XT5888
15 INCH
COLOR MONITOR
USER'S
MANUAL
Features
• 0.28 mm Dot Pitch
• 1024 x 768, Non-Interlaced
• 90 Hz Refresh Rate (VGA/SVGA)
• PowerSavingOperation(VESADPMS)
• Non-Glare Screen
• Full Screen Display
• Low Radiation
Part#MAN074Rev. 1.0
M1588L
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - General Information
Congratulations on purchasing a MaxTech 15-inch Color Monitor. The
monitor has one of the finest CRTs available in the industry, providing a
full range of video display resolutions and complies with the MPR-I
standard to reduce electromagnetic emissions.
The monitor has a 0.28 mm dot pitch display with a 65 MHz video
bandwidth. It supports video resolutions ranging from 640 x 350 to 1024
x 768 (non-interlaced).
The monitor can be used with video cards supporting VGA, SVGA, IBM
8514/A or XGA modes and provides an unlimited palette of colors.
1.1 Precautions When Using the Monitor
When setting up and using your monitor, pay special attention to the
following:
• To eliminate eye fatigue, do not use your monitor against a bright
background or where sunlight or other light sources will shine directly
on the monitor.
• Your monitor should be placed just below eye level for optimum
viewing.
• Allow adequate ventilation around the monitor so that heat from the
monitor can properly dissipate.
• Neither the monitor itself nor any other heavy object should rest on the
power cord. Damage to a power cord can cause fire or electrical
shock.
• Keep the monitor away from high capacity transformers, electric
motors and other strong magnetic fields.
• Do not use your monitor in a damp, dusty or dirty area.
• Handle the monitor with care when transporting.
• Unplug the monitor during electrical storms.
1.2 Power Saving Modes
The MaxTech monitor supports VESA Display Power Management Sig-
naling (DPMS) SUSPEND and OFF modes. DPMS defines a method for
a computer to signal the monitor to reduce its power consumption when
idle. DPMS features must be supported by both the computer and the
monitor for them to be available. Computer support of DPMS requires the
use of a DPMS compliant video card.
The monitor enters DPMS SUSPEND mode when the computer turns off
the Vertical Synchronization signal. This power-saving mode reduces the
monitor’s power consumption to 30W. While in this mode the Power
Indicator LED is amber. When the synchronization signal is re-enabled the
monitor returns to normal operation.
The monitor enters DPMS OFF mode when the computer turns off both the
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal and Vertical Synchronization signals. This mode reduces the
monitor’s power consumption to 8W. While in this mode the Power
Indicator LED is amber. When the synchronization signals are re-enabled
the monitor returns to normal operation.
Section 2 - Installation
2.1 Attaching the Base
Figure 2-1 Connecting the Base
• Carefully place the monitor on its
side or top.
• Insert the hooks on the swivel base
into the slots in the bottom of the
monitor. Push down and forward
on the base until it snaps into
place.
• Place the display upright in an
appropriate location.
2.2 Connecting the Cable
• Make sure that power to the monitor and the computer is off.
• Connect the cable from the back of the monitor to the video connector
on the computer.
Figure 2-2 Monitor Connections
e
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Attach the power cord to the monitor and plug it into an AC outlet.
• The monitor is now ready for use.
Section 3 - Monitor Controls and LEDs
Figure 3-1 Monitor Controls
10
(on back)
1
2
9
8
7
6
5
4
3
1. Power Indicator:
LED green: The monitor is in normal operating mode.
LED amber: The monitor is in power saving mode.
LED off: The power switch is off.
2. Power Switch:
Push to turn the monitor on. Push again to turn the monitor off.
3. Brightness Control:
Adjusts the display brightness.
4. Contrast Control:
Adjusts the display contrast.
5. Horizontal-Size
Adjusts the display width.
6. Horizontal-Position
Adjusts the horizontal position.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Vertical-Size
Adjusts the display height.
8. Vertical-Position
Adjusts the vertical position.
9. Pincushion
Adjusts the shape of the left and right sides of the display.
10. Rotation Control (rear of unit)
Adjusts display tilt.
Section 4 - Troubleshooting
No picture, power indicator off
• Check AC cord is plugged into outlet and monitor.
• Turn on the power switch.
No picture, power indicators on.
• Adjust brightness and contrast controls.
No picture, power indicator amber.
• Monitor is in DPMS power saving mode. Press a key or move the
mouse.
• Check that video cable is connected completely.
Image is not centered
• Adjust Vertical Position and Horizontal Position controls.
Appendix A - Specifications
PictureTube
Size
Dot pitch
15-inchdiagonal
0.28mm
Surfacetreatment
Anti-glare
Bandwidth
DataArea
65 MHz
11.125 x 8.5 in.
Displaymode
Mode
VGA
VGA
VGA
VGA
VGA
VGA
8514A
SVGA
SVGA
Ultra VGA
Ultra VGA
Resolution
640 x 350
640 x 400
640 x 480
640 x 350
640 x 400
640 x 480
1024 x 768
800 x 600
800 x 600
1024 x 768
1024 x 768
V.Frequency
70 Hz
70 Hz
60 Hz
84 Hz
84 Hz
72 Hz
87 Hz
60 Hz
H.Frequency
31.47KHz
31.47KHz
31.47KHz
37.86KHz
37.86KHz
37.86KHz
35.52KHz
37.88KHz
48.09KHz
48.37KHz
56.47KHz
72 Hz
60 Hz
70 Hz
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronization
Deflection
Horizontal:
Vertical:
30-60KHz
50-90 Hz
Geometricdistortion
Linearitydistortion
H<=2.5mm,V<=2.5mm
H<=10%,V<=8%
Pincushiondistortion
<=2mm
Highvoltageregulation
H<=4mm,V<=4mm(0-25FL)
Lowradiation
Frontcontrols
MPR-Ispecification
Power, Brightness, Contrast, Horizontal-Size, Horizontal-
Position,Vertical-Size,Vertical-Position,Pincushion
Rear Control
Powersaving
DisplayTilt
DisplayPowerManagementSignaling(DPMS)
SUSPENDmode
OFFmode
30W (Max.)
8W (Max.)
Input voltage
100-240VAC,50/60Hz
90Wmaximum
Powerconsumption
Operating
Environment
Temperature
Humidity
Altitude
0-40°C
20-90%(non-condensing)
0-10,000ft.
Connector
15 Pin D-Sub
Dimensions
14.63 x 14.62 x 16.21 in.
Specificationssubjecttochangewithoutnotice.
Appendix B - Video Cable Pinout
Figure B-1 Pin
Layout and Pin
PIN SIGNAL
PIN SIGNAL
AssignmentChart
1
2
3
Red
9
No Connect
Green
Blue
10
11
Digital Ground
Monitor Sense 1
(Jumper to Pin 10)
4
5
Monitor Sense 1
(Jumper to Pin 10)
12
13
No Connect
Hor. Synch.
Monitor Sense 1
(Jumper to Pin 10)
6
7
8
Red Return
Green Return
Blue Return
14
15
Vert. Synch
No Connect
Appendix C - Two Year Warranty
MaxTechwarrantstotheoriginalbuyerofthisproductagainstdefectsinmaterialand
workmanship for two years from the date of purchase.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Exceptasspecifiedbelow,thiswarrantycoversalldefectsinmaterialorworkmanship
in this product. The following are not covered by the warranty:
1. AnyproductwhichisnotdistributedinNorthAmericabyMaxTechorwhichisnot
purchasedinNorthAmericafromanauthorizedMaxTechDealer.
2. Anyproductonwhichtheserialnumberhasbeendefaced,modifiedorremoved.
3. Damage,deteriorationormalfunctionresultingfrom:
a. Accident,misuse,abuse,neglect,fire,water,lightningorotheractsofnature,
commercial or industrial use, unauthorized product modification, or failure to
followinstructionssuppliedwiththeproduct.
b. RepairorattemptedrepairbyanyonenotauthorizedbyMaxTech.
c. Any shipment of the product (claims must be presented to the carrier).
d. Removalorinstallationoftheproduct.
e. Any other cause which does not relate to a product defect.
4. Cartons, carrying cases, batteries, external cabinets, magnetic tapes or any
accessoriesusedinconnectionwiththeproduct.
MaxTechwillpayalllaborandmaterialexpensesforcovereditems,butwewillnotpay
forthefollowing:
1. Removalorinstallationcharges.
2. Costs of initial technical adjustments (set-up), including adjustment of user
controls.
3. Paymentofshippingcharges.
HOW TO OBTAIN WARRANTY SERVICE
If you have problems with your monitor, refer to the troubleshooting section of this
manual.Ifyouareunabletoresolvetheproblem,contactthedealerordistributorfrom
whomtheproductwaspurchased.Adefectivemonitorshouldbereturnedinitsoriginal
packagingtoyourdealerforwarrantyservice.
LIMITATION OF IMPLIED WARRANTIES
Allimpliedwarranties,includingwarrantiesofmerchantabilityandfitnessforaparticular
purpose, are limited in duration to the length of this warranty.
EXCLUSION OF DAMAGES
MaxTech'sliabilityforanydefectiveproductislimitedtotherepairorreplacementofthe
product, at our option. MaxTech shall not be liable for:
1.Damagetootherpropertycausedbyanydefectsinthisproduct,damagesbased
uponinconvenience, lossofuseoftheproduct, lossoftime, commercialloss;or
2.Anyotherdamages,whetherincidental,consequentialorotherwise.
Somestatesdonotallowlimitationsonhowlonganimpliedwarrantylastsand/ordonot
allowtheexclusionorlimitationofincidentalorconsequentialdamages,sotheabove
limitationsandexclusionsmaynotapplytoyou.
HOW STATE LAW RELATES TO THE WARRANTY
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhich
varyfromstatetostate.
Appendix D - Notices
FCC Class B Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital
7
Download from Www.Somanuals.com. All Manuals Search And Download.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipmentgenerates,usesandcanradiateradiofrequencyenergy,andifnotinstalled
andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandthereceiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiverisconnected
• Consult the dealer or an experienced radio / TV technician for help
Notice:Shieldedcables,ifany,mustbeusedinordertocomplywiththeemissionlimits.
Any change or modification not expressly approved by the Grantee of the equipment
authorizationcouldvoidtheuser’sauthoritytooperatetheequipment.
Canadian DOC Compliance Statement
This equipment does not exceed Class B limits for radio noise emissions for a digital
apparatus,setoutintheRadioInterferenceRegulationsoftheCanadianDepartment
ofCommunications.Operationinaresidentialareamaycauseunacceptableinterfer-
encetoradioandTVreceptionrequiringtheowneroroperatortotakewhateversteps
necessarytocorrecttheinterference.
CetéquipementnedépassepasleslimitsdeClassBd'émissiondebruitsradioélectriques
pourlesappareilsnumériques,tellesqueprescritesparleRèglementsurlebrouillage
radioélectriqueétabliparleministèredesCommunicationsduCanada.L'exploitation
faite en milieu résidentiel peut entraîner le propriétaire ou l'opérateur à prendre
dispositionsnécessairespourenéliminerlescauses.
Disclaimer, Copyright, And Other Notices
Theinformationcontainedinthismanualhasbeenvalidatedatthetimeofthismanual's
production. The manufacturer reserves the right to make any changes and improve-
ments in the product described in this manual at any time and without notice.
Consequently,themanufacturerassumesnoliabilityfordamagesincurreddirectlyor
indirectlyfromerrors,omissionsordiscrepanciesbetweentheproductandthemanual.
Allregisteredtrademarksarethepropertyoftheirrespectiveowners.
Copyright©1996MaxTech.Allrightsreserved.Noreproductionofthisdocumentinany
formisallowedwithoutwrittenpermissionfromMaxTech.
FirstEdition
GZ/DR - Version 1.0
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|