OperatiOn and parts Manual
MOdel gac2.2h
pOrtable generatOr
(hOnda gX160 gasOline engine)
Revision #1 (03/31/10)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
parts Ordering prOcedures
Ordering parts has never been easier!
choose from three easy options:
Effective:
January 1st, 2006
Best deal!
Order via internet (dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
I View Parts Diagrams
I Order Parts
I Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (dealers Only):
All customers are welcome to order parts via Fax.
domestic (us) customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
domestic (us) dealers call:
Order via phone:
1-800-427-1244
Non-dealer customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
when ordering parts, please supply:
Ì
dealer account Number
Ì
specify preferred method of shipment:
Ì
Ì
Ì
Ì
Ì
dealer Name and address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
I
I
Priority One
Ground
shipping address (if different than billing address)
Return Fax Number
I Next Day
Second/Third Day
applicable model Number
I
Quantity, part Number and description of each part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
We accepT all maJOR cRediT caRds!
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
Do not operate or service the equipment before reading the
entire manual. Safety precautions should be followed at all
times when operating this equipment. Failure to read and
understand the safety messages and operating instructions
could result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
saFeTY messages
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
daNgeR,WaRNiNg, cauTiON or NOTice.
saFeTY sYmBOls
daNgeR
Indicates a hazardous situation which, if not avoided,
Will result in deaTH or seRiOus iNJuRY.
WaRNiNg
Indicates a hazardous situation which, if not avoided,
cOuld result in deaTH or seRiOus iNJuRY.
cauTiON
Indicates a hazardous situation which, if not avoided,
cOuld result in miNOR or mOdeRaTe iNJuRY.
NOTICE
Addresses practices not related to personal injury.
page 4 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
„ NeveR use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
geNeRal saFeTY
cauTiON
„ NeveR operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
„ alWaYs know the location of the nearest
fire extinguisher.
„ alWaYs know the location of the nearest
first aid kit.
„ alWaYs know the location of the nearest
phone or keep a phone on the job site. Also, know the
phone numbers of the nearest ambulance, doctor and
fire department. This information will be invaluable in
the case of an emergency.
„ NeveR operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
„ NeveR operate this equipment under the influence of
drugs or alcohol.
geNeRaTOR saFeTY
daNgeR
„ NeveRoperatetheequipmentinanexplosive
atmosphereornearcombustiblematerials.An
explosion or fire could result causing severe
bodily harm or even death.
„ alWaYs check the equipment for loosened threads or
bolts before starting.
„ dO NOT use the equipment for any purpose other than
its intended purposes or applications.
WaRNiNg
„ NeveR disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death.Disconnection of any of these
devices will void all warranties.
NOTICE
„ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
cauTiON
„ Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
„ NeveR lubricate components or attempt service on a
running machine.
NOTICE
„ alWaYs ensure generator is on level ground before use.
„ alWaYs keep the machine in proper running condition.
„ Fix damage to machine and replace any broken parts
immediately.
„ alWaYs store equipment properly when it is not being
used.Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
eNgiNe saFeTY
to prevent accidental discharge of sparks or flames
from the engine exhaust. Spark arresters are qualified
and rated by the United States Forest Service for this
purpose. In order to comply with local laws regarding
spark arresters, consult the engine distributor or the
local Health and Safety Administrator.
daNgeR
„ The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
„ The engine of this equipment
requires an adequate free
flow of cooling air. NeveR
Fuel saFeTY
daNgeR
operate this equipment in
any enclosed or narrow area
where free flow of the air is
restricted. If the air flow is
„ dO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
restricted it will cause injury to people and property and
serious damage to the equipment or engine.
WaRNiNg
„ NeveR operate the engine with heat shields or
guards removed.
„ dO NOT remove the engine oil drain plug while
the engine is hot. Hot oil will gush out of the engine
crankcase and severely scald any persons in the general
area of the generator.
cauTiON
„ NeveR touch the hot exhaust manifold,
muffler or cylinder.Allow these parts to cool
before servicing equipment.
„ dO NOT start the engine near spilled fuel or combustible
fluids. Diesel fuel is extremely flammable and its vapors
can cause an explosion if ignited.
NOTICE
„ NeveR run engine without an air filter or with a dirty air
filter.Severe engine damage may occur.Service air filter
frequently to prevent engine malfunction.
„ alWaYs refuel in a well-ventilated area, away from
sparks and open flames.
„ NeveR tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
„ alWaYs use extreme caution when working with
flammable liquids.
„ dO NOT fill the fuel tank while the engine is running
or hot.
„ dO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
„ State Health Safety Codes and Public Resources
Codes specify that in certain locations, spark arresters
must be used on internal combustion engines that use
hydrocarbon fuels.A spark arrester is a device designed
„ Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
page 6 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
„ NeveR use fuel as a cleaning agent.
„ Make sure power cables are securely connected to the
generator’s output receptacles. Incorrect connections
may cause electrical shock and damage to the
generator.
„ dO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
NOTICE
„ alWaYs make certain that proper power or extension
cord has been selected for the job. See Cable Selection
Chart in this manual.
elecTRical saFeTY
daNgeR
„ Turn generator and all circuit breakers OFF before
performing maintenance on the generator or making
contact with output receptacles.
grounding safety
daNgeR
„ alWaYs make sure that electrical circuits are properly
grounded to a suitable earth ground (ground rod) per
the National Electrical Code (NEC) and local codes
before operating generator. severe injury or death by
electrocution can result from operating an ungrounded
generator.
„ NeveR insert any objects into the
output receptacles during operation.
This is extremely dangerous. The
possibility exists of electrical shock,
electrocution or death.
„ Backfeed to a utility system can cause
electrocution and/or property damage.
NeveR connect the generator to a
building’s electrical system without
a transfer switch or other approved
device. All installations should be
performed by a licensed electrician in accordance with
all applicable laws and electrical codes. Failure to do so
could result in electrical shock or burn, causing serious
injury or even death.
„ NeveR use gas piping as an electrical ground.
BaTTeRY saFeTY (elecTRic sTaRT ONlY)
daNgeR
„ dO NOT drop the battery.There is a possibility that the
battery will explode.
„ dO NOT expose the battery to open flames,
sparks, cigarettes, etc.The battery contains
combustible gases and liquids. If these
gases and liquids come into contact with a
flame or spark, an explosion could occur.
power cord/cable safety
daNgeR
„ dO NOT charge battery if frozen. Battery can explode.
When frozen, warm the battery to at least 61°F (16°C).
„ NeveR let power cords or cables lay in water.
„ NeveR stand in water while AC power from the
generator is being transferred to a load.
WaRNiNg
„ alWaYs wear safety glasses when
handling the battery to avoid eye irritation.
The battery contains acids that can cause
injury to the eyes and skin.
„ NeveR use damaged or worn cables or cords when
connecting equipment to generator. Inspect for cuts in
the insulation.
„ NeveR grab or touch a live power
cord or cable with wet hands. The
possibility exists of electrical shock,
electrocution or death.
„ Use well-insulated gloves when picking up the battery.
„ alWaYs keep the battery charged. If the battery is not
charged, combustible gas will build up.
„ alWaYs recharge the battery in a well-ventilated
environmenttoavoidtheriskofadangerousconcentration
of combustible gasses.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
„ If the battery liquid (dilute sulfuric acid) comes into
contact with clothing or skin, rinse skin or clothing
immediately with plenty of water.
eNviRONmeNTal saFeTY
NOTICE
„ Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
„ If the battery liquid (dilute sulfuric acid) comes into
contact with eyes, rinse eyes immediately with plenty
of water and contact the nearest doctor or hospital to
seek medical attention.
„ dO NOT use food or plastic containers to
dispose of hazardous waste.
cauTiON
„ dO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
„ alWaYs disconnect the NegaTive battery terminal
before performing service on the generator.
„ alWaYs keep battery cables in good working condition.
Repair or replace all worn cables.
TRaNspORTiNg saFeTY
cauTiON
„ NeveR allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ Before lifting, make sure that the equipment parts (lifting
bail if equipped) are not damaged and screws are not
loose or missing.
„ Always make sure crane or lifitng device has been
properly secured to the lifting bail (hook) of the
equipment.
„ alWaYs shutdown engine before transporting.
„ NeveR lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of sufficient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ dO NOT lift machine to unnecessary heights.
„ alWaYs tie down equipment during transport by
securing the equipment with rope.
page 8 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtes
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
specificatiOns (generatOr)
Table 1. specifications (generators)
Model
GAC 2.2H
Type
Brushless Revolving Field Type
Excitation
Solid State, Statically Excited System
Speed
3,600 RPM
Self-Ventilation
1.8 kW
Cooling System
Continuous Power Output
Max Power Output
Rated Voltage
Current Max/Continuous (120V)
Phase
ac generator
60 Hz ac power sourc
2.2 kW
120V
15 amps
Single Phase (2 wire)
60 Hz
Frequency
Power Factor
1
dimensions
(l x W x H)
19.68 x 16.14 X 18.30 in.
(500 X 410 X 465 mm)
dry Net Weight
106 lbs. (48 kg.)
NOTICE
In keeping with Multiquip's policy of constantly
improving its products, the specifications quoted herein
are subject to change without prior notice.
page 10 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
specificatiOns (engine)
Table 2. specifications (engine)
HONda gX160K1ema2
HONda gX160u1emaN
model
4 stroke, Single Cylinder, OHV,
Gasoline Engine
Type
2.68 in. X 1.77 in.
(68 mm x 45 mm.)
Bore X Stroke
Displacement
Max Output
9.95 cu-in (163 cm3)
5.5 H.P./3600 R.P.M.
Unleaded Automobile Gasoline
3.16 gallons (12 liters)
.63 quarts (0.6 liters)
Yes
engine
Fuel
Fuel Capacity
Lube Oil Capacity
Oil Alert System
Speed Control Method
Starting Method
Centrifugal Fly-weight Type
Recoil Start
dimensions
(l x W x H)
12.0 x 14.4 X 13.2 in.
(304 X 362 X 335 mm)
dry Net Weight
33.1 lbs. (15 kg.)
effects of altitude and Heat
The maximum output of the engines listed above are applicable to supplying electrical power for continuous service at
ambient conditions in accordance with SAE Test cord J607.The above ambient conditions are at standard sea level, with
a barometric reading of 29.92 inches and a temperature of 60° F (15.5° C).
Generally, the engine's output power will decrease 3-1/2% for each 1000 feet (305 meters) of altitude above sea level, and
1% for each 10° F (-12.2° C) above the standard temperature of 60° F (15.5° C).
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
diMensiOns
NEUTRAL BONDED TO FRAME
NEUTRE MIS LA MASSE
120V
15A
120
V
GAC-2.2H
A
A
LA CARCASSE DU MOTEUR
POWERED by
AC VOLTMETER
VOLTOMETRE CA
Honda Engines
AC CIRCUIT BREAKER
INTERRUPTEUR DE
COURANT PRINCIPAL
211052
GR PRISE DE
TERRE
A21210011
18.30 IN.
(465 MM)
19.7 IN.
(500 MM)
16.1 IN.
(410 MM)
Figure 1. Dimensions
page 12 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOte
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
installatiOn
cONNecTiNgTHe gROuNd
The nut and ground terminal on the generators should
always be used to connect the generators to a suitable
ground. The ground cable should be #8 size wire
minimum.
At the generator, connect the terminal of the ground cable
between the lock washer and the nut (Figure 2) and tighten
the nut fully. Connect the other end of the ground cable to
a suitable earth ground (ground rod).
NEUTRAL BONDED TO FRAME
NEUTRE MIS LA MASSE
120V
15A
V
120
GAC-2.2H
A
A
LA CARCASSE DU MOTEUR
POWERED by
AC VOLTMETER
VOLTOMETRE CA
Honda Engines
AC CIRCUIT BREAKER
INTERRUPTEUR DE
COURANT PRINCIPAL
211052
GR PRISE DE
TERRE
A21210011
GROUND ROD
FOR EARTH
GROUND
GROUND
CABLE
#8 MINIMUM
GENERATOR
GROUND LUG
CONNECT TO
BUILDING
GROUND
IF REQUIRED
8 FT. MINIMUM
REFERENCE
NEC 250-52(C)
Figure 2. Generator Grounding
page 14 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
installatiOn
OuTdOOR iNsTallaTiON
geNeRaTOR gROuNdiNg
If possible install the generator in a area that is free of
debris, bystanders, and overhead obstructions. Make sure
the generator is on secure level ground so that it cannot
slide or shift around.
To guard against electrical shock and possible damage to
the equipment, it is important to provide a good eaRTH
ground.
Article 250 (Grounding) of the National Electrical Code
(NEC) provides guide lines for proper grounding and
specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of
cable entry as practical.
The installation site must be relatively free from moisture
and dust.All electrical equipment should be protected from
excessive moisture.Failure to do will result in deterioration
of the insulation and will result in short circuits and
grounding.
NEC articles 250-64(b) and 250-66 set the following
grounding requirements:
Foreign materials such as dust, sand, lint and abrasive
materials have a tendency to cause excessive wear to
engine and alternator parts.
1. Use one of the following wire types to connect the
generator to earth ground.
iNdOOR iNsTallaTiON
a. Copper - 10 AWG (5.3 mm2) or larger.
b. Aluminum - 8 AWG (8.4 mm2) or larger.
WaRNiNg
2. When grounding the generator (Figure 2) connect the
ground cable between the lock washer and the nut on
the generator and tighten the nut fully. Connect the
other end of the ground cable to earth ground.
Pay close attention to ventilation when
operating the generator inside tunnels
and caves. The engine exhaust contains
noxious elements. Engine exhaust must
be routed to a ventilated area
3. NEC article 250-52(c) specifies that the earth ground rod
should be buried a minimum of 8 ft. into the ground.
NOTICE
Exhaust gases from gas engines are extremely poisonous.
Whenever an engine is installed indoors the exhaust
fumes must be vented to the outside. The engine should
be installed at least two feet from any outside wall. Using
an exhaust pipe which is too long or too small can cause
excessive back pressure which will cause the engine to
heat excessively and possibly burn the valves.
When connecting the generator to any buildings
electrical system alWaYs consult with a licensed
electrician.
placemeNT
The generators should always be placed on a flat level
surface when it is running. DO NOT place the generator
on slopes, the possibility exists that the generator could
slide.
daNgeR
An electric shock is apt to happen when
vibrators are used. Pay close attention to
handling when operating vibrators and
always use rubber boots and gloves to
insulate the body from a short circuit.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
general infOrMatiOn
gac2.2H FamiliaRizaTiON
daNgeR
generator
Before connecting this generator to any building’s
electrical system, a licensed electrician must install an
isolation (transfer) switch.
The Multiquip GAC2.2H generator has been designed as
a portable dual purpose power source for 60 Hz (single
phase) lighting facilities, power tools, submersible pumps
and other industrial and construction machinery.
Serious injury or death may result without this transfer
switch.
This generator is mounted on rubber vibration isolators
that have a steel base backplate which is attached to the
protective steel pipe carrying frame.The protective carrying
frame is made of steel tubing and fully wraps around the
generators to protect against damage. See Figures 3, and
4 for the basic controls and indicators for the generator.
This portable generator is supplied with a electrical control
box.To reduce vibration caused by the engine, the control
box is also placed on rubber isolators.
control Box
The control box is provided with the following:
„ 120V GFCI receptacle.
„ 15 Amp Main Circuit Breaker.
„ AC Voltmeter
„ Ground Terminal
page 16 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
cOMpOnents (generatOr)
1
2
NEUTRAL BONDED TO FRAME
NEUTRE MIS LA MASSE
120V
15A
V
120
GAC-2.2H
A
A
LA CARCASSE DU MOTEUR
POWERED by
AC VOLTMETER
VOLTOMETRE CA
Honda Engines
3
AC CIRCUIT BREAKER
INTERRUPTEUR DE
COURANT PRINCIPAL
211052
GR PRISE DE
TERRE
A21210011
7
6
5
4
Figure 3. Generator Components
1. gFci duplex Receptacle – NEMA 5-15R, GFCI
receptacle will provide 120V @ 15 amps.
5. chassis ground – This ground connection point
should be connected to a good earth ground (ground
rod).
2. ac-voltmeter – Indicates (with a mark) the rated 60 Hz
(single-phase) output voltage.In addition the voltmeter
can also be used as a diagnostic tool. If the voltmeter
indicator (needle) is below the rated voltage, engine
problems may exist (low/high RPM's).
6. engine ON/OFF switch – Use this switch to start and
stop the engine. Place switch in ON position to start
engine, to stop engine place switch in OFF position.
7. gFci ground – GFCI ground connection point.
To prevent damage to the generator or power tools
due to low output voltage, turn the generator OFF and
consult your authorized Multiquip service dealer.
3. main Breaker – single-pole, 15 amp circuit breaker
protects the generator from short circuiting or
overloading.When starting the generator always have
circuit breaker placed in the OFF position.
4. engine Oil Filler cap – Remove cap/dipstick when
the adding of engine oil is required. See Table 4 for
recommended type engine oil.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
cOMpOnents (generatOr)
Figure 4. Generator Components (Continued)
8. muffler/Heat shield – Used to reduce noise and
emissions. NeveR touch this heat shield when the
generator/welder is in use.Always allow time for engine
to cool before servicing.
14. Throttle lever – Regulates engine speed.
15. engine – This generator uses a 5.0 HP Honda air-
cooled, 4-stroke, single cylinder, overhead camshaft
gasoline engine. Engine uses unleaded gasoline.
9. air cleaner – Prevents dirt and other debris from
entering the fuel system.Remove wing-nut on top of air
filter cannister to gain access to filter element. NeveR
run the engine without an air cleaner.
16. engine Oil drain plug – Remove this plug to drain
engine oil from the crankcase.
17. Recoil starter (pull rope) – Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.
10. spark plug – Provides spark to the ignition system.
Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch)
Clean spark plug once a week.
18. FuelTank – Fuel tank capacity is 3.16 gallons (12 liters)
11. Fuel Tank cap – Remove cap to add unleaded
gasoline to the fuel tank.Replenish with clean unleaded
gasoline. Make sure cap is tightened securely. dO
NOT over fill.
19. Fuel gauge – This gauge is located on top of the fuel
tank. Read this gauge to determine when fuel is low.
NOTICE
12. Fuel cock lever – Turn lever downward to start (down)
the flow of fuel into the carburetor.Turn upward to stop
(up) the flow of fuel.
This HONdaengine is equipped with a low oil shutdown
capability.A built in sensor will automatically turn off the
engine should the oil level fall below a safe operating
condition. Make sure the generators is placed on level
ground. Placing the generators on level ground will
ensure that the low oil sensor will function properly.
13. choke lever – Used for starting the engine. Close
the choke lever when starting a cold engine or in
cold weather conditions. The choke enriches the fuel
mixture.Open the choke lever if starting a warm engine
or in warm weather conditions.
page 18 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
inspectiOn/setup
geNeRal iNspecTiON pRiORTO OpeRaTiON
extension cable
When electric power is to be provided to various tools or
loads at some distance from the generator, extension cords
are normally used. Cables should be sized to allow for
distance in length and amperage so that the voltage drop
between the generators and point of use (load) is held to
a minimum. Use the cable selection chart (Table 3) as a
guide for selecting proper cable size.
ground powerTools
When using power tools or electrical equipment requireing
AC power from the generator, make sure power tool cord
has a ground pin or is double insulated as shown in Figure 5.
daNgeR
NeveR use power tools or equipment that do not
have a ground capability, the possibility exists of
electrocution, electrical shock or burn, which can cause
severe bodily harm or even deaTH!
main circuit Breaker
alWaYs place the main circuit breaker in the OFF position
prior to starting the engine.
Figure 5. Ground Pin
NOTICE
Double-insulated power tools and small appliances
have specially insulated housings that eliminate the
need for a ground pin.These types of double-insulated
power cords are designed so that no part of the device
will be electrically live even if the internal insulation fails.
Table 3. cable selection (60 Hz, single phase Operation)
load in Watts
maximum allowable cable length
current in
amperes
120 volts
240 volts
600
#10 Wire
1000 ft.
500 ft.
350 ft.
250 ft.
150 ft.
125 ft.
#12 Wire
600 ft.
300 ft.
200 ft.
150 ft.
100 ft.
75 ft.
#14 Wire
375 ft.
200 ft.
125 ft.
100 ft.
65 ft.
#16 Wire
250 ft.
2.5
5
300
600
1200
1800
2400
3600
4800
125 ft.
7.5
10
15
20
900
100 ft.
1200
1800
2400
50 ft.
cauTiON: Equipment damage can result from low voltage.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
inspectiOn/setup
Before starting
1. Read safety instructions at the beginning of manual.
2. Clean the generator, removing dirt and dust, particularly
the engine cooling air inlet, carburetor and air
cleaner.
3. Check the air filter for dirt and dust. If air filter is dirty,
replace air filter with a new one as required.
4. Check carburetor for external dirt and dust.Clean with
dry compressed air.
Figure 7. Engine Oil Dipstick(Oil Level)
5. Check fastening nuts and bolts for tightness
Table 4. OilType
engine Oil check
season
Summer
Spring/Fall
Winter
Temperature
25°C or Higher
25°C~10°C
OilType
1. To check the engine oil level, place the generator on
secure level ground with the engine stopped.
SAE 10W-30
SAE 10W-30/20
SAE 10W-10
2. Remove the filler dipstick from the engine oil filler hole
(Figure 6) and wipe clean.
0°C or Lower
Fuel check
1. Close the fuel cock before filling the fuel tank.
2. Remove the fuel cap located on top of fuel tank.
3. Read the fuel gauge located on top of the fuel tank
(Figure 8) to determine if the fuel level is low. If fuel is
low, replenish with clean unleaded fuel.
Figure 6. Engine Oil Dipstick Removal
3. Insert and remove the dipstick without screwing it
into the filler neck. Check the oil level shown on the
dipstick.
Figure 8. Fuel Gauge
4. When refueling, be sure to use a strainer for filtration.
dO NOT top-off fuel. dO NOT fill the tank beyond
capacity. Wipe up any spilled fuel immediately!
4. If the oil level is low (Figure 7), fill to the edge of the
oil filler hole with the recommended oil type (Table 4).
Maximum oil capacity is .63 quarts (0.6 liters).
page 20 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn
This section is intended to assist the operator with the initial
start-up of the portable generator.It is extremely important
that this section be read carefully before attempting to use
the generators in the field.
3. Place the choke lever (Figure 11) in the OpeN position
if starting a warm engine or the temperature is warm.
4. Place the engine ON/OFF switch (Figure 12) in the
ON position.
Before starting the engine
1. Be sure to disconnect all electrical loads from the
generator prior to starting the engine.
2. NeveR start the engine with the main circuit breaker
in the ON position. Always place this circuit breaker
(Figure 9) in the OFF position before starting.
Figure 12. Engine ON/OFF Switch (ON)
5. Grasp the starter grip (Figure 13) and slowly pull it out.
The resistance becomes the hardest at a certain
position, corresponding to the compression point. Pull
the starter grip briskly and smoothly for starting.
Figure 9. Main Circuit Breaker (OFF)
starting the engine
1. Place the engine fuel valve lever (Figure 10) to the ON
position.
Figure 13. Starter Grip
6. If the engine has started, slowly return the choke lever
(Figure 11) to the OpeN position.If the engine has not
started repeat steps 1 through 5.
Figure 10. Engine Fuel Valve Lever (ON)
2. Place the choke lever (Figure 11) in the clOsed
position if starting a cold engine.
7. Before the generator is placed into operation, run the
engine for 3-5 minutes. Check for abnormal smells,
fuel leaks, and noises that would associate with lose
components.
NOTICE
dO NOT pull the starter rope all the way to the end.
dO NOT release the starter rope after pulling. Allow it
to rewind as soon as possible.
Figure 11. Choke Lever
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn
8. Place main circuit breaker (Figure 14) in the ON
position.
2. Let the engine run at idle with no load for 2-3 minutes.
3. Place the engine ON/OFF switch (Figure 17) in the
OFF position.
Figure 14. Main Circuit Breaker (ON)
9. Read the voltmeter on the front panel of the generator
(Figure 15) and verify that 120 VAC is present at the
GFCI duplex receptacle. For additional verification of
voltage, an external voltmeter can be used to measure
the output voltage as shown in Figure 15.
Figure 17. Engine ON/OFF Switch (OFF)
4. Place the engine fuel valve lever (Figure 18) in the OFF
position.
Figure 18. Engine Fuel Valve Lever (OFF)
5. Remove all loads from the generator.
Emergency Shutdown
Figure 15. 120V/GFCI Receptacle
1. Place the engine ON/OFF switch (Figure 17) in the
OFF position.
10. Connecting of loads (power tools, lighting ect.) to the
generator receptacles can now be done.
stopping the engine (Normal shutdown)
1. Place the main circuit breaker (Figure 16) in the OFF
position.
Figure 16. Main Circuit Breaker (OFF)
page 22 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
preparatiOn fOr lOng terM stOrage
generators storage
For storage of the generating set for over 30 days, the
following is required:
„ Drain the fuel tank completely, or add STA-BIL to the
fuel.
„ Run the engine until the gasoline in the carburetor is
completely consumed.
„ Completely drain the oil from the crankcase and refill
with fresh oil.
„ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into
the cylinder and crank slowly to distribute the oil.
„ Slowly rotate the engine a few times with the starter rope
and install a new plug.
„ Pull out the starter rope slowly and stop at the
compression point.
„ Clean all external parts of the generating set with a
cloth.
„ Cover the generating set and store in a clean, dry
place.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Use Table 5 as a general maintenance guideline when
servicing your engine.For more detail engine maintenance
information, refer to the engine owner's manual supplied
with your engine.
Table 5. engine maintenance schedule
FiRsT eveRY 3
BeFORe mONTH OR mONTHs
eveRY 6
mONTHs
10 HRs. OR 25 HRs. OR 50 HRs. 100 HRs. 200 HRs.
eveRY
YeaR OR 2YeaRs OR
eveRY
descRipTiON
(3)
OpeRaTiON
CHECK
CHANGE
CHECK
X
X
Engine Oil
X
Air Cleaner
All Nuts & Bolts
Spark Plug
CHANGE
X (1)
RETIGHTEN IF
NECESSARY
X
CHANGE
REPLACE
CHECK
X
X
Cooling Fins
Spark Arrester
Fuel Tank
X
CLEAN
X
CLEAN
X
Fuel Filter
CHECK
X
Idle Speed
CHECK-ADJUST
X (2)
Valve Clearance CHECK-ADJUST
Fuel lines CHECK
(1) Service more frequently when used in dusTY areas.
X (2)
Every 2 years, replace if necessary (2)
(2) These items should be serviced by your service dealer, unless you have the proper tools and are mechanically
proficient. Refer to the HONDA Shop Manual for service procedures.
(3) For commercial use, log hours of operation to determine proper maintenance intervals.
page 24 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
maintenance
Perform the scheduled maintenance procedures as defined
by Table 5:
daily
„ Thoroughly remove dirt and oil from the engine and
control area. Clean or replace the air cleaner elements
as necessary. Check and retighten all fasteners as
necessary.
Weekly
Figure 20. Draining Engine Oil
„ Remove the fuel filter cap and clean the inside of the
fuel tank.
engine air cleaner
„ Remove or clean the filter at the bottom of the tank.
1. Remove the air cleaner cover and foam filter element
as shown in Figure 21.
„ Remove and clean the spark plug (Figure 19), then adjust
the spark gap to 0.024 ~0.028 inch (0.6~0.7 mm). This
unithaselectronicignition, whichrequiresnoadjustments.
daNgeR
dO NOT use gasoline as a cleaning
solvent, the possibility exists of fire or
explosion which can cause damage to
the equipment and severe bodily harm or
even deaTH!
2. Clean foam element in warm, soapy water or
nonflammable solvent. Rinse and dry thoroughly. Dip
the element in clean engine oil and completely squeeze
out the excess oil from the element before installing.
Figure 19. Spark Plug Gap
engine Oil
1. Drain the engine oil when the oil is warm as shown in
Figure 20.
2. Remove the oil drain bolt and sealing washer and allow
the oil to drain into a suitable container.
3. Replace engine oil with recommended type oil as listed
in Table 4. For engine oil capacity, see Table 2 (engine
specifications). dO NOT overfill.
4. Install drain bolt with sealing washer and tighten
securely.
Figure 21. Engine Air Cleaner
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
generatOr wiring diagraM
sYmBOl
paRT Name
Wiring color code
Ar
Fg-PN
EXW1~2 Excitation Winding
Armature Winding
symbol
color
BLACK
BLUE
symbol
color
RED
Field Winding
B
L
R
W
Y
WHITE
V
AC Voltmeter (120/240)
Rectifier
BR
G
BROWN
GREEN
GRAY
YELLOW
LIGHT BLUE
LIGHT GREEN
ORANGE
Re
LB
LG
O
GR
V
CON
CB
CB1
Receptacle 5-15R
UPM-1 15A
VIOLET
PINK
P
CP-31E/15N 15A
Figure 22. Generator Wiring Diagram
page 26 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
trOubleshOOting
Table 6. engineTroubleshooting
symptom
possible cause
solution
Spark plug bridging?
Check gap, insulation or replace spark plug.
Clean or replace spark plug.
Carbon deposit on spark plug?
Difficult to start. Fuel is
available but no SPARK
at spark plug.
Short circuit due to deficient spark plug
insulation?
Check spark plug insulation. Replace if
worn.
Improper spark plug gap?
ON/OFF switch is shorted?
Ignition coil defective?
Set to proper gap.
Check switch wiring. Replace switch.
Replace ignition coil.
Difficult to start. Fuel is
available and SPARK
is present at the spark
plug.
Improper spark gap, points dirty?
Set correct spark gap and clean points.
Condenser insulation worn or short
circuiting?
Replace condenser.
Spark plug wire broken or short circuiting?
Wrong fuel type?
Replace defective spark plug wiring.
Difficult to start. Fuel
is available, SPARK is
present at the spark
plug and compression
is normal.
Flush fuel system and replace with correct
type of fuel.
Water or dust in fuel system?
Air cleaner dirty?
Flush fuel system.
Clean or replace air cleaner.
Suction/exhaust valve stuck or protruded?
Piston ring and/or cylinder worn?
Reseat valves.
Difficult to start. Fuel
is available, SPARK is
present at the spark
plug and compression
is low.
Replace piston rings or piston.
Cylinder head and/or spark plug not
tightened properly?
Torque cylinder head bolts and spark plug.
Head gasket and/or spark plug gasket
damaged?
Replace head and spark plug gaskets.
Fill with correct type of fuel.
Fuel not available in fuel tank?
Apply lubricant to loosen fuel cock lever.
Replace if necessary.
Fuel cock does not open properly?
No fuel present at
carburetor.
Fuel filter clogged?
Replace fuel filter.
Fuel tank cap breather hole clogged?
Air in fuel line?
Clean or replace fuel tank cap.
Bleed fuel line
Air cleaner dirty?
Clean or replace air cleaner.
Check float adjustment. Rebuild carburetor.
Clean or replace spark plug.
Weak in power.
Compression is proper Improper level in carburetor?
and does not misfire.
Defective spark plug?
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
trOubleshOOting
Table 6. engineTroubleshooting (continued)
symptom
possible cause
solution
Flush fuel system and replace with correct
type of fuel.
Water in fuel system?
Weak in power.
Compression is proper
but misfires.
Dirty spark plug?
Clean or replace spark plug
Replace ignition coil.
Ignition coil defective?
Spark plug heat value improper?
Incorrect type of fuel?
Cooling fins dirty?
Replace with correct type of spark plug.
Replace with correct type of fuel.
Clean cooling fins.
Engine overheats.
Governor adjusted correctly?
Governor spring defective?
Fuel flow restricted?
Adjust governor
Rotational speed
fluctuates.
Replace governor spring.
Check entire fuel system for leaks or clogs.
Recoil mechanism clogged with dust and
dirt?
Clean recoil assembly with soap and water.
Replace spiral spring.
Recoil starter
malfunction.
Spiral spring loose?
page 28 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
trOubleshOOting
Table 7. generatorTroubleshooting
possible problem
symptom
solution
Low voltage
Engine speed too low?
Raise engine speed to rated RPM.
Replace Ac voltmeter.
AC voltmeter not working?
Control box internal wiring
malfunction?
Check control box wiring.
Check red and green ignition wires.
Replace ignition wires if necessary.
Defective ignition coil?
Low voltage. Engine speed normal
3650 RPM (unloaded), 2500 RPM
(idle)
Rotor winding malfunction?
Stator winding malfunction?
Leakage breaker malfunction?
Check or replace rotor.
Check or replace stator.
Check or replace CB1.
Check full power switch and full power
switch circuit.
Full power switch malfunction?
Engine speed too high?
Voltage output too high.
Lower engine speed to rated RPM.
Voltage output too high. Engine speed
normal 3650 RPM (unloaded), 2500
RPM (idle)
Control box internal wiring
malfunction
Check control box wiring.
Circuit breaker will not turn on "NO
LOAD"
Defective circuit breaker?
Overload Condition?
Replace circuit breaker.
Reduce load or replace breaker.
Check load circuit for short.
Circuit breaker will turn on "LOADED"
but trips immediately.
Load circuit is shorted?
Stuck solenoid?
Check solenoid.
Does not accelerate from low to high
"NO LOAD"
Bad Idle control switch?
Idle control switch malfunction?
Idle control device malfunction?
Control box interal wiring defective?
Defective rotor windings?
Defective solenoid?
Check or replace idle control switch.
Check or replace idle control switch.
Check or replace idle control device.
Check control box wiring.
Does not accelerate from low to high
"LOAD ACTIVE"
Check or replace rotor.
Check or replace solenoid.
Does not decelerate no"VOLTAGE
OUTPUT".
Defective idle control device?
Defective solenoid?
Check or replace idle control device.
Check or replace idle control device.
Check control box wiring, replace any
defective components.
Control box wiring malfunction?
Does not decelerate but has
"VOLTAGE OUTPUT".
Defective solenoid?
Check or replace solenoid.
Idle control device malfunction?
Check or replace idle control device.
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
eXplanatiOn Of cOde in reMarKs cOluMn
The following section explains the different symbols and
QTY. column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
sample paRTs lisT
RemaRKs column
NO. paRT NO. paRT Name
QTY. RemaRKs
Some of the most common notes found in the“Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. column
Indicated by:
unique symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
duplicate item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
specific model Number use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
paRT NO. column
Numbers used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“make/Obtain locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not sold separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
page 30 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
suggested spare parts
gac2.2H pORTaBle 60 Hz geNeRaTORWiTH HONda gX160K1ema2/
gX160u1emaN gasOliNe eNgiNes
1 to 3 units
Qty.
p/N
description
1............0810106004..........CAP FUEL TANK
1............0810107103..........FILTER FUEL
4............7935419204..........RUBBER SUSPENSION
4............7935419304..........RUBBER SUSPENSION
3............9807956846..........SPARK PLUG
1♦.........34150ZH7003.......SWITCH ASSY., OIL ALERT
1◊ ........34150ZH7013.......SWITCH ASSY., OIL ALERT
2............28462ZH8003.......ROPE, RECOIL
3............17211ZB2000.......ELEMENT AIR CLEANER
NOTICE
Part numbers on this Suggested Spare Parts list may
supersede/replace the part numbers shown in the
following parts lists.
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
naMeplate and decals
S/N 5560983 AND BELOW
2200
3
WARNING/ATTENTION
Only operate machine in well
ventilated areas.
Do not inhale exhaust gases.
8
N’utilizez l’equipment que dans
des endroits bien aérés.
CAUTION
Ne respirez paz les gas d’échappement.
Do not use in rain or snow.
Only qualified personnel should install, use,
or service this equipment.
Dangerous
Gas/Gas
dangereux
Seul un personnel qualifié devrait avoir
l’authorisation d’installer d’utilisier ou
de réparer cet équipement.
ATTENTION
2
1
A63210090A
Ne pas utiliser en cas de
pluie ou neige.
A3520000A
CAUTION/ATTENTION
NEUTRAL BONDED TO FRAME
120V
15A
V
120
GAC-2.2H
NEUTRE MIS
A
LA MASSE
A
HOT PARTS can burn skin.
LA CARCASSE DU MOTEUR
POWERED by
DO NOT touch until the
lamp has sufficiently cooled.
Honda Engines
9
211052
AC CIRCUIT BREAKER
INTERRUPTEUR DE
COURANT PRINCIPAL
Danger de brûlure, pièces chaudes.
Ne touchez pas avant que l’appareil
GR PRISE DE
TERRE
ne soit suffisamment refroidi.
A65200040A
7
FUEL COCK
4
ROBINET’
ON/OUVERT
D
ESSENCE
OFF/
FERMER
A90820000
Do not touch output terminals or internal
wiring while unit is operating.
Turn off power before servicing.
Ne touchez ni les terminaux externes ou le
cablage electrique interne lorsque que
l’équipement est en operation.
Eteindre avant de réparer.
Only qualified personnel should install, use,
or service this equipment.
Electrical
shock hazard
Possibilité
de choc
Seul un personnel qualifié devrait avoir
l’authorisation d’installer d’utilisier ou
de réparer cet équipement.
electrique
A63210100A
6
CAUTION
II est impératif de lire le manuel d’utilisation
avant d’utiliser ou de réparer cet équipement.
CAUTION
READ OWNER’S SERVICE MANUAL BEFORE OPERATING OR
SERVICING THIS MACHINE.
II est impératif degarder tout personnel non
authorisé ou non qualifié
ALWAYS KEEP UNAUTHORIZED INEXPERICENCED
UNTRAINED PEOPLE AWAY FROM THIS MACHINE.
Insulation System --- B
Maximum ambient
Temperature --- 40°C (104°F)
à
distance de cet equipement.
Assurez vous que tout equipement de sécurité est
fonctionnel avant d’engager l’equipement. Assurez vous
que le moteur est éteint et que le fil de la bougie
est d’econnecté avant de réparer la machine ou vant
tout contact avec toute pièce en mouvement.
Si l’equipement est alimenté par un moteur électrique
débranchez l’appareil.
MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL
BEFORE THIS MACHINE IS STARTED. MAKE SURE ENGINE
IS TURNED OFF AND SPARK PLUG WIRE DISCONNECTED
BEFORE SERVICING THE MACHINE OR COMING IN
CONTACT WITH ANY MOVING PART. IF EQUIPMENT IS
POWERED BY AN ELECTRIC MOTOR DISCONNECT
ELECTRICAL PLUG.
Systéme d’insulation --- B
Température ambiante
maximum --- 40°C (104°F)
5
A33210030A
Ne laissez jamis l’appareil sans supervision quand
il est en marche, II est impératif d’arrêter le
motour et de la laisser refroidir avant d’ajouter
de l’huile ou du carburant.
NEVER LEAVE MACHINE UNATTENDED WHEN OPERATING
ALWAYS STOP ENGINE AND ALLOW ENGINE TO COOL
BEFORE ADDING FUEL OR OIL.
A55200070A
A5520080
10
S/N 5560984~ 5582067 S/N 5582068~ 5623308
S/N 5623309 AND ABOVE
DANGER
Using generator indoors CAN KILL YOU IN MINUTES.
Utilser un générateur
WARNING
Operation of this equipment may create
sparks that can start fires around dry
vegetation.
a
à
l’ intérieur VOUS TUERA EN QUELQÙES MINUTES.
Exhaust contains carbon monoxide, a poison gas you cannot see or smell.
Les gaz d’ échappement contiennent du monoxyde de carbon, un gaz toxique
invisible et inodore.
THE
POSSIBILITY EXISTS OF ELECTROCUTION IF
GENERATOR/WELDER IS NOT PROPERLY GROUNDED.
ALWAYS CONNECT EARTH GROUND (GROUND ROD) TO
GENERATOR GROUND POINT.
CAUTION
A spark arrestor may be required.
The operator should contact local fire
agencies for laws or regulation relating
to fire prevention requirements.
IL
QUE LA GÉNÉRATRICE/SOUDEUSE NE SOIT PROPREMENT
MISE LA TERRE. S’ASSURER DE RELIER LA MASSE
Y
AURAIT UN RISQUE D’ÉLECTROCUTION
À
MOINS
Do not use in rain or snow.
A
A
.
1
2
0
V
A
V
1
2
0
N
L
A
T
R
A
L
B
O
N
A
E
D
M
O
O
R
E
M
E
1
2
0
V
A
V
1
2
0
N
N
T
R
L
O
N
E
M
O
S
R
M
E
W
R
E
b
L
A
C
A
R
C
A
S
E
D
U
M
O
T
E
U
R
2
5
I
E
P
T
U
E
2
1
5
i
(BARRE DE MASSE) LE POINT DE MISE
L’APPAREIL.
A
LA TERRE DE
G
R
E
I
E
D
E
C
O
U
N
T
R
I
C
I
A
L
G
R
T
E
I
E
D
E
C
I
U
T
E
R
N
U
P
T
R
I
U
R
I
D
A
L
GAC-2.2H
1
2
0
V
A
V
1
2
0
N
L
A
T
R
R
A
E
L
B
O
S
A
E
D
T
O
F
R
A
M
E
P
O
W
E
R
E
D
b
y
2
0
H
o
n
d
a
E
n
g
i
n
e
s
I
E
R
U
P
T
E
U
R
D
E
G
R
T
R
I
E
D
E
C
O
U
N
T
R
I
C
I
A
L
GROUND ROD FOR
EARTH GROUND
BARRE DE MASSE
ATTENTION
13
Des étincelles pouvant enflammer la
végétation séche environnante peuvent être
produites pendant le fonctionnement de cet
équipement.
GROUND TERMINAL
PRISE DE TERRE
ONLY use outdoors and away from
open windows, doors, and vents.
NEVER use in enclosed or partially
enclosed areas.
Utilisation INTERDITE dans un
espace clos ou partiellement clos.
11
Ne pas utiliser en cas de
pluie ou neige.
Utilisation UNIQUEMENT
portes et trous d’ aération
à
l’ extér leur
CONNECT TO BUILDING
GROUND IF REQUIRED
À LA MASSE
D’OUVRAGE EVENTUELLEMENT
ARELIER
GROUND CABLE
#8 MINIMUM
CÂBLE DE MASSE
#8 MINIMUM
A3520000A
A9504000104
Un pare–étincelles peut être requis.
L’opérateur doit contacter les agences
anti–incendie locales pour s’ informer
des lois ou feglementations concernant les
exigences de prévention–incendie
A90400020
FOR FURTHER GROUNDING
INSTRUCTIONS READ MANUAL
8
8
FT. MINIMUM
PIEDS MINIMUM
POUR PLUS DE DÉTAILS
CONCERNANT LA MISE Á LA
TERRE, LIRE LE MANUEL
REFERENCE NEC 250-52 (C)
RÉFERÉNCE NEC 250-52 (C)
A91110020
CAUTION
Do not use in rain or snow.
12
ATTENTION
1
1
Ne pas utiliser en cas de
pluie ou neige.
A3520000A
page 32 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
naMeplate and decals
NO.
1
2
3
4
5
6
7
8
paRT NO.
paRT Name
QTY.
RemaRKs
A3552000004A
A6552000404A
A6532100904A
A6532101004A
A5552000804
A5552000704A
A9508200004
A1562000803
A2512100112
A3532100304A
A9511100204
DECAL; CAUTION, RAIN SNOW.......................1................A35200000A
DECAL; CAUTION, HOT PARTS .......................1................A65300040A
DECAL; WARNING, EXHAUST GASES............1................A63210090A
DECAL; DANGER, ELECTROCUTION .............1................A63210100A
DECAL; OPERATING INSTR. (FRENCH)..........1................A552200080
DECAL; OPERATING INSTR. (ENGLISH).........1................A55200070A
DECAL; FUEL COCK.........................................1................A90820000
DECAL; MQ LOGO 2200 STRIPE.....................1................A16200080
DECAL; FRONT NAMEPLATE GAC2.2H ..........1................A21210011
DECAL; SPECIFICATION..................................1................A33210030A
DECAL; DANGER, GROUND ROD ...................1................A91110020
.............................................................................................S/N 5560984~5582067
DECAL; DANGER, DANGEROUS GASES........1................A90400010
.............................................................................................S/N 5582068~5623308
DECAL; WARNING, SPARK ARRESTOR..........1................A90400020
.............................................................................................S/N 5623309 AND ABOVE
9
10
11
12
13
A9504000104
A9504000204
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
generatOr assy.
page 34 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
generatOr assy.
NO.
1
1-1
1-2
paRT NO.
paRT Name
QTY.
1
1
2
2
1
1
1
1
1
1
1
1
1
4
4
4
1
1
4
1
2
1
2
1
RemaRKs
7931000203
7681080003
0601823213
0601822637
0603000040
7681017104
0801086004
0040008000
A2136000503
7931315002
7931315102
7875021523
7681331003
7681344204
0040006000
0041206000
7871329514
0601851760
0017408020
7935420104
0021806010
7935420004
0207206000
0017108020
ROTOR ASSY.
FIELD COIL
RECTIFIER
SURGE ABSSORBER
BEARING
SET BOLT, ROTOR
SET WASHER, BEARING
WASHER, LOCK
ARMATURE ASSY.
END BRACKET
END BRACKET
GUIDE PANEL, AIR
COVER
SET BOLT, STATOR
WASHER, LOCK
WASHER, FLAT
GROMMET
1-3
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CAP
HEX. HEAD BOLT
STAY, MUFFLER
MACHINE SCREW
STAY, MUFFLER
HEX. NUT
HEX. HEAD BOLT
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
cOntrOl bOX assy.
page 36 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
cOntrOl bOX assy.
NO.
1
2
3
4
5
6
7
8
paRT NO.
paRT Name
QTY.
RemaRKs
A2215000103
0301850215
0601823204
0027103020
0017106015
A2225000503
0601806867
0038303000
0601807462
0027104010
A3262800104
0601815147
0040005000
0031005000
CONTROL BOX
GROMMET
RECTIFIER
MACHINE SCREW
HEX.HEAD BOLT
CONTROL PANEL
AC VOLTMETER
HEX NUT
CIRCUIT BREAKER, 15A 250V
MACHINE SCREW
TERMINAL PLATE
GROUND TERMINAL
WASHER, LOCK
HEX NUT
HEX NUT
HEX HEAD BOLT
HEX NUT
1
1
1
2
4
1
1
2
1
2
1
1
1
1
1
1
1
1
1
2
1
4
2
1
2
2
1
2
9
10
11
12
12A
12B
12C 0038305000
13
13A
14
14A
14B
14C 0038305000
15
15A
16
17
0010005025
0038305000
0010005040
0040505000
0031005000
HEX HEAD BOLT
TOOTHED WASHER
HEX NUT
HEX. NUT
0017105010
0040505000
0601812590
0027104016
0038304000
A2225200004
0027103010
HEX HEAD BOLT
TOOTHED WASHER
RECEPTACLE, 515R GF5252
MACHINE SCREW
HEX NUT
17A
18
19
CB COVER
MACHINE SCREW
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
pipe fraMe assy.
page 38 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
pipe fraMe assy.
NO.
1
2
3
4
5
6
7
8
paRT NO.
paRT Name
PIPE FRAME
WASHER
RUBBER SUSPENSION
RUBBER SUSPENSION
HEX NUT
QTY.
RemaRKs
A2418000202
0801886104
7935419204
7935419304
0207208000
7935510102
0810106004
0810107103
0602125034
0605510065
1
2
2
2
8
1
1
1
1
FUEL TANK
CAP FUEL TANK
FUEL FILTER
FUEL GAUGE
9
10
FUEL STRAINER...............................................1................INCLUDES ITEMS W/#
.............................................................................................REPLACES P/N 0605510065
CUP ...................................................................1................REPLACES P/N 0605510066
FILTER...............................................................1................REPLACES P/N 0605510067
10-1# 16950898633
10-2# 16952883005
11
12
13
14
15
16
17
18
19
20
21
21A
22
23
24
950014500160M HOSE.................................................................1................REPLACES P/N 0605513141
9500202080
90854ZB2000
7855525514
7855525604
0017108030
0017108020
7935421004
0017106016
0017106016
0017106016
0040506000
0031308000
0011308020
0040008000
HOSE BAND......................................................2................REPLACES P/N 0605515188
GROMMET ........................................................1................REPLACES P/N 0601851775
RUBBER WASHER
COLAR
2
2
2
2
1
2
3
1
1
2
2
2
HEX HEAD BOLT
HEX HEAD BOLT
BRACKET, MUFFLER COVER
HEX HEAD BOLT
HEX HEAD BOLT
HEX HEAD BOLT
TOOTHED WASHER
HEX NUT
HEX HEAD BOLT
WASHER, LOCK
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — cyl. hd assy.
page 40 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — cyl. hd assy.
NO.
1♦
1◊
2#
3#
4#
5
6♦
6◊
7
8♦
8◊
9
10
11
12
13
14
14
paRT NO.
paRT Name
QTY.
RemaRKs
12210ZH8020
12210ZH8415
12204ZE1306
12205ZE1315
12216ZE5300
12251ZF1800
12310ZE1010
12310ZE1020
12391ZE1000
15721732000
15721883030
90013883000
90043ZB2003
90047ZE1000
9430110160
957230806000
9807956846
9807956855
HEAD COMP., CYLINDER.................................1................INCLUDES ITEMS W/#
HEAD COMP., CYLINDER.................................1................INCLUDES ITEMS W/#
GUIDE, IN.VALVE (OVER SIZE)
GUIDE, IN.VALVE
CLIP, VALVE GUIDE
GASKET, CYLINDER HEAD
COVER COMP, HEAD
COVER COMP, HEAD
PACKING, HEAD COVER
TUBE, BREATHER
1
1
1
1
1
1
1
1
1
4
2
2
2
4
1
1
TUBE, BREATHER
BOLT, FLANGE 6X12
BOLT, STUD 6X94
BOLT, STUD 8X32
PIN, DOWEL 10X16
BOLT, FLANGE 8X60
PLUG, SPARK (BPR6ES NGK)
PLUB, SPARK (W20EPR-U ND)
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — cyl. barrel assy.
page 42 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — cyl. barrel assy.
NO.
2♦
2◊
paRT NO.
paRT Name
QTY.
RemaRKs
12000ZH8406
12000ZH8426
15510ZE1033
15510ZE1043
16510ZE1000
BARREL ASSY, CYLINDER (OIL ALERT).........1................INCLUDES ITEMS W/#
BARREL ASSY, CYLINDER (OIL ALERT).........1................INCLUDES ITEMS W/#
SWITCH ASSY, OIL LEVEL
SWITCH ASSY, OIL LEVEL
GOVERNOR ASSY. ...........................................1................USE UP TO S/N 4913229
.............................................................................................INCLUDES ITEMS W/%
GOVERNOR ASSY. ...........................................1................USE FROM S/N 4913230
.............................................................................................INCLUDES ITEMS W/%
GOVERNOR ASSY. ...........................................1................INCLUDES ITEMS W/%
3♦
1
1
3◊
4♦
4♦
16506ZL0000
16506ZL0000
4◊
5%♦ 16511ZE1000
6%♦ 16512ZE1000
7%♦ 16513ZE1000
WEIGHT, GOVERNOR
HOLDER, GOVENOR WEIGHT
PIN, GOVERNOR WEIGHT
SLIDER, GOVERNOR
SHAFT, GOVERNOR ARM
BOLT, DRAIN PLUG
WASHER, THRUST 6MM
WASHER, DRAIN PLUG 10.2MM
CLIP, GOVERNOR HOLDER
BEARING, RADIAL BALL (6205TMB)
OIL SEAL 25X41X6
O-RING, 13.5X1.5
NUT, FLANGE, 10MM
WASHER, PLAIN, 6MM
PIN, LOCK, 8MM
BOLT, FLANGE, 6X12
2
1
2
1
1
2
1
2
1
1
1
1
1
2
1
2
1
8
16531ZE1000
16541ZE1000
90131ZE1000
90451ZE1000
90601ZE1000
90602ZE1000
91001ZF1003
91201Z0T801
91353671004
9405010000
9
12
13
14
15
16#
17#
18
19
20
21
22
23
9410106800
9425108000
957010601200
06111ZH8405
GASKET KIT
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—cranKcasecvr.assy.
page 44 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—cranKcasecvr.assy.
NO.
1
3
4
5
8#
9%
10
11
paRT NO.
paRT Name
COVER ASSY, CRANKCASE............................1................INCLUDES ITEMS W/%
GASKET, CASE COVER
CAP ASSY, OIL FILLER.....................................1................INCLUDES ITEMS W/#
QTY.
RemaRKs
11300ZE1634
11381ZH8801
15600ZE1003
15600ZG4003
15625ZE1003
91201Z0T801
9430108140
957010803200
1
CAP, OIL FILLER
1
1
1
2
6
1
GASKET, OIL FILLER CAP
OIL SEAL, 25X41X6
PIN, DOWEL 8X14
BOLT, LANGE 8X32
BEARING, RADIAL BALL, 6205
12% 961006205000
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine — cranKshaft assy.
page 46 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine — cranKshaft assy.
NO.
1
paRT NO.
13310ZB2000
paRT Name
CRANKSHAFT COMP.
QTY.
1
RemaRKs
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — pistOn assy.
page 48 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — pistOn assy.
NO.
1♦
1◊
1♦
1◊
1♦
1◊
1♦
1◊
2
paRT NO.
paRT Name
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RemaRKs
13010ZF1023
13010Z4K004
13011ZF1023
13011Z4K004
13012ZF1023
13012Z4K004
13013ZF1023
13013Z4K004
13101ZH8010
13102ZH8010
13103ZH8000
13103ZH8010
13102ZH8010
13104ZH8010
13111ZE1000
13200ZE1010
90001ZE1000
90551ZE1000
RING SET, PISTON (STD)
RING SET, PISTON (STD)
RING SET, PISTON (0.25)
RING SET, PISTON (0.25)
RING SET, PISTON (0.50)
RING SET, PISTON (0.50)
RING SET, PISTON (0.75)
RING SET, PISTON (0.75)
PISTON (STD)
PISTON (0.25)
PISTON (0.50)
PISTON (0.50)
PISTON (0.75)
2
2♦
2◊
2♦
2◊
3
4
5
6
PISTON (0.75)
PIN, PISTON
ROD ASSY, CONNECTING
BOLT, CONNECTING ROD
CLIP, PISTON PIN, 18MM
2
2
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — caMshaft assy.
page 50 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — caMshaft assy.
NO.
1♦
1♦
1◊
2
3
4
5
6
7
8
9
10
11
12
13
14
15
paRT NO.
paRT Name
QTY.
RemaRKs
14100ZE1812
14100ZL0000
14100ZL0000
14410ZE1010
14431ZE1000
14441ZE1000
14451ZE1013
14568ZE1000
14711ZF1000
14721ZF1000
14751ZF1000
14771ZE1000
14773ZE1000
14781ZE1000
14791ZE1010
90012ZE0010
90206ZE1000
CAMSHAFT ASSY. ............................................1................UP TO S/N 4913229
CAMSHAFT ASSY. ............................................1................FROM S/N 4913230
CAMSHAFT ASSY.
ROD, PUSH
ARM, VALVE ROCKER
LIFTER, VALVE
PIVOT, ROCKER ARM
SPRING, WEIGHT RETURN
VALVE, IN
VALVE, EX
SPRING, VALVE
RETAINER, IN.VALVE SPRING
RETAINER, EX.VALVE SPRING
ROTATOR, VALVE
PLATE, PUSH ROD GUIDE
BOLT, PIVOT (8MM)
NUT, PIVOT ADJUSTING
VALVE STEM
1
2
2
2
2
1
1
1
2
1
1
1
1
2
2
1
18♦ 12209ZH8003
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—recOilstarterassy.
page 52 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—recOilstarterassy.
NO.
1♦
1◊
2
paRT NO.
paRT Name
QTY.
1
1
RemaRKs
28400ZH8013ZB STARTER ASSY, RECOIL “NH1” BLACK
28400ZH8023ZB STARTER ASSY, RECOIL “NH1” BLACK
28410ZH8003ZB CASE, RECOIL STARTER “NH1” BLACK
1
3♦
3◊
4♦
4◊
5♦
5◊
6♦
6◊
7
28420ZH8013
28421ZH8801
28422ZH8013
28422ZH8801
28433ZH8003
28433ZH8801
28441ZH8003
28441ZH8801
28442ZH8003
28443ZH8003
28461ZH8003
28462ZH8003
REEL, RECOIL STARTER
REEL, RECOIL STARTER
RATCHET, STARTER
RATCHET, STARTER
GUIDE, RATCHET
1
1
2
2
1
1
1
1
1
2
1
1
1
1
3
GUIDE, RATCHET
SPRING, FRICTION
SPRING, FRICTION
SPRING, RECOIL STARTER
SPRING, RETURN
KNOB, RECOIL STARTER
ROPE, RECOIL STARTER
SCREW, SETTING
8
9
10
12♦ 90003ZH8003
12◊
13
90003ZH8801
90008ZE2003
SCREW, SETTING
BOLT, FLANGE 6X10
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—fancOverassy.
page 54 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine — fan cOver assy.
NO.
3*
4
paRT NO. paRT Name
16584883300 SPRING, CONTROL ADJUSTING
19610ZE1000ZC COVER, FAN “NH1” BLACK
QTY.
1
1
RemaRKs
7♦
7♦
7♦
7◊
19611ZH8820
19612ZH8821
19612ZH8830
19611ZH8820
PLATE, SIDE ALERT & LAMP...........................1................USE FROM S/N 475372719
PLATE, SIDE ALERT & LAMP...........................1................USEFROMS/N4795906~537271
PLATE, SIDE ALERT & LAMP...........................1................USE UP TO S/N 4795905
PLATE, SIDE ALERT & LAMP
1
10♦ 19613ZE1010
CLAMP, CORD...................................................1................USE UP TO S/N 4367320
CLAMP, CORD...................................................1................USE FROM S/N 4367321
10♦ 90601ZH7013
10◊
11
90601ZH7013
19630ZB2000
CLIP, HARNESS
SHROUD COMP., LOWER
1
1
12♦ 19640ZB2010
SHROUD ASSY., UPPER..................................1................USE UP TO S/N 5048024
`............................................................................................INCLUDES ITEMS W/#
SHROUD ASSY., UPPER..................................1................USE FROM S/N 5048025
.............................................................................................INCLUDES ITEMS W/#
12♦ 19640ZH8R60
12◊
19640ZH8R60
SHROUD ASSY., UPPER
1
13♦ 32197ZH8003
14♦ 36100ZE1015
14♦ 36100ZH7003
SUB HARNESS .................................................1................USE UP TO S/N 4367320
ENGINE, STOP SWITCH ..................................1................USE UP TO S/N 4368640
ENGINE, STOP SWITCH ..................................1................USE FROM S/N 4368641
ENGINE, STOP SWITCH
BOLT, FANGE 6X12
BOLT, FLANGE 6X20
14◊
17
18
19#
19#
21
36100ZF6P81
90013883000
90022888010
93500050350A
93500050400G
957010600800
1
8
1
SCREW, PAN 5X35............................................1................USE UP TO S/N 5048024
SCREW, PAN 5X40............................................1................USE FROM S/N 5048025
BOLT, FLANGE 6X8
ALERT UNIT, OIL...............................................1................USE FROM S/N 5372719
ALERT UNIT, OIL
BOLT, FLANGE 6X8...........................................1................USE FROM S/N 5372719
BOLT, FLANGE 6X8
1
23♦ 34150ZH7003
23◊ 34150ZH7003
24♦ 957010600800
24◊ 957010600800
1
1
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—carburetOrassy.
page 56 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—carburetOrassy.
NO. paRT NO.
1#%+ 16010ZB1015
paRT Name
QTY.
RemaRKs
GASKET SET
VALVE SET, FLOAT
FLOAT SET
1
1
1
2$
3$
16011ZE0005
16013ZE0005
4$♦ 16015ZE0831
CHAMBER SET, FLOAT ....................................1................USE FROM S/N BE67A A
CHAMBER SET, FLOAT ....................................1................USE FROM S/N BE51A A
4$♦ 16015ZE1811
4$◊
6$
7
16015ZE0831
16016ZH7W01
16024ZE1811
16028ZE0005
16044ZE0005
CHAMBER SET, FLOAT
SCREW SET
1
1
SCREW SET, DRAIN.........................................1................INCLUDES ITEMS W/%
SCREW SET, B..................................................1................INCLUDES ITEMS W/+
8
9$
CHOKE SET
1
10♦ 16100ZH8E81
CARBURETOR ASSY,(BE67A B)......................1................INCLUDES ITEMS W/$
CARBURETOR ASSY,(BE67P A)......................1................INCLUDES ITEMS W/$
.............................................................................................USE UP TO S/N 1030721
10◊
16100Z4JE81
11$
12$
13
14
15
16
17
18<
19
16124ZE0005
16166ZH8E80
16211ZE1000
16212ZH8800
16221ZH8801
16269ZE1800
16610ZB2000
9430520122
99101ZH80700
99101ZH80720
99101ZH80750
99204ZE00350
SCREW, THROTTLE STOP
NOZZLE, MAIN
INSULATOR, CARBURETOR
GASKET, INSULATOR
GASKET, CARBURETOR
GASKET, AIR CLEANER
LEVER COMP., CHOKE ....................................1................INCLUDES ITEMS W/<
PIN, SPRING 2X12
JET, MAIN, #70, OPTION
JET, MAIN, #72, OPTION
JET, MAIN, #75,
1
1
1
1
1
1
1
1
1
1
19
19$
20$
JET SET, PILOT, #35 .........................................1................INCLUDES ITEMS W/#
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine — air cleaner assy.
page 58 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine — air cleaner assy.
NO.
1
paRT NO.
paRT Name
QTY.
1
1
1
1
1
1
1
1
4
2
1
1
RemaRKs
17211ZB2000
17212ZB2000
17212ZB2800
17220ZB2000
17220ZB2800
17231ZB2000
17239ZB2000
17252ZB2000
90115459770
9405006080
957010601000
17232898000
ELEMENT, AIR CLEANER
SEPARATOR, AIR CLEANER
SEPARATOR, AIR CLEANER
CASE COMP., AIR CLEANER
CASE COMP., AIR CLEANER
COVER AIR CLEANER
STAY AIR CLEANER
SEAL, AIR CLEANER
BOLT, SETTING
BOLT, FLANGE, 6MM
2♦
2◊
3♦
3◊
4
5
6
7
8
9
10◊
BOLT, FLANGE, 6X10
GROMMET, AIR CLEANER
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — Muffler assy.
page 60 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — Muffler assy.
NO.
1
2
3
4
5
6
8
9
paRT NO.
paRT Name
MUFFLER COMP.
PROTECTOR, MUFFLER OUTER
PROTECTOR, MUFFLER INNER
SEAL, MUFFLER PROTECTOR
PIPE COMP., EX
ARRESTER, SPARK
GASKET, MUFFLER
GASKET, MUFFLER
QTY.
RemaRKs
18310ZB3C00
18320ZB2000
18325ZH8T90
18329ZB2000
18330ZH8T90
18355898630
18381ZE1800
18381ZH8800
1
1
1
2
1
1
1
1
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — flywheel assy.
page 62 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — flywheel assy.
NO.
1
2
3
4
paRT NO.
paRT Name
KEY, SPECIAL WOOD RUFF, 25X18
FAN, COOLING
PULLEY, STARTER
FLYWHEEL (LAMP)
NUT, SPECIAL, 14MM
QTY.
RemaRKs
13331357000
19511ZE1000
28451ZH8003
31100ZE1811
90201878003
1
1
1
1
1
5
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—ignitiOncOilassy.
page 64 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—ignitiOncOilassy.
NO.
1♦
1◊
2
4
5
6
7
8
9
10
paRT NO.
paRT Name
QTY.
RemaRKs
30500ZE1033
30500ZE1073
30700ZE1013
31510ZE1811
31511ZE1000
31511ZE1000
36101ZE1010
90019883000
90015883000
90121952000
COIL ASSY., IGNITION
COIL ASSY., IGNITION
CAP ASSY., NOISE SUPPRESSOR
COIL ASSY., LAMP (12V25W)
CLAMPER, CORD
1
1
1
1
1
1
1
1
2
2
GROMMET, CORD
CORD, STOP SWITCH (370 MM)
BOLT, FLANGE, 5X10
BOLT, FLANGE, 6X28
BOLT, FLANGE, 6X25
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—gOv.cOntrOlassy.
page 66 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOndagX160K1eMa2/u1eManengine—gOv.cOntrOlassy.
NO.
1♦
1♦
1◊
2
3♦
3♦
3♦
3◊
4
paRT NO.
paRT Name
QTY.
RemaRKs
16551ZE0010
16551ZL0010
16551ZL0000
16555ZE1000
16561ZH8D00
16561ZL0U30
16561ZL0000
16561ZL0000
16562ZE1020
90015ZE5010
9405006000
ARM, GOVERNOR ............................................1................USE UP TO S/N 4913229
ARM, GOVERNOR ............................................1................USE FROM S/N 4913230
ARM, GOVERNOR
ROD, GOVERNOR
SPRING, GOVERNOR ......................................1................USE UP TO S/N 4913229
SPRING, GOVERNOR ......................................1................USEFROMS/N4913230~5048024
SPRING, GOVERNOR ......................................1................USE FROM S/N 5048025
SPRING, GOVERNOR
SPRING, THROTTLE RETURN
BOLT, GOVERNOR ARM
NUT, FLANGE, 6MM
1
1
1
1
1
1
5
6
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — decal assy.
page 68 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — decal assy.
NO.
1
2
3♦
3◊
4◊
4◊
4◊
paRT NO.
paRT Name
QTY.
RemaRKs
87533ZC0630
87528ZB2630
87521ZH8020
87521ZH8040
87516ZH7000
87516ZH7010
87516ZH7010
DECAL, AIR CLEANER
DECAL, CHOKE
EMBLEM, 5.5 HP
EMBLEM, 5.5 HP
MARK OPERATOR CAUTION (ENGLISH)........1................USE UP TO S/N 1253961
MARK OPERATOR CAUTION (ENGLISH)........1................USE FROM S/N 1253962
MARK OPERATOR CAUTION (PICTOGRAPH)1
1
1
1
1
♦GX160K1EMA2: Model GAC2.2H, JUNE 2006 AND BELOW
◊ GX160U1EMAN: Model GAC2.2H, FEBUARY 2007 AND ABOVE
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — tOOl Kit
page 70 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
hOnda gX160K1eMa2/u1eMan engine — tOOl Kit
NO.
1
paRT NO.
paRT Name
TOOL KIT...........................................................1................INCLUDES ITEMS W/#
QTY.
RemaRKs
89000ZE1000
89218ZE1000
89219805000
9900110120
9900114170
9900802300
2#
3#
4#
5#
6#
WRENCH COMP. (SPARK PLUG)
HANDLE, BOX WRENCH
SAPNNER, 10X12
1
1
1
1
1
SAPNNER, 14X17
BAG TOOL
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
terMs and cOnditiOns Of sale — parts
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
paYmeNT TeRms
Terms of payment for parts are net 30 days.
FReigHT pOlicY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
special eXpediTiNg seRvice
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
limiTaTiONs OF selleR’s liaBiliTY
miNimum ORdeR
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
ReTuRNed gOOds pOlicY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
limiTaTiON OF WaRRaNTies
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
pRiciNg aNd ReBaTes
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
page 72 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtes
gac2.2H 60 Hz geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 73
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn and parts Manual
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: [email protected]
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Mayco Parts
Warranty Department
800-306-2926
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
800-421-1244, Ext. 279
310-537-3700, Ext. 279
Fax: 310-537-1173
Fax: 310-631-5032
Service Department
Technical Assistance
800-421-1244
310-537-3700
Fax: 310-537-4259
800-478-1244
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [email protected]
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: 0161 339 3226
Global Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: [email protected]
caNada
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [email protected]
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property
of their respective owners and used with permission.
This manual MUST accompany the equipment at all times.This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|