LevelOne
FBR-1406TX
2-PORT BROADBAND ROUTER W/4 LAN Port
User’s Manual
Version: 1.0
1
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Status and Information ............................................................................................ 67
3.2 Internet Connection.................................................................................................. 68
3.3 Device Status ............................................................................................................. 69
3.4 Security Log............................................................................................................... 70
3.5 DHCP Client Log...................................................................................................... 71
Chapter 4 ................................................................................................................... 72
Tool................................................................................................................................... 73
4.1 Configuration Tools.................................................................................................. 73
4.2 Firmware Upgrade ................................................................................................... 74
4.3 Reset........................................................................................................................... 75
Appendix A .................................................................................................................. 76
Appendix B................................................................................................................... 77
Glossary ...................................................................................................................... 78
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on purchasing LEVELONE FBR-1406TX Broadband router. The LEVELONE
FBR-1406TX Broadband Router is an incredibly fast router with 20 Mbps LAN to WAN throughput.
The LEVELONE FBR-1406TX is a cost-effective IP Sharing Router that enables multiple users to
share the Internet through up to two ADSL or cable modems. Simply configure your Internet
connection settings in the LEVELONE FBR-1406TX router and plug your PC to the LEVELONE
FBR-1406TX LAN port and you're ready to share files and access the Internet. The multi-homing
function can combine two WAN lines into one virtual high bandwidth WAN line, and let you get a
better Internet surfing experience. As your network grows, you can connect another hub or switch
to the router’s LAN ports, allowing you to easily expand your network. The LEVELONE FBR-
1406TX provides a total solution for the Small and Medium-sized Business (SMB) and the Small
Office/Home Office (SOHO) markets, giving you an instant network today, and the flexibility to
handle tomorrow's expansion and speed.
Features
•
•
•
•
•
•
•
•
•
High Internet Access throughput (20M)
Multi-homing allows multiple users to share two WAN lines
Load balancing and failover between the WAN lines.
Supports up to 253 users
Internet Access via Cable or xDSL modem
Access Private LAN Servers from the Public Network
Equipped with two WAN ports (10/100M) and four LAN ports (10/100M)
Support DHCP (Server/Client) for easy setup
Support advance features such as: Special Applications, DMZ, Virtual Servers, Access
Control, VPN pass through ,Firewall and QoS bandwidth control.
Allow you to monitor the router’s status such as: DHCP Client Log, Security Log and
Device/Connection Status
•
•
Easy to use Web-based GUI for configuration and management purposes
•
Remote Management allows configuration and upgrades from a remote site (over the
Internet)
Minimum Requirements
•
•
One External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45)
Network Interface Card (NIC) for each Personal Computer (PC)
•
PCs with a Web-Browser (Internet Explorer 4.0 or higher, or Netscape Navigator 4.7 or
higher)
Package Content
•
•
•
•
One LevelOne Broadband router unit
One Quick Installation Guide
One User Manual CD
One Power Adapter
•
Accessories
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Get to know the Broadband Router
Back Panel
The diagram (fig1.0) below shows the broadband router’s back panel. The router’s back panel is
divided into three sections, LAN, WAN and Reset:
Figure 1.0
1) Local Area Network (LAN)
The Broadband router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers,
hubs and switches etc.
2) Wide Area Network (WAN)
The WAN ports are connected to your xDSL or Cable modems and are linked to the Internet.
3) Reset
The Reset button allows you to do one of two things.
1) If problems occur with your router, press the router’s reset button with a pencil tip (for
less than 4 seconds) and the router will re-boot itself, keeping your original
configurations.
2) If problems persist or you experience extreme problems or you forgot your password,
press the reset button for longer than 4 seconds and the router will reset itself to the
factory default settings (warning: your original configurations will be replaced with
the factory default settings)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
On the router’s front panel there are LED lights that inform you of the router’s current status.
Below is an explanation of each LED and its description.
LED
Light Status
Description
PWR
ON
Router’s power supply is on
WAN
(Port 1-2)
Green
Yellow
Off
WAN port 100Mbps is connected
WAN port 10Mbps is connected
No WAN connection
Flashing
WAN port has Activity (ACT), data being sent
LAN
(Port 1-4)
Green
Yellow
Off
LAN port 100Mbps is connected
LAN port 10Mbps is connected
No LAN connection
Flashing
LAN port has Activity (ACT), data being sent
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Diagram
Figure 1.2 below shows a typical setup for a Local Area Network (LAN).
ADSL or
Cable modem
Internet
Figure 1.2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
This is a step-by-step instruction on how to start using the router and get connected to the
Internet.
1) Setup your network as shown in the setup diagram above (fig 1.2).
2) You then need to set your LAN PC clients so that it can obtain an IP address automatically.
All LAN clients require an IP address. Just like an address, it allows LAN clients to find one
another. (If you have already configured your PC to obtain an IP automatically then proceed
to step 3, page 11)
Configure your PC to obtain an IP address automatically
By default the broadband router’s DHCP is on, this means that you can obtain an IP address
automatically once you’ve configured your PC to obtain an IP address automatically. This
section will show you how to configure your PC’s so that it can obtain an IP address
automatically for either Windows 95/98/Me, 2000 or NT operating systems. For other
operating systems (Macintosh, Sun, etc.), follow the manufacturer’s instructions. The
following is a step-by-step illustration on how to configure your PC to obtain an IP address
automatically for 2a) Windows 95/98/Me, 2b) Windows XP, 2c) Windows 2000 and 2d)
Windows NT.
2a) Windows 95/98/Me
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network icon. The Network window will appear.
3: Check your list of Network Components. If TCP/IP is not installed, click the Add button to
install it now. If TCP/IP is installed, go to step 6.
4: In the Network Component Type dialog box, select Protocol and click Add button.
5: In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the
OK button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
6: After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of
Network Components and then click the Properties button.
7: Check each of the tabs and verify the following settings:
•
Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
•
•
•
Gateway: All fields are blank.
DNS Configuration: Select Disable DNS.
WINS Configuration: Select Disable WINS Resolution.
•
IP Address: Select Obtain IP address automatically.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8: Reboot the PC. Your PC will now obtain an IP address automatically from your
Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 12).
2b) Windows XP
1: Click the Start button and select Settings, then click Network Connections. The Network
Connections window will appear.
2: Double-click Local Area Connection icon. The Local Area Connection window will
appear.
3: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on
your list. Select it and click the Properties button.
4: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address
automatically and Obtain DNS server address automatically as shown on the following
screen.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 12).
2c) Windows 2000
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network and Dial-up Connections icon. In the Network and Dial-up
Connection window, double-click Local Area Connection icon. The Local Area
Connection window will appear.
3: In the Local Area Connection window, click the Properties button.
4: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on
your list. Select it and click the Properties button.
5: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address
10
Download from Www.Somanuals.com. All Manuals Search And Download.
automatically and Obtain DNS server address automatically as shown on the following
screen.
6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 12).
2d) Windows NT
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network icon. The Network window will appear. Select the Protocol tab from
the Network window.
3: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not
installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.
4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok
11
Download from Www.Somanuals.com. All Manuals Search And Download.
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
6: Check each of the tabs and verify the following settings:
•
•
•
•
IP Address: Select Obtain an IP address from a DHCP server.
DNS: Let all fields are blank.
WINS: Let all fields are blank.
Routing: Let all fields are blank.
7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 12).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Once you have configured your PCs to obtain an IP address automatically, the router’s
DHCP server will automatically give your LAN clients an IP address. By default the
Broadband Router’s DHCP server is enabled so that you can obtain an IP address
automatically. To see if you have obtained an IP address, see Appendix A.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN. If there is another DHCP on your network, then you’ll need to switch
one of the DHCP servers off. (To disable the Broadband router’s DHCP server see chapter 2
LAN Port)
4) Once your PC has obtained an IP address from your router, enter the default IP address
192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>
5) The website screen below will appear. This website contains the router’s web-based
management screens that allows you to configure your broadband router. Click <LOGIN>
Note: By default there is NO password. For security reasons it is recommended that you
input a password as soon as possible (in General setup/system/password, see chapter 2)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6) The HOME page screen below will appear. The Home Page is divided into four sections,
Quick Setup Wizard, General Setup, Status Information and Tools.
Quick Setup Wizard (Chapter 1)
If you only want to start using the broadband router as an Internet Access device then you
ONLY need to configure the screens in the Quick Setup Wizard section.
General Setup (Chapter 2)
If you want to use more advanced features that the broadband router has to offer, then you’ll
need to configure the Quick Setup Wizard and the General Setup section. Alternatively, you
can just configure the General Setup section, since the General Setup/WAN and the Quick
Setup Wizard contain the same configurations.
Status Information (Chapter 3)
The Status Information section is for you to monitor the router’s current status information
only.
Tools (Chapter 4)
If you want to Reset the router (because of problems) or save your configurations or upgrade
the firmware then the Tools section is the place to do this.
Menu
Description
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup Wizard (Chapter 1)
Select your Internet connection type and then
input the configurations needed to connect to
your Internet Service Provider (ISP).
General Setup (Chapter 2)
This section contains configurations for the
Broadband router’s advance functions such as:
Multi-homing, Address Mapping, Virtual Server,
Access Control, Hacker Attack Prevention, DMZ,
Special applications and other functions to meet
your LAN requirements.
Status Information (Chapter 3)
In this section you can see the Broadband
router's system information, Internet Connection,
Device Status, Security Log and DHCP client
Log information.
Tools (Chapter 4)
This section contains the broadband router’s
Tools - Tools include Configuration tools,
Firmware upgrade and Reset. Configuration
tools allow you to Backup (save), Restore, or
Restore to Factory Default configuration for your
Broadband router. The Firmware upgrade tool
allows you to upgrade your Broadband router's
firmware. The RESET tool allows you to reset
your Broadband router.
Logout
Selecting logout will return you to the LOGIN
page
7) Click on Quick Setup Wizard (see chapter 1) to start configuring settings required by your
ISP so that you can start accessing the Internet. The other sections (General Setup, Status
Information and Tools) do not need to be configured unless you wish to implement/monitor
more advance features/information.
Select the section (Quick Setup Wizard, General Setup, Status Information and Tools) you wish
to configure and proceed to the corresponding chapter. Use the selections on the web
management’s top right hand page (see below) to navigate around the web-based management
User Interface.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Quick Setup
The Quick Setup section is designed to get you using the broadband router as quick as possible.
In the Quick Setup you are required to fill in only the information necessary to access the Internet.
Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below.
Step 1) Time Zone
The Time Zone allows your router to base its time on the settings configured here, this will affect
functions such as Log entries and Firewall settings.
Parameter
Description
Set Time Zone
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Enable Daylight Savings
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Start Daylight Savings Time
Select the period in which you wish to start daylight
Savings Time
End Daylight Savings Time
Select the period in which you wish to end daylight
Savings Time
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Click on NEXT to proceed to the next page (step 2) Broadband Type.
Step 2) Broadband Type
In this section you have to select one of four types of connections that you will be using to
connect your broadband router’s first WAN port to your ISP (see screen below).
Note: Different ISP’s require different methods of connecting to the Internet, please check with
your ISP as to the type of connection it requires.
Menu
Description
1.1 Cable Modem
1.2 Fixed-IP xDSL
1.3 PPPoE
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
1.4 PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2,
1.3 or 1.4). Click on Back to return to the previous screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Cable Modem
Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also
require that you fill in additional information such as Host Name and MAC address (see screen
below).
Note: The Host Name and MAC address section is optional and you can skip this section if your
ISP does not require these settings for you to connect to the Internet.
Parameters
Host Name
Description
If your ISP requires a Host Name, type in the host name
provided by your ISP, otherwise leave it blank if your ISP does
not require a Host Name.
MAC Address
Your ISP may require a particular MAC address in order for you
to connect to the Internet. This MAC address is the PC’s MAC
address that your ISP had originally connected your Internet
connection to. Type in this MAC address in this section or use
the Clone MAC Address button to replace the WAN MAC
address with the MAC address of that PC (you have to be using
that PC for the Clone MAC Address button to work). If necessary,
you can use the Release and Renew buttons to release and
renew the WAN IP address. To find out the PC’s MAC address
see Appendix A. (see Glossary for an explanation on MAC
address)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the Cable Modem connection. You can start using the router now,
if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
1.2 Fixed-IP xDSL
Select Fixed-IP xDSL if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section.
Parameters
IP
Description
This is the IP address that your ISP has given you.
Gateway IP
DNS
This is the ISP’s IP address gateway
This is the ISP’s DNS server IP address
Subnet Mask
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the Fixed-IP x DSL connection. You can start using the router
now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 PPPoE
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter
Description
User Name
Enter the User Name provided by your ISP for the PPPoE
connection
Password
Enter the Password provided by your ISP for the PPPoE
connection
Please retype
Type in the Password again to re-confirm
your password
Service Name
MTU
This is optional. Enter the Service name should your ISP
requires it, otherwise leave it blank.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you to not
wish to set a maximum packet size.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximum Idle Time
Auto-reconnect
You can specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using the
Internet) during this specified period, the router will automatically
disconnect the connection with your ISP. Note: Idle time “0”
means no time out, e.g. no time restriction (always On)
If you check the Auto-reconnect function, then when the WAN
connection is disconnected the router will automatically re-
connect when there is a request by a user to access the Internet
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the PPPoE connection. You can start using the router now, if you
wish to use some of the advance features supported by this router see chapter 2, 3, 4.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter
IP Address
Description
This is the IP address that your ISP has given you to
establish a PPTP connection.
Subnet Mask
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Gateway
User ID
Enter the IP address of the ISP Gateway
Enter the User Name provided by your ISP for the PPTP
connection. Sometimes called a Connection ID
Password
Enter the Password provided by your ISP for the PPTP
connection
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PPTP Gateway
Idle Time
If your LAN has a PPTP gateway, then enter that PPTP gateway
IP address here. If you do not have a PPTP gateway then enter
the ISP’s Gateway IP address above
You can specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using the
Internet) throughout this specified period, then the router will
automatically disconnect the connection with your ISP. Note: Idle
time “0” means no time out, e.g. no time restriction (always On)
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the PPTP connection. You can start using the router now, if you
wish to use some of the advance features supported by this router see chapter 2, 3, 4.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
General Settings
Once you click on the General Setup button at the Home Page, you should see the screen below.
If you have already configured the Quick Setup Wizard you do NOT need to configure anything
thing in the General Setup screen for you to start using the Internet, except that you have multiple
WAN lines and you want to utilize all these WAN lines.
The General Setup contain advanced features that allow you to configure the router to meet your
network’s needs such as: Multi-homing, Address Mapping, Virtual Server, Access Control, Hacker
Attack Prevention, Special Applications, DMZ and other functions.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Below is a general description of what advance functions are available for this broadband router.
Menu
Description
2.1 System
This section allows you to set the Broadband router’s system
Time Zone, Password and Remote Management Administrator.
2.2 WAN
2.3 LAN
2.4 NAT
This section allows you to select the connection method in order
to establish connections with your ISPs
You can specify the LAN segment’s IP address, subnet Mask,
enable/disable DHCP and select an IP range for your LAN
You can configure the Address Mapping, Virtual Server and
Special Applications functions in this section. This allows you to
specify what user/packet can pass your router’s NAT.
2.5 Firewall
2.6 QoS
The Firewall section allows you to configure Access Control,
Hacker Prevention and DMZ.
The QoS section allows you to configure QoS bandwidth control
by your policy.
Select one of the above five General Setup selections and proceed to the manual’s relevant sub-
section
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 System
The system screen allows you to specify a time zone, to change the system password and to
specify a remote management user for the broadband router.
Parameters
Description
System Settings
2.1.1 Time Zone
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
2.1.2 Password Settings
Allows you to select a password in order to access the
web-based management website.
2.1.3 Remote Management
You can specify a Host IP address that can perform
remote management functions.
Select one of the above three system settings selections and proceed to the manual’s relevant
sub-section
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.1 Time Zone
The Time Zone allows your router to reference or base its time on the settings configured here,
which will affect functions such as Log entries and Firewall settings.
Parameter
Description
Set Time Zone
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Enable Daylight Savings
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Start Daylight Savings Time
Select the period in which you wish to start daylight
Savings Time
End Daylight Savings Time
Select the period in which you wish to end daylight
Savings Time
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.2 Password Settings
You can change the password required to log into the broadband router's system web-based
management. By default, there is no password. So please assign a password to the Administrator
as soon as possible, and store it in a safe place. Passwords can contain 0 to 12 alphanumeric
characters, and are case sensitive.
Parameters
Description
Current Password
Enter your current password for the remote management
administrator to login to your Broadband router.
Note: By default there is NO password
New Password
Enter your new password
Re-Enter Password
for Verification
Enter your new password again for verification purposes
Note: If you forget your password, you’ll have to reset the router
to the factory default (No password) with the reset button (see
router’s back panel)
Idle Time Out
Login Connections (login to web-based management) without
any activity that go beyond this specified period (minutes) will
automatically disconnect the web-based management. Note: Idle
time “0” means no time out, e.g. no time restriction
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.3 Remote Management
The remote management function allows you to designate a host in the Internet the ability to
configure the Broadband router from a remote site. Enter the designated host IP Address in the
Host IP Address field.
Parameters
Description
Host Address
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a
remote site. This means if you are at home and your home IP address
has been designated the Remote Management host IP address for this
router (located in your company office), then you are able to configure
this router from your home. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a remote
location, providing they know the password.
Click the Enabled box to enable the Remote Management function.
Note: When you want to access the web-based management from a
remote site, you must enter the router’s WAN IP address (e.g. 10.0.0.1)
into your web-browser followed by port number 8080, e.g. 10.0.0.1:8080
(see below). You’ll also need to know the password set in the Password
Setting screen in order to access the router’s web-based management.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of each WAN port connect you want to establish with your ISP. The WAN
settings offer the following selections for the router’s WAN ports, Dynamic IP, PPPoE, PPTP,
Static IP Address. You have to select one of the two WAN ports first and configure one WAN
port at a time.
Parameters
Description
2.2.1 Dynamic IP address
Your ISP will automatically give you an IP address
2.2.2 PPPoE
2.2.3 PPTP
Your ISP requires PPPoE connection.
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
2.2.4 Static IP address
Your ISP has given you an IP address already
Once you have made a selection, click <More Configuration> at the bottom of the screen and
proceed to the manual’s relevant sub-section
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some
ISP’s may also require that you fill in additional information such as Host Name, Domain Name
and MAC address (see chapter 1 “Cable Modem” for more detail)
2.2.2 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 “PPPoE” for more detail)
2.2.3 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 “PPTP” for more detail)
2.2.4 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section. (See chapter 1 “Fixed IP” for more
detail)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.5 WAN Policy
The WAN policy for multi-homing can be setup here. You can setup policy for each WAN
separately. The router will balance the load between all active WAN ports according to the
Send/Receive rate of the WAN ports. You can setup an IP for the router to detect if the WAN line
is connected. If the router fails to ping the IP, it would recognize the WAN line as not connected,
and will stop directing the Internet traffic to this WAN port. The traffic will be redirected to the
other active WAN port. The Intranet users will not become aware of this change and keep surfing
the Internet smoothly. You also can setup a WAN port as a backup WAN port. Backup WAN port
would not be activated when the router start up. When the other active WAN port fails to connect
to the Internet, the backup WAN port will be activated and take over all the traffic.
Parameters
Speed
Description
The send/upstream and receive/downstream
speed of the WAN line the WAN port is
connected to.
Connectivity check
You can key in an IP. The router will ping that IP
to verify if the WAN line can access the Internet.
You also can select “Ping Default Gateway”, and
the router will check if the WAN line is ok by ping
the default gateway of the WAN port.
Operation
If you select “Enable”, the WAN port will be
activated when the system boot up. If you select
34
Download from Www.Somanuals.com. All Manuals Search And Download.
“Backup”, the WAN port is disabled on start up.
But when other enabled WAN ports fail, the
backup WAN port will be activated and take over
all the traffic.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.6 DNS
A Domain Name System (DNS) server is like an index of IP addresses and Web addresses. If
name in its index and the matching IP address. Most ISPs provide a DNS server for speed and
convenience. If your Service Provider connects you to the Internet with dynamic IP settings, it is
likely that the DNS server IP address is provided automatically. However, if there is a DNS server
that you would rather use, you need to specify the IP address of that DNS server here.
Parameters
Description
Domain Name Server (DNS) Server
This is the ISP’s DNS server IP address that
they gave you; or you can specify your own
preferred DNS server IP address
Secondary DNS Address (optional)
This is optional. You can enter another DNS
server’s IP address as a backup. The secondary
DNS will be used should the above DNS fail.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.7 DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an
account, password and your static domain name from the DDNS service providers. This router
supports DynDNS and TZO.
Parameters
Enable/Disable
Provider
Default
Disable
Description
Enable/Disable the DDNS function of this router
Select a DDNS service provider
Your static domain name that use DDNS
DynDNS
Domain name
Account/E-mail
The account that your DDNS service provider
assigned to you
Password/Key
The password you set for the DDNS service
account above
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 LAN Port
The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports
as well as a subnet mask for your LAN segment.
Parameters
Default
Description
LAN IP
IP address
192.168.2.1
This is the router’s LAN port IP address (Your
LAN clients default gateway IP address)
IP Subnet Mask
DHCP Server
255.255.255.0
Enabled
Specify a Subnet Mask for your LAN segment
You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll
have to manually set your LAN client’s IP
addresses; make sure the LAN client is in the
same subnet as this broadband router if you
want the router to be your LAN client’s default
gateway
Lease Time
The DHCP when enabled will temporarily give
your LAN clients an IP address. In the Lease
Time setting you can specify the time period that
38
Download from Www.Somanuals.com. All Manuals Search And Download.
the DHCP lends an IP address to your LAN
clients. The DHCP will change your LAN client’s
IP address when this time threshold period is
reached
IP Address Pool
You can select a particular IP address range for
your DHCP server to issue IP addresses to your
LAN Clients.
Note: By default the IP range is from: Start IP
192.168.2.100 to End IP 192.168.2.199. If you
want your PC to have a static/fixed IP address
then you’ll have to choose an IP address outside
this IP address Pool
Domain Name
You can specify a Domain Name for your LAN
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 NAT
Network Address Translation (NAT) allows multiple users at your local site to access the Internet
through a single Public IP Address or multiple Public IP Addresses. NAT provides Firewall
protection from hacker attacks and has the flexibility to allow you to map Private IP Addresses to
Public IP Addresses for key services such as Websites and FTP.
Parameter
Description
2.4.1 Address Mapping
The Broadband router allows one or more Public IP
Address(es) to be mapped to a pool of local Private IP
Address(es). This feature is particular useful when you
have multiple global IPs and want to divide local users
into different groups.
2.4.2 Virtual Server
You can have different services (e.g. email, FTP, Web
etc.) going to different service servers/clients in your
LAN. The Virtual Server allows you to re-direct a
particular service port number (from the Internet/WAN
Port) to a particular LAN IP address and its service port
number.
2.4.3 Special Applications
Some applications require multiple connections, such as
Internet games, video conferencing, Internet telephony
and others. In this section you can configure the router
to support these types of applications.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Click on one of the three NAT selections and proceed to the manual’s relevant sub-section
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.1 Address Mapping
The Address Mapping function allows IP addresses used in a private Local Area Network (LAN)
to be mapped (translated) to different Public IP Addresses used in the public/global Internet. This
feature limits the number of Public IP addresses required from the ISP and also maintains the
privacy and security of the Local Area Network. Essentially the Broadband router allows one or
more Public IP Address(es) to be mapped to a pool of local Private IP Address(es). You can set
which WAN ports a virtual IP range can use to access the Internet. The virtual IP range will use
the public IP of the WAN port in using when access Internet.
Parameter
Description
WAN ports
You can assign WAN ports that each virtual IP
range can use to access the Internet. The Public/legal
IP addresses of WAN ports that exist in the Internet that
will be transformed to one or more private/Virtual IP
address (LAN PC clients) e.g. 192.168.2.x. This means
that the private IP addess(es) selected will use the public
IP addresses of designated WAN ports when accessing
the Internet
Note: You need to give your LAN PC clients a
fixed/static IP address for Address Mapping to work
properly.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: Address Mapping
The diagram below demonstrates how Address Mapping works. With the below configuration,
LAN client A will use the global/public IP addresses of WAN1and WAN2. LAN client B will use
global/public IP address of WAN2.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.2 Virtual Server
Use the Virtual Server function when you want different servers/clients in your LAN to handle
different service/Internet application type (e.g. Email, FTP, Web server etc.) from the Internet.
Computers use numbers called port numbers to recognize a particular service/Internet application
type. The Virtual Server allows you to re-direct a particular service port number (from the
Internet/WAN Port) to a particular LAN private IP address and its service port number. (See
Glossary for an explanation on Port number)
Parameters
Private IP
Description
This is the LAN client/host IP address that the Public Port
number packet will be sent to.
Note: You need to give your LAN PC clients a fixed/static IP
address for Virtual Server to work properly.
Private Port
Type
This is the port number (of the above Private IP host) that the
below Public Port number will be changed to when the packet
enters your LAN (to the LAN Server/Client IP)
Select the port number protocol type (TCP or UDP). If you are
unsure, then leave it to the default TCP protocol.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
WAN Port
Public Port
Select through which WAN port you want Internet users
access the server. The server’s mapped public IP would be
the public IP of the selected WAN port.
Enter the service (service/Internet application) port number
from the Internet that will be re-directed to the above Private IP
address host in your LAN
Note: Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual Server and the
DMZ settings.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
Example: Virtual Server
The diagram below demonstrates one of the ways you can use the Virtual Server function. Use
the Virtual Server when you want the web server located in your private LAN to be accessible to
Internet users. The configuration below means that any request coming form the Internet to
access your web server will be translated to your LAN’s web server (192.168.2.2). Note: For the
virtual server to work properly Internet/remote users must know your global IP address. (For
websites you will need to have a fixed/static global/public IP address)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.3 Special Applications
Some applications require multiple connections, such as Internet games, video conferencing,
Internet telephony and others. In this section you can configure the router to support multiple
connections for these types of applications.
Parameters
Description
Trigger Port
This is the out going (Outbound) port number for this particular
application
Note: The range of the Trigger Port is only from 0 to 65535.
Trigger Type
Public Port
Select whether the outbound port protocol is TCP or UDP
Enter the In-coming (Inbound) port or port range for this type of
application (e.g. 2300-2400, 47624)
Note: Individual port numbers are separated by a comma
(e.g. 47624, 5775, 6541 etc.). To input a port range use a “dash”
to separate the two port number range (e.g. 2300-2400)
Public Type
Enabled
Select the Inbound port protocol type: TCP or UDP
You must tick/check the Enabled box to enable this particular
special application configuration
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Only one LAN client can use a particular special
application at a time.
Popular applications
This section lists the more popular applications that require
multiple connections. Select an application from the Popular
Applications selection. Once you have selected an application,
select a location (1-10) in the Copy to selection box and then
click the Copy to button. This will automatically list the Public
Ports required for this popular application in the location (1-10)
you’d specified.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
Example: Special Applications
If you need to run applications that require multiple connections, then specify the port (outbound)
normally associated with that application in the "Trigger Port" field. Then select the protocol type
(TCP or UDP) and enter the public ports associated with the trigger port to open them up for
inbound traffic.
Example:
ID Trigger Port Trigger Type
Public Port
2300-2400, 47624
6112
Public Type
TCP
Comment
MSN Game Zone
Battle.net
1
2
28800
6112
UDP
UDP
UDP
In the example above, when a user trigger’s port 28800 (outbound) for MSN Game Zone then the
router will allow incoming packets for ports 2300-2400 and 47624 to be directed to that user.
Note: Only one LAN client can use a particular special application at a time.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Firewall
The Broadband router provides extensive firewall protection by restricting connection parameters,
thus limiting the risk of hacker attack, and defending against a wide array of common Internet
attacks. However, for applications that require unrestricted access to the Internet, you can
configure a specific client/server as a Demilitarized Zone (DMZ).
Note: To enable the Firewall settings select Enable and click Apply
Parameters
Description
2.5.1 Access Control
Access Control allows you to specify which hosts users can or
cannot have access to certain Internet applications
2.5.2 URL Blocking
URL Blocking allow you to specify which URLs can not be
accessed by users.
2.5.3 Schedule Rule
Schedule Rule lets you assign time ranges for schedules.
2.5.4 Intrusion Detection
The Broadband router's firewall can block common hacker
attacks and can alert you by email if attacks occur
2.5.5 DMZ
The DMZ function allows you to re-direct all packets going to
your WAN port IP address to a particular IP address in your LAN.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Click on one of the firewall selections and proceed to the manual’s relevant sub-section
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.1 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Access Control allows
users to define the traffic type permitted or not permitted in your LAN. You can control which PC
client uses what services and also the time period in which they can have access to these
services.
Parameters
Description
Enable Filtering Function
You must select whether to enable (Yes) or disable (No)
the Access control function that you’ve configured in this
screen
Add PC
You can click Add PC to add an access control rule
for users by IP addresses.
MAC Filtering Table
Enter the MAC addresses of client PCs that you
want to block from accessing the Internet.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Add PC
Parameters
Description
Client PC Description
The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this
Access Control rule. This is the user’s IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users’ last digit (octet) IP address and the last user’s last
octet IP address in the appropriate boxes. If you want to
select only one user then input the user’s last digit IP
address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service
Protocol
You can block the clients from accessing some
Internet services by checking the services you want
to block.
This allows you to select UDP or TCP protocol type
you want to block.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Port Range
You can assign up to five port ranges. The router
will block clients from accessing Internet services
that use these ports.
Scheduling Rule
You can select one of the Scheduling Rule you set
previously and the router will block the clients
during the time in the Scheduling Rule.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: Access Control
In the example below, LAN client B cannot access any websites ever (Websites uses Port 80).
However, LAN client A is unable to access websites (and any other service that uses ports
between 80 and 999) between Saturday 8am to Sunday 8pm.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL
address or just keyword of the Web site. To specify particular PCs, go to the Access
Control page and check the box for “WWW with URL Blocking” in the “Client PC
service” table.
Parameters
Description
URL/Keyword
Enter the full URL address or the keyword of the
Web site you want to block.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.3 Schedule Rule
You can assign time ranges for schedule. The schedule can be used by other functions,
for example Access Control.
Parameters
Edit
Description
Click Edit to modify the time range of the rule
schedule.
Delete
Click Delete to delete the rule of schedule.
Add Schedule Rule
Click Add Schedule Rule to add a new schedule rule and
enter the detail edit page to edit the time range of the
schedule rule.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Schedule Rule
Parameters
Description
Name
The name of the schedule rule.
You can enter comment for the schedule rule.
Comment
Activate Time Period
You can enter the start time and end time of each day in
a week for the schedule rule.
Click <Apply> at the bottom of the screen to save the above configurations and go back to the
previous page of Schedule Rule setting.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.4 Intrusion Detection
The Broadband router's firewall can block common hacker attacks, including Denial of Service,
Ping of Death, and RIP defect. If Internet attacks occur the router can also alert you by email.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Parameters
Description
Intrusion Detection Feature
DoS Protection
Protections from any Denial of Service Attacks
Discard Ping From WAN
The router’s WAN port will not respond to any
Ping requests
RIP defect
Protection from RIP defect
Stateful Packet Inspection
The router will analyze all packets of
selected protocols according to the state of
all sessions and block all abnormal packets.
When hackers attempt to enter your network, we can alert you by e-mail
Email Address
Enter the email address that you would like the
alert warning to be sent to should an attack
occur
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SMTP Server Address
POP3 Server Address
User Name
Enter the IP address of the above email
address’ SMTP server
Enter the IP address of the above email
address’ POP3 server
Enter the User Name of the above POP3 server
Enter the Password of the above POP3 server
Password
Connection Policy
Setup wait and idle timeout of session states. All
timeout sessions will be removed to protect the
router from DoS attacks.
DoS Detect Criteria
Setup the criteria of each kind of abnormal
events. Any abnormal event that happens more
often than the allowed criteria will be treated as
DoS attack and the router will record this event
in the security log and alert the user by e-mail.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.5 DMZ
If you have a local client PC that cannot run an Internet application (e.g. Games) properly from
behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access
by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN
port IP address to a particular IP address in your LAN. The difference between the virtual server
and the DMZ function is that the virtual server re-directs a particular service/Internet application
(e.g. FTP, websites) to a particular LAN client/server, whereas DMZ re-directs all packets
(regardless of services) going to your WAN IP address to a particular LAN client/server.
Parameters
Description
Enable DMZ
Select Yes to enable DMZ
Select No to disable DMZ
Note: If there is a conflict between the Virtual Server and the
DMZ setting, then Virtual Server function will have priority over
the DMZ function.
Public IP Address
The IP address of the WAN port or any other Public IP
addresses given to you by your ISP
Client PC IP Address
Input the IP address of a particular host in your LAN that will
receive all the packets originally going to the WAN port/Public IP
address(es) above
Note: You need to give your LAN PC clients a fixed/static IP
address for DMZ to work properly.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 QoS
The QoS can let you classify packets by source/destination IP, MAC address, port
number and type of service. The packets that match one of the QoS rules can have higher
priority than other packets and will pass through this router first when the WAN link is
congested. This can let you have a better experience in using critical real time services
like Internet phone, video conference …etc.
Parameters
Description
Enable QoS Function
You can select “Yes” to enable the QoS function or
select “No” to disable the QoS function.
Edit
Click Edit to modify the rule of QoS.
Click Delete to delete the rule of Qos.
Click “Add critical class” to add a new QoS rule.
Delete
Add critical class
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
QoS Edit Rule
This page let you to specify the rule to classify packets. All packets that match the rule will have
higher priority to pass through this router. The rule consists of several parts -- Source Address,
Destination Address, Traffic Type, Protocol and DiffServ Type. To match the rule, each packet
has to match all parts of the rule.
Parameters
Description
Rule Name
The name of this rule
Source Address
You can define the source address of packet here. If
you select “MAC address”, you can define up to
five source MAC addresses. If you select IP range,
you can define one source address IP range. You
also can select “WILDCARD” to let any source
address matches this part of the rule.
Destination Address
You can define the destination address of packet
here. If you select “MAC address”, you can define
up to five destination MAC addresses. If you select
IP range, you can define one destination address IP
range. You also can select “WILDCARD” to let any
destination address matches this part of the rule.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Traffic Type
Protocol
You can select one of the traffic types like FTP,
SMTP …etc. You also can select “CUSTOMIZED
SERVICE” to define your own service by protocol,
source port and destination port.
If you select “IP” protocol, the rule will match
packets by IP information, like source address,
destination address …etc. If you select “TCP” or
“UDP”, the rule will not only match packets by IP
information, but also session layer information, like
source port and destination port. You can enter
several ranges for source and destination port to
match.
DiffServ Type
You can select one of the DiffServ type to match or
select “WILDCARD” to match all DiffServ types.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Status
The Status section allows you to monitor the current status of your router. You can use the Status
page to monitor: the connection status of the Broadband router's WAN/LAN interfaces, the
current firmware and hardware version numbers, any illegal attempts to access your network, and
information on all DHCP client PCs currently connected to your network.
Parameters
Description
3.1 Status and Information Shows the router’s system information
3.2 Internet Connection
View the Broadband router’s current Internet connection status
and other related information
3.3 Device Status
3.4 Security Log
View the Broadband router’s current setting status
View any attempts that have been made to illegally gain access
to your network.
3.5 DHCP PC Client Log
View your LAN client's information that is currently linked to the
Broadband router's DHCP server
Select one of the above five Status selections and proceed to the manual’s relevant sub-section
66
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Status and Information
The Status and Information section allows you to view the router’s system information
Parameters
Information
Description
You can see the router’s system information such as the router’s:
LAN MAC Address, WAN MAC Address, Hardware version,
Serial Number, Boot code Version, Runtime code Version
67
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Internet Connection
View the Broadband router’s current Internet connection status and other related information
Parameters
Description
Internet Connection
This page displays whether the WAN port is connected to a
Cable/DSL connection. It also displays the router’s WAN port:
WAN IP address, Subnet Mask, and ISP Gateway as well as
the Primary DNS and Secondary DNS being used.
Note: When the WAN port is a Dynamic IP connection, the
<Release> and <Renew> button will release the Broadband
router’s WAN IP address and renew will get another IP address
from the DHCP server. If the WAN port uses PPPoE, <Release>
will disconnect the PPP session, and <Renew> will initialize
another PPP session.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Device Status
View the Broadband router’s current configuration settings. The Device Status displays the
configuration settings you’ve configured in the Quick Setup Wizard/General Setup section.
Parameters
Description
Device Status
This page shows the Broadband router’s current device settings.
This page displays the Broadband router LAN port’s current LAN
IP Address and Subnet Mask. It also shows whether the DHCP
Server and Firewall functions are enabled/disabled. The firewall
status is shown enabled if the firewall is enabled (regardless of
whether you’ve configured any of the firewall features).
69
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Security Log
View any attempts that have been made to illegally gain access to your network.
Parameters
Description
Security Log
This page shows the current security log of the Broadband router.
It displays any illegal attempts to access your network.
At the bottom of the page, the security log can be saved <Save>
to a local file for further processing or the security log can be
cleared <Clear> or it can be refreshed <Refresh> to get the
most updated situation. When the system is powered down, the
security log will disappear if not saved to a local file.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 DHCP Client Log
View your LAN client's information that is currently linked to the Broadband router's DHCP server
Parameters
Description
DHCP Client Log
This page shows all DHCP clients (LAN PCs) currently
connected to your network. Number of DHCP Clients displays
the number of LAN clients that are currently linked to the
Broadband router’s DHCP server. The DHCP Client Log displays
the IP address and the MAC address of each LAN Client. Use
the Refresh button to get the most updated situation
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Tool
This page includes the basic configuration tools, such as Configuration Tools (save or restore
configuration settings), Firmware Upgrade (upgrade system firmware) and Reset.
Parameters
Description
4.1 Configuration Tools
You can save the router’s current configuration, restore the
router’s saved configuration files and restore the router’s factory
default settings
4.2 Firmware Upgrade
4.3 Reset
This page allows you to upgrade the router’s firmware
You can reset the router’s system should any problem exist
Select one of the above three Tools Settings selection and proceed to the manual’s relevant
sub-section
72
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1 Configuration Tools
The Configuration Tools screen allows you to save (Backup) the router’s current configuration
setting. Saving the configuration settings provides an added protection and convenience should
problems occur with the router and you have to reset to factory default. When you save the
configuration setting (Backup) you can re-load the saved configuration into the router through the
Restore selection. If extreme problems occur you can use the Restore to Factory Defaults
selection, this will set all configurations to its original default settings (e.g. when you first
purchased the router).
Parameters
Description
Configuration Tools
Use the "Backup" tool to save the Broadband router current
configuration to a file named "backup_config.exe" on your PC.
You can then use the "Restore" tool to restore the saved
configuration to the Broadband router. Alternatively, you can use
the "Restore to Factory Defaults" tool to force the Broadband
router to perform a power reset and restore the original factory
settings.
Note: Click <More Configuration> after making a selection and
follow the instructions
73
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Firmware Upgrade
This page allows you to upgrade the router’s firmware
Parameters
Description
Firmware Upgrade
This tool allows you to upgrade the Broadband router’s system
firmware. To upgrade the firmware of your Broadband router,
you need to download the firmware file to your local hard disk,
and enter that file name and path in the appropriate field on this
page. You can also use the Browse button to find the firmware
file on your PC.
Once you’ve selected the new firmware file, click <Apply> at the bottom of the screen to start the
upgrade process. (You may have to wait a few minutes for the upgrade to complete). Once the
upgrade is complete you can start using the router.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Reset
You can reset the router’s system should any problem exist. The reset function essentially
Re-boots your router’s system
Parameters
Reset
Description
In the event that the system stops responding correctly or in
some way stops functioning, you can perform a reset. Your
settings will not be changed. To perform the reset, click on the
<APPLY> button. You will be asked to confirm your decision.
The reset will be complete when the power light stops blinking.
Once the reset process is complete you may start using the
router again.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
How to Manually find your PC’s IP and MAC address
1) In Window’s open the Command Prompt program
2) Type Ipconfig /all and <enter>
•
•
•
Your PC’s IP address is the one entitled IP address (192.168.1.77)
The router’s IP address is the one entitled Default Gateway (192.168.1.254)
Your PC’s MAC Address is the one entitled Physical Address (00-50-FC-FE-02-DB)
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Specifications
Standards
IEEE820.3(Ethernet)
IEEE802.3u(Fast Ethernet)
IEEE802.3x(Flow Control)
Protocols
Security
NAT , PPPoE , HTTP , DHCP client/server
TCP/IP , SMTP ,DDNS
Netural firewall , local password , DMZ, Virtual Servers,
Access Control, ,Bridge mode, PPTPfor VPN ,
IPSec Pass-thru for VPN , L2TP forVPN ,
SPI/DoS
Management
Wan port
Lan port
Web-based management
1x10 10/100 Base-T (RJ-45)
4x10 10/100 Base-T auto sensing (RJ-45)
power,duplex , LAN link act ,WAN link act
190(L)mm * 100 mm (W)* 30 mm (H)
FCC Class B, CE Mark ,C-Tick
20 Mbps
Leds
Dimensions
Regulartion
Throughput
Power
12V/0.5A DC Linear Power Adaptor
270 g
Weight
Temperature
Humidity
10-55℃
0-90% (NonCondensing)
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Bridge: A bridge is an intelligent, internetworking device that forwards or filters packets between
different networks based on data link layer (MAC) address information.
Default Gateway (Router): Every non-router IP device needs to configure a default gateway’s IP
address. When the device sends out an IP packet, if the destination is not on the same network,
the device has to send the packet to its default gateway, which will then send it out towards the
destination.
DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives every computer
on your home network an IP address.
DNS Server IP Address: DNS stands for Domain Name System, which allows Internet servers to
as 192.34.45.8). A DNS server keeps a database of Internet servers and their respective domain
names and IP addresses, so that when a domain name is requested (as in typing
"Broadbandrouter.com" into your Internet browser), the user is sent to the proper IP address. The
DNS server IP address used by the computers on your home network is the location of the DNS
server your ISP has assigned to you.
DSL Modem: DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone
lines to transmit data at high speeds.
Ethernet: A standard for computer networks. Ethernet networks are connected by special cables
and hubs, and move data around at up to 10/100 million bits per second (Mbps).
Idle Timeout: Idle Timeout is designed so that after there is no traffic to the Internet for a pre-
configured amount of time, the connection will automatically be disconnected.
IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP address consists
of a series of four numbers separated by periods, that identifies a single, unique Internet
computer host in an IP network. Example: 192.168.2.1. It consists of 2 portions: the IP network
address, and the host identifier.
The IP address is a 32-bit binary pattern, which can be represented as four cascaded decimal
numbers separated by “.”: aaa.aaa.aaa.aaa, where each “aaa” can be anything from 000 to 255,
or as four cascaded binary numbers separated by “.”: bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb,
where each “b” can either be 0 or 1.
A network mask is also a 32-bit binary pattern, and consists of consecutive leading
1’s followed by consecutive trailing 0’s, such as
11111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be
described simply as “x” number of leading 1’s.
When both are represented side by side in their binary forms, all bits in the IP address that
correspond to 1’s in the network mask become part of the IP network address, and the remaining
bits correspond to the host ID.
For example, if the IP address for a device is, in its binary form,
11011001.10110000.10010000.00000111, and if its network mask is,
11111111.11111111.11110000.00000000
It means the device’s network address is
11011001.10110000.10010000.00000000, and its host ID is,
00000000.00000000.00000000.00000111. This is a convenient and efficient method for routers
to route IP packets to their destination.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for
the Internet router located at the ISP's office.
ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for
individuals and other businesses or organizations.
LAN: Local Area Network. A LAN is a group of computers and devices connected together in a
relatively small area (such as a house or an office). Your home network is considered a LAN.
MAC Address: MAC stands for Media Access Control. A MAC address is the hardware address
of a device connected to a network. The MAC address is a unique identifier for a device with an
Ethernet interface. It is comprised of two parts: 3 bytes of data that corresponds to the
Manufacturer ID (unique for each manufacturer), plus 3 bytes that are often used as the product’s
serial number.
NAT: Network Address Translation. This process allows all of the computers on your home
network to use one IP address. Using the broadband router’s NAT capability, you can access the
Internet from any computer on your home network without having to purchase more IP addresses
from your ISP.
Port: Network Clients (LAN PC) uses port numbers to distinguish one network
application/protocol over another. Below is a list of common applications and protocol/port
numbers:
Application
Telnet
FTP
Protocol Port Number
TCP
TCP
TCP
TCP
TCP
UCP
23
21
SMTP
POP3
25
110
1720
161
162
80
H.323
SNMP
SNMP Trap UDP
HTTP
PPTP
TCP
TCP
1723
5631
5632
PC Anywhere TCP
PC Anywhere UDP
PPPoE: Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a secure data
transmission method originally created for dial-up connections; PPPoE is for Ethernet
connections. PPPoE relies on two widely accepted standards, Ethernet and the Point-to-Point
Protocol. It is a communications protocol for transmitting information over Ethernet between
different manufacturers
Protocol: A protocol is a set of rules for interaction agreed upon between multiple parties so that
when they interface with each other based on such a protocol, the interpretation of their behavior
is well defined and can be made objectively, without confusion or misunderstanding.
Router: A router is an intelligent network device that forwards packets between different
networks based on network layer address information such as IP addresses.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Subnet Mask: A subnet mask, which may be a part of the TCP/IP information provided by your
ISP, is a set of four numbers (e.g. 255.255.255.0) configured like an IP address. It is used to
create IP address numbers used only within a particular network (as opposed to valid IP address
numbers recognized by the Internet, which must be assigned by InterNIC).
TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and Unreliable Datagram
Protocol (UDP). TCP/IP is the standard protocol for data transmission over the Internet. Both TCP
and UDP are transport layer protocol. TCP performs proper error detection and error recovery,
and thus is reliable. UDP on the other hand is not reliable. They both run on top of the IP (Internet
Protocol), a network layer protocol.
WAN: Wide Area Network. A network that connects computers located in geographically
separate areas (e.g. different buildings, cities, countries). The Internet is a wide area network.
Web-based management Graphical User Interface (GUI): Many devices support a graphical
user interface that is based on the web browser. This means the user can use the familiar
Netscape or Microsoft Internet Explorer to Control/configure or monitor the device being managed.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
|