MC7100
Suffix A
User’s Guide
CD Clock Radio with
Dual Alarm and
Detachable Speaker
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operat-
ing instructions carefully. Please note that these
are general precautions and may not pertain to
your unit. For example, this unit may not have
the capability to be connected to an outdoor
antenna.
8. ACCESSORIES
Do not place this product on an unstable cart,
stand, tripod, bracket or table. The product may
fall, causing serious injury and serious damage
to the product. Use only with a cart, stand, tripod,
bracket or table recommended by the manufac-
turer or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting acces-
sory recommended by the manufacturer.
1. READ INSTRUCTIONS
All the safety and operating instructions should be
read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
8A. An appliance and cart combination
PORTABLE CART WARNING
(symbol provided by RETAC)
should be moved with care. Quick
3. HEED WARNINGS
stops, excessive force and uneven
surfaces may cause the appliance
and cart combination to overturn.
All warnings on the product and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
9. VENTILATION
All operating and use instructions should be fol-
lowed.
5. CLEANING
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
Slots and openings in the cabinet and in the back
or bottom are provided for ventilation, to ensure
reliable operation of the product and to protect it
from overheating. These openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should
never be placed near or over a radiator or heat
source. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the man-
ufacturer's instructions have been adhered to.
10. POWER SOURCES
Do not use attachments not recommended by
the product's manufacturer as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this product near water–for example:
near a bathtub, washbowl, kitchen sink or laun-
dry tub; in a wet basement; or near a swimming
pool.
This product should be operated only from the
type of power source indicated on the marking
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
label. If you are not sure of the type of power
supply to your home, consult your appliance
dealer or local power company. For products
intended to operate from battery power, or other
sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alter-
nating-current line plug (a plug having one blade
wider than the other). This plug will fit into the
power outlet only one way. This is a safety fea-
ture. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
the service technician uses replacement parts
specified by the manufacturer or those that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
19. SAFETY CHECK
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
20. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceil-
ing only as recommended by the manufacturer.
21. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is dam-
aged.
b. If liquid has been spilled or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by fol-
lowing the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet
has been damaged.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched by
items placed upon or against them, paying partic-
ular attention to cords at plugs, convenience
receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
15. OVERLOADING
f. When the product exhibits a distinct change in
performance–this indicates a need for service.
22. HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves
or other products (including amplifiers) that pro-
duce heat.
Do not overload wall outlets and extension cords 23. NOTE TO CATV SYSTEM INSTALLER
as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
This reminder is provided to call the CATV sys-
tem installer's attention to Article 820-40 of the
NEC that provides guidelines for proper ground-
ing and, in particular, specifies that the cable
ground shall be connected to the grounding sys-
tem of the building, as close to the point of cable
entry as practical.
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type
of liquid on the product.
17. SERVICING
24. NONUSE PERIODS
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18. REPLACEMENT PARTS
The power cord of the appliance should be
unplugged from the outlet when left unused for a
long period of time.
When replacement parts are required, be sure
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement
your equipment offers. This manufacturer and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of your equipment by playing it at a
safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hear-
ing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid pro-
longed exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. Left Detachable
FRONT
Speaker
1
2
34 5 6 7 8 9 10
11
2. POWER Button
3. RADIO/BAND Button
4. SNOOZE Button
5. ALARM 1/2 ON/OFF
Button
6. REPEAT/ALARM 1/2
SET Button
7. VOLUME Down Button
8. Display
9. VOLUME Up Button
10. DOOR OPEN Switch
11. Right Speaker
12. Play/Pause ®p)/CD
(
12 13 14 15 1617
REAR
Button
13. PROG./CH SAVE
Button
14. STOP (I)/CLOCK SET
Button
15. Tune/Skip/Search/Hr
o Button
16. MODE/CH+/ALARM
SELECT Button
17. Tune/Skip/Search/Min
n Button
18. FM Antenna Wire
19. Stand
20. Battery Compartment
21. DC Jack
22. Left Speaker Jack
23. Left Speaker Wire
24. SNOOZE Button
18 19 20
21 22 23
24
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
AC ADAPTER CONNECTION
Connect the AC adapter (included) to an AC outlet having 120V, 60Hz AC only.
Plug the small end into the DC jack on the rear of the unit.
CAUTION: Do not touch the AC adapter with wet hands. Fully insert the plug with-
out exposing any part of the blade.
DC 6V
Z
INSERTING BATTERIES
Two AAA size batteries can also be used to power and/or to provide a backup for
the clock and alarm time for this unit as follows:
1. Open the battery door by sliding it towards the bottom of the unit.
2. Insert two (2) “AAA” batteries as shown. Alkaline batteries are recommended
for the longest playing time.
3. Slide the battery door back on.
NOTE: The batteries are used to back-up the clock and alarm time only when the
AC adapter is disconnected or if there is a power failure.
+
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to pre-
vent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
BACKLIGHT
If the power supply is connected to the DC 6V IN jack, the backlight will always
light on in the display.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION (CONTINUED)
SPEAKER CONNECTION
1. The right speaker cannot be removed from the unit. The left speaker can be
removed from the unit, if desired. To remove the left speaker, simply push up
on the speaker as shown in figure 1. To reinsert the speaker, line up the pins as
shown in figure 2 and push down until a click is hear.
FIGURE 1
FIGURE 2
2. Connect the left speaker to the Left Speaker jack as shown in figure 3. To extend
the speaker wire, connect the speaker plug into the extender (the side with the
hole) and the other side of the extender (with the pin) into the speaker jack (see
figure 4).
Original
speaker
wire
Connect
to speaker
jack
FIGURE 3
FIGURE 4
CAUTION: Only connect the speakers which are supplied with the unit. The use of
any other or additional speakers may cause damage to the unit. Never operate the
unit without the speakers connected.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
TO LISTEN TO THE RADIO
1
2
2
1
2
1
MANUAL TUNING: Repeatedly press the
Tune/Skip/Search/Min n 1 or Hr o 2 button
to manually advance the frequency in the
display up or down until the desired frequen-
cy appears. The display will revert back to
the time display after a few seconds.
Press the POWER button 1 to turn the
unit on. Press the RADIO/BAND button
2 to select radio. Repeatedly press the
RADIO/BAND button 2 to select AM or
FM.
3
4
2
1
AUTOMATIC TUNING: Press and hold Adjust the VOLUME buttons as
desired. When listening to an FM radio
station that is broadcasting in Stereo,
the Stereo ( ) indicator will appear. If
the radio broadcast is not strong
enough or not in stereo, the Stereo
the Tune/Skip/Search/Min n 1 or Hr o
2 button until the frequency in the dis-
play starts to scan, and then release
the button; the tuner will search and
then stop on the next strong station it
finds. Repeat this step until the desired
frequency appears in the display. The
display will revert back to the time dis-
play after a few seconds.
(
) indicator will not appear in the dis-
play.
Antennas
FM: Unravel and extend the FM antenna wire for best reception.
AM: Turn the unit for better AM reception.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
RADIO PRESETS–Up to 5 AM and 5 FM
1
2
2
1
1
3
Select a station using the Tune/Skip/
Search/Min n 1 or Hr o 2 buttons.
Press the PROG./CH SAVE button 3;
the preset number will blink in the dis-
play. Within three seconds, press the
MODE/CH+/ALARM SELECT button
4 until the desired memory number
appears on the display.
Press the POWER button 1 to turn the
unit on. Press the RADIO/BAND button
2 to select radio. Repeatedly press the
RADIO/BAND button 2 to select AM or
FM.
3
4
1
3
Press the PROG./CH SAVE button Repeat steps 2 and 3 to program up to
5 stations in each band, if desired.
TO RECALL: Follow step 1 above.
Repeatedly press the MODE/CH+/
ALARM SELECT button to select a
preset; the station will automatically be
tuned in.
again to set the station in the selected
memory.
INSERTING A CD
Slide the DOOR OPEN switch to the
right and the CD door will open, then
gently pull out the CD door. Gently
insert a CD onto the spindle (label
side facing forward) until it clicks.
Close the CD door.
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO PLAY A CD
1
2
1
2
If in the Stop mode, press the Play/
Pause ®p)/CD button to start play-
back. TO PAUSE PLAYBACK, press
Press the POWER button 1 to turn the
unit on and insert a CD as described on
(
the previous page. Press the Play/Pause the Play/Pause ®p)/CD button again;
(
®p)/CD button 2 to select CD; the total the elapsed track time will blink in the
(
number of tracks and playing time will
appear in the display, then playback will
start automatically.
display for a few seconds, then the time
will appear and the track number will
blink. Press again to resume playback.
3
4
1
1
2
1
2
To skip forward or backward through the
tracks on the disc, press the Tune/Skip/
Search/Min n 1 or Hr o 2 button. To
search forward or backward through the
tracks on the disc, press and hold the
Tune/Skip/Search/Min n 1 or Hr o 2
button.
Adjust the VOLUME buttons 1 as
desired. When the disc is through play-
ing, it will stop. Press the STOP
(I)/CLOCK SET BUTTON 2 to stop
the disc before it is finished.
FAQS: Do I need an adapter to play 3” singles?
No, simply insert the 3” single into the groove.
What is the maximum time for a CD in this unit?
The maximum time is 74 minutes.
NOTES:
•
If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show,
“NO DISC”.
•
When you press the Tune/Skip/Search/Min n or Hr o button or the Pause button, the track
elapsed time will appear for a few seconds then revert back to the time display and the
track number will appear.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
1
2
1
2
1
2
Press the POWER button 1 to turn
the unit on and insert a CD as
described on page 9. Press the
Press the Tune/Skip/Search/Min n 1
or Hr o 2 button to select a track to
repeat.
Play/Pause ®p)/CD button 2 to
(
select CD; the total number of tracks
and playing time will appear in the dis-
play, then playback will start automati-
cally.
TO REPEATEDLY PLAY BACK ALL
TRACKS
3
1
2
1
2
1
Press the REPEAT/ALARM 1/2 SET
Button 1 once; “REP” will appear in the
display and the unit will play the same
track over and over until the Stop
(I)/CLOCK SET Button 2 is pressed.
Follow step
1
above. Press the
REPEAT/ALARM 1/2 SET Button 1
twice; “REP ALL” will appear in the dis-
play and the unit will play all the tracks
on the CD over and over until the Stop
(I)/CLOCK SET Button 2 is pressed.
TO CANCEL REPEAT MODE, press the REPEAT button until the
Repeat indicator disappears from the display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
2
1
2
1
2
3
Press the POWER button 1 to turn the
unit on and insert a CD as described on
Press the PROG./CH SAVE button 1
once; “P 01” (program number), “00”
track number and the Program indicator
will appear in the display. Select the first
track to be played back using the
Tune/Skip/Search/Min n 2 or Hr o 3
button, then press the PROG./CH SAVE
button 1 again. Repeat this step to pro-
gram additional tracks, up to 20 tracks.
page 9. Press the Play/Pause ®p)/CD
(
button 2 to select CD; the total number of
tracks and playing time will appear in the
display, then playback will start automati-
cally. Press the STOP (I)/CLOCK SET
BUTTON 3 to stop automatic playback.
3
4
1
1
2
Adjust the VOLUME buttons 1 as desired.
When the disc is through playing, it will stop.
Press the STOP (I)/CLOCK SET BUTTON
2 to stop the disc before it is finished.
Press the PLAY/PAUSE (®p)/CD but-
ton to begin playback. The unit will play
all the tracks in the order you pro-
grammed them.
NOTES:
•
To skip forward or backward through the programs, press the
Tune/Skip/Search/Min n or Hr o button. When the disc is through playing, it
will stop.
•
Programming is the ability to preselect the order in which a series of tracks will
be played.
FAQ:
How do I clear the memory and exit the program playback mode?
While in the program stop mode, press the STOP (I)/CLOCK SET
BUTTON to clear the program and exit the program mode. The display
will show the total tracks and time of the disc again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
RANDOM PLAYBACK
1
2
1
2
To play the tracks on the CD in a ran-
dom order, while in the Stop mode,
press the MODE/CH+/ALARM
SELECT button once and "RAND" will
appear in the display.
Press the PLAY/PAUSE (®p)/CD button
1. The unit will randomly play each track
on the CD and then stop. If you want to ran-
domly playback the tracks repeatedly, press
the REPEAT/ALARM 1/2 SET Button 2
twice during random playback. To cancel
and stop Random or Random Repeat play-
back, press the STOP (I)/CLOCK SET
BUTTON 3; the “REP ALL” and “RAND”
indicators will disappear from the display.
INTRO PLAYBACK
1
2
1
2
To play the first 10 seconds of each
track on the CD, while in the Stop
mode, press the MODE/CH+/ALARM
SELECT button repeatedly until
"INTRO" appears in the display.
Press the PLAY/PAUSE (®p)/CD button
1. The unit will play the first 10 seconds
of each song and then stop. If you want
to playback the first ten seconds of the
tracks repeatedly, press the REPEAT/
CLOCK/ALARM SET button 2 twice dur-
ing INTRO playback. To cancel and stop
INTRO playback or INTRO Repeat play-
back, press the STOP (I)/CLOCK SET
BUTTON 3; the “REP ALL” and “INTRO”
indicators will disappear from the display.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO SET OR RESET THE ACTUAL TIME
1
2
2
1
With the power off, press the STOP
(I)/CLOCK SET BUTTON; the time
will blink.
Press the Tune/Skip/Search/Min n
button 1 to set the present minute
and the Tune/Skip/Search/Hr o but-
ton 2 to set the present hour. Make
sure to set the correct AM/PM
setting.
3
Press the STOP (I)/CLOCK SET
BUTTON and the time will be set.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
1
2
3
1
2
1
With the power off, press the REPEAT/
CLOCK/ALARM SET button 1 repeated-
ly; the alarm time and Alarm 1 or Alarm 2
indicator will appear. Select Alarm 1 or
Alarm 2, then press the STOP (I)/CLOCK
Press the Tune/Skip/Search/Min n button
1 to set the alarm minute and the
Tune/Skip/Search/Hr o button 2 to set the
alarm hour. Press the STOP (I)/CLOCK
SET BUTTON 3 to confirm. Make sure to
set the correct AM/PM setting.
SET BUTTON 2; the alarm time will blink.
4
3
Repeatedly press the MODE/CH+/
ALARM SELECT button to select the
If set to CD, set the track number using
the VOLUME buttons.
NOTE: Make sure the CD is
read/played before setting the Alarm
function.
alarm type: Buzzer ( ), Radio ( ) or
CD ( ).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
5
Press the ALARM 1/2 ON/OFF button to activate the alarm; the selected alarm
indicator(s) will light. Make sure the volume is set as desired and, if set to Radio,
make sure to tune a station. If set to CD, insert a CD before setting the alarm
time. When the actual time matches the selected preset alarm time(s), the unit
automatically turns on for 59 minutes and then shuts off. If set to CD, and the total
disc time is less than 59 minutes, the unit will only play the tracks on the CD, then
stop. If you select a starting track for the alarm, the unit will only playback the
selected track and the tracks following it, then stop.
TO SHUT OFF THE ALARM, see TO SHUT THE ALARM OFF section on the
next page.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO SHUT THE ALARM OFF
To shut the alarm off, press the ALARM
1/2 ON/OFF button until the selected
alarm indicator(s) appears in the dis-
play and the alarm time will be reset for
the next day. Press the ALARM 1/2
ON/OFF button so the alarm indicators
disappear from the display to turn off
the alarm and not set it for the next
day.
1
SNOOZE
The alarm can be temporarily turned
off manually by pressing the
SNOOZE button, either on top of the
unit or on the side of the left speaker;
ZZ
1
the Snooze indicator (
Z
) will blink
and the alarm will turn back on auto-
matically 10 minutes later. It can be
repeated endlessly.
NOTE:
•
When setting the alarm, if no button is pressed within 10 seconds, the dis-
play will revert back to the current time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the disc carefully. Handle the disc only
by its edges. Never allow your fingers to come
in contact with the shiny, unprinted side of the
disc.
•
•
•
•
Do not attach adhesive tape, stickers, etc. to
the disc label.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
If a disc skips or gets stuck on a section of the disc, it is probably dirty or dam-
aged (scratched).
When cleaning the disc, wipe in straight lines from the center of the disc to the
outer edge of the disc. Never wipe in circular motions.
Z
•
This unit is designed to play only discs bearing the identification
logo as shown here. Other discs may not conform to the CD stan-
dard and may not play properly.
•
•
•
Discs should be stored in their cases after each use to avoid dam-
age.
Do not expose discs to direct sunlight, high humidity, high temperatures or dust,
etc. Prolonged exposure or extreme temperatures can warp the disc.
Do not stick or write anything on either side of the disc. Sharp writing instru-
ments, or the ink, may damage the surface.
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before call-
ing for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
AC adapter is not
connected.
Check the AC adapter
connection.
turn on.
Disc will not play.
CD compartment
door not closed.
Disc inserted
incorrectly.
Close CD compartment
door.
Reinsert disc correctly.
Dirty or defective CD. Try another disc.
Moisture
Wipe disc with soft cloth.
condensation on disc.
VOLUME setting is
set to minimum.
Defective disc.
Dirty or defective
disc.
No sound.
Increase volume.
Try another disc.
Erratic playback.
Clean or replace disc.
Time reset to “12:00”. Battery connected
improperly, not con-
Check the battery.
nected or dead.
Clock not set.
Set the clock.
Alarm does not
turn on.
Alarm is not activated Set and activate alarm as
or set properly.
Clock is not set.
Alarm is not set.
described on page 15.
Set the clock.
Set the alarm.
AM or FM, no sound. Power is not on.
Press the POWER button
to turn the unit on.
Increase volume.
VOLUME setting is
set to minimum.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO
Frequency Range (AM)..................................................520–1710KHz
Frequency Range (FM)...................................................87.5–108MHz
CD SECTION:
Disc Diameter................................................................4.72” (120mm)
3.15” (80mm) Single CD
Optical Source.....................................................Semiconductor Laser
Wavelength ................................................................................780nm
GENERAL
Power Supply......................................DC IN Jack 6V, Center Positive
Battery Backup ...................................... 2 x 1.5V “AAA” size batteries
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT
1-800-321-6993.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|