Contents

For your safety....................................................................................................... 5

General information............................................................................................. 8

1. Get started......................................................................................................... 9

2. Your device....................................................................................................... 16

3. Call functions.................................................................................................. 21

4. Write text......................................................................................................... 23

5. Messaging ........................................................................................................ 25

6. Contacts............................................................................................................ 38

7. Log...................................................................................................................... 41

8. Settings............................................................................................................ 41

9. Gallery ............................................................................................................... 52

10.Media................................................................................................................ 54

11.Organizer......................................................................................................... 57

12.Push to talk..................................................................................................... 60

13.Applications.................................................................................................... 66

14.SIM services.................................................................................................... 67

15.Web................................................................................................................... 67

16.PC connectivity.............................................................................................. 73

17.Battery information...................................................................................... 74

Care and maintenance ...................................................................................... 78

Additional safety information......................................................................... 79

Index....................................................................................................................... 84

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

F o r y o u r s a f e t y

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless device use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the

vehicle while driving. Your first consideration while driving should be

road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical

equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELLING

Do not use the device at a refuelling point. Do not use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in

progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

F o r y o u r s a f e t y

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information stored in your device.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the device is switched on and in service. Press the end key as

many times as needed to clear the display and return to the start

screen. Enter the emergency number, then press the call key. Give

your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the WCDMA

850 and 1900, and GSM 850, 900, 1800, and 1900 networks. Contact your

service provider for more information about networks.

When using the features in this device, obey all laws and respect the privacy and

legitimate rights of others.

When taking and using images or video clips, obey all laws and respect local

customs as well as privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless device use may cause interference or danger.

■ Network services

To use the device you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to

function. These network services may not be available on all networks or you may

have to make specific arrangements with your service provider before you can

utilize network services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks

may have limitations that affect how you can use network services. For instance,

some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Your

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

F o r y o u r s a f e t y

device may also have been specially configured for your network provider. This

configuration may include changes in menu names, menu order and icons.

Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

protocols. Some features of this device, such as multimedia messaging (MMS),

browsing, e-mail application, instant messaging, presence enhanced contacts,

remote synchronization, and content downloading using the browser or MMS,

require network support for these technologies.

■ Shared memory

The following features in this device may share memory: gallery, contacts, text

messages, multimedia messages, and instant messages, e-mail, calendar, to-do

notes, Java^TMgames and applications, and note application. Use of one or more of

these features may reduce the memory available for the remaining features

sharing memory. For example, saving many Java applications may use all of the

available memory. Your device may display a message that the memory is full

when you try to use a shared memory feature. In this case, delete some of the

information or entries stored in the shared memory features before continuing.

Some of the features, such as text messages, may have a certain amount of

memory specially allotted to them in addition to the memory shared with other

features.

■ Enhancements

A few practical rules about accessories and enhancements

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and

are operating properly.

Installation of any complex car enhancements must be made by qualified

personnel only.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e n e r a l i n f o r m a t i o n

General information

■ Overview of functions

Your device provides many functions that are practical for daily use, such as text

and multimedia messaging, calendar, clock, alarm clock, music player, and built-

in camera. Your device also supports the following functions:

•

Plug and play online service to get the configuration settings. See Plug and

play service p. 14 and Configuration settings service p. 8.

•

Active standby. See Active standby p. 18.

Audio messaging. See Nokia Xpress audio messaging p. 28.

Instant messaging. See Instant messaging p. 31.

E-mail application. See E-mail application p. 29.

Enhanced voice dialing. See Enhanced voice dialing p. 22 and Voice

commands p. 43.

•

Java 2 Platform, Micro Edition (J2ME^TM). See Applications p. 66.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS,

Nokia Xpress audio messaging, or remote Internet server synchronization, your

device needs the correct configuration settings. For more information on

availability, contact your network operator, service provider, nearest authorized

Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/

support.

When you have received the settings as a configuration message, and the

settings are not automatically saved and activated, Configuration sett. received

%U is displayed.

To save the settings, select Show > Save. If required, enter the PIN code supplied

by the service provider.

To discard the received settings, select Exit or Show > Discard.

■ Download content

You may be able to download new content (for example, themes) to the device

(network service).

For the availability of different services and pricing, contact your service provider.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Important: Use only services that you trust and that offer adequate

security and protection against harmful software.

■ Nokia support

Check www.nokia.com/support or your local Nokia website for the latest version

of this guide, additional information, downloads, and services related to your

Nokia product.

On the website, you can get information on the use of Nokia products and

services. If you need to contact customer service, check the list of local Nokia

Care contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at

www.nokia.com/repair.

1. Get started

■ Install SIM card and battery

Always switch the device off and disconnect the charger before removing the

battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM

card vendor. This may be the service provider, network operator, or other vendor.

This device is intended for use with BL-5C battery. Always use original Nokia

batteries. See Nokia battery authentication p. 75.

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting, or removing the card.

To remove the back cover of the

device, press sightly (1) and slide

the cover (2).

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Remove the battery as shown.

To open the SIM card holder,

press slightly (1) and lift the

holder (2).

Insert the SIM card properly into

the holder.

Close the SIM card holder.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Replace the battery.

Replace the back cover (1).

Slide the back cover into its

place (2).

■ Insert a microSD card

Keep all microSD memory cards out of the reach of small children.

A microSD card can be loaded with ringing tones, themes,

tones, images and videos. If you delete, reload, or replace this

card, these functions and features may not function properly.

Use only compatible microSD cards with this device. Other memory cards, such as

Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not

compatible with this device. Using an incompatible memory card may damage

the memory card as well as the device, and data stored on the incompatible card

may be corrupted.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes

the approved industry standards for memory cards but not all other brands may

function correctly or be fully compatible with this device.

Important: Do not remove a microSD card in the middle of an operation

when the card is being accessed. Removing the card in the middle of an

operation may damage the memory card as well as the device, and data

stored on the card may be corrupted.

1. Remove the back

cover and the

battery of the

device. Slide the

microSD memory

card holder down

(1) and flip the card

holder up (2).

2. Insert the card into

the memory card

holder with the

gold-colored

contact area facing

up (3).

3. Close the card

holder (4 and 5),

reinsert the battery

and slide the back

cover back in place.

■ Charge the battery

Check the model number of any charger before use with this device. This device is

intended for use when supplied with power from an AC-3, AC-4, or AC-5 charger.

Warning: Use only batteries, chargers, and enhancements approved by

Nokia for use with this particular model. The use of any other types may

invalidate any approval or warranty, and may be dangerous.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

For availability of approved enhancements, please check with your dealer. When

you disconnect the power cord of any enhancement, grasp and pull the plug, not

the cord.

1. Connect the charger to a wall

socket.

2. Connect the charger to your

device.

A CA-44 charging adapter can

be used with older charger

models.

If the battery is completely

discharged, it may take a few minutes before the charging indicator appears on

the display or before any calls can be made.

The charging time depends on the charger used. Charging a BL-5C battery with

the AC-3 charger takes approximately 2 hours and 20 mi n utes while the device is

in the standby mode.

■ Open and close the device

You open and close the device manually. When you open the fold of the device, it

opens up to approximately 165 degrees. Do not try to force the fold open more.

Depending on the Theme a tone sounds when you open and close the device.

■ Switch the device on and off

Warning: Do not switch the device on

when wireless device use is prohibited or

when it may cause interference or

danger.

To switch the device on or off, press and hold the

power key. See Keys and parts p. 16.

If the device asks for a PIN or a UPIN code, enter

the code (displayed as ****), and select OK.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time

difference with respect to Greenwich Mean Time (GMT), and enter the date. See

Time and date p. 43.

Plug and play service

When you switch on your device for the first time, and the device is in the

standby mode, you are asked to get the configuration settings from your service

provider (network service). Confirm or decline the query. See Configuration

settings service p. 8.

■ Connect a headset

You can connect an HS-47

headset to your device.

Connect the headset to the

device as shown.

■ Antenna

Your device has an internal antenna located at the bottom of

the device. Avoid contact with the antenna area.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G e t s t a r t e d

Note: As with any other radio transmitting

device, do not touch the antenna

unnecessarily when the device is switched on.

Contact with the antenna affects call quality

and may cause the device to operate at a

higher power level than otherwise needed.

Avoiding contact with the antenna area when

operating the device optimizes the antenna

performance and the battery life.

■ Device strap

Remove the back cover of the device.

Insert a thread through the eyelet.

Place the thread around the post of

the device as shown in the picture.

Tighten the thread. Put the back

cover back in place.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Y o u r d e v i c e

2. Your device

■ Keys and parts

1) Earpiece

9) Camera key

2) Camera

3) Main display

4) Mini display

5) Navi^TMkey (scroll key)

6) Right selection key

7) End key and power key

8) Keypad

10) Volume and PTT key

11) Micro USB connector

12) Charger connector

13) Call key

14) Left selection key

15) Headset connector

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Y o u r d e v i c e

■ Navigate the menus

The device offers you an extensive range of functions, which are grouped into

menus.

1. To access the menu, select Menu.

To change the menu view, select Options > Main menu view > List or Grid.

To rearrange the menu, scroll to the menu you want to move, and select

Options > Organize > Move. Scroll to where you want to move the menu,

and select OK. To save the change, select Done > Yes.

2. Scroll through the menu, and select an option (for example, Settings).

3. If the selected menu contains further submenus, select the one you want (for

example, Call).

4. If the selected menu contains further submenus, repeat step 3.

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select

Exit.

■ Standby mode

When the device is ready for use, and you have not entered any characters, the

device is in the standby mode.

Mini display

1 Network mode indicator

2 Signal strength of the cellular network

3 Battery charge status

4 Indicators

5 Network name or the operator logo

6 Clock and date or profile

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Y o u r d e v i c e

Main display

1 Network mode indicator

2 Signal strength of the cellular network

3 Battery charge status

4 Indicators

5 Network name or the operator logo

6 Clock

7 Main display

8 The left selection key is Go to or a shortcut to

another function. See My shortcuts p. 43.

9 The middle selection key mode is Menu.

10 The right selection key may be Names to access the list of contacts in the

Contacts menu, an operator-specific name to access an operator-specific

website, or a shortcut to a function that you selected. See My shortcuts p. 43.

Active standby

In the active standby mode there is a list of selected device features and

information on the screen that you can directly access in the standby mode. To

switch on or off the mode, select Menu > Settings > Main display > Active

standby > Active standby mode > On or Off.

In the active standby mode, scroll up or down to navigate the list. Left and right

arrows at the beginning and end of a line indicate that further information is

available by scrolling left or right. To end the active standby navigation mode,

select Exit.

To organize and change the active standby mode, activate the navigation mode,

and select Options > Personalize view.

Indicators

You have unread messages.

You have unsent, canceled or failed messages.

The device registered a missed call.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Y o u r d e v i c e

Your device is connected to the instant messaging service, and the

availability status is online or offline.

You received one or several instant messages.

The keypad is locked.

The device does not ring for an incoming call or text message.

The alarm clock is activated.

The countdown timer is running.

The stopwatch is running.

The device is registered to the GPRS or EGPRS network.

A GPRS or EGPRS connection is established.

The GPRS or EGPRS connection is suspended (on hold).

A Bluetooth connection is active.

Push-to-talk connection is active or suspended.

If you have two phone lines, the second phone line is selected.

All incoming calls are forwarded to another number.

The loudspeaker is activated, or the music stand is connected to the

device.

Calls are limited to a closed user group.

The timed profile is selected.

, or

A headset, handsfree, loopset, or music stand enhancement is

connected to the device.

■ Flight mode

You can deactivate all radio frequency functions and still have access to offline

games, calendar, and phone numbers. Use the flight mode in radio sensitive

environments—on board aircraft or in hospitals. When the flight mode is active,

is shown.

Select Menu > Settings > Profiles > Flight > Activate or Customize.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Y o u r d e v i c e

To deactivate the flight mode, select any other profile.

In the flight mode you can make an emergency call. Enter the emergency number,

press the call key, and select Yes when asked Exit flight profile? The device

attempts to make an emergency call.

When the emergency call ends, the device automatically changes to the general

profile mode.

■ Keypad lock (keyguard)

Select Menu or Unlock (1), and press * (2) within

1.5 seconds to lock or unlock the keypad.

If the security keyguard is activated, enter the

security code if requested.

To answer a call when the keyguard is on, press the

call key or open the device. When you end or reject

the call, the keypad automatically locks.

For Security keyguard, see Phone p. 48.

When the keyguard is on, calls still may be possible

to the official emergency number programmed into

your device.

■ Functions without a SIM card

Several functions of your device may be used without installing a SIM card (for

example, the data transfer with a compatible PC or another compatible device).

Without a SIM card, some functions appear dimmed in the menus and cannot be

used.

For an emergency call, some networks may require that a valid SIM card is

properly inserted in the device.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your device against

unauthorized use. The preset code is 12345. To change the code, and to set the

device to request the code, see Security p. 50.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C a l l f u n c t i o n s

PIN codes

The personal identification number (PIN) code and the universal personal

identification number (UPIN) code (4 to 8 digits) help to protect your SIM card

against unauthorized use. See Security p. 50.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required

for some functions.

The module PIN is required to access the information in the security module. See

Security module p. 72.

The signing PIN is required for the digital signature. See Digital signature p. 72.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking

key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN

code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2

code. If the codes are not supplied with the SIM card, contact your local service

provider for the codes.

Restriction password

The restriction password (4 digits) is required when using the Call restrictions.

See Security p. 50.

3. Call functions

■ Make a voice call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the +

character replaces the international access code), enter the country code, the

area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

To increase the volume in a call, press the volume up key and to decrease

press the volume down key.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C a l l f u n c t i o n s

3. To end the call or to cancel the call attempt, press the end key, or close the

device.

To search for a name or phone number that you have saved in Contacts, see

Search for a contact p. 38.

To access the list of dialed numbers, press the call key once in the standby mode.

To call the number, select a number or name, and press the call key.

1-touch dialing

Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See 1-touch

dialing p. 40. Call the number in either of the following ways:

•

Press a speed-dialing key, then the call key.

If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the

call begins. See 1-touch dialing in Call p. 48.

Enhanced voice dialing

To make a call you can say the name saved in the contact list of the device. Voice

commands are language-dependent. To set the language, see Voice recognition

language in Phone p. 48.

Note: Using voice tags may be difficult in a noisy environment or

during an emergency, so you should not rely solely upon voice dialing in

all circumstances.

1. To make a call using voice dialing, in the standby mode, press and hold the

volume down key. A short tone is played, and Speak now is displayed.

2. Say the voice command clearly. If the voice recognition was successful, a list

with matches is shown. The device plays the voice command of the match on

the top of the list. If the result is not the correct one, scroll to another entry.

Using voice commands to carry out a selected device function is similar to

voice dialing. See Voice commands in My shortcuts p. 43.

■ Answer or decline a call

To answer an incoming call, press the call key, or open the device. To end the call,

press the end key or close the device.

To decline an incoming call, press the end key or close the device. To reject an

incoming call when the device is closed, press and hold a volume key.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W r i t e t e x t

To mute the ringing tone, press a volume key when the device is closed, or select

Silence when the device is open.

Call waiting

To answer the waiting call during an active call, press the call key. The first call is

put on hold. To end the active call, press the end key.

To activate the Call waiting function, see Call p. 48.

■ Options during a voice call

Many of the options that you can use during a call are network services. For

availability, contact your service provider.

During a call, select Options and from the following: Mute or Unmute, Contacts,

Menu, Lock keypad, Record, Loudspeaker or Handset.

Network services options are Answer or Decline, Hold or Unhold, New call, Add to

conference, End call, End all calls, and the following:

Touch tones — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer calls — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call of up to five persons

Private call —to discuss privately in a conference call

Warning: Do not hold the device near your ear when the loudspeaker

is in use, because the volume may be extremely loud.

4. Write text

You can enter text (for example, when writing messages) using traditional or

predictive text input. When you write text, text input indicators appear at the top

of the display.

indicates traditional text input.

indicates predictive

text input. Predictive text input allows you to write text quickly using the device

keypad and a built-in dictionary. You can enter a letter with a single keypress.

indicates predictive text input with Word suggestions. The device predicts

and completes the word before you enter all the characters.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W r i t e t e x t

, or

appears next to the text input indicator, indicating the character

case. To change the character case, press #.

indicates number mode. To change from the letter to number mode, press

and hold #, and select Number mode.

To set the writing language while writing text, select Options > Writing

language.

■ Predictive text input

To set predictive text input on, select Options > Prediction option > Prediction >

On.

Tip: To quickly set predictive text input on or off when writing text, press

# twice, or select and hold Options.

To select the prediction input type, select Options > Prediction option >

Prediction type > Normal or Word sugg.

1. Start writing a word using the 2 to 9 keys. Press each key only once for one

letter. The entered letters are displayed underlined.

If you selected Word suggestions as prediction type, the device starts to

predict the word you are writing. After you enter a few letters, and if these

entered letters are not a word, the device tries to predict longer words. Only

the entered letters are displayed underlined.

To insert a special character, press and hold *, or select Options > Insert

symbol. Scroll to a character, and select Insert.

To write compound words, enter the first part of the word; to confirm it, press

the scroll key right. Write the next part of the word and confirm the word.

To enter a full stop, press 1. If the character is not correct, press * repeatedly.

2. When you finish writing the word and it is correct, to confirm it, press 0 to

add space.

If the word is not correct, press * repeatedly. When the word that you want

appears, select the word.

If the ? character is displayed after the word, the word you intended to write

is not in the dictionary. To add the word to the dictionary, select Spell.

Complete the word (traditional text input is used), and select Save.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

■ Traditional text input

To set traditional text input on, select Options > Prediction

options >Prediction > Off.

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all

characters available under a number key are printed on the key. The characters

available depend on the selected writing language.

If the next letter you want is located on the same key as the present one, wait

until the cursor appears.

The most common punctuation marks and special characters are available under

the 1 key. For more characters, press *.

5. Messaging

You can read, write, send, and save text, multimedia, e-mail,

audio, and flash messages. All messages are organized into folders.

■ Text messages

With the short message service (SMS) you can send and receive text messages,

and receive messages that can contain pictures (network service).

Before you can send any text or SMS e-mail messages, you must save your

message center number. See Message settings p. 35.

To check SMS e-mail service availability and to subscribe to the service, contact

your service provider. To save an e-mail address in Contacts, see Search for a

contact p. 38.

Your device supports the sending of text messages beyond the character limit for

a single message. Longer messages are sent as a series of two or more messages.

Your service provider may charge accordingly. Characters that use accents or

other marks, and characters from some language options like Spanish, take up

more space limiting the number of characters that can be sent in a single

message.

An indicator at the top of the display shows the total number of characters left

and the number of messages needed for sending. For example, 673/2 means that

there are 673 characters left and that the message is sent as a series of two

messages.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

Write and send a message

1. Select Menu > Messaging > Create message > Message.

2. Enter one or more phone numbers or e-mail addresses in the To: field. To

retrieve a phone number or e-mail address from a memory, select Add.

3. Write your message in the Message: field.

4. To send the message, select Send. See Messaging p. 25.

Read and reply to a message

1. To view a received message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox.

2. To reply to a message, select Reply. Write the reply message.

3. To send the message, select Send. See Messaging p. 25.

■ Multimedia messages

Note: Only devices that have compatible features can receive and

display multimedia messages. The appearance of a message may vary

depending on the receiving device.

A multimedia message can contain some attachments.

To check availability and to subscribe to the multimedia messaging network

service, contact your service provider.

Write and send a multimedia message

The wireless network may limit the size of multimedia messages. If the inserted

image exceeds this limit, the device may make it smaller so that it can be sent by

multimedia messaging service (MMS).

1. Select Menu > Messaging > Create message > Message.

2. Write your message. To add a file, select Insert and add the file.

3. To view the message before sending it, select Options > Preview.

4. Enter one or more phone numbers or e-mail addresses in the To: field. To

retrieve a phone number or e-mail address from a memory, select Add.

5. To send the message, select Send. The device saves the message in the Outbox

folder, and the sending starts.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

and other content from being copied, modified, transferred or forwarded.

Note: When the device is sending the message, the animated

shown. This is an indication that the message has been sent by your

device to the message center number programmed into your device.

This is not an indication that the message has been received at the

intended destination. For more details about messaging services, check

with your service provider.

If an interruption occurs while the message is being sent, the device tries to

resend the message a few times. If these attempts fail, the message remains in

the Outbox folder. To cancel the sending of the messages in the Outbox folder,

scroll to the desired message, and select Options > Cancel sending.

Read and reply to a message

Important: Exercise caution when opening messages. Multimedia

message objects may contain malicious software or otherwise be

harmful to your device or PC.

1. To view a received message, select Show. To view it later, select Exit.

2. To view the whole message if the received message contains a presentation,

select Play.

To view the files in the presentation or the attachments, select Options >

Objects or Attachments.

3. To reply to the message, select Options > Reply > Message, E-mail message ,

Flash message, or Audio message. Write the reply message.

4. To send the message, select Send.

■ Flash messages

Flash messages are text messages instantly displayed upon reception. Flash

messages are not automatically saved.

To write a message, select Menu > Messaging > Create message > Flash

message. Enter the recipient’s phone number and write your message. To insert a

blinking text into the message, select Options > Insert Symbol > Insert blink char.

to set a marker. The text behind the marker blinks until a second marker is

inserted.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

A received flash message is indicated with Message: %U and a few words from

the beginning of the message. To read the message, select Read. To extract

numbers and addresses from the current message, select Options > Use detail. To

save the message, select Save and the folder in which you want to save it.

■ Nokia Xpress audio messaging

You can use the MMS to create and send an audio message. MMS must be

activated before you can use audio messages.

1. To create a message, select Menu > Messaging > Create message > Audio

message. The recorder opens. To use the recorder, see Voice recorder p. 56.

2. Speak your message.

3. Enter one or more phone numbers in the To: field, or select Add to retrieve a

number.

4. To send the message, select Send.

To listen to a received audio message, select Play. If mo re than one message is

received, select Show > Play. To listen to the message later, select Exit.

■ Memory Full

When you receive a message, and the memory for the messages is full, Memory

full. Unable to receive msgs. is shown. To first delete old messages, select OK >

Yes and the folder. Scroll to the desired message, and select Delete. If more

messages are to be deleted, select Mark. Mark all the messages you want to

delete, and select Options > Delete marked.

■ Folders

The device saves received messages in the Inbox folder.

Messages that have not yet been sent are saved in the Outbox folder.

To set the device to save the sent messages in the Sent items folder, see Save sent

messages in General settings p. 35.

To edit and send messages that you have written and saved in the Drafts folder,

select Menu > Messaging > Drafts.

You can move your messages to the Saved items folder. To organize your Saved

items subfolders, select Menu > Messaging > Saved items. To add a folder, select

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

Options > Add folder. To delete or rename a folder, scroll to the desired folder,

and select Options > Delete folder or Rename folder.

Your device has templates. To create a new template, save a message as a

template. To access the template list, select Menu > Messaging > Saved items >

Templates.

■ E-mail application

The e-mail application uses a packet data connection (network service) to allow

you to access your e-mail account. This e-mail application is different from the

SMS e-mail function. To use the e-mail function on your device, you need a

compatible e-mail system.

You can write, send, and read e-mail with your device. Your device supports POP3

and IMAP4 e-mail servers. This application does not support keypad tones.

Before you can send and retrieve any e-mail messages, you must obtain a new

e-mail account or use your current account. To check the availability of your

e-mail account, contact your e-mail service provider.

Check your e-mail settings with your e-mail service provider. You may receive the

e-mail configuration settings as a configuration message. See Configuration

settings service p. 8.

To activate the e-mail settings, select Menu > Messaging > Message settings >

E-mail messages. See E-mail messages p. 37.

Setting wizard

The setting wizard will start automatically if no e-mail settings are defined in the

device. To enter the settings manually, select Menu > Messaging > E-mail

mailbox > Options > Yes > Create manually.

The Manage accounts options allow you to add, delete, and change the e-mail

settings. Make sure that you have defined the correct preferred access point for

your operator. See Configuration p. 50.

The e-mail application requires an Internet access point without a proxy. WAP

access points normally include a proxy and do not work with the e-mail

application.

Write and send an e-mail

You can write your e-mail message before connecting to the e-mail service; or

connect to the service first, then write and send your e-mail.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

1. Select Menu > Messaging > E-mail message.

2. If more than one e-mail account is defined, select the account from which

you want to send the e-mail.

3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail

message. To attach a file from Gallery, select Options > Insert.

4. To send the e-mail message, select Send > Send now.

To save the e-mail in the Outbox folder to be sent later, select Send > Send

later.

To edit or continue writing your e-mail later, select Options > Save as draft.

The e-mail is saved in Outboxes > Drafts.

To send the e-mail later, select Menu > Messaging > E-mail > Options >

Send now or Send/check e-mail.

Download e-mail

1. To download e-mail messages that have been sent to your e-mail account,

select Menu > Messaging > E-mail > Check new e-mail.

If more than one e-mail account is defined, select the account from which

you want to download the e-mail.

The e-mail application only downloads e-mail headers at first.

2. Select Back > Inboxes, the account name, and the new message, and select

Retrieve to download the complete e-mail message.

To download new e-mail messages and to send e-mail that has been saved in the

Outbox folder, select Options > Send/check e-mail.

Read and reply to e-mail

Important:Exercise caution when opening messages. E-mail messages

may contain malicious software or otherwise be harmful to your device

or PC.

1. Select Menu > Messaging > E-mail > Inboxes, the account name, and the

desired message.

2. To reply to an e-mail, select Reply > Original text or Empty message. To reply

to many, select Options > Reply to all. Confirm or edit the e-mail address and

subject, then write your reply.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

3. To send the message, select Send > Send now.

E-mail folders

Your device saves e-mail that you have downloaded from your e-mail account in

the Inboxes folder. The Outboxes folder contains the following folders: “Account

name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for

sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished

e-mail, Outbox for saving e-mail that has not been sent, and Sent items for

saving e-mail that has been sent.

To manage the folders and their e-mail content, select Options to view the

available options of each folder.

Spam filter

To activate and define a spam filter, select Options > Spam filter > Settings in

the main e-mail idle screen. The spam filter allows you to put specific senders on

a black or white list. Black list sender messages are filtered to the Junk folder.

Unknown and white list sender messages are downloaded into the account inbox.

To blacklist a sender, select the e-mail message in the Inboxes folder and

Options > Blacklist sender.

■ Instant messaging

With instant messaging (IM) (network service) you can send short, simple text

messages to online users. You have to subscribe to a service and register with the

IM service you want to use. For more information about signing up for IM

services, contact your service provider.

To set the required settings for the IM service, see Connect. settings in Access

p. 31. The icons and texts on the display may vary, depending on the IM service.

Note: Depending on your IM service, you may not have access to all of

the features described in this guide.

Access

Select Menu > Messaging > Instant messages. Instant messages may be replaced

by another term depending on the service provider. If more than one set of

connection settings for IM service is available, select the one you want. Select

from the following options:

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

to the IM service when you switch on the device; in the login session, select

Automatic login: > On, or select Menu > Messaging > Instant messages, connect

to the IM service, and select Options > Settings > Automatic login > On.

Saved convers. — to view, erase, or rename the conversations you saved during an

IM session

Connect. settings — to edit the settings needed for messaging and presence.

connection

Connect

To connect to the service, access the instant messages menu, select the IM

service, if needed, and select Login.

To disconnect from the IM service, select Options > Logout.

Sessions

When connected to the service your status as seen by others is shown in a status

line: Status: Online, My status: Busy or Status: App. off. To change own status,

select Change.

Below the status line there are three folders containing your contacts and

showing their status: Convers. (%N), Online (%N) and Offline (%N). To expand

the folder, scroll to it and select Expand (or press scroll right), to collapse the

folder select Collapse (or press scroll left).

Conversations — shows the list of new and read instant messages or invitations

to IM during the active IM session.

indicates a new group message.

indicates a read group message.

indicates a new instant message.

indicates a read instant message.

indicates an invitation.

The icons and texts on the display depend on the IM service.

Online (%N) — shows the number of contacts that are online

Offline (%N) — shows the number of contacts that are offline

To start a conversation, expand the Online (%N) or the Offline (%N) folder and

scroll to the contact with whom you would like to chat and select Chat. To

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

answer an invitation or to reply to a message expand the Conversations folder

and scroll to the contact to whom you would like to chat and select Open. To add

contacts, see Add IM contacts p. 34.

Groups > Public groups (not visible if groups are not supported by the network) —

the list of bookmarks to public groups provided by the service provider is

displayed. To start a IM session with a group, scroll to a group, and select Join.

Enter the screen name that you want to use as your nickname in the

conversation. When you have successfully joined the group conversation, you can

start a group conversation. You can create a private group. See Groups p. 34.

Search > Users or Groups — to search for other IM users or public groups on the

network by phone number, screen name, e-mail address, or name. If you select

Groups, you can search for a group by a member in the group, or by group name,

topic, or ID.

Options > Chat or Join group — to start the conversation when you have found

the user or the group you want.

Accept or reject an invitation

If you receive a new invitation, to read it, select Read. If more than one invitation

is received, select an invitation and Open. To join the private group conversation,

select Accept, and enter the screen name you want to use as your nickname. To

reject or delete the invitation, select Options > Reject or Delete.

Read an instant message

If you receive a new message not associated with an active conversation, New

instant message is displayed. To read it, select Read. If more than one message is

received, select a message, and Open.

New messages received during an active conversation are held in Instant

messages > Conversations. If you receive a message from someone not in IM

contacts, the sender ID is displayed. To save a new contact that is not in the

device memory, select Options > Save contact.

Participate in a conversation

To join or start an IM session, write your message; and select Send.

If you receive a new message during a conversation from a person not taking part

in the current conversation,

tone.

is displayed, and the device sounds an alert

Write your message; and select Send. Your message is displayed, and the reply

message is displayed below your message.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

Add IM contacts

When connected to the IM service, in the IM main menu select Options > Add

contact > By mobile number, Enter ID manually, Search from serv., or Copy from

server (depending on service provider).

Scroll to a contact. To start a conversation, select Chat.

Block or unblock messages

When you are in a conversation and want to block messages, select Options >

Block contact.

To block messages from a specific contact in your contacts list, scroll to the

contact in Conversations, Online (%N) or Offline (%N) and select Options > Block

contact > OK.

To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to

the contact you want to unblock, and select Unblock > OK.

Groups

You can use the public groups provided by the service provider, or create your

own private groups for an IM conversation.

Public

You can bookmark public groups your service provider may maintain. Connect to

the IM service, and select Groups > Public groups. Select a group, and Join. If you

are not in the group, enter your screen name as your nickname for the group. To

delete a group from your list, select Options > Delete group.

To search for a group, select Groups > Public groups > Search groups.

Private

Connect to the IM service, and from the main menu select Options > Create

group. Enter the name for the group and the screen name you want to use as your

nickname. Mark the private group members in the contacts list, and write an

invitation.

■ Messages

The voice mailbox is a network service and you may need to subscribe to it. For

more information contact your service provider.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

To call your voice mailbox, select Menu > Messaging > Voice messages > Listen

to voice messages. To enter, search for, or edit your voice mailbox number, select

Voice mailbox number.

If supported by the network,

indicates new voice messages. To call your

voice mailbox number, select Listen.

You can also receive messages on various topics from your service provider

(network service). For more information, contact your service provider. Select

Menu > Messaging > Info messages.

Write and send service requests (also known as USSD commands), such as

activation commands for network services, to your service provider. Select

Menu > Messaging > Service commands.

To delete messages, select Menu > Messaging > Delete messages > By message

to delete single messages, By folder to delete all messages from a folder, or All

messages.

SIM messages are specific text messages saved to your SIM card. You can copy or

move those messages to the device memory, but not vice versa. To read SIM

messages, select Menu > Messaging > Options > SIM messages.

■ Message settings

General settings

General settings are common for text and multimedia messages.

Select Menu > Messaging > Message settings > General settings and from the

following options:

Save sent messages > Yes — to set the device to save the sent messages in the

Sent items folder

Overwriting in Sent items > Allowed — to set the device to overwrite the old sent

messages with the new ones when the message memory is full. This setting is

shown only if you set Save sent messages > Yes.

Font size — to select the font size used in messages

Graphical smileys > Yes — to set the device to replace character-based smileys

with graphical ones

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

Text messages

The text message settings affect the sending, receiving, and viewing of text and

SMS e-mail messages.

Select Menu > Messaging > Message settings > Text messages and from the

following options:

Delivery reports > Yes — to ask the network to send delivery reports about your

messages (network service)

Message centers > Add center — to set the phone number and name of the

message center that is required for sending text messages. You receive this

number from your service provider.

Message center in use — to select the message center in use

E-mail message centers > Add center — to set the phone numbers and name of

the

e-mail center for sending SMS e-mails.

E-mail center in use — to select the SMS e-mail message center in use

Message validity — to select the length of time for which the network attempts

to deliver your message

Messages sent via — to select the format of the messages to be sent: Text, Page,

or Fax (network service)

Use packet data > Yes — to set GPRS as the preferred SMS bearer

Character support > Full — to select all characters in the messages to be sent as

viewed. If you select Reduced, characters with accents and other marks may be

converted to other characters.

Reply via same center > Yes — to allow the recipient of your message to send you

a reply using your message center (network service)

Multimedia messages

The message settings affect the sending, receiving, and viewing of multimedia

messages. You may receive the configuration settings for multimedia messaging

as a configuration message. See Configuration settings service p. 8. You can also

enter the settings manually. See Configuration p. 50.

Select Menu > Messaging > Message settings > Multimedia msgs. and from the

following options:

Delivery reports > Yes — to ask the network to send delivery reports about your

messages (network service)

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e s s a g i n g

MMS creation mode - Allows you to select whether or not to create multimedia

messages with restrictions on content. When selecting Restricted receiving

device is more likely to support sent messages. Select Free enables you to add

various types of multimedia to the message.

Image size in MMS — to set the image size in multimedia messages

Default slide timing — to define the default time between slides in multimedia

messages

Allow multimedia reception — to receive or block the multimedia message, select

Yes or No. If you select In home network, you cannot receive multimedia

messages when outside your home network. The default setting of the

multimedia message service is generally In home network. The availability of this

menu depends on your device.

Incoming multi- media messages — to allow the reception of multimedia

messages automatically, manually after being prompted, or to reject the

reception. This setting is not shown if Allow multimedia reception is set to No.

Allow advertisements — to receive or reject advertisements. This setting is not

shown if Allow multimedia reception is set to No, or Incoming multi- media

messages is set to Reject.

Configuration settings > Configuration — only the configurations that support

multimedia messaging are shown. Select a service provider, Default, or Personal

config. for multimedia messaging. Select Account and an MMS account

contained in the active configuration settings.

E-mail messages

The settings affect the sending, receiving, and viewing of e-mail. You may receive

the settings as a configuration message. See Configuration settings service p. 8.

You can also enter the settings manually. See Configuration p. 50.

Select Menu > Messaging > Message settings > E-mail messages and from the

following options:

Configuration — to select the set that you want to activate

Account — to select an account provided by the service provider

My name — to enter your name or nickname

E-mail address — to enter your e-mail address

incoming e-mail

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C o n t a c t s

Incoming mail settings — to enter the number of mails to be retrieved in

maximum

Outgoing mail settings (SMTP) — to enter SMTP (simple mail transfer protocol)

information and setting options used when sending e-mail

Display terminal window > Yes — to perform manual user authentication for

intranet connections

6. Contacts

You can save names and phone numbers (contacts) in the device

memory and in the SIM card memory.

The device memory may save contacts with additional details, such as various

phone numbers and text items. You can also save an image for a limited number

of contacts.

The SIM card memory can save names with one phone number attached to them.

The contacts saved in the SIM card memory are indicated by

■ Save contacts

Make sure that the memory in use is Phone or Phone and SIM. See Settings p. 40.

To save a name and phone number, select Menu > Contacts > Names >

Options > Add new contact.

The first number you save is automatically set as the default number, and it is

indicated with a frame around the number type indicator (for example,

When you select a name from contacts (for example, to make a call), the default

number is used unless you select another number.

In the device memory you can save different types of phone numbers, a tone or a

video clip, and short text items for a contact.

■ Search for a contact

Select Menu > Contacts > Names. Scroll through the list of contacts, or enter

the first characters of the name you are searching for. Press the call key to call

the number.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C o n t a c t s

To save details for a contact, search for the contact to which you want to add a

detail, and select Details > Options > Add detail. Select from the options

available.

■ Edit contacts

Select Options > Edit, search for the contact, and select Details to edit a name,

number, text item, or to change the image.

■ Delete contacts

To delete all the contacts and the details attached to them from the device or

SIM card memory, select Menu > Contacts > Delete all contacts > From phone

mem. or From SIM card.

To delete a contact, search for the desired contact, and select Options > Delete

contact.

To delete a number, text item, or an image attached to the contact, search for the

contact, and select Details. Scroll to the desired detail, and select Options >

Delete and your desired option.

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers

saved in the memory into caller groups with different ringing tones and group

images.

■ Synchronize all

Synchronize your calendar, contacts data, and notes with a remote Internet

server (network service). For details see Synchronize from a server p. 47.

■ Copy or move contacts

You can move and copy contacts from the device memory to the SIM card

memory, or vice versa. The SIM card can save names with one phone number

attached to them.

To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to

the contact, and select Options > Move contact or Copy contact.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C o n t a c t s

To move or copy marked contacts, select Menu > Contacts > Names. Scroll to a

contact, and select Options > Mark. Then mark all other contacts, and select

Options > Move marked or Copy marked.

To move or copy all contacts, select Menu > Contacts > Move contacts or Copy

contacts.

■ Business cards

You can send and receive a person’s contact information from a compatible

device that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you want to

send, and select Details > Options > Send bus. card.

When you receive a business card, select Show > Save to save the business card

in the device memory. To discard the business card, select Exit > Yes.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select the SIM card or device memory for your contacts.

Select Phone and SIM to recall names and numbers from both memories. In that

case, when you save names and numbers, they are saved in the device memory.

Contacts view — to select how the names and numbers in Contacts are displayed

Name display — to select whether the contact’s first or last name is displayed

first

Font size — to set the font size for the list of contacts

Memory status — to view the free and used memory capacity

■ 1-touch dialing

To assign a number to a speed-dialing key, select Menu > Contacts > 1-touch

dialing and scroll to the speed-dialing number you want.

Select Assign, or if a number has already been assigned to the key, select

Options > Change. Select Find and locate the contact you want to assign. If the

1-touch dialing function is off, the device asks whether you want to activate it.

See also 1-touch dialing in Call p. 48.

To make a call using the speed-dialing keys, see 1-touch dialing p. 22.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

L o g

■ Info, service, and my numbers

Select Menu > Contacts and from one of these options:

Info numbers — to call the information numbers of your service provider if the

numbers are included on your SIM card (network service)

Service numbers — to call the service numbers of your service provider if the

numbers are included on your SIM card (network service)

My numbers — to view the phone numbers assigned to your SIM card, if the

numbers are included on your SIM card

7. Log

The device registers your missed, received, and dialed calls if the

network supports it and the device is switched on and within the network service

area.

To view the information on your calls, select Menu > Log > Missed calls,

Received calls, or Dialed numbers. To view your recent missed and received calls

and the dialed numbers chronologically, select Call log. To view the contacts to

whom you most recently sent messages, select Message recipients.

To view the information on your recent communications, select Menu > Log >

Call timers, Packet data counter, or Packet data conn. timer.

To view how many text and multimedia messages you have sent and received,

select Menu > Log > Message log.

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding off for

billing, taxes, and so forth.

Some timers may be reset during service or software upgrades.

8. Settings

■ Profiles

Your device has various settings groups called profiles, for which you can

customize the device tones for different events and environments.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Select Menu > Settings > Profiles, the desired profile and from the following

options: Activate, Customize, or Timed.

■ Themes

A theme contains elements for personalizing your device.

Select Menu > Settings > Themes and from the following options: Select theme

orTheme downloads.

■ Tones

You can change the tone settings of the selected active profile.

Select Menu > Settings > Tones. You can find the same settings in the Profiles

menu. See Customize in Profiles p. 41.

To set the device to ring only for calls from phone numbers that belong to a

selected caller group, select Alert for. Scroll to the caller group you want or All

calls, and select Mark.

Select Options > Save to save the settings or Cancel to leave the settings

unchanged.

If you select the highest ringing tone level, the ringing tone reaches its highest

level after a few seconds.

■ Main Display

Select Menu > Settings > Main display and from the available options:

Wallpaper — to add the background image in the standby mode

Active standby — to switch the active standby mode on or off and to organize and

personalize the active standby mode

Standby mode font color — to select the color for the text in the standby mode

Navigation key icons — to display the icons of the current navigation key

shortcuts in the standby mode when active standby is off

Notification details — to display or hide details, such as contact information in a

missed call or message received notifications

Fold animation — to set your device to display an animation when you open and

close the device

Font size — to set the font size for messaging, contacts, and web pages

Operator logo — to set your device to display or hide the operator logo

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Cell info display > On — to display the cell identity, if available from the network

■ Mini display

Select Menu > Settings > Mini display. You can change the settings for

Wallpaper, Screen saver, Fold animation, and other settings.

■ Time and date

To change the time and date settings, select Menu > Settings > Date and time >

Date and time settings, Date and time format settings, or Auto-update of date &

time (network service).

When traveling to a different time zone, select Menu > Settings > Date and

time > Date and time settings > Time zone and the time zo n e of your location in

terms of the time difference with respect to Greenwich Mean Time (GMT) or

Universal Time Coordinated (UTC). For example, GMT -5 denotes the time zone

for New York (USA), 5 hours west of Greenwich/London (UK).

■ My shortcuts

With personal shortcuts you get quick access to often used functions of the

device.

To select a function from the list, select Menu > Settings > My shortcuts > Left

selection key, Right selection key, Navigation key, or Active standby key

Voice commands

To call contacts and carry out device functions, say the voice commands. Voice

commands are language-dependent. To set the language, see Voice recognition

language in Phone p. 48.

To select the device functions to activate with voice commands, select Menu >

Settings > My shortcuts > Voice commands and a folder. Scroll to a function.

indicates that the voice tag is activated. To activate the voice tag, select Add. To

play the activated voice command, select Playback. To use voice commands, see

Enhanced voice dialing p. 22.

To manage the voice commands, scroll to a device function, and select from the

following options:

Edit or Remove — to change or deactivate the voice command of the selected

function

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Add all or Remove all — to activate or deactivate voice commands to all functions

in the voice commands list

■ Connectivity

You can connect the device to a compatible device using a Bluetooth wireless

technology or a USB data cable connection. You can also define the settings for

EGPRS dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 2.0 + EDR supporting the

following profiles: generic access, network access, generic object exchange,

hands-free, headset, object push, file transfer, dial-up networking, SIM access,

service discovery application profile, advanced audio and distribution profile,

audio/video remote control profile, generic audio/video distribution profile,

personal area network profile, and serial port. To ensure interoperability between

other devices supporting Bluetooth technology, use Nokia approved

enhancements for this model. Check with the manufacturers of other devices to

determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations.

Check with your local authorities or service provider.

Features using Bluetooth technology or allowing such features to run in the

background while using other features, increase the demand on battery power

and reduce the battery life.

Bluetooth technology allows you to connect the device to a compatible

Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth

technology communicate using radio waves, your device and the other devices do

not need to be in direct line-of-sight, although the connection can be subject to

interference from obstructions such as walls or from other electronic devices.

Set up a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth and from the following

options:

Bluetooth > On or Off — to activate or deactivate the Bluetooth function.

indicates that Bluetooth is activated. When activating Bluetooth technology for

the first time, you are asked to give a name for the device. Use a unique name

that is easy for others to identify.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Search for audio enhancements — to search for compatible Bluetooth audio

devices. Select the device that you want to connect to the device.

Paired devices — to search for any Bluetooth device in range. Select New to list

any Bluetooth device in range. Select a device, and Pair. Enter an agreed

Bluetooth passcode of the device (up to 16 characters) to associate (pair) the

device to your phone. You must only give this passcode when you connect to the

device for the first time. Your phone connects to the device, and you can start

data transfer.

Bluetooth wireless connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth

connection is currently active, select Active devices. To view a list of Bluetooth

devices that are currently paired with the phone, select Paired devices.

Bluetooth settings

To define how your device is shown to other Bluetooth devices, select Menu >

Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility

or My phone's name.

If you are concerned about security, turn off the Bluetooth function, or set My

phone's visibility to Hidden. Only accept Bluetooth communication from other

devices you recognize and have agreed to accept.

Packet data

General packet radio service (GPRS) is a network service that allows mobile

devices to send and receive data over an internet protocol (IP)-based network.

To define how to use the service, select Menu > Settings > Connectivity > Packet

data > Packet data connection and from the following options:

When needed — to set the packet data connection to established when an

application needs it. The connection will be closed when the application is

terminated.

Always online — to set the device to automatically connect to a packet data

network when you switch the device on

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Modem settings

You can connect the device using Bluetooth wireless technology or USB data

cable connection to a compatible PC and use the device as a modem to enable

GPRS connectivity from the PC.

To define the settings for connections from your PC, select Menu > Settings >

Connectivity > Packet data > Packet data settings > Active access point, and

activate the access point you want to use. Select Edit active access point >

Packet data access point, enter a name to change the access point settings, and

select OK. Select Packet data access point, enter the access point name (APN) to

establish a connection to an network, and select OK.

You can also set the EGPRS dial-up service settings (access point name) on your

PC using the Nokia Modem Options software. See Nokia PC Suite p. 73. If you

have set the settings both on your PC and on your device, the PC settings are

used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible

device (for example, a mobile phone), a compatible PC, or a remote Internet

server (network service).

Your device allows data transfer with a compatible PC or another compatible

device when using the device without a SIM card.

Transfer contact list

To copy or synchronize data from your phone, the name of the device and the

settings must be in the list of transfer contacts. If you receive data from another

device (for example, a compatible mobile phone), the corresponding transfer

contact is automatically added to the list, using the contact data from the other

device. Server sync and PC sync are the original items in the list.

To add a new transfer contact to the list (for example a mobile phone), select

Menu > Settings > Connectivity > Data transfer > Options > Add contact >

Phone sync or Phone copy, and enter the settings according to the transfer type.

To edit the copy and synchronize settings, select a contact from the transfer

contact list and Options > Edit.

To delete a transfer contact, select it from the transfer contact list, select

Options > Delete.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Data transfer with a compatible device

For synchronization use Bluetooth wireless technology or a cable connection. The

other device must be activated for receiving data.

To start data transfer, select Menu > Settings > Connectivity > Data transfer and

the transfer contact from the list, other than Server sync or PC sync. According to

the settings, the selected data is copied or synchronized.

Synchronize from a compatible PC

To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite

software for your device on the PC. Use Bluetooth wireless technology or a USB

data cable for the synchronization, and start the synchronization from the PC.

Synchronize from a server

To use a remote internet server, subscribe to a synchronization service. For more

information and the settings required for this service, contact your service

provider. You may receive the settings as a configuration message. See

Configuration settings service p. 8 and Configuration p. 50.

To start the synchronization from your device, select Menu > Settings >

Connectivity > Data transfer > Server sync. Depending on the settings, select

Initializing sync or Initializing copy.

Synchronizing for the first time or after an interrupted synchronization may take

up to 30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the device and a

compatible PC or a printer supporting PictBridge. You can also use the USB data

cable with Nokia PC Suite.

To activate the device for data transfer or image printing, connect the data cable.

Confirm USB data cable connected. Select mode. and select from the following

options:

Nokia mode — to use the device to interact with applications on a PC that has

Nokia PC Suite

Printing & Media — to use the device with a PictBridge compatible printer, or to

connect the device to a PC to synchronize it with Windows Media Player (music,

video)

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

Data storage — to connect to a PC that does not have Nokia software and use the

device as a data storage

To change the USB mode, select Menu > Settings > Connectivity > USB data

cable > Nokia mode, Printing & Media, or Data storage.

■ Call

Select Menu > Settings > Call and from the following options:

Call forwarding — to forward your incoming calls (network service). You may not

be able to forward your calls if some call restriction functions are active. See Call

restrictions in Security p. 50.

Anykey answer > On — to answer an incoming call by briefly pressing any key,

except the power key, the camera key, the left and right selection keys, or the end

key

Automatic redial > On — to make a maximum of 10 attempts to connect the call

after an unsuccessful call attempt

Voice clarity > Active — to enhance speech intelligibility especially in noisy

environments

1-touch dialing > On — to dial the names and phone numbers assigned to the

speed-dialing keys 2 to 9 by pressing and holding the corresponding number key

Call waiting > Activate — to have the network notify you of an incoming call

while you have a call in progress (network service). See Call waiting p. 23.

Summary after call > On — to briefly display the approximate duration and cost

(network service) of the call after each call

Send my caller ID > Yes — to show your phone number to the person you are

calling (network service). To use the setting agreed upon with your service

provider, select Set by network.

Answer when fold is opened > On — to answer an incoming call by opening the

fold

■ Phone

Select Menu > Settings > Phone and from the following options:

Language settings — to set the display language of your device, select Phone

language. Automatic selects the language according to the information on the

SIM card. To set a language for the voice playback, select Voice recognition

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

language. See Enhanced voice dialing p. 22 and Voice commands in My shortcuts

p. 43.

Memory status — to view the amount of used and available device memory

Automatic keyguard — to set the keypad of your device to lock automatically

after a preset time delay when the device is in the standby mode and no function

of the device has been used. Select On, and set the time.

Security keyguard — to set the device to ask for the security code when you

unlock the keyguard. Enter the security code, and select On.

Welcome note — to write the note that is shown when the device is switched on

Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You

cannot access this option during an active call.

Operator selection > Automatic — to set the device to automatically select one of

the cellular networks available in your area. With Manual you can select a

network that has a roaming agreement with your service provider.

Help text activation — to select whether the device shows help texts

Start-up tone > On — the device plays a tone when switched on

Flight query > On — the device asks whether to use the flight profile every time

when switched on. With flight profile all radio connections are switched off. The

flight profile should be used in areas sensitive to radio emissions.

Confirm SIM service actions — See SIM services p. 67.

■ Enhancements

This menu or the following options are shown only if the device is or has been

connected to a compatible mobile enhancement.

Select Menu > Settings > Enhancements. Select an enhancement, and

depending on the enhancement, from the following options:

Default profile — to select the profile that you want to be automatically activated

when you connect to the selected enhancement

Automatic answer — to set the device to answer an incoming call automatically

after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer

is off.

Lights — to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a key press.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

If your device is provided with a hearing aid coil select Hearing aid > T-coil

hearing aid mode > On to optimize the sound quality when using a t-coil hearing

aid.

is shown when the T-coil hearing aid mode is active.

■ Configuration

You can configure your device with settings required for certain services to

function correctly. Your service provider may also send you these settings. See

Configuration settings service p. 8.

Select Menu > Settings > Configuration and from the following options:

Default configuration settings — to view the service providers saved in the device.

To set the configuration settings of the service provider as default settings, select

Options > Set as default.

Activate default in all applications — to activate the default configuration

settings for supported applications

Preferred access point — to view the saved access points. Scroll to an access

point, and select Options > Details to view the name of the service provider, data

bearer, and packet data access point or GSM dial-up number.

Connect to service provider support — to download the configuration settings

from your service provider

Device manager settings — to allow or prevent the device from receiving device

software updates. This option may not be available, depending on your device.

Personal configuration settings — to add new personal accounts for various

services manually, and to activate or delete them. To add a new personal account

if you have not added any, select Add new; otherwise, select Options > Add new.

Select the service type, and select and enter each of the required parameters. The

parameters differ according to the selected service type. To delete or activate a

personal account, scroll to it, and select Options > Delete or Activate.

■ Security

When security features that restrict calls are in use (such as call restriction,

closed user group, and fixed dialing) calls still may be possible to the official

emergency number programmed into your device.

Select Menu > Settings > Security and from the following options:

PIN code request and UPIN code request — to set the device to ask for your PIN or

UPIN code every time the device is switched on. Some SIM cards do not allow the

code request to be turned off.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S e t t i n g s

PIN2 code request — to select whether the PIN2 code is required when using a

specific device feature which is protected by the PIN2 code. Some SIM cards do

not allow the code request to be turned off.

Call restrictions — to restrict incoming calls to and outgoing calls from your

device (network service). A restriction password is required.

Fixed dialing — to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card. When the fixed dialing is on, GPRS

connections are not possible except while sending text messages over a GPRS

connection. In this case, the recipient’s phone number and the message center

number must be included in the fixed dialing list.

Closed user group — to specify a group of people whom you can call and who can

call you (network service)

Security level > Phone — to set the device to ask for the security code whenever a

new SIM card is inserted into the device. If you select Memory, the device asks for

the security code when the SIM card memory is selected, and you want to change

the memory in use.

Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or

restriction password

Code in use — to select whether the PIN code or UPIN code should be active

Authority certificates or User certificates — to view the list of the authority or

user certificates downloaded into your device. See Certificates p. 72.

Security module settings — to view Security module details, select Module PIN

request, or change the module PIN and signing PIN. See also Access codes p. 20.

■ Digital rights management

Digital rights management (DRM) is copyright protection, designed to prevent

modification and to limit distribution of protected files. When you download

protected files, such as sound, video, themes, or ringing tones to your device, the

files are free, but locked. You pay for the key to activate the file, and the

activation key is automatically sent to your device when you download the file.

To view the permissions for a protected file, scroll to the file, and select

Options > Activation keys. For example, you can see how many times you can

view a video or how many days you have left for listening to a song.

To extend the permissions for a file, select Options and the corresponding option

for the file type, such as Activate theme. You can send certain types of protected

files to your friends, and they can buy their own activation keys.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G a l l e r y

and other content from being copied, modified, transferred or forwarded.

This device supports OMA DRM 1.0 and 2.0.

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Restore settings. Enter the security code. The names and phone

numbers saved in Contacts, are not deleted.

9. Gallery

In this menu you can manage images, video clips, music files,

themes, graphics, tones, recordings, and received files. These files are stored in

the device memory or an attached microSD memory card and may be arranged in

folders.

Your device supports an activation key system to protect acquired content.

Always check the delivery terms of any content and activation key before

acquiring them, as they may be subject to a fee.

and other content from being copied, modified, transferred or forwarded.

To see the list of folders, select Menu > Gallery.

To see the available options of a folder, select a folder > Options.

To view the list of files in a folder, select a folder > Open.

To see the available options of a file, select a file > Options.

To view the folders of the memory card when moving a file, scroll to the memory

card, and press the scroll key right.

■ Print images

Your device supports Nokia XPressPrint. To connect it to a compatible printer use

a data cable or send the image via Bluetooth to a printer supporting Bluetooth

technology. See Connectivity p. 44.

You can print images that are in the .jpg format. The images taken with the

camera are automatically saved in the .jpg format.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

G a l l e r y

Select the image you want to print and Options > Print.

■ Memory card

Keep all memory cards out of the reach of small children.

You can use the microSD memory card to store your multimedia files such as

video clips, music tracks, and sound files, images, and messaging data, and to

back up information from device memory.

Some of the folders in Gallery with content that the device use, for example,

Themes, may be stored on a memory card.

To insert and remove the microSD memory card see Insert a microSD card p. 11.

Format the memory card

When a memory card is formatted, all data on the card is permanently lost. Some

memory cards are supplied preformatted and others require formatting. Consult

your retailer to find out if you must format the memory card before you can use

it.

To format a memory card, select Menu >Gallery or Applications, the memory

card folder

, Options > Format mem. card > Yes.

When formatting is complete, enter a name for the memory card.

Lock the memory card

To set a password to lock your memory card to help prevent unauthorized use,

select Options > Set password. The password can be up to eight characters long.

The password is stored in your device and you do not have to enter it again while

you are using the memory card on the same device. If you want to use the

memory card on another device, you are asked for the password. To delete the

password, select Options > Delete password.

Check memory consumption

To check the memory consumption of different data groups and the available

memory for installing new applications or software on your memory card, select

Options > Details.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e d i a

10. Media

When taking and using images or video clips, obey all laws and

respect local customs as well as privacy and legitimate rights of others, including

copyrights.

You can take photos or record live video clips with the built-in VGA camera with

autofocus and zoom.

■ Camera

The camera produces pictures in .jpg format, and you can digitally zoom up to

eight times.

Take a photo

To open the camera viewfinder, select Menu > Media > Camera.

To zoom in and out in camera mode, press volume keys up

or down.

To take an image, select Capture, or press camera key. The

device saves the images on the memory card.

Select Options to set Night mode on if the lighting is dim,

Self-timer on to activate the self-timer, Img. sequence on

to take images in a fast sequence. With the highest image

size setting three images are taken in a sequence, with

other size settings eight images are taken.

Select Options > Settings >Image preview time and a

preview time to display the taken images on the display.

During the preview time, select Back to take another image

or Send to send the image as a multimedia message.

Your device supports an image capture resolution of

640 x 480 pixels.

Camera and video options

To use a filter, select Options > Effects > Normal, Grayscale, Sepia, Negative.

To change the camera and video settings, select Options > Settings.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e d i a

■ Video

You can record video clips in .3gp format. Available recording time depends on

the video clip length and quality settings.

The length and file size of the clips may vary depending on the selected quality

and available memory. To set the quality of your video clips, select Menu >

Media > Video > Options > Settings >Video clip quality > High, Normal or Basic.

To select the file size limit, select Menu > Media > Video > Options > Settings >

Video clip length. Default means that the file size is limited so that it fits into a

multimedia message (multimedia message size can vary among devices).

Maximum means that all available memory is used. Available memory depends

on where the video clip is stored.

Record a video clip

Select Menu > Media > Video > Record. You can also press and hold the camera

key. To pause the recording, select Pause; to resume the recording, select

Continue. To stop the recording, select Stop. The device saves the recording in

Gallery > Video clips.

To zoom in or out, press the volume key up or down, or scroll left and right.

■ Music player

Your device includes a music player for listening to music tracks, recordings or,

other sound files that you have transferred to the device with the Nokia Audio

Manager application, which is part of Nokia PC Suite. See Nokia PC Suite p. 73.

Music files stored in a folder in the device memory or in a folder of the memory

card, will automatically be detected and added to the default track list.

To open the music player, select Menu > Media > Music player.

Playing the music tracks

Warning! Listen to music at a moderate level. Continuous exposure to

high volume may damage your hearing.

Operate the music player with the keys on the device or with the virtual keys on

the display.

When you open the Music player menu, the details of the first track on the

default track list are shown. To play, select

To adjust the volume level, use the volume keys on the side of the device.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

M e d i a

To pause the playing, select

To stop the playing, press and hold the end key

To skip to the next track, select . To skip to the beginning of the previous

track, select

To rewind the current track, select and hold

. To fast forward the current

. Release the key at the position you want.

track, select and hold

Settings for the music player

In the Music player menu, the following options may be available:

All songs — View all the tracks available on the track list and play the desired

track. To play a track, scroll to the desired track, and select Play.

If you select Options, you can refresh the track list (for example, after adding

new tracks to the list) and change the track list that is shown when you open the

music player menu if several track lists are available in the device. You also my

send a track to another device.

Music library — View the database of the available music tracks. You can choose

the music to listen to, and create and manage the content of the library.

Play options — Select Random to play the tracks on the track list in random order.

Select Repeat to play the current track or the entire track list repeatedly.

Media equalizer — Select or define an equalizer setting. See Equalizer p. 57.

Play via Bluetooth — Connect to a Bluetooth audio accessory.

Use tone — Set the currently played music track, for example, as ringing tone.

Web page — to access a page associated with the currently played track. Dimmed

if no Web page is available.

Music downloads— to connect to a browser service related to the current track.

This function is only available when the address of the service is included in the

track.

■ Voice recorder

You can record pieces of speech, sound, or an active call, and save them in

Gallery. This is useful when recording a name and phone number to write down

later.

The recorder cannot be used when a data call or GPRS connection is active.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

O r g a n i z e r

Record sound

1. Select Menu > Media > Recorder.

To use the graphical keys

, or

on the display, scroll left or right to

the desired key, and select it.

2. To start the recording, select

. To start the recording during a call, select

Options > Record. While recording a call, all parties to the call hear a faint

beeping sound. When recording a call, hold the device in the normal position

near to your ear. To pause the recording, select

3. To end the recording, select

. The recording is saved in Gallery >

Recordings.

To listen to the latest recording, select Options > Play last recorded.

To send the last recording, select Options > Send last recorded.

To see the list of recordings in Gallery, select Options > Recordings list >

Recordings.

■ Equalizer

To control the sound quality when using the music player by amplify or diminish

frequency bands.

Select Menu > Media > Equalizer.

To activate a set, scroll to one of the equalizer sets, and select Activate.

To view, edit, or rename a selected set, select Options > View, Edit, or Rename.

Not all sets can be edited or renamed.

11. Organizer

■ Alarm clock

You can set the device to alarm at a desired time. Select Menu > Organizer >

Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change the

alarm time when the alarm time is set, select On.

To set the device to alert you on selected days of the week, select Repeat alarm.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

O r g a n i z e r

To select the alarm tone or set the radio as the alarm tone, select Alarm tone:. If

you select the radio as an alarm tone, connect the headset to the device.

To set a snooze time-out, select Snooze time-out and the time.

Stop the alarm

The device sounds an alert tone even if the device was switched off. To stop the

alarm, select Stop. If you let the device continue to sound the alarm for a minute

or select Snooze, the alarm stops for the time you set in Snooze time-out, then

resumes.

If the alarm time is reached while the device is switched off, the device switches

itself on and starts sounding the alarm tone. If you select Stop, the device asks

whether you want to activate the device for calls. Select No to switch off the

device or Yes to make and receive calls. Do not select Yes when wireless device

use may cause interference or danger.

■ Calendar

Select Menu > Organizer > Calendar.

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type, and the beginning of the note is shown below the calendar. To

view the day notes, select View. To view a week, select Options > Week view. To

delete all notes in the calendar, select the month or week view, and select

Options > Delete all notes.

To set the date, time, time zone, date or time format, date separator, default

view, or the first day of the week, select Settings.

To set the device to delete old notes automatically after a specified time, select

Auto-delete notes.

Make a calendar note

Select Menu > Organizer > Calendar. Scroll to the date, and select Options >

Make a note and one of the following note types:

Meeting,

Call,

Birthday, Memo, or Reminder. Fill in the fields.

Note alarm

The device displays the note and if set, sounds a tone. With a call note

on the

display, to call the displayed number, press the call key. To stop the alarm and to

view the note, select View. To stop the alarm for 10 minutes, select Snooze.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

O r g a n i z e r

To stop the alarm without viewing the note, select Exit.

■ To-do list

To save a note for a task that you must do, select Menu > Organizer > To-do list.

To make a note if no note is added, select Add note. Fill in the fields, and select

Save.

To view a note, scroll to it, and select View. While viewing a note, you can also

select an option to edit the attributes. You can also select an option to delete the

selected note and delete all the notes that you have marked as done.

■ Notes

To write and send notes, select Menu > Organizer > Notes.

To make a note if no note is added, select Add note. Write the note, and select

Save.

■ Calculator

The calculator in your device provides basic arithmetic and trigonometric

functions, calculates the square and the square root, the inverse of a number, and

converts currency values.

Note: This calculator has limited accuracy and is designed for simple

calculations.

Select Menu > Organizer > Calculator. When 0 is displayed on the screen, enter

the first number in the calculation. Press # for a decimal point. Scroll to the

desired operation or function or select it from the Options. Enter the second

number. Repeat this sequence as many times as it is necessary. To start a new

calculation, first select and hold Clear.

To perform a currency conversion, select Menu > Organizer > Calculator. To save

the exchange rate, select Options > Exchange rate. Select either of the displayed

options. Enter the exchange rate, press # for a decimal point, and select OK. The

exchange rate remains in the memory until you replace it with another one. To

perform the currency conversion, enter the amount to be converted, and select

Options > To home or To foreign.

Note: When you change base currency, you must enter new exchange

rates because all previously set exchange rates are cleared.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

■ Countdown timer

To start the countdown timer, select Menu > Organizer > Timer > Normal timer,

enter the alarm time, and write a note text that is displayed when the time

expires. To start the countdown timer, select Start. To change the countdown

time, select Change time. To stop the timer, select Stop timer.

To have an interval timer with up to 10 intervals started, first enter the intervals.

Select Menu > Organizer > Timer > Interval timer. To start the timer, select Start

timer > Start.

■ Stopwatch

You can measure time, take intermediate times, or take lap times using the

stopwatch. During timing, the other functions of the device can be used. To set

the stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other

features increases the demand on battery power and reduces the battery life.

Select Menu > Organizer > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select

Start. Select Split every time that you want to take an intermediate time. To stop

the time observation, select Stop.

To save the measured time, select Save.

To start the time observation again, select Options > Start. The new time is

added to the previous time. To reset the time without saving it, select Reset.

Lap timing — to take lap times

Continue — to view the timing that you have set in the background

Show last time — to view the most recently measured time if the stopwatch is not

reset

View times or Delete times — to view or delete the saved times

12. Push to talk

Select Menu > Push to talk.

Push to talk (PTT) over cellular is a two-way radio service available over a GPRS

cellular network (network service).

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

You can use PTT to have a conversation with one person or with a group of people

(channel) having compatible devices. While you are connected to the PTT service,

you can use the other functions of the device.

To check availability and costs, and to subscribe to the service, contact your

network operator. Roaming services may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service

settings. See PTT settings p. 65 and Configuration settings p. 66.

■ PTT channels

A PTT channel comprises a group of people (for example, friends or a workteam)

who joined the channel after they where invited to. When you call a channel, all

members joined to the channel hear the call simultaneously.

There are different types of PTT channels:

Public channel — Every channel member can invite other persons.

Private channel — Only persons which receive an invitation by the channel

creator can join in.

Provisioned channel — A permanent channel is created by the service provider.

You can set the status of each channel to Active or Inactive.

The number of active channels and the number of members per channel is

limited. Contact your service provider for details.

Create a channel

To add a channel, select Menu > Push to talk > Add channel and enter the

settings in the form fields:

Channel name: — Enter a name for the new channel.

Channel status: — Select Active to set the channel active, or Inactive to disable

the channel.

Chnl. nickname: — Enter your nick name to be shown the new channel.

Chnl. security: > Public channel or Private channel

Image: — Select Change and an image from the Gallery or the Default graphic to

set a graphic for the new channel.

To send an invitation to the channel, select Yes when the device requests it. The

recipient of the invitation is added to the member list of the channel when the

invitation is accepted. To send further invitations select Menu > Push to talk >

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

Channel list, a channel, and Options > Send invitation. To send the invitation, use

a text message.

To add a provisioned channel, select Menu > Push to talk > Add channel >

Options > Edit add. manually. Enter the Channel addr.: provided by your service

provider.

Receive an invitation

1. When you receive a text message invitation to a channel, Channel invitation

received: %U is displayed.

2. To view the nickname of the person who sent the invitation and the channel

address if the channel is not a private channel, select View.

3. To add the channel to your device, select Save.

4. To set the status for the channel, select Active or Inactive.

To reject the invitation, select Exit > Yes, or select View > Discard > Yes.

■ Switch PTT on and off

To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or

press and hold the PTT key.

indicates the PTT connection.

indicates that

the service is temporarily unavailable. If you have added channels to the device,

you are automatically joined to the active channels.

You may assign a default function to the PTT key to open the channel list, the

contacts list or a single channel or contact. See PTT settings p. 65.

To disconnect from the PTT service, select Switch PTT off.

■ Make and receive a PTT call

Warning: Do not hold the device near your ear when the loudspeaker is

in use, because the volume may be extremely loud.

To make a channel call, a one-to-one call, or a call to multiple recipients, you

must hold the PTT key as long as you talk. To listen to the response, release the

PTT key.

You may be able to check the login status of your contacts in Menu > Push to

talk > Contacts list. This service depends on your network operator and is only

available for subscribed contacts. To subscribe a contact, select

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

Options >Subscribe contact, or if one or more contacts are already marked

Subscribe marked.

indicate that the person is either available or unknown.

indicates that the person wants not to be disturbed, but can receive callback

requests.

indicates that the person does not have PTT switched on.

Make a channel call

To call a channel, select Channel list, the desired channel, and press and hold the

PTT key.

Make a one-to-one call

To start a one-to-one call from the list of contacts, select Contacts > Names or

Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the

PTT key.

To start a one-to-one call from the list of PTT channels, select Channel list, the

desired channel, and Members. Scroll to the desired contact, and press and hold

the PTT key.

To start a one-to-one call from the list of callback requests you have received,

select Callback inbox. Scroll to the desired nickname, and press and hold the PTT

key.

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients receive

an incoming call and need to accept the call in order to participate. If supported

by your network operator, you also may select contacts with a phone number but

without PTT number. For details, contact your network operator.

1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.

2. Press and hold the PTT key to start the call. The participating contacts are

shown on the display, as soon as they join the call.

3. Press and hold the PTT key to talk to them. Release the PTT key to hear the

response.

4. Press the end key to terminate the call.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

Receive a PTT call

A short tone notifies you of an incoming PTT call. Information, such as the

channel, the phone number, or the nickname (network service) of the caller are

displayed.

You can either accept or reject an incoming one-to-one call if you have set the

device to first notify you of the one-to-one calls.

When you press and hold the PTT key while the caller is talking, you hear a

queuing tone, and Queuing is displayed. Press and hold the PTT key, and wait for

the other person to finish; then you can talk immediately.

■ Callback requests

If you make a one-to-one call and do not get a response, you can send a request

for the person to call you back.

Send a callback request

You can send a callback request in the following ways:

To send a callback request from the contacts list in the Push to talk menu, select

Contacts list. Scroll to a contact, and select Options > Send PTT callback.

To send a callback request from Contacts, search for the desired contact, and

select Details. Scroll to the PTT address, and select Options > Send PTT callback.

To send a callback request from the channel list in the PTT menu, select Channel

list, and scroll to the desired channel. Select Members, scroll to the desired

contact, and select Options > Send PTT callback.

To send a callback request from the callback request list in the Push to talk menu,

select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.

Respond to a callback request

When someone sends you a callback request, Callback request received is

displayed in the standby mode.

To open the Callback inbox, select View. The list of nicknames of the persons who

have sent you callback requests is shown.

To make a one-to-one call, select the desired request and press and hold the PTT

key.

To send a call request back to the sender, select Options > Send PTT callback.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P u s h t o t a l k

To delete the request, select Delete.

To save a new contact or to add the PTT address to a contact from a received

callback request, select Options > Save as or Add to contact.

■ Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in

the following ways:

To add a PTT address to a name in Contacts, search for the desired contact, select

Details > Options > Add detail > PTT address. A contact will only appear in the

PTT contact list, if the PTT address is entered.

To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts

list > Options > Add contact.

To add a contact from the channel list, connect to the PTT service, select Channel

list, and scroll to the desired channel. Select Members, scroll to the member

whose contact information you want to save, and select Options. To add a new

contact, select Save as. To add a PTT address to a name in Contacts, select Add to

contact.

■ PTT settings

Select Menu >Push to talk > PTT settings.

1 to 1 calls > On — to set the device to receive incoming calls. To make but not

receive one-to-one calls, select Off. The service provider may offer some services

that override these settings. To set the device to notify you first of incoming

one-to-one calls with a ringing tone, select Notify.

PTT key default function — to set the function to be performed when you press

and hold the PTT key.

Show my login status — to send my login status to others.

PTT status in startup > Yes or Ask first— to automatically connect to the PTT

service

Push to talk when roaming — to specify whether to allow PTT service outside your

home network.

Send my PTT address > No — to send or hide your address from others

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A p p l i c a t i o n s

■ Configuration settings

You may receive the settings for connecting to the service from your service

provider. See Configuration settings service p. 8. You can enter the settings

manually. See Configuration p. 50.

To select the settings for connecting to the service, select Menu > Push to talk >

Configuration settings. Select from the following options:

Configuration — to select a service provider.

Account — to select a PTT service account in the active configuration settings

Other parameters are PTT user name, Default nickname, PTT password, Domain,

and Server address.

To access the internet site of your PTT provider, select Menu > Push to talk >

Web.

13. Applications

In this menu you can manage applications and games. These files are

stored in the device memory or an attached microSD memory card and may be

arranged in folders.

For options to format or lock and unlock the memory card see Memory card p. 53.

To launch a game, select Menu > Applications > Games, the desired game, and

Open.

To launch an application, select Menu > Applications > Collection, an

application, and Open.

The following application options are available:

Update version — to check whether a new version of the application is available

for download from Web (network service)

Web page — to provide further information for the application from an Internet

page (network service), if available

App. access — to restrict the application from accessing the network

Your device supports J2ME Java applications. Make sure that the application is

compatible with your device before downloading it. You can download new Java

applications and games in different ways.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

S I M s e r v i c e s

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

To download an application, use the Nokia Application Installer from PC Suite, or

select Menu > Applications > Options > Downloads > App. downloads; the list

of available bookmarks is shown. See Bookmarks p. 69.

For the availability of different services and pricing contact your service provider.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

internet site.

14. SIM services

Your SIM card may provide additional services. You can access

this menu only if it is supported by your SIM card. The name and contents of the

menu depend on the available services.

For availability and information on using SIM card services, contact your SIM

card vendor. This may be the service provider, network operator, or other vendor.

To set the device to show you the confirmation messages sent between your

device and the network when you are using the SIM services, select Menu >

Settings > Phone > Confirm SIM service actions > Yes.

Accessing these services may involve sending messages or making a phone call

for which you may be charged.

15. Web

You can access various mobile internet services with your device

browser.

Important: Use only services that you trust and that offer adequate

security and protection against harmful software.

Check the availability of these services, pricing, and instructions with your

service provider.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W e b

With the browser you can view the services that use wireless markup language

(WML) or extensible hypertext markup language (XHTML) on their pages.

Appearance may vary due to screen size. You may not be able to view all details

of the internet pages.

■ Set up browsing

You may receive the configuration settings required for browsing as a

configuration message from your service provider. See Configuration settings

service p. 8. You can also enter all the configuration settings manually. See

Configuration p. 50.

■ Connect to a service

Ensure that the correct configuration settings of the service are activated.

1. To select the settings for connecting to the service, select Menu > Web >

Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service

are shown. Select a service provider, Default, or Personal config. for browsing.

See Set up browsing p. 68.

3. Select Account and a browsing service account contained in the active

configuration settings.

4. Select Display terminal window > Yes to perform manual user authentication

for intranet connections.

Make a connection to the service in one of the following ways:

•

Select Menu > Web > Home; or in the standby mode, press and hold 0.

To select a bookmark of the service, select Menu > Web > Bookmarks.

To select the last URL, select Menu > Web > Last web address.

To enter the address of the service, select Menu > Web > Go to address. Enter

the address of the service, and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its pages. The

function of the keys may vary in different services. Follow the text guides on the

device display. For more information, contact your service provider.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W e b

To browse through the page, scroll in any direction.

To select an item, press the call key, or select Select.

To enter letters and numbers, press the 0 to 9 keys. To enter special characters,

press *.

While browsing, you can make a phone call, and save a name and a phone

number from a page.

■ Bookmarks

You can save page addresses as bookmarks in the device memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select

Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it, or press the call key to make a connection

to the page associated with the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; to create a new

bookmark; or to save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

internet site.

When you receive a bookmark that is sent as a bookmark, 1 bookmark received is

displayed. To view the bookmark, select Show.

■ Appearance settings

While browsing, select Options > Other options > Appear. settings; or in the

standby mode, select Menu > Web > Settings > Appearance settings and from

the following options:

Text wrapping — to select how the text shall appear on the display

Font size — to set the font size

Show images > No — to hide images on the page

Alerts > Alert for unsecure connection > Yes — to set the device to alert when a

secure connection changes to an unsecure one during browsing

Alerts > Alert for unsecure items > Yes — to set the device to alert when a secure

page contains an unsecure item. These alerts do not guarantee a secure

connection. For more information, see Browser security p. 71.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W e b

Character encoding > Content encoding — to select the encoding for the browser

page content

Character encoding > Unicode (UTF-8) web addresses > On — to set the device to

send a URL as a UTF-8 encoding

Screen size > Full or Small— to set the screen layout

Show page title > Yes or No— to display the title of the web page

JavaScript > Enable — to enable the Java scripts

■ Security settings

A cookie is data that a site saves in the cache memory of your device. Cookies are

saved until you clear the cache memory. See Cache memory p. 71.

While browsing, select Options > Other options > Security > Cookie settings; or

in the standby mode, select Menu > Web > Settings > Security settings >

Cookies. To allow or prevent the device from receiving cookies, select Allow or

Reject.

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The

device supports WML scripts.

While browsing, to allow the scripts, select Options > Other options > Security >

WMLScript sett.; or in the standby mode, select Menu > Web > Settings >

Security settings > WMLScripts over secure connection > Allow.

■ Download settings

To automatically save all downloaded files in Gallery, select Menu > Web >

Settings > Downloading settings > Automatic saving > On.

■ Service inbox

The device is able to receive service messages sent by your service provider

(network service). Service messages are notifications (for example, news

headlines), and they may contain a text message or an address of a service.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W e b

To access the Service inbox in the standby mode, when you have received a

service message, select Show. If you select Exit, the message is moved to the

Service inbox. To access the Service inbox later, select Menu > Web > Service

inbox.

To access the Service inbox while browsing, select Options > Other options >

Service inbox. Scroll to the message you want, and to activate the browser and

download the marked content, select Retrieve. To display detailed information on

the service notification or to delete the message, select Options > Details or

Delete.

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service messages, select Service messages >

On or Off.

To set the device to receive service messages only from content authors approved

by the service provider, select Message filter > On. To view the list of the

approved content authors, select Trusted channels.

To set the device to automatically activate the browser from the standby mode

when the device receives a service message, select Automatic connection > On. If

you select Off, the device activates the browser only after you select Retrieve

when the device has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed is

stored in the cache.

To empty the cache while browsing, select Options > Other options > Clear the

cache; in the standby mode, select Menu > Web > Clear the cache.

■ Browser security

Security features may be required for some services, such as online banking or

shopping. For such connections you need security certificates and possibly a

security module, which may be available on your SIM card. For more information,

contact your service provider.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

W e b

Security module

The security module improves security services for applications requiring a

browser connection, and allows you to use a digital signature. The security

module may contain certificates as well as private and public keys. The

certificates are saved in the security module by the service provider.

To view or change the security module settings, select Menu > Settings >

Security > Security module settings.

Certificates

Important: Even if the use of certificates makes the risks involved in

remote connections and software installation considerably smaller,

they must be used correctly in order to benefit from increased security.

The existence of a certificate does not offer any protection by itself; the

certificate manager must contain correct, authentic, or trusted certificates for

increased security to be available. Certificates have a restricted lifetime. If

Expired certificate or Certificate not valid yet is shown even if the certificate

should be valid, check that the current date and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust

the owner of the certificate and that the certificate really belongs to the listed

owner.

There are three kinds of certificates: server certificates, authority certificates, and

user certificates. You may receive these certificates from your service provider.

Authority certificates and user certificates may also be saved in the security

module by the service provider.

To view the list of the authority or user certificates downloaded into your device,

select Menu > Settings > Security > Authority certificates or User certificates.

is displayed during a connection, if the data transmission between the

device and the content server is encrypted.

The security icon does not indicate that the data transmission between the

gateway and the content server (or place where the requested resource is stored)

is secure. The service provider secures the data transmission between the

gateway and the content server.

Digital signature

You can make digital signatures with your device if your SIM card has a security

module. Using the digital signature can be the same as signing your name to a

paper bill, contract, or other document.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

P C c o n n e c t i v i t y

To make a digital signature, select a link on a page, for example, the title of the

book you want to buy and its price. The text to sign, which may include the

amount and date, is shown.

Check that the header text is Read and that the digital signature icon

shown.

If the digital signature icon does not appear, there is a security breach, and you

should not enter any personal data such as your signing PIN.

To sign the text, read all of the text first, and select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll through

and read all of the text before signing.

Select the user certificate you want to use. Enter the signing PIN. The digital

signature icon disappears, and the service may display a confirmation of your

purchase.

16. PC connectivity

You can send and receive e-mail, and access the Internet when your device is

connected to a compatible PC through a Bluetooth or a data cable connection.

You can use your device with a variety of PC connectivity and data

communications applications.

■ Nokia PC Suite

With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do

notes between your device and the compatible PC or a remote internet server

(network service). You may find more information and PC Suite on the Nokia

website at www.nokia.com/support or your local Nokia website.

■ Packet data, HSCSD, and CSD

With your device you can use the packet data, high-speed circuit switched data

(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability

and subscription to data services, contact your network operator or service

provider. See Modem settings p. 46.

The use of HSCSD services consumes the device battery faster than normal voice

or data calls.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

B a t t e r y i n f o r m a t i o n

■ Bluetooth

Use the Bluetooth technology to connect your compatible PC to the internet.

Your device must have activated a service provider that supports internet access

and your PC has to support Bluetooth PAN (personal area network). After

connecting to the network access point (NAP) service of the device and pairing

with your PC your device automatically opens a packet data connection to the

internet. PC Suite software installation is not necessary when using the NAP

service of the device.

See Bluetooth wireless technology p. 44.

■ Data communication applications

For information on using a data communication application, refer to the

documentation provided with it.

Making or answering phone calls during a computer connection is not

recommended, as it might disrupt the operation.

For better performance during data calls, place the device on a stationary surface

with the keypad facing downward. Do not move the device by holding it in your

hand during a data call.

17. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times, but it will

eventually wear out. When the talk and standby times are noticeably shorter

than normal, replace the battery. Use only Nokia approved batteries, and

recharge your battery only with Nokia approved chargers designated for this

device.

If a replacement battery is being used for the first time or if the battery has not

been used for a prolonged period, it may be necessary to connect the charger and

then disconnect and reconnect it to start the charging.

Unplug the charger from the electrical plug and the device when not in use. Do

not leave fully charged battery connected to a charger, since overcharging may

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

B a t t e r y i n f o r m a t i o n

shorten its lifetime. If left unused, a fully charged battery will lose its charge over

time.

If the battery is completely discharged, it may take a few minutes before the

charging indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery

that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the

positive (+) and negative (-) terminals of the battery. (These look like metal strips

on the battery.) This might happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuiting the terminals may damage the battery

or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also

explode if damaged. Dispose of batteries according to local regulations. Please

recycle when possible. Do not dispose as household waste.

■ Nokia battery authentication

Always use original Nokia batteries for your safety. To check that you are getting

an original Nokia battery, purchase it from an authorized Nokia dealer, look for

the Nokia Original Enhancements logo on the packaging, and inspect the

hologram label using the following steps:

Successful completion of the four steps is not a total assurance of the

authenticity of the battery. If you have any reason to believe that your battery is

not an authentic original Nokia battery, you should refrain from using it, and take

it to the nearest authorized Nokia service point or dealer for assistance. Your

authorized Nokia service point or dealer will inspect the battery for authenticity.

If authenticity cannot be verified, return the battery to the place of purchase.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

B a t t e r y i n f o r m a t i o n

Authenticate hologram

1. When looking at the hologram on the label, you

should see the Nokia connecting hands symbol from

one angle and the Nokia Original Enhancements

logo when looking from another angle.

2. When you angle the hologram left, right, down, and

up, you should see 1, 2, 3, and 4 dots on each side

respectively.

3. Scratch the side of the label to reveal a 20-digit

code, for example, 12345678919876543210. Turn

the battery so that the numbers are facing upwards.

The 20-digit code reads starting from the number at

the top row followed by the bottom row.

4. Confirm that the 20-digit code is valid by following

the instructions at www.nokia.com/batterycheck.

To create a text message enter the 20-digit code, for

example, 12345678919876543210, and send to +44

7786 200276.

To create a text message,

•

For countries in Asia Pacific, excluding India: Enter the 20-digit code, for

example, 12345678919876543210, and send to +61 427151515.

•

For India only: Enter Battery followed by the 20-digit battery code, for

example, Battery 12345678919876543210, and send to 5555.

National and international operator charges will apply.

You should receive a message indicating whether the code can be authenticated.

What if your battery is not authentic?

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

B a t t e r y i n f o r m a t i o n

If you cannot confirm that your Nokia battery with the hologram on the label is

an authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

C a r e a n d m a i n t e n a n c e

Care and maintenance

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage.

•

Keep the device dry. Precipitation, humidity and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery and allow the device to dry

completely before replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

Do not touch the main display with hard or angular materials. Objects like

earrings or jewelry may scratch the display.

Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

•

Use chargers indoors.

Always create a backup of data you want to keep (such as contacts and

calendar notes) before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the

reach of small children.

■ Operating environment

Remember to follow any special regulations in force in any area, and always

switch off your device when its use is prohibited or when it may cause

interference or danger. Use the device only in its normal operating positions. This

device meets RF exposure guidelines when used either in the normal use position

against the ear or when positioned at least 2.2 centimeters (5/8 inch) away from

the body. When a carry case, belt clip or holder is used for body-worn operation,

it should not contain metal and should position the device the above-stated

distance from your body.

To transmit data files or messages, this device requires a quality connection to

the network. In some cases, transmission of data files or messages may be

delayed until such a connection is available. Ensure that the above separation

distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the

device. Do not place credit cards or other magnetic storage media near the

device, because information stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless devices, may

interfere with the functionality of inadequately protected medical devices.

Consult a physician or the manufacturer of the medical device to determine if

they are adequately shielded from external RF energy or if you have any

questions. Switch off your device in health care facilities when any regulations

posted in these areas instruct you to do so. Hospitals or health care facilities may

be using equipment that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of

15.3 centimeters (6 inches) be maintained between a wireless device and a

pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and

recommendations of Wireless Technology Research. Persons with pacemakers

should do the following:

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A d d i t i o n a l s a f e t y i n f o r m a t i o n

•

Always keep the device more than 15.3 centimeters (6 inches) from the

pacemaker

•

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to minimize the potential

for interference.

If you suspect interference, switch off your device, and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If

interference occurs, consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, and air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a

vehicle. Faulty installation or service may be dangerous and may invalidate any

warranty that may apply to the device. Check regularly that all wireless device

equipment in your vehicle is mounted and operating properly. Do not store or

carry flammable liquids, gases, or explosive materials in the same compartment

as the device, its parts, or enhancements. For vehicles equipped with an air bag,

remember that air bags inflate with great force. Do not place objects, including

installed or portable wireless equipment in the area over the air bag or in the air

bag deployment area. If in-vehicle wireless equipment is improperly installed and

the air bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device

before boarding an aircraft. The use of wireless devices in an aircraft may be

dangerous to the operation of the aircraft, disrupt the wireless telephone

network, and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include

areas where you would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or

even death. Switch off the device at refueling points such as near gas pumps at

service stations. Observe restrictions on the use of radio equipment in fuel

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A d d i t i o n a l s a f e t y i n f o r m a t i o n

depots, storage, and distribution areas; chemical plants; or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include below deck on boats, chemical

transfer or storage facilities and areas where the air contains chemicals or

particles such as grain, dust, or metal powders. You should check with the

manufacturers of vehicles using liquefied petroleum gas (such as propane or

butane) to determine if this device can be safely used in their vicinity.

■ Emergency calls

Important: Wireless devices, including this device, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the

device.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Enter the official emergency number for your present location. Emergency

numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. If the device is in the offline or flight mode, you

must change the profile to activate the device function before you can make an

emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately

as possible. Your wireless device may be the only means of communication at the

scene of an accident. Do not end the call until given permission to do so.

■ Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves

Your mobile device is a radio transmitter and receiver. It is designed not to

exceed the limits for exposure to radio waves recommended by international

guidelines. These guidelines were developed by the independent scientific

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A d d i t i o n a l s a f e t y i n f o r m a t i o n

organization ICNIRP and include safety margins designed to assure the

protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known

as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP

guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests

for SAR are conducted using standard operating positions with the device

transmitting at its highest certified power level in all tested frequency bands. The

actual SAR level of an operating device can be below the maximum value

because the device is designed to use only the power required to reach the

network. That amount changes depending on a number of factors such as how

close you are to a network base station. The highest SAR value under the ICNIRP

guidelines for use of the device at the ear is x.xx W/kg.

Use of device accessories and enhancements may result in different SAR values.

SAR values may vary depending on national reporting and testing requirements

and the network band. Additional SAR information may be provided under

product information at www.nokia.com.

Your mobile device is also designed to meet the requirements for exposure to

radio waves established by the Federal Communications Commission (USA) and

Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported under this standard during

product certification for use at the ear is 1.20 W/kg and when properly worn on

the body is 0.72 W/kg. Information about this device model can be found at http:/

/www.fcc.gov/oet/fccid b y searching t he equipment authorization system using

FCC ID: QMNRM-277.

■ Technical information

Dimensions: Width 1.74 inches (44.3 mm), Length 3.92 inches (99.6 mm), Depth

0.81 inch (20.5 mm)

Weight: < 3.70 ounces (98 g) with BL-5C Li-Ion Battery

Wireless networks: 850/1900 MHz WCDMA; 850/900/1800/1900 MHz GSM

Frequency range (Tx): 850: 824–849 MHz; 900: 880.0–915.0 MHz;

1800: 1710.0–1785.0 MHz; 1900: 1850.0–1910.0 MHz

Frequency range (Rx): 850: 869.0–894.0 MHz; 900: 925.0–960.0 MHz;

1800: 1805.0–1880.0MHz; 1900: 1930.0–1990.0 MHz

Bluetooth: 2402.0 - 2480.0 MHz

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

A d d i t i o n a l s a f e t y i n f o r m a t i o n

■ Battery information

This section provides information about battery charging times with the standard

charger (AC-3), talk-times, and standby times. Be aware that the information in

this section is subject to change. For more information, contact your service

provider.

Charging times

The following charging times are approximate:

Standard charger (AC-3): up to 2 hours 15 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, device use,

network conditions, features used, battery age and condition (including charging

habits), temperatures to which the battery is exposed, and many other factors.

Talk time: up to 3 hours

Standby time: up to 13 days in UMTS mode.

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Index

charger

times 83

access codes 20

clock settings 43

codes 20 , 21

accessories. See enhancements.

activation keys 51

active standby 18, 42

alarm clock 57

configuration 50

s ett ing service 8

settings 14

antenna 14

contact information 9

contacts 38, 39, 40, 41

cookies 70

applications

audio messages 28

countdown timer 60

customer service 9

barring password 21

battery

authentication 75

charging 12

data

charging times 83

charging, discharging 74

information 83

installation 9

digital rights management 51

digital signa ture 72

dis play 17 , 18

talk and standby times 83

blacklist 31

Bluetooth 44, 74

bookmarks 69

browser 68, 69, 70

business cards 40

downloading files 51

downloads 8 , 70

EGPRS 45

cache memory 71

calculator 59

calendar 58

call

e-mail application 29

emergency calls 81

end

call 21

functions 21

log 41

enhancements 7, 49

equalizer 57

explosive environments 80

options 23

settings 48

waiting 23

call register. See call log.

calls 21, 22

camera

factory settings 52

flash messages 27

font size 42

effects 54

filter 54

settings 54

take an image 54

certificates 72

character case 23

charge the battery 12

gallery 52

games 66

GPRS 45

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

handsfree. See loudspeaker.

hearing aid 50, 80

navigation 17

network

name on display 17, 18

services 6

network mode 17, 18

Nokia contact information 9

notes 58 , 59

image 54

IMAP4 29

indicators 18

installation

battery 9

numbers 41

SIM card 9

instant messaging 31

internet 67

offline mode 20

organizer 57

overview functions 8

junk folder 31

pacemakers 79

packet data 45, 73

parts 16

keyguard 20

keypad lock 20

keys 20

PC connectiv it y 73

PC Suite 73

phone

configura tion 50

keys 16

open 1 3

language settings 48

lights 49

p arts 16

settings 48

log 41

phone lock. See keypad lock.

PictBridge 47

PIN codes 13, 21

plug and play service 14

POP3 29

loudspeaker 23

main display 18, 42

maintenance 78

predictive text input 24

profiles 41

memory card 53

protected files 51

PTT 60

menu 17

message center number 25

message settings 35, 36, 37

messages

PUK codes 21

Push to talk. See PTT.

pushed messages 70

audio message 28

flash message 27

length indicator 25

message settings 35

text 25

recorder 56

ringing tones 42

voice message 34

mini display 17, 43

MMS. See multimedia messages.

multimedia messages 26

music player 55

safety information 5, 79

SAR 81

scrolling 17

security

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

codes 20

time 83

module 72

settings 50

standby mode 17 , 43

status indicators 17 , 18

stopwatch 60

service

inbox 70

strap 15

messages 70

numbers 41

switch on and off 13

swivel 42

services 67

settings

synchronisation 46

active standby 42

call 48

take an image 54

talk time 83

camera 54

clock 43

technical information 8 2

text 23 , 24 , 25

text message 25

themes 42

configuration 50

connectivity 44

data transfer 46

date 43

time settings 43

to-do list 59

downloads 70

enhancements 49

fold animation 42

GPRS, EGPRS 45

main display 42

messages 35

mini display 43

my shortcuts 43

phone 48

profiles 41

PTT 65

PTT configuration 66

restore factory settings 52

security 50

tones 42

traditional text input 25

unlock keypa d 20

UPIN 13

vehicles 80

voice

commands 43

dialing 22

messages 34

recorder 56

service inbox 71

themes 42

time 43

tones 42

USB data cable 47

wallpaper 42

shared memory 7

shortcuts 43

wallpaper 42

Web 67, 68

signal strength 17, 18

SIM

wireless markup language 68

wrist strap 15

card 20

card installation 9

services 67

write text 23

SMS. See text messages

spam filter 31

speed dialing 22, 40

standby

XHTML 68

^{Download from W}M^wwo^.Sd^oe^ml ^a3ⁿ5^u5^al5^s.c^com-^.2^Al3^{l M}A^ap^nur^ail^ls2^S0^e0^a7^{rch And Download.}

Moxa Technologies Server 5410 User Manual
Multiquip Marine Safety Devices DCA 25SSAI User Manual
Napoleon Fireplaces Indoor Fireplace ZCVF36 User Manual
NEC Server ND 91649 User Manual
NextBase Portable DVD Player SDV685 AM User Manual
Nokia TV Receiver 9802 S User Manual
NorthStar Navigation Marine GPS System 800 628 4487 User Manual
Numark Industries Musical Toy Instrument N WAVE 360 User Manual
NuTone Ventilation Hood NS130BL User Manual
Oregon Scientific Weather Radio BAR988HG User Manual