Life Fitness Home Gym 805 User Manual

805 FLAT & INCLINE  
BENCH SYSTEM  
WARNING:  
Read and follow all directions  
for each step to insure proper  
assembly of this product.  
USER’S GUIDE  
CLASS H  
Version: 805109  
Revision: 03/15/04  
PART# 7710901  
REV.B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT NOTES  
Please note:  
* Thank you for purchasing the ParaBody 805 Gym System. Please read these  
instructions thoroughly and keep them for future reference. This product must be assembled  
on a flat, level surface to assure its proper function.  
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT  
securely tighten any frame connections until the entire frame has been assembled, unless  
otherwise stated.  
Tools Required forAssembly  
* 3/4” wrench  
* 9/16” wrench  
* Ratchet with 3/4” and 9/16” sockets  
* Adjustable wrench  
* Tape measure  
Bolt Length Ruler  
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OFTHE HEAD OFTHE BOLT.  
BOLT LENGTH  
BOLT LENGTH RULER:  
1/2  
1/2  
1/2  
1/2  
1/2  
1/2  
0
1
2
3
3
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1’  
2’  
3’  
4’  
1’  
2’  
3’  
4’  
5’  
6’  
1 Square = 1’ X 1’  
Download from Www.Somanuals.co4m. All Manuals Search And Download.  
PARTS LIST  
KEY PART #  
DESCRIPTION  
REAR BASE  
QTY  
1
KEY PART #  
DESCRIPTION  
U-PIN  
QTY  
1
1
2
7710709  
6706209  
6705709  
6681910  
6624210  
6624310  
6623710  
6236509  
6706021  
6705821  
6412001  
6692601  
6406401  
7234801  
6590801  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
7339901  
3118401  
3235204  
3235212  
3235405  
3235312  
3235426  
3114403  
3114401  
3114702  
3114701  
3221705  
7656301  
3235207  
SWIVELPLATE  
1
4VINYLCAP  
3/8 X 1" BOLT  
3/8 X 3" BOLT  
1/2 X 1-1/4” BOLT  
1/2 X 3" BOLT  
1/2 X 6-1/2" BOLT  
3/8" FLAT WASHER  
1/2" FLAT WASHER  
3/8" NYLOCK NUT  
1/2" NYLOCK NUT  
E-RING  
1
3
BENCHFRAME  
1
6
4
1/4 X 2 X 16-1/2” PLATE  
LEFTBACK PADANGLE  
RIGHTBACK PADANGLE  
WOLFFSLEEVE  
2
2
5
1
2
6
1
2
7
1
1
8
2 SQ. X 18” TUBE  
BACK PAD  
1
10  
4
9
1
10  
11  
12  
13  
14  
15  
SEAT PAD  
1
4
3/8” SPRING PINASSEMBLY  
3 X 2” END CAP  
1
5
1
1
HINGETAB  
2
WHEEL  
2
2” SQ END CAP COVER  
3 X 2” GUIDE INSERT  
4
3/8 X 1-3/4” BOLT  
2
2
STEP 1:  
12  
• Insert one 3 X 2” END CAP (12) into top of the REAR  
BASE (1) as shown in FIGURE 1.  
• Slide two END CAPS (14) over the ends of the  
REAR BASE (1). See FIGURE 1.  
1
28  
SECURELYassemble twoWHEELS (28) to the REAR  
BASE (1) using two 3/8 X 1-3/4” BOLTS (29) and two  
3/8” LOCK NUTS (26) as shown in FIGURE 1.  
26  
3/8 X 1-3/4” 29  
14  
FIGURE 1  
STEP 2:  
• Slide two 2” SQ END CAP COVER (14) over the  
ends of the 2 SQ. X 18” TUBE (8). See FIGURE 2.  
8
14  
FIGURE 2  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
7
21 1/2 X 3”  
24  
27  
3
1
17  
2
11  
16  
26  
8
23  
25  
23  
3/8 X 3” 19  
FIGURE 3  
STEP 3:  
• Snap two 3 X 2” GUIDE INSERTS (15) into the ends of the WOLFF SLEEVE (7) as shown in FIGURE 3.  
• Insert 3/8” SPRING PIN ASSEMBLY (11) into the spring pin barrel on WOLFF SLEEVE (7) and tighten nut  
securely. See FIGURE 3.  
• Slide one 4” VINYL CAP (17) over the U-PIN (16) as shown in FIGURE 3.  
• Slide U-PIN (16) through the bushing on WOLFF SLEEVE (7) and attach with E-RING (27)  
• Slide the WOLFF SLEEVE (7) over the BENCH FRAME (3).  
• Securely assemble the BENCH FRAME (3) to the REAR BASE (1) & the SWIVELPLATE (2) using two 1/2 X 3”  
BOLTS (21), two 1/2” FLAT WASHERS (24), and two 1/2” NYLOCK NUTS (26) as shown in FIGURE 3.  
• Securely assemble the 2 SQ. X 18” TUBE (8) to the BENCH FRAME (3) using two 3/8 X 3” BOLTS (19), four  
3/8” FLAT WASHERS (23), and two 3/8” NYLOCK NUTS (25). See FIGURE 3.  
1/2  
1/2  
1/2  
1/2  
1/2  
1/2  
0
1
2
3
6
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
4
2
4
7
3
1/2 X 6-1/2” 22  
13  
FIGURE 4  
STEP 4:  
• Attach two 1/4 X 2 X 16-1/2” PLATES (4) to the bushing on the SWIVEL PLATE (2) using one 1/2 X 6-1/2”  
BOLT (22) and one 1/2” NYLOCK NUT (26). See FIGURE 4.  
• Slide two HINGE TABS (13) over the shaft on the WOLFF SLEEVE (7) as shown in FIGURE 4.  
6
5
4
24  
26  
1/2 X 1-1/4” 20  
4
20 1/2 X 1-1/4”  
24  
7
FIGURE 5  
STEP 5:  
• Slide the LEFT (5) & RIGHT (6) BACK PAD ANGLES over the shaft on the WOLFF SLEEVE (7) as shown  
in FIGURE 5.  
• Attach the LEFT (5) & RIGHT (6) BACK PAD ANGLES to the 1/4 X 2 X 16-1/2” PLATES (4) using two  
1/2 X 1-1/4” BOLTS (20), two 1/2” FLAT WASHERS (24), and two 1/2” NYLOCK NUTS (26).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
6
5
4
10  
13  
* All connections use one 3/8 X 1” BOLT (18) and one 3/8” FLAT WASHER (23)  
FIGURE 6  
STEP 6:  
• Securely fasten the BACK PAD (9) to the LEFT (5) and RIGHT (6) BACK PAD ANGLES using four 3/8 X 1”  
BOLTS (18) and four 3/8” FLAT WASHERS (23) as shown in FIGURE 6.  
• Securely fasten the SEAT PAD (10) to the HINGE TABS (13) using two 3/8 X 1” BOLTS (18) and two 3/8”  
FLAT WASHERS (23) as shown in FIGURE 6.  
• Securely tighten the four connections on the 1/4 X 2 X 16-1/2” PLATES (4), then back nuts off 1/4 of a turn or  
until the BACK PAD (9) adjusts easily.  
THIS CONCLUDES THE ASSEMBLY OF THE 805 FLAT & INCLINE BENCH  
1/2  
1/2  
1/2  
1/2  
1/2  
1/2  
0
1
2
3
8
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Please note:  
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy  
water. Touch-up paint can be purchased from your ParaBody customer service representative  
at (800) 328-9714.  
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.  
Failure to do so may result in serious injury  
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT  
YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION.  
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND  
MAIL BACK.  
MODEL #________________________  
SERIAL #_________________________  
DATE OF PURCHASE: _____________  
DEALERS NAME: _________________  
SERIAL NUMBER  
DEALERS PHONE #_______________  
Thank you for purchasing the ParaBody 805 Gym System.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY.  
1. LIMITED WARRANTY ON FRAMEAND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired  
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.  
2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will supply replacement parts:  
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad  
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring  
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.  
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,  
ParaBody will repair or replace them, at its option. Terms: Three (3) years.  
4. CONDITIONSAND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized  
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of  
ParaBody will void this Limited Warranty.  
5. REPLACEMENT AND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is  
responsible for all other costs. Such costs may include, but are not limited to: a. labor charges for service, removal, repair or reinstallation  
of the ParaBody product or any component part; b. shipping, delivery, handling and administrative charges for returning parts to ParaBody;  
and c. all necessary or incidental costs related to installation of the replacement parts.  
6. SHIPPING. If shipping by the Owners is deemed necessary (in sole discretion of ParaBody), parts should be shipped in their original carton  
or equivalent packaging, fully insured with shipping charges prepaid. ParaBody will not assume any responsibility for any loss or damage  
incurred in shipping.  
7. CLAIM PROCEDURES. If service on your ParaBody product is required during the warranty period, please contact our Customer Service  
Department at 1-800-328-9714 for instructions regarding returning or replacing parts. Please have available the following information: (i) the  
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly  
drawing included with your assembly instruction); (iv) a description of the nature of the problem.  
8. OWNER’S RIGHT. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary depending on local law.  
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater  
duration than the warranty period set forth above. There are no warranties which extend beyond the description in this Limited Warranty.  
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.  
10. DISCLAIMER. No other express warranty has been made or will be made on behalf of ParaBody with respect to any ParaBody product or  
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody  
product, inconvenience, loss or damage to personal property, whether direct or indirect, and incidental or consequential damages, so the  
above limitation or exclusion may not apply to you.  
NOTES:  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIFEFITNESS  
5100 North River Road. Schiller Park, IL. 60176 U.S.A.  
Tel: 847.288.3300 Fax: 800.216.8893  
800.328.9714 (Toll-free within the U.S. and Canada)  
INTERNATIONALOFFICES  
Life FitnessAtlantic BV  
Life Fitness (UK) Ltd.  
QueenAdelaide  
Ely, Cambs CB7 4UB  
United Kingdom  
Phone CSS: (01353) 665507  
Fax CSS: (01353) 666719  
Atlantic Headquarters  
Bijdorpplein 25-31  
2992 LB Barendrecht  
The Netherlands  
Phone: (180) 646 666  
Fax: (180) 646 703  
Life Fitness EUROPE GmbH  
Siemensstrasse 3  
Life Fitness Benelux N.V.  
Bijdorpplein 25-31  
85716 Unterschleissheim  
Germany  
2992 LB Barendrecht  
The Netherlands  
Phone: (089) 31 77 51-0  
Fax: (089) 31 77 51 99  
Phone: 31 (180) 64 66 69  
Fax: 31 (180) 64 66 99  
Life Fitness Japan  
8/F, Nippon Brunswick Building  
5-27-7 Sendagaya  
Shibuya-Ku, Tokyo 151-0051  
Japan  
Phone: 81 (3) 3359-4309  
Fax: 81 (3) 3359-4307  
Life Fitness Italia S.R.L.  
Via Elvas 92  
39042 Bressanone  
Italy  
Phone: 39 (472) 835-470  
Fax: 39 (472) 833-150  
Life Fitness Do Brazil  
Al. Rio Negro, 433-Predio 2-Sala 2  
3º andar (Confab)  
Aplhaville-Barueri-Sao Paulo  
CEP: 06454-904  
Life FitnessAsia Pacific Limited  
Room 2610, Miramar Tower  
132 Nathan Road, Tsimshatsui  
Kowloon, Hong Kong  
Phone: (852) 2891-6677  
Fax: (852) 2575-6001  
Brazil  
Phone: 55 (11)7295-2217  
Fax: 55 (11) 7295-2218  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kuhn Rikon Saw 10 110B E User Manual
La Crosse Technology Portable Radio WS 7138U User Manual
Masterbuilt Charcoal Grill 20040311 User Manual
MaxTech Oxygen Equipment OM 25ME User Manual
Maxtor DVR 777 W V10 User Manual
Maytag Microwave Oven 3828W5A4194 User Manual
Maytag Range MER6772BAW User Manual
Micro Innovations Digital Camera IC435C User Manual
Microsoft Personal Computer E3484 User Manual
Microsoft Server Windows NT 40 User Manual