IS Optical Smoke Detector
• Conventional technology
• Optional connection of remote
indicator
• Extremely flat design
• Function testable with test gas
• ATEX certified
Description
The Intrinsically Safe Optical Smoke Detector SLR-E-IS Ex classification. The two LEDs with 360° visibility indi-
uses the scattered light principle and was developed cate the activated condition of the detector. By means
for the detection of smoke particles in explosion-prone of an auxiliary module, the connection to an ADM loop
rooms. The modern design of the sensing chamber al- is possible.
lows to reliably evaluate the characteristics of fire.
A detector function test can be conducted by using test
Conventional technology is used for alarm transmission
to the fire detection control panel. In conjunction with the
Safety Barrier ES58-2, the detector reaches the given
gas. The detector is attached to the IS Detector Base
YBN-R/4IS.
Specifications
Ignition protection
Ex classification
Current consumption at 24V
Ambient temperature
Relative humidity
Dimensions ø × H (incl. base)
Colour
intrinsically safe
EEx ia IIC T5
typ. 50µA (quiescent)
-10°C to +55°C
10 – 95% (no condensation)
100 × 46 (mm)
cream
Weight
115g
Approval
BAS01ATEX1281
LPCB 164a
Order number
Order name
241090
IS Optical Smoke Detector/Conv. SLR-E-IS
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
SLR-E-IS_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|