LaCie Computer Drive Brick User Manual

User’s Manual  
Manuel Utilisateur  
Guída Utente  
Handbuch  
Manual de Instrucciones  
Gebruikershandleiding  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
page 1  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Table of Contents  
Foreword  
Precautions  
2
4
1. Unpacking Your LaCie Drive  
1.1 Minimum System Requirements  
1.2 Stacking Your LaCie Brick  
2. Getting Connected  
5
5
6
7
2.1 Connect the Power Supply and Switch On the Drive  
2.2 Connect the USB 2.0 Cable to the Drive and to Your Computer  
3. Using Your LaCie Drive  
10  
11  
12  
3.1 Formatting and Partitioning Your LaCie Brick Hi-Speed USB 2.0 Hard Drive  
3.1.1 Windows Users  
3.1.2 Mac Users  
4. Helpful Information  
13  
13  
15  
17  
17  
17  
18  
19  
20  
20  
21  
22  
26  
28  
4.1. Advice for Optimizing USB 2.0 Connections  
4.1.1. What Is USB 2.0?  
4.1.2. Disconnecting USB 2.0 Devices  
4.1.3. Data Transfers  
4.1 File System Formats  
4.2.1. Windows Users  
4.2.2. Mac Users  
5. Troubleshooting  
6. Contacting Customer Support  
7. Warranty  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Foreword  
page 2  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Copyrights  
Copyright © 2005 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or  
transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior  
written consent of LaCie.  
Trademarks  
Apple, Mac and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows 98, Windows 98 SE,  
Windows 2000, Windows Millennium Edition and Windows XP are registered trademarks of Microsoft Corporation. Other  
trademarks mentioned in this manual are the property of their respective owners.  
Changes  
The material in this document is for information only and subject to change without notice. While reasonable efforts have  
been made in the preparation of this document to assure its accuracy, LaCie assumes no liability resulting from errors or  
omissions in this document, or from the use of the information contained herein. LaCie reserves the right to make changes or  
revisions in the product design or the product manual without reservation and without obligation to notify any person of such  
revisions and changes.  
FCC Statement:  
Warning! Modifications not authorized by the manufacturer may void the users authority to operate this device.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are  
LaCie Brick Hi-Speed USB 2.0 Hard Drive  
designed to provide reasonable protection against harmful interference when the  
equipment is operated in a commercial environment. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is likely to cause  
Tested To Comply  
With FCC standards  
FOR HOME OR OFFICE USE  
harmful interference in which case the user will be required to correct the interference at his own expense.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Foreword  
page 3  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
• Consult the dealer or an experienced radio/TV technician for help.  
Canada Compliance Statement  
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
Manufacturers Declaration for CE Certification  
We hereby certify that this device is in compliance with both the EMC Directive (89/336/EEC) and the Low Voltage Directive  
(73/23/EEC) issued by the Commission of the European Community.  
Compliance with these directives implies conformity to the following European Norms:  
Class B EN60950, EN55022, EN50082-1, EN61000-3-2  
With reference to the following conditions:  
73/23/EEC Low Voltage Directive  
89/336/EEC EMC Directive  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
page 4  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Health And Safety Precautions  
Only qualified persons are authorized to carry out maintenance on this device.  
• Read this User's Guide carefully, and follow the correct procedure when setting up the device.  
• Do not open your hard drive or attempt to disassemble or modify it. Never insert any metallic object into the drive to avoid  
any risk of electrical shock, fire, short-circuiting or dangerous emissions. Your hard drive contains no user-serviceable parts. If  
it appears to be malfunctioning, have it inspected by a qualified LaCie Technical Support representative.  
• Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing  
liquids on the drive, as they may spill into its openings. Doing so increases the risk of electrical shock, short-circuiting, fire or  
personal injury.  
General Use Precautions:  
• Do not expose the hard drive to temperatures outside the range of 5° C to 35° C (41° F to 95° F) in operating mode. Doing  
so may damage the drive or disfigure its casing. Avoid placing your drive near a source of heat or exposing it to sunlight  
(even through a window). Inversely, placing your drive in an environment that is too cold or humid may damage the unit.  
Because of heat issues, LaCie recommends that users do not stack more than three LaCie Bricks together. When stacking three  
bricks, environment temperature should not exceed 30°C (86°F).  
• Always unplug the hard drive from the electrical outlet if there is a risk of lightning or if it will be unused for an extended  
period of time. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire.  
• Use only the power supply shipped with the device.  
• Do not use the hard drive near other electrical appliances such as televisions, radios or speakers. Doing so may cause  
interference which will adversely affect the operation of the other products.  
• Do not place the drive near sources of magnetic interference, such as computer displays, televisions or speakers. Magnetic  
interference can affect the operation and stability of your hard drive.  
• Do not place heavy objects on top of the drive or use excessive force on it.  
• Never use excessive force on your drive. If you detect a problem, consult the Troubleshooting section in this manual.  
• Protect your hard drive from excessive exposure to dust during use or storage. Dust can build up inside the device,  
increasing the risk of damage or malfunction.  
• Never use benzene, paint thinners, detergent or other chemical products to clean the outside of the drive. Such products will  
disfigure and discolor the casing. Instead, use a soft, dry cloth to wipe the device.  
• Do not block the ventilation outlets on the rear of the drive. These help to keep your drive cool during operation. Blocking  
the ventilation outlets may cause damage to your drive and cause an increased risk of short-circuiting or fire.  
Warning! The drive's warranty may be void as a result of the failure to respect the precautions listed above.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking Your LaCie Drive  
page 5  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
1. Unpacking Your LaCie Brick Hi-Speed USB 2.0 Hard Drive  
Building on over a decade of design excellence, LaCie has created a new line of drives that are timeless and crafted to blend  
functionality with high-technology. These latest drives are performance-based solutions that will power you through your  
specific applications.  
Ideal for speed intensive applications, the LaCie Brick Hi-Speed USB 2.0 Hard Drive handles the curves of your demanding  
data needs. Secure and stable, the LaCie Brick Hi-Speed USB 2.0 Hard Drive is an ideal way to add space to your  
computer; you can divide the drive into specific spaces (partitions) for different parts of your data, or leave it alone and  
simply use it as one big volume.  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive  
1
1
2
3
Power supply and adapter cable  
Hi-speed USB 2.0 certified cable  
LaCie Storage Utilities CD-ROM  
3
4
2
.
4
1.1. Minimum System Requirements  
System Requirements for USB 2.0:  
• Windows 98 SE, Windows 2000, Windows Me and Windows XP  
• Mac OS 9.x (Apple USB support 1.3.5 and greater) and 10.x  
Hardware Requirements for USB 2.0:  
• Computer with USB 2.0 or 1.1 interface*  
• Intel Pentium 233MHz-compatible processor or greater  
• Minimum 32MB RAM  
Tech Note: *To achieve USB 2.0 speeds, your drive must be connected to a USB 2.0 host port. If it is connected to a  
USB 1.1 port, your drive will operate at USB 1.1 speeds. For more details, see 4.1. Advice for Optimizing USB 2.0  
Connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking Your LaCie Drive  
page 6  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
1.2 Stacking your LaCie Brick  
Your LaCie Brick is designed to stack under another LaCie Brick. To allow for proper cooling, do not stack more than three  
LaCie Bricks together. When stacking three bricks, operating temperature should not exceed 30°C (86°F).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected  
page 7  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
2. Getting Connected  
Follow these steps to quickly get your LaCie Drive powered on and connected to your computer. To get  
started, go to: 2.1. Connect the Power Supply and Switch On the Drive or 2.2. Connect the USB 2.0  
Cable to Your LaCie Drive and to Your Computer  
Once you’ve gotten the drive powered on and connected to your computer, move on to section 3. Using  
Your LaCie Drive for important information on how to format and utilize your drive.  
Windows 98 SE and Windows Me Users!  
Mac OS 9.x Users!  
Before following the next three steps, first install this important software to help you configure and manage your LaCie drive.  
• Windows 98 SE and Windows Me Users must install Silverlining 98 and USB 2.0 Driver  
• Mac OS 9.x Users, must install Silverlining Pro.  
See the following pages for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected  
page 8  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Windows 98 SE and Windows Me Users Only! Silverlining 98 and USB 2.0 Driver Installation  
To use your new LaCie Brick Hi-Speed USB 2.0 Hard Drive , first install the necessary driver software and then  
Silverlining 98. Follow the steps below to install the necessary drivers and software to configure your drive. Then  
move on to the power supply and USB 2.0 installation steps.  
Step 1) Insert the LaCie Storage Utilities CD-ROM in your computers internal CD/DVD drive and open the disc  
(Fig.2.2).  
Step 2)  
A) Double-click the USB 2.0 Drivers Install folder.  
Step 1)  
B) Double-click on the LaCie_USB_Driver_Install.exe icon. The  
LaCie USB2 Storage Driver screen will appear. Click on Next.  
C) Installation will finish automatically.  
Step 2) Re-open the LaCie Storage Utilities CD-ROM.  
A) Double-click the Silverlining 98 folder.  
B) Double-click the Silverlining98_Install.EXE icon.  
C) Silverlining 98 will then initialize the install screen.  
Fig.2.2  
D) The “Welcome” screen will appear. Click Next.  
E) The “Destination Location” screen will appear. To alter the location where the software is installed on your system,  
click the Browse button. If you do not want to change the location, do not click on the Browse button, and allow the  
software to be installed in its default location. Click Next to continue.  
F) Next is the “Start Installation” screen. Click Next.  
G The software installation will begin, and you will see the installation screens.  
H) Finally, you will see the “Silverlining 98 has been installed correctly” screen. Click Finish to complete the  
installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected  
page 9  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Mac OS 9.x Users Only! Silverlining Pro Installation  
Before connecting the power supply and USB 2.0 cable to your drive, you will need to install Silverlining Pro, which  
will help you manage your drive. Follow the steps below to install the necessary drivers and software to configure  
your drive. Then move on to the power supply and USB 2.0 cable installation steps.  
1) Insert the LaCie Storage Utilities CD-ROM in your computers internal CD/DVD drive.  
2) Open the CD icon and double-click on the Silverlining Software folder.  
3) Click on the Silverlining Installer icon (Fig.2.1).  
4) The Silverlining Utilities screen appears. Click on Continue.  
5) The “Silverlining Read Me” screen appears. Read the following information  
and click on Continue.  
6) The “License Agreement” screen appears. Click on Agree.  
7) The “Installation” screen appears. Choose either Easy Install, Custom Install or  
Uninstall from the pull-down menu in the upper left-hand side of the “Installation”  
screen. Once you’ve made your choice, click on Install.  
8) A message appears to confirm that the installation was successful. Now move  
onto Step 1.  
Fig.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected  
page 10  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Step 2.1 –  
Connect the power supply and switch on the drive.  
1
2
3
4
Cable A  
Cable B  
Power Supply Brick  
There are two cables that are supplied with the power supply: one cable (A) connects to a power outlet, such as a wall outlet  
or a surge protector; and the other cable (B) connects to the LaCie drive.  
1
Connect Cable A to your LaCie Drive.  
Connect Cable B to the Power Supply brick.  
2
3
4
Connect Cable B to a grounded surge protector or wall outlet.  
Turn the drive on and off by using the On/Off switch.  
Warning! Use only the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another  
LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device  
and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the  
adapter may result in damage to your drive and will void your warranty.  
Important Note: You may use your LaCie drive when in a foreign country, thanks to its autoswitching 100-240 Volt  
power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. Consult  
LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any damage  
to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie  
will void your warranty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected  
page 11  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
Step 2.2 –  
Connect the USB 2.0 cable to your LaCie Drive and to your computer.  
2
USB 2.0 Logo  
USB 1.1 Logo  
1
Examine the cable carefully and make sure that you have the USB 2.0 cable properly aligned, then insert the cable  
firmly into the USB port on the back of the drive for a stable connection.  
1
2
Look for a USB 2.0* logo (which generally is used to identify the port) next to the connector on the front or back of  
your computer, then insert the cable firmly into the USB port for a stable connnection.  
Tech Note: Please refer to section 4.1 Advice for Optimizing USB 2.0 Connections for important information on  
disconnecting USB 2.0 devices and ensuring optimum performance.  
Tech Note: *To achieve USB 2.0 speeds, your drive must be connected to a USB 2.0 host port. If it is connected to a  
USB 1.1 port, your drive will operate at USB 1.1 speeds. For more details, see 4.1 Advice for Optimizing USB 2.0  
Connections.  
Important Note: Windows Users: It may take a few seconds for your computer to recognize the drive and assign it  
a letter.  
Mac Users: It may take a few seconds for the drive to appear on your desktop.  
Mac OS 10.x  
Mac OS 9.x  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your LaCie Drive  
page 12  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
3. Using Your LaCie Drive  
Once you’ve connected your drive and it is recognized by your operating system (i.e. Windows 98SE, Me, 2000, XP or Mac  
OS 9.x or 10.x), you are ready to format and partition the drive. In order to store information on a hard drive, it must have a  
file system and be divided into sections that will contain the data that you wish to store. This process is called formatting.  
In order to utilize a hard disk drive, it has to be formatted first. Formatting a disk consists of the following: the operating  
system erases all of the bookkeeping information on the disk, tests the disk to make sure that all of the sectors are reliable,  
marks bad sectors (i.e., those that are scratched) and creates internal address tables that it later uses to locate information.  
Once formatted, the actual available storage capacity varies, depending on operating environment, and is generally about  
10% less than the non-formatted capacity.  
Important Note: All LaCie Hard Drives are originally formatted in FAT 32, so if you want to use another file system,  
you will need to re-format the hard drive. The following information will help you decide which file system format to  
use.  
After you’ve formatted the drive, you will the opportunity to divide the hard drive into sections, called Partitioning. A partition  
is a section of the hard drives storage capacity that is created to contain files and data. For instance, you could create three  
partitions on your drive: one partition for your word documents, one for your spreadsheets and one for your multi-media files.  
File System Formats  
There are essentially three different file system formats: FAT 32, NTFS, and Mac OS Extended (HFS+).  
Use FAT 32 if:  
• you will be using your drive between both Windows and Mac OS 9.x or 10.x; or sharing the drive between Windows 98  
SE, Me, 2000 or XP  
Use NTFS if:  
• you will be using the drive only under Windows 2000 or Windows XP; performance will be generally greater when  
compared to FAT 32  
Use HFS+ if:  
• you will be using the drive on Macs only; performance will be generally greater when compared to FAT 32  
For more information, please refer to section 4.2 File System Formats.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your LaCie Drive  
page 13  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
3.1. Formatting And Partitioning Your LaCie Brick Hi-Speed USB 2.0 Hard Drive  
Once you have set-up your LaCie Brick Hi-Speed USB 2.0 Hard Drive , you can reformat or partition it to suit your needs.  
3.1.1. Windows Users  
• Windows 98 SE and Me – Install and use LaCie Silverlining 98, which is included with your drive.  
• Windows 2000 and XP – Use the Disk Management Utility, which is native to the operating system.  
For instructions on installing and using Silverlining 98, please refer to the Silverlining manual, located on your LaCie Storage  
Utilities CD, in PDF format.  
Formatting And Partitioning Using Windows 2000 And Windows XP  
The process of formatting and partitioning a drive on a computer running Windows 2000 or Windows XP consists of two  
steps: (1) installing a signature on the drive, and (2) partitioning/formatting the drive. These steps will erase anything that is  
on the disk.  
1) Connect the drive to the computer via the USB 2.0 port.  
2) Right-click My Computer and click Manage.  
3) From the Computer Management window, select Disk Management (located below the Storage group).  
4) If this is the first time the drive is being formatted, Windows 2000 will launch the Write Signature Wizard (Write Initialize  
Wizard in Windows XP). Click  
Next.  
5) Windows will list the new  
drive(s) attached. If you are  
formatting a single drive, only  
one drive should be visible. Select  
the checkbox next to the drive  
and click Next.  
Important  
Note:Check the  
"quick format"  
box.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your LaCie Drive  
page 14  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
6) Click Finish to exit the Wizard.  
7) Now, with the disk management window open, a new drive will be visible. Right-click on the available space and select  
Create Partition...  
8) This will bring up the Create Partition Wizard. Click Next.  
9) Select Primary Partition. Click Next.  
10). Here you must specify partition size. It is recommended that you leave the partition set to the maximum available size,  
unless you want multiple partitions on the same drive. Click Next.  
11) Select Assign drive letter and select the desired letter for the drive. Click  
Next.  
12) Select Format this partition… and then select a file system:  
FAT32  
FAT32 is a file system that is compatible with Windows 98 SE, Windows Me, Windows 2000 and Windows XP; however, it  
has limitations. In Windows 2000 and Windows XP, you will not be able to create a partition greater than 32GB.  
NTFS  
NTFS is a newer file system that is compatible only with Windows NT, Windows 2000 and Windows XP. It has fewer  
limitations than FAT 32 and will enable a partition to be created that is larger than 32GB.  
Important Note: Please refer to section 4.2. File System Formats, for a more detailed discussion on the differences  
between the two systems.  
13) Click Next.  
14) Click Finish.  
15) Disk Management will create the partition and begin formatting the  
drive. Once completed, close Disk Management and your new drive will be  
ready to use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your LaCie Drive  
page 15  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
3.1.2. Mac Users  
• Mac OS 9.x – Install and use LaCie Silverlining Pro, which is included with your drive.  
• Mac OS 10.x – Use the Apple Disk Utility application, which is native to the operating system.  
For instructions on installing and using Silverlining Pro, please refer to the Silverlining manual, located on your LaCie Storage  
Utilities CD, in PDF format.  
Formatting And Partitioning Using Mac OS 10.x  
Warning! Following these steps will erase anything that is on the hard drive. Therefore, if you have information that  
you want to protect or continue to use, backup this information before performing these steps.  
1) Connect the drive to the computer via the USB 2.0 port.  
2) Once the drive mounts onto the desktop, go to the Menu Bar, and open Go.  
3) From the Go menu, click on Applications.  
4) In the Applications menu, open the Utilities folder, and then double-click Disc Utility from the Utilities folder.  
5) The Disc Utility window will open. In the  
left side of the window will be a list of the  
available hard disk drives. You should see a  
volume that represents your internal hard  
drive, and one that reads LaCie.  
6) Select the LaCie drive, and then click on  
the Partition tab.  
7) From the Volume Scheme: button, choose  
the number of partitions you want to divide  
the drive into by clicking on the pull down  
menu starting with Current (Mac OS 10.x  
gives you the option of dividing the drive into  
at most 8 partitions). You can customize the  
size of the partitions by using the slide bar  
between the partitions in the Volume  
Scheme: area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your LaCie Drive  
page 16  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
8) In the Volume Information section, create a name for each partition, choose the volume format (Mac OS Extended, Mac  
OS Standard or UNIX File System) and the volume size.  
Important Note: Please refer to section 4.2. File System Formats, for a more detailed discussion on the differences  
between the two systems.  
Important Note: Apple recommends that unless you have a specific reason to use the UNIX File System (UFS), you  
should use the Mac OS Extended format since it provides a more familiar experience to Macintosh users.  
9) In the Options section, click the Install Mac OS 9 Disk Drivers box if you plan on sharing the drive between the Mac OS  
9.x and Mac OS 10.x.  
10) Once you have finalized the volume format, number of partitions, size and options, click OK. The following message will  
appear: “Warning! Saving the new volume will erase all existing volumes. This can NOT be undone. Are you sure you want  
to do that?” Click Partition to continue.  
11) Mac OS 10.x will automatically setup the disk with the partitions and volume format you selected, and your new drive  
will be available for use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Information  
page 17  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
4. Helpful Information  
4.1. Advice For Optimizing USB 2.0 Connections  
The following technical information relates to your LaCie Drive and gives some practical advice:  
4.1.1 What is USB 2.0?  
The new USB 2.0 standard provides higher bandwidth for high-speed peripherals such  
as external hard drives, high-speed scanners and CD-RW drives. USB 2.0 delivers  
transfer rates up to 480Mb/s, while conveniently maintaining backward compatibility  
with USB 1.1 devices.  
USB 2.0 Logo  
USB 1.1 Logo  
USB 2.0 can still be used to connect lower-speed USB 1.1 ports and devices like digital  
cameras, scanners, modems, keyboards, mice, joysticks and printers. In the USB 2.0  
system, existing USB peripherals do not have to be upgraded, and lower-speed  
devices will not require additional performance, instead operating as USB 1.1 devices.  
USB Cables and Connectors  
Your LaCie drive is shipped with a USB 2.0-certified USB cable, to ensure maximum data transfer performance when  
connected to a USB 2.0 port. The cable will also work when connected to a USB 1.1 port, but drive performance will be  
limited to USB 1.1 transfer rates.  
There are also different types of USB connections, such as the mini-cable and device end. Make sure that you have the correct  
type of connection on computer. Consult LaCie Customer Support or your LaCie reseller for more information.  
USB 2.0 Host Bus Adapters and Performance  
To utilize the newly-enhanced USB 2.0 performances, your computer must be equipped with a USB 2.0 host bus adapter card  
(sold separately, such as the LaCie USB 2.0 PCI Card, or integrated by your PC manufacturer) and the appropriate drivers.  
These host bus adapter cards, which include one or more USB ports, are shipped with special USB 2.0 drivers that enable the  
computer to control the card. These drivers must be installed in order for USB 2.0 devices connected to the port to work at  
their correct speeds. For installation instructions, please refer to the documentation that comes with the host adapter card.  
LaCie supplies only the appropriate USB 2.0 drivers for its peripherals and does not provide drivers for third-party host  
adapter cards. To obtain the right drivers for your host adapter card, visit your card manufacturers Internet site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Information  
page 18  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
4.1.2. Disconnecting USB 2.0 Devices  
USB 2.0 external devices feature "plug & play" connection. This means that your drive can be connected and disconnected  
while the computer is running. To prevent failures, it is important you follow these steps when disconnecting your USB 2.0  
device.  
Windows Users  
Important Note: Windows 98 SE Users: If you have installed the Windows Storage Supplement Update, you will  
have to unmount the drive before disconnecting it or powering it down. If you have not installed the update, simply  
disconnect the drive when it is not active. No unmounting is required.  
1) From the System Tray (located in the lower right-hand side of your screen), click on the Eject icon  
(a small green arrow over a hardware image).  
Fig.4.1.4  
2) A message will appear, detailing the devices that the Eject icon controls, i.e. "Safely remove…" Click on this prompt.  
3) You will then be given the following message: "Safe to Remove Hardware" (or similar). It is now safe to disconnect the  
device.  
Mac Users  
You must unmount the hard drive system before disconnecting it or powering it down. Either:  
• Drag the hard drive icon to the trash.  
• Launch Silverlining Pro, highlight the hard drive and select “Unmount.”  
The drive can now be disconnected.  
Mac OS 9.x Mac OS 10.x  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Information  
page 19  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
4.1.3. Data Transfers  
Data transfers are the flow of data that accomplishes a task, usually related to moving data from storage to computer RAM or  
between storage devices. During data transfers, its best to wait before launching other applications on the same USB 2.0  
port. Anomalies may arise with computers that have USB 2.0 controllers* that do not conform to OHCI (Open Host Controller  
Interface) standards. In any other configurations, we cannot ensure 100% correct operation. Due to this, you may encounter  
hanging problems. If this happens, proceed as follows:  
1) Make sure that the USB 2.0 cable is connected tightly and securely on both ends of the cable, from the drive to the  
computer. If you are using a USB 2.0 cable other than the one supplied with your LaCie drive, check that it is USB 2.0  
certified. The cable that is provided with your LaCie drive is USB 2.0 certified.  
Warning! Do not connect USB 2.0 cables so that they form a ring of devices. There is no need for terminators on  
USB 2.0 devices, so the unused USB 2.0 connectors should be left empty.  
2) Check that the power supply and ground connection are seated properly.  
3) Disconnect your computers USB 2.0 cable. Wait 30 seconds. Reconnect.  
Tech Note: *Controller - This is a component or an electronic card (referred to in this case as a “controller card”) that  
enables a computer to communicate with or manage certain peripherals. An external controller is an expansion  
card which fills one of the free slots (i.e. PCI or PCMCIA) inside your PC and which enables a peripheral (i.e. CD-  
R/RW drive, Hard Drive, scanner or printer) to be connected to the computer. If your computer is not equipped with  
a USB 2.0 controller card, you can purchase an external controller through LaCie. Contact your LaCie reseller or  
LaCie Technical Support (6. Contacting Customer Support) for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Information  
page 20  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
4.2 File System Formats  
4.2.1. Windows Users  
There are basically two file system formats for Windows: FAT 32 and NTFS. The following information will hopefully make  
choosing one or the other a little easier.  
FAT 32  
FAT is an acronym for File Allocation Table, which dates back to the beginnings of DOS programming. Originally, FAT was  
only 16 bits, but after the second release of Windows 95 it was upgraded to 32 bits, hence the name FAT 32. In theory, FAT  
32 volume sizes can range from less than 1MB all the way to 2TB. It is the native file system of Windows 98 and Windows  
Me, and is supported by Windows 2000 and XP. When FAT 32 is used with Windows 2000 and XP, though, volume size is  
limited to 32GB (by the Windows partition utility, i.e. Disk Manager), and the individual file size is limited to 4GB.  
NTFS  
This acronym stands for New Technology Filing System, and it is the native file system for Windows NT, Windows 2000 and  
XP. NTFS offers several features that are not available with FAT 32; i.e. file compression, encryption, permissions, and  
auditing, as well as the ability to mirror drives and RAID 5 capabilities. The minimum supported volume size for NTFS is  
10MB, with a maximum of 2TB, with no limit to file size. Volumes created in NTFS can only be directly accessed (not through  
shares) by Windows NT, Windows 2000 and XP, without resorting to help from third-party products.  
Guidelines for Choosing FAT 32 Or NTFS  
Use FAT 32 if:  
You want to access your data on any Operating System - FAT 32 is compatible with Windows 98 SE, Me, 2000, XP, NT,  
Mac OS 9.x and Mac OS 10.x.  
You will be dual booting with an Operating System other than Windows NT or Windows 2000.  
You may need the ability to dual boot down the line. Once you have converted a volume from NTFS to FAT 32, there is no  
going back. You can convert from FAT 32 to NTFS, but not the other way around.  
Use NTFS if:  
You want to optimize drive performance under Windows 2000 or XP.  
You want to encrypt files, assign permissions to files, or want to audit files for access.  
You will be formatting partitions larger than 32GB.  
You need to store individual files that are larger than 4GB.  
You need a filing system that can be mirrored or structured like a RAID 5 configuration.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Information  
page 21  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
4.2.2. Mac Users  
Mac OS 9.x Users:  
You will be able to format the drive in one of two formats, using Silverlining Pro (for specific instructions, please refer to the  
Silverlining Users Manual, in the Silverlining folder): HFS (Mac OS Standard) or HFS+ (Mac OS Extended).  
Important Note: If you will be sharing the hard drive between Macs and Windows operating environments, you will  
want to leave the drive formatted in FAT 32.  
Mac OS 10.x Users: You have the option of formatting the drive in one of four formats: Mac OS Standard (HFS), Mac OS  
Extended (HFS+), MS-DOS File System and UNIX File System (UFS).  
HFS - Mac OS Standard  
Mac OS Standard refers to the file system used by Mac OS 8.0 and earlier. This is no longer a modern file sytem  
specification, and Mac OS Extended is more efficient. Only use this file system if you are creating a volume smaller than  
32MB, using a Mac with a 680X0 processor, or you are creating a file structure that will be need to be used by Macs using  
Mac OS 8.0 or earlier.  
HFS+ - Mac OS Extended  
Mac OS Extended refers to the file system used by Mac OS 8.1 and later. HFS+ represents an optimization of the older HFS  
file system by using hard disk space more efficiently. Building off of HFS, they increased the number of blocks from 65,536 to  
4.29 billion. With HFS+, you are no longer limited by block size.  
MS-DOS File System  
This is the Microsoft file system, more typically known as FAT 32. This is the file system to use if you are going to be using  
your LaCie Brick Hi-Speed USB 2.0 Hard Drive between Macs and Windows operating systems.  
UNIX File System  
This is the file system based on UNIX, and is preferrable for users developing UNIX-based applications within Mac OS 10.x.  
Unless you have a specific reason to use the UNIX File System, you should instead format your drive using Mac OS Extended  
(HFS+), because it provides Mac users with a more familiar operating experience.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
page 22  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
5. Troubleshooting  
In the event that your LaCie CD-RW Drive is not working correctly, please refer to the following checklist to find out where the  
problem is coming from. If you have gone through all of the points on the checklist and your drive is still not working  
correctly, please have a look at the FAQs that are regularly published on our Web site – www.lacie.com. One of these  
FAQs may provide an answer to your specific question. You can also visit the drivers pages, where the most recent software  
updates will be available.  
If you need further assistance, please contact your LaCie reseller or LaCie Technical Support (see 6. Contacting Customer  
Service for details).  
Manual Updates  
LaCie is constantly striving to give you the most up-to-date, comprehensive Users Manuals available on the market. It is our  
goal to provide you with a friendly, easy-to-use format that will help you quickly install and utilize the many functions of your  
new device.  
If your manual does not reflect the configurations of the product that you purchased, please check our Web site for the most  
current version available.  
The Issue  
Questions to Ask  
Possible Solutions  
The drive is not  
recognized.  
Is the drives power on?  
Check to see that all of the power cords are properly  
connected and that the switch on the rear of the drive is  
turned on. If you are using a surge protector, make sure that  
it is switched on, too.  
Does an icon for the drive appear Check for an icon on the Desktop (on a Mac) or in My  
on the computer?  
Computer (on a PC).  
Are all of the cables connected  
securely and correctly?  
Make sure that all the steps in section 2. Getting Connected  
have been followed correctly. Examine the connections  
carefully to ensure that all the cables are inserted in the  
correct orientation and in the correct location.  
Are both ends of the USB cable  
connected and properly seated?  
Check both ends of the USB cable. Disconnect them, wait 10  
seconds, and reconnect them. If the drive is still not  
recognized, restart your computer and try again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
page 23  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
The Issue  
Questions to Ask  
Possible Solutions  
The drive is not  
recognized.  
Are the USB drivers installed  
correctly and enabled?  
Mac Users: Open Apple System Profiler and click on the  
Devices and Volumes tab. If your device is not listed, recheck  
the cables and try the other troubleshooting solutions listed  
here.  
Tech Note: Mac Users: Apple is constantly providing updated support for drive mechanisms within OS 10.x. To  
ensure that you have the latest support, upgrade to the latest version of OS 10.x. To access the latest updates an  
upgrades, pull down the Apple Menu and click on System Preferences. In the section titled System, click on  
Software Update and then click Update Now. Your computer will then automatically connect via the Internet to  
access the latest updates from Apple.  
Windows 98 SE & Me Users: Go to Start > Settings >  
Control Panel > System > Device Manager > USB Controller  
> click on the plus sign next to the controller icon, and you  
should see your device listed.  
Tech Note: Windows Users: Microsoft  
consistently posts updated drivers and support  
fixes for their operating systems. Go to  
Microsofts Web site, support.microsoft.com,  
Windows 2000 Users: Go to Start > Settings > Control  
Panel > System > Hardware tab > Device Manager button >  
USB Controller > click on the plus sign next to the controller  
icon, and you should see your device listed.  
for more information.  
Windows XP Users: Go to Start > Control Panel >  
Performance and Maintenance > System > Hardware tab >  
Device Manager button > USB Controller > click on the plus  
sign next to the controller icon, and you should see your  
device listed.  
Is there a conflict with other device If you cannot see the device, recheck the cables and try the  
drivers or extensions?  
other troubleshooting solutions listed here.  
Consult LaCie Technical Support. See section 6. Contacting  
Customer Support for more details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
page 24  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
The Issue  
Questions to Ask  
Possible Solutions  
The drive is not  
recognized.  
Is the file system supported by your Check the documentation for your Operating System.  
Operating System?  
Does your computers configuration Check section 1.1. Minimum System Requirements.  
meet the minimum system  
requirements for use with this drive?  
Was the drive originally formatted If the drive is configured as a removable drive under  
as a removable disk?  
Windows 98SE or Windows Me, the removable setting will  
need to be re-checked each time that the drive is taken to a  
new system. To do this, go to the Device Manager and click  
on the Drives Settings tab.  
Error messages under Did you get an Error –50 message When copying files or folders from Mac OS 10.x to a FAT 32  
Mac OS 10.x.  
while copying to a FAT 32 volume? volume, certain characters cannot be copied. These  
characters include, but are not limited to:  
? < > / \ :  
Check your files and folders to ensure that these types of  
characters are not being used.  
Did you get an error message  
Simply ignore this message. The drive will remount to the  
telling you that the drive has been desktop. LaCie drives conserve power by spinning down  
disconnected when coming out of  
sleep mode?  
when you set your computer to sleep mode, and when the  
computer is “woken” from sleep, it does not give the drive  
enough time to spin-up from its sleep mode.  
The drive is working  
slowly.  
Are other USB devices connected to Disconnect any other USB devices and see if performance  
the same port? improves.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
page 25  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
The Issue  
Questions to Ask  
Possible Solutions  
The USB 2.0 drive is not Is the drive connected to a USB 1.1 If so, it is normal that the drive runs at USB 1.1 speeds. A  
running noticeably  
faster than a USB 1.1  
drive.  
port on your computer, or to a USB USB 2.0 device can only run at USB 2.0 speeds when con-  
1.1 hub?  
nected to a USB 2.0 port or hub and controlled by the appro-  
priate USB 2.0 drivers.  
Is the drive connected to a USB 2.0 Check to see that the USB 2.0 drivers for your Host USB 2.0  
port on your computer?  
port and for your USB 2.0 device have been correctly  
installed (see the 4.1.1 What Is USB 2.0? section for a more  
detailed discussion). If in doubt, uninstall the driver and then  
reinstall it.  
Does your computer or operating  
system support USB 2.0?  
See the 4.1.1 What Is USB 2.0? section for a more detailed  
discussion.  
Tech Note: Technically, you can connect up to 127 devices to a single USB bus. For more than two devices, you  
must make new connections using a peripheral called a "hub." A hub, which you hook up directly to a USB connec-  
tor on your computer, usually has 4 or 7 output connections enabling you to connect the same number of peripher-  
als. One of the hub's main functions is to regenerate signals that lose part of their strength as they are transmitted  
via the USB cable. By connecting yet another hub to a connector on the existing hub, you can then plug in a new  
set of peripherals and so on, up to a maximum of 127.  
You can use your USB 2.0 devices with USB 1.1 hubs, but the peripherals will be limited to USB 1.1 performance  
levels. As USB 2.0 is backwards compatible, you will be able to connect USB 1.1 devices to USB 2.0 hubs; howev-  
er, the USB 1.1 devices will still maintain their normal performance levels (i.e. 12 Mb/s).  
In practice, users who desire enhanced USB 2.0 throughput will need to connect their USB 2.0 hardware on both  
ends of a 2.0 hub to achieve the "high-speed" mode. On one end, a USB 2.0 compliant host controller resides on  
the host PC to manage the enumeration process and power management. On the other end, USB 2.0 hardware  
must be connected directly to the root hub or through a USB 2.0 hub.  
Some hubs have no power supply and others are self-powered. When you choose a hub, opt for the self-powered  
variety, as they have their own AC adapter. The most powerful hubs provide 0.5A of power to each port. If you buy  
a hub, make sure that it supports per-port switching. This function prevents the entire chain of peripherals from  
freezing up if one of them is not working properly or is down.  
Important Note: Avoid using USB connectors found on certain peripherals such as keyboards. These are passive (or  
pass-through) connectors that lead to power loss and unstable operation.  
Important Note: Only use USB cables shorter than 5 meters (approximately 15 feet). Using longer cables cause the  
peripherals to malfunction due to excessive reduction in electrical signal strength.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contacting Customer Support  
page 26  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
6. Contacting Customer Support  
Before You Contact Technical Support  
1) Read the manuals and review the Troubleshooting section.  
2) Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the  
cables are correctly and firmly attached.  
If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive  
to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your  
computer and that you have the following information on hand:  
Your LaCie drive's serial number  
• Operating system(Mac OS or Windows) and version  
• Computer brand and model  
• Names of CD or DVD drives installed on your computer  
• Amount of memory installed  
• Names of any other devices installed on your computer  
Serial Number Sticker  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contacting Customer Support  
page 27  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
LaCie Technical Support  
LaCie Australia  
LaCie Asia, Singapore and Hong Kong  
Contact Us At:  
Contact Us At:  
LaCie Belgium  
LaCie Canada  
Contact Us At:  
Contact Us At:  
LaCie Denmark  
LaCie Finland  
Contact Us At:  
Contact Us At:  
LaCie France  
LaCie Germany  
Contact Us At:  
Contact Us At:  
LaCie Italy  
LaCie Japan  
Contact Us At:  
Contact Us At:  
LaCie Netherlands  
LaCie Norway  
Contact Us At:  
Contact Us At:  
LaCie Spain  
LaCie Sweden  
Contact Us At:  
Contact Us At:  
LaCie Switzerland  
Contact Us At:  
LaCie United Kingdom & Ireland  
Contact Us At:  
LaCie USA  
LaCie Grand Export  
Contact Us At:  
Contact Us At:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
page 28  
LaCie Brick Hi-Speed USB 2.0  
Desktop Hard Drive User’s Manual  
7. Warranty  
LaCie warrants your drive against any defect in material and workmanship, under normal use, for the period designated on  
your warranty certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its option,  
repair or replace the defective drive.  
This warranty is void if:  
• The drive was operated/stored in abnormal use or maintenance conditions;  
• The drive is repaired, modified or altered, unless such repair, modification or alteration is expressly authorized in writing by  
LaCie;  
• The drive was subjected to abuse, neglect, lightning strike, electrical fault, improper packaging or accident;  
• The drive was installed improperly;  
• The serial number of the drive is defaced or missing;  
• The broken part is a replacement part such as a pickup tray, etc.  
• The tamper seal on the drive casing is broken.  
LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused  
as a result.  
LaCie will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited to,  
damage or loss of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or inconvenience  
caused by service interruptions.  
Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no  
circumstances will LaCie be held liable for the recovery or restoration of this data.  
Under no circumstances will any person be entitled to any sum greater than the purchase price paid for the drive.  
To obtain warranty service, call LaCie Technical Support. You will be asked to provide your LaCie products serial number, and  
you may be asked to furnish proof of purchase to confirm that the drive is still under warranty.  
All drives returned to LaCie must be securely packaged in their original box and shipped with postage prepaid.  
Register online for free technical support: www.lacie.com/register  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks Switch KS 116 User Manual
La Crosse Technology Weather Radio 512 807 User Manual
Lathem Time Clock PC400TX User Manual
LG Electronics Bluetooth Headset HBS 730 User Manual
LG Electronics Cell Phone AS740 User Manual
LG Electronics Microwave Oven LRMM1430SB User Manual
Lochinvar Water Pump BLT2026 User Manual
Logical Solutions Video Gaming Accessories SCS User Manual
Melissa Blood Pressure Monitor 630 016 User Manual
Mellerware Kitchen Utensil DC002 User Manual