Magnavox DVD Player MDV437 User Manual
MDV437  
01-43_MDV437_37_eng.indd 1  
2007-01-31 4:49:36 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Class II equipment symbol  
This symbol indicates that the unit has  
a double insulation system  
3
01-43_MDV437_37_eng.indd 3  
2007-01-31 4:49:44 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
Environmental Information  
Laser Safety  
All unnecessary packaging has been  
omitted. The packaging has been made  
easy to separate into two materials;  
cardboard (box) and polyethylene (bags,  
protective foam sheet).  
This unit employs a laser. Due to possible  
eye injury, only a qualified service person  
should remove the cover or attempt to  
service this device.  
NOTE:  
Pictures shown maybe different  
between countries.  
Your DVD player consists of materials  
which can be recycled and reused if  
disassembled by a specialised company.  
Please observe the local regulations  
regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
CAUTION:  
WARNING LOCATION: ON THE  
BACKPLATE OF THE SET  
NEVER MAKE OR CHANGE  
CONNECTIONS WITH THE  
POWER SWITCHED ON.  
Manufactured under license from  
Dolby Laboratories, “Dolby”  
and the double-D symbol are  
trademarks of Dolby Laboratories.  
Copyright Notice: The making of  
unauthorized copies of copy-protected  
material, including computer programs, files,  
broadcasts and sound recordings, may be an  
infringement of copyrights and constitute a  
criminal offence. This device should not be  
used for such purposes.  
“ENERGY STAR and  
the ENERGY STAR  
mark are registered U.S.  
marks”  
WARNING  
To reduce risk of fire or electric shock, do not  
expose this appliance to rain or moisture. Use  
of controls or adjustments or performance of  
procedures other than herein may result in  
hazardous radiation exposure.  
ATTENTION  
L’utilisation des commandes ou réglages  
ou le non-respect des procédures ci-  
incluses peuvent se traduire par une  
exposition dangereuse à l’irradiation.  
The set complies with the FCC-Rules, Part 15  
and with 21 CFR 1040.10.  
ATENCIÓN  
Canada  
El uso de mando o ajustes o la ejecucción  
de métodos que no sean los aquí  
descritos puede ocasionar peligro de  
exposición a radiación.  
English:  
This digital apparatus does not exceed the  
Class B limits for radio noise emissions  
from digital apparatus as set out in the  
Radio Interference Regulations of the  
Canadian Department of Communications.  
Français:  
Cet appareil numérique n’emet pas de  
bruits radioélectriques dépassant les limites  
applicables aux appareils numériques de  
Class B prescrites dans le Règlemenet sur  
le Brouillage Radioélectrique édicté par le  
Ministère des Communications du Canada.  
4
01-43_MDV437_37_eng.indd 4  
2007-01-31 4:49:44 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English------------------------------------------6  
Français -------------------------------------- 44  
Español--------------------------------------- 84  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
For Customer Use:  
LASER  
Read carefully the information located at  
the bottom or rear of your DVD Video  
player and enter below the Serial No.  
Retain this information for future  
reference.  
Type  
Semiconductor laser  
InGaAlP (DVD)  
AIGaAs (CD)  
658 nm (DVD)  
790 nm (CD)  
Wave length  
Output Power 7.0 mW (DVD)  
10.0 mW (VCD/CD)  
Beam divergence 60 degrees  
Model No. 437  
Serial No. ___________________  
01-43_MDV437_37_eng.indd 5  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Care and Safety Information  
Setup.............................................................................................................................................................8  
Cleaning discs.............................................................................................................................................8  
General Information  
Accessories supplied ................................................................................................................................9  
Region codes...............................................................................................................................................9  
Connections  
Connecting to television.......................................................................................... 10-11  
Using Composite Video jacks (CVBS).............................................................................................. 10  
Using Component Video jacks (YPbPr)........................................................................................... 10  
Using an accessory RF modulator ......................................................................................................11  
Connecting the power cord...........................................................................................12  
Optional connections  
Connecting to a stereo system.....................................................................................13  
Stereo system has right/left Audio In jacks .................................................................................... 13  
Connecting to a digital AV receiver.............................................................................13  
Receiver has a PCM, Dolby Digital or MPEG decoder................................................................ 13  
Product Overview  
Front and Rear Panels....................................................................................................14  
Remote Control............................................................................................................. 15  
Getting Started  
Step 1: Inserting Batteries.............................................................................................16  
Using the remote control to operate the system......................................................................... 16  
Step 2: Finding your viewing channel...........................................................................16  
Step 3: Setting up Progressive Scan feature...............................................................17  
Step 4: Selecting the matching color system ............................................................ 18  
Step 5: Setting the language .........................................................................................19  
On-screen display (OSD) language.................................................................................................... 19  
Audio, Subtitle and DVD menu languages....................................................................................... 19  
Playback from Disc  
Playable discs.................................................................................................................. 20  
Supported formats.................................................................................................................................20  
Playback Features  
Starting disc playback ................................................................................................... 21  
Basic playback controls................................................................................................. 21  
Pausing playback...................................................................................................................................... 21  
Selecting title/chapter/track................................................................................................................ 21  
Stopping playback................................................................................................................................... 21  
Operations for video playback..................................................................................... 22  
Using the Disc Menu .............................................................................................................................22  
Zooming in...............................................................................................................................................22  
Resuming playback from the last stopped point............................................................................22  
Slow Motion.............................................................................................................................................22  
Forward / Reverse Searching..............................................................................................................22  
Selecting various repeat functions.............................................................................. 23  
Repeat play mode...................................................................................................................................23  
Repeating a section within a chapter/track.....................................................................................23  
6
01-43_MDV437_37_eng.indd 6  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Viewing the disc playback information ...............................................................24  
Title/Chapter/Track selection ............................................................................................................ 24  
Time Search............................................................................................................................................. 24  
Angle.......................................................................................................................................................... 24  
Special DVD Features................................................................................................... 25  
Playing a Title...........................................................................................................................................25  
Changing the Audio Language.............................................................................................................25  
Subtitles.....................................................................................................................................................25  
Special VCD and SVCD Feature.................................................................................. 25  
Playback Control (PBC)........................................................................................................................25  
Playing MP3/WMA/JPEG/Kodak/Fuji Picture CD................................................26-27  
General Operation................................................................................................................................26  
Playback selection ..................................................................................................................................26  
Zoom picture (JPEG) ............................................................................................................................ 27  
Playback with multi-angles (JPEG)..................................................................................................... 27  
DVD Menu Options  
Using the Language setup menu ................................................................................. 28  
OSD Language.........................................................................................................................................28  
Subtitle / Audio / DVD Menu..............................................................................................................28  
Using the Video setup menu...................................................................................29-31  
Setting the Aspect Ratio ......................................................................................................................29  
View Mode ...............................................................................................................................................30  
TV System ................................................................................................................................................30  
Video Out.................................................................................................................................................30  
Smart Picture........................................................................................................................................... 31  
Using the Audio setup menu...................................................................................32-33  
Digital Output......................................................................................................................................... 32  
Night Mode.............................................................................................................................................. 33  
Down Sampling....................................................................................................................................... 33  
Using the Rating setup menu..................................................................................34-35  
Rating level settings .........................................................................................................................34-35  
Changing the Password.........................................................................................................................35  
Using the Misc (Miscellaneous) setup menu.........................................................36-37  
Restoring to the original settings.......................................................................................................36  
Closed Caption....................................................................................................................................... 37  
Others  
Software upgrade .......................................................................................................... 38  
Specifications ................................................................................................................. 39  
Troubleshooting.......................................................................................................40~41  
Glossary........................................................................................................................... 42  
Limited Warranty.......................................................................................................... 43  
7
01-43_MDV437_37_eng.indd 7  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Safety Information  
DANGER!  
High voltage! Do not open the  
device. You run the risk of getting  
an electric shock.  
Cleaning discs  
Some problems occur because the disc  
inside the player is dirty (frozen picture,  
sound disruptions, picture distortions).  
To avoid these problems, discs should be  
cleaned on a regular basis.  
The machine does not contain any  
user-serviceable parts. Please leave  
all maintenance work to qualified  
personnel.  
To clean a disc, use a micro fibre cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
Setup  
Finding a suitable location  
– Place the set on a flat, hard and stable  
surface. Do not place the set on a  
carpet.  
– Do not put any equipment or heavy  
objects on top of the set.  
– Do not position the set on top of  
other equipment that might heat it up  
(such as receiver or amplifier).  
– Do not put anything under the set  
(such as CDs, magazines).  
– Install this unit near the AC outlet and  
where the AC power plug can be  
reached easily.  
CAUTION!  
Do not use solvents such as benzene,  
thinner, commercially available cleaners,  
or anti-static sprays intended for analog  
discs. Since the optical unit (laser) of the  
DVD player operates at a higher power  
than regular DVD or CD players,  
cleaning CDs intended for DVD or CD  
players may damage the optical unit  
(laser). Therefore, refrain from using a  
cleaning CD.  
Space for ventilation  
– Place the apparatus in a location with  
adequate ventilation to prevent  
internal heat build up. Allow at least  
10 cm (4.0”) clearance from the rear  
and the top of the set and 5cm (2.0”)  
from the left and right to prevent  
overheating.  
5cm (2.0")  
10cm (4.0")  
10cm (4.0")  
5cm (2.0")  
Avoid high temperatures, moisture,  
water and dust  
– Apparatus shall not be exposed to  
dripping or splashing.  
– Do not place any sources of danger  
on the apparatus (such as liquid filled  
objects, lighted candles).  
8
01-43_MDV437_37_eng.indd 8  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
Accessories supplied  
Region codes  
This DVD player is designed to support  
the Region Management System. Check  
the regional code number on the disc  
package. If the number does not match  
the player’s region number (see table  
below), the player may be unable to  
playback the disc.  
Video cable  
(yellow)  
Tips:  
– It may not be possible to play CD-R/RW  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
– If you are having trouble playing a certain  
disc, remove the disc and try a different one.  
Improper formatted disc will not played on  
this DVD player.  
Audio cable  
(white, red)  
Discs that can  
be played  
Region  
Remote  
control and  
two AAA  
batteries  
U.S.A. and  
Canada regions  
ALL  
1
2
3
4
5
6
U.K and  
Europe regions  
ALL  
ALL  
ALL  
ALL  
ALL  
Asia Pacific,  
Taiwan, Korea  
Australia,  
New Zealand,  
Latin America  
Russia and  
India regions  
China, Calcos Islands,  
Walls and Futuna  
Islands  
9
01-43_MDV437_37_eng.indd 9  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to television  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
AUDIO  
IN  
VIDEO IN  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
OUT  
(Pb/Cb)  
V
I
D
E
O
I
N
Y
1
2
DIGITAL  
OUT  
TV
AUDIO OUT  
COAXIAL  
COMPONENT VIDEO OUT  
COMPONENT VIDEO OUT  
IMPORTANT!  
IMPORTANT!  
– You only need to make one video  
connection from the following  
options, depending on the  
capabilities of your television.  
– Connect the DVD player directly  
to the television.  
– The progressive scan video quality  
is only possible when using YPbPr  
and a progressive scan television is  
required.  
Using ComponentVideo jacks  
(YPbPr)  
Using CompositeVideo jacks  
(CVBS)  
A Use the component video cables (red/  
blue/green) to connect the DVD player’s  
YPbPr jacks to the component video  
input jacks (or labeled as YPbPr) on the  
television (cable not supplied).  
A Use the composite video cable (yellow)  
to connect the DVD player’s TV OUT  
(CVBS) jack to the video input jack (or  
labeled as A/V In, Video In, Composite or  
Baseband) on the television (cable  
supplied).  
B To hear sound of this DVD player  
through your television, use the audio  
cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD player to  
the corresponding AUDIO IN jacks on  
the television (cable supplied).  
B To hear sound of this DVD player  
through your television, use the audio  
cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD player to  
the corresponding AUDIO IN jacks on  
the television (cable supplied).  
C Proceed to page 17 for detailed  
progressive scan setup.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
10  
01-43_MDV437_37_eng.indd 10  
2007-01-31 4:49:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (continued)  
RF coaxial cable to TV  
Back of RF Modulator  
(example only)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
1
DIGITAL  
OUT  
TV OUT  
AUDIO OUT  
COAXIAL  
COMPONENT VIDEO OUT  
IMPORTANT!  
C To hear sound of this DVD player  
through your TV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD player to the  
corresponding AUDIO IN jacks on the  
RF modulator (cable supplied).  
– If your television only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the  
DVD playback on the television. See  
your electronics retailer for details  
on RF modulator availability and  
operations.  
D Connect the Antenna or Cable TV  
service signal to the ANTENNA IN or RF  
IN jack on the RF modulator. (It may  
have been connected to your TV  
Using an accessory RF modulator  
previously. Disconnect it from the TV).  
A Use the composite video cable (yellow)  
to connect the DVD player’s TV OUT  
(CVBS) jack to the video input jack on  
the RF modulator.  
B Use the RF coaxial cable (not supplied) to  
connect ANTENNA OUT or TO TV jack  
on the RF modulator to the ANTENNA  
IN jack on the television.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
11  
01-43_MDV437_37_eng.indd 11  
2007-01-31 4:49:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (continued)  
Connecting the power cord  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
OUT  
~
AC MAINS  
(Pb/Cb)  
VIDEO IN  
DIGITAL  
OUT  
TV O  
AUDIO OUT  
COAXIAL  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
When no disc is loaded, press  
STANDBY ON on the DVD player  
front panel.  
“– – –” may appear on the display  
panel.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
12  
01-43_MDV437_37_eng.indd 12  
2007-01-31 4:49:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional connections  
Connecting to a stereo  
system  
Connecting to a digital AV  
receiver  
STEREO  
AV Receiver  
AUDIO  
IN  
AUDIO  
IN  
DIGITAL  
DIGITAL  
DIGITAL  
TV OUT  
OUT  
DIGITAL  
OUT  
TV OUT  
AUDIO OUT COAXIAL  
COMPONENT VIDEO OUT  
AUDIO OUT COAXIAL  
COMPONENT VIDEO OUT  
Receiver has a PCM, Dolby Digital  
or MPEG decoder  
Stereo system has right/ left Audio  
In jacks  
A Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on your television.  
A Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on your television.  
B Connect the COAXIAL jack of the DVD  
player to the corresponding Digital Audio  
In jack on your receiver (cable not  
supplied).  
B Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of the  
DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable supplied).  
C Set the DVD player’s digital output to  
PCM-Only or ALL depending on the  
capabilities of your receiver (see page 32  
{Digital Output}).  
Tip:  
– If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
13  
01-43_MDV437_37_eng.indCd aution: Do not touch the inner pins of the jacks on the rear panel.  
13  
2007-01-31 4:49:46 PM  
Electrostatis dischar
 
e ma
 
ca se
 
permanent dama
 
e to the s
 
stem  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Overview  
Front and Rear Panels  
STANDBY-ON  
–
Turns on the player or switches  
to standby mode  
PLAY/PAUSE u  
– Starts or interrupts playback.  
Disc Tray  
OPEN/CLOSEç  
STOP  
– Stops playback  
ꢀ
–
Opens or closes the disc tray.  
Display panel  
IR Sensor  
– Point the remote control towards  
this sensor  
–
Shows information about the  
current status of the DVD player.  
Mains (AC Power Cord)  
Connect to a standard AC outlet  
–
Audio Out (Left/Right)  
–
Connect to AUDIO inputs of an  
amplifier, receiver or stereo  
system  
YPbPr (Component Video Out)  
– Connect to YPbPr input of a TV  
COAXIAL (Digital audio out)  
CVBS (TV Out)  
– Connect to CVBS Video input  
of a TV  
–
Connect to coaxial AUDIO input  
of a digital audio equipment  
DIGITAL  
OUT  
TV OUT  
AUDIO OUT  
COAXIAL  
COMPONENT VIDEO OUT  
14  
01-43_MDV437_37_eng.indd 14  
2007-01-31 4:49:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Overview (continued)  
Remote Control  
DISPLAY  
OPEN/CLOSE  
– Opens or closes the disc tray  
–
Displays information on TV  
screen during playback  
0-9 numeric key pad  
– Selects numbered items in a  
menu  
1
–
To switch the DVD player  
to standby mode or ON  
RETURN/TITLE  
– To go back to previous  
menu/ show title menu  
SEARCH  
To start playback from  
designated point  
–
DISC MENU  
– Enters or exits the disc  
contents menu  
SETUP  
Enters or exits the system  
setup menu  
–
– Switches on or off the  
playback control mode (for  
VCD version 2.0 only and  
SVCD)  
ꢀ ꢁ ꢂ ꢃ  
–
Selects an item in the  
menu/ fast and slow  
forward/backward  
.
– Skip to previous title/  
chapter/ track  
OK  
–
Acknowledge menu  
selection  
>
– Skip to next title/ chapter/  
track  
STOP  
Stops playback  
SLOW  
ꢀ
–
u PLAY/PAUSE  
Starts or pauses playback  
MUTE  
Disables or enables sound  
output  
–
SUBTITLE  
– To access subtitle language  
system menu  
–
AUDIO  
– Selects an audio language  
(DVD/VCD) or an audio  
channel  
REPEAT  
Selects various repeat  
mode  
REPEAT A-B  
–
ANGLE  
– Selects a DVD camera angle  
–
Repeats playback a specific  
section on a disc  
ZOOM  
– Enlarge a picture on the TV  
screen  
SLOW  
–
Select a slow forward  
STEP  
–
Play the video frame by  
frame  
15  
01-43_MDV437_37_eng.indd 15  
2007-01-31 4:49:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1 : Inserting Batteries  
Step 2 : Finding your viewing  
channel  
A Press STANDBY-ON 2 on the DVD  
player to turn it on.  
B Turn on the TV and set it to the correct  
video-in channel. You should see the blue  
DVD background screen.  
ꢁUsually these channel are between the  
lowest and highest channels and may  
be called FRONT, A/V IN, VIDEO.  
See your TV’s manual for more  
details.  
A Open the battery compartment.  
B Insert two batteries type R03 or AAA,  
following the indications (+ –) inside the  
compartment.  
ꢁOr, you may go to channel 1 on your  
TV, then press the Channel down  
button repeatedly until you see the  
Video In channel.  
ꢁOr, the TV remote control may have  
a button or turn that chooses  
different video modes.  
C Close the cover.  
CAUTION!  
– Remove batteries if they are  
exhausted or if the remote is not to  
be used for a long time.  
– Do not use old and new or  
different types of batteries in  
combination.  
ꢁOr, set the TV to channel 3 or 4 if  
you are using an RF modulator.  
– Batteries contain chemical  
substances, so they should be  
disposed of properly.  
C If you are using external equipment, (such  
as audio system or receiver), turn it on  
and select the appropriate input source  
for the DVD player output. Refer to the  
equipment user’s manual for detail.  
Using the remote control to  
operate the system  
A Aim the remote control directly at the  
remote sensor (IR) on the front panel.  
B Do not put any objects between the  
remote control and the DVD player  
while operating the DVD player.  
16  
01-43_MDV437_37_eng.indd 16  
2007-01-31 4:49:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
G Select { P-Scan }, then press OK to  
confirm.  
Step 3 : Setting up  
Progressive Scan feature  
ꢁThe menu will appear on the TV.  
Activating Progressive Scan  
1.Ensure your TV system supports  
Progressive Mode  
(for Progressive Scan TV only)  
The progressive scan displays twice the  
number of frames per second than  
interlaced scanning (ordinary normal TV  
system). With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
2.If there is a distorted picture on  
the TV, wait 15 seconds for  
automatic recover  
NO  
Yes  
H Press ꢂto highlight { Yes } and press  
OK to confirm.  
ꢁThe menu will appear on the TV.  
Before you start...  
– Ensure that you have connected this  
DVD player to a progressive scan TV  
using the Y Pb Pr connection (see page  
10).  
Confirm again to use new setting  
Revert to original setting in 14 seconds  
Yes  
NO  
– Ensure that you have completed the  
basic installation and set-up.  
I Press ꢂto highlight { Yes } and press  
OK to confirm.  
J Turn on your TV progressive scan mode  
(refer to your TV user manual).  
ꢁThe setup is now completed and you  
can start enjoy the high quality  
picture.  
A Turn on your TV and set to interlace  
mode (refer to your TV user manual).  
B Press STANDBY ON 2 on the  
remote control to turn on the DVD  
player.  
To deactivate Progressive Scan  
manually:  
C Select the correct video-in channel.  
ꢁThe DVD background menu appears.  
ꢂWait for 15 seconds for the auto  
recovery.  
D Press SETUP.  
OR  
E Press ꢀꢁto select { Video }, then  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
press ꢃ.  
B Press numeric keypad ‘1’ on the  
remote control.  
Language  
Video  
Aspect Ratio  
: 4:3  
View Mode  
:Auto Fit  
TV System  
:NTSC  
ꢁThe DVD background screen appears.  
Video Out  
Interlaced  
Smart Picture  
P-Scan  
Audio  
Tip:  
– There are some progressive scan TVs and  
High-Definition TVs that are not fully  
compatible with this unit, resulting in the  
unnatural picture when playing back a DVD  
VIDEO disc in the progressive scan mode. In  
such a case, turn off the progressive scan  
feature on both the DVD player and your TV.  
Rating  
Misc  
F Press ꢀꢁrepeatedly to select { Video  
Out }, then press ꢃ.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
17  
01-43_MDV437_37_eng.indd 17  
2007-01-31 4:49:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
E Select a setting and press OK.  
ꢁFollow the instructions show on the  
TV to confirm the selection (if any).  
Step 4 : Selecting the  
matching color system  
Changing NTSC to PAL  
1.Ensure your TV system supports  
PAL Standard  
2.If there is a distorted picture on  
the TV, wait 15 seconds for  
automatic recover  
The color system of the DVD player, disc  
and TV should match in order for the  
disc to play. Before changing the TV  
system, determine the color system of  
your TV.  
Yes  
NO  
Confirm again to use new setting  
Revert to original setting in 14 seconds  
Language  
Video  
Aspect Ratio  
: 4:3  
View Mode  
:Auto Fit  
Yes  
NO  
TV System  
NTSC  
Video Out  
PAL  
Smart Picture  
Multi  
Audio  
F Press ꢂto highlight { Yes } and press  
OK to confirm.  
Rating  
Misc  
To reset to default TV color system:  
ꢂWait for 15 seconds for the auto  
recovery.  
OR  
A Press SETUP.  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
B Press ꢀꢁto select { Video }, then  
press ꢃ.  
B Press numeric keypad ‘3’ on the  
remote control.  
C Press ꢀꢁrepeatedly to select { TV  
System }, then press ꢃ.  
ꢁThe DVD background menu appears.  
D Use ꢀꢁto select one of the options  
Tips:  
below:  
– Before changing the current TV colour  
setting, ensure that your TV supports the  
‘selected TV System’.  
– If there is no proper picture on your TV,  
wait for 15 seconds for auto recovery.  
{ PAL }  
Select this if the connected TV has the  
PAL colour system. It will change the  
video signal of a NTSC disc and output it  
to PAL format.  
{ NTSC }  
Select this if the connected TV has the  
NTSC colour system. It will change the  
video signal of a PAL disc and output it to  
NTSC format.  
{ Multi }  
Select this if the connected TV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
18  
01-43_MDV437_37_eng.indd 18  
2007-01-31 4:49:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
Audio, Subtitle and DVD menu  
languages  
Step 5 : Setting the language  
You can choose your preferred language  
or sound track from audio, subtitles and  
DVD menu languages. If the selected  
language is not available on the disc, the  
disc’s default language will be used  
instead.  
The language options are different  
depending on your country or region. It  
may not correspond to the illustrations  
shown on the user manual.  
On-screen display (OSD) language  
Select this to change the language of this  
DVD player screen display menu.  
The menu language (on-screen display)  
for the system will remain as you set it.  
Language  
Video  
OSD Language : English  
Subtitle  
: Auto  
English  
French  
Audio  
DVD menu  
Audio  
Spanish  
Language  
Video  
OSD Language  
Subtitle  
English  
French  
Rating  
Spanish  
Audio  
Misc  
DVD menu  
Audio  
Rating  
A Press SETUP.  
Misc  
B Press ꢀꢁto select { Language }, then  
press ꢃ.  
C Press ꢀꢁto highlight one of the  
A Press SETUP.  
options below, then press ꢃ.  
B Press ꢀꢁto select { Language }, then  
{ Audio }  
Select this to change disc sound track  
language.  
press ꢃ.  
C Press ꢀꢁto select { OSD Language },  
then press ꢃ.  
{ Subtitle }  
Select this to change the subtitle language.  
D Use ꢀꢁto select a language and press  
OK to confirm.  
{ DVD menu }  
Select this to change the language of the  
disc menu.  
D Use ꢀꢁto select a language and press  
OK to confirm.  
E Repeat steps C - D for other language  
settings.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
19  
01-43_MDV437_37_eng.indd 19  
2007-01-31 4:49:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback from Disc  
IMPORTANT!  
– If the INVALID KEY appears on  
the TV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
Super Video CD  
MP3-Disc  
– DVD discs and players are designed  
with regional restrictions. Before  
playing a disc, make sure the disc is  
for the same zone as your player.  
Supported formats  
MP3/WMA tracks  
– The file extensions has to be ‘.mp3’,  
‘.wma’  
– JPEG/ISO format  
Playable discs  
– Maximum 15 characters display.  
– Supported sampling frequencies and  
corresponding bit-rates;  
Using this DVD player, you can playback  
on the following discs:  
32kHz  
44.1kHz, 48kHz  
64 – 320 kbps  
80 – 320 kbps  
DVD Video (Digital Versatile  
Disc)  
JPEG pictures  
– The file extensions has to be ‘.JPG’  
and not ‘.JPEG.’  
DVD RW (DVD Rewritable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
– JPEG/ISO format  
DVD R (DVD Recordable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
– It can only display DCF-standard still  
pictures or JPEG pictures such as  
TIFF.  
Tips:  
CD-R (CD-Recordable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
– Maximum 100 sessions for CD and 10  
multi border for DVD are supported.  
– For DVD-R and DVD-RW multi border,  
only finalized disc are supported.  
– For DVD+R and DVD+RW multi border  
both finalized and unfinalized disc are NOT  
supported.  
CD-RW (CD-Rewritable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
Audio CD (Compact Disc  
Digital Audio)  
Video CD  
(Formats 1.0, 1.1, 2.0)  
TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of  
the disc, or due to the condition of recording and authoring software that was used.  
20  
01-43_MDV437_37_eng.indd 20  
2007-01-31 4:49:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features  
Starting disc playback  
Basic playback controls  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
A Turn on the TV to the correct program  
number for the DVD player (e.g. ‘EXT’,  
‘0’, ‘AV’).  
B Press STANDBY-ON 2to turn on  
Pausing playback  
the DVD player.  
A During playback, press PLAY/PAUSE  
u to pause playback and display a still  
picture.  
C Press OPEN/CLOSE çon the front of  
the DVD player.  
ꢁSound will be muted.  
D Place a disc into the disc tray with the  
label facing up, then press OPEN/  
CLOSE ç.  
B To resume normal playback, press  
PLAY/PAUSE u again.  
ꢁFor double-sided discs, load the side  
which you want to play facing up.  
Selecting title/chapter/track  
E Playback may start automatically.  
ꢂPress PREV . / NEXT > to go  
to the previous or next title/chapter/  
track.  
If not, press PLAY/PAUSE u.  
ꢂIf a disc menu appears on the TV, see  
page 22 'Using the Disc Menu'.  
ꢂPress DISPLAY to display the disc  
information text line for title/chapter/  
track (example - 00/08).  
ꢂIf the child lock was activated for the  
inserted disc, you have to enter your  
four-digit password (see page 35).  
ꢂUse alphanumeric keypad (0-9) to  
enter valid title/chapter/track number,  
then press OK.  
ꢂFor more playback features, see pages  
21~27.  
ꢁThe playback skips to the selected  
title/chapter/track.  
Tips:  
– Do not overturn the DVD player while disc  
loading, playing or ejecting.  
– Do not close the disc tray manually even if  
the power switched off.  
Stopping playback  
ꢂPress STOP  
.
ꢀ
Tips:  
– Screen saver will start automatically if the  
disc playback is stopped for about 5 minutes.  
– The player will automatically switch to  
Power Standby mode if you do not press any  
buttons for about 20 minutes after the disc  
has stopped playing.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
21  
01-43_MDV437_37_eng.indd 21  
2007-01-31 4:49:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
ꢁPlayback restarts from the first title  
(DVD) or the beginning of the title/  
track (VCD/CDDA/SVCD).  
Operations for video  
playback  
ꢂTo remove the message from the TV  
screen, press DISPLAY.  
Using the Disc Menu  
Slow Motion  
Depending on the disc, a menu may  
appear on the TV screen once you load  
in the disc.  
You can slow forward or slow reverse a  
disc during playback and select a different  
speed.  
To select a playback feature or item  
ꢂUse ꢀꢁꢂꢃkeys or numeric  
keypad (0-9) on the remote, then press  
OK to start playback.  
For DVD,VCD,SVCD  
A Press ꢀꢁduring playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(forward or backward).  
To access or remove the menu  
ꢂPress DISC MENU on the remote.  
ꢁSound will be muted.  
B To return to normal speed, press PLAY/  
PAUSE u.  
Zooming in  
This function allows you to enlarge the  
picture on the TV screen and to pan  
through the enlarged picture.  
Tip:  
– Press SLOW to slow forward playback  
only.  
A During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
Forward / Reverse Searching  
You can fast forward or fast reverse a  
disc during playback and select a desired  
search speed.  
ꢁUse ꢀꢁꢂꢃkeys to pan through  
the enlarged picture.  
ꢁPlayback will continue.  
For DVD,VCD,SVCD,CD  
A Press ꢂꢃdirectly or press . >  
for 2 seconds during playback to select  
the required speed: 2X, 4X, 8X, 16X or  
32X (backward or forward).  
B Press ZOOM repeatedly to return to  
the original size.  
Resuming playback from the last  
stopped point  
ꢁSound will be muted (DVD/VCD) or  
intermittent (CD).  
Resume playback of the last 5 discs is  
possible, even if the disc was ejected  
(open) or standby. Auto resume is active  
for DVD,VCD,SVCD,CD types of discs.  
B To return to normal speed, press PLAY/  
PAUSE u.  
Tip:  
– For CD, fast forward or fast reverse is  
available only when pressing . > for  
few seconds or more.  
ꢂLoad one of the last 5 discs.  
ꢁ‘Play from start, press [PREV]’ appears  
during playback for first 10 seconds.  
ꢂDuring the message appears on the TV  
screen, press PREV to start playback  
from the beginning.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
22  
01-43_MDV437_37_eng.indd 22  
2007-01-31 4:49:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
Repeating a section within a  
chapter/track  
Selecting various repeat  
functions  
You can repeat the playback of a specific  
segment within a title/chapter track. To  
do this, you must mark the start and end  
of the segment you want.  
Repeat play mode  
The repeat play options vary depending  
on the disc type.  
A While playing a disc, press REPEAT A-  
B at your chosen starting point.  
A While playing a disc, press REPEAT  
B Press REPEAT A-B again at your  
chosen end point.  
continuously to choose a repeat options.  
ꢁThe section A and B can be set only  
within the same chapter/track.  
ꢁThe section will now repeat  
continuously.  
For DVD  
– Repeat Chapter (currently playing  
chapter)  
– Repeat Title (currently playing title)  
– Off (cancel)  
C To exit the sequence, press REPEAT  
A-B.  
For Video CD, Audio CD  
– Repeat Single (currently playing track)  
– Repeat All (entire disc)  
– Off (cancel)  
For MP3/WMA  
– Repeat Single (currently playing track)  
– Repeat All (current folder)  
– Off (cancel)  
For JPEG  
– Repeat Single (currently playing file)  
– Repeat All (current folder)  
– Off (cancel)  
Tip:  
– For VCD/SVCD, repeat playback is not  
possible if the PBC mode is switched on.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
23  
01-43_MDV437_37_eng.indd 23  
2007-01-31 4:49:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
Title/Chapter/Track selection  
Viewing the disc playback  
information  
A Press SEARCH.  
B Press ꢀꢁto select {Title} / {Chapter}  
You can view the disc information (such  
as current title/chapter/track number on  
the disc) without interrupting the disc  
playback.  
or {Track}.  
C Use the alphanumeric keypad 0-9 to  
input a valid number.  
D Press OK to confirm.  
ꢁThe playback skips to the chosen title/  
chapter/track.  
A During playback, press DISPLAY  
repeatedly on the remote control.  
ꢁThe available disc information appears  
on the TV screen with the following  
sequence.  
Time Search  
A Press SEARCH.  
Time  
Time  
00:03:36  
Chapter  
B Press ꢀꢁto select {Time}.  
(DVD)  
(DVD)  
(DVD)  
(DVD)  
(DVD)  
(VCD)  
(VCD)  
Title/Chapter  
Title  
C Use the alphanumeric keypad 0-9 to  
1 1  
6/16  
/
input the valid time (such as 0:34:27).  
Audio  
Audio  
Subtitle  
Subtitle  
Angle  
Angle  
D Press OK to confirm.  
ꢁThe playback skips to the chosen  
time.  
11  
/
D
D
D
6 Ch  
18 Eng  
/
Angle  
14  
/
14  
/
ꢂWhen {Angle} information appears on  
the TV screen, press ANGLE repeatedly  
to switch between different angle.  
Time  
Time  
00:00:56  
/21  
ꢁPlayback will go to the selected angle.  
Track  
Track  
3
Tip:  
– For DVDs with multiple angles, press  
ANGLE to display the right icon after the  
left entry appears on the TV screen.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
24  
01-43_MDV437_37_eng.indd 24  
2007-01-31 4:49:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
Special DVD Features  
SpecialVCD and SVCD  
Feature  
Playing aTitle  
Playback Control (PBC)  
A Press DISC MENU.  
ꢁThe disc title menu appears on the TV  
screen.  
For VCD with Playback Control  
(PBC) feature (version 2.0 only)  
B Use ꢀꢁꢂꢃkeys or alphanumeric  
ꢂPress DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
keypad 0-9 to select a play option.  
ꢁIf you select ‘PBC ON’, the disc menu  
(if available) will appear on the TV.  
ꢁUse the PREV . / NEXT > to  
turn to previous /next page or the  
alphanumeric keypad 0-9 to select a  
play option., then press OK.  
C Press OK key to confirm.  
Changing the Audio Language  
For DVD  
ꢂPress AUDIO repeatedly to select  
different audio languages.  
ꢂDuring playback,  
ꢁpressing PREV . after the first 5  
seconds, playback will start from the  
beginning of the current track,  
ꢁpressing PREV . within the first 5  
seconds, playback will go to the  
previous track.  
Changing the Audio Channel  
For VCD  
ꢂPress AUDIO to select the available  
audio channels provided by the disc  
(LEFT, RIGHT, MIX, STEREO).  
ꢂDuring playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
Subtitles  
ꢂPress SUBTITLE repeatedly to select  
different subtitle languages.  
If you want to skip the index menu  
and playback directly from the  
beginning,  
ꢂPress DISC MENU key on the remote  
control to turn to PBC off.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
25  
01-43_MDV437_37_eng.indd 25  
2007-01-31 4:49:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
Playback selection  
Playing MP3/WMA/JPEG/  
Kodak/Fuji Picture CD  
During playback, you can;  
ꢂPress PREV . / NEXT > to  
select the previous/next track/file in the  
current folder.  
IMPORTANT!  
You have to turn on your TV and set to  
the correct Video In channel. (See page ꢂPress ꢀꢁꢂꢃon the remote to  
16 ‘Finding your viewing channel’).  
rotate/flip the picture files.  
ꢂPress PLAY/PAUSE u repeatedly to  
General Operation  
pause/resume playback.  
A Load a disc.  
For MP3/WMA,  
ꢁThe disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
ꢁThe data disc menu and ID3 (MP3) /  
Meta data (WMA) information  
(including at least title, singer and  
album) appears on the TV screen.  
ꢂDuring playback,  
ꢁpressing PREV . after the first 5  
seconds, playback will start from the  
beginning of the current track,  
ꢁpressing PREV . within the first 5  
seconds, playback will go to the  
previous track.  
00:00:46  
02/20  
/MP3/07.....MP3  
Go Up  
07.----  
09.---  
ꢂDuring playback, press and hold PREV  
. / NEXT > for about few  
seconds to access fast forward or fast  
reverse with the required speed: 2X, 4X,  
8X, 16X or 32X.  
Filter  
: Off  
Repeat  
2002.---  
TAKE ME TO YOUR  
----  
---  
Music Playing  
----  
Title:----- Singer  
:-----  
Album Year:  
Comment:  
Tip:  
– For MP3/WMA, fast forward or fast  
reverse is available only when pressing .  
> for few seconds or more.  
B Press ꢀꢁto select the folder and press  
OK to open the folder.  
C Press ꢀꢁto select a track/file.  
D Press OK to confirm.  
Tips:  
– If the playing file is not selected, the ID3/  
Meta information will disappear.  
– If a jpeg file is selected, a preview will  
appear.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
26  
01-43_MDV437_37_eng.indd 26  
2007-01-31 4:49:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Features (continued)  
Zoom picture (JPEG)  
ꢂDuring playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
ꢂUse ꢀꢁꢂꢃto view the zoomed  
picture.  
Playback with multi-angles (JPEG)  
ꢂDuring playback, press ꢀꢁꢂꢃto  
rotate the picture on the TV screen.  
ꢀꢁ: flip the picture vertically by 180º  
ꢂ: rotate the picture anti-clockwise by  
90º  
ꢃ: rotate the picture clockwise by 90º  
Tip:  
– It may not be possible to play certain  
MP3/JPEG disc due to the configuration and  
characteristics of the disc or condition of the  
recording.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
27  
01-43_MDV437_37_eng.indd 27  
2007-01-31 4:49:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options  
OSD Language  
This DVD Player setup is carried out via  
the TV, enabling you to customize the  
DVD player to suit your particular  
requirement.  
This menu contains various language  
options for the language displayed on the  
screen. For details, see page 19.  
Subtitle/Audio/DVD Menu  
Using the Language setup  
menu  
These menus contains various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 19.  
A Press SETUP on the remote control.  
ꢁThe system setup menu appears.  
Language  
Video  
OSD Language  
Subtitle  
:English  
:Auto  
Audio  
:English  
:English  
DVD Menu  
Audio  
Rating  
Misc  
B Press ꢀꢁto select { Language }, then  
press ꢃ.  
C Press ꢀꢁto select an item, then press  
ꢃto access.  
Example: { OSD Language }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
D Use ꢀꢁto select a setting and press  
OK to confirm.  
Example: { English }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
28  
01-43_MDV437_37_eng.indd 28  
2007-01-31 4:49:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Setting the Aspect Ratio  
Using theVideo setup menu  
The picture shape can be adjusted to fit  
your TV and the format must be available  
on the playback disc. Otherwise, the TV  
display will not affect the picture during  
playback.  
A Press SETUP on the remote control.  
ꢁThe system setup menu appears.  
A In ‘Video’, press ꢀꢁto select { Aspect  
Language  
Video  
Aspect Ratio  
View Mode  
TV System  
Video Out  
: 4:3  
Ratio }, then press ꢃ.  
:Auto Fit  
:NTSC  
{ 4:3 }  
:Interlaced
:Standard
Select this if you have a  
normal TV. A ‘wide-  
screen’ display with  
black bars on the top  
and bottom will be  
displayed on the TV screen.  
Smart Picture  
Audio  
Rating  
Misc  
{ 16:9 }  
B Press ꢀꢁto select { Video }, then  
Select this for  
wide-screen TV  
(frame ratio  
16:9).  
press ꢃ.  
C Press ꢀꢁto select an item, then press  
ꢃto access.  
Example: { Aspect Ratio }  
ꢁThe options for the selected item  
appears.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
D Use ꢀꢁto select a setting and press  
OK to confirm.  
Example: { 4:3 }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
29  
01-43_MDV437_37_eng.indd 29  
2007-01-31 4:49:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
View Mode  
TV System  
Use view mode to scale an image that fits  
to the TV screens’ width and height.  
This menu contains the options for  
selecting the color system that matches  
the connected TV. For details, see page  
18.  
A In ‘Video’, press ꢀꢁto select { View  
Mode }, then press ꢃ.  
{ Fill }  
Video Out  
Select this to scale the image up or down  
in horizontal and vertical directions  
respectively to fill the screen height and  
width.  
This setting allows you to toggle the  
output of the video signal between  
Interlaced and P-Scan (Progressive Scan).  
A In ‘Video’, press ꢀꢁto select { Video  
{ Original }  
Select this to fit the original screen size  
(only for MPEG/Picture CD).  
Out }, then press ꢃ.  
{ Interlaced }  
Select this for Interlaced connection.  
{ Height Fit }  
{ P-Scan }  
Select this to scale the image up or down  
in vertical direction to fit the screen  
height.  
Select this when you want to make  
progressive scan (YPbPr) connection on  
your DVD player to a progressive scan  
TV.  
{ Width Fit }  
Select this to scale the image up or down  
in horizontal direction to fit the screen  
width.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
{ Auto Fit }  
Select this to take the minimum value of  
horizontal and vertical fit scale ratio (like  
letter box).  
{ Pan Scan }  
Select this to take the maximum value of  
horizontal and vertical fit scale ratio.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
30  
01-43_MDV437_37_eng.indd 30  
2007-01-31 4:49:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
D Press ꢀꢁto highlight one of the  
Smart Picture  
following options.  
This DVD player provides four  
predefined sets of picture color settings.  
BRIGHTNESS  
Increase the value to brighten the picture  
or vice versa. Choose zero (0) for  
average setting.  
A In ‘Video’, press ꢀꢁto select { Smart  
Picture }, then press ꢃ.  
{ Standard }  
Select this for a preset standard picture  
setting.  
CONTRAST  
Increase the value to sharpen the picture  
or vice versa. Choose zero (0) to  
balance the contrast.  
{ Vivid }  
Select this to make the picture brighter.  
{ Cool }  
TINT  
Select this to make the picture softer.  
Increase the value to darken the picture  
or vice versa. Choose zero (0) for  
average setting.  
{ Personal }  
Select this to personalize your picture  
color by adjusting the brightness,  
contrast, tint and color (saturation).  
COLOR  
Increase the value to enhance the color  
in your picture or vice versa. Choose  
zero (0) to balance the color.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
C If you select {PERSONAL}, then proceed  
to steps D~G.  
E Press ꢂꢃto adjust the setting that best  
suits your personal preference.  
ꢁThe setup menu appears.  
F Repeat steps D~E for adjusting other  
color features.  
Brightness  
Contrast  
Tint  
0
0
0
0
G Press OK to confirm.  
Color  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
31  
01-43_MDV437_37_eng.indd 31  
2007-01-31 4:49:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Digital Output  
Using the Audio setup menu  
Select this if you connect to a  
multichannel decoder/receiver.  
A Press SETUP on the remote control.  
A In ‘Audio’, press ꢀꢁto select { Digital  
ꢁThe system setup menu appears.  
Output }, then press ꢃ.  
{ All }  
Language  
Video  
DigitalOutput  
NightMode  
DownSampling  
:All  
Select this if the connected device has a  
built-in multichannel decoder that  
supports one of the multichannel audio  
format (Dolby Digital, MPEG-2).  
:Off
:On
Audio  
{ PCM }  
Rating  
Misc  
Select this if the connected device is not  
capable of decoding multichannel audio.  
The DVD player will convert the Dolby  
Digital and MPEG-2 multichannel signals  
to PCM (Pulse Code Modulation).  
B Press ꢀꢁto select { Audio }, then  
{ Off }  
press ꢃ.  
To deactivate the digital audio output.  
For example, if you use the AUDIO OUT  
jacks to connect to a TV or stereo  
system.  
C Press ꢀꢁto select an item, then press  
ꢃto access.  
Example: { Night Mode }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
Tips:  
– If { Digital Output } is set to { All }, all  
audio settings except MUTE are invalid.  
– If { Digital Output } is set to { All } while  
playback MPEG, MP3/WMA files, the player  
will output PCM signals.  
D Use ꢀꢁto select a setting and press  
OK to confirm.  
Example: { On }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
32  
01-43_MDV437_37_eng.indd 32  
2007-01-31 4:49:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Down Sampling  
Night Mode  
You can enable and disable the digital  
signal for better sound output quality.  
This mode optimizes playback of sound at  
low volume. High volume outputs will be  
softened and low volume outputs are  
brought upward to an audible level.  
A In ‘Audio’, press ꢀꢁto select { Down  
Sampling }, then press ꢃ.  
A In ‘Audio’, press ꢀꢁto select { Night  
{ On }  
Mode }, then press ꢃ.  
Playback a disc recorded at the sampling  
rate of 48kHz.  
{ On }  
Select this to set low volume output. This  
feature is only available for movie discs  
with Dolby Digital mode.  
{ Off }  
Playback a disc recorded at the sampling  
rate of 96kHz. This rate can only be  
achieved in Stereo-Classic (Flat) mode.  
{ Off }  
Turns off night mode feature. Select this  
to enjoy the surround sound with its full  
dynamic range.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
33  
01-43_MDV437_37_eng.indd 33  
2007-01-31 4:49:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Rating level settings  
Using the Rating setup menu  
Depending on the DVD, you may be  
asked to change the parental level while  
playing the disc. The rating levels are  
from 1 to 8 and are country dependent.  
You can prohibit the playing of certain  
discs that are not suitable for your  
children, or have certain discs played with  
alternative scenes.  
A Press SETUP on the remote control.  
ꢁThe system setup menu appears.  
Language  
Video  
Parentalcontrol  
:8.Aduit  
Set Password  
A In ‘Rating’, press ꢀꢁto select { Parental  
Audio  
control }, then press ꢃ.  
Rating  
Misc  
B Use the alphanumeric keypad 0-9 to  
enter the four-digit password (see page  
35 ‘Changing the Password’, then press  
OK.  
ꢁThe menu appears on the TV screen.  
B Press ꢀꢁto select { Rating }, then  
{ 1.Kid Safe }  
Childsafe; acceptable for viewers of all  
ages.  
press ꢃ.  
C Press ꢀꢁto select an item, then press  
ꢃto access.  
{ 2. G }  
Example: { Parental control }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
General Audience; recommended as  
acceptable for viewers of all ages.  
{ 3. PG }  
Parental Guidance suggested.  
{ 4. PG – 13 }  
Unsuitable for children under age 13.  
D Use ꢀꢁto select a setting and press  
OK to confirm.  
{ 5. PG – R }  
Parental Guidance; recommended that  
parents restrict children under 17 from  
viewing.  
Example: { 8 Adult }  
ꢁThe setting is selected and setup is  
complete.  
{ 6. R }  
E To exit, press SETUP.  
Restricted; recommended only when  
supervised by a parent or adult guardian.  
{ 7. NC – 17 }  
No Children under age 17; not  
recommended viewing for children under  
age 17.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
34  
01-43_MDV437_37_eng.indd 34  
2007-01-31 4:49:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
{ 8. Adult }  
Changing the Password  
Mature Material; should be viewed only  
by adults due to graphic sexual material,  
violence or language.  
You need to enter your four-digit  
password to play a prohibited disc or if  
prompted for a password.  
C Use ꢀꢁto select a rating level and  
press OK to confirm.  
A In ‘Rating’, press ꢀꢁto select { Set  
Password }, then press OK.  
ꢁSelect { 8 Adult } to disable parental  
level and allow all discs to play.  
ꢁYou will be prompted to enter your  
four-digit password.  
ꢂDVDs that are rated higher than the level  
you selected will not play unless you  
enter your four-digit password.  
Enter Password  
B Use the alphanumeric keypad 0-9 to  
enter the four-digit password, then press  
OK.  
Tips:  
– This feature will not limit viewing if the  
disc manufacturer did not code the disc.  
– VCD, SVCD, CD have no level indication,  
so parental control has no effect on these  
type of discs. This also applies to most illegal  
DVDs.  
– Some DVDs are not coded with a rating  
though the movie rating may be printed on  
the disc cover. The rating level feature does  
not prohibit play of such discs.  
ꢁWhen doing this for the first time,  
enter the default password ‘0000’.  
ꢂIf you forget your old four-digit  
password, enter the default password  
‘0000’.  
C Press OK again to enter the new four-  
digit password.  
ꢁThe new four-digit password will now  
take effect.  
Enter New Password  
D Press OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
35  
01-43_MDV437_37_eng.indd 35  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Restoring to the original settings  
Using the Misc  
(Miscellaneous) setup menu  
Setting the { Default } function will reset  
all options and your personal settings to  
the factory defaults, except your  
password for rating level.  
A Press SETUP on the remote control.  
A In ‘Misc’, press ꢀꢁto select { Use  
Default Settings }, then press OK.  
ꢁThe menu will appear.  
ꢁThe system setup menu appears.  
Language  
Use Default Settings  
Closed Caption˖ꢀꢀꢀOff  
Use Default Settings  
Video  
Audio  
YES  
NO  
Rating  
{ Yes }  
Misc  
Select this to reset to factory default  
settings.  
{ No }  
B Press ꢀꢁto select { Misc }, then press  
Select this to close the menu.  
ꢃ.  
B Use ꢂꢃto select a setting and press  
C Press ꢀꢁto select an item, then press  
OK to access.  
OK to confirm.  
Example: { Use Default Settings }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
D Use ꢂꢃto select a setting and press  
OK to confirm.  
Example: { No }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
36  
01-43_MDV437_37_eng.indd 36  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options (continued)  
Closed Caption  
Closed caption are data that are hidden  
in the video signal of some discs.  
Captions are different from subtitles  
because captions hearing are impaired by  
showing the sound effects (e.g., “phone  
ringing” and “footsteps”), while subtitles  
do not. Before you select this function,  
ensure that the disc contains closed  
captions information and your TV set  
also has this function.  
A In ‘Misc’, press ꢀꢁto select { Closed  
Caption }, then press ꢃ.  
{ On }  
Enable closed caption.  
{ Off }  
Disable closed caption.  
B Use ꢀꢁto select a setting and press  
OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press ꢂto go back to previous menu item. Press SETUP to exit the menu item.  
37  
01-43_MDV437_37_eng.indd 37  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Software upgrade  
Periodically Philips will issue software  
upgrade to enhance your user  
experience.  
IMPORTANT!  
– Power supply must not be  
interrupted during upgrade!  
To check the current software version of  
this DVD player;  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
ꢁThe disc tray will open.  
B Press numeric keypad ‘966’ on the  
remote control.  
ꢁThe software installed in the DVD  
player appears on the TV screen.  
To download and install the latest  
software to the DVD player;  
A Visit the Philips website ‘www.philips.  
com/support’ to check the availability of  
the latest software upgrade.  
B Download the software to a CD-R.  
ꢁThe menu appears.  
Firmware Update  
Erase and Program  
Start  
Cancel  
C Press ꢂꢃto select {Start}, then press  
OK to confirm.  
Firmware Update  
Programming, please wait......  
Do not switch the player off!  
ꢁThe latest software will be  
downloaded in the DVD player.  
38  
01-43_MDV437_37_eng.indd 38  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV STANDARD(PAL/50Hz)(NTSC/60Hz)  
Number of lines 625 525  
Playback Multistandard(PAL/NTSC)  
AUDIO PERFORMANCE  
DA Converter  
DVD  
24 bit, 192 kHz  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
VIDEO PERFORMANCE  
SVCD  
Video DAC  
YPbPr  
Video Output  
12 bit, 108 MHz  
0.7 Vpp ~ 75 ohm  
1Vpp ~ 75 ohm  
fs 44.1kHz 4Hz- 20kHz  
fs 44.1kHz 4Hz- 20kHz  
> 90 dB  
CD/VCD  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
Distortion/noise (1kHz)  
MPEG MP3  
> 80 dB  
> 70 dB  
> 65 dB  
MPEG Audio L3  
VIDEO FORMAT  
Digital  
MPEG 2 for DVD,SVCD  
MPEG 1 for VCD  
Compression  
DVD  
50Hz  
60Hz  
CONNECTIONS  
Horiz. resolution 720 pixels  
Vertical resolution 576 lines  
720 pixels  
480 lines  
YPbPr Output  
Video Output  
Cinch 3x  
Cinch (yellow)  
Audio Output(L+R)Cinch (white/red)  
VCD  
50Hz  
60Hz  
Digital Output  
1 coaxial  
Horiz. resolution 352 pixels  
Vertical resolution 288 lines  
352 pixels  
240 lines  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
AUDIO FORMAT  
Digital  
MPEG/ AC-3/  
PCM  
compressed  
Digital  
CABINET  
Dimensions (w x h x d)  
360 x 37 x 209 mm  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
Weight Approximately 1.298 kg  
MP3(ISO 9660) 96, 112, 128, 256  
320kbps &  
POWER CONSUMPTION  
Power Supply Rating  
Power consumption  
Power consumption in  
Standby mode  
variable bit rate  
fs, 32, 44.1, 48 kHz  
Analog Sound Stereo  
Dolby Surround compatible downmix from Dolby  
Digital multi-channel sound  
120V; 60Hz  
< 10 W  
< 1 W  
39  
01-43_MDV437_37_eng.indd 39  
2007-01-31 5:03:24 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer for  
help.  
Problem  
Solution  
No power.  
–
Press STANDBY-ON button on the front of the DVD  
player to turn on the system.  
–
–
Make sure the AC outlet has power.  
Remote control does not work.  
Aim the remote control directly at the sensor on the front  
of the DVD player (not towards TV).  
–
Remove any obstacles between DVD player and the remote  
control.  
–
–
Batteries are weak, replace the batteries.  
Check the polarities of the batteries are as indicated on the  
remote control ( signs).  
No picture.  
–
Turn on your TV and set to the correct Video In channel  
for the DVD player. You may go to Channel 1 on your TV,  
then press the channel down button on your TV’s remote  
control until you see the TV program.  
–
–
Check the video connection between the DVD player and  
the TV.  
The disc does not match with the TV color system standard  
(PAL/NTSC).  
The disc is dirty, clean the disc.  
Sometimes a small amount of picture distortion may  
appear. This is not a malfunction.  
The picture is distorted or black &  
white during playback.  
–
–
–
To deactivate progressive scan function manually;  
1) Turn off your TV progressive scan mode (or set to  
interlaced mode)  
2) Press OPEN/CLOSE to open the DVD player disc tray.  
3) Press the alphanumeric keypad ‘1’.  
–
–
Check the audio connections, the red and white jacks are  
connected correctly.  
Set the Digital output correctly, based on the equipment you  
connected to the DVD player.  
No sound.  
–
–
–
Insert the disc with the label facing up.  
Wrong region code.  
Wrong disc type. Read chapter “Playback from Disc -  
Playable discs” for details.  
Disc does not play.  
–
–
Make sure the disc is not scratched or warped. Clean the  
disc or replace a new one.  
Check if the disc is defective by trying another disc.  
–
–
The aspect ratio is fixed on the DVD disc.  
Depending on the TV, it may not be possible to change the  
aspect ratio.  
The aspect ratio of the screen cannot  
be changed.  
40  
01-43_MDV437_37_eng.indd 40  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Problem  
Solution  
–
–
Press STOP button twice before selecting the setup/system  
menu.  
Depending on the disc availability, some menu items cannot  
be selected.  
Not able to select some items in the  
setup/system menu.  
–
–
Insert a readable disc with the playback side facing down.  
Check the disc type, color system (PAL/NTSC) and region  
code.  
The DVD player does not start  
playback.  
–
–
–
Check for any scratches or smudges on the disc.  
Press SETUP to turn off the setup menu screen.  
You may need to enter the password in order to change the  
parental rating level or to unlock the disc for playback.  
Moisture may have condensed inside the system. Remove the  
disc and leave the system turned on for about an hour.  
Disconnect the power cord from the power outlet for a few  
minutes. Reconnect the power cord and try to operate again  
as usual.  
–
–
–
–
Check the disc for fingerprint/scratches and clean with a soft  
cloth wiping from center to edge.  
Picture freezes momentarily during  
playback.  
Check that the output of the video signal is turn to  
{ Interlaced }.  
Unable to select Progressive Scan on/  
off.  
41  
01-43_MDV437_37_eng.indd 41  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound  
has specific numerical values. These jacks send  
audio through two channels, the left and right.  
Parental Control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image. The  
horizontal vs. vertical ratio of conventional TVs. is  
4:3, and that of wide-screens is 16:9.  
software’s level is higher than the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
AUDIO OUT Jacks: Jacks on the back of the  
DVD System that send audio to another system  
(TV, Stereo, etc.).  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on  
a Video CD or SVCD that supports PBC, you can  
enjoy interactive-type software as well as software  
having a search function.  
Bit Rate: The amount of data used to hold a  
given length of music; measured in kilobits per  
seconds, or kbps. Or, the speed at which you  
record. Generally, the higher the bit rate, or the  
higher the recording speed, the better the sound  
quality. However, higher bit rates use more space  
on a Disc.  
Progressive Scan: It displays all the horizontal  
lines of a picture at one time, as a signal frame.  
This system can convert the interlaced video from  
DVD into progressive format for connection to a  
progressive display. It dramatically increases the  
vertical resolution.  
Chapter: Sections of a picture or a music piece  
on a DVD that are smaller than titles. A title is  
composed of several chapters. Each chapter is  
assigned a chapter number enabling you to locate  
the chapter you want.  
Region code: A system for allowing discs to be  
played back only in the region designated  
beforehand. This unit will only play discs that have  
compatible region codes. You can find the region  
code of your unit by looking on the product label.  
Some discs are compatible with more than one  
region (or ALL regions).  
Component Video Out Jacks: Jacks on the  
back of the DVD System that send high-quality  
video to a TV that has Component Video In jacks  
(R/G/B, Y/Pb/Pr, etc.).  
Disc menu: A screen display prepared for  
allowing selection of images, sounds, subtitles,  
multi-angles, etc recorded on a DVD.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or  
the entire album in audio software. Each title is  
assigned a title number enabling you to locate the  
title you want.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks. These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
TV OUT jack: Jack on the back of the DVD  
System that sends video to a TV.  
WMA: Windows Media Audio. Refers to an  
audio compression technology developed by  
Microsoft Corporation. WMA data can be  
encoded by using Windows Media Player version 9  
or Windows Media Player for Windows XP. Files  
are recognized by their file extension “WMA.”  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing up to  
six channels of digital audio (front left and right,  
surround left and right, center and subwoofer).  
JPEG: A very common digital still picture format.  
A still-picture data compression system proposed  
by the Joint Photographic Expert Group, which  
features small decrease in image quality in spite of  
its high compression ratio.  
MP3: A file format with a sound data  
compression system. ‘MP3’ is the abbreviation of  
Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3. By using MP3 format, one CD-R or  
CD-RW can contain about 10 times as much data  
volume as a regular CD can.  
42  
01-43_MDV437_37_eng.indd 42  
2007-01-31 4:49:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAGNAVOX LIMITED WARRANTY  
NINETY (90) DAY  
WARRANTY COVERAGE:  
MAGNAVOX warranty obligation is limited to the terms set  
forth below.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, misapplication, or non-Magnavox product, (b) to  
damage caused by service performed by anyone other than  
Magnavox or Magnavox Authorized Service Location, (c) to a  
product or a part that has been modified without the written  
permission of Magnavox, or (d) if any Magnavox serial number  
has been removed or defaced, or (e) product, accessories or  
WHO IS COVERED:  
Magnavox warrants the product to the original purchaser or  
the person receiving the product as a gift against defects in  
materials and workmanship as based on the date of original pur- consumables sold “AS IS” without warranty of any kind by  
chase (“Warranty Period”) from an Authorized Dealer. The  
original sales receipt showing the product name and the pur-  
chase date from an authorized retailer is considered such proof.  
including refurbished Magnavox product sold “AS IS” by some  
retailers.  
This Limited Warranty does not cover:  
WHAT IS COVERED:  
•
•
Shipping charges to return defective product to Magnavox.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation  
or repair of antenna systems outside of the product.  
Product repair and/or part replacement because of improper  
installation, connections to improper voltage supply, abuse,  
neglect, misuse, accident, unauthorized repair or other cause  
not within the control of Magnavox.  
The Magnavox warranty covers new products if a defect arises  
and a valid claim is received by Magnavox within the Warranty  
Period. At its option, Magnavox will either (1) repair the prod-  
uct at no charge, using new or refurbished replacement parts,  
or (2) exchange the product with a product that is new or  
which has been manufactured from new, or serviceable used  
parts and is at least functionally equivalent or most comparable  
to the original product in Magnavox current inventory, or (3)  
refund the original purchase price of the product.  
•
•
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Magnavox warrants replacement products or parts provided  
under this warranty against defects in materials and workman-  
ship from the date of the replacement or repair for ninety (90)  
days or for the remaining portion of the original product’s war-  
ranty, whichever provides longer coverage for you. When a  
product or part is exchanged, any replacement item becomes  
your property and the replaced item becomes Magnavox’ prop-  
erty. When a refund is given, your product becomes Magnavox’  
property.  
•
•
Damage occurring to product during shipping.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for  
which it was designed, manufactured, approved and/or  
authorized, or repair of products damaged by these modifica-  
tions.  
•
•
•
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Product lost in shipment and no signature verification receipt  
can be provided.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
Failure to operate per Owner’s Manual.  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all require-  
ments can result in delay.  
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO  
RICO, OR U.S. VIRGIN ISLANDS…  
Contact Magnavox Customer Care Center at:  
1-800-705-2000  
WHAT IS NOT COVERED - EXCLUSIONS AND LIM-  
ITATIONS:  
This Limited Warranty applies only to the new products manu-  
factured by or for Magnavox that can be identified by the trade-  
mark, trade name, or logo affixed to it. This Limited Warranty  
does not apply to any non-Magnavox hardware product or any  
software, even if packaged or sold with the product. Non-  
TO OBTAIN ASSISTANCE IN CANADA…  
1-800-661-6162 (French Speaking)  
1-800-705-2000 - (English or Spanish Speaking)  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
Magnavox manufacturers, suppliers, or publishers may provide a SUMER. MAGNAVOX SHALL NOT BE LIABLE FOR ANY  
separate warranty for their own products packaged with the  
bundled product.  
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED  
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
ON THIS PRODUCT IS LIMITED IN DURATION TO THE  
Magnavox is not liable for any damage to or loss of any pro-  
grams, data, or other information stored on any media con-  
tained within the product, or any non-Magnavox product or  
part not covered by this warranty. Recovery or reinstallation of DURATION OF THIS WARRANTY.  
programs, data or other information is not covered under this  
Limited Warranty.  
Some states do not allow the exclusions or limitation of inci-  
dental or consequential damages, or allow limitations on how  
long an implied warranty lasts, so the above limitations or  
exclusions may not apply to you.  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026  
3121 233 48911  
43  
01-43_MDV437_37_eng.indd 43  
2007-01-31 4:49:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Indoor Furnishings K10A123 User Manual
Land Pride Brush Cutter RCP2660 User Manual
Linear TV Receiver DXR 701 User Manual
Loewe Flat Panel Television ConceptL26 User Manual
LSI Network Card U160 User Manual
Mackie Speaker SRM350 User Manual
Makita Power Hammer HR500 User Manual
Maytag Washer MAV7600 User Manual
Metra Electronics Car Satellite Radio System 99 9303 User Manual
Midland Radio Portable Radio 74 250C User Manual