OWNER'S MANUAL
107CM CORDLESS REMOTE PLASMA TELEVISION & MONITOR
MODEL: PDP4290HD
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the product. To
ensure your safety and prolong the service life of your TV product, please read the following precautions carefully
before using the product.
1. Read these instructions --- All operating instructions must be read and understood before the product is operated.
2. Keep these instructions ---These safety and operating instructions must be kept in a safe place for future reference.
3. Head all warnings --- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions --- All operating instructions must be followed.
5. Attachments --- Only use attachments/accessories specified by the manufacturer. Do not use attachments not
recommended by the manufacturer. Use of improper attachments can result in accidents,
6. Power source --- This product is intended to be supplied by a listed power supply indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For
added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the cable system.
7. Power cord protection --- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading --- Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids --- Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason,
do not spill water or liquid on the product.
10. Servicing --- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11. Damage requiring service --- If any of the following conditions occurs, unplug the power cord from the AC outlet,
and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in anyway.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable
abnormality in the product indicates that the product needs servicing.
12. Replacement parts --- In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.
13. Safety checks --- Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting --- When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer. This is a safety feature.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions (Continued)
15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. Do not place the product on an unstable
trolley, stand, tripod or table. Placing the product on an unstable base can cause
the product to fall, resulting in serious personal injuries as well as damage to the
product. When mounting the product on a wall, be sure to follow the manufacturer's
instructions. Use only the mounting hardware recommended by the manufacturer.
16. Careful move --- When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven
floor surfaces can cause the product to fall from the trolley.
17. Lightning --- Unplug this apparatus during lightning storms or when unused for
long periods of time.
For added protection for this television equipment during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to the equipment due to
lightning and power-line surges.
18. Do not use this apparatus near water --- for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
19. Clean only with dry cloth --- Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
20. Ventilation --- Do not block any ventilation openings. Install in accordance with
the manufacturer instructions. The vents and other openings in the cabinet are
designed for ventilation. Do not cover or block these vents and openings since
insufficient ventilation can cause overheating and/or shorten the life of the product.
Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation;
do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer's instructions are followed.
21. Heat sources --- Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
22. Panel protection - The display panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other
objects. Be careful not to be injured by broken glass pieces in case the LCD panel
breaks.
23. Pixel defect - The dipslay panel is a very high technology product, giving you finely detailed pictures. Occasionally,
a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not
affect the performance of your product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notice
Do not use in hot and cold rooms (locations)
About Temperature
When the unit is used in rooms (locations) with low temperature, the picture may
leave trails or appear slightly delayed. This is not a malfunction, and the unit will
recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the screen to malfunction.
Storage temperature: 0°C to + 50°C.
Working temperature: 5°C to + 40°C;
The front of the display panel has been specially treated. Wipe the panel
surface gently using only a cleaning cloth or a soft, lint-free cloth.
Cleaning and
Maintenance
If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent
solution and then wring the cloth to remove excess liquid. Use this cloth to wipe the
surface of the display panel, then wipe it evenly with a dry cloth, of the same type,
until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects.
Furthermore, avoid contact with volatile substances such as insect sprays, solvents
and thinner, otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then
wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry
cloth.
Do not allow any detergent to come into direct contact with the surface of the Plasma
Display.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the cabinet surface may be adversely affected or the coating
may peel off. Furthermore, do not leave it for long periods in contact with articles
made from rubber or PVC.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Using the Remote Control
Use the remote control by pointing it towards the remote sensor window of the
set. Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
Do not expose the remote control to shock. In addition, do not expose the remote
control to liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the lighting or TV set, or operate the remote control closer
to the remote sensor window.
Installing the Batteries
If the remote control fails to operate the TV functions, replace the batteries in the remote control.
1Open the battery cover.
Insert two size-AAA batteries.
2
(Place the batteries with their terminals corresponding to the (+)
and (-) indications in the battery compartment.)
3
Replace the cover and slide in reverse until the lock snaps.
Precautions on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe with a cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations (Continued)
Antenna Connection
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
TV REAR
75-ohm coaxial cable (round cable)
RF
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.
The antenna cable should not be bundled with the power cord and the like.
Since your new TV has a digital receiver, please ensure you have the best possible antenna installation so to avoid picture defects
and disappointment, otherwise picture defects may occur.
Speaker Connection
Connect the speaker audio cable
to the external speaker output
jack on the unit matching the "+"
and "-"ends of the cable.
Unplug the plasma display and all connected components before connecting the Speakers.
The illustration may be different depending on model.
Power Connection
Insert the AC plug into a conveniently located AC outlet.
This product should be operated only from the type of power source indicated on the marking label.
Always unplug the AC cord from power outlet when not using for a long period of time.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Main Unit (front view)
POWER SWITCH
6
1
2
4
5
3
1. INDICATOR
2. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
Press this button to access the MENU main page.
3. MENU
4. VOLUME
Press the VOL or VOL button to directly increase or decrease the sound volume level.
In menu operations, these buttons serve as right/left buttons.
5. CHANNEL
Press these two buttons to directly change the TV channel.
In menu operations, these buttons serve as up/down buttons.
6. REMOTE SENSOR
Functions of VOL+/-, CH+/-, MENU and POWER
are also provided to the remote control. This operation manual
provides a description based on operating functions with the remote control.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (Continued)
Main Unit (rear view)
9
1
2
3
4
8
13
14
5
6
7
10
11
12
1
2
3
4
Speaker output jacks
RS-232 terminal: For service only. The user should not use this terminal.
S/PDIF digital audio output (optical): Connects to the digital audio input of a digital audio component.
HDMI input: HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video
interface between this TV and any HDMI-equipped audio/video component, such as a set-top box and DVD player.
HDMI supports enhanced, or high-definition video, plus two-channel digital audio.
5
6
D-SUB PIC (Video) /AUDIO input: Connects to a PC or other Analog RGB devices such as Video Conferencing.
COMPONENT INPUT 1: Connects to your DVD player.
Component video provides better picture quality than the S-VIDEO or the composite video connections.
7
8
9
COMPONENT INPUT 2: Connects to your DVD player.
Component video provides better picture quality than the S-VIDEO or the composite video connections.
AV OUTPUT: Connects to your VCR to record programs as desired or connects to your audio amplifier.
Only analog TV programs, AV 1 and AV 2 input sources can be output through the AV output jacks.
Headphones jack: Connects to your headphones. If your headphones do not match the jack, use a suitable plug
adaptor (not supplied).
10 S-VIDEO input: Connects to the S-VIDEO output jack of your VCR or other video equipment that has S-VIDEO.
S-VIDEO provides better picture quality than the composite video connection.
11 AV INPUT 1: Connects to the composite video and audio output jacks on your VCR or other video device.
12 AV INPUT 2: Connects to the composite video and audio output jacks on your VCR or other video device.
13 RF input: Connects to your cable system or outdoor antenna
14 AC power input jack: Connects to AC power cord..
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (Continued)
Remote Control Unit
1 POWER
: Switches the TV power on or Standby
2 TV/Radio: Switches between TV and Radio mode. (DTV only).
3 EPG: Displays the Electronic Program Guide. (DTV only)
4 FAV +/-: Selects the favourite channel.
5 FAV.LIST: Displays the favourite channel list.
6 0-9 number buttons: Press to enter channel numbers or
input password.
7 ZOOM: Selects the screen size. (For analog program only)
8 MENU: Displays the main menu screen.
9
OK: Press the arrows to navigate through the
menus or adjust an item. Press OK to confirm a selection or
enter a sub-menu.
10 MUTE: Mutes the sound.
11 VOL+/-: Increases or decreases the volume.
12 INFO: Displays the information banner.
13 SOUND: Selects sound mode.
14 STEREO: Selects Stereo or Mono sound.
15 AUDIO: Selects audio track. (DTV only)
16 SLEEP: Sets the sleep timer.
17 RECALL: Returns to the previous channel.
18 EXIT: Exits the menu screen.
19 SOURCE: Displays input source menu.
20 CH
: Changes channel up and down.
21 LIST: Displays the channel list.
22 PICTURE: Selects picture mode.
Below is teletext control buttons:
Coloured buttons (RED/GREEN/YELLOW/BLUE): Direct
access to the coloured items or corresponding pages.
(Teletext)
23
24
TTX: Used to call teletext, change to transparent mode and
then exit. (Teletext)
Subtitle: Displays the subtitle. (DTV only)
Size: Press this button several times to display the upper, then
the lower part of the screen and then return to the normal size
teletext page. (Teletext)
25
26
Reveal: To reveal or hide the concealed information. (Teletext)
Hold: To stop or resume sub-page acquisition. (Teletext)
Update: Press the button to view the updated teletext page.
(Teletext)
27
28
29
In teletext mode, EPG button is used to display the index page.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into
their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
Connecting digital optical audio
TV REAR
For a full Home Theatre sound experience, you must connect your Hi-Fi or
Audio processor to the S/PDIF OUT(Optical) terminal on the TV rear.
The S/PDIF OUT terminal only can output digital TV program's audio.
Optical cable
S/PDIF IN
(Optical)
Connecting a VCR
S-VIDEO
cable
AV cable
VCR
TV REAR
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note: For better video, you can use the S-Video terminal if your source supports it.
To play VCR
1. Turn on your TV then press SOURCE button. The SOURCE menu opens.
2. Press or to select AV 1 (or S-Video if using S-VIDEO terminal), then press OK to confirm.
3. Turn on your VCR, insert a videotape and press the Play button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting a Camcorder
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your TV, then press SOURCE button. The SOURCE menu opens.
2. Press or to select AV 2, then press OK to confirm.
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
4. Insert the tape into the camcorder and press Play button.
The operations of the camcorder may be different and is dependant on your model. Please read the user manual of your
camcorder to confirm operation.
Connecting a HDMI device
TV REAR
How to connect a device using HDMI Connection:
Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device.
To play from the device using HDMI:
1. Turn on your TV, then press SOURCE button. The SOURCE menu opens.
2. Press or
to select HDMI, then press OK to confirm.
3. Turn on your device and set it to the correct mode. See the device's user guide for more information.
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio
cable to the D-SUB AUDIO IN jack on the TV rear.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting a Component Video
TV REAR
Device with
component video
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
To connect a device using component video:
Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr
output jacks on the device.
Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device.
To play component video from an external device:
1. Turn on your TV then press SOURCE button. The SOURCE menu opens.
2. Press or to select YPbPr 1 (or YPbPr 2), then press OK to confirm.
3. Turn on your external device and set it to the correct mode. See the device's user guide for more information.
Connecting a Computer
To audio output jack
Audio cable
(stereo mini plugs)
How to connect:
Connect a D-sub cable between the D-SUB jack on the computer and the D-SUB input jack on the unit.
Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit.
To play video from a computer
1. Turn on your TV then press SOURCE button. The SOURCE menu opens.
2. Press or to select D-Sub, then press OK to confirm.
3. Turn on your computer, and adjust the display properties as required.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting a VCR (for Recording)
VCR for Recording
TV REAR
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
AV cable
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
To record program
1. Turn on your TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
Only analog TV programs, AV1 and AV 2 input sources can be output through the AV output jacks.
Connecting Headphones
Insert the plug of the headphone into the TV's Headphone jack.
When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage
may result.
TV REAR
Headphones
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Turning On/Off the Power
Turning On
Insert the power cord into the wall outlet.
Press the Power Switch on the unit, then press the POWER
button on the unit or on the remote control.
The unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, press the POWER button on the unit or on the remote control to turn off the unit, and put the
unit in standby mode. To cut off the power completely, press the Power Switch.
Main Menu Overview
List of main menus to help you with operations
VIDEO Menu (TV Mode)
SETUP Menu (TV Mode)
AUDIO Menu (TV Mode)
T
T
T
Sound Mode
Custom
Aspect Ratio
Wide
Auto Install
94%
79%
50%
79%
94%
50
100Hz
500Hz
1KHz
Picture Mode
Contrast
Custom
Manual Install
Channel List
Favorite List
Manual Adjust
77%
50%
50%
50%
50%
50%
Brightness
Color
5KHz
10KHz
Tint
Balance
Sharpness
Advanced
SPDIF Mode
HP Volume
Auto
19%
DISPLAY Menu (D-Sub & Component Mode)
RATE Menu (TV Mode)
SYSTEM Menu (TV Mode)
T
T
T
42%
Source
TV
Rating
H.Position
48%
Channel Lock
Password
V.Position
State
NSW ACT
Phase
60%
Parental Lock
Auto Adjust
DISPLAY menu can only be used in D-Sub and Component mode.
Menu items that are not selectable are greyed out.
The illustrations and on-screen displays in this manual are for explanation purposes (some are enlarged, others cropped)
and may vary slightly from the actual ones.
To navigate through the OSD main menu
With the power on, press MENU and the main menu screen displays.
1
2
Press the
to select menu. Press to access the menu.
Within the menu, press
selection or enter a sub-menu.
,
, , to navigate through the options or adjust an option. Press OK to confirm a
3
4
Press MENU or EXIT to return to the previous level menu. To exit the menu system, press MENU or EXIT
repeatedly. Or you may wait for some seconds and the on-screen menu will disappear from the screen automatically.
To clearly introduce the menu operations, this operation manual provides a description based on operation with the
remote control.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation (Continued)
Selecting the Input Signal Source
Source
1. TV
2. AV1
3. AV2
Press SOURCE button.
1
4. S-Video
5. YPbPr1
6. YPbPr2
7. D-Sub
8. HDMI
Press or to select the input source.
2
You can quickly go to first item (TV) and last item (HDMI) by pressing or button.
Options include:
TV - Watch the TV signal.
AV1 - Watch the signal from the AV1 input terminals.
AV2 - Watch the signal from the AV2 input terminals.
S-Video - Watch the signal from the S-VIDEO input terminal.
YPbPr1 - Watch the signal from the COMPONENT input 1 terminals.
YPbPr2 - Watch the signal from the COMPONENT input 2 terminals.
D-Sub - Watch the signal from the D-SUB jack.
OK
Select
First/Last
T
HDMI - Watch the signal from the HDMI input jack.
Source
State
TV
NSW ACT
Press OK or SOURCE button to confirm the selection.
3
You can also make use of OSD main menu (SYSTEM menu) to select the input source.
Displaying the Information Banner
Press the INFO button to display the information banner. The information banner displays current status information such as
the channel number and signal source.
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an
example banner in DTV mode.
In DTV mode, the information banner may contain:
Channel number and name.
Current time.
Current program name, start and end playtimes.
Next program name and start and end playtimes.
TV or Radio.
Audio mode (stereo or mono), audio track.
Signal strength for current channel.
Signal resolution.
Program rating, etc.
The above OSD is only served as an example. and it is in DTV mode.
Information banner content varies, depending on the broadcaster and your settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorizing the Channels
Your TV can memorize and store all of the available programs (including TV and Radio programs). After the available programs
are memorized, use Channel up/down button to scan through the available stations
T
Auto Searching for Programs
Auto Install
Manual Install
You can complete an auto search to search for all programs (including radio and
Channel List
Favorite List
TV stations) available to your television. The television then stores them in
memory on the program list.
Manual Adjust
Press MENU and the main menu screen displays.
1
Caution
2
Press
to select SETUP menu, press to access the menu.
All program will be lost!
Do you want to continue?
3
Highlight Auto Install item, and then press OK. Now a confirmation
box opens up, use to select Yes to confirm and the TV
Yes
No
automatically searches for all available TV/DTV program and radio
program, or select No to cancel the operation.
Full Search
Search Type:
Channel 28
17%
Others 0
TV
1
Radio 0
20 ABC HDTV
No Items
No Items
You can press EXIT button to stop the search.
Manual Searching for Programs
T
If desired programs can not be searched by Auto Install, you can make use of
Manual Install to search programs manually.
Auto Install
Manual Install
Channel List
Favorite List
Manual Adjust
1
2
Use channel select buttons to select a channel position in which you
want to store.
Navigate to SETUP menu and press or to select Manual
Install and then press OK.
Waiting .......
471.338
MHz
Now a process screen opens up, press or to search program
upward or downward. When a program is located, the search stops,
and this program is stored in the specified channel position.
3
Go
Quit
Manual Install is only used to search analog TV program.
You can press EXIT button to stop the search.
T
Manual Fine Tuning
Fine tuning is not necessary under normal conditions. However, in area of
inferior broadcast conditions where adjustment is necessary for a better
picture and sound, use Fine tuning.
Auto Install
Manual Install
Channel List
Favorite List
Manual Adjust
Navigate to SETUP menu and press or to select Manual
Adjust, and then press OK to access the sub-menu.
1
Highlight Program, press or to select a program which you
want to perform fine tune.
2
22
Program
Fine Tune
Label
0
3
Press to select Fine Tune, and then press and hold or to fine
tune until the best possible picture and sound are obtained.
(Press to input character, 4 letters max)
Fine Tune is only for analog TV program.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorizing the Channels (Continued)
Labelling Channel
T
If a channel is not already labelled, you can label the channel so you know what
channel you are watching.
Auto Install
Manual Install
Channel List
Favorite List
Manual Adjust
1
Navigate to SETUP menu and press or to select Manual Adjust,
and then press OK to access the sub-menu.
Highlight Program, press or to select a program which you want
to label.
2
ABC
Press or to select Label, and then press YELLOW button to open
3
the label editing screen. Use , ,
,
to navigate among characters
A
B
H
N
T
Z
&
C
I
D
J
E
K
Q
W
#
F
L
22
Program
Fine Tune
Label
G
M
S
Y
^
and then press OK to select it. To delete, press RED button; to switch
between uppercase and lowercase, press YELLOW button; to save,
press GREEN button.
O
U
!
P
V
@
-
R
X
$
(Press to input character 4 letter
The maximum length of label is 4 characters.
*
_
+
Delete
Caps Lock
Save
The labels of digital broadcasting channels are automatically assigned and thus can not be assigned by users.
Channel List Management
After auto install, a default channel list is created. You can make use of Channel List to select program, to skip unnecessary
channels, to sort programs, and to create a favourite program list.
To skip unnecessary channels
After auto install, you can skip unnecessary channels so that only the channels you want to watch are selected with Channel
up/down buttons.
Channels List - TV
1. TV 2
2. TV 3
1
Press LIST button to call up Channels List.
Or you may navigate to SETUP menu and press
or to select Channel List,
7. 7 Digital
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
8. TV 7
and then press OK to access the sub-menu.
2
3
Press or to select your unwanted channel, press GREEN button and a skip
symbol appears alongside the selected channel in the list, which means this
channel will be skipped.
22. TV 9
29 TV 10
If you want to skip more channels, repeat the above steps to set more skip
symbols to more channels.
Press EXIT to quit the list. Now when you press Channel up/down buttons,
these unwanted channels will be skipped.
Favorite
Skip
Move Up
Move Down
To restore a skipped channel, enter into the channel list, use or to select the channel, then press GREEN button and
the skip symbol will disappear.
If the channel list has more than one page, you may press or to scroll the page upward or downward.
Channels List - TV
To sort channels
1. TV 2
2. TV 3
7. 7 Digital
8. TV 7
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
22. TV 9
This function allows you to arrange the channel order.
1
Select the channel you want to move in the channel list.
Press BLUE or YELLOW button to move the channel upward or
downward to a desired new position.
2
29 TV 10
Repeat the above steps for each channel you wish to move.
3
Favorite
Skip
Move Down
Move Up
If the channel list has more than one page, you may press or to scroll the page upward or downward.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorising the Channels (Continued)
Favourite Channel Setup
You can make use of channel list to set up your favourite channels.
Channels List - TV
1. TV 2
2. TV 3
7. 7 Digital
8. TV 7
In the channel list, press or to select your favourite program, press RED
button and a favourite symbol appears alongside the selected channel.
1
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
22. TV 9
Repeat the above steps to set more favourite channels.
2
29 TV 10
3
Now a favourite channel list has been created. You can press FAV.LIST button to
call up the favourite list, or make use of OSD main menu (SETUP menu) to display
the favourite list.
Favorite
Skip
Move Up
Move Down
If you want to cancel favourite setting, select the program in the channel list, press RED button and the favourite symbol will
disappear.
If the channel list has more than one page, you may press or to scroll the page upward or downward.
Favourite List Management
Channels List - TV
After favourite list is created, you can arrange the favourite program order.
2. TV 3
8. TV 7
22. TV 9
29 TV 10
To sort favourite channels
This function allows you to arrange the favourite program order.
1
2
Select the channel you want to move in the Favourite List.
Move Up
Press BLUE or YELLOW button to move the channel upward or downward to
a desired new position.
Move Down
3
Repeat the above steps for each channel you wish to move.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel and Program Selection
Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable
of receiving both traditional analog channels and digital channels.
When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to
switch. To return to TV program, press TV/Radio button again. (When watching analog TV program, the TV/Radio
button does not work.)
The TV allows channel and program selection in the following ways:
Method 1 - Using CH or CH
Press the CH or CH to cycle among all available channels. The skipped channels can not be selected by Channel up/down
button.
Method 2 - Using RECALL button
Press RECALL to switch to the previously tuned channel.
Press RECALL again to switch back to the currently tuned channel.
This button will not work if no channel has been changed after TV is turned on.
Method 3 - Using 0 - 9 and OK button
Press the 0 - 9 number buttons to input a channel number, then wait for some seconds or press OK to go directly to that
channel.
When both analog and digital channels have same channel number, input the channel number first time and the TV will
tune to the digital channel. While the digital program is displayed, input the same channel number a second time and the TV will
tune to the analog channel.
When selecting, the TV will indicate the channel through the information banner.
Channels List - TV
1. TV 2
When in Radio mode, you can press TV/Radio button to switch to TV mode.
2. TV 3
If you input one-digit or two-digit channel number, you can press OK to go directly to the
7. 7 Digital
channel without waiting.
8. TV 7
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
22. TV 9
Method 4 Using channel list
Press LIST button to display the channel list (or you can make use of OSD main menu -
SETUP menu to open the channel list). Use or to select a channel and then press OK.
29 TV 10
Favorite
Skip
If the channel list has more than one page, you may press or to scroll the page upward or
downward.
Move Up
Move Down
Method 5 - Using favourite channel list
Channels List - TV
2. TV 3
8. TV 7
22. TV 9
29 TV 10
After you have created the favourite channel list, you can press FAV.LIST button to display
the favourite channel list (or you can make use of OSD main menu - SETUP menu to open
the favourite channel list). Use or to select a channel and then press OK.
You can directly press FAV+/- button to cycle among the favourite channels.
Move Up
Move Down
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustment
Customising the Picture
T
1
Press MENU and the main menu screen displays.
Aspect Ratio
Wide
Custom
Picture Mode
Contrast
77%
50%
50%
50%
50%
50%
2
3
Press
to select VIDEO menu, press to access the menu.
Brightness
Color
Tint
Within the menu, press
or adjust an option. Press OK to confirm a selection or enter a sub-
menu
,
,
,
to navigate through the options
Sharpness
Advanced
.
Option
Aspect Ratio
Description
You can select the aspect ratio (display proportions) according to your video signal type or
personal preference. You can select from Wide, Zoom and Normal.
Wide: Displays a full-screen (16:9) picture. (Works only in 4:3 analog programs)
Zoom: Magnifies the picture while maintaining correct screen proportions.
Normal: Displays a 4:3 picture. (Works only in analog programs)
Note: You can press the ZOOM button repeatedly to select a desired aspect ratio.
Picture Mode Selects a desired picture mode. You can select from Standard, Vivid, Mild and Custom.
Standard: Select for a normal picture.
Vivid: Select for a bright and vivid picture.
Mild: Select for a finely detailed picture.
Custom: The picture quality you set.
Note: To quickly change the picture mode, press the PICTURE button repeatedly.
Contrast
Brightness
Colour
Adjusts image contrast.
Adjusts screen brightness for easier viewing of dark picture such as night scenes and black hair.
Adjusts colour saturation.
Adjusts tint for image.
Tints
Sharpness
Adjusts image sharpness and displays a sharp image.
Selects one of three automatic colour adjustments. Sets to Warm to enhance hotter colours
such as red, or set to Cool to see less intense colours with more blue. You can select from
Warm, Cool and Normal.
Advanced
(Colour Temperature)
Tint is only for NTSC system.
Menu item that is not selectable is greyed out.
Select "Advanced" and then press OK to set "Colour Temperature ".
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments
Adjusting the Volume
Using the volume buttons (VOL+ and VOL- )
Press the VOL+ or VOL- to increase or decrease the volume.
Using the MUTE
Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again.
Customizing the Sound
T
Custom
Sound Mode
100Hz
1
2
3
Press MENU and the main menu screen displays.
94%
79%
50%
79%
94%
50
500Hz
1KHz
Press
to select AUDIO menu, press to access the menu.
5KHz
10KHz
Balance
Auto
SPDIF Mode
HP Volume
Within the menu, press or to navigate through the options,
press or to adjust an option.
19%
Option
Sound Mode Select
Description
Selects a desired sound mode. You can select from Music, Movie, Speech and Custom.
Music: Select for a music program.
Movie: Select for a movie program.
Speech: Select for a speech or conversation program.
Custom: The sound quality you set.
Note: To quickly change the audio mode, press the SOUND button repeatedly.
Five-Band Equalizer
(100Hz, 500Hz, 1KHz,
5 KHz, 10KHz)
You can adjust the sound quality to your preference by adjusting the Five-band Equalizer.
SPDIF Mode
Select the digital audio output mode for S/PDIF. You can select from Auto, AC3, MPEG.
Auto: Output audio signal as its original format. If both AC3 and MPEG are available, AC3 is
auto selected.
AC3: Output audio signal by AC3 form (if available).
MPEG: Output audio signal by MPEG form (if available).
Note: To select Auto is recommended.
Adjust headphones volume.
HP Volume
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments (Continued)
Stereo/Bilingual Selection (for analog channels)
You can quickly select sound multiplex mode by using the STEREO button on the remote control.
NICAM Broadcast Selection
This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM
broadcasting, this TV set receives NICAM system stereo, bilingual, and monaural broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the STEREO button to select STEREO or MONO.
When MONO is selected, the TV sound is output monaurally.
Bilingual
When the TV set is receiving a bilingual program, press the STEREO button to select Dual A or Dual B.
IGR (German stereo system) Broadcasts
This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting,
this TV set receives IGR system stereo and bilingual broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the STEREO button to select STEREO or MONO.
When MONO is selected, the TV sound is output monaurally.
Bilingual
When the TV set is receiving bilingual program, press the STEREO button to select Dual A or Dual B.
(for digital channels)
Stereo/Mono Selection
When watching digital programs, you can select stereo or mono sound to match the broadcast signal or your
home entertainment stereo system by making use of STEREO button on the remote control.
Audio Track Selection (for digital channels)
The digital TV transmission system is capable of simultaneous transmission of many audio tracks (for example,
simultaneous translations of the program into foreign languages, or different commentators for sport events). You
can press AUDIO button to select the audio track.
Note
The availability of these additional "multi-tracks " depends upon the broadcaster.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating and Lock Setup
Password Setup
The Password setup sub-menu is used to set a new system password or to change an existing system password. By default, the
system password is 0000 and you may change it. To access Rating control, to lock or unlock channels, to view locked channels,
or to set up Parent Lock, the system password is required.
To create a new password
T
Press MENU and the main menu screen displays.
1
Rating
Press
to select RATE menu, press
to access the menu.
Channel Lock
Password
Press or to select Password item, and then press OK to access
its sub-menu.
2
3
4
5
Parental Lock
Highlight Old Password item, use the number buttons to input the
old password (the default password is 0000).
Use or to highlight New Password item, use the number buttons to
input a new password (4- digit).
Old Password
New Password
Confirm New Password
Use or to highlight Confirm New Password item, use the number
buttons to input the same password a second time and then press OK to
confirm.
Note: Password must be 4 digits
Now the new password has been created successfully.
If you forget your password, you may use the super password (2580) to overwrite the old password, and the system will auto
reset the password to 0000.
Rating Setup
T
Rating Control blocks programs according to their classification so that
children can not view certain programs. Parents can set the ratings limit in the
Rating control sub-menu.
Rating
ChanneLock
Pass
Input 4 digits Password:
Parenta
1
Navigate to the RATE menu and use or to highlight Rating
item, press OK to access.
Now a password is required to input. Use number buttons to input
the password and then press OK.
2
3
G
(General Audiences): Content not
offensive to most viewers.
Now the Rating control screen opens.
Use or to select your desired
rating, and press OK to either block or
unblock the rating.
PG (Parental Guidance Suggested):
Content is such that parents may not want
their children to view the program.
Block All
Block G & above
Block PG & above
Block M & above
Block MA & above
Block AV & above
Block R & above
No Block
M
(Mature Audience): Suitable for mature
audience.
Use the "Block All" setting to completely
block all viewing. The menu can still be
accessed to unblock all programs.
MA (Mature Adult Audience): May contain
mature themes, profane language, graphic
violence, and sexual situations.
AV (Adult Audience): Strong violence.
R
(Restricted viewing): Not for children
under age 17. Strong elements of sex
and/or violence.
4
Press EXIT one or more times to quit
the menu and return to your program.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating and Lock Setup (Continued)
Channel Lock Setup
T
Rating
The Channel Lock function blocks the viewing of any channel for which the
channel lock has been set.
Channel Lock
Password
Parental Lock
Navigate to the RATE menu and use or to highlight Channel
1
Lock item, press OK to access.
2
Now a password is required to input. Use number buttons to input
the password and then press OK.
Channel Lock - TV
3
Now the Channel Lock screen opens. Use or to select the
channel you want to lock, then press RED button to set lock to the
channel. A lock symbol appears alongside the locked channel.
1. TV 2
2. TV 3
7. 7 Digital
8. TV 7
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
22. TV 9
4
5
Repeat the above steps for each program you wish to lock.
Press EXIT one or more times to quit the menu. The Channel Lock
comes into effect for the Locked channel.
29. TV 10
Lock/Unlock
Enter Pin Code
To view a locked channel, just input the password.
To cancel channel lock, enter into the RATE menu, use password to enter
into the Channel Lock screen, use RED button to unlock the channel,
and the lock symbol will disappear.
Pin Code
Confirm
Cancel
Up/Down - Change Channel
Parental Lock Setup
Making use of Parent Lock you can protect some TV settings from being
accidentally changed. After Parent Lock is set to ON, the Auto Install, Manual
Install, and Manual Adjust can not be performed by the user without the
password.
T
Rating
Channel Lock
Password
Parental Lock
Navigate to the RATE menu and use or to highlight Parent
Lock item, press OK to access.
1
Now a password is required to input. Use number buttons to input
the password and then press OK.
2
3
Parent Setting
Parent LOCK
Now the Parent Setting screen opens. Use or to turn on or
turn off the Parent Lock.
On
Once you turn on Parent Lock, the Auto Install, Manual Install and
Manual Adjust can not be done by the user without the password.
To cancel, use password to enter into Parent Setting screen and set
Parent Lock to OFF.
Quit
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Zone, EPG & Sleep Timer
Time Zone Selection
To obtain local time, you should first set local time zone, and it depends on
your local station whether has broadcast time zone information.
T
Source
State
TV
1
Press MENU and the main menu screen displays.
NSW ACT
2
Press
to select SYSTEM menu, press to access the menu.
3
Press or to select State item, and then press
appropriate time zone.
to select the
EPG
The EPG displays information about current and upcoming programs.
Operation
Press the EPG button to open the EPG (Electronic
Program Guide). An example of an EPG window is
given on the right.
1
08.18,2006
Channel Schedule
15:00-15:59 BLUE HEELERS
Tom thinks he's found a suitable creche for his grandson Sam - until
rumours of baby bashing start to circulate.
2
In the EPG window, several channels' current and
upcoming program's information will be displayed.
SERVICE NAME 15:00
15:30
16:00
16:30
BLUE HEELERS
BLUE HEELERS
BLUE HEELERS
BLUE HEELERS
BLUE HEELERS
7 Digital
PASSIONS
You can use
,
,
,
buttons to navigate among
the channels and program events. On the upper
window detailed information (if available) about
the current highlighted program will be displayed.
7 HD Digital
PASSIONS
PASSIONS
PASSIONS
PASSIONS
7 Digita1
7 Digitai2
7 Digital3
3
To clear the EPG window, press OK or EXIT
button.
Program Event
OK: Return
Channel
The EPG will only work when you are receiving digital channels.
To enable EPG to work properly, it is suggested to set the appropriate time zone.
Setting the Sleep Timer
The sleep timer lets you select the amount of time before your TV turns off automatically.
To set the sleep timer, press the SLEEP button repeatedly to select the amount of time (30 minutes, 1 hour, and 2 hours
can be selected). To turn off the timer, select Sleep Off.
Power Off
System will Power Off in
After you have set sleep timer, when the last 30 seconds have come up, the Power
20 seconds.
Off screen will appear to remind you after how many seconds the TV will power
off. You can press any button to quit.
Press any key to Quit
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext & Subtitle
Teletext
What Is Teletext?
Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
News, weather and sports information, stock exchange prices and programme previews are among the many services
available.
To Turn On/Off Teletext
Select a TV channel providing the Teletext program
Press TTX button to display the teletext.
1
Press TTX button again, the text will be superimposed on a TV picture with
transparent background. (Mix mode)
2
Press TTX button once more to exit the teletext.
3
Teletext control button list
TTX button
Used to call teletext, change to transparent mode and then exit.
EPG button
In teletext mode, press this button to display the index page.
button
Used to scroll page upward or downward.
0-9 button
Directly select any page by using 0 - 9.
Coloured buttons (RED/GREEN/YELLOW/BLUE)
Coloured areas are displayed at the bottom of the screen. The 4 coloured
buttons are used to access the items or corresponding pages.
Hold button
Certain pages contain sub-pages which are automatically displayed
successively. This button is used to stop or resume sub-page acquisition.
Reveal button
Press the button to reveal the concealed information such as games
solutions. Press the button again to hide the information.
Size button
Press this button several times to display the upper, then the lower part of
the screen and then return to the normal size teletext page.
Update button
Press the button to view the updated teletext page.
Subtitle
1
If the program has subtitle, simply press Subtitle button to display subtitle.
Press Subtitle again to cancel the subtitle.
2
The subtitle function only works in digital channels.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Adjustment for D-Sub (PC) Mode/Component Mode
Before adjusting the image, make sure that you select the correct source (D-Sub or YPbPr).
To adjust the image
T
42%
48%
60%
H.Position
Press MENU and the main menu screen displays.
1
V.Position
Phase
Auto Adjust
Press
to select DISPLAY menu, press to access the menu.
2
3
Within the menu, press
or adjust an option, press OK to confirm a selection and activate it.
,
,
,
to navigate through the options
Option
Description
H.Position
Moves the image on the screen left or right.
Moves the image on the screen up or down.
Improves the focusing of a stable image.
V Position
Phase
Selects and activates to start auto adjustment. The television automatically adjusts the image
settings, such as position and phase.
Auto Adjust
(PC mode only)
Only in D-Sub and Component mode, the DISPLAY menu can be accessed.
Only in D-Sub mode, the Auto Adjust can be activated.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If after reading these operating instructions, you have additional questions related to the use of your television, please call the
services centre in your local area.
Before calling service, please check the symptoms and follow suggested solutions.
Remote Control
Problem
Possible Solutions
The batteries could be weak. Replace the batteries.
Check the orientation of the batteries.
Remote control does not operate
Make sure the power cord is plugged in.
Video and Audio
Problem
Possible Solutions
No picture (screen not lit),
No sound
Make sure the power cord is plugged in.
Press POWER on the TV or on the remote control.
Try another channel; it could be station trouble.
Dark, poor or no picture
(Screen lit), good sound
Select a proper picture mode.
Adjust the brightness in the video setting.
Check the antenna connections.
•
•
•
No colour/dark picture/colour
is not correct
Adjust the colour saturation in the video setting.
Only snow and noise appear
on the screen
Check the antenna connections.
Try another channel; it could be station trouble.
Adjust the antenna.
Dotted lines or stripes
Move the TV away from noise sources such as cars, neon signs, or hair dryers.
Double images
Using a highly directional outdoor antenna or a cable may solve the problem.
Good picture, no sound
The sound may be muted. Press MUTE again to cancel.
Make sure the stereo mode is set to stereo or mono.
Audio noise
Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Move the infrared
communication equipment away from the TV until the noise is eliminated.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
General
Problem
Possible Solutions
These channels may be locked. Please unlock them (see <Channel Lock Setup>
section).
One or some channels can't be
displayed
These channels may be set skipped in the channel list. You may set it to not skipped
or select them with 0-9 number buttons.
Lost password
You may use the super password (2580)to overwrite the old password, and the
system will auto reset the password to 0000.
If a setting option appears in gray, this indicates that the settings option is
unavailable in current input mode.
Some items can't be accessed
TV cabinet creaks
When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
Some settings (such as volume
setting, etc.) may not be memorized
when the TV loses power or you
press main Power Switch to turn off
the TV
After you make some settings or adjustments, and within 10 seconds you turn off the
TV by main Power Switch or the TV loses power, then the settings you have made
within 10 seconds may not be memorized. But you can use Power button to switch
the TV to standby mode before cutting off the power, then the settings can be
memorized.
Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
and turn on the unit again.
Control buttons do not operate
Plasma Display panel
Problem
Possible Solutions
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Some parts of the screen do not
light up.
Do not allow a still picture to be displayed for an extended period, as this can cause
a permanent after-image to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and
images displayed in 4:3 mode.
After-images appear
Note
The permanent after-image on the Plasma Display resulting from fixed image use is
not: an operating defect.
This product is not designed to display fixed images for extended periods of time.
Snapping sounds may be heard from
the display unit.
This sound is produced when the cabinet expands or contracts due to variations in
temperature and is not a malfunction.
If your problem is not solved, turn your unit off and then on again.
Cautions:
Never attempt to repair a defective TV yourself.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PDP TV
Type:
107cm
Display Size diagonal:
Power Supply:
Power Consumption:
Dimensions (mm):
Unit Weight (kg):
TV System:
AC I00-240V 50/60Hz
350W
1246(W) x 753(H) x 263(D)
39
Analogue: CCIR (PAL-B/G, NTSC (AV))
Digital: DVB-T (2K/8K OFDM)
DTV Technical Data
Channel Coverage
Channel Bandwidth
VHF (174MHz~230MHz), UHF (519MHz~820MHz)
7MHz
2K.8K
FFT Mode
Constellation
QPSK, I6QAM, 64QAM
Guard Interval Modes
Automatic FEC selection
Input Impedance
1 /4, 1/8, 1/16, 1/32 active symbol duration
1/2, 2/3, 3/4, 5/6, 7/8
Supported Format
Horizontal
frequency (KHz)
Vertical
frequency (Hz)
Mode
Format
640X480
640X480
640X480
640X480
720X400
60 Hz
75 Hz
72 Hz
85 Hz
70 Hz
31.5 KHz
37.5 KHz
37.9 KHz
43.3 KHz
31.5 KHz
VGA
800X600
800X600
800X600
800X600
800X600
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
53.7 KHz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
SVGA
XGA
1024X768
1024X768
1024X768
48.4 KHz
56.5 KHz
60 KHz
60 Hz
70 Hz
75 Hz
Design and specifications are subject to change without notice.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
5944030070
YG Ver. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|