Evolution eKeys49 Keyboard User Manual
EVOLUTION
e-Keys49
Tested To Comply With
FCC Standards
FOR HOME OR OFFICE USE
Modifications not authorized by the manufacturer may void users authority to operate this
device.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
VST is a trademark of Steinberg Soft– und Hardware GmbH
ASIO is a trademark of Steinberg Soft– und Hardware GmbH
DirectX is copyright 2002 Microsoft
Sound Studio II, PictureBoard and Music Teacher are copyright 2003 Evolution Electronics Ltd
All rights reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Introduction
Congratulations on your purchase of the Evolution eKeys 49 computer music package.
The package contains the eKeys 49 USB music keyboard along with software covering
diverse approaches to learning and making music on your PC computer.
PictureBoard is an exciting tool for general early learning and musical fun. You can play
sounds and trigger pictures using the eKeys 49 keyboard which helps to teach essentials
such as numbers, animal names and the alphabet. Comes with a huge collection of pic-
tures and soundsets to keep everyone entertained.
Music Teacher contains lessons and practise guides so you can learn from scratch or
simply run through a quick refreshment course. Use the software to grade your ability to
play both notes and rhythm.
Sound Studio is your complete PC recording studio. Record tracks using both MIDI and
audio, and use the extensive editing tools and other features to make professional sound-
ing compositions.
We hope you will have as much fun playing and working with eKeys 49 as we had
creating it. Now it’s time to unleash your creativity.
Features List
Ports:
Software:
·
·
MIDI OUT
USB MIDI OUT/IN
·
·
·
PictureBoard
Music Teacher
Sound Studio II
Power:
·
·
USB powered
DC IN for external PSU
Keyboard:
·
·
·
·
·
·
·
49 note velocity sensitive keyboard
Pitchbend wheel
Modulation wheel
Volume/control slider
Sustain foot pedal socket
Octave +/- buttons
Advanced functions button
Download from Www.Somanuals.com. All Manuals Search And Download.
22
3
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
What’s In The Package?
Standard MIDI Controller numbers (MIDI CC's)
Your Evolution eKeys49 package should contain the following items:
· Evolution eKeys49 USB keyboard
· User Manual
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Bank Select
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
Controller 46
Controller 47
Gen Purpose 1 LSB
Gen Purpose 2 LSB
Gen Purpose 3 LSB
Gen Purpose 4 LSB
Controller 52
Controller 53
Controller 54
Controller 55
Controller 56
Controller 57
Controller 58
Controller 59
Controller 60
Controller 61
Controller 62
Controller 63
Sustain Pedal
Portamento
92
Tremelo Depth
Chorus Depth
Modulation
93
· eKeys49 Installer CD-ROM
· USB cable
Breath Control
Controller 3
94
Celeste (De-tune)
Phaser Depth
95
Foot Control
Porta Time
96
Data Increment
Data Decrement
Non-Reg Param LSB
Non-Reg Param MSB
Reg Param LSB
Reg Param MSB
Controller 102
Controller 103
Controller 104
Controller 105
Controller 106
Controller 107
Controller 108
Controller 109
Controller 110
Controller 111
Controller 112
Controller 113
Controller 114
Controller 115
Controller 116
Controller 117
Controller 118
Controller 119
97
If any of the above listed items are missing, please contact the retailer you purchased the
product from.
Data Entry
98
Channel Volume
Balance
99
About The Manual
This instruction manual covers the operation of the eKeys 49 USB keyboard. We do not
explain how to set it up, however with third party music software, most programs will work
straight away with the eKeys 49 keyboard.
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
Controller 9
Pan
Expression
Effects Controller 1
Effects Controller 2
Controller 14
Controller 15
Gen Purpose 1
Gen Purpose 2
Gen Purpose 3
Gen Purpose 4
Controller 20
Controller 21
Controller 22
Controller 23
Controller 24
Controller 25
Controller 26
Controller 27
Controller 28
Controller 29
Controller 30
Controller 31
Bank Select LSB
Modulation LSB
Breath Control LSB
Controller 35
Foot Control LSB
Porta Time LSB
Data Entry LSB
Channel Volume LSB
Balance LSB
Controller 41
Pan LSB
To learn about the included software PictureBoard, Music Teacher and Sound Studio,
please insert the eKeys 49 Installer CD-Rom and click “Software Installation”. Once in-
stalled you can read more about how to operate these great programs in their respective
help menus.
Sostenuto
Soft Pedal
Before You Connect Your Keyboard…
Legato Pedal
Hold 2
You are probably eager to plug in your eKeys 49 keyboard and get started, but it’s
sensible to check the installation documentation first.
Sound Variation
Resonance
Release Time
Attack Time
You can power the keyboard either via USB or an optional external power supply. Use
only one method at a time.
Cut-off Frequency
Controller 75
Controller 76
Controller 77
Controller 78
Controller 79
Gen Purpose 5
Gen Purpose 6
Gen Purpose 7
Gen Purpose 8
Portamento Control
Controller 85
Controller 86
Controller 87
Controller 88
Controller 89
Controller 90
Channel Mode Messages
Power & Connection Via USB
120
121
122
123
124
125
126
127
All Sound off
1.
2.
Check that the on/off button on the back of the unit is set to “Off”.
Plug in the USB cable provided with the eKeys49 keyboard to a free USB port
on your computer.
Reset all Controllers
Local Control
All Notes Off
3.
Plug in the other end of the USB cable to the USB socket on
Omni Off
the eKeys49 keyboard.
Omni On
Mono On (Poly Off)
Poly On (Mono Off)
The single USB cable not only powers the keyboard but also sends MIDI data to and from
your computer system.
Extra RPN Messages
Windows XP & Mac OS X
128
129
130
131
Pitch Bend sensitivity
Fine Tune
Coarse Tune
Channel Pressure
If you are using Windows XP or Mac OS X you can now simply switch the power position
to “on”. Because the eKeys 49 keyboard is class compliant it will work with out any further
installation.
Expression LSB
Controller 44
Download from Www.Somanuals.com. All Manuals Search And Download.
4
21
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Installing Drivers For Windows 98/ME
Useful MIDI data
1.
2.
Power up your PC.
Insert the eKeys49 Installer CD-ROM.
General MIDI Instruments
The installer should open automatically. If not, select run from the start menu and
type d:\setup.exe where 'd' is your CD-ROM drive, then press ENTER.
Click on 'install drivers'.
Piano
Bass
Reed
Synth Effects
3.
4.
5.
6.
Follow instructions on screen.
0 Acoustic Grand Piano 32 Acoustic Bass
1 Bright Acoustic Piano 33 Electric Fingered
2 Electric grand Piano Bass
64 Soprano Sax
65 Alto Sax
66 Tenor Sax
96 SFX Rain
97 SFX Soundtrack
98 SFX Crystal
99 SFX Atmosphere
100 SFX Brightness
101 SFX Goblins
102 SFX Echoes
103 SFX Sci-Fi
When finished exit setup.
Switch on the eKeys49.
3 Honky Tonk Piano
4 Electric Piano 1
5 Electric Piano 2
6 Harpsichord
34 Electric Picked Bass 67 Baritone Sax
35 Fretless Bass
36 Slap Bass 1
37 Slap Bass 2
38 Syn Bass 1
39 Syn Bass 2
68 Oboe
Windows will proceed with the installation of a USB driver and a MIDI driver. Once
completed, you are ready to go. Windows will ask you to restart your computer.
69 English Horn
70 Bassoon
71 Clarinet
7 Clavinet
Chromatic Percussion Strings/Orchestra
Pipe
Ethnic
Installing Drivers For Windows 2000
8 Celesta
40 Violin
41 Viola
42 Cello
43 Contrabass
44 Tremolo Strings
45 Pizzicato Strings
46 Orchestral Harp
47 Timpani
72 Piccolo
73 Flute
74 Recorder
75 Pan Flute
76 Bottle Blow
77 Shakuhachi
78 Whistle
104 Sitar
105 Banjo
1.
2.
Power up your PC.
9 Glockenspiel
10 Music Box
11 Vibraphone
12 Marimba
13 Xylophone
14 Tubular bells
15 Dulcimer
Insert the eKeys49 Installer CD-ROM.
106 Shamisen
107 Koto
108 Kalimba
109 Bag Pipe
110 Fiddle
111 Shanai
The installer should open automatically. If not, select run from the start menu and
type d:\setup.exe where 'd' is your CD-ROM drive, then press ENTER.
Click on 'Driver Installer'.
3.
4.
5.
6.
Follow instructions on screen.
79 Ocarina
Synth Lead
When finished exit setup.
Organ
Ensemble
Percussive
Switch on the eKeys49 keyboard.
Windows will automatically recognise the keyboard and ask for the E-Keys
Installer CD-ROM.
Select the CD-ROM drive and click OK.
Windows will then ask you to select the CD-ROM drive again for the MIDI driver.
If Windows reports the drivers have not been digitally signed, click on
'Continue Installation'.
16 Drawbar Organ
17 Percussive Organ
18 Rock Organ
19 Church Organ
20 Reed Organ
21 Accordion
22 Harmonica
48 String Ensemble 1
49 String Ensemble 2
(Slow)
50 Syn Strings 1
51 Syn Strings 2
52 Choir Aahs
53 Voice Oohs
54 Syn Choir
80 Syn Square Wave
81 Syn Sawtooth Wave 113 Agogo
82 Syn Calliope
83 Syn Chiff
84 Syn Charang
85 Syn Voice
86 Syn Fifths Sawtooth 118 Syn Drum
Wave
87 Syn Brass & Lead
Synth Pad
112 Tinkle Bell
7.
8.
114 Steel Drums
115 Woodblock
116 Taiko Drum
117 Melodic Tom
9.
10.
11.
Select the drive once more.
Click OK and you are ready to go.
23 Tango Accordion
119 Reverse Cymbal
55 Orchestral Hit
Brass
Guitar
Sound Effects
Once installation is complete, you will be asked to re-start your PC.
24 Nylon Acoustic
25 Steel Acoustic
26 Jazz Electric
27 Clean Electric
28 Muted Electric
29 Overdrive
56 Trumpet
57 Trombone
58 Tuba
59 Muted Trumpet
60 French Horn
61 Brass Section
61 Syn Brass 1
62 Syn Brass 2
88 New Age Syn Pad
89 Warm Syn Pad
90 Polysynth Syn Pad
91 Choir Syn Pad
92 Bowed Syn Pad
93 Metal Syn Pad
94 Halo Syn Pad
120 Guitar Fret Noise
121 Breath Noise
122 Seashore
123 Bird Tweet
124 Telephone Ring
125 Helicopter
Using An External Power Supply
You can also use a mains adapter (not included) with the following specification: 9V DC
output, 250-300mA, centre positive.
30 Distorted
31 Harmonics
126 Applause
127 Gun Shot
95 Sweep Syn Pad
Make sure you are not powering the eKeys 49 keyboard already via USB, then simply plug
in the power supply to the socket labelled DC 9V and switch the power on.
Note: Do not leave the adapter plugged in for long periods of time if the unit is not in
use.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
5
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Getting Started
Assuming the installation process was completed successfully, it is now time to have a
closer look at the eKeys49 keyboard. However, at the moment, when you press a key you
will not hear any sound. This is because when you press a key, the keyboard sends out
MIDI data. MIDI data gives instructions on how a sound should play, but in order to hear
that sound you need some software which can read this MIDI data, and play sound back
accordingly. We have provided such software on the Evolution eKeys 49 Installer CD-
ROM.
M-AUDIO Deutschland (Germany)
Kuhallmand 34
D-74613 Ohringen
Germany
Sales Information: 07941 98 7000
Sales Information(e-mail): [email protected]
Technical Support: 07941 98 70030
Technical Support (e-mail): [email protected]
Fax: 07941 98 70070
If you have not done so already, install 'PictureBoard’ from the CD-ROM. To do this in-
sert the CD-ROM and click on 'Software Installer'. Make sure 'PictureBoard' is selected
for installation. When the installation is complete, open PictureBoard.
PictureBoard is a great piece of software that will play a sound, and trigger an image
when a key is pressed.
M-AUDIO Canada
1400 St. Jean-Baptiste Ave., #150
Quebec City,
The piano set should automatically have been opened for you. If not, click on 'Open' and
select the 'Piano.MB' file.
QC G2E 5B7
Canada
Press a key on the keyboard. You should now hear a piano, and see a key on the on-
screen keyboard in PictureBoard light up.
If you do not see this, click on the preferences menu and select 'MIDI devices'. Select
the eKeys49 as the MIDI input device.
Tel: 1-866-872-0444
Fax: 1-478-872-0034
Email: [email protected]
The Piano set in PictureBoard enables you to play the keyboard like a grand piano. Go
on – give it a try!
Evolution Electronics Ltd. (UK)
8 Church Sq.
Leighton Buzzard,
Beds,
LU7 1AE
United Kingdom
The Keys
Each white key on the eKeys 49 is labelled with a letter and a number. The letter repre-
sents the note you play, and the number represents the octave ('octave' is explained in
the next section).
Although the black keys are not labelled, they also have names. The name of a black
key will be something like F#4 or Eb2.
Sales Information: +44 (0) 1525 372621
Sales Information (e-mail): [email protected]
Technical Support: +44 (0) 1525 218999
Technical Support (e-mail): [email protected]
Fax: +44 (0) 1525 383228
If a black key is expressed with a # sign, it is referring to the black key above the white
note. For example F#3 refers to the black key above F3.
If a black key is expressed with a b sign, it is referring to the black key below the white
note. For example Eb3 refers to the black key below E3.
So, as an example, the black Key between C3 and D3 is both C#3 and Db3.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
19
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Contact Details
Octave
An octave contains 12 notes. Each octave is marked out clearly on your eKeys 49
keyboard, by black and white sections starting on C. Each octave is given a number.
For additional files, help or drivers for this product, it is best to look on our main website
Play the bottom note on the keyboard, C1. You will see it lights up the bottom note on the
onscreen keyboard in PictureBoard. Now press C2. The key that now lights up on the
PictureBoard keyboard is 1 octave higher.
If you have any questions, comments or suggestions about this product, or any other M-
Audio or Evolution product, we invite you to contact us directly by using the following
information:
Now press the octave '+' button once. The light above the octave '-' button will go out,
indicating the keyboard is now playing an octave higher.
M-AUDIO US
45 E. Saint Joseph St.
Arcadia, CA 91006-2861
U.S.A
Press the bottom note, C1 on the keyboard again. You will now see the key that lights up
on the on-screen keyboard of PictureBoard, is the same key as when you pressed note
C2 previously. If you press the Octave '+' key again, you will play the next C up, and so
on. It is possible to shift the keyboard up 4 octaves or down 3 octaves from 0 octave shift.
To shift the octave downwards, press the octave '-' key.
Sales information : 626-445-2842
Sales information (e-mail): [email protected]
Technical Support: 626-445-8495
Technical Support (e-mail): [email protected]
Fax: 626-445-7564
Now press both the octave '+' and '-' keys together. Both LED's will now be lit. This
returns the octave shift to 0.
If both the lights are on above the Octave '+' or '-' buttons, you know you have an octave
shift of 0. If the light is only above the octave '-' key, the octave shift is down. If the light
is above the octave '+' key, the octave shift is up.
M-AUDIO UK
Unit 5, Saracen Industrial Park
Mark Rd.
Pitchbend Wheel
Hemel Hempstead,
Herts,
HP2 7BJ
As the name indicates, the pitch bend wheel is usually used to bend the notes played on
the keyboard, up or down. Press and hold a key while moving the wheel and you will get
the idea. This allows you to play phrases not normally associated with keyboard playing,
including guitar style riffs.
England
Your sound source determines how far you can bend the note. Its typically set to
2 semitones but can be up to 2 octaves +/-.
Sales Information: 01442 416 590
Sales Information(e-mail): [email protected]
Technical Support: 01309 671 301
Technical Support (e-mail): [email protected]
Fax: 01442 246 832
Modulation Wheel
The modulation wheel is, as implied, typically used for modulation of the sound you are
playing. This type of real-time controller was originally introduced on electronic
keyboard instruments to give the performer the option of for instance adding vibrato just
like players of acoustic instruments do.
M-AUDIO Japan
2-18-10 Marunouchi 6F
Naka-Ku, Nagoya 460-0002
Japan
Just like the pitch bend wheel, the modulation wheel is fully MIDI assignable. To find out
how, read the section “Basic Programming Operations” on page 17.
Tel: 81-52-218-3375
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
18
7
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Trouble-Shooting
Volume Slider
My Evolution hardware suddenly stopped working after having performed fine since
installation.
Switch off the unit and leave for 10 seconds. Then restart your computer and try again. If the
problem persist you may have to re-install drivers for the unit.
Now try adjusting the Volume slider as you play. This slider sends a MIDI message that
controls the volume of the notes you are playing. You will hear the sound is louder as you
move the slider upwards.
The volume slider can be assigned to different effects such as pan (balance), attack, re-
verb and chorus and many more. How to do this is explained in the 'Advanced Functions'
Section.
My drivers are listed in the Device Manager and are said to be working OK, but the
keyboard is not recognised in any software.
Win2000 and XP have a limitation to how many MIDI device drivers you can have installed at
any one time. There is no indication that you are using the maximum number of drivers - the
drivers will install as if there is not a problem.
Foot Switch
above question. You will find a link to an exe file that will solve this problem for you.
You can plug any polarity foot switch (not included) in to the foot switch socket on your
Evolution keyboard. The keyboard will automatically detect the correct polarity on power
up. If you want to reverse the polarity, just make sure the pedal is pressed when you
switch on your keyboard.
I have plugged in a sustain pedal to my Evolution keyboard, but it works the wrong
way round.
The foot switch is normally used for sustaining the sound you are playing without having
to keep your hands on the keyboard, just like a piano.
The polarity of the sustain pedal is calculated by the keyboard when it is powered up. On
power up, the sustain pedal is assumed to be in the OFF position. So, if you want the sustain
pedal to be off when it is unpressed, make sure the pedal is unpressed when you power up.
When I press a key, there is a delay before I hear any sound.
This delay is known as latency.
Setting up the Software
Before you use the software, it's a good idea to set it up so that it is communicating with
the eKeys49 properly. Once you have set this up, your settings will be saved so that each
time you open the software, it will be communicating with the eKeys 49 straight away.
Latency with MIDI signals is due to the soft-synth you are using. MIDI data is simply control
data. The MIDI is read by the soft-synth. The soft-synth then completes a large number of
complex calculations, in order to produce the sound you hear. All this takes time.
If you have not done so already, install Music teacher v3.0 and Sound Studio II. Open up
Music Teacher or Sound Studio II by double-clicking on the icon on your desktop. Play
the eKeys49 keyboard. Can you hear any sound? If so all is good and you can go on to
set up the other program.
We recommend getting a proper soundcard. You can get a decent one these days for under
£30. If you already have an adequate sound card, try re-installing the latest drivers for the
sound card, or try reducing the buffer sizes of the audio drivers. You can do this in the Sound
Studio II and Sound Studio Pro II programs by going to 'Audio' – 'Audio system settings'
where you can reduce the buffer sizes of the MME or ASIO drives.
If not select 'Devices...' from the Options menu ('MIDI Devices' in Sound Studio II). Here
you have a list of MIDI inputs and outputs. Make sure the eKeys 49 is selected as the
MIDI input device. If you plugged the eKeys 49 straight in to Windows XP and are not using
Evolution's drivers, the eKeys49 will be called 'USB Audio Device'. In all other cases, the
eKeys49 will be called 'USB MIDI in'.
I can’t get any sound from my Evolution Software.
In your software go to Options|Devices. Here you will see a list of MIDI Inputs and MIDI
outputs.
If you have MIDI inputs available, if no driver names appear in the Output column, you need
to re-install your soundcard or update the soundcard drivers.
In the MIDI Outputs you should select the output with 'synth' or 'synthesis' in the name.
Make sure it is the only MIDI output that is selected. Selected devices are highlighted
blue.
The output column allows you to choose which output driver you want for generating the MIDI
sounds. Most soundcards will have an option such as "FM synth" or "SBLive Synth". Click on
these driver names to use the sounds of your soundcard for playback of MIDI data. If you just
have a sound chip, the software synth to select may be like "Microsoft SW synth". Click on
the driver name of your choice.
Click on 'OK' to save the settings. You should now be able to hear a piano sound when
you play the eKeys49. If not, go back in to Devices and select the next MIDI output. Click
to de-select the previous MIDI output and click 'OK'. Try the eKeys49 again. Repeat this
process for each MIDI output in turn until you can hear sound.
Rule of Thumb: If you have numerous output drivers enabled (highlighted in blue) and
cannot hear any output, de-select all but one of them and try again. Repeat this
process until you hear some sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
17
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Advanced Functions
Reset All Controllers
We will use Sound Studio II to learn about the advanced functions of the keyboard.
If you find there is an effect on a voice that you do not want, rather than having to worry about
what that effect may be, you can send a 'Reset all Controllers' MIDI message to set all effects
to 0. To send a 'Reset all Controllers' message:
If you have not done so already, install Sound Studio II from the Evolution eKeys 49
installer CD-ROM.
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the Black Key above C3 (named C#3), representing RESET ALL CONTROLLERS.
Edit mode will exit, and there will no longer be any effects on the voice, allowing you to
start from scratch.
To do this, insert the CD-ROM, click on 'Software installer' and make sure Sound Studio II
is selected for installation.
Open Sound Studio II.
Using The eKeys49 With Other MIDI Devices
The eKeys49 uses standard MIDI messages, and so it is not just limited to the software on the
CD-ROM. You can use the E-Keys49 with any other device, or software you may have that is
capable of receiving MIDI messages.
Sound Studio II is a MIDI Sequencer. A MIDI sequencer can receive MIDI messages from
the keyboard, but does not generate sound of it's own. Instead it is able to store the MIDI
data and provide powerful editing to the MIDI data. It will then map the data received from
the Keyboard to a MIDI output device. In most cases this MIDI output device will be the in-
built MIDI synthesizer on your PC. This is called the 'MS Wavetable Synth'. If you have a
special soundcard, it is better to use the MIDI synth of your soundcard. Be advised that
some soundcards do not have MIDI synths however, and in this case you can use the MS
wavetable synth.
MIDI Out
On the back of the keyboard you find the MIDI output port which you can connect to an exter-
nal sound module or MIDI keyboard. By default (I.e. when you switch the unit on), all control-
ler data is sent out via the MIDI output as well as the USB out.
Play the keyboard. You should see the keys on the on-sceen keyboard in Sound Studio II
light up, and hear a piano sound. If not, refer to the previous section, ‘Setting up the
software’.
If you want the MIDI output to act like a traditional USB-to-MIDI interface, engage “MIDI out
from USB” mode by carrying out the following instructions:
About The ‘Advanced Functions’ Button
·
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the black key above D2 (named D#2), representing MIDI OUT FROM USB.
Edit mode will finish.
The 'Advanced Functions' button is used to access all the advanced functions of the
keyboard.
The keyboard is now able to send data received from the computer out of it's MIDI
OUT socket, to whatever device is connected.
When the 'Advanced Functions' button is pressed, the keyboard goes in to 'Edit Mode'. In
Edit mode, the keys on the keyboard are used for selecting functions and entering data.
·
You need to select the eKeys 49 USB MIDI Out as the MIDI output device in your
sequencer to use the MIDI output.
The light above the 'Advanced Functions' button indicates whether Edit mode is engaged
or not. In Edit mode, the Black keys of the Keyboard are used for selecting functions,
while the white keys are used for data entry, and channel selection.
Edit mode will finish as soon as a function is selected, or the CANCEL or ENTER keys are
pressed. This is indicated, since the light above the 'Advanced Functions' button will turn
off. Then, the keyboard can be used to play notes again.
The diagram on the following page shows what each key on the keyboard represents in
edit mode:
Download from Www.Somanuals.com. All Manuals Search And Download.
16
9
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
The Volume Slider
As with the Modulation Wheel, the volume Slider can be assigned to any of the 131 effects at
the back of this manual.
To assign the Volume Slider to an effect:
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the Black Key above D4 (named D#4), representing SLIDER ASSIGN.
Use the Numerical Data Entry keys G3 – B4 to enter the number of the effect you want to
assign to the Volume Slider.
Or
Alternatively, you can use the '+' and '-' buttons to change the value.
Advanced functions
·
·
Press the ENTER key (C5).
Move the Volume Slider upwards to increase the value of the effect.
The Octave ‘+’ And ‘-’ Keys
The Octave '+' and '-' Keys will '+1' or '-1' each time they are pressed. By default, the Oc-
tave '+' and '-' Keys control the octave shift either side of 0. This is the setting every time
you turn the keyboard on. When both lights above the two octave buttons are on, you know
the octave shift is set to 0. We have already seen the operation of these buttons for Octave
control in the getting started guide section.
If you have made an error while entering the numerical data value, you can press the CANCEL
key (C1) to exit Edit mode without changing the effect assigned to the Volume Slider.
Note that each time the keyboard is turned off, the data assigned to the Volume Slider will be
lost. Each time the keyboard is powered up, the Volume Slider will default to being assigned to
Volume(effect number 07).
However, these two '+' and '-' buttons can also be used to control one of five more MIDI
functions.
Pitchbend Sensitivity
In the diagram above you see that the first 6 black keys are labelled 'DATA = -----'. These
keys are used to select the function of the Octave '+' and '-' buttons. Some of the functions
the '+' and '-' keys can be used for can not send out a value less than 0. In this case, the
lights above the '+' and '-' buttons will remain on.
It is possible to alter the sensitivity of the Pitchbend wheel by assigning effect number 128 to
the Modulation Wheel or Volume Slider. This will allow you to alter the pitchbend range up to 1
octave up and down.
Just In Case It All Goes Wrong!
To select the function of these buttons:
The eKeys49 has been designed to make MIDI on your computer as simple as possible. How-
ever, sometimes times things can go wrong. In many cases it is not the keyboard that is at
fault, but the receiving device. To counter this, there are two useful MIDI functions:
·
·
·
Press the 'Advanced Functions' button, which will put the keyboard into Edit mode.
Press the black key that represents the function you want for the '+' and '-' keys.
Edit mode will finish as soon as you have selected the function and you will be able to
play notes again.
All Notes Off
Use this if you find there are hanging notes that you can not stop playing. To send an 'all notes
off' MIDI message:
Definition Of Advanced Functions
Octave Shift
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the Black Key above D3 (named D#3), representing ALL NOTES OFF.
Edit mode will exit, and there will no longer be any hanging notes.
Octave shift can be achieved using two methods. The first has already been described in
the 'Getting Started Guide' and involves using the octave '+' and '-' keys.
To assign the '+' and '-' keys to control the octave if they are not already:
Download from Www.Somanuals.com. All Manuals Search And Download.
10
15
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
The Modulation Wheel
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the black key above C1 (named C#1), representing DATA = OCTAVE.
Edit mode will finish as soon as C#1 has been pressed.
It is possible to assign MIDI effects to the Modulation wheel. Some useful effects are:
01 Modulation
07 Volume
10 Pan (balance)
05 Portamento
The second method will allow a quick octave change. It is useful if you are using the octave '+'
and '-' buttons for a different MIDI function and do not want to have to change this:
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the black key below B2 (named Bb2), representing OCTAVE + to increase the octave
by 1. Press it again to reduce the octave by 2 ...etc.
There are 131 effects in total. However, for these effects to have any affect on the sound, the
receiving MIDI device has to be able to read and respond to these MIDI effect messages.
Most devices will respond to volume, modulation, and pan data as a minimum.
or
·
The full list of effects is given at the back of this manual.
To assign an effect to the modulation Wheel:
Press the black key above F2 (named F#2), representing OCTAVE – to decrease the oc-
tave by 1. Press it again to decrease the OCTAVE by 2 ...etc.
or
·
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the Black Key above C4 (named C#4), representing WHEEL ASSIGN.
Use the Numerical Data Entry keys G3 – B4 to enter the number of the effect you want to
assign to the Modulation Wheel.
Press the black key above G2 (named G#2), representing OCTAVE 0 to set the Octave shift
back to 0.
When you have chosen your Octave shift press C5, representing ENTER to leave Edit mode.
Or
Transpose
Alternatively, you can use the '+' and '-' buttons to change the value.
In some cases it is useful to reduce, or increase the Pitch by a number of semitones rather than
a whole octave. For example, you may be playing a song with a singer and the singer is having
trouble hitting the top notes. In this case is a good idea to try reducing the pitch down one or
two semitones*. This is achieved using a MIDI function called Transpose.
·
·
Press the ENTER key (C5).
Move the Modulation Wheel upwards to increase the value of the effect.
If you have made an error while entering the numerical data value, you can press the CANCEL
key (C1) to exit Edit mode without changing the effect assigned to the Modulation Wheel.
Transpose works in the same way as Octave shift above, except the shift is + or – 12.
As with Octave shift, there are two ways of transposing the keyboard. You can use the Octave
'+' and '-' buttons, or the black keys F#3, G#3 and Bb3. These black keys represent
TRANSPOSE -, TRANSPOSE 0 and TRANSPOSE + respectively.
Note that each time the keyboard is turned off, the data assigned to the Modulation Wheel will
be lost. Each time the keyboard is powered up, the modulation Wheel will default to being
assigned to Modulation (effect number 01).
To assign the octave '+' and '-' buttons to transpose:
Let's give this a go:
·
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the black key above D1 (named D#1), representing DATA = TRANSPOSE.
Edit mode will finish as soon as D#1 has been pressed.
We’re going to assign effect number 10 to the modulation wheel. This means the modulation
wheel will control the Pan or Balance.
·
·
·
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press the Black Key above C4 (named C#4), representing WHEEL ASSIGN.
Press A3 to enter '1'.
Press G3 to enter '0', so you have entered '10'.
Press C5 for ENTER.
Press the '+' key and you will hear the pitch of the note you play go up.
*A semitone represents the change in pitch from one note to another. So, changing 2 semi-
tones, is the same as playing a note 2 notes higher.
Now when you move the modulation wheel up and down, you will hear the sound move from
the left to the right speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
11
Evolution eKeys49 Keyboard User Manual
Evolution eKeys49 Keyboard User Manual
Method 1 is useful if you want to cycle through different instruments, to see which sounds best
in your song. Method 2 is more useful if you want to select a specific number, as is the case
here.
Channel
MIDI data from the keyboard is sent on 1 of 16 channels. With the software we provide in this
package generally, the channel the keyboard is sending data on is not important, since the
software will receive data on all channels.
If the Octave '+' and '-' keys are selected to vary the Program number (method 1), the lights
above the buttons will not change, since it is not possible to have a Program with a negative
value. Pressing both the '+' and '-' buttons together will recall Program 0, which selects a
Grand Piano sound.
However, some MIDI devices or MIDI software this keyboard can be used with require the key-
board to send data on a specified channel. If this is the case you can change the channel the
data is sent on as follows:
The full list of instruments accessible using program changes is given in Appendix ### at the
back of this manual.
·
·
Press the 'Advanced Functions' button to get the keyboard into Edit mode.
Press one of the 16 channel keys, D1 to E3 – the one that represents the channel
you need.
Bank LSB and Bank MSB
Program Changes are the most commonly used messages to change instruments and voices.
However, the number of instruments accessible using Program changes is limited to 128.
Some devices have more than 128 voices and require a further method to access these extra
voices. Generally, these devices use Bank LSB and Bank MSB messages.
As an example if a devices specifies you need to send data on Channel 10, press the Ad-
vanced Functions button, and then key F2 to select Channel 10.
The Channel can also be assigned to the Octave '+' and '-' buttons. This will increment through
the channels. When Channel 16 is reached and '+' is pressed, Channel 1 will be selected. If
the Octave '+' and '-' keys are selected to vary the Channel, the lights above the buttons will not
change, since it is not possible to have a Channel with a negative value. Pressing both the '+'
and '-' buttons together will recall Channel 1.
For more information on Bank LSB and MSB, please see the section on 'MIDI messages Ex-
plained'.
Like Program Changes, Bank LSB and Bank MSB can be assigned to the Octave '+' and '-'
buttons. This is achieved as follows:
Program Change
·
·
·
·
Press the 'Advanced Functions' button.
Press the black key above G1 (named G#1).
Now the Octave '+' and '-' keys can be used to change the program.
Press '+' and continue to play some notes until you find the instrument you want.
Program changes are used to change the instrument or voice you are using. Let's change the
instrument to a bass sound. To do this we need to send a program change of 32, which will
select an acoustic Bass sound. There are two methods send a program change:
1. Incremental/Decremental Program change:
Bank LSB and Bank MSB can also be entered using the Quick Select method:
·
·
·
·
Press the 'Advanced Functions' button.
Press the black key above F1 (named F#1).
Now the Octave '+' and '-' keys can be used to change the program.
Press '+' and continue to play some notes until you find the instrument you want.
·
·
Press the advanced Functions button.
Press the black key above G4 (named G#4), or A$ (named A#4), representing Bank LSB or
Bank MSB respectively.
·
Press keys C4, then E3 then C5. This enters the combination '3', '2', ENTER.
2. Quick select Program Change
or
Alternatively, you can use the '+' and '-' buttons to change the value, and then press ENTER.
Now the keyboard will play a Bass sound.
·
·
·
Press the advanced Functions button.
Press the black key above F4 (named F#4),representing 'program'.
Press keys C4, then E3 then C5. This enters the combination '3', '2', ENTER.
As with Program change, if the Octave '+' and '-' keys are selected to vary the Bank LSB or
MSB number (method 1), the lights above the buttons will not change, since it is not possible to
have a Bank with a negative value. Pressing both the '+' and '-' buttons together will recall
Bank 0.
Or
Alternatively, you can use the '+' and '-' buttons to change the value, and then press ENTER.
Now the keyboard will play a Bass sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
|