OPERATION AND PARTS MANUAL
SERIES
MODEL MTX70
TAMPING RAMMER
(HONDA GX100UKRBF GASOLINE ENGINE)
Revision #12 (02/22/12)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TABLE OF CONTENTS
MTX70 Tamping Rammer
HONDA GX100UKRBF
Proposition 65 Warning ........................................... 2
Table Of Contents ................................................... 4
Parts Ordering Procedures ..................................... 5
Safety Information ................................................ 6-9
General Information .............................................. 10
Specifications ........................................................ 11
Controls and Components .................................... 12
Basic Engine ......................................................... 13
Operation ......................................................... 14-16
Maintenance ......................................................... 17
Troubleshooting Guide ..................................... 18-19
Explanation Of Codes In Remarks Column .......... 20
Suggested Spare Parts ......................................... 21
Name Plate and Decals ................................... 22-23
Crankcase and Engine Assembly .................... 24-27
Guide Cylinder and Foot Assembly ................. 28-29
Foot Assembly ................................................. 30-31
Tank and Handle Assembly ............................. 32-33
Combination Lever Assembly .......................... 34-35
Tools ................................................................. 36-37
ENGINE
Cylinder Barrel Assembly................................... 38-39
Crankcase Cover Assembly...............................40-41
Crankshaft Assembly .........................................42-43
Piston Connecting Rod ......................................44-45
Camshaft Assembly ...........................................46-47
Recoil Starter Assembly.....................................48-49
Fan Cover Assembly .......................................... 50-51
Carburetor Assy (S/N T-3362 and Below) ..........52-53
Carburetor Assy (S/N T-3363 and Above) .........54-55
Air Cleaner Assembly.........................................56-57
Muffler Assembly ...............................................58-59
Flywheel Ignition Assembly................................ 60-61
Control Assembly ...............................................62-63
Labels Assembly ................................................64-65
Terms and Condition Of Sale
—
Parts .................... 66
Specification and part number are subject
to change without notice.
PAGE 4 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TABLE OF CONTENTS
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
N View Parts Diagrams
N Order Parts
N Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
R
Dealer Account Number
R
Specify Preferred Method of Shipment:
R
R
R
R
R
Dealer Name and Address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
N
N
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
N Next Day
Second/Third Day
Applicable Model Number
N
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
Lethal Exhaust Gases
SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER,WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.
PAGE 6 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — SAFETY INFORMATION
„ ALWAYS know the location of the nearest phone or keep a
phone on the job site. Also, know the phone numbers of
the nearest ambulance, doctor and fire department. This
information will be invaluable in the case of an emergency.
GENERAL SAFETY
CAUTION
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
RAMMER SAFETY
DANGER
„ NEVER operate the equipment in an explosive
atmosphere or near combustible materials.An
explosion or fire could result causing severe
bodily harm or even death.
„ NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
„ NEVER operate this equipment under the influence of
drugs or alcohol.
WARNING
„ NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death.Disconnection of any of these
devices will void all warranties.
„ ALWAYS check the equipment for loosened threads or
bolts before starting.
„ DO NOT use this machine on ground that is harder than
the machine can handle, or for driving pilings or tamping
rock beds. Furthermore, use of the machine on sloping
ground, such as the side of an embankment, may make
the machine unstable and can cause an accident. It can
also result in premature machine wear due to uneven
loads on the machine.
„ DO NOT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
„ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Use the machine with confidence for tamping earth and
sand, soil, gravel, and asphalt.DO NOT use the machine
for other types of jobs.
„ Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
CAUTION
„ NEVER lubricate components or attempt service on a
running machine.
„ NEVER use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
NOTICE
„ ALWAYS keep the machine in proper running condition.
„ ALWAYS know the location of the nearest
fire extinguisher.
„ Fix damage to machine and replace any broken parts
immediately.
„ ALWAYS know the location of the nearest
first aid kit.
„ ALWAYS store equipment properly when it is not being
used.Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — SAFETY INFORMATION
ENGINE SAFETY
DANGER
FUEL SAFETY
DANGER
„ The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
„ DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
„ The engine of this equipment
requires an adequate free flow
of cooling air.NEVER operate
this equipment in any enclosed
or narrow area where free flow
of the air is restricted.If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WARNING
„ DO NOT place hands or fingers inside engine
compartment when engine is running.
„ NEVER operate the engine with heat shields or
guards removed.
„ DO NOT start the engine near spilled fuel or combustible
fluids. Fuel is extremely flammable and its vapors can
cause an explosion if ignited.
„ DO NOT remove the engine oil drain plug
while the engine is hot. Hot oil will gush
out of the oil tank and severely scald any
persons in the general area of the rammer.
„ ALWAYS refuel in a well-ventilated area, away from
sparks and open flames.
„ ALWAYS use extreme caution when working with
flammable liquids.
CAUTION
„ NEVER touch the hot exhaust manifold,
muffler or cylinder.Allow these parts to cool
before servicing equipment.
„ DO NOT fill the fuel tank while the engine is running
or hot.
„ DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
NOTICE
„ NEVER run engine without an air filter or with a dirty air
filter.Severe engine damage may occur.Service air filter
frequently to prevent engine malfunction.
„ Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
„ NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
„ NEVER use fuel as a cleaning agent.
„ DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
PAGE 8 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — SAFETY INFORMATION
TRANSPORTING SAFETY
CAUTION
„ NEVER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
„ Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
„ ALWAYS shutdown engine before transporting.
„ NEVER lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of sufficient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ DO NOT lift machine to unnecessary heights.
„ ALWAYS tie down equipment during transport by
securing the equipment with rope.
„ Never allow any person or animal to stand underneath the
equipment while lifting.
ENVIRONMENTAL SAFETY
NOTICE
„ Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
„ DO NOT use food or plastic containers to dispose of
hazardous waste.
„ DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — GENERAL INFORMATION
Definition of Tamping Rammer
Handle Operation
CAUTION
The Mikasa MTX70 tamping rammer is a powerful
compacting tool capable of applying a tremendous force in
consecutive impacts to a soil surface. Its applications include
soil compacting for road, embankments and reservoirs as
well as backfilling for gas pipelines, water pipelines and cable
installation work.
Before starting operation check the lifting
handle to:
1. Make sure that there is no damage on the bolts.
The impact force of the MTX70 levels and uniformly compacts
voids between soil particles to increase dry density.
2. Make sure that there is no crack or breakage on handle.
3. Make sure that there is no fissure on the surface. If there
is any abnormality or damage, replace with new one.
Circular motion is converted to create impact force. The
MTX70 tamping rammer develops a powerful compacting
force at the foot of the rammer. To maintain optimum
performance, proper operation and service are essential.
For operation:
This handle is to be used to lift up the shoe part of the machine
with the body laid down on the ground or truck bed.
Construction of Tamping Rammer
1. Use proper lifting techniques to avoid back injury. This
handle is for manual lifting only.
The Mikasa MTX70 is equipped with an air cooled, four-
cycle gasoline engine.Transmission of the power takes place
by increasing the engine speed to engage the centrifugal
clutch.
2. Do not use this handle as a rammer lift point. Use the
lifting point on the top of the machine.
Rammer Gearbox and Spring Cylinder
3. Do not move the rammer with the lifting handle and the
front rollers more than 16 feet (5 meters).
The Mikasa MTX70 uses an oil bath lubrication system.
Always check the oil level through the oil level sight glass at
the rear of the tamper foot.
Controls
Before starting the MTX70 Tamping Rammer identify and
understand the function of the controls.
PAGE 10 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — SPECIFICATIONS
Table 1. MTX-70 Rammer Specifications
Overall Height
Overall Width
39.37 in. (1000 mm)
13.78 in (350 mm)
31.02 in (788 mm)
13.4 x 11.2 (340 x 285 mm)
3.2 qt. (3 liters)
0.8 quart (0.75 liter)
10.7 - 11.5
Over Length
Shoe Size
Fuel Tank Capacity
Lubrication Oil Capacity
No. of Impacts Per Second
Impact Force
2,855 lb (12.7 kN)
2 -3.15 in (50 - 80 mm)
165.34 lbs. (75 kg)
104 dB
Impact Plate Stroke
Operating Weight
Measured Sound Power Level
Guaranteed Sound Power Level
Max. Sound Pressure Level
107 dB
94 dB
Table 2. Engine Specifications
Model
Honda GX100UKRBF Engine
Air-Cooled 4 Stroke, Overhead camshaft,
single cylinder gasoline engine
Type
Piston Displacement
Max. Output
6.0 cu.in. (98 cc)
3.0 hp/3,600 rpm (2.2 KW)
3,800 - 4,100 rpm
Max. Governed Speed, No Load
Cooling System
Air-Cooled
Engine Oil Capacity
Fuel
0.3 qt. (0.28 liters)
Unleaded gasoline
Automobile Oil; Class SE or higher
Recoil Starter
Lubricant for Engine
Starting System
Spark Plug Type
NGK CR5HSB
Specifications are general and are subject to change without notice. If exact
measurements are required, equipment should be weighed and measured.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — CONTROLS AND COMPONENTS
3
2
4
10
5
1
9
6
11
7
8
12
13
Figure 1. MTX70 Rammer
Figure 1 shows the location of the controls and components
for the MTX70Tamping Rammer.The functions of each control
is described below:
1. Combination (Throttle) Lever
–
Used to adjust engine
4. Hook – Used to lift rammer for transporting.
speed(rpm).Movelever forward(SLOW)toreduceengine
speed,moveleverbacktowardoperator(FAST)toincrease
speed. Always operate the rammer at full speed (rpm).
5. Air Cleaner Cover – Protects the air cleaner which
prevents dirt and other debris from entering the engine.
6. Roller – Allows rammer to be moved around easily by
2. Handle – To operate rammer, GRIP handle assembly
rolling the unit.
firmly on both sides.
7. Bellows – Reservoir for oil bath.
3. Fuel Tank Cap – Remove this cap to add unleaded
gasolinetothefueltank.Makesurecapistightenedsecurely.
DO NOT over fill.
8. Foot – Laminated wood with tempered steel plate for
superior shock absorption.
9. FuelTank – Holds the fuel for the unit (up to 3.2 quarts)
WARNING
10. Muffler – reduces the noise of the engine when running.
Adding fuel to the tank should be accomplished only
when the engine is stopped and has had an
opportunity tocool down. In the event of a fuel spill,
DO NOT attempt to start the engine until the fuel
residue has been completely wiped up, and the area
surrounding the engine is dry.
11. Engine– thisunitusesaHondaGX100UKRBFgasoline
engine.
12. Oil Gauge (Sight Glass) – Indicates the level of oil in the
oil bath reservoir.
13. Drain Valve – Open this valve to remove oil from the
bellows.
PAGE 12 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — BASIC ENGINE
Figure 1A. Engine Controls and Components
(Honda GX100)
INITIAL SERVICING
The engine (Figure 1A) must be checked for proper lubrication and
filled with fuel prior to operation. Refer to the manufacturers Engine
manual for instructions & details of operation and servicing.
4.
Muffler – Used to reduce noise and emissions.
1.
Choke Lever –Used when starting the engine. Normally
used in cold weather conditions. In cold weather turn the
choke lever to the fully closed position, in warm weather
set choke lever half way or completely open.
WARNING
2.
Spark Plug – Provides spark to the ignition system. Set
spark plug gap to 0.024 - 0.028 inch (0.6 - 0.7 mm). Clean
spark plug once a week.
Engine components can generate extreme heat.
To prevent burns, DO NOT touch these areas
while the engine is running or immediately after operating. NEVER
operate the engine with the muffler removed.
3.
Recoil Starter (pull rope) – Manual-starting method. Pull
the starter grip until resistance is felt, then pull briskly and
smoothly.
5.
Dipstick/Oil Filler Cap – Remove this cap to determine if
the engine oil is low. Add oil through this filler port as
recommended in Table 3.
Operating the engine without an air filter, with a
damaged air filter, or a filter in need of
replacement will allow dirt to enter the engine,
causing rapid engine wear.
6.
Oil Drain Plug – Remove this plug to remove oil from the
engine's crankcase.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — OPERATION
Engine
This section is intended to assist the operator with the initial
start-up of the MTX70 Tamping Rammer. It extremely
important that this section be read carefully before attempting
to operate the rammer.
1. Fill the fuel tank (Figure 3) with unleaded gasoline. At the
same time, check the engine oil and make it a habit to
replenish it often (Figure 4).
DO NOT use your rammer until this section is thoroughly
understood.
FUEL
TANK
CAUTION
Failure to understand the operation of the MTX70Tamping
Rammer could result in severe damage to the unit or
personal injury.
Rammer Crankcase and Spring Cylinder Oil Bath
This unit uses an oil bath lubrication system.Perform the following:
1. Checktheoillevelthroughtheoillevelsightglass(Figure2)
at the rear of the tamper foot.
Figure 3. Fuel Tank
OIL LEVEL
DIPSTICK
OIL FILL PLUG
SIGHT GLASS
OIL DRAIN PLUG
Figure 4. Engine Oil Dipstick
2. Low levels of oil may result in engine seizure due to high
levels of consumption during operations.
Figure 2. Foot Housing Sight Glass
3. Check the engine oil level and if the engine oil level is low,
it should be refilled. Use the proper motor oil as suggested
in theTable 3 below.
2. Ifoilisnotvisible,add10W-30SE,SForhighergrademotor
oil into the oil fill plug opening (Figure 2).The bath contains
approximately 1.7 pints (800 cc.)
Table 3 Motor Oil Grade
Grade of motor oil
Season or Temperature
(higher than MS class)
Spring, Summer or Autumn
SAE 30
The oil level should be kept at the half way point of
the sight glass.
+120° F to +15° F
Winter
SAE 30
+40° F to +15° F
Below +15° F
SAE 10W-30
PAGE 14 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — OPERATION
Inspection
DO NOT press the primer pump bulb more
than four (4) times, as this will cause fuel
to flood the carburetor.
1. Check all nuts, bolts fasteners for tightness. Retighten as
necessary.
2. Clean anydirtfromtherecoil starterand footpedestal. Wipe
the entire unit clean before operating.
3. ReplaceanymissingordamagedSafetyOperationdecals.
3. Place the choke lever to the closed position. When the
weather is cold, close the choke all the way.When it is hot,
or if the engine is hot, open the choke a little or leave it fully
open.
4. Adjustheightofhandle.Adjusthandlebylooseningnutsand
moving handle to suit operation. Retighten nuts.
Initial Start-up
When starting the MTX70 Tamping Rammer perform the
following:
1. Slidethethrottleleverfromthestoptotheidleposition(
)
CHOKE LEVER
(CLOSED POSITION)
(Figure5).Thisopensthefuelcockandtheengineelectrical
circuit is turned on automatically.
Figure 6. Choke Lever
THROTTLE LEVER
(IDLE POSITION)
4. Gripthestarterropehandle (Figure7handleandpullituntil
you feel a slight resistance. Then pull sharply and quickly.
Return the handle to the starter case before releasing.
Figure 5-A. Throttle Lever (Idle {Position)
STARTER
ROPE
2. Units with Carburetor Primer System: Push the
primer pump bulb four (4) times to deliver fuel to the
carburetor (Figure 5-B).
Figure 7. Recoil Starter
5. Ifenginefailstostart,movethechokelever(Figure 6) tothe
half open position to avoid flooding.
6. Repeat steps 1 thru 5.
7. If the engine does not start after repeated attempts,
check thesparkplug for excess fuel. Clean and replace
the spark plug as needed.
Figure 5-B. Primer Pump
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — OPERATION
Operation
Stopping The Engine
Normal Shutdown
1. To start the rammer tamping action, move the throttle lever
(Figure 8) quickly from IDLE to the START ( ) position.
DO NOT move the throttle lever slowly as this may cause
damage to the clutch or spring.
1. MovethrottleleverquicklyfromtheSTARTtoIDLEposition
(Figure9)andruntheengineforthreeminutesatlowspeed.
Aftertheenginecools, movethethrottlelevertotheSTOP
position (Figure 10).The engine will stop and the fuel cock
isautomaticallyclosed.
THROTTLE LEVER
(START POSITION)
THROTTLE LEVER
(STOP POSITION)
Figure 8. Throttle Lever (Start Position)
Figure 10. Throttle Lever (Stop Position)
CAUTION
2. If the engine does not stop due to a problem with the switch
orthelike, movethemachinetoasafelocationandholdthe
throttlelever inthestopposition.Letthemachinerunonidle
and the machine will stop after a few minutes.
Make sure that the throttle lever is moved to the FULL START
position. Operating the rammer at less than full speeds can
result in damage to the clutch springs or foot.
2. The MTX70 tamping rammer is designed to run at 3,800 to
4,100rpm. Atoptimumrpmthefoothitsattheratebetween
590~695impacts per minute. Increasing throttlespeedpast
factorysetrpmdoesnotincreaseimpacts and maydamage
unit.TheMTX70is designedtoadvancewhiletamping.For
faster advance, pull back slightly on the handle so that rear
offootcontactssoilfirst.
3. To stop the tamping action, move throttle lever quickly from
START to IDLE position (Figure 9).
THROTTLE LEVER
(IDLE POSITION)
Figure 9. Throttle Lever (Idle Position)
PAGE 16 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — MAINTENANCE
EVERY200HOURS
Maintenance
■
Remove the oil drain plug on foot housing (Figure 13) and
drain the oil. Refill with approximately 1.7 pt. (800 cc.) of
10W-30 SE, SF or higher grade motor oil. Oil should be
midway in sight glass. Break in oil should be changed after
first 50 hours.
Performthescheduledmaintenanceproceduresasindicated:
DAILY
■
■
■
Thoroughly remove dirt and oil from the engine and control
area.
Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary.
OIL FILL PLUG
SIGHT GLASS
Check the spring box and bellows for oil leaks. Repair or
replace as needed.
OIL DRAIN PLUG
EVERY50HOURS
■
Remove the fuel filter cap and clean the inside of the fuel
tank (Figure 11).
Figure 13. Oil Drain Plug
EVERY2YEARS
■
Replace the fuel line every 2 years even if there is no visible
damage.
FUEL FILTER
Long Term Storage
■
■
■
Slide the throttle lever to the STOP position.
Drain any fuel including in the fuel hose.
Figure 11. Fuel Filter
■
Remove and clean the spark plug, then adjust the spark gap
to 0.024~0.028 inch (0.6~0.7 mm).
Replace lubrication oil and apply grease to lubrication
points.
EVERY 80 to 100 HOURS
■
■
Cover the air intake on the air cleaner and the exhaust outlet
on the muffler.
■
Remove the air cleaner cover. Loosen and remove the 2
screws that hold the cover to the air cleaner assembly. If the
primary element (Figure 12) is dirty, wash it with gasoline or
kerosene.Then dip it in engine oil (SAE10W-30) and wring
the element so that 25 to 30 cc of engine oil remains on the
element.
Store unit indoors covered with plastic sheet in moisture
free and dust free location out of direct sunlight.
PRIMARY
ELEMENT
Figure 12. Air Cleaner Primary Element
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TROUBLESHOOTING GUIDE
TABLE 4. ENGINE TROUBLESHOOTING
SYMPTOM
Difficult to start
POSSIBLE PROBLEM
SOLUTION
Ignition plug being bridge?
Carbon deposit at ignition?
Check ignition system.
Clean or replace ignition.
Replace insulators.
Fuel is available but spark plug
will not ignite. (Power available
at high tension cable).
Short circuit due to defective
insulators?
Improper spark gap?
Set spark plug gap to the correct gap.
Check stop switch circuit. Replace stop switch if defective.
Replace ignition coil.
Short circuit at stop switch?
Ignition coil defective?
Fuel is available but spark plug
will not ignite. (Power NOT
available at high tension cable).
Muffler clogged with carbon
deposits?
Clean or replace muffler.
Fuel is available and spark plug
ignites (compression normal).
Fuel in use inadequate (water,
dust)?
Flush fuel sytem and replace with fresh fuel.
Air Cleaner clogged?
Cylinder worn?
Clean or replace air cleaner.
Replace cylinder.
Fuel is available and spark plug
ignites (compression low).
Spark plug loose?
Tighten spark plug.
Low compression.
Incorrect valve adjustment?
Check and adjust valves.
Operation not satisfactory
Air cleaner clogged?
Air in fuel line?
Clean or replace air cleaner.
Not enough power available
(compression normal, no miss-
firing).
Bleed (remove air) from fuel line.
Clean or replace cylinder
Carbon deposits in cylinder?
Ignition coil defective?
Ignition plug often shorts?
Flush fuel sytem and replace with fresh fuel.
Replace ignition wires, clean ignition.
Flush fuel sytem and replace with fresh fuel.
Not enough power available
(compression normal, miss-
firing).
Fuel in use inadequate (water,
dust)?
Excessive carbon depostion in
combustion chamber?
Clean or replace crankcase.
Clean or replace muffler.
Engine overheats.
Exhaust or muffler clogged with
carbon.
Spark plug heat value incorrect? Replace spark plug with correct type spark plug.
Incorrect engine RPM? Check and adjust engine RPM to 3900-4100 RPM.
Engine high speed incorrect.
PAGE 18 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TROUBLESHOOTING GUIDE
ENGINE
TABLE 4. ENGINE TROUBLESHOOTING (continued)
POSSIBLE PROBLEM
SYMPTOM
SOLUTION
Operation not satisfactory
Governor adjustment improper?
Governor spring defective?
Fuel flow erratic?
Adjust governor to correct lever.
Clean or replace ignition.
Check fuel line.
Rotational speed fluctuates.
Air taken in through suction
line?
Check suction line.
Dust in rotating part?
Spring spring failure?
Clean recoil starter assembly.
Replace sprial spring.
Recoil starter not working
properly.
TABLE 5. RAMMER TROUBLESHOOTING
POSSIBLE PROBLEM
SYMPTOM
SOLUTION
Operating speed of throttle lever Set throttle lever to correct position.
is incorrectly set?
Oil in excess?
Drain excess oil. Bring to correct level.
Replace or adjust clutch.
Clutch slips?
Engine runs but rammer jumps
erratically or not at all..
Spring Failure?
Replace sprial spring.
Speed of engine improper?
Soil over-compacted?
Adjust engine speed to correct operating RPM setting.
Shut-down machine and test soil.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70—EXPLANATION OF PARTS SECTION REMARKS
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 20 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70— SUGGESTED SPARE PARTS
MTX70 RAMMER 1 TO 3 UNITS WITH HONDA
GX100UKRBF ENGINE
Qty.
P/N
Description
1 ......... 956100062 ....... THROTTLEWIRE
3 ......... 366010070 ....... SECONDARY ELEMENT, AIR CLEANER
3 ......... 366010080 ....... PRIMARY ELEMENT, AIR CLEANER
1 ......... 366900020 ....... CAP, FUEL TANK W/ STRAP
2 ......... 16910Z4ES21.. FILTER, IN-LINE FUEL
3 ......... 9805655757 ..... SPARK PLUG
1 ......... 959300770 ....... STRAINER, FUEL TANK
1 ......... 28462Z0DV02 .. ROPE, RECOIL STARTER
Part numbers on this Suggested Spare
Parts List may supersede/replace the P/N
shown in the text pages of this book.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70— NAMEPLATE AND DECALS
1
NAME PLATE AND DECALS
4
7
NPA-0000
?
?
?
?
?
?
?
NPA-1245
2
3
5
STOP
NPA-0000
NPA-0000
6
11
MODEL
SERIAL NO.
A (DECAL SET)
8
MTX
series
RAMMER
quick manual
Engine Oil
Use SAE 10W/30,SE or higher grade motor oil
RAMMING CYLINDER OIL
Use SAE 10W/30,SF or higher grade moter oil
Fuel
Use normal quality gasoline
PAGE 22 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70— NAMEPLATE AND DECALS
NAME PLATE AND DECALS
NO
A
PART NO
PART NAME
QTY.
REMARKS
920900040
DECAL SET .....................................1.......... INCLUDES ITEMS W/ #
1#
2#
3#
4#
5#
6#
7#
8
DECAL:OPERATION
1
1
1
1
1
1
1
1
DECAL: AIR CLEANER
DECAL: LEVER OPERATION
DECAL: MAX SPEED
DECAL: MACHINE STOP
DECAL: EC NOISE REQ
DECAL: ANTI-VIB HANDLE
QUICK MANUAL
920212540
11
DECAL: NAMEPLATE ...................... 1.......... CONTACT MQ PARTS DEPT W/ SERIAL NO.
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
48
45
49
46
46
49
36-4
36-3
36-2
70-1
70-2
70-3
36-1
36
36-7
36-9
36-8
65
69
71
41
42-1
42-2
42-3
73
75
36-5
54-1
74
61
54-2
39 37
32-1
32-1
40
54
38
23
43-2
NEW
43-1
34
50
STYLE
111
CLUTCH
51
55
35
72
51
31
OLD
56
57-2
57-1
24
25-2
STYLE
CLUTCH
33
50
25-1
23
60
47
29
26
4
5
28
59
2
2
1
58
62
A
61
55
56
58
53
63
17
16
9
57-2
14
57-1
A
101
11
10
12
3
7
6
19
106
15
13
76
20
21
PAGE 24 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
NO.
1
PART NO.
366910010
009120204
041006007
366345170
060404010
080200350
080100620
040006304
040006207
080100720
080200350
080200250
366345230
040006304
080100520
080200200
047940060
050710080
001520825
366346210
366348550
952401450
001220825
030208200
366217180
001710830
022611010
366346280
001211030
030210250
939010270
030208200
020308060
366900010
366010010
366010020
366010030
366010040
366010050
366010070
366010080
366030040
366345470
954407681
954407682
366460160
366460150
PART NAME
QTY.
REMARKS
CRANK CASE.................................... 1............... INCLUDES ITEMS W/ $
2$
STUD BOLT 10 X 30
BEARING 6007Z
DRUM, PINION
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
3
4
5
OIL SEAL TC-40528
STOP RING S-35
STOP RING R-62
BEARING 6304
6
7
9
10
BEARING 6207
11
STOP RING R-72
STOP RING S-35
STOP RING S-25
CONNECTING ROD
BEARING 6304
12
13
14
15
16
STOP RING R-52
STOP RING S-20
NEEDLE BEARING FJ-1816
O-RING
SOCKET HEAD BOLT 8X25 T
CLUTCH ASSY ..................................1............... S/N S-1390 AND BELOW
CLUTCH ASSY ..................................1............... S/N S-1391 AND ABOVE
17
19
20
21
23
23
24
WASHER, 5X22X3
BOLT 8X25 T
1
1
1
1
4
4
1
4
4
1
1
1
25-1
25-2
26
WASHER, LOCK M8
FLANGE, ENGINE
FLANGE BOLT 8X30
FLANGE NUT M10
BRACKET, SHOCK ABSORBER
BOLT 10X30
WASHER, LOCK M10
STOPPER RUBBER (70)
WASHER, LOCK M8
NUT M8
CRANKCASE CP............................... 1............... INCLUDES ITEMS W/ #
AIR CLEANER COVER CP
WASHER, FLAT M6
WASHER, LOCK M6
COIN BOLT M6
28
29
31
32-1
32-2
33
34
35
36
36-1#
36-2#
36-3#
36-4#
36-5#
36-7#
36-8#
36-9#
37
1
2
2
2
1
1
1
1
1
1
1
1
1
BASE CP, AIR CLEANER
PRIMARY ELEMENT CP
SECONDARY ELEMENT
GRIP BELT CP
PIPE, INTAKE
38
CYCLONE CLAMP (CY-1) 45
CYCLONE CLAMP (CY-1) 38
SEALING FORM, UNDER
SEALING FORM, SIDE
39
40
41
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
48
45
49
46
46
49
36-4
36-3
36-2
70-1
70-2
70-3
36-1
36
36-7
36-9
36-8
65
69
71
41
42-1
42-2
42-3
73
75
36-5
54-1
74
61
54-2
39 37
32-1
32-1
40
54
38
23
43-2
NEW
43-1
34
50
STYLE
111
CLUTCH
51
55
35
72
51
31
OLD
56
57-2
57-1
24
25-2
STYLE
CLUTCH
33
50
25-1
23
60
47
29
26
4
5
28
59
2
2
1
58
62
A
61
55
56
58
53
63
17
16
9
57-2
14
57-1
A
101
11
10
12
3
7
6
19
106
15
13
76
20
21
PAGE 26 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
NO.
42-1
42-2
42-3
43-1
43-2
45
PART NO.
PART NAME
BOLT 8X55 T
QTY.
2
REMARKS
001220851
030208200
031108160
001210815
030208200
366217340
366460140
366217350
366345980
050200060
009110040
959407670
366118890
366118900
022910260
366460170
001520820
031108160
009110038
366217360
009110039
022910250
366118910
009110038
366900032
956100062
001220620
030206150
031106100
020306050
959006120
366460110
2067550101
959021810
454010020
366345190
366010110
366010111
912210012
WASHER, LOCK M8
WASHER, FLAT M8
BOLT 8X15
WASHER, LOCK M8
COVER, CLEANER (UPPER)
RUBBER BUSH 10X16X17
COVER, CLEANER (LOWER)
KNOB, CLEANER COVER
O-RING P6
FLANGE BOLT 8X20
SQUARE NUT M8
GUARD, LINK
GUARD, MUFFLER
WELL NUT, M8
FLANGE COLLAR 8
SOCKET HEAD BOLT 8X20 T
WASHER, FLAT M8
SOCKET HEAD BOLT 8X30 ZN
EX BAR
SOCKET HEAD BOLT 6X25 ZN
WELL NUT M6
GUARD, ENGINE
SOCKET HEAD BOLT 8X30 ZN
COMBINATION LEVER ASSY W/ WIRE ......1 ................. INCLUDES ITEMS W/@
THROTTLEWIRE
BOLT 6X20 T
WASHER, LOCK M6
WASHER, FLAT M6
NUT M6
CLIP (TCP2-10509B)
WIRE HARNESS
CLAMP
2
2
2
2
1
46
2
47
1
48
2
49
2
50
4
51
4
53
1
54
1
55
2
56
2
57-1
57-2
58
4
4
2
59
1
60
4
61
4
62
1
4
63
65
69@
70-1
70-2
70-3
71
1
2
2
2
2
1
1
2
1
3
1
72
73
74
75
SPIRAL TUBE KEP6/L=500
CLAMP,TC-100
CRANK GEAR
FRONT COVER ............................................1 ................. S/N S-1392 AND BELOW
FRONT COVER ............................................1 ................. S/N S-1393 AND ABOVE
ENGINE, GX100UKRBF
76
101
106
106
111
1
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — GUIDE CYLINDER AND SPRING ASSY.
GUIDE CYLINDER AND FOOT ASSY.
32
1
2
20
22
3
9
21
12
24
27
8
17
14
18
28
26
25
29
13
15
16
23
29
9
27
28
25
26
7
24
31
30
4
6
5-2
51
52
5-1
53
PAGE 28 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — GUIDE CYLINDER AND SPRING ASSY.
GUIDE CYLINDER AND FOOT ASSY.
NO.
1
PART NO.
366460100
366459910
366346000
371459690
001221230
030212300
952404790
355447260
366459900
366459730
366345990
366217210
050100900
001521020
001521040
953405270
953405260
366217440
050710070
002211035
354010010
050931500
354336352
354442340
001220840
020308060
354446170
953405270
953405260
050200950
366118590
366460300
953404670
PART NAME
QTY.
1
2
1
1
1
1
1
1
1
2
1
1
1
4
4
1
1
1
1
4
1
2
2
2
2
2
2
1
1
1
1
1
1
REMARKS
PISTON PIN
2
PLUG, PISTON PIN0
PISTON ROD
PISTON END
BOLT 12X30 T
WASHER, LOCK M12
WASHER 13306
STOPPER, LOWER
STOPPER, BOTTOM
MAIN SPRING
SPRING CYLINDER
FOOT PLATE 12
O-RING G-90
SOCKET HEAD BOLT 10X20 T
SOCKET HEAD BOLT 10X40 T
PLUG 1/4X14 13L
PACKING 1/4 (CU)
GUIDE CYLINDER
O-RING AS568-344
BOLT 10X35 H,SW
BELLOWS, ORANGE
O-RING JASO3150
BELLOWS CLAMP(1.6T)171D
BAND GUIDE, BELLOWS
BOLT 8X40 T
3
4
5-1
5-2
6
7
8
9
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
29
30
31
32
51
52
53
NUT M8
PIN 6D-8.5L
PLUG 1/4X14 13L
PACKING 1/4 (CU)
O-RING P-95
PROTECTION SLEEVE
OIL GAUGE ASSY
COPPER PACKING 17X25.5X1
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — FOOT ASSY.
FOOT ASSY.
2
3
6
2
3
1
4
5
PAGE 30 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — FOOT ASSY.
FOOT ASSY.
NO.
1
PART NO.
PART NAME
QTY.
REMARKS
366910020
022711214
030212300
009110034
009110035
363343390
FOOT ASSY 285
1
4
4
2
2
1
2
NYLON NUT M12
3
4
5
6
WASHER, LOCK M12
BOLT, SQUARE NECK 12X65
BOLT, SQUARE NECK 12X95
GRIP HANDLEBAR
ON NUT M10
7
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
9
10
54
51
53
56
16
FOR CARBURETORS
22
WITHOUT PRIMING BULBS
14
55
A
15
110
1
16
B
FOR CARBURETORS
WITH PRIMING BULBS
A
18
17
3
12
11-2
11-1
110
1
12
11-2
11-1
4-1
4-2
112
7
6
13
111
B
11-2
11-1
40
5
43
101
20
～
103
101
41
19
A
43
4-2
4-1
～
42
102
20
41
42
101
104
113
112
106
1
101
2-2
NOTES
2-1
ITEM 110, PRIMER PUMP KIT,
FOR USE ON UNITS WITH
S/N T-3363 AND ABOVE
1
PAGE 32 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
NO.
1
2-1
2-2
3
4-1
4-2
5
6
7
9
10
11-1
11-2
12
13
14
15
16
16%
17
PART NO.
366346270
001521020
033121009
366119040
001211020
030210250
939010270
030208200
020308060
366900020
366118700
001210815
030208200
952401450
031108160
954406010
366459790
366345280
366349420
020305040
030205130
959026122
954406420
009110037
366910030
366217170
091005020
022610505
955010311
955010305
366345620
454010020
954010270
954406420
16910Z4ES21
959026103
950014500150M
950033606020
366900060
PART NAME
QTY.
2
4
4
1
4
4
1
1
1
1
1
3
3
2
1
1
REMARKS
SHOCK ABSORBER W/PIN
SOCKET HEAD BOLT 10 X 20 T
TOOTHED LOCK WASHER B M10
HANDLE / MTX70
BOLT 10 X 20 H
WASHER, LOCK M10
STOPPER RUBBER (70)
WASHER, LOCK M8
NUT M8
CAP ASSY, FUEL TANK
FUEL TANK / MTX70
BOLT 8X15 H
WASHER, LOCK M8
WASHER 8.5 X 22 X 3
WASHER, FLAT M8
STRAINER #110
PACKING, FUEL TANK
HOLDER, FILTER .............................................1...............S/N T-3362 AND BELOW
HOLDER, FILTER W/V......................................1...............S/N T-3363 AND ABOVE
1
NUT M5
3
3
1
2
2
18
19
20
22
WASHER, LOCK M5
FUEL HOSE L=70
HOSE BAND 10.5
TAPPING SCREW 5 X 20
ROLLER ASSY W/SCREW...............................1...............INCLUDES ITEMS W/#
ROLLER
40
41#
42#
43#
51
53
54
2
4
4
1
1
1
5
1
4
1
1
1
1
SCREW 5 X 20
FLANGE NUT M5 H
TP22TACHO/HOUR METER
CURL CORDTP22
FINISHER,METER
CLAMPTC100
55
56
CLIP AB-3N
101
102
103
104
106
110
HOSE BAND 10.5
STRAINER, FUEL
FUEL HOSE 5.5 X 11.5 X 80
FUEL HOSE (1M)
TUBE, VINYL L260
PRIMER PUMP KIT / NO CARB ......................1...............INCLUDES ITEMS W/%
............................................................................................S/N T-3363 AND ABOVE
RETURN HOSE 3 X 6 X 600 ............................1...............S/N T-3363 AND ABOVE
HOSE CLIP.......................................................5...............S/N T-3363 AND ABOVE
SPIRAL TUBE 6D-200L ....................................1...............S/N T-3363 AND ABOVE
111% 959028301
112% 954408170
113% 959021814
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
A
4
7
8
3
7
11
1
13
10
2
BODY
5
14
11
6
12
9
NOTES
OLD STYLE LEVER BODY NO LONGER
AVAILABLE. NEW STYLE ITEMS 1, 2, AND 9
ARE NOT COMPATIBLE WITH OLD STYLE
BODY. IF REPLACEMENT OF ITEMS 1, 2
OR 9 IS REQUIRED, ORDER KIT “A”.
OLD
NEW
STYLE
LEVER
STYLE
LEVER
TO DETERMINE IF COMBINATION LEVER
ASSY IS OLD STYLE OR NEW STYLE, SEE
ITEM 2, LEVER. NEW STYLE LEVER HAS
MOLDED TAB AT BOTTOM.
MOLDED
TAB
PAGE 34 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 — COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
A
366900032
COMB. LEVER ASSY W/ THROTTLE WIRE ...... 1 ........ INCLUDES ITEMS W/ #
....................................................................................... REPLACES 366900030
COMB. LEVER ................................................... 1 ........ INCLUDES ITEMS W/@
FUEL COCK ....................................................... 1 ........ SEE NOTE ON DRAWING
FUEL COCK ....................................................... 1 ........ NEW STYLE, SEE NOTE ON DRAWING
LEVER ................................................................ 1 ........ SEE NOTE ON DRAWING
LEVER ................................................................ 1 ........ NEW STYLE, SEE NOTE ON DRAWING
A
1
1#@
2
2#@
3#@
4#@
5#@
6#@
7#@
8#@
9
956200110
366346260
366349430
366010180
366010310
366010190
366010200
366010210
366010220
020408050
959407650
366010260
366010320
956100062
SLIDER
END CAP
WIRE CAP
BOLT AND WASHER SET
NUT M8, H=5
SOCKET HEAD SCREW/TH.WIRE
STOP SWITCH ................................................... 1 ........ SEE NOTE ON DRAWING
STOP SWITCH ................................................... 1 ........ NEW STYLE, SEE NOTE ON DRAWING
THROTTLEWIRE
1
1
1
1
2
1
9#@
10#
1
4
1
1
1
11#@ 094010051
12#@ 094010052
13#@ 050200150
14#@ 050200110
TAPPING SCREW B1 4X12
TAPPING SCREW B1 4X30
O-RING, P15
O-RING, P11
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TOOLS
TOOLS
PAGE 36 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MTX70 —TOOLS
TOOLS
NO.
1
PART NO.
981010400
983010060
983910090
009110044
PART NAME
QTY.
REMARKS
CLUTCH PULLER A
1
1
1
2
CLUTCH MOUNTER
3
4
PISTON ROD HOLDER
SOCKET HEAD BOLT 8X50 (FULL THREAD)
CRANK GEAR REMOVER
CLUTCH PULLER B
SPRING CYLINDER REMOVER
PISTON END REMOVER
2
1
1
1
5
6
7
983910020
983010040
983910010
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CYLINDER BARREL ASSY.
PAGE 38 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
2@
3@
5
6
7
8
9
PART NO.
PART NAME
BARREL ASSY., CYLINDER .............................1................INCLUDES ITEMS W/@
QTY.
REMARKS
12000Z0DV00
12201Z0D305
12204Z0D305
12311Z0D000
12355Z0D000
12365Z0D000
15571Z0DV71
15572ZM7000
15721Z0DV70
90014952000
GUIDE ASSY., EX VALVE (O.S.)
GUIDE, INLET VALVE (O.S)
COVER, HEAD T
1
1
1
1
1
1
1
1
6
1
1
1
1
1
COVER COMP A, BREATHER
COVER COMP B, BREATHER
VALVE, OIL OUTLET
PLATE, STOPPER
10
11
TUBE, BREATHER
VOLT, FLANGE 6X14 (CT200)
OIL SEAL 20X32X6
SCREW 3X5
12@ 91202KJ9003
13
14
15
16
93500030050A
9805655757
15171Z0DV00
90008ZM7000
PLUG, SPARK (U16FSR-UB)
PIPE, BREATHER
BOLT 4X10
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CRANKCASE COVER ASSY.
MTX70 -2D ROBIN ENGINE— CRANKSHAFT APISTON
PAGE 40 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
1
3
4#
5@
9@
10
11
12
PART NO.
PART NAME
COVER ASSY., CRANK CASE..........................1................INCLUDES ITEMS W/@
OIL FILLER CAP ASSY.....................................2................INCLUDES ITEMS W/#
QTY.
REMARKS
11300Z0D409
15600ZM7003
15625ZE1003
16510ZL8000
16531ZE1000
16541Z0D000
90121952000
90131ZE1000
— E— CRANKSHAFT AND PISTON
PACKING, OIL FILLER CAP
GOVERNOR ASSY.
SLIDER, GOVERNOR
SHAFT, GOVERNOR ARM
FLANGE BOLT 6x25
BOLT, DRAIN PLUG
THRUST WASHER 6 MM
WASHER, DRAIN PLUG
CLIP, GOVERNOR HOLDER
OIL SEAL 20x3x6
PLAIN WASHER 6 MM
LOCK PIN
KNOCK PIN
BEARING, RADIAL BALL 6204
FLANGE JOINT PTO
OIL SEAL 6x11x4
2
1
1
1
8
1
1
1
1
1
2
1
2
1
1
1
2
4
2
13@ 90451ZE1000
14 90601ZE1000
15@ 90602ZE1000
16@ 91202KJ9003
17@ 9410106800
18
19
9425108000
9430108200
21@ 91001Z0DV01
23
24
26
27
28
11511Z0DV10
91231891003
9430306100
957010804500
934021004000
KNOCK PIN 6x10
FLANGE BOLT 8x40
BOLT WASHER 10x40
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CRANKSHAFT ASSY.
3
85.3
6
PAGE 42 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
3
6@
PART NO.
13310Z0DV70
91001Z0DV01
PART NAME
CRANK SHAFT COMP.......................................1................INCLUDES ITEM W/ @
BEARING, RADIAL BALL
QTY.
REMARKS
2
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — PISTON CONNECTING ROD ASSY.
PAGE 44 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — PISTON CONNECTING ROD ASSY.
PISTON CONNECTING ROD ASSY.
NO.
1
2
3
4
4
5@
6
PART NO.
PART NAME
QTY.
REMARKS
13010Z0D003
13101Z0D000
13111ZE0000
13200Z0D000
13200Z0D305
90001ZM7000
90551ZE0000
RING SET, PISTON
PISTON
PISTON PIN
CONNECTING ROD ASSY.
CONNECTING ROD ASSY.
CONNECTING ROD BOLT
CLIP, PISTON PIN 13MM
1
1
1
1
1
2
2
INCLUDES ITEM W/ @
UNDERSIZE, INCLUDES ITEM W/ @
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CAMSHAFT ASSY.
PAGE 46 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE —CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
1
1
1
1
1
2
1
1
2
2
2
2
1
1
REMARKS
14320Z0D010
14324Z0D000
14400Z0D003
14431Z0D000
14441Z0D000
14461ZL8000
14711Z0D000
14721Z0D000
14751Z0D000
14771ZM3010
90012333000
90206001000
91301ZM0V31
12209KT7013
PULLEY, COMP., CAMSHAFT
SHAFT, CAM PULLEY
TIMING BELT (61YU7 G-200)
ROCKER ARM, INTAKE VALVE
ROCKER ARM, EXHAUST VALVE
SHAFT, ROCKER ARM
INLET VALVE
EXHAUST VALVE
SPRING, VALVE
RETAINER, VALVE SPRING
SCREW, TAPPET ADJUSTING
NUT, TAPPET ADJUSTING
O RING 6.8X1.9
9
10
11
12
13
14
SEAL, VALVE STEM
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — RECOIL STARTER ASSY.
PAGE 48 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
1
PART NO.
28400Z0DV03ZA RECOIL STARTER ASSY..................................1................INCLUDES ITEMS W/ @
PART NAME
QTY.
REMARKS
2@
3@
4@
5@
6@
7@
8@
9@
28410Z0DV02ZA CASE COMP., RECOIL @5-3-5
1
1
1
1
1
1
1
1
1
1
1
1
28421Z0DV02
28422ZG0W02
28433ZG0W02
28441ZW6003
28442ZH8003
28461ZH8003
28462Z0DV02
REEL, RECOIL STARTER
RATCHET, STARTER
GUIDE, RATCHET
SPRING, FRICTION
SPRING, RECOIL STARTER
STARTER KNOB
ROPE, RECOIL STARTER
PLATE, SIDE
PLATE, SLIDE
10@ 28467Z0DV02
11@ 28468Z0DV02
12@ 90003ZH8003
SET SCREW
BOLT, FLANGE 6X8
13
957010600800
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — FAN COVER ASSY.
PAGE 50 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
3
PART NO.
19610Z0DV00ZB FAN COVER CP.
90014952000 BOLT, FLANGE 6X14 (CT200)
PART NAME
QTY.
1
4
REMARKS
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CARBURETOR ASSY. (S/NT-3362 AND BELOW)
33
38
37
17
16
11
10
36
18
2
9
35
15
31
19
20
38
34
24
32
21
4
28
5
26
12
7
29
30
1
6
31
23
25
3
27
8
14
13
40
39
42
25
40
PAGE 52 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CARBURETOR ASSY. (S/NT-3362 AND BELOW)
CARBURETOR ASSY. (S/N T-3362 AND BELOW)
NO.
1@
2@
3@
4@
5@
6@
7@
8@
9@
PART NO.
PART NAME
GASKET, METALING DIAPHRAGM
GASKET, PUMP
DIAPHRAGM ASSY, METALING
DIAPHRAGM, PUMP
SCREEN, INLET
VALVE, INLET NEEDLE
PIN, METALING LEVER
LEVER, METALING
SPRING, PUMP
COVER, PUMP
SCREW
SPRING
COVER, METALING DIAPHRAGM
SCREW
STOPPER, THROTTLE LEVER
LEVER, THROTTLE
SCREW, VALVE
SPACER, THROTTLE LEVER
SCREW, IDLE ADJUSTING
SPRING
VALVE, THROTTLE
SHAFT, THROTTLE
CLIP, THROTTLE SHAFT
SCREW, VALVE
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
2
REMARKS
16010Z0DV02
16011Z0DV02
16013Z0DV02
16014Z0DV02
16018ZM3004
16019ZM3004
16022ZM3014
16023Z0DV02
16030ZM3004
10@ 16040Z0DV02
11@ 16041Z0DV02
12@ 16042Z0EV92
13@ 16043Z0DV02
14@ 16044Z0DV02
15@ 16045Z0DV02
16@ 16046Z0DV73
17@ 16054Z0DV02
18@ 16048Z0DV02
19@ 16049Z4ES12
20@ 16050Z0DV02
21@ 16051Z0DV02
22@ 16052Z0DV02
23@ 16053Z0DV02
24@ 16054Z0DV02
25@ 16055Z0DV02
26@ 16056Z0DV02
27@ 16057Z0DV02
28@ 16058Z0DV72
29@ 16059Z0DV03
30@ 16060Z0DV02
31@ 16061Z0DV02
SCREW ASSY
SPRING
BALL
SHAFT ASSY, CHOKE
VALVE, CHOKE
SCREW
SEAL, DUST
32
33
34
35
36
37
38
39
40
42
16100Z4ES13
16211Z0DV00
16212Z0DV00
16213Z4ES10
16214Z0DV00
16215Z0DV00
16221Z0DV00
950014527050
950024085008
16552896650
CARBURETOR ASSY. (HAD 201C)..................1................INCLUDES ITEMS W/ @
INSULATOR, CARBURETOR
PACKING, INSULATOR
INSULATOR B, CARBURETOR
PACKING B, INSULATOR
PLATE, INSULATOR
1
1
1
1
1
2
1
2
1
PACKING, CARBURETOR
HOSE, FUEL 4.5 X 270
CLAMP, TUBE
COLLAR, LEVER
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CARBURETOR ASSY.(S/NT-3363 AND ABOVE)
PAGE 54 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CARBURETOR ASSY.(S/NT-3363 AND ABOVE)
CARBURETOR ASSY. (S/N T-3363 AND ABOVE)
NO.
1@
2@
3@
4@
5@
6@
7@
PART NO.
PART NAME
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
REMARKS
16010Z0DV02
16011Z0DV02
16013Z4ES32
16014Z0DV02
16018ZM3004
16019ZM3004
16022ZM3014
16023Z0DV02
16030ZM3004
16040Z4E802
16041Z0DV02
16042Z0DV02
16044Z4E802
16045Z0DV02
16046Z0DV73
16048Z0DV02
16049Z4ES12
16050Z0DV02
16051Z0DV02
16052Z0DV02
16053Z0DV02
16054Z0DV02
16055Z0DV02
16056Z0DV02
16057Z0DV02
16058Z0DV02
16059Z0DV03
16060Z0DV02
16061Z0DV02
16100Z4ES43
16211Z0DV00
16212Z0DV00
16213Z4ES10
16214Z0DV00
16215Z0DV00
16221Z0DV00
16552896650
950014527050
950024085008
99101Z0D0480
99101Z0D0500
99101Z0D0520
950033602620
16017Z4ES32
16026Z4ES32
16032Z4ES32
16055Z4ES32
GASKET, METERING DIAPHRAGM
GASKET, PUMP
DIAPHRAGM ASSY, METERING
DIAPHRAGM, PUMP
SCREEN, INLET
VALVE, INLET NEEDLE
PIN, METERING LEVER
LEVER, METERING
SPRING, PUMP
COVER, PUMP
SCREW
SPRING
SCREW
STOP, THROTTLE
LEVER, THROTTLE
SPACER, THROTTLE LEVER
SCREW, IDLE ADJUSTING
SPRING
VALVE, THROTTLE
SHAFT, THROTTLE
CLIP, THROTTLE SHAFT
SCREW, VALVE
SCREW ASSY
SPRING
BALL
SHAFT ASSY, CHOKE
VALVE, CHOKE
SCREW
8@
9@
10@
11@
12@
14@
15@
16@
17@
18@
19@
20@
21@
22@
23@
24@
25@
26@
27@
28@
29@
30@
31
SEAL, DUST
CARBURETOR ASSY (W/PRIMER).........................1................. INCLUDES ITEMS W/@
32
33
34
35
36
37
38@
39
INSULATOR, CARBURETOR
PACKING, INSULATOR
INSULATOR B, CARBURETOR
PACKING B, INSULATOR
PLATE, INSULATOR
PACKING, CARBURETOR
COLLAR, LEVER
HOSE, FUEL 4.5 X 270
CLAMP, TUBE
JET (#48)..................................................................1................. OVER 7000
JET (#50)..................................................................1................. 5000-7000
JET (#52)..................................................................1................. STANDARD
TUBE, VINYL. 11 X 13 X 260
BODY ASSY, AIRPURGE
COVER, PRIMER PUMP
PUMP, PRIMER
1
1
1
1
1
2
1
1
2
40
41@
41@
41@
42
44@
45@
46@
47@
1
1
1
1
4
SCREW ASSY
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — AIR CLEANER ASSY.
8
14
10
11
PAGE 56 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
8
10
11
14
PART NO.
PART NAME
PACKING, AIR CLEANER
STUD BOLT 5X95
FLANGE NUT 5MM
ELBOW, AIR CLEANER
QTY.
REMARKS
17228Z0DV01
90042Z4ES30
9405005000
17410Z4ES30
1
2
2
1
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — MUFFLER ASSY.
PAGE 58 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
PART NO.
PART NAME
MUFFLER COMP.
MUFFLER PROTECTOR
GASKET, MUFFLER
VOLT, FLANGE 6X14 (CT200)
STUD BOLT 5X78
QTY.
REMARKS
18310Z0DV20
18321Z0DV20
18381Z0D000
90014952000
90048Z0DV00
90343ZE6000
1
1
1
3
2
2
5
6
NUT, SELF-LOCK 6MM
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — FLYWHEEL IGNITION ASSY.
3
7
7
12
4
11
1
10
9
PAGE 60 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — FLYWHEEL IGNITION ASSY.
FLYWHEEL IGNITION ASSY.
NO.
1
3
4
7
PART NO.
PART NAME
QTY.
REMARKS
13331ZM7000
30564ZA5000
31110Z0D003
90022888010
9405012000
28451Z0DV02
30500Z0DV02
30700Z0DV01
WOODRUFF KEY 25X18
GROMMET, CORD
FLYWHEEL COMP.
FLANGE BOLT 6X20
FLANGE NUT M12
STARTER PULLEY
1
1
1
2
1
1
9
10
11
12@
IGNITION COIL ASSY.......................................1................INCLUDES ITEMS W/ @
TERMINAL ASSY.
1
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CONTROL ASSY.
3
17
5
20
11
15
10
19
4
9
12
20
6
11
8
8
PAGE 62 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
3
4
5
6@
8
PART NO.
PART NAME
QTY.
REMARKS
16555Z0DV00
16561Z0DV00
16562Z0DV00
16594883010
90014952000
90015ZE5010
GOVERNOR ROD
GOVERNOR SPRING
SPRING, THROTTLE RETURN
HOLDER, WIRE
VOLT, FLANGE 6X14 (CT200)
BOLT, GOVERNOR ARM
CIR CLIP
BOLT 5X20
SCREW 4X6
FLANGE NUT 6MM
GOVERNOR ARM
1
1
1
1
2
1
1
1
1
1
1
9
10@ 90605230000
11@ 92301050200A
12@ 93500040060H
15
17
19
9405006000
16550Z0DV01
16500Z4ES30
CONTROL ASSY...............................................1................INCLUDES ITEMS W/ @
NUT M5
20@ 9400105000
2
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — LABELS ASSY.
PAGE 64 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX100UKRBF ENGINE — LABELS ASSY.
LABELS ASSY.
NO.
2
4
6
14
PART NO.
PART NAME
LABEL, TRADE MARK
MARK, CHOKE
MARK, TYPE (KRBF)
WRENCH, SPARK PLUG
QTY.
REMARKS
87521Z0DV01
87528Z0D000
87601Z4ES30
89216130690
1
1
1
1
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS OF SALE — PARTS
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
LIMITATIONS OF SELLER’S LIABILITY
MINIMUM ORDER
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
PAGE 66 — MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
MTX70 — OPERATION AND PARTS MANUAL — REV. #12 (02/22/12) — PAGE 67
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Service Department
Warranty Department
800-421-1244
310-537-3700
Fax: 310-537-4259
800-421-1244
310-537-3700
Fax: 310-943-2249
Technical Assistance
800-478-1244
Fax: 310-943-2238
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: pmastretta@cipsa.com.mx
Tel: (52) 222-225-9900
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: (52) 222-285-0420 Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
Fax: 0161 339 3226
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: jmartin@multiquip.com
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2012, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|