Issued January 2008 • Index No. ED/4.33
Engine-Driven Welder/
AC Generator
™
Bobcat 3 Phase
Applications
Processes
Generator Power Output Rated at 104 F
˚
3-Phase: 11,000 Watts Peak, 10,000 Watts Continuous
1-Phase: 10,500 Watts Peak, 9,500 Watts Continuous
Generator Power for:
Stick (SMAW)
Farm or Home Backup
Flux Cored (FCAW)
Pivot Irrigation Systems MIG (GMAW)
Output Range
Pumps
Conveyors
DC TIG (GTAW)
For Stick/TIG: 50 – 225 Amps For FCAW/MIG (CV): 19–28 Volts
Quick
Specs
Non-Critical AC TIG (GTAW)
Air Carbon Arc (CAC-A) Cutting
and Gouging (3/16 in carbons)
Air Plasma Cutting and Gouging
with optional Spectrum models
Weight 540 lb (245 kg)
Welding:
Farm Equipment Repair
General Maintenance
Fabrication
Accu-Rated™–Not Inflated
Generator Power
®
The Power of Blue.
Reliable Bobcat engine-driven
welding generators are the
Front Panel Fuel Gauge!
LP Option!
Fully Enclosed Case!
industry standard for quality and
value. Multiprocess weld output,
strong generator power, and most
important — rated #1 in reliability,
make the Bobcat the welding
industry’s most popular choice.
More horsepower — 23 HP gas/
®
25 HP LP Kohler provides more
power for demanding weld and
generator loads.
Accu-Rated™ 11,000 watts (peak),
480 V, 3-phase power for running
pivot irrigation systems, or
emergency backup power for
milking pumps and other motors.
Heavy-duty construction! Engine,
generator barrel, electrical switches
and other components are protected
against accidental impact.
Accu-Rated™ 10,500 watts (peak),
120/240 V, 1-phase output provides
plenty of power to run power tools,
lights or emergency backup power
for your barn or home.
Exclusive! High-Impact Protective
Armor
• Protective armor with receptacle
and output stud covers provides
a virtually indestructible barrier
from damage
• High-impact resistance in all
temperatures
Other applications include:
automotive bumpers, tractor hoods
and panels, lawn mower decks,
large structural parts, etc.
Patented 12-gallon “smart” fuel tank has a
reservoir design that minimizes the chance of
fuel backflow. Large capacity means more
running time before refueling. Fuel sight
gauges are on both sides.
Output stud and receptacle covers required by OSHA
and CSA for job site safety.
Ten-degree skewed-rotor design boasts better generator
performance. See page 3 for more information.
Fastex™ tool-free oil drain
system combined with hour
meter makes service a snap.
Total Parts Coverage Welder/generator and engine are
warranted for 3 years, parts and labor. Engine is warranted
separately by the engine manufacturer.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International Headquarters Web Site
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Download from Www.Somanuals.com. All Manuals Search And Download.
The Bobcat Generator Power Advantage
TYPICAL EQUIPMENT POWER USAGE
™
Bobcat 3 Phase will easily start and run the following equipment:
Accu-Rated – Not Inflated Generator Power
Miller’s Accu-Rated™ 11,000 watts of usable peak power is delivered for a
minimum of 30 seconds. Accu-Rated means peak power is usable for
maximum generator loads such as plasma cutting, Millermatics and motor
starting. Accu-Rated peak power beats the competition’s very short-duration
peak or surge power. Use your peak power, it’s more than a number.
Equipment
Pivot Irrigation (9–1 HP), 9 Tower
Pivot Irrigation (6-3/4 HP, 3–1-3/4 HP, 1–1 HP),
8 Tower with Corner Arm
Starting Watts Running Watts
Barn Cleaner (5 HP)
Silo Unloader (5 HP)
Portable Conveyor (1/2 HP)
Milker (5 HP)
11,600
12,200
3400
10,500
600
3000
4300
1000
2800
600
Bobcat
Hand Drill (1/2 inch)
Circular Saw (8-1/4 inch)
Air Compressor (1-1/2 HP)
Flood Lights (Vapor)
Refrigerator/Freezer
1400
8200
1250
2200
1300
1400
2200
1000
700
Competitor
Smooth Power – Not Spike Power
Revolutionary ten-degree skewed-rotor design
optimizes generator performance for smoother
power—not spiked power found with other
Sump Pump
800
®
Millermatic 212 MIG Welder 6500
6500
brands. Better power —better performance.
Waveform Comparison
(30–210, 230 V)
®
Spectrum 625
6900
6900
FUEL CONSUMPTION
(30 A, 230 V, 1/2 in cut)
(Kohler 23 HP Command OHV)
To select a generator that has enough power output in watts, add the watts
for the items you want to simultaneously run. Tools and appliances with
induction motors may require 3–7 times the listed wattage when starting.
All data listed is approximate—check your tool/appliance for specific
wattage requirements.
2.00
1-Phase
Generator
Power
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
DC WELD/
3-Phase
Generator
Power
3750 RPM
Tools and motors are designed to operate within 10% of
120/240/480 VAC. The Bobcat’s power generator provides strong
power while keeping the voltage within 10% of 120/240/480 VAC.
This increases tool/motor performance and life.
IDLE 2200 RPM
0
25
50
75 100 125 150 175 200 225 250
WELD AMPS AT 100% DUTY CYCLE
0
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
POWER KVA AT 100% DUTY CYCLE
Fuel Consumption Data
• 12-gallon fuel capacity.
• On a typical job using 1/8-in 7018 electrodes (125 amps, 20% duty cycle)
expect about 20 hours of operation.
• Welding at 150 amps at 40% duty cycle uses approximately 3/4 gallon
per hour— about 16 hours of operation.
• Under a continuous load of 4000 watts of generator power, the Bobcat
would run for about 14 hours.
Mounting Specifications
A. 20 in (508 mm)
B. 16-1/2 in (419 mm)
C. 1-3/4 in (44 mm)
D. 6-1/16 in (154 mm)
E. 32-3/4 in (832 mm)
F. 45-3/8 in (1153 mm) (Gas)
G. 13/32 in (10 mm) diameter
Height: 33-1/2 in (851 mm)
(to top of exhaust)
Width: 20 in (508 mm)
Depth: 45-7/8 in (1164 mm)
G
4 Holes
B
A
C
D
E
F
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Genuine Miller Accessories
(For additional options and accessories, see Bobcat Lit. Index No. ED/4.4.)
Protective Covers
All-Purpose
Running Gear
#300 396 Gas/LP
Remote Oil Drain/
Filter Kits (Kohler)
#300 106 Field.
Rear Mounted (shown)
Oil can be drained from
rear of machine.
Heavy-duty, water-resistant and mildew-
resistant covers protect and maintain the
finish of the welder.
#195 333
Includes two heavy-duty
15 in tires with inner
tubes, two 8 in rubber
For Gas models
#300 236 Field. Front/Chassis Truck Mounted
Oil can be drained from the front of the
machine or below the truck, mounted on
the chassis.
Makes servicing easy when engine drive is
mounted in tight spots.
swivel casters and a heavy-duty handle.
Recommended for all surfaces and
applications, and is easy to move around
the job site.
without Protective
Cage or Running
Gear.
#195 529
For Gas models
with Protective
Cage and/or
All-Terrain Running
Gear #300 457
Two heavy-duty 15 in
and two 10 in pneumatic
tires with inner tubes
and a rugged handle
#195 333 shown
Order the following from Miller Service Parts.
Running Gear.
Full KVA Plug Kit
#119 172 Field
120/240 VAC, 50 amp plug
(NEMA 14-50P) to fit full
KVA receptacle.
Protective Cage
with Cable
Holders
#195 331
Rugged cage with
provide maximum maneuverability.
Note: Cannot be used with Gas Cylinder Mounting
Assembly or LP Tank Mounting Assembly.
Full KVA 3-Phase Plug #165 963 Field
480 VAC, 30 A plug (NEMA L16-30P)
to fit 3-phase receptacle.
LP Tank Mounting
Assembly
cable holders
protects your investment. Can be used with
running gear, Gas Cylinder Mounting
Assembly, LP Tank Mounting Assembly,
or with trailer.
#195 329 LP
Designed for use with
All-Purpose Running
Gear, Protective Cage,
or by itself. Includes
Engine Tune-Up Kits
#230 015 Field. Kohler CH23 (Gas)
#180 096 Field. Kohler CH20 (LP)
and CH730 (LP)
Tune-up kits include spark plugs
(gas/LP models) and engine filters.
bracket and clamp to mount 33 and 43 lb
tanks horizontally, and hose with fittings to
converter.
Note: Cannot be used with Gas Cylinder
Mounting Assembly.
TIG Adapter with Extension #195 350 Field
Extension with Power Cable Adapter
45V11. Required for Scratch Start TIG
welding with Bobcats.
Ordering Information
Power Source
Stock No.
Description
Qty.
Price
Bobcat™ 3 Phase
(23 HP gas, 25 HP LP Kohler)
#907 255
Base machine, CC/CV, AC/DC, 11,000 Watts
#907 255-01-1 With LP Gas
Accessories
Remote Oil Drain and Filter Kit
#300 106
#300 236
#119 172
#165 963
#230 015
#180 096
Field. 28-Inch Kit. Kohler engine only
Field. 52-Inch Kit. Kohler engine only
Field. (Order from Miller Service Parts)
Field. (Order from Miller Service Parts)
Full KVA Plug
Full KVA 3-PhasePlug
Engine Tune-Up Kits
Field. For Kohler CH23 (Gas). (Order from Miller Service Parts)
Field. For Kohler CH20 (LP) and CH730 (LP). (Order from Miller Service Parts)
TIG Adapter with Extension
Protective Cover
#195 350
#195 333
#195 529
Field. Required for Scratch Start TIG welding with Bobcats. (Order from Miller Service Parts)
Gas models. Blue w/logo. Not for use with protective cage or running gear
Gas models. Blue w/logo. For use with protective cage and/or running gear
Protective Cage with Cable Holders #195 331
All-Purpose Running Gear
All-Terrain Running Gear
LP Tank Mounting Assembly
#300 396
#300 457
#195 329
LP models. Cannot be used with Gas Cylinder Mounting Assembly
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|