Miele Washer W 149 User Manual

Operating instructions

for Washing machine

W 149

It is essential to read these

operating instructions before

installing or using the machine, to

avoid the risk of accident, or damage

to the machine.

M.-Nr. 05 681 810

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

General view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Before using for the first tim e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

How to wash correctl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Brief guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Before washin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3

To s tart a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

After washin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8

Adding or removing laundry after programme start . . . . . . . . . . . . . . . . . . . . . . . 19

Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . interruption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . alteration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adding detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

It is important to dispense the correct amount, because . . . . . . . . . . . . . . . . . . . 21

Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Fabric conditioners, texturisers, liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Automatic dispensing of fabric conditioners, texturisers or starch to laundry at

the end of a programm e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3

Adding fabric conditioner or texturiser separately . . . . . . . . . . . . . . . . . . . . . . 23

Starching separatel y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Programme selectio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4

Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Care symbols - washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Soa k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0

Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

"Without final spin". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

"Rinse hold ". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1

To c ontinue the programme with a spin:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

To c ontinue the programme without spinning: . . . . . . . . . . . . . . . . . . . . . . . . . 31

Electronic programme locking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Maximum water level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Activating the i compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Soak time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

T o p-up rinse for Cottons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Cleaning the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Cleaning the detergent dispenser drawe r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2

Extra cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Cleaning the fluff (drain) filter and pum p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3

Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Opening the lid in the event of a power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

To c heck water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Customer contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Programme update function - P C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2

Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Levelling and adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Removing the transit fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Re-fitting the transit fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Connection to water suppl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5

Connection to the drainage syste m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

General view

aMains connection cable

bInlet hose

eMachine feet

fFlexible drain hose with

detachable swivel elbow

cLid with integrated control panel

dAccess panel for drain pump, drain

(fluff) filter and emergency lid release

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

Control panel

a"I-ON/0-OFF" button

e"Spin" button

To switch the machine ON or OFF or

for spin speed, Rinse hold and With-

to interrupt a programme

out final spin

c"Lid" button

fIndicator lights

opens the machine lid

showing the selected spin speed

d"START" button

gProgramme selector

can be turned clockwise and

anti-clockwise

starts the wash programme

eButtons for additional options

Indicator light on = selected

hProgramme sequence indicator

Indicator light off = not selected

lights

iCheck lights

Overview

A Inner lid

B Inner lid lock

C Detergent dispenser drawer

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

supply. If in any doubt, consult a quali-

fied electrician.

Read the operating instructions be-

fore using this machine for the first

time. They contain important infor-

mation about the safety, use and

maintenance of the machine. This

way you will avoid the risk of acci-

dents and damage to the machine.

Keep these operating instructions in

a safe place and ensure that new

users are familiar with the content.

Pass them on to any future owner of

the machine.

The electrical safety of this appli-

ance can only be guaranteed when

continuity is complete between the ma-

chine and an effective earthing system

which complies with local and national

regulations. It is most important that this

basic safety requirement is regularly

tested by a qualified electrician.

The manufacturer cannot be held re-

sponsible for the consequences of an

inadequate earthing system (e.g. elec-

tric shock).

Correct usage

Do not connect the appliance to

the mains electricity supply by an

extension lead. Extension leads do not

guarantee the required safety of the ap-

pliance (e.g. danger of overheating).

Only use the washing machine to

wash items which are specified by

the manufacturer to be machine-wash-

able on the wash-care label, and tex-

tiles composed of hand-washable wool

or wool blend fabrics as well as satin,

lace, silk and other hand-washable gar-

ments.

Any other applications may be danger-

ous. The manufacturer is not liable for

damage resulting from improper use or

operation.

The machine is built in accordance

with current safety requirements.

Unauthorised repairs could result in un-

foreseen dangers for the user, for which

the manufacturer cannot accept re-

sponsibility. Repairs should only be un-

dertaken by a Miele approved engi-

neer.

This appliance should not be oper-

ated by children. Supervise its use

by the elderly or infirm.

Ensure current is not supplied to the

appliance while maintenance or repair

work is being carried out.

The machine is only completely

isolated from the electricity supply

when:

Technical safety

Before setting up the machine,

check it for any externally visible

damage. Do not install and use a dam-

aged machine.

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the mains fuse is withdrawn.

Before connecting the machine,

ensure that the connection data on

the data plate (fusing, voltage and fre-

quency) match the mains electricity

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

This machine must only be con-

Before using the machine for the

nected to the on-site water supply

using a new hose kit. Old hoses must

not be re-used. Check the hose regu-

first time, check that the transit fit-

ting at the rear of the machine has been

removed (see section on "Installation").

larly for signs of wear and tear. Change During spinning, a transit fitting which is

in good time to avoid the risk of leaks

and subsequent damage.

still in place may result in damage to

both the machine and adjacent furni-

ture or appliances.

Faulty components must only be

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

Turn off the stopcock if the ma-

chine is to be left for any length of

time (e.g. holiday), especially if there is

no floor drain (gully) in the immediate

vicinity.

In countries where there are areas

which may be subject to infestation

by cockroaches or other vermin, pay

Flooding danger

If hooking the drain hose into a

particular attention to keeping the appli- wash basin, check that the water can

ance and its surroundings in a clean

condition at all times. Any damage

which may be caused by cockroaches

or other vermin will not be covered by

the appliance guarantee.

drain off quickly enough to prevent the

sink from overflowing.

Make sure the drain hose is secure, so

that the force of the water flowing out of

the hose does not dislodge it. Other-

wise this will result in flooding.

Use

Take care to ensure that foreign ob-

jects (e.g. nails, pins, coins, paper

clips) do not find their way into the ma-

chine with the washing. Foreign objects

may damage components of the ma-

chine (e.g. suds container, drum),

which in turn can result in damage to

the washing.

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However, it may be suitable for

such usage subject to a risk assess-

ment of the installation being carried

out by a suitably qualified engineer.

Do not install your washing ma-

chine in rooms where temperatures

below freezing may occur. Frozen

hoses may burst under pressure.The

reliability of the electronic control unit

may be impaired at temperatures below

freezing point.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

If the correct amount of detergent

is dispensed, the machine should

not need to be descaled. If, however,

you do wish to descale the machine

only use proprietary non-corrosive

descaling agents and strictly observe

the manufacturer’s instructions given on

the packaging. If in doubt, contact the

Miele Customer Service Dept. or your

Miele Dealer.

Accessories

Accessory parts may only be fitted

when expressly approved by Miele.

If other parts are used, guarantee, per-

formance and product liability claims

may be invalidated.

Disposal of your old machine

Before discarding an old machine

unplug it. Render the plug useless.

Cut off the cable directly behind the ap-

pliance to prevent misuse. This should

be done by a competent person.

Textiles which have been

pre-treated in solvent-based clean-

ing agents must be thoroughly rinsed in

clean water before being washed in the

machine.

Never use solvent-based cleaning

agents in this machine, as this may

result in damage to component parts

and create toxic fumes. Such deter-

gents also pose a fire and explosion

hazard.

Only use dyes specified by the

manufacturer as being suitable for

use in a domestic washing machine. Al-

ways observe the manufacturer's in-

structions carefully.

Colour run and dye removers con-

tain sulphur compounds which can

cause damage such as corrosion. Do

not use these products in this machine.

Always make sure the drum is sta-

tionary before reaching in to re-

move laundry. Reaching into a moving

drum is extremely dangerous.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing environmentally and economically

– Water consumption and energy us-

– Use the Short wash option for nor-

mally or very lightly soiled laundry.

age are determined by the size of the

load. Load to the maximum recom-

mended for the programme selected.

– Do not exceed the amounts of deter-

gent which may be recommended by

the manufacturer on the packaging.

– Programme durations can vary con-

siderably due to the automatic load

adjustment feature. Depending on

the amount of laundry, the main wash

may be shortened and one rinse

omitted.

– Reduce the amounts of detergent

with smaller loads, (e.g. with a half

load, approx. one third less deter-

gent).

– Select the highest suitable spin

speed in the wash programme when

tumble drying afterwards.

– Use the Mixed Wash programme or

the Quick Wash programme for

smaller amounts of laundry.

– To save energy wash normally and

lightly soiled laundry at lower tem-

peratures. The 95°C Cottons

programme is probably only needed

in exceptional circumstances, e.g.

for oil based stains or where a very

hot wash is required.

– A main wash (programme without

pre-wash) is sufficient to clean nor-

mally soiled laundry.

– By using the additional option Soak

for heavily soiled laundry you can se-

lect a lower temperature in the main

wash.

– Use the additional option Soak in-

stead of Pre-wash with heavily soiled

laundry.

If Soak is followed immediately by a

main wash the same suds are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Before using the machine for the first

time ensure that it is correctly in-

stalled and connected. See the rele-

vant section under "Installation".

Also check that the fluff filter is se-

curely tightened. Otherwise there is

a risk of water leakage during use.

For safety reasons spinning is not pos-

sible until the machine has been pre-

pared for using for the first time. To acti-

vate the spinning function you must run

a wash programme without any laundry

and without detergent.

Using detergent could result in an ex-

cessive build-up of foam.

This also activates the ball valve. The

ball valve prevents detergent escaping

from the suds container into the sump

during a wash programme, thus making

maximum use of the detergent.

^ Turn on the stopcock.

^ Press the I-ON/0-OFF button in.

^ Turn the programme selector to

COTTONS 40°C.

^ Press the START button.

When this programme has finished turn

the programme selector to "Finish". Your

washing machine is ready for using for

the first time.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Brief guide

^ Sort the washing by colour and by

care label symbols. Most garments

have a textile care label in the collar

or side seam.

The headings numbered (A,B,C,...)

show the operating sequence and can

be used as a brief guide.

Dark textiles often contain excess dye

and should be washed separately sev-

eral times before being included in a

mixed load. Always wash whites and

coloureds separately.

Before washing

ASort the laundry.

Delicate textiles should be washed sep-

arately in a delicates programme (use a

washing bag where appropriate).

– Curtains:

Remove lead weights and strips or

place in a laundry bag.

– Underwiring and collar stiffeners:

Any loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

– Knitted garments, trousers and

jeans, T-shirts and sweat shirts:

Turn inside out, if recommended by

the manufacturer.

^ Empty all pockets.

Foreign objects (e.g. nails, coins,

paper clips, etc.) can cause dam-

age to textiles and components in

the machine.

– Close any zips, fasten hooks and

eyes etc. before washing.

– Fasten duvet covers to prevent

smaller items rolling up inside them.

^ Badly soiled areas, e.g. collars and

cuffs, and water soluble stains can

be pre-treated with bar soap, liquid

detergent or detergent mixed into a

solution or paste.

Do not wash any items in this ma-

chine which are specified by the

manufacturer as non-machine

washable on the care label. (h

symbol)

With particularly stubborn stains ask

your dry cleaner for advice.

Do not use solvent-based cleaning

agents in this machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

BTo switch on the machine Press

the "I-ON/0-OFF" button.

CPress the "Lid" button.

^ Open the machine outer lid.

^ Press the drum lock (black arrow)

and at the same time push the front

flap inwards (in the direction of the

arrows) until the lock is released.

^ Support both flaps and let them

swing up.

^ Open the inner lid.

Load the drum:

^ Unfold laundry and load loosely in

the drum. To achieve optimum results

it is advisable to make up mixed

loads consisting of both large and

small items. This improves washing

efficiency and helps distribute the

load evenly to keep the machine sta-

ble and reduce noise during spin-

ning. Overloading impairs wash per-

formance and causes more creasing.

DOpen the drum:

Take care. The drum flaps are

spring-loaded.

^ Gently press your hand against the

rear drum flap.

Maximum load weights:

COTTONS . . . . . . . . . . . . . . . . . . 5.0 kg

MINIMUM IRON. . . . . . . . . . . . . . 2.5 kg

DELICATES / SYNTHETICS . . . . . 1.0 kg

SILK . . . . . . . . . . . . . . . . . . . . . . . 1.0 kg

WOOLLENS. . . . . . . . . . . . . . . . . 2.0 kg

QUICK WASH . . . . . . . . . . . . . . . 2.5 kg

MIXED WASH (Poly/Cottons). . . . 3.0 kg

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

EClose the drum:

Take care not to trap items of laun-

dry when closing the drum flaps.

^ First press the front, then the rear

drum flap down until both hooks

clearly engage.

Failure to observe these instructions

may cause damage to the machine

and to laundry.

^ Clean the roller on the left-hand hook

of the drum flap regularly to ensure

smooth operation is maintained.

FBefore closing the inner lid, pull up

the lock

and engage properly

If the inner lid is not closed properly,

the wash programme cannot start

and the "START" indicator light will

flash rapidly.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

To start a programme

– The programme selector should be

pointing to "Finish", the indicator light

"Finish" is lit up in the programme se-

quence display.

GPull out the detergent dispenser

drawer.

HAdd detergent.

Dispense according to the amount

specified on the packaging.

KTurn the programme selector to

the programme required.

See "Programme selection" chart.

– See section on "Adding detergents"

for details.

The detergent dispenser drawer

must then be pushed back in, other-

wise the machine outer lid cannot be

closed.

IClose the machine outer lid.

JOpen the stopcock.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

LSelect any additional option re-

quired.

A maximum of two additional options

can be chosen per wash programme,

provided they are compatible with the

programme selected, (see "Programme

selection" chart). Only one option can

be selected out of "Soak", "Pre-wash"

and "Short".

In some programmes the maximum

spin speed is limited. The machine will

not allow a higher spin speed to be se-

lected. (See "Programme selection"

chart).

NPress the "START" button.

The programme now starts.

At the beginning of the wash

programme a brief noise indicates

that the drum lock mechanism has

been released.

^ Press the button next to "Soak",

"Pre-wash" or "Short" repeatedly until

the indicator for the chosen option

lights up.

^ Press the button for the "Water plus"

option, if required.

An additional option that has been se-

lected can be de-selected by pressing

the button again.

MSelect a spin speed.

^ Press the "Spin" button repeatedly un-

til the indicator light next to the re-

quired final spin speed lights up.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

After washing

SClose the inner lid and the ma-

chine outer lid.

At the end of a programme

TTurn the programme selector to

When the "Finish" indicator light comes

on the laundry can be removed from

the drum:

the "Finish" position.

OPress the "Lid" button.

^ Open the machine outer lid.

POpen the inner lid.

QOpen the drum and remove the

laundry.

Do not forget to remove laundry from

the drum. Items left in the drum may

shrink. They could also discolour

items in the next wash or become

discoloured themselves.

RClose the drum.

Otherwise there is a danger of ob-

jects being placed inadvertently in

the drum. If these remained unno-

ticed and were washed in the next

load, they could damage the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Adding or removing laundry

after programme start

General exceptions:

The door cannot be opened when:

– the suds temperature is above 55°C.

– the programme lock is activated.

Laundry can be added or removed af-

ter any programme has already started.

^ Press the "Lid" button once.

– the programme has reached the "Fi-

nal spin" stage.

The drum automatically rotates to the

correct position for opening. The "Rinse

hold" and "Without final spin" indicator

lights flash alternately.

When the "Rinse hold/Without final spin"

indicator lights stop flashing and the

drum locking mechanism has been ac-

tivated, the lid can be opened:

^ Press the "Lid" button once again.

^ Open the machine outer lid.

^ Open the inner lid.

^ Open the drum.

^ Add or remove laundry.

^ Close the drum.

^ Close the inner lid properly.

^ Close the machine outer lid.

The programme will continue automati-

cally.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Programme . . .

To select a different programme pro-

ceed as follows:

. . . interruption

^ Switch off the machine using the

^ Press the "I-ON/0-OFF" button.

"I-ON/0-OFF" button.

^ To continue with the same

programme press the "I-ON/0-OFF"

button again.

^ Turn the programme selector to "Fin-

ish".

^ Switch on the machine using the

"I-ON/0-OFF" button.

. . . alteration

^ Select a new programme.

The machine will accept the following

changes after the "START" button has

been pressed:

^ Press the "START" button.

. . . skipping a programme stage

– Selection of a different temperature,

and/or selection or de-selection of

the "Water plus" option can be car-

ried out up to 6 minutes after

programme start.

^ Turn the programme selector to

"Finish".

As soon as the programme sequence

light starts flashing for the stage at

which the programme should continue:

– The spin speed for final spin can be

changed within the limits for the

programme.

^ Turn the programme selector to the

appropriate programme within 4 sec-

onds.

After start it is no longer possible

to select a different programme.

Programmes cannot be interrupted

or altered if the programme lock has

been activated.

If a different programme is selected or if

another temperature is selected 6 min-

utes after start, the "Finish" indicator

light flashes. This does not affect

programme sequence. The indicator

light goes out when the programme se-

lector is set back to the programme or

temperature previously chosen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

All modern detergents produced for

automatic washing machines are suit-

able, including liquid, compact (con-

centrated), tablets, liquid tablets and

special application detergents. Use dis-

pensing aids, e.g. balls, if these are

supplied with the detergent. Tablets are

suitable for full loads, but note that it

may be impractical to reduce tablets by

proportion to suit smaller loads.

Water Hardness

Hardness

range

Type of

water

Hardness

level in

°dH

German

(hardness) mmol / l

soft

medium

hard

0 - 1.3

1.3 - 2.5

2.5 - 3.8

over 3.8

0 - 7

7 - 14

14 - 21

over 21

III

very hard

It is important to dispense the

correct amount, because . . .

Woollens and knitwear containing wool

mixtures and hand-washable garments

should be washed using a detergent

specifically designed for washing

woollens.

. . . too little has the following results:

– Laundry will not be properly clean

and will in time become grey and

hard to the touch.

Silk should be washed using a liquid

detergent specifically designed for

washing woollens. Do not use biologi-

cal detergents on silk as the enzymes

may damage the silk!

– Greasy particles cling to the laundry.

– Limescale deposits on the heater el-

ements.

Add detergent according to the amount

recommended on the packaging. The

right amount to dispense will depend

on the following:

. . . too much results in the following:

– Excessive foam.

– Low level of agitation.

– The quantity of laundry.

– Poor washing, rinsing and spinning

results.

– The soiling level of the laundry.

Lightly soiled

No visible dirt or stains. Possibly

slight body odour.

– High water consumption (an addi-

tional rinse cycle will automatically

switch in).

Normally soiled

Visibly dirty and/or just a few slight

stains.

– Burdening the environment.

Heavily soiled

Stains and soiling clearly visible.

– The water hardness level

Check with your local water supplier

if you do not know the water hard-

ness level in your area.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

Water softeners

A water softener can be used to cut

down on the use of detergents in ex-

tremely hard water areas. Dispense ac-

cording to the amount specified on the

packaging. First add detergent and

then the water softener.

Dispense detergent as specified for

soft water areas.

Miele do not recommend connecting

the machine to a household water soft-

ener.

If you wash using several components

(e.g. special application detergents),

we recommend always dispensing the

agents into compartment j in the fol-

lowing order:

i = Compartment for pre-wash.

This compartment is also used

for starch formulations when

starching separately.

1. Detergent

j = Compartment main wash

2. Water softener

3. Stain remover

p = Compartment fabric conditioner

Water is taken in through compartment

This way the agents are distributed

more efficiently.

i in the pre-wash.

Water is taken in through compartment

j in the main wash. If the capacity of

compartment j is insufficient for the

amount of detergent needed for a

COTTONS programme (e.g. in very

hard water areas), the machine can be

programmed so that water and deter-

gent can also be taken into the main

wash through compartment i , see

"Programmable functions", "Activating

compartment i".

Fabric conditioners,

texturisers, liquid starch

Fabric conditioners make garments soft

and fluffy to handle and help prevent

static cling when tumble drying.

Texturisers are synthetic starch formula-

tions and give body to items e.g. shirts,

tablecloths and bed linen.

Starch gives body to items of washing.

^ Dispense according to the amount

specified on the packaging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

Automatic dispensing of fabric

Adding fabric conditioner or

conditioners, texturisers or starch to

laundry at the end of a programme

texturiser separately

^ Add fabric conditioner or texturiser to

compartment p.

^ Turn the programme selector to

"Starch".

^ Select a spin speed.

^ Press the "START" button.

Starching separately

^ Measure and prepare starch in ac-

cordance with the manufacturer’s in-

structions.

^ Add the starch to compartment i.

^ Turn the programme selector to

"Starch".

^ Add the fabric conditioner, texturiser

or liquid starch to compartment p.

Do not exceed the maximum level

mark.

^ Select a spin speed.

^ Press the "START" button.

^ Push the dispenser drawer back in.

The conditioner, texturiser or starch is

automatically dispensed in the final

rinse. At the end of the programme a

small amount of water remains in the

fabric conditioner compartment p.

If starching frequently, clean the dis-

penser drawer and especially the si-

phon tube and fabric conditioner

channel. (See section on the deter-

gent dispenser drawer in "Cleaning

and Care"). Do not add starch for-

mulations or viscous liquid starch to

the p compartment as it will clog it

up. See "Starching separately".

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Programme selection

Programme

Fabric

Temperature

max.

spin speed

COTTONS

Cottons and linen fabrics, e.g. bed linen, table

linen, towelling, jeans, underwear, T-shirts, nap-

pies.

95°C to 30°C

1200

COTTONS

Wash load as for standard tests.

60°C

1200

900

MINIMUM IRON

(60°C) white nylon, white polyester fabrics (50°C),

coloured nylon, polyester, cotton and viscose fab-

rics with special finishes, acrylic, cotton fabrics,

coloured polyester / cotton fabrics, (40°/30°C) min-

imum iron fabrics not washable at higher tempera-

tures

60°C to 30°C

DELICATES

Acrylics, acetate and triacetate, socks and stock-

ings in man-made fibres, (not wool or wool

blends).

40°C to cold

30°C to cold

30°C

600

400

Curtains, specified machine-washable by the

manufacturer (pre-wash probably advisable).

Silk

Programme for hand-washable fabrics with no

wool content, e.g. satin, lace and silk.

WOOLLENS

Programme for machine-washable or hand-wash-

able wool or wool blend fabrics.

40°C to cold

1200

QUICK WASH

Very lightly soiled fabrics, which can be washed in

the Cottons programme.

40°C

cold

1200

900

Starch

Table cloths, napkins, overalls, uniforms.

Drain/Final spin Articles which can be spun, e.g. handwashed

items, max weight according to fabric

Separate rinse

Articles which should be washed by hand and

only rinsed and spun in the machine

cold

MIXED WASH

Poly/Cottons

Suitable for small loads of garments made from

man-made fibres and cotton garments which can

be washed together. Sort according to colour.

40°C

If "Cold" is selected for the temperature, the water is warmed to 24°C. This uniform temperature helps

the effect of the detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

max. load

Additional op-

tions*

Notes

5 kg

Soak

Pre-wash

Short

Water plus

(Option 1,2,3,4)

With heavily soiled items select "Soak" or "Pre-wash". Wash

dark colours in liquid detergent.

For normally soiled items select "Short".

5 kg

For test institutes: Programme setting for tests according to EN

60456 Standard Programme.

2.5 kg

Soak

Pre-wash

Short

Water plus

(Option 1,2,4)

With heavily soiled items select "Soak" or "Pre-wash".

For normally soiled items select "Short".

If fabrics have a high proportion of man-made fibres it is

advisable to programme the machine for "Gentle Action".

See "Programmable functions".

1 kg

Soak

Pre-wash

Short

Laundry remains relatively crease-free for easier ironing.

Use the Woollens programme for textiles with wool content.

Fill the drum

loosely 1/2 to

3/4 full

Soak

Pre-wash

Short

Dust in curtains usually makes pre-wash advisable.

1 kg

Short

Water plus

(Option 2,4)

Laundry remains relatively crease-free for easier ironing. Do

not separately spin at high speeds. If wished select "Without fi-

nal spin". Place socks, tights, bras etc., in a washing bag. Use

liquid detergent for washing woollens. Do not use biological

detergents on silk as the enzymes will damage the silk.

2 kg

Use liquid detergent for washing woollens.

Do not

overload

Hand washable garments will not shrink, stretch, matt or felt

beyond the accepted tolerance. If necessary, manually reduce

the spin speed or select "Without final spin".

2.5 kg

5 kg

3 kg

Water plus

(Option 1,2,4)

Add less detergent (half load).

The laundry should be washed, but not treated with fabric

conditioner.

For drain only, select "Without final spin".

Do not use for woollens

Soak

Pre-wash

Short

Water plus

(Option 1,2,4*)

The water level, number of rinses and programme time are set

automatically in relation to composition of the laundry (see

"Programmes - Sequence").

*Option is only carried out with a high proportion of cotton

* See Section on Additional options for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Sequence

COTTONS

MINIMUM DELICATES

IRON

Silk

WOOL-

LENS

Soak

optional

Pre-wash

optional

Main wash

Top-up rinse from 75°C

pro-

grammable

Graduated rinsing

from 40°C

No. of rinses

- normal

3 or 4

- part load

- short

Rinse and interim spin (rpm)

Final spin (rpm)

Rinse hold

max. 1000

max. 1200

optional

normal

max. 500

max. 900

optional

normal

max. 600

max. 1200

optional

Wool

max. 600

optional

max. 400

optional

Silk

Without final spin

Wash rhythm

gentle

action

Water level - Wash

low

medium

high

medium

Rinse

Explanations:

ß Programme section included

Programme section not included

Load recognition:

The programme sequence is modified in these programmes according to the absorbency of the load.

A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed lower

than 700 rpm has been selected.

Silk:

In this programme to achieve the best washing results, the washing action is lower than in the

DELICATES programme but higher than in the WOOLLENS programme.

Wool:

Wool is susceptible to damage from movement when it is wet. The wash action during the course of

the programme is low.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

QUICK WASH

40°C

Starch

Drain/

Final spin

Separate rinse

MIXED WASH

high cotton

content

high polyester

content

optional

3 or 4

max. 500

max. 1200

optional

normal

max. 900

optional

normal

max. 500

max. 900

optional

normal

max. 1200

optional

normal

max. 1200

optional

gentle action

low

medium

low

medium

high

Top-up rinse (programmable):

At the end of the main wash additional water flows into the drum, and the suds are cooled slightly. Hot

water might damage plastic drain pipes.

Graduated rinsing:

The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter-

vals thereby minimising crease formation.

Rinse and interim spin:

There is a spin between the rinses.

Final spin:

The maximum spin speed according to the programme can be selected with the Spin button. In the

programmes MINIMUM IRON, DELICATES, WOOLLENS, Separate rinse and MIXED WASH, the spin

speed is automatically limited to the maximum spin speed given above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Care symbols - washing

Care

symbols types

Fabric

Description of Programme:

process

no bar

Cottons

Normal (maxi-

mum) machine

action and nor-

mal spinning

Cottons, Minimum iron, Quick wash

single bar

Synthetics Reduced (me- Delicates

dium) machine

action and re-

duced spinning

*If the gentle action option has been

programmed into your machine via the

programmable functions, garments

with a single bar under the care label

f can also be processed using a

Cottons, Minimum Iron, Quick wash,

Mixed Wash or Starch programme.

Woollens Much reduced Hand Wash Woollens programmes.

broken

bar

(minimum) ma-

chine action but

with normal

spinning

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Important - other care symbols

Hand wash (if a temperature

is not specified, use the low-

est temperature or cold)

Do not wash

apf Dry clean

Do not dry clean

Suitable for chlorine bleach-

ing

Do not use chlorine bleach

Tumble dry

At normal temperature

At low temperature

Do not tumble dry

Ironing

Hot iron

Medium hot iron

Cool iron

Do not iron

N.B. If you have any textiles with the

older wash care labels, select a

programme according to the label be-

low:

[:\]

?;\

Cottons

Minimum iron

Delicates

Woollens

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

To select an additional option to the ba- Adding detergent for the Soak op-

sic programme press the button for that tion:

option. The indicator light for the option

Add the total amount into compart-

comes on.

ment j or directly on to the laundry

in the drum.

If an additional option is chosen which

is incompatible with the basic

programme, (see Programme selection

chart), the indicator light goes out when

the button is released.

Pre-wash

For heavily soiled and stained items

If a spin speed is chosen which is un-

suitable for the programme (see

Programme selection chart), pressing

the button has no effect.

Short

This shortens the programme running

time. For normally soiled items.

Soak

In the COTTONS, MINIMUM IRON and

MIXED WASH Poly/Cottons

programmes only two rinse cycles are

carried out with a higher water level.

For heavily soiled and stained items

with protein stains (e.g. blood, fats

and oils, cocoa).

– A length of time of between 30 min-

utes and 2 hours can be chosen, in

30 minute periods, for the Soak pro-

cess.

– The machine is set as standard to

two hours soak time.

See the section "Programmable func-

tions" for reprogramming to a differ-

ent time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

Water plus

Spin

The water level increases in the

"COTTONS", "MINIMUM IRON",

" QUICK WASH" and "MIXED WASH"

programmes.

A final spin is carried out at the end

of each of the basic programmes, if a

spin speed has been selected.

"Without final spin"

You can choose between four options

for the "Water plus" button.

Interim rinse and spin is carried out

during the programme cycle.

The options are explained in "Water

plus system" in the "Programmable

functions" section.

Laundry is not spun after the final rinse.

After water has been drained the ma-

chine switches automatically to "Finish".

Switching off the additional options

"Rinse hold"

If an additional option is switched on,

the indicator light next to the corre-

sponding button is lit up. The option

can be switched off by pressing the

button again. The indicator light goes

out.

Interim rinse and spin is carried out

during the programme cycle.

The laundry remains suspended in wa-

ter after the final rinse.

This helps to reduce the possibility of

creasing if the washing is left for some

time before being taken out of the ma-

chine.

To continue the programme with a

spin:

Use the "Spin" button to select the re-

quired spin speed.

The maximum spin speed is automati-

cally limited according to the basic

wash programme chosen. (See

"Programme selection" chart).

To continue the programme without

spinning:

Press the "Lid" button. The water will

then drain out of the machine. Once it

has drained out press the "Lid" button

again and open the drum.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

Electronic programme locking

Switching off programme locking

early

Programme locking prevents the ma-

chine from being opened or the

programme being changed during a

wash programme.

APress the "START" button for at least

5 seconds.

Exception:

If the "Finish" indicator light in the Se-

quence display is flashing:

Switching on programme locking

ASelect a programme, (see "How to

ATurn the programme selector to the

programme previously chosen. The

"Finish" light goes out.

wash correctly").

BPress the "START" button for at least

5 seconds.

BThen press the "START" button for at

Programme locking is now activated.

least 5 seconds.

The machine will now not accept any

changes, and the wash programme

proceeds through to the end.

To check if programme locking is

switched on

^ Press the ‘Spin’ button.

At the end of the wash programme, the

programme lock deactivates, so that a

new wash programme can be chosen.

– If the selected spin speed does not

change:

Programme locking is activated.

– If the spin speed changes:

Programme locking is not activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Maximum water level

Selecting the programmable function

To select the "Maximum water level"

programmable function: turn the

programme selector to -

The water level for rinsing is automat-

ically raised to the maximum level

where rinse results are particularly

important.

DELICATES 40 °C ***.

Activating

It is effective for the rinses in the follow-

ing programmes:

To activate "Maximum water level" press

the "START" button once.

The "Rinses" light comes on in the se-

quence display.

- COTTONS

- MINIMUM IRON

- QUICK WASH

Storing in memory

- MIXED WASH - Poly/Cottons

To store the "Maximum water level" pro-

grammable function in the memory

SWITCH the machine OFF with the

"I-ON/0-OFF" button.

Before the "Maximum water level" pro-

grammable function can be selected

you must first select programming

mode.

The "Maximum water level" programma-

ble function is now stored in the ma-

chine’s memory and is effective in the

programmes described above until

such time as you may wish to deacti-

vate it.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

Deactivating

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

To deactivate the use of a maximum

water level in the rinses repeat the pro-

cedure given above from point A as far

as the *** shown above. Press the

START button and the "Rinses" indicator

light will go out. The function is now de-

activated. Store in memory by pressing

the "I-ON/0-OFF" button.

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Water plus system

Before the "Water plus system" pro-

grammable function can be selected

you must first select programming

mode.

The "Water plus" button offers four

options, increasing water level and /

or bringing in an extra rinse cycle. To

activate the option press the "Water

plus" button when selecting your

wash programme before pressing the

START button.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

Option 1

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

Increase in the rinse water level in the

COTTONS, MINIMUM IRON, QUICK

WASH and MIXED WASH - Poly/Cottons

programmes, where for example rinse

results are particularly important.

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

Option 2

The indicator light "Main wash" flashes

in the sequence display.

Increase in the water level in main wash

and rinses for COTTONS, MINIMUM

IRON, QUICK WASH, Silk and MIXED

WASH particularly for fabrics that need

special care, or where extra attention

must be given to dissolving detergent.

This option is already set when the ma-

chine is delivered from the factory.

Selecting the programmable function

To select the "Water plus system" pro-

grammable function turn the

programme selector to

- DELICATES 30 °C .

The indicator lights in the sequence

display correspond to the four options

available. As Option 2 has been set at

the factory, when the programme selec-

tor is turned "DELICATES 30 °C ", the in-

dicator light for Option 2 "Rinse hold"

will come on.

Option 3

An extra rinse cycle is introduced to the

COTTONS programme, e.g. when rinse

results are particularly important.

Option 4

Increase in the water level in the main

wash and rinses for the COTTONS,

MINIMUM IRON, QUICK WASH, Silk

and MIXED WASH - Poly/Cottons

programmes. An extra rinse cycle is in-

troduced in the COTTONS programme -

useful for those whose skin is sensitive

to detergent.

. . . Turn to next page . . .

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Selecting the Options

Storing in memory

By pressing the "START" button a vari-

When you have selected the Option you

ous number of times you can select the require, SWITCH the machine OFF with

other options. To confirm that a new se- the "I-ON/0-OFF" button. The Option is

lection has been selected the previous

indicator light goes out and a new indi-

cator light comes on.

now stored in the machine’s memory.

Each time "START" is pressed a differ-

ent indicator light will come on. The in-

dicator lights correspond the the four

options available as follows:

Option 1 = "Rinse"

Option 2 = "Rinse hold"

Option 3 = "Drain / Final spin"

Option 4 = "Finish"

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Activating the i

Selecting the programmable function

compartment

To select the "Activating the i com-

partment" programmable function turn

the programme selector to

This function should be activated if

traditional "big box" detergents are

used. For the first 10 seconds of the

main wash cycle water flows in

through compartment i.

- Silk 30 °C ***.

Activating

To activate "Activating the i compart-

ment" press the "START" button once.

The "Rinses" light comes on in the se-

quence display.

Compartment j may sometimes not

be able to hold the total amount of de-

tergent required when:

- the water is very hard (over 3.8

mmol/l, water hardness level IV) and

Storing in memory

To store the "Activating the i compart-

ment" programmable function in the

memory SWITCH the machine OFF with

the "I-ON/0-OFF" button.

- the washing is heavily soiled.

In this case compartment i can be

used to flush in the extra detergent for

the main wash.

The "Activating the i compartment"

programmable function is now stored in

the machine’s memory.

Before the "Activating the i compart-

ment" programmable function can be

selected you must first select program-

ming mode.

Deactivating

To deactivate the use of Compartment

i repeat the procedure given above

from point A as far as the *** shown

above. Press the START button and the

"Rinses" indicator light will go out. The

function is deactivated. Store in mem-

ory by pressing the "I-ON/0-OFF" but-

ton.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Soak time

Selecting the programmable function

To select the "Soak time" programmable

function turn the programme selector to

- WOOLLENS Cold.

The "Rinse" indicator light comes on in

the sequence display. This shows that

a "Soak time" of 2 hours is currently se-

lected (factory setting).

This is accessed for a programme by

pressing the SOAK button on the fa-

cia.

You can programme a soak time of:

- 2 hours (factory setting) or

- 1 hour 30 mins or

- 1 hour or

Selecting a different "Soak time"

By pressing the "START" button a vari-

ous number of times you can select dif-

ferent soak times. To confirm that a dif-

ferent soak time has been selected, the

previous indicator light goes out and a

new indicator light comes on.

- 30 mins.

A "Soak time" of 2 hours is set at the

factory. If you wish to change this stan-

dard setting to one of the times listed

above, you must first select program-

ming mode.

Each time "START" is pressed a differ-

ent indicator light will come on. The in-

dicator lights correspond to the 4 soak

times available as follows:

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

2 hours =

"Rinse"

1 hour 30 mins = "Rinse hold"

1 hour =

"Drain / Final spin"

"Finish"

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

30 mins =

Storing in memory

C. . . switch the machine on with the

"I-ON/0-OFF" button.

When you have selected the soak time

you require, SWITCH the machine OFF

with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

The "Soak time" you have selected is

now stored in the machine’s memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Gentle action

Selecting the programmable function

To select the "Gentle action" program-

mable function turn the programme se-

lector to -

For gentle washing of slightly soiled

items. Drum action is reduced.

MIXED WASH 40 °C ***.

Gentle action can be used with the

COTTONS, MINIMUM IRON, QUICK

WASH, Starch and MIXED WASH

programmes.

Activating

To activate "Gentle action" press the

"START" button once.

The "Rinses" light comes on in the se-

quence display.

If "Gentle action" has been pro-

grammed, every wash cycle in these

programmes is carried out with gentle

action rhythm.

Storing the programmable function

in memory

Before the "Gentle action" programma-

ble function can be selected you must

first select programming mode.

To store the "Gentle action" programma-

ble function in the memory SWITCH the

machine OFF with the "I-ON/0-OFF" but-

ton.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

The "Gentle action" programmable

function is now stored in the machine’s

memory.

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

Deactivating

If the "Gentle action" programmable

function is no longer required it can be

deactivated. To do so repeat the proce-

dure given above from point A as far

as the *** shown above. Press the

START button and the "Rinses" indicator

light will go out. The function is now de-

activated. Store in memory by pressing

the "I-ON/0-OFF" button.

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Top-up rinse for Cottons

Selecting the programmable function

To select the "Top-up rinse for Cottons"

programmable function turn the

programme selector to -

Starch ***.

At the end of the main wash addi-

tional water flows into the drum and

the suds are cooled down.

Hot suds can damage plastic drainage

pipes.

Activating

To activate "Top-up rinse for Cottons"

press the "START" button once.

The "Rinses" light comes on in the se-

quence display.

Top-up rinse takes place when temper-

atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

Storing in memory

To store the "Top-up rinse for Cottons"

programmable function in the memory

SWITCH the machine OFF with the

"I-ON/0-OFF" button.

– where the drainage pipes do not

comply with DIN 1986.

The washing machine is delivered with

the Top-up rinse for Cottons deacti-

vated.

The "Top-up rinse for Cottons" program-

mable function is now stored in the ma-

chine’s memory.

Before the "Top-up rinse for Cottons"

programmable function can be se-

lected you must first select program-

ming mode.

Deactivating

If the "Top-up rinse for Cottons" pro-

grammable function is no longer re-

quired it can be deactivated. To do so

repeat the procedure given above from

point A as far as the *** shown above.

Press the START button and the

"Rinses" indicator light will go out. The

function is now deactivated. Store in

memory by pressing the "I-ON/0-OFF"

button.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Memory function

To activate the "Memory" function press

the START button once. The rinses light

comes on in the Sequence display.

If an additional option is selected for

a programme, and / or the spin

speed is altered, the machine stores

these changes in memory at the start

of a programme.

Storing in memory

To store this setting in memory SWITCH

the machine OFF with the

"I-ON/0-OFF" button.

The memory function is not active when

the machine is first delivered but can

be programmed to active.

Deactivating

To deactivate the memory function re-

peat the procedure given above from

point A as far as the *** shown above.

Press the "START" button and the

"Rinses" indicator light will go out. The

function is now deactivated. Store in

memory by pressing the

Activating

First select programming mode.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

"Finish".

"I-ON/0-OFF" button.

BPress the additional option buttons

"Short" and "Water plus" at the same

time and hold pressed in and:

C. . . switch the machine on with the

"I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes

in the sequence display.

Activating the programmable func-

tion

To activate the "Memory" programmable

function turn the programme selector to

Separate rinse ***.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

E-Cloth

Disconnect the appliance from the

mains electricity supply and with-

draw the plug from the socket prior

to cleaning the machine.

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part number 98013530, which is suit-

able for cleaning surfaces such as

stainless steel, glass, plastic and

chrome without the use of chemicals. It

can be washed 300 times.

Do not use solvents, abrasive

cleaners, glass cleaners or all-pur-

pose cleaning agents.

These might damage plastic sur-

faces and other components be-

cause of the chemicals they contain.

The washing machine must not be

hosed down.

Cleaning the washing machine

^ Clean the casing, machine lid and in-

ner lid with a mild non-abrasive de-

tergent or soap and water. Wipe dry

with a soft cloth.

^ Clean the fascia panel with a damp

cloth and wipe dry with a soft cloth.

^ The drum can be cleaned using a

suitable proprietary stainless-steel

cleaning agent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the detergent

dispenser drawer

^ Remove the detergent dispenser

drawer.

^ Wash under running warm water.

^ Pull out the conditioner insert and the

siphon tube and wash under running

warm water.

^ Replace the conditioner insert and si-

phon tube and push the detergent

dispenser drawer back into position.

^ Also clean the channel over which

the siphon tube is inserted.

Extra cleaning

Carrying out a hot wash (70°C or

above) with powder detergent approx.

once every six weeks will help to en-

sure that no deposits build up in the

machine. These can occur when wash-

ing is mainly done at low temperatures,

and also lead to unpleasant smells. If

you have no reason to wash laundry oc-

casionally at this high temperature, then

carry out a 95°C Cottons programme as

a cleaning cycle with a biological pow-

der detergent and no laundry, at regu-

lar intervals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the fluff (drain) filter

and pump

^ Place a dish under the drain spout.

Check the drain filter initially after 3-4

washes to ascertain how often it is likely

to require cleaning.

With normal cleaning approx. 2 litres of

water run out.

If the drain outlet is clogged, more wa-

ter will be retained in the machine (up

to 25 litres).

Caution: If laundry has been washed

at a high temperature, water drain-

ing out of the machine will still be

hot. Danger of scalding.

^ Turn the fluff filter lid round 2-3 times.

Do not take it right out.

With large volumes of water the dish will

need to be emptied several times. Se-

cure the fluff filter back into position

and empty the dish before repeating

the procedure.

^ Use the (yellow) filter flap opener

supplied with the machine to open

the access flap.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

^ Clean the inside of the fluff filter hous-

ing.

^ Once the flow of water ceases, re-

move the fluff filter completely.

Remove any deposits of limescale and

detergent or foreign objects from the

thread of the filter housing and filter unit

as they can cause water to leak.

Limescale deposits are often a sign of

using too little detergent.

^ Clean the fluff filter thoroughly.

^ Remove any foreign objects (e.g.

buttons, coins, etc.) and fluff.

^ Turn the impeller by hand to make

sure it rotates freely. Any foreign ob-

jects causing an obstruction should

be removed.

^ Put the fluff filter back in place and

secure it.

Make sure the fluff filter is securely

tightened. Otherwise there is a risk

of water leakage during use.

After cleaning

^ Pour approx. 2 litres of water into the

detergent dispenser compartment

j to reactivate the ball valve which

keeps detergent in circulation in the

suds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the filter in the water

inlet

^ First turn off the stopcock.

^ Unscrew the threaded union connect-

ing the free end of the inlet hose to

the stopcock.

The washing machine has a filter to

protect the water inlet valve.

The accessible filter in the union in the

open end of the inlet hose should be

checked every six months, or more of-

ten if there are frequent interruptions to

the external water supply.

^ Remove rubber seal a from the re-

cess.

^ Using pointed pliers, take hold of the

plastic filter bar, remove the filter b

and clean.

^ Put the filter and seal back in the re-

verse order and reconnect the hose.

Turn on the stopcock and check the

connection is watertight. If water drips

out, tighten the connection.

Never forget to put the filter back in

place after cleaning it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Repair work to electrical appliances should only be carried out by a suitably

qualified person in accordance with local and national safety regulations. Un-

authorised repairs could be dangerous.

What to do, if . . .

Cause . . .

Remedy . . .

. . . the programme does not There is no power.

Check that:

begin.

The "Finish" indicator light is not

on or the "Start" indicator light is

not flashing.

– the lids are properly closed.

– the mains plug is plugged in.

– the fuse or circuit breaker has

not tripped.

. . . the "START" indicator is

flashing rapidly.

The inner lid is not locked.

Open the machine outer lid and

close the inner lid (the lock must

engage correctly).

. . . the "Check drain" indica- The water outlet is restricted.

tor flashes during the

– Clean the fluff (drain) filter

and drain pump.

programme, but the wash

programme is running nor-

mally.

– Has the drain hose been

fixed too high? Max. head

height: 1 m.

. . . the "Check drain" indica- The water outlet is blocked.

tor flashes during the

programme, but the

programme is not running

normally.

. . . foam is coming out of the There has been an excessive

– Use less detergent next time

and follow the recommenda-

tion on the packet.

front of the appliance.

build-up of foam which has es-

caped through an opening in

the detergent drawer.

– Take the water hardness into

account.

– Use a different low-lather de-

tergent.

. . . the programme does not

begin when the drain/final

spin programme is selected.

The machine has not been pre- – See the section "Before using

pared for using for the first time.

for the first time" for instruc-

tions on how to prepare the

machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do, if . . .

Cause . . .

Remedy . . .

. . . the "Check inlet" indica-

tor flashes during the

programme but the

programme is running nor-

mally.

The water inlet is restricted.

– The stopcock is not opened

far enough.

– The inlet hose is kinked.

– The water pressure is too low

– The filter in the inlet hose is

dirty. Clean it.

. . . the "Check inlet" indica-

tor flashes and the laundry

was not washed.

The water inlet is closed.

– Open the stopcock.

– Start the programme again.

. . . one of the following indi- There is a fault.

cator lights is flashing

– Press "I-ON/0-OFF" button to

release it.

"Soak/Pre-wash"

"Main Wash"

"Rinses"

– Turn the programme selector

to "Finish".

– Press "I-ON/0-OFF" button in.

– Re-start the programme.

"Rinse hold"

– If the indicator light starts

flashing again, call the Ser-

vice Dept.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do, if . . .

Cause . . .

Remedy . . .

. . . the indicator light

"Drain/Final spin" flashes

The final spin has not taken

place. The machine detected an

imbalance.

– Loosen and re-distribute the

laundry.

– Select the programme "Spin".

– Take into account the spin

speed of the relevant

programme.

. . . the indicator light "Fin-

ish" flashes

The position of the programme

selector was altered after the

start of the programme.

Programme sequence is not af-

fected. The indicator light goes

out when the programme selec-

tor is turned back to the

programme previously chosen.

. . . noises are heard at the

The drum locking mechanism is This noise is a normal part of

start of a programme or when being automatically activated.

laundry is added after

machine operation. (Not a fault).

programme start

. . . the lid cannot be opened, Press the "lid " button once. The When the indicator lights "Rinse

a noise can be heard and the drum will now rotate until it is in hold"/"Without final spin" stop

indicator lights "Rinse hold"

and "Without final spin" flash

alternately

the correct postion for opening. flashing, press "Lid" again and

open the lid.

. . . the lid cannot be opened The appliance is not plugged in Insert the plug into the socket.

to the electricity supply.

Power cut.

Open the lid, as described at

the end of this chapter.

The lids are not properly en-

gaged.

Close the lids properly.

Suds temperature is higher than

55°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do, if . . .

Cause . . .

Remedy . . .

. . . the machine shakes dur-

ing the spin cycle.

Level the machine. See installa-

tion.

. . . the laundry has not been The spin speed selected was

Select a higher spin speed next

time.

spun satisfactorily

too low.

The load was not distributed

evenly enough in the drum. To

protect the machine laundry was

only spun at a reduced speed.

Always mix large and small

items in the load.

. . . the pump makes strange These noises occur at the be-

noises.

ginning or end of a pump se-

quence as a normal part of op-

eration. They are not a fault.

. . . the drum opening is not

in the correct loading and un- matic drum positioning.

loading position.

Imbalance has prevented auto- – Turn the drum manually to the

correct position (until the

autopositioning mechanism

engages).

– Always mix large and small

items in the load. This im-

proves cleaning efficiency

and ensures better distribu-

tion of laundry in the spin cy-

cle.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do, if . . .

Cause

Remedy

. . . large residues of deter-

gent remain in the dispenser

drawer.

The water supply pressure is too – Clean the filter in the water in-

low.

let system.

– It may be useful to select

"Water plus".

Washing powder used with wa- Pour washing powder into the

ter softener tends to become

sticky.

dispenser before adding any

water softener.

. . . fabric conditioner is not

completely dispensed or too

much water remains in the p

compartment.

The siphon tube is either incor- Clean the siphon tube.

rectly positioned or clogged.

The fabric conditioner channel is Clean the fabric conditioner

clogged.

channel.

. . . grey, greasy particles

cling to washed laundry.

Insufficient amounts of deter-

gent were used to break down

the particles of grease in heavily

soiled laundry.

– Add more detergent.

– Before washing the next load

run a "COTTONS 95°C"

programme without a load.

(See "Extra cleaning" in

Cleaning and Care).

. . . there are white residues

which look like powder deter- pounds (zeolites) to aid water

The detergent contained com-

– Use detergents containing no

zeolites to re-wash the load.

gent on the washing.

softening which are not soluble

in water. These have ended up

on the washing.

– Liquid detergents usually

contain no zeolites.

– Try and brush off the residues

with a soft brush.

. . . liquid detergent does not Liquid detergents do not contain – Use a general purpose wash-

give the required result.

bleaching agents. They do not

remove fruit, coffee and tea

stains.

ing machine powder contain-

ing a bleaching agent.

– Pour stain remover (salts) into

the dispenser drawer com-

partment j, and liquid de-

tergent into a dispenser ball.

– Never put stain salts and liq-

uid detergent together in the

dispenser drawer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Opening the lid in the event of

a power failure

^ Open the inner lid.

Always make sure that the drum is

stationary before reaching into the

machine to remove washing.

Reaching into a moving drum is ex-

tremely dangerous.

^ Switch off the washing machine.

^ Open the fluff (drain) filter and drain

the water as described in "Cleaning

and care" - section "Cleaning fluff fil-

ter and pump".

To check water pressure

^ Place a bucket under the stopcock.

^ Open the stopcock fully.

If 5 litres of water flow into the bucket

within 15 seconds the water pressure is

correct.

^ Pull the emergency release cord

downwards until the machine outer

lid opens.

Download from Www.Somanuals.com. All Manuals Search And Download.

After sales service

Customer contact

Programme update function - PC

In the event of any faults which you

cannot remedy yourself please contact

The programme update function is de-

signed to enable a service technician to

update your machine’s electronics in

keeping with advances in technology.

– Your Miele dealer or

– Your nearest Miele Service Depart-

ment (see back cover for the ad-

dress).

The indicator light marked PC is used

as the interface for this programming.

Miele will provide information on

programme updates as and when such

developments become available.

When contacting the Service Depart-

ment, please quote the model and se-

rial number of your appliance, both of

which are shown on the data plate visi-

ble on the rear panel of the machine.

Appliance guarantee

The appliance is guaranteed for a pe-

riod of 1 year. See the guarantee book-

let supplied with the machine for further

details and complete and return the

registration card.

Please note that telephone calls may

be monitored and recorded to im-

prove our service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation surface

^ Remove the transit fitting (next page).

A concrete floor is the most suitable in-

stallation surface for a washing ma-

chine, being far less prone to vibration

during the spin cycle than wooden

floorboards or a carpeted surface.

The appliance must be level to ensure

safe and proper operation.

^ Unscrew the feet until the machine

stands level.

^ Hold the foot tight using a pipe

wrench.

Please note the following points:

^ The machine must be level and se-

curely positioned.

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

^ If installing on a wooden joist floor, we

recommend a plywood base (at least

60x45x3 cm). The base should span

several joists and be bolted to the

joists and not only to the floorboards.

Check for the presence of pipes and

cables first.

^ If possible, install the machine in a

corner, as this is usually the most sta-

ble part of the floor.

^ Tighten the counternut using a

screwdriver as indicated.

Levelling and adjusting

Lift the appliance from its packaging

base and move it to its installation site.

Please note:

^ Ensure that the machine feet and the

floor are dry to prevent the machine

from slipping during the spin cycle.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Removing the transit fitting

^ Plug the 4 large holes with the caps

supplied.

^ Unscrew the 4 outer screws marked

A completely.

The transit fitting together with

screws should be stored in a safe

place for future use. It must be re-fit-

ted if the machine is to be moved

again.

^ Unscrew the 4 screws marked B.

These screws must then be left on

the transit bars.

Re-fitting the transit fitting

To refit the transit fitting reverse the pro-

cedure described above.

^ Remove the transit bars.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connection to water supply

The machine is designed to operate

with a water flow pressure of 1 bar mini-

mum up to 10 bar maximum. The static

water pressure must not exceed 10 bar.

If it is higher than 10 bar it is essential

to fit a reducer valve.

The machine should be connected to a

mains water supply in accordance with

standard regulations. In Germany the

washing machine is not required to

have a non-return valve as it has been

designed to comply with the relevant

German DIN standard.

There is a minimum flow pressure of

1 bar pressure if, with the stopcock

opened fully, 5 litres of water flow into a

suitable container in 15 seconds.

Connection to a household water soft-

ener is not recommended.

The dirt filter in the open end of the inlet

hose must not be removed as it pro-

tects the water inlet valve.

Connection to the mains water supply

should incorporate a mains stopcock

with 3/4’’ thread. The stopcock should

be fitted by a qualified plumber.

The approx. 2.5 m long 3/8" pressure

hose should be connected to the stop-

cock via the 3/4" threaded union.

Please make sure the washer sits cor-

rectly in the union.

A longer hose of 4 metres in length is

available as an optional extra.

This pressure hose is not suitable for

connection to a hot water supply. The

connection point is subject to mains

water pressure. Turn on the stopcock

slowly and check for leaks.

If replacing the inlet hose only use a

hose able to withstand pressure of at

least 70 bar. This also applies to all

fixtures and fittings used. Miele origi-

nal parts are tested to this standard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connection to the drainage

system

Drain hose connection:

^ Direct into a sink: Hook the hose over

the edge and secure. Make sure that

the water can flow freely to avoid

flooding and to prevent water from

being sucked back into the machine.

The machine drains via a drain pump

with a delivery head of 1 metre.

The drain hose is 1.5 m long. It must

not be kinked as this restricts drainage.

The swivel elbow at the end of the hose

can be turned in either direction, or can

be detached if required, with a sharp

twist and pull.

^ Connected securely to a floor gully.

^ Connected securely to a standpipe.

^ Connected securely to a plastic drain

pipe with a rubber nipple. There is no

need to use a non-return valve.

If required, the drain hose can be ex-

tended to a length of 5 m. The neces-

sary parts can be purchased from the

Miele Spare Parts Department or your

Miele dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Electrical connection U.K.

Where it is necessary to change plugs,

if the colours of the wires in the mains

lead of this appliance do not corre-

spond with the coloured markings iden-

tifying the terminals of your plug, pro-

ceed as follows:

All electrical work should be carried out

only by a suitably qualified and compe-

tent person, in strict accordance with

national and local safety regulations.

The appliance is supplied with a mains

cable with moulded plug for connection

to a 230-240V mains supply. The volt-

age, rated load and fuse rating are

given on the data plate. Please ensure

these match the household mains sup-

ply.

The wire which is coloured green and

yellow must be connected to the termi-

nal in the plug which is marked with the

letter E or by the earth symbol z or

coloured green, or green and yellow.

The wire which is coloured blue must

be connected to the terminal in the

plug which is marked with the letter N

or coloured black.

Connection should be made via a fused

plug and suitable switched socket

which is easily accessible after installa-

tion. For extra safety it is advisable to

install a residual current device (RCD),

with a trip current of 30 mA (in accor-

dance with DIN VDE 0664, VDE 0100,

Section 739). Do not connect via an ex-

tension lead.

The wire which is coloured brown must

be connected to the terminal in the

plug which is marked with the letter L or

coloured red.

WARNING: THIS APPLIANCE MUST

BE EARTHED

Ensure power is not supplied to the ap-

pliance while installation work is being

carried out.

Important

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue

= neutral

= live

Brown

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Non-rewireable plugs BS 1363

If this machine is fitted with a

non-rewireable plug, the following infor-

mation applies:

If the socket outlets are not suitable for

the plug supplied with the product, it

must be cut off and an appropriate plug

fitted. The fuse carrier and fuse should

be removed from the old plug and dis-

posed of.

The plug cut from the flexible cord

should then be disposed of and on no

account be inserted into any socket

elsewhere in the house (electric shock

hazard).

The fuse cover must be refitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is em-

bossed in words on the base of the

plug (as applicable to the design of

plug fitted).

Replacement fuses should be ASTA ap-

proved to BS 1362 and have the cor-

rect rating. Replacement fuse covers

may be purchased from your local elec-

trical supplier or Service agent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Programme

(without any additional

options or programma-

ble functions)

Load

Consumption data

Water

Energy

Programme

time

COTTONS

95°C

5.0 kg

1.70 kWh

0.95 kWh

0.55 kWh

52 litres

1 h 54 mins

1 h 58 mins

60°C*

40°C

MINIMUM IRON

40°C

2.5 kg

1.0 kg

2.0 kg

1.0 kg

0.45 kWh

0.40 kWh

0.23 kWh

0.25 kWh

58 litres

75 litres

35 litres

39 litres

1 h 20 mins

58 mins

DELICATES

30°C

WOOLLENS

30°C

39 mins

Silk

30°C

36 mins

* EN 60456 test programme

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any additional func-

tions selected.

N.B. Consumption data obtained from a machine tested in Germany.

(Times would be reduced if the "Short" option was selected).

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Height

90 cm

Height with lid open

Width

139 cm

45 cm

Depth

60 cm

Weight

93 kg

Capacity

5 kg Dry laundry

See data plate

1 bar

Voltage

Rated load

Fuse rating

Water flow pressure min.

Static water pressure max.

Drain pump head height max.

Drain pump length max.

Test certificates awarded

10 bar

1 m

5 m

Radio/TV suppression, VDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/4602/V00

M.-Nr. 05 681 810

This paper consists of cellulose which has been bleached without the use of chlorine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miller Electric Welder ICE 100T User Manual
Miller Electric Welder OM 2241 User Manual
Moxa Technologies Switch EDS 518A Series User Manual
NordicTrack Treadmill NTL16950 User Manual
Nortel Networks Telephone Modular ICS 40 User Manual
Oki Printer ML 3390 User Manual
Ozark Trail Tent WMT 1960 User Manual
Palsonic Flat Panel Television PDP4290HD User Manual
Palsonic Home Theater System PMC 211 User Manual
Panasonic Stereo Equalizer SH MZ1200 User Manual