Tel70AZAR_5 3/28/07 10:09 AM Page 1
MEADE INSTRUCTION MANUAL
70mm | 2.8" Altazimuth Refracting Telescope
70AZ-AR
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 3
determines how much detail you will be
able to see in your telescope. The focal
length information will help later on to
calculate magnification.
INTRODUCTION
Your telescope is an excellent beginner’s
instrument, and is designed to observe
objects in the sky and also on land. It can be
your personal window on the universe or
allows you to intimately study the behavior of
nesting birds on a distant hillside.
1
Setting up your telescope involves these
simple steps:
• Assemble your tripod
• Attach the accessory tray
• Attach the optical tube to the mount
• Attach the red dot viewfinder
• Attach the diagonal mirror and
eyepiece
The telescope is shipped with the following
parts:
• Optical tube
• Aluminum tripod with an accessory tray
• Two 1.25" eyepieces: MA25mm (28X),
MA9mm (78X)
• Align the red dot viewfinder
• Diagonal mirror
• Red dot viewfinder with bracket
• Telescope mount
• Hardware used in the assembly:
3 bolts (2" long) with wing nuts and
washers
Study the the picture on the next page
and become acquainted with the parts
of your telescope. Then proceed to
“Assemble your Tripod.”
3 screws (1/2" long) with nuts
The tube has a focal length of 700mm, and
its objective lens has a diameter of 70mm.
The lens diameter is one of the most
important pieces of information about the
telescope. The size of the objective lens
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 4
Figure 1: Meade 70AZ-AR Altazimuth Refracting Telescope
Inset A
FIGURE 1
Inset A:
Inset B:
Inset C:
Accessory Tray Mounting Bolt Hole
Tripod Leg
Viewfinder Assembly
2
1. Eyepiece
2. Red dot viewfinder (see Inset C)
3. Red dot viewfinder alignment screws (see Inset C)
4. Optical tube assembly
5. Vertical lock knobs
6. Horizontal lock knob
7. Tripod legs
8. Leg brace supports
Inset B
9. Leg brace
10. Mount base attachment
11. Tripod attachment bolts and wing nuts
12. Accessory tray mounting bolt hole (see Inset A)
13. Diagonal mirror
14. Objective lens cell
15. Focuser drawtube and thumbscrews
16. Altitude rod slow motion fine adjustment control
17. Altitude rod
Inset C
18. Altazimuth mount
19. Adjustable sliding center leg extension
(see Inset B)
20. Tripod leg lock thumbscrew (see Inset B)
21. Dew shield/lens shade
22. Front lens cap
23. Focusing knob
24. Red dot viewfinder bracket (see Inset C)
25. Red dot viewfinder bracket mounting thumbscrews
(see Inset C)
26. Accessory tray
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 5
Fig. 2
5. Repeat with the two other
leg braces.
6. Thread the accessory tray (26)
over the center mounting bolt to
a firm feel.
ASSEMBLE YOUR TRIPOD
mount
The tripod is the basic support for your
telescope. Its height may be adjusted so that
you can view comfortably.
Note: Number in brackets, e.g., (3), refer
to Fig. 1.
1. Make sure that as you attach the legs (7)
to the mount that the leg braces (9) are
facing inward.
2. Line up the holes at the top of one of the
legs with the holes in the mount (10).
See Fig. 2.
3. Thread one of the 2-inch bolts through
the holes.
4. Thread a wingnut over the bolt and hand-
tighten to a firm feel.
5. Attach the remaining two legs to the
mount in the same manner.
3
ATTACH THE OPTICAL TUBE TO THE MOUNT
2” Screw
The optical tube gathers distant light which
is focused in the eyepiece.
1. Remove the two lock knobs (5) from the
optical tube mount.
2. Slide the altitude rod (17) into the hole in
the altitude adjustment control . Tighten
to a firm feel. See Fig. 4.
3. Place the optical tube (4) between the
forks of the mount, oriented as shown
in Fig. 4.
tripod
leg
washer
wingnut
thumbscrew to relock the leg lock.
d. Repeat for the other two legs.
ATTACH THE ACCESSORY TRAY
The tray helps stabilize the tripod and is also
a convenient holder of eyepieces and other
Meade accessories, such as the Barlow lens.
1. Line up the holes at the end of one of the
leg brace supports (8) with the holes in
one of the leg braces (9).
2. Thread one of the one-half inch bolts
through the holes.
3. Thread a hex nut over the end of the bolt.
4. Finger tighten the bolt and hex nut.
See Fig. 3.
Fig. 3
6. Spread the legs out evenly apart.
7. Set the height of your tripod:
a. Rotate and loosen the leg lock
thumbscrew (20) to unlock the leg lock.
b. Slide the inner portion of the leg (19) in
or out to the desired length. Repeat for
the other two legs.
finger tighten the
hex nut
c. Rotate and tighten the leg lock
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 6
2. Line up the two holes on the red dot
viewfinder bracket over the two bolts.
Slide the bracket over the bolts. See Fig.
1, inset C.
3. Replace the thumbscrews onto the bolts
and tighten to a firm feel.
through the eyepiece in the diagonal
mirror and turn the focuser knob (23)
until the image is sharply focused. Center
the object precisely in the eyepiece’s field
of view.
4. Thread a lock knob (5) through each
of the holes in the forks of the mount
4
and tighten to a firm feel.
ATTACH THE RED DOT VIEWFINDER
2. Look through the red dot viewfinder. Turn
one or more of the viewfinder’s alignment
screws (3) until the red dot is precisely
over the same object as you centered in
the eyepiece.
An eyepiece (1) has a narrow field of view. A
viewfinder (2) has a wider field of view, which
makes it easier to locate objects. The red dot
viewfinder has a red dot to make it easier to
line up more precisely with a target.
ATTACH THE DIAGONAL MIRROR AND
EYEPIECE
The diagonal mirror reflects the light from
the optical tube to a more comfortable
viewing position.
1. Slide the diagonal mirror (13) into the
focuser drawtube (15).
2. Tighten the drawtube thumbscrew to hold
the diagonal mirror securely.
3. Check this alignment at night on a
celestial object, such as the Moon or
a bright star, and use the viewfinder’s
alignment screws to make any
1. Note the two thumbscrews (25) threaded
onto two bolts on the optical tube. Remove
the thumbscrews from the tube.
Fig. 4
necessary refinements.
place tube between
forks
3. Slide the MA 25mm eyepiece (1) into
diagonal mirror.
4. Tighten the diagonal mirror thumbscrew
to hold the eyepiece securely.
lock
knob
lock
knob
slide rod
through
hole
ALIGN THE RED DOT VIEWFINDER
Perform the first part of this procedure
during the daytime and the last step at night.
1. Point the telescope at an easy-to-find
land object such as the top of a telephone
pole or a distant mountain or tower. Look
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 7
SUN WARNING
NEVER USE YOUR TELESCOPE
TO LOOK AT THE SUN!
You will enjoy your telescope even more
as you learn more about it. But don’t be
scared off by difficult terms or
complicated procedures. Don’t panic!
Just relax and enjoy your scope.
TO MOVE THE TELESCOPE
Your telescope is altazimuth mounted.
Altazimuth is just a complicated way of
saying that your telescope moves up
and down and from side to side. Other
telescopes may be mounted in
different ways.
5
LOOKING AT OR NEAR THE SUN WILL CAUSE
INSTANT AND IRREVERSIBLE DAMAGE TO YOUR
EYE. EYE DAMAGE IS OFTEN PAINLESS, SO THERE IS
NO WARNING TO THE OBSERVER THAT DAMAGE
HAS OCCURRED UNTIL IT IS TOO LATE. DO NOT
POINT THE TELESCOPE OR ITS VIEWFINDER AT OR
NEAR THE SUN. DO NOT LOOK THROUGH THE
TELESCOPE OR ITS VIEWFINDER AS IT IS MOVING.
CHILDREN SHOULD ALWAYS HAVE ADULT
You will begin to grow and learn more about
astronomy the more you observe. Go to
the library and read some books about the
stars and planets. Read about astronomers
of old. Many of them had telescope no bigger
than the one you are using right now.
Galileo, who is one of the first astronomers
to use a telescope, discovered four of the
moons of Jupiter with a telescope about the
same size as yours (and his didn’t even focus
very well!).
1. Slightly loosen one of the star-shaped
altitude control knobs (5). Loosening this
knob allows you to move the telescope up
and down.
SUPERVISION WHILE OBSERVING.
2. Slightly loosen the horizontal lock
knob (6). Loosening this lock allows
the telescope to be moved from side
to side.
THE MOST IMPORTANT RULE
We have one very important rule that
you should always follow when using
your telescope:
3. Once an object is found, re-tighten the
control knobs. You can then use the slow
motion control (16) to make smooth and
precise movements as you can follow
(or “track”) an object as it moves in
the eyepiece.
THE MEADE 4M COMMUNITY
You haven’t just bought a telescope, you have embarked
on an astronomy adventure that never ends. Share the
journey with others by accepting your free membership
in the 4M community of astronomers.
Have Fun!
Have a good time when you’re observing. You
may not know everything that there is to know
about a telescope or what all the sights in the
universe are, but that’s OK. Just point and
observe at first.
today.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 8
the object lined up in the viewfinder, look
through the optical tube’s eyepiece. If you
have aligned your viewfinder, you will see
the object in your eyepiece.
most obvious features are craters. In fact
you can see craters within craters. Some
craters have bright lines about them. These
are called rays and are the result of material
thrown out of the crater when it was struck
by a colliding object. The dark areas on the
Moon are called maria and are composed of
lava from the period when the Moon still had
volcanic activity. You can also see mountain
ranges and fault lines on teh Moon.
OBSERVING
Observe during the daytime: Try out
your telescope during the daytime at
first. It is easier to learn how it operates
and how to observe when it is light.
6
Focus: Look through the eyepiece and
practice focusing on the object you have
chosen.
Pick out an easy object to observe: A distant
mountain, a large tree, a lighthouse or
skyscraper make excellent targets. Point
the optical tube so it lines up with your
object.
Try out the coarse and fine adjustment
controls: Practice using the fine adjustment
control (16 to move the telescope. These
can come in very handy, especially when you
wish to move the telescope in very small
(fine control) steps.
Use a neutral density filter (often called a
“moon filter”) when observing the Moon.
Neutral density filters are available from
Unlock the lock knobs: To move the
telescope, you will need to unlock the
horizontal (6) and vertical (5) lock knobs (just
rotate to unlock or lock; when locking, only
tighten to a “firm feel,” do not overtighten).
TOO MUCH POWER?
Observe the Moon: When you feel
comfortable with the viewfinder, the
eyepieces, the locks and the adjustment
controls, you will be ready to try out the
telescope at night. The Moon is the best
object to observe the first time you go out at
night. Pick a night when the Moon is a
crescent. No shadows are seen during a full
Moon, making it appear flat and
Use the red dot viewfinder: If you have not
done so, align the red dot viewfinder (2) with
the telescope’s eyepiece (1) as described
earlier. Look through the red dot viewfinder
until you can see the object. It will be easier
to locate an object using the red dot
viewfinder rather than locating with the
eyepiece. Line up the object using the
viewfinders red dot.
Can you ever have too much power? If the type of
power you’re referring to is eyepiece magnification,
yes you can! The most common mistake of the
beginning observer is to “overpower” a telescope by
using high magnifications which the telescope’s
aperture and atmospheric conditions cannot
reasonably support. Keep in mind that a smaller,
but bright and well-resolved image is far superior
to one that is larger, but dim and poorly resolved.
Powers above 400x should be employed only under
the steadiest atmospheric conditions.
uninteresting.
Look for different features on the Moon. The
Look through the eyepiece: Once you have
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 9
Meade as an optional accessory and
and are called the inner planets. Mercury,
Venus, Earth and Mars comprise the inner
planets. Venus and Mars can be easily seen
in your telescope.
the more details you will be able to see.
enhance contrast to improve your
7
observation of lunar features. Spend several
nights observing the Moon. Some nights, the
Moon is so bright that it makes other objects
in the sky difficult to see. These are nights
that are excellent for lunar observation.
One of the most fascinating sights of
Jupiter are its moons. The four largest
moons are called the Galilean moons, after
the astronomer Galileo, who observed them
for the first time. If you’ve never watched the
Galilean moons in your telescope before,
you’re missing a real treat! Each night, the
moons appear in different positions around
the Jovian sky. This is sometimes called the
Galilean dance. On any given night, you
might be able to see the shadow of a moon
on the face of Jupiter, see one moon eclipse
another or even see a moon emerge from
Venus is seen before dawn or after sunset,
because it is close to the Sun. You can
observe Venus going through crescent
phases. But you cannot see any surface
detail on Venus because it has a very thick
atmosphere of gas.
Observe the Solar System: After observing
the Moon, you are ready to step up to the
next level of observation, the planets.
There are four planets that you can easily
observe in your telescope: Venus, Mars,
Jupiter and Saturn.
When Mars is close to the Earth, you can see
some details on Mars, and sometimes even
Mars’ polar caps. But quite often, Mars is
further away and just appears as a red dot
with some dark lines crisscrossing it.
Nine planets (maybe more!) travel in a fairly
circular pattern around our Sun. Any system
of planets orbiting one or more stars is
called a solar system. Our Sun, by the way,
is a single, yellow dwarf star. It is average as
far as stars go and is a middle aged star.
Beyond the planets are clouds of comets, icy
planetoids and other debris left over from
the birth of our sun. Recently astronomers
have found large objects in this area and
they may increase the number of planets in
our solar system.
Jupiter, Saturn, Uranus, Neptune and Pluto
comprise the outer planets. These planets,
except for Pluto, are made mostly of gases
and are sometimes called gas giants. If they
had grown much bigger, they may have
become stars. Pluto is made mostly of ice.
Jupiter is quite interesting to observe. You
can see bands across the face of Jupiter. The
more time you spend observing these bands,
The four planets closest to the Sun are rocky
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 10
Fig. 5
behind Jupiter’s giant disk. Drawing the
positions of the moons each night is an
may not see many features on the surface of
Saturn, its ring structure will steal your
breath away. You will probably be able to see
a black opening in the rings, known as the
Cassini band.
excellent exercise for novice
8
astronomers.
Any small telescope can see the four
Galilean moons of Jupiter (Fig. 5), plus a few
others, but how many moons does Jupiter
actually have? No one knows for sure! Nor
are we sure how many Saturn has either. At
last count, Jupiter had over 60 moons, and
held a small lead over Saturn. Most of these
moons are very small and can only be seen
with very large telescopes.
Saturn is not the only planet that has rings,
but it is the only set of rings that can be
seen with a small telescope. Jupiter’s rings
cannot be seen from Earth at all—the
Voyager spacecraft discovered the ring after
it passed Jupiter and looked back at it. It
turns out, only with the sunlight shining
through them, can the rings be seen. Uranus
and Neptune also have faint rings.
are just pinpoints of light and aren’t very
interesting. But look again. There is much
information that is revealed in stars.
The first thing you will notice is that not all
stars are the same colors. See if you can find
blue, orange, yellow, white and red stars.
The color of stars sometimes can tell you
about the age of a star and the temperature
that they burn at.
Probably the most memorable sight you will
see in your telescope is Saturn. Although you
Optional color filters help bring out detail
and contrast of the planets. Meade offers a
line of inexpensive color filters.
What’s Next? Beyond the Solar System:
Once you have observed our own system of
planets, it’s time to really travel far from
home and look at stars and other objects.
Other stars to look for are multiple stars.
Very often, you can find double (or binary)
stars, stars that are very close together.
These stars orbit each other. What do you
notice about these stars? Are they
You can observe thousands of stars with
your telescope. At first, you may think stars
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 11
different colors? Does one seem brighter
than the other?
being born. Some nebulas are the remains
of stars exploding. These explosions are
called supernovas.
crater system on the moon or even a
nebula.
9
Almost all the stars you can see in the sky
are part of our galaxy. A galaxy is a large
grouping of stars, containing millions or
even billions of stars. Some galaxies form a
spiral (like our galaxy, the Milky Way) and
other galaxies look more like a large football
and are called elliptical galaxies. There are
many galaxies that are irregularly shaped
and are thought to have been pulled apart
because they passed too close to—or even
through—a larger galaxy.
Go your library or check out the
When you become an advanced observer you
can look for other types of objects such as
asteroids, planetary nebula and globular
clusters. And if you’re lucky, every so often a
bright comet appears in the sky, presenting
an unforgettable sight.
internet for more information about
astronomy. Learn about the basics: light
years, orbits, star colors, how stars and
planets are formed, red shift, the big bang,
what are the different kinds of nebula, what
are comets, asteroids and meteors and what
is a black hole. The more you learn about
astronomy, the more fun, and the more
rewarding your telescope will become.
SOME OBSERVING TIPS
The more you learn about objects in the
sky, the more you will learn to appreciate
the sights you see in your telescope. Start
a notebook and write down the observations
you make each night. Note the time and
the date.
Eyepieces: Always begin your observations
You may be able to see the Andromeda
galaxy and several others in your telescope.
They will appear as small, fuzzy clouds. Only
very large telescope will reveal spiral or
elliptical details.
SURF THE WEB
Use a compass to make a circle, or trace
around the lid of a jar. Draw what you see in
your eyepiece inside the circle. The best
exercise for drawing is to observe the moons
of Jupiter every night or so. Try to make
Jupiter and the moons approximately the
same size as they look in your eyepiece. You
will see that the moons are in a different
position every night. As you get better at
drawing, try more challenging sights, like a
•
•
•
•
•
•
The Meade 4M Community:
Sky & Telescope:
Astronomy:
You will also be able to see some nebulas
with your scope. Nebula means cloud. Most
nebulas are clouds of gas. The two easiest to
see in the Northern Hemisphere are the
Orion nebula during the winter and the
Triffid nebula during the summer. These are
large clouds of gas in which new stars are
Astronomy Picture of the Day:
Photographic Atlas of the Moon:
Hubble Space Telescope Public Pictures:
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 12
Fig. 6
using the 25mm low-power eyepiece.
The 25mm eyepiece delivers a bright,
objects centered in the field, simply move
the telescope on one or both of its axes—
vertically and/or horizontally as needed—try
using the telescopes coarse and fine
adjustment controls. At higher powers,
astronomical objects will seem to move
through the field of view of the eyepiece
more rapidly.
eyepiece
barlow
10
wide field of view and is the best to use
for most viewing conditions. Use the
high-power 9mm eyepiece to view details
when observing the Moon and planets. If the
image become fuzzy, switch back down to a
lower power. Changing eyepieces changes
the power or magnification of your
telescope.
Place the object to be viewed at the edge
of the field and, without touching the
telescope, watch it drift through the field to
the other side before repositioning the
diagonal
mirror
By the way, you might have noticed
something strange when you looked through
your eyepiece. Although the image is right-
side up, it is reversed. That means reading
words can be a problem. But it has no affect
on astronomical objects. If you wish to have
a fully corrected image, check out Meade’s
optional Erecting Prism in the Optional
Accessory section.
Meade offers a complete line of eyepieces
for your telescope. Most astronomers have
four or five low-power and high power
eyepieces to view different objects and to
cope with different viewing conditions.
STAR CHARTS
Star charts and planispheres are useful for a variety of
reasons. In particular, they are a great aid in planning a
night of celestial viewing.
A wide variety of star charts are available in books, in
magazines, on the internet and on CD Roms. Meade
Objects move in the eyepiece: If you are
observing an astronomical object (the Moon,
a planet, star, etc.) you will notice that the
object will begin to move slowly through the
telescopic field of view. This movement is
caused by the rotation of the Earth and
makes an object move through the tele-
scope’s field of view. To keep astronomical
TM
offers AutoStar Suite software. Contact your local
Meade dealer or Meade’s Customer Service department
for more information.
Optional Accessory
Astronomy and Sky and Telescope magazines print star
charts each month for up-to-the-minute maps of the
heavens.
Barlow lens: You can also change
magnification by using a Barlow lens. The
Barlow lens doubles the power of your
telescope. See Fig. 6.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 13
telescope so that the object to be viewed is
again placed at the edge of the field, ready to
be further observed.
to temperature differences between inside
and outside air. Also, it is a good idea to
allow your telescope to reach the ambient
(surrounding) outside temperature before
starting an observing session.
animals, such as skunks, snakes, etc.,
may appear? Are there viewing
obstructions such as tall trees, street
lights, headlights and so forth? The
best locations are dark locations, the darker
the better. Deep space objects are easiest to
see under dark skies. But it is still possible
to observe even in a city.
11
Vibrations: Avoid touching the eyepiece
while observing through the telescope.
Vibrations resulting from such contact will
cause the image to move. Avoid observing
sites where vibrations cause image
movement (for example, near railroad
tracks). Viewing from the upper floors of a
building may also cause image movement.
When to observe: Planets and other
objects viewed low on the horizon often lack
sharp-ness—the same object, when
observed higher in the sky, will appear
sharper and have greater contrast. Try
reducing power (change your eyepiece) if
your image is fuzzy or shimmers. Keep in
mind that a bright, clear, but smaller image
is more interesting than a larger, dimmer,
fuzzy one. Using too high a power eyepiece
is one of the most common mistakes made
by new astronomers.
Surf the Web and visit your local library:
The internet contains a huge amount of
astronomical information, both for children
and adults. Check out astronomy books from
your library. Look for star charts—these are
Let your eyes “dark-adapt:” Allow five or
ten minutes for your eyes to become “dark
adapted” before observing. Use a red-
filtered flashlight to protect your night vision
when reading star maps, or inspecting the
telescope. Do not use use a regular flash-
light or turn on other lights when observing
with a group of other astronomers. You can
make your own red filtered flashlight by
taping red cellophane over a flashlight lens.
available on a monthly
basis in
ASTRONOMY RESOURCES
•
•
The Meade 4M Community
6001 Oak Canyon, Irvine, CA 92618
Astronomical League
Dress Warm: Even on summer nights, the
air can feel cool or cold as the night wears
on. It is important to dress warm or to have
a sweater, jacket, gloves, etc., nearby.
Executive Secretary
5675 Real del Norte, Las Cruces, NM 88012
The Astronomical Society of the Pacific
390 Ashton Ave., San Francisco, CA 94112
The Planetary Society
65 North Catalina Ave, Pasadena, CA 91106
International Dark-Sky Association, Inc.
3225 N. First Avenue, Tucson, AZ 85719-2103
•
•
•
Viewing through windows: Avoid setting up
the telescope inside a room and observing
through an opened or closed window pane.
Images may appear blurred or distorted due
Know your observing site: If possible, know
the location where you will be observing. Pay
attention to holes in the ground and other
obstacles. Is it a location where wild
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 14
Astronomy and Sky and Telescope
magazines.
measurement of the length of the optical
tube. In other words, this is the distance
light travels in the telescope before being
brought to focus in you eyepiece. Your tube
is 700mm long.
or “alt”), and side to side, (azimuth or “az”).
Other mounting configurations are
available for other telescopes, such as
equatorial mounting.
12
HAVE A GOOD TIME,
ASTRONOMY IS FUN!
SPECIFICATIONS
USE THE SPECIFICATIONS TO CALCULATE
THE MAGNIFICATION OF YOUR EYEPIECE
Objective lens diameter is how big the
lens is on your scope. Telescopes are
always described by how large their
objective lens is. Your telescope is 70mm
or 2.8 inches. Other telescopes are 90mm,
8 inches, 16 inches, or even 3 feet in
diameter. The Hubble Telescope’s objective
lens has a diameter of 2.4 meters (that’s
7.8 feet across!).
The power of a telescope is how much it
magnifies objects. Your 25mm eyepiece
magnifies an object 28 times. Your 9mm
eyepiece magnifies objects 78 times.
Optical tube focal length 700mm
Objective lens diameter
70mm(2.8")
Focal ratio. . . . . . . . . . . . . . f/10
Mounting type. . . . . . . . . . . Altazimuth
What do the specifications mean?
Optical tube focal length is simply a
But if you obtain other eyepieces, you can
calculate how much magnification they have
with your telescope. Just divide the focal
length of the telescope by the focal length of
the eyepiece.
The focal ratio helps determine how fast the
photographic speed of a telescope is. The
lower the focal ratio number, the faster the
exposure. f/5 is faster than f/10. The faster
the ratio, the faster exposure time is needed
when a camera is hooked up to the
telescope. Your telescope has slower focal
ratio at f/10. Sometimes, astronomers use
focal reducers to make slow exposure
telescopes have faster focal ratios.
Focal Length of the Telescope
÷
Focal Length of the Eyepiece
=
Magnification
Look at the specifications. You will see that
the focal length of your scope is 700mm.
Altaz mounting simply means your
telescope moves up and down (altitude
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 15
Let’s say that you have obtained a 13mm
eyepiece. You can tell that what the focal
length of your eyepiece is as it is always
printed on the side of an eyepiece. Divide:
700 ÷ 13, which equals 53.8. Round this off
to the nearest whole number and your new
eyepiece magnifies objects 54 times.
interesting than a larger, dimmer, fuzzy one.
Using too high a power eyepiece is one of
the most common mistakes made by new
astronomers. So don’t think that higher
magnification is necessarily better—quite
often the best view is with lower
of 3 parts distilled water to 1 part
isopropyl alcohol. You may also add
1 drop of biodegradable dishwashing
soap per pint of solution. Use soft,
white facial tissues and make short,
gentle strokes. Change tissues often.
13
magnification value!
CAUTION: Do not use scented or lotioned
tissues or damage could result to the
optics. DO NOT use a commercial
photographic lens cleaner.
A great optional accessory is a Barlow lens
If you use a Barlow lens with one of your
eyepieces, it doubles the magnification
of your eyepiece. Other types of Barlows
can triple or further increase the power
of an eyepiece. To find out how much the
magnification is when you use a Barlow,
multiply your eyepiece’s magnification
by two.
TAKING CARE OF YOUR TELESCOPE
Your telescope is a precision optical
instrument designed for a lifetime of
rewarding viewing. It will rarely, if ever,
require factory servicing or maintenance.
Follow these guidelines to keep your
telescope in the best condition:
OPTIONAL ACCESSORIES
#928 45° Erecting Prism (1.25 O.D.):
Correctly orients the telescopic image
JOIN AN ASTRONOMY CLUB, ATTEND A STAR PARTY
• Avoid cleaning the telescope’s lenses. A
little dust on the front surface of the
telescope’s correcting lens will not cause
loss of image quality.
One of the best ways to increase your knowledge of
astronomy is to join an astronomy club. Check your
local newspaper, school, library, or telescope dealer/
store to find out if there’s a club in your area.
Eyepiece’s magnification x 2
=
Magnification with a 2X Barlow lens
• When absolutely necessary, dust on the
front lens should be removed with very
gentle strokes of a camel hair brush or
blown off with an ear syringe (available at
most pharmacies).
Many groups also hold regularly scheduled Star
Parties at which you can check out and observe with
many different telescopes and other pieces of
astronomical equipment. Magazines such as Sky and
Telescope and Astronomy print schedules for many
popular Star Parties around the United States and
Canada.
Your 25mm low-power eyepiece magnifies
an object 28 times. Multiply 28 by 2 and you
get 56 times magnification with a Barlow.
It’s worth repeating: Keep in mind that a
bright, clear, but smaller image is more
• Fingerprints and organic materials on the
front lens may be removed with a solution
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 16
during terrestrial observing #126
Barlow lens (1.25 0.0.) doubles the
14
magnification of any eyepiece.
Additional Eyepieces (1.25" barrel
diameter): For higher or lower
magnifications with the telescopes that
accommodate 1.25" eyepieces, Meade Series
4000 Super Plössl eyepieces, available in a
wide variety of sizes, provide a high level of
image resolution and color correction at an
economical price. Contact your Meade
Dealer or see the Meade catalog for more
information. Visit us on the web at
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 17
provided the defective part is returned to
Meade, freight-prepaid, with proof of
purchase. This warranty applies to the
original purchaser only and is non-
transferable. Meade products purchased
outside North America are not included in
this warranty, but are covered under
separate warranties issued by Meade
international distributors.
breach of this warranty. Any implied
warranties which cannot be disclaimed
are hereby limited to a term of one year
from the date of original retail
purchase.
MEADE CONSUMER SOLUTIONS
If you have a question concerning your
telescope, call Meade Instruments
Consumer Solutions Department at
(800) 626-3233. Consumer Solutions
Departmant hours are 8:00AM to 5:00PM,
Pacific Time, Monday through Friday. Write
or call the Meade Consumer Solutions
Department first, before returning the
telescope to the factory, giving full
particulars as to the nature of the problem,
as well as your name, address, and daytime
telephone number. The great majority of
servicing issues can be resolved by
telephone, avoiding return of the telescope
to the factory.
15
This warranty gives you specific rights. You
may have other rights which vary from state
to state.
Meade reserves the right to change product
specifications or to discontinue products
without notice.
RGA Number Required: Prior to the return
of any product or part, a Return Goods
Authorization (RGA) number must be
obtained from Meade by writing, or by
calling (800) 626-3233. Each returned part
or product must include a written statement
detailing the nature of the claimed defect,
as well as the owner’s name, address, and
phone number.
This warranty supersedes all previous
Meade product warranties.
MEADE LIMITED WARRANTY
Every Meade telescope and telescope
accessory is warranted by Meade
Instruments Corporation (“Meade”) to be
free of defects in materials and
workmanship for a period of ONE YEAR from
the date of original purchase in the U.S.A.
Meade will repair or replace a product, or
part thereof, found by Meade to be defective,
This warranty is not valid in cases where the
product has been abused or mishandled,
where unauthorized repairs have been
attempted or performed, or where
depreciation of the product is due to normal
wear-and-tear. Meade specifically disclaims
special, indirect, or consequential damages
or lost profit which may result from a
©2007 MEADE INSTRUMENTS CORPORATION
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 18
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel70AZAR_5 3/28/07 10:09 AM Page 20
Meade Instruments Corporation
6001 Oak Canyon, Irvine, California
1-800
92618
Download from Www.Somanuals.com. All Manuals Search And Download.
|