Legend Audio Flat Panel Television L4269 User Manual
L4269  
Thank you for choosing Legend.  
Need help fast?  
Legend  
LEGEND  
24 Hours a Day/ 7 Day a Week  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,  
or sold with the apparatus. When a cart is used, use caution when moving the cart/  
Apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged  
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
15)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
16)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the  
apparatus normal use.  
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.  
Owner s Manual 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Contents  
Video Menu  
Warning . . . . . . . .............. . . . . . . . . . . . . . . . . . . . . .  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
2
3
How to select picture mode..................................  
How to customize your own picture status .............  
VGA Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..  
Audio Menu  
How to select audio mode.....................................  
How to customize your own audio status ...............  
SAP Broadcasts Setup.........................................  
Function Menu  
Menu Language...................................................  
OSD Timeout.......................................................  
OSD Transparency...............................................  
Screen Mode.......................................................  
Blue Screen.........................................................  
DPMS.................................................................  
Time zone setting.................................................  
Date /Time setting................................................  
Sleep Timer setting..............................................  
DTV Caption Style................................................  
Lock Menu  
20  
20  
21  
Introduction  
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...........  
5
6
7
Connection Options . . . . . . . . . . . . . . . . . . . . . .........  
Remote control . ............ . .. . . . . . .......... . ..........  
Installation  
22  
22  
22  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........  
Antenna Connection . . . . . . . . . . ..........................  
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . ...........  
External A/V Source Setup . . . . .. . . . . ..................  
Connecting a DVD player . . . . . ...... . . . . . . . . . . . . .  
Connecting a DTV(digital TV) ..............................  
Connecting digital audio output . . . . . . . . . . . . . . . . .  
Connecting a computer. . . . . . . . . . . . . . . . . . . . . . . .  
Monitor Out Setup. . . . . . . . . . . . . . . . . . . . .............  
8
8
9
10  
10  
11  
11  
12  
13  
HDMI and DVI input. . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Cable sample......................................................  
14  
13  
Connecting Headphones . . . . . . . . . . . . . . . . . . . .....  
Power source................ . . . . . . . . . . . . . . . . . . . . . .  
Removing the table stand and installing a  
wall mount bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operation  
15  
15  
Parental Control rating and categories...................  
Lock setup...........................................................  
Other Functions  
16  
Brief Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............  
Using the Guide. . . . . . . . . . . . . . . . . . . . . . . ............  
Quick program view..............................................  
CC (Closed Caption Display) . . . . . . . . . . . . . ... . .. .  
USB Input............................................................  
Universal Remote Control  
Switching On/Off the TV set . .. . .... . .. . .. . .. . ....  
Choose the Menu Language . . . . .........................  
Choose the input source......................................  
Channel Menu  
Channel Scan............... . . . .. . .. . .. . .. . .. . .. . ..  
Channel Skip....... . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Select the desired program. . . . . . . . . . . . . . . . . . . . .  
Select the desired sound. . . . . . . . . . . . . . . . . . .. . . .  
Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
17  
17  
17  
18  
18  
19  
19  
19  
Setting up your remote control ..............................  
Remote Control Codes ........................................  
Maintenance . . ...... . . . . . . . . . . . . . . . . . . . . . . . . . .  
Product Specification . . . . . . . . . . . . . . . . . . . . . . .  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
4
TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Controls  
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.  
TV Side panel controls and connections  
HL26R1/HL32R1/HL42XR1  
HL26K1/HL32K1/HL32XK1/HL42XK1  
1.MENU: Menu display. Press to access the on-screen menu display  
2.INPUT: Press to access the input source mode. Press repeatedly to change the source to the one you want to  
watch. In the MENU screen, the INPUT button serves as the ENTER button.  
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttonsserve as left/rightbuttons.  
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down  
either +/- . In the MENU screen, these buttonsserve as up/downbuttons.  
5.POWER: Press toturn on andoff the TV.  
6.USB input: Connect a USB flash drive to view JPEG images or listen to MP3 songs.  
7.Av2 AUDIOIN: Connect the audioL/R cables fromthe video signalsource to thesejacks.  
8.AV2 VIDEO IN: Connects the compositevideo cable froman external signalsource to thisjack.  
9.Headphone jack : Headphone audio output terminal.  
10.HDMI IN: Connect aHDMI device to receive digital audio and uncompressed digital video signals.  
11.Remote Sensor Receives IR signals from the remote control.  
Do not put anything near the sensor ,which may block the remote control signal.  
Owner s Manual 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Connection Options  
Back panel connections  
2
1
L
DVI AUDIO  
R
2
1
Pb  
Y
Pr  
R
L
AUDIO  
R
L
VGA AUDIO  
VGA  
1
S-VIDEO  
VIDEO  
L AUDIO  
AUDIO  
R
L AUDIO  
R
1. Digital Audio Output: Connect various types of digital audio equipment.  
NOTE: In standby mode, these ports will not work.  
2. DVI Audio In: When using a DVI to HDMI adapter, connect the audio signal to these jacks.  
3. Antenna Input: Connect cable or antenna signals to the TV, either directly or through your cable box.  
4. HDMI In: Connect a HDMI device to receive digital audio and uncompressed digital video.  
5.VGA Audio In: Connect the audio L/R cables from a computer to this jack.  
6.VGA Video In: Connect a video cable from a computer to this jack.  
7. VIDEO In: Connects the video signal from a video device.  
8. Component Video In: Connect a component video device to these jacks.  
9. AUDIO In: Connect the audio L/R cables from the video signal source to these jacks.  
10. S-VIDEO In: Connect the S-Video cable from an external signal source to this jacks.  
11. COMPONENT AUDIO In: Connect the audio L/R cables from the component video signal source to these jacks.  
12. AUDIO In: Connect the audio L/R cables from the S-Video signal source to these jacks.  
13. AUDIO Out: Connect the audio L/R cables to your audio equipment.  
6
TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Universal Remote control  
The remote control cannot be operated unless the batteries are properly loaded.  
When using the remote control, aim it at the remote sensor on the TV.  
1.POWER  
Press to turnon and off the TV.  
2.TV DVD SETBOX CABLE VCR AUD  
Function introduction  
To select one of the system modes in which the remote control  
can be used.  
3.PICTURE  
1
DVD  
TV  
Press repeatedly tocycle through theavailable picture modes.  
4. AUDIO  
Press to cyclethrough different sound settings.  
5.INPUT  
Show the input source.  
2
STB  
CABLE  
VCR  
PC  
AUD  
PICTURE AUDIO  
HDMI  
15  
16  
3
4
6.MUTE  
Switches the video sound on oroff.  
7.VOLUME UP/DOWN  
Press to adjust the volume.  
8.MENU  
Press to open the on-screen menu.  
9.THUMBSTICK (Up/Down/Left/Right/ENTER)  
Allows you tonavigate the on-screenmenus and adjust  
the system settings to your preference.  
10.SLEEP button  
17  
Press to display the sleep timer option.  
11. USB: Press to switch input source to USB in.  
12. MTS/SAP  
Selects MTS sound: Mono, Stereo, and SAP in Analog  
mode. Change the audio language in DTV mode.  
13.GUIDE  
INPUT  
MUTE  
18  
19  
5
6
RECALL  
7
VOL  
CH  
Press to display the guide when you are watching analog or  
digital channels.  
14.CCD(closed caption)  
20  
21  
MENU  
EXIT  
Select a closed caption.  
8
9
15.HDMI:Press to select a device connected to the HDMI input  
16.PC:Press to select the computer connected to the VGA input  
17.Number buttons  
Press to change a channel.  
18. button  
22  
ENTER  
Press to select digital channels. For example, to enter  
“54-3”, press “54”, “ ” and “3”.  
19.RECALL  
SLEEP  
DISPLAY  
Press to jump back andforth between twochannels.  
20.CHANNEL UP/DOWN  
Press to scanthrough channels. To scan quickly between the  
last two channels, press and holddown either +/-.  
21.EXIT  
Clears all on-screen displays and returns to TV viewing  
from any menu.  
22.ENTER  
Accesses the highlighted item in the on-screen menu  
23.DISPLAY  
10  
23  
24  
USB  
REV  
PLAY/PAUSE  
STOP  
PREV  
REC  
11  
12  
NEXT  
REPEAT MTS/SAP FREEZE CH.LIST  
25  
26  
GUIDE  
CCD  
ARC  
FAVORITE  
13  
14  
27  
28  
Press to displaythe TV status information onthe top ofthe TV  
screen.  
24.USB Functions  
Control the USBSystem.  
/
Rewind / Fast  
Stop Play/Pause  
25.FREEZE  
Press once todisplay a frozenimage of thecurrent program,  
but audio continues. Press again toreturn to the program.  
26.CH.LIST  
/
backward /Forward  
REC REPEAT Repeat  
Open the channellist in TV.  
27.FAV.LIST  
Press to open the favoritechannel list in TV.  
28.ARC(Aspect Ratio Control)  
Press to change the aspect ratio.  
Owner s Manual 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
Accessories  
DVD  
TV  
STB  
CABLE  
VCR  
AUD  
R
PICTURE AUDIO  
PC  
HDMI  
TFT-LCD TV  
OWNER'S MANUAL  
INPUT  
MUTE  
RECALL  
Please READ this manual carefully before  
operating your TV, and retain it for future  
reference.  
VOL  
CH  
MENU  
EXIT  
ENTER  
SLEEP  
DISPLAY  
USB  
REV  
PLAY/PAUSE  
STOP  
PREV  
REC  
NEXT  
REPEAT MTS/SAP FREEZE CH.LIST  
GUIDE  
CCD  
ARC  
FAVORITE  
MODELS:  
HL26K HL37T  
HL32K HL52T  
HL37K  
HL42K  
HL47K  
Remote control  
Owner`s manual  
Alkaline battery(AAA)  
2
Antenna Connection  
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
Wall Antenna  
Socket  
Bronze Wire  
RF Coaxial Wire (75 ohm)  
VHF Antenna  
UHF Antenna  
Turn clockwise to tighten  
Bronze Wire  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
Outdoor  
Antenna  
Be careful not to bend the bronze wire  
when connecting the antenna.  
To improve the picture quality in a poor signal area,  
please purchase a signal amplifier and install properly.  
If the antenna needs to be split for two TV`s, install a  
2-Way Signal Splitter in the connections.  
To install the antenna properly please contact a  
professional in your area.  
8
TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
NOTE: All cables shown are not included with the TV.  
Choose Your Connection  
There are several ways to connect your television,  
depending on the components you want to connect and  
the quality of the signal you want to achieve. The  
following are examples of some different ways to connect  
your TV with different input sources.  
Connecting a VCR  
To avoid picture noise (interference), leave an adequate  
distance between the VCR and TV.  
Connection Option 1  
Set VCR output switch to channel 3 or 4 and then tune  
the TV to the same channel number.  
2
1
L
DVI AUDIO  
R
2
Connection Option 2  
1. Connect the audio and video cables from the VCR's  
output jacks to the TV input jacks, as shown in the figure.  
1
When connecting the TV to VCR, match the jack colors  
(Video = yellow, Audio Left = white, and Audio Right = red).  
If you connect a S-VIDEO output from VCR to the  
S-VIDEO input, the picture quality is improved;  
Pb  
Y
Pr  
R
L
AUDIO  
R
L
VGA AUDIO  
VGA  
1
VIDEO  
L AUDIO  
S-VIO  
AUDIO  
R
VIDEO  
L AUDIO  
R
compared to connecting a regular VCR to the Video input.  
2. Insert a video tape into the VCR and press PLAY on  
the VCR. (Refer to the VCR owner`s manual.)  
3. Select the input source with using the  
INPUT button on the remote control, and  
then press  
press ENTER button to confirm.  
/
button to select the source,  
Owner s Manual 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
External A/V Source Setup  
How to connect  
Connect the audio and video cables from the external  
equipment's output jacks to the TV input jacks, as shown  
in the figure.  
When connecting the TV to external equipment, match the  
jack colors (Video = yellow, Audio Left = white, and Audio  
Right = red).  
2
1
L
DVI AUDIO  
R
2
1
How to use  
1. Select the input source with using the INPUT button on  
the remote control.  
Pb  
VGA AUDIO  
VGA  
Y
Pr  
R
L
AUDIO  
R
L
1
2. Press  
3. Press ENTER button to confirm.  
/
button to select the desired source.  
VIDEO  
L AUDIO  
S-VIDEO  
AUDIO  
R
VIDEO  
L AUDIO  
R
4. Operate thecorresponding external equipment.  
Camcorder  
Connecting a DVD player  
How to connect  
Video Game Set  
1. Connect theDVD video outputs(COMPONENT) to  
the Y Pb Pr jacks on the TV and connect the DVD audio  
outputs to the YPbPr Audio IN jacks on the TV, as  
shown in the figure.  
2. If your DVD onlyhas an S-VIDEOoutput jack,  
connect this to the S-VIDEO inputon the TV. as shown  
in the figure.  
2
1
L
DVI AUDIO  
R
2
Note  
If your DVD player does not have component video  
output, use S-Video.  
1
1
b  
VGA AUDIO  
VGA  
Pr  
R
L
AUDIO  
L
How to use  
1. Turn on the DVD player, insert a DVD.  
2. Use INPUTbutton on theremote control toselect  
component mode.  
VIDEO  
L AUDIO  
S-VIO  
AUDIO  
VIDEO  
L AUDIO  
R
3. Press Play button on external equipment for program  
play.  
4. Refer to the DVD player's manual for operating  
instructions.  
Component Input ports  
To get better picture quality, connect a DVD player to the  
component input ports as shown below.  
Component ports  
on the TV  
Y
Pb  
Pb  
Pr  
Pr  
Y
Y
Y
Y
Video output ports  
on DVD player  
B-Y R-Y  
Cb  
Cr  
P
P
B
R
10 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
Connecting a DTV(digital TV)  
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive  
Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.  
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).  
How to connect  
Use the TV`s COMPONENT , VGA or HDMI  
jack for video connections, depending on  
your set-top box connector. Then, make  
the corresponding audio connections.  
2
L
DVI AUDIO  
2
1
How to use  
1. Turn on the digital set-top box. (Refer to the  
R
1
owner`s manual for the digital set-top box.)  
2. Use INPUT on the remote control to select  
COMPONENT , VGA or HDMI source.  
P
VGA AUDIO  
Y
P
R
L
AUDIO  
R
L
1
Signal  
480i  
COMPONENT  
HDMI  
Yes  
VIDEO  
L AUDIO  
S-VIDEO  
AUDIO  
R
VIDEO  
L AUDIO  
R
Yes  
Yes  
Yes  
Yes  
Yes  
480p  
720p  
1080i  
1080p  
Yes  
Yes  
Yes  
Yes  
HDMI  
Digital Set-top Box  
Connecting a digital audio output  
Send the TV`s audio to external audio equipment (stereo  
system) via the Digital Audio Output (Optical) port.  
How to connect  
1. Connect one end of an optical cable to the TV Digital  
Audio(Optical) Output port.  
2. Connect the other end of the optical cable to the digital  
audio (optical) input on the audio equipment.  
See the external audio equipment instruction manual for  
operation.  
2
1
L
DVI AUDIO  
R
2
1
Pb  
VGA AUDIO  
VGA  
Y
1
Pr  
R
L
AUDIO  
R
L
Note  
When connecting with external audio equipments, such  
as amplifers or speakers, please turn the TV speakers off.  
VIDEO  
L AUDIO  
S-VIDEO  
AUDIO  
R
VIDEO  
L AUDIO  
R
Caution: Do not look into the optical output  
port. Looking at the laser beam may damage  
your vision.  
!
Owner s Manual 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
Connecting a computer  
How toconnect  
1. To getthe bestpicture quality, adjustthe VGAgraphics card to 1024x768 .  
2. Usethe TV`sVGAor DVI(Digital VisualInterface)Audio INport foraudio connections,depending on your computer  
connector.  
If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of  
either VGAIN or HDMI IN todisplay the VGAon theTV.  
If the graphic cardon thecomputer doesoutput analogand digitalRGB simultaneously, setthe TVto eitherVGAor  
HDMI ; (theother mode isset to Plugand Play automaticallyby theTV.)  
3. Then,make thecorresponding audioconnection. Ifusing asound card,adjust the VGA sound as required.  
How touse  
1. Turnon the computerand theTV.  
2. UseINPUT onthe remotecontrol toselect VGAor HDMIsource.  
3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or  
brightness in VGAmode. If noiseis present, changethe VGAmode to anotherresolution, change therefresh rate to  
another rate oradjust the brightnessand contrast onthe menu untilthe picture isclear. Ifthe refresh rateof the VGA  
graphic cardcan notbe changed,change theVGAgraphic cardor consultthe manufacturerof theVGAgraphic card.  
Note  
1.Use aDVI cable.  
2.Avoid keepinga fixed imageon theTV's screen fora long periodof time.The fixed image may becomepermanently  
imprinted onthe screen.  
3. Thesynchronization inputform forHorizontal andVerticalfrequencies isseparate.  
Resolution  
Frame  
frequency  
(Hz)  
Resolution  
Mode  
2
L
DVI AUDIO  
R
2
1
60Hz  
60Hz  
75Hz  
VGA  
640x480  
800x600  
SVGA  
Pb  
VGA AUDIO  
GA  
Y
Pr  
R
L
AUDIO  
R
L
1
60Hz  
75Hz  
XGA  
1024x768  
VIDEO  
L AUDIO  
S-VIDEO  
AUDIO  
R
VIDO  
L AUDIO  
R
12 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
HDMI and DVI input  
When the source device(DVD player or Set Top Box) supports HDMI  
How To Connect  
1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).  
2. No separated audio connection is necessary.  
How To Use  
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically  
set to 1280x720p.  
If the source device does not support Auto HDMI, you need to set the output resolution appropriately.  
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.  
Select HDMI input source in input source option of Select Main source menu.  
When the source device(DVD player or Set Top Box) supports DVI  
How To Connect  
1. Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).  
2. Aseparated audio connection is necessary.  
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio  
In port located on the left side of HDMI port.  
How To Use  
If the source device supports Auto DVI function, the output resolution of the source device will be automatically  
set to 1280x720p.  
If the source device does not support Auto DVI, you need to set the output resolution appropriately.  
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.  
Press the INPUT button to select HDMI input source in input source option of Select Main source menu.  
Owner s Manual 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Cable sample  
HDMI Cable  
(not supplied withthe product)  
HDMI to DVI Cable  
(not supplied withthe product)  
Analog AudioCable  
(Stereo to RCA type)  
(not supplied withthe product)  
14 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
Connecting Headphones  
You can connect a set of headphones to your set if you wish to watch a  
TV programme withoutdisturbing the otherpeople in theroom.  
Plug a set of headphones into the 3.5mm  
mini-jack socket on the side panel of the set.  
HDMI3 IN  
HDMI4 IN  
Note  
Prolonged use of headphones at a high volume  
may damage your hearing.  
You will not receive sound from the speakers  
when you connect headphones to the system.  
Power source  
AC Outlet  
TO USE AC POWER SOURCE  
Wider Hole  
and Blade  
Use the AC polarized line cord provided for  
operation onAC. Insert theAC cord plug into  
a standard polarizedAC outlet.  
Note  
Never connect the AC line cord plug to other  
than the specified voltage. Use the  
attached power cord only.  
If the polarized AC cord does not fit into a non-  
polarized AC outlet, do not attempt to file or cut  
the blade. Itis the user`sresponsibility to have  
an electrician replacethe obsolete outlet.  
If you cause a static discharge when touching  
the unit and the unit fails to function, simply  
unplug the unit from the AC outlet and plug it  
back in. The unit should return to normal operation.  
Polarized AC Cord Plug  
Owner s Manual 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Removing the table stand and installing a  
wall mount bracket  
HL42XK1  
Remove 4X M4 screws securing the  
stand to the TV, then remove the stand.  
Use 4X M6 screws to secure the wall  
bracket (not supplied)to the backof your TV.  
16 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
In the manual, the OSD (on screen display) may be  
different from your TV`s, because it is just an example to  
help you with the TV operation.  
There are several options you might need to set up in order  
for your TV to work properly. Read the instructions that  
follow.  
Initial Setup: Set according to the screen display.  
Switching On/Off the TV set  
1. First, connect power cord correctly.  
2. Select the viewing source by using INPUT button on  
the remote control.  
3. When finished usingthe TV, press POWER button on  
the remote control. The TV reverts to standby mode.  
4. If you intend to be away on vacation, disconnect the  
power plug fromthe wall poweroutlet.  
Note  
If the TV in power on , the screen show information  
according the type of input signal . the information will  
disappear. If there is no signal , No Signal will display  
on the screen.  
Choose the Menu Language  
Language  
English  
Short  
Video  
When you start using your set for the first time, you must  
select the language which will be used for displaying menus  
and indications.  
OSD Timeout  
Audio  
OSD Transparency Middle  
Screen Mode  
Blue Screen  
DPMS  
Normal  
On  
Channel  
1. Choose TV Input and then press MENU button.  
On  
2. Press  
/
button to selectFunction menu.  
Function  
Lock  
Time Setup  
Closed Caption  
Default  
3. Press / ENTER button and then use  
/
button to  
select Language.  
4. Press  
/
button to select language.  
Select  
EXIT Back  
/
Function  
English Spanish or French  
Choose the Input source  
Select Source  
Change the picture source so you can watch your TV,  
VCR, DVD, Cable , or any other devices that are  
connected to your TV.  
TV  
Video1  
Video2  
S-Video  
Component1  
Component2  
PC  
1. Press INPUT button to enter the Select Source menu  
and then use  
/
button to select the desired items  
(TV, Video1, Video2, S-Video,Component1, Component2,  
PC, HDMI1,HDMI2,HDMI3,HDMI4).  
HDMI1  
HDMI2  
HDMI3  
HDMI4  
2. Press ENTER button to confirm .  
Owner s Manual 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Channel menu  
This TV set has two methods to set channels, which are  
respectively Channel Scan, Channel Skip.  
In this section, how to use the remote control to set  
channel is explained. You can also use buttons on the TV to  
set channel.  
Note  
The Channel menu will be only operated in normal TV mode.  
Video  
Tuner  
Antenna  
Channel Scan  
Channel Scan  
Channel Skip  
Audio  
1. Press MENU button and thenuse  
/
button to select  
Channel  
Channel menu.  
Function  
Lock  
2. Press / ENTER button to selectTuner.  
3. Press  
4. Press  
/
button to selectCable or Antenna mode.  
/
button to select Channel Scan.  
ENTER  
Select  
EXIT Back  
Scan  
/
5. Press / ENTER button to start searching.  
Channel  
6. To cancel searching, press EXIT button.  
Video  
Status: Scanning  
Analog Channels: 19  
Antenna  
Note  
Audio  
Digital Channels:  
0
When Antenna is selected, the TV will detect antenna  
signals and will search for antenna TV (NTSC and  
ATSC) channels available in your local area.  
Channel  
64%  
Function  
Lock  
When Cable is selected, the TV will detect cable  
company supplied signals and will search for cable TV  
(NTSC,QAM modulated) channels available in your  
Area.  
EXIT Cancel  
Channel Scan  
Channel Skip  
Video  
Tuner  
Antenna  
A skip channel is skipped when using  
/
button to  
Channel Scan  
Channel Skip  
Audio  
browse the channels. A skip channel can be watch  
by key-in the channel number or select by list.  
Default un-scanned analog channels are skip.  
Channel with a check icon is a skipped channel.  
Channel  
Function  
Lock  
ENTER  
Select  
EXIT Back  
Enter  
/
Channel  
1. Press MENU button and then use  
/
button to select  
1
2
3
4
5
5-1  
6
7
8
9
10  
Analog  
Analog  
Analog  
Analog  
Analog  
Digital KPIX-DT  
Analog  
Analog  
Video  
Channel menu.  
2. Press / ENTER button and then use  
/
button to select  
Audio  
Channel Skip.  
Channel  
3. Press  
/
button to select a channel, then press ENTER  
and  
Function  
Lock  
button to toggle between  
.
Analog  
Analog  
Analog  
ENTER  
Select  
EXIT Back  
Set  
/
Channel Skip  
18 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Select the desired program  
1. Using CH+/- buttons.  
Press CH+ button to select a channel number in  
number increasing direction.  
Press CH- button to select a channel number in  
number decreasing direction.  
Note  
If skip is ON on one channel, press CH+/- button, the  
channel will not appear.  
2. Also can enter channel number directly,eg:2-0.  
Select the desired sound  
Press VOL-/+ buttons on the remote or the front of the  
TV set to adjust the volume level. The range is 0~100.  
When the volume buttons are pressed the volume level  
is displayed automatically on the TV screen.  
Volume  
Mute  
1. Press MUTE button on the remote control and  
icon will display on the screen. At this time, the sound  
of the TV set is turned off.  
2. If you want to recover the sound, pressMUTE  
button again or directly press VOL+ button.  
Owner s Manual 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Video menu  
The TV menu gives you an overview of the menus you can select.  
Note  
Depending on the input signal, one or more menu items may not be selectable.  
How to select picture mode  
The picture mode provides the pre-defined images settings:  
Video  
Mode  
Custom  
Standard, Vivid, Custom and Mild .  
59  
59  
59  
7
Brightness  
Contrast  
Audio  
1. Press MENU button and then use  
/
button to select  
Color  
Video menu.  
Channel  
Tint  
58  
Sharpness  
Color Temperature  
Advanced Video  
2. Press / ENTER button and then use  
/
button to  
Function  
Lock  
select Mode.  
3. Press  
/
button to select the option Standard, Vivid,  
Custom and Mild.  
Select  
EXIT Back  
/
Video  
You can also press PICTURE button on the remote control  
to select the option Standard, Vivid, Custom and Mild.  
How to customize your own picture  
status  
1. Press MENU button and thenuse  
/
button to select  
Video menu.  
2. Press / ENTER button and then use  
select the desired items.  
3. Press / ENTER button and then use  
adjust the setting.  
/
button to  
button to  
/
Mode  
Select the modeof picture(Standard/ Vivid/ Custom/ Mild).  
Brightness  
This will adjust the light output of the complete picture,  
which will mainly affect the darker areas of the picture.  
Note  
Contrast  
This will adjustthe intensity ofbright parts inthe picture  
but keep the dark parts unchanged.  
Only when the item of mode is custom , the  
Brightness, Contrast, Color, Tint, Sharpness  
and Color Temperaturecan be set by user .  
In other modethe value ofthem are preset.  
Color  
This will adjust the saturation level of the colors to suit  
your personal preference.  
Tint  
Allows you to select the color mix (Tint) of the picture.  
Sharpness  
This will adjust the sharpness of fine details in the picture.  
20 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Video menu  
Color temperature  
This will increase or decrease Warm (red) and Cool (blue)  
colors to suit personal preferences.  
Select Cool to give the white colors a blue tint, Standard  
to give the white colors a neutral tint, Warm to give the  
white colors a red tint.  
Advanced Video  
To adjust the picture in advanced: DNR, Black Level Extender,  
White Peak Limiter, CTI, Flech Tone, Adaptive Luma Control.  
DNR  
To adjust reduce the appearance of digitizing error by the compression:  
Off, Weak, Medium, Strong, Auto.  
Video  
DNR  
Medium  
On  
Black Level Extender  
White Peak Limiter  
CTI  
Black Level Extender  
On  
Audio  
To adjust the ability in the black areas detail of the picture: On and Off.  
White Peak Limiter  
Medium  
On  
Flesh Tone  
Channel  
On  
Adaptive Luma Control  
To adjust the ability in the white areas detail of the picture: On and Off.  
CTI  
Function  
Lock  
To adjust the picture for color errors: Off, Weak, Medium and Strong.  
Flesh Tone  
To adjust the flesh color: On and Off.  
Adaptive Luma Control  
Select  
EXIT Back  
/
Advanced Video  
To adjust changes in the luminance of the picture: On and Off.  
VGA Set  
When you select the VGA input, this function is used.  
Video  
Audio  
Mode  
Custom  
Adjustment for screenPosition, Clock, Phase, Setting  
59  
Brightness  
Contrast  
Display adjust menu by pressing INPUT button then use  
59  
Color Temperature  
Advanced Video  
VGA  
/
button to select the the source of VGA item.  
Function  
Lock  
Auto sync: Automatically adjust display of the picture  
(Only available in VGA source).  
Position : Adjust the screen position.  
Phase : Adjust the phase of Pixel clock.  
Clock : Adjust the clock of input signal.  
Select  
EXIT Back  
/
Video  
1. Press MENU button and then use  
/
button to select  
Video menu.  
Video  
Audio  
Auto Sync  
H Position  
V Position  
Phase  
2. Press / ENTER button and then use  
select VGA.  
/
button to  
button to  
59  
59  
59  
59  
3. Press / ENTER button and then use  
adjust the setting.  
/
Function  
Lock  
Clock  
Select  
Enter  
EXIT Back  
/
ENTER  
VGA  
Owner s Manual 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Audio menu  
How to select audio mode  
/
1. Press MENU button and then use  
Audio menu.  
button to select  
0
Video  
Balance  
Bass  
59  
59  
Audio  
Treble  
2. Press / ENTER button and then use  
select Mode.  
/
button to  
Sound Surround  
Mode  
On  
Channel  
Off  
Off  
3. Press / ENTER button to select the option Off, Concert,  
Living Room, Hall, Bathroom, Cave, Arena and Church.  
You can also press AUDIO button on the remote control  
to select the Audio Mode Off, Concert, Living Room, Hall,  
Bathroom, Cave, Arena and Church.  
Equalizer  
SPDIF Type  
AVL  
PCM  
Off  
Function  
Lock  
How to Customize your own audio  
status  
ENTER  
Select  
Adjust  
EXIT Back  
/
Audio  
1. Press MENU button and then use  
Audio menu.  
/
button to select  
2. Press / ENTER button and then use  
select desired items.  
3. Press / ENTER button and then use  
adjust the setting.  
/
button to  
button to  
/
Balance  
Adjust to emphasize left or right speaker balance.  
Bass  
Adjust to increaseor decrease lower-pitchedsounds.  
Treble  
Adjust to increaseor decrease higher-pitchedsounds.  
Sound Surround  
To turn the simulatedsurround sound onand off.  
Mode  
To adjust the audio mode: Off, Concert, Living Room, Hall,  
Bathroom, Cave, Arena and Church.  
Equalizer  
To adjust the equalizer: Off, Rock, Pop, Live, Dance,  
Techno, Classic and Soft.  
SPDIF Type  
To Adjust the SPDIF output: Off, Dolby Digital and PCM.  
AVL(Automatic Volume Control)  
This will reduces the differences in volume level among  
broadcasters.  
SAP Broadcasts Setup  
This TV can receive MTS stereo programs and SAP  
(Secondary Audio Program) that accompanies the stereo  
program; if the station transmits an additional sound  
signal as well as the original one.  
When having selected SAP button on the remote control,  
this TV can only receive the signal when the TV station  
transmits the proper signals.  
Mono sound is automatically received if the broadcast is  
only in Mono; even though Stereo or SAP has been  
selected.  
Select Mono if you want to listen to mono sound during  
stereo/SAP broadcasting. Stereo or SAP can be received  
in a Analog channel.  
1. Use SAP button to select your desired MTS mode in a  
analog signal.  
Each time you press SAP button, Mono, Stereo or SAP  
appear.  
If other languages are available on the digital signal,  
select them with the SAP button.  
2. Press EXIT button to save and return to TV viewing.  
22 TFT-LCD TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Function menu  
Menu Language  
When you start using your set for the first time, you must  
select the language which will be used for displaying menus  
and indications.  
Language  
English  
Short  
Video  
OSD Timeout  
Audio  
OSD Transparency Middle  
1. Press MENU button and then use  
/
button to select  
Screen Mode  
Blue Screen  
DPMS  
Normal  
On  
Channel  
Function menu.  
On  
2. Press / ENTER button and then use  
/
button to  
Function  
Lock  
Time Setup  
Closed Caption  
Default  
select Language.  
3. Press  
/
button to select language.  
English Spanish or French  
Select  
EXIT Back  
/
Function  
OSD Timeout  
1. Press MENU button and then use  
/
button to  
button to  
select Function menu.  
2. Press / ENTER button and then use  
/
select OSD Timeout.  
/
3. Press  
button to select Short, Middle orLong.  
(Short is for 5 seconds; Middle is for 10 seconds;  
Long is for 15seconds)  
OSD Transparency  
1. Press MENU button and then use  
/
button to select  
button to  
the Function menu.  
2. Press / ENTER button and then use  
/
select OSD transparency.  
3. Press  
/
button to selectLow ,Middle or High.  
Screen Mode  
Lets you choose the way an analog picture with a 4:3 aspect  
ratio is displayed on your TV with a 16:9 ratio picture format.  
Note  
Language  
English  
Short  
Video  
OSD Timeout  
Audio  
If a fixed image is displayed on the screen for a long time,  
the image may become permanently burned on the screen  
and remain visible.  
OSD Transparency Middle  
Screen Mode  
Blue Screen  
DPMS  
Normal  
On  
Channel  
On  
Function  
Lock  
1. Press MENU button and then use  
Function menu.  
2. Press / ENTER button and then use  
select Screen Mode.  
/
button to select  
button to  
Time Setup  
Closed Caption  
Default  
/
Select  
EXIT Back  
/
Function  
3. Press  
Cinema.  
/
button to selectNormal, Zoom, Wide or  
Normal  
Choose normal whenyou want toview the picturewith  
4:3 mode .  
Zoom  
Choose Zoom when you want to view the picture without  
any alteration. However, the top and bottom portions  
of the picture will be cropped.  
Owner s Manual 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Function menu  
Wide  
Choose wide when you want to adjust the picture  
horizontally, in a linear proportion to fill the entire screen.  
Cinema  
For letterbox pictures, bars may appear on the top and  
bottom on some programs.  
You can also press ARC button on the remote control to  
select the desired picture format: Normal, Zoom, Wide or  
Cinema.  
Blue Screen  
1. Press MENU button and then use  
/
button to select  
button to  
Function menu.  
2. Press / ENTER button and then use  
/
select Blue Screen.  
3. Press  
/
button to select On or Off.  
DPMS  
PC Power Management. To set On, the set will be in  
standby mode automatically if no signal in 2 minutes; if  
signal input, the set will be on again automatically.  
Note: DPMS is useful only in VGA source.  
Time zone setting  
This function allows you to select your local time zone.  
Broadcasted time information will correct the clock display  
for your local time.  
Time Zone  
Date/Time  
Sleep Timer  
Pacific  
Off  
Video  
Audio  
1. Press MENU button and then use  
/
button to  
select Function menu.  
Channel  
2. Press / ENTER button and then use  
select Time Setup.  
/
/
button to  
Function  
Lock  
3. Press / ENTER button and then use  
select Time Zone.  
button to  
Select  
EXIT Back  
/
Time Setup  
4. Press  
/
button to select your viewing area time zone:  
Eastern, Central, Mountain, Pacific, Alaska or Hawaii .  
Date /Time setting  
Setting the clock is necessary in order to use the various  
timer features ofthe TV. Also, you can checkthe time  
while watching theTV.  
Video  
Auto  
Date  
Time  
On  
1. Press MENU button and then use  
/
button to  
2008/01/01  
11:54 AM  
Audio  
select Function menu.  
2. Press / ENTER button and then use  
select Time Setup.  
/
button to  
Channel  
Timer  
Off  
Function  
Lock  
On Time  
Off Time  
11:54 AM  
12:00 AM  
3. Press or ENTER button and then use  
select Date/Time.  
/
button to  
4. Press / ENTER button and then use  
select On or Off.  
/
button to  
Select  
EXIT Back  
/
Date/Time  
24 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Function menu  
Sleep Timer setting  
The sleep timer automatically shuts off the TV after a  
preset time (from 5 to 240 minutes).  
Time Zone  
Date/Time  
Sleep Timer  
Pacific  
Off  
Video  
1. Press MENU button and then use  
select Function menu.  
2.Press / ENTER button and thenuse  
select Time Setup  
3. Press / ENTER button and then use  
select Sleep Timer.  
/
button to  
button to  
button to  
Audio  
/
Channel  
/
Function  
Lock  
4. Press  
/
button to select the number of minutes.  
Select Off,5Min,10Min, 15Min, 30Min, 45Min,60Min,  
90Min, 120Min, 180Minor 240Min.  
The time begins to count down from the number of  
minutes selected.  
Select  
EXIT Back  
/
Time Setup  
5. To cancel theset sleep timer:Press button to select  
Off.  
You can also press SLEEP button to select quickly the  
sleep timer.  
DTV Caption Style (In DTV mode)  
Language  
English  
Short  
Video  
This allows you to modify how digital captions are displayed  
on your TV. Select from the following options to change the  
visual characteristics of your TV`s digital captioning.  
Customize the DTV/CADTV captions that appear on your  
screen.  
OSD Timeout  
Audio  
OSD Transparency Middle  
Screen Mode  
Blue Screen  
DPMS  
Normal  
On  
Channel  
On  
Function  
Lock  
Time Setup  
Closed Caption  
Default  
1. Press MENU button and thenuse  
/
button to select  
Function menu.  
2. Press / ENTER button and then use  
select Closed Caption .  
/
/
/
button to  
button to  
button to  
Select  
Enter  
EXIT Back  
/
ENTER  
Function  
3. Press / ENTER button and then use  
select DTV Caption Style.  
4. Press / ENTER button and then use  
NTSC Caption  
DTV Caption  
Off  
Off  
Video  
select the Style, Size, etc., press  
customize to your preference.  
Style  
/
button to  
Audio  
DTV Caption Style  
Channel  
Select this option to select the font style of caption display  
according to your own preference.  
Function  
Lock  
Press  
Size  
/
button to selectDefault or Custom.  
Select this option to select the size of caption display  
according to your own preference.  
ENTER  
Select  
EXIT Back  
Enter  
/
Closed Caption  
Press  
/
Text color  
button to select Small, Normal or Large.  
Select this option to select the text color or the opacity of  
the text box of caption display according to your own  
preference.  
Select a colorand one ofthe opacity options.  
Text Opacity  
Specify the opacity for the text color.  
BG Color  
Select a background color.  
BG Opacity  
Select the opacity for the background color.  
Window Color  
Select a window color.  
Window Opacity  
Select the opacity for the window color.  
Style  
Custom  
Normal  
Black  
Solid  
Video  
Size  
Audio  
Text Color  
Text Opacity  
BG Color  
Channel  
Black  
Solid  
BG Opacity  
Function  
Lock  
Window Color  
Window Opacity  
White  
Solid  
Select  
/
EXIT Back  
DTV Caption Style  
Owner s Manual 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Lock Menu  
Parental Control canbe used toblock specific channels, ratings and otherviewing sources.  
The parental control function is used to block program viewing based on the ratings sent by the broadcasting station.  
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program  
and the categories.  
Parental Control rating and categories  
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be  
blocked by TV Rating or Individual Categories. Movies that have been shown at the theaters or direct-to-video  
movies use the Movie Rating System (MPAA) only.  
Ratings for Television programs :  
Parental Guide  
TV-Y  
(All children)  
TV-Y7  
TV-G  
(Children 7 years older)  
(General audience)  
TV-PG  
TV-14  
TV-MA  
(Parental guidance suggested)  
(Parents strongly cautioned)  
(Mature audience only)  
Ratings for Movies previously shown in theaters:  
MPAARating :  
G
(General audience)  
PG  
PG-13  
R
(Parental guidance suggested)  
(Parents strongly cautioned)  
(Restricted)  
NC-17  
X
(No one 17 and under admitted)  
(Adult only)  
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.  
CA Eng Rating  
C
C8+  
Children  
Children eight years and older  
General Programming, suitable for all audiences  
Parental Guidance  
G
PG  
14+  
Viewers 14 years and older  
Adult Programming  
18+  
CA Fren Rating  
G
General  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Not recommended for young children  
Programming may not be suitable for children under the age of 13  
Programming is not suitable for children under the age of 16  
Programmingrestricted to adults  
TV Rating :  
(applies to TV-Y, TV-Y7,TV-G,TV-PG,TV-14, TV-MA)  
A (Age)  
(applies to TV-PG, TV-14)  
D (Dialogue - sexual dialogue)  
(applies to TV-PG, TV-14, TV-MA)  
(applies to TV-PG, TV-14, TV-MA)  
(applies to TV-PG, TV-14, TV-MA)  
(applies to TV-Y7)  
L (Language - adult language)  
S (Sex - sexual situations)  
V (Violence)  
FV (Fantasy Violence)  
26 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Lock Menu  
Lock setup  
Set up blocking schemes to block specific channels, ratings,  
and external viewing sources.  
Video  
Enter Password  
A password is required to gain access to this menu.  
Audio  
1. Press MENU button and thenuse  
Lock menu. Then, press button.  
/
button to select  
Channel  
The TV is set up with the initial password 0-0-0-0 and  
security default password is 9-4-4-3.  
Function  
Lock  
2. Use  
/
or ENTER button to enter the next menu. Once the option  
button to select the desired items, and press  
EXIT Back  
Lock  
is selected, change the settings to your preference.  
Password  
Change the password by inputting a new password twice.  
2
3
4
5
6
7
8
9
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Video  
Channel Block  
Audio  
1. Press MENU button and thenuse  
/
button to select  
Channel  
Lock menu.  
2. Press / ENTER button and then use  
/
button to  
Function  
Lock  
10  
11  
12  
select Channel Block.  
3. Press  
to set.  
/
button to select the item, PressOK button  
ENTER Set  
Select EXIT Back  
/
Channel Block  
Channel Block  
Program Block  
Password  
Video  
Parental Lock  
Audio  
1. Press  
2. Press  
Note  
/
button to selectParental Lock item.  
Clean All  
Channel  
/
button to select On or Off.  
Function  
Lock  
If the Parental Lock is setting as Off, the change of the  
Parental Guide , MPAARating ,CA Eng Rating and CA  
Fren Rating will be no useful.  
ENTER Enter  
Select EXIT Back  
/
Lock  
Parental Guide  
Note  
The Parental control will automatically block certain  
categories that are more restrictive . For example, if  
you block TV-Y category, then all the categories in  
the young adult group will be blocked (TV-Y, TV-Y7,  
TV-G, TV-PG, TV-14 andTV-MA).  
Parental Lock  
Parental Guide  
MPAA Rating  
CA Eng Rating  
CA Fren Rating  
Digital Rating  
Block Unrated  
On  
Video  
Audio  
Channel  
The sub-ratings (D, L, S, V, FV) work together similarly.  
Function  
Lock  
On  
How to set the D, L, S, V and FV sub-ratings.  
First, press  
TV-Y, TV-Y7,TV-G, TV-PG,TV-14,or TV-MA, and press  
button.  
/
button select one of these Ratings:  
ENTER Enter  
Select EXIT Back  
/
Program Block  
/
Owner s Manual 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Lock Menu  
Lock setup  
A symbol  
While  
will be displayed for each sub-rating.  
is selected, pressENTER button to go to a sub  
A
D
L
S
V
FV  
Video  
TV-Y  
rating. To select adifferent Rating, press  
and then repeat the process.  
Note  
/
buttons  
TV-Y7  
TV-G  
Audio  
TV-PG  
TV-14  
TV-MA  
Channel  
The V-chip will automatically block certain categories  
that are More restrictive .For example, ifyou block  
Function  
Lock  
Allowed Rating  
Blocked Rating  
sub-rating in TV-PG, then the  
sub-ratings in  
TV-14 and TV-MA will automatically be blocked.  
ENTER Set  
Select EXIT Back  
/
Parental Guide  
MPAA Rating  
Blocks movies according to the movie ratings limits  
specified, so children cannot view certain movies. You  
can set the ratings limit by blocking out all the movies with  
the ratings above a specified level. Keep in mind that the  
movie ratings limit only applies to movies shown on TV,  
not TV programs, such as soap operas.  
Video  
G
PG  
PG-13  
R
Audio  
Channel  
NC-17  
X
Function  
Lock  
Allowed Rating  
Blocked Rating  
1. Press  
/
button to select MPAA Rating item.  
2. Press / ENTER button and then use  
/
button to  
select the rating.  
ENTER Set  
Select EXIT Back  
/
MPAA Rating  
3. Press ENTER button to set block or unblock.  
CA Eng Rating  
Video  
Canadian English LanguageRating  
C
C8+  
G
Audio  
1. Press  
/
button to selectCA Eng Rating item.  
2. Press / ENTER button and then use  
select the rating.  
/
button to  
PG  
14+  
18+  
Channel  
3. Press ENTER button to confirm.  
Function  
Lock  
Allowed Rating  
Blocked Rating  
ENTER Set  
Select EXIT Back  
/
CA Eng Rating  
CA Fren Rating  
Canadian French LanguageRating  
Video  
G
1. Press  
/
button to selectCA Fren Rating item.  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Audio  
2. Press / ENTER button and then use  
select the rating.  
/
button to  
Channel  
3. Press ENTER button to confirm.  
Function  
Lock  
Allowed Rating  
Blocked Rating  
Set  
Select EXIT Back  
/
ENTER  
CA Fren Rating  
28 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Other Functions  
Brief Info  
Brief Info shows the present screen information.  
Press DISPLAY button to show the Brief Info on the screen.  
Press DISPLAY button or EXIT button to exit.  
Function:  
Show the present screen information.  
Press DISPLAY button or EXIT button to exit.  
A: Video resolution  
B: Program name  
C: Program rating categories  
D: program showtime  
E: Program title  
F: Channel Lable  
G:Tuner mode  
H:Program details  
Using the Guide  
The guide allows you to select the channels from a channel  
list.  
The guide allows provides information about the current  
program being shown on each channel(if information is  
available from thestation).  
Note  
Program information in the guide is provided by the  
broadcasters. As a result, it may sometimes include only  
the channel number, without a program title or description.  
A: Program title  
B: program options  
C: program showtime  
D: Program details  
E: Program rating categories  
Owner s Manual 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Other Functions  
Quick program view  
Press to jump back and forth between two channels. The TV  
alternates between the current channel and the last channel that  
was selected.  
1. Suppose the channel number you used just now is 8 and the  
channel number youare using is18 (as shownin the figure).  
2. If you want to return to the last watched program channel 8,  
you can simplypress RECALL button.  
3. If you want to return to channel 18, press the button again.  
CC (Closed Caption Display)  
Closed Captions  
Note  
The captions do not always use correct spelling  
and grammar. Not all TV programs and product  
commercials are made for broadcast with Closed  
Caption information included. Refer to your area`s  
TV program listings for the TV channels and times  
of Closed Caption shows. The captioned programs  
are usually noted in the TV listings with service  
Closed captioning is a process which converts the audio  
portion of atelevision program intowritten words which  
then appear as subtitles on the television screen. Closed  
captions allow viewers to read the dialogue and narration  
of television programs.  
Using Closed Captions  
Captions are the subtitles of the dialogue and narration of  
television programs. For prerecorded programs, program  
dialogue can bearranged into captionsin advance. Its  
possible to caption a live program by using a process called  
real-time captioning, whichcreates captions instantly.  
Real-time captioning is normally done by professional  
reporters using a machine shorthand system and computer  
for translation intoEnglish. Captioning isan effective  
system for the hearing-impaired, and it can also aid in  
teaching language skills.  
marks such as CC  
.
In ATV mode CCD function allows you to configure the way  
you choose to view the digital captioning (Off, CC1, CC2,  
CC3, CC4, Text1, Text2, Text3 or Text4).  
CAPTION  
The term for the words that scroll across the bottom of the  
TV screen; usually the audio portion of the program  
provided for the hearing impaired.  
TEXT  
The term for the words that appear in a large black frame  
and almost cover the entire screen; usually messages  
provided by the broadcaster.  
In DTV mode allows you toconfigure the wayyou choose  
to view the digital captioning(Off,service1,service2,  
service3,service4, service5 orservice6).  
Select one of the digital service channels made available  
by the caption provider.  
There are 6 standard services. Service 1 is designated as  
the Primary Caption Service. This service contains the  
verbatim, or near-verbatimcaptions for theprimary  
language being spoken in the accompanying program audio.  
Service 2 is designated as the Secondary Language Service.  
This service contains captions in a secondary language  
which are translations of the captions in the primary Caption  
Service. The other service subchannels are not  
pre-assigned. It is up to the discretion of the individual  
caption provider toutilize the remainingservice channels.  
30 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
USB Input  
4.Press the button on the remote control to select the  
item, press ENTER button to confirm.  
1.Supporting media andfile format: Digitalpictures (.JPG)  
and digitalmusic (.MP3)files  
Due to differences in the file code and file mode, It is  
possible that some files cannot be read.  
2.Before starting operation, verify USB storage device  
is of FAT32 and FAT file system format. At present, this  
television does not support NTFS and the file systems  
of other format.  
1.Play or pause  
2.Stop;  
3.Repeat  
4.No available  
5.No available  
6.Play previous picture;  
7.Play next picture;  
3
2
1
PLAY/PAUSE STOP  
PREV  
REPEAT  
NEXT  
REV  
7
5
6
4
3.External card reader supports most digital cards  
available in the market. Readable digital cards are  
classified according to the property of card readers and  
can be connected to mobile hard disks (working voltage  
5.0V, working current not over 500mA).  
5.Press EXIT button to return to the previous menu.  
Press USB button to exit the USB mode.  
Note you may play the pictures among selected.  
4.The television operation may be halted due to  
excessive rate of information code errors. In such case,  
restart the system. Please note - there are many  
nonstandard USB mobile devices in the market. If a  
nonstandard device is used then an identification  
problem may occur.  
To play music  
1.Press  
Press ENTER to enter.  
/
button to selectMusic option.  
To play picture  
1.Press USB button on the remote to enter stream media  
system.  
The system start up takes about 3second. Then insert  
the USB drivein the USBinput.  
2.Press  
/
/
/
then press ENTER button to enter the play interface.  
button to select desired music, and  
2.Press  
/
Press ENTER to enter.  
button to select Picture option.  
3.Press the button on the remote control to select the  
adjusted item, pressENTER button to confirm.  
1.Play or pause  
2.Stop;  
3.Repeat  
4.Fast reverse  
5.Fast forward  
6.Play previous music;  
7.Play next music;  
3
2
1
PLAY/PAUSE STOP  
PREV  
REPEAT  
NEXT  
REV  
7
5
6
4
3.Press  
then press ENTER button to enter the play interface.  
/
/
/
button to select desired picture, and  
4.Press EXIT button to return to the previous menu.  
Press USB button to exit the USB mode.  
2
3
1
Note You may play the music among selected.  
5
6
7
4
1.Play mode: None/Dissolve/Wiperight/Wipe left/Wipe up/Wipedown/Box in/Box out  
2.Play time: Short/Medium/Long;3.Filename 4.Pause/Play  
5. Duration/Rotate 6.Effect7.Infomation  
Owner s Manual 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
USB Input  
To play pictures and music together  
Insert USB drive with music and picture files in to the USB  
input , select the Music folder and choose the MP3 files  
to be played. Then select the pictures to be played.  
Please note as some files must be read while music is  
being played, the speed of picture operation response  
might be affected.  
1.Press  
/
Press ENTER to enter.  
button to select Music folder.  
2.Press  
/
then press ENTER button to enter to play.  
/
/
button to select the desired music, and  
3.Press EXIT button to turn to the main menu. And then  
press  
Press ENTER to enter.  
/
button to select Picture option.  
4.Press  
/
then press ENTER button to enter the play interface.  
/
/
button to select desired picture, and  
5.Press USB button to exit USB mode.  
Note Do not remove USB device from the TV until you  
have exited the USB mode otherwise you may  
damage the USB device.  
32 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Setting Up Your Remote Control  
Manually scan mode  
After it has been set up properly, your remote control can  
operate in sixdifferent modes: TV, DVD, VCR, SETBOX,  
CABLE or AUDIO.  
Note  
The remote controlmight not becompatible with allDVD  
Players, VCRs andCable boxes.  
With manually scanprogramming, the Controllertests  
all the codes available in the codeset database and  
assign the correct one for the selected device. Although  
this method is more time consuming, it saves you the  
trouble of looking up the brand codes necessary for  
manual programming.  
To manually-scan program theController:  
1. Manually turn OFF the device for manually scan mode.  
(TV, VCR, DVD, STB, cable boxor audio equipment).  
2. Choose thedevice you wantto program.  
3.While Press and holding ENTER key, press INPUT key,  
and device LED will be ON. Keep the status for about 3  
seconds and the LED will blink, indicating that the  
Control is readyfor programming, thenrelease both  
keys.  
4.Press and release the CH+/CH- key. it will emitthe next  
or the previous POWER key code. The LED blinkswith  
10HZ freq, indicating that the Remote is in manually  
scan mode.  
Control Operation  
1.Program the Controller to work with your device.  
2.Changing device modeby pressing theTV DVD  
STB CABLE VCR AUD key. When deviceis set,  
related device LED will be on for 1 second and then be  
off.  
3. Aim the remote at the device.  
4. Use the other Controller buttons to operate the device.  
Device LED will blink if user presses any key (if the key  
has data in current mode.). If the key has no data, then  
LED will notblink.  
5.Press CH+/CH- keyrepeatedly until thedevice  
switches ON(CH+ key conducts a upward search while  
the CH- key conducts a downward search in the code  
set database). When the device turns ON, press and  
release the ENTERkey to programthe Controller with  
the new code, saving the codeto EEPROM andexit.  
6. After saving the new code, press POWER key. If the  
device responds, no further programming is required.  
If the device does not respond, repeat step 3 through 5.  
And searchingwill start fromcurrent code set.  
To exit without programming, press any key or no key was  
pressed in 30 second, manually scan mode will be  
automatically exit. The code cannot be savedto  
EEPROM.  
After searching the entire data base, this mode will be  
automatically exited andled will blink for 3 timesin 1.5  
seconds. The code can notbe saved toEEPROM.  
Automatic Scan Programming the Controller  
To automatic scan programthe Controller:  
1.Manually turn OFF the device you wish to power scan.  
(TV, VCR, DVD,STB, cable box oraudio equipment).  
2. choose thedevice you wishto program.  
5. Default initstatus: TV/Haier codeset.  
Manually Programming theControl  
Check the codeno. from thecode list.  
1. Choose thedevice you wantto program.  
2. While Press and holding ENTER key, press INPUT  
key, and device LED will be ON. Keep the status for  
about 3 seconds and the LED will blink, indicating  
that the Controller is ready for programming, then  
release both keys.  
3.Led will blink once when you enter a digit key,  
indicating the digitkey is programmed. If 3 digits are  
programmed successfully, device LED will be ON for  
about 3 seconds and then blink twice per second.  
Then User now can:  
a)Try to operate the device by using power key.  
B)If operation canbe done, pressENTER key tosave  
current 3-digits code brand to EEPROM and exiting  
manually programming mode.  
C)Return to beginning of step 3. Reprogram the  
control.  
4. If user's input is incorrect, LED will blink 6 times in 3  
seconds (2HZ). And then keep 2HZ blink, user now can  
return to step 3 and re-program the device.  
Within 30 seconds, user should enter the 3-digit brand  
code corresponding to your device. If time out or any  
key other than Power and digits is pressed, LED will be  
off and manually programming processis exit.  
3. While Press and holding ENTER key, press the INPUT  
key and device LED will be ON. Keep the status for  
about 3 seconds and the LED will blink, indicating that  
the Controller isready for programming, then release  
both keys.  
4.Press and release the Mute key to enter automatic scan  
mode. And the remote will automatically sending codes  
to the device per 2seconds.  
5.When the deviceturns ON, pressENTER key to  
program the Controllerwith the newcode, saving itto  
EEPROM and exit.  
6.Press POWER key, If the device responds, no further  
programming is required. If the device does not  
respond repeat steps 1 through 5.  
7.After searching the entire data base, this mode will be  
automatically exited and led will blink for 3 times. The  
codeset is notsaved to EEPROM.  
In automatic scanmode, press anykey other thanENTER  
key will exitwithout programming,.  
Owner s Manual 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Display mode  
1. choose the device you wish to program.  
2.To enter display mode, while press and holding ENTER  
key, press the INPUT key and device LED will be ON,  
keep the status for about 3 seconds and the LED will  
blink, indicating that the Controller is ready for  
programming, then release both keys.  
3. Sequence press 9, 8, 0 to enter display mode.  
4.Press digit 1 key to get the first digit of current codeset.  
For example, if the first digit of codeset is 1, so then led  
will blink once and remains OFF. Digit “0” in codeset  
will not be displayed. Blink Freq is 1HZ.  
5.Press digit 2 key to get the second digit of current  
codeset. For example, if the second digit of codeset  
is 3, so then led will blink three times and remains OFF.  
Blink Freq is 1 HZ.  
6.Press digit 3 key to get the third digit of current codeset.  
Blink Freq is 1 HZ.  
7. Only digit 1, 2, 3 are valid in this mode. And the  
sequence is not fixed.  
Controller will not send out data in this mode if user  
presses any keys other than digit 1, 2, 3, or no key was  
pressed in 30 seconds, display mode is ended.  
Punch-Through Features  
The Controller provides two punch-through features that  
allow users to control TV volume and DVD or VCR  
operation while the Controller is in another device mode  
control certain features of another device.  
Volume Punch-Through  
The TV Volume/Mute punch-through feature allows you  
to control the volume and mute function of your TV while  
the Controller is in another device mode. The feature is  
applicable for all devices and brands that do not use the  
volume control buttons for other purposes.  
Transport Key Punch-Through  
The DVD or VCR transport key punch through feature lets  
you control the PLAY, STOP, PAUSE, REWIND, FF and  
RECORD functions of your DVD or VCR while the Control  
operates in other modes. The feature is applicable for all  
devices and brands that do not use the transport keys for  
other purposes.  
Fast Programming Haier default TV  
codeset  
Press and holding the ENTER key and then press POWER  
key for 3 seconds, the LED will blink 3 times and turn off,  
default Haier codeset (001) will be programmed to the  
control.  
34 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Remote Control Codes  
TV  
NO. Brand  
Code  
NO. Brand  
Code  
001 002 003 004 005 006 007 008 009 010 240 241 297 307 355  
1
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Envision  
Epson  
060 062 222 331 350  
Haier  
2
077  
225  
Abex  
3
267  
Erres  
347  
Acer  
4
333  
ESA  
053  
Addison  
Admiral  
Advent  
5
057 078 334 338  
Ether  
362  
6
324  
Firstar  
372  
7
079  
Fujitsu  
068 216  
053 067 068 335  
368  
Adventura  
Aiko  
8
066 333  
Funai  
9
165  
Furi  
Aiwa  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
038 058 258 271 279 331 350  
Futuretech  
Gateway  
GE  
067 335  
243 274 341 360  
Akai  
321 325  
Albatron  
Alleron  
068  
027 056 059 060 062 069 070 085 088 107 116 332 337 378  
335  
GFM  
051 305  
America Action  
Ampro  
323  
Gibralter  
Go Video  
Goldstar  
Gradiente  
Grundig  
Grunpy  
Hallmark  
Hankook  
Harman/Kardon  
031 060 330 331 349 350  
067  
328  
Amtron  
Anam  
335  
060 061 062 065 076 077 331 349 350 379  
059 067  
242  
Anam National  
AOC  
060 061 062 222 331 349 350 353  
351  
Apex  
092 135 151 195 339  
067 068 335  
Archos  
308  
060 062  
Astar  
259  
335 362 371  
Audiovox  
Aventura  
Axion  
067 189 191 207 256 333 335 337  
055  
100 Harvard  
101 Havermy  
102 Hello Kitty  
103 Hewlett Packard  
104 Hisense  
105 Hitachi  
106 HP  
053  
067 335  
280  
334  
Bang & Olufsen  
Baur  
345 346  
337  
058  
175 204 219  
Belcor  
060 349  
250 370 375  
Bell & Howell  
Benq  
057  
032 060 062 065 126 127 134 149 150 186 200 340  
245 246 284 329  
204 219  
107 Hyundai  
108 Ilo  
Bradford  
Brillian  
067 335  
327  
342  
174 254 266 312  
109 IMA  
Brockwood  
Broksonic  
byd:sign  
Candle  
060 349  
067  
110 Infinity  
111 InFocus  
112 Initial  
197 335 338  
055 071 320  
310  
275  
060 062 063 079 331 350  
277  
113 Innova  
114 Insignia  
115 Inteq  
Carnivale  
Carver  
331 350  
351  
055 320  
097 237 298 299 300 306 313  
CCE  
239 351  
330  
116 Janeil  
117 JBL  
Celebrity  
Celera  
058  
079  
339  
055 071 320  
118 JC Penney  
119 JCB  
Centurion  
Changhong  
Ching Tai  
Chun Yun  
Chung Hsin  
Citizen  
064  
056 060 061 062 063 069 070 074 076 077 088  
339  
058  
120 Jean  
333  
333 363 370 372  
121 Jensen  
122 Jinxing  
123 JVC  
333 335 361 374  
060 062 236  
335 364  
365 368 370  
060 062 063 066 067 074 076 331 333 350 352 354 380  
047 048 049 065 070 114 154 172 199 201  
124 Kawasho  
125 Kaypani  
126 KEC  
Clarion  
335  
058 060 062  
Coby  
210  
353  
Colortyme  
Colt  
060 062  
377  
335  
127 Kenwood  
128 Kioto  
060 062 331 349 350  
Commercial Solutions332  
055  
129 KLH  
Concerto  
Contec  
060 062  
339  
130 Kloss Novabeam  
131 Kolin  
335  
067 079  
Contec/Cony  
Craig  
065 067  
335 369  
132 KTV  
067 335  
067 076 331 335 350 352  
133 LG  
Crosley  
055 293 320  
030 060 061 182 224 257 302 321 350  
134 Loewe  
135 Logik  
Crown  
067 071 335 352  
071  
CTX  
235  
057  
136 Luxman  
137 LXI  
Curtis Mathes  
CXC  
038 055 056 060 062 074 076 088 320 331 332 334 337 340 350 352 354  
060 062  
067 335  
055 056 062 071 088 151 320 332  
138 M & S  
139 Magnasonic  
140 Magnavox  
Cytron  
238 278  
055  
Daewoo  
Daytron  
Dell  
060 061 062 066 076 093 117 125 152 333 337 349 352 380  
380  
060 062 076 349  
052 055 060 062 063 071 090 105 108 110 163 174 176 218 320  
251 285 304  
331 350  
141 Magnin  
142 Majestic  
143 Marantz  
144 Matsushita  
145 Maxent  
146 Mediator  
147 Megapower  
148 Megatron  
149 Memorex  
150 MGA  
Denon  
340  
378  
DiamondVision  
Dimensia  
Disney  
311 317 319  
057  
056 088  
055 060 062 071 231 272 320 331 350 351  
132  
336  
Dumont  
Durabrand  
Dwin  
031 060 330 349  
243 252 301  
053 097 137 341 335 338  
374  
322 334  
321  
Electroband  
Electrograph  
Electrohome  
Element  
Emerson  
Emprex  
058  
062 340  
243  
057 061 062 137 181 338 376 379  
060 061 062 331 349 350 378  
031 070 076 077 330 332 352  
174  
058 059 060 062  
151 Midland  
152 Mintek  
228  
053 060 062 065 067 068 076 093 137 266 292 335 338 349 352 380  
314  
153 Minutz  
069  
154 Mitsubishi  
060 061 062 119 159 170 334 349  
Owner s Manual 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Remote Control Codes  
NO. Brand  
Code  
NO. Brand  
Code  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
171  
172  
173  
174  
175  
176  
177  
178  
351  
335  
Monivision  
321 325  
226  
227  
228  
SKY  
Montgomery Ward 057  
Skygiant  
Sony  
011 012 013 014 015 016 058 087 094 101 102 118 124 128 136  
Motorola  
MTC  
059 078 334  
148 153 184 206 226 287 288  
060 061 062 074 331 349 350 354  
060 062 063 067 068 335  
Multitech  
Multivision  
NAD  
229  
230  
231  
232  
233  
234  
235  
236  
237  
238  
239  
067 335  
Soundesign  
Sowa  
366 370  
072  
053 080  
062 151 351  
Squareview  
SSS  
060 067 335 349  
NEC  
059 060 061 062 234 268 331 349 350  
067 335  
Netsat  
351  
Starlite  
325  
NET-TV  
Newave  
Nikko  
243 247  
Studio Experience  
Superscan  
Supre-Macy  
Supreme  
SVA  
052 260 334 356  
333 367 371  
079  
062 066 331 333 350  
058  
Norcent  
Noshi  
222  
230 355  
348  
046 050 051 052 053 054 055 060 062 063 071 137 141 161 289  
NTC  
066 333  
Sylvania  
320 331 350  
Olevia  
138 192 221 357 358  
053 067 080 141 335  
Onwa  
240  
241  
242  
243  
244  
245  
246  
247  
248  
249  
250  
251  
067 335  
Symphonic  
Synco  
333 337 361 366 367 371  
Oppo  
282  
138 192 344 357 358  
Optimus  
Optoma  
Optonica  
Orion  
336 376  
Syntax  
192 244  
276  
Syntax-Brillian  
Tacico  
333 371  
073 078 334  
078 334  
097 338  
Tandy  
059 253 273 341 360 363 366 370  
Otto Versand  
Panasonic  
058  
Tatung  
070 336  
021 022 023 024 025 026 059 070 071 086 103 122 144 147 155 168 183  
Technics  
Techview  
Techwood  
Teco  
326  
185 336 376  
179  
180  
181  
060 062 070  
Penney  
Philco  
151 331 332 348 349 350 352 354 378 379  
363 367 371  
055 059 060 061 062 063 065 071 181 320 331 349 350  
055 057 060 061 062 063 065 066 067 068 074 076 320 333 335  
Philips  
040 041 042 043 044 045 046 055 059 060 063 065 071 089 090 091 096  
Teknika  
349 352 354  
160 162 164 169 174 177 179 190 208 291 320 347 351  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
Telecaption  
Telefunken  
Thomson  
TMK  
075  
Philips Magnavox  
Phonola  
Pilot  
252  
253  
254  
255  
256  
257  
042 045 089 090 096  
038  
347  
088  
060 076 331 349 350 352  
060 062  
Pioneer  
Plasmsync  
Polaroid  
Portland  
Price Club  
Prima  
060 062 156 157 205 212  
TNCi  
330  
269  
Toshiba  
017 018 019 020 074 075 099 100 104 106 109 111 113 115 120  
211 217 220 228 315 339  
123 146 151 173 227 354  
060 061 062 066 076 333 349 352  
Totevision  
Trutech  
076 352  
258  
259  
260  
261  
262  
263  
264  
265  
266  
267  
268  
269  
270  
271  
272  
273  
274  
275  
276  
277  
278  
074  
248  
281 324  
Tuntex  
333 362  
Princeton  
Prism  
321  
TVS  
338  
070  
Universal  
Vector Research  
Victor  
069  
Proscan  
Proton  
027 056 088 332  
331 350  
060 062 065 353  
065  
Protron  
196 262  
Vidikron  
Vidtech  
055 320  
Proview  
Pulsar  
263 343  
060 061 062 349  
031 060 330 349  
Viewsonic  
Viking  
133 214 218 223 233 243 316 356  
Pye  
347  
079  
Quasar  
022 059 070 336 376  
Viore  
254  
Quelle  
058  
Visco  
309  
Radio Shack/Realistic  
056 060 062 065 067 073 076 077  
Vizio  
133 257 261 296 318 341 356 359 360  
Radiola  
347  
Wards  
055 056 057 060 061 062 068 069 071 073 088 320 331 349 350  
Radio Shack  
RCA  
088 331 332 335 349 350 352  
Waycon  
Westinghouse  
White Westinghouse  
Yamaha  
Yapshe  
151  
027 028 029 056 059 060 061 062 082 088 095 098 332 348 349 354 378  
133 187 188 195 215 290 303 337  
Realistic  
Runco  
088 331 335 349 350 352  
093 338  
031 330 331 350  
060 061 062 331 349 350  
Sampo  
060 062 076 077 243 283 331 350 352 353  
373  
Samsung  
037 038 039 060 061 062 065 074 076 077 129 130 140 143 158 166  
Zenith  
030 031 032 057 060 081 084 093 121 330 333 338  
178 193 194 209 213 229 232 286 294 295 331 349 350 351 354  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
Samsux  
Sansui  
Sanyo  
SBR  
352  
097 338  
060 249 270 378  
347  
Sceptre  
Scimitsu  
Scotch  
Scott  
264  
349  
062  
060 062 065 067 068 255 335 349  
Sears  
SEI  
053 055 056 060 062 068 080 088 151 244 320 332 379  
058  
Sharp  
033 034 035 036 060 062 065 073 076 078 083 112 131 139 142 145 167  
171 180 198 202 203 334 352  
220  
221  
222  
223  
224  
225  
Shen Ying  
Sheng Chia  
Shogun  
333  
334 367  
060 349  
057  
Signature  
Simpson  
Sinudyne  
063  
058  
36 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Remote Control Codes  
DVD  
NO. Brand  
Code  
NO. Brand  
Code  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Lenoxx  
333 353  
Lexicon  
LG  
357  
1
Accele Vision  
250  
2
Accurian  
Advent  
102 151 165 185 189 201 211 242 256 283 345 349  
355  
Liquid Video  
Liteon  
334  
3
330  
4
Aiwa  
158 219 355 384  
307  
Loewe  
356 365  
5
Akai  
280 323 361  
Magnavox  
Marantz  
Memorex  
Microsoft  
Mintek  
068 071 124 156 179 213 298 324 336 339 354  
6
Alco  
328  
7
Allegro  
245 301 302 339  
349  
8
Alpine  
100 133 323  
257  
9
Amphion MediaWorks  
AMW  
338  
258  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
213 278 343  
258  
Mitsubishi  
NAD  
106 177 190 337  
Apex  
025 026 027 028 078 117 172 192 342 343  
264  
Apple  
319  
Nakamichi  
Nesa  
310  
Arrgo  
351  
Aspire  
343  
332  
Next Base  
Nexxtech  
363  
Astar  
252  
Audiovox  
Axion  
271  
164 167 223 328  
100 Norcent  
101 Onkyo  
102 Oppo  
129 246  
281  
Bang & Olufsen  
Blaupunkt  
Blue Parade  
BOSE  
145 188 197 206 207 326 336  
344  
273 284  
327 334  
249 343  
103 Oritron  
104 Panasonic  
340  
017 018 019 020 021 022 023 024 051 059 067 070 072 073 077  
062 079  
BOSS  
080 083 091 099 135 138 160 181 183 184 199 205 233 234 235  
251  
Boston Acoustics  
Broksonic  
California Audio Labs  
CambridgeSoundWorks  
Changhong  
CineVision  
Clarion  
325 336 387 388  
381  
105 Philco  
106 Philips  
328  
123 323  
007 041 042 071 098 137 144 152 157 168 174 176 178 208 213  
325  
336 339 357 385  
290  
107 Pioneer  
108 Polaroid  
109 Polk Audio  
110 Portland  
111 Presidian  
112 Prima  
043 044 045 046 047 058 110 150 200 229 247 340 390  
326 375  
028 241 277  
196 349 350  
339  
262  
Classic  
361  
236  
Coby  
385  
082 129 143 237 331  
Curtis  
282 383  
129  
113 Princeton  
114 Proceed  
115 Proscan  
116 Pye  
Curtis Mathes  
CyberHome  
Cytron  
358  
352  
342  
029 048 351 368 373 374 377  
069 338  
279  
Daewoo  
Denon  
276  
113 349 361  
117 Qwestar  
118 RCA  
327  
070 182 198 209 299 300 325  
Desay  
039 040 069 090 166 191 328 338 340 343  
268  
119 Regent  
120 Rio  
DiamondVision  
Disney  
333  
320 321 322  
349  
100 132  
121 Rotel  
Dual  
341  
312  
122 Rowa  
Durabrand  
DVD2000  
Eclipse  
329  
353  
123 Sampo  
124 Samsung  
119 265 370 372  
337  
012 013 014 015 016 054 064 066 074 075 085 104 105 108 111  
227  
Emerson  
Enterprise  
ESA  
121 125 134 154 193 210 226 325 389  
063 248 324 345 385  
125 Sansui  
228 275 323  
345  
126 Sanyo  
287 323 346  
259 354  
127 Sensory Science  
128 Sharp  
Fisher  
384  
305 346  
Funai  
093 119 187 202 220 291 295 296 297  
354 385  
129 Sharper Image  
130 Sherwood  
131 Shinco  
Gateway  
GE  
368  
376 378 384  
292 361  
101 195 338 343  
GFM  
260  
204  
132 Shinsonic  
133 Sigma Designs  
134 Sonic Blue  
135 Sony  
Go Video  
Goldstar  
GPX  
213 335  
118 349 382 384  
358  
120  
349  
194  
Gradiente  
Greenhill  
Grundig  
Haier  
000 001 002 003 004 005 006 049 052 055 056 057 060 061 065  
270 325  
076 081 092 094 097 109 112 114 126 127 128 146 147 148 155  
343  
230 231 232 316 317 318 335  
339  
136 Sungale  
137 Superscan  
138 SVA  
267  
334  
Harman/Kardon  
Hitachi  
124 324  
224 347  
364  
014 136 203 244  
139 Sylvania  
140 Symphonic  
141 Teac  
Hiteker  
042 063 124 133 159 204 225 285 324 354 385 386  
342  
iLive  
133 159 385  
293  
Ilo  
266 328 371 379 380  
213  
142 Technics  
143 Techwood  
144 Terapin  
145 Theta Digital  
146 Toshiba  
iLuv  
325  
314  
Initial  
261  
278 343  
Insignia  
Integra  
366  
274 289 298 303 354  
340  
326 340  
Irradio  
007 008 009 010 011 050 053 084 088 089 096 107 130 131 140  
174  
iSymphony  
Jamo  
163 169 170 171 175 186 212 215 216 217 221 238 239 240 254  
294  
255 323 336  
308  
147 Tredex  
JBL  
362  
162 347  
148 Trutech  
149 Tview  
Jensen  
296  
311 331  
JVC  
313  
030 031 032 033 034 035 036 037 038 086 087 095 103 122 141  
150 Urban Concepts  
151 US Logic  
152 Venturer  
153 Vizio  
336  
142 161 173 214 218 243 306 341  
Jwin  
75  
76  
77  
78  
79  
80  
81  
82  
213  
309  
Kawasaki  
Kenwood  
KLH  
288 328  
328  
367 369  
325  
154 Vocopro  
155 Westinghouse  
156 Xbox  
315  
115 272 328 343  
359 360  
153 286 327 334  
363  
Konka  
Koss  
222  
338  
Landel  
Lasonic  
157 Yamaha  
158 Zenith  
180 253 325 339  
102 116 120 139 149 336 345 349  
263 348  
Owner s Manual 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
NO. Brand  
Code  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Memorex  
MGA  
008 012 025 028 029 030 031 032 100 108 112 114 117 120  
Remote Control Codes  
VCR  
010 012 119  
MGN Technology  
Microsoft  
Mind  
012 029  
111  
111  
NO. Brand  
Code  
Minolta  
013  
Mitsubishi  
Motorola  
MTC  
010 041  
1
ABS  
111  
031  
2
Adventura  
Aiwa  
008 032  
008 012 029  
3
008 032 095 112  
Multitech  
NEC  
008 029 032  
4
Akai  
019  
016 028  
5
Alienware  
American High  
Apex  
111  
Nikko  
030 112  
6
031  
Niveus Media  
Noblex  
111  
7
115  
012 029  
8
Asha  
012 029  
Northgate  
111  
9
Audio Dynamics  
Audiovox  
Bang & Olufsen  
Beaumark  
Bell & Howell  
Broksonic  
Calix  
016  
100 Olympus  
101 Optimus  
102 Optonica  
103 Orion  
031  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
030 082 112  
020 030 112 117  
113  
023  
012 029  
045 108  
028  
104 Panasonic  
105 Penney  
106 Pentax  
107 Philco  
000 001 002 003 031 035 037 056 063 079 089 098 109 117 128  
074 099 114  
012 013 112 119 120  
030 112  
013  
Candle  
029 030  
031  
Canon  
031  
108 Philips  
023 031 044 071 087 110 116 122 124 125 126  
CineVision  
Citizen  
094  
109 Philips Magnavox  
110 Pilot  
044  
029 030 112 121  
030 112  
Colortyme  
Colt  
016  
111 Polaroid  
112 Presidian  
113 Profitronic  
114 Proscan  
115 Pulsar  
104 115  
118  
116  
Craig  
012 029 030 112  
012  
Curtis Mathes  
Cybernex  
Cyperpower  
Daewoo  
Davidson  
DBX  
016 029 031  
069 070 134  
012 029  
025  
111  
116 Pye  
103  
018 032 051 093 121  
117 Quarter  
118 Quartz  
028  
008  
028  
016  
119 Quasar  
120 Radio Shack  
121 Radio Shack/Realistic  
122 Radix  
031 076 117  
Dell  
111  
008 023 030  
Denon  
013  
023 028 029 030 031 032  
DiamondVision  
DIRECTV  
Dishpro  
107  
030 112  
110 122 124 125 129 130 134 136  
123 Randex  
124 RCA  
030 112  
133  
011 012 013 029 031 034 058 067 097 110 119 122 124 134 136  
Durabrand  
Dynatech  
Echostar  
Electrohome  
Electrophonic  
Emerson  
ESA  
025  
125 Realistic  
126 ReplayTV  
127 Ricavision  
128 Runco  
008 023 028 029 030 031 032 112  
008 032  
109 127  
133  
111  
010 030 112  
025  
030 112  
129 Samsung  
130 Sanky  
012 017 018 019 029 043 049 050 068 080 110 124  
008 010 020 030 031 032 105 112 116 121  
025  
101  
131 Sansui  
132 Sanyo  
008 045 102 108 114  
Expressvu  
Fisher  
133  
012 028 029 073 119  
028 073  
133 Scott  
010 018  
Fuji  
031  
134 Sears  
008 013 028 030 031 112 120  
Funai  
008 020 032 105 116  
135 Sharp  
022 023 052 090 096  
Garrard  
008 032  
136 Shogun  
137 Singer  
012 029  
Gateway  
GE  
111  
031  
012 029 031 055 119  
138 Sonic Blue  
139 Sony  
109 127  
Go Video  
GOI  
012 072  
004 005 006 007 008 033 036 038 039 046 064 065 066 075 111  
133  
123 131 135  
Goldstar  
Gradiente  
Harley Davidson  
Harman/Kardon  
Headquarter  
Hewlett Packard  
Hitachi  
016 030 106 112 120  
140 Stack  
111  
008 032  
141 STS  
013 031  
032  
142 Superscan  
143 Sylvania  
144 Symphonic  
145 Systemax  
146 Tagar Systems  
147 Tandy  
021  
016  
008 010 020 021 031 032 048 062 088 116  
028  
008 020 021 032 105 116  
111  
111  
008 013 048  
111  
HNS  
110  
028  
Howard Computers  
HP  
111  
148 Tashiko  
149 Teac  
030  
111  
008 032  
HTS  
133  
150 Technics  
151 Teknika  
152 Thomas  
153 Tivo  
031  
Hughes Network Systems  
Humax  
013 110 122 124 125 130  
008 030 031 032 112  
110 122  
008  
Hush  
111  
110 122 123 124 126 130 131 135  
iBUYPOWER  
Insignia  
111  
154 TMK  
012 029  
081  
155 Toshiba  
156 Totevision  
157 Touch  
009 010 018 042 047 053 054 057 061 077 111 132  
Instant Replay  
JC Penney  
JCL  
031  
012 029 030 112  
016 028 029 030 031  
111  
031  
158 UltimateTV  
159 Unitech  
136  
JVC  
014 015 016 028 040 059 060 083 084 085 086 122 133  
012 029  
KEC  
112  
160 Vector  
018  
Kenwood  
Kodak  
016 028  
161 Vector Research  
162 Video Concepts  
163 Videomagic  
164 Videosonic  
165 Viewsonic  
166 Villain  
016  
030 031 112  
016 018  
LG  
030 081 091  
112  
Linksys  
111  
012 029  
Lloyd's  
008 032  
111  
LXI  
030 112  
008  
Magnasonic  
Magnavox  
Magnin  
020 121  
167 Voodoo  
168 Wards  
111  
008 020 021 025 027 031 044  
008 012 013 023 029 030 031 032  
012 030 119  
016 028 031  
030 112  
031  
169 White Westinghouse  
170 XR-1000  
171 Yamaha  
172 Zenith  
105  
Marantz  
Marta  
008 031 032  
016 028  
Matsushita  
Media Center PC  
MEI  
008 024 025 026 078 092  
111  
111  
173 ZT Group  
031  
38 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
NO. Brand  
Code  
5
Archer  
016  
Remote Control Codes  
SETBOX  
6
AT&T  
003  
7
Bell South  
Cable Vision  
Cabletenna  
Cableview  
Clearmaster  
ClearMax  
Colour Voice  
Comcast  
Comtronics  
Contec  
050  
8
006  
9
015  
NO. Brand  
Code  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
014  
049  
1
AccessHD  
Alpha Digital  
Alphastar  
076  
049  
2
076  
018  
3
036  
000 005  
4
Artec  
072  
019  
5
CaptiveWorks  
Channel Master  
Chaparral  
Coolsat  
067  
020  
6
078  
Coolmax  
COX  
049  
7
027  
005  
8
066  
Daeryung  
Director  
Dumont  
057  
9
Coship  
083  
043  
10  
11  
12  
Crossdigital  
Digital Stream  
DIRECTV  
099  
056  
077  
Eastern  
021  
006 007 008 009 010 011 012 017 022 023 024 025 026 040 043  
Everquest  
Focus  
045  
047 048 049 050 052 053 055 057 085 086 088 091 096 097  
048  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
Dish Network  
Dishpro  
Drake  
000 001 002 003 013 014 087 089 092 095  
GC Electronics  
GE  
016  
087 089 092 095  
009 010  
028  
Gehua  
055  
Echostar  
Expressvu  
GE  
000 013 014 087 089 092 095 098  
Gemini  
045  
089 095 098  
General Instrument  
Goldstar  
Hamlin  
005 008 010 040 042 043  
004 005 080  
046  
General Instrument  
GOI  
029 093  
022  
095  
Hitachi  
010  
Goodmind  
Hisense  
Hitachi  
081  
Jasco  
045  
094  
Jerrold  
008 010 031 032 040 042 043 045  
023 037  
LG  
053  
HTS  
095  
Magnavox  
MegaCable  
Memorex  
Motorola  
Movie Time  
Multitech  
NEC  
025  
Hughes Network Systems  
Humax  
008 011 016 017 019 024 040 052 085  
005  
068  
024 044  
Ilo  
094  
000 003 005 008 039 040 042 043  
Insignia  
Jerrold  
075  
025  
093  
049  
JVC  
000 013 014 095  
012  
Lasonic  
LG  
082  
NET Brazil  
NSC  
036  
059 071  
025  
Magnavox  
Memorex  
MicroGem  
Mitsubishi  
Motorola  
Next Level  
Panasonic  
Pansat  
022 073  
Oak  
020  
022  
Pace  
001 047  
074  
Panasonic  
Paragon  
Philips  
028 030 044  
017 063  
044  
090 093  
017 018 023  
093  
Pioneer  
002 026 033 038 046  
009 057 060 061  
Popular Mechanics  
Proscan  
Pulsar  
048  
064  
009 010  
Paysat  
022  
044  
PCT  
078  
Quasar  
044  
Philco  
073  
Radio Shack  
RCA  
045 049  
Philips  
008 016 017 019 021 022 049 050 085  
014 030  
Pioneer  
Primestar  
Proscan  
Proton  
008  
Realistic  
Recoton  
Regal  
016  
035  
048  
004 005 051 088  
020  
094  
Regency  
Rembrandt  
Runco  
021  
Radio Shack  
RCA  
093  
010  
004 005 006 019 025 039 041 044 045 046 047 048 051 069  
044  
Realistic  
Samsung  
Sharp  
030  
Samsung  
Scientific Atlanta  
Signal  
001 026 035 046  
008010 018 019 020 053 056 058  
001 002 003 007 013 037 038 041  
062  
045  
Sony  
007 015 042 043 054 055 086  
Signature  
Sony  
010  
Star Choice  
STS  
090 093  
038  
006 051  
030  
Sprucer  
STS1  
031  
Standard Component  
Starcom  
Stargate  
Starquest  
Supercable  
Supermax  
TIME WARNER  
Tocom  
027  
STS2  
032  
031 045  
045  
STS3  
033  
STS4  
034  
045  
Tivax  
0776  
008 019  
011  
040  
Tivo  
049  
Toshiba  
UltimateTV  
Uniden  
004  
086  
011  
022  
Torx  
052  
US Digital  
Viewsat  
Voom  
094  
Toshiba  
Trans PX  
Tristar  
044  
065  
054  
093  
049  
Zenith  
012 070 079  
084  
TS  
052  
Zentech  
Tusa  
045  
Tv86  
025  
Unika  
015 016  
031  
United Cable  
Universal  
V2  
015 016  
049  
CABLE  
View Star  
Viewmaster  
Vision  
020 023 025  
049  
NO. Brand  
Code  
009 010 011 013 031 044  
1
2
3
4
ABC  
049  
007  
Vortex View  
Zenith  
Adelphia  
Americast  
Antronix  
049  
050  
029 034 044 050  
048  
015 016  
Zentek  
Owner s Manual 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Universal Remote Control  
Remote Control Codes  
AUDIO  
NO. Brand  
Code  
NO. Brand  
Code  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
Magnavox  
Marantz  
Mark Levinson  
McIntosh  
MCS  
1
Accuphase  
Acurus  
292  
075 191 318 319 322 329  
2
266  
215 228 260 286 291 318 322 328  
3
ADC  
319  
298  
4
Adcom  
208 219  
227  
5
Admiral  
308  
328  
Memorex  
Midiland  
Mitsubishi  
Modulaire  
NAD  
6
ADS  
309  
315  
7
Aiwa  
118 126 168 318  
280  
8
Akai  
310  
184 194  
329  
9
Alco  
332  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
Altec Lansing  
Amphion Media Works  
AMW  
301  
261 335  
291 334  
290  
Nakamichi  
NEC  
325  
325  
Nikko  
Anam  
321  
281  
Onkyo  
Angstrom  
Apex  
267  
043 044 045 046 047 080 018 087 094 097 119 124 127 146 166  
195  
167 178 181 203 217  
93  
94  
95  
Optimus  
Oritron  
Arcam  
294 311  
283 293 319 320 321 330  
AudioSource  
Audiotronic  
Audiovox  
B & K  
268  
324  
Panasonic  
322  
019 020 201 022 023 024 069 076 077 091 098 107 113 144 151  
190 214 220 332  
209 328  
96  
97  
98  
99  
Parasound  
Penney  
Philco  
213 236  
230  
Bang & Olufsen  
Bel Canto Design  
Biamp  
336  
329  
269  
332  
Philips  
270  
183 210 286 294 318 322  
100 Pioneer  
BOSE  
071 088 285  
025 026 027 028 029 030 031 062 068 072 090 100 101 105 123  
Boston Acoustics  
California Audio Labs  
CambridgeSoundWorks  
Capetronic  
Carver  
305  
132 148 149 162 212 246 247 248 249 250 251 252 253 254 283  
271  
287 319 320  
101 Polaroid  
102 Polk Audio  
103 Prima  
241  
222 226  
319  
216 286 318  
318 322  
307  
104 Proscan  
105 Qisheng  
106 Quasar  
107 RadioShack  
108 RCA  
Cary Audio Design  
Casio  
272  
048  
329  
304  
Chase Technologies  
Clarinette  
Classe  
273  
328  
329  
331  
297  
048 049 050 051 151 137 234 283 319 320 321 332  
109 Realistic  
Classic  
221  
293 329  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
Regent  
Rio  
Coby  
147 331  
333  
Creative  
274 302  
327  
Rotel  
Curtis  
207  
231  
Samsung  
Sansui  
Sanyo  
Curtis Mathes  
Dell  
283  
084 103 138 143  
312  
291 318  
Denon  
053 054 055 056 057 133 134 156 157 158 160 161  
238 326  
Sharp  
163 164 165 171 172 176 180 185 187 188 189 206  
205 242 296  
Sharper Image  
Sherwood  
Shure  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
Digital Audio Control  
Dual  
275  
331  
258  
145 243  
Durabrand  
Eclipse  
Elan  
299  
290  
120 Sonic Blue  
121 Sony  
218  
327  
295  
000 001 002 003 004 005 006 007 058 058 059 060 061 063 064  
Emerson  
Fisher  
229  
065 066 067 070 074 079 085 093 108 109 110 111 112 117 125  
326  
128 129 131 140 170 262 263 264 265  
122 Soundesign  
123 Soundmatters  
124 Soundstream  
125 Stereophonics  
126 Sunfire  
Fonmix  
Fosgate  
GE  
303  
282 289 330  
276  
232  
048 282  
316  
Glory Horse  
Go Video  
GPX  
331  
320  
306  
323  
127 Teac  
196  
223 321 332  
128 Technics  
129 Thorens  
130 Toshiba  
131 Tview  
Gradiente  
Harman/Kardon  
Hitachi  
235 313  
052 086 114 116 141 328  
177 224 286 318  
322  
326  
152  
iLive  
244  
259  
132 Venturer  
133 Victor  
Inkel  
314  
239 332  
Insignia  
Integra  
233 240  
284  
134 Wards  
317  
282 287 289 318  
135 Xantech  
136 Yamaha  
iSymphony  
Jamo  
245  
300  
256  
008 009 010 011 012 013 014 015 016 017 018 078 083 092 096  
JBL  
186 193  
099 102 106 120 139 142 153 154 155 169 173 174 179 192 197  
Jensen  
JVC  
257  
198 199 200 201 202 204 255 317  
137 Yorx  
032 033 034 035 036 037 104 121 150 182 211 284  
329  
138 Zenith  
331  
136 159  
67  
Kenwood  
038 039 040 041 042 073 082 089 095 115 122 130  
135 323  
332  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
KLH  
Knoll Systems  
Koss  
277  
237 324  
225  
Krell  
Left Coast  
Lenoxx  
LG  
386  
299 333  
175  
Linn  
318  
Lloyd's  
Logitech  
Luxman  
329  
278  
279 288  
40 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Maintenance  
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have  
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water  
and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to  
wipe the screen.  
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.  
Cleaning the Cabinet  
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.  
Extended Absence  
If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power  
cord to protectagainst possible damagefrom lightning orpower surges.  
Owner s Manual 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Product Specification  
Resolution  
1920X1080(Dot)  
120V~ , 60Hz  
Power requirement  
Stand-by Consumption  
Color system  
less than 1W(models - HL26R1, HL32R1, HL26K1, HL32K1, HL32XK1)  
NTSC ATSC Clear QAM  
75 ohm  
External Antenna Impedance  
Color  
16,770,000(256 steps of each R, G and B)  
Operating Temperature Range  
Operating Humidity Range  
32~104 F(0~40 C)  
Less than 80%  
Maximum Elevation  
6561 feet (2000m)  
Dimensen(WXDXH) Unit:inches/mm  
(Including stand)  
MODEL  
Weight(pounds/kg)  
40.3X12.9 X28.7inches  
1023X328X730 mm  
58.6/26.6  
HL42XK1  
The specifications shown above may be changed without prior notice for quality improvement.  
42 TV LCD-TFT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Troubleshooting  
For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to  
the instructions listed hereunder before contacting the after-sales service for technical assistance.  
Verify if the television is properly plugged.  
Verify if the television is properly supplied power.  
Verify if electricity is available.  
No picture, no sound  
Blank screen  
Verify if correct signals are input.  
Press INPUT button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Press Mute button and verify if Mute mode is set.  
Switch to other channel and verify if the same problem  
happens.  
No sound  
Press VOL+ button to see if the problem can be solved.  
Verify if sound system is correct. Refer to Page 22 for  
adjustments.  
Poor sound  
Verify if correct channel is selected.  
Adjust the antenna.  
Make adjustments by Fine Tune and Manual Scan.  
No picture in some  
channel  
Verify if the same problem exists in other channels.  
Check out of picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some  
channel program  
(black and white)  
Verify if the antenna is correctly connected.  
Verify if the antenna is in good condition.  
Make fine adjustment of channel.  
Spots with some or  
all pictures  
Check for local interference such as an electrical  
appliance or power tool.  
Horizontal/vertical bars  
or picture shaking  
Disconnect the television from power supply and, 10  
seconds later, connect the television to the power supply.  
If the problem still exists, contact authorized after-sales  
service for technical assistance.  
Television out of control  
Note: Do not leave the television with static picture in an extended period as the image may become permanently burned.  
Note: Production of the LCD screen requires high and precision technologies. However, there might be some dark or bright  
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400  
meters above the sea level where the air pressure is below 750hpa, the picture on the LCD screen may be affected and a  
muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is  
resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited  
warranty.  
Owner s Manual 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox Hearth Indoor Fireplace EDV3530 User Manual
LG Electronics Motorcycle PR200 User Manual
LG Electronics Telephone LDP7004N D User Manual
Linksys Network Card Compact USB 20 User Manual
Logitech Speaker N550 User Manual
Makita Saw 5007NB User Manual
Maxtor DVR 4 Channel Digital Video Recorder User Manual
McAfee Network Card CERS Port User Manual
Memorex Portable CD Player MP3112 User Manual
Memorex Stereo System MX5510 User Manual