Operating Instructions
Dishwasher
G 2732
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 07 724 110
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Settings J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
External water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Button tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
RemoteVision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
RemoteVision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Problems water intake/drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Comparison Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Electrical Safety
Before installation, make sure that
~
When using your dishwasher, follow
basic precautions, including the
following:
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Keep these operating instructions in
a safe place and pass them on to
any future user.
Be certain your appliance is
~
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
, WARNING - Fire hazard
~
Do not cover or crush the plug of the
appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
The dishwasher must be installed
~
and connected in compliance with the
installation instructions.
Installation and repair work should
~
be performed by a Miele authorized
service technician. Work by unqualified plug which could cause overheating.
persons could be dangerous and may
This dishwasher should only be
~
void the warranty.
installed under a continuous counter
Do not install or use a damaged
top secured to adjacent cabinetry.
~
dishwasher. A damaged appliance is
dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
Do not install this dishwasher
~
beneath a cooking surface, oven or any
appliance that radiates heat.
High temperatures from these units
may damage the dishwasher.
Ensure that any plastic wrappings,
~
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
When installing the dishwasher
~
under a counter top and removing the
toe-kick, a build-under toe-kick must be
installed. Use the respective installation
kit. Danger of injuries.
This equipment is not designed for
~
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Do not cut the intake hose or
~
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Department with specific requirements.
Only connect the dishwasher to the
~
mains when all installation and
plumbing work is complete.
It is recommended that the
~
dishwasher only be connected to the
mains with the plug (no hard-wiring).
The outlet must be accessible at all
times after installation to disconnect the
dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Do not inhale or swallow detergents.
~
Dishwasher detergents contain irritant
To reduce the risk of injury, do not
~
and corrosive ingredients. They can
cause burning in the mouth and throat if
swallowed, or inhibit breathing. Consult
allow children to play in, on or near the
dishwasher.
Only use the dishwasher if all panels a doctor immediately if detergent has
~
are properly in place.
been swallowed or inhaled.
Do not tamper with the controls.
Do not damage, sit or stand on the
Do not drink water from the
~
~
~
dishwasher! Harmful residues could be
present.
door or baskets of the dishwasher.
Close the door when not in use.
Do not fill the rinse aid reservoir or
~
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
Under certain conditions, hydrogen
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
If the power cord is damaged it
~
EXPLOSIVE. If the hot water system has must only be replaced by a Miele
not been used for such a period, turn
on all hot water faucets and let water
flow from each for several minutes
before using the dishwasher. This will
release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
Service technician with a genuine Miele
power cord.
Disposal of an appliance
If the appliance is removed from its
~
installation site and will not be used,
remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
Be sure that all items placed in the
~
dishwasher are "dishwasher safe". For
items not labeled, check the
manufacturer’s recommendations.
SAVE THESE
When loading tableware, place
~
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
INSTRUCTIONS
Only use detergents and rinse aids
~
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray
gTriple filter system
hData plate
c Upper basket
iChild Safety Lock in the door handle
(not visible)
d Middle spray arm
jRinse aid reservoir
e Air inlet for drying
(depending on model)
kDual compartment detergent
dispenser
f Lower spray arm
lSalt container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
aTechnical Service Interface
Allows a service technician to check
and update the machine when
applicable.
e Selection buttons -e
To highlight selections in the display,
to change displayed values and to
scroll between menus.
b d Delay Start button with indicator
f "OK" button
To confirm the highlighted menu or
selected value.
c K button (info)
To display more information about
the displayed menu
g Start button with indicator
To start the selected wash program
d Display
See the following pages for more
information
h s On/Off button
To turn the dishwasher on and off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Display function
The following can be selected in the
display :
Use the selection buttons -e to
highlight selections.
– the wash program
– the options
To confirm these messages or settings
press "OK" and the display switches to
the next menu or to another menu level.
– the start time
To select a menu, highlight it with the
selection buttons and confirm with "OK".
– the settings J menu
– information
The symbols in the left column of the
"Settings J" menu show which submenu
is displayed.
During a running program the display
shows :
The arrows on the right side in the
display show that more selections or
text are available and can be displayed
with -e.
– the program name
– the program sequence
– the approximate remaining time
– faults and messages
A dotted line - - - - - - is shown to
indicated the last selection available.
To save energy, if a button is not
pressed within a few minutes the
display will turn off. To show the
display again, press any button.
A check L will appear beside the
currently selected option.
The "Settings J" menu allows you to
customize the dishwasher settings.
See "Settings" for more information.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption you
may connect the dishwasher to a
cold water source.
^ For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
^ If the dishwasher is connected to hot
water, select "Energy Saver" when
washing light to normally soiled
dishware. The water will not be
heated, therefore the dishes may be
more wet at the end of this program
than when using other programs.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid. Detergent dosage is
dependent upon the amount of
soiling and type of dishware being
washed. See the "Program Guide" for
more information.
^ When using powder or gel detergent
reduce the amount to 2/3 when
washing a small load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads select "Express".
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Child Safety Lock
^ Press the release catch inside the
door grip.
The Child Safety Lock is designed to
prevent children from opening the
dishwasher.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
restart.
^ To lock the door, push the slider
below the door grip to the right.
^ To unlock the door, push the slider to
the left.
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into place.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
^ Turn the dishwasher on s.
The display changes automatically to
the time of day setting.
The Welcome screen shows when the
washer is turned on for the first time.
12:00
The display changes automatically to
the language setting.
Set the time of day
C
F
#eština
dansk
-
e
^ Select the hours with the -e buttons
and confirm with "OK". Repeat to set
the minutes.
deutsch
The settings will be saved after the first
wash program has finished.
^ Select the desired language with the
-e buttons and confirm with "OK".
After confirming the minutes the Refill
salt and Refill rinse aid messages may
show. (See the relevant sections of the
manual for more information.) Confirm
each message with "OK" and the
The selected language is marked by a
L check.
The display changes automatically to
the clock format setting.
display changes to the main menu.
C
24 h clock
12 h clock
Normal
-
e
Y
Pots & Pans
China & Crystal
^ Select the hours with the -e buttons
to choose the clock format desired
and confirm with "OK".
A program can be selected now or the
dishwasher can be turned off "K".
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
Checking the water hardness
The water hardness level set can be
viewed under the submenu "Water
hardness". See "Settings J - Water
hardness".
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
^ If necessary, reset the hardness to
that of your local water supply, see
"Settings J - External water softener".
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4 °d
(4 gr/gal [US]), the water should be
softened.
External water softener
If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, the water
hardness must be set in the
dishwasher.
– The water softener must be filled with
dishwasher salt for reactivation.
If using "Tab" products which include
salt, you should still add salt to the
machine to achieve optimal cleaning
results.
^ Set the dishwasher to the hardness of
the external water softener. See
"Settings J - External water softener".
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– The dishwasher must be
programmed to correspond to the
water hardness in your area.
If the hardness of your local supply
is constantly lower than 4 °d (4 gr/gal
[US]), you do not need to add water
softener salt. The "Refill salt"
indicator will turn itself off
automatically.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt container
,Inadvertently filling the salt
container with dishwashing
detergent will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
4.5 lbs (2 kg) of salt. As it is filled,
water will run out.
^ Remove the lower basket and
unscrew the salt container lid.
When opening the salt container,
water will run out. Open the
container only to refill salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ If the dishwasher will not be used
immediately, run the "Express"
program (without the "Turbo"
function). This will remove any traces
of salt from inside the wash cabinet.
Salt refill message
^ When the display shows k Refill salt,
refill the salt after the program has
finished.
^ Confirm with "OK".
The message will clear from the
display.
^ If the message still appears the salt
concentration has not reached the
correct level. In this case press "OK"
again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dosed.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
When using "Tab" detergents rinse
aid is not needed.
The rinse aid reservoir holds approx.
3.7 oz (110 ml).
Adding rinse aid
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
To optimize the wash result, the
rinse aid dosage can be adjusted.
See "Settings J - Rinse aid".
^ Press the button in the direction of
the arrow until the flap springs open.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid refill message
When the H Refill rinse aid message is
first displayed, there will be enough
rinse aid left for 2 - 3 washes.
^ Refill rinse aid after the program has
finished.
If the "Tab" option is selected, the
Refill rinse aid will not come on.
See "Settings J - Detergent".
^ Confirm with "OK".
The message will clear from the
display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage,
tall, narrow and hollow items,
i.e. vases or champagne glasses,
should be placed in the center of the
basket rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
If unsure whether your china and
crystal are dishwasher safe, please
check with the manufacturer. The
China & Crystal program, although
extremely gentle and thorough can
cause the china and crystal to "wear"
if they are not dishwasher safe.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Split cutlery tray
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the
holders. Spoons should be placed in
the opposite direction with the handles
between the holders.
The upper spray arm must not be
blocked by tall cutlery items.
The inserts of the cutlery tray can be
removed.
Single inserts can be removed to make
room for tall items in the upper basket.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Removable spike insert
The spike insert can be removed to
create more space for larger items,
e.g. a saucepan.
,Always use the dishwasher with
the upper and lower basket inserted.
(except during the Tall items
program).
Removing the insert a:
^ To remove an insert, gently pull up on
the handle.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
Replacing the insert b:
^ Slide the hitches of the insert under
the horizontal struts of the upper
basket.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
^ Push down on the handle to snap the
insert into position.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjustable cup racks
Coffee bar
^ Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
(depending on model)
Glasses can be leaned against the
coffee bar to allow a firm stand.
The height of the cup rack can be
adjusted in two levels.
^ The bar can also be used to separate
two rows of glasses.
^ Pull the cup rack upwards and let it
engage at the desired height.
^ To stack wide items, flip the bar to
the right.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Universal support bar
The support bar will hold tall glasses
and stem-ware securely.
^ Fold the bar down and lean the
desired glasses against it.
^ If desired, a section of the cutlery tray
can be removed to allow for even
taller glasses.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
The upper basket can be raised or
lowered to accommodate tall items.
For example: If the upper basket is in
its highest position a plate with a
diameter of 12 3/16" (31 cm) can be fit in
the lower basket.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
^ Slide out the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Foldable spikes
The foldable spikes can be used for
small plates and saucers.
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Two rows of spikes can be folded
down, to create more room for larger
dishware, e.g. pots, pans and bowls.
Small plates and saucers can also be
arranged in the lower basket.
^ Press the yellow lever down a and
fold down the spikes b.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable spike insert
Removable PlateGuard Plus with
StemGuard
The spike insert can be removed in
order to make room for larger tableware (depending on model)
or to use a different insert.
This insert is ideal for cups, glasses,
plates, bowls, pots and pans.
Removing the insert a
^ To remove the insert, gently pull the
handle upwards.
^ To arrange tall items the cup rack
can be raised.
^ The stemguard can be used to hold
the stems of glassware or coffee cup
handles.
Replacing the insert b
^ Slide the hitches of the insert under
the struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Vase / Bottle insert
(depending on model)
The vase / bottle insert can be used to
rinse narrow items, e.g. vases, baby
bottles, etc.
Removing the insert a:
^ To remove the insert, gently pull the
handle upwards.
Inserting the insert b:
^ Place the insert into the lower basket.
^ Place the insert into the lower basket
as shown in the illustration. If placed
anywhere else, water will not reach
all surfaces. The item will not be
properly cleaned.
^ Slide the hitches of the insert under
the struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or Miele. Depending on the model some accessories come standard
with the machine.
Glassware insert GGO
To wash long stemmed glassware,
attaches to the upper basket
Cappuccinatore insert GCEO
To wash the parts of the Cappuccinatore
(milk froth mug supplied with the Miele
Coffee System), attaches to the upper
basket
Cappuccinatore insert GCEO
Multi-function basket GMFO
To wash the parts of the Cappuccinatore
To wash baby bottles, saucers and small
items, attaches to the upper basket
Tall glassware insert GGU
To wash a large number of tall glasses,
attaches to the lower basket
Large diameter plate insert
GTLU 35
To wash plates with a diameter up to 14"
(35 cm), attaches to the lower basket
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
packaging. See "Settings J - Tab" for
more information on detergent usage.
Detergent tabs are not recommended
for use with the program "Express". The
tabs may not dissolve completely.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
dishwasher.
Dishwasher cleaning products are
available from MIele.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
When using the "China & Crystal"
program reduce the amount of
detergent used to at least ½ of the
normal dosage. Also make certain
your china and crystal are
dishwasher safe.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to compartment II and
close the flap.
^ If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
^ To open, press the latch on the
detergent dispenser. The flap will
spring open.
The flap is always open at the end of a
program.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
Selecting a program
^ Make sure the spray arms can rotate
freely.
Choose your program according to the
type of load and soiling.
^ Close the door.
The "Program guide" describes the
programs and using.
^ Open the water supply, if closed.
^ Turn the dishwasher on s.
The "Start" indicator flashes.
Information about the selected program
can be displayed by pressing the K
button.
The main menu shows in the display.
If the memory function is selected, the
last selected program is displayed. See
"Settings J - Memory".
^ Select the desired program and
confirm with "OK".
The display changes to the program
menu.
Normal
-
Sensor Wash
Pots & Pans
China & Crystal
Duration:
Options
1:32 h
e
Back -
The detergent type can now be set.
You can choose between powder,
gel or Tabs. See "Settings J - Tab".
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre
rinse
Main
wash
Interim rinse
Final
rinse
Drying
1
x
2
x
1
x
2
Normal
For normally soiled
dishware with dried on
food
x
x
x
x
x
x
Pots & Pans For normally soiled pots
& pans with dried on
x
food, and heavily soiled
dishware, use 120%
detergent recommended
China &
Crystal
For temperature sensitive
glassware and lightly
soiled dishware, use 50%
detergent recommended;
sensor controlled
as
x
as required
x
x
required
GlassCare program
Express
"Quick program" for lightly
soiled dishware, e.g. party
dishware or to remove salt
traces from the wash
x
x
x
x
cabinet after refilling salt,
includes sensor controlled
GlassCare; not suitable for
detergent tabs
Rinse &
Hold
To rinse dishes when a
complete program is not
needed.
x
SaniWash To sanitize dishware, e.g.
baby bottles, cutting
x
x
x
x
boards and preparation
dishware
Heavy Soil For heavily soiled
dishware with dried
starchy food
x
x
x
x
x
x
x
x
x
x
x
Sensor
Wash
Sensor controlled program
for normally soiled
dishware
as
as required
required
Economy
For normally soiled
dishware, energy saving
program with a long
soaking time and a low
temperature; includes
sensor controlled
x
GlassCare
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre-rinse
2
Main
wash
Interim rinse
Final Drying
rinse
1
1
x
2
Light Soiling
For lightly soiled
dishware, e.g. party
dishware
x
x
x
x
x
x
Energy Saver The water intake
temperature must be
115°F (45°C) for light
to normally soiled
dishware
x
x
Plastics
To gently clean
dishwasher safe
plastics and plastic
toys
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Starch/Cheese For dishware with dried
on starchy or cheesy
food; 120% detergent
recommended
LG items
soiled
For extra large, heat
resistant items, e.g.
large vases. Remove
upper basket
Glassware - no To wash glassware
rinse aid warm without detergent and
rinse aid; rinse cycle
with warm water
Glassware - no For a quick cleaning of
rinse aid cold glassware for direct
reuse; use without
detergent and rinse aid
Usage:
Electric: 0.01 - 1.3 kWh
Water:
1.1 - 6.6 gal (4 - 25 l)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Selecting options
c
Back
-
Options can be added to the selected
program.
Turbo L
^ Confirm the highlighted menu
Options with "OK".
Extended drying
^ Select the desired option and confirm
with "OK".
The display shows the available options
for the selected program.
The selected options are marked with a
Available options:
L check.
Turbo:
The display changes to the program
menu.
– For shortening the program duration.
To achieve optimum results, energy
consumption rates will increase.
^ Repeat the process for more options.
^ To deselect an option, confirm it
again with "OK".
Pre-rinse:
– For easily removable soiling
Soak:
– To soak stubborn soiling.
When using powder detergent, fill
approx. 1 teaspoon (5 g) of
detergent in detergent
compartment I.
Extended drying:
– To enhance drying of odd shaped
dishware and plastic items.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Starting a program
Time display
^ Press the "Start" button.
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
The program begins and the "Start"
indicator lights.
remaining time is shown in the display.
Cancel a program only in the first
few minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
The current time of day, the remaining
and end time of the program can be
displayed during the running program.
^ Press the d button.
^ To change back to the main menu
press d again.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
At the end of a program
Preparing your appliance for
an extended vacaion
At the end of a program the display
shows End.
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
Dishes tends to chip if removed still hot
from the dishwasher.
enough to reduce the risk of a leak.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
^ Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Turn the dishwasher off s.
The dishwasher continues to use
electricity until turned off with the s
button.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Interrupting a program
Changing a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
If the detergent flap is already open
do not change the program.
If a program has already started and
you wish to change it:
,Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Sensor Wash
Rinse
1:30 h
Cancel
^ Select Cancel and confirm with "OK".
The program is canceled.
Sensor Wash
End
Back
-
^ Select Back and confirm with "OK" .
The display changes to the program
menu.
^ Select and start the desired program
as usual.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Delay Start
^ Press the "Start" button.
The starting time of a program can be
delayed between 15 minutes and 24
hours. The start can be delayed in
15-minute-increments.
Sensor Wash
Start at:
8:00pm
Cancel
When using the "Delay Start"
function make sure that the
The program name and the start time
are displayed.
detergent compartment is dry before
adding detergent, use a cloth if
necessary. The detergent might
stick together and not get
The indicators "Start" and d light.
The program starts automatically at the
selected time. The d indicator goes
out.
completely rinsed out. Do not use
liquid detergent when selecting
"Delay Start", the detergent could
leak out of the compartment.
Starting a program before the delay
start has elapsed:
A program can be started before the
delay start time has elapsed.
^ Turn the dishwasher on s.
The "Start" indicator flashes.
^ Select the desired program.
^ Press the d button.
^ Select Cancel and confirm with "OK".
The d indicator goes out. The program
selection is displayed and the "Start"
indicator flashes.
The display shows the current time of
day, the last selected start time and the
program end time. The d indicator
lights.
^ Select and start the desired program.
The program starts and the "Start"
indicator lights.
12:00
Start time:
End:
8:00pm
9:32pm
^ Select the desired start time. Holding
the button automatically increases or
decreases the time. The end time will
be automatically adjusted.
^ Confirm with "OK".
The display changes to the program
menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
The "Settings J" menu allows you to
adjust standard settings.
Press the : button to see more
information about the program
currently selected.
Opening the Settings J menu
^ Turn the dishwasher on by pressing
the "s" button.
Language J
The display contents can be shown in
different languages.
The main menu shows in the display.
If the memory function is selected, the
last selected program is displayed. See
"Settings J - Memory".
The displayed language can be
changed in the submenu "Language J".
Select Back to switch to the program
^ Select the desired language and
confirm with "OK".
selection.
Settings F...
Normal
-
e
The flag behind the word
"Language J" serves as a guide
when an unfamiliar language is
selected.
China & Crystal
In this case select the respective
menu with a flag until the flag shows
in the left column of the display. The
submenu "Language J" is now
shown.
^ Scroll down in the list to Settings J
and confirm with "OK".
The display changes into the menu
"Settings J".
^ Select the desired submenu and
confirm with "OK".
The selected options in the submenus
are marked with a check L.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Time of day Y
Gel
When using gel detergent, salt and
This selection allows the clock to be
shown as 24 or 12 hours. The clock can rinse aid should be added for best
also be set from here.
results. See "Filling the salt container"
and "Rinse aid" for more info. The rinse
aid refill message is activated.
Setting the clock format
^ Select the desired clock format and
confirm with "OK".
Tab
If the "Tab" indicator is lit than the
program sequence is adapted to suit
detergents than contain rinse aid and
salt (as well as other components
where applicable).
The display changes to the time of day
setting.
Set the time of day
^ Set the hour and confirm with "OK".
Set the minutes and confirm.
The rinse aid dispenser and indicator
light are deactivated.
The display changes back to the
previous menu. To switch back to
"Settings J" - select Back.
Follow the instructions of the detergent
manufacturer.
The cleaning and drying
performance of these detergent
products vary.
Detergent z
To achieve best results the used
detergent can be set on your
dishwasher. The selections available
are "Powder", "Gel" and "Tab". The
program cycle sequence will be
adjusted for the selected detergent.
Depending on the program the
program running time could increase.
The detergent selection is set by
default to "Powder" detergent.
^ Select the desired detergent and
confirm with "OK".
Powder
When using powder detergent, salt and
rinse aid must be added for best
results. See "Filling the salt container"
and "Rinse aid" for more info. The rinse
aid refill message is activated.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Water hardness
°d
gr/gal
Setting in display
The water hardness level set can be
viewed under the submenu "Water
hardness".
1
2
1
2
1
2
3
3
3
4
4
4
^ Press "OK" to return to
5
5
5
the "Settings J" menu.
6
6
6
7
7
7
To reset the water hardness see
8
8
8
"Settings J - External water softener".
9
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-45
46-60
61-70
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38-46
47-62
63-73
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
45
60
70
External water softener
Set the dishwasher to the hardness of
your local water supply (see "Before
using for the first time").
If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, set the
dishwasher to the water hardness of the
external water softener.
^ Select the water hardness setting
using e, confirm with OK.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Rinse aid
Filter check h
For best results the rinse aid dosage
can be adjusted.
This selection allows you to set the
number of cycles run before the filter
check message shows.
The dosage can be set between 0 and
6 ml.
You can select between 30 and 60
cycles.
The dosage set by default to 3 ml of
rinse aid per program.
The filter check message is set by
default to 40 cycles.
– Use a higher setting if spots appear
on dry glassware.
^ Select the desired number of cycles
and confirm with "OK".
– Use a lower setting if streaking
appears on dishes or glasses.
^ See "Cleaning and Care - Triple filter
system" for more information.
^ Select the desired rinse aid amount
and confirm with "OK".
Adjust Sensor Wash
The "Sensor Wash" program can be
adjusted to clean stubborn but normal
soiling.
^ Select Yes and confirm with "OK" .
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Reorganize program list k
b
k
Back
-
The order of the programs in the
program list can be reorganized. The
three most frequently used programs
can be saved to the first three
positions.
1. Starch/Cheese
2. China & Crystal
e
^ Reorganize another program or
switch back to "Settings J" with
Back.
b
k
Back
-
1. Normal
Save options Ö
2. China & Crystal
e
Additional options can be selected for
some programs, e.g. extended drying.
See "Use - Selecting options".
^ Select from the first three programs
the one, which you would like
removed from the top three..
Save options allows you to save the
selected options for future use of the
program.
^ Confirm with "OK".
b
j
Economy
-
e
This function is turned off by default.
Starch/Cheese
SaniWash
^ Select the desired setting and
confirm with "OK".
^ Select the program to be saved to
the position of the previously
selected program.
^ Confirm with "OK".
The reorganizing is confirmed and the
new order of programs is shown.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Child Safety Lock X
Temperature |
The Child Safety Lock protects the
dishwasher from misuse.
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
If the dishwasher is turned on while the
Child Safety Lock is activated, the
display shows X Machine locked.
The temperatures are shown in
°C/Celsius by default.
^ Select the desired temperature unit
and confirm with "OK".
The lock must be deactivated before
the dishwasher can be used.
As long as the Child Safety Lock is
activated, the dishwasher is locked
every time it is turned on.
The function is turned off by default.
^ Select On and confirm with "OK".
Unlocking the dishwasher
^ Turn the dishwasher on.
The message Machine locked shows.
^ Press the "OK" button.
Child Safety Lock
Cancel?
Yes
No
^ Select Yes and confirm with "OK".
The dishwasher is unlocked and ready
to use.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Buzzer O
Buzzer volume
When the buzzer is activated, a tone
Two buzzer volumes can be selected or
sounds at the end of a program and if a the buzzer can be turned off.
fault occurs.
Off
The buzzer at the end of a program is
The buzzer tone at the end of a
turned on by default.
program is turned off.
Soft
Buzzer at the end of a program
The tone sounds in a soft volume.
Loud
The buzzer at the end of a program
sounds five times in intervals with a brief
break in between. The buzzer sounds up
to one hour if the dishwasher in not
turned off.
The tone sounds in a loud volume.
^ Select the desired volume or
deactivate the buzzer.
Buzzer in case of a fault
^ Confirm with "OK".
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be set
to off.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Button tone
Memory V
A tone will sound when a button is
pressed.
The memory function allows you to save
the last selected program.
The volume can be set to seventeen
different levels. It is set to level 8 by
default.
When turning the dishwasher off and on
again after a program has finished or
opening and closing the door, the last
selected program is displayed instead
of the main menu.
^ Select the desired setting and
confirm with "OK".
The function is turned on by default.
Brightness
^ Select the desired option and confirm
with "OK".
The display brightness can be adjusted
in 17 levels.
RemoteVision
The brightness is set to level 9 by
default.
(Optional accessory.
To learn more about RemoteVision
visit www.miele.com.)
^ Select the desired brightness and
confirm with "OK".
^ Select e to show module state.
Contrast
If "K module connected and ready" is
displayed, no further action is required.
The display contrast can be adjusted in
17 levels.
Via the "Options" menu you can:
– Reboot the module
The contrast is set to level 9 by default.
^ Select the desired contrast and
confirm with "OK".
– Reset the factory default settings
– Enter Ad-Hoc mode
Refer to the "RemoteVision" section
of this manual or the RemoteVision
Installation manual for further
instructions.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Dealer =
Turning the demo mode on
^ Select the desired option.
Demo modes are only for
showrooms.
^ Confirm the following messages with
"OK".
The dishwasher has three demo
programs for showrooms.
^ Press any button to start the selected
demo mode.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
^ To cancel the demo mode press any
button again and confirm with "OK".
– Demo mode:
Turning the demo mode off
The program is started by pressing
any button. It runs once and must be
started again.
^ Select Off and confirm with "OK" .
The display changes into the menu
"Settings J".
– Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
Factory default {
All settings can be reset to the factory
default.
– Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
^ Select Reset and confirm with "OK".
Leaving the Settings menu
– Trade show mode:
Once the machine is used for the
first time this option is disabled in the
display.
^ Select Back and confirm with "OK".
The display changes to the program
menu.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
RemoteVision
Miele's RemoteVision Wi-Fi technology
creates a 'virtual link' between your
appliance and our monitoring center. If
a fault occurs, Miele's client service
center will be notified and contact you,
or another trusted individual identified
on your call roster, in order to gain
access to your appliance to fix the
problem.
Be sure your wireless system meets the
following requirements
– A wireless router that supports an
IEEE 802.11b protocol
– Windows XP® or newer operating
system, Mac® OS X 10.3 or higher
– Cable or DSL modem
– Microsoft® Internet Explorer 6 or
higher, Safari 2.0 or higher, Firefox
1.5 or higher
For information on set-up and
installation of the RemoteVision module,
see the separate RemoteVision
installation manual.
* Please note that each wireless router
manufacturer supplies their own
device drivers and setup programs.
Due to the differences in
manufacturers, exact router setup
instructions are not included in this
manual. Wording and instructions
may vary.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
Possible fault
Solution
After the dishwasher was The machine is not Insert the plug.
turned on with s, the
display stays off and the
"Start" indicator does not
flash.
plugged in.
The fuse has
tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The dishwasher stops
during a program.
The fuse has
tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The buzzer sounds.
The display shows the
following:
There may be a
technical fault.
Turn the dishwasher off s.
After a few seconds:
– Turn the dishwasher on.
Technical fault FXX
– Select the desired program
with the program selection
buttons.
Call Technical Service
– Press the "Start" button.
If the problem persists, call
Technical Service.
The buzzer sounds.
The display shows the
following:
The waterproof
system has
activated.
– Turn off the water supply.
– Contact Miele Technical
Service.
Fault
Waterproof F70
Close water faucet
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems water intake/drain
Issue
Possible fault
Solution
The buzzer sounds.
The display shows the
following:
Water intake
The water supply is
Open the water supply all the
way.
Open water faucet
closed.
Fault
Before fixing the fault:
Water intake FXX
– Turn the dishwasher off s.
Fault F12/F13:
Fault in the water
intake.
– Open the water supply all the
way and restart the program.
– Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
The buzzer sounds. The The intake water does not – Restart the program.
program "Energy Saver" have a minimum
– If the fault is displayed
displays the fault:
temperature of 115°F
again use a different
program.
Water intake temp. too low (45°C). See "Plumbing -
Connection to the water
supply".
The buzzer sounds. The
display shows the
following:
Before fixing the fault:
– Turn the dishwasher
off s.
Fault FXX
Fault F11: Fault in the
– Clean the triple filter.
Drain
water drain. There might
be water in the wash
cabinet.
– Clean the drain pump
and the non-return
valve.
See "User Maintenance
Instructions" for more
information on the above.
– Remove any kinks in
the drain hose.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Issue
Possible fault
Solution
The display turns off. The display and the
program selector go
Press any button.
The display turns on again.
into "Standby" mode to
save energy.
The display shows the The middle or lower
Open the dishwasher door
and rearrange items blocking
the spray arms.
following:
spray arm is blocked
Middle spray arm blocked by dishware.
or
The spray arm jets of
– Turn the dishwasher off s.
Lower spray arm blocked
the middle or lower
spray arm are clogged.
Then:
– Clean the spray arms. See
"User Maintenance
Instructions".
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Detergent is left in the
The dispenser was
Dry the dispenser before
adding detergent.
dispenser at the end of a damp when
program. detergent was
added.
The detergent lid cannot Detergent residue is Remove the residue.
be closed properly. blocking the catch.
The door and the interior This is not a fault. It is The moisture will evaporate
walls are still wet after a the normal operating after a short time.
program has finished.
mode of the drying
system.
Water remains in the
wash cabinet at the end
of a program.
Before fixing the fault:
– Turn the dishwasher off s.
The triple filter in the Clean the triple filter. See
wash cabinet is
clogged.
"User Maintenance
Instructions".
The drain pump or
Clean the drain pump and
the non-return valve non-return valve, see "User
may be blocked.
Maintenance Instructions".
The drain hose is
kinked.
Remove any kinks from the
drain hose.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Issue
Possible fault
Solution
There is a knocking
noise in the wash
cabinet.
The spray arm is hitting an Interrupt the program,
item in the basket. rearrange items blocking
the spray arms.
Items are not secure in the Interrupt the program and
There is a rattling
noise in the wash
cabinet.
wash cabinet.
rearrange loose pieces.
There is a knocking
noise in the water
pipes.
This may be caused by
the installation or the
diameter of the pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Issue
Possible fault
Solution
The dishes are not The dishes were not loaded See "Loading the
clean.
correctly.
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Stubborn but normal soiling Use the function "Adjust
(e.g. coffee, tea).
Sensor Wash". See
"Settings J - Adjust Sensor
Wash".
Not enough detergent was
dispensed.
Use more detergent, see
"Adding detergent".
The spray arms are blocked. Turn the spray arm and
rearrange the dishes if
necessary.
The triple filter is clogged or Clean the filter and insert it
not correctly inserted. The
spray arm jets might be
clogged.
correctly, see "User
Maintenance Instructions".
The drain pump or the
Clean the drain pump and
non-return valve is blocked. the non-return valve, see
Wash water will run back maintenance instructions.
into the wash cabinet.
The rinse aid dosage is set Reduce the dosage, see
too high. "Before using for the first
time".
Glasses and
cutlery show
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and cutlery too low, or the rinse aid
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
are spotted.
reservoir is empty.
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
A "Tab" product was used.
Set the Detergent setting for
These products have a low a normal (powder or gel)
drying effect.
detergent and add rinse aid.
Set the Detergent setting to
The "Tab" setting is turned
on, but a normal (powder or the detergent used, see
gel) product was used.
"Additional options - Tab".
White residue is
visible on cutlery
and dishes.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
Clouding occurs on
glassware and film
can be wiped off.
The salt container is empty. Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on.
Reseat it making sure it
screws back on correctly.
Unsuitable "Tab" products
were used.
Change detergent, use
normal (powder or gel)
detergent.
The water softener is
programmed on too low a
setting.
See "Before using for the
first time".
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Glasses are
Detergent deposits.
Use a different detergent.
discolored and the
film cannot be wiped
off.
Clouding or etching Possible causes may be : See the relevant section of
on glasses.
excessive rinse aid,
incorrect water hardness
level set, type and amount
of detergent,.
this manual to:
– adjust the rinse aid
dosage,
– adjust the water hardness
level,
Any one or a combination
of these faults may be to
blame.
– change the type and/or
adjust the amount of
detergent used,
– connect the dishwasher to
a cold water supply.
Glasses are dull and Glasses are not
discolored, film dishwasher safe.
cannot be wiped off.
There is no remedy. Only
wash dishwasher safe
glasses in the dishwasher.
Tea or lipstick stains The wash temperature of Select a program with a
have not been the selected program was higher temperature.
completely removed. too low.
The detergent has a low
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
vegetables may be the
cause. Not enough
Use more detergent, see
"Adding detergent".
Discoloration is permanent.
detergent was used to
break down natural dyes.
There are rust stains The affected items are not There is no remedy. Only
on cutlery. corrosion resistant. wash dishwasher safe cutlery
in the dishwasher.
No program was run after Start the "Express" program
refilling salt. Salt residuals (with the "Turbo" option)
got in the wash cycle. without a load after refilling
salt.
The salt container lid was Reseat and screw the lid on
not screwed on properly. firmly.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Comparison Tests
10 place settings, Standard program: Normal
Upper basket
Lower basket
Cutlery tray
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Comparison Tests
16 place settings, Standard program: Normal
Upper basket
Lower basket
Cutlery tray
58
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
(USA only)
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
^ Please quote the model type and
number of your appliance.
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Check and clean your dishwasher
regularly. This will help avoid
problems and faults.
^ Only use a conditioner suitable for
your kitchen cabinetry.
^ Clean wood only with a damp cloth
and wipe dry.
,Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonia based cleaners should not
be used on the dishwasher.
Clean the exterior with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
They will damage the surface.
Wash cabinet
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Door and the door seal
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
– cleaners containing descaling
agents or lime removers,
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside of
the wash cabinet and are not cleaned
by water from the spray arms.
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
Control panel
^ The plastic control panel should only
be wiped with a damp cloth or
suitable cleaning agent designed for
use on plastic.
– metal scrapers.
, The appliance front and controls
are not scratch proof.
Remove spills immediately.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
Cleaning the triple filter
The triple filter system in the base of the ^ Turn off "K" the dishwasher before
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones). During normal use, the
filter system is self-cleaning.
cleaning.
,The machine must not be used
without all the filters in place!
^ Check and clean the filter system
periodically for any trapped or
foreign objects.
The level of soiling and time it takes
before the filters need cleaning will vary
depending on your household usage.
^ Turn the handle counterclockwise to
release the triple filter system, a.
The display shows W Check filter after
40 wash cycles (default setting).
^ Remove the triple filter from the
machine. Clean any solid particles
and rinse under running water. Scrub
with a nylon brush if necessary.
The filter check frequency can be
set from 30 to 60 cycles. See
"Settings J - Filter check".
^ Check and clean the triple filter.
^ Confirm with "OK".
The display changes to the program
menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the underside of the filter the
flap must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
the flap b.
^ Lock the filter by turning the handle
clockwise.
^ Rinse under running water.
The triple filter system must be inserted
and locked. Large particles could get in
the circulation system and cause a
blockage.
^ Close the flap so that the clip
engages.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check that
they rotate freely.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
,The plastic housing of the water
connection contains electrical
wiring.
Do not cut the intake hose or
submerge it in liquid.
^ Carefully remove the rubber seal.
Installing an in-line water filter
^ Remove the filter using needle nose
pliers and rinse it under running
water.
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
filters can be purchased from Miele.
^ Reinsert the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
Cleaning the filter
^ Turn off the dishwasher and pull the
plug.
^ Slowly turn on the water supply and
test for leaks.
^ Turn off the water supply.
^ Unscrew the intake hose.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a cup or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
To comply with IEC sound testing protocols, please contact Miele for additional
instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Help to protect the environment
Disposal of the packing
material
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
V 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Waterproof system
– The water inlet hose comes equipped
with a 3/4" female hose thread
All Miele dishwashers have a safety valve
located on the incoming water line and a
sealed underside with a water sensor.
If a fault occurs, the water intake is
connector. This can be directly
connected to a water supply with 3/4"
MHT (male hose thread ends).
stopped and the drain pump is activated. – Water pressure: Must be between 4.5 -
145 psi (0.3 - 10 bar).
If the water pressure is lower, the
Connection to the water supply
display shows Water intake
see "Frequently asked questions".
,Do not drink water from the
With high water intake pressure, a
dishwasher!
reducing valve must be used.
– The dishwasher can heat its own water
,To prevent damage to the
dishwasher, it must only be
wash program. This allows for
to the temperature required by the
connected to a fully vented drainage
system.
connection of the machine to either a
hot or cold water source. For lowest
energy consumption connect the
dishwasher to a cold water source. For
fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot water
source. All programs use hot water in
the rinse cycles.
– To use the "Energy Saver" program, a
hot water connection of minimum
115°F / 45°C and maximum 140°F /
60°C (water intake temperature) is
necessary.
The higher the water intake
temperature, the better the cleaning
and drying results.
Do not cut the intake hose. It contains
electrical wiring. If the hose is cut, the
dishwasher will not work. There will be
a water leak and you could be injured.
If the hose is too long, coil it neatly
and place it behind the machine.
– The inlet hose is approximately 5 ft.
(1.5m) long.
– A 5 ft. (1.5m) drain extension is
available from Miele.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
Venting the drainage system
– The machine comes equipped with a If the dishwasher drain hose is
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
^ Open the dishwasher door and
remove the lower basket.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
^ Pull the lower spray arm firmly
upwards to remove.
– If the hose is to be directly fitted to
the drainage outlet on site, use the
supplied hose clip (see assembly
plan).
– The hose can be installed to the left
or right side.
– The existing drain pipe for the drain
hose is designed for various hose
diameters. The drain pipe must be
shortened if the drain pipe extends
too far into the drain hose. The drain
hose could get clogged.
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
– The drain hose must not be
shortened.
,Make sure the hose is installed
without kinking, pressure or being
pulled.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 1911
G 2732
M.-Nr. 07 724 110 / 02
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|