Marantz Network Router RX8001 User Manual

Model RX8001 User Guide  
Wireless Extender  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 U  
s
e
r
G
u
i
d
e
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001User Guide  
Contents  
Before You Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Firmware Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Unpacking the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Configuring the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Stand-alone Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
IFU Approbation / Safety Content RX8001 . . . . . . . . . . . . i  
FCC Compliancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
Regulations According to R&TTE. . . . . . . . . . . . . . . . . . . . . ii  
Installing the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connecting the Extender to A/V equipment . . . . . . . 6  
Stand-alone Mode  
Network Mode  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Before You Start  
The Wireless Extender is an important element of the  
control A/V equipment via RF in the entire house.  
RC9001 and makes it possible to  
In order to use the Extender in a wireless  
Network:  
Configure the Extender: connect it to the PC and use the Configuration Tool.  
Install the Extender: connect it to external A/V equipment, like a TV or receiver.  
The Extender can be used in two ways:  
Stand-alone Mode  
This is the so-called ‘Ad-Hoc Mode’: a router is not required.  
Stand-alone Advantages:  
• The Extender is easily configured and installed.  
• It operates independently from other networks and network settings.  
Refer to the chapter ‘Stand-alone Connection’ on page 4 to configure the Extender in Stand-alone  
Mode.  
Note  
If you want to use a Multimedia server, like the Escient Fireball, in combination with one or  
more Extenders, the Extenders have to be configured in Network Mode.  
Network Mode  
This is the so-called ‘Infrastructure Mode’: the Extender is used in a network with a router.  
Network Advantages:  
• A network allows the use of repeaters, which enlarges the range of the  
RC9001 System.  
• When using a dedicated  
Network, the Extender can operate independently from settings  
in other networks.  
• The Extender in Network Mode can be given a fixed IP address, which increases reliability.  
• The network connection can be encrypted.  
Refer to the chapter ‘Network Connection’ on page 4 to configure the Extender in Network Mode.  
Note  
An Extender that has been configured in Stand-alone Mode can always be reconfigured for use  
in Network Mode and vice versa.  
You can use up to 16 different Extenders in the same  
Network.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Unpacking the Extender  
Wireless Extender  
Antenna  
Front Panel  
Power LED  
WiFi LED  
Ethernet LED  
Busy LED  
Back Panel  
Power input  
4 dipswitches for  
the IR outputs  
Stand-alone/  
Network switch  
Configuration switch  
• In Stand-alone Mode:  
changes the RF  
channel.  
• In Network Mode:  
indicates the  
connection type.  
4 IR outputs  
Ethernet input  
(RJ45)  
Extender ID switch  
IP address  
2 Mini-jack IR Cables  
Power Adapter  
Configuration Cable  
2 Dual IR Emitters  
Crossed Ethernet cable  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Configuring the Extender  
Note  
Before you start configuring the Extender, check for firmware updates in the Downloads section  
on http://www.marantz.com in the Home Entertainment section of your region.  
Refer to the chapter ‘Firmware Update’ on page 9 for further details.  
Stand-alone Connection  
To configure the Stand-alone Extender:  
1 Plug in the Extender’s power adapter.  
The Extender will start up. When start-up has finished, the Power and WiFi LEDs are green.  
2 Use the default switch settings of the Extender:  
Stand-alone/Network  
Configuration switch  
Extender ID  
Stand-alone  
1
0
Note  
• If there is already an Extender with ID 0, set the Extender ID switch to an ID that is not  
used yet.  
• If there is any interference with other products in or around the house, the  
Configuration switch can be set to a different RF channel.  
• Make sure the same Extender ID and RF channel are used on the Extender and the  
Control Panel.  
3 Configure the Control Panel’s configuration file so that the Control Panel can work  
with the Extender. For more details, refer to the Wizz.it Ex Online Help.  
Network Connection  
In the case of a network connection, the Extender is made part of the wireless  
There are two ways to use the Extender in a network:  
Network.  
Wired connection  
Straight Ethernet Cable  
Extender  
Control Panel  
Router  
Wireless  
Access Point  
Wireless connection  
Extender  
Control Panel  
Wireless  
Access Point  
Note  
When you set up a Wireless  
Network connection, make sure the Control Panel  
always shows minimal one bar of WiFi connectivity. If this is not the case, you may need  
additional Wireless Access points in your network.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Extender  
Configuration  
cable  
To configure the Network Extender:  
1 Connect the Extender to the PC with the  
configuration cable (this is the crossed  
Ethernet cable enclosed).  
2 Set the switches correctly:  
Stand-alone/Network  
Network  
Configuration switch  
Extender ID  
2
0
Note  
• If there is already an Extender with ID 0, set the Extender ID switch to an ID that is not  
used yet.  
• Make sure the same Extender ID is used on the Extender and the Control Panel.  
3 Plug in the Extender’s power adapter.  
The Extender will start up. After startup, the Power and Ethernet LEDs are green and the Busy  
LED is red/green blinking.  
4 Open the browser.  
5 Type the IP address of the Extender 192.168.8.80 (printed on the back of the Extender)  
in the address bar of the browser.  
The Configuration Tool opens in the browser.  
6 Follow the onscreen instructions and make sure you have the following information at  
hand:  
• If the Extender will be connected wirelessly to the  
Network: the SSID and  
encryption settings (WPA encryption is currently not supported.)  
• If the Extender will be operating with a fixed IP address: the IP address, netmask and  
default gateway.  
Tip  
To ensure optimal performance, use a dedicated network for all  
communication.  
This makes the  
Network independent from other network traffic and changes in  
network settings.  
7 Disconnect the Extender from the PC.  
8 Connect the Extender to the  
Network:  
• For a wired connection, connect the Extender to the router by means of a straight Ethernet  
cable.  
• For a wireless connection, you do not need to connect any more cables.  
9 Set the switches correctly:  
Stand-alone/Network  
Configuration switch  
Extender ID  
Network  
1
0
The Extender will restart. After startup,  
• In a wired network connection, the Power and Ethernet LEDs are green and the Busy LED  
blinks green when it’s processing a code or a macro from the Control Panel.  
• In a wireless network connection, the Power and WiFi LEDs are green and the Busy LED  
blinks green when it’s processing a code or a macro from the Control Panel.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Configuring the Extender through a Router  
When the Extender is already installed and connected to external A/V equipment, it is possible to  
configure it through a router via a straight Ethernet cable. It is not possible to configure the  
Extender wireless via the router.  
1 Connect the Extender to the router, and the router to the PC, as indicated below.  
Straight  
Ethernet cable  
Extender  
Router  
2 Set the Extender’s Configuration switch  
3 Open the Wizz.it Ex on the PC.  
to 3.  
4 In the Tools menu, select Extender Discovery.  
The Extender Discovery tool appears, with a list of all the detected Extenders in the  
Network.  
5 Select the Extender that you want to configure and click on the Configure button.  
The Configuration Tool opens in the browser.  
6 Finalize the configuration, as described in the instructions on page 5.  
Tip  
When the Extender is not recognized by the Extender Discovery tool, configure the Extender  
directly with the configuration cable, as described on page 5.  
Installing the Extender  
Warning Keep the Extender away from heat sources such as amplifiers.  
Place the  
Before connecting the Extender to external A/V equipment,  
make sure that the antenna is placed correctly.  
antenna in an  
upright position.  
Connecting the Extender to A/V equipment  
For the Extender to transmit an IR signal, you need to connect it to the A/V component via the  
IR Output on the back of the Extender. In contrast to previous Marantz Extenders, the RX8001 has no  
IR blaster.  
To connect the Extender to A/V equipment, use one of the following cables enclosed with the  
Extender:  
• a Dual IR emitter;  
Insert the mini-jack  
Attach the  
connector of the  
emitter to the  
Dual IR emitter in  
infrared receiver  
the IR output of  
the Extender.  
of the A/V  
component.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
-or-  
• a mini-jack IR cable.  
Insert one mini-jack  
connector of the  
mini-jack cable in  
the IR output of the  
Extender.  
Insert the other  
mini-jack  
connector in the  
A/V component.  
Adjusting the Power Level of the IR Outputs  
At the back of the Extender, there are 4 dipswitches, one for each IR output. Use these dipswitches  
to configure the power level of the Dual IR emitters and the mini-jack cables.  
For example, flip the dipswitch down to lower the power level when the Extender is connected to  
an external IR bus system.  
Support  
Troubleshooting  
What Do the LEDs Indicate?  
LEDs  
Ethernet LED  
WiFi LED  
Busy LED  
Colors  
The Extender’s IP address is  
being determined.  
The Extender’s IP address is  
being determined.  
The Extender is busy processing  
a short code or macro from the  
Control Panel.  
Green blinking  
The Extender is functioning  
normally.  
The Extender is functioning  
normally.  
The Extender is busy processing  
a long macro from the Control  
Panel.  
Green  
The Extender is being  
configured.  
Red/green blinking  
Red  
Refer to the topic ‘There is an  
IP conflict’ on page 7.  
Refer to the topic  
Refer to the topic ‘There are  
duplicate Extender IDs’  
on page 8.  
The Extender cannot  
communicate with the  
wireless network’ on page 8.  
Refer to the topic ‘The IP address  
cannot be determined’ on  
page 7.  
The Extender is starting up.  
Wait until startup has finished.  
Red blinking  
There is an IP conflict  
There is another A/V component in the network that is using the same fixed IP address as the  
Extender. Change the IP address of the Extender in the Configuration Tool.  
If the problem persists, check the router settings.  
The IP address cannot be determined  
• When using the Extender: make sure that the Extender is connected to the router with a straight  
Ethernet cable.  
• When configuring the Extender: make sure the PC is not using a fixed IP address but is using  
DHCP instead.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
• Make sure the router is switched on. If the router is using DHCP, the Extender’s IP address cannot  
be determined. Make sure to use the correct network settings on the router.  
The Extender cannot communicate with the wireless network  
The WiFi LED is red  
• Make sure that the Extender is in range of the Wireless Access Point.  
• Make sure that you filled in the correct secret in the Configuration Tool.  
• Add the Extender’s MAC address to the router’s list of accepted MAC addresses.  
The WiFi LED is red blinking  
• Check the router’s network settings and make sure that it can operate with the Extender.  
• If the LED doesn’t stop blinking, unplug the power adapter, wait a few seconds, and plug it in  
again.  
Finding the Exact Location of an A/V component’s IR Receiver  
1 Remove the protective tape of the Dual IR emitters.  
2 Set the Dual IR emitters to the minimal power level, and hold the adhesive side of one  
of the emitters 0.4 - 0.8 inch / 1 - 2 cm in front of the A/V component.  
3 Make sure the Control Panel is configured to operate with the A/V component.  
4 Move the emitter across the front panel of the A/V component, and at the same time,  
send commands with the Control Panel to the A/V component.  
Take note of when the A/V component reacts to the IR signals of the emitter.  
5 When the A/V component reacts, position the emitter in that place.  
Operating A/V components with the Extender  
The A/V components do not respond to commands from the Extender  
• Check if the Busy LED blinks green when you send a command with the Control Panel. If the Busy  
LED does not blink, the Extender is not receiving commands from the Control Panel;  
• Make sure that the Control Panel is configured correctly in Wizz.it Ex;  
• Make sure that the Extender is configured correctly in the Configuration Tool and connected  
properly to the A/V components;  
• Make sure that the switches on the Extender are set correctly.  
• Make sure that the Wireless Access Point is on and configured correctly.  
• Make sure that the Extender is in range of the Wireless Access Point. If the Wireless Access  
Point is placed higher or lower than the Extender, place the Extender’s antenna horizontally for  
optimum range.  
• Not all Wireless Access Points are working equally well in combination with the Control Panel.  
Make sure you use a quality access point.  
There are duplicate Extender IDs  
Using the Extender ID switch, assign a unique ID to each Extender in the same  
Network.  
Make sure the Control Panel is configured accordingly in Wizz.it Ex.  
You can use up to 16 different Extenders in the same  
Network.  
The Busy LED blinks green when the Control Panel is not in use  
This does not mean that something is wrong with the Extender. It merely indicates that the Extender  
is being operated by a different Control Panel. When the Busy LED stops blinking, you can use the  
Extender again.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Resetting the Extender  
This is only necessary when the Extender displays unusual behavior.  
To perform a reset, unplug the Extender from the electrical socket. Wait a few seconds, and plug it  
in again.  
Firmware Update  
When an update of the Extender firmware is available, this will be announced on the Marantz  
Note  
You can always see the current version of the firmware in the Configuration Tool.  
1 Download the new version of the firmware on the PC.  
2 Unplug the Extender. The Extender can be updated in the following ways.  
Updating the Extender with the configuration cable  
1 Connect the Extender to the PC with the configuration cable.  
2 Set the switches correctly.  
Stand-alone/Network  
Configuration switch  
Extender ID  
Network  
2
0
3 Open the browser.  
4 Type the IP address of the Extender: 192.168.8.80 (printed on the back of the Extender)  
in the address bar of the browser.  
The Configuration Tool opens in the browser.  
5 Select Firmware Update in the left navigation pane.  
The Firmware Update page opens.  
6 Follow the onscreen instructions.  
When you are asked to browse to the update file, you need to select the ZIP file you  
downloaded earlier from the website.  
Updating the Extender through a router  
If the Extender is already installed and connected to A/V equipment, it may be more convenient to  
update it through a router via a straight Ethernet cable. It is not possible to configure the Extender  
wireless via the router.  
1 Connect the Extender to the router, and the router to the PC.  
2 Set the switches correctly.  
Stand-alone/Network  
Configuration switch  
Extender ID  
Network  
3
0
3 Open the Wizz.it Ex on the PC.  
4 In the Tools menu, select Extender Discovery.  
The Extender Discovery tool appears, with a list of all the detected Extenders in the  
Network.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
5 Select the Extender that you want to configure and click on the Configure button.  
The Configuration Tool opens in the browser.  
6 Select Firmware Update in the left navigation pane.  
The Firmware Update page opens.  
7 Follow the onscreen instructions.  
When you are asked to browse to the update file, you need to select the ZIP file you  
downloaded earlier from the website.  
Tip  
When your Extender is not recognized by the Extender Discovery tool, update the Extender  
with the crossed Ethernet cable, as described on page 9.  
Specifications  
The specifications and design of this product are subject to change without notice.  
General  
Dark grey ABS housing with poly carbonate front plate  
802.11 b/g compliant RF technology  
4 LED indications for Power, WiFi, Network and Busy  
Up to 16 extenders and 16 control panels in a system (for all modes)  
4 addressable outputs for IR emitters  
Ethernet RJ45 connection  
Rotatable RF antenna  
Positioning: freestanding or mounted in any position  
Modes  
Stand-alone (wireless): Similar to WiFi ad-hoc mode; no access point and  
router required  
Network (wireless): Similar to WiFi infrastructure mode; used in a system with  
a router and access point  
Network (wired via Ethernet): used in a system with a router and access point  
Dimensions  
3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)  
32°F to 122°F (0°C to 50°C)  
Operating temperature  
Infrared (IR)  
IR frequency range: 25kHz-1MHz (including DC/flash codes)  
IR power out: 2 levels  
Radio Frequency (RF)  
Dual IR emitters  
802.11g at 2.4 GHz with additional proprietary protocol  
Number of IR emitters: up to 4 (2x2), emitters wired in series  
0.13 inch (3.5 mm) mono mini-jack  
Cable length: 9 ft (2.7 meters)  
Mono mini-jack cables  
0.13 inch (3.5 mm) mono mini-jack  
Cable length: 5 ft (1.5 meters)  
Power adapter  
Accessories  
100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved)  
Warranty certificate (For USA/Canada only)  
Wireless Extender User Guide  
© Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki-  
SHI, Kanagawa, 210-8569, Japan.  
Remarks:  
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.  
Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors  
in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender.  
The information in this User Guide may be subject to change without prior notice. All brand or product names are  
trademarks or registered trademarks of their respective companies or organizations.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IFU Approbation / Safety Content  
FCC Compliancy  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
• This device may not cause harmful interference.  
• This device must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
part 15 of the FCC rule.  
These limits are designed to provide reasonable protection against harmful interference in residential  
installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If the equipment  
does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a different circuit from the receiver.  
• Consult the dealer or an experienced radio/TV technician for help.  
CAUTION The user changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
Notice for Canada / Remark pour le Canada  
This class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada  
Regulations According to R&TTE  
Declaration  
Hereby, Marantz Europe, a division of D&M Europe B.V. declares that RX8001 is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC:  
• Radio: EN 300 328  
• EMC: ETSI EN 301 489-1, ETSI EN 301 489-17  
• Safety: EN60950-1  
Česky  
My, Marantz Europe, a division of D&M Europe B.V., prohlašujeme že výrobek RX8001 splňuje základní  
požadavky a ostatní příslušná ustanovení Směrnice 1999/5/EC.  
Dansk  
Deutsch  
Marantz Europe, a division of D&M Europe B.V., erklærer herved, at følgende udstyr RX8001  
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.  
Hiermit erklärt Marantz Europe, a division of D&M Europe B.V., dass sich dieses Gerät (RX8001) in  
Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der  
Richtlinie 1999/5/EG befindet". (BMWi).  
Eesti keeles Käesolevaga kinnitab Marantz Europe, a division of D&M Europe B.V. et see RX8001 vastab Euroopa  
Nõukogu direktiivi 1999/5/EC põhinõuetele ja muudele olulistele tingimustele.  
Ελληνικά ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Marantz Europe, a division of D&M Europe B.V. ∆ΗΛΩΝΕΙ ΟΤΙ RX8001  
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ  
ΤΗΣ Ο∆ΗΛΙΑΣ 1999/5/ΕΚ.  
Español  
Por medio de la presente Marantz Europe, a division of D&M Europe B.V. declara que RX8001 cumple  
con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva  
1999/5/CE.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Français  
Par la présente Marantz Europe, a division of D&M Europe B.V., déclare que les appareils du type  
RX8001 sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive  
1999/5/CE.  
Italiano  
Magyar  
Con la presente Marantz Europe, a division of D&M Europe B.V., dichiara che questo RX8001 è  
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.  
A gyártó Marantz Europe, a division of D&M Europe B.V., kijelenti, hogy ez a RX8001 megfelel az  
1999/5/EK irányelv alapkövetelményeinek és a kapcsolódó rendelkezéseknek.  
Nederlands Hierbij verklaart Marantz Europe, a division of D&M Europe B.V., dat deze RX8001 in  
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.  
Polski  
Niniejszym firma Marantz Europe, a division of D&M Europe B.V., oświadcza, że RX8001 spełnia  
wszystkie istotne wymogi i klauzule zawarte w dokumencie „Directive 1999/5/EC”.  
Português Marantz Europe, a division of D&M Europe B.V., declara que este RX8001 está conforme com os  
requisitos essenciais e outras disposições da Directiva 1999/5/CE.  
Slovensky Výrobca Marantz Europe, a division of D&M Europe B.V. týmto deklaruje, že táto RX8001 je v súlade so  
základnými požiadavkami a ďalšími relevantnými predpismi smernice 1999/5/EC.  
Slovensko Marantz Europe, a division of D&M Europe B.V. s tem potrjuje, da je ta RX8001 skladen/a z osnovnimi  
zahtevami in ustreznimi določili Direktive 1999/5/EC.  
Suomi  
Marantz Europe, a division of D&M Europe B.V., vakuuttaa täten että RX8001 tyyppinen laite on  
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.  
Svenska  
Härmed intygar, Marantz Europe, a division of D&M Europe B.V., att denna RX8001 står i  
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av  
direktiv 1999/5/EG.  
Declaration of Conformity(DoC)  
Marking  
In line with CE marking regulations: the CE mark and the class 2 identifier are added to the equipment:  
This device can be used in the following countries:  
AT  
BE ꢀ  
CH ꢀ  
DE ꢀ  
DK ꢀ  
GR ꢀ  
ES ꢀ  
FI ꢀ  
FR ꢀ  
IRE ꢀ  
IT ꢀ  
LU ꢀ  
NL ꢀ  
PT ꢀ  
SE ꢀ  
UK ꢀ  
Czech  
Likvidace starého výrobku  
Tento výrobek je navržen a vyroben z materiálů a komponentů nejvyšší kvality, které je možné recyklovat a  
opětovně použít. Pokud je výrobek označen tímto symbolem přeškrtnutého kontejneru, znamená to, že  
výrobek podléhá směrnici EU 2002/96/EC. Informujte se o místním systému sběru tříděného odpadu  
elektrických a elektronických výrobků. Postupujte podle místních pravidel a neodkládejte takové staré  
výrobky do běžného komunálního odpadu. Správná likvidace starého výrobku pomůže předcházet  
případným nepříznivým účinkům na životní prostředí a lidské zdraví.  
Danish  
Bortskaffelse af dit gamle produkt  
Dit produkt er konstrueret med og produceret af materialer og komponenter af høj kvalitet, som kan  
genbruges. Når dette markerede affaldsbøttesymbol er placeret på et produkt betyder det, at produktet er  
omfattet af det europæiske direktiv 2002/96/EC. Hold dig orienteret om systemet for særskilt indsamling af  
elektriske og elektroniske produkter i dit lokalområde. Overhold gældende regler, og bortskaf ikke dine  
gamle produkter sammen med dit almindelige husholdningsaffald. Korrekt bortskaffelse af dine gamle  
produkter er med til at skåne miljøet og vores helbred.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IFU Approbation / Safety Content  
Dutch  
Verwijdering van uw oude product  
Uw product is vervaardigd van kwalitatief hoogwaardige materialen en onderdelen, welke gerecycled en  
opnieuw gebruikt kunnen worden. Als u op uw product een doorstreepte afvalcontainer op wieltjes ziet,  
betekent dit dat het product valt onder de EU-richtlijn 2002/96/EC. Win inlichtingen in over de manier  
waarop elektrische en elektronische producten in uw regio gescheiden worden ingezameld. Neem bij de  
verwijdering van oude producten de lokale wetgeving in acht en plaats deze producten niet bij het gewone  
huishoudelijke afval. Als u oude producten correct verwijdert voorkomt u negatieve gevolgen voor het  
milieu en de volksgezondheid.  
Finnish  
French  
German  
Vanhan tuotteen hävittäminen  
Tuotteesi on suunniteltu ja valmistettu laadukkaista materiaaleista ja komponenteista, jotka voidaan  
kierrättää ja käyttää uudelleen. Tuotteeseen kiinnitetty yliviivatun roskakorin kuva tarkoittaa, että tuote  
kuuluu Euroopan parlamentin ja neuvoston direktiivin 2002/96/EC soveltamisalaan. Ota selvää  
sähkölaitteille ja elektronisille laitteille tarkoitetusta kierrätysjärjestelmästä alueellasi. Noudata paikallisia  
sääntöjä äläkä hävitä vanhoja tuotteita tavallisen talousjätteen mukana. Vanhojen tuotteiden hävittäminen  
oikealla tavalla auttaa vähentämään ympäristölle ja ihmisille mahdollisesti koituvia haittavaikutuksia  
Mise au rebut des produits en fin de vie  
Ce produit a été conçu et fabriqué avec des matériaux et composants recyclables de haute qualité. Le  
symbole d’une poubelle barrée apposé sur un produit signifie que ce dernier répond aux exigences de la  
directive européenne 2002/96/EC. Informez-vous auprès des instances locales sur le système de collecte  
des produits électriques et électroniques en fin de vie. Conformez-vous à la législation en vigueur et ne  
jetez pas vos produits avec les déchets ménagers. Seule une mise au rebut adéquate des produits peut  
empêcher la contamination de l’environnement et ses effets nocifs sur la santé.  
Entsorgung Ihres alten Geräts  
Ihr Gerät wurde unter Verwendung hochwertiger Materialien und Komponenten entwickelt und hergestellt,  
die recycelt und wieder verwendet werden können. Befindet sich dieses Symbol (durchgestrichene  
Abfalltonne auf Rädern) auf dem Gerät, bedeutet dies, dass für dieses Gerät die Europäischen Richtlinie  
2002/96/EG gilt. Informieren Sie sich über die geltenden Bestimmungen zur getrennten Sammlung von  
Elektro- und Elektronik-Altgeräten in Ihrem Land. Richten Sie sich bitte nach den geltenden Bestimmungen  
in Ihrem Land, und entsorgen Sie Altgeräte nicht über Ihren Haushaltsabfall. Durch die korrekte Entsorgung  
Ihrer Altgeräte werden Umwelt und Menschen vor möglichen negativen Folgen geschützt.  
Greek  
Αꢀόρριψη ꢀαλιού ꢀροꢁόντος  
Το ꢀροꢁόν αυτό έχει σχεδιαστεί και κατασκευαστεί µε υψηλής ꢀοιότητας υλικά και εξαρτήµατα  
ꢀου µꢀορούν να ανακυκλωθούν και να ξαναχρησιµοꢀοιηθούν. Όταν ένα ꢀροꢁόν φέρει την  
ένδειξη ενός διαγραµµένου κάδου µε ρόδες, τότε το ꢀροꢁόν αυτό καλύꢀτεται αꢀό την Οδηγία  
2002/96/ΕΚ. Παρακαλούµε να ενηµερωθείτε σχετικά µε το τοꢀικό σύστηµα ξεχωριστής  
συλλογής ηλεκτρικών και ηλεκτρονικών ꢀροꢁόντων. Παρακαλούµε να ακολουθείτε την τοꢀική  
νοµοθεσία και να µην αꢀορρίꢀτετε τα ꢀαλιά σας ꢀροꢁόντα µαζί µε τα οικιακά σας  
αꢀορρίµµατα. Η σωστή µέθοδος αꢀόρριψης των ꢀαλιών σας ꢀροꢁόντων θα συµβάλει στην  
αꢀοφυγή αρνητικών εꢀιꢀτώσεων στο ꢀεριβάλλον και την ανθρώꢀινη υγεία.  
Hungarian Az elhasznált termék hulladékkezelése  
Ezt a terméket minőségi, újrafeldolgozható és újrahasznosítható anyagok és alkatrészek felhasználásával  
tervezték és készítették. A termékhez kapcsolódó áthúzott kerekes kuka szimbólum azt jelenti, hogy a  
termékre vonatkozik a 2002/96/EK. Európai irányelv. Kérjük, informálódjon az elektromos és elektronikus  
hulladékok szelektív gyűjtésének helyi rendszeréről. Kérjük, a helyi szabályok figyelembe vételével járjon  
el, és ne dobja az elhasznált terméket a háztartási hulladékgyűjtőbe. Az elhasznált termék megfelelő  
hulladékkezelése segítséget nyújt a környezettel és az emberi egészséggel kapcsolatos esetleges negatív  
következmények megelőzésében.  
Italian  
Smaltimento di vecchi prodotti  
Il prodotto è stato progettato e assemblato con materiali e componenti di alta qualità che possono essere  
riciclati e riutilizzati. Se su un prodotto si trova il simbolo di un bidone con ruote, ricoperto da una X, vuol  
dire che il prodotto soddisfa i requisiti della Direttiva comunitaria 2002/96/CE. Informarsi sulle modalità di  
raccolta, dei prodotti elettrici ed elettronici, in vigore nella zona in cui si desidera disfarsi del prodotto.  
Attenersi alle normative locali per lo smaltimento dei rifiuti e non gettare i vecchi prodotti nei normali  
rifiuti domestici. Uno smaltimento adeguato dei prodotti aiuta a prevenire l’inquinamento ambientale e  
possibili danni alla salute.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IFU Approbation / Safety Content  
Norwegian Avhending av gamle produkter  
Produktet er utformet og produsert i materialer og komponenter av høy kvalitet, som kan resirkuleres og  
brukes på nytt. Når denne søppelbøtten med kryss på følger med et produkt, betyr det at produktet dekkes  
av det europeiske direktivet 2002/96/EU. Finn ut hvor du kan levere inn elektriske og elektroniske produkter  
til gjenvinning i ditt lokalmiljø. Overhold lokale regler, og ikke kast gamle produkter sammen med  
husholdningsavfallet. Riktig avhending av de gamle produktene dine vil hjelpe til med å forhindre  
potensielle negative konsekvenser for miljøet og menneskers helse.  
Polish  
Usuwanie zużytych produktów  
Niniejszy produkt został zaprojektowany i wykonany w oparciu o wysokiej jakości materiały i podzespoły,  
które poddane recyklingowi mogą być ponownie użyte. Jeśli na produkcie znajduje się symbol  
przekreślonego pojemnika na śmieci na kółkach, podlega on postanowieniom dyrektywy 2002/96/WE.  
Należy zapoznać się lokalnymi zasadami zbiórki i segregacji sprzętu elektrycznego i elektronicznego.  
Należy przestrzegać lokalnych przepisów i nie wyrzucać zużytych produktów elektronicznych wraz z  
normalnymi odpadami gospodarstwa domowego. Prawidłowe składowanie zużytych produktów pomaga  
ograniczyć ich szkodliwy wpływ na środowisko naturalne i zdrowie ludzi.  
Portuguese Eliminação do seu antigo produto  
O seu produto foi desenhado e fabricado com matérias-primas e componentes de alta qualidade, que  
podem ser reciclados e reutilizados. Quando este símbolo, com um latão traçado, está afixado a um  
produto significa que o produto é abrangido pela Directiva Europeia 2002/96/EC. Informe-se acerca do  
sistema de recolha selectiva local para produtos eléctricos e electrónicos. Aja de acordo com os  
regulamentos locais e não descarte os seus antigos produtos com o lixo doméstico comum. A correcta  
eliminação do seu antigo produto ajuda a evitar potenciais consequências negativas para o meio ambiente  
e para a saúde pública.  
Slovak  
Likvidácia tohto produktu  
Váš produkt bol navrhnutý a vyrobený pomocou vysokokvalitných materiálov a komponentov, ktoré sa  
dajú recyklovať a znova využiť. Keď sa na produkte nachádza symbol prečiarknutého koša s kolieskami,  
znamená to, že tento produkt pokrýva Európska smernica 2002/96/EC. Informujte sa o miestnom systéme  
separovaného zberu elektrických a elektronických výrobkov. Postupujte podľa miestnych pravidiel a  
nevyhadzujte tento produkt do bežného odpadu z domácnosti. Správnou likvidáciou starého produktu  
pomôžete zabrániť možným negatívnym následkom na životné prostredie a ľudské zdravie.  
Slovenian  
Spanish  
Odlaganje starega izdelka  
Izdelek je zasnovan in izdelan iz visokokakovostnih materialov in komponent, ki jih je mogoče reciklirati in  
ponovno uporabiti. Če je izdelek označen s prečrtanim košem za smeti, to pomeni, da je v skladu z  
Direktivo EU 2002/96/ES. Seznanite se z lokalnim sistemom za zbiranje odpadnih električnih in  
elektronskih komponent. Upoštevajte lokalne predpise in izrabljenega izdelka ne odlagajte z običajnimi  
gospodinjskimi odpadki. S pravilnim odlaganjem izrabljenih izdelkov pomagate preprečevati negativne  
posledice na okolje in zdravje ljudi.  
Desecho del producto antiguo  
El producto se ha diseñado y fabricado con materiales y componentes de alta calidad, que se pueden  
reciclar y volver a utilizar. Cuando este símbolo de contenedor de ruedas tachado se muestra en un  
producto indica que éste cumple la directiva europea 2002/96/EC. Obtenga información sobre la recogida  
selectiva local de productos eléctricos y electrónicos. Cumpla con la normativa local y no deseche los  
productos antiguos con los desechos domésticos. El desecho correcto del producto antiguo ayudará a  
evitar consecuencias negativas para el medioambiente y la salud humana.  
Swedish  
Kassering av din gamla produkt  
Produkten är utvecklad och tillverkad av högkvalitativa material och komponenter som kan både återvinnas  
och återanvändas. När den här symbolen med en överkryssad papperskorg visas på produkten innebär det  
att produkten omfattas av det europeiska direktivet 2002/96/EG. Ta reda på var du kan hitta närmaste  
återvinningsstation för elektriska och elektroniska produkter. Följ de lokala reglerna och släng inte dina  
gamla produkter i det vanliga hushållsavfallet. Genom att kassera dina gamla produkter på rätt sätt kan du  
bidra till att minska eventuella negativa effekter på miljö och hälsa.  
Turkish  
Eski ürününüzün atılması  
Ürününüz, geri dönüşüme tabi tutulabilen ve yeniden kullanılabilen, yüksek kalitede malzeme ve  
parçalardan tasarlanmış ve üretilmiştir. Bir ürüne, çarpı işaretli tekerlekli çöp arabası işaretli etiket  
yapıştırılması, söz konusu ürünün 2002/96/EC sayılı Avrupa Yönergesi kapsamına alınması anlamına  
gelir. Lütfen, elektrikli ve elektronik ürünlerin toplanması ile ilgili bulunduğunuz yerdeki sistem  
hakkında bilgi edinin. Lütfen, yerel kurallara uygun hareket edin ve eskiyen ürünlerinizi, normal evsel  
atıklarınızla birlikte atmayın. Eskiyen ürününüzün atık işlemlerinin doğru biçimde gerçekleştirilmesi,  
çevre ve insan sağlığı üzerinde olumsuz etkilere yol açılmasını önlemeye yardımcı olacaktır.  
Marantz America, Inc. 100 Corporate Drive Mahwah, NJ07430  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RX8001 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can find your nearest authorized distributor or dealer on our website.  
is a registered trademark.  
Printed in Belgium  
05/2007 00M40CW851250 mzh-d  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KRK Recording Equipment E8B User Manual
Kustom Musical Instrument Amplifier KG110 User Manual
KWC Indoor Furnishings 10061213 User Manual
Learning Resources Gas Grill ler3667 User Manual
LG Electronics Answering Machine MESSAGING PHONE User Manual
Mackie Car Speaker SWA 1801z User Manual
Magnadyne Cassette Player M9850 User Manual
Makita Blower BHX2500 User Manual
Manitowoc Ice Air Compressor J 0600 User Manual
Melissa Styling Iron 635 069 User Manual