Operating instructions
for Washing machine
W 3652 WPS
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the
first time.
G
M.-Nr. 06 618 280
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of your old appliance or machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Reminder to remove transport struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Calibrating the load sensor to zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Choosing the correct extra option (Soak, Pre-wash, Short) . . . . . . . . . . . . . . . 13
When drying with a tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Soak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To omit the final spin (Rinse hold). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To omit rinse and interim spin and the final spin (Without spin) . . . . . . . . . . . . 20
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Garment care label symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Altering a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 29
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Fabric conditioners or liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Colour run and dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Problems with the load size indicator or calibrating to zero . . . . . . . . . . . . . . . . . 38
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 41
Opening the drum door in the event of a blocked drain outlet and/
or power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changing the lamp for the drum lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 52
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Language F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Time Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Water plus T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Gentle action U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Suds cooling R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Lock X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Temperature S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Buzzer O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Keypad tone P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Display contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Standby Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Memory V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The electrical safety of this
To avoid the risk of accidents and
machine can only be guaranteed
when continuity is complete between
the machine and an effective earthing
system which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and regularly tested and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician.
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Correct usage
Do not connect the machine to the
mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
machine (e.g. danger of overheating).
Only use the washing machine to
wash items which are specified by
the manufacturer to be machine-wash-
able on the wash-care label, and tex-
tiles composed of hand-washable wool
or wool blend fabrics as well as satin,
lace, silk and other hand-washable
garments.
Any other applications may be danger-
ous. The manufacturer is not liable for
damage resulting from improper use or
operation.
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in
unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele approved
technician.
Technical safety
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
Before setting up the machine,
check it for any externally visible
damage. Do not install and use a
damaged machine.
The machine is only completely
isolated from the electricity supply
when:
Before connecting the machine,
ensure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The Miele "Water protection
system" protects from water
damage provided the following
conditions have been met:
Do not install your washing
machine in rooms where
temperatures below freezing may
occur. Frozen hoses may burst under
pressure. The reliability of the electronic
control unit may be impaired at
temperatures below freezing point.
– the machine is correctly plumbed in
and connected to the electricity
supply.
Before using the machine for the
first time, check that the transit
fitting at the rear of the machine has
been removed (see section on
"Installation"). During spinning, a transit
fitting which is still in place may result in
damage to both the machine and
adjacent furniture or appliances.
– if a fault has been identified, the
machine must be examined by a
competent person before further use,
and repaired if necessary.
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
Turn off the stopcock if the
machine is to be left for any length
of time (e.g. holiday), especially if there
is no floor drain (gully) in the immediate
vicinity.
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
Flooding danger
In countries where there are areas
If hooking the drain hose into a
which may be subject to infestation wash basin, check that the water can
by cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the machine guarantee.
drain off quickly enough to prevent the
sink from overflowing.
Make sure the drain hose is secure, so
that the force of the water flowing out of
the hose does not dislodge it.
Take care to ensure that foreign
objects (e.g. nails, pins, coins,
paper clips) do not find their way into
the machine with the laundry. These
may damage components of the
machine (e.g. suds container, drum),
which in turn can result in damage to
the laundry.
Use
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
If the correct amount of detergent
is dispensed, the machine should
not need to be descaled. If, however,
you do wish to descale the machine
only use proprietary non-corrosive
descaling agents and strictly observe
the instructions on the packaging. If in
doubt, contact the Miele Customer Ser-
vice Dept. or your Miele Dealer.
Safety with children
This machine is not a toy! To avoid
the risk of injury do not allow
children to play on or near it or to play
with the controls. Supervise its use by
the elderly or infirm, and supervise
children whilst you are operating the
machine.
For machines with a ‘porthole’
door, remember that the porthole
glass will be hot when washing at very
high temperatures. Do not let children
touch it.
Textiles which have been
pre-treated in solvent based
cleaning agents must be thoroughly
rinsed in clean water before being
washed in the machine.
Never use solvent based cleaning
agents in this machine, as this may
result in damage to component parts
and create toxic fumes. Such
detergents also pose a fire and
explosion hazard.
Accessories
Accessory parts may only be fitted
when expressly approved by Miele.
If other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Only use dyes specified by the
manufacturer as being suitable for
use in a domestic washing machine.
Always observe the manufacturer's
instructions carefully.
Disposal of your old machine
Before discarding an old machine,
switch it off at the wall socket and
unplug it. Render the plug useless. Cut
off the cable directly behind the
appliance to prevent misuse. This
should be done by a competent
person.
Colour run and dye removers
contain sulphur compounds which
can cause damage such as corrosion.
Do not use these products in this
machine.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Always make sure the drum is
stationary before reaching in to
remove washing. Reaching into a
moving drum is extremely dangerous.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
Control panel
aProgramme buttons with indicator
lights
fStart/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
For selecting a washing programme.
bExtra option buttons with indicator
lights
gI-On/0-Off button
For switching the washing machine
on or off.
Various Extra options can be added
to the washing programmes.
cPC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
hDoor button
Opens the machine door.
dm button
For selecting delay start and
setting the time of day.
eDisplay with – , OK, + and
Load/Detergent buttons
See the following page for more
details.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
Display
Selecting programmes via the
display
By pressing the Further programmes
button, you can select one of the
following programmes:
– Sportswear
– Outerwear
– Proofing
– Curtains
– Pillows
– Drain/spin
– Separate rinse
– Starch
– / + buttons
For changing the values shown in the
display:
– decreases the value or moves the
Selecting settings
highlighting up a line.
The following are selected via the
display:
+ increases the value or moves the
highlighting down a line.
– Temperature
– Spin speed
OK button
For confirming the value selected and
choosing the next value.
– the Soak time setting
– Delay start
Load, Detergent button
For calling up the load size and the
detergent amount and for calibrating
load size sensor to zero.
Other displays
– the duration of the wash programme
– the current time of day
The Settings J menu is also operated
via the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Setting the language
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
^ Use the – and + buttons to select the
language you want and confirm your
selection by pressing the OK button.
Setting the time of day
The display for setting the time will
appear.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry and
without detergent.
12:00
Set the time
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
After you have confirmed the minute
setting, the display will change to
show the reminder to remove the
transport struts.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
The welcome screen will not appear
again once a programme lasting
longer than 1 hour has been
completed.
After a few seconds the display will
change to show the screen for
selecting your language.
^ After removing the transport struts (if
this has not already been done by
your fitter) press the OK button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Running your first programme
Calibrating the load sensor to zero
^ Switch the washing machine on.
^ Open the drum door.
Your machine is now ready for the first
programme to be run.
15:00
^ Press the programme button for
Cottons.
Select programme
^ Press and hold the Load/Detergent
button pressed in until the following
message appears in the display:
^ Press the programme button for
Cottons.
^ Press the Start/Stop button.
Zero setting
i
OK
^ At the end of the programme switch
the machine off.
^ Switch the washing machine off.
The load sensor must then be
calibrated to zero as you would with
bathroom scales.
The machine is now ready for use.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
– Reduce the amount of detergent for
smaller loads. Use the Load/
Detergent button.
– Use the Automatic and Express
programmes for small loads.
Choosing the correct extra option
(Soak, Pre-wash, Short)
– When smaller amounts of laundry are
washed using the Cottons
Select:
programmes, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
– Instead of using the Cottons 95°C
programme, use the Cottons 60°C
programme. This will give an energy
saving of between 35% and 45%.
This is sufficient for most levels of
soiling. For stubborn or old stains,
use the Soak extra option.
– A wash programme together with the
Soak extra option for heavily soiled
laundry.
– The Pre-wash extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
– Use the Soak extra option instead of
Pre-wash. If Soak is followed immedi-
ately by a main wash, the same suds
are used.
When drying with a tumble dryer
– Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
ASort the laundry
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
^ Empty all pockets.
– Close any zips, fasten hooks and
eyes etc before washing.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
components in the machine.
^ Badly soiled areas, stains etc. should
be cleaned as soon as possible,
Do not wash any items in this machine
which are specified by the
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
manufacturer as not washable on the
care label. (h symbol)
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
,Do not use solvent-based
cleaning agents in this machine.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
The interior drum lighting will come on.
CSelect a programme
The display will switch to show the
menu for the programme selected.
60°C
1600 rpm
Duration:
1:49 h
^ You can then alter the temperature
which is shown highlighted with the –
or + buttons. Press the OK button to
confirm the temperature you want
and move on to the spin speed.
Rinse hold and Without spin are also
selected via this menu option.
When you press the Further
programmes button, a list of these
programmes will appear in the display.
^ The programmes are selected with
the Programme selection buttons.
E
Sportswear
Outerwear
Proofing
Pressing a button which is allocated
with two programmes, a second time
will select the lower programme. The
relevant indicator light will come on to
show which programme has been
selected.
H
^ Use the – or + button to highlight the
programme you wish to select and
confirm your selection by pressing
the OK button.
The programme selected will appear in
the display.
Sportswear
40°C
1200 rpm
Cottons
Duration:
1:07 h
^ You can then alter the temperature
which is shown highlighted with the –
or + buttons. Press the OK button to
confirm the temperature you want
and move on to the spin speed which
you can also alter if you wish.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
The display shows the amount of
laundry loaded in the drum as a % (in
25% steps) of the maximum load
permissible for the programme
selected.
^ Unfold the laundry and load loosely
in the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this causes creases and reduces
cleaning efficiency.
^ You can select any extras options
with the extra option buttons.
^ Each press of the top button selects
the extra option in the following order:
Pre-wash or Soak or Pre-wash and
Soak or no selection.
Make sure that no garments are
caught between the drum door and
seal.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the basic
programme being used.
DLoad the drum
^ Press the Door button to open the
drum door.
The load size indicator display will
appear.
Load <25%
^ Shut the door with a gentle swing.
B
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
EAdd detergent
– High water consumption (an
additional rinse cycle will
automatically switch in).
The load size indicator display will be
replaced with the detergent percentage
display.
– A burden to the environment.
Detergent 75%
A
40%
Add slightly less than half the
amount recommended . . .
50%
Add half the amount
recommended . . .
60%
Add slightly more than half the
amount recommended . . .
75%
Add three quarters of the
amount recommended . . .
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
100%
Add the full amount
You also need to take the level of
soiling and water hardness into
account.
i
Detergent for the pre-wash (1/4 of the
total amount recommended).
This compartment is also used for
starch formulations when starching
separately.
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
j
– Greasy particles clinging to the
laundry.
Detergent for the main wash
including Soak
– Limescale deposits on the heater
elements.
§
Fabric conditioner or liquid starch
^ Close the detergent drawer.
See "Detergent" for further information.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FStart the programme
Only remove laundry from the
machine once the drum has
stopped turning. Reaching into a
moving drum is extremely
^ Press the flashing Start/Stop button.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the machine measures
how much water is being absorbed by
the laundry. The programme duration
may be longer or shorter depending on
this absorbency rate.
dangerous and could result in injury.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
The drum lighting switches off once the
programme has started.
GRemove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
Anti-crease
and
Important
Always remove the laundry before
switching the machine off. This is
important to ensure that the load size
indicator works correctly.
Programme finished.
i
Unload the drum, then
switch the machine off.
^ Switch the washing machine off with
I-On/0-Off button.
^ Press the Door button to open the
drum door.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^ Remove the laundry.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras
You can use the extra option buttons to Short
augment the basic wash programmes.
For light to normal soiling with no
visible staining.
Pre-wash
For laundry with large amounts of dirt
e.g. dust, sand.
The duration of the main wash is
reduced.
Soak
Water plus
The machine is set at the factory so that
the water level in the main wash and
rinses will be increased if the Water
plus extra option is selected.
For heavily soiled and stained items
with protein stains (e.g. blood, fats
and oils, cocoa).
A length of time of between 30 minutes
and 6 hours can be chosen, in 30
minute periods for the "Soak" process.
However, you can select other settings
for Water plus. These are described in
"Settings menu J".
To select the soak time
Buzzer
^ Press the Pre-wash, Soak button
repeatedly until the Soak indicator
light comes on.
An audible tone sounds repeatedly at
the end of a programme or when Rinse
hold is reached.
You can now use the display to select
the soak time you require.
The buzzer will sound repeatedly until
the machine is switched off.
15:06
Once switched on, the buzzer is active
in all programmes until it is switched off
again.
Finish at:
17:04
Soak duration:
0.30 h
You can switch the buzzer off by
pressing the buzzer button. You can
also change the volume of the buzzer.
See "Settings menu J - Buzzer".
Use the – and + buttons to enter the
soak time. The display will also show
the corresponding finishing time for the
washing programme. Press the OK
button to confirm the soak time you
want.
The buzzer will always sound when
there is a fault, even if it has been
switched off.
To delete the soak time
^ Press the Pre-wash, Soak button
repeatedly until the Soak indicator
light goes out.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
To omit the final spin (Rinse hold)
Programme
Cottons
rpm
1600
1200
600
^ Select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
Minimum iron
Delicates
Automatic
Express wash
Woollens
1200
1600
1200
400
– To start the final spin:
Silks
Dark garments
Denim
1200
900
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
Shirts
600
Sportswear
Outerwear
Curtains
1200
800
600
– To end the programme:
Pillows
1200
1000
1600
1200
1500
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
Proofing
Drain/Spin
Separate rinse
Starch
To omit rinse and interim spin and
the final spin (Without spin)
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional
rinse is introduced if this setting is
selected with the Cottons, Minimum
Iron, Express wash and Automatic
programmes.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To begin delay start
^ Press the Start/Stop button.
60°C
1600 rpm
Start in:
3:41 h
The display will show how long in h:min
you have to wait until the programme
starts.
The current time of day needs to
have been set for delay start to work
correctly.
To alter delay start
To select delay start
^ Press the m button.
^ Select the programme you want and
then press the m button.
^ Use the + and – buttons to alter the
time you want the programme to end
at.
9:51
Start at:
Finish at:
9:51
11:19
^ Press the OK button to confirm.
To cancel delay start
The display shows the current time of
day and the time the programme is due
to end.
^ Press the Start/Stop button.
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, turn out to be a bit
later or earlier than first indicated.
^ Use the + button to select the time
you want the programme to end at.
9:51
Start at:
Finish at:
13:32
15:00
The first press on the button will adjust
the programme end time to the next full
or half hour. Each subsequent press on
the button will delay the programme
end time by 30 minutes.
N.B.: If, under the settings menu, you
have chosen not to have the time
displayed the display will show how
long in h:min there is left until the
programme starts / stops instead of
the actual time that it will start / stop
at.
Use the – button to shorten the time if
you have chosen too long a time.
^ Confirm the programme end time by
pressing the OK button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons 30°C to 95°C 9876
Max. load 6.0 kg
Max. load 3.0 kg
Fabric
Extras
Cottons, linens or cotton mix fabrics.
Pre-wash or Soak, Short, Water plus
Note for test institutes:
Short programme: 3.0 kg load and Short extra
Minimum iron 30°C to 60°C 421876
Fabric
Synthetics, mixed fibres and easy care cottons. If fabrics have a
high proportion of man-made fibres it is advisable to programme the
machine for "Gentle action". See "Settings menu J.
Note
Reduce the spin speed for fabrics which crease easily.
Pre-wash or Soak, Short, Water plus
Extras
Delicates cold to 60°C 421
Max. load 2.0 kg
Fabric
For delicate garments made of synthetic fibres, mixed fibres, rayon
and easy care cottons.
Extras
Pre-wash or Soak, Short
Automatic cold to 40°C 7621
Max. load 3.5 kg
Fabric
Small loads of garments made from man-made fibres and cotton
garments which can be washed together. Sort according to colour.
Extras
Pre-wash or Soak, Short, Water plus
Express wash cold to 40°C 76
Max. load 3.0 kg
Fabric
Small loads of items which require freshening up and which can be
washed in a Cottons programme.
Extras
Water plus
Woollens cold to 40°C /ac
Max. load 2.0 kg
Fabric
Machine-washable or hand-washable wool or wool blend fabrics. If
the care label does not specify a temperature, wash using the cold
setting.
Silks cold to 30°C /c
Max. load 1.0 kg
Fabric
Silks and other handwashable fabrics with no wool content, e.g.
satin, lace and silk.
Note
Place socks, tights, bras etc. in a washing bag.
Water plus
Extras
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Dark garments cold to 40°C
Max. load 3.0 kg
Garment
Note
Black and dark garments made from cotton or mixed fibres.
Wash inside out.
Short
Extras
Denim cold to 60°C
Max. load 3.0 kg
Notes
– Wash denim inside out.
– Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.
Extras
Pre-wash or Soak, Short
Shirts cold to 60°C
Max. load 2.0 kg
Notes
– Pre-treat collars and cuffs if necessary.
– Wash silk garments in the Silks programme.
Extras
Short, Water plus
Sportswear 30°C to 60°C
Max. load 2.0 kg
Max. load 2.0 kg
Garment
Lightly soiled sports garments which require washing or
freshening up.
Extras
Pre-wash or Soak, Short, Water plus
Outerwear cold to 40°C
Garment
Outerwear made from micro-fibres such as Gore-Tex®,
SYMPATEX®, WINDSTOPPER® etc.
Notes
– Zip up jackets before washing.
– Use a specialist detergent. Do not use fabric conditioner.
Extras
Pre-wash or Soak, Short, Water plus
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Curtains
Max. load 2.0 kg
Item
Curtains, including net curtains, specified as machine-washable
by the manufacturer. A pre-rinse without detergent is carried out
automatically to remove dust.
Note
Extra
For curtains which crease easily, reduce the spin speed or select
Without spin.
Water plus
Pillows 40°C to 60°C
2 pillows (40 x 80 cm) or
1 pillow (80 x 80 cm)
Item
Washable pillows with feather, down or synthetic fillings.
Please observe the instructions on the wash care label.
Water plus
Note
Extra
Proofing 40°C
Item
Max. load 2.0 kg
For treating microfibre fabrics, skiwear, fine, closeweave cotton
garments (poplin) or tablecloths to provide a water and dirt
resistant finish.
Notes
– The items should be freshly washed and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Drain/spin
Max. load 6.0 kg
Note
Make sure you select the appropriate spin speed.
Drain only: Select Without spin. Do not use for woollens.
Separate rinse
Extra
Max. load 6.0 kg
Rinse hold
Starch
Max. load 6.0 kg
Note
The laundry (table cloths, napkins, overalls) should be washed
but not treated with fabric conditioner.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
Wash
rhythm
Water Rinses
level
Interim
Final spin
level
d
d
e
(
d
(
e
(
(
(
d
(
(
(
–
spin
L
L
–
Cottons
a
a
b
a
a
c
d
a
a
a
a
b
a
a
–
(
(
e
(
(
(
e
(
(
(
(
e
(
(
(
–
2-43)
2-34)
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Minimum iron
Delicates
Automatic
Express
3
2-34)
2-34)
L
L
L
–
Woollens
Silks
2
2
Dark garments
Denim
3
L
–
3
Shirts
2
–
Sportswear
Outerwear
Curtains1)
Pillows2)
2
L
L5)
–
3
3
3
–
Proofing
1
–
Drain/Spin
Separate rinse
Starch
–
–
–
–
–
–
e
(
2
–
–
–
1
–
d = Low water level
( = Medium water level
e = High water level
a= Normal wash rhythm
b= Gentle action
c= Woollens
d= Silks
See the following pages for more information about the programme sequences.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
This machine has fully electronic
controls with automatic load
Special features in the programme
sequences:
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
Anti-crease:
At the end of every programme, with
the exception of the Woollens
programme, the drum continues to turn
at intervals for up to 30 minutes to help
prevent creasing. The door can be
opened and laundry removed at any
time during the anti-crease phase.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
1)
Pre-rinse: A pre-rinse without
detergent is carried out automatically
to remove dust.
The programme sequence display
shows the stage the programme has
reached.
2)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate the pillows.
Subsequent water intake for the main
wash is through compartment j.
3)
A second rinse is carried out when
when a temperature of 60°C to 95°C
has been selected. A third rinse is
carried out when a temperature
below 60°C is selected.
A third/fourth rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– Without spin has been selected
4)
A third rinse is carried out if:
Without spin has been selected
5)
In the Outerwear programme,
laundry is only spun after the main
wash.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Washing
Ironing
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicate the
level of agitation permitted.
The number of dots indicates the
ironing temperature
I
H
G
Hot iron (max sole plate temp.
approx. 200°C)
Medium hot iron (max sole
plate temp. approx. 150°C)
9
4
c
/
No bar under the symbol:
= normal agitation
Cool iron (max sole plate
temp. approx. 110°C). Do not
steam iron garments carrying
this symbol.
One bar under the symbol:
= reduced agitation
Two bars under the symbol:
= much reduced agitation
J
Do not iron
Hand wash (if no temperature
is specified use the lowest
temperature or cold)
Professional cleaning
f
p
Dry clean only. The letters
indicate the type of cleaning
agent required.
h
Do not wash
w
Professional Wet Clean only
Do not dry clean
Drying
The number of dots indicates the
drying temperature
D
q
r
s
Normal temperature
Low temperature
Do not tumble dry
Bleaching
x
{
Any oxidising bleaching
agent can be used
Only use an oxygen based
bleach or a non-chlorine
bleach
z
Do not bleach
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Altering a programme
You can cancel a programme at any
time after it has started.
Altering the programme or the
temperature
^ Press the Start/Stop button briefly.
After the start of a programme it is no
longer possible to select a different
programme.
The suds will be pumped away and the
programme is cancelled.
If you want to remove the laundry:
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
^ Press the Door button.
If you want to select a different
programme:
If you want to select another
programme or alter the temperature
(more than five minutes after the start of
a programme) you will need to cancel
the programme and begin again.
^ Switch the washing machine off with
I-On/0-Off button.
^ Switch the machine back on again.
Altering the spin speed
Interrupting a programme
^ Press the OK button.
^ Switch the washing machine off with
The spin speed will be shown
highlighted. You can use the – and +
buttons to change the spin speed up
until the final spin begins. Rinse hold
and Without spin are also selected
via this menu option.
I-On/0-Off button.
To continue with the same programme:
^ Switch the machine back on with the
I-On/0-Off button.
Changing extra options
The buzzer can be switched on or off.
It is possible to select or deselect the
Short and Water plus extra options up
to five minutes after the programme has
started.
Please note that no changes are
possible if the safety lock has been
activated.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry
Safety lock
after a programme has started
The safety lock prevents the machine
from being opened or the
programme cancelled or the
^ Press the Door button to open the
drum door.
temperature or spin speed being
altered during a wash programme.
^ Add or remove items.
^ Close the drum door.
To activate the safety lock
The programme will continue
automatically.
^ Once the programme has started,
press the Start button for at least 6
seconds until the following appears
in the display:
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
X Locked
The machine will now not accept any
changes and the programme will
proceed through to the end.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The safety lock is deactivated
automatically at the end of the
programme.
To deactivate the safety lock
The door cannot be opened, if:
^ Press the Start/Stop button for at
least 6 seconds until the following
appears in the display:
– the suds temperature is above 55°C.
– the water is above a certain level.
W Unlocked
– the programme has reached the
Final spin stage.
– the safety lock has been activated.
If you press the Door button when the
above conditions are present, the
following will appear in the display:
X Locked
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
All modern detergents produced for automatic washing machines are suitable.
Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets
are suitable for full loads but note that it may be impractical to reduce tablets for
smaller loads. Some tablets do not dissolve as rapidly as others and may not be
suitable for programmes with short durations.
Do not use biological detergents on silk as the enzymes may damage the silk!
Instructions for use and recommended amounts for a full load are given on the
detergent packaging.
Liquid detergent should be dispensed using a ball provided by the manufacturer
for programmes without a pre-wash.
For programmes with a pre-wash you will need to purchase a special container
from the Miele Spare Parts department which sits in the main wash compartment
j of the detergent dispenser drawer. Add liquid detergent to this container for
the main wash and to compartment i for the pre-wash.
All purpose detergent
for whites*
Detergent for coloured
fabrics*
Detergent for delicates
Cottons
X
X
X
X
Minimum iron
Delicates
Automatic
Express
X
X
X
X
X
Woollens
Silks
Liquid detergent for machine-washable woollens
Liquid detergent for machine-washable silk and woollens
1)
Dark garments
Denim
X
1)
X
Shirts
X
X
X
X
Sportswear
Outerwear
X
2)
2)
Curtains
Pillows
X
X
X
X
1)
1)
Proofing
Only use proofing agents which are stated by the manufacturer as being "suitable
for use on membrane textiles" as these consist of fluorochemical compounds. Do
not use proofing agents which contain paraffin. Add proofing agents to
compartment j. Add liquid proofing agents to compartment §.
Starch
Liquid starch, starch formulations, viscous liquid starch, starch
1) Only use liquid detergent
2) Only use powder detergent or detergent specifically designed for washing
curtains
* Powder detergent, tablet detergent, liquid detergent and liquid tab detergent.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The right amount to dispense will
depend on the following:
Water softener
A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.
– The quantity of the laundry
– The soiling level of the laundry
Lightly soiled
No visible dirt or stains. Possibly
slight body odour.
Use a quantity of detergent as for soft
water.
Normally soiled
Visibly dirty and/or just a few slight
stains.
Miele do not recommend connecting
the machine to a household water
softener.
Heavily soiled
Stains and soiling clearly visible.
– The water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Washing with several
components
If you wash using several components
(e.g. special application detergents),
we recommend always dispensing the
agents into compartment j in the
following order:
1. Detergent
2. Water softener
3. Stain remover
This way the agents are distributed
more evenly.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners or liquid
starch
conditioner channel regularly. See
"Cleaning the detergent dispenser
drawer". Do not add starch
formulations or viscous liquid starch
to the § compartment as it will clog
up.
Fabric conditioners make garments soft
to handle and help prevent static cling
when tumble drying.
Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.
Adding fabric conditioner separately
^ Add fabric conditioner to
compartment §.
^ Dispense according to the amount
specified on the packaging.
^ Press the Further programmes button
and select the Starch programme.
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
^ Press the Start/Stop button.
Adding starch separately
^ Prepare and measure the starch in
accordance with the manufacturer's
instructions on the packaging.
^ Add the starch to compartment i.
^ Press the Further programmes button
and select the Starch programme.
^ Press the Start/Stop button.
Colour run and dye removers /
dyes
^ Do not use colour run or dye
removers in this washing machine.
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.
It will be automatically dispensed in the
last rinse. At the end of the programme
a small amount of water remains in the
fabric conditioner compartment §.
If starching frequently, clean the
dispenser compartment and
especially the siphon tube and
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Extra cleaning
,Disconnect the machine from the
mains electricity supply and
withdraw the plug from the socket
prior to cleaning the machine.
Carry out a hot wash (70°C or above)
with powder detergent approx. every 6
weeks to help prevent deposits building
up in the machine. These can occur
when washing is mainly done at low
temperatures, and also lead to
unpleasant smells. If you have no
reason to wash occasionally at this high
temperature, then run a Cottons 95°C
programme with detergent but no
laundry at regular intervals.
^ Clean the casing with a mild
non-abrasive detergent or soap and
water. Wipe dry with a soft cloth.
^ Clean the fascia panel with a damp
cloth and wipe dry with a soft cloth.
^ The drum can be cleaned using a
suitable proprietary stainless-steel
cleaning agent following the
manufacturer's instructions on the
packaging.
,Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaning agents. These
might damage plastic surfaces and
other components because of the
chemicals they contain.<R>The
washing machine must not be hosed
down.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
<N>which is suitable for cleaning
surfaces such as stainless steel, glass,
plastic and chrome without the use of
chemicals. It can be washed 300 times.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the detergent dispenser
drawer
Remove detergent residues regularly.
^ Clean the siphon.
1. Remove the siphon from
compartment §. Wash under
running warm water. Clean the
siphon tube in the same way.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
2. Replace the siphon.
Over time, detergent residue can build
up in the water jets in the top of the
detergent drawer housing.
^ Clean the detergent drawer with
warm water.
^ Before replacing the detergent
drawer, use a bottle brush or similar
to clean them out.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the filter in the water
inlet
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
The washing machine has a filter to
protect the water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of the
plastic filter bar 2 and remove.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
What to do, if . . .
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
Check whether
The display remains
There is no power to
dark and the indicator the machine.
lights for the
programme buttons
are not lit up.
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
The display shows:
Machine locked. Enter
The electronic system Enter the code for the system
lock has been
activated.
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on. See "Settings
menu".
code
The display is dark.
The display has
switched off
Press a button. Stand-by
comes to an end.
automatically to save
energy (Stand-by
mode).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Fault messages in the display
Problem
Possible cause
Remedy A
Fault
q
– The water outlet is
blocked or
– Clean the drain filter and
the drain pump.
– The maximum drain
Check drainage
system
restricted.
– The drain hose has
height is 1 m.
been fixed too high.
Fault
p
– The water inlet is
blocked or
Check whether
– the stopcock is opened
Water intake
Open stopcock
restricted.
wide enough.
– the inlet hose is kinked.
Waterproof
activated
o
The water protection
system has reacted.
Call the Service
Department.
Close stopcock
Fault
ä
The drum lighting is
not locked in position. lighting is sitting correctly.
Check that the drum
Drum lighting
Technical fault
Call the Service
Department
,
There is a fault.
Start the programme again.
If the fault message
appears again, contact the
Service Department.
The following will flash in
the display:
Anti-crease
Excessive foam has
built up during
washing.
Use less detergent next
time and follow the
manufacturer's instructions
on dosage given on the
packaging.
alternately with
Check detergent
ATo switch off the fault message: Switch the washing machine off with I-On/0-Off
button.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with the load size indicator or calibrating to zero
Problem
Possible cause
Remedy
The display indicates There was already
a load of <25% or no laundry in the drum
load size is indicated when the washing
^ To recalibrate the sensor to the
zero setting:
– Remove the laundry from the
when the drum is
full.
machine was
drum.
switched off. This has
decalibrated the
sensor from the zero
setting.
– Switch off the washing
machine and leave the door
open.
– Switch on the washing
machine.
– Press the programme button
for Cottons.
– Press and hold the Load/
Detergent button pressed in
until the following message
appears in the display:
Zero setting
OK.
The display indicates The load size sensor Rotate the drum once. If the
a load greater than has been display still indicates a load
<25% when the drum decalibrated from the greater than <25%, recalibrate
is empty.
zero setting.
the sensor to zero again (see
above section).
The fault message:
Zero setting
The drum door is
closed.
– Open the drum door.
– Switch off the washing
machine and leave the door
open.
not possible
appears in the
display.
– Switch on the washing
machine.
– Try and recalibrate to zero
again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The machine feet are not Level the machine (see
level.
"Installation").
The pump makes
strange noises.
This is not a fault! These noises occur at the end of
a pump sequence as a normal part of the operation.
Large amounts of
The water pressure is too – Clean the filter in the
detergent residue remain low.
in the detergent
dispenser drawer.
water inlet.
– It may be useful to
select the Water plus
Extra.
Powder detergent used in In future, add washing
conjunction with water
softeners tends to
become sticky.
powder into the
dispenser drawer first,
and then add the water
softener.
Fabric conditioner is not The siphon tube is not
Clean the siphon, (see
completely dispensed or correctly positioned, or is “Cleaning and care" -
too much water remains clogged up.
in the § compartment.
"Cleaning the detergent
dispenser drawer”).
The display is in a
different language.
A different language has Set the language you
been selected in
want. The flag symbol
will guide you.
Settings J Language J.
The laundry has not
The spin speed selected Select a higher spin
been spun satisfactorily. was too low.
speed next time.
When laundry is dry it
feels hard to the touch.
Too vigorous a wash
action.
Programme in gentle
action and more water.
Not enough detergent
used.
Increase detergent dose
to prevent limescale
build up in laundry.
No fabric conditioner
used.
Use fabric conditioner in
last rinse.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause
Remedy
Liquid detergent Liquid detergents
– Use a general purpose detergent
does not give the usually contain no
containing a bleaching agent.
required result.
bleaching agents.
They do not remove
fruit, coffee and tea
stains.
– Pour stain removers into
compartment j of the dispenser
drawer and liquid detergent into a
dispenser ball.
– Never put stain removers and
liquid detergent together in the
dispenser drawer.
Grey, greasy
Insufficient amounts of – Use more detergent.
particles cling to detergent were used
washed laundry. to break down the
particles of grease in
– Before washing the next load run
a Cottons 95°C programme with
powder detergent but without a
load.
heavily soiled laundry.
A stale smell is
in the drum and washing.
on laundry.
Low temperature
Before washing the next load run a
Cottons 95°C programme with
powder detergent but without a
load.
White residues
which look like
powder detergent (zeolites) to aid water
The detergent
contained compounds
– Try and brush off the residues
with a soft brush once the laundry
is dry.
are seen on dark softening which are
– Wash dark textiles using a
detergent which contains no
zeolites. Liquid detergents
usually contain no zeolites.
textiles after
washing.
not soluble in water.
They have ended up
on the laundry.
Clothes are
coming out
creased.
Programme was
overloaded.
– Reduce quantity of clothes in
drum.
The wrong programme – Check care labels and the
was used.
programme chart.
– Use easy iron conditioners.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The drum door does not open when you press the Door button
Possible cause
Remedy
The machine is not
connected to the
Insert the plug in the socket and switch on and / or
switch the machine on with the I-On/0-Off button.
electricity supply and / or
is not switched on.
The safety lock has been
activated.
Deactivate the safety lock as described in "Safety
lock".
The electronic system lock Deactivate the system lock as described in the
has been activated.
"Settings menu J".
Power cut.
Open the drum door as described in the next
section.
The door was not correctly Press hard against the lock side of the drum door
engaged.
and then press the Door button.
There is still water in the
drum and the machine is
unable to drain.
Clean the drain filter and drain pump as described
in the next section.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
Blocked drain outlet
If the drain outlet is blocked, up to
25 litres of water will be retained in the
machine.
^ Switch the washing machine off.
There is a lever behind the detergent
drawer fascia panel.
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the machine
^ Place a suitable container under the
access flap.
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Unscrew the drain filter lid until water
runs out.
To interrupt the flow of water:
^ Tighten the drain filter back up again.
^ Use it to open the access flap.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Once the flow of water ceases:
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the drum door
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
^ Remove the drain filter completely.
^ Clean it thoroughly.
^ Pull the emergency release
downwards (see illustration). The
drum door will open.
^ Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
obstruction should be removed.
^ Put the drain filter back in place and
secure.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Changing the lamp for the
drum lighting
The washing machine will still
operate with no lamp in place or if the
lighting is faulty.
^ Remove the yellow lever from behind
the detergent drawer facia panel as
described previously.
^ Press the two prongs to separate the
plastic holder 1 from the protective
cover 2.
^ Switch the washing machine on and
open the drum door.
^ Now disconnect the washing
machine from the electricity supply,
see "Warning and Safety
instructions".
^ Remove the faulty lamp from the
plastic holder.
The new lamp must be of the same
type (G4) with a maximum power
output of 5 watts/12 volts.
The lamps are available from an
electrical retailer, your Miele Dealer or
from the Miele Spare Parts Department.
^ Insert the new lamp into the plastic
holder.
^ Carefully fit the plastic holder and the
protective cover together.
^ Insert the lighting unit back into the
socket and turn it clockwise to secure
it.
^ Insert the lever into the slot in the
drum lighting unit (see illustration)
and turn anti-clockwise (a quarter
turn) until you feel a resistance.
It is absolutely essential for the
correct functioning of the washing
machine that the drum lighting unit
is fitted correctly in position.
^ Pull out the loosened unit with your
fingers.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator or check light marked PC
is the interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele dealer or
– the Miele Service Department (see
back cover for contact details).
When contacting your Dealer or the
Service Department, please quote the
model and serial number of your
appliance, both of which are shown on
the data plate visible above the
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional accessories
porthole glass when the door is open.
Optional accessories for this washing
machine are available from your Miele
Dealer or from the Miele Spare Parts
Department.
Please note that telephone calls may
be monitored and recorded for
training purposes.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aInlet hose with "Waterproof" system
hDetergent dispenser drawer
bElectricity supply cable
iDrum door
c - f Flexible drain hose (with
jAccess to drain filter, drain pump
detachable swivel elbow)
and emergency release
gFascia panel with controls
kHandle recesses for moving the
machine
lFour height adjustable feet
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aProtruding lid for holding when
eTransit bar covers
moving the machine
fRestraining clip for inlet hose and
bElectricity supply cable
cInlet hose with "Waterproof" system
dDrain hose
drain hose
gRestraining clips for transit bars
when removed
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Installing the washing machine
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installation site hold
it by the edge of the lid where it
protrudes to the rear of the washing
machine as well as by the handle
recesses at the front.
Please note the following points:
Please note:
^ The machine must be level and
securely positioned.
^ Do not lift the machine by the drum
door.
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
If installing on a wooden joist floor:
^ We recommend a plywood base
(at least 59x52x3 cm). The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables.
Removing the transit fittings
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a
raised plinth, it has to be secured
against slippage during spinning
using retaining clips (available from
the Miele Spare Parts Dept).
^ To remove the left and right covers
1. Use a screwdriver to prise out the
cover as illustrated.
2. Pull the cover forwards to remove.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied turn the
left-hand transit bar 90°, then
^ Turn the right-hand transit bar 90°,
then
^ withdraw the transit bar.
^ withdraw the transit bar.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
^ Using the spanner supplied turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
^ Use a spirit level to check the
machine is standing level.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
False values may also show in the Load
and Detergent display.
Screwing out and adjusting the feet
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Washer and Dryer stack
The fitting of building under kits and
stacking kits must only be
undertaken by qualified and
competent persons, in accordance
with the instructions supplied with
the kit.
A Miele tumble dryer can be stacked
with the washing machine. A "WTV"
stacking kit* is necessary and can be
purchased from the Miele Spare Parts
Department.
Please note
Building under a continuous
worktop/in a kitchen run
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– A special building under conversion
kit* is required.
The machine lid must be replaced by
a cover plate. To ensure electrical
safety the cover plate must be fitted.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
a Safety distance to wall:
at least 2 cm
b Height:
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Fitting instructions are supplied with the
conversion kit.
All parts marked* are available from the
Miele Spare Parts or Sales Department.
Replacing the lid
If the lid has been removed in order to
fit a stacking kit or cover plate, ensure
that, if the lid is replaced, it fits securely
into the rear holders. Otherwise, it is not
properly secure for transport.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele Waterproof system
2) Electronic unit and washing
machine housing
The Miele Waterproof system protects
the washing machine from water
damage.
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water from
flowing into the machine and water in
the suds container is pumped away.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the washing
machine housing
– Overflow protection
3) the drain hose
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
1) Inlet hose
– The inlet hose is fitted with an
additional electrical safety valve
which works like an automatic
stopcock and is housed in the inlet
hose connection box.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
– It is pressure tested to between
7,000 and 10,000 kPa.
– The inlet hose has a protective
sleeve.
Any leaking water from the inlet hose
is fed into the sump through this
protective sleeve. A float switches off
the safety valve, preventing any more
water from flowing into the machine
and water in the suds container is
pumped away.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water supply The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
washing machine has been designed
to comply with DIN regulations.
,The plastic casing of the safety
valve contains electrical
components. The Waterproof system
must only be connected to its own
stopcock. It must not be connected
to mixer taps or similar and must not
be fitted in areas where there is the
risk of water or other liquids
reaching it.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than
1,000 kPa it is essential to fit a reducer
valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
Do not get wet.
The washing machine is not suitable
for connection to a hot water supply
and connection to a household
water softener is not recommended.
The protective sleeve of the hose
must not be damaged or kinked.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Maintenance and care
If you intend to unscrew the Miele
Waterproof system hose from the
stopcock it is essential to disconnect
the machine from the electricity supply
first.
Only use a Miele Waterproof system
hose should you need a replacement.
In order to protect the water inlet
valve, the dirt filter in the water inlet
valve connection must not be
removed.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
This hose is tested to withstand
pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
N.B. Using this hose renders the
Waterproof system safety valve on the
inlet hose ineffective.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Drain hose connection:
1. Direct into a sink or basin:
Please note the following
The machine drains via a drain pump
with a delivery head of 1 metre*.
– Hook the hose over the edge and
secure.
The drain hose must not be kinked as
this restricts drainage. The swivel elbow
at the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can be purchased
from the Miele Spare Parts Department
or your Miele dealer.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
* For a delivery head of more than 1 m
(up to a maximum of 1.8 m) a second
duo-drain pump is available with the
corresponding kit from the Miele Spare
Parts Department or your Miele Dealer.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
national and local safety regulations.
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. The voltage and connected
load are given on the data plate.
Please ensure these match the
household mains supply. The fuse
rating is quoted on the plug.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Max. load
Consumption data
Energy
in kWh
1.99
Water
in litres
49
Duration
Short
Normal
Cottons
95°C
6.0 kg
6.0 kg
3.0 kg
6.0 kg
3.0 kg
3.0 kg
2.0 kg
3.5 kg
3.0 kg
2.0 kg
1.0 kg
3.0 kg
3.0 kg
2.0 kg
2.0 kg
2.0 kg
2.0 kg
1 pillow
2.0 kg
2 h 09 min
1 h 49 min
1)
60°C
60°C
1.02
49
0.73
39
1 h 03 min
1)
40°C
40°C
40°C
0.65
55
1 h 59 min
2)
1)
0.36
39
59 min
Minimum iron
Delicates
Automatic
Express
0.50
55
59 min
1 h 19 min
59 min
30°C
40°C
40°C
30°C
30°C
40°C
40°C
60°C
40°C
40°C
40°C
60°C
40°C
0.35
69
49 min
0.35 - 0.50
0.30
40 - 55
34
1 h 03 min
1 h 18 min
30 min
–
Woollens /
Silks /
0.23
39
–
39 min
0.25
39
–
36 min
Dark garments
Denim
0.60
60
1 h 00 min
50 min
1 h 02 min
47 min
53 min
–
1 h 10 min
1 h 00 min
1 h 12 min
1 h 07 min
1 h 03 min
55 min
0.50
52
Shirts
1.00
59
Sportswear
Outerwear
Curtains
0.35
35
0.45
59
0.45
38
Pillows
0.65
39
–
59 min
Proofing
0.30
12
–
29 min
Note for test institutes:
1)
EN 60456 test programme
2)
Short programme for test institutes; the Short extra option must be selected.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any additional options
selected.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
85.0 cm
59.5 cm
58.0 cm
97.5 cm
94 kg
Width
Depth
Depth with door open
Weight
Maximum floor load
Capacity
1600 Newton (approx. 160 kg)
6 kg dry laundry
see data plate
see data plate
see plug
Voltage
Connected load
Fuse rating
Consumption data
Water flow pressure minimum
Water flow pressure maximum
Inlet hose length
Drain hose length
Connection cable length
Drain pump head max.
Drain pump length max.
Lamp for drum lighting
Test certificates awarded
see "Consumption data"
100 kPa (1 bar)
1000 kPa (10 bar)
1.60 m
1.50 m
1.60 m
1.00 m
5.00 m
Type G4 (5 watts/12 volts)
Radio / TV suppression, VDE
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
for changing standard settings
The Settings menu is used to alter the washing machine's electronics to suit
changing requirements.
Settings can be altered at any time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
To open the Settings J menu
Time Y
ASwitch on the appliance. The main
First select either a 24 hour or 12
hour clock or to not have a clock
displayed at all.
menu will appear.
BAfter 5 seconds an additional line will
appear in the display.
Then set the current time of day.
15:03
To select a 24 hour or 12 hour clock
Select programme
^ Use the – and + buttons to select the
clock option setting you want and
confirm your selection by pressing
the OK button.
Settings F ...
CPress the OK button.
DThis will take you into the Settings
The display for setting the time will then
appear.
menu.
EUse the – and + buttons to select the
setting you want and confirm your
selection by pressing the OK button.
To set the time of day
12:00
If you do not make a selection in the
Settings menu and in its sub-menus
within approx. 20 seconds, the menu
display will revert to the main menu.
Set the time
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes
and confirm with the OK button. The
display will return to the Settings
menu.
Language F
The display can be set to appear in
one of several different languages.
You can select the language you want
via the Languages sub-menu.
The time of day can also be set by
pressing the m button after switching
the washing machine on, before
selecting a programme.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
A tick L will appear beside the
language to show that it has been set.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Water plus T
Gentle action U
This setting is used to select the
water intake setting for the Water plus
extra option.
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
There are three different options:
Water + (the machine is delivered with
this option selected)
The water intake is increased in the
wash and rinse stages of the
programmes.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
Extra rinse
The washing machine is delivered with
the Gentle action setting deactivated.
An extra rinse is introduced in the
Cottons and Minimum iron
programmes.
A tick L will appear beside the option
to show that it has been set.
Water + and Extra rinse
Suds cooling R
^ The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced in
the Cottons and Minimum iron
programmes.
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
A tick L will appear beside the option
to show that it has been set.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling deactivated.
A tick L will appear beside the option
to show that it has been set.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Lock X
^ After the last number has been
entered, press the OK button.
The system lock prevents your
machine being used without your
knowledge.
Yes
1 2 5
No
When the system lock has been
activated, you have to enter a code
after switching the washing machine
on. Otherwise the washing machine
cannot be operated.
Confirm lock code
^ Confirm the code with the OK button
or if you want to correct a mistake,
press the – button.
^ The lock will now be activated when
the washing machine is switched off.
To activate the lock
C
Back A
To unlock the machine
X
Activate
When the machine is switched on
again, the display will request the lock
code.
^ Select Activate and confirm your
selection.
^ Enter lock code 125 as described
above and confirm the entry.
^ The display will now request that a
code is entered. The code is 125 and
cannot be altered.
Code OK.
W
Ready
To enter the lock code
The code is: 125
The washing machine is now unlocked.
To deactivate the lock
0
__ __
Proceed as for activating the lock.
Enter lock code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now set the second number.
^ Repeat the process until all three
numbers have been entered.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Temperature S
Keypad tone P
You can chose for the temperature to
be displayed as °C/Celsius or
°F/Fahrenheit.
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone switched off.
A tick L will appear beside the option
to show that it has been set.
A tick L will appear beside the option
to show that it has been set.
Buzzer O
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
Display contrast
There are ten different display
contrast settings.
There are two volumes:
The machine is delivered with the
display contrast on setting 5.
Normal (the machine is delivered with
this option selected)
The display contrast will change as
soon as a different setting is chosen.
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Brightness
Loud
There are ten different display
brightness settings.
The buzzer sounds at maximum volume
at the end of a programme or when
Rinse hold is reached.
The machine is delivered with the
display brightness on setting 5.
A tick L will appear beside the option
to show that it has been set.
The display brightness will change as
soon as a different setting is chosen.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Standby Q
Memory V
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start/Stop button will start
flashing slowly.
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
There are two options:
On
When this programme is chosen again
these settings will appear in the display.
Standby is activated:
– if a programme is not selected after
the machine has been switched on.
The machine is delivered with the
memory function deactivated.
– after a programme has started.
– at the end of a programme.
A tick L will appear beside the option
to show that it has been set.
Not in current Prog. (the machine is
delivered with this option selected)
To close the Settings menu
C
Back A
Language F
Time ...
Standby is activated:
– if a programme is not selected after
the machine has been switched on.
H
^ Select Back and confirm your
selection.
– at the end of a programme.
Pressing one of the buttons switches
the display back on again.
A tick L will appear beside the option
to show that it has been set.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/4505/W 3652 WPS
M.-Nr. 06 618 280 / 02
en - GB
Download from Www.Somanuals.com. All Manuals Search And Download.
|