WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES
CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-14311(6)RD/WD-1481RD
WD-12311(6)RD
WD-14312(7)RD/WD-14310(5)RD
WD-12312(7)RD/WD-12310(5)RD
WD-10PFD, 10PFP
WD-14311RDA
WD-1485RD/WD-1488RD
AWD-14312(7)RD
AWD-12312(7)RD
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. SPECIFICATION............................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 6
4. INSTALLATION............................................................................................................................. 7
5. OPERATION................................................................................................................................10
6. WIRING DIAGRAM / PROGRAM CHART...................................................................................12
7. TROUBLE SHOOTING................................................................................................................13
7-1.BEFORE SVC CHECKING..................................................................................................13
7-2.QC TEST MODE..................................................................................................................13
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY.........................................................13
7-4.ERROR DISPLAY ................................................................................................................14
8. ERROR DIAGNOSIS AND CHECK LIST ....................................................................................16
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION...........................................16
8-2. FAULT DIAGNOSIS AND TROUBLE SHOOTING .............................................................19
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................29
10. EXPLODED VIEW AND PARTS LIST .......................................................................................39
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY .........................................................39
10-2. THE EXPLODED VIEW OF CONTROL PANEL AND DISPENSER ASSEMBLY ............40
10-3. THE EXPLODED VIEW OF DRUM AND TUB ASSEMBLY .............................................41
10-4. THE EXPLODED VIEW OF DRYER ................................................................................42
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SPECIFICATION
WD-1481RD/WD-14311RDA,
WD-14311(6)RD/WD-12311(6)RD/
WD-14312(7)RD/WD-12312(7)RD/
WD-14310(5)RD/WD-12310(5)RD/
ITEM
WD-10PFD, 10PFP
WD-14311RD
WD-1485RD
WD-1488RD
AWD-14312(7)RD/AWD-12312(7)RD
POWER SUPPLY
220V-240V~, 50Hz
110V~, 60Hz
PRODUCT WEIGHT
66kg
140W
300W
25W
WASHING
SPIN
ELECTRICITY
FAN MOTOR
DRAIN MOTOR
WASH HEATER
DRY HEATER
WASH
CONSUMPTION
40W
2000W
2100W
1200W
1000W
1500W
45rpm
WD-1481RD/WD-14311RDA/WD-14311(6)RD/WD-14312(7)RD/
WD-14310(5)RD/AWD-14312(7)RD/WD-10PFD/WD-10PFP/WD-1488RD
WD-12311(6)RD/WD-12312(7)RD/WD-12310(5)RD/AWD-12312(7)RD
REVOLUTION
SPEED
400/800/1000/1400 rpm
SPIN
400/800/1000/1200 rpm
0.3-10kgf/cm2 (30-1000kPa)
0.3-10kgf/cm2 (30-800kPa)
0.3-10kgf/cm2 (30-1000kPa)
OPERATION WATER PRESSURE
CONTROL TYPE
WASH CAPACITY
DRY CAPACITY
Electronic
10kg/10.1kg
6kg/10.1kg
8kg/8.5kg/10.1kg(Cotton)
4kg/4.2kg/10.1kg(Cotton)
DIMENSION
600mm(W) 645mm(D) 850mm(H)
WASH PROGRAM
RINSE
Cotton, Cotton-Eco, Synthetic, Delicate, Wool/Silk, Hand Wash, Quick 30, Duvet, Drain
+
++
+
Normal / Rinse / Rinse / Normal+Hold / Rinse +Hold
DOOR SWITCH TYPE
WATER LEVEL
Bi-Metal type
10 steps (by sensor)
From 3 hours to 19 hours
Adapted
RESERVATION
SENSING OF THE LAUNDRY AMOUNT
FUZZY LOGIC
Adapted
DISPLAY OF THE REMAINING TIME
ERROR DIAGNOSIS
POWER AUTO OFF
CHILD LOCK
Adapted
10 items
Adapted
Adapted
AUTO RESTART
Adapted
TIME SAVE
Adapted
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES
Automatic process from washing to drying.
Automatic process from washing to drying can be
selected easily.
Washing capacity : 8kg/8.5kg/10.1kg(Cotton)/10kg
Drying capacity : 4kg/4.2kg/10.1kg(Cotton)/6kg
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Direct Drive system
The advanced Brushless DC motor rotates the Drum directly
without belt and pulley.
Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button to change the program
during operation.
Low noise speed control system
By sensing the amount of load and balance, evenly distributes
load to minimize the spinning noise level.
Auto Restart
Although the washing machine is turned off by a power failure, it
restarts automatically in its stopped process when power is
supplied again. And it will be the same when the machine
unplugged in operation is plugged in again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
water
temperature
washing time
the best
washing
performance
selected
FUZZY
LOGIC
washing
rinsing time
temperature
spin rhythm, time
laundry
amount
SENSING
PROCESSING
DETERMINATION
EFFECT
2-3.WATER LEVEL CONTROL
● This model adopts a pressure sensor which can sense the water level in the tub.
● Water supply is stopped when the water level to the preset level, then washing program proceeds.
● Spinning does not proceed until the water in the tub reduces to a certain level.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. PARTS IDENTIFICATION
약
ꢀꢀꢀꢀ
예
건ꢀ조
탈ꢀ수
약
ꢀꢀꢀꢀꢀꢀ
예
ꢀ추가
헹굼물
헹ꢀ굼
ꢀ추가
헹굼물
세ꢀ탁
ꢀ시간
남은
울
시간선택
란제리
)
m
rp
1400 (
1000
800
강ꢀꢀꢀꢀ
표ꢀꢀꢀꢀ준
력
)
5 (회
합ꢀ섬
이ꢀ불
불ꢀꢀ림
애ꢀꢀ벌
본세탁
소ꢀꢀ량
시간단축
4
3
2
1
다림질(절전)
저ꢀꢀꢀꢀ온
600
400
표ꢀ준
급ꢀ속
헹굼+탈수
절전삶음
탈ꢀ수
탈ꢀ수
헹ꢀ굼
세ꢀ탁
■ ACCESSORIES
Spanner
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. INSTALLATION
ꢀ Before servicing ask troubles of customers
ꢁ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
ꢂ Check the troubles referring to the trouble shooting.
ꢃ Decide service steps referring to disassembly instructions.
ꢄ And then, service and repair.
ꢅ After servicing, operate the appliance whether it works O·Kor NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ADJUST THE
HORIZONTAL
ON FLAT AND FIRM SURFACE
• Remove the transit bolts
• Turn the leveling feet to
(4EA:①)with supplied spanner.
set the appliance horizontally.
• Keep the transit bolts and
spanner for future use.
• Insert the 4 caps
provided into the hole
2
1
• The appliance goes up by
rotating the feet clockwise.
• The appliance come down by
rotating the feet counter
clockwise.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
■ HOW TO CONNECT INLET HOSE
• Check that the rubber packing is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
※ The drain hose should be placed under 100cm from the floor.
■ CONNECT POWER PLUG
· Avoid connecting several electric devices,
It may be the cause of the fire.
· Connect the power plug to the wall outlet.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢆ TEST OPERATION
Preparation for
washing.
Press the POWER button.
Press the Start/Pause
button.
•Connect the power plug to
the outlet.
•Connect the inlet hose.
•In case of Coloreds program.
Check the water heating.
Check automatic reverse
turn.
Check the water supply.
max
·Press the Temp. button
and the present temperature will
be displayed.
·Check if the drum rotates
clockwise and counterclockwise.
·Check if water is supplied
through the detergent dispenser.
Check drain and spin
Power off and open the
door
Water removal
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
·Check drain and spin.
·Power off and then power on.
·Check if the door can be
opened after 3 minutes.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. OPERATION
• Use this option to pre
Press and hold PRE
lock/unlock control.
• Use this button to turn the power
On/Off.
• This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
• When Child lock is se
buttons are disabled
can lock the washer w
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
• Pre Wash: Use this option for loads that need pretreatment. It add 16
minutes prewash and drain.
• Use this button to Start/
Stop the washer.
• Rinse+Spin: Use this option to rinse and then spin.
• Soak: Use this mode to wash normal clothes or think and heavy
clothes which are excessively dirty.
• Spin Only: When you want Spin only, select this option.
• Dry Only: When you want Dry only, select this option.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• TIME DELAY
event unwanted use of the washer.
WASH button for 3 seconds to
• Allows the start of any cycle
to be delayed for 3~19
hours.
• These lights show which portion
of the cycle the washer is
operating.
et, CHILD LOCK lights and all
except the Power
button. You
while it is operating.
• INTENSIVE
• If the laundry is heavily
soiled “Intenive” option is
effective.
• By selecting the Intensive
option, the wash time may
be extended, depending
on the program selected.
• To use this option press
the Intensive button once
before the wash program
is started.
• Rinse, Spin, Temp. Button
• DRY Button
• Dry programs selected by pressing the Dry button.
• Select a water temperature based on the type
of load you are washing.
• By pressing the button [Cupboard Very Time
-
-
-
Low Temp. Iron] can be selected.
-
• To change the spin speed, press the Spin
Speed button repeatedly to cycle through
available options.
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is
on.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. WIRING DIAGRAM / PROGRAM CHART
About 1:50
About 1:15
About 55
About 1:05
About 1:00
About 30
About 2:00
About 2:50
About 33
About 46
About 28
About 17
About 30
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLE SHOOTING
7-1.BEFORE SVC CHECKING
■ Be careful of electric shock or disconnecting the parts while trouble shooting.
■ Voltage of each terminal in 220-240V~ and DC while applying an electric current.
7-2.QC TEST MODE.
①
②
③
Pressing Rinse, and Spin button simultaneously.
Press the Power
button, while the above condition.
Press the Start/Pause button as follows.
Number of times the
Start/Pause button is pressed
Check Point
Display Status
None
1 time
Turns on all lamps and locks the door.
Tumble clockwise.
rpm (40~50)
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
12 times
Low speed Spin.
rpm (600~650)
High speed Spin.
rpm (1300~1350)
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for dry water turns on.
Tumble counterclockwise.
Heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on.
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
rpm (40~50)
Water temperature
Water level frequency (25~65)
Water level frequency (25~65)
Turn off all lamps.
Power off and unlock the door.
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
✽ Press the Rinse and Spin button simultaneously.
The digits means water level frequency(10-1 kHz)
ex) 241 : Water level frequency = 241× 10-1 kHz
=24.1 kHz
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
■ Thermistor in tub : Press the [Temp.] button.
■ Thermistor in dry duct : Press the [Dry] button.
■ Thermistor in condensing duct : Press the [Intensive] and [Spin] button simultaneously.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5.ERROR DISPLAY.
• If you press the Start/Pause button in error condition, any error except ‘ ’ will disappear and the
machine will change into pause status.
• In case of『 』,『 』,『
』, if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case of『 』, power will not be turned off.
ERROR
SYMPTOM
CAUSE
WATER INLET
ERROR
• Not reached to the water level(246)within 8
minutes after water supplied or not reached to
the preset water level within 25 minutes.
1
DRAIN ERROR
• Not fully drained within 10 minutes.
• Water is over flowing(over 8 level).
2
3
OVERFLOW
ERROR
※ If
is displayed, drain pump operates to
drain water automatically.
SENSOR PRESSURE
S/W ERROR
• The sensor pressure switch is out of order.
4
5
• In case of operating the reservation function or
the other function with door opened. Close the
door, then the error display is resolved.
• The door switch is out of order.
DOOR OPEN
ERROR
• The appliance is tilted.
6
7
IMBALANCE
ERROR
• Laundry is gatherd to one side.
• The THERMISTOR is out of order.
HEATING
ERROR
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR SYMPTOM
CAUSE
• MAIN PWB ASSEMBLY is out of order
☞ Replace the MAIN PWB ASSEMBLY
• Winding in the STATOR ASSEMBLY is short-circuited.
☞ Replace the STATOR ASSEMBLY
8
CURRENT
ERROR
• “
” is dispplayed during a high spin
☞ Replace the LEAD WIRE ASSEMBLY (MOTOR)
• The connector in the LEAD WIRE ASSEMBLY is not connected to
the connnector of STATOR ASSEMBLY
MOTOR
ERROR
9
☞ Reconnect or repair the connector
• The hall sensor is out of order/defective.
☞ Replace the STATOR ASSEMBLY
• The Dry Heater is out of order
DRY
10
☞ Replace the Dry Heater
HEATOR
ERROR
• The Connector of the Dry Heater is not connected properly to the
connector in the Main PWB ASSEMBLY
☞ Reconnect or repair the connector
• The Dry fan motor is out of order
☞ Replace the fan Motor.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
SYMPTOM
GUIDE FOR SERVICE CALL
NO POWER
Is the power plug connected firmly to
220-240V~ outlet?
Power failure? or Breaker opened?
Visit to check
Water inlet trouble
Is "
" displayed?
Is the tap opened?
Is the tap frozen?
Is the water supply shut-off?
Clean the filter of
inlet valve
Is filter in the inlet valve clogged with
foreign material?
Visit to check
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
• Door does not open
• Error displayed on
the program
Started with door opened?
YES
Close the door
NO
Visit to check
.
Check if the door switch is O K.
• DRAIN TROUBLE
Is "
" displayed?
YES
Is the debris filter clogged with foreign
material such as pin, coin and etc.?
Clean up
the filter.
YES
NO
Is the drain hose frozen with water,
kinked or crushed?
NO
Visit to check
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
Is low-sudsing detergent for the drum
。Suds overflow from the
appliance.
washing machine used?
(In this condition, wash and
spin do not operate
normally)
YES
LOW-SUDSING
Is the proper amount of detergent used
as recommended?
YES
Recommend to reduce the using amount
of detergent.
ꢇ This appliance has the automatic suds sensing function which
operates under much suds condition for good rinse and
preventing overflow.
ꢇ When much suds are sensed, suds removing function such as
drain, water input and pause will operate without rotating the
drum.
。No effect of softener
Is softener put in the correct compartment of
the drawer?
YES
Is the drawer closed during wash?
YES
Is the softener cap clogged?
YES
Explain how to use softener
< Clean the compartment for softener >
Visit to check
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2.FAULT DIAGNOSIS AND TROUBLE SHOOTING
CAUTION
1. Be careful of electric shock or disconnecting the parts while trouble shooting.
2. First of all, check the connection of each part terminal with wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, Put in the connectors correctly.
NO POWER
When measuring the voltage of the outlet,
Check the fuse?
NO
is the voltage AC 220-240V~?
YES
Is the led(1) on?
Replace MAIN PWB
ASSEMBLY
NO
<PWB ASSEMBLY (MAIN)>
YES
Is connector(2) disconnected or
Reconnect the PWB
ASSEMBLY
YES
disassembled?
<PWB ASSEMBLY (MAIN)>
NO
Reconnect the PWB
ASSEMBLY
Is wire of the PWB ASSEMBLY disconnected?
YES
NO
Replace PWB ASSEMBLY
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NO WATER SUPPLY
Is water supply shut-off?
Is the tap opened?
Open the tap.
Check the AIR CHAMBER
and the tube clogged
with impurity.
When you press both Rinse button and Spin button
simultaneously, is the water level frequency below
240?
Is the inlet valve filter clogged with impurity?
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
Is resistance between each terminal of INLET
VALVE ASSEMBLY is 2~8
kΩ?
Check the voltage of the inlet valve connector
220-240V~.
Replace the MAIN PWB
ASSEMBLY
(Refer to 7-2 QC TEST MODE)
DETERGENT DOES NOT FLOW IN
Refer to
Is water supplied?
「NO WATER SUPPLY」
Check the wiring on the
dispenser.
Are replaceptacles correctly connected to the
terminals of the INLET VALVE ASSEMBLY?
Put the detergent in the
correct position
Is detergent put in the correct compartment of
the drawer?
PRE+MAIN
MAIN WASH
: Detergent
Clean the drawer.
Is the detergent hardened?
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTENER DOES NOT FLOW IN
Refer to
Is water supplied?
NO
「NO WATER SUPPLY」
YES
Check the wiring on the
dispenser.
Are receptacles correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
NO
Wiring diagram
YES
Is softener put in the correct compartment of the
Put it in the correct
compartment.
NO
drawer?
YES
Clean the cap and
drawer.
Is the softener cap clogged?
YES
ABNORMAL SOUND
Fix the bolt tightly.
Is the motor bolt loosened?
YES
YES
NO
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is there friction noise from the motor?
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATING WITHOUT WATER
When pressing Wash and Rinse at the same time
after draining, is the water level frequency 248 ~ 262
or more?
When pressing Rinse, Spin buttons at the same
time while wash, is the water level frequency
between 230 - 243?
Replace the
S.PRESSURE SWITCH
ASSEMBLY
Checking voltage between two pins as press the
POWER button is the voltage 220-240V~?
Replace the MAIN PWB
ASSEMBLY
DRAIN MALFUNCTIONING
Repair the DRAIN HOSE
ASSEMBLY.
Is the drain hose twisted or frozen?
Remove foreign material.
Is the impeller of the drain pump clogged?
Reconnect or repair the
connector
Is the connector disconnected, disassembled?
Repair the DRAIN PUMP
ASSEMBLY.
Is the coil of the drain pump cut-off?
(resistance of coil is 80~150Ω)
Repair the MAIN PWB
ASSEMBLY.
When checking voltage between connectors
(①, ②)on spinning, is the voltage 220-240V~
as the figure?
22
Download from Www.Somanuals.com. All Manuals Search And Download.
AC 220-240V
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
When checking THERMISTOR on the tub is the
THERMISTOR loosened above 2mm from
the rubber?
Push the THERMISTOR
tightly to the rubber.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPIN TROUBLE
Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Wash and Rinse buttons at
the same time on the program.
NO
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
YES
When pressing Rinse, Spin and POWER buttons at
the same time after power off, press the Start/Pause
button 1 times, is the drum low speed spin?
Normal
YES
YES
NO
Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)]
Correct the connector.
NO
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Replace the STATOR
ASSEMBLY
NO
① ② ③
Resistance of terminal:
①~② ②~③ ③~①
Ω
Ω
/
/
: About 5 ~15
(1)
YES
Replace the MAIN PWB ASSEMBLY
Does the spring of Latch Hook actuate?
Replace Door Assembly.
Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Red 3 pin, Yellow 4 pin and
white 3 pin connector (1)).
Is there clicking sound once or twice when the
START/PAUSE button is pressed to start the cycle?
Is DOOR SWITCH ASSEMBLY broken?
Replace the DOOR
SWITCH ASSEMBLY.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
[dHE] ERROR DISPLAY
Dry duct
Replace the thermistor.
(6322FR2046B)
~
NO
YES
Condensing
duct
CHECK FOR DRY HEATER TROUBLE
CHECK FOR DRY FAN MOTOR TROUBLE
Disassemble the cabinet cover and
Thermistor
condensing bellows.
Is there any foreign object in condensing
bellows.
Clean the bellows
YES
NO
Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
20~30
Black
Yellow
27
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9. DISASSEMBLY INSTRUCTIONS
✽
Disassemble and repair the parts after pulling out power cord from the outlet.
CONTROL PANEL
① Unscrew the screws on the top plate.
PLATE ASSEMBLY(TOP)
② The plate assembly(Top) is pulled back and
then upward to arrow direction.
③ The cover(Inner) is disassembled.
① The PWB assembly(Display) connectors are
disconnected.
Hook
② Pull out drawer, three screws are unscrewed.
③ Push two upper hooks and pull the control
panel forward.
PANEL ASSEMBLY(CONTROL)
① The PWB assembly(Display) is disconnected.
② When 6 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
PWB ASSEMBLY(DISPLAY)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PWB ASSEMBLY(MAIN)
① The back cover is removed.
② Two screws are unscrewed.
③ Disconnect connector from the wiring.
④ Pull the PWB assembly (Main) to arrow
direction.
DISPENSER ASSEMBLY
① The plate assembly(Top)and the
cover(lnner)are disassembled.
② Pull the drawer to arrow direction.
③ Two screws are unscrewed.
DRAWER
① The hose clamps and the hose are
disassembled.
② The ventilation bellows are disassembled on
the tub.
DISPENSER ASSEMBLY
30
Download from Www.Somanuals.com. All Manuals Search And Download.
INLET VALVE
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
2
holder.
1
ꢁWhen reconnecting the connector
VALVE
VALVE
VALVE
VALVE ®È (NORMAL-WASH)
VALVE
①
②
③
(DRY)
YL/BK - BK
4
(PRE-WASH)
GY/WH - BK
3
(NORMAL-WASH)
WH/BK - BK
BL/RD - BK
BL/RD - BK
④
(HOT)
DOOR
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Removing method of remained water
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
CAP (REMAINING HOSE)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
GASKET ASSEMBLY
① The cabinet gasket clamp is released.
② Two screws are unscrewed from the cabinet
cover.
① Pull plat(-) screwdriver or pully knife into the
both sides of filter cover, and pull in out.
① Unscrew the screw from the lower side of the
cabinet cover.
① Unscrew the 2 screw from upper of the cabinet
cover.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
① Disassemble the clamp assembly.
Tub Gasket
Clamp
① Remove dry gasket clamp by loosening the
screw.
① When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
Drain Hole
33
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
Rotor
Bolt
(ROTORꢀASSEMBLY)ꢀ
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR
(STATORꢀASSEMBLY)ꢀ
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
Hinge
(Damper)
(To arrow direction)
Friction
Damper
(FRICTIONꢀDAMPER)ꢀ
34
Download from Www.Somanuals.com. All Manuals Search And Download.
PUMP
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
HEATER
① Loosen the nut.
② Remove washing heater by pulling out.
Washing
Heater
Nut
Ring Terminal
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
THERMISTOR
① Pull it out by holding the thermistor bracket.
ꢁ If holding the wire and pulling out it, it may be
broken.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCH ASSY, DOOR LOCK
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The door lock S/W is disconnected form the
wiring connector and the strap.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
① Remove washing heater.
② Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DRY DUCT
① Remove 6 screws and dry fan assembly.
Dry fan
Ass'y
② Remove 7 screws and dry duct upper.
Dry Duct
Upper
① Remove 2 screws and dry heater.
Thermostat
② Remove thermostat.
Dry Heater
CONDENSING DUCT
① Remove 17 screws from Dry duct upper and
Dry fan Assembly.
① Remove 5 screws and condensing duct.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
10. EXPLODED VIEW AND PART LIST
10-1.THE PART LIST OF CABINET ASSEMBLY
A154
A153
A110
A140
A152
A151
A101
A102
A104
A120
A150
A103
A141
A131
A100
A485
A430
A130
A440
A134
A133
A450
A410
A200
A303
A300
A310
A275
A276
A201
A220
A240
A274
A272
A270
38
Download from Www.Somanuals.com. All Manuals Search And Download.
10-2 THE EXPLODED VIEW OF CONTROL PANEL &
DISPENSER ASSEMBLY
F436
F324
F300
F462
F322
F321
F170
F160
F320
F466
F432
F430
F225
F441
F220
F120
F215
F110
F210
F130
39
Download from Www.Somanuals.com. All Manuals Search And Download.
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
K143
K360
K350
K123
K351
F140
K411
K410
K122
K121
F465
K125
F310
F464
F463
K146
K320
K310
K111
M105
K110
K141
K311
K140
K105
K410
K115
K130
K135
K610
K512
K510
K560
K611
K530
K131
F145
K340
F467
K550
K520
F468
F461
K540
K344
K346
K342
40
Download from Www.Somanuals.com. All Manuals Search And Download.
10-4 THE EXPLODED VIEW OF DRYER
M100
M240
M130
M120
M111
M110
M216
M210
M230
M215
M101
M220
41
Download from Www.Somanuals.com. All Manuals Search And Download.
|