Memorex DVD Player MVD4540 User Manual

OWNER’S MANUAL

MANUAL DE INSTRUCCIONES

DVD PLAYER / Hi-Fi VIDEO CASSETE RECORDER

DVDCOMPACTOS/VIDEOGRABADORHi-FiESTEREO

MVD4540

ATTENTION

ATENCION

If you purchase a universal remote control from your local retailer, please contact the

remote manufacturer for the required programming code.

Si usted a comprado un control remoto universal, por favor comunicace con el fabricante

para el codico de programaccion requerido.

TV/CATV MODE SELECTION

SELECCION DE MODO DE TV/CATV

When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable

Television) mode.

If not using CATV (Cable TV), set this menu option to the "TV" mode.

Al salir la unidad de fábrica, la opción de menú de TV/CATV se ajusta al modo de

"CATV" (Televisión por cable).

Si no utiliza CATV, ajuste esta opción de menú al modo de "TV".

Before operating the unit, please read this manual thoroughly.

Antes de usar la unidad, lea detenidadmente este manual de instrucciones.

2A77001AE Cover

8/29/02, 10:52 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause

hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

PORTABLE CART WARNING

(symbol provided by RETAC)

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,

to ensure reliable operation of the unit, and to protect it from overheating.

S3125A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit

on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat

source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided and/or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not

sure of the type of power supply to your home, consult your appliance dealer or local power company. For

units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped

with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a ground-

ing-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact

your electrician to replace your obsolete outlet.Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the appliance.

2A77001AE(02-05)

8/29/02, 10:51 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the

unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits, as

contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short

out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is

grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for

the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged.

f . When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by

the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

22. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

25. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from

the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's

manual of the other equipment carefully and follow the instructions when making any connections.

2A77001AE(02-05)

8/29/02, 10:51 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS / Power Source

26. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the

laser beam. It may cause sight damage.

27. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

personal injury and product malfunction.

28. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

nected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

ANTENNA

GROUND CLAMP

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

CONDENSATION

Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a

warm room or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performance

will be impaired.

To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or

make sure that the room temperature rises gradually.

Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air

conditioner. In such cases, change the location of the DVD/VCR.

Power Source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert

AC Outlet

the AC cord plug into a standard 120V 60Hz polarized AC outlet.

Wider Hole

and Blade

NOTES:

Never connect the AC line cord plug to other than the specified

voltage (120V 60Hz). Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC

outlet, do not attempt to file or cut the blade. It is the user’s

responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the

unit fails to function, simply unplug the unit from the AC outlet

and plug it back in. The unit should return to normal operation.

•

Polarized AC Cord Plug

(One blade is wider than the other.)

2A77001AE(02-05)

8/29/02, 10:51 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

DVD/CD Player/Video Cassette Recorder

• DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video

cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher

than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs.

• High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400

lines) or Laser Disc (430 lines) in resolution.

VCR Section

• Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP) broadcasts where

available.

• 4 Video Heads - Provides optimal picture quality for special effects playback.

• 19µm HEAD - For superior picture quality even in SLP mode, 19micron width technology helps to avoid crosstalk and

boost SLP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.

• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this VCR

provides a level of excellence that rivals compact discs.

• One-touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed for up to 5

hours of recording with an immediate start.

DVD Section

• Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Optical or Coaxial):

• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of

being in a movie theater or a concert hall.

• DTS is a surround sound standard different from Dolby Digital. This format is already in use at many theaters. By

connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs

recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

• The MPEG audio of DVD discs recorded in this format can be enjoyed.

• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.

• Multi-Language - Since this DVD matches with 136 language-subtitles/-soundtracks, you can enjoy selecting a favorite

one. (You can not select the language that is not recorded on the disc.)

• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you

can change the angles during playback. (If a Multi-Angle is not recorded on the disc, you can not change the angle.)

• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.

•

Memory/Random Playback - You can play back tracks, titles or chapters in programmed or random-selected sequences.

• Zoom - You can zoom in on the selected subject on the screen during playback.

• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.

• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.

* This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents

and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision Corporation and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is

prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the

rights of copyright owners and be contrary to copyright laws.

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Before using your unit

Disc playback operation

IMPORTANT SAFEGUARDS ..........................3

Power Source...................................................5

Features ...........................................................6

Contents ...........................................................7

Parts and functions ..........................................8

Display .............................................................9

Remote control ...............................................10

Basic connections ..........................................12

CATV (CABLE TV) connections.....................14

Playback connection ......................................16

Disc ................................................................ 35

Setting setup language .................................. 36

Playback procedure........................................ 37

Special playback ............................................ 38

Zooming ......................................................... 39

Repeat playback............................................. 40

Memory playback/Random playback ............. 41

MP3 playback................................................. 42

Changing soundtrack language ..................... 43

Changing subtitles language.......................... 43

Changing angles ............................................ 44

Title selection ................................................. 44

DVD menu...................................................... 44

Setting up the VCR section

Setting the video channel............................... 18

Setting the language ...................................... 18

Auto clock setting ........................................... 19

Manual clock setting....................................... 21

Tuner setting................................................... 22

To ADD/DELETE channels ............................ 23

Noise elimination ............................................ 23

Loading and Unloading a cassette tape......... 24

Advanced function of DVD section

Parental control .............................................. 45

Setting menu language .................................. 47

Setting subtitle language................................ 48

Setting audio soundtrack language ................ 49

Setting the aspect ratio of TV screen ............. 50

Setting on screen display ............................... 51

Setting Audio .................................................. 52

Setting Operation ........................................... 53

Setting Background ........................................ 54

Setting Screen Saver (DVD only) ................... 54

Setting initial setup ......................................... 55

Output sound conversion table....................... 55

Status display of disc ..................................... 56

Table of languages ......................................... 57

Tape playback operation

Cassette tape playback .................................. 25

Special playback ............................................ 26

ZERO RETURN function................................ 27

Video index search system ............................ 27

Recording

Recording a TV program ................................ 28

One-touch Timer Recording (OTR) ................ 30

Timer recording .............................................. 31

Additional information

Problems and troubleshooting ....................... 58

Video head cleaning....................................... 59

Specifications ................................................. 60

Advanced function of VCR section

Stereo recording and playback ...................... 33

Separate Audio Program (SAP) ..................... 33

Duplicating a video tape................................. 34

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts and functions

Front

VCR/DVD mode selector button

Cassette Loading Slot

PLAY button

OPEN/CLOSE button

EJECT button

STOP button

Disc tray

DVD

VCR

POWER

VCR

CHANNEL

VCR/DVD

DVD

VIDEO IN

AUDIO IN

Display window

Remote sensor

buttons

POWER

button

DVD indicator

REW (Rewind) button

REC button

CHANNEL

AUDIO (L/R)/

VIDEO IN jacks

VCR indicator

FF (Fast Forward) button

Rear

AC power cord

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

RF IN jack

B/CB

AUDIO

OUT

DVD OPTICAL

DIGITAL AUDIO

OUT jack (dust

protection cap)

(

)

R/CR

RF OUT jack

CH.

3/4 Channel Selector Switch

DVD COAXIAL DIGITAL

AUDIO OUT jack

DVD/VCR common AUDIO (L/R)/VIDEO OUT

jacks

DVD AUDIO (L/R) OUT jacks

DVD S-VIDEO OUT jack

DVD COMPONENT OUT jacks

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Display

Display window

No. Display

Description

VCR

VCR mode

Playback (lights) / Auto resume (flashes)

Still picture

DVD disc is inserted.

DVD

CD is inserted.

Display for afternoon (not lit during morning hours)

Clock display (colon[ : ] flashes)

10 : 00

01 : 00

Counter display by hour/minute at VCR/DVD / by minute/second at CD

Track number display for CD

TV channel display for VCR

C002

C036

CATV channel display

External input display

Timer recording display

Video tape is in the unit

Track display for CD

TRK

REC

Normal recording display (flashes during One-touch Timer Recording - OTR)

Note:

Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Page

POWER

EJECT

Power on/off

Eject a cassette tape

OPEN/CLOSE

VCR/DVD

0-9

Open or Close the tray

Switch to operate VCR or DVD

Direct channel selection of TV

Input setting

18,40

23,28

Enter a password

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

Display VCR or DVD operation status

Switch the connected TV to external mode

29,56

DISPLAY/CALL

Select channel of the connected TV or VCR

28,30

INPUT SELECT

Cursor buttons

TRACKING/SET –/+ Setting buttons

Manual tracking buttons in playback mode

Cursor buttons

31,32

SELECT/ENTER Enter information in the menu

Select option in the menu

TRACKING/

SET

—

TRACKING/

SET

DVD MENU

Select menu of a DVD disc

18,36,45-55

SELECT/

ENTER

SET UP/VCR MENU Display menu of setup

CLEAR/CANCEL Delete Timer program

Cancel input data in the setting mode 21,31,39,41

RETURN

ZOOM

Remove DVD set up menu

Zoom (for DVD playback)

Select title of a DVD disc

SET UP/

VCR MENU

CLEAR/

DVD MENU

RETURN

CANCEL

TITLE

ZOOM

TITLE

REPEAT A-B

Repeat playback between A and B (DVD/CD) 40

AUDIO/AUDIO SELECT Switches sound between mono, stereo and SAP 33

AUDIO/

MEMORY/

ANGLE/

CLOCK/

Change sound track language of DVD

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

MEMORY

Arrange the order of titles, chapters or tracks 41

Stop the tape when the counter reaches 00:00 27

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

ZERO RETURN

ANGLE

Change playback angle of a DVD disc

REW/SEARCH

PLAY

SEARCH/F.FWD

COUNTER RESET Reset the counter to 00:00

CLOCK/COUNTER Change the front Display mode

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

TIMER REC

SUB TITLE

ATR

Set the unit to start recording at a preset time

31,32

Set Subtitle of a DVD disc

Digital AUTO TRACKING

Select playback mode

SLOW

PAUSE/STILL

PLAY MODE

SPEED

40,41

28,30

18,29

Sets the tape speed for recording

Switches between TV and VCR

Rewind/Review playback

Playback

TV/VCR

REW/SEARCH

PLAY

25,26,38

25,37

F.FWD/SEARCH

Fast Forward/Forward search playback 25,26,38

SKIP

Skip chapter to forward or reverse direction

Search for the INDEX mark of a tape

Stop

INDEX

STOP

25,37

REC/OTR

SLOW

Recording

28,30,34

26,38

Slowmotion playback

PAUSE/STILL

Still picture/Recording pause on/off 26,29,34,38

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Inserting Batteries

Open the battery

compartment cover in the

direction of the arrow.

Install two "AAA" batteries (not

supplied), paying attention to the

polarity diagram in the battery

compartment.

Replace the compartment

cover.

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery

manufacturer’s directions.)

Remote control basics

• Press POWER to turn the DVD/VCR on or off.

• Make sure VCR/DVD switch is set to VCR/DVD.

• Tap CH or CH to move through the channels one channel at a time.

• The CH

and SET +/– are also used to navigate on-screen menu system.

• You can directly access specific channels using Number keys pad.

• Each press of VCR/DVD on the remote control, switches the screen between the VCR screen (VCR mode)

and the DVD screen (DVD mode).

Operation

• Aim the remote control at the remote sensor and press control buttons

to operate.

• Operate the remote control within 30° angle on either side of the remote

sensor, up to a distance of Approx. 5 meters.

Approx. 5 meters

2A77001AE(06-11)

8/29/02, 10:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic connections

If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber,skip

ahead to page 14 for the proper connections.

ANTENNA TO DVD/VCR CONNECTION

The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV

and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting

an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection

diagram.

Combination VHF/UHF Antenna with 75 ohm Coaxial Cable

DVD/VCR

(ANT.)

75 ohm Coaxial Cable

OUT

(TV)

Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire

DVD/VCR

Matching Transformer

300 ohm Input

(ANT.)

75 ohm output

(not supplied)

OUT

(TV)

300 ohm Twin Lead (Flat) Wire

DVD/VCR

Separate VHF and UHF Antennas

Combiner

75/300 ohm Inputs

75 ohm output

(not supplied)

UHF

VHF

(ANT.)

300 ohm Twin Lead (Flat) Wire

OUT

(TV)

75 ohm Coaxial Cable

NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300

ohm inputs and one 75 ohm output.

NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the

antenna to the DVD/VCR properly.

• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of

an outdoor type antenna is required.

• If you are not sure about the connection, please refer to qualified service personnel.

2A77001AE(12-15)

8/29/02, 11:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic connections

DVD/VCR TO TV CONNECTION

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.

Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow

the connection diagram.

This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna

inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.

NOTE: If a VHF or UHF antenna is

used, set the TV/CATV

menu option to the "TV"

mode.

VHF/UHF IN

75 ohm Coaxial Cable (supplied)

TV with single 75 ohm VHF/UHF

antenna input

NOTE: If a VHF or UHF antenna is

Splitter

75 ohm Input

75/300 ohm outputs

(not supplied)

used, set the TV/CATV

menu option to the "TV"

mode.

UHF

VHF

75 ohm Coaxial Cable

(supplied)

TV with 300 ohm UHF and 75 ohm VHF

antenna inputs

NOTE: If a VHF or UHF antenna is

used, set the TV/CATV

menu option to the "TV"

mode.

UHF

Splitter

75 ohm Input

300 ohm outputs

(not supplied)

75 ohm Coaxial Cable

(supplied)

VHF

TV with 300 ohm UHF and 300 ohm VHF

antenna inputs

2A77001AE(12-15)

8/29/02, 11:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CATV (CABLE TV) connections

Many cable companies offer services permitting reception of extra channels including pay or subscription channels.

This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable

company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to

a special channel which is scrambled, you must have a descrambler box for proper reception.

DVD/VCR

(ANT.)

VHF/UHF

Incoming Cable

IN (ANT)

OUT

(TV)

ALLOWS: Recording of nonscrambled channels.

Use of the programmable timer.

Recording of one channel while watching another.

DVD/VCR

Converter/

Descrambler

(ANT.)

VHF/UHF

IN (ANT)

Incoming

Cable

OUT

(TV)

ALLOWS: Recording of channels through the converter box

(scrambled and unscrambled).

NOTE:

Using the programmable timer to record only the

channel selected at the converter box.

To record from converter/descrambler,

DVD/VCR tuner must be tuned to the

converter output channel, usually

channel 3 or 4.

PREVENTS: Recording one channel while watching another.

Using the DVD/VCR tuner to select channels.

DVD/VCR

(ANT.)

VHF/UHF

IN (ANT)

Converter/Descrambler

Incoming Cable

OUT

(TV)

NOTE:

ALLOWS: Recording of nonscrambled channels.

If you are playing a tape or using the

Use of the programmable timer.

Recording an unscrambled channel while watching

any channel selected at the converter box.

tuner built into the DVD/VCR, the

converter must be set to the video

channel output of the DVD/VCR (either

3 or 4).

PREVENTS: Recording scrambled channels.

NOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR

to the output of the Converter/Descrambler box, usually channel 3 or 4.

2A77001AE(12-15)

8/29/02, 11:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CATV (CABLE TV) connections

IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.

This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled

programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult

your local cable company for more information concerning connection to their descrambler equipment. There are many

ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.

DVD/VCR

Splitter

A/B Switch

VHF/UHF

IN (ANT)

(ANT.)

Incoming

Cable

OUT

(TV)

Converter/Descrambler

ALLOWS: Recording of one channel while watching another.

Using the programmable timer to record only the channel selected at the converter box.

Recording of all channels through the converter box.

PREVENTS: Watching scrambled channels while recording another channel.

Using the DVD/VCR tuner to select channels.

DVD/VCR

Splitter

(ANT.)

VHF/UHF

IN (ANT)

Converter/

Descrambler

A/B Switch

Incoming

Cable

OUT

(TV)

ALLOWS: Recording of nonscrambled channels.

Recording of one channel while watching another.

Watching premium channels through the converter while recording nonscrambled channels.

Using the programmable timer.

PREVENTS: Recording scrambled channels.

DVD/VCR

Converter/

Descrambler

Splitter

(ANT.)

VHF/UHF

IN (ANT)

Incoming

Cable

OUT

(TV)

Converter/

Descrambler

A/B Switch

ALLOWS: Recording of all channels through the converter box.

Recording a scrambled or unscrambled channel while watching another (scrambled or

unscrambled) channel.

Using the programmable timer to record only the channel selected at the converter box.

PREVENTS: Using the DVD/VCR tuner to select channels.

2A77001AE(12-15)

8/29/02, 11:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback connection

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent

on the model and features of each component. Check the Owner's Manual provided with each component for the

location of video and audio inputs and outputs.

Connect to a TV with Audio/Video Output

Use the supplied AUDIO/VIDEO Cord.

Video Output

Audio (L) Output

DVD/VCR

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

PB/CB

AUDIO

OUT

(

)

PR/CR

CH.

To Video

Input

To Audio (R) Input

To Audio (L) Input

Audio (R) Output

AUDIO/VIDEO Cord (supplied)

Connect to a BS TUNER

VHF/UHF

Antenna

Satellite

Antenna

75 ohm Coaxial Cable (not supplied)

To ANT. Input

DVD/VCR

ANT. Input

BS Tuner

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

B/CB

R/CR

AUDIO

OUT

(

)

CH.

ANT.

Output

Video Output

Audio (L) Output

Audio (R) Output

ANT. output

75 ohm Coaxial

Cable (supplied)

To ANT.

Input

AUDIO/VIDEO Cord (supplied)

Connect to a TV with S-Video Output

S-Video Cord (not supplied)

DVD/VCR

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

B/CB

R/CR

AUDIO

OUT

(

)

CH.

To S-Video Input

To Audio (R) Input

To Audio (L) Input

S-Video Output

Audio (L) Output

Audio (R) Output

AUDIO Cord (not supplied)

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback connection

Connect to a Stereo Amplifier with Audio Output

If your TV has a COMPONENT VIDEO IN jack, you can connect the DVD/VCR to the TV with a COMPONENT

cable (not supplied) as shown below. COMPONENT VIDEO output jack can send higher quality video signal to a

TV than S-Video output.

COMPONENT VIDEO Cord (not supplied)

To Component

Component

Video Input

Video Output

AUDIO/VIDEO Cord (supplied)

To Audio/Video Input

To Audio/Video Output

DVD/VCR

Stereo Amplifier

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

B/CB

AUDIO

OUT

(

)

R/CR

CH.

Audio (L) Output

Audio (R) Output

To Audio (L) Input

To Audio (R) Input

AUDIO Cord (not supplied)

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems

such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.

Use this connection to connect an:

• AV amplifier with built-in *Dolby Digital decoder

• AV amplifier with built-in *DTS decoder

Video cord (not supplied)

To Video

DVD/VCR

Input

Video Output

DVD OUTPUT

DIGITAL AUDIO

AUDIO

S-VIDEO

COMPONENT

OPTICAL

COAXIAL

VIDEO

(

)

ANT.

PB/CB

AUDIO

OUT

(

)

PR/CR

CH.

NOTE:

AV Amplifier with

built-in various

decoder as above

You may connect to a TV with a

Component video cable(not supplied) or

S-Video cable(not supplied) instead of

a video cable(not supplied).

Coaxial digital

Audio Output

Coaxial digital cable

(not supplied)

Connecting the optical digital cable

You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital

cable.

When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.

When not using the optical digital cable, attach the dust protection cap to protect against dust.

NOTES:

•

The OPTICAL, COAXIAL, DVD AUDIO L/R, S-VIDEO and COMPONENT jacks are useful only for DVD section.

On these connections, VCR functions can not be used and also the VCR MENUs don’t appear.

VHS signal is output only from the composite jack (DVD/VCR VIDEO/AUDIO OUTPUT) and UHF/VHF OUT.

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the

speakers to be damaged.

Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input

connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may

cause such a high level of noise that it may be harmful to your ears and damage your speakers.

DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is

necessary.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the video channel / Setting the language

When a TV is connected with the 75 ohm coaxial cable only.

Setting the video channel

To view playback of a recorded tape

Press POWER to turn on the DVD/VCR.

or DVD disk, or to watch a program

selected by the VCR's channel

selector, the TV must be set to

channel 3 or 4 (video channel).

Press VCR/DVD to select the VCR mode. The VCR indicator

on the front panel will light.

Set the 3/4 Channel selector switch on the rear panel to CH

3 _{3 or 4.}

OPEN/

POWER

EJECT

VCR/DVD

Turn ON the TV and set to CH 3 or 4 to correspond with the

DISPLAY/CALL

4 _{channel selected in step 3.}

INPUT SELECT

Press TV/VCR to select the VCR position.

5 _{The VCR indicator will appear in the display.}

Select any channel to receive a TV station in your area.

The channel number will appear on the screen for about

4 seconds.

For a push-button TV tuner

TRACKING/

SET

—

TRACKING/

SET

If CH 3 or 4 corresponding to the video channel cannot be tuned

on your TV, proceed as follows: set the VCR 3/4 channel selector

and the TV to CH 3 or 4, play back a prerecorded tape and tune

the TV to receive a sharp color picture from the video cassette

recorder. Refer to your TV owner's manual for details.

SELECT/

ENTER

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

Setting the language

You can choose from three different languages (English,

French and Spanish) for the on-screen displays.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press VCR MENU,

If you use the unit for the first time

and press VCR MENU, instead of

the main menu screen on the right

the “SYSTEM SET UP” menu

screen in step 2 may appear.

TIMER REC SET

AUTO REPEAT

SAP

CH SET UP

SYSTEM SET UP

ON OFF

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

⟨+/-/ENTER/MENU⟩

SLOW

PAUSE/STILL

Press

to select the

“LANGUAGE” option, then press

ENTER.

NOTES:

• If the unit does not operate

properly, or if it does not respond

to commands via the unit and/or

the remote control: Static electric-

ity, etc., may affect the player's opera-

tion. Disconnect the AC power cord

once, then connect it again.

• Both the VCR and the DVD have their

own menu option (See page 36).

• If no buttons are pressed for more

than 60 seconds, the MENU screen

will return to normal TV-operation

automatically.

Press

toselectthedesired

language: English (ENGLISH),

Spanish (ESPAÑOL) or French

(FRANCAIS), then press ENTER.

Press VCR MENU until the MENU screen is cleared.

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto clock setting

The Auto Clock feature enables automatic clock setting and updating, and also automates Time Zone

and Daylight Saving Time settings by receiving XDS (Extended Data Service) information carried on the

channel signal.

Preparation:

You must set the antenna connection before the AC cord plug is

inserted into the AC outlet.

Auto clock setting

After you set the antenna connection and plug the AC cord into an AC

outlet (in that order), you must WAIT 30 MINUTES before turning the

power switch to the on position to prevent interference with the Auto

Clock activation function.

After the clock is set automatically, you may have to set the Time

Zone and Daylight Saving Time.

Press POWER to turn on the DVD/VCR after the Auto Clock operation

is completed.

•

When shipped from factory, the AUTO CLOCK option is set to ON position.

If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.

With cable box connection, if the Auto Clock Setting is unsuccessful,

please select the PBS channel carrying the XDS information, then

turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and if

the clock is not set automatically, set the clock manually. (See page 21)

Time Zone setting (STANDARD TIME)

In the rare event that you live within broadcast range of two stations

in two different time zones, the DVD/VCR may recognize the

wrong station for the AUTO CLOCK set. To correct the situation:

Preparation:

Turn ON the TV.

•

When a TV is connected with an audio/video cable, select the video

input mode on the TV.

• When a TV is connected only with an antenna cable, set to the

video channel 3 or 4. Then select VCR position with TV/VCR.

• Press VCR/DVD to select the VCR mode. (The VCR indicator will

light.)

Press VCR MENU. The VCR menu screen will appear.

Press

to select the SYSTEM SET UP menu, then

press ENTER.

Press or

“STANDARD TIME” option, then

press ENTER.

to select the

Press

to select your Time

Zone, then press the ENTER.

NOTE:

• After performing the Auto Clock

setting, in some cases the clock may

display an incorrect time zone. You can

correct the clock by selecting your

Time Zone setting per the instructions

above.

• When the clock is not set or you set

the clock manually, Time Zone setting

is not available.

Press VCR MENU until the MENU screen is cleared.

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto clock setting

Daylight saving time setting

You can set the Daylight saving

Preparation:

• Turn ON the TV.

• When a TV is connected with an audio/video cable, select the

video input mode on the TV.

time automatically or manually.

• When a TV is connected only with an antenna cable, set to the

video channel 3 or 4. Then select VCR position with TV/VCR.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

Repeat the step 1 on page 19 and

press

to select DAYLIGHT

SAVINGTIME,thenpress ENTER.

Press

to select one of

the options, then press ENTER.

for manual setting

(forward one hour)

for manual setting

(back one hour)

for automatic setting

(read XDS in the signal)

ON:

OFF:

AUTO:

When you want to set the Daylight Saving Time manually, on

the first Sunday in April you set to “ON”, and on the last

Sunday in October you set to “OFF”.

NOTES:

When shipped from factory, the DAYLIGHT SAVING TIME

option is set to “AUTO” position.

•

• When the clock is not set, Daylight Saving Time setting is not

available.

•

When there is no Daylight Saving Time in your area, always

select “OFF” position in step 2.

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual clock setting

You must set the date and time for

timer recordings.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

EXAMPLE: Setting the clock to "8:30 AM" March, 23 (SAT), 2002.

Press VCR MENU. The VCR menu screen will appear.

Press

to select the

TIMER REC SET

AUTO REPEAT

SAP

CH SET UP

SYSTEM SET UP

“SYSTEM SET UP” menu, then

press ENTER.

ON OFF

⟨+/

-/ENTER/MENU⟩

Press

to select the

“CLOCK SET” option, then press

ENTER.

Press

then press ENTER.

to set the month,

MONTH

DAY

1 (WED)

2000

12 : 00AM

YEAR

TIME

⟨+/-/ENTER/CANCEL/MENU⟩

To make corrections any time during the process

Press CANCEL repeatedly until the item you want to change

blinks, then press

Set the day, year and time as in

step 4.

MONTH

DAY

23 (SAT)

2002

YEAR

TIME

8 : 30AM

⟨+/-/ENTER/CANCEL/MENU⟩

NOTE:

After a power failure or disconnection

of the power, the timer settings will be

lost. In this case, reset the present time.

After setting the clock, date and

time starts functioning

automatically.

8 : 30AM SAT

2A77001AE(16-21)

8/29/02, 11:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to

the next channel set into memory, skipping over unwanted channels. Before selecting channels, they

must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/

VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV

menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

OPEN/

POWER

EJECT

VCR/DVD

will light.)

DISPLAY/CALL

INPUT SELECT

TV/CATV selection

Press VCR MENU. The VCR menu screen will appear. Press

to select “CH SET UP”, then press ENTER.

Press

CATV” option.

or to select the “TV/

CH SET UP

TV CATV

AUTO CH MEMORY

ADD/DELETE

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

⟨+/—/ENTER/MENU⟩

SET UP/

CLEAR/

DVD MENU

RETURN

Then press ENTER to select the

TV or CATV mode. The arrow

indicates the selected mode.

VCR MENU

CANCEL

CH SET UP

TV CATV

AUTO CH MEMORY

ADD/DELETE

ZOOM

TITLE

REPEAT A-B

AUDIO/

MEMORY/

ANGLE/

CLOCK/

- VHF/UHF channels

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

⟨+/—/ENTER/MENU⟩

CATV - CABLE TV channels

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press VCR MENU until the menu screen is cleared.

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Setting channels automatically

SLOW

PAUSE/STILL

The VCR can receive a maximum of 181 channels by

presetting the channels into memory.

Repeat above step 1 and press

CH SET UP

to select “AUTO CH

TV CATV

AUTO CH MEMORY

ADD/DELETE

MEMORY”.

⟨+/-/ENTER/MENU⟩

NOTE:

You can’t select “CH SET UP” if you

set the channel to “L”.

Then press ENTER.

CH 002

The auto tuning will start. The

channel display will count up and

when finished, the screen returns

to normal.

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

To ADD/DELETE channels / Noise elimination

Preparation:

To ADD/DELETE channels

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

You can add the channels you want

or delete the channels you do not

want manually.

Repeat the step 1 on page 22.

OPEN/

CH SET UP

POWER

EJECT

VCR/DVD

Then press

to select the

TV CATV

AUTO CH MEMORY

ADD/DELETE

“ADD/DELETE” option and press

ENTER.

DISPLAY/CALL

INPUT SELECT

⟨+/-/ENTER/MENU⟩

To Add or Delete desired channels

Press Number keys or

ADD

CH 003

to select a channel number

you want to add or delete.

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

To add channels

Press ENTER until “ADD”

appears on the screen to set

to add the unmemorized

channel.

⟨+/-/0-9/ENTER/MENU⟩

SET UP/

CLEAR/

CANCEL

DVD MENU

RETURN

VCR MENU

To delete channels

ZOOM

TITLE

REPEAT A-B

Press ENTER until “DELETE” appears on the screen to

set to delete the channel from memory. The channel

number will blink.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

Repeat 1 to 2 to add or delete other channel.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press VCR MENU until the menu screen is cleared.

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Noise elimination

SLOW

PAUSE/STILL

When you don't want to receive a weak signal broadcast, the

Blue back screen can be obtained by selecting the NO NOISE

BACKGROUND "ON". When the unit is shipped from the

factory, the NO NOISE BACKGROUND is set to the "ON".

Repeat the steps 1~2 on page 21 and press

“ NO NOISE BACKGROUND” .

to select

Press ENTER to select the “ON”

2 _position.

Press VCR MENU until the menu screen is cleared.

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading and Unloading a cassette tape

Use only video cassette tapes marked

Insertthecassettetapewithitslabeledsidefacingup

and the erase prevention tab positioned at your left.

An inverted cassette tape cannot be inserted.

Push the center of the tape until it is automatically

inserted.

VCR

Erase prevention tab

Automatic power ON

When you insert a cassette tape the VCR power will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

Press EJECT on the unit or the Remote.

Remove the cassette tape.

Automatic tape eject

This VCR will automatically rewind the tape when the tape has ended. When the tape is rewound to its

beginning, the cassette tape will be ejected automatically.

To prevent accidental erasure

To record again

Removetheerasepreventiontabwithascrewdriver.

Cover the hole with a piece of adhesive tape.

Screwdriver

Erase prevention tab

Adhesive tape

Tape speed and maximum recording time

Video cassette tape

Tape Speed

T-160

2-2/3 hours

8 hours

T-120

2 hours

6 hours

T-90

T-60

T-30

SP (Standard Play)

SLP (Super Long Play)

1-1/2 hours

4-1/2 hours

1 hour

3 hours

30 minutes

1-1/2 hours

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette tape playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

Load a prerecorded tape

(When loading a cassette tape

DISPLAY/CALL

without the erase prevention

tab, playback will start auto-

matically).

INPUT SELECT

To start playback

Press PLAY.

Playback will start.

" will appear on the screen

TRACKING/

SET

—

TRACKING/

SET

for about 4 seconds.

SELECT/

ENTER

To stop playback

Press STOP once.

The tape will stop but remain

fully loaded and ready to play.

SET UP/

CLEAR/

DVD MENU

RETURN

VCR MENU

CANCEL

ZOOM

TITLE

REPEAT A-B

" will appear on the screen

for about 4 seconds.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

To rewind the tape or forward it rapidly

Stop the playback or recording with STOP.

REW/SEARCH

PLAY

SEARCH/F.FWD

To rewind the tape:

To forward the tape:

Press F.FWD.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press REW.

SLOW

PAUSE/STILL

To stop the tape-winding, press STOP. To switch to playback

directly (without STOP), press PLAY.

NOTES:

Forward/Reverse picture search mode

• This VCR selects the playback tape

speed SP, LP or SLP automatically.

• The Cassette tape and DVD disc can

be played back simultaneously. If you

press VCR/DVD, the tape playback

and DVD playback alternate with each

other on the screen.

When the tape is being wound, you can switch to picture search

mode (see next page). To do this, press REW or F.FWDand hold

it down. The unit will resume the tape winding as soon as the

button is released.

• When you select the VCR mode during

DVD playback, DVD playback will stop

automatically after approx. 5 minutes.

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Special playback

Repeat playback

Picture Search

Reverse picture search function

The entire video tape will be played until its end. The

tape will then automatically rewind to the beginning and

the playback will be repeated.

Press REW x 1 or x 2 during the playback.

Forward picture search function

Press F.FWD x 1 or x 2 during the playback.

To return to playback: Press PLAY.

Press SETUP MENU. Press

AUTO REPEAT.

to select

SPEED SEARCH TIMES

PICTURE SEARCH SPEED

TAPE SPEED

Then press ENTER to

PRESS ONCE

PRESS TWICE

TIMER REC SET

AUTO REPEAT

SAP

select [ON] or [OFF].

If [ON] is selected, the

playback will be

repeated endlessly.

ON OFF

SP (Standard Play)

LP (Long Play)

3 X

7 X

9 X

5 X

9 X

CH SET UP

SYSTEM SET UP

SLP (Super Long Play)

15 X

⟨+/-/ENTER/MENU⟩

Still Picture

PressPAUSEduringplayback.Toresumenormal

playback: Press PLAY.

Press VCR MENU until the menu screen is

cleared.

if you press CALL, " " will appear on the screen.

Slow Motion

During playback press SLOW.

To return to playback: Press PLAY or SLOW.

To start the playback, press PLAY.

The playback will be repeated endlessly.

Slow tracking and vertical lock adjustment

If noise bars appear in the picture during slow motion,

press the TRACKING + or – to reduce the noise bars.

If the still picture jitters excessively, press TRACKING

+ or – to stabilize the still picture.

To cancel repeat mode:

Follow the above step 1, then press ENTER to select

the OFF position. Press VCR MENU to return to the

TV.

Frame by Frame picture

Press PAUSE during playback.

Press SLOW repeatedly. The picture advances frame

by frame.

To return to playback: Press PLAY or PAUSE.

Adjusting tracking condition

Automatic tracking adjustment

Whenever you insert a tape and start playback,

automatic tracking starts working and continuously

analyzes the signal to enable optimum picture quality

during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises sufficiently

during playback, press TRACKING +/– to eliminate the

noises.

“MANUAL TR.” will appear. Press it briefly for a fine

adjustment, or press and hold for a coarse adjustment.

•

Press ATR to reactivate automatic tracking again.

“AUTO TR.” will appear.

NOTES:

The audio output is muted during SPEED SEARCH,

STILL, FRAME ADVANCE and SLOW MOTION.

•

• During picture search mode there will be noise bars

which are caused by the system.

• The Special Playback will automatically change to

playback after approx. 5 minutes to protect the video

tape against excessive wear.

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

ZERO RETURN function / Video index search system

Preparation:

• Turn ON the TV and set it to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

ZERO RETURN function

This function makes tape-rewinding

stop at the counter 00:00:00 position

automatically.

DISPLAY/CALL

Press CALL.

The counter display shows the tape

running time during playback or

8 : 47AM MON

STEREO SAP

CH 001

INPUT SELECT

recording.

VCR

00 : 04 : 38 SP

Press COUNTER RESET at the desired

tape position. The counter display will be

reset to the "00:00:00" position (e.g. the

8 : 47AM MON

STEREO SAP

CH 001

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

begining of recording).

VCR

00 : 00 : 00 SP

Press STOP when playback or recording is finished.

Press ZERO RETURN.

The tape will be rewinded or fast forwarded and automatically

stop at the ”00:00:00” position.

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

The CLOCK/COUNTER-button

Press CLOCK/COUNTER. The clock and tape

SUB TITLE/

ATR

PLAY MODE/

SPEED

VCR

TIMER REC

TV/VCR

counter alternate with each other in the display.

REW/SEARCH

PLAY

SEARCH/F.FWD

VCR

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

NOTES for Counter Display:

Video index search system

This function enables you to locate the beginning of any

recording made on the VCR.

•

If you rewind the tape beyond

“00:00:00”, a minus sign (“–”) will be

displayed in front of the time.

•

When you load a tape, the counter will

reset to “00:00:00”.

The counter does not function on

nonrecorded (blank) sections of the

tape.Whenyourewind,fastforwardor

play tapes through blank sections, the

counter stops.

Recording an INDEX MARK

The Index Search function automatically

records an INDEX mark on the tape

whenever a recording is initiated.

CH 001

INDEX

NOTES for Video index search system:

Index Search

Press INDEX

mode.

For Succeeding programs: Press INDEX

For Preceding programs: Press INDEX

(Additional press increases the INDEX NO.

up to 9.)

When the INDEX

•

When you record an INDEX mark at

the very beginning of the tape, the

mark may not be found.

During INDEX search, the tape may

stop and begin to play at a slightly

different location.

during stop or play

•

INDEX may not function properly with

old or worn out video tapes.

INDEX marks may not be found if it is

extremely close to the point where the

search began.

In recording, if you stop recording

temporarily, the INDEX mark is not

recorded on the tape.

is pressed, the

is displayed

unit starts searching the INDEX NO.

selected and finds the portion, then playback

starts automatically.

INDEX NO. (up to 9)

•

To stop the Index Search, press STOP.

2A77001AE(22-27)

8/29/02, 11:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a TV program

Recording and viewing the

same TV program

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

Load a cassette tape with the erase

prevention tab intact.

The VCR will automatically turn on.

DISPLAY/CALL

INPUT SELECT

Press SPEED to select the desired tape

2 _{speed SP or SLP.}

The tape counter and SP or SLP will

appear on the screen for about 4

TRACKING/

SET

—

TRACKING/

SET

00 : 00 : 00 SP

seconds.

SELECT/

ENTER

Set the TV/CATV option to the appropriate position (See page

22).

SET UP/

VCR MENU

CLEAR/

CANCEL

- VHF/UHF channels

DVD MENU

RETURN

CATV - CABLE TV channels

ZOOM

TITLE

REPEAT A-B

Press Number keys or CH

to select the channel to be

4 _recorded.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

1-9

Press 0 twice and then 1-9 as required. Example: To

select 2, Press “002”.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

10-12

13-99

Press 0 first and then the remaining 2 digits in order

from left to right.

REW/SEARCH

PLAY

SEARCH/F.FWD

Example: Press 012 for “12”.

Press 2 digits in order.

CH 110

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Example: Press 22 for “22”.

100-125 Press the 3 digits in order.

SLOW

PAUSE/STILL

Example: Press 110 for “110”.

VHF/UHF/CATV CHANNELS

CATV

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) (W)

37-59 (AA) (WW)

60-85 (AAA) (ZZZ)

86-94 (86) (94)

95-99 (A-5) (A-1)

100-125 (100)(125)

01 (5A)

NOTES:

• Iftheerasepreventiontabisremoved,

the tape will eject when REC/OTR is

pressed for recording.

• If you wish to watch the DVD playback

during the normal recording on VCR,

press VCR/DVD to change to DVD

mode and perform the DVD playback

(see page 37).

• You can not record disc material in

DVD, Video CD, Audio CD, etc. onto a

video tape with this DVD/VCR.

Press REC/OTR.

5 _"

CH 110

" will appear on the screen for

about 4 seconds and “REC” will

appear on the display.

INDEX

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a TV program

To stop recording

Press STOP to stop recording.

" will appear on screen for about 4

seconds.

OPEN/

POWER

EJECT

VCR/DVD

To stop recording temporarily

Press PAUSE/STILL to avoid recording

unwanted material. Press again to continue

the recording.

DISPLAY/CALL

INPUT SELECT

" will appear on screen for about 4

seconds.

NOTES:

•

The pause function will be released after 5 minutes to prevent damage

to the tape or the VCR. The VCR will change to the STOP mode.

You can select a recording channel in the recording pause mode.

•

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

Recording one program while watching another

While the VCR is recording, press TV/VCR to select the TV position.

The “VCR” will go off and recording will continue.

Select the TV channel you want to watch by using the TV channel

selector.

SET UP/

CLEAR/

CANCEL

DVD MENU

RETURN

VCR MENU

ZOOM

TITLE

REPEAT A-B

NOTE:

Some CATV hookups do not permit viewing one channel while

recording another. See pages 14,15.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

To Display VCR operation Status

REW/SEARCH

PLAY

SEARCH/F.FWD

Press CALL. The clock, day of the week and more information will be

indicated.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

While watching TV

DAY OF THE WEEK

SLOW

PAUSE/STILL

CLOCK

8 : 47AM MON

STEREO SAP

CH 125

CHANNEL

STEREO AND

SEPARATE AUDIO

PROGRAM (SAP)

00 : 00 : 00 SP

TAPE SPEED

REAL TIME COUNTER

While operating a tape

Auto Rewind feature

This VCR will automatically rewind the

tape when the tape has ended (except

during OTR and TIMER REC). It will

also eject the tape.

OPERATING

MODE

8 : 30AM MON

HI-FI

CH 125

HI-FI STEREO

AUTO REPEAT

TAPE IN

00 : 15 : 12 SP

To cancel the display: Press CALL until all indicators disappear.

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

One-touch Timer Recording (OTR)

The One-touch Timer Recording

feature provides a simple and

convenient way to make a timed

recording.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the VCR mode. (The VCR indicator

will light.)

OPEN/

Example: One-touch Timer Recording for 30 minutes.

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Load a cassette tape with the erase

prevention tab intact.

The VCR will automatically turn on.

INPUT SELECT

Press SPEED to select the desired tape

2 _{speed SP or SLP.}

TRACKING/

SET

—

TRACKING/

SET

The tape counter and SP or SLP will

appear on the screen for about 4

seconds.

SELECT/

ENTER

00 : 00 : 00 SP

Set the TV/CATV option to the appropriate position (See page

22).

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

- VHF/UHF channels

CATV - CABLE TV channels

ZOOM

TITLE

REPEAT A-B

Press Number keys or CH

4 _{select the channel to be recorded.}

AUDIO/

MEMORY/

ANGLE/

CLOCK/

CH 110

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press REC/OTR. Press the button again to stop recording after

30 minutes. Each additional press of REC/OTR will increase

recording time as shown in the chart below, up to a maximum of

5 hours. The OTR and recording time will appear on the screen

for about 4 seconds. And, REC will keep blinking in the display.

SLOW

PAUSE/STILL

Press

once

Press

Recording time

NORMAL REC

0:30

Recording time

3:00

OTR 0 : 30

CH 125

6 times

7 times

8 times

9 times

4:00

twice

5:00

3 times

4 times

5 times

1:00

INDEX

NORMAL REC

1:30

2:00

NOTE:

If you wish to watch the DVD playback

during the OTR, press DVD/VCR to

change to DVD mode and perform the

DVD playback (see page 37).

To cancel OTR

Press STOP or turn off the power.

" will appear on screen for about 4

seconds.

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer recording

Timer recording can be programmed

on-screen with the remote control.

The built-in timer allows automatic

unattended recording of up to 8

programs within 1 month.

Preparation:

Press VCR/DVD to select the VCR mode.

Load a cassette tape with the erase prevention tab intact.

Press the CALL button to verify that the time and date are

correct (see page 29).

•

Example: Program a timer recording for the 26th day, channel 125

(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Press VCR MENU. Select the

“TIMER REC SET” option , then

press ENTER.

TIMER REC SET

AUTO REPEAT

SAP

ON OFF

INPUT SELECT

CH SET UP

SYSTEM SET UP

⟨+/—/ENTER/MENU⟩

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

Press SET + or – to select one of the

DATE

START END

2 _{program line, then press ENTER.}

—

⟨+/—/ENTER/CANCEL/MENU⟩

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

Press SET + or – to select the date,

then press ENTER.

DATE

26(SU)

START END

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

⟨+/—/ENTER/CANCEL/MENU⟩

TIMER REC

TV/VCR

Set the start time, end time, channel

DATE

START END

4 _{and tape speed as in step 3.}

26(SU) 11:00PM 11:30PM125SLP

NOTES:

• Iftheclocksymbol( )blinkswhenthe

timerrecordingended,theTVprogram

has not been completely recorded

becauseofaninsufficienttapesupply.

Press TIMER REC to cancel the timer

program or press EJECT to remove

the cassette tape.

• PressCANCELtomovecursorbackward

for correction.

• To record from external source set the

channel to "L". "L" will appear next to CH

125 (or 69).

⟨+/—/ENTER/CANCEL/MENU⟩

To enter other programs, repeat step

2 through 4.

DATE

START END

26(SU) 11:00PM 11:30PM125SLP

• During timer recording standby mode,

the VCR mode cannot be selected. To

use the VCR, press TIMER REC at

first, then press VCR/DVD to change

to VCR mode. After you use the VCR,

pressTIMERRECagaintoputtheVCR

into timer recording standby mode.

• If you press TIMER REC during timer

recording, the recording operation will

be interrupted. If you press TIMER

RECagainwithintheprogrammedtime,

the recording operation will start again.

• After a power failure or disconnection

of the power plug, all programmed

recording settings and time display

will be lost upon resumption of power.

In this case, reset the clock (see page

21) and reprogram any timer

recordings.

• To return to the normal screen,

press VCR MENU twice.

⟨+/—/ENTER/CANCEL/MENU⟩

Press TIMER REC. The clock symbol( ) will appear on the

6 _{display and the VCR stands by for recording. At the same}

time, VCR mode will change to DVD mode automatically. You

can use DVD even if the VCR is in the Timer recording mode.

If you do not use the DVD, turn the power off.

The timer recording will start at 5 seconds before the time you

predetermined.

NOTES:

• If the clock symbol( ) does not appear on the display in spite

of the pressing of TIMER REC, the cassette may not have been

loaded yet. (see page 24)

• If the cassette is ejected in spite of the pressing of TIMER REC,

the erase prevention tab of the cassette may have been

removed. (see page 24)

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer-recording

Timer recording special case

Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.

MO-SA: Monday to Saturday) Timer recording

Confirmation / Cancellation of the Timer

recording

If the Timer has been activated, press TIMER REC

Follow the procedure of timer recording on the previous

page. At picture 3 press SET + or – repeatedly until the

desired setting appears. Then press ENTER.

to deactivate the Timer. The clock symbol( ) will

disappear. Then press VCR/DVD to change to

VCR mode.

When you press SET – repeatedly, the indicator at

DATE will change as follows, in this case the day is

Friday.

To confirm Timer program:

At picture 1 on the

DATE

START END

26(SU) 11:00PM 11:30PM125SLP

The current day (Friday)

SU-SA (Sunday to Saturday)

previous page select the

“TIMERRECSET”option

and press ENTER.

MO-SA (Monday to Saturday)

MO-FR (Monday to Friday)

WKL-TH (Weekly Thursday)

One month later

minus one day

Then the timer program

list as right will appear on

the screen.

⟨+/—/ENTER/CANCEL/MENU⟩

WKL-WE

(Weekly Wednesday)

To cancel Timer program:

DATE

START END

Press SET + or – to

select the unnecessary

program, then press

CANCEL to cancel the

program.

DATE

START END

WKL-WE

—

⟨+/—/ENTER/CANCEL/MENU⟩

Press VCR MENU repeatedly until the TV-picture

appears.

In case Timer programs-overlap

•

Do not overlap timer programs as portions of the

conflicting programs will be lost. The first recording

timehaspriorityoverthenextrecordingtimeasshown

in the diagram below.

NOTES:

• If there are other timer record programs remaining,

TIMER REC must be pressed to reactivate the timer,

otherwisetheremainingtimerrecordprogramswillbe

ignored.

8 : 00

9 : 00

10 : 00

11 : 00

Program 1

Program 2

Deleted Parts

• You cannot confirm the Timer program during timer

recording operation.

Program 3

Non Recorded Portion Parts

Recording

Control Settings

• You can correct or cancel a programmed setting in

program confirm mode.

Prog.1

Prog.2

Prog.3

NOTES:

•

The daily/weekly recording can be made continu-

ously until the recording is canceled or the tape

reaches the end.

•

During timer recording the automatic rewinding

mechanism does not function.

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Stereo recording and playback / Separate Audio Program (SAP)

Stereo recording and

When a MTS STEREO broadcast is

received, the word STEREO will ap-

pearonthescreenandtheprogramcan

be viewed or recorded in stereo.

The Hi-Fi STEREO recording procedure

is the same as for normal recordings.

playback

The VHS Hi-Fi audio system permits high

fidelity recording of MTS STEREO TV

broadcasts.

STEREO

OPEN/

NOTE:

POWER

EJECT

VCR/DVD

WhenusingaCATVsystem, stereoTVprogramsmaybetransmitted

over a mono cable channel. In this case the word "STEREO" will not

appear and the sound will be in mono.

DISPLAY/CALL

INPUT SELECT

Output selection

When viewing an MTS STEREO TV program, or playing a prerecorded

VHS Hi-Fi STEREO videotape, press AUDIO SELECT to select how

the audio will be heard through the speakers. Normally set to the Hi-Fi

STEREO position, this button can be set to the MONO position if the

stereo broadcast or videotape audio is of poor quality. The "R" and "L"

positions allow the audio from the Right or Left Hi-Fi channel to be heard

over both TV speakers. This button has no effect when viewing a MONO

videotape or TV program. Each time when you press the button, OUTPUT

SELECTION display appears on the screen for several seconds. Refer

to the chart below.

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

OUTPUT

SELECTION SPEAKERS

SOUND HEARD ON BOTH

SET UP/

CLEAR/

STEREO

L CH

R CH

STEREO

DVD MENU

RETURN

VCR MENU

CANCEL

LEFT CHANNEL AUDIO

RIGHT CHANNEL AUDIO

MONO

ZOOM

TITLE

REPEAT A-B

MONO

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Separate Audio Program (SAP)

Your VCR is fitted with a SAP broadcast system which enables

you to switch to a separate audio program when viewing a

selected channel.

This function applies only when the program is broadcast in

multi-languages through the SAP broadcast system.

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Press VCR MENU. Then press

to select "SAP".

Then press ENTER to select [ON].

TIMER REC SET

AUTO REPEAT

SAP

ON OFF

Then press VCR MENU until the

menu screen is cleared.

CH SET UP

SYSTEM SET UP

⟨+/—/ENTER/MENU⟩

NOTES:

Listening to SAP

• When playing back a tape that is not

recorded in Hi-Fi stereo mode, the

audio will automatically be monaural.

• When listening to a VHS Hi-Fi video

tape or MTS broadcast through the

VHF/UHF jack (Audio/Video cord not

connected), the sound will be

monaural.

When the VCR is turned on or a channel selection is made, make

certain the letters "SAP" appears on the screen. This means that the

"Separate Audio Program" broadcasting is available.

STEREO SAP

SAP

2A77001AE(28-33)

8/29/02, 11:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Duplicating a video tape

If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.

Make all connections before turning on the power.

Load a blank cassette tape with the erase preven-

tion tab intact into the recording VCR.

Load a previously recorded tape into the playback

VCR or CAMCORDER.

Press REC/OTR on the recording VCR, then press

PAUSE/STILL.

Press PLAY on the playback VCR or CAMCORDER,

then press PAUSE/STILL.

Press SPEED to select the desired tape speed SP

or SLP.

It is recommended that you set the Speed to the

SP mode on the recording VCR for best results.

Release the recording pause and the playback still

simultaneously to begin the duplicating process.

Press INPUT SELECT to select AUDIO/VIDEO

input position. "L" will appear in

the display.

Connection with Video camera

Connection with second Video recorder

Playback VCR

Playback Camcorder

ToAV Jack

To VIDEO OUT

To AUDIO (R) OUT

To AUDIO (L) OUT

Recording VCR

AUDIO/VIDEO Cord (supplied)

Recording VCR

To AUDIO (R) IN

To AUDIO (L) IN

AUDIO/VIDEO Cord (not supplied)

To VIDEO IN

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN

For duplicating a previously recorded tape from a

camcorder, follow the camcorder manufacturer’s

instructions. A typical camcorder dubbing hookup

is shown above.

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

This unit applies to DVD discs from Region 1 only.

The loaded Disc (DVD, Audio-CD and MP3-CD) will be recognized automatically.

The suitable Disc-formats are: DVD, CD-R and CD-RW.

Some CD-R/RW discs may be incompatible.

Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or Photo CD to prevent accidental erasure of prere-

corded material.

This unit cannot record disc material in DVD, Audio CD etc. onto a video tape.

If you press the REC/OTR during DVD playback, a symbol mark "

seconds.

" will appear on the screen for aprox.4

DVD DISC

TITLE2

Title

TITLE1

CHAPTER 1

When two or more movies are recorded on a disc,

the disc is divided into two or more sections. Each

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

section is called a “TITLE”.

Chapter

The titles can be subdivided into many sections.

Each section is called a “CHAPTER”.

Audio-CD

Track

TRACK

An Audio CD can contain several items.

These are assigned to the tracks.

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing Disc

• Store the disc in the case to avoid risk of scratches, dirt or damage.

• Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

• Do not wipe the disc round.

• Do not use liquid or aerosol cleaners.

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting setup language

The setup language can be selected.

Preparation:

• Turn ON the TV and set to the video input mode.

• When using an amplifier, switch on the amplifier.

Press VCR/DVD to select the

OPEN/

POWER

EJECT

VCR/DVD

DVD mode. (The DVD indicator

will light.)

DISPLAY/CALL

“No Disc” will appear on the

screen.(IfaDVDdischasalready

loaded, the playback will start

automatically.)

INPUT SELECT

Press SET UP in the stop mode.

The SETUP MENU of DVD will

Picture

appear on the screen.

TV Shape 4:3LB

TRACKING/

SET

—

TRACKING/

SET

Then press

“Language”.

to select

SELECT/

ENTER

: Select

: Enter

Press

toselectOn-Screen

SET UP/

CLEAR/

DVD MENU

RETURN

VCR MENU

CANCEL

Language, then press ENTER.

Language

On-Screen Language ENG

Disc Menu Language ENG

ZOOM

TITLE

REPEAT A-B

Audio Language

Subtitle Language

ENG

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select

: Enter

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press

to select desired

REW/SEARCH

PLAY

SEARCH/F.FWD

language: English (English),

French (Français) or Spanish

(Español), then press ENTER.

Language

On-Screen Language ENG English

Dsc Menu Language ENG Fran ais

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Audio Language

Subtitle Language

ENG Espa ol

ENG

SLOW

PAUSE/STILL

: Select

: Enter

NOTE: To make the SETUP screen disappear, press SET UP

(or RETURN).

If the DVD/VCR does not operate

properly: Static electricity, etc., may

affect the player's operation. Disconnect

the AC power cord once, then connect

it again.

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback procedure

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Press OPEN/CLOSE.

The disc tray will open.

INPUT SELECT

Place a disc onto the tray.

Hold the disc, position it with the

printed label side up, align it with

the guides, and place it in its

proper position.

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

Press PLAY or OPEN/CLOSE.

The disc tray closes automati-

cally.

On the screen,

changes to

“

” and then playback will

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

commence.

ZOOM

TITLE

REPEAT A-B

• A menu screen may appear on

the TV screen, if the disc has

a menu feature. In this case,

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

press

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

ENTER to operate a menu

feature.

REW/SEARCH

PLAY

SEARCH/F.FWD

Press STOP to end playback.

• The DVD/VCR memorizes the stopped point, depending on

the disc. “To Return To The Last Scene Viewed, Press Play.

To Disable This Operation, Press STOP Again.” appears on

the screen for approx. 4 seconds. “ ” will continue blinking

in the display until the playback is stopped completely. Press

PLAY to resume playback (from the scene point).

• If you press STOP again (“ ” appears on the screen) or

unload the disc, the DVD/VCR will clear the stopped point.

Then press OPEN/CLOSE.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

The disc tray opens.

Remove the disc and press POWER.

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

• If a non-compatible disc is loaded, "Please Check Disc", "Disc playback unauthorized Consult owners manual

for further information" or "Parental Lock" will appear on the TV screen according to the type of loaded disc. In

this case, check your disc again (See pages 35 and 45).

• Some discs may take a minute or so to start playback.

• A “Prohibition” symbol

may appear at the upper right of the screen. This symbol means either the feature you

tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate

a problem with the DVD/VCR.

When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,

•

" will appear and remain on the screen for approx. 40 seconds and then it will change to "Please Check Disc".

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays

DVDs according to the disc contents the software producers designed, some playback features may not be

available. Also refer to the instructions supplied with the DVDs.

• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid

possible damage to the audio system, the consumer should take proper precautions when the analog stereo

outputs of the DVD/VCR are connected to an amplification system.

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Special playback

Note: There may be a slight delay

between pressing the button and the

function activation.

Fast Forward Playback

Press F.FWD during normal playback.

Each press of F.FWD will increase the speed of the search x2 ( ),

x8 (

), x30 (

) are available)

), x100 (

). (in case of Audio-CD: x4 ( ) and

OPEN/

POWER

EJECT

VCR/DVD

• To resume normal playback, press PLAY.

Review Playback

DISPLAY/CALL

Press REW during normal playback.

Each press of REW will increase the speed of the search x2 ( ), x8

INPUT SELECT

(

), x30 (

) are available)

), x100 (

). (in case of Audio-CD: x4 ( ) and x8

• To resume normal playback, press PLAY.

Still Playback

TRACKING/

SET

—

TRACKING/

SET

Press PAUSE/STILL during normal

playback.

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

To resume normal playback, press

PLAY.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Frame Advance

REW/SEARCH

PLAY

SEARCH/F.FWD

PressPAUSE/STILLduringstillplay-

back.

One frame is advanced each time

you press PAUSE/STILL.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

To resume normal playback, press

PLAY.

Slow-motion Playback

NOTES:

Press SLOW during normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4,

x1/8.

• The unit is capable of holding a still

video image or On screen display image

on your television screen indefinitely. If

you leave the still video image or On

screen display image displayed on your

TV for an extended period of time, you

risk permanent damage to your

television screen. Projection televisions

are very susceptible.

• To resume normal playback, press PLAY.

• To resume the still playback, press PAUSE/STILL.

Locating a chapter or track

Press SKIP (

) Forward or SKIP

• Some titles may not display chapter

numbers.

(

) Reverse during playback to

locate a chapter or track that you

want to watch.

Each time you press the button, a

“C (chapter)” number or “T (track)”

number is skipped.

• When you set “Title Stop” to “Off” (See

page 53), you can access chapter in

another title. If you go back to the

preceding title by pressing the SKIP, the

DVD/VCR locates the first chapter of the

title. When “Title Stop” is set to “On”.

you can access chapters only within the

current title.

When you press SKIP (

), playback starts from the beginning

of the current chapter or track.

When you press SKIP (

) twice, playback starts from the

beginning of the preceding chapter or track.

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Zooming

OPEN/

POWER

EJECT

VCR/DVD

This unit will allow you to zoom in on the frame image. You can

then make selections by switching the position of the frame.

DISPLAY/CALL

INPUT SELECT

Press ZOOM during playback.

1 _{The center part of the image will}

be zoomed in.

As you repeatedly press the

ZOOM

EXIT

ENTER or ZOOM while “ZOOM”

isselected,themagnificationlevel

changes. Variation of the levels

Zoom Off

: Select

: Change

includes image reduction.

• If you select “EXIT” and press

TRACKING/

SET

—

TRACKING/

SET

the ENTER, you can turn off the symbol mark, keeping the

current magnification level.

SELECT/

ENTER

SET UP/

CLEAR/

Press

to view a different part of the frame.

DVD MENU

RETURN

VCR MENU

CANCEL

2 _{You may move the frame from the center position to UP,}

DOWN, LEFT or RIGHT direction.

• Press CLEAR to restore the zoom point to the center of the

picture.

ZOOM

TITLE

REPEAT A-B

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

While “ZOOM” is selected, press ZOOM repeatedly to return to

a 1:1 view.

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

2A77001AE(34-39)

8/29/02, 10:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

REPEAT PLAYBACK

DISPLAY/CALL

Press PLAY MODE repeatedly to select “Chapter Repeat”,

INPUT SELECT

1 _{“Title Repeat” or “ALL Repeat”. (In case of CD, select “Track}

Repeat” or “ ALL Repeat”.)

DVD

Chapter Repeat

Track Repeat

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

During playback repeat playback will start automatically.

During stop mode press PLAY within about 5 seconds after

you press PLAY MODE to start repeat playback.

• To resume normal playback, select Off.

SET UP/

CLEAR/

CANCEL

DVD MENU

RETURN

VCR MENU

ZOOM

TITLE

REPEAT A-B

A-B Repeat Playback

A-B repeat playback allows you to repeat material between two

selected points.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

Press REPEAT A-B during

playback.

The start point is selected.

TIMER REC

TV/VCR

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press REPEAT A-B again.

The end point is selected.

Playback starts at the point that

you selected. Playback stops at

the end point, returns to Point A

automatically, then starts again.

SLOW

PAUSE/STILL

-B

To resume normal playback,

press REPEAT A-B again.

“Repeat Off” appears on the screen.

NOTES:

•

Some discs may not work with the

repeat operation.

In A-B repeat mode, subtitles near

point A or B may not appear.

During the A-B Repeat Playback the

ANGLE feature will not operate.

You may not be able to set A-B Re-

peat, depending on the scenes of the

DVD.

•

A-B repeat does not work with an in-

teractive DVD and MP3-CD.

Random playback can not be com-

bined with Repeat playback.

2A77001AE(40-45)

8/29/02, 11:07 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory playback/Random playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Memory playback

You can arrange the order of titles, chapter or tracks on the disc.

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Press MEMORY.

In stop mode

In play back

T:-- CT:---

INPUT SELECT

T:-- CT:---

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

Press

In stop mode

In play back

select “T” or “CT”.

Use Number keys

to Input the

TRACKING/

SET

—

TRACKING/

SET

T:01 CT:002

T:-- CT:---

SELECT/

ENTER

favorite number.

T:01 CT:002

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

T : Title number

CT : Chapter number or track number

• If you input a large number than the number that is recorded

on the disc, the bar will be skipped.

• The input number into "T" for CD or MP3 is not effective.

SET UP/

VCR MENU

CLEAR/

DVD MENU

RETURN

CANCEL

ZOOM

TITLE

REPEAT A-B

Press or ENTER.

Set the “T” and

“CT” to bar that

you want to enter

as in step 2.

In stop mode

In play back

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

T:01 CT:002

T:02 CT:004

T:-- CT:---

REW/SEARCH

PLAY

SEARCH/F.FWD

T:02 CT:004

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

• When you select another chapter in the same title, you do

not need to select the title number.

• To cancel the programmed selection, press CANCEL.

SLOW

PAUSE/STILL

Press PLAY to start MEMORY playback.

• To resume normal playback, press CANCEL.

Random playback

Press PLAY MODE repeatedly to select “ Chapter Random”

or “Title Random”.(In case of CD, select Track Random)

NOTES:

DVD

•

The memory playback is cancelled

when press STOP during memory

playback.

Chapter Random

Track Random

• Random playback can not be

combined with Repeat playback.

• You can program up to 30 selections

into the memory.

• Depending on the DVD, Chapter

Random operation may not work

during playback.

During playback random playback will start automatically.

During stop mode press PLAY within about 5 seconds after

you press PLAY MODE to start random playback.

• To resume normal playback, select Off.

• You cannot use the random playback

with memory playback.

2A77001AE(40-45)

8/29/02, 11:07 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 Playback

This player can play back the MP3-data

which has been recorded on CD-R or CD-

RW. To produce the MP3-data, you need a

Windows-PCwithCD-ROMdriveandaMP3-

encoding Software (not supplied).

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD

indicator will light.)

The Apple-HFS-System can not be played.

Press OPEN/CLOSE.

The disc tray will open.

Place a disc onto the tray.

MP3 CD Information

Limitations on MP3 CD playback

• MP3 CD is the disc that is standardized by

ISO9660, its file name must include 3-digits

extension letters, “mp3”.

• The directory and file names of the MP3

CD must correspond to the ISO

Press PLAY or OPEN/CLOSE.

The disc tray closes automatically.

On the TV-screen, “ ” and then

reading file number will appear.

Reading will take as much

time as the number of file.

standardized files.

• This unit can read 200 files per disc. If

one directory has more than 200 files, it

reads up to 200 files, the remaining files will

be omitted.

Press DISPLAY.

• As for multi-session disc, only the first

session can be played.

MP3

000:23

Then press

to select

MP3

EAM

• If the CD has both audio tracks and MP3

files, only audio tracks are played.

• It may take more than one minute for this

unit to read MP3 files depending on its

structure.

• Music recorded by “Joliet Recording

Specification” can be played back, the file

name is displayed (within 8 letters) on the

screen. Long file names will be condensed.

• The music files recorded by “Hierarchical

File System” (HFS) cannot be played.

and press ENTER.

PCM

: Select

: Enter

Press

to select the desired track, then press

ENTER. Track is selected and play commences.

•

In case the folder includes more than 9 tracks, press

to display next track list.

• To remove track list, press CANCEL.

• Press to select “T” and press Number keys your

desired to input.

Limitations on display

• The maximum number for display is 8

letters. Available letters for display are the

following: capital or small alphabets of A

through Z, numbers of 0 through 9, and _

(under score).

MP3

000:23

1. \ CRYINI

2. \ DANGER

3. \ GITARREN

4. \ LILYWA

5. \ MERCYS

6. \ OBSESS

7. \ PINKPA

8. \ RUNNIN

EAM

PCM

: Select

: Search

• Other characters than those above are

replaced in hyphen.

Press STOP to end playback.

• The unit records the stopped track.

Notes on MP3 files

Press PLAY to resume playback (from the beginning of

track).

• If you press STOP again or unload the disc, the unit will

clear the stopped track.

To play back MP3 CD in the recorded order,

1. Use MP3 software that records data

alphabetically or numerically.

2. Name each file including a two-digit or three-

digit number (e.g. “01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

Press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press POWER.

The disc tray closes automatically and DVD/VCR turns off.

CAUTION:

• Some MP3 CDs can not be played back

depending on the recording conditions.

• The CD-R/RW that has no music data or

non-MP3 files can not be played back.

NOTES:

•

During MP3-Playback, you can not use SEARCH, A-B

Repeat functions.

•

You can use Repeat(Track or All) and Random functions for

MP3 CD Playback.(See page 40 and 41)

2A77001AE(40-45)

8/29/02, 11:07 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing soundtrack language / Changing Subtitles language

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

Changing soundtrack language

You can select the language when you play a multilingual disc.

DISPLAY/CALL

Press AUDIO during playback.

INPUT SELECT

Thecurrentsoundtracklanguage

is displayed.

ENG1

ENG2

FRE1

2CH

5.1CH

2CH

Audio:FRE1

: Select

2CH

: Return

2CH

TRACKING/

SET

—

TRACKING/

SET

Press AUDIO repeatedly until

the desired language is selected.

The on-screen display will disap-

pear after a few seconds.

SELECT/

ENTER

ENG1

ENG2

FRE1

2CH

5.1CH

2CH

• To turn off the soundtrack

setting display,press the

CLEAR or ENTER.

Audio:ENG1

: Select

2CH

: Return

2CH

SET UP/

CLEAR/

CANCEL

DVD MENU

RETURN

VCR MENU

ZOOM

TITLE

REPEAT A-B

Changing Subtitles language

You can select the language when playing back a disc recorded

with multi-lingual subtitles.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press SUB TITLE during

playback.

Off

Then press

to select the

ENG 1

SPA 1

FRE 1

desired language.

NOTES:

• To turn off the subtitle setting

display, press the CLEAR or

ENTER.

• To turn the subtitles off, select

“Off”.

• If the desired language is not heard after

pressing AUDIO several times, the

language is not recorded on the disc.

• Changing soundtrack or subtitle

language is cancelled when you open the

disc tray or turn the power off. The initial

default language or available language

will be heard and seen if the disc is

played back again.

Subtitle:--- Off

: Select

: Return

Press SUB TITLE or

turn Subtitles on or off.

Off

ENG 1

SPA 1

FRE 1

•

Depending on the DVD you may be

unable to turn on, turn off, or change the

subtitles, even if they are recorded on the

disc. While playing the DVD, the subtitle

may change while opening or closing the

disc tray, or while changing the title.

Subtitle:ENG1 On

: Select

: On/Off

: Return

•

During some scenes, the subtitles may not

appear immediately after you select “On”.

• The abbreviation of the language

appears instead of the language name.

Refer to the list of languages and their

abbreviations. (See on page 57.)

2A77001AE(40-45)

8/29/02, 11:07 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing angles / Title selection / DVD menu

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

Changing Angles

POWER

EJECT

VCR/DVD

When playing back a disc recorded with multi-angle facility, you

can change the angle that you are viewing the scene from.

DISPLAY/CALL

Press ANGLE during playback.

INPUT SELECT

The current angle will appear.

Angle :1

: Select

: Return

TRACKING/

SET

—

TRACKING/

SET

Press ANGLE or

selected.

• To turn off the angle number display, press the CLEAR.

• You can change the camera angle directly by pressing the

number keys corresponding to its angle number instead of

repeatedly until the desired angle is

SELECT/

ENTER

using the

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

Title Selection

Two or more titles are recorded on some discs. If the title menu

is recorded on the disc, you can select the desired title.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

Press TITLE during playback.

Title menu appears on the screen.

• Press TITLE again to resume playback at the scene

when you pressed TITLE.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

REW/SEARCH

PLAY

SEARCH/F.FWD

Press

to select the desired title.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press ENTER or PLAY.

The playback of the selected title will start.

SLOW

PAUSE/STILL

DVD Menu

Some DVDs allow you to select the disc contents using the

menu.

When you play back these DVDs, you can select the subtitle

language and sound-track language,etc. using the DVD menu.

Press DVD MENU during playback.

The DVD menu appears on the screen.

NOTE:

• Press DVD MENU again to resume playback at

the scene when you pressed DVD MENU.

Depending on the DVD, you may not

be able to change the angles even if

multi-angles are recorded on the disc,

or you may be unable to select the title,

and a “title menu” may simply be called

a “menu” or “title” in the instructions

supplied with the disc.

Press

to select the desired item.

Press ENTER.

The menu continues to another screen. Repeat steps 2 and 3 to

set the item completely.

2A77001AE(40-45)

8/29/02, 11:07 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental control

Somediscsarespecifiednotsuitable

for children. Such discs can be

prevented from play back with the

unit.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Parental control setting

OPEN/

POWER

EJECT

VCR/DVD

Press SET UP in the stop mode.

Press or to select “Operation”.

B ^C

DISPLAY/CALL

Picture

TV Shape 4:3LB

INPUT SELECT

: Select

: Enter

Press

then press ENTER.

to select “Parental Lock”,

B ^C

Operation

Pause/Still

Auto Off

Off On

Off

Parental Lock

Title Stop

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

: Select

Press

to select Off or On.

B ^C

Operation

Off: The parental lock feature does

not function.

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off

SET UP/

CLEAR/

DVD MENU

RETURN

VCR MENU

CANCEL

After pressing the ENTER, follow

step 4 below.

ZOOM

TITLE

REPEAT A-B

: Select

On: To activate the parental lock fea-

ture or change the setting, press the ENTER button and

follow steps 4-6 below.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press Number keys to input a 4-digits

password then press the ENTER

button.

• If you input a wrong number, press

CANCEL.

B ^C

REW/SEARCH

PLAY

SEARCH/F.FWD

Operation

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Security Code ----

: Select

: Enter

SLOW

PAUSE/STILL

Enter the code of a country/area whose

standards were used to rate the DVD

disc. (See the list on the page 46.)

B ^C

Operation

NOTES:

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

• If each setup (page 45~55) has been

completed, the unit can always be

worked under the same conditions

(especially with DVD discs).

Off Area Code

U S

: Select

: Enter

Each setup will be retained in the

memory if you turn the power off.

• Depending on the discs, the unit can-

not limit playback.

• Some discs may not be encoded with

specific rating level information though

its disc jacket says "adult". For those

discs, the age restriction will not work.

• Do not forget the password. If you forget

the password, contact customer service.

2A77001AE(40-45)

8/29/02, 11:08 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental control (Continued)

Country/Area

NETHERLANDS

NORWAY

PHILIPPINES

RUSSIAN FEDERATION

SINGAPORE

SPAIN

Code

Country/Area

Code

AUSTRALIA

BELGIUM

CANADA

CHINA

CHINA HONG KONG

DENMARK

FINLAND

SWEDEN

SWITZERLAND

TAIWAN

THAILAND

UNITED KINGDOM

UNITED STATES

FRANCE

GERMANY

INDONESIA

ITALY

JAPAN

MALAYSIA

a) Press

b) Press the

to select the first character.

to shift and press

to select the second

character.

c) Press ENTER.

Press

to select the parental lock level, then press ENTER.

Operation

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off Area Code

U S

Level

: Select

: Enter

You cannot play DVD discs rated higher than the level you selected

unless you cancel the parental lock function.

For example, when you select level 7, discs rated higher than level

7 are locked out and cannot be played.

The parental lock level is equivalent to following the USA movie ratings.

Level 7: NC-17

Level 6: R

Level 4: PG 13

Level 3: PG

Level 1: G

17 years old and above

Under17yearsoldParentalguidancesuggested

Parental guidance less than 13 years old

Parental guidance

All ages

The parental lock levels for other countries/areas other than the U.S.

are included for future use. Check the appropriate parental lock level

when you buy a DVD disc equipped with the parental lock feature in

the future.

To make the SETUP screen disappear, press SET UP.

To change the parental lock level

Follow steps 4- 6.

To change your 4-digit security code

1) After selecting “On” or “Off” press STOP four times, then press

ENTER.

The 4-digit security code is cleared.

2) Press Number Keys to create a new 4-digit security code.

3) Press ENTER.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting menu language

You can select the language of the

disc menu messages of DVDs.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Press SET UP in the stop mode.

OPEN/

POWER

EJECT

VCR/DVD

Press

to select

Picture

TV Shape 4:3LB

“Language”.

DISPLAY/CALL

VIDEO OUT SELECT

INPUT SELECT

: Select

: Enter

Press

Menu Language”.

to select “Disc

Language

On-Screen Language ENG

Disc Menu Language ENG

TRACKING/

SET

—

TRACKING/

SET

Audio Language

ENG

Subtitle Language

SELECT/

ENTER

: Select

: Enter

Press ENTER.

Press

desired language, then press

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

to select your

Language

On-Screen Language ENG English

Disc Menu Language ENG French

ZOOM

TITLE

REPEAT A-B

ENTER.

Audio Language

ENG Spanish

ENG Others

Subtitle Language

Code E S

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select

: Enter

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

English, French, Spanish

The selected language is the first-priority Menu language.

REW/SEARCH

PLAY

SEARCH/F.FWD

Others: Other languages can be selected (See the Table of

languages on page 57).

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

To make the SETUP screen disappear, press SET UP.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting subtitle language

The same subtitle language can

always be selected even if you replace

the disc or turn the power off.

Preparation:

Turn ON the TV and set to the video input mode.

Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

•

Press SET UP in the stop mode.

OPEN/

POWER

EJECT

VCR/DVD

Press

to select

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

“Language”.

DISPLAY/CALL

INPUT SELECT

: Select

: Enter

Press

to select “Subtitle

Language”.

Language

On-Screen Language ENG

Disc Menu Language ENG

TRACKING/

SET

—

TRACKING/

SET

Audio Language

ENG

Subtitle Language

SELECT/

ENTER

: Select

: Enter

SET UP/

CLEAR/

Press ENTER.

DVD MENU

RETURN

VCR MENU

CANCEL

Press

to select your

Language

On-Screen Language ENG English

Disc Menu Language ENG French

ZOOM

TITLE

REPEAT A-B

desired language, then press

Audio Language

Subtitle Language

ENG Spanish

ENG No Subtitle

Others

ENTER.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

Code E S

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select

: Enter

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

English, French, Spanish

The subtitle is displayed with the selected language if it is

recorded on the disc.

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Others: If you want to select another language, enter the

language code (See the Table of languages on page 57).

SLOW

PAUSE/STILL

No Subtitle:

Subtitles do not appear.

To make the SETUP screen disappear, press SET UP.

NOTES:

• If the selected language is not recorded

on the disc, the first-priority language is

selected.

• Some DVD discs may be set to display

Subtitles in a different language than

you selected. A prior subtitle language

may be programmed on the disc.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting audio soundtrack language

Thesameaudiosoundtracklanguage

can always be selected by your unit

even if you replace the disc or turn

the power off.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Press SET UP in the stop mode.

Press

to select

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

“Language”.

OPEN/

POWER

EJECT

VCR/DVD

: Select

: Enter

DISPLAY/CALL

INPUT SELECT

Press

Language”.

to select “Audio

Language

On-Screen Language ENG

Disc Menu Language ENG

Audio Language

Subtitle Language

ENG

: Select

: Enter

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

Press ENTER.

Press

desired Audio Language, then

press ENTER.

to select your

Language

On-Screen Language ENG English

Disc Menu Language ENG French

SET UP/

CLEAR/

CANCEL

Audio Language

Subtitle Language

ENG Spanish

ENG Others

DVD MENU

RETURN

VCR MENU

Code E S

ZOOM

TITLE

REPEAT A-B

: Select

: Enter

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

English, French, Spanish

The language you have selected will play if it is recorded on

the disc.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Others: If you want to select another language, enter the

REW/SEARCH

PLAY

SEARCH/F.FWD

language code (See the Table of languages on page 57).

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

To make the SETUP screen disappear, press SET UP.

NOTES:

• If the selected language is not re-

corded on the disc, the original

language will be heard.

• Some DVD discs may be played in a

different language than you selected.

Aprior language may be programmed

on the disc.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the aspect ratio of TV screen

You can select the aspect ratio for

Preparation:

your TV.

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

Press SET UP in the stop mode.

Press

to select

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

DISPLAY/CALL

“Picture”.

INPUT SELECT

: Select

: Enter

Press ENTER.

Press

to select your

desired screen type, then press

TRACKING/

SET

—

TRACKING/

SET

Picture

TV Shape 4:3LB

4:3 Letterbox

4:3 Normal

16:9 Widescreen

ENTER.

SELECT/

ENTER

: Select

: Enter

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

You have the following screen sizes to choose from:

4:3 Letterbox:

ZOOM

TITLE

REPEAT A-B

Select when a standard 4:3 TV is connected.

Displays theatrical images with masking bars above and below

the picture.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

4:3 Normal:

TIMER REC

TV/VCR

Select when a standard 4:3 TV is connected.

Displays pictures cropped to fill your TV screen. Either or both

sides of the picture are cut off.

16:9 Widescreen:

Select this mode when connecting to a wide-screen TV.

A wide screen picture is displayed full size.

NOTES:

• The displayable picture size is preset on

the DVD video disc. Therefore, the

playback picture of some DVD video

discs may not conform to the picture size

you select.

To make the SETUP screen disappear, press SET UP.

• When you play DVD video discs

recorded in the 4:3 picture size only, the

playback picture always appears in the

4:3 picture size regardless of the TV

shape setting.

• If you select “16:9 widescreen” and you

own a 4:3 TV set, the DVD playback

picture will be horizontally distorted

during playback. Images will appear to

be horizontally compressed. Always be

sure that your TV shape conforms to the

actual TV in use.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting on Screen display

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

OPEN/

POWER

EJECT

VCR/DVD

Press SET UP in the stop mode.

Press

to select “Display”

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

DISPLAY/CALL

INPUT SELECT

: Select

: Enter

Press

to select “On-

2 _{Screen Display”.}

Display

On-Screen Display On

Background

Screen Saver

TRACKING/

SET

—

TRACKING/

SET

Picture

SELECT/

ENTER

: Select

SET UP/

CLEAR/

Press ENTER.

Press

“Off”, then press ENTER.

DVD MENU

RETURN

VCR MENU

CANCEL

to select “On” or

Display

On-Screen Display Off

Background

Screen Saver

ZOOM

TITLE

REPEAT A-B

Off

Picture On

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

On: Operational modes (e.g. “ ”, “

press the buttons (factory setting).

Off: Operational modes (e.g. “ ”, “

you press any buttons.

”) appear when you

”) do not appear when

REW/SEARCH

PLAY

SEARCH/F.FWD

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

To make the SETUP screen disappear, press SET UP.

2A77001AE(46-51)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Audio

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Audio Out Select

Select the output sound format corresponding to your system

connection.

OPEN/

POWER

EJECT

VCR/DVD

For details of sound recording systems, see on page 55.

DISPLAY/CALL

Press SET UP in the stop mode.

Press

to select “Audio”.

Audio

INPUT SELECT

Audio Out Select

Bitstream

Analog 2ch

PCM

Dynamic Range Control On

Karaoke Vocal

Press

to select “Audio Out

2 _{Select”, then press ENTER. Press}

to select your desired output sound,

: Select

: Enter

then press ENTER.

Bitstream:

Select when connected to an amplifier equipped with a Dolby

Digital, DTS, MPEG1 or MPEG2 decoder. The DVD/VCR outputs

digital audio information in the bitstream format when you play a

DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or

MPEG2 recording system.

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

Analog 2ch: SelectwhenconnectedtoaTV, DolbyProLogicorstereosystem

via the analog audio jacks.

PCM:

Select when connected to a 2 channel digital stereo amplifier.

The DVD/VCR outputs sounds in the PCM 2ch format when you

play a DVD video disc recorded on the Dolby Digital. MPEG1 or

MPEG2 recording system.

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

ZOOM

TITLE

REPEAT A-B

To make the SETUP screen disappear, press SET UP.

Dynamic Range Control

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

Turn on or off a function that makes faint sounds easier to hear

even if you lower the volume during late hours playback.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Press SET UP in the stop mode.

Press

to select “Audio”.

REW/SEARCH

PLAY

SEARCH/F.FWD

Audio

Audio Out Select

Dynamic Range Control On

Bitstream

Off

Karaoke Vocal

Off

Press

to select “Dynamic

2 _{Range Control”, then press ENTER.}

Press

to select “On” or “Off”,

: Select

: Enter

then press ENTER.

NOTES:

Off: Fulldynamicrangeismaintained.

On: Dynamic range is reduced.

• The Dynamic Range Control function

works only during playback of Dolby

Digital recorded discs.

• The level of Dynamic Range Control

may differ depending on the DVD video

disc.

• The vocal output feature is used during

playback of Dolby Digital (multi-channel)

recorded DVD KARAOKE discs. This

feature allows you to turn off vocal audio

tracks, or restore them for background

accompaniment.

• When playing KARAOKE, connect the

appropriate audio equipment such as an

amplifier to the DVD player.

To make the SETUP screen disappear,

press SET UP.

Karaoke Vocal

Turn on or off the vocal output during DVD KARAOKE disc playback.

Press SET UP in the stop mode.

Press

to select “Audio”.

Audio

Audio Out Select

Dynamic Range Control On

Karaoke Vocal

Bitstream

Off

Press

to select “Karaoke

Vocal”, then press ENTER.

Press or to select “On” or “Off”,

then press ENTER.

: Select

: Enter

Off: The primary vocal is not output.

On: Theprimaryvocalisoutputwhen

it is recorded on the disc.

To make the SETUP screen disappear,

press SET UP.

2A77001AE(52-57)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Operation

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Pause/Still

Select the resolution of still pictures.

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Press SET UP in the stop mode.

Press

to select

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

INPUT SELECT

“Operation”.

: Select

: Enter

Press

to select “Pause/

TRACKING/

SET

—

TRACKING/

SET

Still”, then press ENTER. Press

or to select “Auto” or

“Frame”, then press ENTER.

Operation

Pause/Still

Parental Lock

Title Stop

Auto

Off

Auto

Frame

SELECT/

ENTER

: Select

: Enter

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

Auto: For normal use. Still and fast motion images can be

paused.

ZOOM

TITLE

REPEAT A-B

Frame:The resolution of still pictures is improved, so that you

can make a motionless picture clearer when you pause

it.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

To make the SETUP screen disappear, press SET UP.

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

Title Stop

Turn on or off a feature that automatically stops playback after a

REW/SEARCH

PLAY

SEARCH/F.FWD

title has been viewed.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press SET UP in the stop mode.

Press or toselect“Operation”.

SLOW

PAUSE/STILL

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

: Select

: Enter

Press ENTER, then press

to select “Title Stop”, then

press ENTER.

Operation

Pause/Still

Parental Lock

Title Stop

Auto

Off

Press

to select “On” or

“Off”, then press ENTER.

: Select

: Enter

Off: The DVD/VCR continues

after playback of a title is

completed.

On: The DVD/VCR stops after

playback of a title is com-

pleted.

To make the SETUP screen disappear, press SET UP.

2A77001AE(52-57)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Background/Setting Screen Saver

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Setting Background

Select the background color or background picture.

OPEN/

POWER

EJECT

VCR/DVD

DISPLAY/CALL

Press SET UP in the stop mode.

Press or to select “Display”.

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

INPUT SELECT

: Select

: Enter

Press

“Background”, then press

ENTER. Press or to

to select

TRACKING/

SET

—

TRACKING/

SET

SELECT/

ENTER

select your desired background,

then press ENTER.

Blue:

Gray:

Blue background.

Gray background.

SET UP/

VCR MENU

CLEAR/

CANCEL

DVD MENU

RETURN

Picture: Use the picture which appears when you turn on the

DVD/VCR as a background.

ZOOM

TITLE

REPEAT A-B

Jacket: Use the jacket picture included on some discs as a

background. If it is not included, a gray background will

be substituted.

AUDIO/

MEMORY/

ANGLE/

CLOCK/

AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SUB TITLE/

ATR

PLAY MODE/

SPEED

TIMER REC

TV/VCR

To make the SETUP screen disappear, press SET UP.

REW/SEARCH

PLAY

SEARCH/F.FWD

Setting Screen Saver (DVD only)

To turn the screen saver on or off.

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

Press SET UP in the stop mode.

SLOW

PAUSE/STILL

Press

to select

Picture

TV Shape 4:3LB

VIDEO OUT SELECT

“Display”.

: Select

: Enter

Press

to select “Screen

Saver”, then press ENTER.

Press or to select “On” or

“Off”, then press ENTER.

Display

On-Screen Display On

Background Picture

Off

Screen Saver

Off: The screen saver is disen-

gaged.

On: The screen saver operates

in 10 minutes after you press

PAUSE/STILL.

: Select

: Enter

To make the SETUP screen disappear, press SET UP.

2A77001AE(52-57)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting initial setup/output sound conversion table

You can install the initial system

setting.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR/DVD to select the DVD mode. (The DVD indicator

will light.)

Setting initial setup

OPEN/

POWER

EJECT

VCR/DVD

Press SET UP in the stop mode.

DISPLAY/CALL

Press

to select “Initial

Picture

TV Shape 4:3LB

Setup”.

INPUT SELECT

: Select

: Enter

Press ENTER, then press

to select “On-Screen

Language”, “TV Shape” or

“Audio Out Select”.

TRACKING/

SET

—

TRACKING/

SET

Initial Setup

On-Screen Language ENG

English

Fran ais

Espa ol

TV Shape

4:3LB

Bitstream

SELECT/

ENTER

Audio Out Select

: Select

: Enter

SET UP/

CLEAR/

On-Screen Language:

TV Shape:

Audio Out Select:

See on page 36.

See on page 50.

See on page 52.

DVD MENU

RETURN

VCR MENU

CANCEL

ZOOM

TITLE

REPEAT A-B

To make the SETUP screen disappear, press SET UP.

Output sound conversion table (sampling frequency/quantization bit)

You can select the output sound format corresponding to your system connection (see page 52).

2A77001AE(52-57)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Status display of Disc

You can view information on the operation status and access the settings.

With each press of DISPLAY, the status of the disc will appear on the screen and change as follows.

Symbol mark of the feature

you selected is displayed.

DVD

EAZMOOMEPM

EAM

EPM

0:08:16

-0:21:28

00:30

-03:38

EAM

2CH

PCM

IOOM

OFF

BIT

0:08:16

RATE

9.2Mbps

01:14

EAM

----- CD TEXT -----

Disc Title:

No Text

2CH

IOOM

2CH

IOOM

PCM

Track Title:

No Text

Press

to select the desired symbol mark, then press ENTER.

: Title number (Track number)

: Chapter number

Press

or Number keys to locate a title or

Press

or Number keys to locate a Chapter,

track, then press PLAY.

then press PLAY.

: Elapsed (remaining) time of the current title

Audio setting

See page 43.

Press Number keys to locate a desired Location,

then press PLAY.

: Subtitle setting

See page 43.

: Angle setting

See page 44.

ZOOM

: To zoom a picture

: Audio Out Select setting

See page 39.

BST: Bitstream 2CH:Analog 2ch PCM:PCM

See page 52.

: To stop playback

See page 37.

: Playback starts from the beginning of the

current chapter or track.

See page 38.

: Fast reverse playback

See Page 38.

: To start playback

See page 37.

: Fast forward playback

See page 38.

: To locate succeeding chapters or tracks.

See page 38.

: To begin slow motion playback

See page 38.

: To pause playback

See page 38.

Data transfer rate (Mbit/s)

Amount of picture, sound and subtitle data in the DVD

video disc transferred per second.

: To turn off the display

CD TEXT

The larger the value is, the more data processed, but

this does not necessarily insure better picture quality.

Displays CD text data if included on the audio

CDs. (Some letters may not be displayed

properly depending on the disc.)

2A77001AE(52-57)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of languages

Enter the appropriate code for the initial settings "Audio", "Subtitle" and/or "Menu" (see pages 47-49).

Abbreviation Language Abbreviation Language Abbreviation Language

– – –

No alternate

language

Chinese

Dutch

English

French

German

ltalian

Japanese

Korean

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Portuguese

Quechua

Rhaeto-Romance

Kirundi

Rumanian

Russian

Kinyarwanda

Sanskrit

Sindhi

CHI (ZH)

DUT (NL)

ENG (EN)

FRE (FR)

GER (DE)

ITA (IT)

JPN (JA)

KOR (KO)

MAY (MS)

SPA (ES)

Sango

Malay

Spanish

Afar

Serbo-Croatian

Singhalese

Slovak

Slovenian

Samoan

Shona

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Belorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Greek

Esperanto

Estonian

Basque

Persian

Finnish

Fiji

Faroese

Frisian

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laotian

Lithuanian

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Maltese

Burmese

Nauru

Nepali

Norwegian

Occitan

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tongan

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

(Afan) Oromo

Oriya

Panjabi

Polish

Pashto, Pushto

Irish

Scottish Gaelic

Galician

Xhosa

Yoruba

Zulu

2A77001AE(52-57)

8/29/02, 11:06 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your unit. Consult your local

dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

SYMPTOMS

DVD/VCR

POSSIBLE SOLUTIONS

PAGE

•Make sure the power cord is plugged in.

•Try another AC outlet.

•Power is off, check fuse or circuit breaker.

•Unplug unit, then plug it back in.

–

DVD/VCR does not operate.

•Select the DVD or VCR mode before operating.

18,36

•

Antenna connection is not correct or antenna cable is disconnected.

12~15

• The video channel is not in the correct position or the TV is not

set to the video channel 3 or 4.

• Check the unit is connected correctly.

• The video input selector of the TV is not set to VIDEO. Set to

VIDEO (or equivalent).

12~17

–

No picture.

No sound.

• Channel is set to the external mode.

–

• Check the unit is connected correctly.

• Check the input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

12~17

–

26,38

• Aim at the remote control at the remote sensor.

• Operate within Approx. 5 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

• Check the frequency code is set correctly.

The remote control does not

function.

•Check all CATV connections.

•Station or CATV system problems, try another station.

No CATV reception

14,15

24,28

VCR

•The erase prevention tab of the video cassette is broken off.

•The unit is in the external input mode.

TV recording does not work.

• The time is not set correctly.

• The recording start/end time is not set correctly.

• The TIMER has not been pressed ( is not lit).

Timer recording does not work.

• Tracking adjustment beyond range of automatic tracking circuit.

Try Manual tracking adjustment.

• Video heads are dirty.

Noise bars on screen.

–

• The tape is worn or damaged.

DVD

Display is not shown in your

language.

•Select proper language in the menu options.

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play DVD-ROMs, etc.

Playback doesn’t start.

• Some discs may not do some of the functions.

–

• When you press VCR MENU while watching a DVD with the

connections of the DVD exclusive terminal (S-VIDEO cable or

COMPONENT cable) to a TV, you cannot perform all the DVD

functions. In this case, wait for approx. 60 seconds with no

pressing of any buttons.

Stopping playback, slow-motion

play, repeat play, or memory play,

etc. cannot be performed.

2A77001AE(58-BACK)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Problems and troubleshooting / Video head cleaning

SYMPTOMS

No 4:3 (16:9) picture

No on-screen display

No surround sound

POSSIBLE SOLUTIONS

• The setup does not match your TV.

PAGE

• Select Display On.

• The setup does not match your stereo system.

The unit or remote operation key

is not functioning.

• Turn off the unit and unplug the AC power cord for several

minutes, then replug it.

–

Playback does not start when the

title is selected.

• Check the Parental setup.

Audio soundtrack and/or subtitle

language is not changed when

you play back a DVD.

48,49

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.

• Subtitles are cleared. Press SUB TITLE.

No subtitle

Angle cannot be changed.

appears on the screen.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

–

Video head cleaning

Video head clogging

The video heads are the means by which the DVD/VCR reads

the picture from the tape during playback. In the unlikely event

that the heads become dirty enough to be clogged, no picture

will be played back. This can easily be determined if, during

playback of a known good tape, there is good sound, but no

picture (picture is extremely snowy). If this is the case, have

the DVD/VCR checked by qualified service personnel.

Good Picture

Snowy Picture

NOTES: DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE

•

REAR COVER.

Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.

To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

•

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT

WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS

PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.

FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.

2A77001AE(58-BACK)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

GENERAL

Power supply:

AC 120V 60Hz

Power consumption:

Operation: 20W

Stand by: 3W

Weight:

9.9lbs (4.5 kg)

Dimensions:

Width : 16-15/16 inches (430 mm)

Height: 3-7/8 inches (99 mm)

Depth : 12-3/8 inches (314.5 mm)

Inputs/Outputs:

Video:

In: 1Vp-p/75 ohm

Out: 1Vp-p/75 ohm

Audio:

In: –8dBm/50K ohm

Out: –8dBm/1K ohm

UHF/VHF IN/OUT: 75 ohm coaxial

Antenna:

Hi-Fi Frequency Response: 20Hz to 20,000Hz

Hi-Fi Dynamic Range:

More than 90dB

VCR section

Video Head:

Audio Track:

Tuner:

4 Rotary Heads

Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track

181 Channel Freq. Synthesized

VHF

UHF

2-13

14-69

CATV 14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99 (A-5)-(A-1)

100-125 (100)-(125)

01 (5A)

RF Channel Output:

Channel 3 or 4, Switchable

F.FWD/REW Time at 25˚C (77˚F): Approx. 1minute and 48 seconds (with T-120 Cassette Tape)

DVD section

Signal system:

Applicable disc:

Audio characteristics:

Frequency response:

S/N Ratio:

NTSC

DVD (12cm, 8cm), CD (12cm, 8cm)

DVD: 4Hz - 22KHz

CD: 4Hz - 20KHz

90dB

Harmonic distortion:

Wow and flutter:

Dynamic range:

Output:

0.01%

Below Measurable Level

90dB

Video : (RCA) 1 Vp-p/75ohm

Audio : (RCA) –8 dBm/1Kohm

Digital Audio : 0.5Vp-p/75 ohm

CD : Wavelength: 775 - 805 nm

Maximum output power: 0.5 mW

DVD : Wavelength: 640 - 660 nm

Maximum output power: 1.0 mW

Pickup:

ACCESSORIES:

Remote control x 1

75 ohm Coaxial Cable x 1

AUDIO/VIDEO Cable x 1

2A77001AE(58-BACK)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

2A77001AE(58-BACK)

8/29/02, 11:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

KWC Outdoor Shower 28243280000 User Manual
LevelOne Switch FBR 1406TX User Manual
LG Electronics Cell Phone DM110 User Manual
Lincoln Electric Welding System Welding Inverter and Chopper User Manual
Linear Home Security System DUAL 824 User Manual
Linear Saw PD300Z 2 User Manual
Logitech Video Game Controller F510 User Manual
Magnavox DVD Player BDP170MW8 User Manual
Maxxsonics Portable Speaker NKF116 User Manual
Maytag Washer MHW3000B User Manual