24” TRUE FLAT STEREO COLOR TV
MODEL: MT2245
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS
COMPLETELY.
IMPORTANT: CHANNELS MUST BE SET INTO MEMORY BEFORE USING
THE CHANNEL +/– BUTTONS.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERTED.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirements for grounding electrode.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
23. HEAT
The product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC that provides guidelines for
proper grounding and, in particular,
specifies that the cable ground shall be
connected to the grounding system of the
building, as close to the point of cable entry
as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having
120V, 60 Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility
of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file
or cut the wide blade. It is the user’s responsibility to have an electrician replace the
obsolete outlet.
LOCATION OF CONTROLS
FRONT
1
2 3 4 5 6
7 8
1. POWER Button - Press to turn the TV on; the Power indicator will light red. Press again to turn the TV off;
the Power indicator will go off.
2. MENU Button - Press to access the On-Screen menu.
3. TV/CATV Button – Press to switch between the TV and the CATV (Cable TV) mode.
4. TV/AV Button – Press to switch between the TV and the video inputs.
5. VOLUME Up/Down Buttons - Press to raise or lower the volume.
6. CHANNEL Up/Down Buttons - Press to select a channel.
7. Power/Timer Indicator - Lights red when the TV is on. Lights orange when the TV is on and the On Timer
option is on. Lights green when the TV is off, and the On Timer is on.
8. REMOTE SENSOR
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
SIDE
9
9
10
11
9. Carrying Handles
11. Headphone Jack - Headphones (3.5mm) can be
connected here for private listening.
10. AV3 AUDIO/VIDEO IN Jacks - Audio and Video
signal cables from an external source can be
connected here. AV button must be set to VIDEO3.
REAR PANEL
12
13
14
15
16
17
12. S-VIDEO IN Jack (Rear of Unit) - Connect an external unit that utilizes an S-video cable to this jack.
13. VHF/UHF IN Jack (Rear of Unit) - Connect a VHF/UHF antenna, CATV, VCR, satellite, etc. cable to this jack.
14. AV AUDIO/VIDEO OUT Jacks - Audio and Video signal cables from an external source can be connected
here. AV button must be set to regular TV or CATV.
15. AV1 AUDIO/VIDEO IN Jacks - Audio and Video signal cables from an external source can be connected
here. AV button must be set to VIDEO1.
16. AV2 AUDIO/VIDEO IN Jacks - Audio and Video signal cables from an external source can be connected
here. AV button must be set to VIDEO2.
17. AV2 (DVD) Cr,Cb,Y IN Jacks - Cr, Cb, Y signal cables from an external source can be connected here. AV
button must be set to VIDEO2.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
13
1
2
3
4
14
15
16
17
5
6
18
19
20
21
22
23
24
25
26
The chart below will show you
the remote button’s function
when in the desired mode
(TV, VCR, CABLE, DVD). For
example, to Play a tape in a
VCR, press the VCR Function
button, then the Navigation
(ꢀ) button as this button is
also the VCR Play button.
Please note that you have to
program the remote for the
external component before
using it (except for the TV).
7
8
9
10
11
12
No.
1.
2.
TV
VCR
CABLE
VCR Function Button
TV Function Button
N/A
DVD
VCR Function Button
TV Function Button
AV Button
VCR Function Button
TV Function Button
N/A
VCR Function Button
TV Function Button
SKIP–
3.
4.
5.
6.
POWER Button
Direct Channel Buttons
-/-- Button
POWER Button
Direct Channel Buttons
ENTER
POWER Button
Direct Channel Buttons
ENTER
POWER Button
Number Buttons
+10
7.
8.
Navigation (ꢀ) Button
MENU Button
PLAY
N/A
N/A
N/A
PLAY
MENU
9.
N/A
N/A
REWIND
STOP
N/A
N/A
N/A
N/A
OPEN/CLOSE Button
REWIND
STOP
RETURN
Program Indicator
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Navigation (➛) Button
Navigation (❷) Button
TV/CATV Button
Program Indicator
CTV (Cable) Function Button
DVD Function Button
SLEEP Button
CH (Channel) +/– Buttons
VOL (Volume) +/– Buttons
RECALL Button
TV MUTE Button
EXIT Button
PICTURE Button
Navigation (❿) Button
SOUND Button
C.R. Button
S.MPX Button
N/A
Program Indicator
Program Indicator
CTV (Cable) Function Button CTV (Cable) Function Button CTV (Cable) Function Button
DVD Function Button
N/A
CH (Channel) +/– Buttons CH (Channel) +/– Buttons UP/DOWN
VOL (Volume) +/– Buttons VOL (Volume) +/– Buttons RIGHT/LEFT
LAST
TV MUTE Button
N/A
PAUSE
FAST FORWARD
N/A
N/A
DVD Function Button
N/A
DVD Function Button
SKIP +
LAST
TV MUTE Button
SELECT
AUDIO
SETUP
PAUSE
FAST FORWARD
TITLE
N/A
N/A
N/A
N/A
N/A
N/A
DISPLAY
INDEX
RECORD
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL (CONTINUED)
BATTERY INSTALLATION
1
1
2
3
+
-
2
-
+
+
-
Open the battery compartment cover.
Install four “AAA” batteries, paying
attention to the polarity diagram in the
battery compartment.
Replace the battery compartment
cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTES:
• When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
10 ft
(please advise)
• When direct sunlight, incandescent lamp, fluorescent
lamp or any other strong light shines on the REMOTE
SENSOR of the TV, the remote operation may be
30° 30°
unstable.
FAQs:
Why is the remote control not working properly?
•
•
•
•
•
•
•
•
The remote control is not aimed at the sensor.
The remote control is too far away from the remote sensor.
There is too much light in the room.
There is an obstacle in the path of the beam.
The batteries are weak or dead.
The batteries are inserted incorrectly.
The TV is not plugged in.
The proper Function button is not pressed. For Example, press the TV button to use the remote to operate the TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL (CONTINUED)
CUSTOMIZING YOUR REMOTE CONTROL
Your TV comes equipped with a universal remote control. In addition to controlling the TV, this universal remote can also
operate a VCR, DVD player and a cable box (even if your units are made by manufacturers other than Memorex). If you
accidentally change the program for your TV, simply use 0001 as the television code.
SETTING UP YOUR REMOTE TO OPERATE YOUR VCR, DVD AND/OR CABLE BOX
1
2
Turn the unit you want to program the remote for off.
Press the desired Function button (VCR, CTV, DVD).
3
4
Enter the 4 digit code corresponding to your set as listed on
the following pages, the indicator will go out immediately.
Test the remote by pressing the POWER button, and if it
does not work, repeat steps 3 and 4 using another code, or
try the Auto Search procedure as described below.
Press and hold the CH+ and the VOL– buttons at the same
time until the red Program indicator at the top of the remote
lights.
IMPORTANT: After pressing another function button and using an external unit (such as a VCR), you
must press the TV Function button again to operate the TV.
AUTO SEARCH PROCEDURE
1
2
2
1
Press the desired Function button (VCR, CTV, DVD). Press
and hold the CH+ and the VOL– buttons at the same time
until the red Program indicator at the top of the remote
lights.
Press the POWER button ❶ and the Auto Search mode will
begin.
Press the desired Function button ❷, or hold the CH+ and
VOL– buttons together to exit the search mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CODES
DVD PLAYERS
BRAND
AKAI
DENON
HITACHI
JVC
KENWOOD
MAGNAVOX
MEMOREX
MITSUBISHI
ONKYO
CODE(S)
0054
0184
0194
0084
0144
0124
0204
0134
BRAND
CODE(S)
0104,0114
0154
0154
0074
0034
0014
0024
0164
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TECHNICS
THOMSON
TOSHIBA
YAMAHA
ZENITH
0064,0124
0024
0094,0124
0044,0124
0004,0024,0094
0124
PANASONIC
PHILIPS
CABLE/SATELLITE BOXES
BRAND
ABC
ANTRONIX
ARCHER
CODE(S)
0253, 0373
0133
0133, 0283
0073
0163
BRAND
OAK
OAK SIGMA 450
OAK SIGMA 550
PANASONIC TZ 120/130 0473
PANASONIC TZ 170/180 0443
PANASONIC TZ140
PANASONIC TZ 150/160 0453
PARAGON
PHILIPS
CODE(S)
0103
0543
0533
BBT
CABLETIME
CABLEVISION
COLOUR VOICE
COMTRONICS
EAGLE COMRONICS
EASTERN
ELECTRICORD
ELECRUS
GE
GEC CABLE SYSTEM
HAMLIN H5
HAMLIN H6
HAMLIN H6S
HAMLIN H8
HAMLIN H9
JERROLD
JERROLD 400L
JERROLD 450L
JERROLD 550
JERROLD OSD CATV
JERROLD SPRUCER
MAGNAVOX/PHILIPS
MAMM
0193
0463
0303,0343
0213, 0273
0273
0063
0203
0263
0113, 0123
0193
0673
0663
0653
0643
0633
0253
0623
0613
0603
0593
0383
0033, 0213, 0303, 0313,
0323, 0333, 0343
0083
PIONEER
PIONEER BR50
PIONEER BR50/
70/80/81/82
PIONEER BR90
PULSAR
RCA DIGITAL
SATELLITE SYSTEM
REALISTIC
REGENCY/EASTERN
RUNCO
0003
0693
0553
0383
0393, 0403
0133
0683
0383
0273
SAMSUNG
SCIENTIFIC ATLANTIC 0573, 0363, 0583, 0563
SIGNAL
SL MARX
SPECTRAVISION
STANDARD COMP.
STARCOM V
STARGATE
SYLVANIA/TEXSCAN
TEKNIKA
0273
0273
0233
0183
0253
0273
0373, 0493
0173
0433
0413, 0423
0293
0383
0143, 0203
0013
MEMOREX
MOVIE TIME
NORTHCOAST
NSC
0143
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CODES (CONTINUED)
CABLE/SATELLITE BOXES (CONTINUED)
BRAND
CODE(S)
0053
0273
0183, 0373
0023
0223, 0353
0523
BRAND
TOSHIBA
TUDI
CODE(S)
0383
0043
0133
0133, 0153, 0203, 0283
0093
0213
TELESERVICE
TELEVIEW
TEXSCAN
TFC
TOCOM
TOCOM 5503A
TOCOM 5503VIP/5507
TOCOM TC56
UNIKA
UNIVERSAL
VIDEOWAY
VIEWSTAR
ZENITH
0513
0503
0243, 0383, 0483
VCRs
BRAND
A TANDY
ADVENTURA
AIKO
AIWA
AKAI
CODE(S)
BRAND
CODE(S)
0902
0992
0982
0992
0872, 0892, 0912, 0912,
0952, 0992
0002, 0992
0682, 0692, 0642, 0902
0672, 0932
0992
FINLUX
FISHER
FUJI
0262,0942,0952,0962, 0972
AMERICAN HIGH 0932
FUNAI
AMSTRAD
ASA
ASHA
AUDIO DYNAMICS 0202
AUDIOVOX
BEAUMARK
0992
0002, 0912
0922
GURRARD
GE
0992
0662, 0822, 0932
0642, 0652
0082, 0632, 0912
0402
0992
0612, 0902
0002
GO VIDEO
GOLDSTAR
GOODMAN’S
GRADIENTE
GRANDA
GRUNDIG
H/K
0912
0922
BELL & HOWELL 0902
BLAUPUNKT
BROKSONIC
BUSH
0412
0872, 0882, 0892
0852
0912
0622
HARLEY DAVIDSON 0992
HARMON KARDON 0622
CALIX
CANON
CCE
0862
0852, 0982
HARWOOD
HEADQUARTER 0612
0752, 0852
CITIZEN
COLT
CRAIG
0912, 0982
0852
0832,0842,0852,0912,0922
HI-Q
HINARI
HITACHI
0842
0852
0102, 0562, 0572, 0592,
CURTIS MATHIS 0662, 0822, 0932
0602, 0992, 0582
CYBERNEX
DAEWOO
DBX
0922
0802 ,0812, 0982
0202
ITT
JVC
KENWOOD
KLH
0942
0202, 0522, 0532, 0542, 0552
0202, 0542, 0612, 0632, 0902
0852
DYNATECH
0472, 0992
ELECTROHOME 0912
ELECTROPHONIC 0912
KODAK
LLOYD
LOGIK
LUXOR
LXI
0912, 0932
0992
0852
EMEREX
0792
EMERSON
0072, 0122, 0132, 0142,
0152, 0162, 0172, 0182,
0192, 0212, 0702, 0712,
0722, 0732, 0742, 0882
0752, 0762, 0772, 0782,
0942
0022, 0912
0002, 0482, 0492, 0502,
0512, 0932
0922
MAGNAVOX
MAGNIN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CODES (CONTINUED)
VCRs (CONTINUED)
BRAND
CODE(S)
BRAND
CODE(S)
MARANTZ
MARTA
MATSUSHITA
MATSUI
MEI
MEMOREX
0002, 0202, 0402, 0632, 0932 SALORA
0612, 0762
0212, 0312, 0922, 0962
0472, 0512
0292, 0542, 0832
0242, 0612, 0842, 0902, 0922
0002, 0282
0912
0932
SAMSUNG
SANKY
0722
0222, 0932
SANSUI
SANYO
0232, 0242, 0472, 0512, 0612, SBR
0842, 0902, 0912, 0922
0452, 0482, 0542, 0762, 0952 SCOTT
0472, 0932
SCHNEIDER
0652
MITSUBISHI
MOTOROLA
MTC
MULTITECH
NAD
0342, 0712, 0762, 0872,
0882, 0892
0302, 0592, 0602, 0612,
0682, 0692, 0842, 0902,
0912, 0932
0922, 0992
SEARS
0852, 0992
0442
NEC
0202, 0292, 0422, 0432,
0542, 0632
0912
0922
0412, 0932
0442, 0472, 0912
0402
0212, 0722, 0742, 0772
0912
0012, 0052, 0092, 0222, 0372,
0382, 0392, 0412, 0932
0202, 0432, 0602, 0632,
0692, 0912, 0922, 0932
0592, 0602
SHARP
0402, 0472
0652
0922
0852
0032, 0332, 0352, 0362,
0672, 0792, 0932
0602
SHIMTOM
SHOGUM
SINGER
SONY
NIKKO
NOBLEX
OLYMPUS
OPTIMUS
OPTONICA
ORION
STS
SUNPAK
SYLVANIA
0352
OSAKI
PANASONIC
0002, 0492, 0502, 0762,
0932, 0992
0992
0992
0712, 0992
SYMPHONIC
TANDY
TASHIKO
TEAC
TECHNICS
TEKNIKA
PENNY
PENTAX
PERDIO
PHILCO
PHILIPS
PILOT
PIONEER
PULSAR
QUARTER
QUARTZ
QUASAR
RADIO SHACK
RADIX
0992
0932
0992
0002, 0932
0322, 0912, 0932, 0992
0252
0212, 0732, 0772, 0922
0062, 0302, 0342, 0682,
0712, 0762
0002, 0282, 0402, 0492, 0932 TELEFUNKEN
0912
0442, 0542
0512
0612
0272, 0612
0382, 0392, 0932
0912, 0992
0912
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH 0302, 0432, 0632
VICTOR 0542, 0552
VIDEO CONCEPTS 0202, 0432, 0632, 0952
0912, 0922
0922
RANDEX
RCA
0912
WARDS
0322, 0402, 0472, 0482,
0602, 0712, 0842, 0852,
0922, 0932, 0992
0202, 0632
0042, 0362, 0512, 0672
0112, 0382, 0392, 0482, 0592,
0602, 0662, 0822, 0942
0402, 0472, 0612, 0682,
0842, 0902, 0912, 0922,
0932, 0992
REALISTIC
YAMAHA
ZENITH
RICOH
0352, 0382
SAISHO
0212, 0582, 0722, 0732,
0742, 0772
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE (CATV)/SATELLITE CONNECTIONS
This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some
Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal
viewing requires the use of a descrambler device which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the
rear of the TV.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a converter/descrambler box, connect
the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm cable, connect the output of
the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set the
TV/VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the
converter/descrambler or satellite box to select channels.
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED
PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels
require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronic supply store). Follow the connections shown below. With the switch in the “B” position, you can
directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the
converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.
FAQS:
I connected my cable, why can’t I get channels above 69?
Make sure TC/CATV is set to CATV, see page 20. Also, make sure your cable company broadcasts channels in the range
you are searching.
Are the cables included?
No, the cables are sold separately, visit your local electronics’ store.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTDOOR ANTENNA CONNECTIONS
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 12.
Combination VHF/UHF
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin–lead wire)
Antenna (Separate VHF and
UHF 300 ohm twin–leads)
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
lead wire use a 300-75 ohm
matching transformer, then
connect the transformer to the
combiner.
Connect the 75 ohm cable from Connect the UHF twin-lead wire to a
combination VHF/UHF antenna to the combiner (NOT SUPPLIED). Connect
antenna jack.
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
OR
If your combination antenna has a 300 Attach the transformer to the combiner.
ohm twin-lead wire, use a 300-75 ohm Attach the combiner to the antenna jack.
matching transformer (NOT SUPPLIED).
USING THE FRONT AUDIO/VIDEO JACKS
The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a
camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks and the Video
Input jack.
To access the unit connected to
these jacks, press the AV
button so VIDEO3 appears on
the screen. To resume normal
TV viewing, simply press the
AV button again.
EXTERNAL SOURCE
AUDIO/VIDEO
Cord (Not
Supplied)
FAQs:
My external unit has only 1 audio jack, but this TV has two Audio input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.
How do I watch the external unit connected to the Audio/Video Input jacks?
Press the AV button so VIDEO3 appears on the screen, then start the external source.
Are the cables included?
No, the cables are sold separately, visit your local electronics’ store.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR CONNECTIONS
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the AV button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables. (CABLES NOT INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s AV1 or AV2 left and right Audio IN
jacks. Connect the VCR’s video OUT jack to the TV’s video IN jack.
3. Press the AV button until VIDEO1 or VIDEO2 appears on the TV screen and press PLAY on the VCR to watch a tape.
FAQs:
My VCR has only 1 Audio jack, but this TV has two Audio input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.
How do I watch the external unit connected to the Audio/Video Input jacks?
If connected to the coaxial jack, or AV1 jacks, press the AV button so standard TV or CATV appears on the screen, then
start the external source.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR CONNECTIONS (CONTINUED)
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable.(CABLES NOT
INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s AV1 left and right Audio IN jacks.
3. Connect the VCR’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.
4. Press the AV button until VIDEO1 appears on the TV screen and press PLAY on the VCR to watch a tape.
Follow the instructions below to connect a second VCR to Record from the TV. (CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from the TV’s Audio OUT jacks to the VCR’s left and right Audio IN jacks.
Connect the TV’s video OUT jack to the VCR’s video IN jack.
Refer to your VCR’s manual for more information on this connection.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD CONNECTIONS
Follow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT
INCLUDED.)
REAR OF TV
To
To
Video In
Audio In
Audio Cable
Video Cable
From
Audio
Out
From
Video Out
DVD PLAYER
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AV1 or AV2 left and right Audio IN
jacks. Connect the DVD’s video OUT jack to the TV’s video IN jack.
2. Press the AV button until VIDEO1 or VIDEO2 appears on the TV screen and press PLAY on the DVD to watch a DVD.
Follow the instructions below to connect a DVD player to your television using the S-Video cable. (CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AV1 left and right Audio IN jacks.
2. Connect the DVD’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.
3. Press the AV button until VIDEO1 appears on the TV screen and press PLAY on the DVD to watch the DVD.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD CONNECTIONS (CONTINUED)
Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks. (CABLES NOT
INCLUDED.)
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AV2 left and right Audio IN jacks.
2. Connect a video cable from the DVD’s Y, Pb, Pr OUT jacks to the TVs AV2 DVD IN (Cr, Cb, Y) jacks.
3. Press the AV button until VIDEO2 appears on the TV screen and press PLAY on the VCR to watch a tape.
STEREO CONNECTION
Follow the instructions below to connect a stereo system to your television. (CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from the TV’s left and right Audio OUT jacks to the stereo system’s left and right
Audio IN jacks.
2. Refer to the stereo system’s owner’s manual for instructions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE LANGUAGE
This TV can show the On-Screen display in English, Spanish or French.
1
2
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
ENGLISH
FRANCAIS
ESPANOL
COLOR
39
72
60
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BLUE BACK
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
1
1
1
2
2
Press the POWER button ❶ to turn on the TV. Press the
MENU button ❷; the MENU screen will appear.
Press the Navigation (➛) or (❿) button ❶ until LANGUAGE
is selected, then press the Navigation (❷) button ❷ to
select the desired language.
3
4
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
ENGLISH
FRANCAIS
ESPANOL
MENU
EXIT
MENU BAR
QUIT
When the desired language is in red, press the Navigation
Wait 15 seconds, or press the EXIT button to exit.
(❿) button to select it.
FAQs:
Will selecting a language change the audio, or only the on-screen menus?
Selecting a language will only change the on-screen menus.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.
NOTE: After pressing the MENU button, press the Navigation button within 15 seconds, otherwise the TV will revert to
normal viewing.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK SETTING
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
COLOR
39
72
60
62
+24
OFF
OFF TIMER
ON TIMER
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
CLOCK SET
BLUE BACK
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
1
1
1
2
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until TIMER is
MENU button ❷; the MENU screen will appear.
selected, then scroll down using the Navigation (❷) button
❷ and select CLOCK SET.
3
4
CLOCK SET
TIMER
AM12:00
2
MENU
EXIT
MENU BAR
QUIT
1
1
When CLOCK SET is in red, press the Navigation (❿)
button to select it.
Using the Navigation (➛) and (❿) buttons ❶, set the
correct time and AM/PM. Press and hold either button and
the time will increase/decrease in 10 minute increments.
Wait 15 seconds, or press the EXIT button ❷ to exit.
FAQs:
I set the clock previously, but now it is not set, why?
If there is a power outage, or if your unit was unplugged, you may have to reset the time. Simply repeat the steps above.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.
NOTE: After pressing the MENU button, press the Navigation button within 15 seconds, otherwise the TV will revert to
normal viewing.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE TV/CATV BUTTON
1
OPTIONS
TV: If using a VHF/UHF antenna.
CATV: If using Cable TV.
Simply press the TV/CATV button to set the TV to TV or CATV (Cable TV) mode. To change the type of cable (STD, HRC,
IRC), simply change the TV/CATV option under the TUNING menu.
SETTING THE CHANNELS INTO MEMORY
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
1
2
1
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ADD
UP
FINE
-1
AUTO MEMORY
3
2
MENU
EXIT
MENU BAR
QUIT
1
1
2
Press the POWER button ❶ to turn on the TV. Set the
TV/CATV button ❷ to TV or CATV (see above). Antenna,
cable, satellite, etc. must be connected before memorizing
channels. Press the MENU button ❸; the MENU screen will
appear.
Press the Navigation (➛) or (❿) button ❶ until TUNING is
selected, then scroll down using the Navigation (❷) button
❷ and select AUTO MEMORY.
NOTE: You cannot access TUNING menu if in VIDEO1, 2
or 3 - see FAQ’s below.
3
4
AUTO MEMORY
TUNING
CATV 23
AUTO MEMORY
STOP
Press the Navigation (➛) button to stop Auto Memory while
it is searching (if desired).
When AUTO MEMORY is in red, press the Navigation (❿)
button to start the Auto Search. The TV will automatically
cycle through all the channels and store active channels
into memory. When completed, the TV will be on the first
available channel.
FAQs:
Why can’t I access TUNING?
You cannot access the TUNING option if you are in VIDEO1, VIDEO2, or VIDEO3, there is no need to.
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or
local area provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL Up + or Down – button?
Yes, the channels must be programmed into memory.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDING AND DELETING CHANNELS
After setting channels into memory, you can add or delete channels as follows:
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ADD
UP
COLOR
39
72
60
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
FINE
-1
AUTO MEMORY
BLUE BACK
MENU
EXIT
MENU BAR
QUIT
MENU
EXIT
MENU BAR
QUIT
1
1
2
1
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until TUNING is
MENU button ❷; the MENU screen will appear.
selected, then scroll down using the Navigation (❷) button
❷ and select CHANNEL.
TO ADD A CHANNEL
3a
4a
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ERASE
UP
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ADD
UP
FINE
-1
FINE
-1
AUTO MEMORY
AUTO MEMORY
1
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
2
When a channel is selected and ERASE appears next to
the ADD/ERASE option, press the Navigation (❿) button ❷
to add the channel. Press the EXIT button ❶ to exit the
Tuning screen.
Press the Navigation (➛) or (❿) button to select a channel
to be added. If a channel is already memorized, “ADD” will
appear next to the ADD/ERASE option. If a channel is not
memorized, “ERASE” will appear.
TO DELETE A CHANNEL
3b
4b
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ADD
UP
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ERASE
UP
FINE
-1
FINE
-1
AUTO MEMORY
AUTO MEMORY
1
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
2
When a channel is selected and ADD appears next to
ADD/ERASE option, press the Navigation (❿) button ❷ to
erase the channel. Press the EXIT button ❶ to exit the
Tuning screen.
Press the Navigation (➛) or (❿) button to select a channel
to be added. If a channel is already memorized, “ADD” will
appear next to the ADD/ERASE option. If a channel is not
memorized, “ERASE” will appear.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING MENU
There are 2 more options in the TUNING menu described below:
1
2
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
COLOR
39
72
60
62
+24
OFF
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
56
STD
ERASE
UP
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
FINE
-1
BLUE BACK
AUTO MEMORY
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
1
1
2
1
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until TUNING is
MENU button ❷; the MENU screen will appear.
selected, then scroll down using the Navigation (❷) button
❷ and select MANUAL or FINE.
3
4
FINE:
MANUAL:
Press the Navigation (➛) or (❿) button while FINE is
selected to adjust the Fine Tuning of the selected channel.
Press the Navigation (➛) or (❿) button while MANUAL is
selected, the unit will then automatically go up one channel
and automatically adjust the fine tuning.
5
Press the EXIT button to exit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
OPTIONS
1
2
TV:
If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
Simply press the TV/CATV button to set the TV to TV or CATV (Cable TV) mode.
To change the type of cable (STD, HRC, IRC), simply change the TV/CATV
option under the TUNING menu.
Press the POWER button to turn on
the TV.
3
4
1
1
2
3
Adjust the volume level by pressing the VOLUME + or –
button. The volume level will be indicated on the screen by
green bars. As the volume level increases/decreases, so
do the number of bars.
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 20.
Press and release the CHANNEL + or – ❶ button. The TV
automatically stops at the next channel set into memory.
This will not operate if channels are not set into memory.
Direct Program Selection buttons (0 - 9, 100+)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press “0”, then 1-9 ❷ as
desired.
• For Channels 10 through 99, press the 2 digits in order.
• For Channels 100 through 125, press the -/-- button ❸,
then the remaining 2 digits.
NOTES:
•
When TV/CATV is set to TV, only channels up to 69
can be selected. When set to CATV, channels up to
125 can be selected.
•
•
The -/-- button is only used with CABLE.
If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
TV/CATV must be set to CATV when using cable, see step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION (CONTINUED)
MUTE
SLEEP
1
1
2
1
2
1
To set the TV to turn off after a preset amount of time, press the
SLEEP button on the remote, “SLEEP:OFF” will appear on the
screen. Each additional press will decrease the Sleep time by 10
minutes, from 120 minutes to 90 minutes. To confirm remaining
sleep time, press the SLEEP button; the remaining time will briefly
appear on the screen. To cancel the sleep time, press SLEEP
button repeatedly until “SLEEP: OFF” appears on the screen.
Press the MUTE button ❶ to turn off the sound. The TV’s
sound will be silenced and “MUTE” will appear on the
screen. The sound can be turned back on by pressing this
button again or one of the VOLUME + or – buttons ❷.
RECALL
1
2
1
1
Press the RECALL button once, the channel being viewed
and Stereo/Mono will appear.
Press the RECALL button again or wait 10 seconds and the
display text will disappear.
CHANNEL REVIEW (C.R.)
AV
1
1
1
1
Press the C.R. (Channel Review) button to go back to the
last channel selected. Press the C.R. button again to return
to the channel you were watching.
Press the AV button to cycle through the device(s)
connected to the INPUT jacks; the jack number will appear
on the screen. Repeatedly press to return to the antenna
connected to the VHF/UHF IN jack (Cable TV, etc.).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSED CAPTIONS
and Closed Captions in other languages are transmitted on
Captions 2.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired viewers or
it will translate and display text in another language.
TEXT: The Text Closed Caption Mode will usually fill the
screen with a programming schedule or other information.
CHANNEL: Select between the 4 closed caption channels.
After selecting a Closed Caption Mode, it will stay in effect
until it is changed, even if the channel is changed. If the
Captions signal is lost due to a commercial or a break in the
signal, the Captions will reappear when the signal is received
again. If the channels are changed, the Captions will be
delayed approximately 10 seconds.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact. The
Closed Captioned text will disappear during Cue (Fast
Forward Search), Review (Rewind Search) and Pause
modes or if the VCR tracking is not adjusted properly.
The Captions will appear in places on the screen where they
will least interfere with the picture, usually on the bottom of
the screen. News programs will usually show three-line
Closed Captions which scroll onto the screen. Most other
shows provide two or three lined Captions placed near the
character who is speaking so the viewer can follow the
dialogue.
TO VIEW CLOSED CAPTIONS
Enter the CUSTOM MENU and select CLOSED CAPTION.
Scroll down and select the desired settings:
DISPLAY: Turns the captions On or Off.
Words in italics or underlined describe titles, words in foreign
languages or words requiring emphasis. Words that are sung
usually appear enclosed by musical notes.
MODE: Select either C.C (Captions) or TEXT (Full screen
text) as follows:
CAPTIONS: This Closed Caption Mode will display text on
the screen in English or another language. Generally,
Closed Captions in English are transmitted on Captions 1
For television programs broadcasting with Closed Captions,
look in your TV guide for the Closed Captions symbol (CC).
NOTES:
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed
Captioning, especially with live programs. This is because during live programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with
Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Caption signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
CLOSED CAPTIONS
1
FAQs:
When I press the RECALL or MUTE button, the captions
do not appear, is this normal?
Yes, this is normal for this unit. Once the display
1
1
2
information disappears, the captions will continue.
I entered the Captions mode, but no captions are
appearing, why?
If no caption signal is received, no captions will appear, but
the television will remain in the Caption mode.
Press the MENU button ❶ to enter the CUSTOM MENU
and select CLOSED CAPTION. Scroll down and select the
desired settings as described above. Press the EXIT button
❷ when finished.
Why is there a big black box on the screen?
Because you are in a Captions mode. Turn the captions
off, or select a different Captions mode.
Closed Captioning will display text on the screen for the
hearing impaired.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN CONTROL ADJUSTMENTS (PICTURE)
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
COLOR
39
72
60
62
+24
OFF
COLOR
39
72
60
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
1
1
BLUE BACK
BLUE BACK
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
Press the PICTURE button.
Press the Navigation (ꢀ) or (❷) button to select the
desired picture setting (COLOR, BRIGHTNESS,
CONTRAST, SHARPNESS, TINT or BLUE BACK).
3
4
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
COLOR
39
72
70
62
+24
ON
COLOR
39
72
70
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BLUE BACK
BLUE BACK
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
If the Blue Back option is set to ON, when a station is
selected with no broadcast signal, a blue screen will appear.
Turn this option off if using a DVD player.
Adjust the setting using the Navigation (➛) and (❿)
buttons as desired.
5
FAQs:
Why is the picture very light, or not visible?
Brightness and/or Contrast settings are set too low.
Press the EXIT button to exit the PICTURE menu.
NOTE:
You cannot enter any of the other menus (LANGUAGE, TIMER, etc.) after pressing the PICTURE button. You must enter
the menu using the MENU button.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN CONTROL ADJUSTMENTS (SOUND)
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
BASS
+03
+01
OFF
TREBLE
EFFECT
BALANCE
BASS
TREBLE
EFFECT
+03
+01
CENT
OFF
BALANCE
CENT
1
1
MENU
EXIT
MENU BAR
QUIT
MENU
EXIT
MENU BAR
QUIT
Press the SOUND button.
Press the Navigation (ꢀ) or (❷) button to selected the
desired sound setting (BASS, TREBLE, EFFECT and
BALANCE).
3
4
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
BASS
TREBLE
EFFECT
+03
+02
OFF
BASS
+03
+02
HALL
CENT
TREBLE
EFFECT
BALANCE
BALANCE
CENT
MENU
MENU
EXIT
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
The EFFECT option will simulate a Surround Sound effect.
Choose between OFF, MOVIE or HALL.
Adjust the setting using the Navigation (➛) and (❿)
buttons as desired.
5
Press the EXIT button to exit the SOUND menu.
NOTE:
You cannot enter any of the other menus (LANGUAGE, TIMER, etc.) after pressing the SOUND button. You must enter
the menu using the MENU button.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL
Parental Control enables parents to prevent their children from watching inappropriate material on TV. Parental Control
reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System
signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, the
program will be blocked.
PARENTAL CONTROL SET-UP
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
1
2
COLOR
39
72
60
62
+24
OFF
CLOSED CAPTION
PARENTAL CONTROL
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BLUE BACK
MENU
EXIT
MENU
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
1
1
2
1
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until CUSTOM
MENU button ❷; the MENU screen will appear.
is selected, then scroll down using the Navigation (❷)
button ❷ and select PARENTAL CONTROL.
3
4
PARENTAL CONTROL
PARENTAL CONTROL
CUSTOM
CUSTOM
2
ENTER SECRET CODE
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
_
_
_
_
CANADIAN FRENCH RATING
CHANGE SECRET CODE
1
1
BLOCK
ON
QUIT
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
1
When PARENTAL CONTROL is in red, press the
Navigation (❿) button ❶ to select it.
Scroll down to BLOCK using the Navigation (❷) button.
When BLOCK is red, press the Navigation (❿) button to
turn it on or off.
Using the Direct Channel Selection buttons (0-9) ❷, enter
the password (“0000” is the preset password if you have
not changed it). This password can be changed to consist
of different numbers (i.e. 1467, 9732) after the original
password is entered.
FAQ”
How do I disable Parental Control?
If you turn the TV on for the first time, setting the Parental Control to ON alone will not enable the block unless you
change the preset rating for MPAA and TV.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
MPAA RATING SET-UP
1
2
PARENTAL CONTROL
ENTER SECRET CODE
CUSTOM
PARENTAL CONTROL
CUSTOM
MPAA RATING
_
_
_
_
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
CHANGE SECRET CODE
1
BLOCK
ON
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
Enter the PARENTAL BLOCK menu screen as described
on page 28.
Press the Navigation (❷) button and select MPAA RATING.
3
4
MPAA
RATING SYSTEM
MPAA
RATING SYSTEM
CUSTOM
CUSTOM
N/A
G
PG
PG-13
R
N/A
G
PG
PG-13
R
1
1
NC-17
X
NC-17
X
1
MENU
EXIT
MENU BAR
QUIT
MENU
2
EXIT
MENU BAR
QUIT
1
While MPAA RATING is selected, press the Navigation (❿)
button.
Using the Navigation (❷) or (ꢀ) button ❶, select the
desired rating, then press the Navigation (❿) button ❷.
See below.
N/A:
Movie rating is not R:
set.
All ages
Under 17 years old,
Parental Guidance
suggested.
G:
PG:
Parental Guidance. NC17: 17 years old and
5
PG-13: Parental Guidance,
less than 13 years X:
old.
above.
Adult only.
All programs with a higher rating than the one selected will
also be blocked. If you do not want to block any, set it to
N/A.
Press the EXIT button to exit.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
TV RATING SET-UP
1
2
PARENTAL CONTROL
MPAA RATING
PARENTAL CONTROL
CUSTOM
CUSTOM
ENTER SECRET CODE
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
CHANGE SECRET CODE
_
_
_
_
1
BLOCK
ON
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
Enter the PARENTAL BLOCK menu screen as described
on page 28.
Press the Navigation (❷) button and select TV PARENTAL
GUIDELINES.
3
4
U.S. TV
PARENTAL GUIDELINES
RATING SYSTEM
U.S. TV
PARENTAL GUIDELINES
RATING SYSTEM
CUSTOM
CUSTOM
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
CONTENT
MENU BAR
F
V
S
L
D
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
CONTENT
MENU BAR
F
V
S
L
D
1
1
1
1
MENU
EXIT
QUIT
MENU
2
EXIT
QUIT
While TV PARENTAL GUIDELINES is selected, press the
Navigation (❿) button.
Using the Navigation (❷) or (ꢀ) button ❶, select the
desired rating, then press the Navigation (❿) button ❷.
The letters/boxes next to the ratings represent the following:
FV:
D:
Fantasy Violence
Suggestive
S:
V:
Sexual Situations
Violence
Dialogue
L:
Adult Language
5
All programs with a higher rating than the one selected will
also be blocked. If you do not want to block any, set it to
NONE.
Press the EXIT button to exit.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
CANADIAN ENGLISH /FRENCH RATING SET-UP
This setting is used to receive data service for the Canadian English/French Language Rating System in accordance with
the EAI-744-A Standard.
1
2
PARENTAL CONTROL
MPAA RATING
PARENTAL CONTROL
ENTER SECRET CODE
CUSTOM
CUSTOM
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
CHANGE SECRET CODE
_
_
_
_
1
BLOCK
ON
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
Enter the PARENTAL BLOCK menu screen as described
on page 28.
Press the Navigation (❷) button and select CANADIAN
ENGLISH RATING or CANADIAN FRENCH RATING.
3
4
CANADIAN
ENGLISH LANGUAGE
RATING SYSTEM
CANADIAN
ENGLISH LANGUAGE
RATING SYSTEM
CUSTOM
CUSTOM
E
C
E
C
C8+
G
PG
14+
C8+
G
PG
14+
18+
1
1
1
18+
MENU
MENU
EXIT
2
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
1
While CANADIAN ENGLISH RATING or CANADIAN
FRENCH RATING is selected, press the Navigation (❿)
button.
Using the Navigation (❷) or (ꢀ) button ❶, select the
desired rating, then press the Navigation (❿) button ❷. All
programs with a higher rating than the one selected will
also be blocked.
5
Press the EXIT button to exit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
CHANGING THE PASSWORD
1
2
PARENTAL CONTROL
MPAA RATING
CUSTOM
PARENTAL CONTROL
ENTER SECRET CODE
CUSTOM
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
CHANGE SECRET CODE
_
_
_
_
1
BLOCK
ON
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
Enter the PARENTAL BLOCK menu screen as described
on page 28.
Press the Navigation (❷) button and select CHANGE
SECRET CODE. Preset code is set to “0000”.
3
4
MPAA
MPAA
CUSTOM
CUSTOM
RATING SYSTEM
RATING SYSTEM
NEW SECRET CODE
CONFIRM
-
-
-
-
-
-
-
-
NEW SECRET CODE
CONFIRM
X
X
X
X
X
-
X
-
1
MENU
MENU
EXIT
EXIT
MENU BAR
QUIT
MENU BAR
QUIT
While CHANGE SECRET CODE is selected, press the
Navigation (❿) button.
Using the Direct Channel Selection buttons, enter the new
secret code, and then confirm the new code again.
5
Press the EXIT button to exit.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE ON TIMER
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
1
2
OFF TIMER
ON TIMER
COLOR
39
72
60
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
CLOCK SET
BLUE BACK
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
1
1
2
1
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until TIMER is
MENU button ❷; the MENU screen will appear.
selected, then scroll down using the Navigation (❷) button
❷ and select ON TIMER.
3
4
ON TIMER
ON TIMER
TIMER
TIMER
AM 11:26
AM 11:26
PM 4:10
PM 5:25
CHANNEL
TV/CATV
OFF
ONCE
DAILY
9
TV
9
TV
CHANNEL
TV/CATV
OFF
ONCE
DAILY
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
When ON TIMER is in red, press the Navigation (❿) button
to select it.
Using the Navigation (➛) and (❿) buttons, set the desired
time you would like the TV to turn on (make sure to set the
correct AM/PM). Press and hold either button and the time
will increase/decrease in 10 minute increments.
5
6
ON TIMER
TIMER
AM 11:26
PM 5:25
9
TV
CHANNEL
TV/CATV
OFF
1
1
ONCE
DAILY
1
2
MENU
EXIT
MENU BAR
QUIT
1
1
2
1
Press the Navigation (❷) button ❷ and then the Navigation
(➛) and (❿) buttons ❶ to set the desired channel you
would like the TV to turn on to.
Press the Navigation (ꢀ) or (❷) button ❶ to select
between OFF (will turn On Timer off), ONCE (will set the
On Timer to turn on once), or DAILY (will set the On Timer
to turn on Daily.)
Press the EXIT button ❷ when finished. Press the POWER
button ❸ to turn off the unit.
When the On Timer time matches the actual time, the TV
will turn on.
Press the Navigation (❷) button ❷ and then the Navigation
(➛) and (❿) buttons ❶ to select TV or CATV.
FAQs:
Does the clock have to be set before using the On and Off Timers?
Yes, the clock must be set.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE OFF TIMER
1
2
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
1
2
OFF TIMER
ON TIMER
COLOR
39
72
60
62
+24
OFF
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
CLOCK SET
BLUE BACK
MENU
EXIT
MENU
MENU BAR
QUIT
EXIT
MENU BAR
QUIT
1
1
2
1
2
Press the POWER button ❶ to turn on the TV. Press the
Press the Navigation (➛) or (❿) button ❶ until TIMER is
MENU button ❷; the MENU screen will appear.
selected, then scroll down using the Navigation (❷) button
❷ and select OFF TIMER.
3
4
OFF TIMER
OFF TIMER
TIMER
TIMER
AM 11:26
AM 11:26
PM 4:10
PM 9:30
OFF
ONCE
DAILY
OFF
ONCE
DAILY
MENU
EXIT
MENU BAR
QUIT
MENU
EXIT
MENU BAR
QUIT
When OFF TIMER is in red, press the Navigation (❿)
button to select it.
Using the Navigation (➛) and (❿) buttons, set the desired
time you would like the TV to turn off (make sure to set the
correct AM/PM). Press and hold either button and the time
will increase/decrease in 10 minute increments.
5
6
OFF TIMER
TIMER
AM 11:26
PM 9:30
OFF
ONCE
DAILY
1
MENU
EXIT
MENU BAR
QUIT
Press the EXIT button when finished.
When the Off Timer time matches the actual time, the TV
will turn off.
Press the Navigation (ꢀ) or (❷) button to select between
OFF (will turn Off Timer off), ONCE (will set the Off Timer to
turn off once), or DAILY (will set the Off Timer to turn off
Daily.)
FAQs:
Does the clock have to be set before using the On and Off Timers?
Yes, the clock must be set.
When I press a button on the remote, the TV does not respond?
Refer to the FAQ’s on page 7. Make sure that you press the TV Function button to use the remote control to operate the TV.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Check the following before requesting service:
SYMPTOM
POWER
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power.
The AC power cord is not
connected.
Connect the AC power cord to
the AC outlet.
TV BROADCAST RECEPTION
TV station experiencing problems.
Try another channel.
Poor or no picture.
Picture control is not adjusted.
Possible local interference.
Check picture control adjustments.
Check for source of reception disturbance.
Antenna/CATV connector is not connected. Check CATV connection or VHF/UHF antenna.
TV station experiencing problems.
Try another channel.
Picture wobbles or drifts. Cable TV channel is scrambled.
Possible local interference.
A Cable box needs to be used (if desired).
Check for source of reception disturbance.
Check all CATV connections.
Set TV/CATV to CATV.
CATV connected or not connected.
No CATV reception.
TV/CATV set to TV.
Cable TV service interrupted.
Contact your Cable TV company.
Set TV/CATV to CATV.
No reception above ch13. TV/CATV set to TV.
TV station experiencing problems.
Try another channel.
MUTE button is pressed.
Possible local interference.
Press MUTE button again.
Poor or no sound.
Check for source of reception disturbance.
Antenna/CATV connector is not connected. Check CATV connection or VHF/UHF antenna.
Volume is set to minimum.
TV station stopped broadcasting.
Sleep Timer is set.
Increase volume.
Tune to a new channel.
Set Sleep Timer to Off.
TV shuts off.
Off Timer is set.
Set Off Timer to Off.
TV signal is weak.
Check CATV or VHF/UHF antenna connection.
Try another channel.
Closed Captioning not
working.
TV station experiencing problems or
program tuned is not closed captioned.
Closed Captioning not turned on.
Turn Closed Captioning on.
REMOTE CONTROL
The desired Function button (i.e.TV) is
not pressed.
Press the desired Function button. See Important
note on page 8.
Distance is too far or too much
light in the room.
Operate within 10 feet or reduce
the light in the room.
Remote control does
not operate.
There is an obstacle in the path of the beam Clear the path of the beam and/or aim the remote
or remote is not aimed at the sensor. at the sensor.
The batteries are weak or installed incorrectly. Replace the batteries or install correctly.
The remote code is not set properly or
the TV code was changed by accident.
Set the correct remote code. If the TV code was
changed, change it back to “0001”.
PARENTAL CONTROL (PC)
Parental Control setting is turned off.
Turn Parental Control setting on.
PC protection not
working properly.
News or sports event being broadcast.
Parental Control does not work with news or
sporting events.
Ratings not set.
Set ratings as desired.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEPTION DISTURBANCES
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.
Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the
disturbance may be caused by the local cable company broadcast.
IGNITION:
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electric drills and other electric appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or other
objects. Changing the direction or position of the antenna may improve the
reception.
SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small
dots. When the signal is extremely weak, it may be necessary to install an
external antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
This interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:
A slight picture size variation is quite normal when you adjust the
CONTRAST or BRIGHTNESS setting.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Picture Tube......................................................................................................................24" True Flat
Tuner Type.....................................................................................Quartz PLL Frequency Synthesized
Receiving Channels (VHF)...........................................................................................................2 ~ 13
Receiving Channels (UHF).........................................................................................................14 ~ 69
Receiving Channels (CATV)........................................................................................14 ~ 36 ( A)-(W)
37 ~ 59 (AA)-(WW)
60 ~ 85 (AAA)-(ZZZ)
86 ~ 94 (86)-(94)
95 ~ 99 (A-5)-(A-1)
100 ~ 125 ( 100)-(125)
01 (5A)
Antenna Input...........................................................................................VHF/UHF in 75 ohms coaxial
Speaker.......................................................................................................3" x 6" 8 ohms 10 W x 2
Audio Output............................................................................................................................5W + 5W
Power Source ................................................................................................................AC 120V 60 Hz
Power Consumption ...............................................................................................................120 Watts
Input/Output
Video In....................................................................................................................RCA 1Vp-p 75 ohm
Video Out.................................................................................................................RCA 1Vp-p 75 ohm
Audio In ...........................................................................................................RCA 300 mV/50 1K ohm
Audio Out .......................................................................................................RCA 300 mV/50 1K ohm
Unit Dimensions.......................................................................................................632 x499 x472 mm
Weight .......................................................................................................................................34.5 kgs
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the receiver may
be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. Mild
soap and a soft, damp cloth may be used.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO
RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL 33331
Printed in Hong Kong
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|