MPC270/17_20051202 2/12/05 14:19 Page 1
QUICK START
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Free Product Exchange
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
User guide
MAGNAVOX warrants this product against defect in material or workman-
•
•
•
•
Damage occurring to product during shipping when improperly packaged or
2
p
1
S M A R T . V E R Y S M A R T .
• Once your Magnavox purchase is regis-
tered, you’re eligible to receive all the
privileges of owning a Magnavox product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
ship, subject to any conditions set forth as follows:
PROOF OF PURCHASE:
cost associated with packaging.
Product lost in shipment and no signature verification of receipt can be
provided.
You must have proof of the date of purchase to exchange the product.
A sales receipt or other document showing the product and the date
that you purchased the product as well as the authorized retailer included,
is considered such proof.
A product used for commercial or institutional purposes (including but not
limited to rental purposes).
MPC270
Product sold AS IS or RENEWED.
Warranty
Verification
Registering your product Your completed
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
Owner
Confirmation
Model
Registration
Returning yourWarranty
Registration Card right
away guarantees you’ll
WHERE WARRANTY EXCHANGE IS AVAILABLE:
COVERAGE:
Exchange is available in all countries where Magnavox officially distributes the
product. In countries where Magnavox does not distribute the product, the
local Magnavox organization will attempt to exchange the product, although
there may be a delay if the appropriate product is not readily available or
special customs processes are implied.
Warranty coverage begins the day you buy the product. For a period of
ninety (90) days from the date of purchase, if the product is determined to
be defective, Magnavox will exchange the defective product with a new or
renewed product, at its option, at no charge.The replacement product is
covered only for the warranty period of the original product.When the war-
ranty on the original product expires, the warranty on all replaced products
also expires.When it is necessary for you to ship the product to Magnavox
for exchange, you will pay the shipping cost for shipment to Magnavox.
Magnavox will pay the shipping costs when returning a product to you.
Warranty Registration
Card serves as verifica-
tion of ownership in the receive all the information
PORTABLE CD PLAYER
3
4
#
event of product theft
and special offers which
you qualify for as the
owner of your model.
FOR EXCHANGE INTHE U.S.A., PUERTO RICO, OR U.S.VIRGIN
your Magnavox warranty. or loss.
ISLANDS…
Read this manual first!
If you have any problems, do not attempt
to return this product to the store.
Contact Magnavox Customer Care Center at:
1-800-705-2000
For fast help, call us first!
1-800-705-2000
Note:The exchange model supplied will be the most comparable one in
Magnavox current inventory. Shipping of your product to Magnavox implies
intent to follow the specified requirements of the warranty and exchange
program. Product received by Magnavox cannot be returned. Replacement
product can only be sent if all warranty requirements are met. Failure to
follow all requirements can result in delay of exchange process.
FOR EXCHANGE IN CANADA…
1-800-661-6162 (French Speaking)
Know sthaesefety
symbols
For Customer Use
Enter below the Serial No. which is
1-800-705-2000 (English or Spanish Speaking)
locatedontherearofthecabinet.Retain
this information for future reference.
HOLD ➟➟OFF
5
PLAY 2;
6 VOL
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY FOR THE CONSUMER. MAGNAVOX SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION
TO THE DURATION OF THIS WARRANTY.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. _____________________
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
•
•
Shipping charges to return defective product.
Serial No. ______________________
Labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of antenna
systems outside of the product.
This “bolt of lightning”
indicates uninsulated material
within your unit may cause an
electrical shock. For the safety of
everyone in your household, please
do not remove product covering.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
•
•
Product repair and/or part replacement because of improper installation,
connections to improper voltage supply, abuse, neglect, misuse, accident,
unauthorized repair or other cause not within the control of Magnavox.
A product that requires modification or adaptation to enable it to operate
in any country other than the country for which it was designed,
manufactured, approved and/or authorized, or repair of products
damaged by these modifications.
Some states do not allow the exclusions or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. In addition,
if you enter into a service contract agreement with the MAGNAVOX
partnership within ninety (90) days of the date of sale, the limitation on
how long an implied warranty lasts does not apply.
!!!
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
The “exclamation point” calls
attention to features for which
you should read the enclosed litera-
ture closely to prevent operating and
maintenance problems.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
EL 6475-E005: 04/01
2
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
MAC5097
(Warranty: 4835 710 27750)
English
CONTROLS
POWER SUPPLY / GENERAL INFORMATION
Mains adapter (supplied or optionally available)
BATTERIES
CD PLAY
CD PLAY
PHILIPS CONSUMER ELECTRONICS,
A Division of Philips Consumer Electronics North America
Batteries (supplied or optionally available)
In-car use (connections supplied or optionally available)
CD player and CD handling
CONTROLS ( see figure 1)
P.O. Box 671539, Marietta, GA 30006-0026
or call
Use only a 4.5 V adapter (450 mA direct current, positive pole to the center pin).
You can use the following batteries with this CD-player:
normal batteries type LR6, UM3 or AA (preferably Philips), or
alkaline batteries type LR6, UM3 or AA (preferably Philips).
1
...........................display
Any other kind of adapter may damage the player.
•
•
Do not touch the lens Aof the CD player.
Only use a 4.5 V DC car voltage converter (positive pole to the center pin) and
cassette car adapter. Any other converter may damage the set.
•
•
Do not expose the unit, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
1
Make sure the local voltage corresponds to the power
2 2; ......................switches the player on, starts or pauses CD play
3 ∞ ......................skips and searches tracks backward
4 9.........................stops CD play, clears a program or switches the player off
5 § .......................skips and searches tracks forward
6 OPEN 2.............opens the CD lid
1-800-705-2000
adapter’s voltage.
1
Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2
Connect the power adapter to the 4.5V DC jack of the
player and to the wall outlet.
Notes:– Old and new or different types of batteries should not be combined.
– Remove batteries if they are empty or if the player is not going to
be used for a long time.
12 V DC
•
•
You can clean the CD player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
To clean the CD, wipe it in a straight line from the
center toward the edge using a soft, lint-free cloth. A
Note: Always disconnect the adapter when you are not
using it.
4,5 V DC
2
Plug the voltage converter into the
cigarette lighter socket (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input socket on the
set.
MPC270
7 p / LINE OUT....3.5 mm headphone jack and LINE OUT jack to connect the
Inserting batteries
1
cleaning agent may damage the disc! Never write on a CD or attach a sticker
to it.
player to another audio input of an additional appliance
Environmental information
Push OPEN 2 to open the CD lid.
8
-
VOL +.............adjusts the volume
•
All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two materials: cardboard (box) and
polyethylene (bags, protective foam sheet).
•
The lens may cloud over when the unit is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD player in a warm
environment until the moisture has evaporated.
2
Open the battery compartment and insert either 2
normal or alkaline batteries.
9 ESP.....................selects between the battery powersave mode and
Electronic Skip Protection (ESP). ESP prevents
6
3
4
If necessary, clean the cigarette lighter socket
to obtain a good electrical contact.
•
•
Active mobile phones in the vicinity of the CD player may cause malfunctions.
Avoid dropping the unit as this may cause damage.
playback interruptions caused by shocks
•
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packing materials, dead batteries and old equipment.
0 MODE ................selects the different playing possibilities
! DBB....................switches the bass enhancement on and off
@ PROG .................programs tracks and reviews the program
# 4.5V DC..............jack for external power supply
$ OFF.....................switches HOLD off
RESUME............stores the last position of a CD track played
HOLD..................locks all buttons
Battery indication
Turn down the volume and connect the cassette adapter plug to
Headphones AY 3806
The approximate power level of your batteries is shown in the display.
p/LINE OUT on the set.
Disposal of your old product
•
Connect the supplied headphones to the p/LINE OUT
Battery full
jack of the player.
5
6
7
Carefully insert the cassette adapter into the car radio’s cassette compartment.
Make sure the cord does not hinder your driving.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V.
or their respective owners
Note: p / LINE OUTcan also be used for connecting
this set to your HiFi system.To adjust the sound
and volume, use the controls on the connected
audio equipment and on the CD player.
Battery low. The symbol flashes.
When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC
Decease the volume on the set, if necessary. Start playback on the set and
adjust the sound with the car radio controls.
Please inform yourself about the local separate collection system for
Batteries contain chemical substances, so they should be disposed
of properly.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
% ............................type plate
electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste. The correct disposal
of your old product will help prevent potential negative
•
Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
IMPORTANT!
consequences for the environment and human health.
Note: If your car radio has a LINE IN socket , it is better to use it for the
car radio connection instead of the cassette adapter. Connect the signal
lead to this LINE IN socket and to p/LINE OUT on the set.
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that
you cannot hear what is going on around you.
CAUTION
The type plate is located on the bottom of the set.
Use of controls or adjustments or performance of procedures other than
herein may result in hazardous radiation exposure.
Printed in China
WK0549
1
The production number is located inside the battery compartment.
CD PLAY
FEATURES
FEATURES
FEATURES
FEATURES
FEATURES
TROUBLESHOOTING
WARNING: Under no circumstances should you try to repair the set yourself as
this will invalidate the warranty. If a fault occurs, first check the points listed,
before taking the unit for repair. If you are unable to solve a problem by following
these hints, consult your dealer or service center.
Playing a CD
Playback information
Selecting a track and searching
Selecting a track during playback
Programming track numbers
Selecting different playing possibilities-MODE
RESUME and HOLD
•
•
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded
properly, NO dISCis displayed, indicating that the CD has not been
finalized. In that case, use FINALIZE on your CD recorder to complete the
recording.
When playing a CD-Rewritable (CD-RW), please note that it takes 3–15
seconds after pressing 2; for sound reproduction to start.
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
It is possible to play tracks in random order, to repeat a
single track or the entire CD, and to play the first few seconds of each track.
You can interrupt playback and continue (even after an
extended period of time) from the position where play-
back stopped (RESUME) and you can lock all buttons of
the set so that no action will be executed (HOLD). Use
the OFF-RESUME-HOLD slider for these functions.
•
Briefly press ∞ or § once or several times to skip to
the current, previous or next track.
yPlayback continues with the selected track, and
the track’s number is displayed.
The CD player has no power, or playback does not start
1
Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
ySHUFFLE : All tracks of the CD are played in
random order until all of them have been played
once.
•
Check that your batteries are not dead or empty, that they are inserted
correctly, that the contact pins are clean.
1
While playback is stopped, select a track with
∞ or §.
1
2
Push the OPEN 2 slider to open the player.
•
•
Your adapter connection may be loose. Connect it securely.
For in-car use, check that the car ignition is on. Also check player’s batteries.
Selecting a track when playback is stopped
•
•
Playback will stop if you open the CD lid.
2
Press PROG to store the track.
RESUME – continuing from where you have stopped
Insert an audio CD, printed side up, by pressing the
CD onto the hub.
1
Briefly press ∞ or § once or several times to select
the desired track. The track number is displayed.
yPROG lights up; the track number
programmed and Pwith the total number
of stored tracks are displayed.
While the CD is read, 1--:--flashes in the display.
1
Switch the slider to RESUME during playback to
The indication NO dISCis displayed
ySHUFFLE REPEAT ALL : All tracks of the CD
activate RESUME.
•
•
•
Check that the CD is clean and correctly inserted (label-side upward).
If your lens has steamed up, wait a few minutes for this to clear.
CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.
are played repeatedly in random order.
3
4
Close the player by pressing the lid down.
yRESUME is shown.
2
Press 2; to start CD play.
yPlayback starts with the selected track.
Volume and bass
yREPEAT : The current track is played repeatedly.
yREPEAT ALL : The entire CD is played repeatedly.
2
3
Press 9 whenever you want to stop playback.
3
4
Select and store all desired tracks in this way.
Press 2; to switch the player on and start playback.
yThe current track number and elapsed playing
time are displayed.
Volume adjustment
Press 2; whenever you want to resume playback.
yRESUME is shown and playback continues from
where you have stopped.
Searching for a passage during playback
The indication HOLD is on and/or there is no reaction to controls
Press 2; to start playback of your selected tracks.
yPROG is shown and playback starts.
•
Adjust the volume by using − VOL +
y
SCAN: The first 10 seconds of each of the
remaining tracks are played in sequence.
•
•
If HOLD is activated, then deactivate it.
Electrostatic discharge. Disconnect power or remove batteries for a few seconds.
1
Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
ySearching starts while playback continues at low
volume. After 2 seconds the search speeds up.
on the cd player.
•
You can pause playback by pressing 2;.
yThe time at which playback was paused starts
flashing.
2
Playback starts in the chosen mode after 2 seconds.
•
To deactivate RESUME, switch the slider to OFF.
yRESUME goes off.
The CD skips tracks
•
You can review the program by pressing PROG for more than 2 seconds.
yThe display shows all the stored tracks in
sequence.
•
To return to normal playback, press MODE repeatedly
until the display shows no active modes.
•
•
The CD is damaged or dirty. Replace or clean the CD.
RESUME, SHUFFLE or PROGRAM is active. Switch off whichever is on.
2
Release the button when you reach the desired passage.
yPlayback continues from this position.
HOLD – locking all buttons
•
You can continue playback by pressing 2; again.
ESP
No sound or bad sound quality.
You can lock the buttons of the set by switching the slider to HOLD. Now, when a
key is pressed, no action will be executed. This is of use, for example, when
transporting the player in a bag. With HOLD activated, you can avoid accidental
activation of other functions.
Notes: – If you press PROG and there is no track
selected, SELis displayed.
5
Press 9 to stop playback.
yThe total number of tracks and the total playing
time of the CD are displayed.
•
•
•
•
PAUSE might be active. Press 2;.
With a conventional portable CD-player you might have experienced that the
music stopped e.g. when you were jogging. The Electronic Skip Protection
prevents loss of sound caused by light vibrations and shocks. Continuous playback
is ensured. However ESP does not prevent playback interruptions during vigorous
running. It also does not protect the unit against any damage caused by dropping!
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not
possible.
Loose, wrong or dirty connections. Check and clean connections.
Volume might not be appropriately adjusted. Adjust the volume.
Strong magnetic fields. Check player’s position and connections. Also keep
away from active mobile phones.
– If you try to store more than 30 tracks,
FULLis displayed.
– In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or
while playing a program, searching is only possible within the
particular track.
Bass adjustment
1
Switch the slider to HOLD to activate HOLD.
yAll buttons are locked. HoLdis shown when
you press any button. If the set is switched off,
HOLD will be shown only when 2; is pressed.
6
Press 9 again to switch the player off.
•
Press DBB to switch the bass enhancement on or
off
Clearing the program
•
For in-car use, check that the cassette adapter is inserted correctly, that the car
cassette player’s playback direction is correct (press autoreverse to change),
and that the cigarette lighter jack is clean. Allow time for temperature change.
In this set ESP is default ON. It is possible to set ESP off.
•
While playback is stopped, press 9 to clear program.
yCLRis displayed once, PROG goes off,
and the program is cleared.
•
To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
y
appears if the bass enhancement is
activated.
•
Press ESP
RESUME
HOLD
y ESP disappears.
Press ESP again.
y ESP is displayed.
2
To deactivate HOLD, switch the slider to OFF.
Note: If there is no activity, the set will automatically
switch off after 20 seconds.
•
Note: The program will also be cleared if the power
supply is interrupted, or if the CD-player lid is
opened, or if the set switches off automatically.
Note: If you deactivate HOLD by switching the slider to RESUME, you will be acti-
vating the RESUME function.
ESP on ➟ ESP off ➟ ESP on
Download from Www.Somanuals.com. All Manuals Search And Download.
|