Wireless G
Ethernet Adapter
Connect your
gaming console or
Ethernet-equipped
PC to a FASTER
wireless network
Mbps
802.11g
2.4GHz • Wireless
F5D7330uk
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
Thank you for purchasing the Belkin 802.11g Wireless Ethernet Adapter
(the Adapter). Now you can take advantage of this great new technology
and gain the freedom you need around the home or office without using
cables. The 802.11g Wireless Ethernet Adapter works like a conventional
network card, but without the wires. The easy installation and setup will
have you networking wirelessly in minutes.
To get the most out of your Wireless Ethernet Adapter, please be sure to
read carefully through this User Manual, and pay special attention to the
section entitled “Placement of your Wireless Networking Hardware for
Optimal Performance” below.
By following our simple setup instructions, your Belkin Home Network will
allow you to:
•
•
Share one high-speed Internet connection with all the computers in
your home
Share resources, such as files, and hard drives among all the
connected computers in your home
•
•
•
•
Share a single printer among the entire family
Share documents, music, video, and digital pictures
Store, retrieve, and copy files from one computer to another
Simultaneously play games online, check Internet e-mail, and chat
•
Mobility – you no longer need a dedicated “computer room”—now
you can work on a networked laptop or desktop computer anywhere
within your wireless range
•
•
•
Easy installation – Belkin Easy Installation Wizards make setup
simple
Flexibility – set up and access printers, computers, and other
networking devices from anywhere in your home
Easy Expansion – the wide range of Belkin networking products let
you expand your network to include devices such as printers and
gaming consoles
•
•
No cabling required – you can spare the expense and hassle of
retrofitting Ethernet cabling throughout the home or office
Widespread industry acceptance – choose from a wide range of
interoperable networking products
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Your wireless connection will be stronger the closer your computer is to
your Wireless Router (or Access Point). Typical indoor operating range
for your wireless devices is between 100 and 200 feet. Your wireless
connection speed and performance will degrade somewhat as the distance
between your Wireless Router (or Access Point) and connected devices
increases. This may or may not be noticeable to you. Factors that can
weaken signals simply by getting in the way of your network’s radio waves
are metal appliances or obstructions, and walls.
To test whether performance issues are related to range or obstruction
factors, try moving the computer to a position between five and ten feet
from the Wireless Router or Access Point. If difficulties persist even at
close range, please contact Belkin Technical Support.
Note: While some of the factors suggested below can affect network
performance negatively, they will not prohibit your wireless network
from functioning. In fact, you may not notice any problem at all. If
you are concerned that your network is not operating at its maximum
effectiveness, this checklist may help.
1. Placement of your Wireless Router or Access Point
Place your Wireless Router (or Access Point), the central connection
point of your network, as close as possible to the center of your wireless
network devices.
To achieve the best wireless network coverage for your “wireless clients,”
(i.e. computers enabled by Belkin Wireless Notebook Network Cards,
Wireless Desktop Network Cards, and Wireless USB Adapters):
•
Ensure that your Wireless Router’s (or Access Point’s) networking
antennas are parallel to each other, and are positioned vertically
(pointing toward the ceiling). If your Wireless Router (or Access Point)
itself is positioned vertically, point the antennas as much as possible
in an upward direction.
•
•
In multistory homes, place the Wireless Router (or Access Point) on a
floor that is as close to the center of the home as possible. This may
mean placing the Wireless Router (or Access Point) on an upper floor.
Try not to place the Wireless Router (or Access Point) near a cordless
2.4GHz phone.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
2
3
4
5
6
7
8
2. Avoid Obstacles and Interference
Avoid placing your Wireless Router (or Access Point) near devices that
may emit radio “noise”, such as microwave ovens. Dense objects that can
inhibit Wireless communication can include:
•
•
•
•
•
Refrigerators
Washers and/or dryers
Metal cabinets
Large aquariums
Metallic-based UV tinted windows
If your wireless signal seems weak in some spots, make sure that objects
such as these are not blocking the signal’s path between your computers
and Wireless Router (or Access Point)
3. Cordless Phone Placement
If the performance of your wireless network is impaired after attending
to the above issues, and you have a cordless phone:
•
Try moving cordless phones away from Wireless Routers (or
Access Points) and your wireless-enabled computers
•
Unplug and remove the battery from any cordless phone that
operates on the 2.4GHz band (check manufacturers information).
If this fixes the problem, your phone may be interfering.
•
•
If your phone supports channel selection, change the channel on
the phone to the furthest channel from your wireless network, as
possible. For example, change the phone to channel 1 and move
your Wireless Router (or Access Point) to channel 11. See your
phone’s user manual for detailed instructions.
If necessary, consider switching to a 900MHz or 5GHz cordless
phone.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
4. Choose the “quietest” channel for your wireless network
In locations where homes or offices are close together, such as apartment
buildings or office complexes, there may be wireless networks nearby that
can conflict with yours. Use the Site Survey capabilities of your Wireless
LAN Utility to locate any other wireless networks, and move your Wireless
Router (or Access Point) and computers to a channel as far away from
other networks as possible.
Experiment with more than one of the available channels, in order to find
the clearest connection and avoid interference from neighboring cordless
phones or other wireless devices.
For more Belkin wireless networking products, use the detailed Site Survey
and wireless channel information included in your User Guide.
For more information regarding our networking products, visit our website
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
The Adapter complies with the IEEE 802.11g standard in order to
communicate with other 802.11b and 802.11g-compliant wireless devices
at 11Mbps and 54Mbps. 802.11g products run at speeds of up to 54Mbps
and operate on the same 2.4GHz frequency band as 802.11b Wi-Fi
products.
•
•
•
2.4GHz ISM (Industrial, Science, and Medical) band operation
Integrated easy-to-use Wireless Ethernet Adapter Utility
Wireless interface compliance with the IEEE 802.11g standard
products
•
Ethernet interface, for operation in virtually all Ethernet-equipped
computers
•
•
•
64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption
Wireless access to networked resources
Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking
modes
•
•
•
•
•
•
Data rate of up to 54Mbps
Supports 54, 48, 36, 24, 18, 12, 9, or 6 Mbps rates (802.11g)
Supports 11, 5.5, 2, or 1Mbps rates (802.11b)
Easy installation and use
External antenna
LED power, network link, and wireless indicators
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
•
Wireless roaming around the home or office
Offers the freedom of networking without cables
•
Connection rates of up to 54Mbps
Provides immediate, higher-speed wireless connectivity at home,
work, and hot spot locations without compromising the use of existing
802.11b products
•
•
•
•
Compatibility with 802.11b products
802.11g wireless LAN solutions are backward-compatible with existing
Wi-Fi (IEEE 802.11b) products and with other 802.11g products
Difficult-to-wire environments
Enables networking in buildings with solid or finished walls, or open
areas where wiring is difficult to install
Frequently changing environments
Adapts easily in offices or environments that frequently rearrange or
change locations
Temporary LANs for special projects or peak time
Sets up temporary networks, (such as at trade shows, exhibitions and
constructions sites), on a short-term basis; also companies who need
additional workstations for a peak activity period.
•
SOHO (Small Office/Home Office) networking needs
Provides the easy and quick, small network installation SOHO users
need.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
1
2
3
4
5
6
7
8
Standards:
IEEE 802.11g, IEEE 802.11b, IEEE 802.3u,
IEEE 802.3
Wireless:
Radio Technology
Data Rate
Direct Sequence Spread Spectrum (DSSS)
802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
802.11b: 11, 5.5, 2, 1Mbps
Modulation
802.11g: OFDM 802.11b: CCK, DQPSK,
DBPSK
Operating Frequency
Operating Channels
2.412-2.497GHz ISM band
802.11g: 11 for North America, 14 for Japan,
13 for Europe 802.11g: 11 for North America,
13 for Japan, 13 for Europe
Security
64-bit WEP, 128-bit encryption
CSMA/CD, TCP, IP, UDP, AppleTalk®
Software & Browser-based
Protocol Supported:
Management:
Ports:
1-10/100Base-T RJ45 port
1-power jack
1-reset button
•
Computing device such as a computer (PC and Mac®) or any device
with an available Ethernet port
•
(Installation Wizard) Windows® 98SE, Me, 2000, XP
•
•
•
•
•
Belkin Wireless G Ethernet Adapter
Quick Installation Guide
Installation Software CD
User Manual
Ethernet Cable
7
Download from Www.Somanuals.com. All Manuals Search And Download.
(a)
(b)
(c)
(a) Power Link LED
Solid:
Adapter is ON
Adapter is OFF
Off:
(b) Ethernet Link LED
Solid:
Off:
Connected to Ethernet
Ethernet disconnected
Transferring data
Blinking:
Green:
10Mbps device connected
100Mbps device connected
Amber:
(c) WAN Link LED
Solid:
Wireless card is ON
Blinking:
Off:
Transferring data wirelessly
Wireless card in OF
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Install the Hardware
1. Connect the included Ethernet network cable into the LAN port
on the back of the Wireless G Ethernet Adapter and plug the
other end of the cable to the back of your computer or any
other Ethernet-enabled device.
4
4
5
6
7
8
2. Turn on your Adapter by connecting the power supply cable to
your Adapter. Then plug the other end into a power outlet.
3. If used for Internet gaming play, the Adapter will work out-of-
the-box in most instances. In cases where you need to set up
the Adapter for head-to-head play or special settings, you need
to run the setup wizard from a PC or configure it using a web-
based setup. Non-Windows users, please refer to the “Setting
Up your Computer to Use Web-Based Setup” on page 16 of
this manual.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: Your Adapter should work out-of-the-box. You only need to
run the Wizard for special settings such as head-to-head play or wireless
security.
1. Insert the CD into your CD-ROM drive.
2. The “Wireless Ethernet Adapter Setup Wizard” screen should
automatically appear.
Note: If the Easy Setup Wizard does not start up automatically, select
your CD-ROM drive from “My Computer” and double-click on the file
named “Setup” on the CD-ROM.
3. The Wizard will start. Click “Setup” to proceed.
4. Ensure the Adapter is connected to your network correctly and click
“Next”.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
1
2
3
4
5
6
7
8
5. Select the Adapter you wish to set up and click “Next”.
6. Leave the password blank and click “Next” to continue for initial
setup.
Note: If this is not your first time setting up this Adapter and you
already were assigned a password, enter your password and click
“Next”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
7. Your Adapter ships with no password entered. You can set the
password now or make no changes to the password field to keep your
password blank. Click “Next” to continue.
8. Select “Access point” or “Ad-Hoc” and click “Next” to continue.
a. Access Point:
When this option is selected, the Adapter will attempt to connect
to an available network (wireless router or access point) in the
area.
b. Ad-Hoc (Computer-to-Computer):
When this option is selected, the Adapter will attempt to connect
to an available computer or device in the area that’s also
using (Ad-Hoc). Access points will be excluded from the list of
available networks when this option is selected.
a
b
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
1
2
3
4
5
6
7
8
9. Enter the settings for the wireless network that you will be connecting
to. The default SSID of “ANY” will connect your Adapter to the closest
network automatically. After you finish entering the settings, click
“Next” to continue.
a. SSID:
The SSID is the wireless network name. This field lets you type
in the network name (SSID) you want this Adapter to connect
to. For instance, if the name (SSID) of the wireless network that
you will be connecting to is “belkin54g”, enter “belkin54g” in the
SSID field.
b. Channel:
If you chose to connect in Ad-Hoc mode, you will need to
specify the channel number.
c. Device (Adapter) Name:
Enter a name for this Adapter.
a
b
c
10. Enter the IP address settings for your Adapter. The current settings
will usually work. Click “Next” to continue.
Warning: It is recommended that you only make changes to this page
if you have a specific reason to do so.
a. IP address:
IP address must be unique to your network. Default IP address is
192.168.2.225.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
b. Subnet Mask:
The Adapter’s Subnet Mask must be the same as your network’s
subnet mask.
c. Router:
Enter the IP address of your network’s gateway (also known as
router).
a
b
c
11. From the Encryption drop-down menu, select “Disabled”, “64-bit”,
or “128-bit” according to your wireless network’s setting. Select
“Disabled” if you have not configured your wireless network to use
encryption. All wireless devices on your network must share the same
network key. Click “Next” to continue.
a. Encryption:
There are two types of encryption to choose from: 64-bit and
128-bit. Using encryption will make your network more secure,
but will slow down the network performance. Although network
performance will be reduced, it is likely the change will not be
detectable to users of the network.
b. Network Key:
Enter a network key only if you have encryption enabled in your
wireless network. Type your WEP key in the Network Key box
using passphrase or hex key format. All wireless devices on your
network must share the same network key.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
1
2
3
4
5
6
7
8
c. Passphrase:
For 64-bit encryption, your key lengths will be five characters
(ASCII text). For 128-bit encryption, your key length will be 13
characters (ASCII text).
d. Hex Key:
For 64-bit encryption, your key lengths will be 10 hexadecimal
characters. For 128-bit encryption, your key length will be 26
hexadecimal characters.
a
c
b
d
12. Confirm all your settings are correct then click “Finish”.Setup is
complete.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Adapter Using the Setup Wizard
13. You can now connect the Adapter to any Ethernet-equipped device on
your wireless network
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
Setting up your computer to use the Web-Based User Interface
The default IP address of the Adapter is 192.168.2.225. You will need to
set your computer’s IP address to the same subnet such as 192.168.2.224
before you can access the Web-Based Setup Interface. Perform the
following steps from Windows 98SE, Me, 2000, or XP:
1. Go to the Windows Control Panel and double-click on the Network
icon or the Network Connections icon.
2. Right-click on the Local Area Connection for your Wireless Adapter
and select “Properties”.
3. In the General tab, select the Internet Protocol TCP/IP settings for
your Wireless Adapter and click on “Properties”.
4. Select the “Use the following IP address” radio button.
5. Enter an IP address in the same subnet as the access point (for
example, 192.168.2.224).
6. Enter the following subnet mask: 255.255.255.0 then click “OK”.
Warning: Once you have completed configuring your Adapter, you must
repeat steps 1 through 3 above and select “Obtain an IP automatically” or
set a valid IP for your computer on the same subnet as the network you
are connecting to.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
Connecting the Adapter
Using your Internet browser, you can access the web-based user interface.
In your browser, type “192.168.2.225” (do not type in anything else such
Logging into the Web-Based Setup
You will see the Web-Based Setup home page in your browser window.
The home page is visible to any user who wants to see it. To make any
changes to the Adapter’s settings, you have to log in. Clicking the Login
button or clicking on any one of the links on the home page will take you
to the login screen. The Adapter ships with no password entered. In the
login screen, leave the password blank and click “Submit” to log in.
Logging Out of the Web-Based Setup
One computer at a time can log in to the Adapter for the purposes of
making changes to the settings of the Adapter. Once a user has logged in
to make changes, there are two ways that the computer can be logged out.
Clicking the Logout button will log the computer out. The second method
is automatic. The login will time out after a specified period of time.
Understanding the Advanced Web-Based User Interface
The home page is the first page you will see when you access the Web-
Based User Interface (UI). The home page shows you a quick view of the
Adapter’s status and settings. All setup pages can be reached from this
page.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
1
2
3
4
5
6
7
8
Status
(a)
(b)
(c)
(d)
(a) Quick Navigation Links
You can go directly to any of the pages by clicking directly on these links.
The links are divided into logical categories and grouped by tabs to make
finding a particular setting easier to find.
(b) Version Information
Shows the firmware version, boot-code version, and hardware version.
(c) LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the
Adapter. Changes can be made to the settings by clicking the Quick
Navigation links on the left side of the screen.
(d) WLAN Settings
Shows the status of the Adapter’s wireless setting. Changes can be made
to the settings by clicking the Quick Navigation links on the left side of the
screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
Adapter Settings
(a)
(b)
(c)
(d)
(e)
(i)
(j)
(f)
(g)
(h)
(k)
(l)
(a) Bridge (Adapter) Name:
Enter the name of your Wireless Ethernet Adapter here.
(b) IP Configuration:
•
•
Manually set the Adapter’s IP address - The default IP address of
your Adapter is 192.168.2.225. You can modify it to match your
network subnet if needed. For example, if your network subnet is
under 192.168.1.xxx, then you can configure the Adapter to use
192.168.1.225.
Obtain an IP address from a DHCP server - If you have a DHCP
server or a router in your network, you can choose to “obtain an
IP address automatically from a DHCP server”. The IP address of
your Adapter might change after selecting this option.
(c) IP Address:
IP address must be unique to your network. Default IP address is
192.168.2.225.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
1
2
3
4
5
6
7
8
(d) Subnet Mask:
The Adapter’s subnet mask must be the same as your network’s subnet
mask.
e) Gateway IP Address
Enter the IP address of your network’s gateway (also known as router).
(f) SSID
The SSID is the name of your wireless network. This field lets you type
in the network name (SSID) you want this Adapter to connect to. For
instance, if the name (SSID) of the wireless network that you will be
connecting to is “belkin54g”, enter “belkin54g” in the SSID field. The
default SSID of “ANY” will connect your Adapter to the closest network
automatically. You can also click the Site Survey button to see available
networks around you.
(g) Mode
•
Infrastructure – When this option is selected, the Adapter will
attempt to connect to an available network (access point) in the
area.
•
Ad-Hoc (Computer-to-Computer) – When this option is selected,
the Adapter will attempt to connect to an available computer or
device in the area that’s also using (Ad-Hoc). Wireless Routers
and Access Points will be excluded from the list of available
networks when this option is selected.
(h) Channel
If you connect in Ad-Hoc mode, you will need to specify the channel
number. All computers in the network need to use the same channel.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
Adapter Settings (con’t)
(a)
(b)
(c)
(d)
(e)
(i)
(f)
(j)
(g)
(h)
(k)
(l)
(i) WEP Encryption
From the Encryption drop-down menu, select “none”, “64-bit”, or “128-bit”
according to your wireless network’s setting. Select “none” if you have not
configured your wireless network to use encryption. All wireless devices
on your network must share the same network key. There are two types of
encryption to choose from: 64-bit and 128-bit. Using encryption will make
your network more secure, but will slow down the network performance.
Although network performance will be reduced, it is likely the change will
not be detectable to users of the network.
(j) Authentication Mode
This setting allows the Adapter to authenticate communication with the
wireless devices in your network. With “Shared only” mode, all wireless
devices must have the same WEP keys so that all wireless devices can
authenticate each other and start transmitting data.
The default “Open + Shared” setting will automatically detect whether a
wireless device is set to “Open” or “Shared Key” and transmit data using
the appropriate authentication type. You will need to select “Shared only”
mode if your wireless network is also set to “Shared only” mode.
(k) Key ID:
Select the network key (1-4) that will be used to authenticate.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
1
2
3
4
5
6
7
8
(l) Network Key:
Enter a network key only if you have encryption enabled in your wireless
network. Type your WEP key in the Network Key box using passphrase or
hex key format. All wireless devices on your network must share the same
network key.
•
Passphrase - For 64-bit encryption, your key lengths will be five
characters (ASCII text). For 128-bit encryption, your key length
will be 13 characters (ASCII text).
•
Hex Key - For 64-bit encryption, your key lengths will be 10
hexadecimal characters. For 128-bit encryption, your key length
will be 26 hexadecimal characters.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
Site Survey
(b)
(a)
(c)
(a) SSID
The SSID is the wireless network name.
(b) Refresh
Clicking the Refresh button will give you the most up-to-date data.
(c) Join
You can connect to a specific wireless network by selecting the check box
and click “Apply Changes”.
Restart Wireless Adapter
You can restart your Wireless Adapter without losing any of your
configuration settings by clicking “Restart Wireless Adapter”.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
1
2
3
4
5
6
7
8
Restore Factory Defaults
Clicking “Restore Defaults” will erase all your current settings.
Save Current Settings
You can save your current configuration by using this feature. Saving your
configuration will allow you to restore it later if your settings are lost or
changed. It is recommended that you back up your current configuration
before performing a firmware update.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
Restore Previous Settings
This option will allow you to restore a previously saved configuration.
Firmware Update
From time to time, Belkin may release new versions of the Adapter’s
firmware. Updates contain improvements and fixes to problems that may
have existed. For the latest firmware, go to the support section of www.
belkin.com/networking.
a. Browse:
Clicking on “Browse” will open a window that allows you to select the
location of the firmware update file.
b. Upgrade:
Clicking on “Upgrade” will update your Adapter to the latest firmware.
(a)
(b)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web-Based User Interface
1
2
3
4
5
6
7
8
Password
The Adapter ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you need
to log into the router in the future.
Login Timeout
The login timeout option allows you to set the period of time that you
can be logged into the Adapter’s Web-Based Setup Interface. The timer
starts when there has been no activity. For example, you have made some
changes in the Web-Based Setup Interface, and then left your computer
alone without clicking “Logout”. Assuming the timeout is set to 10
minutes, then 10 minutes after you leave, the login session will expire. You
will have to log in to the Adapter again to make any more changes. The
login timeout option is for security purposes and the default is set to 10
minutes.
Note: Only one computer can be logged into the Adapter’s Web-Based
Setup Interface at one time.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
I can’t connect to a Wireless Network or Router
If you are unable to connect to the Internet from a wireless computer
and your adapter appears to be functioning properly, please check the
following items:
Look at the lights on your Wireless Router. If you’re using a Belkin
Wireless Router, the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
If your Belkin Wireless Router’s lights do not have the above
characteristics, please contact Belkin technical support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer’s user guide.
Check the network name (SSID) settings to see if they match. The
SSID is case-sensitive and the spelling on each computer must be
exactly the same in order for the adapter to connect to the Wireless
Router or Access Point. If security is enabled on the Wireless router or
Access Point, you will need to enter the encryption network key.
Note: to check the SSID settings, open an Internet browser and type
192.168.2.225 in the address bar to bring up the Adapter’s setup home
page. Click on Bridge Settings under the Settings menu to the left of
the window. The SSID setting is located under the Wireless Settings
status information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
1
2
3
4
5
6
7
8
Power LED does not come ON; Adapter is not working
If the LED indicators are not ON, the problem may be that the
Adapter’s power supply is not connected or installed properly.
Verify that the Adapter’s power supply is connected to the
power port on the Adapter and that the power supply is firmly
connected into a working power outlet.
Installation CD-ROM does not start Setup Utility
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD drive.
If the Setup Utility screen does not appear within 15-20
seconds, open up your CD-ROM drive by double-clicking on
the “My Computer” icon. Next, double-click on the CD-ROM
drive that the Installation CD has been placed in to start the
installation. Then, double-click on the icon named “setup.exe”.
Ethernet Link LED does not come ON
If the Ethernet Link LED does not come ON, the problem may be
that the Adapter is not connected or installed properly.
Verify that the Adapter’s Ethernet cable is plugged firmly into
the RJ-45 port of the Adapter and to your computer or gaming
console.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WAN Link LED is OFF; Cannot connect to a wireless network or
the Internet
If your Adapter appears to be functioning properly, but you cannot
connect to a network and the WAN link LED is OFF, the problem may
be that there is a mismatch between the network name (SSID) in your
wireless settings.
Check the SSID settings to see if they match. The SSID is case-
sensitive and the spelling on each computer must be exactly the same
in order for the adapter to connect to the Wireless Router or Access
Point. If the network has security (encryption) enabled, you will need to
enter the network key.
Note: To check the SSID settings, open an Internet browser and type
192.168.2.225 in the address bar to bring up the Adapter’s setup home
page. Click on Bridge Settings under the Settings menu to the left of
the window. The SSID setting is located under the Wireless Settings
status information.
WAN Link LED is solid but cannot connect to the Internet
If you have a signal but can’t get online or obtain an IP address, the
problem may be that there is a mismatch between the Encryption key
settings in your computer and Wireless Router or Access Point.
Check the WEP key settings to see if they match. The key is case-
sensitive and the spelling on each computer and Wireless Router or
Access Point must be exactly the same in order for the Adapter to
connect to the router. For more information about encryption please
go to page 21 of this manual.
If issues persist even at close range, please contact please contact
Belkin Technical Support.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
1
2
3
4
5
6
7
8
Data transfer is sometimes slow
Wireless Technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance
between devices increases. Other factors that will cause signal
degradation (metal is generally the worst culprit) are obstructions such
as walls and metal appliances. As a result, the typical indoor range of
your wireless devices will be between 100 to 200 feet. Note also that
connection speed may decrease as you move further from the Wireless
Router or Access Point.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, to five to ten
feet from the Wireless Router or Access Point. Please see the section
titled “Placement of your Wireless Networking Hardware for Optimal
Performance” on page 2 of this manual.
If issues persist even at close range, please contact please contact
Belkin Technical Support.
Signal strength is poor
Wireless Technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance
between devices increases. Other factors that will cause signal
degradation (metal is generally the worst culprit) are obstructions such
as walls and metal appliances. As a result, the typical indoor range of
your wireless devices will be between 100 to 200 feet. Note also that
connection speed may decrease as you move further from the Wireless
Router or Access Point. Please see the section titled “Placement of
your Wireless Networking Hardware for Optimal Performance” on page
2 of this manual.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, to five to ten
feet from Wireless Router or Access Point. Please see the section of
this manual titled “Placement of your Wireless Networking Hardware
for Optimal Performance”.
If issues persist even at close range, please contact please contact
Belkin Technical Support.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What’s the difference between 802.11b, 802.11g and 802.11a?
Currently there are three levels of wireless networking standards,
which transmit data at very different maximum speeds. Each is based
on the designation 802.11(x), so named by the IEEE, the board that
is responsible for certifying networking standards. The most common
wireless networking standard, 802.11b, transmits information at
11Mbps; 802.11a and 802.11g work at 54Mbps. See the following chart
for more detailed information.
Wireless Comparison
Wireless
Technology
802.11b
11Mbps
Common
802.11g
54Mbps
Common
802.11a
54Mbps
Speed
household devices household devices
such as cordless
phones and
microwave ovens
may interfere
such as cordless
phones and
microwave ovens
may interfere
5GHz -
uncrowded band
Frequency
with the 2.4GHz
unlicensed band
with the 2.4GHz
unlicensed band
Incompatible
with 802.11b or
802.11g
Compatible with
802.11g
Compatible with
802.11b
Compatibility
Range
Depends on
interference -
Depends on
interference -
Less interference
- range is
typically 100–200 typically 100–200 typically 50-100
ft. indoors
ft. indoors
feet
Slow adoption
Expected to
continue to grow in more popular in
popularity
for consumers -
Mature - widely
adopted
Adoption
Price
business
environments
Inexpensive
More expensive
Most expensive
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
1
2
3
4
5
6
7
8
Technical Support
belkin.com/networking. If you want to contact technical support by
phone, please call:
US: 877-736-5771
Europe: 00 800 223 55 460
Australia: 1800 666 040
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA
90220, declare under our sole responsibility that the product,
F5D7330
to which this declaration relates,
complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in
such manner that the potential for human contact normal operation is
minimized.
When connecting an external antenna to the device, the antenna
shall be placed in such a manner to minimize the potential for human
contact during normal operation. In order to avoid the possibility of
exceeding the FCC radio frequency exposure limits, human proximity
to the antenna shall not be less than 20cm (8 inches) during normal
operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions,
it may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more
of the following measures:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
1
2
3
4
5
6
7
8
•
•
•
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Modifications
The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by Belkin
Corporation may void the users authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210
Industry Canada. This Class B digital complies with Canadian ICES-
003.
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking comply with
the R&TTE Directive (1995/5/EC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the following
European Norms (in brackets are the equivalent international
standards).
•
•
•
EN 60950 (IEC60950) – Product Safety
EN 300 328 Technical requirement for radio equipment
ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on
your Belkin product.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Products with the CE marking comply with the EMC Directive
(89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued
by the Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms (in brackets are the equivalent international
standards).
•
•
EN 55022 (CISPR 22) – Electromagnetic Interference
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic
Immunity
•
•
•
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
EN 61000-3-3 (IEC610000) – Power Line Flicker
EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled
with CE 0682 or CE alert marking and may also carry
the CE logo.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
1
2
3
4
5
6
7
8
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials
and workmanship for its lifetime. If a defect is discovered, Belkin will,
at its option, repair or replace the product at no charge provided it
is returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased
the product. Proof of purchase may be required.
This warranty does not apply if the product has been damaged by
accident, abuse, misuse, or misapplication; if the product has been
modified without the written permission of Belkin; or if any Belkin
serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE
EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN,
EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any
modification, extension, or addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF
WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING
BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL,
DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY
PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN
PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the
above limitations of exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights
that vary from state to state.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless G
Ethernet Adapter
belkin.com
Belkin Ltd.
Belkin GmbH
Express Business Park • Shipton Way
Rushden • NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Hanebergstraße 2
80637 München • Germany
Tel: +49 (0) 89 143405 0
Fax: +49 (0) 89 143405 100
Fax: +44 (0) 1933 31 2000
Belkin B.V.
Belkin SAS
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
5 Rue du Petit Robinson • 3ème étage
78350 Jouy en Josas • France
Tel: +33 (0) 1 34 58 14 00
Fax: +33 (0) 1 39 46 62 89
Fax: +31 (0) 20 654 7349
Belkin Tech Support
Europa: 00 800 223 55 460
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. BROADCOM, 54g, and the 54g logo are trademarks of
Broadcom Corporation in the United States and/or other countries.
P74493uk
Download from Www.Somanuals.com. All Manuals Search And Download.
|
