Operating Instructions
TV
■ Xelos A 42
■ Xelos A 37
■ Xelos A 32
■ Xelos A 26
■ Modus L 42
■ Modus L 37
■ Modus L 32
Neu für 5. Auflage:
Seite 3: Abbildung geändert
Seite 39: Abbildungen geändert
Seite 42: Kontrastverhältnis 1200:1 bei 37“
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control – TV functions
Sound off/on
Switch on/off - on stand by
LED indicator for current operating mode
Switch over to the RADIO mode (2
Switch over to the TV mode
Switch over to operate Recorder
Call timer list
Switch over to operate DVD-Player
Sound menu on/off
Set picture format
Select station directly;
MENU: enter numbers or letters
Call AV selection
Menu “Other functions“ on/off
PIP on/off (picture in picture)
Electronic Programme Guide (EPG) on/off
Open index;
MENU: info texts on/off
Status display on/off (3;
MENU: hide menu
Teletext on/off (3
Show/hide menu
V–/V+
Volume down/up
P+/P–
Select station up/down
PIP: Position of the PIP picture;
MENU: select/set
Station list on;
MENU: confirm/call
Green button: (3
Standard settings for picture/sound
Yellow button: (3 previous station
Red button: (3
Freeze picture on/off
Blue button: (3 programme info on/off
Select station up (1
Freeze picture off (1
Freeze picture on (1
Select station down (1
/in the Wizard: back
Direct recording (1
Freeze picture on/off (1
(1 when equipped with
(3 with DVB-T stations in GB
different function. The coloured
keys do not work as described
with DVB-T stations in GB,
Digital Recorder +, these
buttons have different functions,
see operating instructions
of the Digital Recorder
but they operate as described
on page 30 (Digital Teletext).
(2 Radio only for DVB reception
if broadcast by the station
- 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Control unit
Call the menu,
in the menu: upꢃ
Display:
red = standby
green = operation
orange = operation without screen display
(radio mode, EPG data capture
or timer recording)
Station up,
in the menu: rightꢀ
Station down,
in the menu: leftꢁ
DR+
Display DR+ : (2
white = Digital Recorder integrated,
but not active
Switch TV set on/off
to standby
(no recording, no play)
green = Digital Recorder active
(timeshift or archive playback)
red = Digital Recorder active
(archive recording)
Radio on/off (1 (back to TV mode),
switching on the radio
from standby,
(1
Radio only for DVB reception, provided the station broadcasts
this. Otherwise, switch over to an audio input.
Only for sets with Digital Recorder+
in the menu: downꢂ
(2
- 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 26
Common interface
(CI-Slot)
Headphone connection
S-VHS connection (AVS)
(i.e. for camcorders)
Video input (AVS)
Audio input right
Audio input left
Mains
switch
Antenna/cable/analogue/digital
Center audio input (analogue)
Audio input left/right (analogue)
Audio output left/right (analogue)
Socket for
power cable
Service socket
VGA/XGA input
Satellite connection socket ✳
HDMI (DVI) input
Euro-AV-
socket1
Euro-AV-
socket2
Digital audio output
Digital audio input
Component video inputs (Cb/Pb–Cr/Pr–Y)
✳
Retrofitting option for satellite tuner, see pages 44 and 45.
5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 32/37 and Modus L 32/37
Common Interface
(CI-Slot)
Headphones connection
S-VHS connection (AVS)
(i.e. for camcorders)
Video input (AVS)
Audio input right
Audio input left
Mains switch
Center Audio input (analogue)
Antenna/cable PIP tuner ✳
Audio input left/right (analogue)
or satellite antenna
(Sat tuner 1) ✳
Satellite antenna
(Sat tuner 2) ✳
Audio output left/right (analogue)
Component
video inputs
(Cb/Pb–Cr/Pr–Y)
Socket for
power cable
Antenna/cable
analogue/digital
(tuner 1)
Euro-AV-
socket 1
Euro-AV-
socket 2
Service socket
VGA/XGA input
HDMI (DVI) input
Digital audio output
Digital audio input
Antenna output PIP tuner ✳
connect to tuner 1
✳
Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.
- 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 42 and Modus L 42
Common
interface
(CI-Slot)
Audio input left
Audio input right
Video input (AVS)
S-VHS input (AVS)
(i.e. for camcorders)
Headphone connection
Mains switch
AUDIO IN
L
SD/HD-COMPONENT IN
AUDIO OUT
89352.001
5
ANT-SAT
V /350 mA
C
R
L
R
SERVICE
13/18
ANT-TV
/80 mA
HDTV IN
AUDIO DIGI TAL
AV
1
AV
RGB
2
YUV
(
)
(
)
C
b
/
P
b
C
r
/
P
r
Y
IN
OUT
HDMI DVI
VGA/XGA
V
/
Power cable
Center Audio input (analogue)
Audio input left/right (analogue)
Antenna/cable PIP tuner ✳
or satellite antenna
Audio output left/right (analogue)
(Sat tuner 1) ✳
Euro-AV-
socket 1
Euro-AV-
socket 2
Antenna/cable
analogue/digital
(tuner 1)
Service socket
VGA/XGA input
HDMI (DVI) input
Antenna output PIP tuner ✳
connect to tuner 1
or satellite antenna
(Sat tuner 2) ✳
Digital audio output
Digital audio input
Component video inputs (Cb/Pb–Cr/Pr–Y)
✳
Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.
7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you!
At Loewe, we combine the highest standards of technology, design and user
friendliness. This applies equally for TV, video and accessories.
Transporting
Only transport the unit in an upright position. Hold the set by the top and bottom
edges of the housing. The plasma/LCD screen is made of glass and/or plastic
and may break if not handled carefully. Should the LCD screen become damaged
or should the liquid crystal begin to leak, then it is imperative you wear rubber
gloves when removing the set. Should the liquid come in contact with your skin,
thoroughly rinse with water immediately.
Your new TV set is ideally equipped for the TV standard of the future - “HDTV“
(High Definition Television). With its high-resolution screen and the future-proof
digital interfaces HDMI, you have the option to view HD content with excellent
picture quality. It therefore carries the European quality mark “HD ready“.
Digital TV is steadily spreading via terrestrial reception, in the cable network and
via satellite. Loewe supplies sets equipped with DVB-T and DVB-C (DVB-C not for
UK). A digital satellite tuner (DVB-S) can be retrofitted. The DVB integrated within
the TV set is operated via the TV set menus using the remote control.
We have designed this TV set so that it is easy to operate by using menus.
Information about settings in menus is shown automatically; this enables you to
understand the context quickly.
You will find the answers to many of your technical queries in the index of your
TV. If you want to operate the TV, you can access functions directly from the index.
This saves you from having to read through detailed operating instructions and is
the reason why this operating manual only explains the most important operating
steps.
Installation options
As a desktop unit
A table stand is already mounted on the set.
As a wall-mounted unit
• Wall holder WM52 for Xelos A 26, Loewe order no. 63493A00.
• Wall holder WM53 for Xelos A 32/37 and Modus L32/37,
Loewe order no. 63493A10.
• Screen Wall Mount 1 for Xelos A 26/32 and Modus L 32,
Loewe order no. 66484B00
(Only in connection with VESA adapters, see accessories on page 44).
• Screen Wall Mount 2 for Xelos A 37 and Modus L 37,
Loewe order no. 65493B00 (Only in connection with VESA adapters, see acces-
sories on page 44).
Integrated features
The maximum equipment is described in these operating instructions. Functions
indicated by ✳ are not available in all TV sets. Menu contents may differ from the
ones shown, depending on how your TV is equipped.
You can display how your set is equipped in the “Integrated features“ index (press
the INFO button in the TV mode if no menu is displayed; the “Integrated features“
menu item is also displayed in the index before the initial letter A).
There are separate operating instructions for Digital Recorder +.
• Wall holder WM61 for Xelos A 42 and Modus L 42, Loewe order no. 64495L00.
As unit mounted on a rack for Xelos A 32/37 and Modus L 32/37
• Xelos Rack, Loewe order no. 64496.A00.
• Or Flat-TV F-Stand 3, Loewe order no. 64498A00.
As a rotating, free-standing unit mounted on a rack for Xelos A42 and
Modus L42
• Xelos 42 Rack, Loewe order no. 64496A01.
Scope of delivery
• LCD-TFT TV set or plasma TV set
• Table stand mounted
• Mains cable for LCD-TFT TV sets
• Assist remote control with 2 batteries
• Marketing and service card
• 3 cable loops for plasma TV sets
• These operating instructions
Note on the LCD screen
The TV set with an LCD screen you have purchased meets the highest quality
requirements and has been tested for pixel errors. Despite the utmost caution in
production of the displays, it cannot be totally ruled out that some of the pixels
might be defective for technological reasons. Please understand that such effects
cannot be considered a unit defect as defined by the warranty as long as they are
within the limits specified by the standard.
- 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Note on the plasma screen (Xelos A 42 and Modus L 42)
IMPORTANT!
PLASMA SCREEN TECHNOLOGY IS NOT SUITABLE FOR THE DISPLAY OF FIXED IMAGES FOR EXTENDED PERIODS OF TIME.
A fixed image displayed for an extended period can cause permanent “image retention” to appear on your Plasma screen.
Examples of fixed images include logos, video games, computer images, teletext, interactive applications and images displayed in 4:3 mode etc. If using such applications
it is advised to reduce the “Contrast” setting to minimise the risk of image retention. It is recommended that these images are not displayed for long periods.
Note: Permanent “image retention” on a Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the warranty.
You will be reminded of this warning through an on screen message after switch
on. It will not appear if it is deactivated in the menu. To do this press “Menu“
followed by selection of “Settings“ – “Miscellaneous“ –“On screen displays“
– “Automatic Info.“ then finally select “No“, alternatively it will automatically stop
appearing after the menu has been entered twenty times.
Call up the Index using the INFO button on the remote control, select “DRM
(Digital Refresh Mode)“ and start the Refresh mode by pressing the OK button. Al-
ternating full-screen colour images will be displayed now instead of the TV picture.
Run the Refresh mode for about as long as a freeze picture was displayed earlier.
End the Refresh mode by pressing any button on the remote control.
Any effects resulting from an excessively long display of a freeze frame cannot be
reversed using the “DRM“ function.
The TV set with plasma screen you have purchased meets the highest quality
requirements and has been tested for pixel errors. Despite the utmost caution in
production of the displays, it cannot be totally ruled out that some of the pixels
might not light up for technological reasons. Please understand that such effects
cannot be considered a unit defect as defined by the warranty as long as they are
within the limits specified by the standard.
For plasma screens, the emission of light decreases the longer the unit is used.
Plasma screens work by using phosphor. In certain operating conditions, this
technology may facilitate image burns. These operating conditions include:
• Lengthy, continuous display of a freeze picture (>10 minutes).
• Constant display of the same background.
• Use of a format that does not entirely fill the screen (such as 4:3) for a longer
period of time.
Once an image is burnt into the display, it is usually not possible to remedy the
problem; this situation is neither covered by the warranty nor by the guarantee. To
avoid or reduce image burns on your screen, please follow these instructions and
recommendations:
• During the first 100 hours of operation, you should display moving pictures for
the most part or freeze pictures that change frequently; these images are to fill
the entire screen.
• Use your screen in a full-screen format (16:9).
• If you use the screen as a PC monitor, always activate the screen saver.
• Switch the TV set off when it is not being used.
• Reduce the contrast and brightness as much as possible.
The “DRM“ function (Digital Refresh Mode), which can be called in this set, may
be able to eliminate or reduce minor visible effects.
Cleaning
Use only a soft, clean, damp cloth to clean the TV set, the screen and remote
control (do not use any caustic or abrasive cleaning agents).
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We have
paid a fee to authorised recyclers who will collect the packing from your dealer for
disposal, pursuant to domestic regulations. Nevertheless, we recommend you to
keep the original box and packing material for optimum protection if you have to
transport the set.
The set
Attention: The EU directive 2002/96/EC regulates the proper
way to recycle, handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of separa-
tely. Please do not dispose of this set in the normal household
rubbish.
You may return your used set free of charge at designated recyc-
ling centres or at your specialist dealer whenever you purchase a new, comparable
set. You can find out more about recycling (also for countries outside the EU) from
your local government.
9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
For your safety and to avoid unnecessary damage to your TV set, please
read and observe the following safety instructions:
•
Prevent any metal parts, needles, paper clips, liquids, wax or the like from get-
ting into the TV set through the air venting slits in the rear panel. This can lead
to short-circuits and possibly to fire. If something should get into the inside of
the TV set, pull out the plug immediately and notify customer service.
Never remove the back of the TV set yourself. Repair and servicing of your TV
set should only be carried out by authorised TV technicians.
Place the TV set on a level, firm base. The set should not protrude at the front
when installing in cabinets or shelves.
•
•
This TV set is designed exclusively for reception and reproduction of video and
audio signals.
This equipment is designed for domestic and office
environments and must not be used in rooms
with high humidity (e.g. bathroom, sauna) or high
concentrations of dust (e.g.
•
•
Only use original accessories if possible, e.g. Loewe wall holders and stands.
Never let children handle the TV unattended.
workshops). If the equipment is
used in the open air, ensure that
it is protected against moisture
Do not allow children to play in the immediate vicinity of the TV, they could
knock, shift or pull it over and injure someone.
(rain, drips, splashes, sprayed
Never leave the TV on unsupervised.
water or dew). Do not place any
containers filled with liquids or lit
candles on top of the TV.
High levels of moisture and con-
centrations of dust cause leakage
currents in the equipment, which
•
•
Do not install the TV where there may be vibrations. Vibrations can lead to
material stress.
Pull out the power and antenna cables during thunderstorms. Surge voltages
caused by lightning strikes can damage the TV through the antenna system
and the mains. Also remove the antenna and mains plugs in long periods of
absence.
can lead to danger of electric shock or fire.
The manufacturer‘s warranty is only valid for use in the specified permissible
environment.
•
•
The mains plug of the TV set must be easily accessible so that the set can be
disconnected at any time.
Lay the mains cable in such a way that it will not be damaged. The power ca-
ble may not be kinked or laid over sharp edges, not stood on and not exposed
to chemicals, the latter also applies to the device as a whole. A mains cable
with damaged insulation can lead to electric shocks and is a fire risk.
When removing the mains plug, pull the plug housing and not the cable. The
wires in the plug could be damaged and cause a short circuit the next time it
is plugged in.
•
•
If you have moved the TV set out of the cold into a warm environment, leave it
standing for about an hour since condensation may form.
This equipment must only be connected to a mains power supply which has
the same voltage and frequency as that specified on the rating plate; use the
power cable provided. Incorrect voltages can damage the equipment.
Like all electronic equipment, your TV needs air for cooling. Obstruction of the
air circulation can cause fires. Therefore the air vents on the back must always
be kept free. Please do
•
•
not place newspapers
10 cm
or cloths on/over the TV.
If the TV is placed in a
cabinet or on a shelf, lea-
10 cm
10 cm
ve at least 10 cm at the
sides and 10 cm at the
top to ensure sufficient
air circulation.
Position the set so that it
is not exposed to direct
sunlight and additional
heating from radiators.
- 10
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Remote control
Batteries
Connection
Power mains
To insert or change the batteries, press on the arrow. Slide the battery compart-
ment cover downwards and remove it. Insert LR 03 alkaline-manganese batteries
(AAA) and ensure that the + and - ends are positioned correctly.
Then push the cover back on from the bottom.
Remove the cover for the connections.
Connect the TV set to a 220-240V/50- 60 hertz power outlet. For the LCD sets,
plug the small plug of the mains cable into the mains socket on the rear of the
TV set; plug the large mains plug into a mains socket. For Plasma sets, the mains
cable is permanently connected to the set.
Antennas
Plug the antenna plug of your antenna/cable system or the room antenna for DVB-
T into the ANT-TV socket (Tuner 1).
220-240V~
ANT-SAT 50/60Hz
ANT-TV
Xelos A 26
Note on disposing batteries:
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
220-240V~
50/60Hz
ANT-TV ANT-SAT
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses.
Xelos A32/37
Modus L32/37
Setting up the remote control for operating the TV
Press the TV button
TV
R
How to operate other Loewe equipment is described on page 39.
89352.001
5
ANT-SAT
/350 mA
AUDIO IN
L
SD/HD-COMPONENT IN
AUDIO OUT
13/18
ANT-TV
8mA
V
C
R
L
R
SERVICE
HDTV IN
DVI
VGA/XGA
AV
1
AV
2
YUV
AUDIO DIGI TAL
C
b
/
P
b
C
r
/
P
r
HDMI
(
)
V
(
RGB
/
)
Y
IN
OUT
Xelos A42
Modus L42
11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
If the reception conditions are good, then a room antenna may be used for DVB-T.
Passive and active room antennas are available on the market. The power is sup-
plied for an active antenna via the antenna connection. For automatic programming
or in “TV Menu – Connections – Antenna DVB – Antenna DVB-T,“ the distribution
voltage (5 volts) is to be set correspondingly.
It may be practical to use a nondirectional antenna. If the location is outside the
normal transmitting range, then a unidirectional antenna may also be used to
improve the reception quality.
Using the conditional access module
In order to be able to receive encrypted digital stations, a Conditional Access
module (CA-module(1) and a Smart Card(1, if necessary, must be inserted into the
corresponding slot of your TV set. You can find the Common Interface slot (CI-Slot)
on the back of your TV set, see the illustration on pages 5 –7.
1. Make sure the TV set is switched off with the mains switch on the set.
2. First push the smart card into the CA module as far as it will go. Insert it so
that the side with the
You can find out more on the digital stations that can be received in your area at
your specialist dealer.
golden contact chip faces
the side of the module
printed with the supplier‘s
brand logo. Printed arrows
indicate how to insert the
card. Also follow the instal-
lation instructions included
with the smart card.
If a set was retrofitted with a PIP tuner or if this is already integrated in a set with a
digital recorder, then plug the antenna into the antenna input of the PIP tuner and
connect the PIP tuner output with the ANT-TV socket (Tuner 1). See illustrations on
page 6/7.
Set-specific equipment and retrofitting options for PIP and satellite tuners, see
pages 44 and 45.
3. Slide the CA module (1 carefully into the slot with the
contact side facing the front. When you are standing
If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite antenna
system to the ANT-SAT socket.
in front of the TV set, the logo on the CA module
must face the rear.
Make sure the module is not twisted in the process.
Do not use force.
Eject button
CA module
If a Digital Satellite Tuner 2 has been retrofitted, connect one antenna cable each,
for example from the antenna switch or from the twin LNC, to both SAT sockets.
When the module locks, the eject button is pressed
outwards.
When laying the cable, use the cable clips affixed beneath the TV set.
Replace the connection cover on the TV set.
(1
The CA module and the smart card are not included
in the scope of delivery for this set; you can usually
obtain them at your specialist dealer.
Use of the binders for Xelos A42 and
Modus L 42
The enclosed binders are intended
for holding the connection cables
together and fastening them to the
rear panel.
The binders can be opened again by
pressing on the binder latch.
Switching on
Press the mains switch. The indicator lamp on the set now turns
red (standby mode).
Switch on the set using the switch integrated in the indicator.
The indicator on the TV set lights up and turns green (indicator
lamp).
- 12
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
If you only receive one satellite...
8. In the following menu, specify whether the station search should take place in the
high and low band (“Yes“) or only in the low band (“No“).
Note: For most satellites, a station search is required in both bands.
9. For the low band and high band, the standard frequencies 9750 MHz (9.75 GHz)
and 10600 MHz (10.6 GHz) are preset.
Automatic programming
Automatic programming of the TV set is started the first time you switch it on. Follow
the menus.
Settings can be selected by pressing one of the directions ...
... and confirm your settings by pressing OK. You then go to the
next menu.
If your satellite antenna is equipped with an LNC (LNB) with a divergent oscillator
frequency, specify the corresponding frequency for low and high band respective-
ly.
Back to the previous menu.
Note: The correct display of the received frequencies in the “TV menu – Settings
– Channels – Manual adjustment“ depends upon this setting.
10. You should receive a picture with sound with the settings previously made (only
for ASTRA 1 and HOTBIRD). Then press OK.
11. In the “Pre-programming“ menu, select the factory-set pre-programming to
programme the satellite stations quickly.
1. First you have to select the menu language.
2. By pressing the OK button, you can call the menu “Connect antenna cable(s)“. If
you want to receive digital stations via satellite, then choose “DVB-S“ - confirm
using the yellow coloured key. If you also want to receive digital terrestrial
stations (DVB-T), then select “DVB-T“.
Also select “Antenna/cable (analo-
gue)“ - this way the standard analo-
gue stations can also be searched for
and saved. If you can receive digital
stations from the cable network, then
select “DVB-C“ using the yellow
coloured key.
Initial installation
Connect antenna cable(s)
Antenna cable(s) for:
Antenna/cable (analogue)
DVB-T
to antenna socket(s):
ANT TV
To ensure all stations that can be currently received are searched for and saved,
select “No“ at this point.
ANT TV
DVB-C
ANT TV
Symbol rates: The standard symbol rates 22000 and 27500 are preset. If you
would like to receive stations with different symbol rates, specify the correspon-
ding values here using the numeric buttons on your remote control.
12. Press OK to obtain an overview of the settings with which the automatic pro-
gramming is to take place.
13. Press the OK button again and the station search will start. The TV set searches
for, sorts and saves all the TV stations that can be received, according to your
settings and the antennas connected.
14. When the TV stations are saved, you will receive a corresponding message.
15. Press the OK button and the set then searches for the radio stations.
16. The TV set searches for, saves and sorts all radio stations which can be received
with your antenna system.
17. Then log on your video equipment, decoder and audio system using the connec-
tion wizard and connect these to the TV according to the connection diagram
displayed. If you want to connect other equipment later, you can find information
as of page 32.
DVB-S
ANT SAT
Connect/disconnect
Back
OK
Proceed
3. For the country-specific station sorting and for presettings for DVB-T and DVB-C,
enter the location at which the TV set is operated.
4. If you have selected “DVB-T“, you then reach the menu “Antenna
DVB-T“. If you use an active antenna, then select “yes (5V)“.
5. If you have selected “DVB-C“, you generally leave the symbol rates and modulati-
on types unchanged.
If other symbol rates are used in your cable network for broadcasting, enter the
values with the numeric buttons of the remote control. If only one symbol rate is
used, enter the same value for both symbol rates. If other modulation types are
used for broadcasting in your cable network, select them in the menu. If only one
modulation type is used, select “none“ for modulation type 2.
If necessary, ask your specialist dealer about the necessary settings for your cable
network.
You can repeat the initial installation at any time, e.g. after moving house. Call the
index using the INFO button (in the TV mode, if no menu is opened). Select the index
item “Repeat initial installation“ (you will find this listed separately before the letter
A). Press OK to start the initial installation.
6. In the “Select satellite installation“ menu, make the selection that corresponds to
your satellite antenna installation.
Note: If you have any questions on how your satellite antenna installation is
configured and on the antenna settings, consult your antenna installer or your
specialist dealer.
Note: For DVB-T stations in UK the stations are tied to “Logical Channel Numbers”
– “LCN” and sorted from 1–799. Digital station without “LCN” are stored from 800
onwards. Analogue stations are stored from1001.
7. Select the satellite the antenna is directed at, such as ASTRA1.
Station sorting
Note: not with DVB-T stations in UK.
You can change the station sorting that was carried out automatically later at any
time, see “TV menu – Settings – Stations – Change stations“.
13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Daily operation
Directing DVB-T antenna
Note: not with DVB-T stations in UK.
If you use a room antenna to receive one or more DVB-T stations that have picture
and sound interference, then you should change the location of where the antenna
is set up. To help you direct your antenna or to help you determine the most suitable
location to set up the antenna, your TV set has a display for the signal quality C/N
and the signal strength Level.
Switching on/off
Your TV is equipped with an eco-standby power supply unit. On standby, the
power consumption drops to low power. If you want to save even more electricity,
switch the set off with the mains switch. However, please bear in mind that EPG
data (electronic programme guide) will be lost, and programmed timer recordings
will not be performed by the TV.
Switching off
Consult your specialist dealer to find out which channels and frequency bands (VHF
or UHF) are used to broadcast the digital TV stations in your area.
On any one channel, several digital stations are broadcast.
If the TV set is switched on, you can switch it to standby using
the On/Off button O on the remote control or by using the
indicator field on the set. The red lamp on the TV set lights up.
If the lamp is orange, a timer recording is being made, EPG data
is being captured or radio operation without screen display is
active.
Select a TV channel
1. Call the “TV menu“ via the MENU button.
2. Use ꢀꢁ to select “Settings“, then use ꢂ to select the menu line underneath.
3. Select “Stations“, then use ꢂ to select the menu line underneath.
TV menu
Switching on the TV set
INFO
END
From standby, it is best to switch the set back on using the
On/Off button O or by using the numeric buttons of the remote
control (0 – 99).
Or use the switch integrated in the indicator on the set.
The green indicator on the TV set lights up.
Settings
Stations
Manual adjustment
Language
Parental lock Timer functions
...
4. Select “Manual adjustment“ and call the menu using OK (not possible for
MHEG-5 device versions x27/28).
Manual adjustment
Signal source
Channel
DVB-T
E 05
DVB-C Antenna/cable (analogue
Frequency
Name
Bandwidth
177.50 MHz
Or switch on the TV set with OK, you can then see the station
est
T
7 MHz
list and select a station.
C/N 96
Level 99
END
Switching on the radio
With the RADIO button on the remote control
or
with R on the control ring of the TV set, you can switch on the
radio.
5. For digital stations, select “Signal source – DVB-T“.
6. Use the numerical buttons to specify the corresponding channel number.
Depending on the channel selected and country, the system automatically sets
the corresponding bandwidth of 7 or 8 MHz. You should only change the band-
width under special circumstances - if the channel raster in your area is different
from the standard.
When you receive a digital station, the system displays the signal quality
C/N via a bar/numeric value and the signal strength via Level. The antenna‘s
direction or position is best when the largest values possible are displayed (long
bar) for the signal quality and signal strength.
If you switch off the TV set using the mains switch on the set, the indicator no
longer lights up.
If the TV set is switched off via the mains switch, then you have to first switch it
into standby mode via the mains switch and then switch it on with the remote
control or by using the indicator window on the set.
7. Direct the antenna so that the largest numerical value/bar size is reached.
8. If no signal is found in the channel set, you can start the frequency search run
by pressing the blue coloured key within the band selected.
9. Check the other channels one after another on which digital stations are broad-
cast terrestrially in your area.
For the weakest station, direct the antenna so that the maximum numerical
value/bar size is achieved.
10. After you position or direct the antenna, we recommend to search for all the
stations using the “Search wizard“ (TV menu – Settings – Stations – Search
wizard).
- 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
... via the station list
Use OK to call the station list
Changing stations
... with the P+/P- buttons on the remote control
Station list
COMP. IN
Numerical
6
7
8
9
3SAT
S–RTL
N–TV
DSF
HDMI/DVI
VGA
AVS
DVD
VCR
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
(
Stations up/down
10 TM3
11 PRO7
12 RTL 2
13 WDR 3
14 BR
15 HR
16 MDR 3
17 N 3
(
0
1
2
3
4
5
OK
When changing, the station display is visible for a few seconds.
41 ZDF
Eifellandschaft
Language/sound selection
21:00 – 21:45
21:00 - 21:45 Eifellandschaft
OK
If additional languages are broadcast with DVB stations, then the set displays
the language/sound selection under the station display. Call the language/sound
selection by using the green coloured key and select using ꢃꢂ.
END
Switch to ...
... Select station
Scan stations
Change stations
Change sorting
0
9
Select the station (if possible, the selected station will be dis-
played as a small picture)
or ...
... with the numeric buttons of the remote control
The set has a dynamic memory with 1680 station memory locations. If up to 9
stations are stored, you only need to enter one digit; up to 99 stations, two digits
are needed; up to 999 stations, three digits are needed (refer to the station list to
see how many stations have been stored).
... select with numeric buttons
call selected station
1-digit stations
Press buttons 0 – 9 for one second, and the station
changes instantly.
Or press button 0 – 9 briefly, the station then changes
after 2 seconds (the station changes immediately when
only 9 stations are saved).
Blue coloured key: sort alphabetically/according to bouquets/
numerically
long
Station list
COMP. IN
Alphabetical
CNN INT.
CAM
HDMI/DVI
VGA
AVS
DVD
DELUXE
DSF
2-and 3-digit stations
VCR
After briefly pressing the first numeric button(s), keep
the last numeric button pressed for one second, the
station then changes immediately.
Or press all numeric buttons briefly, the station then
changes after 2 seconds (the station changes immedia-
tely if up to 99 or 999 stations are saved).
4-digit stations
EUROSPRT
OK
ARD
HOT
HR
short short long
BR-ALPHA
BR3
KIKA
21:00 - 21:45 Eifellandschaft
Switch to ...
... Select letter
OK
END
Scan stations
Change stations
Change sorting
a
z
Press the four numeric buttons briefly, the channel then
changes immediately.
For an alphabetical display: Enter letters with the numeric button (like on a mobile
phone keypad), select with ꢂꢃꢀꢁ and call with OK.
For bouquet display (sorting according to broadcasting chains, only for DVB sta-
tions, not for DVB-T stations in UK): Enter bouquet number, select with ꢂꢃꢀꢁ
and call with OK.
all short
Call last viewed station (for DVB-T stations in UK)
You can switch back and forth quickly between two stations
using this button.
Digital DVB-T stations are indicated by
ۼ , DVB-C stations by ۽ and DVB-S stations by
ۻ . Encrypted stations are additionally indicated by ۩. Ask your specialist dealer about decoders or the use of a CA module and a Smart
Card for the reception of encrypted stations.
15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
TV menu
Sound
Bass
6
Basics about the Menu operation
INFO
END
Menus are called via the MENU button or via the button for special menus and
can be hidden by using these buttons or by using the END button. The menu is
displayed in the bottom section of the screen. At the top, you can see additional
information for the menu point selected. In the menus, navigate by using the cur-
sor ꢃꢂꢀꢁ. You can make settings by using ꢀꢁ. When you exit the menu,
the settings are adopted.
Set the bass tones by using ꢀꢁ.
If you want to make other sound settings, move up with ꢃ to
“Bass“ and select with ꢀꢁ, e.g. “more...“. You can also move up
further to “Sound“ by using ꢃ and select other settings in the TV
menu (such as picture settings).
TV menu
INFO
END
Example of the menu operation
Sound
OK
more ...
Bass
Treble
We shall demonstrate how to navigate with the menus using the TV menu as an
example. You can see which buttons you can use in the dark blue field on your TV
set.
Use OK to call additional sound settings.
TV menu
Sound
Loudspeaker sound
Stereo
INFO
END
Open TV menu (in TV mode).
Bass
Headphone volume Headphone sound Auto vo
...
Picture
Here you can adjust among other things: Contrast, colour, brightness,
picture adjustment, sharpness, picture format.
Select the sound setting using ꢀꢁ, e.g. “Auto volume“
and ...
TV menu
Sound
INFO
END
sound Auto volume
AV audio signal
...
Maximum volume
Balance
off
... use ꢂ to select the auto volume option.
TV menu
Sound
INFO
END
Auto volume
off
INFO
END
on
TV menu
Picture
Picture adjustment
Sound
...
Recording
Connections
Settings
Use ꢀꢁ to select “on“ and activate the auto volume.
TV menu
Sound
Auto volume
INFO
END
Select the function in the TV menu, e.g. “Sound“ (for sound
settings). Use ꢁ to move the menu points displayed on the
right into the dark blue field; use ꢀ to move the menu points
displayed on the left.
off
on
Press the END button to hide the menu.
INFO
END
Apart from the TV menu shown here, other menus can be opened in TV mode as
follows:
TV menu
Sound
Treble
Connections
Settings
Picture
Recording
...
Call the Sound menu directly.
Select the sound function below with ꢂ or OK; you will then
Quick calls for Image+✳, teletext subtitles, personal text pages,
headphone volume, scan stations and to move the picture up and
down.
see a list of the sound settings.
TV menu
INFO
END
Sound
Treble
4
more ...
Bass
Green coloured key: Call standard settings for picture and
sound.
In the sound settings, also select the function with ꢀꢁ, e.g.
“Bass“ (for increasing or reducing the bass tones).
TV menu
Using the volume control, you can also open other sound settings,
such as Sound via, Sound adjustment, Sound effects and Loud-
ness.
INFO
END
Sound
more ...
Treble
Bass
6
The key ꢃ or OK must be pressed for the duration of the volume
display for this.
To set the bass tones, use ꢂ or OK to select the setting bar
underneath.
- 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Use ꢂ to select the line below, for example “Search wizard“.
For the info system ...
For each menu point, an info text is displayed at the top of the picture to help you
with the setting. This saves you from having to refer back to the operating instruc-
tions. We shall demonstrate this using the station search option as an example:
Search wizard
Use this menu to search for stations automatically once certain settings
have been made.
If you want to search for stations with other than the displayed
settings, select the "Change settings" menu.
Call the TV menu.
Select “Settings“.
Settings
Here, you can search for the stations automatically or manually as well
as set the menu language, timer functions, parental lock, on-screen
displays, etc.
TV menu
INFO
END
Settings
Stations
Search wizard
Manual adjustment Change stations
The info text explains how you are to proceed.
Upon delivery, the TV set is configured so that the info texts are always displayed
(Automatic info “yes“). In this case, you can hide the info texts by using the INFO
button.
INFO
END
TV menu
Settings
Stations
You can also configure the TV set so that you call the info texts when needed by
using the INFO button (Automatic info “no“). You can find the setting to switch
the automatic info option on or off via “TV menu under Settings – Miscellaneous
– On-screen displays – Automatic info – yes/no“.
Recording
ections
Picture Sound
Conne
...
In this example, you can see the options available after “Settings“.
If you want to search for new stations, for example, use ꢂ to
select “Stations“ in the line below.
Stations
The menu contains the automatic station search and the manual station
setting. You can re-sort stations, enter and change station names and
delete stations.
TV menu
Settings
INFO
END
Stations
Search wizard
Parental lock Timer functions Language Mi
...
The info text indicates which settings you can make in “Stations“.
17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
For example, you want to have the TV set switch off automatically:
Select the index item “Switch off“ – “Automatic“.
For the index ...
Using the index, you can access many operational functions directly. You can also
find a great deal of information on technical terms about television. Before the
alphabetical sorting, you can find the menu language option, the DRM mode
for reducing screen burn-ins (only for TV sets with a plasma screen), the list of
features integrated into the TV set and the repeat initial installation option.
You can set your TV set to switch off to stand-by mode once or every
day at a given time.
Call the index in the TV mode (without any other on-screen
displays).
Index
Switch off
Automatic
Manual
Symbol rate*
Teletext
OK
You can select your language for operating the TV set.
Activate
Character set
FLOF
END
OK
ꢀ
ꢀ
Previous/next letter
Activate
... Select letter
P+ Page Ç/È
a
z
P–
Index
OK
Use the OK button to call “Switch off“ – “Automatic“.
Language
DRM (Digital Refresh Mode)
Integrated features
Repeat initial installation
*
Switch off today only
If you want your TV set to switch off once automatically (to stand-by
mode) select "yes" and enter the time.
Access code
Active window (PIP)
Automatic channel programming (ACP)
END
OK
ꢀꢄꢀ ꢄ
Activate
Previous/next letter
P+
P–
a
z
... Select letter
Page Ç/Èꢀ
Info on the index item selected is visible at the top of the picture. If the OK symbol
is displayed in the line selected, you can use the OK button to access the menu
directly and carry out settings or selections.
TV menu
Settings
Timer functions
Switch off today only
no
INFO
END
This is how to select the index item:
Enter the first letter using the numeric buttons on the remote
control (like on a mobile phone keypad);
or
Switch off daily One-time reminder
...
Wake
The corresponding menu “Timer functions“ is displayed (in the TV menu – Set-
use ꢀꢁ to go to the previous/next letter,
or
tings). You can now choose between “Switch off today only” and “Switch off daily“
and enter the time.
use P+/P– to scroll up or down through the pages
and use ꢂꢃ to go from line to line.
- 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Setting the sound
Volume and other frequently used sound settings
Picture settings
Open the TV menu
INFO
END
)
TV menu
Picture
Picture adjustment
Sound
...
Recording
Connections
Settings
Setting the volume
Volume
24
...
)
Select "Picture" with ꢀꢁ and selection with ꢂ.
Useꢀꢁ to mark image functions to be set.
Use ꢂ for the related selection/setting...
by using ꢃ or OK, you can call other sound settings ...
Volume
24
Sound adjustment
Loudness
Sound effects
TV menu
Picture
Colour
6
INFO
END
and select using ꢀꢁ ...
Sound adjustment
normal
Sound effects Loudness
Volume
Vo
... and use ꢀꢁ to set/select.
use ꢂ for the related selection/setting...
Picture settings: Picture adjustment, Contrast, Colour, Brightness and Sharpness.
Under “more ...“, you can find settings for Image+✳, Picture format, Move picture
up/down, Auto format, Film quality improvement DMM✳ and DRM✳ (Digital
Refresh Mode).
Sound adjustment
Pop
normal
Classic Speech
nor
... and use ꢀꢁ to make the selection/setting there.
Sound adjustment allows you to adjust the sound characteristics to the station‘s
Direct control on TV set
On page 4, you can find illustrations of the control units located on the set.
sound. The Sound effects settings allow you to expand a Dolby Pro Logic Signal to
a virtual surround signal by using “Dolby Virtual“; by using “Panorama“, you can
enhance the foundation of the stereo sound virtually for the loudspeakers.
Switching station on the TV set
Sound off/on
Station up: with the button +
Sound off;
Station down: with the button –
Sound on: Press button again or adjust volume.
Switching the radio on/off or switching over to the radio
Press R to switch the radio on or off.
Sound off
Sound on
Other sound settings:
Call the Sound menu
Additional functions via the menu
In the radio or TV operating modes, you can make settings for Volume, Brightness,
Contrast, Picture format and Stations. “Service“ is intended for the customer
service department.
INFO
END
Sound
Treble
4
more ...
Bass
use M to call the menu
use ꢀꢁ to select the sound function to be set and use ꢂ for
Direct control on TV set
Operating mode
TV
Volume
Brightness Contrast
Picture fo
the related selection ...
INFO
END
Sound
Bass
6
use – or + to select the function to be set
Direct control on TV set
g mode Volume
24
Brightness Contrast Picture format Stat
and use ꢀꢁ to select/set.
Sound settings: Treble and bass. Different menu items are displayed depending on
the connected audio device (AURO, hi-fi amplifier). Under “more ...“ you will find
the sound selection for loudspeakers and headphones, auto volume, headphone
volume, AV audio signal, maximum volume and balance.
use R for the related setting/selection
Direct control on TV set
Volume
18
use – or + to set/select.
Use M to move one level up; you can use – or + to select other functions.
19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
For the status display, the DVB station providers may offer additional selection
options for each station. Thus, the corresponding colour key or the TEXT button is
displayed:
TV
In initial installation and daily operation, the TV set is in TV mode. This is also the
case when none of the other modes of operation, such as EPG, Teletext, PIP or
Radio, have been selected.
Each of these operating modes has a separate menu with separate functions for
the coloured keys. Call the menu via the MENU button.
Red: channel selection for multi-channel providers.
Green: language/sound selection.
Yellow: time selection.
How the coloured keys work in TV mode
Note: The coloured keys do not work as described below with DVB-T stations in
UK, but they operate as described on page 31 (Digital Teletext).
Blue: protection of minors.
DVB subtitles.
Red: the TV picture freezes. Pressing this button again starts the
picture moving again. If your TV set is already equipped with a
digital recorder, the DR archive is called.
If you press one of the coloured keys during the status display or you press the
TEXT button, the related selection menu is displayed.
The status display subtitles refer only to the “DVB subtitles“ and are not provi-
ded by all stations. The options you see depend on the particular station (many
stations broadcast subtitles via teletext).
Green: Call personal settings/factory settings for picture and
sound, save picture and sound settings as personal settings.
The status display is displayed automatically when a new programme begins with
options different to the previous one.
INFO
END
Standard settings
Call up personal settings
OK
Call up factory settings Store as pers
OK
Activate
Notes:
•
Yellow: call last station viewed. You can switch back and forth
quickly between two stations using this button.
In the sound mode, Mono! means that you have switched manually from
stereo to mono, for example.
Blue: call programme info.
•
The selection menus are only available as long as the status display is display-
ed. You can call them again at any time by pressing the END button on your
remote control.
1
ARD
Eifelland
14:30 - 15:15
Calling the index
Calling the index
You can select your language for operating the TV set.
END
Programme info
Detailed info
14:43
OK
Index
Detailed info (teletext) Channel preview (tele
OK
Language
DRM (Digital Refresh Mode)
Integrated features
Repeat initial installation
*
Access code
Active window (PIP)
Automatic channel programming (ACP)
Show status display
Show/hide status
END
1
ARD
14:42
Language/sound selection
Eifellandschaft
14:30 - 15:15
Stereo
Alarm time 20:00
Sleep timer 23:00
OK
ꢀꢄꢀ ꢄ
Activate
Previous/next letter
P+
P–
a
z
... Select letter
Page Ç/Èꢀ
In the line above, you can see the name of the station and the sound mode.
Displayed below are additional options (Time, Sound mode, Alarm time and Sleep
timer) that can be selected in the “TV menu – Settings – Miscellaneous – On-
screen displays“.
You can find more information on the index on page 18.
- 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Calling additional functions
For a recorder that is logged in, you can find the following menus in the
“Recording“:
Select additional functions such as Image+✳, Teletext subtitles,
Personal teletext pages, Headphone volume, Scan stations and
to move the picture up and down.
Recording wizard - to programme new timer recordings
• Via EPG
• Via teletext (VPT) • Manually
You will find further information about timer recording on page 33.
INFO
END
Additional functions
Teletext subtitles
Timer list
OK
Personal teletext pages Headphone volume
Here you will find a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme new
recordings.
Call timer overview
If timer recordings have been programmed, you will see when
which station is recorded here.
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.
Timer list
Fri 12.09./14:12
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
TEXT
END
Detail
New recording
Change
Delete
INFO
Select picture format
The TV set sets the best picture format automatically when Auto
format is switched on. If you want to set a different format,
press this button until the desired format is selected or select the
format with ꢀꢁ.
Antenna DVB
• Antenna DVB-T • Antenna DVB-S✳
You can find more information on pages 13 and 14.
Digital Link Plus
Picture format
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
16:9
4:3
Panorama
Cinema Zoom
In sets with an LCD screen, you can switch the panorama picture over to distorti-
on-free representation. Dark margins are then visible on the left and right of the
picture.
Switching over: Keep the M button on the set pressed, at the same time press the
”Picture format” button on the remote control briefly.
Resetting: Press the same button combination again.
Miscellaneous (connections)
•
Set AV norm for the connections manually (if it is not recognised automatical-
ly).
•
•
“Assign audio digital signals“ to one of the AV sockets.
“Allow switching voltage“ to display the signals of the connected device imme-
diately on the screen via Euro AV during playback.
Move picture up/down
•
•
RGB insertions at AV2 to play back RGB signals at all station storage locations.
Select decoder stations and set sound encoding.
To make picture subtitles visible, you can use ꢃꢂ to move
the picture up or down with the picture formats “Panorama“,
“Cinema“ and “Zoom“.
Under “Settings“ you will find the following functions:
Stations
Here you can search for and store new stations automatically or manually. With
“Change stations“, you can rearrange and delete the stations and change station
names (not for DVB-T stations in UK).
Note: for DVB-T stations in UK you can switch back and forth quickly between two
stations using this button
TV menu
Call up the TV menu
• Search wizard • Manual adjustment • Change stations
INFO
END
TV menu
Picture
Picture adjustment
Sound
...
Recording
Connections
Settings
You will find a description of the picture and sound settings on page 19. The TV
menu offers other options for recording, connections and settings of the TV set.
21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Parental lock
DVB subtitles
You can lock the TV from “immediatly“, “daily“ for a certain period of time or
“agerelated“ for DVB programmes with age restrictions.
Here, you determine the PIN to enter if you want to watch locked programmes.
If the station provides DVB subtitles, then you can have the TV display them
permanently or suppress their display. You can also select between subtitles “for
translation“ or “for impaired hearing“.
Timer functions
1. Call the “TV menu“ via the MENU button.
You can have your TV switch off at pre-programmed times or wake you/remind you
with radio or TV. If you are not present at the time, a safety prompt makes sure the
TV switches off again after 5 minutes.
• Switch off today only • Switch off daily • One-time reminder
• Wake up Mon-Fri • Wake up Sat • Wake up Sun
• Wake up with ✳ • Wake up signal volume
2. Select the “Settings“ line and confirm using OK.
3. Select the “Miscellaneous“ line and confirm using OK.
4. Select the “DVB subtitles“ line and confirm using OK.
DVB subtitles
Subtitles off
for impaired hearing
OK
END
for translation
INFO
Language
If “your“ menu language is not set, you have to select the “Language“ menu in a
language that you do not understand. Therefore here is a simple way to set the
right menu language:
Note: If you have selected “Subtitles off“, then the set generates an on-screen
display when subtitles are available.
1. Press the INFO button (index), select the first listing (this is above A).
2. Call the language selection by pressing the OK button.
3. Now select the desired language and confirm it by pressing the OK key.
4. Hide the menu again with the END button.
By using the END button, you can open the status display and you can display the
subtitles again by using the TEXT button.
•
•
Call the status display by pressing the END button, if it is not yet displayed.
When the status display is visible, press the TEXT button.
Select the desired language and confirm using OK. The presetting changes for
the current programme.
Miscellaneous (settings)
On-screen displays
You can set the duration and position of the station and status display, define the
content of the status display and switch the automatic info texts on or off:
• On-screen display position • On-screen display time • Programme title •
Sound mode • Time • Alarm time • Sleep timer • Automatic info
•
•
Which subtitle languages can be selected depends on the provider.
The automatic shortlist is determined by the menu language and the selection
made in the “DVB subtitles“ settings menu.
Time and date
•
By pressing the END button, you can hide the menu again.
If you receive teletext, the set registers the time and date. These are required for
timer recordings, timer functions and EPG. If you do not receive teletext, then you
have to enter the date and time; you should not switch off the set using the mains
switch since the settings will then be lost.
Note: DVB subtitles are not available when digital teletext is being displayed.
DVB software
Update of DVB software via satellite ✳.
DVB subtitles
• Subtitles off • Subtitles for the Hearing Impaired
• Subtitles as translation for foreign language programmes
DVB character set
• Western European • Polish • Standard.
✳ Only for sets with DVB-S
- 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Removing the CA module
Searching for new software
If you want to carry out a manual search for new software, proceed as follows:
1. Switch the TV set off with the mains switch.
2. Remove the cover from the back of the set
on the upper left.
3. Press the eject button at the module slot;
the module is unlocked.
1. Call the TV menu using the MENU button.
2. Confirm the “Settings“ using OK.
3. Confirm the “Miscellaneous“ using OK.
4. Select “DVB software“ and press OK.
4. Remove the module from the set.
CA module
Update digital TV software
Current version: V3.x.x
Inserting a new CA module
After you insert a new CA module (CI module (1 is
displayed in the menu) and switch the TV set on, the
following dialogue is displayed:
You can search for a new software version with OK.
5. If you start the search using OK, the set checks if there is a new software
Autom. station search
version available.
Your TV set has detected a new CI module. This requires a station
search for all new receivable stations.
6. If there is a new version available, the set generates an on-screen message.
After you press the OK button, the system starts the wizard to carry out the auto-
matic station search.
Check the proposed search parameters and let the set search for new stations.
Calling the CA module menu
Update digital TV software
Current version: V3.x.x
New version: V3.1.0
Here you can call up information on the inserted conditional access module and
the smart card. To do this, use the MENU button to call the TV menu, select the
line “Settings“, “Miscellaneous“ and then the entry “CI module - xxx“ (in place of
“xxx“ stands the name of the provider which is output by the smart card. The term
CI module (1 displayed in the menu refers to the CA module. The content of this
menu depends on the particular supplier of the CA module.
Downloading software
1. If you press OK in the dialogue above, you can decide whether you want to
download the new software immediately, when you switch off the set or not at
all. We recommend you always carry out the update of the digital software. This
is the only way to ensure your set is always up to date.
Note: This menu is only available for digital stations.
2. If you do decide to update, the software is initialised on your set and you are
informed of the status with a grey bar.
Do not switch your set off during this time. This process may take up
to one hour. You will be informed when the process is completed.
Installing new DVB software
To ensure your DVB-S receiver is always performing at the state of the art, newly
developed software versions are made available from time to time; these are
broadcast via satellite and can be automatically installed on your set (only possible
via ASTRA1).
3. After the software is updated, you will be asked to switch your TV set off and
back on again using the on/standby switch.
If the update was not carried out, you will be asked several times when you switch
on the set whether you want to carry out this update.
Software is recognised automatically
The set can determine whether a new software version is available. This occurs at
night when your EPG is automatically updated. For this, your TV set has to remain
in the standby mode (do not switch off using the on/off button on the set).
If a new software version has been found, the set will indicate this with an on-
screen message the next time the set is switched on: You can decide whether or
not you want to download the new software.
Confirm using OK, so that the new software can be loaded and installed via
satellite. Continue as set out in the “Downloading software“ section
(1 CA module has established itself as the usual market name.
This cannot be taken into consideration in the menu yet.
23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Image+ demo mode
Image+
In order to show the way Image+ works, a “Demo mode“ is integrated.
In “Demo mode“, the current picture is divided into two parts. The left half of the
picture is shown in “normal“ mode, the right half in the Image+ optimised mode.
Image+ is a picture improvement specially developed by Loewe, which delivers a
sharper, lifelike and colour-fast picture richer in detail and contrast.
Image+ is not integrated in the Xelos A26/32 sets.
Image+ off
Image+ on
Image+ menu
Call the menu “Additional functions“.
INFO
END
Additional functions
Image+
off
Teletext subtitles
...
Personal teletext pages
Use ꢂto move to the corresponding selection/setting....
Additional functions
Image+
INFO
END
on
off
Demo
and use ꢀꢁ to select/set and use....
The demo mode can be closed by pressing on any button on the remote control.
Additional functions
Image+
INFO
END
OK
on
off
Demo
OK
Activate
to activate.
In the Image+ menu, the functions Image+ “on“, “off“ and “Demo“ can be set.
The Image+ settings can also be opened via the TV menu – “Picture“.
Call up TV menu.
Use ꢀꢁto mark "Picture".
INFO
END
TV menu
Picture
Picture adjustment
Sound
...
Recording
Connections
Settings
Use ꢂꢄfor associated selection and mark "more…" with
ꢀꢁ.
TV menu
Picture
INFO
END
OK
rpness more ...
Picture adjustment
Contrast Colour Brig
Call up "more…" with OK and mark "Image+" with ꢀꢁ.
TV menu
Picture
INFO
END
rpness Image+
on
Picture format Move picture up/down Auto forma
...
Useꢄꢂꢄto access the associated selection.
Set as described in the Image+ menu above.
The standard setting at delivery of the set is Image+ “on“.
- 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – PIP
Select the station of the TV picture (main picture)
The bar/frame has to be white. If not, press the green coloured
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T stations in
UK, but they operate as described on page 30 (Digital Teletext).
Picture in picture displays are possible if the set has an analogue PIP tuner or a di-
gital satellite tuner in addition to the analogue TV cable tuner. You can have a PIP
tuner or a digital satellite tuner retrofitted. Set-specific equipment and retrofitting
options for PIP and satellite tuners, see pages 44 and 45.
key. Then select the station as usual.
Note: With UK sets, you switch over from the green to the white
bar/frame by using the PIP key. By pressing on the PIP key once
more, PIP is switched off.
If there is no other tuner installed, you can use PIP (AV-PIP) when playing a video
recorder or DVD player.
For a retrofitted PIP tuner, the following PIP displays are possible: Main picture
analogue – PIP picture analogue, Main picture digital – PIP picture analogue.
The following is not possible: Main picture digital – PIP picture digital, Main
picture analogue – PIP picture digital.
For “Split screen,“ the PIP picture is displayed on the right side of the screen. Both
pictures share the screen in two equal halves. For the “Small PIP“ setting, a small
picture is displayed in the TV picture.
41 ZDF
Eifellandschaften
21:00 – 21:45
The green bar/frame indicates that the control commands have an effect on the
PIP picture. The white bar/frame means that the control commands have an effect
on the main picture. Use the green coloured key to switch between the PIP
picture and the main picture, for example to change stations.
PIP scan in the PIP picture
The bar/frame has to be green. If not, press the green co-
loured key.
Start scanning the stations using the blue coloured key. The
bar/frame turns blue.
The frame or bar between the pictures is green for the time being.
Show/hide PIP picture
The stations now change automatically. Stop scanning the stations by using the
blue coloured key. The bar/frame turns green again.
PIP picture as freeze picture
The bar/frame has to be green. If not, press the green co-
loured key.
If you press the red coloured key, the PIP picture freezes. Press
again - moving picture.
Interchanging PIP picture/TV picture
The bar/frame has to be green. If not, press the green co-
loured key.
Interchange the pictures by using the yellow coloured key.
Selecting the station of the PIP picture
The bar/frame has to be green. If not, press the green co-
loured key. Then select the station as usual.
1
ARD
Der Wilde Westen
Eifellandschaften
21:15 – 22:15
21:00 – 21:45
41 ZDF
1
ARD
Der Wilde Westen
21:15 – 22:15
25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – PIP
Functions in the PIP menu
In the PIP menu, you can set the PIP type (small picture or split screen) and the
position of the small picture.
Position of the PIP picture
Move the PIP picture with the arrow keys to a corner of the TV
picture. In this case, the frame around the PIP picture has to be
green, and there should not be any other displays visible on the
screen.
Call the PIP menu (PIP must be active, green bar/frame)
TV menu
Settings
INFO
END
PIP
Type
ꢀ
ꢀ
mall PIP Split screen
Sm
Switch to split screen:
Setting the PIP type
You can have the PIP picture displayed as a small PIP or split screen.
You can have the PIP picture displayed on the right hand side of the screen. Both
pictures share the screen in two equal halves. You will see a coloured vertical bar
between the pictures
Switch to small PIP:
Call the PIP menu (PIP must be active, green frame)
Select “Type“ and then “Split Screen“.
Select “Type“ and then “Small PIP“
TV menu
Settings
PIP
INFO
END
Type
Small PIP
TV menu
Settings
PIP
Type
Split screen
INFO
END
ꢀ
ꢀ
mall PIP Split screen
Sm
For the small PIP, you will see a coloured frame around the PIP picture.
- 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – EPG
When receiving digital terrestrial and digital satellite stations, you may find that
two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If
you call the EPG menu in the EPG mode by using the MENU button, then select
“Station selection,“ you can select the duplicate station and deactivate it by using
OK).
EPG - Programme guide
EPG is an electronic programme guide. With this system, you can easily find the
programmes that interest you (sorted according to day, time, stations and topics).
You can mark programmes and programme recordings.
Depending on whether you are receiving analogue stations by cable/antenna or
digital stations, you will have different programme guides.
A wizard is activated the first time you use EPG (not with DVB) which guides you
through the necessary settings. Then run the data capture (see next page).
You have direct access to the selection lines above to pre-select the day, the time,
the station and the topic.
Blue coloured key: Call Select date/time/stations/topics
EPG (Electronic Programme Guide)
Fri 10.09./14:14
Date
Time
Stations
Topics
Sat 11.09.
06:00
all
all
06:00-06:20 ZDF
06:00-06:30 RTL
06:00-06:25 Kabel 1
06:00-06:25 N3
06:00-06:30 BR
06:00-06:30 WDR
Sun 12.09. Mon 13.09.
Using the EPG
Switch EPG on/off
Die Blobs
Wunderbare Jahre
Dennis
Extra en español (5)
Goal. Speak English, Play Football
Lokalzeit Südwestfalen
EPG (Electronic Programme Guide)
Fri 10.09.
Fri 10.09./14:14
Date
Time
Stations
Topics
now
soon 14:00 15:00 16:00 17:0
all
all
24 Kabel 1
06:00-07:10 SuperRTL Infomercials
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)
14:00-14:20 9LIVE
Comedyserie - Kandidaten mit gewissen Fehlern
OK
13:20-14:15 Kabel 1
13:30-14:15 H3
Die Waltons
ARD-Buffet
Reisetraum
13:55-14:20 Kinderkan Blaubär & Blöd (37)
14:00-14:15 ZDF
14:00-15:00 RTL
14:00-15:00 Sat 1
14:00-15:00 Pro7
14:00-14:30 N3
heute - in Deutschland
Das Strafgericht
Zwei bei Kallwass
Das Geständnis - Heute s...
DAS! ab 2
24 Kabel 1
END
Change to programme list MENU
14:00-14:20 WDR
Familienserie - Sturzflug
Die kleinen Strolche (10)
Use ꢂꢃ to select the menu line for the date, time, stations or topics. Use ꢀꢁ
to select within the menu line.
If, for example, you are looking for the next news, select today’s date, “Soon“
under Time, “All“ under Stations and “News“ under Topics.
Then you get a list of all news programmes in the programme list below.
OK
TEXT
P+
P–
END
Detail
Page Ç/È
View
Record
Select date, ... , topics MENU
select time
0
9
...
The programme guide menu is divided into two areas: at the top, you can make the
settings for the programme list (date, ..., topics); on the bottom, the programme list
is displayed. Use the blue coloured key to switch between the two areas to make
your selections.
All programmes currently running are listed initially in the programme list. With the
ꢂꢃ buttons, select the programme you want to watch and switch over with the
OK button.
Brief information is shown below the programme list for some programmes. If more
detailed information is available, you can call it using the TEXT button.
Use P+/P– to scroll up or down through the pages of the programme guide.
In the selection lines for date and time above, you will see the time change when
scrolling; when you scroll further, the date also changes.
When the “Time“ line is selected, you can enter the time as of which the pro-
grammes are to be displayed; use the numeric buttons on your remote control to do
this. Always enter four digits, such as 0900 for 9 a.m.
EPG (Electronic Programme Guide)
Fri 10.09./14:14
Date
Time
Fri 10.09.
soon
Stations
Topics
all
News
Show Hobby Sport Child Kn
15:00-15:15 Das Erste Tagesschau um drei
15:00-15:05 hr-fernse hessen aktuell
15:00-15:15 ZDF
heute - Sport
16:00-16:05 SÜDWEST Baden-Württemberg Aktuell
16:00-16:15 Das Erste Tagesschau um vier
24 Kabel 1
Nachrichten - News
END
Change to programme list MENU
If you want to mark one of these news programmes, return to the programme list
using the blue coloured key, select the desired news programme by using ꢂꢃ
and mark this by using OK.
If programmes are displayed which have not yet started, you can mark these with the
OK button. The TV set then switches automatically to this station at the given time.
27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – EPG
In front of the programme’s title, the system places an ۪. This station is switched
later to this programme when the set is switched on. If the TV is off, it switches on
again automatically at the beginning of the marked programme if this has been
set in the EPG menu. If you are out, a security prompt prevents the TV set staying
on unattended.
Before leaving the upper selection lines using the blue coloured key, select a
specific line. If you have switched back to the programme list, you can change this
menu line using ꢀꢁ without having to leave the programme list.
First, all stations are marked with the ۪ symbol so that their data is display-
ed in the programme guide (precondition: provided EPG data is broadcast for
the respective station). Stations indicated by ۬ are analogue terrestrial/cable
stations, stations indicated by
ۼ are DVB-T stations, stations indicated by ۽ are DVB-C stations and stations indicated by
ۻ are DVB-S stations. These stations are available for evaluation in the programme guide.
Select the stations you want to omit from the programme guide one after another
and deactivate each one by using OK. The ۪ symbol is removed.
Programming recording for recorders
Data capture
The programme marked using the ꢂꢃ buttons can be prepared for recording by
pressing the red coloured key. In the following menu, confirm the timer data or
change them as required. Then a red dot is set in front of this programme in the
EPG programme list as an identification (if timer data is being transferred to the
recorder, no red dot is set). If you select this programme, you can delete it from
the timer using the red coloured key (if the timer data has been transferred to a
recorder, the timer has to be deleted there).
After these settings or after each time the set is switched off using the mains
switch, the data must first be collected, before switching on the set.
To do this, select the station you have defined as a provider and leave the TV
set switched on for about one hour or switch the set to the standby mode. After
about two minutes in standby mode, the indicator on the set turns orange. The
data acquisition begins and lasts about 1 hour. When data acquisition is termi-
nated, the indicator turns red again. The data are also automatically captured
between 2 a.m. and 5 a.m. when the TV is switched to standby.
A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + analogue)
in the EPG menu.
EPG menu
Call EPG menu
INFO
END
Note: If the TV set is switched off using the mains switch or the mains plug is
pulled out, all EPG data are lost.
EPG menu
Select provider
OK
Station select Timer list
Data capture Switch
If, for example, you cannot receive any analogue EPG providers or if you only use
DVB, you should set the data capture to “on (only for DVB)“.
You will find the following settings in the EPG menu:
• Select provider • Station selection • Timer list • Data capture
• Switch on TV when marked
Switch on TV when marked
You can have the TV switched on automatically from standby at the beginning of
the marked programme. If you are not present at the time, a safety prompt makes
sure the TV switches off again after 5 minutes.
Selecting providers and stations
If you want to change the provider for analogue TV reception (the station which
transmits EPG data) to have other stations evaluated, you can do this under
“Select provider“.
Select “Select provider“ and call this menu using OK. If the station you want to
switch to is not listed in the “Select provider“ list, then use the yellow coloured
key to start the automatic search for stations with EPG data. This takes a while.
Or, if you know the station that transmits EPG data, press the blue coloured key
to compile manually. Select the provider in the station list and adopt it by using
OK and return to the provider selection using ꢅ.
Select the provider in “Select provider“ and adopt it using OK. Then a station list
search is performed. The stations offered by the provider are displayed in a list.
- 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Teletext
In Multiple pages, scroll using ꢀꢁ. You can see which multip-
les pages can be called in the bottom menu line.
Analogue Teletext
Teletext transmits information such as news, weather, sports, programme previews
and subtitles.
Zeitplan
Fußball
10 11 12
–
+
1
2
3
4
5
6
7
8
9
Teletext on/off
Call contents page 100
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Call the TOP table
The TOP table is a general list of teletext. You can only call the
table for stations that use the TOP operating system.
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Wird auch der Nahverkehr teurer? . . . . . . . .
121
Australien: Keine Zugeständnisse . . . . . . . . 122
TOP table
. .
532
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . .
Gesellschaft . . .
Lotto/Toto . .
500
530
666
Übersicht
Wetter
Vorhersage
. . 204
tagesschau
OK
Wetter. . 213
Städte
Regional
Reisen
Wirtschaft. . . . . . 700
Sport 1
TV Guide
. . 500
Inhalt
tagesschau
–
+
ARD heute
int. Städte
Page selection
. . 530
ARD morgen
Biowetter
666
FS-Sendungen
. . 700
END
TV Guide 2
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are divided into topic groups and topics.
After switching on the teletext, up to 3,000 pages are stored for Xelos and 1,500
pages for Modus for fast access.
more . . .
OK
View
Use ꢂꢃ to select the topic group.
Select the topic column using ꢁ.
Select the topic with ꢂꢃ and display page with OK.
Page selection with the coloured keys
The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to the
last line show you which coloured keys you can use to scroll to topic groups and
topics.
Enter the page number directly
Red: back to the previously seen page (not in FLOF)
Green: on to the next page (not in FLOF)
Displaying teletext pages
Stop self-turning pages (HOLD)
Yellow: to the next topic (only in TOP and FLOF)
Blue: to the next topic group (only in TOP and FLOF)
Zoom page: top part - bottom part - normal size (press button
several times)
Other page selection options:
TV picture on/off (Split Text)
Select one page number specified on the page by using
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
ꢂꢃ(Page Catching)
Index
> 101
Formel 1: Schumacher erneut vorne . . . . . . . 213
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Lotto/Toto . .
666
Wirtschaft. . . . . . 700
Inhalt
OK View
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
tagesschau
–
+
Page selection
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport . . . . . . . 200/600
TV Guide . . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Lotto/Toto . . . . 666
Wirtschaft . . . . 700
call
Inhalt
tagesschau
–
+
Page selection
29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Teletext
Programme timer recordings
A video and/or DVD recorder must be connected and logged in in the connection
wizard.
Call the programme pages of the current station in teletext mode using the Direct
recording button . Scroll to the teletext page in which the programme to be recor-
ded is listed if necessary. Select the programme you want to record by with ꢂꢃ
and confirm with the OK button. For “Timer data,“ select the VCR or DVD recorder
and whether you want to record once or a series of times. Confirm with OK.
Digital teletext operation (only for MHEG-5 device versions x27/28)
In the UK, the teletext for DVB-T stations is transmitted as per the MHEG-5 stan-
dard (standard of the Multimedia and Hypermedia Expert Group). It contains text,
graphics, functions and links.
The operation of these menus depends on the particular provider. Normally after a
station is changed, the provider broadcasting the digital teletext makes an intro-
ductory offer for this service on the screen via menu selection. Follow these notes.
If no message appears telling you how to switch to digital teletext after switching
to another station, press the TEXT key. If a selection for DVB subtitles is available,
this item must be hidden before.
Teletext menu
Display teletext menu
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
INFO
END
Menu
cording
Settings
Newsflash
Re
Reveal
...
Personal text pages
Here you will find functions such as
Depending on the provider’s respective offer, you can use the ꢂꢃꢀꢁ buttons
and the OK button, the coloured keys, the END/TEXT button and sometimes
even the numeric buttons.
If you want to close the digital teletext, just select a different station using the
P+/P– buttons or follow the menu prompts on the screen.
•
“Newsflash“, this is an on-screen display of the latest messages (e.g. page
111).
•
•
“Reveal“ concealed information, e.g. VPS pages in the station preview pages.
Programme wizard for recording via teletext.
In the settings, you will find menus to define the station preview pages, subtitle
pages and personal text pages, and menus to set the character set selection as
well as HiText graphics.
Notes:
•
•
Digital teletext is not available when DVB subtitles are being displayed.
If a timer recording is programmed at the TV-set, at the start time of the recor-
ding the digital teletext mode is switched off automatically
- 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Radio
Radio menu
Radio
Call radio menu
You can only receive radio stations via DVB. If you do not have any DVB radio
reception, you can play a sound signal from an external device using the TV set via
the sound/AV inputs.
INFO
END
Radio menu
Sound
Treble
Stations
...
Timer functions
Use the RADIO button on the remote control or the R on the
control ring of the TV set to switch the radio on or off.
In the radio menu, as in TV mode, you can set the sound, search for radio stations
and store them (automatically or manually – not with DVB-T mode in UK), delete
stations from the list, rearrange them or change names and set the switching off
and alarm functions.
Radio:
8
DLF
Numerical
9
HR-INFO
S
S
S
S
S
S
S
S
S
AUDIO IN
AVS
10 MDR INFO
11 MDR FIGA
12 NDR KULT
13 SWR1
AV2
AV1
1
2
3
4
5
6
7
8
B5 AKTL
BAYERN 1
BR4 KLSK
S
S
S
S
S
S
S
S
14 SWR2
EPG - Programme guide
For the DVB radio stations, you can also use the programme guide if the station
currently active supplies data.
15 WDR3
16 WDR5
SUNSHINE
ROCK ANT
ANTENNE
DLR
17 OESTER 1
18 MDR JUMP
19 JAZZ RAD
20 BLUSAT20
S
S
S
OK
DLF
Call Programme guide
18:00 - 18:10 Nachrichten
OK
END
Switch to ...
Scan stations
0
9
Select station
Screen off/on
Previous station
Change sorting
...
MENU
EPG
You can see a station list of the radio stations or with DVB-T in UK the station
logo. In this case you can call up the station list by using the OK or INFO key.
Station list is sorted by LCN.
You can see a station list of the radio stations. Digital DVB-T stations are indicated
by
ۼ , DVB-C stations by ۽ and DVB-S stations by ۻ . Encrypted stations are additionally indicated by ۩. Ask your specialist dealer about decoders or the use
of a CA module and a Smart Card for the reception of encrypted stations.
When time and title are sent by the marked station these data are displayed at the
bottom of the station list.
You can switch off the screen with the red coloured key. The LED indicator on
the set changes from green to orange. You can switch the screen display back on
by using the OK key, red or blue coloured keys, by using RADIO, MENU or
END on the remote control or by using R on the control ring of the TV set.
Station switching with dark screen: by using – or + on the control ring of the TV
set or by using the remote control P– and P+ or by using the numeric buttons (for
DVB-T operation in UK, the buttons may be configured differently by the provider).
The sound menu can be called in the radio mode using the L button.
31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV
cable is available)
Login and connect equipment
You have logged in and connected all connected equipment in the initial instal-
lation. If you want to connect other equipment or disconnect equipment, call the
connection wizard.
Switch on the test station on the VCR or insert a recorded tape and start playback.
In some video recorders the station must be switched on by activating the modu-
lator.
Call up the TV menu
Then call the AV selection on the TV set with 0 AV. Select the menu item “VIDEO“
in the AV selection and call using OK.
Select “Connections“
To prevent “normal“ TV stations being found in the search, pull out the antenna
plug from the antenna input of the VCR temporarily (the cable to the antenna
system).
If you cannot see the test station or playback from the cassette, the VCR is
transmitting on a different channel. You then have to search for the station or set
it manually.
Select the submenu line
Select “New devices/modifications“ and ...
Call using OK.
1. Call the TV menu with the MENU button.
2. Select the “Settings“ menu item with ꢀꢁ.
State what equipment you want to connect. State whether a piece of audio equip-
ment is to be connected (more details as of page 35). The connection wizard then
shows you which sockets you should connect this equipment to. Then connect the
equipment to these sockets according to the connection diagram.
Connecting video/DVD recorders
3. Select the line below using ꢂ and use ꢀꢁ to select “Stations“.
4. Select the line below using ꢂand select “Manual adjustment“ using ꢀꢁ
and call this menu using OK.
5. Enter channel “E30“ under the “Channel“ menu item (“Antenna/cable (analo-
gue)“ select in this menu above, if necessary).
6. Start search with the blue coloured key.
7. When the station has been found, change the name if needed, confirm with
OK and save with the red coloured key.
In addition to the connection via the Euro-AV sockets, you also have to connect
the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD
recorder to the TV set. The antenna signal is then available to the video/DVD
recorder and the TV set.
Note: Use Euro-AV cables with right-angled plugs as shown.
8. A list of the stored stations is displayed.
9. Select 0 (VIDEO) here and overwrite this station storage location using the red
coloured key.
10. Hide the menu again using the END button.
AV1
ANT-TV
Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on the same
channel as the VCR station, you have to change the transmitting station on the
VCR and search for the VCR station on the TV again.
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
AERIAL
ORTIE
G
OUT
L
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
D
R
RF OUT
- 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Video playback
There are several ways to see the picture and hear the sound of the VCR, DVD
player/recorder or camcorder on your TV:
1. You can usually use the Euro-AV sockets on the TV set and on the VCR. For
camcorders or digital cameras, use the AVS sockets on the right of the TV set.
DVD players/recorders and SetTopBoxes may have HDMI or component sockets
for video and audio transmission. In this case, use the corresponding sockets
on the TV set.
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be done
with the EPG programme guide (not with DVB-T in UK), teletext or manually. Call
the “Timer list“ menu with the button and press the red coloured key for the
“Recording wizard“. Select whether you want to programme the recording via
EPG, teletext or manually. You also have the option to programme recordings
directly from the EPG programme guide or teletext.
Note: Copy-protected programmes are not output to the Euro-AV sockets for legal
reasons.
When playing back from a video recorder using Euro-AV socket and Digital
Link Plus (or a comparable system from another manufacturer), the picture
from the VCR is shown at the current channel location.
When playing back from another VCR, camcorder or digital camera, use the AV
selection or the station list (OK) to select the AV socket/the device to which
the VCR is connected.
Video recorders transmit a switching voltage during playback, which the
TV can evaluate (can be activated in the connection wizard or in the “TV
menu – Connections – Miscellaneous – Allow switching voltage“ - set to
“yes“). Then the picture of the video recorder is shown during playback at the
current station location.
When you have connected the Euro-AV socket to a recorder which has Digital
Link Plus or a comparable system from a different manufacturer, the timer data of
analogue terrestrial stations are transmitted from the TV to the recorder. The recor-
ding quality SQ or EQ is transmitted for DVD recorders, in addition to the station,
date and time. The recording is then controlled by the recorder and the recorder
tuner is used for reception of the station. The recording data are not saved in the
timer list of the TV set. You will only find the timer data in the recorder.
If you want to record from digital stations, the TV tuner is used and the recorder is
controlled by the TV set. Then the station is locked during the timer recording.
If you have connected a Loewe video recorder with Digital Link to the Euro-AV
socket (without Digital Link Plus) and you are using the timer programming of the
TV, the TV receiver is always used, for terrestrial stations as well. The TV controls
the recording.
2. You can use the antenna connection between the VCR and the TV without a
Euro-AV socket. The sound is only transmitted in mono. Select the first menu
item, e.g. VIDEO, in the AV selection.
You have to set the recorder to the AV input (signal source) to which the TV set is
connected.
Then the station on the TV set is locked during the timer recording.
Digital Link must be switched on on the recorder. Read the operating
instructions of your Loewe recorder for more information.
Calling AV inputs in the AV selection:
Call AV selection
AV selection
VIDEO VCR
OK
DVD AVS
VGA
HDMI/DVI
COMP. IN
Select AV device/socket (or VIDEO if the video recorder has been
connected only via the antenna socket) and use ...
Use only Euro-AV cables, which are completely wired, otherwise Digital Link/Digital
Link Plus will not work.
Another advantage of Digital Link is that you can install the recorder in a conce-
aled place (e.g. in a rack). You can control the recorder with the TV set.
If you have a Loewe recorder with both systems, you can use all the advantages.
The advantages of Digital Link Plus are used for the timer recording; the advan-
tages of Digital Link for concealed installation of the recorder.
to call.
Now you will see the playback from the connected AV device.
Calling AV input via the station list
Call the station list with the OK button in TV mode.
In the numeric and alphabetical sorting, you will always find the AV sockets at the
top of the list.
33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
Assignment of digital audio inputs and
outputs
Audio input “AUDIO DIGITAL IN“
The digital audio signal is applied at the “AUDIO DIGITAL OUT“ socket of the TV.
For example, you can connect an external digital audio amplifier or the Loewe
Auro system here.
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN“ and a coaxial
digital audio output “AUDIO DIGITAL OUT“. If you are using an external digital
surround amplifier for sound reproduction, you have to feed digital audio signals
to the TV, e.g. from the DVD player.
An analogue audio signal from the TV set or another sound source which is recei-
ved at one of the Euro-AV sockets of the TV set is converted into a digital signal
(PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from external
analogue AV sources to PCM is not possible if the TV’s loudspeakers are used as
a centre channel. In this case, connect your audio amplifier additionally to the TV
(AUDIO OUT L/R) with a cinch cable and switch the audio amplifier to analogue
audio input.
AUDIO DIGITAL
AV2
IN OUT
The digital TV sound or the digital sound of a connected auxiliary device is only
audible via an external digital audio amplifier (e.g. Loewe Auro system).
Surround Amplifier
DVD
MULTICHANNEL AUDIO OUT
I
PREOUT
LEFT CENTER
REAR
LEFT
FRONT
UX-
I/O
AUX1 INAUX OUT A
FL
SL
C
FR
L
L
DIGITAL AUDIO
PCM/MPEG2/AC3/
STEREO OUT
VIDEO OUT
DIGITAL
IN
MAINS
II
DIGITAL
OUT
TO TV-I/O
SUB
SR
R
R
RIGHT SUBW. RIGHT
REAR FRONT
R
L
(CVBS)
VIDEO OUT
S-VID(EYO/C)
DIG OUT
OUT
OPT OUT
AUDIO
Connect the output socket of the DVD player (DIG OUT) to the TV‘s “AUDIO DIGI-
TAL IN“ socket with a cinch cable.
In the connection wizard, specify that audio transmission is to be digital. Specify
that the digital sound is to be assigned for example to the Euro-AV socket 2 to
feed the digital sound to the digital audio output of the TV set and via this to the
external audio amplifier. Further information about this can be found on page 36.
- 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
set “AUDIO DIGITAL OUT“ to the “DIGITAL IN“ input of the Preceiver using a cinch
cable. Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver
using the L-Link cable (provided with the Preceiver). Switch on the TV set and the
Preceiver. Via the L-Link, the TV recognises whether the Preceiver is connected.
Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set
the listener/speaker distances and adjust the speaker levels. Please consult the
Preceiver manual.
If you want to listen to the sound via the TV speakers temporarily, call the Sound
menu, select “Sound via“ and then “TV“. If you want to listen to the sound via the
Loewe Auro system, select “AURO“ under “Sound via“.
Connecting Loewe DVD Preceiver Auro 2216
PS and Individual Sound loudspeaker system
You can play audio signals from the TV or DVD player in cinema quality with these
components. In addition to the subwoofer illustrated below the Individual Sound
system includes up to 5 loudspeakers for the front , center and surround reproduc-
tion. The centre signal can be reproduced alternatively by the TV speakers.
Connect the cubic socket on the DVD Preceiver to the “Master“ cubic socket on
the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug the
white plug (without kink protection) into the cubic socket on the subwoofer. For
TV as a centre loudspeaker, connect “AUDIO IN C“ on the TV set to “PRE OUT C“on
the DVD Preceiver using a cinch cable. Connect the digital audio output of the TV
Loewe Flat-TV
AV2-SCART
CENTER
DIGITAL OUT
Loewe Individual Sound
SERVICE
ON
Power OUT
R
L
Surr.
OFF
R
C
L
Front
Bass Intensity
Min.
0
Max.
Phase
Center to
Loewe
Auro
Line IN
Sat
TV
180
Right Subw. Left
Surr.
Slave
Front
Right Center Left
Y
PREOUT
C
AUX1 IN AUX OUT AUX
2
System connector
Master
L
R
L
L
TO TV
DIGITAL
IN
Pb
Pr
230V~50/60Hz
DIGITAL
OUT
TV
EXT
SL
LFE
SR
R
R
COMPONENT
VIDEO OUT
12V / 15mA
L-LINK
35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers. The
sound for the analogue amplifier is transmitted via the AUDIO OUT L/R connec-
tions of the TV to the audio amplifier. Connect the amplifier with two cinch cables.
Specify under “Type of amplifier“ whether the analogue amplifier is a stereo or
surround amplifier.
If it is a surround amplifier, also specify whether or not the TV speakers are to be
used as centre loudspeakers. Connect the centre output of the amplifier to the
centre output of the TV using a cinch cable, if necessary.
Connecting other audio amplifiers or active
speakers
In the connection wizard, select “HiFi/AV amplifier“ under “Equipment selection:
audio component“. The connection wizard allows configuration of different
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the
operating instructions for the audio amplifier to be connected.
Select “Digital“ under “Audio transmission“ for digital audio amplifiers. Con-
nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio
input of the digital amplifier.
Note: do not use the centre loudspeaker connection on the amplifier; instead use
the pre-amplifier centre output.
Assign the digital audio input to the socket through which the corresponding pic-
ture is transmitted (e.g. AV2 if a DVD player is connected there). Then the digital
sound is passed to the digital audio output of the TV set and fed to the external
audio amplifier via this.
AUDIO IN AUDIO OUT
C
L
R
Specify which sound formats can be decoded with your digital amplifier (Dolby
Digital, MPEG, dts).
Specify under “Type of amplifier“ whether the digital amplifier is a stereo or
surround amplifier.
If it is a surround amplifier, specify whether or not the TV loudspeakers are to be
used as centre loudspeakers. Connect the centre output of the amplifier to the
centre output of the TV using a cinch cable, if necessary.
PRET
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
Note: do not use the centre loudspeaker connection on the amplifier; instead use
the pre-amplifier centre output.
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
If you want to listen to the sound via the TV loudspeakers temporarily, call the
Sound menu using the L button, select “Sound via“ and then “TV“.
AUDIO IN
C
AUDIO DIGITAL
OUT
AV2
When connecting active speakers, select “Active speakers“ in the connection
wizard under “Audio equipment selection“. The sound for the active speakers
is transmitted via the AUDIO OUT L/R connections to the active speakers. Make
connections to the active speakers using the cinch cables.
Make the audio settings on the TV set when active speakers are connected. When
using an external audio amplifier, make the audio settings on the audio amplifier.
PRET
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
- 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
HDMI (DVI) connection
VGA/XGA connection
You can connect a PC or a Set Top Box (STB) and therefore use the
The HDMI connection (High Definition Multimedia Interface) allows
digital picture and sound transmission via a connecting cable, e.g.
from Loewe DVD Recorder Centros 2102/2172 HD. The digital
TV screen as an output device.
Connect the PC/STB to the VGA/XGA socket on the TV using a VGA
cable.
picture and sound data are transmitted without data compression
and therefore lose none of their quality. In the equipment connected, no analogue/
digital conversion is necessary, which might also have lead to losses in quality.
DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI
adapter cable. This is possible because HDMI is based on DVI and is downwardly
compatible. That means that the digital video signals are transmitted via HDMI
- no audio signals are transmitted, though. In addition, both use the same copy
protection method HDCP.
When connecting to a PC, first set one of the following screen resolutions on your
PC.
800x600 60Hz (SVGA)
1024x768 60Hz (XGA).
When a Set Top Box is connected, set the following screen resolutions according
to the options of the Set Top Box:
SDTV: 720x576i (PAL), 720x480i (NTSC),
720x576p, 720x480p.
HDTV: 1280x720p, 1920x1080i.
Select the VGA/XGA connection in the AV selection.
Connect the set with an HDMI connection using an HDMI cable (type A, 19-pin)
to the HDMI socket of the TV set. Log in the HDMI connection in the connection
wizard (TV menu - Connections - New devices/modifications).
Call AV selection
AV selection
VGA
Select the HDMI connection in the AV selection.
Call AV selection
OK
AVS
HDMI/DVI COMP. IN
VIDEO VCR
DVD
Select VGA socket and use ...
to call.
AV selection
OK
VGA HDMI/DVI
COMP. IN
VIDEO VCR DVD AVS
Select HDMI/DVI socket and use ...
to call.
Start the connected device.
Set geometry
Start playback on the device connected with HDMI connection.
Call the TV menu using the MENU button, select “Geometry“ using ꢀꢁ and set:
If the picture is not positioned correctly, you can move the picture horizontally and
vertically here so that it fills the whole screen. You can also set the phase position
so that the picture appears in the best possible quality.
The set automatically recognises and sets the best possible format for the video.
If transmission occurs via a DVI/HDMI adapter cable, then you can feed in the
appropriate analogue audio via the audio input sockets AUDIO IN L/R on the TV set.
The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital
audio signal in the connection wizard (TV menu - Connections - New devices/mo-
difications) and assign it to the HDMI/DVI socket. You can make the other settings
for the audio amplifier as described for digital amplifiers on page 36. The digital
audio signal of the DVI audio source is fed in at the AUDIO DIGITAL IN socket on
the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the external
amplifier.
Setting colour standard
Call up Image settings (TV menu – Image). Select “Colour standard“ using ꢀꢁ
and make your selection.
The colour standard for a connected PC is RGB.
In Set Top Boxes, you usually set Ycc as a colour standard. Other formats such as
Ypp or RGB can also be output. Please consult the operating instructions of the
device connected.
Set geometry: as described for VGA/XGA connection.
If the wrong standard is selected, you will recognise this by the wrong colours in
the display.
37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Sound from PC or Set Top Box
Component video connection
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital
audio signal in the connection wizard (TV menu - Connections - New devices/mo-
difications) and assign it to the VGA/XGA socket. You can make the other settings
for the audio amplifier as described for digital amplifiers on page 36. The digital
audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV.
Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the amplifier.
If you have a DVD player/recorder with Component OUT connec-
tions, you can connect it to the SD/HD-COMPONENT IN sockets
of the TV instead of to the Euro-AV sockets. The connecting cable
with three cinch plugs each transmits picture information. The
playback is of a better quality than via the Euro-AV socket.
You need another cinch cable for the analogue sound transmission. Connect the
analogue audio outputs of the DVD player to the AUDIO IN L/R sockets on the TV
set. The sound is reproduced via the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio ampli-
fier connected to the TV, make a connection between AUDIO DIG OUT of the DVD
player and AUDIO DIGITAL IN of the TV set.
Log in the component/device in the connection wizard:
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital
audio amplifier is also connected. You can make the other settings for the audio
amplifier as described for digital amplifiers on page 36.
Set the signal at the component input in the connection wizard: Set to “Automa-
tic“ first. If the signal is not reproduced when playback is started, consult the ope-
rating instructions of the DVD device connected to find out what screen resolution
is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
Call AV selection
AV selection
COMP. IN
OK
DMI/DVI
VIDEO
VCR DVD
VGA HDMI/DV
AVS
Select COMP. IN sockets and use ...
to call.
Start playback on the connected device.
Set Geometry and Colour standard: as described for VGA/XGA connection.
- 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Set remote control
The specified key combination must be pressed (approx. 5 s) until one of the LEDs
flashes twice. The remote control can be set for the different devices as follows:
Operate Loewe DVD player and recorder with
the remote control
Use the remote control to operate one of the DVD players
Device
Hot keys
Press the DVD button, the display above will light up for approx.
5 seconds.
Loewe TV (Chassis L2650)
Loewe Centros 11x2
+
+
+
+
+
+
+
¾
Use the remote control to operate a recorder
Press the REC button, the display above will light up for approx.
5 seconds.
Loewe Centros 12x2/21x2
Loewe ViewVision DR+
Loewe ViewVision 8106 H
Loewe Auro 2216 PS / 8116 DT
Loewe Xemix 6222 PS
¾ꢀ
¾ Factory setting
Return to using the remote for the TV
¾
Press TV button.
Functions for the Loewe DVD recorders (Centros 12x2, 21x2, ViewVision DR+)
Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT)
TV Sound off/on
Sound off/on
Switch on/off - on stand by
Switch on/off - on stand by
LED indicator for current
operating mode
TV-Radio Digital
Switch over to operate TV set
LED indicator for current operating mode
short: TV Radio Digital;
long: Auro FM/AM-Radio
Switch over to operate TV set
Switch over to operate Recorder
Switch over to operate Recorder
Switch over to operate DVD-Player
TV Sound menu
Switch over to operate Auro
Select sound format
Timer recording menu;
timer recording list menu
Sleep timer
Set TV picture format;
RADIO: Mono/Stereo
STOP: Title list;
DISC: select chapter/title;
RADIO: select stored station;
MENU: enter digits
PLAY: Edit thumbnail;
CARD: Photo-, Music-, Film-Mode
ViewVision DR+:
STOP: Select station directly
MENU: enter numbers or letters
Timeshift Mode
ViewVision DR+:
STOP: Call AV selection
STOP: Call AV selection
(AV1-AV4,DV,TV)
DISC: Repeat A-B;
RADIO: FM/AM-mode
ViewVision DR+:
PLAY: skip 15 Sec.
Card Reader operation
ViewVision DR+: “Home” menu
DISC: Repeat; RADIO: display
RDS name/frequency of station
Select external audio source
PIP (picture in picture)
DISC: menu bar
MENU: context help
User interface of loaded DVD
MENU: original and playlist
Info;
PLAY: menu bar
DISC: User interface of loaded DVD
DISC: Status display;
RADIO: station table;
MENU: hide menu
Show/hide menu; MENU: close window
Show/hide menu
MENU: hide menu
V– / V+ Volume down/up
P+/P-
V– / V+ TV Volume down/up
P+/P–
ꢃꢂ
DISC: chapter up/down;
MENU: select up/down
ꢀꢁ
DISC: search back/forward;
MENU: select left/right
PLAY: Next chapter;
STOP: Select station up/down
DISC: next/previous chapter;
RADIO: station forward/back
MENU: select/set
Status display (TV, DVD)
MENU: confirm the menu selection
DISC: Title/Chapter overview;
RADIO: station table;
MENU: confirm menu selection
Green button:
Title/Chapter selection
Green button: ShowView menu
Red button: new chapter marker
Yellow button: Zoom
Yellow button: Zoom
Blue button: Set marker
Blue button: DISC:
short: Set marker;
long: Marker search
Red button: DISC: camera position
Playback
Playback
DISC: short: next chapter/title;
long: search forward
RADIO: short: fine tuning forward;
long: search forward
DISC: short: beginning of
chapter/title previous chapter
long: search back
PLAY: press short:
Start of current chapter/previous chapter
PLAY: press long: search back
PLAY: Press short: next chapter
PLAY: Press long: search forward
PAUSE: Press short: slow motion forward
RADIO: short:
fine tuning back long: search back
PAUSE: press short: slow motion back
Stop
Stop
Record
no function
Pause; single frame; slow motion
Pause /single frame
39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Remedy
The “Recording“ menu point is not displayed in the
TV menu.
No video or DVD recorder logged in
Log in the video or DVD recorder in the connection
wizard and connect the device.
“Connections“ cannot be called in the TV menu
(deactivated)
A time recording is in progress
Wait until the timer recording has ended or delete the
timer.
The control of the Loewe video recorder and the
timer do not work or do not work properly.
a) The Digital Link function is not activated or not
possible in the recorder.
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
a) Activate Digital Link in the recorder (see operating
instructions of the video recorder).
b) Connect the Euro-AV cable.
c) Log in recorder.
General problems with connecting external equip-
ment via an AV input
a) The device is not logged in to the connection
wizard or is connected differently than is shown in
the connection diagram.
a) In the connection wizard (TV menu – Connec-
tions – New devices/modifications), compare the
connection diagram with the actual installation and
connect as shown, if necessary.
b) The AV norm is set incorrectly.
c) The AV signal is set incorrectly.
b) Set the norm correctly.
c) Set the AV signal correctly.
If “Automatic“ is set for AV norm or AV signal, this
can lead to errors for signals which do not conform
to the norm. Then the norm and the signal are to be
set according to the specifications in the operating
instructions of the external device.
A decoder connection does not function or is faulty.
a) The signal is not decoded because the wrong deco- a) Follow the instructions in the connection wizard
der stations are selected in the connection wizard.
b) The sound is missing in decoder mode because the
wrong decoder sound is assigned in the connection
wizard.
again (TV menu – Connections – New devices/mo-
difications) and select the corresponding decoder
station.
b) Follow the instructions in the connection wizard
again and select the right audio source (decoder,
TV or autom.), see instructions of the decoder.
All menus appear in the wrong language.
Menu language has been set incorrectly.
Set your menu language:
Press the INFO button in TV mode (index). Select the
first index item and call it by using OK. Then select the
language and confirm with OK.
- 40
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Remedy
Digital Link Plus does not function.
a) Euro-AV cable is not fully wired (pin 10 not wired).
b) Some recorders can only adopt stations during the
initial installation of the TV set.
a) Replace the Euro-AV cable.
b) Restore the recorder to the as-delivered state (see
recorder’s operating instructions).
c) All or some of the terrestrial and cable stations are
stored on station storage locations • 99.
c) Rearrange the terrestrial and cable stations so
that they lie between 1 and 99.
Various characters are displayed incorrectly in the
teletext.
The wrong character set is set in the teletext menu.
Set the right character set: Teletext menu - Settings
- Character set: standard or the appropriate character
set.
No sound via external digital audio amplifier
a) The external digital audio amplifier does not
support the selected sound format (Dolby Digital,
dts, MPEG).
a) Set PCM stereo on the DVD player in the sound
selection. For DVB stations, switch language/
sound selection (green coloured key) to Stereo
on the TV set in the status display (END).
b) Connect Digital-Out from the TV set to a Digital-In
of the external digital audio amplifier and select
the appropriate input to this.
b) TV set and external digital audio amplifier are not
connected.
41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
General data
Type
Modus L 32
66449x87
66446x27
84,4x59,1x9,5
84,4x62,7x26,0
19,0
Modus L 37
66415x87
66415x27
99.1x67.6x9.3
99.1x70.2x25.8
20.4
Modus L 42
66414x87
66414x27
107.0x74.2x11.5
107.0x76.5x29.0
36.5
Order no., versions DVB-T/C CI
MHEG-5 versions DVB-T CI
Set dimensions without stand (ca. cm WxHxD)
Dimensions with stand (ca. cm WxHxD)
Set weight without stand (ca. kg)
Set weight with stand (ca. kg)
Display
Picture diagonal (cm)/picture format
Resolution
Contrast ratio
21,0
22.4
39.5
HD-LCD technology
80/16:9
HD-LCD technology
94/16:9
HD-Plasma technology
106/16:9
1024x1024
3000:1
1400 cd/m2
>170°
1366x768
1200:1
1366x768
800:1
Luminance
500 cd/m2
178°
500 cd/m2
170°
Angle of viewing horizontally/vertically
Power consumption (IEC 62087)
in operation (watt)
85/100
< 3
100/115
< 3
300/315
< 3
in standby (watt)
Ambient temperature (Celsius)
Relative humidity (not condensing)
Barometric pressure
5º – 35º
20 – 80%
800 – 1114 hPa (0 – 2000 m above sea level)
Type
Xelos A 26
66416x87
–
66416x27
–
68.4x50.7x10.8
68.4x56.1x24.0
12.3
Xelos A 32
66418x87
66418x47
66418x27
66418x28
84.4x62.2x9.7
84.4x62.8x26.3
19.0
Xelos A 37
Xelos A 42
66421x87
66421x47
66421x27
66421x28
107.0x75.0x11.2
107.0x78.5x26.3
39.6
Order no., versions DVB-T/C CI
Versions DR+ DVB-T/C CI
MHEG-5 versions DVB-T CI
MHEG-5 versions DR+ DVB-T CI
Set dimensions without stand (ca. cm WxHxD)
Dimensions with stand (ca. cm WxHxD)
Set weight without stand (ca. kg)
Set weight with stand (ca. kg)
Display
66419x87
66419x47
66419x27
66419x28
99.1x69.2x9.3
99.1x71.9x26.3
20.4
14.3
21.0
22.4
43.2
HD-LCD technology
66/16:9
HD-LCD technology
80/16:9
HD-LCD technology
94/16:9
1366x768
4000:1 (dyn.)
500 cd/m2
170°
HD-Plasma technology
106/16:9
1024x1024
3000:1
1400 cd/m2
>170°
Picture diagonal (cm)/picture format
Resolution
Contrast ratio
1366x768
1200:1
1366x768
1200:1
Luminance
500 cd/m2
170°
500 cd/m2
170°
Angle of viewing horizontally/vertically
Power consumption (IEC 62087)
in operation (watt)
65/70
< 3
85/100
< 3
100/115
< 3
300/315
< 3
in standby (watt)
Ambient temperature (Celsius)
Relative humidity (not condensing)
Barometric pressure
5º – 35º
20 – 80%
800 – 1114 hPa (0 – 2000 m above sea level)
- 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Connections
Jack 3.5mm
Mini-DIN (AVS) Video IN
Electrical data
Chassis name
Headphones 32- 2000 ohm
L 2650
220 V -240V/50- 60 Hz
41 MHz to 860 MHz
1680
Y/C (S-VHS/Hi 8)
CVBS (VHS/8mm)
CVBS (VHS/8mm)
Power supply
Tuner VHF/UHF/ cable Hyperband 8 MHz
Station storage locations
TV standards
Cinch (yellow) Video IN
Cinch (white/red) Audio IN
IEC socket 75 Ohm/5 V/80 mA
F socket 75 Ohm✳ 13/18 V/350 mA
EURO-AV 1 Video IN
L/R
B/G, I, L, D/K, M, N
DVB-T, DVB-C✳, DVB-S✳
SECAM, PAL, NTSC,
NTSC-V, PAL-V (60Hz)
Mono/Stereo/Dual-channel
Nicam B/G, I, L,
Virtual Dolby
Antenna/cable/analogue PIP✳/DVB-T/C
ANT-SAT
Y/C (S-VHS/Hi 8)
CVBS (VHS/8mm)
CVBS (VHS/8mm)
Colour standard
Sound standard
Video OUT
Y/C (S-VHS/Hi 8)
Audio IN
Audio OUT
EURO-AV 2 Video IN
L/R
L/R
Rated audio power for Xelos
Rated audio power for Modus
Analogue teletext
Page memory for Xelos
Page memory for Modus
2 x 20 watt
2 x 15 watt
TOP/FLOF Level 2.5
3000
Y/C (S-VHS/Hi 8)
CVBS (VHS/8mm)
RGB, YUV
1500
MHEG-5
Video OUT
CVBS
Digital teletext (only for MHEG-5 version x27/x28)
Y/C, (only with SVHS Link Plus)
Audio IN
Audio OUT
L/R
L/R
Cinch
2 x Cinch Audio IN
2 x Cinch Audio OUT level adjustable in active loud speakers
Audio IN max. 2Vrms
Centre
L/R
L/R
Cb/Pb signal
Cr/Pr signal
Y signal
Digital audio
Cinch
Cinch
Cinch
Cinch
Cinch
COMPONENT IN:
COMPONENT IN:
COMPONENT IN:
Digital Audio IN (SPDIF)
Digital Audio OUT (SPDIF)
Digital audio
HDMI/DVI Digital Video/Audio IN type A 19pin
VGA/XGA VGA/XGA IN
Digital video and audio
PC/STB video signal
Service/L-Link
Mini-DIN
SERVICE
✳
Set-specific equipment and retrofitting options for PIP and satellite tuners, see
pages 44 and 45.
43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Wall holders and stands
Refer to the notes on the installation options on page 8.
VESA adapter
The VESA adapter offers you the possibility of also using your TV set for other
VESA-compatible fastening devices.
PIP tuner
The PIP tuner enables picture in picture displays (PIP) for analogue terrestrial and
cable reception.
You can retrofit either this PIP tuner or a digital satellite tuner. The PIP function is
possible with both retrofit versions.
Loewe order no. 89725B00 (VESA LCD; Xelos A 26, Xelos A 32, Xelos A37, Modus
L 32, Modus L 37)
Note: Please only use the original Loewe VESA adapter for your TV set and use the
VESA-compatible fastening devices recommended by Loewe (see pages 8).
You can find the retrofitting options for your set in the table on the next page.
Loewe order no. 89442080
Loewe DVD players and recorders
The DVD players and recorders from Loewe are characterised by form and colour,
which match Loewe TV sets, adapted user guidance and technology. A combinati-
on of the two devices forms a system which offers many advantages.
Digital Satellite Tuner
You can have your TV set retrofitted with the digital satellite tuner. By using this
tuner, you can receive DVB-S stations.
The digital satellite tuner is completely integrated in the TV set (physically and
logically) and is operated by the remote control/menu control of the TV.
When you retrofit your TV set with the digital satellite tuner, your TV set automati-
cally has the PIP function.
Loewe audio system Auro and the active speaker system Individual
Sound
The interplay of a Loewe TV with a Loewe audio system and a Loewe speaker
system creates an excellently coordinated home cinema system. Advantages are
high operating comfort, attractive design and adapted technology.
You can retrofit either this digital satellite tuner or a PIP tuner.
You can find the retrofitting options for your set in the table on the next page.
Loewe order no. 89361056
DVB-S Twin sat tuner
If your TV set is equipped with the digital recorder, you can have it retrofitted with
an integrated DVB-S twin sat tuner.
The integrated PIP DVB-T/C tuner is exchanged for the DVB-S twin sat tuner.
You can find the retrofitting options for your set in the table on the next page.
Loewe order no. 89443080
Subject to delivery options.
- 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Retrofitting options
The following table shows the equipment and retrofitting options for the individual device versions.
Device version Equipment
Item no. version
PIP-Tuner (1
Digital
single SAT tuner (1
Digital
twin SAT tuner (2
Modus L 32 DVB-T/C CI
Modus L 32 DVB-T CI
Modus L 37 DVB-T/C CI
Modus L 37 DVB-T CI
Modus L 42 DVB-T/C CI
Modus L 42 DVB-T CI
Xelos A 26 DVB-T/C CI
Xelos A 26 DVB-T CI
66446x87
–
–
–
–
–
–
–
–
–
°
°
66446x27 MHEG-5)
66415x87
–
–
°
–
°
–
66415x27 (MHEG-5)
66414x87
°
–
°
–
66414x27 (MHEG-5)
66416x87
–
–
°
–
66416x27 (MHEG-5)
66418x87
Xelos A 32 DVB-T/C CI
Xelos A 32 DR+ DVB-T/C CI
Xelos A 32 DVB-T CI
°
•
–
°
–
66418x47
°
–
66418x27 (MHEG-5)
66418x28 (MHEG-5)
66419x87
–
–
Xelos A 32 DR+ DVB-T CI
Xelos A 37 DVB-T/C CI
Xelos A 37 DR+ DVB-T/C CI
Xelos A 37 DVB-T CI
•
–
–
°
•
–
°
–
66419x47
°
–
66419x27 (MHEG-5)
66419x28 (MHEG-5)
66421x87
–
–
Xelos A 37 DR+ DVB-T CI
Xelos A 42 DVB-T/C CI
Xelos A 42 DR+ DVB-T/C CI
Xelos A 42 DVB-T CI
•
–
–
°
•
–
°
–
66421x47
°
–
66421x27 (MHEG-5)
66421x28 (MHEG-5)
–
–
Xelos A 42 DR+ DVB-T CI
•
–
• already integrated
can be retrofitted
cannot be retrofitted
°
–
(1 You can retrofit either a PIP tuner or a digital satellite tuner.
(2 The integrated PIP tuner is exchanged for the Twin Sat tuner.
45 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Service addresses
Loewe Austria GmbH
Kjaerulff 1 A/S
Loewe Italiana SRL
DSV TRADING SA
Parkring 10
C.F. Tietgens Boulevard 19
5220 Odense SØ, Denmark
Tel. +45 - 66 13 54 80
Fax +45 - 66 13 54 10
Email [email protected]
Largo del Perlar, 12
Plac Kaszubski 8
1010 Wien, Österreich
Tel.: +43 - 810/0810-24 (zum Ortstarif)
E-Mail [email protected]
37135 Verona (VR), Italia
Tel. +39 - 045 82 51 619
Fax +39 - 045 82 51 622
Email [email protected]
81-350 Gdynia, Polska
Tel. +48 - 58 - 6 61 28 00
Fax +48 - 58 - 6 61 44 70
Email [email protected]
International Dynamics
Australasia Pty Ltd.
129 Palmer Street
Richmond 3121, Victoria, Australia
Tel. +61 - 3 - 94 29 08 22
Fax +61 - 3 - 94 29 08 33
Email [email protected]
Gaplasa S.A.
PL Trading (pz 2004) Ltd.
27, Aliat Hanoar St.
Givataiim 53401, Israel
Tel. +972 - 3 - 57 27 155
Fax +972 - 3 - 57 27 150
Email [email protected]
Service Center Loewe
Conde de Torroja, 25
28022 Madrid, España
Tel. +34 - 917 48 29 60
Fax +34 - 913 29 16 75
Email [email protected]
ul. Verkhnaya Maslovka, d. 29
125083 Moscow, Ɋɨɫɫɢɹ
Tel. +7 - 495 612 50 43
Fax +7 - 495 612 47 10
Email [email protected]
Kjaerulff 1 AB
Loewe Opta Benelux NV/SA
Uilenbaan 84
2160 Antwerpen, België
Tel. +32 - 3 - 2 70 99 30
Fax +32 - 3 - 2 71 01 08
Email [email protected]
Loewe Opta France S.A.
13 rue du Dépôt,
Mirage Holdings Ltd
Flamingo Complex, Cannon Road
Qormi, Malta
Tel. +356 - 22 - 79 40 00
Fax +356 - 21 - 44 59 83
Email [email protected]
Ridbanegatan 4, Box 9076
21377 Malmö, Sverige
Tel. +46 - 4 06 79 74 00
Fax +46 - 4 06 79 74 01
Email [email protected]
Parc del l‘Europe, BP 10010
67014 Strasbourg Cédex, France
Tel. +33 - 3- 88 79 72 50
Fax +33 - 3- 88 79 72 59
Email [email protected]
BaSys Czech & Slovak s.r.o.
Stará Vajnorská 17/A
831 04 Bratislava, Slovakia
Tel.: + 421 2 49 10 66 18
Fax: + 421 2 49 10 66 33
Email: [email protected]
Telion AG
Rütistrasse 26
8952 Schlieren, Schweiz
Tel. +41 - 44 732 15 11
Fax +41 - 44 732 15 02
Email [email protected]
SOMARA S.A.
Kjaerulff 1 OY
Artturinkatu 2
20200 Turku, Finland
Tel. +358 - 2 284 1600
Fax +358 - 2 284 1601
Email [email protected]
377, Rue Mustapha El Maani
20000 Casablanca, Morocco
Tel. +212 - 22 22 03 08
Fax +212 - 22 26 00 06
Email [email protected]
Jadran Trgovsko Podjetje
Partizanska cesta 69
6210 Sezana, Slovenija
Tel. +386 - 57 31 04 40
Fax +386 - 57 31 04 42
Email [email protected]
HADJIKYRIAKOS & SONS LTD.
Prodromou 121, P.O Box 21587
1511 Nicosia, Cyprus
Tel. +357 - 22 87 21 11
Fax +357 - 22 66 33 91
CableCom AS
Gneisveien 12
3221 Sandefjord, Norge
Tel. +47 - 33 48 33 48
Fax +47 - 33 44 60 44
Email [email protected]
LinnSight Ltd.
PO Box 8465
KA 7 2YF Prestwick, UK
Tel. +44 - 12 92 - 47 15 57
Fax +44 - 12 92 - 47 15 54
Email [email protected]
Email [email protected]
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul, Türkiye
Tel. +90 - 216 634 44 44
Fax +90 - 216 634 39 88
Ing. Ivo Tietz
Dolní nám. 9
746 01 Opava, ýesko
Tel.: +420 553 624 944
Fax: +420 553 623 147
E-mail [email protected]
International Dynamics (NZ) Pty Ltd
PO Box 109 317, Newmarket
Auckland, New Zealand
Tel.: +64 9 379 0179
Fax: +64 9 379 0279
SIBA Engineering S.A.
6, Kifisou Av.,
122 42 Aegaleo, Hellas
Tel. +30 - 210 - 5913793
Fax +30 - 210 - 5317755
Email [email protected]
Email [email protected]
E-mail: [email protected]
Videonix (Pty) Ltd
Loewe Opta GmbH,
Videoacústica
P.O. Box 31952, Kyalami 1684
Republic of South Africa
Tel. +27 - 1 14 66 47 00
Fax +27 - 1 14 66 42 85
Email [email protected]
Customer Care Center
Industriestraße 11
96317 Kronach, Deutschland
Tel. +49 1801–22256393
Fax +49 9261–99500
Email [email protected]
Basys Magyarorszagi KFT
Epitok utja 2–4
2040 Budaörs, Magyar
Tel. +36 - 23 41 56 37 (121)
Fax +36 - 23 41 51 82
Email [email protected]
Estrada Circunvalacao,
Quinta do Paizinho, Arm. 5
2795-632 Carnaxide, Portugal
Tel. +351 - 2 14 24 17 70
Fax +351 - 2 14 18 80 93
Email offi[email protected]
Printed in Germany
5/02.07/10,0/Ps
Subject to modifications
- 46
Download from Www.Somanuals.com. All Manuals Search And Download.
|