Memorex TV VCR Combo MVT2135B User Manual
OWNER’S MANUAL  
MANUEL D'INSTRUCTIONS  
COMBINATION COLOR TELEVISION AND VIDEO  
CASSETTE RECORDER  
COMBINÉ TÉLÉVISEUR COULEUR ET  
MAGNÉTOSCOPE  
MVT2135B  
MVT2195B  
ATTENTION  
If you purchase a universal remote control from your local retailer, please  
contact the remote manufacturer for the required programming code.  
Si vous utilisez avec cet appareil une télécommande universelle (autre que  
celle vendue avec ce téléviseur), consultez la documentation accompagnant  
la télécommande universelle afin de connaître le code numérique  
correspondant au téléviseur.  
TV/CATV MODE SELECTION  
SELECTION DU MODE TV/CATV  
When shipped from the factory, the TV/CATV menu option is set to the  
“CATV”(Cable Television) mode.  
If not using CATV, set this menu option to the “TV” position.  
Lorsque l'appareil sort de l'usine, l'option du menu TV/CATV est réglée au  
mode "CATV" (câblodistribution).  
Si vous n'utilisez pas la câblodistribution, choisissez l'option "TV".  
Before operating the unit, please read this manual thoroughly.  
Avant de mettre cet appareil en marche, veuillez lire attentivement ce manuel.  
545A201A-E/COV-IN  
1
19*04*0, 17*20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
6. ATTACHMENTS  
Do not use attachments not recommended by the unit’s manufacturer as they may cause hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
Use only with a cart, stand, tripod, bracket, or table recommended by the  
manufacturer.  
8A. An appliance and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may cause the  
appliance and cart combination to overturn.  
S3126A  
9. VENTILATION  
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, and to ensure reliable  
operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The  
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit  
should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installa-  
tions such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have  
been adhered to.  
10. POWER SOURCES  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure  
of the type of power supply to your home, consult your appliance dealer or local power company. For units  
intended to operate from battery power, or other sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).  
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug  
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire  
grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power  
outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to  
replace your obsolete outlet.  
Do not defeat the safety purpose of the grounding-type plug.  
1
545A201A-E/P01-09  
1
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
(CONTINUED)  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon  
or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they  
exit from the appliance.  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit  
due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be  
fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out  
parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded  
so as to provide some protection against voltage surges and built-up static charges, Section 810 of the National  
Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and support-  
ing structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location  
of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service personnel.  
19. DAMAGE REQUIRING SERVICE  
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls  
that are covered by the operating instructions, as an improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician to restore the unit to its normal  
operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
20. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by the  
manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
2
545A201A-E/P01-09  
2
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
22. WALL OR CEILING MOUNTING  
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.  
23. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
24. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the  
grounding system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
EQUIPMENT  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
3
545A201A-E/P01-09  
3
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Color TV With Video Cassette Recorder - Unique space saving design combines a color TV and a video cassette  
recorder.  
High Quality Picture Technology - This TV/VCR equipped “HQ” incorporates VHS High Quality technology.  
A built-in detail enhancer is used to boost the recorded signal and provide maximum picture quality during playback.  
It is compatible with other VHS video cassette recorders.  
Frequency Synthesized Tuner - Electronically locks in and memorizes all available channels for perfect reception  
with the touch of a button.  
181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels. The  
actual number of channels received depends upon channel reception in your area or your cable system.  
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing  
impaired viewers.  
8-Programs/1-Month Programmable Timer With Everyday/Every Week Capability - The built-in timer allows  
automatic absentee recording of up to 8 TV programs within 1 month. It is also possible to record a program which is  
broadcast at the same time everyday or every week.  
Auto Clock Set - Once your TV/VCR is plugged into the AC outlet, it automatically sets the correct date and time.  
On-Screen TV Display And VCR Programming - When you select a channel or make other changes, the TV will show  
an indicator on the screen for a few seconds. Timer recording can be programmed and confirmed on the screen.  
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment  
of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
Automatic Playback/Rewind-Stop-Eject - When loading a cassette tape without the erase prevention tab, this TV/  
VCR will automatically play back the cassette tape at the correct speed. When a tape reaches its end during play-  
back, recording (except during OTR and Timer Record) and fast forward, it will automatically stop, rewind, stop and  
eject the tape.  
Programmable ON/OFF Timer - Allows you to automatically turn on or off the TV/VCR at a set time.  
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed up to 120 minutes  
to turn off automatically.  
Skip Search - When the SKIP SEARCH button is pressed during playback, the TV/VCR will automatically search  
forward in 30 second increments to a maximum of 3 minutes with each press of the SKIP SEARCH button, and then  
return to normal playback.  
Automatic Repeat Play System - When Auto Repeat option is turned on, the TV/VCR will automatically play back  
the same cassette tape repeatedly.  
One-Touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the TV/VCR can be programmed for  
up to 5 hours of recording with an immediate start.  
2 Speed Picture Search - 3 or 5 times normal speed in SP mode (7X or 9X in LP and 9X or 15X in SLP).  
3 Speed Record Playback - Records and plays three tape speeds (SP, LP, SLP).  
Real Time Tape Counter With Zero Return - The counter displays the real tape time and the zero return can be  
used to return the tape to a preselected position (00:00:00) while the counter can be used to locate programs.  
Digital Auto Tracking - Automatically adjusts tracking during playback for the best possible picture.  
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-screen  
programming.  
TV Monitor - When the TV MONI. button on the remote control is pressed during playback, the TV channel selected  
on the VCR can be viewed.  
V-Chip - The V-Chip function can rate a TV program or movie content. It allows you to set a restriction level.  
Front Audio/Video In Jacks - A VCR or other video device may be hooked up for dubbing.  
4
545A201A-E/P01-09  
4
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
It is recommended that you carefully read the descriptions and operating procedures contained in this Owner’s  
Manual prior to operating your new TV/VCR.  
PREPARATION  
PRECAUTIONS ...................................................................................................................................................... 6  
LOCATION OF CONTROLS ................................................................................................................................... 8  
REMOTE CONTROL .............................................................................................................................................. 9  
ANTENNA CONNECTIONS ................................................................................................................................. 11  
CABLE TV CONNECTIONS ................................................................................................................................. 13  
SETTING THE LANGUAGE .................................................................................................................................. 14  
AUTO CLOCK SETTING ...................................................................................................................................... 15  
MANUAL CLOCK SETTING ................................................................................................................................. 17  
TV OPERATION  
TV OPERATION .................................................................................................................................................... 18  
TO MEMORIZE CHANNELS ................................................................................................................................ 22  
SETTING THE V-CHIP .......................................................................................................................................... 25  
TO SET THE ON TIMER ....................................................................................................................................... 29  
TO SET THE OFF TIMER ..................................................................................................................................... 30  
PICTURE CONTROL ADJUSTMENTS ................................................................................................................ 31  
PLAYBACK  
LOADING AND UNLOADING A VIDEO CASSETTE............................................................................................ 33  
PLAYBACK............................................................................................................................................................ 35  
SPECIAL PLAYBACK ........................................................................................................................................... 37  
RECORDING  
RECORDING A TV PROGRAM ............................................................................................................................ 39  
ONE-TOUCH TIMER RECORDING (OTR)........................................................................................................... 41  
TIMER RECORDING ............................................................................................................................................ 42  
OTHER FUNCTIONS FOR THE TIMER RECORDING ........................................................................................ 44  
ADDITIONAL INFORMATION  
USING THE REAL TIME TAPE COUNTER .......................................................................................................... 46  
USING ZERO RETURN ........................................................................................................................................ 47  
DUPLICATING A VIDEO TAPE ............................................................................................................................. 48  
RECEPTION DISTURBANCES ............................................................................................................................ 49  
TROUBLESHOOTING GUIDE.............................................................................................................................. 50  
VIDEO HEAD CLEANING..................................................................................................................................... 52  
SPECIFICATIONS................................................................................................................................................. 53  
5
545A201A-E/P01-09  
5
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
MOISTURE CONDENSATION  
DO NOT OPERATE ANY FUNCTIONS ON THIS UNIT FOR AT LEAST TWO OR  
THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON IT. LET THE  
UNIT STAND WITH POWER ON (SEE BELOW).  
WHAT IS MOISTURE CONDENSATION?  
When a cold liquid is poured into a glass, for example, water vapor in the air will  
condense on the surface of the glass. This is called moisture condensation.  
Head Drum  
MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;  
• When you move the unit from a cold to a warm place.  
• After heating a cold room or under extremely humid conditions.  
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,  
Plug the power cord into an AC outlet, press the POWER button to turn on and  
leave the unit at room temperature until moisture condensation disappears.  
Depending on the surrounding conditions, this may take two or three hours.  
Video Tape  
Avoid extreme heat.  
If you cause a static discharge when touching the  
unit, and the unit fails to function, simply unplug the  
unit from the wall outlet, wait a few minutes, and  
plug it back in. The unit should return to normal  
operation.  
104˚F  
(40˚C)  
Do not place the unit on or near appliances which  
may cause electromagnetic interference (e.g. speak-  
ers, etc). Doing so may cause erratic operation of the  
unit including picture and/or sound distortion or noise.  
Avoid extreme cold.  
(5˚C)  
41˚F  
Avoid extreme moisture and dust.  
The ventilation holes prevent overheating. Do not  
block or cover these holes. Especially avoid  
covering the holes with soft materials such as cloth  
or paper.  
6
545A201A-E/P01-09  
6
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not insert fingers or any other objects into the  
cassette loading slot. Do not spray cleaner or wax  
directly on the unit or use forced air to remove dust.  
Avoid places subject to strong vibration. Use in a  
horizontal (flat) position only.  
Keep the unit away from flower vases, sinks, etc. If  
liquids should be spilled into the unit, serious  
damage will result. If you spill any liquids into the  
unit, unplug the AC power cord immediately and  
consult qualified service personnel before attempting  
to use it again.  
When you finish operating the unit, always unload  
the cassette and turn off the power.  
When you leave your home for a long time, unplug  
the AC power cord.  
To protect the unit from a lightning storm, unplug the  
AC power cord from the wall outlet and disconnect  
the antenna
POWER SOURCE  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert  
the AC cord plug into a standard 120V 60Hz polarized AC outlet.  
AC Outlet  
Wider Hole  
and Blade  
NOTES:  
1. Never connect the AC line cord plug to other than the specified  
voltage (120V 60Hz). Use the attached power cord only.  
2. If the polarized AC cord plug does not fit into a non-polarized AC  
outlet, do not attempt to file or cut the blade. It is the user’s  
responsibility to have an electrician replace the obsolete outlet.  
3. If you cause a static discharge when touching the unit, and the  
unit fails to function, simply unplug the unit, from the AC outlet,  
wait a few minutes, and plug it back in. The unit should return to  
normal operation.  
Polarized AC Cord plug.  
(One blade is wider than the other.)  
7
545A201A-E/P01-09  
7
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
FRONT  
REAR  
1
2
3
4
5
6
7
8
16  
17  
Power Rec/OtrT-Rec  
Video  
Volume  
Channel  
Stop/  
Eject  
Rew  
Play  
F.Fwd Rec/Otr  
Phones Power  
–
In – Audio  
9
10  
11  
12  
13 14 15  
DESCRIPTION OF CONTROLS  
FRONT:  
11. Rew (Rewind) Button - In the Stop mode, this  
button rapidly winds the tape backwards. In the Play  
mode, this button activates reverse search.  
12. F.Fwd (Fast Forward) Button - In the Stop mode,  
this button rapidly winds the tape forward. In the  
Play mode, this button activates forward search.  
13. Remote Sensor - Signals from the Remote Control  
are received here.  
1. Cassette Loading Slot - To insert or remove a  
video tape.  
2. Phones Jack - Plug monaural headphones or an  
earphone with an 1/8" miniplug into this jack for  
private listening.  
3. Volume ▲ / ▼ Buttons - Press to raise or lower the  
volume of the sound.  
4. Stop/Eject Button - Press once to stop the tape in  
any mode. Press again to eject the tape.  
5. Play Button - Press to play a prerecorded tape.  
6. Rec/Otr Button - Press once to start normal  
recording. Additional presses activate One-touch  
Timer Recording.  
14. Rec/Otr Indicator - Lights when the TV/VCR is  
recording.  
15. Audio/Video In Jacks - Audio and video signal  
cables from an external source can be connected  
here.  
7. Power Indicator - Lights when the power is turned on.  
8. T-Rec Indicator - This lights up when the TIMER  
REC button is pressed.  
REAR:  
16. VHF/UHF Antenna Jack - Connect the 75 ohm  
coaxial cable from the antenna or Cable TV service  
to this jack.  
9. Power Button - Press to turn the TV/VCR on or off.  
10. Channel ▲ / ▼ Buttons - Press to select a channel  
for viewing or recording.  
17. AC Power Cord - Connect to a 120V, 60Hz outlet.  
8
545A201A-E/P01-09  
8
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
10  
11  
1
17  
22  
POWER  
SLEEP  
TV MONI.  
EJECT  
POWER  
SLEEP  
TV MONI.  
EJECT  
2
3
CHANNEL  
CHANNEL  
1
4
2
5
8
0
3
1
4
2
5
8
0
3
+
+
6
6
–
–
12  
13  
VOLUME  
VOLUME  
7
9
7
9
23  
24  
18  
19  
+
–
+
–
CALL  
QUICK VIEW  
CALL  
QUICK VIEW  
INPUT SELECT  
REC/OTR  
REW  
MUTING  
INPUT SELECT  
REC/OTR  
REW  
MUTING  
4
5
PAUSE/STILL  
F.FWD  
PAUSE/STILL  
F.FWD  
PLAY  
PLAY  
14  
15  
25  
26  
27  
SPEED  
MENU  
ENTER  
SPEED  
MENU  
ENTER  
20  
21  
STOP  
STOP  
6
7
–
SET/TRACKING  
+
CANCEL  
–
SET/TRACKING  
+
CANCEL  
AUTO  
TV/CAP/  
TEXT  
AUTO  
TV/CAP/  
TIMER REC  
TEXT  
TIMER REC  
PROGRAM TRACKING  
PROGRAM TRACKING  
28  
29  
SKIP  
SEARCH RESET  
COUNTER ZERO  
RETURN  
SKIP COUNTER ZERO  
SEARCH RESET RETURN  
8
9
16  
DESCRIPTION OF CONTROLS  
1. POWER Button - Press to turn the TV/VCR on.  
Press again to turn the TV/VCR off.  
2. Direct Channel Selection Buttons (0-9) - Allows  
direct access to any channel.  
3. CALL Button - Displays the present time/day of the  
week, channel, counter, speed selection (and VCR  
mode if VCR is playing) on the TV screen.  
4. REC/OTR Button - Press once to start normal  
recording. Additional presses activate One-touch Timer  
Recording.  
5. REW (Rewind) Button - In the Stop mode, this button  
rapidly winds the tape backwards. In the Play mode,  
this button activates reverse search.  
14. F.FWD (Fast Forward) Button - In the Stop mode,  
this button rapidly winds the tape forward. In the Play  
mode, this button activates forward search.  
15. AUTO TRACKING Button - Allows automatic adjustment  
of tracking to minimize picture noise during playback.  
16. TV/CAP/TEXT Button - Switches between Caption,  
Text and TV modes for Closed-Captioned programs.  
17. SLEEP Button - Sets the TV to turn off automatically  
after up to 120 minutes.  
18. INPUT SELECT Button - Switches the program for  
viewing between the VCR and external input sources.  
19. PLAY Button - Press to play a prerecorded tape.  
20. SET/TRACKING + / – Buttons - Used to set or adjust  
in the menu mode. During playback, they are used to  
adjust tracking manually.  
6. SPEED Button - Sets the tape speed for recording.  
7. MENU Button - Press to display the On-Screen menu  
function.  
8. PROGRAM Button - Press to confirm the programmed  
timer recording and ON/OFF timer.  
21. COUNTER RESET Button - Used to reset the counter  
to 00:00:00.  
22. EJECT Button - Press to eject the tape.  
9. SKIP SEARCH Button - Press in the playback mode  
to search forward in 30 seconds increments to a  
maximum of 3 minutes.  
10. TV MONI. Button - Used to temporarily view a TV  
channel selected on the VCR while in the playback  
mode.  
23. VOLUME + / – Buttons - Press the + button to  
increase, or the – button to decrease the volume level.  
24. PAUSE/STILL Button - During recording, this button  
temporarily stops the tape. During playback, it stops  
the tape and displays a still image on the TV screen.  
25. STOP Button - Press once to stop the tape.  
11. CHANNEL + / – Buttons - Press the + button to change 26. ENTER Button - Press to enter or select information  
to a higher numbered channel set into memory.  
Press the – button to change to a lower numbered  
channel set into memory.  
for On-Screen operations.  
27. CANCEL Button - Used to clear the selected timer  
recording program.  
12. QUICK VIEW Button - Switches between the present  
channel and the last channel selected.  
28. TIMER REC Button - Used to set the TV/VCR to start  
recording at a preset time.  
13. MUTING Button - Press to turn off the sound. Press  
again to turn the sound back on.  
29. ZERO RETURN Button - Use to stop the tape when  
the counter reaches 00:00:00.  
9
545A201A-E/P01-09  
9
19*04*0, 17*19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
(CONTINUED)  
BATTERY INSTALLATION  
Slide the battery compart-  
ment cover in the direction  
of the arrow.  
Install two “AAA” batteries,  
paying attention to the  
polarity diagram in the  
battery compartment.  
Replace the compartment  
cover.  
1
2
3
BATTERY PRECAUTIONS  
The precautions below should be followed when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.  
Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury  
from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER  
30˚ 30˚  
15 FEET  
NOTES: When there is an obstacle between the TV/VCR and the remote control, the remote control may not  
•
operate.  
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the  
Remote sensor of the TV/VCR, the remote operation may be unstable.  
•
10  
545A201A-E/P10-19  
10  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANTENNA CONNECTIONS  
If you are using an indoor or outdoor antenna (outdoor antenna not included), follow the instructions below  
that correspond to your antenna system. If you are using a cable TV service (CATV), see page 13 for Cable  
TV connections.  
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm Twin-lead Wire)  
Connect the 75 ohm cable from the combination VHF/  
UHF antenna to the Antenna Jack.  
If your combination VHF/UHF antenna has a 300 ohm  
Twin-lead Wire, the use of the 300-75 ohm Matching  
Transformer (not supplied) may be necessary.  
Antenna  
Jack  
Antenna  
Jack  
75 ohm  
Coaxial  
Cable  
300-75 ohm  
Matching  
Transformer  
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)  
Connect the UHF 300 ohm Twin-lead Wire to the  
Combiner (not supplied). Connect the VHF 300 ohm  
Twin-lead Wire to the 300-75 ohm Matching Transformer  
(not supplied). Attach the Transformer to the combiner,  
then attach the Combiner to the Antenna Jack.  
300-75 ohm  
Matching  
Transformer  
Antenna  
Jack  
Combiner  
UHF 300 ohm  
VHF 300 ohm  
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF Twin-lead Wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
Twin-lead Wire to the combiner. Attach the Combiner  
to the Antenna Jack.  
Antenna  
Jack  
VHF 75 ohm  
Combiner  
UHF 300 ohm  
11  
545A201A-E/P10-19  
11  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANTENNA CONNECTIONS  
(CONTINUED)  
INDOOR ANTENNA  
Insert a twin-lead telescopic antenna (MVT2135B only) into the mounting hole on the back of the cabinet until it  
locks into place. Attach the antenna plug to the antenna jack. Adjust the length and angle of the antenna rods to  
receive the best possible picture.  
12  
545A201A-E/P10-19  
12  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLE TV CONNECTIONS  
This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV  
converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is gener-  
ally provided by the cable company.  
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE  
For basic cable service not requiring a Converter/Descrambler box,  
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack  
on the back of the TV/VCR.  
Antenna  
Jack  
VHF  
UHF  
75 ohm  
Coaxial Cable  
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE  
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming  
75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack  
of the Converter/Descrambler box to the Antenna Jack on the TV/VCR. Follow the connections shown below. Set the  
TV/VCR to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/  
Descrambler box to select channels.  
Incoming  
75 ohm  
CATV cable  
Antenna  
Jack  
75 ohm Cable to  
TV/VCR  
Converter/  
Descrambler  
VHF  
UHF  
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH  
SCRAMBLED PREMIUM CHANNELS  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a Converter/Descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the  
Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”  
position, you can directly tune any nonscrambled channels on your TV/VCR. With the switch in the “A” position, tune  
your TV/VCR to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/  
Descrambler box to tune scrambled channels.  
Converter/  
Descrambler  
Incoming  
75 ohm  
Antenna  
Jack  
75 ohm cable  
to TV/VCR  
CATV cable  
A
A/B Switch  
Splitter  
B
VHF  
UHF  
13  
545A201A-E/P10-19  
13  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE LANGUAGE  
This TV/VCR can display the on screen language in English, Spanish or French.  
Language selection (step 3) will automatically appear on the screen when you press the MENU button  
initially. Select language to use the other menu options.  
Press the MENU button.  
Press the SET/TRACKING + or – button to  
select the LANGUAGE option, then press the  
ENTER button.  
Press the SET/TRACKING + or – button to  
select the SYSTEM SET-UP option, then press  
the ENTER button.  
2
1
MENU  
–
SET/TRACKING  
+
ENTER  
–
SET/TRACKING  
+
ENTER  
SYSTEM SET-UP  
M E N U  
CLOCK SET  
TIMER REC SET  
LANGUAGE/IDIOMA/LANGUE  
AUTO CLOCK ON OFF  
STANDARD TIME  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
DAYLIGHT SAVING TIME  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/ST
MENU  
F
.FWD  
PR  
OGRAM  
–
1 4  
ST  
OP  
SET/TRA  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
1 2 3  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING + or – button to  
select the desired language: English (ENG-  
LISH), Spanish (ESPAÑOL) or French  
Press the MENU button twice to return to  
normal TV viewing.  
3
4
(FRANCAIS), then press the ENTER button.  
MENU  
–
SET/TRACKING  
+
ENTER  
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
⟨
+/–/ENTER/MENU  
⟩
14  
545A201A-E/P10-19  
14  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO CLOCK SETTING  
TheAuto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is  
connected to an Antenna or Cable system and it is turned off. As the TV/VCR searches for a receivable station  
in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes.  
AUTO CLOCK SETTING  
1. Connect the Antenna or Cable system.  
• If you use a cable box, turn it on.  
2. Plug the AC Power cord to the AC outlet.  
3. Make sure the TV/VCR is turned off.  
• If you press the POWER button, the Auto Clock set is not effective.  
4. Press the CALL button to check the clock on the screen.  
5. If the clock is not set, check the Antenna condition. The Auto Clock does not function depend on the reception  
condition.  
AUTO CLOCK ADJUSTMENT  
The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.  
• If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on.  
• The Auto Clock Adjustment is not effective when there is a difference of more than 5 minutes exist between the  
built-in clock time and the actual time.  
TO SET AUTO CLOCK TO OFF  
When shipped from factory the AUTO CLOCK option is set to ON.  
But if you do not want Auto Clock set (Adjustment):  
1. Turn on the TV/VCR  
2. Press the MENU button.  
3. Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.  
4. Press the SET/TRACKING + or – button to select the AUTO CLOCK option.  
5. Press the ENTER button to select OFF.  
6. Press the MENU button repeatedly to return to the normal screen.  
• When the AUTO CLOCK is set to OFF, the Auto Clock adjustment is not functional.  
• Set the clock manually (see page 17).  
TO SET STANDARD TIME  
In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may  
recognize the wrong station for the Auto Clock set.  
To correct the situation:  
1. Press the MENU button.  
2. Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.  
3. Press the SET/TRACKING + or – button to select the STANDARD TIME option, then Press the ENTER button.  
4. Press the SET/TRACKING + or – button to select your time zone, then press the ENTER button.  
ATLANTIC  
EASTERN  
CENTRAL  
MOUNTAIN  
PACIFIC  
ALASKA  
HAWAII  
:
:
:
:
:
:
:
:
GMT  
GMT  
GMT  
GMT  
GMT  
GMT  
GMT  
AUTO SET  
– 4 hours  
– 5 hours  
– 6 hours  
– 7 hours  
– 8 hours  
– 9 hours  
– 10 hours  
(GMT: Greenwich Mean Time)  
AUTO  
5. Press the MENU button twice to return to the normal screen.  
15  
545A201A-E/P10-19  
15  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO CLOCK SETTING  
(CONTINUED)  
DAYLIGHT SAVING TIME SETTING  
You can set the Daylight saving time automatically or manually.  
Press the MENU button. Press the SET/  
TRACKING + or – button to select the SYSTEM  
SET-UP option, then press the ENTER button.  
Press the SET/TRACKING + or – button to se-  
lect the DAYLIGHT SAVING TIME option, then  
press the ENTER button.  
1
2
MENU  
–
SET/TRACKING  
+
ENTER  
–
SET/TRACKING  
+
ENTER  
M E N U  
SYSTEM SET-UP  
TIMER REC SET  
CLOCK SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
LANGUAGE/IDIOMA/LANGUE  
AUTO CLOCK ON OFF  
STANDARD TIME  
DAYLIGHT SAVING TIME  
⟨
+/–/ENTER/MENU  
⟩
+/–/ENTER/MENU  
⟨ ⟩  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
1 3  
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
1 2  
3
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING + or – button to select one of the options, then press the ENTER button.  
Press the MENU button until the MENU screen is cleared.  
3
–
SET/TRACKING  
+
MENU  
ENTER  
for manual setting  
(forward one hour)  
for manual setting  
(back one hour)  
for automatic setting  
(read XDS in the signal)  
ON:  
OFF:  
AUTO:  
DAYLIGHT SAVING TIME  
ON  
OFF  
When you want to set the Daylight Saving Time manually,  
on the first Sunday in April you set to “ON”, and on the last  
Sunday in October you set to “OFF”.  
AUTO  
⟨
+/–/ENTER/MENU  
⟩
NOTES: • When shipped from factory, the DAYLIGHT SAVING TIME option is set to AUTO position.  
• When the clock is not set, Daylight Saving Time setting is not available.  
• When there is no Daylight Saving Time in your area, always select OFF position in step 3.  
16  
545A201A-E/P10-19  
16  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL CLOCK SETTING  
You must set the date and time manually for timer recordings, ON/OFF Timer and Daylight Saving Time if  
the Auto Clock process did not set them correctly.  
EXAMPLE: Setting the clock to “8:30 AM”, 23rd. (MON) October, 2000.  
Press the MENU button.  
Press the SET + or – button to select the SYSTEM  
SET-UP option, then press the ENTER button.  
Press the SET/TRACKING + or – button to  
select the CLOCK SET option, then press the  
ENTER button.  
1
2
MENU  
–
SET/TRACKING  
+
ENTER  
–
SET/TRACKING  
+
ENTER  
SYSTEM SET-UP  
M E N U  
CLOCK SET  
TIMER REC SET  
LANGUAGE/IDIOMA/LANGUE  
AUTO CLOCK ON OFF  
STANDARD TIME  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
DAYLIGHT SAVING TIME  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
1
P
A
SPEED  
USE/ST
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
1 2 3 4  
ZER  
RETURN  
O
After setting the clock, date and  
time starts functioning automatically.  
Press the SET/TRACKING  
+ or – button to set the month,  
then press the ENTER button.  
Set the day, year and time  
as in step 3.  
3
4
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
CLOCK SET  
CLOCK SET  
8:30 AM MON  
MONTH  
DAY  
10  
MONTH  
DAY  
10  
23 (MON)  
1 (SUN)  
YEAR  
TIME  
2000  
:
YEAR  
TIME  
2000  
:
8
30 AM  
12 00 AM  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
+/–/ENTER/CANCEL/MENU  
⟨ ⟩  
NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the  
present time again if the Auto Clock did not set correctly.  
• To move cursor backward, press the CANCEL button.  
17  
545A201A-E/P10-19  
17  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV OPERATION  
Adjust the volume level by  
pressing the VOLUME + or –  
button. The volume level will  
Set the TV/CATV menu  
option to the appropriate  
position. (See page 22.)  
To turn on the TV/VCR,  
press the POWER button.  
3
1
2
be indicated on the screen by green  
bars. As the volume level increases,  
so do the number of bars. If the  
volume decreases, the number of  
green bars also decreases.  
POWER  
TV  
- VHF/UHF Channels  
CATV - CABLE TV Channels  
VOLUME  
VOLUME  
32  
VHF/UHF/CATV CHANNELS  
PO  
WER  
CATV  
TV  
1
SLEEP  
1
VHF  
2-13  
VHF  
2-13  
4
5
2
TV MONI.  
7
8
3
EJECT  
UHF  
14-69  
STD/HRC/IRC  
14-36  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
REC/O  
TR  
4
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
MENU  
2
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
(5A)  
Press the Direct Channel selection buttons to select the channel.  
TV mode direct channel selection  
When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two  
buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for  
two seconds.) For channels 10 and above, press the 2 digits in order.  
4
0
2
1
CATV mode direct channel selection  
When the TV/CATV menu option is in the CATV position, channels can be selected as follows:  
TO SELECT CATV CHANNELS:  
1-9  
Press “0” twice, then 1-9 as needed. Example, to select channel 2, press "002".  
10-12  
13-99  
Press “0”, then the remaining 2 digits. Example, to select channel 12, press "012".  
Press the 2 digits in order. Example, to select channel 36, press "36".  
CH 012  
100-125 Press the 3 digits in order. Example, to select channel 120, press "120".  
NOTE FOR CHANNELS 1-12:  
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.  
NOTES: • If a channel with no broadcast is selected, the sound will automatically be muted.  
• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.  
18  
545A201A-E/P10-19  
18  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MUTING  
CHANNEL + / –  
Press and release the CHANNEL + or – button. The  
channel automatically stops at the next channel set  
into memory.  
For proper operation, before selecting channels, they  
should be set into the memory.  
Press this button to switch off the sound. The TV/VCR’s  
sound will be silenced and “MUTING” will briefly appear  
on the screen. The sound can be switched back on by  
pressing this button again or one of the VOLUME + or  
– buttons.  
MUTING  
CHANNEL  
MUTING  
CH 012  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TV/CAP/  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
CANCEL  
TEXT  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
CALL  
Press the CALL button. The clock, date, channel number, real time tape counter, tape speed and VCR  
operation will be indicated.  
Press CALL button again to disappear the call display.  
VCR operation  
Current time  
: Play  
VCR operation  
Channel No.  
Auto Repeat  
Tape In  
: Rewind  
: Fast-forward  
: Eject  
CALL  
:
8 47AM THU  
CH 012  
: Recording  
: Pause  
:
:
00 04 38 SP  
Tape Speed  
: Stop  
Real Time Counter  
NOTE: To listen through the headphone, insert a headphone (not supplied) with a 1/8" mini plug into PHONES jack  
on the front. The sound from the TV speaker is muted.  
19  
545A201A-E/P10-19  
19  
19*04*0, 17*13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV OPERATION  
(CONTINUED)  
SLEEP  
To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control.  
The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep  
time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is  
operating. To confirm the sleep timer setting, press the SLEEP button and the remaining time will be momen-  
tarily displayed. To cancel the sleep timer, press the SLEEP button repeatedly until the display turns to 0.  
SLEEP  
SLEEP  
120  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TV/CAPTION/TEXT  
QUICK VIEW  
This button allows you to go back to the last channel  
selected by pressing the QUICK VIEW button. Press  
this button again to return to the last channel you  
were watching.  
Press this button to switch between normal TV and  
the two closed caption modes (captions and full  
screen text). Closed captioning will display text on the  
screen for hearing impaired viewers.  
TV/CAP/  
TEXT  
QUICK VIEW  
CH 012  
CAPTION CH 1  
NOTES: • If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder text may not appear.  
In this case, adjust the antenna for better reception or use an outdoor antenna.  
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text  
appears on the screen.  
• Closed Captioned TV programs can be recorded and played back on a VCR with the Closed Captioned  
text intact. The Closed Captioning text will disappear during Cue, Rewind and Pause modes or if the VCR  
tracking is not adjusted properly.  
• Closed Captioned text is only displayed in locations where it is available.  
20  
545A201A-E/P20-29  
20  
19*04*0, 17*11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Text: The Text Closed Caption Mode will usually fill the  
screen with a programming schedule or other information.  
After selecting a Closed Caption Mode, it will stay in  
effect until it is changed, even if the channel is changed.  
If the Captions signal is lost due to a commercial or a  
break in the signal, the Captions will reappear when the  
signal is received again.  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display  
Closed Captioned television programs. Closed  
Captioning will display text on the screen for hearing  
impaired viewers or it will translate and display text in  
another language.  
If the channels are changed, the Captions will be delayed  
approximately 10 seconds.  
CLOSED CAPTIONING WITH A VCR  
Closed Captioned programs can be recorded and played  
back on a VCR with the Closed Captioned text intact.  
The Closed Captioned text will disappear during Cue  
(Fast Forward Search), Review (Rewind Search) and  
Pause Modes or if the VCR tracking is not adjusted  
properly.  
The Captions will appear in places on the screen where  
they will least interfere with the picture, usually on the  
bottom of the screen. News programs will usually show  
three-line Closed Captions which scroll onto the screen.  
Most other shows provide two or three lined Captions  
placed near the character who is speaking so the viewer  
can follow the dialogue.  
TO VIEW CLOSED CAPTIONS  
Words in italics or underlined describe titles, words in  
foreign languages or words requiring emphasis. Words  
that are sung usually appear enclosed by musical notes.  
For television programs broadcasting with Closed Cap-  
tions, look in your TV guide for the Closed Captions  
symbol (CC).  
Press the TV/CAP/TEXT button on the remote control to  
switch between normal TV and the two Closed Caption  
Modes (Captions and Full Screen Text).  
Captions: This Closed Caption Mode will display text  
on the screen in English or another language (depend-  
ing on the setting of the Closed Captions CH. 1 or 2).  
Generally, Closed Captions in English are transmitted  
on Captions Channel 1 and Closed Captions in other  
languages are transmitted on Captions Channel 2.  
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with  
Closed Captioning, especially with live programs. This is because during live programs, captions are also  
entered live. These transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may  
interfere with Closed Captions.  
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or  
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception  
or use an outdoor antenna.  
21  
545A201A-E/P20-29  
21  
19*04*0, 17*11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO MEMORIZE CHANNELS  
This TV/VCR is equipped with a channel memory feature which allows channels to skip up or down to the  
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be  
programmed into the TV/VCR’s memory. In addition to normal VHF and UHF channels, this TV/VCR can  
receive up to 113 Cable TV channels. To use this TV/VCR with an antenna, set the TV/CATV menu option to  
the TV mode. When shipped from the factory, this menu option is in the CATV mode.  
TV/CATV SELECTION  
Press the SET/TRACKING + or – button to  
select the CH SET-UP mode, then press the  
ENTER button.  
Press the MENU button.  
1
2
MENU  
–
SET/TRACKING  
+
ENTER  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
CATV CHART  
The chart below is typical of many cable system channel allocations.  
Number on this TV:  
14 15 16 17 18  
19 20 21 22  
Corresponding CATV channel:  
A
B
C
D
E
F
G
H
I
23  
24 25 26 27 28  
29 30 31  
32 33 34 35 36  
37 38 39 40  
AA BB CC DD  
55 56 57 58  
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
41  
42 43 44 45 46  
47 48 49  
50 51 52 53 54  
EE FF GG HH  
59  
WW AAA BBB CCC DDD EEE FFF GGG HHH  
77 78 79 80 81 82 83 84 85  
RRR SSS TTT UUU VVV WWW XXX YYY ZZZ  
95 96 97 98 99 100 101 102 103  
II  
JJ KK LL MM  
NN OO PP QQ RR SS TT UU VV  
68 69 70 71 72 73 74 75 76  
III JJJ KKK LLL MMM NNN OOO PPP QQQ  
60 61 62 63 64  
65 66 67  
86 87 88 89 90  
86 87 88 89 90  
91 92 93 94  
91 92 93 94  
104 105 106 107 108 109 110 111 112  
104 105 106 107 108 109 110 111 112  
122 123 124 125 01  
A-5 A-4 A-3 A-2 A-1 100 101 102 103  
113 114 115 116 117 118 119 120 121  
113 114 115 116 117 118 119 120 121  
122 123 124 125 5A  
Press the SET/TRACKING  
+ or – button to select the  
TV/CATV mode.  
Press the ENTER button  
Press the MENU button until  
the MENU screen is cleared.  
to select the TV or CATV  
mode. The arrow indicates  
the selected mode.  
3
4
5
–
SET/TRACKING  
+
ENTER  
MENU  
CH SET-UP  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
TV  
- VHF/UHF channels  
⟨
+/–/ENTER/MENU  
⟩
CATV - CABLE TV channels  
22  
545A201A-E/P20-29  
22  
19*04*0, 17*11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTOMATIC MEMORY TUNING  
Press the MENU button.  
Press the SET/TRACKING + or – button to  
select the CH SET-UP mode, then press the  
ENTER button.  
1
2
MENU  
–
SET/TRACKING  
+
ENTER  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
1 4  
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
2 3  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING + or – button to select  
the AUTO CH MEMORY mode, then press the  
ENTER button. The TV will begin memorizing all  
the channels available in your area.  
Press the MENU button until the MENU  
screen is cleared.  
3
4
MENU  
–
SET/TRACKING  
+
ENTER  
CH SET-UP  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
⟨
+/–/ENTER/MENU  
⟩
23  
545A201A-E/P20-29  
23  
19*04*0, 17*11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO MEMORIZE CHANNELS  
(CONTINUED)  
TO ADD/DELETE CHANNELS  
Press the SET/TRACKING +  
Press the MENU button.  
Press the SET/TRACKING +  
or – button to select the  
ADD/DELETE mode, then  
press the ENTER button.  
or – button to select the CH  
SET-UP mode, then press the  
ENTER button.  
1
2
3
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
MENU  
M E N U  
CH SET-UP  
TIMER REC SET  
TV CATV  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
AUTO CH MEMORY  
ADD/DELETE  
⟨
+/–/ENTER/MENU  
⟩
+/–/ENTER/MENU  
⟨ ⟩  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
2 3  
1 6  
4
+
PLA  
MUTIN
Y
–
P
SPEED  
A
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
2 3  
5
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the ENTER button to  
select the ADD or DELETE. If  
you select an unmemorized  
Select the desired channel  
to be memorized or deleted  
using SET/TRACKING + or  
Press the MENU button until  
the MENU screen is cleared.  
4
5
6
channel, the Channel indication will be  
red. If you select the ADD mode, the  
Channel indication changes from red to  
green and the channel will be memorized.  
If you select a memorized channel, the  
Channel indication will be green. If you  
select the DELETE mode, the Channel  
indication changes from green to red  
and the channel will be deleted from the  
memory.  
– button, or using the Direct Chan-  
nel Selection buttons (10 keys,  
0-9), or CHANNEL + or – button.  
MENU  
–
SET/TRACKING  
+
ADD  
CH 003  
ENTER  
⟨
0–9/+/–/ENTER/MENU  
⟩
24  
545A201A-E/P20-29  
24  
19*04*0, 17*11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE V-CHIP  
An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The  
TV/VCR corresponds to "TV RATING" and "MOVIE RATING". To use the V-Chip function, you must register a  
password.  
TO REGISTER PASSWORD  
Press the SET/TRACKING + or – button to  
select the TV SET-UP option, then press the  
ENTER button.  
Press the MENU button.  
1
2
MENU  
–
SET/TRACKING  
+
ENTER  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
1
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
4 5  
MENU  
2 3  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING  
+ or – button to select the  
V-CHIP SET then press the  
ENTER button.  
Enter the same password  
again for the safety, then  
press the ENTER button.  
Enter the password (4 digits)  
using the Direct Channel  
Selection buttons (0-9), then  
press the ENTER button.  
3
4
5
–
SET/TRACKING  
+
ENTER  
1
2
3
4
1
2
3
4
V-CHIP SET  
NEW  
PASSWORD: ****  
V-CHIP SET  
CONFIRM  
PASSWORD: ****  
ENTER  
ENTER  
TV SET-UP  
V-CHIP SET  
ON/OFF TIMER  
PICTURE  
⟨
0–9/ENTER/CANCEL/MENU  
⟩
⟨
0–9/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
"
"appears instead of the number.  
V-CHIP SET menu appears.  
*
NOTES: • If you forget the password, you cannot set the V-Chip.  
• To avoid to forget the password, take note and keep in a safe place.  
25  
545A201A-E/P20-29  
25  
19*04*0, 17*12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE V-CHIP  
(CONTINUED)  
TO SET THE V-CHIP  
In the V-CHIP SET menu, press the SET/  
Press the SET/TRACKING + or – button to  
TRACKING + or – button to select the TV  
RATING, then press the ENTER button.  
display the desired setting, then press the  
ENTER button.  
1
2
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
V-CHIP SET  
V-CHIP  
V-CHIP SET  
V-CHIP  
: OFF  
: OFF  
TV RATING  
: TV–PG  
TV RATING  
: TV–PG  
MOVIE RATING  
CHANGE PASSWORD  
: PG–13  
MOVIE RATING  
CHANGE PASSWORD  
: PG–13  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/ST
MENU  
1
2 3  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING + or – button to  
select the MOVIE RATING, then press the  
ENTER button  
3
OFF  
TV-Y  
:
:
TV RATING is not set  
All children  
TV-Y7 :  
TV-G :  
TV-PG:  
TV-14 :  
TV-MA:  
7 years old and above  
General Audience  
Parental guidance  
14 years old and above  
17 years old and above  
–
SET/TRACKING  
+
ENTER  
V-CHIP SET  
V-CHIP  
: OFF  
• When you select TV- Y7, TV-PG, TV-14 or TV-MA,  
press the CALL button to show the contained rating.  
TV RATING  
: TV–PG  
MOVIE RATING  
CHANGE PASSWORD  
: PG–13  
Press the SET/TRACKING + or – button to select the  
desired item you want. Press the ENTER button to  
select OFF.  
⟨
+/–/ENTER/MENU  
⟩
NOTE: The V-Chip function is activated only on programs and tapes that have the rating signal.  
26  
545A201A-E/P20-29  
26  
19*04*0, 17*12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the SET/TRACKING + or – button to select desired rating, then ENTER button.  
4
OFF  
G
PG  
:
:
:
MOVIE RATING is not set  
All ages  
Parental guidance  
–
SET/TRACKING  
+
ENTER  
PG-13 : Parental guidance  
less than 13 years old  
R
:
Under 17 years old  
Parental guidance suggested  
V-CHIP SET  
V-CHIP  
: OFF  
TV RATING  
: TV–PG  
MOVIE RATING  
CHANGE PASSWORD  
: PG–13  
NC17 : 17 years old and above  
X
:
Adult only  
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
7
MUTIN
Y
–
P
SPEED  
A
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TV/CAP/  
5
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
6
+
SEASRKCIHP  
CANCEL  
TEXT  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
4
O
Press the SET/TRACKING  
+ or – button to select  
V-CHIP SET.  
Press the MENU button until  
the MENU screen is cleared.  
Press the ENTER button to  
Display ON.  
5
6
7
–
SET/TRACKING  
+
ENTER  
MENU  
V-CHIP SET  
V-CHIP  
V-CHIP SET  
: OFF  
V-CHIP  
: ON  
TV RATING  
: TV–PG  
TV RATING  
: TV–PG  
MOVIE RATING  
CHANGE PASSWORD  
: PG–13  
MOVIE RATING  
: PG–13  
CHANGE PASSWORD  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
To use the TV after the TV is protected  
When the program applied to the V-Chip setting is received, enter the password, then press the ENTER button.  
When the password is right, the protection will be canceled.  
27  
545A201A-E/P20-29  
27  
19*04*0, 17*12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE V-CHIP  
(CONTINUED)  
TO CHANGE PASSWORD  
1. Press the MENU button.  
2. Press the SET/TRACKING + or – button to select the TV SET-UP, then press  
the ENTER button.  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
3. Press the SET/TRACKING + or – button to select the V-CHIP SET, then press  
the ENTER button.  
TV SET-UP  
V-CHIP SET  
ON/OFF TIMER  
PICTURE  
⟨
+/–/ENTER/MENU  
⟩
4. Enter the Password using the Direct channel Selection button (0-9), then  
press the ENTER button.  
V-CHIP SET  
PASSWORD: – – – –  
⟨
0–9/ENTER/CANCEL/MENU  
⟩
5. Press the SET/TRACKING + or – button to select CHANGE PASSWORD,  
then press the ENTER button.  
V-CHIP SET  
V-CHIP  
: ON  
TV RATING  
: TV–PG  
MOVIE RATING  
: PG–13  
CHANGE PASSWORD  
⟨
+/-/ENTER/CANCEL/MENU  
⟩
6. Enter the new password using the Direct Channel Selection button (0-9),  
then press the ENTER button.  
V-CHIP SET  
V-CHIP  
: ON  
TV RATING  
: TV–PG  
MOVIE RATING  
: PG–13  
CHANGE PASSWORD  
NEW  
PASSWORD: – – – –  
⟨
0–9/ENTER/CANCEL/MENU  
⟩
7. Enter the same password again for the safety, then press the ENTER button.  
8. Press the MENU button repeatedly to return to normal screen.  
V-CHIP SET  
V-CHIP  
: ON  
TV RATING  
: TV–PG  
MOVIE RATING  
: PG–13  
CHANGE PASSWORD  
CONFIRM  
PASSWORD: – – – –  
⟨
0–9/ENTER/CANCEL/MENU  
⟩
28  
545A201A-E/P20-29  
28  
19*04*0, 17*12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO SET THE ON TIMER  
This feature allows you to have the TV/VCR automatically turn “ON” at a predetermined time. If you program the  
“ON” timer once, the TV/VCR will turn “on” on the programmed day (daily/weekly) at the same time to the  
same channel.  
EXAMPLE: Turning on the TV to channel 12 at 7:00 AM, MONDAY-FRIDAY.  
Press the MENU button.  
Press the SET/TRACKING + or  
– button to select the TV SET-UP  
Press the SET/TRACKING +  
or – button to select the ON/  
OFF TIMER option, then press  
the ENTER button.  
Press the SET/TRACKING +  
or – button to select the ON  
TIMER option, then press the  
ENTER button.  
1
2
3
option, then press the ENTER button.  
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
SET/TRACKING  
+
ENTER  
–
ENTER  
MENU  
M E N U  
TV SET-UP  
ON/OFF TIMER  
TIMER REC SET  
ON TIMER  
V-CHIP SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
12:00AM CH001  
MON-SAT  
ON/OFF TIMER  
PICTURE  
CANCEL  
CANCEL  
OFF TIMER  
12:00AM  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
6
INPUT SELECT  
CHANNEL  
0
9
–
1
6
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
Y
MUTIN
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
1 6  
ST  
OP  
SET/TRA  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
–
SEASRKCIHP  
TV/CAP/  
TEXT  
1
CANCEL  
6
COUNTER  
RESET  
TIMER REC  
ZER  
RETU  
O
RN  
Press the SET/TRACKING  
+ or – button to set the  
desired hour, then press the  
ENTER button.  
Set the desired minute,  
Press the SET/TRACKING +  
or – button to select the SET  
mode, then press the ENTER  
channel and daily or weekly  
timer date as in step 4, then  
press the ENTER button.  
4
5
6
button. Press the MENU button  
repeatedly to return to normal screen.  
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
–
SET/TRACKING  
+
MENU  
ENTER  
ON/OFF TIMER  
ON/OFF TIMER  
ON/OFF TIMER  
ON TIMER  
ON TIMER  
ON TIMER  
7:00AM CH001  
MON-SAT  
7:00AM CH012  
MON-FRI  
7:00AM CH012  
CANCEL  
CANCEL  
CANCEL  
CANCEL  
MON-FRI  
SET  
OFF TIMER  
12:00AM  
OFF TIMER  
12:00AM  
OFF TIMER  
12:00AM  
CANCEL  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
+/–/ENTER/CANCEL/MENU  
⟨ ⟩  
NOTES: • The TV/VCR will automatically turn off approximately 1 hour later after the ON TIMER turns on if no OFF TIMER  
has been set. To continue watching the TV, press any button to cancel the one hour automatic shut off.  
• To cancel ON timer, follow above steps 1-5, then press the SET/TRACKING + or – button to select the CANCEL.  
Press the MENU button repeatedly to return to the normal screen.  
• After setting the ON TIMER, " " of the OFF TIMER will flash on and off. If you wish to set the OFF TIMER, press  
the ENTER button then follow the steps 4-6 on page 30.  
• If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then  
press the SET/TRACKING + or – button to correct the desired setting.  
29  
545A201A-E/P20-29  
29  
19*04*0, 17*12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO SET THE OFF TIMER  
This feature allows you to have the TV/VCR turn “OFF” automatically at a predetermined time. If you program  
the OFF TIMER once, the TV/VCR will automatically turn off at the same time everyday.  
EXAMPLE: Turning off the TV at 11:30 PM.  
Press the MENU button.  
Press the SET/TRACKING + or –  
button to select the TV SET-UP  
Press the SET/TRACKING +  
or – button to select the ON/  
OFF TIMER option, then  
press the ENTER button.  
Press the SET/TRACKING +  
or – button to select the OFF  
TIMER option, then press  
the ENTER button.  
1
2
3
option, then press the ENTER button.  
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
SET/TRACKING  
+
ENTER  
–
ENTER  
MENU  
M E N U  
TV SET-UP  
ON/OFF TIMER  
TIMER REC SET  
V-CHIP SET  
ON TIMER  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
7:00AM CH012  
MON-FRI  
ON/OFF TIMER  
PICTURE  
SET  
OFF TIMER  
12:00AM  
CANCEL  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
+/–/ENTER/CANCEL/MENU  
⟨ ⟩  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
–
1
6
3
EJECT  
CALL  
6
INPUT SELECT  
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
1 6  
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
–
CKING  
1
5
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING +  
or – button to set the desired  
hour, then press the ENTER  
button.  
Press the SET/TRACKING +  
or – button to set the desired  
minute, then press the ENTER  
button.  
Press the SET/TRACKING +  
or – button to select the SET  
mode, then press the MENU  
button repeatedly to return to  
5
6
4
the normal screen.  
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
MENU  
–
SET/TRACKING  
+
ON/OFF TIMER  
ON/OFF TIMER  
ON/OFF TIMER  
ON TIMER  
ON TIMER  
ON TIMER  
7:00AM CH012  
MON-FRI  
7:00AM CH012  
MON-FRI  
7:00AM CH012  
MON-FRI  
SET  
SET  
SET  
SET  
OFF TIMER  
11:00PM  
OFF TIMER  
11:30PM  
OFF TIMER  
11:30PM  
CANCEL  
CANCEL  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
+/–/ENTER/CANCEL/MENU  
⟨ ⟩  
NOTES: • To cancel OFF timer, follow above step 1-5, then press the SET/TRACKING + or – button to select the  
CANCEL. Press the MENU button to return to the normal screen.  
• To confirm the ON/OFF TIMER:  
Press the PROGRAM button twice to indicate the programs on the screen.  
30  
545A201A-E/P30-39  
30  
19*04*0, 17*09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL ADJUSTMENTS  
Picture controls are factory preset but you can adjust them individually as follows:  
To display the picture adjustment screen, press the  
MENU button.  
Press the SET/TRACKING + or – button to select the  
TV SET-UP option, then press the ENTER button.  
Press the SET/TRACKING + or – button to select  
the PICTURE option, then press the ENTER button.  
1
2
–
SET/TRACKING  
+
MENU  
ENTER  
–
SET/TRACKING  
+
ENTER  
M E N U  
TV SET-UP  
V-CHIP SET  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
ON/OFF TIMER  
PICTURE  
⟨
+/–/ENTER/MENU  
⟩
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
6
INPUT SELECT  
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
1
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TV/CAP/  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
1 2  
SEASRKCIHP  
CANCEL  
TEXT  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
BRIGHTNESS  
CONTRAST  
Press the ENTER button until “BRIGHTNESS” appears  
on the screen, then press the SET/TRACKING + or –  
button to adjust the brightness of the picture. When  
the SET + button is pressed, the darker portions of  
the picture become lighter.  
Press the ENTER button until “CONTRAST” appears  
on the screen, then press the SET/TRACKING + or –  
button to adjust the contrast of the picture. Pictures look  
sharpest in the daytime (bright light) by increasing the  
contrast. At night (dim light), the sharpest picture is  
obtained by reducing the contrast.  
–
SET/TRACKING  
+
ENTER  
ENTER  
–
SET/TRACKING  
+
BRIGHTNESS  
0
CONTRAST  
32  
NOTE: The CONTRAST default  
setting is set to maximum  
at the factory.  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU  
button three times. The settings can only be adjusted when they are displayed on the TV screen.  
31  
545A201A-E/P30-39  
31  
19*04*0, 17*09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL ADJUSTMENTS  
(CONTINUED)  
COLOR  
TINT  
Press the ENTER button until “COLOR” appears on  
Press the ENTER button until “TINT” appears on the  
screen, then press the SET/TRACKING + or – button  
to adjust the tint of the picture. This determines how  
accurately the colors are reproduced by the TV.  
Adjusting the tint for natural facial tone is the best  
method of obtaining accurate color reproduction of  
the entire picture.  
the screen, then press the SET/TRACKING + or –  
button to adjust the color intensity of the picture. The  
control should be set when colors appear normal in  
intensity and brilliance.  
–
SET/TRACKING  
+
ENTER  
–
SET/TRACKING  
+
ENTER  
COLOR  
0
TINT  
0
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
PO  
WER  
1
SLEEP  
4
8
5
2
TV MONI.  
7
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
SPEED  
A
USE/ST
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
SHARPNESS  
CANCEL  
Press the ENTER button until “SHARPNESS” appears  
on the screen, then press the SET/TRACKING + or  
– button to adjust the sharpness of the picture.  
Pressing the CANCEL button while making picture  
adjustments will return all adjustments to the factory  
preset levels.  
CANCEL  
–
SET/TRACKING  
+
ENTER  
SHARPNESS  
0
⟨
+/–/ENTER/CANCEL/MENU  
⟩
32  
545A201A-E/P30-39  
32  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOADING AND UNLOADING A VIDEO CASSETTE  
Use only video cassette tapes marked  
.
LOADING  
Push the center of the tape until it is automatically retracted into the TV/VCR.  
AUTOMATIC POWER ON AND PLAY  
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically  
and playback will start immediately.  
Insert the cassette with its labeled side facing you.  
An inverted video cassette cannot be inserted.  
2
1
UNLOADING  
To unload a video cassette, press the EJECT  
button on the remote control, or press the Stop/  
Eject button on the TV/VCR twice. The first  
press will stop the tape in any mode. The second  
press will eject the tape.  
Pull the cassette out.  
1
2
Stop/  
Eject  
EJECT  
OR  
AUTOMATIC EJECT  
If the TV/VCR automatically rewinds the tape to the  
beginning (AUTO REWIND FEATURE), the tape will  
be ejected automatically. (See NOTE on page 40.)  
NOTES: • Always eject the tape when not in use.  
• The cassette tape can be ejected even if the POWER is “OFF”.  
33  
545A201A-E/P30-39  
33  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOADING AND UNLOADING A VIDEO CASSETTE (CONTINUED)  
TO PREVENT ACCIDENTAL ERASURE  
TO RECORD AGAIN  
Cover the hole with vinyl tape.  
Be careful the tape does not extend past the edges of  
the video cassette housing.  
After recording, break off the erase prevention tab if  
you do not wish to record over the tape.  
Screwdriver  
Erase prevention tab  
Vinyl tape  
TAPE SPEED AND MAXIMUM PLAYBACK/RECORDING TIME  
VIDEO CASETTE TAPE  
TAPE SPEED  
T-160  
T-120  
T-90  
T-60  
T-30  
SP (Standard Play)  
LP (Long Play)  
2-2/3 hours  
5-1/3 hours  
8 hours  
2 hours  
4 hours  
6 hours  
1-1/2 hours  
3 hours  
1 hour  
2 hours  
3 hours  
30 minutes  
1 hour  
SLP (Super Long Play)  
4-1/2 hours  
1-1/2 hours  
34  
545A201A-E/P30-39  
34  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
To play a prerecorded tape.  
TO START PLAYBACK  
Load a prerecorded tape. (When loading a  
cassette tape without the erase prevention tab,  
playback will start automatically.)  
To turn on the TV/VCR, press the POWER button.  
1
2
POWER  
PO  
WER  
1
SLEEP  
1
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
6
INPUT SELECT  
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
3
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TO STOP PLAYBACK  
Press the STOP button once. The tape will stop, but  
remain fully loaded and ready to play.  
“ ■” will appear on the screen.  
Press the PLAY button to begin playback.  
3
“
” will appear on the screen.  
PLAY  
STOP  
NOTE: This TV/VCR selects the tape speed SP, LP or SLP automatically.  
35  
545A201A-E/P30-39  
35  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
(CONTINUED)  
TO REWIND OR FORWARD THE TAPE RAPIDLY  
Press the REW (Rewind) button in the Stop mode.  
Press the F.FWD (Fast Forward) button in the Stop  
“
” will appear on the screen.  
mode. “ ” will appear on the screen.  
F.FWD  
REW  
FORWARD/REVERSE PICTURE SEARCH  
If you want to see the tape during REW or FWD mode, press and hold the REW or F.FWD button. The backward  
or forward visual search picture will be seen on the screen. Release to return to the REW or FWD mode.  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/ST
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TO MONITOR A TV PROGRAM  
DIGITAL TRACKING CONTROLS  
Press the TV MONI.(Monitor)  
button while in the playback mode.  
The video tape will continue to  
play while the picture switches to  
the TV channel selected on the  
TV/VCR. Press the button to  
return to the playback picture.  
When a tape is played, the Digital Auto Tracking system automatically  
adjusts the tracking to obtain the best possible picture. If noise bars appear  
during playback, adjust the tracking manually as follows:  
Press the SET/TRACKING + or – button to obtain the best possible picture.  
•
“MANUAL TR.” will appear for 4 seconds on the screen. To resume  
automatic tracking, press theAUTO TRACKING button. “AUTO TR.” will  
appear for 4 seconds on the screen.  
AUTO  
–
SET/TRACKING  
+
TV MONI.  
TRACKING  
MANUAL TR.  
–
AUTO TR  
.
+
36  
545A201A-E/P30-39  
36  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
TO VISUALLY SEARCH FOR DESIRED POINTS  
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear.  
When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP,  
LP or SLP) during recording. See chart below.  
To rewind or fast forward a tape, press the STOP button, and then press the REW or F.FWD button.  
To visually search backward, press the REW button  
once or twice in the PLAYBACK mode.  
To visually search forward, press the F.FWD button  
once or twice in the PLAYBACK mode.  
REW  
F.FWD  
Press the PLAY button to resume normal viewing  
speed.  
Press the PLAY button to resume normal viewing  
speed.  
SPEED SEARCH TIMES  
PO  
WER  
1
SLEEP  
PICTURE SEARCH SPEED  
TAPE SPEED  
4
5
2
TV MONI.  
7
8
PRESS  
TWICE  
PRESS  
ONCE  
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
SP (Standard Play)  
LP (Long Play)  
3 X  
7X  
5 X  
9X  
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
SLP (Super Long  
Play)  
9 X  
15 X  
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TO WATCH STILL PICTURE  
SKIP SEARCH  
Press the SKIP SEARCH button in the PLAY mode. The VCR will  
search forward through approximately 30 seconds of the tape (e.g.  
unwanted commercial time) for each press of the SKIP SEARCH  
button (maximum six presses) and then resume normal playback.  
Press the PAUSE/STILL button in the  
PLAYBACK mode.  
PAUSE/STILL  
For example : 1 press: 30 seconds of tape  
2 press: 60 seconds of tape  
3 press: 90 seconds of tape  
SKIP  
SEARCH  
Press the PLAY button or PAUSE/  
STILL button to resume normal  
playback.  
NOTES: • Best results during speed search and still playback can be obtained with video cassettes recorded in the  
"SLP" mode.  
• The audio output is muted during Speed Search and Still.  
• A few noise bars will appear on the TV screen during Speed Search and Still.  
• To prevent damage to the tape, Still and Speed Search mode is automatically changed to the  
Playback mode after 5 minutes.  
37  
545A201A-E/P30-39  
37  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
(CONTINUED)  
TO WATCH A TAPE REPEATEDLY  
Press the MENU button.  
Press the SET/TRACKING + or – button to  
2
select the AUTO REPEAT option.  
1
MENU  
–
SET/TRACKING  
+
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
1 4  
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
2
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
3
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the ENTER button to select the ON  
position.  
Press the MENU button. If you press the PLAY  
button, the tape will play over and over until the  
repeat mode is canceled.  
4
3
ENTER  
MENU  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
NOTE: To cancel repeat mode, follow above steps 1 and 2, then press the ENTER button to select the OFF position.  
Press the MENU button to return to the TV.  
The repeat function is canceled automatically when the unit is switched off or the tape is ejected.  
38  
545A201A-E/P30-39  
38  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING A TV PROGRAM  
RECORDING AND VIEWING THE SAME TV PROGRAM  
To turn on the TV/VCR, press the POWER  
button.  
Load a cassette tape with the erase prevention  
tab intact.  
1
2
POWER  
PO  
WER  
1
SLEEP  
1
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
Q
+
UICK VIEW  
TR  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
3
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SPEED selector button to select the  
desired tape speed SP, LP or SLP. The counter  
and SP, LP or SLP will appear on the screen  
about 4 seconds.  
Set the TV/CATV option to the appropriate  
position. (See page 22.)  
3
4
SPEED  
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
:
:
00 00 00 SP  
NOTES: • If power is switched off during recording, the TV set goes off and the VCR continues to record. Press the  
STOP button to halt the recording and turn off the VCR.  
• The TV/VCR Channel cannot be changed during recording.  
39  
545A201A-E/P30-39  
39  
19*04*0, 17*10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING A TV PROGRAM  
(CONTINUED)  
Press the Direct Channel Selection buttons or  
CHANNEL + or – button to select the channel  
to be recorded. (Example: Channel 12)  
Press the REC/OTR button.  
“ ●” and the channel number will appear on  
the screen and the Rec/Otr indicator will light.  
5
6
CHANNEL  
0
2
1
REC/OTR  
OR  
CH 012  
CH 012  
Rec/Otr  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
6
INPUT SELECT  
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
5
OLUME  
6
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TO STOP RECORDING  
TO STOP RECORDING TEMPORARILY  
Press the PAUSE/STILL button to avoid recording unwanted material.  
” will appear on the screen and the Rec/Otr indicator will blink on  
Press the STOP button to stop  
recording.  
“
and off. Press the PAUSE/STILL button or the REC/OTR button to  
continue the recording.  
“ ■” will appear on the screen.  
PAUSE/STILL  
STOP  
or  
Rec/Otr  
NOTE:  
The PAUSE mode will be changed to STOP mode after five minutes to  
prevent damage to the tape.  
NOTES: • AUTO REWIND FEATURE  
This TV/VCR will automatically rewind the video cassette when the tape has ended (except during OTR  
and Timer Record). It will also eject the video cassette.  
• If the erase prevention tab is removed, the tape will eject when the REC/OTR button is pressed for recording.  
40  
545A201A-E/P40-53  
40  
17*04*0, 19*28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE-TOUCH TIMER RECORDING (OTR)  
The One-Touch Timer Recording feature provides a simple and convenient way to make a timed recording.  
EXAMPLE: One-touch Timer Recording for 30 minutes.  
Press the SPEED Select  
Button to select the desired  
tape speed (SP, LP or SLP).  
SP, LP or SLP will appear on  
the screen.  
Load a video cassette  
with the erase prevention  
tab intact.  
Press the POWER button  
to turn on the TV/VCR.  
1
2
3
POWER  
SPEED  
PO  
WER  
1
SLEEP  
1
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
6
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
3
F
.FWD  
PR  
OGRAM  
5
–
ST  
OP  
SET/TRA  
TRA  
AU  
CKING  
T
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the REC/OTR button  
to begin recording. Press the  
button again to stop recording  
Press the Direct Channel  
Set the TV/CATV option  
to the appropriate setting.  
Selection buttons or CHANNEL  
+ or – button to select the  
channel to be recorded.  
(Example: Channel 12)  
6
4
5
after 30 minutes. Each additional  
press of the REC/OTR button will  
increase recording time as shown  
below, up to a maximum of 5 hours.  
“OTR” will appear on the screen.  
CHANNEL  
2
0
1
TV  
- VHF/UHF channels  
OR  
CATV - CABLE TV channels  
REC/OTR  
OTR 0 : 30  
CH 012  
CH 012  
NOTES: • Press the REC/OTR button to increase the time needed for recording. (See the chart below.)  
Press  
twice  
3 times  
4 times  
5 times  
6 times  
7 times  
8 times  
9 times  
once  
1:00  
1:30  
4:00  
5:00  
Recording time  
0:30  
2:00  
3:00  
NORMAL REC  
NORMAL REC  
• To cancel OTR, press the STOP button.  
• The TV/VCR channel cannot be changed during recording.  
41  
545A201A-E/P40-53  
41  
17*04*0, 19*28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic  
unattended recording of up to 8 programs within 1 month.  
EXAMPLE: Program a timer recording for 23rd day, channel 007 (CATV), 7:00 - 9:30 PM (Tape speed : SLP)  
Load a video cassette with the erase prevention tab intact. The TV/VCR will automatically turn on.  
Set the TV/CATV selection to the appropriate position. (see page 22.)  
•
•
Press the MENU button.  
Check the TIMER REC SET option is selected,  
1
2
then press the ENTER button.  
MENU  
ENTER  
M E N U  
TIMER REC SET  
TV SET-UP  
CH SET-UP  
AUTO REPEAT ON OFF  
SYSTEM SET-UP  
⟨
+/–/ENTER/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
Q
+
UICK VIEW  
TR  
V
OLUME  
REW  
–
+
1
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
3 4  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
2
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the SET/TRACKING + or – button to  
select the date, then press the ENTER button.  
Press the SET/TRACKING + or – button to  
select the PROGRAM position, then press the  
ENTER button.  
3
4
–
SET/TRACKING  
+
–
SET/TRACKING  
+
ENTER  
ENTER  
TIMER REC SET  
----- --:-- --:-- --- -  
----- -- -- -- -- --- -  
----- --:-- --:-- --- -  
----- --:-- --:-- --- -  
----- --:-- --:-- --- -  
----- --:-- --:-- --- -  
----- --::-- --::-- --- -  
----- --:-- --:-- --- -  
DATE  
START  
END  
23 (THU)  
:
:
8
30 AM  
-- --  
012  
SP  
CH  
SPEED  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
NOTES: • If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention tab,  
the Timer Recording is not possible. If a tape without an erase prevention tab is in the TV/VCR, the tape  
will be ejected.  
• To record from the external equipment press the SET/TRACKING + or – button repeatedly until "L" appears  
when setting the channel in step 5.  
42  
545A201A-E/P40-53  
42  
17*04*0, 19*28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the start time, end time, channel and tape speed as in step 4.  
5
–
SET/TRACKING  
+
ENTER  
TIMER REC SET  
23 TH 7:00  
9:30PM 007 SLP  
------- --PM-- -- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------::-- --::-- --- -  
-------:-- --:-- --- -  
DATE  
START  
END  
23 (THU)  
:
:
7
9
00 PM  
30 PM  
CH  
007  
SPEED  
SLP  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/ST
MENU  
5
F
.FWD  
PR  
OGRAM  
–
ST  
OP  
SET/TRA  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
7
O
To set the timer for another program, press the  
SET/TRACKING + or – button until the number  
of the second program blinks, then press the  
ENTER button. Repeat steps 4 to 5 to set the  
second program.  
Press the TIMER REC button. The T-Rec  
indicator will light. The Timer is programmed,  
when the programmed time is reached, the  
recording is automatically started.  
6
7
TIMER REC  
4
5
T-Rec  
To cancel timer recording, press the button again and  
T-Rec indicator will go out.  
NOTES: • The VCR section cannot be used while the T-Rec indicator is lit. If you want to use the VCR operation,  
press the TIMER REC button to deactivate the timer.  
• After a power failure or disconnection of the power plug, all programmed recording setting and time display  
will be lost upon resumption of power. In this case, reset the clock (see pages 15-17.) and reprogram any  
timer recordings.  
• If you want to correct the digits while setting, press the CANCEL button until the item you want to  
correct, then press the SET/TRACKING + or – button to correct the desired setting.  
43  
545A201A-E/P40-53  
43  
17*04*0, 19*28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER FUNCTIONS FOR THE TIMER RECORDING  
TO SET DAILY/WEEKLY TIMER  
When setting the date in the step 4 on page 42, press the SET/TRACKING – button repeatedly when the current  
day is displayed.  
The setting changes as follows;  
Example  
The current day (Friday)  
SUN-SAT (Sunday to Saturday)  
MON-SAT (Monday to Saturday)  
MON-FRI (Monday to Friday)  
WKL-THU (Weekly Thursday)  
One month later  
minus one day  
WKL-WED  
(Weekly Wednesday)  
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
TO CONFIRM THE SETTINGS  
Press the PROGRAM button once. The TV screen displays the timer program list.  
Press the PROGRAM button again. The TV screen display the ON/OFF timer setting.  
(once)  
(twice)  
PROGRAM  
23 TH 7:00  
9:30PM 007 SLP  
ON/OFF TIMER  
------- --PM-- -- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------:-- --:-- --- -  
-------::-- --::-- --- -  
-------:-- --:-- --- -  
ON TIMER  
7:00AM CH012  
MON-FRI  
SET  
SET  
OFF TIMER  
11:30PM  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
⟨
+/–/ENTER/CANCEL/MENU  
⟩
Press the PROGRAM button 3 times. The screen returns to the normal screen.  
NOTES: • The everyday/every week recording can be made continuously until the recording is canceled or the tape  
reaches the end.  
• During timer recording, the automatic rewinding mechanism does not function.  
• You can correct or cancel the programmed setting in program confirm mode.  
44  
545A201A-E/P40-53  
44  
17*04*0, 19*28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO CANCEL A PROGRAM  
Press the SET/TRACKING + or – button to select the TIMER REC SET option in the MENU, then press the  
ENTER button.  
Press the SET/TRACKING + or – button to select the unnecessary program, and press the CANCEL button to  
cancel the program.  
CANCEL  
----- --:-- --:-- --- -  
----- -- -- -- -- --- -  
----- --:-- --::-- --- -  
----- --:-- --:-- --- -  
----- --:-- -- -- --- -  
----- --:-- --:-- --- -  
----- --::-- --::-- --- -  
----- --:-- --:-- --- -  
⟨
+/–/ENTER/CANCEL/MENU  
⟩
PO  
WER  
1
SLEEP  
4
5
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
IF THE PROGRAM OVERLAPS ANOTHER  
NOTE: Do not overlap programs as portions of the conflicting programs will be lost. The first recording time has  
priority over the next recording time as shown in the diagram.  
8 : 00  
9 : 00  
10 : 00  
11 : 00  
Program 1  
Program 2  
Deleted Parts  
Program 3  
Non Recorded Portion Parts  
Recording  
Control Settings  
Prog.1  
Prog.2  
Prog.3  
45  
545A201A-E/P40-53  
45  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REAL TIME TAPE COUNTER  
The On-Screen Real Time Tape Counter shows the tape running time in Hours, Minutes and Seconds.  
You can easily determine how long the tape has been running or how much time is left on the tape.  
TO VIEW THE COUNTER DISPLAY  
Press the CALL button to display the Real Time  
Tape Counter.  
Press the COUNTER RESET button to set the  
counter to “00:00:00”.  
1
2
COUNTER  
RESET  
CALL  
:
:
8 40AM THU  
CH 012  
8 40AM THU  
CH 012  
:
:
:
:
00 30 50 SP  
00 00 00 SP  
PO  
WER  
1
SLEEP  
4
5
1 4  
2
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
Q
+
UICK VIEW  
TR  
V
OLUME  
REW  
–
3
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/ST
MENU  
F
.FWD  
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
TRA  
AU  
T
CKING  
ENTER  
2
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
O
Press the PLAY or REC/OTR button to start  
the tape, the counter will display the elapsed  
time.  
When you wish to make the counter disap-  
pear, press the CALL button once again.  
3
4
PLAY  
CALL  
REC/OTR  
OR  
NOTES: If you rewind the tape from “00:00:00”, a minus sign (“–”) will be displayed in front of the time.  
•
When you load a tape, the counter will reset to “00:00:00”.  
The counter does not function on nonrecorded (blank) sections of the tape. When you rewind,  
fast forward or play tapes through blank sections, the counter stops.  
•
•
46  
545A201A-E/P40-53  
46  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING ZERO RETURN  
The zero return function provides a convenient method of rapidly returning to the starting point of recording  
or playback. The starting point can be indexed for any location on the tape by pressing the COUNTER  
RESET button and ZERO RETURN button.  
Press the CALL button to display the counter.  
Before playback or recording, press the  
COUNTER RESET button to set the counter  
to “00:00:00”.  
1
2
CALL  
COUNTER  
RESET  
:
:
8 40AM THU  
CH 012  
8 40AM THU  
CH 012  
:
:
:
:
00 30 50 SP  
00 00 00 SP  
PO  
WER  
1
SLEEP  
4
5
2
1
TV MONI.  
7
8
3
EJECT  
CALL  
INPUT SELECT  
6
CHANNEL  
0
9
REC/O  
TR  
Q
+
UICK VIEW  
V
OLUME  
REW  
–
3
+
PLA  
MUTIN
Y
–
P
A
SPEED  
USE/STI
MENU  
F
.FWD  
4
PR  
OGRAM  
–
ST  
SET/TRA  
OP  
2
TRA  
AU  
T
CKING  
ENTER  
CKING  
O
+
SEASRKCIHP  
TV/CAP/  
TEXT  
CANCEL  
COUNTER  
RESET  
TIMER REC  
ZER  
RETURN  
5
O
Press the ZERO RETURN  
button. The tape will rewind  
and automatically stop at  
the “00:00:00” position.  
Begin playback or recording.  
Press the STOP button.  
3
5
4
PLAY  
REC/OTR  
ZERO  
RETURN  
OR  
STOP  
:
8 40AM THU  
CH 012  
:
:
00 00 00 SP  
47  
545A201A-E/P40-53  
47  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUPLICATING A VIDEO TAPE  
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.  
Make all connections before turning on the power.  
Press the INPUT SELECT button to select  
AUDIO/VIDEO input position. The "LINE" will  
appear on the screen.  
Insert a blank cassette with the erase preven-  
tion tab intact into the TV/VCR.  
Insert a previously recorded cassette into the  
playback VCR or Camcorder.  
1
2
INPUT SELECT  
LINE  
CONNECTION TO ANOTHER VCR  
CONNECTION TO CAMCORDER  
For duplicating a previously recorded tape from a camcorder,  
follow the camcorder manufacturer’s instructions. A typical  
camcorder dubbing hookup is shown below.  
RECORDING TV/VCR  
PLAYBACK  
CAMCORDER  
RECORDING TV/VCR  
PLAYBACK VCR  
To AV Jack  
AUDIO/VIDEO CORD  
(NOT SUPPLIED)  
TO VIDEO  
OUT  
TO AUDIO OUT  
TO AUDIO  
IN  
TO VIDEO IN  
To VIDEO/AUDIO IN  
AUDIO/VIDEO CORD (NOT SUPPLIED)  
Press the PAUSE/STILL  
buttons on both units  
simultaneously to begin the  
duplicating process.  
Press the REC/OTR button  
on the remote control of the  
TV/VCR, then press the  
PAUSE/STILL button.  
Press the PLAY Button on the  
playback VCR, then press the  
PAUSE/STILLbutton.  
3
4
5
PAUSE/  
STILL  
PAUSE/  
STILL  
PAUSE/STILL  
PLAY  
PAUSE/STILL  
REC/OTR  
NOTES:  
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.  
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials  
may infringe the rights of copyright owners and be contrary to copyright laws.  
•
•
48  
545A201A-E/P40-53  
48  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECEPTION DISTURBANCES  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television interfer-  
ence are shown below. If one of these symptoms appear when the TV/VCR is connected to a Cable TV system,  
the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected by tall buildings, hills or other large  
objects. Changing the direction or position of the antenna may improve the  
reception.  
SNOW  
If the TV/VCR is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a loss of  
contrast in the picture. Changing the direction and position of the antenna  
or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST or  
BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/VCR from the AC power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use  
caution when cleaning or wiping the plastic parts.  
49  
545A201A-E/P40-53  
49  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
Check the following chart before requesting service.  
SYMPTOMS  
POWER  
CAUSE  
POSSIBLE SOLUTIONS  
PAGE  
Connect the AC power cord to the  
AC outlet.  
The AC power cord is not connected.  
No power.  
7
Cassette is not inserted.  
33  
43  
Insert a video cassette.  
Although the power is on, the  
TV/VCR does not operate.  
TIMER REC button is depressed.  
Press the TIMER REC button.  
TV BROADCAST RECEPTION  
TV station experiencing problems.  
Picture control is not adjusted.  
Possible local interference.  
Try another channel.  
18  
Check picture control adjustments.  
31, 32  
Check for source of reception  
disturbance.  
49  
Poor or no picture.  
Antenna (CATV) connector is not  
connected or possible local  
interference.  
Check CATV connection or VHF/  
UHF antenna, reposition or rotate  
antenna.  
11, 13  
TV station experiencing problems.  
Picture control is not adjusted.  
Try another channel.  
18  
Check picture control adjustments.  
31, 32  
Check for source of reception  
disturbance.  
Possible local interference.  
Poor or no color.  
49  
Antenna (CATV) connector is not  
connected or possible local  
interference.  
Check CATV connection or VHF/  
UHF antenna, reposition or rotate  
antenna.  
11, 13  
18  
TV station experiencing problems.  
Try another channel.  
Antenna (CATV) connector is not  
connected or possible local interfer-  
ence.  
Check CATV connection or VHF/  
UHF antenna, reposition or rotate  
antenna.  
11, 13  
Picture wobbles or drifts.  
18  
13  
Cable TV channel is scrambled.  
CATV connector is not connected.  
Try another channel.  
Check all CATV connections.  
TV/CATV Mode menu option is set to  
the TV mode.  
Set the TV/CATV Menu option to  
the CATV mode.  
No CATV reception.  
No reception above  
22  
13  
22  
Cable TV service interrupted.  
Contact your Cable TV company.  
TV/CATV Mode menu option is not set Make sure TV/CATV menu option  
to the appropriate mode.  
is in the appropriate mode.  
Check UHF antenna.  
Try another channel.  
channel 13.  
11  
18  
UHF antenna is not connected.  
TV station experiencing problems.  
Antenna (CATV) connector is not  
connected or possible local  
interference.  
Check CATV connection or VHF/  
UHF antenna, reposition or rotate  
antenna.  
11, 13  
Poor or no sound.  
Check for source of reception  
disturbance.  
49  
19  
Possible local interference.  
Check that MUTING button has not  
been pressed.  
MUTING button is depressed.  
50  
545A201A-E/P40-53  
50  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUSE  
POSSIBLE SOLUTIONS  
Tune new channel.  
SYMPTOMS  
TV shuts off.  
PAGE  
TV station stopped broadcasting.  
18  
Sleep timer is set.  
Set Sleep Timer to "0".  
Try another channel.  
20  
TV station experiencing problems or  
program tuned is not closed captions.  
18, 20  
Check CATV connection of VHF/  
UHF antenna, reposition or rotate  
antenna.  
Closed caption is not  
activated.  
TV signal is weak.  
11, 13  
20, 21  
The TV/CAP/TEXT button is not  
depressed.  
Press the TV/CAP/TEXT button to  
turn on the closed caption.  
RECORDING  
The video cassette's erase prevention  
tab is broken off.  
Place a piece of vinyl tape over the  
hole.  
TV recording does not work.  
34  
17  
The time is not set correctly.  
Reset the present time.  
The recording start/end time is not set Reset the start/end time.  
correctly.  
42, 43  
Timer recording does not  
work.  
The TIMER REC button has not been  
pressed (the T-Rec indicator is not lit.).  
Press the TIMER REC button (the  
T-Rec indicator is lit.).  
43  
PLAYBACK  
Tape is old or worn.  
Replace the tape.  
—
36  
52  
Adjust tracking manually using the  
SET/TRACKING +/– buttons on  
the remote control.  
Noise bars appear on the  
screen.  
Tracking adjustment is beyond range  
of automatic tracking circuit.  
Video heads are dirty.  
Clean the video heads.  
REMOTE CONTROL  
The remote control is not aimed at the Aim the remote control at the  
sensor.  
remote sensor.  
10  
10  
10  
Distance is too far or too much light in Operate within 15 feet or reduce  
the room.  
the light of the room.  
Remote control does not  
operate.  
There is an obstacle in the path of the  
beam.  
Clear the path of the beam.  
The batteries are weak.  
Replace the batteries.  
10  
10  
The batteries are not inserted correctly. Insert correctly.  
FOR ADDITIONAL SET-UP INFORMATION OR CUSTOMER SERVICE  
PLEASE CALL:  
1-800-919-3647  
51  
545A201A-E/P40-53  
51  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO HEAD CLEANING  
VIDEO HEAD CLOGGING  
The video heads are the means by which the TV/VCR reads the picture from the tape during playback. In the unlikely  
event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be deter-  
mined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If  
this is the case, have the TV/VCR checked by qualified service personnel.  
Good Picture  
Snowy Picture  
VIDEO HEAD CLEANING  
AUTO HEAD CLEANING system cleans the video heads automatically when a cassette is inserted or ejected to  
prevent dirt from accumulating on the heads. However, manual head cleaning is needed if the picture on playback is  
still unclear although the picture on program is normal. This failure signifies that the head is getting dirty and occurs  
when playing poor quality or damaged tapes. If the heads require cleaning, use a high quality head cleaning system  
or have them cleaned professionally.  
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE TOP COVER.  
NOTE: Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.  
•
•
To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.  
52  
545A201A-E/P40-53  
52  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
13" (MVT2135B)  
19" (MVT2195B)  
TELEVISION  
Picture Tube:  
13" (measured diagonally)  
19" (measured diagonally)  
Horizontal Resolution:  
Tuner Type:  
260 lines  
Quartz PLL Frequency Synthesized  
Receiving Channels:  
VHF  
2-13  
UHF  
CATV  
14-69  
14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
Antenna Input:  
VHF/UHF In 75 ohms coaxial  
Speaker:  
Audio Output Power:  
1-1/2" x 2-1/2", 8 ohm x 1  
1.5W  
3", 8 ohm x 1  
1.5W  
VCR  
Video System:  
Video Signal:  
Cassette Tape:  
Audio Track:  
Tape Speed:  
VHS, 2 Rotary Heads Helical Scanning System.  
NTSC Color  
VHS  
1 Track  
SP: 33.35 mm/sec.  
LP: 16.67 mm/sec.  
SLP: 11.12 mm/sec.  
F.FWD/REW Time:  
Speed Search:  
Approx. 1 minute and 48 seconds (T-120 Cassette)  
SP 3 & 5 x Normal Speed  
LP 7 & 9 x Normal Speed  
SLP 9 & 15 x Normal Speed  
GENERAL  
Power Source:  
AC 120V 60Hz  
Power Consumption:  
Dimensions:  
Weight:  
70 Watts  
86 Watts  
W 19-1/2" x D 18-9/16" x H 19-1/16"  
48.7 Ibs  
W 14-1/4" x D 14-5/8" x H 15-1/16"  
27.6 Ibs  
Inputs:  
Video: (RCA) 1Vp-p 75 ohm  
Audio: (RCA) 300 mV/50K ohm  
–20°C to 60°C (–4°F to 140°F)  
5°C to 40°C (41°F to 104°F)  
Storage Temperature:  
Operating Temperature:  
Remote Control:  
Infrared, Direct Access, 2 x AAA batteries (not supplied)  
Accessories:  
Remote Control  
Remote Control  
Telescopic Antenna  
Specifications are subject to change without notice.  
53  
545A201A-E/P40-53  
53  
17*04*0, 19*29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
545A201A-S/P40-BACK  
54  
20*04*0, 10*44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
545A201A-S/P40-BACK  
55  
20*04*0, 10*44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINTED IN THAILAND  
IMPRESO EN TAILANDIA  
545A201A K  
00/03  
545A201A-S/P40-BACK  
56  
20*04*0, 10*44  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTM Motorcycle 400 640LC4 E6 User Manual
LG Electronics Cell Phone TM510 User Manual
LG Electronics Universal Remote 202B User Manual
Lindy TV Receiver 32898 User Manual
Logitech Video Game Controller 940 000117 User Manual
Makita Impact Driver BTD141Z User Manual
Martin Audio Portable Speaker Screen 6 User Manual
MasterCraft Nail Gun AIR POWERED BRAD NAILERS User Manual
MB QUART Speaker PCE210 User Manual
Mellerware Fryer 27100 User Manual