Contents
Camera Specifications
• IP Dome Camera*
• Mounting Screw Kit*
• Mounting Template*
Image Sensor
Video Format
Effective Pixels
Resolution
1/3” Color Image Sensor
NTSC
WEATHERPROOF HIGH DEFINITION
NIGHT VISION IP DOME SECURITY CAMERA
H: 1920 V: 1080
1080P @ 30FPS (Frames Per Second)
Progressive
• 100ft Cat5e Ethernet Cable*
* Per camera.
WARNING - The cameras are only compatible with Lorex LNR200 Series
NVR’s and use PoE for power and data transmission over Ethernet cables. A
power adapter is not required for the use of the camera. Use of the camera
with power adapters or with other, non-approved PoE equipment is not
covered under warranty.
Quick Start Guide
Scan System
Sync System
Iris
English Version 3.0
Internal
Auto Iris
AES Shutter Speed
Min. Illumination
1/25 ~ 1/100,000 Sec.
Features
• Full HD 1080P resolution
• Plug-and-play Power over Ethernet (PoE) connection to NVR
• True Day/Night mode: Picture automatically switches to B&W delivering
better clarity in low light conditions
• 3D DNR - Frame-to-frame Digital Noise Reduction combined with Spatial
Noise Reduction, delivering a cleaner, more accurate image, with better
clarity, sharpness, greater disc space for storage, and improved motion
detection.
• Digital-Wide Dynamic Range backlight compensation provides clear
detailed images where very bright and very dark areas are in the same
field of view and frame of the camera.
• Outstanding Night Vision up to 150ft away in typical night time ambient
lighting and up to 100ft away total darkness*
• Automatic Infrared Filter ensures true & accurate color in all lighting
conditions
• Wide angle 4mm lens for superior detail (75° diagonal FOV)
• Weatherproof (IP66) rated aluminum housing for indoor/outdoor
installations**
• Close-up recognition at night with auto light compensation prevents wash-
out effect
• Anti-glare feature ensures clear images under strong lighting conditions
• Set It and Forget It -Auto-Detect pre-configured cameras***
0.14 Lux without IR LED
0 Lux with IR LED
• H.264 video compression technology
Lens / Lens Type
4mm F1.2 / Fixed
3D-DNR
Digital Noise Reduction
Wide Dynamic Range
FOV (Diagonal)
Digital WDR
75°
Termination
RJ45 10M / 100M Ethernet
30 pieces / 850nm
150ft (45m) / 100ft (30m)
PoE
IR LED Qty. / Type
Night Vision Range*
Power Requirement
Operating Temp. Range
Operating Humidity Range
Indoor/Outdoor**
Weight (including stand)
14° ~ 140°F / –10° ~ 60°C
< 95% RH
Both (IP66)
0.9lbs / 0.4kg
* Stated IR illumination range is based on ideal conditions in typical outdoor night time ambient
lighting and in total darkness. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
Disclaimers:
** Not intended for submersion in water. Installation in a sheltered location recommended.
* Stated IR illumination range is based on ideal conditions in typical outdoor night time ambient
lighting and in total darkness. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
** Not intended for submersion in water. Installation in a sheltered location recommended.
*** 1 minute discovery time when connecting a new camera to NVR.
Dimensions
111mm / 4.4”
Warning/Caution
• Use the camera only with compatible Lorex LNR200 Series NVR’s
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product and handle with care
• Use the camera within given temperature, humidity and voltage levels
noted in Camera Specifications
87mm / 3.4”
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of intense
light
• Periodic cleaning may be required. Use a damp cloth only. Do not use
harsh cleaners or aerosol cleaners
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold separately
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Product Information
User Manuals
Specification Sheets
Software Upgrades
LND2152 SERIES
Installation Tips
• Point the camera where there is the least amount of obstructions (i.e. tree
branches)
Quick Start Guides
Firmware Upgrades
• Install the camera in a location that is difficult for vandals to reach
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered location
recommended
Copyright © 2013 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
Download from Www.Somanuals.com. All Manuals Search And Download.
|