Operating Instructions.
■
■
■
■
■
■
■
Aventos 3770 ZW
Aventos 3772 Z
Aventos 3781 ZW
Aventos 3970 ZW
Aventos 3972 ZP
Aventos 3981 ZW
Modus C 32
TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control – TV functions
Sound off/on (mute)
Switch on/off – in standby
Switching over to operate VCRs
TV
VCR
T-C
DVD
Switching over to operate the TV
Switching over to operate DVD players
Picture menu on/off
Timer overview
Sound menu on/off
Radio mode on/off
DISC-MENU
SP/LP
Video operation with video operating lin on/off
RADIO
000
SV
Set picture format
Select programme directly
in menu: enter numbers or letters
abc
def
mno
ghi
jkl
pqrs
EPG
tuv
AV
wxyz
PIP
Call AV selection
PIP on/off
✳✳
EPG on/off
Status display on/off
/in menu: hide menu
Call menu /in menu: back
Teletext mode on/off
Call main information
/in menu: Info texts on/off
P+
P+/P– select program up/down
Station table list on
/in menu: confirm
V–/V+ volume quieter/louder
in menu: select/set
V—
V+
OK
P—
✳
✳
red key: personal teletext pages
blue key: programme info on/off
✳
✳
yellow key: last station
green key: call up personal settings
Program –
Program +
Freeze frame off
Freeze frame on
Freeze frame on
✳
✳✳
you can assign other functions to the color keys
for the TV mode.
only in sets with Picture In Picture function
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panels
Connections on the
right side of the TV set
Audio input
(white=left,
red= right)
+
–
Video input AVS
(CVBS)
Channel up/down
/in a menu: adjust
Video input AVS
(Y/C, CVBS)
On/Off key
Standby indicator
Operating indicator
To display menu
Headphones socket
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear connections
Service
socket/
ConnectionLoewe
audio systems (L-Link)
Sockets for video
recorder, DVD,
decoder etc.
(Euro-AV)
✳
Antenna socket of the satellite tuner
in Twin-Sat: antenna socket of the 2nd satellite tuner
with Satellite Digital-Tuner DVB2S-Basic, DVB 2T/S-CI: antenna socket
with terr. digital tuner DVB2T-Basic: digital audio output
SAT
SERVICE
IN
✳
in Twin-Sat: antenna socket of the 1st satellite tuner
Antenna socket of the terrestrial digital TV tuner (DVB-T, DVB 2T/S-CI)
with Satellite Digital-Tuner DVB2 S-Basic: digital audio output
VHF/UHF
AV2/RGB
AV1
✳
Antenna output of the terrestrial Digital-TV tuner (DVB2T-CI/DVB 2T/S-CI)
connect with the antenna socket of the PIP or VHF/UHF tuner
Audio output sockets
R
OUT
L
OUT
AUDIO
VHF/UHF
Antenna socket of the antenna/cable tuner,
plug in antenna cable here,
if no PIP tuner/DVB-T tuner installed
SUBWOOFER
STAND
/if PIP tuner installed:
Plug in antenna plug of PIP tuner (distributor) here
In DVB-T without PIP tuner:
connect with the output of the DVB-T tuner DVB2T-CI/DVB 2T/S-CI
/or with the terr. dig. tuner DVB2T-Basic, connect
to the antenna system via an antenna splitter
✳
✳
Antenna socket of the PIP tuner
/insert antenna cable here
Connection for subwoofer in the stand,
Loewe active loudspeaker systems
or Home Automation
/or connect to the output of the
terr. digital TV tuner DVB2T-CI
/or with the terr. dig. tuner DVB2T-Basic, connect
to the antenna system via an antenna splitter
✳
depending on type of set or retrofittable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you,
TV equipment
Cleaning
Clean the TV set only with a damp, soft, clean
cloth (never use aggressive or abrasive cleaning
agents).
for choosing a Loewe product.
This operating manual describes the maximum
equipment.
We are very happy to have you as a customer.
✳
Functions marked by are not available in all
Loewe combines high quality in technology,
design and user friendliness. This applies equally
for TV, video and accessories.
TV sets.
The illustrated menu contents may vary depend-
ing on the TV equipment.
You can find out what equipment your TV has in
the main information – Technical spec. of TV set.
Neither the technology nor the design are an
end in themselves but serve to give our custom-
ers pure watching and listening enjoyment.
We have not allowed ourselves to be led astray
by short-lived fashion trends in the design. You
have, after all, purchased a high-quality piece of
equipment which you don’t want to get tired of
looking at tomorrow or the day after .
Setup
Please note that the feet of the TV set could
leave marks on soft wood furniture (e.g. deal,
pine, fir etc.) due to the weight and moving the
set about.
The plastic material of the feet contains soften-
ers which could in some cases etch the surfaces
of furniture.
In such cases you should place a firm underlay
about the same size as the base of the TV set
underneath it.
About the set
We have designed the TV set in such a way
that it is easy to operate with menus. If you
need information about how to operate it,
just display the info texts with the info-
button, you will soon get a grasp of the
relationships.
Please also read and observe the safety instruc-
tions on the following pages.
You will find the answers to many techni-
cal questions in the index of your TV set. If
it’s a matter of operating the TV, you can
access a function directly from the index.
This saves you from having to read through
detailed operating instructions and is the
reason why this operating manual you are
reading only explains the most important
operating steps.
Make sure no bright light or sunlight falls on the
screen and impairs the picture by reflections.
With the remote control, you can operate three
Loewe units, this TV, a Loewe video recorder and
a Loewe DVD player.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
For your own safety
For your own safety and in order to avoid
unnecessarily damaging your TV set, please
read and observe the following safety
instructions:
•
Like every piece of electronic equipment,
your TV needs air for cooling. Obstructing the
air supply to the set can cause fires. The air
vents on the back of the TV set must always
be kept free. Do not leave newspapers or
cloths lying on the TV set. The air supply is
also impaired when the TV set is placed on a
blanket or a thick pile carpet.
•
•
Magnetic fields influence the picture quality
of the TV set. Do not place loudspeakers or
other magnetic sources immediately next to
the TV set.
•
•
This TV set is designed exclusively for receiving
and reproducing audio and visual (AV) signals.
Avoid dropping metal objects, needles, paper
clips, liquids, wax or similar into the air vents
at the back of the set. This causes short
circuiting of the set and could start a fire. If
anything should get inside the set, switch it
off immediately, pull out the plug and call
the after-sales service to check it.
It is designed for the home or office and may
not be used in rooms with high humidity (e.g.
bathroom, sauna) or a high concentration of
10 cm
dust (e.g. workshops).
If the unit is used in
the open air ensure that it is protected against
moisture (rain, dripping or splashing water, or
dew). Do not place containers filled with water,
such as vases, on the TV set. High moisture and
dust concentrations produce creep currents in
the set which can lead to danger of electric
shock or fire.
5 cm
5 cm
—
+
The manufacturer’s warranty is only valid for
use of the TV set in the specified permissible
environment.
If the TV set is placed in a cabinet or on a
shelf, at least 5 cm clearance at the sides
and at least 10 cm at the top must be left to
allow air to circulate.
Stand the TV set in a place where it is not
exposed to direct sunlight or additional heat-
ing from radiators.
•
•
This set may only be connected to a power
supply with the voltage and frequency specified
on the rating plate using the enclosed power
cable. The wrong voltages can damage the set.
—
+
If the set is moved from a cold environment to
a warm room, condensation forms on all parts
of the set. Moisture produces creep currents
in the set which can cause a fire. In this case,
you should leave the set for a reasonable time
to acclimatize (when the condensation on the
screen has evaporated) before switching it on.
Do not place vases filled with water, lighted
candles etc. on the top of the TV set.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
For your own safety
•
You should never attempt to remove the rear
panel of the TV yourself. The set operates
with high voltages which could be fatal.
Leave repairs and servicing of your TV set to
authorized TV technicians.
•
Do not place the TV anywhere where it may
be exposed to vibrations because this can
lead to overloading of materials.
•
•
Do not leave the TV on unsupervised.
•
Due to the picture tube, TV sets have their
center of gravity fairly near to the front.
The TV set therefore has a tendency to tip
forward relatively easily which could cause
injury to persons.
Only stand the TV set on a level, firm base.
The set must stand on all feet. The TV should
not overhang particularly when it is placed in
a cabinet or on a shelf.
Pull out the antenna and mains plugs during
a thunderstorm. Surge voltages from lighting
strikes can damage the set both through the
antenna system and the mains.
You should also pull out the antenna and
mains plugs during long periods of absence.
—
+
•
•
The mains plug of the TV must be easily ac-
cessible so that it can be disconnected from
the mains quickly at any time.
If the TV is placed on a stand, makes sure
this is larger than the surface area of the
base of the TV.
Lay the power cable so that it cannot be
damaged. The power cable may not be
kinked or laid over sharp edges, and may not
be walked over or exposed to chemicals; the
latter applies for the entire TV set. A power
cable with defective insulation can lead to
electric shocks and is a fire risk.
When using turntables and drawer shelves,
make sure they have a sufficient load capac-
ity.
We recommend you to use only original
parts, e.g. Loewe racks and stands.
If the TV set is placed on a console with cas-
tors, move the console carefully because the
console and the TV could tip over. Consoles
with castors may considerably reduce the
stability of the sets placed on them so only
use consoles specially designed and ap-
proved for the TV.
•
When you pull out the mains plug, do not
tug the cable but hold the housing of the
plug. The cables in the mains plug could be
damaged and cause a short circuit the next
time it is plugged in.
Never allow children to handle the TV set
unsupervised.
Do not allow children to play close to the TV
set, they could knock, push or pull it from the
stand and injure someone.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Remote control
Batteries
Connection
Mains
Switching on
Press the On/Off button so that
To insert or change the batteries, press the point
marked by an embossed arrow. Push the cover of
the battery compartment down and remove it. In-
sert the batteries of the alkaline manganese type
LR 03 (AAA) with the correct polarity (+/–).
Connect the TV set to a 230V/50–60 Hertz outlet.
it snaps in.
Antennas
Initial installation
Connect your antenna or cable system to the VHF/
UHF antenna socket.
Automatic programming of the TV set is started
the first time you switch it on. Follow the menus.
First you have to select the menu language for
your set. Then you specify which antenna you
have connected to your TV and in what country
you are using it. Then you start the station
search. The TV set searches for, stores and sorts
all the stations which your antenna system re-
ceives. You then see a list of the stored stations
in which you can mark your favorites. Finally log
in your video recorders, decoders, Loewe audio
system and Home Automation with the con-
nection wizard and connect these to the TV set
according to the illustrated connection plan.
If equipped with a PIP tuner, plug the antenna plug
which comes out above the PIP antenna socket
into the antenna socket of the VHF/UHF tuner. Plug
the antenna plug of your antenna or cable system
into the PIP tuner socket.
If equipped with a DVB-T module 2 T -CI or
2 S/T-CI, connect your antenna system to the upper
socket of the DVB-T module (IN) and connect the
lower socket (OUT) to the antenna input of the
VHF/UHF tuner or if equipped with a PIP tuner, to
this socket.
If equipped with the terrestrial digital tuner 2
T-Basic a common antenna is used for digital and
analog signals, connect the terrestrial digital tuner
and the analog tuner to the antenna system via an
antenna splitter.
If equipped with one or two satellite tuners, con-
nect the Sat antennae to the SAT sockets (see fig.
page 5).
+
+
Then push the cover back on.
Note on disposal of batteries:
The original batteries do not
contain any pollutants such as
cadmium, lead and mercury.
Used batteries do not belong in
the domestic waste. They must
be taken to the appropriate col-
lection points according to the
national laws.
Pressing the OK button in the
direction of the arrow to select
the settings
OK
... confirm the settings with OK.
You then move on to the next
menu ...
OK
Setting the remote control to operate the
TV set
... press this button if you want
information about the settings.
TV
Press the TV button
You can repeat initial installation at any time,
e.g. after moving house. Call the index in the
main information (info button). Then select the
item ”Repeat initial installation”. Then start
”Initial installation” with OK.
How to operate other Loewe equipment is de-
scribed on page 20.
SAT
SERVICE
IN
VHF/UHF
AV1
AV2/RGB
R
OUT
AUDIO
OUT
L
VHF/UHF
SUBWOOFER
STAND
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily handling
About the station table
Switching on/off
Changing channels
P+
Your TV set is equipped with an eco-standby
power supply unit. The power consumption drops
to low power in standby mode.
If you want to save even more energy, switch
the set off with the On/Off switch. However,
please note that EPG data are then lost and timer
recordings programmed on the TV set will not be
carried out.
Channels up/down (only favorite
stations if these are shown in the
station table).
OK
Call the station table with OK
V—
V+
OK
Channel overview: TV
Numerical
P–
AVS
AV2
AV1
7
8
9
S–RTL
N–TV
DSF
With the numeric keys on the remote control
The set has a dynamic memory with 220/with DVB
1470 memory slots. If up to 9 stations are stored,
you only need to enter one number, up to 99 two
numbers, up to 999 three numbers and above 999
four numbers (please look in the station table to find
out how many stations have been stored).
1-digit stations
0
1
2
3
4
5
6
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
NDR
10 TM3
11 PRO7
12 RTL 2
13 WDR 3
14 BR 3
15 HR
16 MDR 3
0
...
9
Select program:
INFO
Info
Menu
End
Select and
Change programs
Favourite programs
Change sorting
MENU
OK
press OK to proceed
END
If the TV is switched on, you can
switch it off with the blue On/Off
button on the remote control. The
red standby LED on the set lights
up. If the green LED also lights,
a timer recording is in progress,
EPG data is being acquired or ra-
dio mode without screen display
is active.
From standby it is best to switch
back on with the blue On/Off
button or with a numeric key
(station 0-9). The green operating
LED then lights up.
Mark station (if possible the
marked station is shown in the
OK
✳
Keep the button 0 – 9 pressed
for one second, the channel then
changes immediately.
or press the button 0 – 9 briefly, the
PIP picture)
or
AV
Mark with numeric keys
wxyz
channel then changes after 2 sec-
pqrs
Call the marked station
onds (changes immediately if only 9
stations are stored).
2-digit stations
OK
long
Sort alphabetically/numerically
(blue button)
Keep the second numeric key
pressed for one second, the channel
pqrs
Channel overview: TV
Alphabetical
a
ARD
EUROSPRT
then changes immediately.
short long
BR-ALPHA
BR3
HOT
HR
When you switch on the TV with
OK, you see the station table and
or press both numeric keys briefly,
the channel then changes after 2
seconds (immediately when up to
99 stations are stored).
CNN INT.
CAM
KIKA
OK
MDR 3
DSF
DVD
can choose a station.
N–TV
✳ABCDEFGHIJKLMNOPQRSTUVWXYZ
RADIO
INFO
Switch on in the radio mode.
Change programs
Favourite programs
Change sorting
Info
Menu
End
Select and
press OK to proceed
MENU
OK
3-digit stations
END
Keep the third numeric key pressed
for one second, the channel then
changes immediately.
pqrs
None of the indicators lights up
when you switch off the TV set
with the On/Off button on the
set.
Display favorite stations only
(yellow button)
short short long
or press the three numeric keys
briefly, the channel then changes
after 2 seconds (immediately when
up to 999 stations are stored).
4-digit stations
Press the four numeric keys briefly,
the channel then changes immedi-
ately.
Call Audio/Video programs – AV selection
If the TV is switched off like this
you can switch it back on with
the On/Off button.
for playing AV equipment (see
also page 19).
AV
tuv
AV Selection VIDEO AV1 AV2 AVS
all short
Select AV socket or VIDEO for
VCR transmitter.
OK
Depending on how many stations have been stored,
you can place one or more zeros in front of the
number and select for example station 7 = 07 or
007 or 0007.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily handling
General menu operation
Adjusting the sound
Adjusting the picture
With the TV and picture menus, we show you how
to navigate within the menus. Which buttons you
can use for operation is shown at the bottom of
the appropriate menu.
Set the volume
Call Picture menu,
P+
or the TV menu
with MENU ...
TV menu
MENU
OK
Standard settings
Picture
Sound
Set the volume
V–
V+
OK
P—
other ...
Volume
36
zap2text
Call the TV menu
mark ”Picture”
MENU
TV menu
Connections
Settings
Standard settings
Picture
Sound
zap2text
Connections
Settings
with ”others ...” you can select
and ...
Mark
(white field)
OK
OK
OK
... and call with OK
OK
Listening mode Stereo Panorama Dolby Virtual
Loudness
Sound adjust
Volume
Call the menu
with OK
OK
Picture
Contrast
Colour
32
mark picture func-
tion
... set other sound settings.
INFO Info
OK
OK
or
Brightness
Picture format
Sharpness
Tint
OK
MENU
Back
END
End
OK
call ꢀ
Mute
Sound off;
Sound on: press button again
or adjust volume
Set/
other ...
Grey menu items cannot be
Picture
select
selected
Set
Contrast
Colour
Brightness
32
Picture settings: contrast, colour, brightness, picture
format, focus, colour tone, picture adjustment, noise
reduction (DNC) and automatic picture size adapta-
Sound off
Sound on
(setting value
and bar)
OK
Picture format
Sharpness
Tint
Other sound settings:
✳
other ...
tion (AMD) .
Call Sound menu
or
Mark other
OK
INFO
Info
Back
End
menu items
Operation on the TV set
Changing channels on the TV set
MENU
END
call the TV menu
with MENU ...
MENU
OK
TV menu
Standard settings
Picture
Sound
Channel up +
Picture
other ...
mark ”Sound”
+
Select
(frame)
Picture adjustment
zap2text
Connections
Settings
OK
Channel down –
-
DNC
AMD
off on
… and call with
OK
OK
Volume, contrast and color
Press the function
button until the
desired function is
marked
mark sound
function
OK
INFO
Show/hide
info texts
INFO Info
MENU
Back
End
Sound
Sound via
END
Listening mode Stereo Panorama Dolby Virtual
Direct control on TV
Sound adjust
Treble
Bass
Loudness
other ...
Picture
other ...
i
DNC (Digital Noise Control)
With DNC you can eliminate or reduce picture
interference, e.g. due to poor reception.
Volume
Contrast
Colour
16
Set/
select
OK
Picture adjustment
+ more volume,
contrast or color
DNC
AMD
+
-
Station –/+
Service
Sound settings: Sound via the loudspeakers of the
TV set or another system. Sound adjust, treble,
bass, loudness and balance. Sound select for
loudspeakers and headphones, AV output sound.
Volume of the headphones, automatic volume and
max. volume.
Back to the previous menu level
Hide all menus
MENU
END
Mark
Change
- less volume, con-
trast or color
–
+
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
The explanation of the remote control shows
the function of every button in different modes of
operation of the TV set and the remote control.
Some settings in the TV menu:
Child lock
Use the child lock if you want to prevent your
children watching after a certain time, once or
daily, all or certain programs.
TV mode
In initial installation and daily operation, the TV
set is in TV mode. This is also the case when none
of the other modes of operation such as EPG,
Teletext, PIP, Video or Radio is selected.
The index answers many questions regarding
all aspects of the TV. If it is a question about the
operation, you have direct access to the operating
function from the index.
On-screen displays
Every one of these modes of operation has a
menu which you can call with the MENU-button
and with some color button assignments.
You can define duration and position of the
displays, the content of the program and status
display and activate or deactivate zap2text as a
display.
Loewe TV sets are supplied in different models
with different equipment. You can find out what
equipment your TV has under the menu item
”Technical spec. of the TV set”.
When you have made all the settings and connec-
tions, you can switch over to ”Simplified control”
using ”Select Mode”. Then the ”Settings” and
”Connections” can no longer be launched in all
modes of operation menus. Switch ”Simplified
control” back off when you want to make set-
tings.
Function of the color buttons in TV mode
You can assign the functions of the four color
buttons yourself. The following functions are set
at the factory:
Timer functions
You can have your TV switch on and off at specific
times or have yourself reminded by a signal tone.
Time and date
red: list or call personal teletext
pages
When you receive teletext, the TV records the
right date and time settings. The time serves as
information for timer recordings, timer functions
and EPG. If you do not receive teletext you should
set the date and time and not switch the TV off
with the mains button as the settings will then
be lost.
green: call up personal settings
yellow: call last viewed station
blue: call station info
Call the TV menu
Launch the TV menu
MENU
TV menu
Language
Standard settings
Picture
Sound
You can assign other functions to the buttons in
the TV menu ”Settings” – ”Function keys”.
Status display
If ”your” menu language is not set, you have to
select the ”Language” menu in a language you
cannot understand:
Press the MENU-button (TV menu), mark the last
menu item (settings), press the OK button and
mark the last menu item (Language) under ”other
...” and press the OK button.
zap2text
Connections
Settings
END
Show/hide status
Clock
20:15
zap2text
1 ARD
Stereo
Some stations use this service. If teletext pages
are referred to during a program, the TV set saves
and/or displays this page number. You call the
teletext page with the TEXT button from the
display during the program or from this menu.
Main information
Now select the right language and confirm with
OK.
Call main information
Main information
Autom. channel search
Connections
Explanation of the remote control
Standard values
You can save the setting for picture and sound
you have made in this menu and launch them
again later.
Index
Technical spec. of TV set
Select control level
Connections
Select and call up
with OK
INFO Info
You will find information about this in the chapter
”Logging in and connecting AV equipment” on
page 18.
MENU
OK
Back
END
End
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
✳
Station scan
Setting ”iPIP”
Switch on PIP, call the PIP menu with the
MENU- button.
Picture in Picture (PIP)
The frame around the PIP picture
must be green. If it is not, press
the green button.
Start the station scan with the
blue button. The PIP frame turns
blue.
Standard PIP functions:
In standard PIP, a PIP picture is displayed in the
current TV picture. The frame round the PIP picture
is initially green in standard PIP.
Mark ”Functio-
nality”
OK
PIP menu
Position
Functionality iPIP Standard-PIP
PIP
Show/hide PIP picture
The programs now change automatically.
Stop the program scan with the blue button. The
PIP frame turns green again.
PIP picture as still frame
The frame around the PIP picture
must be green. If it is not, press
the green button.
OK
Select ”iPIP”
Hide menu
INFO Info
MENU
Back
End
END
Changing PIP picture/TV picture
The frame around the PIP picture
must be green. If it is not, press
the green button.
END
Press the red button to freeze the
PIP picture.
Press again – moving picture.
iPIP function:
In iPIP the TV picture currently displayed
becomes the PIP picture. Select another program
for the TV picture and keep your eye on the PIP
picture. In this way you can temporarily ”ban”
commercials or parts of programs to the PIP
picture. In iPIP, the frame round the PIP picture
is orange.
Change the pictures with the yel-
low button.
Changing the station of the PIP picture
The frame around the PIP picture
must be green. If not, press the
Position of the PIP picture
green button.
P+
Call the PIP menu with the
MENU-button.
MENU
Then select the station as normal.
V—
V+
OK
P–
PIP
PIP picture on/off
OK
Mark ”Position”
3
WDR3
The PIP picture becomes a TV picture again
when you switch off PIP.
Select the symbols for the position
OK
PIP menu
Position
Functionality
Changing the station of the TV picture
The frame around the PIP picture
must be white. If it is not, press
INFO
Info
MENU Back
END
End
P+
the green button.
V—
V+
Then select the station as normal.
OK
END
Hide the PIP menu
P–
2
ZDF
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Programming a VCR recording
accordingly. With the g h buttons, you mark a
station you want to watch (currently running),
memorize or record.
EPG mode
You prepare the station marked with the ꢂꢃbut-
tons for recording by pressing the red button.
Calling detailed information
If detailed information about the selected station
is available, you will see the TEXT button displayed
additionally. You can call the detailed information
with this button.
EPG is the electronic program guide for TV
programs. With this system, you can easily find
the stations that interest you (sorted according to
time, day, topics and programs). You can memorize
stations and station recordings.
EPG
Current: Fri 03.08./20:08
Favorite programs all ARD ...
14:03 ARD
20:45 MDR
14:03 ARD
WunschBox
Das deutsche Schlagermagazin
WunschBox
-15:00
A wizard is activated the first time you use EPG
(not with DVB) which guides you through the
necessary settings. Then run the data acquisition
(see next page).
Select and
memorize
with OK
Record
INFO
MENU
END
Info
Menu
End
Time (Sat 4.8./14:03)
Topics (Music)
Programs (fav.)
OK
Other functions in the EPG menu:
Call the EPG menu with the MENU key.
List of memorized stations
You will find the stations you have memorized in a
list, also DVB radio stations.
The frame turns blue when you press the blue but-
ton. The blue frame signifies station selection.
Use the arrow buttons ꢁꢀto choose between
your favourite stations, all stations or the station
just set. You can select another individual station
by moving to ”...” with ꢀ, marking a station in
the list and storing it with OK.
Using the EPG
EPG
Switch EPG on/off
Switch on TV at memo
EPG
Current: Fri 03.08./20:08
now soon 21:00 22:00 23:00 00:00 01:00 02:00 03:00 04:00 05:00 ...
You can have the TV switched on automatically
from standby at the time of the memorized station.
If you are not in at the time, a safety prompt makes
sure the TV switches off again after 5 minutes.
Indicate/start memorized station
If the TV is already on when the memorized station
starts you can have the start of the station indi-
cated or the TV switched over immediately.
Short info lines
19:15 VOX
19:30 ZDF
19:30 BR3
Zurück in die Vergangenheit
WISO
Immer weiter, immer höher und dann?
19:40 SAT1 echt wahr!
19:40 RTL
19:50 MDR
20:00 ARD
20:00 HR3
20:00 NDR
Gute Zeiten, schlechte Zeiten
–20:15
Mach dich ran
Tagesschau
Tagesschau
Tagesschau
The respective current settings are shown next to
the operating notes for the color buttons.
20:00 WDR Tagesschau
Record
INFO
Info
Select
and press
TEXT Detail
MENU
Day (Fri 3.8./now)
Topics (all topics)
Programmes (all)
OK
Menu
End
Direct input of time
OK to view
END
You can also enter the time directly with the
numeric keys of the keypad. After entering the first
digit, the time is displayed first next to the symbol
of the green button by asterisks and is then
replaced by the entered numbers, e.g. 2100.
If the entered time has already passed, its entry is
used for the following day.
Watch a station or watch a memorized station
or memorize a station
You memorize the station marked with the
ꢂꢃbuttons by pressing the OK-button. The sym-
bol + is placed in front of the title of the station.
The TV switches over to this station when it starts.
The first line is framed initially in green.
The green frame stands for time and date, with
the green button you switch between time and
day or, if the frame has a different color, back to
the green frame. With the arrow buttons ꢁꢀ
you select: now, later, the time or day for start-
ing stations. The list of stations below is updated
accordingly. With the buttons ꢂꢃyou mark a sta-
tion you want to watch (now running), memorize
or record.
Short infos are broadcast for many programs. Set
how many lines this information should have or
switch the short info lines off.
EPG entry
If you want to start EPG operation, you can retain
your last settings for topic and program selection
or start with all topics and all programs.
EPG
Current: Fri 03.08./20:08
person. topics all - ... Hobby Sport Child Knowledge Music ...
12:00 NDR
14:03 ARD
20:45 MDR
21:00 NDR
01:25 NDR
12:00 NDR
14:03 ARD
WunschBox
WunschBox
-13:00
Das deutsche Schlagermagazin
Bi uns to Hus
Bi uns to Hus
WunschBox
WunschBox
Select
and view
with OK
INFO
MENU
END
Record
Info
Menu
End
Day (Sat 3.8./12:00)
Topics (music)
Programs (all)
OK
The frame turns yellow when you press the yel-
low button. The yellow frame means you can
select topics. With the arrow buttons ꢁꢀ you
choose between personal topics, all topics and the
individual main topics such as Film, News, Show,
Music etc. The list of stations below is updated
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
EPG settings
Selecting stations for EPG
Select the stations here for which information is
to be collected.
If, for example, you cannot receive any EPG pro-
viders and no DVB is installed in the TV set, you
should switch off the data acquisition.
If you want to change the provider or want to
have other programs evaluated, you can do this
in the EPG menu.
Program selection: 3SAT
Performing data acquisition
0
VIDEO
9+S–RTL
10+MDR 3
11 DSF
E
18 KIKA
1+ARD
2+ZDF
3+SAT.1
4+RTL
E
E
E
E
19 PHOENIX
20 EUROSPRT
21 KABEL 1
22 MTV
E
The data must be collected first after these set-
tings or every time the TV is switched off. To do
this, select the program which you have defined
as a provider and leave it switched on for about
one hour or switch the TV set to standby mode.
The green LED lights up in addition to the red LED
after about two minutes. Data acquisition takes
about one hour, in sets with a DVB module a
little longer. The data are automatically collected
between 2 and 5 in the morning when the TV is
switched off to standby.
Provider search
12 TM3
13+PRO7
14+RTL 2
15+WDR 3
16+BR 3
17+HR 3
E
E
E
E
E
5
VOX
23 CNN INT.
24 HOT
25 TV 5
26 VIVA
6+S–RTL
7+N–TV
E
EPG on/off
EPG
8
DSF
+ Mark
Mark all
Mark only
INFO
MENU
END
Info
Back
End
Select programs
and mark
with OK
OK
MENU
Call EPG menu
EPG menu
List of memorized stations
Select provider/program
Favorite programs
Select personal topics
Timer
Stations marked by + are favorite stations. The
provider supplies information for stations marked
by E (terrestrial, cable and analog satellites) and
D (digital), these are already marked (blue letters).
Switch on TV when marked
other ...
yes
INFO
MENU
END
Info
Back
End
OK
Mark the station/Remove the
marking
OK
OK
Defining personal topics
Mark ”Provider/Select station”
You will find the programs that interest you faster
when you define your personal topics. Mark
”Select personal topics” in the EPG menu and
put together your list of personal topics.
red: Only mark favorite stations
green: Mark all stations
OK
Call
Select provider
3SAT
PRO7
RTL2
TV 5
Select personal topics
yellow: Only mark this station
Film
News
General music
Jazz
TRT 1
Show
Rock/Pop
Hobby
Sport
Child
Knowledge
Music
Culture
Classical
Folk/Easy listening
Musicals/Opera
Other
Back to the EPG menu
MENU
Provider search
Change provider list MENU
Program selection
INFO
Info
Select provider
and confirm
with OK
Back
OK
END
End
Switching data acquisition on/off
INFO
MENU
END
Select topics
and mark with OK
Info
Back
End
mark all
Mark only
OK
Start provider search (green
button). This may take some
time.
Mark ”Data acquisition” in the
OK
EPG menu under ”other”
Radio mode
You can switch the radio mode on and off with
the RADIO button. If at least one satellite tuner
and possibly a DVB module are installed in your
TV set, you will be able to receive radio stations.
If none of these additional modules is installed,
you can only select the audio inputs and play
back through these with the station table or the
ꢂꢃbuttons.
OK
Mark the provider
Save the provider
OK
Select data acquisition off/on
EPG menu
other ...
Memorized stations
Data acquisition
Short info lines
EPG entry
first report
off on
none
OK
last setting
This is followed by a station search and a list
INFO Info
MENU
Back
End
of TV stations is displayed which transmit data.
Move on to the provider selection with the
OK- button. If the stations offered are what you
want, move on to the station selection with the
blue button.
END
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Other functions for selecting pages
Displaying teletext pages
Teletext mode
Stop self-turning pages (HOLD)
AV
Mark a specified page number on
the page (Page Catching)
Teletext transmits information such as News,
Weather, Sport, Program Previews and Subtitles.
OK
zoom: top half – bottom half
– normal size
wxyz
werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Teletext on/off
TEXT
1O.3O
12.OO
Ein Zwilling zu viel . . . . . . . 314
Tagesschau um zwölf
tagesschau. . . . 11O
Wetter. . . . . . . . . 17O
Sport. . . . . 2OO/6OO TXT-Quiz. . . . . . . 555
TV Guide. . 3OO/4OO
Kultur. . . . . . . . . 5OO
1OO 1OO ARD-Text
ARD-Text
O1.O7.O1 1O:3O:42
Teletext im Ersten
PIP
TV picture on/off (Split text)
Lotto/Toto. . . . . 666
Wirtschaft. . . . . . 7OO
Impressum. . . . . .1O7
tagesschau
1OO 1OO ARD-Text
O1.O7.O1 1O:3O:42
Index. . . . . . . . . . 1O1
Letzte Meldung: Libyscher Botschafter
in London schließt Entschädigung für
Lockerbie-Opfer nicht mehr aus
Fußball: Rolf Hüssmann soll neuer
Sportdirektor beim VfB Stuttgart
ARD-Text
Teletext im Ersten
Inhalt
–
+
Letzte Meldung: Libyscher Botschafter
in London schließt Entschädigung für
Lockerbie-Opfer nicht mehr aus
Fußball: Rolf Hüssmann soll neuer
Sportdirektor beim VfB Stuttgart
Page selection
OK view
werden
1O.3O
12.OO
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
223
314
werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Ein Zwilling zu viel
Tagesschau um zwölf
1O.3O
12.OO
Ein Zwilling zu viel . . . . . . . 314
Tagesschau um zwölf
OK
Call
tagesschau.
.
.
.
.
.
.
11O
17O
TV Guide.
Kultur.
.
.
.
3OO/4OO
.
.
Wetter.
Sport.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5OO
555
.
2OO/6OO TXT-Quiz.
.
Lotto/Toto.
Index.
.
.
.
.
.
.
.
.
666
1O1
Inhalt
Wirtschaft.
Impressum.
tagesschau
.
.
.
.
.
.
.
.
.
7OO
.1O7
tagesschau. . . . 11O
Wetter. . . . . . . . . 17O
TV Guide. . 3OO/4OO
Kultur. . . . . . . . . 5OO
.
.
.
.
.
–
+
Page selection
Scrolling in stored sub-pages.
In the bottom line you will see
which sub-pages you can already
call.
Sport. . . . . 2OO/6OO TXT-Quiz. . . . . . . 555
Lotto/Toto. . . . . 666
Wirtschaft. . . . . . 7OO
Impressum. . . . . .1O7
tagesschau
Index. . . . . . . . . . 1O1
Programming timer recordings
OK
Inhalt
–
+
Page selection
Call the program pages of the current station in
teletext mode with the Record button •. Select the
station you want to record with ꢂꢃ and confirm
with the OK button. Under ”Timer data” select the
VCR or DVD and whether you want to record once
or record a series. Confirm with OK.
Many stations use the TOP operating system,
some use FLOF. Your TV supports both these
systems. The pages are divided into general topics
and topics. After switching on the teletext, up to
390 pages are stored for fast access.
Selecting pages with the colored buttons
The colored bars (in TOP) or the colored writing (in
FLOF) show you which colored buttons to use to
scroll to general topics and topics.
Geld
Optionen 2
1O
–
+
1
2
3
4
5
6
7
8
9
Call contents page 100
1OO 1OO ARD-Text
ARD-Text
O1.O7.O1 1O:3O:42
Teletext im Ersten
Teletext menu
Display teletext menu
MENU
The TOP table is a general list of teletext. You can
only call the table on stations which use the TOP
operating system.
Here you will find functions such
as ”New message”, ”Reveal”
Menu
News flash
Show
Station –/+
Sub-page
hidden information, switch to
other stations (if another tuner is
available), enter 4-digit sub-page
number directly and program
Lotto/Toto. . . . . 666
Index. . . . . . . . . . 1O1
Wirtschaft. . . . . . 7OO
Impressum. . . . . .1O7
tagesschau
Call the TOP
table
Inhalt
–
+
OK
Page selection
Recording
Timer
red: back to previously viewed
page (not with FLOF)
Table of Pages (TOP)
TOP table
Übersicht
tagesschau
Wetter
Wetter
Vorhersage
Städte
Regional
Reisen
int. Städte
Biowetter
Settings
video timer recordings via teletext.
Mark a general
topic
OK
Sport 1
TV Guide
In the settings you will find menus
ARD heute
ARD morgen
FS-Sendungen
TV Guide 2
Kultur
green: forward to next page (not
with FLOF)
INFO Info
to define the preview pages, sub-
title pages and personal teletext
pages.
MENUBack
OK
Gesellschaft
weitere . . .
END
End
Select the Topics
column
yellow: to the next topic (only in
TOP and FLOF)
Select page and
press OK
to view
OK
OK
MENU
Back
End
OK
END
Mark
blue: to the next topic (only in
TOP and FLOF)
a topic
OK
Display page
pqrs
a
Enter the page number directly
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Pause (PAUSE)
You can change and delete timer data or program
new recordings in the ”Timer” menu.
❚❚
Video mode
You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR’s must be connected to the
Euro AV sockets (Scart) and logged in under the
”Connections” menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the control
bar. You also need Digital Link for timer recordings
of satellite programs controlled by the TV set.
You can display up to two control bars but they
are only displayed by logged in VCR’s and DVD
players.
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
The ”Record” menu gives you the option for timer
programming by EPG, teletext or manually.
In the ”Connections” menu you can log other
AV equipment on or off. In the ”Digital Link Plus
transfer” menu the station data of the TV set (not
satellite stations) are transmitted to the Digital
Link Plus VCR.
●
OK
Perform selected function.
In the Settings menu you can enter the record lead
and follow on time and serial recording tolerance.
When you start a recording, the program you
have just selected is recorded. You cannot switch
over to another channel, it is locked. You can only
switch over when the recording has finished.
Exceptions:
1. You have installed several tuners (not PIP tun-
ers) in the TV set, then you can watch another
channel with the second tuner.
2. You can also watch the signal via an AV con-
nection (e.g. DVD player or a second VCR).
3. In a VCR with Digital Link Plus the VCR tuner
is used for the recording (not for satellite
programs).
Digital Link Plus VCRs have the possibility for
transferring the station data from the TV set to
the VCR via the Euro-AV cable (not for satellite sta-
tions). Every time you change the station memory
of the TV, you are asked whether you want to
make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
Loewe VCRs also have Digital Link, a system for
controlling Loewe VCRs via the Euro-AV cable. If
the Loewe VCR only has Digital Link, the TV tuner
is used for recording. If you have installed your
Loewe VCR in a concealed place, you can operate
the Loewe VCR with the remote control. Operation
with the control bar also works with Digital Link.
Show/hide video
control bar
DVD
VCR
STOP
STOP
■
■
❚❚
❚❚
●
AUX
INFO
Info
MENU
END
Menu
End
OK
Select the video control bar if e.g.
several VCR’s or a DVD player
and a VCR are connected.
OK
OK
Video menu
Show the Video menu
Video menu
MENU
Select function
Timer
Recording
Connections
Settings
Switch VCR/DVD on/off
Digital Link must be switched on on the video
recorder.
Select video input (Euro-AV
socket) for the VCR
AUX
INFO
Info
Back
End
MENU
OK
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
END
Rewind (only for VCR) or Scan in
rewind
The Video menu provides you with the following
options:
Stop (STOP)
■
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Manual adjustment
Logging in equipment
You have already logged in and connected all con-
Search for and store the VCR station (if there
is no Euro AV cable)
Search for
channel (blue
button)
Range
UHF
Channel
E37 (E21...E69)
Frequency 599.25 MHz
Name
E36
nected devices (video recorders, camcorders/digital Switch on the test station on the VCR or insert a
camera, DVD player, DVD recorder, Loewe audio recorded tape and start playback.
system, Pay-TV decoders, Loewe home automation, Then call program 0 on the TV set (set ex-factory
door intercom) with the connection wizard when
you put it into operation for the first time. If you
want to connect further or different devices, you
have to call the connection wizard in the TV menu
– ”Connections”.
TV stand.
Col. st.
B/G
Autom.
When the station is found:
0-9:Entry
Search
Store
INFO
MENU
END
Info
Back
End
Store (red
button)
to channel 36). Select the first menu item (VCR)
in the AV selection list.
To prevent ”normal” TV stations being found in
the search, pull out the antenna plug from the
antenna input of the VCR temporarily (the cable
to the antenna system).
A list of the stored stations is displayed
Store
0
1
2
3
4
5
6
7
8
VIDEO
ARD
9
S–RTL
18 KIKA
10 N–TV
11 DSF
19 PHOENIX
20 EUROSPRT
21 KABEL 1
22 MTV
ZDF
SAT.1
RTL
12 TM3
Connecting video/DVD recorders
13 PRO7
14 RTL 2
15 WDR 3
16 BR 3
17 HR 3
Call the TV
menu
VOX
23 CNN INT.
24 HOT
25 TV 5
26 VIVA
In addition to the connection via the Euro-AV
socket, you also have to connect the antenna (only
for antenna or cable systems) through the video/
DVD recorder to the TV set. The antenna signal is
then available both to the tuner in the VCR and the
TV tuner.
If a DVB-T module is installed, connect the VCR
to the IN socket of the DVB-T module using the
antenna cable, if a DVBT 2 Basic tuner is installed
via an antenna splitter, also connect the terrestrial
tuner.
S–RTL
N–TV
DSF
MENU
TV menu
INFO
Info
Standard settings
Picture
Sound
MENU
Back
End
Insert station
Overwrite station
END
Mark ”Settings”
OK
Overwrite program (program 0
marked)
zap2text
Connections
Settings
Call
OK
END
Hide menus
Settings
Stations
AV settings
Plug the antenna plug back into the VCR.
If you now get interference because a TV station
is transmitting on the same channel as the VCR
station, you have to change the transmitting
station on the VCR (see operating instructions of
the VCR) and search for the VCR station on the
TV again.
OK
Mark ”Stations”
Call
Child lock
On-screen displays
Timer functions
Time and date
other ...
OK
Stations
Automatic search
Manual adjustment
Sort
Mark ”Manual
setting”
OK
OK
OK
OK
Delete
Enter/change name
Preferred stations
Call
Manual adjustment
Range
Channel
VHF UHF Cable
E36
SAT
SERVICE
IN
Frequency 591.25 MHz
Mark ”Range”
and
Select ”UHF”
VHF/UHF
Name
VIDEO
AV1
AV2/RGB
R
OUT
L
OUT
AUDIO
TV stand.
Col. st.
B/G
VHF/UHF
Autom.
SUBWOOFER
STAND
INFO
Info
Back
MENU
Search
Manual adjustment
Mark ”Channel”
Range
Channel
UHF
E30 (E21...E69)
Frequency 543.25 MHz
ENTREE
ANTENNE
EURO AV2
DECODER
Name
E30
AUDIO
AERIAL
SORTIE
G
OUT
L
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
TV stand.
Col. st.
B/G
D
R
Autom.
RF OUT
Enter channel
30
dAV
0-9:Entry
Search
Store
INFO
MENU
END
Info
Back
End
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Video playback
Calling an AV program in the AV selection list
There are several ways to see the picture and hear
the sound of the VCR, DVD player or camcorder
on your TV:
1. Use the Euro-AV sockets on the TV and VCR.
This is the best way to get a good picture
and sound quality. For camcorders and digital
cameras it is best to use the front sockets AVS.
If you are playing back from a VCR with Dig-
ital Link Plus, the VCR picture is shown on the
current station slot.
AV
Call AV selection list
AV Selection VIDEO AV1 AV2 AVS
Select AV socket or VIDEO for VCR
transmitter.
OK
Now you will see the playback from the connected
AV unit.
If you are playing back from a standard VCR,
DVD player, camcorder or digital camera,
select the AV socket to which the video signal
is connected in the AV selection list
Calling an AV in the station table
Call the station table
OK
(button 0 AV) or the station table.
Video recorders emit a switching voltage dur-
ing playback which the TV set can decode (can
be activated in the connection wizard or set
Settings – AV Settings – Allow switching volt-
age to ”Yes” in the TV menu). Then the VCR
picture is shown on the current station slot as
in Digital Link Plus VCR’s.
Channel overview: TV
Numerical
AVS
AV2
AV1
7
8
9
S–RTL
N–TV
DSF
0
1
2
3
4
5
6
VIDEO
ARD
ZDF
10 TM3
11 PRO7
12 RTL 2
13 WDR 3
14 BR 3
15 HR
SAT.1
RTL
VOX
NDR
16 MDR 3
0
...
9
Select program:
INFO
Info
Menu
Select and
Change programs
Favourite programs
Change sorting
MENU
OK
press OK to proceed
END
End
2. You can also control logged-in Loewe VCRs
and DVD players with the video menu bar. See
page 17 for more details.
3. Use the antenna connection between the VCR
and the TV. The sound is only transmitted in
mono. Select the first menu item, e.g. VIDEO,
in the AV selection.
In the numeric sorting you will always find the
AV sockets at the top of the list without station
numbers.
OK
Mark the AV socket
Call the marked AV socket
OK
Now you will see the playback from the connected
AV unit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Operating Loewe video recorders and
Loewe DVD players directly
Select the device to be operated:
In DVD mode the following DVD players can be
operated: Xemix 6122DO, 8122DA und 6222PS.
for VCR:
You can switch over the remote control of the TV
set to operate Loewe video recorders and Loewe
DVD players. These devices can be operated
directly or, in the case of equipment installed in
a concealed place, by the TV set. In this case the
Digital Link function of the VCR and of the DVD
player must be switched on.
press VCR button, the lamp above
lights for about 5 secs.
VCR
In VCR mode the following VCRs can be operated:
ViewVision 8106H, 8136H, 8176H, 6306H, 6336H,
6376H, 6396H, 4306H, 4376H, 2102M, 2302M,
4206, 4236, 4276.
press the the DVD button, the
lamp lights up for about 5 secs.
DVD
TV
Switch back to TV operation: Press
the TV button.
For other Loewe equipment than that listed,
please use the original remote control or the
video bar.
When operating in the VCR or DVD mode, the lamp
above the VCR or DVD button lights.
Functions for Loewe video recorders
Functions for Loewe DVD players
Switch DVD player
on/off – in standby
Sound off/on (mute)
Operating VCRs
Switch recorder
Sound off/on (mute)
Operating VCRs
on/off – in standby
Operating DVD players
TV
SV
VCR
T-C
DVD
Operating the TV set
TV
SV
VCR
T-C
DVD
Operating the TV set
Operating DVD players
Select picture and sound sourc
Menu bar on,
select chapter active
Menu bar on,
Repeat active
Select sound
/station language selection
Counter reset
Display/close Timer list
Display/close
ShowView timer Menu
Set marker
Menu bar on,
select camera position active
DISC-MENU
SP/LP
DISC-MENU
SP/LP
RADIO
000
RADIO
000
Menu bar on, Zoom active
Switch to Long Play
User interface of
loaded DVD on
Select station directly
/in menu: enter digits
Select Chapter;
in menu: enter digits
/Standard Play
abc
def
abc
def
ghi
jkl
mno
ghi
jkl
mno
pqrs
EPG
tuv
AV
pqrs
EPG
tuv
AV
wxyz
PIP
wxyz
PIP
Set picture format (TV)
Set picture format (TV)
Call AV selection (TV)
Call up VCR Menu
Call AV selection (TV)
DVD menu on;
in menu: close menu
Status display
/in menu: close menu
Status display on;
in menu: close menu
User interface of
loaded DVD on
Status display
Menu bar on, previous
function active;
in menu: info on/off
P+/P– select program up/down
P+
P+
Reverse play
/in menu: select/set
V–/V+ volume quieter/louder
Slow motion forwards
/in menu: select/set
V–/V+ volume
quieter/louder
V—
V+
V—
V+
OK
OK
ꢃ/ꢂmanual tracking
/in menu: select position
in menu: select
Title/Chapter Table;
in menu: cofirm the menu
selection
Call up station list
/in menu: call up/confirm
P—
P—
Fast forward
Next chapter
Rewind
Beginning of chapter or
previous chapter
/search back
/search forwards
/search forward
/search backwards
Start playback
Playback
Start recording
Pause (still frame)
/frame-by-frame advance
Pause
Stop tape
Stop
/single frame, slow motion
20
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do when ...
Problem
Possible cause
Remedy
Various menu items cannot be called (shown
in gray) or the menus for the EPG and teletext
modes of operation cannot be called
”Simplified control” activated in main information Deactivate ”Simplified control” in the main
information. Press the INFO-button, select ”Select
control level” and call with OK. Set the ”Simplified
control” to ”no”.
Timer recording, Change timer and Clear timer
are not shown in the Video menu
No video recorder logged in
Log in VCR in the TV menu – Connections.
”Connections” cannot be called in the Video
menu (shown in gray)
a) A timer recording is currently in progress
a) Wait until the timer recording has ended or
clear the timer.
b) You are recording from the TV set with the
video bar
b) Wait until you stop recording.
The ”Stations” item in the TV menu and the
”Automatic station search” item in the main
information cannot be called
The child lock is activated. If these menus were
accessible, children could still set the programs.
Deactivate program-related child lock: Switch off
child lock or enter PIN in the TV menu - Settings.
Control of the Loewe VCR with the video control
bar and the timer does not work or does not
work properly
a) The VCR’s Digital Link function is not activated a) Activate Digital Link in the VCR (see operating
or not possible
instructions of the VCR)
b) Connect the Euro-AV cable
c) Log in the VCR
b) Euro-AV cable not connected
c) Video recorder not logged in
General problems with connecting external
devices through an AV input
a) The device is not logged in in the ”Connec-
tions” menu or is connected differently to
shown in the connection diagram
a) Compare the connection diagram with the
actual installation in the ”Main information”
under ”Connections” and connect as shown if
necessary.
b) The AV norm is set incorrectly
c) The AV signal is set incorrectly
b) Set the correct norm.
c) Set the correct AV signal.
If ”Automatic” is set for AV norm or AV signal,
this can lead to wrong detection in the case of
non-standardized signals. In this case the norm
and signal must be set according to the operating
instructions of the external device.
Set the horizontal position:
Picture shifted horizontally
The TV set is in the Southern hemisphere (e.g.
Australia, South Africa)
1. Call the main information with INFO
2. Call Index – Set picture – Horizontal displace-
ment
3. Set horizontal picture position.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do when ...
Problem
Possible cause
Remedy
Connection of a decoder does not work or does
not work properly
a) The signal is not decoded because the correct
decoder programs have not been selected in
the TV menu - Connections
a) Follow the instructions in the TV menu – Con-
nections again and select the appropriate
decoder programs.
b) The sound is missing in decoder mode because
the wrong decoder sound is allocated in the TV
menu - Connections
b) Follow the instructions in the TV menu – Con-
nections again and select the right sound
source (decoder, TV or Autom.), see instruc-
tions of the decoder.
No sound through the TV loudspeakers
All menus appear in the wrong language
a) The item ”Sound from...” in the Sound menu
under ”Sound” is not set to ”TV”
b) Nothing is inserted in the 9-pole cube socket
on the back of the set
a) Change the setting to ”TV”.
b) Either a dummy plug with bridges, Loewe
active loudspeaker system, the transmitter for
the home automation or a subwoofer must be
plugged into the cubic socket.
The wrong menu language has been set
Set your menu language:
1. Switch off picture-in-picture (PIP) and switch
✳
off all on-screen displays, press the END but-
ton
2. Call the TV menu, press the MENU button
3. Select the last menu item and press OK
4. Select the last menu item on the last page
and press the OK button
5. Now select the right language and
6. ... confirm with OK.
Digital Link Plus does not work
a) The VCR has not been logged in as a Digital
Link Plus device or has been connected to the
wrong socket
a) Log in the Digital Link Plus VCR under ”Con-
nections” and connect according to the
diagram.
b) The Euro-AV cable is not fully wired (Pin 10
not wired)
b) Change the Euro-AV cable
c) Some video recorders can only take over the
stations from the TV in initial installation
c) Reinstate the original state (ex-factory) of the
VCR (see operating instructions of the VCR)
d) Sort the terrestrial and cable stations so that
they are between 1 and 99.
d) All or some terrestrial or cable stations are
stored at station slots ≥ 99
Various characters are displayed incorrectly in
teletext
The wrong character set is set in the teletext
menu
Set the right character set: Teletext menu – Set-
tings – Character set – Standard or the appropri-
ate character set.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Connections
Mini-DIN (Front) Video IN
Cinch (Front)
Cinch (Front)
Jack 6,3mm (Front) headphones
IEC socket 75 Ohm
F-socket 75 Ohm
Mechanical data
Electrical data
Y/C (S-VHS/Hi8)
CVBS (VHS/8mm)
L/ R
Aventos 3770 ZW
Aventos 3970 ZW
Article no. 63447
Article no. 62407
Chassis name
Media Plus (Q2500/B)
PAL/SECAM 100 Hz
PAL 60/NTSC 120 Hz
Video IN
Audio IN
Image refresh frequency
Dimensions (cm)
Weight (kg)
Picture tube
Format
72,5 x 53,5 x 49,5 (WxHxD)
38,5
32–200 Ohm
✳
✳
Full Digital 100
AMD /DNC
antenna/cable/DVB-T
SAT and SAT A/D
Y/C (S-VHS/Hi8)
CVBS (VHS/8mm)
L/ R
✳
Real Flat-Line
16:9
Power supply
220V up to 240V/50–60Hz
AV 1
AV 2
Video IN/OUT
Power consumption in operation approx.145 Watt
Standby <2.5 Watt
Video IN/OUT
Audio IN/OUT
Video IN/OUT
Video IN/OUT
Video IN
Screen class
70 cm, visible 66 cm
Sat-Record-Mode <60 Watt
Aventos 3772 Z
Aventos 3972 ZP
Dimensions (cm)
Weight (kg)
Article no. 63446
Article no. 62406
74,0 x 59,5 x 49,5 (WxHxD)
44
✳✳
Y/C (S-VHS/Hi8)
CVBS (VHS/8mm)
RGB
Ambient temperature
Tuner VHF/UHF/ cable
(Hyperband 8 MHz)
5º – 40º Celsius
42 MHz – 860 MHz
220/with DVB:1470
B/G, I, DK, L, L‘, M, N
PAL, SECAM,
NTSC, NTSC 4,43
FM, AM, Nicam
mono/stereo/2-sound
2 x 12 Watt / 8 Ohm
2 x 20 Watt / 8 Ohm
HiText (Level 2.5)
Audio IN/OUT
L/R
✳
Station memory
Picture tube
Format
Real Flat-Line
Cinch
Audio OUT
level adjustable/fixed
active loudspeaker systems
✳
TV norms
4:3
✳
9-pole cube socket
Mini-DIN 8-pole Service or Loewe audio systems
✳
Color norms
Screen class
72 cm, visible 68 cm
Aventos 3781 ZW
Aventos 3981 ZW
Modus C 32
Dimensions (cm)
Weight (kg)
Article no. 63454
Article no. 64433
Article no. 64432
81 x 59,5 x 55,5 (WxHxD)
53
✳
✳
depending on equipment and type of set or
Sound norm
retrofittable
OUT only in Digital Link Plus video recorders
✳✳
Audio rated output
Audio music output
Teletext
Picture tube
Real Flat-Line
Format
16:9
Screen class
81 cm,visible 76 cm
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories available
Racks
Home automation
Ask your dealer, he will be able to offer you the
right rack from the Loewe range to suit your TV
set.
Controlling of light switches, dimmers, rolling
shutters etc. with the TV set menu.
Loewe Video Recorders
Single / twin SAT tuners and digital TV
decoders
Loewe video recorders are specially adapted
in design, user guidance and technical charac-
teristics to Loewe TV sets with the result that
daily handling of the equipment is made much
simpler.
Your TV set can be retrofitted with an integrated
SAT 6 or TWIN-SAT 6 and a digital TV decoder.
A combination of the two components enables
you to receive analogue and digital satellite
programmes.
Loewe DVD-Players and -Recorders
The Digital TV 1 Sat/Twin Sat and the Digital-
TV upgrade kit 2 S-Basic upgrade kit enables
you to receive all unencoded digital satellite
programmes.
All uncoded digital terrestrial programs can
be received with the Digital-TV upgrade kit 2
T-Basic.
The following modules are available for recepti-
on of coded (and uncoded) digital TV programs
(e.g. Premiere):
The Digital-TV upgrade kit 2 Sat/Twin-Sat-CI P
for satellite reception and the Digital-TV upgra-
de kit 2 T-CI for terrestrial Digital-TV programs.
In addition, the Digital TV upgrade kit 2 T/S-CI is
available for reception of satellite and terrestrial
coded TV programs.
The DVD-Players and -Recorders from Loewe are
characterised by form and colour which match
Loewe TV sets, adapted user guidance and tech-
nology. A combination of the two devices forms
a system which offers many advantages.
Loewe audio systems and active
loudspeaker systems
A combination of a Loewe TV set, a Loewe
audio system and a Loewe loudspeaker system
provides an excellently adapted Home Cinema
system with the advantages of high operating
comfort, matching design and adapted technol-
ogy.
All modules are integrated in the TV set and are
operated by the remote control/menu control of
the TV.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Service-addresses
International Dynamics Australasia Pty Ltd.
129 Palmer Street
AUS - Richmond, Victoria 3121
Tel. 03–94 29 08 22
Fax 03–94 29 08 33
Australia
Germany
Poland
Loewe Opta GmbH
Kundendienst Zentrale
Indurstriestraße 11
D–96317 Kronach
Tel. 09261–990
Piotech
ul. Boh. Getta Warszawskiego 18
PL–81-609 Gdynia
Tel./Fax 058–62 43 467 / 058–62 45 009
Portugal
Videoacustica
Fax 09261–95411
Austria
Loewe Austria GmbH
Parkring 10
A–1010 Wien
Tel 01–51 63 33 034
Fax 01–51 63 33 032
Great Britain
LinnSight Ltd.
PO Box 8465
Prestwick
UK – KA 7 2YF
Tel. 01292–47 15 52
Fax 01292–47 15 54
Comercio e Representacoes de
Equipamentos Electronicos S.A.
Estrada Circunvalacao
Quinta do Paizinho, Arm. 5
P–2795-632 Carnaxide
Tel. 21–42 41 770
Benelux
Loewe Opta Benelux NV/SA
Uilenbaan 84
B–2160 Antwerpen
Tel. 0902–88 00 2
Tel. 03–270 99 30
Fax 03–271 01 08
Loewe Opta Nederland B.V.
Ravenswade, 54A1
NL–3439 LD Nieuwegein (Utrecht)
Tel. 0900–20 20 180
Fax 030–280 33 27
Fax 21–41 88 093
Greece
Slowenia
SOUND HELLAS S.A.
Kleanthous Str. 10
GR–54642 Thessaloniki
Tel. 2310–856 100
Fax 2310–856 300
Jadran Trgovsko Podjetje
Partizanska cesta 69
SL–6210 Sezana
Tel. 057–310 441
Fax 057–310 442
Hungary
Basys Magyarorszagi KFT
Epitok utja 2–4
H–2040 Budaörs
Tel. 023–415 637/121
Fax 023–415 182
South Africa
THE SOUNDLAB PTY LTD
P.O. Box 31952
Kylami 1684
CIS
Republic of South Africa
Tel. 011–46 64 700
Fax 011–46 64 285
Service Center Loewe
ul. Verkhnyaya Maslovka, d. 29
RUS–125083 Moscow
Tel. 095–212 50 43, 956 67 64
Fax 095–212 47 10
Israel
RIF TRADING LTD
29 Izhak Sade Street
ISR–Tel Aviv 67213
Tel. 03–62 40 555
Fax 03–62 40 303
Spain
Gaplasa S.A.
Conde de Torroja, 25
E–28022 Madrid
Tel. 91–748 29 60
Fax 91–329 06 71
Cyprus
L&M Euroappliances Ltd
P.O. Box 23426
Kennedy Avenue 1A&B
CY–Nicosia
Italy
Loewe Italiana srl
Lago del Perlar, 12
I–37135 Verona
Tel. 045–82 51 611
Fax 055–82 51 622
Sweden
Canseda AB
Amalia Jönssons Gata 19
S–421 31 Västra Frölunda
Tel. 031–70 93 760
Fax 031–47 65 15
Tel. 02–42 05 10
Fax 02–42 87 70
Czech Republic
TIPA sdruzení
Dolní nám. 9
CZ–746 01 Opava 1
Tel: 0553-62 49 44
Fax: 0553-62 31 47
Malta
Mirage Holdings Ltd
Flamingo Complex
Cannon Road
M–Qormi
Switzerland
Telion AG
Rütistrasse 26
CH-8952 Schlieren
Tel. 01–732 15 11
Fax 01–730 15 02
Denmark
Tel. 22 79 40 00
Fax 21 44 59 83
Kjaerulff 1 Development A/S
Vestre Stationsvej 9
DK–5000 Odense C
Danmark
Marocco
SOMARA S.A.
377, Rue Mustapha El Maani
MA–20000 Casablanca
Tel. 02–22 20 308
Fax 02–22 60 006
Turkey
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul
Tel. 0661–354 80
Fax 0661–354 10
Tel. 0216–523 15 94/96
Fax 0216–523 16 58
France
Loewe France S.A.
11 rue de la Durance
F–67100 Strasbourg Cédex 1
Tel. 03–88 79 72 50
Fax 03–88 79 72 59
Norway
CableCom AS
Printed in Germany
2/10.04/5,0
Subject to modification
Østre Kullerød 5
N–3214 Sandefjord
Tel. 033–48 33 48
Fax 033–44 60 44
25
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|