Step 2:
Step 3:
Step 1:
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet port
on your router.
Plug in, then turn on your modem.
Unplug the power
to turn off your modem.
Installation Guide
Wait approximately two minutes
until your modem turns on.
N300 Wireless Router
JWNR2010v3
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.
Internet
Package Contents
DSL
or Cable
Modem
N300 Wireless Router
(not included)
N300 Wireless Router
Step 5:
Step 4:
Step 6:
Connect the router
to your computer.
Open a browser.
Connect the power adapter to the
router, plug the power adapter into
and outlet, and press the
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
If the web page does not display,
close and reopen the browser
and enter http://routerlogin.net
in the address bar. The user name
and password are on the
Power On/Off button on the router.
Wait until the Wireless LED
solid green.
Power adapter
Ethernet cable
turns
Optionally, connect wirelessly by using the
preset wireless security settings
located on the product label on the router.
product label on the router.
Download from Www.Somanuals.com. All Manuals Search And Download.
|