Issued April 2008 • Index No. DC/15
MIG Welding
Power Source
Delta-Fab System
Industrial Applications
Delta-Fab
Input Power 3-Phase, 230/460/575 V
Rated Output
24A Wire Feeder
Heavy-to-Light Fabrication
Input Power 24 VAC / 7A
Electrode Wire Diameter Capacity
Processes
Quick
375 A at 100% Duty Cycle
450 A at 60% Duty Cycle
.023–3/32 in (0.08 – 2.4 mm)
MIG (GMAW)
with mild steel, flux cored,
stainless steel, and
aluminum wires
Wire Speed 75 – 750 IPM (1.9–16.5 m/min)
Remote Voltage Control Standard
Weight 40 lb (18 kg)
Specs
Voltage 10 – 45 V
Weight 374 lb (170 kg)
®
The Power of Blue.
NEW! MIG Power Source Solutions
Run-in standard on 24A for better
arc-starting performance on a variety
of wires.
See option and package
descriptions on page 3.
Material specific output studs
provide the flexibility to produce the
optimal arc characteristics for
aluminum, stainless steel and all
other materials.
Four-Drive-Roll feeding system with
independent tension control handles
small and large diameter wires. (Drive
rolls and guides ordered separately.)
Line voltage compensation keeps
welding parameters constant even
when input voltages change 10%.
Eliminates need to change welding
parameters throughout the day.
Large analog volt and ammeters for
easy viewing.
14-pin receptacle provides quick,
direct connection to wire feeders and
accessories.
™
Auto Remote Sense automatically
Remote voltage control is standard.
Parameter adjustments can be made
in weld cell or at a remote location.
selects remote control requirements
through the 14-pin receptacle.
Eliminates switches and confusion
for the operator.
Solid-state weld contactor provides
longevity to match the ultra-durable
and reliable reputation of the Delta-Fab.
14-pin select is easy to set up with
no external switches to put in the
wrong position.
Thermal overload protection
automatically shuts down the system
to prevent high repair costs.
Large output voltage range provides
more flexibility on a variety of wire
diameters. Also aids operator with
voltage losses that occur when operating
long distances from power source.
115 VAC duplex receptacle provides
15 amps of auxiliary power.
Delta-Fab™ System
MIGRunner® Package shown
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International Headquarters Web Site
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Download from Www.Somanuals.com. All Manuals Search And Download.
Genuine Miller Options
Digital Meter #186 498 Field
Preflow/Postflow and Spot Control
#186 496 Field
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
meters per minute or inches per minute.
The voltage function will only monitor and
display the arc voltage. The voltage display
can also be calibrated if required.
Installs inside feeder under an easy access
hinged cover. Provides up to 5 seconds of
spot weld time and has adjustable timers
(0.25 to 5 sec.) for controlling gas flow
prior to arc initiation and after completion
of weld.
Packages
NEW! MIG Power Source Solutions
™
Option #1: Delta-Fab System
Purchase running gear and MIG kit
separately.
Delta-Fab™ System
Comes complete With:
Delta-Fab™ power source
24A wire feeder
Bernard® Q-Gun™
#951 022 (230/460/575 V, 60 Hz)
™
Option #2: Delta-Fab System Stationary Package
Stationary display without running
gear/cylinder rack.
Delta-Fab™ System Stationary Package
Comes complete With:
Delta-Fab™ power source
24A wire feeder
Bernard® Q-Gun™
#951 083 (230/460/575 V, 60 Hz)
Industrial MIG 4/0 Kit:
Smith® regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
™
®
Option #3: Delta-Fab System MIGRunner Package
MIGRunner system with factory-installed
running gear/cylinder rack.
Delta-Fab™ System MIGRunner Package
Comes complete With:
Delta-Fab™ power source
24A wire feeder
Bernard® Q-Gun™
Industrial MIG 4/0 Kit:
#951 111 (230/460/575 V, 60 Hz)
Smith® regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
Factory installed running gear/cylinder
rack
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Genuine Miller Accessories
Hanging Bail
Spool Cover
Wire Reel
Assembly
Turntable
Assembly
NEW! Industrial MIG 4/0 Kit #300 390
Consists of Smith® regulator/flowmeter
with 10 ft (3 m) gas hose, 10 ft (3 m)
4/0 feeder weld cable with lugs, and 15 ft
(4.6 m) work cable with 600-amp C-clamp.
Turntable Assembly #146 236
Spool Cover #057 607
For 12 in (304 mm) spool.
Allows rotation of the feeder as the operator
changes work positions. Reduces strain
and bending on the gun cable.
Hanging Bail #058 435
Suspends feeder over the work area.
Wire Reel Assembly #108 008
For 60 lb (27 kg) coil of wire.
(Cannot use when handle is installed.)
Reel Cover #058 256
For 60 lb (27.2 kg) coil.
Standard Running
Gear #042 886
The large 10 in
(254 mm) rear
wheels and 5 in
(127 mm) front
Spool Adapter #047 141
For use with 14 lb (6.4 kg) spool
of Lincoln self-shielding wire.
Carrying Handle
Extension Cords
casters on this
Feeder Cart
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
Used to extend interconnecting cords.
running gear provide excellent mobility on
the shop floor, making it easier to move the
power source. Very easy to install. Handles
double as weld cable holder.
Feeder Cart #043 698 Field
A low-profile creeper cart with high-quality
rubber casters, front swivel and rear rigid.
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Carrying Handle #193 762
For lifting and moving feeder.
Ordering Information
Equipment and Options
Stock No.
Description
Qty.
Price
Delta-Fab System Power Source, Feeder & Gun Only
Delta-Fab System Stationary Package
Delta-Fab System MIGRunner Package
Digital Meter
#951 022
#951 083
#951 111
#186 498
#186 496
230/460/575 V, 60 Hz
230/460/575 V, 60 Hz
230/460/575 V, 60 Hz
Field
Preflow/Postflow and Spot Control
Field
Accessories
Industrial MIG 4/0 Kit
#300 390
Includes Smith regulator/flowmeter with 10 ft (3 m) gas hose,
10 ft (3 m) 4/0 feeder weld cable with lugs, and 15 ft (4.6 m) work cable
with 600-amp C-clamp
Standard Running Gear
Standard Cylinder Rack
Wire Reel Assembly
Feeder Cart
Carrying Handle
Turntable Assembly
Hanging Bail
Spool Cover
Reel Cover
Spool Adapter
#042 886
#042 887
#108 008
#043 698
#193 762
#146 236
#058 435
#057 607
#058 256
#047 141
For 60 lb (27.2 kg) coil
Field
For 12 in ( 304 mm) spool
For 60 lb (27.2 kg) coil
For 14 lb (6.4 kg) Lincoln spool
Extension Cords
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|