Magnavox DVD VCR Combo MSD804 User Manual

Owner’s Manual

Please read before using this equipment.

DVD/CD Player with Video Cassette Recorder

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

MSD804

Table of Contents

Precautions

Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4

Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4

About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup

■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5

Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8

■ VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ Preset for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10

Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Supplied Accessory

• Remote control

(NA509UD or NA559UD)

with two AA batteries

• RF cable

(WPZ0901TM002)

VCR Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11

■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ On-Screen Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Hint for Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . 14

• Audio/Video cables

(WPZ0102TM015 or

WPZ0102LTE01)

• Owner’s Manual

(1VMN20107)

Owner's Manual

DVD Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ The On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17

■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18

Repeat Playback / Repeat A-B Playback /

Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18

■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Subtitle Language / Audio Language / Camera Angle /

Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . 19

■ DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 22

If you need additional operating assistance after

reading this owner’s manual or to order replace-

ment accessories, please call

TOLL FREE : 1-800-605-8610

or visit our web site at http://www.funai-corp.com

Information

■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Basic TV Connection

(Back of

Cable

Signal

Antenna

Cable

Signal

Antenna

DVD/VCR)

(Back of TV)

outlets

(Back of TV)

ANT-IN

Plug in

ANT-OUT

Disconnect

From

Connect

DVD/VCR

Connect

From

RF Cable (supplied)

Please refer to "Connections" on page 5.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safeguards

1. Read Instructions - All the safety and operating instruc-

tions should be read before the appliance is operated.

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

FIGURE A

ANTENNA

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

LEAD

WIRE

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

cleaners. Use

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the

possibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description

otherwise required in item 5.

6. Attachments - Do not use attachments not recommended

by the video product manufacturer as they may cause haz-

ards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

8. Accessories - Do not place this video product on an unsta-

ble cart, stand, tripod, bracket, or table. The video product

may fall, causing serious injury to a child or adult, and seri-

ous damage to the appliance. Use only with a cart, stand,

tripod, bracket, or table recommended by the manufactur-

er, or sold with the video product. Any mounting of the

appliance should follow the manufactur-

er's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and cart

combination should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provid-

ed for ventilation and to ensure reliable operation of the

video product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this video product dur-

ing a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall out-

let and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touch-

ing such power lines or circuits as contact with them might

be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience recepta-

cles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any

way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are

required, be sure the service technician has used replace-

ment parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation Location

Maintenance

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do ¡Please refer to relevant topics on the Troubleshooting

SERVICING

not place anything directly on top of the unit. Do not

place the unit directly on top of the TV.

Guide on page 23 before return the product.

¡When this unit become inoperative, do not try to cor-

rect the problem by yourself. There are no user-ser-

viceable parts inside.Turn off, unplug the power plug,

and please call our help line mentioned on the front

page to locate an Authorized Service Center.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid

places. Avoid places with insufficient ventilation for

proper heat dissipation. Do not block the ventilation

holes on the sides of the unit. Avoid locations sub-

ject to strong vibration or strong magnetic fields.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild deter-

gent solution. Do not use a solution containing alco-

hol, spirits, ammonia or abrasive.

Avoid the Hazards of Electrical Shock and Fire

CLEANING DISCS

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

¡When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe

in a circular motion.

Do not use solvents such as benzine, thinner, commercial-

ly available cleaners, detergent, abrasive cleaning agents

or antistatic spray intended for analogue records.

• Do not put your fingers or objects into the DVD/VCR

cassette holder.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although

you refer to the relevant sections and to “TROU-

BLESHOOTING GUIDE” in this Owner’s Manual, the

laser optical pickup unit may be dirty. Consult your

dealer or an Authorized Service Center for inspection

and cleaning of the laser optical pickup unit.

Moisture Condensation Warning

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. Do not use this unit at least for 2 hours

until its inside gets dry.

DISC HANDLING

¡Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

¡Always store the disc in its protective case when it is

not used.

About Copyright

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

AUTO HEAD CLEANING

¡Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

¡Playback picture may become blurred or interrupted

while the TV program reception is clear. Dirt accu-

mulated on the video heads after a long period of

use, or the usage of rental or worn tapes can cause

this problem. If a streaky or snowy picture appears

during playback, the video heads in your DVD/VCR

may need to be cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,

please call our help line mentioned on the front page

to locate an Authorized Service Center.

Symbol Used in This Manual

NOTES:

The following symbols appear in some head-

ings and notes in this manual.

¡Remember to read the instructions along with the

video head cleaner before use.

¡Clean video heads only when problems occur.

VCR

: Description refers to playback or recording of video

cassette tapes.

Note to CATV system installer

DVD-V

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in par-

ticular, specifies that the cable ground should be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

: Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

MP3

: Description refers to playback of MP3 files.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-

marks of Dolby Laboratories.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

About the Video Cassettes and Discs

Playable Video Cassettes

Use only cassettes marked

with this unit.

Playable Discs

Recorded

signals

Playable

Mark (logo)

discs

Disc size

Region code

Disc types

DVD-Video

* 1,2,4,6

Example

12 cm

8cm

Digital video

(MPEG2)

Title 1

Title 2

DVD-R

DVD-RW

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

* 1,2,3,4,5,6

DVD+R

DVD+RW

* 1,2,3,4,5,6

Digital audio

MP3

Example

Audio CD

* 4,6

12 cm

8cm

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

Digital audio

MP3

Example

CD-R

Group 1

Group 2

CD-RW

Track 1

Track 3

Track 2

Track 5

* 4,5,6

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*3: Only the discs which have been recorded in the video format and finalized can be played back.

Discs unfinalized or recorded in the video recording format cannot be played back.

Depending on the recording status of a disc, the disc may not be played back at all or normally

(the picture or sound may be not be smooth, etc.).

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special

properties of discs.

*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.

Even if they are played back, the sound or video quality will be compromised.

Unplayable Discs

On the following discs, only the sound can be heard (picture cannot be viewed).

CDV

CD-G

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM

CD-I

Photo CD

Video CD

DVD with region codes other than 1 or ALL

DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

On the following disc, the sound MAY NOT be heard.

Super Audio CD

Note: Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications.

Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

RF Output Channel

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

Hint

• The RF output channel may

not change when you adjust

tracking during playback. In

this case, stop the playback,

and start the playback again.

After that, press the PLAY

button on the DVD/VCR for 3

seconds again.

2) Insert a pre-recorded tape into this unit.

3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.

• If noise appears on the TV screen, press the VCR/TV button on the remote control.

4) Press the PLAY button once.

5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.

•

The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.

• When a picture does not appear on the TV screen, repeat step [4].

6) Press the STOP button to stop playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Hint for Cable Box or Satellite Box

(Back of DVD/VCR)

Connection B

Connection A

(Cable box or

Satellite box)

ANT-IN

(Cable box or

Satellite box)

ANT-OUT

OUT

Cable

Signal

ANT-OUT

OUT

RF Cable

(supplied)

Cable

Signal

(Back of TV)

RF Cable (supplied)

RF Cable

Select this connection when you want to view or record a scram- Select this connection when you want to change channels on the

bled channel. With this connection, channels cannot be changed DVD/VCR. With this connection, you may watch one channel

on the DVD/VCR. You can view or record ONLY the channels you while recording another.

have selected on the cable box or the satellite box.

• While you are recording, only the recorded channel can be

viewed.

To select channels of the cable box or satellite box

1) Turn on the DVD/VCR by pressing the POWER button, and

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

1) At the cable box or satellite box, select channel 3 or 4 (the

same channel as the DVD/VCR’s RF output channel.)

• Refer to “RF Output Channel”.

then press the VCR/TV button.The “POWER” light on the front 2) At the TV, select the same channel as the output channel (3 or

panel will appear. Then, press the CHANNEL buttons to select 4) of the cable box or satellite box.

channel 3 or 4 (the same channel as the output channel of the 3) Turn on the DVD/VCR by pressing the POWER button, and

cable b ox or satellite box).

then press the VCR/TV button. The “POWER” light on the front

panel will appear. Then select the channel you want to view or

record.

To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to “Playback” on page 11.

• If you use the channel 4, you need to change the DVD/VCR’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you

have selected at step 1).

3) At the cable box or satellite box, select the channel you want to

view or record.

To view one channel while recording another

1) While you are recording on the DVD/VCR, press the VCR/TV but-

ton.

2) At the cable box or satellite box, select the channel you want to view.

Connection to an Audio System

Method 1

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Stereo system

Analog audio

input jacks

AUDIO

COAXIAL

Digital audio

input jack

Audio Coaxial

Digital cable

(commercially

available)

Audio cable

(supplied)

DVD/VCR

AUDIO OUT

VCR

DVD

AUDIO S-VIDEO

OUT OUT

COMPONENT

DIGITAL

VIDEO OUT

DVD/VCR

DIGITAL

AUDIO OUT

(Analog)

AUDIO IN

VIDEO IN

AUDIO OUT

COAXIAL

VIDEO OUT

DVD

Note

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT OUT

AUDIO OUT

• If output is Dolby Digital encoded audio, connect to a Dolby

Digital decoder and set “DOLBY DIGITAL” to “ON” in the

AUDIO menu. (Refer to pages 20-21.)

• The audio source on a disc in a Dolby Digital 5.1 channel

surround format cannot be recorded as digital sound by an

MD or DAT deck.

COAXIAL

• Unless connected to a Dolby Digital decoder, set “DOLBY

DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD

using incorrect settings may generate noise distortion, and

may also damage the speakers. (Refer to pages 20-21.)

• Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for con-

necting to an MD deck or DAT deck. (Refer to pages 20-

21.)

• By hooking this unit up to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality 5.1ch Dolby Digital

surround sound as heard in the movie theaters.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV

Method 1

Method 2

Method 3

Basic Audio

Good picture

Better picture

Best picture

COMPONENT

VIDEO IN

AUDIO IN

S-VIDEO IN

VIDEO IN

S-Video

cable

(commercially

Video

cable

(supplied)

Audio cable

(supplied)

available)

Component

Video cables

(commercially

available)

DVD/VCR

AUDIO OUT

VCR

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT

VCR

DVD/VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

DVD

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

VIDEO IN

COMPONENT

VIDEO OUT

AUDIO IN

ANT-IN

DIGITAL

AUDIO S-VIDEO

AUDIO OUT

OUT

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

ANT-OUT

DVD

COAXIAL

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

VIDEO OUT

VIDEO IN

OUT

AUDIO OUT

COAXIAL

VIDEO OUT

S-VIDEO OUT

DVD

COMPONEN

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

COMPONENT VIDEO OUT

COAXIAL

(Analog) AUDIO OUT

Note

•

Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•

The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.

Front & Rear Terminals

DVD ANALOG AUDIO OUT

jacks

DVD/VCR AUDIO OUT jacks

Connect the supplied audio

cables here through the audio

AUDIO IN jack

Connect audio cable coming

from the audio out jack of a

camcorder, another VCR, or an

audio source here.

Connect the supplied audio

ANT IN jack

Connect your antenna

or cable box here.

cables here through the Audio In jacks of a television or other

In jacks of a television or other audio equipment.

audio equipment. (DVD only)

ANT-IN

POWER

DVD

DVD/VCR

AUDIO OUT

DVD

VCR

COAXIAL jack

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

VIDEO

AUDIO

DVD/VCR

AUDIO OUT

VCR

OUT

AUDIO OUT

COMPONENT

DIGITAL

AUDIO S-VIDEO

OUT OUT

VIDEO OUT

Connect an optional coaxial

digital audio cable here

through the coaxial digital

audio in jack of a decoder or

audio receiver. (DVD only)

AUDIO OUT

ANT-IN

REW

F.FWD STOP/

AUDIO IN

VIDEO IN

P^B

AUDIO IN

VIDEO IN

^COAXIALR ^R

VIDEO OUT

ANT-OUT

P^R

COAXIAL

VIDEO OUT

[Front of

DVD/VCR]

[Back of DVD/VCR]

S-VIDEO OUT jack

ANT OUT jack

Connect the

supplied RF

cable to the

antenna input

jack on your TV.

VIDEO IN jack

Connect an optional

S-Video cable here

through the S-video

in jack of a televi-

sion. (DVD only)

COMPONENT VIDEO

OUT jacks

DVD/VCR VIDEO OUT jack

Connect a cable com-

ing from the video out

jack of a camcorder,

another VCR, or an

audio-visual source

(laser disc player, video

disc player, etc.) here.

Connect the supplied yellow

Connect optional component video cable here through

video cables here through

the component video in

jacks of a television.

(DVD only)

the TV’s video in jack.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Remote Control and Front Panel

VCR mode

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

Remote Control

DVD-V

MP3

VCR

•To select channel.

•The +10 button has no effect

in VCR mode.

•

To select chapter or title directly. •To select track directly.

POWER

SUBTITLE/

TIMER SET

+10

•To search forward/backward

SETUP

AUDIO

V.SURR

ANGLE

through a disc.

•To search forward/backward

•To forward/backward a tape.

•

To begin slow forward/reverse

playback during the pause mode.

through a disc.

REC/OTR

REPEAT

A-B

ENTER

• To select an item

C-RESET

CLEAR

on the VCR Menu.

SKIP/

SKIIP/

•To move the cursor and

• To advance to the next

VCR Menu.

determine its position.

TOP MENU

MODE

RETURN

•

To go back one step during

clock and timer setting.

DISPLAY

REPEAT

A-B

VCR

DVD

•To repeat between your

chosen point A and B.

chosen point A and B. (CD)

ENTER

ANGLE

AUDIO

•To select camera angles on

a disc.

•To select audio languages on •To select STEREO,

a disc.

L-CH or R-CH. (CD)

STOP

PLAY

•To clear the markers. (CD)

•To clear the markers.

•To clear the numbers

entered incorrectly.

C-RESET

CLEAR

•To remove status No.

•To exit the VCR Menu.

in program input.

•To reset the tape counter.

•To clear the numbers

PAUSE

entered incorrectly.

NA509

SPEED

SLOW

DISPLAY

DVD

•To display the current disc

•To display the current time,

mode.

tape counter, and channel.

• To select the DVD output

mode.

VCR/TV

• To activate the remote control

•

To activate the remote control

in DVD mode.

SEARCH MODE

•To call up the Menu

•To call up the MP3 menu.

+10

MODE

•To call up the VCR Menu.

on a disc.

(MP3)

•To arrange the playing

•To set black level on/off.

order or play randomly.

Installing the Batteries

for the Remote Control

• To pause tape playback or

recording.

•To advance playback

one frame at a time.

•To pause disc playback.

•To advance playback

one frame at a time.

• To pause disc playback.

PAUSE

Install two AA batteries

PLAY

(supplied) matching the polarity indi-

cated inside battery compartment of

the remote control.

• To begin tape playback.

• To begin disc playback.

POWER

•To turn the unit on or off.

REC/OTR

REPEAT

RETURN

• To start a recording or

One Touch Recording.

•To play a track or disc

repeatedly. (CD)

•To play a chapter or title

repeatedly.

•To play a track, group or disc

repeatedly. (MP3)

•To return to the previous

operation on the DVD setup

menu.

•To return to the previous

operation on the DVD setup

menu.

•To search track.

•To search time. (CD)

To search chapter, title or time.

•

SEARCH MODE

•To call up the index or time

•To rapidly return to

a location of disc.

•To set or search the markers.

(CD)

search menu.

a location of disc.

•To set or search the markers.

SETUP

•To call up the DVD setup

menu.

• To change channels.

SKIP/

SKIIP/

•

To adjust the tracking manually

during playback.

• To skip chapters.

• To skip tracks.

SLOW

SPEED

• To view the tape

in slow motion.

Keep in mind the following when using

the remote control:

• Make sure that there is no obsta-

cle between the remote and the

remote sensor on the unit.

• Use within the operating range

and angle, as shown.

•To select the recording speed.

STOP

• To stop playback.

• To stop playback or recording.

SUBTITLE/

TIMER SET

•To put the VCR into standby

•To select subtitles on a disc.

mode for a timer recording.

TOP MENU

•

To return to the top file of the

highest hierarchy in the program

and MP3 menu. (MP3)

•To call up the Top Menu

on a disc.

• To select the VCR output

mode.

VCR

• To activate the remote control

in VCR mode.

VCR/TV

• To select DVD position or

• To select CD/MP3 position

• To select VCR position or

TV position.

or TV position.

TV position.

V.SURR

•To set virtual surround on/off. •To set virtual surround on/off.

Remote

control

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Display

Lights up when the disc is inserted.

Lights up when the inserted

Lights up during a recording.

Flashes when a recording is paused.

disc is being played back.

Flashes when an unaccept-

able disc is installed.

Lights up when power is on.

POWER

OPEN

POWER

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

VIDEO

AUDIO

REW

F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

OUTPUT SELECT

REV/SKIP STOP

PLAY SKIP/FWD

Lights up when the timer recording

or an OTR recording has been set.

VCR/DVD Switching

Because this product is a combination of a VCR and a DVD player, you must select first which

component you wish to operate with the OUTPUT button.

VCR MODE

POWER

OPEN

POWER

Press the VCR button on the remote control.

POWER

ANGLE

SUBTITLE/

TIMER SET

REC

TIMER REC

VCR

DVD

DISC IN

PLA

VIDEO

AUDIO

REW

.FWD STOP/EJECT PLA

REC/OTR

CHANNEL

OUTPUT SELECT

REV/SKIP STOP

PLAY

SKIP/FWD

(Verify that the VCR OUTPUT light is lit.)

SETUP

AUDIO

V.SURR

REC/OTR

REPEAT

A-B

C-RESET

CLEAR

SKIP/

SKIIP/

DVD MODE

TOP MENU

MODE

RETURN

VCR button

DVD button

DISPLAY

VCR

DVD

Press the DVD button on the remote control.

ENTER

(Verify that the DVD OUTPUT light is lit.)

VCR

DVD

DVD OUTPUT

light

STOP

PLAY

Note

• Pressing only the OUTPUT button on the front

panel DOES NOT switch the mode of the

remote control. You MUST select the correct

mode on the remote control.

PAUSE

NA509

SPEED

SLOW

OUTPUT SELECT

OUTPUT button

VCR/TV

SEARCH MODE

+10

VCR OUTPUT

light

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Preset for Use

Turn on the unit for the first

time

To Preset the Channel Again

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

0 3 1 5 2 0 0 4

menu appears.

HOUR MINUTE AM/PM

– – – – – –

2) Select "CHANNEL SET UP" by pressing

the K or L button. Then press the B but-

ton.

VCR

Select the current year

3) Select "AUTO SET UP" by pressing the

K or L button. Then press the B button.

After scanning, the tuner stops on the low-

est memorized channel.

Turn on the TV and set it

to channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

To Change the On-Screen Language

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

menu appears.

0 3 1 5 MON 2 0 0 4

POWER

Remote Control TV Screen

2) Select "LANGUAGE SELECT" by press-

ing the K or L button. Then press the B

button.

HOUR MINUTE AM/PM

0 5 – – – –

LANGUAGE SELECT

3) Select "ENGLISH" , "FRANCAIS" or

"ESPAÑOL" by pressing the K or L but-

ton. Then press the CLEAR/C.RESET but-

ton.

Select the current hour

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

Hint

CLOCK SET

MONTH DAY YEAR

• If you accidentally select Spanish or

French and need English: Press the

MENU button and choose SELEC.

0 3 1 5 MON 2 0 0 4

IDIOMA, or SELECTION LANGUE. Press

the B button, and select ENGLISH. Finally,

press the CLEAR/C.RESET button.

HOUR MINUTE AM/PM

0 5 4 0 – –

CH 01

AUTO SET UP

Select the current minute

Clock Set Up

VCR

Do you connect the cable from the cable box or

the satellite box to the DVD/VCR’s ANT IN jack?

YES

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

CLOCK SET

MONTH DAY YEAR

0 3 1 5 MON 2 0 0 4

Yes Press the MENU

LANGUAGE SELECT

HOUR MINUTE AM/PM

button to exit

0 5

4 0

P M AM

B PM

• Refer to “Hint for Cable Box

or Satellite Box” section on

• If the clock is not set, the

Select “AM” or “PM”

CLOCK SET screen

appears when you press

the MENU button. In this

case, go to step [2].

page 6.

No Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized

channel.

• You can select only the channels memo-

rized in this unit by using the CHANNEL

buttons.

• If "AUTO SET UP" appears on the TV

screen again, check the cable connections.

Then press the B button once again.

To exit the CLOCK SET

screen.

CLOCK SET

MONTH DAY

0 3 – –

YEAR

– – – –

HOUR MINUTE AM/PM

– – – – – –

Hint

Select the current month

• Repeat these steps only if either there

was a power failure or this unit has been

unplugged for more than 30 seconds.

• To go back one step, press the s button

(during the steps [2] to [7].)

•

Your clock setting will be lost if either there

is a power failure or this unit has been

unplugged for more than 30 seconds.

To Select a Channel

You can select a channel by directly

entering channel using the Number but-

tons on the remote control.

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

– – – –

Notes for using the Number buttons:

• When selecting cable channels which

are higher than 99, enter channel

numbers as a three-digit number.(For

example: 117, press 1,1,7)

HOUR MINUTE AM/PM

– – – – – –

Select the current day

• You must precede single-digit channel

numbers with a zero (For example:

02, 03, 04 and so on).

–

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Functions

Playback

Before:

Hint

Turn on the TV and set it to

channel 3.

• If channel 3 is already occupied for broad-

casting, see “RF Output Channel” section.

POWER

SUBTITLE/

TIMER SET

• When a tape with-

out record tab is

inserted, the

SETUP

AUDIO

V.SURR

ANGLE

POWER

REC/OTR

REPEAT

A-B

OPEN

DVD/VCR will start

playback automati-

cally.

• Tracking will be

automatically

adjusted upon play-

back. To adjust the

tracking manually,

press the CHAN-

NEL buttons.

VCR

C-RESET

CLEAR

POWER

VCR

SKIP/

SKIIP/

REC

TIMER REC

VIDEO

AUDIO

TOP MENU

MODE

RETURN

Remote Control TV Screen

REW

F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

DISPLAY

VCR

DVD

PLAY

PLAYB

ENTER

3 2

STOP

PLAY

STOP

EJECT A

PAUSE

STOP/EJECT

Recording & OTR (One Touch Recording)

Before:

REC/OTR

REPEAT

Turn on the TV and set it to

channel 3.

Hint

• To view one chan-

nel while recording

another

A-B

C-RESET

CLEAR

SKIP/

SKIIP/

• If channel 3 is already occupied for

TOP MENU

MODE

RETURN

broadcasting, see “RF Output Channel” section.

DISPLAY

1) While you are

recording on the

DVD/VCR, press

the VCR/TV button.

2) At the cable box

or satellite box,

VCR

DVD

VCR

ENTER

POWER

OPEN

Remote Control TV Screen

POWER

REC

TIMER REC

VIDEO

AUDIO

STOP

PLAY

CH12

select the channel

you want to view.

REW

F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

• Select the

desired channel

• If you have connect-

ed the DVD/VCR to

a cable box or satel-

lite box, refer to

PAUSE

NA509

with tab

SPEED

SLOW

SKIP/

SKIIP/

• Select the desired tape

speed

“Hint for Cable Box

or Satellite Box”

SPEED

VCR/TV

section on page 6.

Tape Speed

Recording/Playback Time

SEARCH MODE

Type of tape

SP mode

SLP mode

T60

T120

2hours

6hour

T160

2-2/3hours

8hour

+10

1hour

3hour

REC/OTR

Accidental erasure prevention

REC

To prevent accidental recording on a record-

ed cassette, remove its record tab. To record

on it later, cover the hole with cellophane

tape.

You can select a fixed recording time by press-

ing the REC/OTR button repeatedly.

Record tab

REC

OTR(0:30)

OTR(1:00).....

(Normal recording)

You CAN NOT copy a DVD to a videotape.

OTR(8:00)

OTR(7:30)

To stop recording temporarily (Pause mode)

STOP

EJECT A

Press the PAUSE/STILL button.

STOP/EJEC

• During the rec-pause mode, five

marks appear on the TV

mark represents one minute.

• Press it again to resume recording.

screen. Each

Other Operations

To cue or review picture during playback

(Picture Search)

Counter Reset

Hint

Press the CLEAR/C.RESET button.

•

Still/Slow/Pause

mode will be

Press the F.FWD or REW button.

To play back in slow motion

• Press it again and the DVD/VCR will search in

super high speed. (in the LP/SLP modes only)

automatically

cancelled after 5

minutes to pre-

vent damage to

the tape and the

video head.

Press the SLOW button during playback or the still

mode.

To freeze the picture on TV screen during play-

• If the noise bars appear on the TV screen, you can

reduce it by pressing the CHANNEL buttons.

back (Still mode)

Press the PAUSE/STILL button. Each time you

press the button, the picture will be forwarded by

one frame.

• To return to

playback from

the Picture

Search/Still/

Slow mode,

press the PLAY

button.

Auto Rewind

When a tape reaches its end during playback, fast-for-

ward, or recording (except timer recording and One

Touch Recording), the tape will automatically rewind

to the beginning. After rewinding finishes, the

DVD/VCR will eject the tape.

• If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

CHANNEL buttons.

• If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV, if equipped.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Operations

VCR

REC/OTR

REPEAT

A-B

To call up the main menu 3 To decide

C-RESET

CLEAR

SKIP/

SKIIP/

Remote Control TV Screen

CHANNEL SET UP

AUTO SET UP

TOP MENU

MODE

RETURN

-MENU-

DISPLAY

VCR

DVD

B MANUAL SET UP

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

ENTER

LANGUAGE SELECT

STOP

PLAY

To select an item

To exit the menu

-MENU-

C-RESET

CLEAR

PAUSE

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

NA509

SPEED

LANGUAGE SELECT

Recording Features

Timer Recording

•Insert a tape with its record tab into the DVD/VCR.

ONE TIME PROGRAM

PROGRAM NUMBER

VCR

DATE

0 5 / 0 3 MON

VCR

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

Select the desired start time

(hour)

Remote Control TV Screen

CHANNEL

1 6

REC SPEED SP

B SP

SLP

-MENU-

ONE TIME PROGRAM

PROGRAM NUMBER

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

Select the desired recording speed

DATE

0 5 / 0 3 MON

START TIME 0 7 : 3 0 – –

END TIME – – : – – – –

• To set another program after step [9], press the

LANGUAGE SELECT

button. Then continue with step [2].

CHANNEL

– –

REC SPEED – –

C-RESET

CLEAR

Select the minute

SUBTITLE/

TIMER SET

PROGRAM NUMBER

DATE – – / – –

START TIME – – : – – – –

END TIME – – : – – – –

• TIMER REC light on the front panel appears.

The DVD/VCR will change to the DVD mode.

CHANNEL

– –

Hint

• To go back one step, press the

the steps [3] to [9].)

REC SPEED – –

button (during

ONE TIME PROGRAM

PROGRAM NUMBER

Select an empty program

number

DATE

0 5 / 0 3 MON

To Check, Correct, or Cancel a

Timer Program

START TIME 0 7 : 3 0 PM

END TIME – – : – – – –

CHANNEL

– –

REC SPEED – –

B PM

1) Press the SUBTITLE/T-SET button

then the VCR button on the remote

control.

2) Select main menu by pressing the

MENU button.

3) Select "TIMER PROGRAMMING"

by pressing the K or L button. Then

press the B button.

4) Select the program number which

you want to check by pressing the K

or L button. The details of the pro-

gram you selected will appear on

the TV screen.

• Go to the digit you want to change

by pressing the B or s button. Then

enter correct numbers by pressing

the K or L button.

• You may cancel the entire program

by pressing the s button while the

program number flashes.

Select “AM” or “PM”

PROGRAM NUMBER

B ONCE

DAILY

WEEKLY

Repeat the procedure in steps 5

and 6 to set the end time.

Select “ONCE”, “DAILY”

(Mon-Fri), or “WEEKLY”

ONE TIME PROGRAM

PROGRAM NUMBER

DATE 0 5 / 0 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

Select the desired month

ONE TIME PROGRAM

PROGRAM NUMBER

CHANNEL

1 6

DATE

0 5 / 0 3 MON

REC SPEED – –

START TIME – – : – – – –

END TIME – – : – – – –

CHANNEL

– –

Select the desired channel

If you have connected the DVD/VCR to a

cable box or satellite box as the

Connection A on page 6, select the VCR

to channel 3 or 4 (the RF output channel

of the VCR). Then select the desired chan-

nel at the cable box or satellite box. Leave

the cable box or satellite box on for timer

recording.

REC SPEED – –

•

5) Press the CLEAR/C.RESET button

to exit.

6) Press the SUBTITLE/T-SET button

to return to timer stand-by mode.

Select the desired day

• You can program one

year in advance.

To cancel a Timer Recording in

progress

Press the STOP/EJECT button on

the DVD/VCR.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Hint for Timer Recording

• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting

and all timer settings will be lost.

• If a tape is not in the DVD/VCR or does not have the record tab, the TIMER REC light flashes and timer

recording cannot be performed. Please insert a recordable tape.

• If a tape ends during timer recording, the VCR will stop, eject the tape and switch to the DVD mode automati-

cally as the TIMER REC light flashes. (If the DVD power is off, the VCR will become STANDBY status).

• When all timer recordings are finished, the TIMER REC light will flash.

• When timer recordings are set, the TIMER REC light will appears. To use the VCR as usual until the time for

the recording, press the SUBTITLE/T-SET button so that the TIMER REC light disappears. Press the VCR/TV

button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as

described in this manual.

If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or

flashes.

• You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press

the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode,

then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to

use the DVD only.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

1) Insert a pre-recorded tape into the playing VCR.

(Back of TV)

2) Insert a tape with its record tab into the recording

(Back of another source)

(Back of Recording DVD/VCR*)

DVD/VCR.

3) Press the SPEED button on the remote control

of the recording DVD/VCR to select the desired

recording speed (SP/SLP).

DVD/VCR

VCR

AUDIO IN

DVD

AU -VIOIDEO

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO OUT

^AUA^DIOU^OD^UI^TO OUT

COMPONENT

VIDEO OUT

ANT-IN

DIGITAL

AUDIO OUT

OU UT

ANT-IN

Connect

AUDIO IN

Connect

VIDEO OUT ^IN

VIDEO OUT

VIDEO

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

4) Select the "L1" or "L2" position on the recording

RF cable

(supplied)

*Front input jacks are also available

DVD/VCR.

Audio/Video cables

(not supplied)

• To use the input jacks on the back of this unit,

select "L1" position by pressing [0], [0], [1] on

the remote control or the CHANNEL buttons.

Hint

• To use the input jacks on the front of this unit,

select "L2" position by pressing [0], [0], [2] on

the remote control or the CHANNEL buttons.

• For best results during dubbing, use the front panel controls whenever

possible. The remote control might affect another source’s operation.

• Always use video-quality shielded cables with RCA-type connectors.

Standard audio cables are not recommended.

• You can use a video disc player, satellite receiver, or other audio/video

component with A/V outputs.

5) Press the REC/OTR button on the recording

DVD/VCR.

6) Begin playback of the tape in another source.

7) To stop recording, press the STOP/EJECT button

on the recording DVD/VCR, then stop playback of

the tape in another source.

• “L1” or “L2” is found before the lowest memorized channel. (Example:

CH02)

• “L2” input jacks are on the front of this DVD/VCR.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Features

Time Search

Index Search

Auto Repeat

You can repeat playback of a

whole tape automatically.

You can specify the time for fast

forwarding or rewinding.

You can specify the number of pro-

grams to be skipped.

• Insert a tape into this unit.

VCR

Remote Control TV Screen

SEARCH MODE

-MENU-

INDEX SEARCH

TIME SEARCH

– : – –

– –

TIMER PROGRAMMING

B AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

x1 (Once)

x2 (Twice)

Select the desired length of

time for fast forwarding or

rewinding

INDEX SEARCH

0 3

-MENU-

TIMER PROGRAMMING

B AUTO REPEAT [ON]

CHANNEL SET UP

CLOCK SET

TIME SEARCH

2 : 5 0

LANGUAGE SELECT

01 ~ 20

CURRENT PROGRAM

Beginning

End

of tape

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

0:01~ 9:59

(1 minute~9 hours

and 59 minutes)

INDEX MARK

AUTO REPEAT B

To rewind

To fast forward

Hint

To rewind

To fast forward

After searching,

• To cancel Auto Repeat, follow steps [1]-[2] above.

Then press the

button, so that [OFF] appears

beside AUTO REPEAT. Press the

CLEAR/C.RESET button to exit.

• If menu remains on the TV screen at step [3],

press the CLEAR/C.RESET button to exit.

After searching,

PLAYB

Hint

• This unit stores index mark at the beginning of

the recording. There should be time gap between

two index marks for the Index Search.

Hint for Timer Search & Index Search

• These functions are not available during recording.

• Press the STOP button to stop the search.

• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Functions

Playback

Before: Turn on the TV, amplifier and any other components which

are connected to this unit. Make sure the TV and audio receiver

(commercially available) are set to the correct channel.

POWER

ANGLE

SUBTITLE/

Hint

• When you play an MP3

file, details on page 16.

TIMER SET

SETUP

AUDIO

V.SURR

REC/OTR

REPEAT

A-B

• A “prohibited icon” may

C-RESET

CLEAR

(

⇒p.16

)

appear at the

DVD-V

MP3

SKIP/

SKIIP/

top-right on

the TV

screen when the opera-

tion is prohibited by the

disc or this unit.

• Some DVDs may be

played from title 2 or 3

due to specific pro-

grams.

• During the playback of a

two-layered disc, pic-

tures may stop for a

moment. This happens

while the 1st layer is

being switched to the

2nd layer. This is not a

malfunction.

TOP MENU

MODE

RETURN

DVD

DISPLAY

VCR

DVD

ENTER

POWER

OPEN

STOP

PLAY

Remote Control TV Screen

PLAY

STOP

POWER

OPEN

POWER

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

DEO

AUDIO

REW

F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

OUTPUT SELECT

REV/SKIP STOP

PLAY SKIP/FWD

OPEN

4 3

DVD menu

To use the SKIP/REV, FWD/SKIP buttons on the

Main Unit

DVDs may contain menus to access special features. Press

appropriate Number buttons or use the arrow (K/L/s/B)

buttons to highlight your selection on the DVD main menu

and press the ENTER button to confirm.

DVD-V

MP3

Press once to skip chapters or tracks to a desired point.

Press and hold to change forward or reverse playback

speed.

Calling up a Menu Screen during Playback

• Press the MENU button to call up the DVD menu.

• Press the TOP MENU button to call up the title menu.

Note

Fast Forward/Reverse Search

• Menu operations may vary depending on the disc. Refer to

DVD-V

MP3

the manual accompanying the disc for details.

Press the g or h button repeatedly dur-

ing playback to select the required forward or

reverse speed.

To continue playback, press the PLAY

button.

• For DVDs, fast forward or reverse search speed is different

depending on the disc. Approximate speed is

1(x2),2(x8),3(x50),4(x100).

• For Audio CDs, approximate speed is x16.

• For MP3, approximate speed is x8.

Resume

DVD-V

MP3

Press the STOP button. Resume message will appear on

the TV screen.

Press the PLAY button, play-

back will resume from the

point at which playback was

stopped.

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Slow Forward/Slow Reverse

• To cancel resume, press the

STOP button one more time

during the Stop mode.

DVD-V

• For MP3, playback will resume from the beginning of the

Press the g or h button repeatedly dur-

ing the pause mode to select the required for-

ward or reverse speed.

To continue playback, press the PLAY

button.

track at which playback was stopped.

Paused and Step-by-Step Playback

DVD-V

MP3

• Slow forward or reverse speed is different depending on

the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).

Press the PAUSE button during playback.

To continue playback, press the PLAY

button.

Hint

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-

back mode are blurred. (Refer to pages 20-21.)

DVD-V

The disc goes forward by one frame each time the PAUSE

button is pressed during the pause mode.

To continue playback, press the PLAY button.

Hint

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause

mode are blurred. (Refer to pages 20-21.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 Playback

MP3 is a method of compressing files.You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.

DVD

MP3

STOP

Insert a MP3-format disc, then press

the MENU button to call up the MP3

menu on the TV screen.

Hint

Remote Control TV Screen

• Some selections may take a while to be recognized.

• Press the TOP MENU button to return to the first item.

FILE LIST

• Folders are known as Groups; files are known as Tracks.

DISC NAME

FOLDER

MP3

folder name

• MP3 files are accompanied by

icon.

file name

• Folders are accompanied by

icon.

ENTER

PLAY

1/2

• A maximum of 255 folders can be recognized.

• A maximum of 512 files can be recognized.

• Up to 8 hierarchies can be created.

folder name

When selecting the folder:

This player recommends the files recorded under the following circumstances:

• Sampling frequency: 44.1kHz or 48kHz

• Constant bit rate: 112kbps ~ 320kbps.

• Press the B button when you

want to go to the next hierar-

chy.

ENTER

• Press the s button when you

want to go back to the previ-

ous hierarchy.

The On-Screen Display

You can check the information about the current disc by pressing the DISPLAY button on the remote control.

DVD

DVD-V

DISPLAY

Current playback status

4/12 0:03:21 - 0:02:15

Remaining time of the current track

Elapsed time of the current track

Current playback status

11/16 0:00:00 - 0:03:30

Remaining time of the current chapter

Elapsed time of the current chapter

TR(Track):

Current track number / Total tracks

DISPLAY

CH(Chapter):

Current chapter number / Total chapters

ALL:

DISPLAY

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

Current repeat setting appears only when

the repeat setting is active

T: Track repeat

1/3 0:00:00 - 1:23:45

A: All Tracks repeat

Remaining time of the current title

Elapsed time of the current title

B: A-B repeat

Remaining time of the current audio CD

Elapsed time of the current audio CD

DISPLAY

TT(Title):

Current title number / Total titles

DISPLAY

DVD

Layer numbers, appears only when playing

a two-layered Disc

MP3

DISPLAY

L0: Layer 0 is playing

Current playback status

L1: Layer 1 is playing

TRACK 01

Current repeat setting appears only when

the repeat setting is active

The name of the file currently in play

will be displayed.

C: Chapter repeat / T: Title repeat /

DISPLAY

B: A-B repeat

TR(Track):

Current Track number / Total Tracks

BIT RATE: The amount of audio and video

data currently being read

1/36 0:01:15

DISPLAY

Current Repeat setting, if active

T: Track repeat

G: Group (folder) repeat

A: Disc repeat

Elapsed playing time of the current track

DISPLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Search Function

Track Search

Title / Chapter Search

Time Search

DVD

MP3

DVD-V

Remote Control TV Screen

Using the number buttons

Using the SEARCH MODE button

PLAY

Remote Control TV Screen

TOTAL 1:29:00

SEARCH MOD

/12

press button repeatedly

until this screen

appears

SEARCH MOD

x1(Press once) for the chapter search

x2 (Press twice) for the title search

+10

•For single digit tracks (1-9), press a

single number (eg. track 3, press 3).

•To play track 26, press +10, 2, 6 of the

Number buttons.

TOTAL 1:29:00

/12

+10

Using the SEARCH MODE button

Within 30 seconds

SEARCH MOD

• e.g. When you enter 5:55, 0 is auto-

matically entered, so that “0:05:55” is

displayed on the time search screen.

Using the SKIP

buttons

PLAY

Current Chapter

(CH)

SKIP/

SKIIP/

+10

CH 1 CH 2 CH 3 CH 4

Within 30 seconds

SKIP

Using the SKIP

buttons

Note

PLAY

¡Depending on the disc being played,

this function can also be performed by

directly entering the desired chapter

number with the number buttons.

Refer to the manual accompanying

the disc.

Current Track

(TR)

SKIP/

SKIIP/

TR 1 TR 2 TR 3 TR 4

SKIP

Marker Setup

To return to the marker

later

To exit the marker screen

DVD

DVD-V

This feature allows you to assign a specific

point on a disc to be called back later.

Remote Control TV Screen

PLAY

RETURN

To set a marker

Remote Control TV Screen

PLAY

press button repeat-

SEARCH MODE

edly until this screen

appears

SEARCH MODE

press button repeated-

ly until this screen

appears

Notes

¡Opening the disc tray or turning off the

power will erase all markers.

¡Selecting “AC” at step [2] in the sec-

tion “To set a marker” will also erase

all markers.

¡To clear a marker, select the marker to

be cleared at step [2] in the section

“To return to the marker later,” then

press the CLEAR/C.RESET button.

ENTER

at the desired marker

•Playback will restart from the specific point

which you set.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat / Random / Programmed Playback

Repeat Playback

Repeat A-B Playback

Programmed Playback

DVD

DVD-V

MP3

DVD-V

MP3

DVD

Remote Control TV Screen

You may determine the order in which

tracks will play.

PLAY

A-

Remote Control TV Screen

Repeat function is available only during playback.

Remote Control TV Screen

STOP

REPEAT

A-B

CD-DA

TOTAL 0:00:00

PLAY

at your desired starting point (A).

ENTER

MODE

REPEAT

A-B

x1 (Press once)

REPEAT

A-B

Each time the REPEAT button is pressed...

DVD-V

CD-DA

TOTAL 0:08:00

at your desired end point (B).

3:30

2:30

10 1:30

ALL CLEAR

¡Point B should be in the same title

or track as point A is.

(current chapter repeat)

(current title repeat)

(repeat off)

CHAPTER

ENTER

2/2

3:30

TITLE

Up to 99 programs can be

stored.

¡To exit the sequence, press the A-B

button.

¡To cancel Point A, press the

CLEAR/C.RESET button.

¡This function does not work in the

other repeat modes.

ENTER

OFF

While a MP3 folder is open:

• For the next hierarchy,

press the B button.

• For the previous hierarchy,

press the s button.

(current track repeat)

(entire disc repeat)

(repeat off)

TRACK

ALL

PLAY

Random Playback

OFF

This shuffles the playing order of tracks

instead of playback in the sequence.

Notes

MP3

DVD

¡Press the CLEAR/C.RESET but-

ton at step [2] to erase the most

recently entered program.

¡To erase all programs at once,

select “ALL CLEAR’’ and press

the ENTER button at step [2].

¡While a program is being played

back, the STOP button works as

follows;

MP3

(current track repeat)

(current group repeat)

(entire disc repeat)

(repeat off)

TRACK

GROUP

ALL

STOP

RANDOM

CD-DA

TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

MODE

PLAY

OFF

x2 (Press twice)

¡Repeat setting will be cleared when

moving to another title, chapter or

track.

¡Repeat playback are not available

with all discs or during repeat A-B

playback.

⇒

Press the STOP button and the

PLAY button next, so that the pro-

grammed playback restarts. (CD

playback restarts from the current

point. MP3 playback restarts from

the beginning of the current track.)

Press the STOP button twice and

the PLAY button next, so that play-

back restarts from the first track in

the original order. However, your

programmed playback can be

restarted when you follow the above

steps. (Your programs are still

stored until either the disc tray is

open or power is turned off.)

PLAY

Note

¡If you want to repeat the current

track in the random selections,

press the REPEAT button repeat-

⇒

edly until

TRACK appears dur-

ing playback. If you want to repeat

the entire random selections,

press the REPEAT button repeat-

edly until

playback.

ALL appears during

¡To repeat the current track in the

program, press the REPEAT but-

ton repeatedly until “

TRACK’’

appears during playback.

¡To repeat the entire program press

the REPEAT button repeatedly until

“

ALL’’ appears during playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Settings

Subtitle Language

Audio Language

Stereo Sound mode

DVD

DVD-V

This unit allows you to select a subtitle

language (if available) during DVD play-

back.

This unit allows you to select an audio

language (if multiple languages are

available) during DVD playback.

This unit allows you to select a sound

mode during CD playback.

Remote Control TV Screen

PLAY

STEREO

1.ENG/6

1.ENG Dolby D 3/2.1ch 48k/3

AUDIO

SUBTITLE/

TIMER SET

Each time you press the AUDIO button;

For example

Each time you press the SUBTITLE/T-

SET button, subtitle languages change.

For example

Each time you press the AUDIO button;

(right and left channels

are active)

(left channel is active)

STEREO

L-CH

(English audio)

(Spanish audio)

ENG

(English subtitles)

(French subtitles)

ENG

SPA

FRE

(right channel is active)

R-CH

Note

¡If the Virtual Surround setting is “1’’ or

“2’’, the sound mode will be fixed to

STEREO and can not be changed.

(French audio)

FRE

OFF

(no subtitles)

Camera Angle

Virtual Surround

To set subtitle ON/OFF

DVD

DVD-V

MP3

Some DVD discs may con-

tain scenes which have

PLAY

DVD

1.ENG/6

been shot simultaneously

from various angles. You can change

You can enjoy stereophonic virtual

world on your existing 2 channel stereo

system.

the camera angle if the (

) icon

SUBTITLE/

TIMER SET

appears on the screen. If the “ANGLE

ICON” setting is “OFF” in the Display

menu, the (

) icon will not appear.

PLAY

(Refer to pages 20-21.)

OFF

PLAY

V.SURR

1 / 8

Notes

¡If your language is not shown after

pressing the AUDIO or SUBTITLE/T-

SET button several times, the disc

may not have that language. However,

some discs allow audio language or

subtitle language setting on the disc

menu. (Operation varies depending

on the discs, so refer to the manual

along with the disc.)

¡When “NOT AVAILABLE” appears on

the TV screen, it means no subtitle is

recorded on the scene.

¡If you choose a language that has a 3

letter language code, the code will be

displayed every time you change the

subtitle language setting. If you choose

any other languages, ‘---’ will be dis-

played instead. (Refer to page 24.)

ANGLE

V.SURR

Black Level Setting

1: Natural effect

2: Emphasized effect

OFF: No effects (original sound)

DVD

DVD-V

Adjust the Black Level Setting to make

the dark areas of the TV picture brighter.

RETURN

PLAY

Note (for CD play back only)

¡Virtual Surround will not be effective if

the sound mode is set to something

other than STEREO.

MODE

ENTER

OFF

ON: Makes the dark areas brighter.

OFF: Shows the original picture as recorded.

RETURN

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD

DVD Set Up

These funtions are available with remote control. Follow the illustrations below.

QUICK SETUP Menu

You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.

Remote Control

STOP

SETUP

Select the desired item

Confirm that QUICK is selected

TV Screen

ENTER

SETUP

QUICK

P20

P21

(Step 5)

PLAYER MENU

TV ASPECT

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

SETUP

QUICK

CUSTOM

INITIALIZE

ENTER

•Refer to the sections “PLAYER

MENU”, “TV ASPECT”, or “DOLBY

DIGITAL” section on page 20 or 21.

CUSTOM Menu

You can change the DVD player’s settings.

SETUP

ENTER

STOP

to decide

To select the desired item

Select CUSTOM

ENTER

SETUP

CUSTOM

SETUP

LANGUAGE

DISPLAY

AUDIO

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

PARENTAL

LANGUAGE menu

DISPLAY menu

AUDIO menu

PARENTAL menu

SETUP

LANGUAGE

SETUP

DISPLAY

SETUP

AUDIO

SETUP

PARENTAL

PASSWORD

AUDIO

ORIGINAL

OFF

ENGLISH

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

DRC

Please enter a 4-digit password.

SUBTITLE

DISC MENU

PLAYER MENU

DOWN SAMPLING ON

DOLBY DIGITAL ON

AUTO POWER OFF ON

page 20

page 21

page 22

LANGUAGE Setting

Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired language

Select the desired item

To exit the menu

ENTER

SETUP

ENTER

AUDIO ∗1 ∗2

(Default: ORIGINAL)

Sets the audio language.

AUDIO

Hint

ORIGINAL

ENGLISH

FRENCH

∗1

• Language options are not available with

some discs.

• If OTHER is selected on the AUDIO, SUBTI-

TLE or DISC MENU screen, press four-digit

number to enter the code for the desired lan-

guage. (Refer to the language code list on

page 24.)

• Only the languages supported by the disc

can be selected.

∗2

LANGUAGE menu

SUBTITLE: ∗1 ∗2

(Default: OFF)

Sets the subtitle language.

SUBTITLE

OFF

ENGLISH

FRENCH

SETUP

LANGUAGE

AUDIO

ORIGINAL

SUBTITLE

DISC MENU

PLAYER MENU

OFF

ENGLISH

DISC MENU: ∗1

(Default: ENGLISH)

Sets the language for DVD

menu.

DISC MENU

ENGLISH

FRENCH

SPANISH

• Language Setting for Audio and Subtitle is

not available with some discs. Then use the

AUDIO and the SUBTITLE/T-SET button.

Details are on page 19.

PLAYER MENU

ENGLISH

FRANÇAIS

ESPAÑOL

QUICK

PLAYER MENU:

(Default: ENGLISH)

Sets the language for the

On-screen display.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY Setting

You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired item

6 To exit the menu

SETUP

QUICK

TV ASPECT:

(Default: 4:3 LETTER BOX)

See Hint to the right.

Select the

desired

setting

TV ASPECT

ENTER

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

AUTO POWER OFF ON

DISPLAY menu

ENTER

Hint

SETUP

DISPLAY

STILL MODE:

(Default: AUTO)

See Hint to the right.

TV ASPECT:

Select the

desired

setting

• Select “4:3 LETTER BOX”, so

that black bars appear on the

top and bottom of the screen.

• Select “4:3 PAN & SCAN” for

a full height picture with both

sides trimmed.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

AUTO POWER OFF ON

STILL MODE

ENTER

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

FIELD

FRAME

AUTO

AUTO POWER OFF ON

• Select “16:9 WIDE” if a wide-

screen TV is connected to this

unit.

ENTER

ANGLE ICON:

(Default: ON)

Set to “ON” to show the angle icon when multiple camera

angles are available during DVD playback.

STILL MODE:

• Select “AUTO” usually.

• If you select “FIELD”, the pic-

ture in the still mode will be

stabilized.

• If you select “FRAME”, the

picture in the still mode will be

highly defined.

4:3 LETTER BOX

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

OFF

AUTO POWER OFF ON

ENTER

AUTO POWER OFF:

(Default: ON)

Set to “ON” to turn this unit off automatically after

35 minutes of no use.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

4:3 LETTER BOX

AUTO

AUTO POWER OFF ON

OFF

ENTER

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)

to 3) in the “CUSTOM Menu” section on page 20.

6 To exit the menu

Select the desired item

SETUP

DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC

OFF

DOWN SAMPLING ON

DOLBY DIGITAL

ENTER

Hint

AUDIO menu

DRC:

DOWN SAMPLING:

(Default: ON)

Set to “ON” when outputting in 48 kHz.

SETUP

AUDIO

• This function is available only

on the discs which are record-

ed in the Dolby Digital format.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

Set to “OFF” when outputting the original sound.

DOWN SAMPLING:

• When playing disc with copy-

right Protection, the sound will

be down sampled at 48kHz,

even if you set to OFF.

• This function is available only

on digital outputting of a disc

recorded in 96kHz.

DRC

OFF

DOWN SAMPLING ON

DOLBY DIGITAL

ENTER

QUICK

DOLBY DIGITAL:

(Default: ON)

Set to “ON” when the unit is connected to a Dolby Digital receiver.

• ON: Outputs a Dolby Digital Signals

• OFF: Convert the Dolby Digital into PCM (2 channel)

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

OFF

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL Setting

Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)

This feature prevents your children from viewing inappropriate materials.

Parental Levels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.

Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Enter your desired four-

digit password (except

for 4737)

Select “PARENTAL

LEVEL”

Select the

desired levels

SETUP

ENTER

PARENTAL LEVEL

CHANGE

ALL

7 [NC-17]

6 [R]

PARENTAL menu

SETUP

PARENTAL

PASSWORD

Please enter a 4-digit password.

Hint

CONTROL LEVELS

• ALL:

• Levels 8:

All parental locks are cancelled.

DVD softwares of any grades (adult/general/children)

can be played back.

Only DVD softwares intended for general use and chil-

dren can be played back.

Only DVD softwares intended for children can be played

back, with those intended for adult and general use pro-

hibited.

If you have set a password already,

enter the current four-digit

password.

• Levels 7 to 2:

• Level 1:

SETUP

PARENTAL

PASSWORD

Enter current password.

To Change the Password for Parental Controls

You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Select “CHANGE”

Enter your new

four-digit password

(except for 4737)

Enter your desired four-

digit password (except

for 4737)

SETUP

ENTER

PARENTAL LEVEL

CHANGE

ALL

Hint

• Record the password in

case you forget it.

SETUP

PARENTAL

PARENTAL menu

PASSWORD

Please enter a 4-digit password.

SETUP

PARENTAL

• If you forget the password,

press 4, 7, 3, 7 at step 4,

then enter your new pass-

word.

PASSWORD

Enter current password.

• Password will be cleared

and parental levels will be

set to ALL.

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting

To exit

the menu

SETUP

STOP

SETUP

ENTER

Select “YES”

Select INITIALIZE

(twice)

SETUP

INITIALIZE

SETUP

Hint

• When you cancel

to initialize at step

3,select “NO”.

SETUP

Initialize?

YES

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the follow-

ing checklist.

PROBLEM

No power.

CORRECTIVE ACTION

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

This unit does not respond to • Check if the power plug is connected to an AC outlet.

the remote control.

• Check the batteries in the remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

• You have to be within 23 feet of this unit.

• Check if the right mode is selected. If it’s not in the right mode, press the DVD or

VCR buttons, whichever you need, on the remote control.

• Check if a cassette tape is in this unit.

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-

ume up, then. If you hear some signal sound from the radio in response to your

pressing buttons on the remote, the remote control is working.

Timer recording is impossible. • Make sure the timer recording is set correctly.

• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTI-

TLE/T-SET button.

• Make sure the VCR clock is set correctly.

Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

• Activate this unit in VCR mode. Press the VCR button on the remote control so that the

green VCR OUTPUT light is lit.

(

)

Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL

buttons

on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the VCR is not in the Menu mode.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

Cannot view a tape but the

audio is OK.

No, or poor, playback picture.

TV programs cannot be seen

normally.

• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.

• Press the VCR/TV button.

•

Press the VCR button on the remote control to activate it in the VCR mode. Check if the green

VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.

You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

Video or color fades in and out when

making a copy of a video tape.

Cannot remove the tape.

• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control

to switch the mode.

No picture.

• Connect the video cables firmly.

• Insert a correct video disc that plays on this unit.

• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then

try other DVD features.

• Insert the disc.

• Clean the disc.

Disc cannot be played

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fingerprints, scratches, or

dusts on its surface.

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

No sound

• Correct the input settings on the audio component.

• This unit does not support DTS audio. This is not a malfunction.

• Connect this unit directly to the TV.

No DTS audio is output

Distorted picture

•

There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language

does not match the set up.

The camera angle cannot be

changed.

•

The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction.

The DVD does not contain sequences recorded from different camera angles.

This is not a malfunction.

•

Audio or subtitle language

cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.

screen, prohibiting an operation This is not a malfunction.

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual

for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

Some functions are prohibited on some discs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

• Designs and specifications are subject

to change without notice.

• If there is a discrepancy between lan-

guages, the default language will be

English.

Video Heads :

Operating temperature :

41°F (5°C) to 104°F (40°C)

Dimensions :

W : 17 3/16”(435mm)

H : 3 3/4” (94mm)

D : 9 3/16” (233mm)

Weight :

Four Heads

Output signal format :

NTSC color

Power source :

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption :

21 W (standby: 3.6W)

Approx 6lbs (2.7kg)

Language List

Language

Code

Language

French [FRE]

Frisian

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Code

Language

Macedonian

Malagasy

Malay

Code

Language

Siswat

Slovak

Slovenian

Somali

Code

A-B

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6565

6557

6558

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Malayalam

Maltese

Maori

Spanish [SPA]

Sundanese

Swahili

Marathi

Moldavian

Mongolian

Nauru

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Nepali

Norwegian [NOR]

O-R

Occitan

Bengali;Bangla

Bhutani

Bihari

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Chinese [CHI]

Corsican

Croatian

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Czech

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Korean [KOR]

Kurdish

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

F-H

Setswana

Shona

Sindhi

Faroese

Fiji

Finnish [FIN]

5261

5256

5255

Singhalese

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If

you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

Limited Warranty

FUNAI CORP. will repair this FUNAI product, free of charge in the USA in the

event of defect in materials or workmanship as follows:

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO

EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUEN-

TIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF

OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE

IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF

ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WAR-

RANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED

BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED

BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS

VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SER-

VICE FACILITY.

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts

without charge for one (1) year from the date of original retail

purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

FUNAI CORP. will provide the labor without charge for a peri-

od of ninety (90) days from the date of original retail pur-

chase.

LABOR:

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PUR-

CHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL

RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-

UCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU

MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT

ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE

CONTACT FUNAI CORP.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are

altered, replaced, defaced, missing or if service was attempted by an unau-

thorized service center. This FUNAI Limited warranty does not apply to any

product not purchased and used in the United States.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF

THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general

service procedure, please call 1-800-605-8610 or write to the following:

This warranty only covers failures due to defects in material or workmanship

which occurs during normal use. It does not cover damage which occurs in

shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse,

abuse, mishandling, misapplication, alteration, faulty installation, improper

maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-605-8610

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY

ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC

PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Conexiones

Activación de la unidad

por primera vez

Ajuste del reloj

Consulte la "Conexión básica del

televisor" en la página delantera

antes de utilizar esta unidad.

VCR

-MENU-

VCR

PROGRAMAR

AUTOREPETIR [OFF]

AJUSTE CANAL

B AJUSTE DE RELOJ

SELEC. IDIOMA

Canal de salida RF

Si el canal 3 se está utilizando para

una transmisión.

1)Programe su televisor al canal 4.

2)Inserte una cinta pregrabada en esta

unidad.

3)Pulse el botón OUTPUT en el

DVD/VCR para que se encienda la

luz VCR OUTPUT.

Encienda el televisor y sin-

tonice al canal 3.

• Si el canal 3 se está utilizando para una trans-

misión, vea la sección "Canal de salida RF".

•

Si no se ha ajustado el reloj,

aparece la pantalla AJUSTE

DE RELOJ cuando pulse el

botón MENU. En este caso,

vaya al paso (2).

• Si aparecen ruidos en la pantalla del

televisor,pulse el botón VCR/TV en

el mando a distancia.

4)Pulse una vez el botón PLAY.

5)Después de unos segundos, pulse el

botón PLAY en el DVD/VCR durante

3 segundos.

• El canal de salida RF cambiará del

canal 3 al canal 4 y podrá ver una

imagen reproducida.

• Cuando no aparezca una imagen en

la pantalla del televisor, repita el

paso (4).

POWER

Mando a distancia

Pantalla del televisor

SELEC. IDIOMA

ENGLISH

AJUSTE DE RELOJ

MES

0 3

DIA

– –

AÑO

– – – –

FRANCAIS

B ESPAÑOL

[ON]

HORA MINUTO AM/PM

– – – – – –

Seleccione el mes actual

AJUSTE DE RELOJ

MES

0 3

DIA

1 5

AÑO

– – – –

CA 01

6)Pulse el botón STOP para parar la

reproducción.

HORA MINUTO AM/PM

– – – – – –

AJUSTE AUTO

Instalación de las pilas

del mando a distancia

Seleccione el día actual

Conecta el cable de la caja de canales de cable o la

caja de satélite en la toma ANT IN de DVD/VCR?

AJUSTE DE RELOJ

MES

0 3

DIA

1 5

AÑO

2 0 0 4

HORA MINUTO AM/PM

– – – – – –

Pulse el botón

MENU para salir.

Seleccione el año actual

Conmutación VCR/DVD

POWER

ANGLE

SUBTITLE/

TIMER SET

No Espere unos minutos.

Después del escaneo

POWER

OPEN

SETUP

AUDIO

V.SURR

POWER

REC/OTR

REPEAT

AJUSTE DE RELOJ

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

VIDEO

AUDIO

A-B

REW

.FWD STOP/EJECT PLA

REC/OTR

CHANNEL

OUTPUT SELECT

PLAY

SKIP/FWD

C-RESET

CLEAR

SKIP/

SKIIP/

MES

0 3

DIA

AÑO

TOP MENU

MODE

RETURN

• El sintonizador se detiene en el canal

1 5 LUN 2 0 0 4

DISPLA

VCR

DVD

memorizado más abajo.

Botón VCR

Botón DVD

ENTER

HORA MINUTO AM/PM

0 5 – – – –

• Puede seleccionar sólo los canales memo-

rizados en esta unidad con los botones

CANAL.

STOP

PLA

VCR

DVD

Seleccione la hora actual

PAUSE

Luz

DVD OUTPUT

NA509

SPEED

SLO

VCR/TV

OUTPUT SELECT

SEARCH MODE

+10

Botón OUTPUT

AJUSTE DE RELOJ

Luz

MES

0 3

DIA

AÑO

VCR OUTPUT

1 5 LUN 2 0 0 4

HORA MINUTO AM/PM

0 5 4 0 – –

MODO VCR

Seleccione los minutos actuales

AJUSTE DE RELOJ

Pulse el botón VCR en el mando a dis-

tancia.

(Compruebe que está encendida la luz

VCR OUTPUT.)

MODO DVD

Pulse el botón DVD en el mando a dis-

tancia

(Compruebe que está encendida la luz

DVD OUTPUT.)

MES

0 3

DIA

AÑO

1 5 LUN 2 0 0 4

HORA MINUTO AM/PM

0 5

4 0

P M AM

B PM

Seleccione "AM" o "PM".

Nota

• Si pulsa sólo el botón OUTPUT en el

panel frontal NO conmuta el modo del

mando a distancia. DEBE seleccionar

también el modo correcto en el

mando a distancia.

Para salir de la pantalla AJUSTE DE

RELOJ.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Reproducción de la grabadora de vídeo

Reproducción de DVD/CD

Antes: Encienda el televisor y cambie al canal 3.

Antes: Encienda el televisor, amplificador y otros equipos que puedan estar

conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de

audio (de venta en los comercios) están en el canal correcto.

• Si el canal 3 se está utilizando para una transmisión, vea la

sección "Canal de salida RF".

VCR

POWER

DVD

SUBTITLE/

TIMER SET

VCR

DVD-V

STOP

PLAY

SETUP

STOP

AUDIO

V.SURR

ANGLE

Mando a distancia

Pantalla del televisor

PAUSE

POWER

PLAY

OPEN

REPRODUCIR

Mando a distancia

PLAY

Pantalla del televisor

STOP

POWER

OPEN

POWER

STOP

PARAR

EXPULSAR

REC

VIDEO

AUDIO

STOP/EJECT

VCR

DVD

DISC IN

PLAY

REW

F.FWD STOP/EJECT PLAY REC/OTR

ANNEL

OUTPUT SELECT

REV/SKIP STOP

PLAY SKIP/FWD

OPEN

3 4 2

4 3

1 5

Mando a distancia

Modo DVD

Modo de grabadora de vídeo

Disco/cinta

₍B_Oo_rdt_eó_nn_alfabético)

•Para seleccionar el canal.

•El botón +10 no tiene efecto

en el modo de grabadora de

vídeo.

•

Para seleccionar directamente

el capítulo o el título.

•

Para seleccionar directamente

la canción.

+10

•

Para buscar en avance/retroceso

en un disco.

Para empezar la reproducción en avance/

retroceso lento durante el modo de pausa.

•Para buscar en avance/

retroceso en un disco.

•Para el avance/retroceso

de una cinta.

POWER

•

Para seleccionar un ítem

en el menú de la grabadora

de vídeo.

Para avanzar al siguiente

menú de la grabadora de

vídeo.

Para volver un paso

durante el ajuste del reloj y

temporizador.

SUBTITLE/

ENTER

TIMER SET

•Para mover el cursor y

determinar su posición.

•Para mover el curso y

determinar su posición.

SETUP

AUDIO

V.SURR

ANGLE

REC/OTR

REPEAT

A-B

REPEAT

A-B

•Para repetir entre los puntos

A y B elegidos

•

Para repetir entre los puntos A

y B elegidos (disco compacto)

C-RESET

CLEAR

SKIP/

SKIIP/

ANGLE

•Para seleccionar los ángulos

de la cámara en un disco.

TOP MENU

MODE

RETURN

AUDIO

•Para seleccionar el idioma de •Para seleccionar ESTÉREO,

audio en un disco.

DISPLAY

L-CH o R-CH (disco compacto)

•Para borrar los marcadores.

VCR

DVD

(Disco compacto)

•Para salir del menú de la

grabadora de vídeo.

•Para reponer el contador de

cinta.

C-RESET

CLEAR

•Para borrar los marcadores.

•Para borrar los números

entrados incorrectamente.

•Para retirar el Nº de estado

en la entrada de programa.

•Para borrar los números

entrados incorrectamente.

ENTER

DISPLAY

DVD

•Para indicar el modo de

disco actual.

•Para indicar el modo de

disco actual.

•Para indicar la hora actual,

contador de cinta y canal.

STOP

PLAY

• Para seleccionar el modo de

salida de DVD

• Para seleccionar el modo

de salida de DVD.

• Para activar el mando a

distancia en el modo DVD.

•

Para activar el mando a

distancia en el modo DVD

PAUSE

•Para llamar el menu en un

disco.

•Para llamar el menú MP3

(MP3)

•Para llamar el menú de la

grabadora de vídeo.

MODE

NA509

SPEED

SLOW

•Para disponer el orden de

reproducción o la

reproducción aleatoria.

•Para activar/desactivar el

nivel del negro.

•

Para hacer una pausa de la

reproducción o grabación de la cinta.

Para avanzar la reproducción

un cuadro a la vez.

•Para hacer una pausa de

reproducción del disco.

•Para avanzar la reproducción

un cuadro a la vez.

• Para hacer una pausa en la

reproducción del disco.

VCR/TV

PAUSE

PLAY

SEARCH MODE

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

de la cinta.

+10

POWER

•Para activar o desactivar la

unidad.

•Para activar o desactivar la

unidad.

•Para activar o desactivar la

unidad.

REC/OTR

REPEAT

RETURN

• Para empezar una grabaciòn

o grabación de un toque.

•

Para reproducir repetidamente una

canción o disco (Disco compacto)

Para reproducir repetidamente una

canción, grupo o disco (MP3).

•

Para reproducir repetidamente

un capítulo o título.

•Para volver a la operación

previa en el menú de

programación de DVD.

•Para volver a la operación

previa en el menú de

programación de DVD.

•Para buscar un capítulo,

título u hora.

•Para buscar una canción.

SEARCH MODE

•

Para buscar la hora (Disco compacto)

•Para llamar el menú de

búsqueda de índice u hora.

•Para volver rápidamente a

un lugar o disco.

•Para volver rápidamente a

un lugar o disco.

Para o buscar los marcadores.

(Disco compacto)

•

•Para o buscar los

marcadores.

SETUP

•Para llamar el menú de

programación de DVD.

•Para llamar el menú de

programación de DVD.

•

Para cambiar de canal.

Para ajustar manualmente el

seguimiento durante la reproducción.

SKIP/

SKIIP/

• Para saltar capítulos

• Para saltar canciones.

SLOW

SPEED

• Para ver la cinta en cámara

lenta.

•Para seleccionar la velocidad

de grabación.

STOP

• Para parar la reproducción o

grabación.

• Para parar la grabación.

SUBTITLE/

TIMER SET

•

Para poner la grabadora de

vídeo en el modo de espera

para una grabación con temporizador.

•Para seleccionar subtítulos

en un disco.

TOP MENU

•

Para volver al archivo superior

de la jerarquía más alta en el

programa y menú MP3. (MP3)

•Para llamar el menú superior

en un disco.

•

Para seleccionar el modo de

salida de la grabadora de vídeo.

Para activar el mando a distancia

en el modo de la grabadora de vídeo.

VCR

VCR/TV

•

Para seleccionar la posición

de DVD o posición del televisor.

•

Para seleccionar la posición de

CD/MP3 o la posición del televisor.

•

Para seleccionar la posición de la

grabadora de vídeo o posición del televisor.

V.SURR

•Para activar/desactivar el

envolvente virtual.

•Para activar/desactivar el

envolvente virtual.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

Connections

Turn on the unit for the

Clock Set Up

first time

Please refer to “Basic TV

Connection” on the front page

before you use this unit.

VCR

-MENU-

VCR

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

RF Output Channel

If channel 3 is already occupied for

broadcasting,

1)Set your TV to channel 4.

2)Insert a pre-recorded tape into this

unit.

3)Press the OUTPUT button on the

DVD/VCR so that the VCR OUTPUT

light is lit.

Turn on the TV and set it

to channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

• If the clock is not set, the

CLOCK SET screen

appears when you press

the MENU button. In this

case, go to step [2].

• If noise appears on the TV screen

press the VCR/TV button on the

remote control.

POWER

Remote Control TV Screen

LANGUAGE SELECT

CLOCK SET

4)Press the PLAY button once.

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

MONTH DAY

0 3 – –

YEAR

– – – –

5)After a few seconds, press the PLAY

button on the DVD/VCR for 3 sec-

onds.

• The RF output channel will change

to channel 4 from channel 3 and you

will see a playback picture.

• When a picture does not appear on

the TV screen, repeat step [4].

6)Press the STOP button to stop play-

back.

HOUR MINUTE AM/PM

– – – – – –

Select the current month

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

– – – –

CH 01

HOUR MINUTE AM/PM

– – – – – –

Installing the Batteries

for the Remote Control

AUTO SET UP

Select the current day

Do you connect the cable from the cable box or

the satellite box to the DVD/VCR’s ANT IN jack?

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

YES

2 0 0 4

HOUR MINUTE AM/PM

– – – – – –

Yes Press the MENU

VCR/DVD Switching

button to exit

Select the current year

POWER

OPEN

POWER

ANGLE

No Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized

channel.

• You can select only the channels memo-

rized in this unit by using the CHANNEL

buttons.

SUBTITLE/

TIMER SET

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

VIDEO

AUDIO

REW

.FWD STOP/EJECT PLA

REC/OTR

CHANNEL

OUTPUT SELECT

PLAY

SKIP/FWD

SETUP

AUDIO

V.SURR

REC/OTR

REPEAT

REPEA

CLOCK SET

A-B

C-RESET

CLEAR

SKIP/

SKIIP/

MONTH DAY

YEAR

TOP MENU

MODE

RETURN

VCR button

DVD button

0 3 1 5 MON 2 0 0 4

DISPLAY

VCR

DVD

ENTER

HOUR MINUTE AM/PM

0 5 – – – –

VCR

DVD

DVD OUTPUT

light

STOP

PLA

Select the current hour

PAUSE

NA509

SPEED

OUTPUT SELECT

SLO

OUTPUT button

VCR/TV

SEARCH MODE

+10

VCR OUTPUT

light

CLOCK SET

MONTH DAY

YEAR

0 3 1 5 MON 2 0 0 4

VCR MODE

HOUR MINUTE AM/PM

0 5 4 0 – –

Press the VCR button on the remote

Select the current minute

CLOCK SET

control.

(Verify that the VCR OUTPUT light is lit.)

DVD MODE

Press the DVD button on the remote

control.

MONTH DAY

YEAR

0 3 1 5 MON 2 0 0 4

(Verify that the DVD OUTPUT light is lit.)

HOUR MINUTE AM/PM

0 5

4 0

P M AM

B PM

Note

Select “AM” or “PM”

• Pressing only the OUTPUT button on

the front panel DOES NOT switch the

mode of the remote control. You

MUST select the correct mode on the

remote control.

To exit the CLOCK SET

screen.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

VCR Playback

DVD/CD Playback

Before: Turn on the TV and set it to channel 3.

Before: Turn on the TV, amplifier and any other components which are con-

nected to this unit. Make sure the TV and audio receiver (commercially avail-

able) are set to the correct channel.

• If channel 3 is already occupied for broadcasting, see “RF

Output Channel” section.

POWER

SUBTITLE/

VCR

DVD

TIMER SET

VCR

DVD-V

STOP

PLAY

SETUP

AUDIO

V.SURR

ANGLE

Remote Control TV Screen

PAUSE

POWER

STOP

PLAY

OPEN

PLAYB

Remote Control TV Screen

PLAY

POWER

STOP

OPEN

STOP

POWER

STOP

EJECT A

REC

VIDEO

AUDIO

STOP/EJECT

VCR

DVD

DISC IN

PLAY

REW

F.FWD STOP/EJECT PLAY REC/OTR

ANNEL

OUTPUT SELECT

REV/SKIP STOP

PLAY SKIP/FWD

OPEN

3 4 2

1 5 4 3

Remote Control

VCR mode

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

DVD-V

MP3

VCR

•To select channel.

•The +10 button has no effect

in VCR mode.

•

To select chapter or title directly. •To select track directly.

+10

•To search forward/backward

through a disc.

To begin slow forward/reverse

playback during the pause mode.

•To search forward/backward

through a disc.

•To forward/backward a tape.

•

ENTER

• To select an item

POWER

SUBTITLE/

on the VCR Menu.

• To advance to the next

TIMER SET

•To move the cursor and

determine its position.

•To move the cursor and

determine its position.

VCR Menu.

To go back one step during

•

SETUP

AUDIO

V.SURR

ANGLE

clock and timer setting.

REPEAT

A-B

REC/OTR

REPEAT

A-B

•To repeat between your

chosen point A and B.

•To repeat between your

chosen point A and B. (CD)

ANGLE

AUDIO

C-RESET

CLEAR

•To select camera angles on

a disc.

SKIP/

SKIIP/

TOP MENU

MODE

RETURN

•To select audio languages on •To select STEREO,

a disc.

L-CH or R-CH. (CD)

•To clear the markers. (CD)

•To remove status No.

DISPLAY

•To clear the markers.

•To clear the numbers

entered incorrectly.

C-RESET

CLEAR

VCR

DVD

•To exit the VCR Menu.

•To reset the tape counter.

in program input.

•To clear the numbers

entered incorrectly.

ENTER

DISPLAY

DVD

•To display the current disc

mode.

•To display the current disc

mode.

•To display the current time,

tape counter, and channel.

• To select the DVD output

mode.

• To select the DVD output

mode.

• To activate the remote control

STOP

PLAY

•

To activate the remote control

in DVD mode.

•To call up the Menu

on a disc.

•To call up the MP3 menu.

(MP3)

MODE

•To call up the VCR Menu.

PAUSE

•To arrange the playing

order or play randomly.

NA509

SPEED

SLOW

•To set black level on/off.

• To pause tape playback or

recording.

•To advance playback

one frame at a time.

•To pause disc playback.

•To advance playback

one frame at a time.

• To pause disc playback.

PAUSE

VCR/TV

PLAY

• To begin disc playback.

• To begin tape playback.

SEARCH MODE

POWER

+10

•To turn the unit on or off.

REC/OTR

REPEAT

RETURN

• To start a recording or

One Touch Recording.

•To play a track or disc

repeatedly. (CD)

•To play a track, group or disc

•To play a chapter or title

repeatedly.

repeatedly. (MP3)

•To return to the previous

operation on the DVD setup

menu.

•To return to the previous

operation on the DVD setup

menu.

•To search track.

•To search time. (CD)

•To rapidly return to

a location of disc.

•To set or search the markers.

(CD)

•To search chapter, title or time.

•To rapidly return to

a location of disc.

•To set or search the markers.

SEARCH MODE

•To call up the index or time

search menu.

SETUP

•To call up the DVD setup

menu.

•To call up the DVD setup

menu.

• To change channels.

•

SKIP/

SKIIP/

To adjust the tracking manually

during playback.

• To skip chapters.

• To skip tracks.

SLOW

SPEED

• To view the tape

in slow motion.

•To select the recording speed.

STOP

• To stop playback.

• To stop playback or recording.

SUBTITLE/

TIMER SET

•To put the VCR into standby

mode for a timer recording.

•To select subtitles on a disc.

TOP MENU

•

To return to the top file of the

highest hierarchy in the program

and MP3 menu. (MP3)

•To call up the Top Menu

on a disc.

• To select the VCR output

mode.

• To activate the remote control

VCR

in VCR mode.

VCR/TV

• To select DVD position or

TV position.

• To select CD/MP3 position

or TV position.

• To select VCR position or

TV position.

V.SURR

•To set virtual surround on/off. •To set virtual surround on/off.

1VMN20107 / H9670UD ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Printed in China

KRK Speaker System VXT Series User Manual
Lenmar Enterprises Cell Phone PPW24 User Manual
LG Electronics Flat Panel Television RT 32LZ50 User Manual
Life Fitness Bicycle CR300 User Manual
Linak Automobile Parts Linear Actuator Technology User Manual
LOREX Technology DVR DGN209 User Manual
Mackie Musical Instrument RTA 31 User Manual
Marley Engineered Products Electric Heater 402A User Manual
Metabo Saw KGS 255 Plus User Manual
Microsoft Video Gaming Accessories X11 29974 02 User Manual