Miele Refrigerator KF 1801 Vi User Manual

Operating and Installation  
Instructions  
Fridge-Freezer Combination  
KF 1801 Vi  
KF 1811 Vi  
KF 1901 Vi  
KF 1911 Vi  
en - US, CA  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
M.-Nr. 09 169 250  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Water filter change indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Exchanging the water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Confirming the filter change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Using an external water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Lead free certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Stainless steel panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Custom door panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Adjusting the door opening angle (optional accessory) . . . . . . . . . . . . . . . . . . . . 55  
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
RemoteVision module installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Preparing the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Sliding the appliance into the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Attaching the appliance to the installation niche. . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Preparing the custom door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Attaching and aligning the custom door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
RemoteVision (optional accessory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
When using the appliance, follow  
basic safety precautions, including  
the following:  
Electrical Safety  
Before installation, make sure that  
~
the voltage and frequency listed on the  
data plate correspond with the  
Read all instructions before  
installation and use to prevent  
accidents and machine damage.  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Before installation or service,  
~
This appliance is intended for  
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
residential use only. Use only as  
described in this Operating manual.  
Only use the appliance for its  
intended purpose.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance  
(e.g., danger of overheating).  
This appliance complies with current  
safety requirements. Improper use  
of the appliance can lead to  
personal injury and material  
damage.  
Be certain your appliance is  
~
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Only connect power to the  
~
appliance when all installation and  
plumbing work is complete.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
In refrigerators with an automatic ice  
~
maker, avoid contact with the moving  
This appliance is top-heavy and  
must be secured to prevent the  
possibility of tipping forward.  
Keep the doors closed until the  
appliance is completely installed  
and secured per the installation  
instructions.  
parts of the ejector mechanism, or with  
the heating element located on the  
bottom of the ice maker. Do not place  
fingers or hands on the automatic ice  
making mechanism while the  
refrigerator is plugged in.  
Do not use water that is  
~
microbiologically or chemically unsafe  
or of unknown quality without adequate  
disinfection or other treatment before or  
after the filter is used; the filter alone is  
not an adequate safeguard.  
This appliance must be installed  
~
and connected in compliance with the  
installation instructions.  
Installation and repair work should  
~
be performed by a Miele authorized  
service technician. Work by unqualified  
persons could be dangerous and may  
void the warranty.  
Use  
This appliance is not designed for  
~
commercial use. It is intended for use in  
domestic households and in similar  
working and residential environments  
such as:  
Installation must comply with local  
~
plumbing regulations and state laws.  
Do not operate any appliance with a  
~
damaged cord or plug, or if the  
appliance has been damaged in any  
manner. Contact Miele’s Technical Ser-  
vice Department.  
– shops, offices and similar work  
environments  
– by customers in hotels, motels, Bed  
& Breakfasts or similar residential  
environments.  
This appliance must not be used in  
~
a non-stationary location (e.g. on a  
This appliance is not intended for  
~
outdoor use.  
ship).  
Do not install the fridge/freezer in a  
~
room with too low an ambient  
Persons who lack physical, sensory  
~
or mental abilities, or experience with  
the machine should not use it without  
supervision or instruction by a  
responsible person.  
temperature, e.g., a garage, as this  
may lead to the appliance switching off  
for longer periods so that it cannot  
maintain the required temperature.  
To reduce the risk of injury, do not  
~
The ice cube maker is not suitable  
~
for connection to a hot water supply.  
allow children to play in, on or near the  
appliance, especially in the door hinge  
area.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
After your appliance is in operation,  
Never use a steam cleaner to clean  
~
the appliance. Pressurized steam could  
~
do not touch the cold surfaces in the  
machine, ice cubes or frozen food,  
particularly when hands are damp or  
wet. Skin may adhere to these  
extremely cold surfaces.  
damage electrical components and  
cause a short circuit.  
Disposal of your old appliance  
Do not refreeze frozen foods which  
~
have thawed completely.  
Before disposing of an old  
~
appliance, first make the door latch or  
lock unusable.  
Do not handle frozen food or ice  
~
with wet hands. Danger of injury.  
Take off the doors.  
~
Do not store or use gasoline or other  
~
flammable vapors and liquids in the  
Leave the shelves in place so that  
~
children may not easily climb inside.  
vicinity of this or any other appliance.  
Consult with your municipal policy  
~
on recycling.  
Do not deactivate the water filter  
~
display.  
Be careful not to damage any part of  
~
the pipework while awaiting disposal  
Do not use sharp-edged objects to  
~
remove frost and ice, or separate  
frozen foods and remove ice trays.  
They will damage the evaporator,  
causing irreversible damage to the  
appliance.  
by:  
-
puncturing the refrigerant  
channels in the evaporator.  
bending any pipework.  
-
-
scratching the surface coating.  
Splashes of refrigerant can damage the  
eyes.  
Do not use defrosting sprays or  
~
de-icers, as they might contain  
substances which could damage the  
plastic parts or which could cause a  
build-up of gases and pose a danger to  
health.  
Your old refrigerator may have a  
~
cooling system that used CFCs  
(chlorofluorocarbons). CFCs are believed  
to harm stratospheric ozone.  
If you intentionally release this CFC  
refrigerant, you can be subject to fines  
and imprisonment under provisions of  
environmental legislation. Make sure the  
CFC refrigerant is removed and disposed  
of by a qualified technician.  
Do not use any oils or grease on the  
~
door seal, as these will cause the seal  
to deteriorate and become porous with  
time.  
Do not block the ventilation gaps in  
~
the plinth or the top of the appliance  
housing unit, as this can impair the  
efficiency of the appliance, increase the  
electricity consumption and cause  
damage to the appliance.  
SAVE THESE  
INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the Fridge-Freezer combination  
aHinged door shelf  
gMain switch to turn the appliance  
On/Off  
bShelves (height adjustable)  
cDoor shelves (height adjustable)  
dFloating drawer  
hSmartFresh drawer  
iIce maker  
jWater filter  
eControl panel  
kSmall freezer basket  
lLarge freezer basket  
mIce cube container  
fHumidity filter  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the Fridge-Freezer combination  
Control panel  
aAccess button "p"  
activates the control panel  
gFood type(s) to be stored in the  
SmartFresh drawer  
(left: high humidity  
right: low humidity)  
bRefrigerator  
cLeft SmartFresh drawer  
dRight SmartFresh drawer  
eFreezer  
hOn/Off sensor button for the  
SuperCool function  
iOn/Off sensor button for the ice cube  
maker  
fTemperature display  
X colder; Y warmer  
jSensor button for the temperature  
and door alarm*  
Allows you to set the desired  
temperature in the refrigerator or  
freezer section  
kWater filter change indicator*  
* Only visible when the relevant  
function is activated  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before use  
Before using for the first time  
Turning the appliance On/Off  
^ Clean the inside of the appliance and ^ Open the upper appliance door.  
the accessories with a mild solution  
of warm water and liquid dish soap.  
Dry with a soft cloth.  
If the appliance was transported or  
laid horizontally for any reason, allow  
^ Turn the appliance On/Off with the  
it to stand vertical for at least 8 hours  
main switch.  
before turning it on. Failure to do so  
will affect the functioning of the  
The main switch is located on the  
appliance.  
right-side underneath the control panel.  
All zones are switched on or off  
together.  
Once on, the appliance begins cooling.  
When the doors are open, the interior  
lights come on.  
The access button will light in the  
control panel.  
The preset temperatures (factory  
default settings) are reached after a  
few hours. Do not put any food in the  
appliance until the preset  
temperatures are reached.  
,Turning off the appliance with  
the main switch does not safely  
isolate it from the power supply.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Using the settings  
The selected sensor button appears  
yellow and depending on the zone  
selected additional sensor buttons may  
appear on the control panel.  
This appliance is operated with the use  
of touch keys activated by a finger.  
– An available button will appear white.  
Depending on the zone selected, you  
– A selected button will appear yellow. can now:  
– adjust the temperature,  
– select the SuperCool function, or  
– select settings for the SmartFresh  
drawers by food type, or  
^ Touch the access button "p" so it  
turns yellow.  
– turn on the ice cube maker.  
For additional information, see the  
corresponding sections in this manual.  
On the control panel you will now see  
the sensor buttons of the four appliance  
zones.  
^ To de-select a zone touch the sensor  
button for that particular zone so that  
it turns white, or select another  
sensor button.  
At the right of the control panel there is  
a sensor button to turn the ice maker on  
and off.  
When the ice maker is in operation, the  
sensor button appears yellow.  
^ To leave the settings menu, touch the  
access button "p" so it turns white.  
The last settings entered are stored.  
If the access button is not pressed  
the display will go out after approx.  
30 secs.  
^ To change settings (e.g., to set the  
temperature, etc.), touch the sensor  
button for the appliance zone you  
wish to set.  
The sensor buttons for the four  
appliance zones now disappear from  
the control panel.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Custom settings  
Turning the button sound  
On/Off  
In the custom settings mode you can  
select and change functions. The  
function possibilities are described in  
the respective chapters of this manual.  
If you prefer the buttons to be silent  
when touched, the button sound can be  
turned off.  
^ Touch the access button "p" so it  
turns yellow.  
Function  
Display text  
Temperature unit  
°C - °F  
(see "Setting the  
temperature")  
^ Touch the sensor button for the  
RemoteVision  
;
refrigerator section so it turns yellow.  
Module settings  
(optional accessory)  
^ Note the position of the X button, but  
do not touch.  
Button sound on/off  
(see "Settings")  
=
^ Touch the access button "p" again so  
it turns white.  
No function  
^
c
Only the access button "p" is visible.  
To enter and exit the  
Settings mode  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
^ While holding down the X button,  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
^ Tap the X button until = appears in  
the display.  
^ Touch the access button "p" to  
confirm.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
^ By touching the X button, you can  
choose between:  
Turning off for longer periods  
of time  
= 0 : Button sound is off  
= 1 : Button sound is on  
= – : Return to menu.  
If the appliance is not going to be used  
for an extended time (for example,  
during a vacation) some precautions  
should be taken.  
^ Touch the access button "p" to  
confirm the setting.  
^ Shut off the water supply line,  
(several hours before switching off  
the appliance)  
^ Tap the X button until you see ; in  
the display.  
^ Touch the access button "p".  
^ Take all food out of the appliance  
You have now left the Custom settings  
mode.  
^ Turn the appliance off at the main  
switch  
^ Unplug the appliance  
^ Empty the ice cube container  
^ Clean the interior  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
^ Remove and discard the water filter  
(secure the filter cap)  
^ Leave the doors open to prevent  
odors  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature and door alarm  
The appliance is equipped with an  
alarm system, to ensure that the  
Turning the temperature alarm Off  
As soon as the alarm condition is  
corrected, the alarm signal turns off  
and the affected zone stops flashing in  
the display. The "alarm" indicator goes  
out.  
temperature does not rise unnoticed  
because of energy loss or open doors.  
The alarm system is always  
operational, it does not need to be  
turned on.  
Temperature alarm  
If the temperature becomes too warm,  
an alarm sounds, the "alarm" indicator  
turns red and flashes. At the same time  
the affected zone flashes in the display.  
^ To turn the alarm off early, press  
the "alarm" sensor button.  
The alarm signal turns off. The "alarm"  
indicator remains red and the  
corresponding appliance zone  
continues to flash until the alarm  
condition is corrected.  
If the freezer zone is affected, the  
temperature display shows the warmest  
temperature reached during the alarm.  
The alarm will sound and the display  
will flash if:  
If the temperature in the freezer  
zone reaches 0°F (-18°C) or higher,  
check that food has not defrosted.  
– too much warm air flows into the  
appliance, for example when food is  
being loaded, re-arranged, or taken  
out.  
Door alarm  
If one of the appliance doors is left  
open for over 5 minutes, an alarm  
signal will sound and the "alarm"  
indicator will turn red.  
– large amounts of food are being  
frozen at once.  
– the power fails.  
Turning the door alarm Off  
Once the door is closed the alarm turns  
off and the "alarm" indicator goes out. If  
the door has not been closed properly,  
the alarm will sound again after five  
minutes.  
^ To turn the alarm off early, press  
the "alarm" sensor button. The "alarm"  
indicator and signal will turn off.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the temperature  
Setting the temperature in the  
refrigerator and freezer  
sections  
Temperature range  
The temperature can be selected within  
the following ranges:  
The refrigerator and freezer sections  
can be set independently of each other.  
– Refrigerator:  
36°F to 46°F (2°C to 8°C)  
^ Touch the access button "p" so it  
turns yellow.  
A temperature of 37°F (4°C) in the  
refrigerator section is recommended.  
– Freezer:  
7°F to -11°F (-14°C to -24°C).  
To freeze fresh food and store frozen  
food for an extended period of time, a  
temperature of 0°F (-18°C) is  
suggested.  
^ Touch the sensor button for the  
refrigerator or freezer section so it  
turns yellow.  
The room temperature and the  
installation location can affect the time it  
takes for the appliance to get to the  
desired temperature. If the room  
temperature is too high, it may not be  
possible for the appliance to reach the  
lowest temperature.  
^ Use the X and Y buttons next to the  
temperature display to set the  
temperature warmer or colder.  
Tap the X and Y sensor buttons to  
raise/lower the temperature 1°, or hold  
them down to move through the  
temperature range more quickly.  
The temperature display on the  
control panel always shows the  
desired temperature.  
When you have adjusted the  
temperature, wait for approx. 6 hours if  
the appliance is not very full and for  
approx. 24 hours if the appliance is full  
before checking the temperature, as it  
will take this long for the appliance to  
reach the temperature. If, after this  
time, the temperature is still too high or  
too low, you will need to adjust it again.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the temperature  
Temperature unit  
^ By touching the X button you can  
select either Fahrenheit or Celsius for  
the temperature display.  
† 0: Fahrenheit  
(Fahrenheit/Celsius)  
The temperature can be displayed in  
degrees Fahrenheit (°F) or Celsius (°C).  
† 1: Celsius  
–: return to menu  
^ Touch the access button "p" to  
confirm the setting.  
^ Touch the access button "p" so it  
turns yellow.  
^ Tap the X button until a ; appears in  
the display.  
^ Touch the access button "p".  
You have left the Custom settings  
mode.  
^ Touch the sensor button for the  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
refrigerator section so it turns yellow.  
^ Note the position of the X button, but  
do not touch.  
^ Touch the access button "p" again so  
it turns white.  
Only the access button "p" is visible.  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
^ While holding down the X button,  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
^ Tap the X button until appears in  
the display.  
^ Touch the access button "p" to  
confirm.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SmartFresh drawers  
The SmartFresh drawers provide the  
right combination of temperature and  
humidity. The result is freshness up to  
three times longer than in the other  
zones of the refrigerator.  
Using the SmartFresh drawers  
^ Use the sensor button to select the  
Storage temperatures  
desired drawer.  
For fresh foods that are not adversely  
affected by cold, the best range is  
32° - 37°F (0° - 3°C). This helps to keep  
the food fresh considerably longer than  
in the rest of the refrigerator, spoiling is  
minimal.  
The selected sensor button turns  
yellow, and the sensor buttons for the  
food choices appear.  
The most recently selected food type(s)  
appear yellow.  
Humidity  
The level of humidity in the SmartFresh  
drawers is dependent on:  
^ Use the sensor buttons to select the  
desired food type(s), so they appear  
yellow.  
– the moisture content of the stored  
food, and  
– Several food types can be selected  
at the same time.  
– the quantity of food stored.  
The closer the humidity in the appliance  
matches the moisture content of the  
food, the more moisture the food will  
retain, and the fresher and crisper it will  
stay over a longer period of time.  
– To delete a food type, simply press it  
again.  
– Depending on the food types  
selected, the optimal humidity is  
determined for the crispers.  
– The "deli" and "dairy" settings are the  
most energy efficient.  
^ Touch the access button "p" to  
confirm the settings.  
^ Place the food in the drawer.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SmartFresh drawers  
For optimal storage conditions, it is  
always best to store similar foods  
together in one crisper.  
Foods that are best stored under dry  
conditions  
– fresh fish and shellfish, meats,  
poultry, sausage, dairy products and  
deli salads.  
Foods that are best stored under  
moist conditions  
– fresh produce, e.g., vegetables,  
lettuce, herbs, mushrooms,  
cabbage, fruit.  
Remember that higher moisture levels  
can only be attained when the food is  
stored unpacked so air can circulate  
freely.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the refrigerator efficiently  
Different storage zones  
– fresh bread dough, pastry dough,  
cake batters,  
Due to the natural circulation of air in  
the appliance, there are different  
temperature zones in the refrigerator.  
Cold, heavy air sinks to the lowest  
section of the appliance. Make use of  
these different zones when placing  
food in the appliance.  
– dairy products.  
Do not store explosive materials in  
the appliance or any products  
containing propellants (e.g. spray  
cans). Danger of explosion.  
This appliance uses a dynamic  
cooling feature to establish a  
constant temperature during  
cooling. As a result, the differences  
between temperature zones are less  
pronounced.  
If storing high-proof alcohol, make  
sure it is tightly closed and stored  
upright.  
Do not store cooking oil in the  
refrigerator door. Traces of oil can  
cause stress cracks to occur in the  
plastic components in the door.  
Leave some space between items, so  
air can circulate freely around them.  
Make sure the ventilation slits are not  
covered - this is important for the  
cooling performance.  
Do not allow food to touch the rear  
wall of the appliance, it may freeze  
to the wall.  
Warmest area  
To allow air to circulate efficiently,  
do not pack food too closely  
The warmest area is in the top section  
of the door (storage shelf). Use this  
area to store items such as butter and  
cheese.  
together in the refrigerator. Do not  
cover the fan in the rear wall of the  
refrigerator, as this is essential for  
keeping the appliance cool.  
Coldest area  
The coldest area in the refrigerator is  
directly above the SmartFresh drawers.  
The temperature in the drawers  
themselves is even colder.  
Use these cold areas in the refrigerator  
for all highly perishable foods, such as:  
– fish, meat, poultry,  
– deli meats, store-bought meals,  
– dishes or baked goods containing  
eggs or cream,  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the freezer efficiently  
Freezing food  
Placing food in the freezer  
Fresh food should be frozen as quickly  
as possible. This helps maintain the  
nutritional value, vitamin content,  
appearance and taste of the food.  
Food to be frozen can be placed  
anywhere in the freezer section.  
Use the large freezer basket for large  
quantities of food.  
Never refreeze partially or fully  
Load bearing capacity of the baskets:  
defrosted food. Consume defrosted  
food as soon as possible, it will lose its  
nutritional value and spoil if left for too  
long. Do not refreeze defrosted food  
unless it has been cooked.  
Small  
Large  
basket  
basket  
KF 18X Vi/SF  
KF 19X Vi/SF  
30 lbs  
72 lbs  
(14 kg)  
(33 kg)  
Before placing food in the freezer  
41 lbs  
94 lbs  
^ When you are planning to freeze  
large amounts of food (more than  
4 ½ lbs [2 kg]), switch on the  
SuperCool function ahead of time  
(see "SuperCool").  
(19 kg)  
(43 kg)  
^ Spread the food to be frozen across  
the bottom of the freezer basket or  
across the shelves, so that it will  
freeze through to the core as quickly  
as possible.  
This will provide the food already in  
the freezer with a protective boost of  
cold air.  
^ When placing items in the freezer,  
make sure the packaging and  
containers are dry, to keep them from  
sticking together when frozen.  
When freezing, make sure that  
already frozen food does not come  
into contact with fresh food being  
frozen, this could cause the frozen  
food to defrost.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the freezer efficiently  
Defrosting  
Cooling drinks quickly  
Frozen food can be defrosted in  
different ways:  
To cool drinks quickly, switch on the  
SuperCool function. See "SuperCool" for  
more information.  
– in a microwave oven,  
– at room temperature,  
Do not leave bottles in the freezer for  
more than 1 hour, closed containers  
could burst.  
– in the refrigerator (the cold given off  
by the frozen food helps to keep the  
other food cold),  
– in a steam oven.  
Poultry It is especially important to  
observe proper hygiene when  
defrosting poultry. Never save the liquid  
from defrosted poultry. Drain it away  
and promptly wash the container, the  
sink and your hands. Danger of  
salmonella poisoning.  
Fruit should be defrosted at room  
temperature in its packaging, or in a  
covered bowl.  
Most vegetables can be cooked while  
still frozen. Simply place directly into  
boiling water or hot oil.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SuperCool  
When the SuperCool function is  
activated, the appliance is cooled as  
quickly as possible (to a factory-preset  
temperature).  
Refrigerator: 35°F (2°C)  
Freezer: -22°F (-30°C)  
The temperature in the appliance now  
begins to fall, with maximum cooling in  
the zone selected.  
SuperCool  
Switching off SuperCool  
When used with the refrigerator the  
SuperCool function is ideal for the rapid  
cooling of drinks and refrigerating large  
quantities of food.  
The SuperCool function automatically  
switches off after:  
Refrigerator: approx. 6 hours  
Freezer:  
approx. 52 hours  
When used with the freezer the  
SuperCool function is ideal for freezing  
large quantities of unfrozen food. The  
function should be switched on 4-6  
hours before the fresh food is placed in  
the freezer.  
The sensor button turns white, and the  
appliance continues running at normal  
power.  
To save energy, the SuperCool function  
can be switched off early, once the  
food and/or drinks are sufficiently  
chilled.  
If the max. freezing capacity is used,  
24 hours are recommended.  
This helps food to freeze quickly and  
retain its nutrients, vitamins, flavor and  
appearance.  
Switching on SuperCool  
^ Touch the SuperCool sensor button  
so that it turns white.  
The temperature display for the zone  
selected returns to the original  
temperature setting.  
^ Touch the sensor for the refrigerator  
or freezer (as desired) so it turns  
yellow.  
The appliance now continues running  
at normal power.  
^ Touch the SuperCool sensor button  
so it turns yellow.  
In the temperature display for the zone  
selected, the new temperature setting  
appears:  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ice cube maker  
Once the ice cube container is full, the  
ice cube maker switches off  
automatically.  
For the automatic ice cube maker to  
operate, it must be connected to the  
household water supply. See  
"Plumbing".  
Do not use the ice cube container  
for rapid cooling of food or drinks.  
The ice cube maker may become  
blocked and be damaged.  
Turning on the ice cube maker  
^ Make sure that the ice cube  
container is under the ice cube  
maker, as far as possible.  
Do not use the first three containers  
of ice cubes from the ice cube  
maker.  
Ice cubes will not be produced unless  
the container is completely closed.  
Discard the ice produced in the first  
24 hours after switching on the ice  
cube maker.  
This applies for the very first use,  
and whenever the appliance has  
been out of service for an extended  
period of time.  
^ Touch the sensor button for the ice  
cube maker so that it turns yellow.  
As soon as the freezer has cooled to a  
freezing temperature, the ice cube  
container fills with water. Cold air is  
blown directly over the container.  
The amount of ice cubes produced  
depends on the temperature in the  
freezer section. The lower the  
temperature, the more ice cubes will be  
produced in a given period of time.  
As soon as the ice cubes are frozen,  
they fall into the ice cube container.  
Turning off the ice cube maker  
The ice cube maker can produce  
approx. 140 ice cubes within 24 hours.  
Note: Ice production will vary due to  
your water source temperature,  
pressure and hardness.  
The water supply line must be shut  
off several hours before the  
appliance or ice cube maker is  
switched off.  
The production volume of the ice  
depends on the temperature in the  
freezer. The lower the temperature the  
more ice cubes produced.  
After the appliance is turned on for the  
very first time, it can take up to 10 hours  
for the first ice cubes to drop out of the  
ice cube maker and collect in the  
container.  
^ Touch the sensor button for the ice  
cube maker so that it turns white.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic defrost  
Refrigerator section and  
SmartFresh drawers  
Freezer section  
The freezer section defrosts  
automatically.  
The refrigerator and SmartFresh  
drawers defrost automatically.  
The moisture generated in the  
appliance collects in the evaporator. It  
is automatically defrosted and  
dissipated by the condenser  
periodically.  
During normal operation, condensate  
and frost can form on the rear wall of  
the refrigerator and drawers.  
You do not need to remove this  
build-up, it will defrost and evaporate  
automatically with the heat generated  
by the appliance.  
This automatic defrosting system  
enables the freezer to remain  
permanently ice-free, while ensuring  
that the food stored in the freezer stays  
frozen.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the interior fittings  
Moving the shelves  
SmartFresh drawer  
The shelves can be adjusted according These drawers are set on telescopic  
to the height of the food.  
tracks. They can be pulled in and out  
for loading and unloading, or removed  
for cleaning.  
^ Using both hands, grasp the shelf  
from underneath and lift slightly so  
that the rear of the shelf is slightly  
above the mountings.  
^ Pull the shelf forward.  
^ Move the shelf to the desired height,  
then insert the (rear) hooks into  
place.  
^ Make sure the shelf is level.  
^ Open the drawer.  
Floating drawer  
On the hinged-side of the door is a  
safety lock, which must be turned to a  
horizontal position before the drawer  
can be removed.  
The floating drawer can be moved to  
the left or right, moved to another shelf,  
or removed.  
^ Pull the drawer straight out, so that it  
passes over the catches and remove.  
^ To replace the drawer slide it straight  
in along the rails.  
^ Using a suitable object, e.g., coin,  
turn the safety lock to a horizontal  
position a.  
^ On both sides of the drawer, pull the  
latches b upward and lift the drawer  
out of the refrigerator.  
Push the tracks back into the  
refrigerator to avoid injury.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the interior fittings  
The divider in the drawer can also be  
removed for cleaning.  
^ Remove the drawer.  
^ Lift the divider upward and out.  
To re-insert the divider, slide it back  
down along the tracks.  
Important: If the divider is not in  
place, the SmartFresh drawer will  
not work properly.  
Replacing the SmartFresh drawer  
^ Completely extend the telescopic  
tracks.  
^ Lay the drawer on the tracks so that it  
connects in the front and back.  
^ Turn the safety lock back to the  
vertical position.  
^ Slide the drawer in.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the interior fittings  
Adjusting the door shelves  
Removing the hinged door shelf  
For easier loading, unloading, and  
cleaning, the door shelves can be  
shifted or completely removed.  
^ Pull the stops upward and out of the  
shelf, and remove the shelf lid  
upward.  
^ Now remove the hinged container  
upward and out.  
Removing the storage shelf  
from above the drawer  
^ Remove the rear finishing strip, move  
the glass plate slightly toward the  
rear, and carefully lift it upward and  
out.  
^ Using both hands, grasp the door  
shelf by the frame and tip it slightly  
forward.  
^ Slide the tipped shelf up or down  
along the slide-rails, and click it into  
place with the lower hooks.  
^ Make sure the shelf is level.  
Removing a door shelf  
^ Slide it upward all the way to the top  
of the slide-rails, until it can be  
removed.  
Replacing a door shelf  
^ Start at the top of the slide-rails and  
slide the shelf down into the desired  
position.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the interior fittings  
Ice cube container  
Small freezer basket  
The ice cube container is set on  
The small freezer basket can be  
telescopic tracks, and can be removed removed for cleaning.  
for loading, unloading and cleaning.  
^ Slide the basket forward until  
^ Slide the container forward until  
resistance is felt.  
resistance is felt.  
On the hinged-side of the door is a  
safety lock, which must be turned to a  
horizontal position before the drawer  
can be removed.  
^ On both sides of the container, pull  
the latches (see arrow) upward and  
lift the container out of the freezer.  
Push the tracks back into the freezer  
to avoid injury.  
Replacing the ice cube container  
^ Completely extend the telescopic  
tracks.  
^ Lay the container onto the tracks so  
that it connects in the front and back.  
^ Using a suitable object, e.g., coin,  
turn the safety lock to a horizontal  
position a.  
^ Slide the container in.  
^ On both sides of the basket, pull the  
latches b upward and lift the basket  
out of the freezer.  
Replacing the small freezer basket  
^ Fully extend the telescopic tracks.  
^ Lay the basket onto the tracks so that  
it connects in the front and back.  
^ Turn the safety lock back to the  
vertical position.  
^ Slide the freezer basket in.  
Replacing the large freezer basket  
^ Place the basket into the freezer,  
making sure it is seated correctly in  
the connection holes.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
To better maintain your appliance  
avoid the following:  
To reduce the risk of electrical  
shock, disconnect the appliance  
from the power supply by shutting  
off the power main, tripping the  
circuit breaker or unplugging the  
power cord before maintenance.  
– cleaners containing soda, ammonia,  
thinners, or chlorides  
– cleaners containing descaling  
agents or lime removers,  
– abrasive cleaners,  
Never use cleaning agents  
– stainless steel cleaners,  
– dishwasher soap (powder),  
– caustic (oven) cleaners,  
containing abrasive substances  
such as sand, soda, acids, chlorides  
or chemical solvents.  
Non-abrasive cleaning agents are  
also unsuitable, as they can cause  
matte areas to appear.  
– scouring pads, steel wool, hard  
brushes,  
– glass cleaners,  
Only use a mild solution of warm  
water and liquid dish soap to clean  
this appliance.  
– metal scrapers,  
– eraser sponges,  
– steam cleaning products.  
Do not use a steam cleaner to clean  
this appliance. Pressurized steam  
could penetrate electrical  
components and cause a short  
circuit.  
Glass cleaners may be used to  
clean the exterior. However do not  
allow them to sit or "puddle", this can  
cause damage to the surface.  
Remove the cleaner promptly.  
Do not allow water to get into the  
electronic unit or lights.  
The data plate located inside the  
appliance must not be removed. It  
contains information which is  
required in the event of a service  
call.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Before cleaning  
Aluminum frames  
The shelf frames are made of  
aluminum.  
^ Clean the frames with a mild solution  
of warm water and liquid dish soap.  
^ Use the main switch to turn the  
Aluminum is susceptible to  
appliance off completely.  
scratches and nicks, treat with care.  
The main switch is located on the right  
side underneath the control panel.  
The aluminum frames may become  
discolored or otherwise altered if  
soiling is not cleaned away  
promptly.  
^ Unplug the power cord.  
^ Remove any food from the appliance  
and store it in a cool place.  
Do not use stainless steel cleaners;  
lime removers; scouring pads, such  
as pot scrubbers; or used sponges  
that still contain abrasive cleanser  
residue to clean the frames.  
^ Take out any removable parts,  
e.g., shelves.  
Cleaning the interior and  
accessories  
Use a mild solution of warm water and  
liquid dish soap. Wash all accessories  
and drawers by hand. Do not wash in a  
dishwasher.  
^ Clean the appliance as needed.  
^ After washing, wipe down the interior  
and accessories with a clean wet  
cloth, then dry with a soft cloth.  
Leave the appliance doors open for a  
short time, so the moisture can  
evaporate.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Humidity filters  
^ Clean the filters by rinsing them with  
lukewarm water.  
The two humidity filters, located above  
the SmartFresh drawers, must be  
removed for cleaning.  
Do not clean in a dishwasher or  
washing machine. This will damage  
the filter.  
^ Air-dry the filters.  
^ Place the filters back in the filter  
cover.  
^ Put the filter cover back in place,  
inserting the rear hooks first.  
^ Re-insert the SmartFresh drawer.  
^ Remove the SmartFresh drawer.  
Ventilation slits  
^ Check the ventilation slits in the base  
panel regularly. Remove any dirt/dust  
with a vacuum cleaner or brush.  
Clean as needed.  
Door seals  
Do not use oil or grease on the door  
seals. This may cause the seals to  
deteriorate and become porous over  
time.  
^ Unhook the filter cover, 1. in each  
side of the drawer and remove them  
along with the filter mat downwards  
starting from 2.  
^ Clean the door seals with warm water  
and dry thoroughly.  
^ Remove the filter mat.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
After cleaning  
Changing the light bulb  
^ Return all shelves and accessories.  
The lighting automatically switches off  
after the door has been open for  
^ Place food back in the refrigerator  
section, close the appliance doors,  
insert the plug in the power outlet  
and turn the appliance on.  
approx. 5 minutes. This is not a fault.  
After the bulb has cooled for a short  
time it will turn on again.  
^ Switch on the SuperCool function for  
the freezer section. The freezer  
section will cool down quickly.  
If the light does not come on when the  
door is opened briefly, the light bulb  
should be changed.  
^ Once the temperature in the freezer  
section is cold enough, place food in  
the freezer baskets and return them  
to the freezer.  
^ Use the main switch to turn the  
appliance off.  
To reduce the risk of electric shock,  
disconnect the appliance from the  
power supply by unplugging or  
tripping the circuit breaker.  
Upper lighting  
^ Grasp the front of the light cover with  
both hands, and slide it back.  
^ Carefully pull the cover forward and  
out.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Side lighting  
Never touch a halogen bulb with  
bare fingers.  
When inserting a glass halogen bulb  
always hold it with a soft cloth.  
^ Turn the light cover counterclockwise  
and pull out.  
Never touch a halogen bulb with  
bare fingers.  
^ Remove the defective light bulb.  
When inserting a glass halogen bulb  
always hold it with a soft cloth.  
^ Place the new bulb in the socket.  
Halogen bulb type:  
20 W/12 V/socket GY 6.35.  
^ Slip the rear of the light cover back  
into position, then pull it forward and  
into place.  
^ Pull the defective light bulb from the  
socket.  
^ Place the new bulb in the socket.  
Halogen bulb type:  
5 W/12 V/socket G 4.  
^ Put the light cover back on and turn  
clockwise into place.  
^ Restore power to the appliance.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water filter  
The Appliance is supplied with an  
active charcoal filter which improves  
the taste and smell of ice cubes by  
removing chlorine and other  
substances from the incoming tap  
water.  
Note:  
– After installing a new water filter and  
switching on the ice maker, discard  
the first 24 hours' worth of ice  
production.  
– If the ice maker has not been used  
for a prolonged time discard any ice  
cubes in the freezer, empty the  
container and discard the ice  
Additional water filters are available  
from Miele.  
production of the next 24 hours.  
It is important to change the water  
filter regularly.  
– If the appliance or ice maker have  
not been routinely used for several  
weeks or months, or if the ice cubes  
have an unpleasant odor, change  
the water filter.  
To avoid serious illness or death, do  
not use water that is  
microbiologically or chemically  
unsafe or of unknown quality without  
adequate disinfection or other  
treatment before or after use of a  
filter.  
Water filter change indicator  
The change indicator will appear  
approx. every 6 months depending on  
the quantity of ice produced.  
– When the filter indicator lights red,  
this is an indication that a filter  
change will soon be necessary.  
New water filters (Bypass and Active  
charcoal filters) are available from  
Miele.  
^ When the filter indicator flashes red in  
the display the filter must be  
changed.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water filter  
Exchanging the water filter  
Note: Air trapped in the system may  
cause water and the filter cartridge  
to eject forcefully. Use caution when  
removing.  
^ Remove the cap from the used filter,  
3.  
^ Take a new filter cartridge out of the  
packaging and remove the protective  
cap.  
^ Push the cap onto the new filter  
cartridge, 4.  
^ Push in and rotate the filter cap on  
the base panel of your appliance  
counterclockwise 180°, 1.  
^ Pull the used filter cartridge out of the  
appliance, 2.  
^ Push the filter cartridge with cap, in a  
horizontal position, all the way into  
the opening in the base panel, 5.  
^ Rotate the filter cartridge clockwise  
180° until the cap is in a horizontal  
position, 6.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water filter  
Using an external water filter  
If your household water supply already  
has an external water filter installed,  
leave the standard water filter (bypass  
cartridge) installed in the appliance.  
^ After the filter change the filter  
indicator in the display still flashes.  
The change must be be confirmed in  
the electronic.  
Confirming the filter change  
^ Press and hold the filter change  
sensor button.  
^ At the same time place a finger on  
the access button. Press and hold  
both sensor buttons for approx. 5  
seconds until a beep is heard.  
The water filter change has been  
confirmed and the filter change  
indicator had been reset.  
The filter change indicator goes out.  
^ Close the door.  
After installing a new water filter  
discard the first 24 hours of ice  
production.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water filter  
State of California  
Department of Public Health  
Water Treatment Device  
Certificate Number  
06 - 1775  
Date Issued: March 10, 2006  
Date Revised: April 3, 2008  
Trad  
e
mark/Mod  
e
l
Designation  
R
eplacement Elements  
9000 077095  
9000 077104  
07134220  
Miele 07134220  
Manufacturer: Cuno, Incorporated  
Th  
e
wat  
e
r tr  
e
atm  
e
nt d  
e
v
i
c
e
(s) list  
e
d on th  
i
s c  
e
rt  
i
f
i
cat  
e
hav  
e
m
e
t th  
e
t
e
st  
i
n
g
r
e
qu  
irements pursuant to Section  
116830 of th  
e
H
e
a
l
th and Saf  
e
ty Cod  
e
for th  
e
follow  
i
n
g
h
e
a
l
th relat  
e
d contami  
nants:  
M
i
crob  
Cysts  
Turbidity  
an c Contam  
None  
i
o
l
o
g
i
ca  
l
Contam  
i
nants and Turb  
i
d
i
ty  
Inor  
ganic/Radiological Contaminants  
None  
Or  
g
i
inants  
Rat  
e
d S  
e
rv  
i
c
e
Capacity: 740 gals  
0.75 gpm  
ow:  
Rat  
on:  
e
d S  
e
rv  
i
c
e
F
l
Cond  
i
t
i
ons of C  
e
rtificati  
Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems certified for  
cyst reduction may be used on disinfected waters that may contain filterable cysts.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water filter  
Performance Data Sheet For Filter Model 07134220  
Using Replacement Cartridge 07134220  
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances  
listed below. The concentration of the indicated substances in water entering the system was reduced to a  
concentration less than or equal to the permissible limit for water leaving the system, as specified in  
NSF/ANSI 42 and 53.  
Note that while the testing was  
performed under standard  
laboratory conditions, actual  
performance may vary.  
System tested and certified by NSF International in Model 07134220  
against NSF/ANSI Standard 53 for the reduction of Cysts and  
Turbidity and against Standard 42 for the reduction of Chlorine Taste  
and Odor; Nominal Particulate Class I.  
To a capacity of 739.68 gallons (2800 liters).  
Substance  
Average  
Influent  
Concentration  
Influent Challenge  
Concentration  
mg/L  
Product  
Water  
Concentration Reduction  
Average Maximum Permissible  
Max.  
Min. %  
NSF  
Test  
%
Product Water  
Concentration  
Effluent Reduction  
Cysts*  
166500 Minimum 50,000/L  
1
99.99  
97.09  
99.95  
1
99.99  
95.42  
516458-05  
516456-05  
Turbidity  
10.7  
11 + 1 NTU  
0.31  
0.5 NTU  
0.49  
Particulate  
Class I Particle size:  
> 0.5 to < 1 um  
Chlorine taste  
and odor  
At least 10,000  
particles/ml  
5700000  
1.9  
30583  
0.05  
99.52  
97.3  
> 85%  
> 50%  
69000  
0.06  
98.9  
511079-03  
511081-03  
2.0 mg/L 10%  
96.84  
* Based on the use of Cryptosporium parvum oocysts  
IMPORTANT: Must be installed and operated  
in accordance with application guidelines.  
Application Guidelines/Water Supply Parameters  
Water pressure  
Water temperature*  
Service flow  
30- 120 psi (207 - 827 kPa)  
33°F - 100°F (0.6°C - 38°C)  
0.75 gpm (2.83 lpm)  
Failure to do so may void warranty.  
Change filter at least every 6 months.  
Flush new cartridge for 3 minutes.  
CAUTION: To avoid property damage due to water  
leakage, you MUST read and follow these operating  
instructions before installation and use of this  
product.  
For estimated costs of replacement  
elements please visit your local appliance  
dealer or parts distributor.  
WARNING: Do not use with water that is  
microbiologically unsafe or of unknown quality  
without adequate disinfection before or after the  
system. Systems certified for cyst reduction may be  
used on disinfected waters that may contain filterable  
cysts.  
NSF is a registered trademark of NSF International.  
CUNO is a trademark of 3M Company used under license.  
© 2007 3M Company. All rights reserved.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lead free certificate  
This product KF 1801 Vi, KF 1811 Vi (KIMBM30US) / KF 1901 Vi, KF 1911 Vi  
(KIMBM36US) is tested and certified by WQA against ORD0902 for California  
"lead free" compliance.  
Miele & Cie. KG  
Carl-Miele-Straße 29  
D-33332 Gütersloh  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
With the aid of the following guide minor problems can be corrected without a ser-  
vice call.  
Repairs should only be carried out by a qualified and trained person in strict  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage and may void the warranty.  
Problems with temperature  
Issue  
Possible fault  
Solution  
The refrigerator The machine is not  
Check whether the appliance is  
switched on at the main switch. The  
temperature display must be lit up.  
or freezer  
turned on.  
section does  
not get cold.  
The machine is not  
plugged in.  
Check that the plug is correctly  
inserted in the power outlet.  
Check that the fuse has Reset the circuit breaker.  
not tripped.  
If the breaker trips again the  
appliance or the outlet may be  
defective. Contact Miele or a  
qualified electrician.  
The temperature is set  
incorrectly.  
Check the display.  
The  
Select a warmer  
See "Selecting the correct  
temperature".  
temperature in temperature.  
the refrigerator  
The SuperCool function SuperCool automatically shuts off  
or freezer  
section is too  
low.  
is still on.  
after: 6 hours for refrigerator;  
52 hours for freezer.  
The door is not closed.  
Check that the doors have been  
closed properly.  
A large amount of food  
is being frozen at the  
same time.  
This makes the compressor run  
longer, causing the temperature in  
the freezer section to fall  
automatically.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Problems with temperature  
Issue  
Possible fault  
Solution  
The freezer section is  
too warm.  
The room temperature is Raise the temperature of  
lower than the ambient the room.  
temperature for which the Operating the appliance  
appliance is designed.  
in a room that is too cold  
will cause the cooling  
system to switch off for  
too long, causing the  
freezer section to become  
too warm.  
The temperature display This is not a fault. If the ice maker is turned on while  
for the freezer shows  
-18°C, although I have  
set a higher  
the ambient temperature of the room is (<+18 ° C), a  
temperature of -18°C is automatically displayed. Only  
then will the ice maker function properly.  
temperature.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
General problems  
Issue  
Possible fault  
Solution  
Water is flowing out of Close the shut-off valve immediately.  
the appliance.  
Check whether the water  
pipe in the appliance is  
defective.  
Contact Miele Technical  
Service.  
Check whether the water  
pressure is too low.  
Contact a plumber.  
Check whether the correct Self-tapping valves and  
water valve has been  
installed.  
3/16" (4.76 mm) saddle  
valves reduce the water  
pressure and can block  
the pipe.  
The door to the  
This is not a fault.  
Wait a few minutes, then  
try again. It should now  
open without force.  
freezer section will not The suction caused by  
open.  
opening and closing the  
door too many times in  
succession prevents it  
from opening.  
The compressor kicks The ventilation slits in the  
Clean with a vacuum or  
on very frequently and plinth and in the top of the brush.  
for too long.  
appliance are covered or  
dusty.  
The doors have been  
Once the fridge gets down  
opened too frequently, or a to the set temperature the  
large amount of fresh food compressor will turn off.  
has been put in at once for  
freezing.  
The door is not closed.  
Check that the doors have  
been closed properly.  
Nothing shows in the Power is not reaching the Check the power supply to  
display. appliance or there has the machine.  
been a power failure.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Alarm / Indicator warnings  
Issue  
Possible fault  
Solution  
The alarm is ringing.  
The appliance door(s)  
have been open for  
longer than 5 minutes.  
Close the door(s).  
The alarm is ringing and The door is not closed.  
Once the alarm condition  
has been corrected, the  
alarm will turn off and the  
"alarm" indicator will stop  
flashing.  
the "alarm" indicator for  
A large amount of food is  
the door or temperature  
being frozen at the same  
is flashing.  
time.  
There has been a power The temperature indicator  
failure.  
will indicate the highest  
temperature reached  
during the alarm.  
The filter display is red. This is a warning that the Order replacement filters  
water filter needs to be  
changed soon.  
from Miele.  
The filter display is  
flashing red.  
The water filter needs to  
be changed.  
See "Exchanging the  
water filter".  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Problems with the ice maker  
Issue  
Possible fault  
Solution  
The ice cube maker  
will not switch on.  
The appliance is not  
plugged in.  
Check that the appliance  
is connected to the power  
supply.  
The ice cube maker  
When the appliance is turned on for the very first time, it  
is not producing any can take up to 10 hours for the first ice cubes to drop  
ice cubes.  
out of the ice cube maker and collect in the container.  
The appliance is not turned Check that the appliance  
on.  
is switched on.  
Contact Miele.  
The water supply line was  
not primed (purged of air)  
before the appliance was  
used for the first time.  
Check if:  
See "Ice Cube Maker"  
and/or "Plumbing" for more  
information.  
– the ice cube maker is  
switched on.  
– the water supply line is  
open.  
– there are ice cubes stuck  
together and blocking the  
exit.  
– the ice cube container is  
in the right position.  
– the freezer compartment  
temperature is too high.  
– the water pressure is too  
low. The water pressure  
must be between 25 and  
120 psi (1.72-8.25 bar).  
Check whether the correct  
water valve has been  
installed.  
Self-tapping valves and  
3/16" (4.76 mm) saddle  
valves reduce the water  
pressure and can block  
the pipe.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Problems with the ice maker  
Issue  
Possible fault  
Solution  
The ice cubes are  
small.  
Other domestic appliances Avoid using such items as  
that use water are in  
operation.  
a dishwasher, washing  
machine or shower at the  
same time.  
Check whether the water  
filter needs changing.  
See "Water filter" for more  
information.  
Check the water pressure.  
The water pressure must be  
between 25 and 120 psi  
(1.72-8.25 bar).  
Consult a plumber.  
Check whether the correct  
water valve has been  
installed.  
Self-tapping valves and  
3/16" (4.76 mm) saddle  
valves reduce the water  
pressure and can block  
the pipe.  
The ice cubes have When ice is stored for an  
Use the ice maker more  
frequently.  
an unpleasant  
odor/flavor.  
extended period it may  
absorb odors, which affects  
the taste.  
Check if the ice cube  
container is dirty.  
Clean the container.  
Unsealed packages in the  
freezer will transfer  
odor/flavor particles to the  
ice cubes.  
Check that food has been  
packed in airtight  
containers.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Problems with the ice maker  
Issue  
Possible fault  
Solution  
The ice maker is not  
producing enough ice  
or the ice cubes are  
misshapen.  
Check the water  
Contact a plumber.  
pressure. The water  
pressure must be  
between 25 and 120 psi  
(1.72-8.25 bar).  
Check that the freezer  
temperature is not too  
low.  
See "Selecting the correct  
temperature".  
Change the water filter.  
See "Water filter".  
Ice is forming in the  
supply hose to the ice  
maker.  
Check the water  
Contact a plumber.  
pressure. The water  
pressure must be  
between 25 and 120 psi  
(1.72-8.25 bar).  
Check whether the  
See "Selecting the correct  
temperature".  
freezer compartment  
temperature is too high.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
The appliance is making noises.  
Issue  
Possible fault  
Solution  
Brrrrr...  
Humming noise made by the  
compressor. This noise can get  
louder for brief periods when the  
motor is switching on.  
These noises are not a  
fault.  
The noise of the  
compressor and the  
coolant circulating in  
the system is  
Blubb, blubb...  
Click...  
A gurgling noise can be heard  
when coolant is circulating  
through the pipes.  
unavoidable.  
Clicking sounds are made when  
the thermostat switches the  
compressor on and off.  
Sssrrrrr...  
On multi-zone and frost-free  
appliances you can sometimes  
just hear the movement of air  
circulating inside the appliance.  
Creaking  
Creaking sounds can be heard  
when material inside the appliance  
expands.  
Rattling, vibrating The appliance is uneven.  
Realign the appliance  
using a level, by  
raising or lowering the  
screw feet underneath  
the appliance.  
The appliance is touching another Move it away.  
appliance or piece of furniture.  
Drawers, baskets or shelves are  
unstable or sticking.  
Check all removable  
items and refit them  
correctly.  
Bottles or containers are unstable Separate them.  
or knocking against each other.  
The transport cable clips are  
hanging loose at the back of the  
appliance.  
Remove the clips.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
In the event of a fault which you cannot MieleCare  
easily fix yourself, please contact the  
(USA only)  
Miele Technical Service Department at  
the address on the back of this booklet. MieleCare, our Extended Service  
Contract program; gives you the  
When contacting the Technical Service  
assurance of knowing that your  
department, please quote the model  
appliance investment is covered by 5  
and serial number of your appliance  
years of worry-free ownership.  
given on the data plate inside the  
MieleCare is the only Extended Service  
appliance.  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory-trained professionals can  
guarantee the safety, reliability and  
longevity of your Miele appliance.  
Please note that unless expressly  
approved in writing by the Miele Ser-  
vice department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling center about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc., are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation!  
Before discarding an old appliance,  
disconnect it from the electrical supply  
and cut off the power cord to prevent it  
from becoming a hazard.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation site  
Have the appliance installed by a  
qualified technician, according to  
the enclosed installation instructions.  
The appliance should be installed in a  
dry, well-ventilated room.  
Do not install the appliance:  
- outdoors  
,WARNING  
- in an environment with dripping  
water  
This appliance is top-heavy and  
must be secured to prevent it from  
tipping forward.  
- in rooms that are at risk of frost.  
Keep the doors closed until the  
appliance is completely installed  
and secured as per the installation  
instructions.  
The installation location should not be  
exposed to direct sunlight, nor near a  
heat source, such as an oven,  
radiator, etc.  
The ambient temperature should not  
drop below 55°F (13°C) or rise above  
110°F (43°C), otherwise malfunctions  
may occur.  
Empty weight of your machine:  
KF 18X1 Vi . . . . . . . . . 455 lbs (206 kg)  
KF 19X1 Vi . . . . . . . . . 496 lbs (225 kg)  
If installation next to a heat source is  
unavoidable observe the following  
minimum distances from the heat  
source:  
– 1 1/4" (3 cm) from an electric cooktop  
or electric oven.  
– 12" (30 cm) from a gas or oil  
cooktop, range or oven.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Base  
Ventilation  
A fully loaded appliance is very heavy.  
The load-bearing capacity of your floor  
must meet the following requirements:  
The air intake and outlet must not be  
blocked or covered in any way. They  
also need to be dusted/cleaned on a  
regular basis.  
KF 18X1 Vi . . . . . . . . . 950 lbs (431 kg)  
KF 19X1 Vi . . . . . . . 1,185 lbs (537 kg)  
Installation niche  
To ensure that the appliance is installed  
securely and functions properly, the  
base must be flat, level and made of a  
hard, rigid material.  
To ensure safe, trouble-free installation  
and the best possible cosmetic result,  
check to be sure that the installation  
space complies with the installation  
dimensions. See "Niche dimensions".  
If in doubt, contact Miele.  
The side walls of the installation cavity  
must be plumb.  
Furniture/fixtures  
The new appliance will be mounted  
securely to adjacent and overhead  
furniture/fixtures.  
The minimum thickness of the side  
walls and the top wall must be 5/8"  
(16 mm).  
For this reason, it is essential that all  
attachable furniture/fixtures be  
connected securely to the floor or wall  
by a suitable means.  
The minimum thickness of the toe-kick  
panel must be ½" (13 mm). A thickness  
of 3/4" (19 mm) is recommended.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Stainless steel panels  
Side-by-side  
Stainless steel door panels and toe-kick This appliance can be installed  
covers are available from Miele.  
"side-by-side" with another  
fridge/freezer using a "Merging Kit".  
Custom door panels  
The "Merging Kit" is available from  
Miele.  
This appliance is compatible with all  
styles and designs of kitchen cabinetry.  
Contact Miele or your dealer for  
specific information about which  
combinations will work with your  
appliance.  
The total weight of the decorative  
panel(s) must not exceed the following:  
KF 18X1 Vi  
Upper door . . . . . . . . . . 104 lbs (47 kg)  
Lower door . . . . . . . . . . . 22 lbs (10 kg)  
For instructions on how to attach the  
appliances and install the heating  
mat, please refer to the instructions  
included with the "Merging Kit",  
available from Miele.  
KF 19X1 Vi  
Upper door . . . . . . . . . . . 84 lbs (38 kg)  
Lower door . . . . . . . . . . . 31 lbs (14 kg)  
Installation options  
Appliances attached together using  
the "Merging Kit"  
There are many different installation  
options. You are limited only by the  
design of the kitchen.  
The door hinge cannot be  
exchanged.  
Single column  
The appliance can be installed at any  
preferred location in the kitchen.  
However, be sure the door will open  
and close properly in the chosen  
location.  
If the appliances are installed directly  
next to each other (without a partition),  
they need to be attached together  
using the "Merging Kit".  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation with partition using the  
"Merging Kit"  
Side panels  
If one side of the appliance is visible, a  
side panel must be used.  
The minimum thickness of the partition  
is 5/8" (16 mm).  
The side panel must be firmly secured  
to the wall, the floor and the overhead  
furniture/fixtures before the appliance is  
placed in the cavity.  
The dimensions of the side panel are  
taken from the opposite wall of the  
installation space. During installation,  
ensure that the cavity is square and the  
measurements are correct.  
If there is a partition with a thickness  
from 5/8" (16 mm) to 6 5/16" (160 mm)  
between the adjacent appliances, then  
each appliance should be individually  
installed within its own niche using the  
mounting accessories included.  
The "Merging Kit" will also be needed.  
The "Merging Kit" is available from  
Miele.  
Installation with partition without  
using the "Merging Kit"  
If there is a partition with a thickness of  
more than 6 5/16" (160 mm) between  
the adjacent appliances, then each  
appliance should be individually  
installed within its own niche using the  
mounting accessories included (the  
"Merging Kit" is not necessary).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Adjusting the door opening  
angle (optional accessory)  
Front panel gap kit  
(optional accessory)  
Depending on the installation site, it  
may be necessary to adjust the door  
opening angle to 90°.  
Two adjacent furniture doors can be  
attached instead of one large door.  
^ Open the door.  
To connect these furniture doors, a  
metal strip can be purchased as an  
optional accessory. Contact Miele.  
^ Insert the banking pin through the  
holes and drive in with a hammer.  
The door opening angle is now limited  
to 90°.  
When attaching the metal strip to the  
furniture doors, observe the maximum  
length of the screws and the position of  
the drill holes.  
Always screw into the best possible  
load-bearing material of the custom  
doors.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Door dimensions (opening angle 90°)  
*The dimensions of the door fronts  
and handles will vary according to  
each individual kitchen.  
3/8" (10 mm)  
A
B
C
KF 18X1 Vi  
32 5/8" (829 mm) Door front max. 1 1/2" (38 mm)* Door handle*  
KF 19X1 Vi 38 11/16" (982 mm) Door front max. 1 1/2" (38 mm)* Door handle*  
Door dimensions (opening angle 115°)  
*The dimensions of the door fronts and  
handles will vary according to each  
individual kitchen.  
A
B
C
D
KF 18X1 Vi 32 5/8" (829 mm) Door front max. 1 Door  
14 5/16" (363 mm)  
1/2" (38 mm)  
handle*  
KF 19X1 Vi 38 11/16" (982 mm) Door front max. 1 Door  
16 7/8" (428 mm)  
1/2" (38 mm)  
handle*  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Niche dimensions  
Niche width (A)  
KF 1801 Vi, KF 1811 Vi  
KF 1901 Vi, KF 1911 Vi  
30" (762 mm)  
36" (915 mm)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Power supply and water connection  
1. Power supply  
2. Water connection  
A
KF 18X1 Vi 15" (381 mm)  
KF 19X1 Vi 18" (458 mm)  
Door front dimensions  
A
B
C
KF 18X1 Vi 53 5/16"  
29  
13  
26 7/16"  
672  
1354 mm /16"  
758  
mm  
mm  
KF 19X1 Vi 53 5/16"  
1354 mm 908  
mm  
35 3/4" 26 7/16"  
672  
mm  
4" - 5 3/16" (102 - 132 mm)  
1/8" - 3/16" (3 - 5 mm)  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Before you begin  
– Adhesive tape  
– Multi-grip pliers  
– Level  
Read these instructions completely  
and carefully.  
Have the appliance installed by a  
qualified technician, according to  
the enclosed installation instructions.  
– Tape measure  
– Square  
When fastening the cabinet to the wall  
behind it (see "Installing the appliance")  
use:  
To reduce the risk of injury or  
damage to the product, two people  
should be used for installation.  
– suitable plugs/screws depending on  
the type of wall.  
These installation instructions are  
intended for use by qualified installers.  
In addition to these instructions, the  
appliance must be installed in  
accordance with all local codes. In the  
absence of a local code, the following  
should be used:  
– several mounting brackets, if required.  
Other  
– Stepladder  
– Dolly, hand truck  
– Wooden beam (cross section  
min. 3" x 4" [75 mm x 100 mm] as an  
alternative tilt protection, length  
depends on the width of the  
installation cavity)  
– In the USA, the National Electric  
Code, ANSI/NFPA 70 - latest  
edition/State and Municipal codes  
and/or local codes.  
– In Canada, the Canadian Electric  
code C22.1 - latest edition/Provincial  
and Municipal codes and/or local  
codes.  
– Wood screws in different sizes  
Optional accessories  
– "Merging Kit" for side-by-side installation  
– Front panel gap kit  
Tools needed for installation  
– Cordless screwdriver  
– Torx screwdriver  
– RemoteVision module for wireless  
monitoring  
– Hammer drill  
– Wood drills in different sizes  
– Hammer  
– Rachet (5/16" / 8 mm)  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Aligning the housing unit  
Check the installation niche  
To ensure a safe, trouble-free  
installation and the best possible  
cosmetic result, check to be sure  
that the installation space complies  
with the installation requirements.  
^ Check the base (see "Installation").  
^ Check the dimensions of the cavity.  
^ Check that the cavity is square.  
^ Check the location of the power  
outlet.  
^ Check the location of the water  
connection (see "Plumbing").  
The housing unit must be carefully  
aligned using a spirit level before  
installing the appliance. The unit  
corners must be at right angles, as  
otherwise the furniture door will not  
align correctly with the 4 corners of the  
appliance.  
^ Check that all furniture parts in the  
vicinity of the appliance are securely  
connected to the wall.  
^ Check that the adjacent  
furniture/fixtures do not collide with  
the open door.  
– The side panels of the housing must  
be even.  
Before installation  
– The housing unit panels must be at  
least 16 mm thick.  
,Caution - the appliance is very  
heavy. Use caution when unpacking  
and opening the door, danger of  
tipping.  
– The plinth facing must be at least  
13 mm thick (or preferably 19 mm).  
^ To protect the base from damage  
during installation, attach a hard  
board, linoleum, etc., to the floor in  
front of the intended installation  
location.  
^ Take the supplied accessories out of  
the protective packaging.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
,Caution! The appliance is no  
longer secured and may be unstable.  
^ From the rear of the appliance  
carefully lift it from the pallet.  
Once the appliance is on the ground it  
can be wheeled around.  
^ Do not remove the installation  
supports from the appliance doors.  
They will be used later in the  
installation niche.  
RemoteVision module  
installation  
(optional accessory)  
Always disconnect the appliance  
from the power supply when  
performing installation, maintenance  
or service work.  
There are transportation safety  
devices inside the appliance to  
protect the shelves and storage  
compartments until installation is  
complete. Do not remove them, or  
parts may be damaged.  
Install the RemoteVision module  
before placing the appliance in its  
installation niche.  
Once connected the RemoteVision  
module will increase the energy  
consumption of the appliance.  
^ Check the appliance for damage in  
transit.  
Do not install the appliance if it is  
visibly damaged. If in doubt, contact  
your dealer.  
The slot for the RemoteVision module is  
located in the lower area of the back of  
your appliance.  
^ Loosen the bracket that holds the  
appliance to the pallet.  
^ Unscrew the screws a on the cover  
b and pull off the sticker c.  
^ Remove the cover b.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
^ Push the module into the slot until it  
^ Pull the antenna d straight out.  
locks into place.  
^ Guide the cover b over the antenna  
d and screw on the cover.  
^ Connect the appliance to the power  
supply and turn it on. After several  
seconds the indicator light e will  
come on.  
^ Angle the antenna d so that it faces  
to the right or left.  
The indicator light will display different  
colors one after the other; any control  
light at the end indicates that the  
module was correctly installed.  
^ If necessary, disconnect the power  
supply and continue installing the  
appliance.  
If the indicator light does not come on,  
installation of the module was  
Preparing the installation  
niche  
unsuccessful. In that case, repeat the  
process. If that does not correct the  
problem, contact Miele.  
,Keep the appliance door closed  
until it is securely fastened in the  
niche. Tipping hazard.  
Because of the size and weight of  
the appliance, it is essential to  
ensure that the appliance cannot tip  
over once it has been mounted in  
the niche.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Mounting Accessories  
The mounting accessories needed for  
installing the appliance into the niche  
are included in the packaging. Several  
plastic bags are included which are  
numbered alphabetically.  
The bag needed for each step will be  
marked with its respective letter.  
The distance "D" between the anti-tip  
brackets b is the width of the  
appliance.  
^ Use the included Torx screwdriver to  
tighten the screws.  
^ Position the anti-tip brackets b on  
the left and right walls of the  
appliance niche.  
Anti-tip brackets  
The anti-tip brackets help keep the  
appliance safely secured to the  
installation niche to prevent tipping.  
^ Mark the holes through the anti-tip  
brackets b on the floor of the  
installation niche.  
Two anti-tip brackets are  
^ Set the brackets aside.  
recommended for each appliance or  
appliance combination (side-by-side).  
Screws are supplied with the  
appliance for various  
applications/materials.  
If the anti-tip brackets cannot be  
attached securely with the screws  
supplied, an alternative anti-tip  
device can be used.  
If the installation niche is deeper than  
the appliance, a solid wooden beam a  
can be placed behind the anti-tip  
Assure that there are no electrical  
wires or plumbing in the area which  
the screws could penetrate-risk of  
injury and damage.  
brackets b so the appliance can be  
securely attached to the base or wall.  
The length of the wooden beam a  
should be the width of the installation  
space.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
^ Drill pilot holes:  
In a cabinet with a back wall  
1/8" (3 mm) for 5 x 60 mm wood  
screws  
1/16" (2 mm) for 4 x 15 mm wood  
screws.  
^ screw the back wall of the cabinet in  
several places directly to the wall  
behind it.  
^ Tightly secure the anti-tip brackets in  
For this, use suitable plugs/screws  
depending on the type of wall.  
the niche.  
Be certain that the screws penetrate  
through the flooring and into the wall  
plate a minimum of 3/4" (19 mm).  
In a cabinet without a back wall  
If the included anti-tip brackets cannot  
be secured in the niche, the built-in  
cabinet must be secured to the wall  
behind it with several screws. Only in  
this way can the appliance later  
secured in the built-in cabinet be  
prevented from tipping.  
screw the cabinet to the wall behind it  
in several places using suitable  
mounting brackets.  
For this, use suitable plugs/screws  
depending on the type of wall.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Securing an alternative anti-tip  
device  
– The beam must cover the appliance  
by at least 2" (50.8 mm).  
If the anti-tip brackets cannot be  
attached securely, an alternative  
anti-tip device can be used.  
^ Mark the installation height (lower  
edge of the beam) on the rear wall of  
the niche.  
Ensure that there is no "give" between  
the appliance and the anti-tip device.  
^ Select screws according to the  
thickness of the wooden beam.  
Example: 3 ½" (89 mm) screw for 2x4  
beam.  
If possible, always screw the  
wooden beam to existing studs.  
Determine the number of screws  
based on the cavity width, to ensure  
that the beam will be attached  
securely.  
^ Locate wall studs near the rear wall  
of the cavity and mark drill holes in  
the beam.  
^ Pre-drill the wooden beam.  
^ Attach the wooden beam to the rear  
wall of the niche.  
Now prepare the water connection  
from the appliance to the main  
supply line (see "Plumbing").  
^ Cut a wooden beam  
(cross section min. 3" x 4"  
[75 mm x 100 mm]) to the required  
length.  
– The length is equal to the width of  
the installation niche.  
– If the installation niche is deeper than  
the appliance, select a beam with a  
larger cross section, or attach two  
beams.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Sliding the appliance into the  
installation niche  
^ Plug the appliance into the power  
outlet b.  
The plug of the appliance should be  
easily accessible after installation.  
If the plug is not accessible after the  
appliance has been installed,  
disconnection from the power  
supply should be completed via the  
circuit breaker.  
If a side-by-side installation is  
desired, connect the two appliances  
together. See the Installation Manual  
included with the "Merging Kit".  
In the case of side-by-side  
installations, a separate outlet must  
be used for each appliance.  
^ To prevent the power cord from  
becoming caught:  
Tie a piece of string to the middle of  
the power cord and feed it forward  
under the appliance. When sliding  
the appliance in, pull the cable  
forward c.  
^ Unscrew the plinth.  
^ Carefully slide the appliance into the  
space until the height-adjustable  
wheels interlock with the anti-tip  
brackets d.  
If resistance is felt when attempting to  
slide the appliance into the installation  
niche - for example, because the floor  
is uneven,  
^ Turn the rear adjustable wheels  
slightly outward (see "Aligning the  
appliance"), then push the appliance  
in.  
Be careful not to damage the water  
pipe or power cord attached to the  
floor.  
^ To protect the corners of the  
installation space, attach the  
supplied edge protector a on both  
sides with adhesive tape.  
^ Remove the edge protector a.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Aligning the appliance  
Important!  
^ Align the appliance with the custom  
When unscrewing the  
front.  
height-adjustable feet, proceed  
gradually, alternating between left  
and right.  
^ Unscrew the height-adjustable feet  
until the mark on the base has  
reached the indicated guide  
dimension 1 1/4" (32 mm). The guide  
dimension of 1 1/4" (32 mm) is  
related to a niche height of 84"  
(2134 mm).  
Important!  
The height-adjustable feet can only  
be unscrewed as far as the mark 2  
3/16" (62 mm) on the base (max.  
niche height of 85 3/16" (2164 mm).  
The installation aids e on the  
appliance door have been designed for  
the following custom door thicknesses:  
– 3/4" (19 mm)  
– 1 1/2" (38 mm).  
The height-adjustable feet at the front  
and rear can all be adjusted from the  
front:  
– Front feet:  
Adjust from the top f, with a rachet  
5/16" (8 mm).  
– Rear feet:  
Adjust with a (cordless) screwdriver  
and/or a rachet 5/16" (8 mm) for fine  
adjustment g.  
^ Align the custom doors with a level.  
^ Use a level to align the installation  
^ If using a wooden beam as an  
alternative anti-tip device, rotate the  
appliance all the way toward the  
wooden beam.  
aids e on the door.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Note:  
If there is no way to attach the top of  
the appliance, it can be attached to the  
sides of the installation niche.  
– The adjustment of the rear feet is  
aided if the appliance is lifted at the  
rear (tipped forward slightly).  
Attaching the appliance to the  
installation niche  
^ Pull out the plate side lugs i.  
^ Secure the attachment plate side lugs.  
^ Screw the attachment plate lugs h to  
the overhead furniture/fixtures.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
^ Insert both filler strips into the  
installation space above the  
appliance, until they click into place.  
^ Open both appliance doors.  
^ If necessary, shorten the filler strip j  
to the required height.  
^ Place the 2 strips on top of each  
other k.  
^ Insert the filler strip until you hear it  
click into place l.  
For a side-by-side combination the filler  
strips from both appliances are put  
together to form one long filler strip:  
^ Take the peg from the "side-by-side  
merging kit" and insert it halfway into  
the filler strip rail on the left-side  
appliance.  
^ Screw the attachment plate lugs m to  
the adjacent furniture/fixtures.  
With side-by-side combinations, only  
the external side of the appliances can  
be secured to the niche.  
^ Place the second filler strip on the  
peg and press both filler strips  
together.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Now connect the water supply to the  
appliance (see "Plumbing").  
Preparing the custom door  
For best results, it is important to  
mount the upper door before the  
lower door.  
^ Open the appliance door.  
^ Measure the distance X between the  
bracket from the upper door and the  
overhead furniture/fixtures.  
^ Loosen the two nuts.  
Set aside the nuts - you will need  
them again later.  
^ With the inside facing up, lay the  
custom door on a stable surface (to  
avoid scratch marks, place some  
plastic or a cloth on the surface).  
^ Unscrew the installation supports n  
from the appliance door.  
^ Loosen the remaining screws from  
the strips o on each side of the door,  
then remove.  
^ Set aside the screws and side strips  
o - you will need them again later.  
^ Remove the light switch cover (see  
arrow).  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
^ Mark the distance X on the back-side  
of the custom door.  
Please note: When attaching the  
mounting frame onto two adjacent  
doors (see "Front panel gap kit")  
screw into the thicker outer frames  
of the doors only.  
^ Also calculate and mark the center of  
the custom door Y.  
^ Remove the mounting frame from the  
appliance door and position it  
according to the markings on the  
custom door.  
The bracket includes a variety of holes  
for the various design options of  
custom doors.  
^ Pre-drill the holes.  
^ Tightly screw on the bracket using  
the pre-drilled holes:  
When performing work on the custom  
door, always observe the following:  
Attach the bracket to each  
attachment point with at least one  
screw.  
– Always select the best load-bearing  
surface of the custom door as the  
location for screws.  
– Always select a screw length that is  
shorter than the thickness of the door  
front.  
^ Attach the bracket at the top with at  
least 10 screws.  
^ Secure the door handle to the front of  
the appliance from the inside.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Attaching and aligning the  
custom door front  
^ Align the custom door height with the  
threaded bolts p.  
^ Now tighten the nuts q on top. This  
secures the appliance door.  
To mount the custom door on the  
lower appliance door, simply repeat  
the steps under "Preparing the  
custom door".  
^ Open the door and hang the custom  
door with the mounting frame over  
the threaded bolts p.  
The position of the lower furniture door  
depends on the position of the upper  
door.  
^ Put the side strips o back into place  
and screw them completely down on  
both sides of the appliance door.  
Bag E contains spare screws for this  
purpose.  
^ Screw the nuts q a few turns onto  
the threaded bolts p. Do not tighten  
the nuts completely.  
^ Close the appliance door and check  
the distance to doors of adjacent  
furniture/fixtures.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Note the size of the upper custom door  
front:  
The fixing brackets are used to secure  
the custom door front to the bottom of  
the appliance door.  
^ Open the appliance door all the way.  
^ Slightly loosen the screw (1.).  
^ Position the fixing bracket on the  
appliance door (2.) and pre-drill a  
hole in the custom door front.  
^ Screw the fixing bracket securely to  
the custom door front (3.).  
^ Tighten the screw (4.).  
^ Put the cover on the bracket (5.).  
^ Measure the distance Y between the  
adjusting rail from the lower door and  
the upper door.  
The number of lower brackets will  
depend on the width and the design of  
the custom door.  
^ Be sure to leave a distance of 1/8"  
(3 mm) from the upper cabinetry  
door.  
Attaching the lower bracket  
(Only for appliances using the "Front  
panel gap kit".)  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Attaching the covers  
^ Insert the cover strip into the space  
between the appliance and the side  
panel.  
^ To mount the cover strips on both  
sides of the upper and lower doors,  
click them into place from bottom to  
top, into the gap between the  
For side-by-side combinations, the  
cover strips (on both sides of the  
appliance) are applied to the  
outermost spaces only.  
appliance door and the custom door.  
^ Attach the light switch cover.  
^ Screw the brackets onto both sides  
of the appliance, to hold the cover  
strip.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
^ Remove the foil from the adhesive  
strips.  
^ Insert the cover plate on the freezer  
compartment door.  
Attaching the toe-kick cover  
^ Attach the toe-kick cover to the  
The maximum height of the toe-kick  
cover is 4" (101 mm) from the top of  
the floor. Do not cover the ventilation  
slits in the plinth. Risk of damage to  
the appliance.  
plinth.  
^ If required, cut the toe-kick cover to  
the required length and height.  
^ Attach the plinth to the appliance,  
and put the included cover plates in  
place.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the appliance  
Mounting the air separator  
The air separator keeps the supply and  
exhaust air separate. This prevents  
warm exhaust air from flowing into the  
machine, optimizing the energy  
performance of the unit.  
^ If necessary, shorten the three parts  
^ Clip the air separator, left and right of  
the partition, in the exhaust grille. Be  
sure that it clicks into place and  
guides the foam partition under the  
exhaust grille.  
of the air separator.  
^ Insert the foam pieces back into the  
sides.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
All plumbing work should be carried  
out by a suitably qualified and  
competent person, in accordance  
with all applicable local and national  
regulations.  
The water quality must conform to  
country requirements for drinking  
water.  
– The appliance is only suitable for  
connection to the cold water supply.  
– The water pressure must be between  
25 and 120 psi (1.72-8.25 bar).  
– A separate shut-off valve must be  
installed, so that the water supply  
can be interrupted as needed.  
– The maximum outer diameter of the  
water pipe (without fittings):  
3/8" (10 mm).  
The shut-off valve for the water  
connection must not be located  
behind the appliance. It is  
recommended to place the shut-off  
valve directly next to the appliance  
(base unit) or in another easily  
accessible location.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Preparing the water connection For appliances with a hose guide  
The connection to the household  
water supply must be installed  
before the appliance is installed.  
^ Turn off the main water valve to prevent  
damage caused by leaking water.  
^ Attach the connecting pipe to the  
shut-off valve, according to the  
instructions supplied by the  
manufacturer of the ice cube maker  
^ position the device in front of the  
installation kit.  
niche and push the stainless steel  
tube through the hose guide at the  
^ Install the connecting pipe. Always  
back of the unit.  
observe the indicated clearance  
dimensions to prevent damage to the  
At this point the niche should be ready  
connecting pipe when pushing in the  
for the appliance to be pushed back  
appliance.  
into it (see "Installing the appliance").  
^ You can now continue with the  
installation.  
^ Secure the connecting pipe to the  
floor with adhesive tape.  
^ You may now proceed to install the  
appliance. See "Installing the  
appliance".  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Connecting the water supply  
^ Push the union nut and seal onto the  
water pipe.  
When connecting the water pipe to  
the solenoid valve of the appliance,  
follow the instructions supplied by  
the manufacturer of the ice cube  
maker installation kit.  
^ Push the end of the water pipe into  
the appliance connection and screw  
on the union nut, 3. First tighten by  
hand.  
^ Then use an open-ended wrench to  
tighten the union nut. Do not over  
tighten.  
When bending the water pipe, be sure  
not to kink it, otherwise there is a risk of  
leaks and water damage.  
^ Open the shut-off valve and the main  
water connection. Check for leaks at  
the connection for the shut-off valve  
and to the appliance.  
Use bending aids.  
^ Switch the appliance on.  
After a maximum of 10 hours the first  
ice cubes will drop out of the ice  
cube maker and collect in the ice  
cube container.  
^ Remove the cap from the appliance  
connection, 1.  
^ Bend the water pipe to suit the  
location of the connection on the  
appliance, 2.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
The appliance is supplied with a  
UL-listed, 3-wire power cord and  
NEMA 5-15 P plug ready for connection  
to a 120 V, 60 Hz supply.  
, Avoid the risk of electrical  
shock  
- Plug into a grounded 3-prong  
outlet.  
The fuse rating is 15 amps.  
- Do not move the ground plug.  
- Do not use an adapter.  
- Do not use an extension cord.  
The appliance requires a 3-wire  
receptacle.  
The receptacle must be installed by a  
licensed electrician only.  
Failure to follow these instructions  
can result in death, fire, or electrical  
shock.  
In the case of side-by-side installations,  
a separate outlet must be used for each  
appliance. Ideally, the power outlet  
should be next to the appliance and  
easily accessible. Do not connect the  
appliance to the power supply by an  
extension cord. Extension cords do not  
guarantee the required safety of the  
appliance (danger of overheating).  
Improper connection of the  
equipment grounding conductor  
may result in electric shock. If you  
are in any doubt as to whether the  
appliance has been properly  
grounded, have the appliance  
checked by a qualified electrician or  
service technician.  
If any changes are needed to the  
household wiring or power supply, this  
work must be performed by a qualified  
electrician.  
Installation, repairs and other work  
by unqualified persons could be  
dangerous.  
Before installing the appliance,  
verify that the voltage, load and  
circuit rating information found on  
the data plate match the household  
electrical supply.  
If there are any questions regarding the  
electrical connection of this appliance  
to the power supply, please consult a  
licensed electrician or call the Miele  
Technical Service.  
U1-800-999-1360  
V1-800-565-6435  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
Miele's RemoteVision Wi-Fi technology  
Be sure your wireless system meets the  
following requirements  
creates a 'virtual link' between your  
appliance and our monitoring center. If  
a fault occurs, Miele's client service  
center will be notified and contact you,  
or another trusted individual identified  
on your call roster, in order to gain  
access to your appliance to fix the  
problem.  
– A wireless router that supports an  
IEEE 802.11b protocol  
– Windows XP® or newer operating  
system, Mac® OS X 10.3 or higher  
– Cable or DSL modem  
– Microsoft® Internet Explorer 6 or  
higher, Safari 2.0 or higher, Firefox  
1.5 or higher  
For information on set-up and  
installation of the RemoteVision module  
see the "Installation" section of this  
manual.  
* Please note that each wireless router  
manufacturer supplies their own device  
drivers and setup programs. Due to the  
differences in manufacturers, exact  
router setup instructions are not  
included in this manual. Wording and  
instructions may vary.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
Accessing the RemoteVision  
control panel  
^ Tap the X button until ; appears in  
the display.  
^ Touch the access button "p" to  
confirm.  
See the table on the following page for  
a description of each setting in the  
display.  
^ Touch the access button "p" so it  
turns yellow.  
^ Use the Y or X buttons to select the  
^ Note the position of the X button, but  
RemoteVision options.  
do not touch.  
^ Touch the access button "p" again so  
it turns white.  
The module has been connected to  
the network when ; # appears in the  
display.  
Only the access button "p" is visible.  
If ; # does not appear, refer to the  
"Network options" section of the  
XKM 2000 Installation Instruction  
manual.  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
^ While holding down the X button,  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
^ Press and hold the access button "p"  
for 2 seconds to confirm the change.  
^ To return to the main menu, tap the X  
button until a solid ; - appears in the  
display.  
^ Press the access button "p" to  
confirm.  
^ Tap the X button until a ; appears in  
Access to the Custom settings mode is  
now active for approximately 10  
seconds.  
the display.  
^ Touch the access button "p".  
You have left the Custom settings  
mode.  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
MasterCool control panel options for RemoteVision  
Status indicators Description of function  
Flashing ; ~  
Flashing ; ‡  
Flashing ; |  
Module booting phase  
Not connected to network  
Connection to network established, no IP address  
assigned  
Solid  
; #  
Connected to network  
Flashing ; <  
In Ad-Hoc Mode, not connected  
In Ad-Hoc Mode, connected  
Flashing ; =  
Selectable  
options  
Description of function  
; -  
; 2  
; 3  
; 4  
Back  
Reboot the module  
Reset to factory settings  
Enter Ad-Hoc Mode  
Note: If you cannot select any option (other than ; - "Back", the module has not  
been installed correctly.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 3712  
M.-Nr. 09 169 250 / 02  
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miller Electric Welding System Big Blue 251D User Manual
NEC Headphones Headset Cordless User Manual
Niles Audio Car Speaker OS 10 User Manual
Nokia Bluetooth Headset BH 302 User Manual
Nortel Networks Network Card 1002rp User Manual
NuTone Electric Heater 9422P User Manual
Onkyo Blu ray Player BD SP309 User Manual
Optoma Technology Projector PK201 User Manual
Panasonic All in One Printer FP7742 User Manual
Panasonic Indoor Furnishings ET PKF100S User Manual