LG Electronics CRT Television 30FZ1DC 32FZ1DC UB User Manual

Color television  
OWNER’S MANUAL  
MODELS: 30FZ1DC  
32FZ1DC-UB  
R
TruSurround XT  
Please read this manual carefully and completely before  
operating your TV.  
Retain this manual for future reference.  
Record model number and serial number of the TV in the  
spaces provided below.  
See the label attached on the back cover and relate this  
information to your dealer if you require service.  
Model Number :  
Serial Number :  
LG Electronics U.S.A., Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
IMPORTANT SAFETY INSTRUCTIONS  
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or  
sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa-  
ratus.  
This information shall be given in a language acceptable to the country where the apparatus is intended to be used.  
The important safety instructions shall be entitled “Important Safety Instructions. The following safety instructions shall be  
included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by  
adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing  
that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction :  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-  
fiers)that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or  
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-  
trician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appara-  
tus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
PORTABLE CART WARNING  
(Continued on next page)  
P A G E 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.  
15. CAUTION concerning the Power Cord :  
Most appliances recommend they be placed upon a dedicated circuit; that  
is, a single outlet circuit which powers only that appliance and has no  
additional outlets or branch circuits. Check the specification page of  
this owner's manual to be certain.  
Do not overload wall outlets. Overloaded wall outlets, loose or damaged  
wall outlets, extension cords, frayed power cords, or damaged or  
cracked wire insulation are dangerous. Any of these conditions could  
result in electric shock or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage or deterioration,  
unplug it, discontinue use of the appliance, and have the cord replaced  
with an exact replacement part by an authorized servicer.  
Protect the power cord from physical or mechanical abuse, such as being  
twisted, kinked, pinched, closed in a door, or walked upon. Pay  
particular attention to plugs, wall outlets, and the point where the  
cord exits the appliance.  
16. Outdoor Use Marking :  
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.  
17. Wet Location Marking :  
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be  
placed on the apparatus.  
P A G E 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Important Safety Instructions . . . . . . . . . . . . . . . . .3-4  
EZ SoundRite . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . .28  
EZ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Manual Sound Control . . . . . . . . . . . . . . . . . . . . . .29  
TV Speaker on/off Setup . . . . . . . . . . . . . . . . . . . . .29  
Front Surround . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Step 1. Hook Up TV  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . .6  
Rear Connections Panel . . . . . . . . . . . . . . . . . . . . . . .7  
Front Connections Panel (FRONT VIDEO) . . . . . . . . . . . .8 TIME Menu  
ANT/Cable Service Hookup . . . . . . . . . . . . . . . . . . . . .9  
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . .10  
VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Set-top Box Hookup . . . . . . . . . . . . . . . . . . . . . . . .13  
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . .14  
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Remote Control Functions in TV Mode . . . . . . . . . . .16-17  
Turning the TV on . . . . . . . . . . . . . . . . . . . . . . . . . .18  
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .18  
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . .31  
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . .32  
TV Turn Off Time Setup . . . . . . . . . . . . . . . . . . . . .33  
TV Turn On Time Setup . . . . . . . . . . . . . . . . . . . . . .34  
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . . . . .35  
Auto off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
OPTION Menu  
Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . . . .37  
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Caption Option Menu . . . . . . . . . . . . . . . . . . . . . . .40  
On-Screen Menu Languages . . . . . . . . . . . . . . . . . . .41  
Velocity Modulation . . . . . . . . . . . . . . . . . . . . . . . .42  
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Cinema 3:2 Mode Setup . . . . . . . . . . . . . . . . . . . . .43  
EZ Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Step 2. Customize your TV’s Features  
SETUP Menu  
EZ Scan (Channel Search) . . . . . . . . . . . . . . . . . . . .19  
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
DTV Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Degaussing the screen . . . . . . . . . . . . . . . . . . . . . .21  
Channel Label Setup . . . . . . . . . . . . . . . . . . . . . . .22  
Input Source Selection . . . . . . . . . . . . . . . . . . . . . 23  
LOCK Menu  
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . .45-46  
VIDEO Menu  
Step 3. Miscellaneous  
EZ Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Manual Video Control . . . . . . . . . . . . . . . . . . . . . . .25  
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . .26  
XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Video Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Programming the Remote . . . . . . . . . . . . . . . . . . . . .47  
Programming Codes . . . . . . . . . . . . . . . . . . . . . .48-50  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .51-52  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .53-54  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56  
Product Specifications . . . . . . . . . . . . . . . . . . . . . .57  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
AUDIO Menu  
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Note: Design and specifications are subject to change without prior notice.  
P A G E 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Controls  
- Here shown may be somewhat different from your TV.  
VOL  
CH  
TV/VIDEO  
MENU  
5
1
3
6
4
2
7
power  
1
2
Standby indicator (Illuminates brightly when the TV is  
in standby mode. Dims when the TV is switched on.)  
Remote control sensor  
TV/VIDEO  
3
4
menu  
5
6
vol left/ right  
Volume(G) button increases the sound level and vol-  
ume(F) button decreases the sound level.  
ch (Channel) up / down  
7
These buttons work just as they do on your  
remote control.  
P A G E 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Connections Panel  
- Connecting external equipment to your TV.  
- Here shown may be somewhat different from your TV.  
CALIBRATION  
RF Connectors:  
Antenna Input,  
Used to connect  
cable or antenna sig-  
nals to the television,  
either directly or  
through your cable  
box.  
Digital Audio  
Output Optical  
Connects to external  
audio equipment  
like a home theater  
system.  
ANTENNA  
DIGITAL  
AUDIO OUTPUT  
OPTICAL  
+75  
COMPONENT1  
COMPONENT2  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
(480i/480p/720p/1080i)  
Digital Audio Input  
Optical  
Connects to digital  
audio from various  
types of equipment.  
R
R
AUDIO  
L
AUDIO  
L
AUDIO  
VIDEO L(MONO)  
R
PR  
PR  
IN3  
HDMI/DVI  
S-VIDEO  
INPUT  
Left/Right Audio  
PB  
Y
PB  
Y
IN2  
IN1  
Used for stereo sound  
from various types of  
equipment.  
HDMI/DVI Input  
Used to connect  
from a DTV source.  
DVD/DTV INPUT  
Y, PB, PR  
DVD Component Video and HD  
Component Video  
Component Left/Right  
Audio  
Used for stereo sound from  
S-Video In  
Video 1, 2 and 3 Inputs  
A connection available  
with some high-end  
equipment that provides  
even better picture  
Some top-of-the-line DVD players use  
what is called component video,for  
extremely accurate picture reproduc-  
tion. Refer to your DVD manual for  
further information.  
Connects the video signals  
from various types of  
equipment.  
various types of equipment.  
quality for Video 1, 2.  
Mini glossary  
JACK  
A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color-  
coded.  
SIGNAL  
Picture and sound traveling through cable, or over the air, to your television screen.  
P A G E 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Connections Panel  
There are four jacks on the lower-right front  
front of your TV that make connecting  
Audio/Video devices like video games and  
camcorders very simple.  
The jacks are like those found on the back  
jack connection panel. This means that most  
equipment that connects to those types of  
jacks on the rear jackpack, may be connected  
to the Front connection panel (Front Video).  
To use the Front jacks as the signal source,  
select them using Main input menu as  
described on page 23. They will be named  
Front Videoin the Main input menu.  
When you select Front video or  
Front S-Video, the Front Audio  
inputs are automatically selected  
as well.  
Front A/V Panel  
S-Video  
A connection available on some very  
high-end equipment that provides  
better picture quality than video  
input.  
Do not connect to both Video and  
S-Video at the same time.  
Connect either Video or S-Video  
only.  
FRONT VIDEO  
Video in  
Left/Right Audio  
Connects the video  
signals from any  
piece of equipment.  
Used for stereo sound  
from various types of  
equipment.  
Mini glossary  
A/V CABLES Audio/Video cables. Three cable connectorRight audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo  
playback of videocassettes and for higher quality picture and sound from other A/V devices.  
A/V DEVICE Any device that produces video (picture) and/or audio (sound) (VCR, DVD, cable box, or television).  
P A G E 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna / Cable Service Hookup  
Cable TV  
Wall jack  
Antenna  
Connect an antenna and/or cable service to  
your TV as shown.  
1
RF coaxial wire  
(75 ohm)  
RF coaxial wire  
(75 ohm)  
Turn to page 19 to do a channel search  
with EZ Scan.  
2
CALIBRATION  
If you receive your RF signal through an  
antenna that is several years old and con-  
nects with two small prongs, you will need to  
purchase a 300 to 75 ohm adapter. It should  
be available from your local  
ANTENNA  
+75  
DIGITAL  
AUDIO OUTPUT  
OPTICAL  
electronics dealer.  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
We recommend using a 75 ohm cable for  
your antenna connection in order to prevent  
interference.  
Mini glossary  
TV  
CATV  
OVER-THE-AIR SIGNALS  
CABLE SIGNALS  
DTV  
CADTV  
DIGITAL OVER-THE-AIR SIGNALS  
DIGITAL CABLE SIGNALS  
Combined signals  
TV/CATV/DTV  
TV/CATV/CADTV  
Over-the-air, cable, and digital over-the-air signals  
Over-the-air, cable, and digital cable signals  
CAUTION : If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches. The TV will let  
you know when the analog, cable, and digital channel scans are complete.  
For best signal reception, it is recommended to have your Antenna professionally adjusted.  
P A G E 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Box Connections  
Cable TV Wall  
jack panel  
Locate the output jack on the back of  
your cable box. Connect this to the Cable  
jack on the back of your TV.  
1
In  
Out  
Output  
Switch  
3
4
Or find the composite video and audio  
jacks on the back of your cable box, and  
connect them following the instructions  
provided with your equipment.  
RF coaxial wire  
(75 ohm)  
This can be combined with any other  
equipment you may want to hook up.  
ANTENNA  
+75  
COMPONENT1  
COMPONENT2  
(480i/480p/720p/1080i)  
R
R
AUDIO  
L
AUDIO  
L
Cable box  
AUDIO  
VIDEO L(MONO)  
R
PR  
PR  
IN3  
S-VIDEO  
INPUT  
Audio  
Video  
PB  
Y
PB  
Y
IN2  
IN1  
R
L
TV  
VCR  
DVD/DTV INPUT  
If you’re using a cable box, leave the TV on  
channel 3 or 4 and use your cable box to  
change channels.  
P A G E 1 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Connections  
Locate the Cable jack on the back  
of your TV. Connect this to out  
jack on the back of your VCR.  
1
Or find the composite video and  
audio jacks on the back of your  
VCR, and connect them following  
the instructions provided with  
your equipment.  
Cable TV Wall  
jack panel  
ANTENNA  
+75  
Antenna  
You may connect either the com-  
posite video or the S-Video cables  
to your TV. (Do not connect BOTH  
the composite and the S- Video  
cables. In the event that you con-  
nect both composite and the S-  
Video cables, only the S-Video will  
work.)  
COMPONENT1  
COMPONENT2  
Round wire  
(75 ohm)  
(480i/480p/720p/1080i)  
RF coaxial wire  
(75 ohm)  
R
R
AUDIO  
L
AUDIO  
L
AUDIO  
VIDEO L(MONO)  
R
PR  
PR  
IN3  
IN2  
IN1  
Back AV panel  
S-VIDEO  
INPUT  
PB  
Y
PB  
Y
Output  
Switch  
In  
3
4
Out  
S-Video  
Audio  
Video  
DVD/DTV INPUT  
R
L
or  
VCR  
A/V cables  
not included  
with TV  
To hear stereo sound from cable or your VCR,  
you will need to connect A/V cables as well as  
the wire that runs from the VCR to your TV.  
If you want to receive your signals on Channel  
3 or 4, locate the Out to TV jack on your VCR.  
Connect a cable from the Out to TV jack to the  
Antenna jack on the back of your TV.  
P A G E 1 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Player  
CALIBRATION  
DVD player  
ANTENNA  
+75  
DIGITAL  
AUDIO OUTPUT  
OPTICAL  
Find the component or S-Video  
1
2
jacks for video connections,  
depending on your DVD connec-  
tors. Then make the correspond-  
ing audio connections. See the  
diagram for either set up.  
Back AV panel  
COMPONENT1  
COMPONENT2  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
(480i/480p/720p/1080i)  
R
R
AUDIO  
L
Audio  
L
Digital Audio  
Optical  
R
Component Video  
AUDIO  
L
PR  
PR  
HDMI/DVI  
You may connect either the  
composite video or the S-Video  
cables to your TV. Do not con-  
nect both the composite and  
the S-Video.  
PB  
Y
PB  
Y
A/V cables  
not included  
with TV  
DVD/DTV INPUT  
DVD player  
Back AV panel  
Audio  
L
R
S-Video  
CALIBRATION  
ANTENNA  
+75  
DIGITAL  
or  
Some high-end DVD players use  
a picture reproduction system  
called “component video.” If  
your DVD player has component  
output, use the connectors  
marked “Component 1 or 2” on  
the jack panel. Please refer to  
your DVD manual for proper  
installation.  
AUDIO OUTPUT  
OPTICAL  
COMPONENT1  
COMPONENT2  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
(480i/480p/720p/1080i)  
R
R
AUDIO  
L
AUDIO  
L
AUDIO  
VIDEO L(MONO)  
R
A/V cables  
not included  
with TV  
IN3  
PR  
PR  
HDMI/DVI  
S-VIDEO  
INPU
PB  
Y
PB  
Y
IN2  
IN1  
DVD/DTV INPUT  
Component Input ports  
You can get better picture quality if you  
connect a DVD player using the component  
input ports as shown below.  
Component input jacks  
Y
PB  
PR  
on the TV  
Pr  
R-Y  
Cr  
Y
Y
Y
Y
Pb  
B-Y  
Cb  
Video output jacks  
of DVD player  
PR  
PB  
Mini glossary  
COMPONENT VIDEO  
Some video equipment uses three separate lines (Y, PB, PR) to more precisely reproduce images. Your manual will explain how  
this relates to your equipment.  
P A G E 1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-top box Hookup  
Find the audio and Y, PB, PR jacks or  
CALIBRATION  
1
2
HDMI/DVI output port on the back of  
your set-top box and connect them fol-  
lowing the instructions provided with  
your equipment.  
Set-top Box  
ANTENNA  
+75  
Digital Audio  
Optical Output  
DIGITAL  
AUDIO OUTPUT  
OPTICAL  
COMPONENT1  
COMPONENT2  
Connect these cables to your TV as  
shown.  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
(480i/480p/720p/1080i)  
or  
R
R
AUDIO  
L
AUDIO  
L
PR  
PR  
HDMI/DVI  
Set-top Box  
PB  
Y
PB  
Y
Component Out  
Pb Pr  
Audio  
DVD/DTV INPUT  
Y
L
R
or  
Set-top Box  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
HDMI/DVI  
The DTV shows the sharpest picture in 720p/1080i mode.  
Component 1 (or 2) Input  
HDMI/DVI  
Y
PB  
PR  
1920x1080i  
1280x720p  
720x480p  
1920X1080i  
1280X720p  
720X480p  
720X480i  
P A G E 1 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Audio Output  
Send the TVs audio out to external audio equipment (stereo system) via  
the Digital Audio Output Optical port.  
Connect one end of an optical cable to  
the TV Digital Audio Optical Output port.  
1
Connect the other end of the optical cable  
to the digital audio optical input on the  
audio equipment.  
2
See the external audio equipment instruc-  
tion manual for operation.  
CALIBRATION  
ANTENNA  
+75  
DIGITAL  
AUDIO OUTPUT  
OPTICAL  
Caution: Do not look into the optical output  
port. Looking at the laser beam may damage  
your vision.  
DIGITAL  
AUDIO INPUT  
OPTICAL  
(DVI)  
HDMI/DVI  
Digital Audio  
Optical Input  
Digital Audio  
Equipment  
P A G E 1 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI  
- HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."  
- This DTV can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).  
- This DTV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for DTV(480p, 720p, 1080i) modes.  
- When you Connect with HDMI Source Devices (DVD Player or Set Top Box) supporting Auto HDMI function, automatically, support Plug & Play  
and then set the HDMI Source Devices(1920 x 1080i). After reading in HDMI Source Devices using Display Data Channel(DDC) Protocol, EDID  
stored in DTV is used. If HDMI Source Devices not supported Auto HDMI/DVI is been, the Resolution is setted, manually.  
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.  
- When Source Devices have DVI Output Connector, you must connect audio with separated cable. (Refer to <How to connect>)  
- The HDMI is not supported in 480i source.  
How to connect  
1. When Source Devices(DVD Player or Set Top Box) support HDMI.  
- If Source Devices have HDMI Output Connector, Source Devices connect to DTV with HDMI Cable .(not supplied with the product).  
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1920 x 1080i. But if not, resolution divert  
Manually Setting for reference Manual of Source Devices.  
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.  
- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.  
2. When Source Devices(DVD Player or Set Top Box) supports DVI.  
- If Source Devices have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product).  
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1920 x 1080i. But if not, resolution divert  
Manually Setting for reference Manual of Source Devices.  
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.  
- In this case, Audio use other cable. When Source Devices have Fiber Optic Digital Audio Output Connector, Digital Audio DVI Input(DVI) of  
DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when Source Devices have Analog Audio Output Connector,  
RGB/DVI Audio Input of DTV connect to Audio Cable (not supplied with the product). And then you can listen to normal Audio.  
Reference  
Cable sample  
HDMI to DVI Cable (not supplied with the product)  
HDMI Cable (not supplied with the product)  
How to use  
1. Connect the HDMI Source Devices (DVD Player or Set Top Box) and the TV set.  
2. Turn on the display by pressing the ON/OFF button on the TV set and HDMI Source Devices remote control.  
3. Check the image on your TV set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI  
Source Devices. If noise is present, change the HDMI Source Devices to another resolution, change the refresh rate or adjust the bright-  
ness and contrast on the menu until the picture is clear.  
P A G E 1 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions in TV Mode  
MODE INDICATOR  
LIGHTS  
MODE  
Selects the remote operating mode:  
TV, VCR, Cable, DVD or Satellite.  
Select other operating modes, for  
the remote to operate external  
devices.  
Show active remote mode  
every time any button is  
pressed.  
VCR CABLE DVD  
TV  
SAT  
TV/VIDEO  
Selects: Antenna, Cable, Video1,  
Video2, Front video, Component 1-2  
and HDMI/DVI input sources.  
MODE  
POWER  
TV/VIDEO  
VIDEO1  
Selects the Video1 input source.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
COMP2  
Selects the Component 2 input  
source.  
MUTE  
Switches the Mute or the EZ mute.  
Mute: The sound is off. EZ mute: Turns  
the sound off, and displays the caption.  
1
4
7
2
5
8
0
3
6
9
FAV  
Use to scroll the FAV channel  
list.  
EZ SOUND  
Selects the sound appropriate  
for the programs category.  
EZ PIC  
DASH(-)  
FLASHBK  
Adjusts the factory preset picture depending  
on the viewing environment.  
FAV  
MUTE  
RATIO  
Changes the aspect ratio.  
EZ PIC  
EZ SOUND  
VOL  
CH  
SURROUND  
Selects : Off, 3D EchoSound  
System and SRS TruSurround  
XT.  
RATIO FREEZE  
SAP SURROUND  
FREEZE  
Captures and freezes  
the currently-viewed  
picture.  
SAP  
TIMER  
INFO  
CC  
Selects MTS sound: Mono, Stereo,  
and SAP in analog mode.  
Change the audio language in  
DTV mode.  
SIGNAL  
THUMBSTICK  
(UP/DOWN/LEFT/RIGHT/  
)
CC  
Allows you to navigate the on-screen menus  
Lets you select a closed caption  
mode for displaying captioning  
information when provided for  
DTV/Analog signal.  
and to adjust the system settings and prefer-  
D
ences, by moving to an option withF  
G
and  
.
selecting the highlighted option Ewith  
MENU  
EXIT  
EXIT  
MENU  
Brings up the main menu  
to the screen.  
Clears all on-screen displays  
and returns to TV viewing  
from any menu.  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
P A G E 1 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions in TV Mode  
VCR CABLE DVD  
TV  
SAT  
VIDEO2  
Selects the Video2 input source.  
POWER  
Turns your TV or any other  
programmed equipment on or  
off, depending on mode.  
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
COMP1  
Selects the Component 1 input  
source.  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
FRONT  
Selects the front video input source.  
1
4
7
2
5
8
0
3
6
9
HDMI  
Selects the HDMI input source.  
NUMBER KEYPAD  
For direct channel selection and  
programming functions.  
DASH(-)  
Is used to enter a program num-  
ber for multiple program channels  
such as 2-1,2-2,etc.  
DASH(-)  
FLASHBK  
FLASHBK  
Tunes to the previous channel  
viewed.  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
CHANNEL UP/DOWN  
Scrolls through available channels  
present in EZ Scan memory.  
VOL  
CH  
VOLUME UP/DOWN  
Increases/decreases the sound level.  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
INFO  
When you watch the TV, dis-  
plays information on top of the  
screen. Not available in  
SIGNAL  
Displays the digital signal  
strength.  
Component 1-2 and HDMI/DVI.  
ENTER  
When in the menu system and  
other on-screen displays,  
selects highlighted options.  
TIMER  
Lets you select the amount of  
time before your TV turns  
itself off automatically.  
MENU  
EXIT  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
RECORD, PAUSE, REW, FFWD,  
PLAY, STOP  
SKIP LEFT/RIGHT  
Playing CDs: Selects songs.  
Playing DVDs: Selects movie  
chapters.  
Control the functions on your VCR.  
SKIP  
P A G E 1 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning the TV On  
First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode.  
1
2
3
In standby mode to turn TV on, press the POWER, CH +/-, TV/VIDEO, FRONT or number buttons on the  
remote control or TV/VIDEO or CH on the TV.  
/
D E  
Select the viewing source by using TV/VIDEO, COMP, FRONT or HDMI button on the remote control.  
This TV is programmed to remember which mode it was last set to, even if you turn the TV off.  
Note: See page 19 if you have not auto programmed the TV to receive channels in your local broadcast area.  
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.  
If you will be away on vacation, disconnect the power plug from the wall power outlet.  
On-Screen Displays  
This page describes your on-screen display and information banner options.  
Channel Display  
Displays current channel number.  
TV 2-0  
MONO  
Channel Label  
Displays current  
channel label.  
Mute  
10  
10:00 AM  
Time  
Appears when pressing the  
enter button on remote control.  
Volume  
Volume level is displayed  
while adjusting the sound.  
Mute  
Appears when  
sound is muted.  
P A G E 1 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ Scan (Channel Search)  
Automatically finds all channels available  
through antenna or cable inputs, and stores  
them in memory on the channel list.  
Use pages 9-14 to connect external  
1
equipment to your TV. If you have done  
so, plug in your TV to a standard 120V,  
60Hz power outlet.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
3
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
1
4
7
2
5
8
0
3
6
9
If you have done so, remove the back of  
2
the remote and install in two AA batter-  
ies. Make sure batteries are properly  
installed (check the +/symbols).  
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
back of  
remote  
RATIO FREEZE  
SAP SURROUND  
With the remote control in hand, press  
the POWER button to turn your TV on.  
TIMER  
INFO  
CC  
SIGNAL  
3
6
4
5
Press the MENU button on the remote control,  
4
MENU  
EXIT  
then use the UP/DOWN arrow button to select  
4
4
the SETUP menu.  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
Press the RIGHT arrow button to access the  
SETUP menu.  
5
SKIP  
Press ENTER button to begin the channel  
6
search. Note: Allow EZ Scan to complete the  
channel search cycle for Air (TV->CATV->DTV),  
Cable (TV->CATV->CADTV) etc.  
Run EZ Scan again after any  
Antenna/Cable connection changes.  
P A G E 1 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Edit  
Create two different types of channel lists in memory: “Custom  
list” and “Favorite channel list” from the default channel list  
made in the EZ scan menu.  
A custom list can be created by toggling each channel on or off  
with the (Enter) key. Once a channel is highlighted, you will be  
able to see whether the channel is currently added or deleted by  
referring to the small window at the top-left corner of the screen.  
You can create your own favorite channel list with up to 20 chan-  
nels.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Use the FAV button on the remote control when a channel is high-  
lighted, to add or delete the channel in the favorite channel list.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the SETUP menu.  
1
4
7
2
5
8
0
3
6
9
1
Press the RIGHT arrow button to access  
the SETUP menu.  
DASH(-)  
FLASHBK  
2
FAV  
MUTE  
4
Use the UP/DOWN arrow button to select  
EZ PIC  
EZ SOUND  
3
Ch.Edit and then press the RIGHT arrow  
VOL  
CH  
button.  
RATIO FREEZE  
SAP SURROUND  
You will now see a screen filled with  
4
TIMER  
INFO  
CC  
SIGNAL  
channel numbers and a preview picture.  
Use the UP/DOWN and LEFT/RIGHT arrow  
button to select a channel, then use  
4
4
1/3/4  
2/3/4  
the  
button to add or delete it. Press  
FAV to add the channel to the Fav List.  
MENU  
EXIT  
1/5  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
5
5
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4  
SKIP  
CATV is available for 1-135 channel.  
P A G E 2 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTV Signal  
Lets you know how strong your DTV signal is and whether  
you need to adjust your antenna or digital cable input.  
The higher the signal strength, the less likely you are to  
experience degradation.  
Using the SIGNAL button  
Press the SIGNAL button on the remote  
control.  
1
View the on-screen signal strength moni-  
tor to see the quality of the signal being  
received.  
2
Press exit button to return to TV viewing.  
3
Using the menu  
NOT all areas or programs are currently  
available with Digital DTV signals.  
Select the DTV in Input Source on the  
menu, to check the DTV signal.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the SETUP menu.  
1
Press the RIGHT arrow button to access  
the SETUP menu.  
2
Use the UP/DOWN arrow to select the DTV  
Signal. Current signal strength is shown  
on menu.  
3
Press EXIT button to return to TV viewing.  
4
Degaussing the Screen  
The magnetic field of the earth may affect the color puri-  
ty of the picture and other magnetic influences nearby  
may also have an affect on color purity. Even the installa-  
tion direction of the TV set may affect color purity.  
Stripes may appear on the screen or the color may not be  
equal in the corners. You can restore color quality by  
operating the Degauss.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the SETUP menu.  
1
Press the RIGHT arrow button to access  
the SETUP menu.  
2
Use the UP/DOWN arrow button to select  
Degauss, then press the RIGHT arrow  
button to perform the Degauss function.  
If you are unable to correct problem by degaussing,  
try again after about 4 minutes.  
3
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
4
P A G E 2 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Label Setup  
Choose preset labels for your channels.  
Use Channel +/- on your remote control in the Ch Label  
menu to select a channel for labeling, and choose a suit-  
able label for your channel by pressing  
label to the selected channel.  
to set the  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the SETUP menu.  
1
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Press the RIGHT arrow button to access  
the SETUP menu.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
2
3
Use the UP/DOWN arrow button to select  
ch.Label and then press the RIGHT arrow  
button.  
1
4
7
2
5
8
0
3
6
9
You will now see a screen filled with  
Labels and a preview screen. Use channel  
+/- button on your remote control to  
select the a channel to Label.  
4
5
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
Use the UP/DOWN and LEFT/RIGHT arrows  
to select the appropriate label for the  
channel and press to set the Label to  
the selected channel.  
4
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
Repeat 4 and 5 steps until all channels  
are Labeled.  
5
5
6
7
1/3/5  
2/3/5  
7
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
MENU  
EXIT  
1/7  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/5  
The TV displays a short name for a DTV  
channel even if you didn't preset a label  
for the channel.  
SKIP  
P A G E 2 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Source Selection  
Note: Changes the picture source for the screen so you  
can watch your on-air TV, cable TV, VCR, DVD, or  
any other devices that are connected to your TV.  
Using the TV/VIDEO, FRONT, COMP1-2 and HDMI button  
Use the TV/VIDEO, FRONT, COMP1-2, and  
1
HDMI button to select the input source.  
Each time you press TV/VIDEO button, you  
toggle between Antenna, Cable, Video1,  
Video 2, Video3, Front Video, Component1,  
Component 2, and HDMI/DVI.  
Using the menu  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the SETUP menu.  
1
Press the RIGHT arrow button to access  
the Setup menu.  
2
Use the UP/DOWN arrow to select the  
Input Source option.  
3
Press the RIGHT arrow to access the Input  
Source menu, then use the UP/DOWN  
4
arrow button to select the source. Your  
Main picture source options are : Antenna,  
Cable, Video1, Video2, Video3, Front  
video, Component1, Component2, and  
HDMI/DVI.  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
5
P A G E 2 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO Menu  
Each video menu adjustment doesn’t effect other input  
sources. Readjust Video menu for each input source.  
EZ Picture  
This function adjusts the TV to the best picture appear-  
ance. Select the preset value in the EZ Picture menu  
based on the program category.  
Normal, Digital Preset, Night Time, Movie, Weak Signal,  
Video Game, and Sports are preset for good picture quali-  
ty at the factory and cannot be changed.  
When adjusting video options (Contrast, Brightness, Color,  
Sharpness, and Tint) manually, EZ Picture automatically  
changes to ‘Off.  
Using the EZ PIC button  
Choose the Normal option to reset the EZ picture  
options to their factory preset values, or use your  
own settings with Off.  
Use the EZ PIC button to select EZ Picture option.  
1
Each press of the EZ PIC button change the EZ Picture  
option: Off, Normal, Digital Preset, Night Time, Movie,  
Weak Signal, Video Game, and Sports.  
2
Press EXIT to save and return to TV viewing.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Using the menu  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press the MENU button on the remote control,  
1
then use the UP/DOWN arrow button to select  
the VIDEO menu.  
1
4
7
2
5
8
0
3
6
9
Press the RIGHT arrow button to access the  
VIDEO menu.  
2
DASH(-)  
FLASHBK  
Use the UP/DOWN arrows to select the EZ Picture  
option.  
FAV  
MUTE  
3
EZ PIC  
EZ SOUND  
VOL  
CH  
Press the RIGHT arrow to access the EZ Picture  
menu, then use the UP/DOWN arrow button to  
4
RATIO FREEZE  
SAP SURROUND  
select the options: Off, Normal, Digital Preset,  
Night Time, Movie, Weak Signal, Video Game, and  
Sports.  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
Off: Allows you to adjust the picture the way  
you want.  
2/4  
5
Normal: Resets all the options to their preset  
values.  
MENU  
EXIT  
1/5  
1/3/4  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
Other options adjust the picture to the sources  
image.  
SKIP  
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
P A G E 2 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO Menu  
Manual Video Control  
Adjust the picture appearance to suit your preference and  
viewing situations.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the VIDEO menu.  
You can manually adjust the levels of picture quality settings,  
such as Contrast, Brightness, Sharpness, etc.  
1
Press the RIGHT arrow button to access  
the VIDEO menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to select  
one of the following options: Contrast,  
Brightness, Color, Sharpness, or Tint, then  
press the RIGHT arrow button.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Contrast: Adjusts the difference  
between the light and dark levels of  
the picture.  
1
4
7
2
5
8
0
3
6
9
Brightness: Adjusts the white or light  
level of the overall picture.  
DASH(-)  
FLASHBK  
Color: Adjusts the intensity of all col-  
FAV  
MUTE  
ors.  
EZ PIC  
EZ SOUND  
Sharpness: Adjusts the level of crisp-  
ness in the edges between the light  
and dark areas of the picture. The lower  
the level, the softer the image.  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
Tint: Adjusts the balance between the  
red and green levels.  
1/3/4  
2/3/4  
5
4
Use the LEFT/RIGHT arrow button to  
adjust the option to your preference. Use  
the UP/DOWN arrow button to select  
another option.  
4
MENU  
EXIT  
1/5  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
5
SKIP  
P A G E 2 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO Menu  
Color Temperature  
Lets you choose one of three automatic color adjustments. Set this to warm for hotter colors such as red, or set to cool for less intense  
colors with more blue.  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the VIDEO menu.  
1
2
3
4
Press the RIGHT arrow button to access the VIDEO  
menu.  
Use the UP/DOWN arrow button to select Color  
Temperature, and then press the RIGHT arrow button.  
Use the UP/DOWN arrow button to select Warm,  
Medium, or Cool.  
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
XD  
- XD is LG Electronics unique picture improving technology to display a real  
HD source through an advanced digital signal processing algorithm.  
- When selecting EZ PIC options (Normal, Digital Preset, Night Time, Movie,  
Weak Signal, Video Game, and Sports), XD is automatically change to On.  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the VIDEO menu.  
1
Press the RIGHT arrow button to access the VIDEO  
menu.  
2
Use the UP/DOWN arrow button to select XD, and then  
press the RIGHT arrow button.  
3
Use the UP/DOWN arrow button to select Off or On.  
4
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
Video Preset  
This is the function to quickly reset every Video menu  
option to their factory preset values.  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the VIDEO menu.  
1
Press the RIGHT arrow button to access the VIDEO  
menu.  
2
Use the UP/DOWN arrow button to select Video Preset.  
3
Use the RIGHT arrow button to preset the video config-  
uration.  
4
P A G E 2 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO Menu  
Audio Language  
Other languages may be available only if a digital signal is being sent by the broadcasting station.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the AUDIO menu.  
1
Press the RIGHT arrow button to access  
the AUDIO menu.  
2
3
Use the UP/DOWN arrow button to select  
Audio Language, then press the RIGHT  
arrow button.  
Use the UP/DOWN arrow button to select  
the language you wish.  
4
5
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
EZ SoundRite  
Scans for changes in sound level during commercials, then adjusts the sound to match the current audio level. This will make sure  
that the volume level will be consistent whether you are watching a commercial or a regular TV program.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the AUDIO menu.  
1
Press the RIGHT arrow button to access  
the AUDIO menu.  
2
3
Use the UP/DOWN arrow button to select  
EZ SoundRite, then press the RIGHT arrow  
button.  
Use the UP/DOWN arrow button to select  
On or Off.  
4
5
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
P A G E 2 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO Menu  
Stereo/SAP Broadcasts Setup  
This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo  
program; if the station transmits an additional sound signal as well as the original one.  
Use the SAP button to select your desired MTS mode in analog signal. Each time  
you press the SAP button, MONO, STEREO, or SAP appear in turn.  
1
2
Press EXIT to save and return to TV viewing.  
Stereo or SAP can be received only when the TV station transmits those signals even  
though you have selected STEREO or SAP.  
Mono sound is automatically received if the broadcast is only in Mono; even though  
STEREO or SAP has been selected.  
Select MONO if you want to listen to the mono sound in remote fringe areas during  
stereo/SAP broadcasting.  
EZ Sound  
Using the EZ SOUND button  
Use the EZ SOUND button to select EZ Sound option.  
1
Each press of the EZ SOUND button change the EZ Sound  
option: Off, Normal, Stadium, News, Music and Theater.  
This function lets you enjoy the best sound without any special  
adjustment because the TV automatically selects the appropriate  
sound option based on the program content.  
Normal, Stadium, News, Music and Theater are preset for good  
sound quality at the factory and cannot be changed.  
When adjusting audio options (treble, bass and Front Surround)  
manually, EZ Sound automatically changes to Off.  
2
1
Press EXIT button to save and return to TV viewing.  
Using the menu  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the AUDIO menu.  
Press the RIGHT arrow button to access  
the AUDIO menu.  
2
3
4
Use the UP/DOWN arrow to select the EZ  
Sound option.  
Press the RIGHT arrow to access the EZ  
Sound menu, then use the UP/DOWN  
arrow button to select the options: Off,  
Normal, Stadium, News, Music and  
Theater.  
Off: Allows you to adjust the sound the  
way you want.  
Normal: Resets all the options to their  
Choose the NORMAL option in EZ Sound to quickly  
reset the Audio Menu options to their original pre-  
set values, or use your own settings with Off.  
preset values.  
Other options adjust the TV's audio out-  
put to the sources sound.  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
5
P A G E 2 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO Menu  
Manual Sound Control  
Adjust the sound to suit your taste and room situations.  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the AUDIO menu.  
1
Press the RIGHT arrow button to access the AUDIO  
menu.  
2
Use the UP/DOWN arrow button to select one of the  
following options: Balance, Treble, or Bass, then press  
the Right arrow button.  
3
Balance: Lets you adjust the left to right balance of  
the TV speakers.  
Treble: Increases or decreases the higher frequency  
sounds from the TV speakers.  
Bass: Increases or decreases the lower frequency  
sounds from the TV speakers.  
Use the LEFT/RIGHT arrow button to adjust the option  
to your preference. Use the UP/DOWN arrow to select  
another option.  
4
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
TV Speaker On/Off Setup  
Turns the TV Speaker option On or Off.  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the AUDIO menu.  
1
Press the RIGHT arrow button to access the AUDIO  
menu.  
2
Use the UP/DOWN arrow button to select TV Speaker,  
then press the RIGHT arrow button.  
3
Use the UP/DOWN arrow button to select On or Off.  
4
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
P A G E 2 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO Menu  
is a trademark of SRS Labs, Inc.  
TruSurround XT technology is incorporated under license  
from SRS Labs, Inc.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
Front Surround  
Using the SURROUND button  
Use the SURROUND button to select Front Surround  
option.  
1
Each press of the SURROUND button change the  
Front Surround option: Off, 3D EchoSound System or  
SRS (Sound Retrieval System) TruSurround XT.  
Press EXIT to save and return to TV viewing.  
2
1
Using the menu  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the AUDIO menu.  
Press the RIGHT arrow button to access  
the AUDIO menu.  
2
3
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Use the UP/DOWN arrow button to select  
Front Surround, then press the RIGHT  
arrow button.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the UP/DOWN arrow button to select  
Off, 3D EchoSound System or SRS (Sound  
Retrieval System) TruSurround XT.  
1
4
7
2
5
8
0
3
6
9
4
5
DASH(-)  
FLASHBK  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
Mini glossary  
SRS TruSurround XT  
Takes advantage of any multi-channel format  
TIMER  
INFO  
CC  
SIGNAL  
without needing to add extra speakers or equip-  
ment. Dialog clarity, bass enrichment and the  
addition of stereo audio enhancement that pro-  
duces an immersive sound experience from stan-  
dard stereo material.  
1/3/4  
2/3  
5
MENU  
EXIT  
1/5  
1/3/4  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
3D EchoSound System  
Creates a stunning simulated stereo effects from  
any mono sound and a realistic three-dimensional  
sound with a very wide and deep sound stage  
into stereo sound.  
SKIP  
P A G E 3 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Clock Setup  
Sets the time automatically through the digital channel  
signal.  
The digital channel signal includes information for the  
current time provided by the broadcasting station.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu option.  
1
Press the RIGHT arrow button to go to  
the TIME menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to choose  
Auto Clock, then press the RIGHT arrow  
button.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the UP/DOWN arrow button to choose  
On, then use the RIGHT arrow button to  
select Time Zone.  
4
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow button to adjust  
Time Zone.  
5
DASH(-)  
FLASHBK  
Select the time zone for your viewing  
area. Your options are: Eastern,  
Central, Mountain, Pacific, Alaska,  
Hawaii.  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
6
TIMER  
INFO  
CC  
SIGNAL  
1/3/4/5  
2/3/4  
6
MENU  
EXIT  
Set the clock manually again if the  
current time is incorrect with auto  
clock function.  
1/6  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4/5  
SKIP  
P A G E 3 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Clock Setup  
If current time setting is erased by a power failure or if  
TV is unplugged, reset the clock.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu option.  
1
Press the RIGHT arrow button to activate  
the Time menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to choose  
Manual Clock, then press the RIGHT arrow  
button.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the LEFT/RIGHT arrow button to  
select either the year, date or time option.  
Once selected, use the UP/DOWN arrow  
button to set the year, date or time  
option.  
4
1
4
7
2
5
8
0
3
6
9
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
DASH(-)  
FLASHBK  
5
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
4
2/3/4  
5
MENU  
EXIT  
1/5  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4  
SKIP  
P A G E 3 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Turn Off Time Setup  
Lets you set an automatic daily turn off time for your TV.  
Off Timer function overrides On Timer function if they are  
both set to the same time.  
You must set the current time on the clock before using  
on/off timers.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu.  
1
Press the RIGHT arrow button to to go to  
the TIME menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to choose  
Off Timer, then press the RIGHT.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the UP/DOWN arrow button to choose  
On, then press the RIGHT arrow button.  
4
Use the LEFT/RIGHT arrow button to  
select the hour or minutes options, then  
use the UP/DOWN arrow button to set the  
hours or minutes.  
1
4
7
2
5
8
0
3
6
9
5
DASH(-)  
FLASHBK  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
FAV  
MUTE  
6
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
To cancel Off Timer function, use the  
UP/DOWN arrow button to select Off in  
step 4.  
1/3/4/5  
5
2/3/4/5  
6
MENU  
EXIT  
1/6  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4/5  
SKIP  
P A G E 3 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Turn On Time Setup  
Lets you set an automatic daily turn on time for your TV.  
Off timer function overrides on timer function if they are  
both set to the same time.  
Unless a button is pressed within two hours after the TV  
is turned on by the On Timer function, the TV will auto-  
matically turn off.  
TV must be in standby mode for the On Timer to work.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu.  
1
Press the RIGHT arrow button to activate  
the TIME menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to choose  
On Timer, then press the RIGHT arrow  
button.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the UP/DOWN arrow to choose On,  
then press the RIGHT arrow button.  
4
1
4
7
2
5
8
0
3
6
9
Use the LEFT/RIGHT arrow button to  
select either Time, Channel, or Volume.  
Once selected, use the UP/DOWN arrow  
button to set either the Time, Channel, or  
Volume options.  
5
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
Press EXIT button to return to TV viewing  
VOL  
CH  
6
or press MENU button to return to the  
previous menu.  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
To cancel On Timer function, use the  
UP/DOWN arrow button to select Off in  
step 4.  
1/3/4/5  
5
1/6  
2/3/4/5  
6
MENU  
EXIT  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4/5  
SKIP  
P A G E 3 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sleep Timer Setup  
Lets you select the amount of time if you want your TV to  
turns itself off, automatically.  
Using the TIMER button  
Press the TIMER button on the remote  
control repeatedly to select the number of  
minutes.  
1
First the Off option will appear on the  
screen, followed in sequence 10, 20, 30,  
60, 90, 120, 180, and 240. The timer  
begins to count down from the number of  
minutes selected.  
Press EXIT button to save and return to  
TV viewing  
2
Using the menu  
VCR CABLE DVD  
TV  
SAT  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu.  
1
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press the RIGHT arrow button to go to  
the Time menu.  
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow button to choose  
Sleep Timer then press the RIGHT arrow  
button.  
3
DASH(-)  
FLASHBK  
Use the UP/DOWN arrow to choose a pre-  
set turn off time.  
FAV  
MUTE  
4
EZ PIC  
EZ SOUND  
VOL  
CH  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
RATIO FREEZE  
SAP SURROUND  
5
TIMER  
INFO  
CC  
SIGNAL  
When the sleep time you want is displayed  
on the screen, don’t press the timer button  
again.  
1/3/4  
2/3  
5
MENU  
EXIT  
To check the remaining sleep time, press  
the TIMER button once.  
1/5  
1/3/4  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
To change sleep time setting, press the  
TIMER button repeatedly to select time set-  
ting you want.  
SKIP  
If you turn the TV off after setting the  
sleep timer, the setting will be erased.  
P A G E 3 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Off  
If there is no input signal, the TV can be set up to switch  
to standby mode automatically after 10 minutes.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the TIME menu.  
1
Press the RIGHT arrow button to go to  
the TIME menu.  
2
VCR CABLE DVD  
TV  
SAT  
Use the UP/DOWN arrow button to choose  
Auto Off then press the RIGHT arrow.  
3
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Use the UP/DOWN arrows to choose On or  
Off.  
4
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
1
4
7
2
5
8
0
3
6
9
5
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
2/3  
5
MENU  
EXIT  
1/5  
1/3/4  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
P A G E 3 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Aspect Ratio Control  
Lets you choose the way that an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio.  
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to  
be displayed according to your preference.  
Using the RATIO button  
Use the RATIO button to select the desired picture for-  
mat.  
1
Each press of the RATIO button changes the picture for-  
mat. Your options are: Set By Program, 4:3, 16:9,  
Horizon, Zoom1, Zoom2, and Cinema Zoom.  
Press EXIT to save and return to TV viewing.  
2
Using the menu  
Press the MENU button on the remote control, then use  
the UP/DOWN arrow button to select the OPTION menu.  
1
When you receive a picture with a 16:9 aspect ratio, you  
can’t specify horizon aspect ratio.  
Press the RIGHT arrow button to go to the OPTION  
2
menu.  
If you select a horizon during receiving a 4:3 aspect  
ratio, 16:9 aspect ratio is worked as set by program.  
Use the UP/DOWN arrow to choose the Aspect Ratio  
3
option, then press the RIGHT arrow button.  
Use the UP/DOWN arrow button to select the desired  
picture format.  
4
Use the UP/DOWN arrow button to adjust the  
enlarge proportion of Cinema Zoom. The adjustment  
of range is 1~16.  
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
5
Mini glossary  
Set By Program Select the proper picture proportion to match the sources image. (4:3 4:3, 16:9 16:9)  
4:3  
Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right  
sides.  
16:9  
Choose when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.  
Horizon  
Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacu-  
lar view.  
Zoom1  
Choose when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be  
cropped.  
Zoom2  
Choose when you want the picture to be altered, both vertically extended and vertically cropped. The picture taking a halfway  
trade off between alteration and screen coverage.  
Cinema Zoom  
Choose when you want to enlarge the picture in correct proportion. When enlarging or reducing the picture, the image may  
become distorted.  
P A G E 3 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Captions  
Select a caption mode for displaying captioning informa-  
tion when provided on the program.  
This TV is programmed to remember the caption mode  
it was last set to, when you turn the POWER off.  
Press the MENU button on the remote control, then  
use the UP/DOWN arrow button to select the OPTION  
menu.  
1
Press the RIGHT arrow button to activate the OPTION  
menu.  
2
3
Use the UP/DOWN arrow button to choose Caption,  
then press the Right arrow button.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Use the UP/DOWN arrow to choose On or Off.  
4
5
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press EXIT button to return to TV viewing or press  
MENU button to return to the previous menu.  
1
4
7
2
5
8
0
3
6
9
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
2/3  
5
MENU  
EXIT  
1/5  
1/3/4  
Mini glossary  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
CAPTIONS  
The term for the words that scroll across the bot-  
tom of the TV screen; usually the audio portion of  
the program provided for the hearing impaired.  
SKIP  
TEXT  
The term for the words that appear in a large  
black frame and almost cover the entire screen;  
usually messages provided by the broadcaster.  
P A G E 3 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Captions/Text  
Analog caption displays information at any position on  
the screen usually the program's dialog.  
Text displays information, usually at the bottom position  
and is used for a data service, generally not program  
related.  
Caption/Text, if provided by the broadcaster, would be  
available for both digital and analog channels on the  
Antenna/Cable source.  
Using the CC button  
Use the CC button to select caption.  
1
Each press of the CC button changes the  
caption option; Off, CC1, CC 2, CC 3, CC 4,  
Text 1, Text 2, Text 3, or Text 4.  
Press EXIT to save and return to TV view-  
ing.  
2
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Using the menu  
1
4
7
2
5
8
0
3
6
9
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
1
DASH(-)  
FLASHBK  
Press the RIGHT arrow button to activate  
the OPTION menu.  
FAV  
MUTE  
2
EZ PIC  
EZ SOUND  
VOL  
CH  
Use the UP/DOWN arrow button to choose  
Caption/Text, then press the Right arrow  
3
RATIO FREEZE  
SAP SURROUND  
button.  
TIMER  
INFO  
CC  
SIGNAL  
Use the UP/DOWN arrow button to make  
your caption selection. Your choices are:  
CC1, CC 2, CC 3, CC 4, Text 1, Text 2, Text 3,  
or Text 4.  
4
1/3/4  
2/3  
5
MENU  
EXIT  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
1/5  
1/3/4  
5
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
P A G E 3 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caption Option Menu  
Customize the DTV/CADTV captions that will  
appear on your screen.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
1
Press the RIGHT arrow button to access  
the OPTION menu.  
2
Use the UP/DOWN arrow to select the  
Caption Option, then press the RIGHT  
arrow button.  
3
Use the LEFT/RIGHT arrow button to  
select Custom.  
4
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Use UP/DOWN arrow button to customize  
5
the Style, Font, etc., to your preference.  
Your Caption options are:  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Size: Set the size the words will appear  
in.  
1
4
7
2
5
8
0
3
6
9
Font: Select a typeface for the words.  
Text Color: Choose a color for the text.  
Text Opacity: Specify the opacity for  
the text color.  
Bg (Background) Color: Select a back-  
ground color.  
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
Bg (Background) Opacity: Select the  
VOL  
CH  
opacity for the background color.  
RATIO FREEZE  
SAP SURROUND  
Edge Type: Select an edge type.  
Edge Color: Select a color for the  
edges.  
TIMER  
INFO  
CC  
SIGNAL  
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
1/3/4  
2/3/4  
5
6
4
MENU  
EXIT  
1/5  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3/4  
A preview icon is provided at the bottom  
of the screen, use it to see the caption  
language.  
SKIP  
P A G E 4 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Menu Languages  
Select your preferred language for the menus: English,  
Español (Spanish), or Français (French).  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
1
Press the RIGHT arrow button to go to  
the OPTION menu.  
2
Use the UP/DOWN arrow to choose the  
Language, then press the RIGHT arrow  
button.  
3
Use the UP/DOWN arrow button to select  
the language you want the on screen  
menus to appear in.  
4
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
5
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
1
4
7
2
5
8
0
3
6
9
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
2/3  
5
MENU  
EXIT  
1/5  
1/3/4  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
P A G E 4 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Velocity Modulation  
Use this function to improve the outline distinction of  
the picture's edges.  
If you select VM ‘Off’, the TV will automatically return  
the pictures' edge appearance to factory settings.  
Press the MENU button on the remote con-  
trol, then use the UP/DOWN arrow button  
to select the OPTION menu.  
1
Press the RIGHT arrow button to access the  
OPTION menu.  
2
Use the UP/DOWN arrow button to select  
VM, and then press the RIGHT arrow button.  
3
Use the UP/DOWN arrow button to select  
Off, Low, or High.  
4
Press EXIT button to return to TV viewing or  
press MENU button to return to the previ-  
ous menu.  
5
Tilt  
The picture on the TV screen may be tilted to the left  
or right if the set is moved to a different place or  
direction. Picture Tilt should be used to correct any  
tilt.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
1
Press the RIGHT arrow button to access  
the Option menu.  
2
Use the UP/DOWN arrow button to select  
Tilt, then, use the LEFT/RIGHT arrow but-  
ton to adjust and correct any Tilt.  
3
Press EXIT button to return to TV viewing  
or press MENU button to return to the  
previous menu.  
4
P A G E 4 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cinema 3:2 Mode Setup  
Most movies are 24 frames/sec, but TV signal is 30 frames/sec.  
This option lets the TV do 3:2 pull-down operation for you to  
watch movies at the best motion appearance.  
VCR CABLE DVD  
TV  
SAT  
Press the MENU button on the remote  
1
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
MODE  
POWER  
TV/VIDEO  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press the RIGHT arrow button to access  
the OPTION menu.  
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose  
Cinema 3:2 Mode, then press the Right  
arrow button.  
3
DASH(-)  
FLASHBK  
Use the UP/DOWN arrow to choose On or  
Off.  
FAV  
MUTE  
4
EZ PIC  
EZ SOUND  
VOL  
CH  
Press EXIT button to return to TV viewing  
5
or press MENU button to return to the  
previous menu.  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3/4  
2/3  
MENU  
EXIT  
1/5  
1/3/4  
5
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
P A G E 4 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ Demo  
Shows you how to navigate the TV's on-screen menus.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the OPTION menu.  
1
Press the RIGHT arrow button to access  
the OPTION menu.  
2
3
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Use the UP/DOWN arrow button to select  
EZ Demo, then press the RIGHT arrow  
button.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
Press EXIT button on the remote to stop  
EZ Demo.  
1
4
7
2
5
8
0
3
6
9
4
DASH(-)  
FLASHBK  
FAV  
MUTE  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3  
2/3  
4
MENU  
EXIT  
1
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
1/3  
SKIP  
P A G E 4 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Lock Setup  
Lets you set up blocking schemes to block specific channels, ratings, and viewing  
sources.  
A password is required to gain access to this menu if the Lock System is activated.  
If the lock is already set, enter the password as requested. The TV is set up with the  
initial password ‘0’, ‘0’, ‘0’, ‘0.  
Press the MENU button on the remote control,  
then use the UP/DOWN arrow button to select  
the LOCK Menu option.  
1
Press the RIGHT arrow button to activate the  
LOCK Menu.  
2
Use the UP/DOWN arrow to choose from the  
following Lock Menu options. Once the options  
are selected, change the settings to your pref-  
erences.  
3
Lock System: Activates or disables the blocking  
scheme you set up previously.  
Set Password: Change the password by inputting  
a new password twice.  
Block Ch.: Blocks any channels that you do not  
want to watch or that you do not want your chil-  
dren to watch.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Movie Rating (MPAA): Blocks movies according  
to the movie ratings limits specified, so children  
cannot view certain movies. You can set the rat-  
ings limit by blocking out all the movies with the  
ratings above a specified level. Keep in mind that  
the movie ratings limit only applies to movies  
shown on TV, not TV programs, such as soap  
operas.  
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
1
4
7
2
5
8
0
3
6
9
DASH(-)  
FLASHBK  
FAV  
MUTE  
TV Rating-Children: Keeps children from watch-  
ing certain TV programs among only the programs  
intended for children, according to the ratings  
limit. The children rating does not apply to other  
TV programs. Unless you block certain TV pro-  
grams intended for mature audiences in the TV  
Rating - sub menu, your children can view those  
programs.  
EZ PIC  
EZ SOUND  
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
TIMER  
INFO  
CC  
SIGNAL  
1/3  
TV Rating-General: Blocks certain TV programs  
that you and your family do not want to view,  
based on the ratings.  
2
4
MENU  
EXIT  
1/4  
1/3  
Aux. Block: Enables you to select a source for  
blocking among the source devices you have  
hooked up.  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
Press EXIT button to return to TV viewing or  
press MENU button to return to the previous  
menu.  
SKIP  
4
P A G E 4 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Lock Setup (Continued)  
Parental Lock Rating Descriptions  
TV-Y (All Children): Program is appropriate for all children.  
TV-Y7 (Children 7 years and Older): Program is designed for children age 7 and above.  
TV-G (General audience): Most parents would find this program suitable for all ages.  
TV-PG (Parental guidance suggested): Program contains material that parents may find unsuitable for younger children.  
TV-14 (Parents strongly cautioned): Program contains some material that many parents would find unsuitable for chil-  
dren under 14 years of age.  
TV-MA (Mature audience only): Program is specifically designed to be viewed by adults and therefore may be unsuitable  
for children under 17.  
G (General audiences): All ages can view these programs.  
PG (Parental guidance suggested): Some program content may not be suitable for children.  
PG-13 (Parents strongly cautioned): Some program content may not be appropriate for children under 13.  
R (Restricted): Children under 17 requires parent or adult guardian to be present.  
NC-17: No one 17 and under admitted.  
X: For Adult only.  
Blocking Off: Permits all programs.  
P A G E 4 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the Remote  
The remote control for your HD receiver is a multi-  
brand or universal remote control. It can be pro-  
grammed to operate most remote-controllable  
devices of other manufacturers.  
Note that the remote control may not control all  
models of other brands.  
VCR CABLE DVD  
TV  
SAT  
MODE  
POWER  
TV/VIDEO  
Test your remote control.  
To find out whether your remote control can  
3/4  
2
1
FRONT  
HDMI  
VIDEO1  
COMP1  
VIDEO2  
COMP2  
operate the component without programming,  
turn on the component such as a VCR and press  
the corresponding mode button (VCR) on the  
remote control, while pointing at the compo-  
nent. Test the POWER and CH +/- buttons to see  
if the component responds properly. If not, the  
remote requires programming to operate the  
device.  
1
4
7
2
5
8
0
3
6
9
4
3
Turn on the component to be programmed, then  
press the corresponding mode button on the  
remote control.  
DASH(-)  
FLASHBK  
2
FAV  
MUTE  
EZ PIC  
EZ SOUND  
Press the POWER and MUTE buttons simultane-  
ously, the remote control is ready to be pro-  
grammed for the code.  
3
4
5
VOL  
CH  
RATIO FREEZE  
SAP SURROUND  
There are two ways to find the right code for the  
component.  
4
TIMER  
INFO  
CC  
SIGNAL  
A. If you press the CH +/- buttons repeatedly,  
the codes will change one at-a-time. Press the  
POWER button after each code change. If the  
right code is found, the device will turn off.  
B. Enter a code number using the number but-  
tons on the remote. Programming code num-  
bers for the corresponding component can be  
found on the following pages.  
Again, if the code is correct, the device will  
turn off.  
MENU  
EXIT  
PLAY  
REW  
PAUSE  
FF  
RECORD  
STOP  
SKIP  
Press the EXIT button to store the code.  
5
Test the remote control functions to see if the  
component responds properly. If not, repeat  
from step 2.  
6
P A G E 4 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes  
VCRs  
Brand  
AIWA  
AKAI  
Codes  
034  
Brand  
Codes  
055 060 130  
150 152  
014 034 039  
043 047 048  
255  
Brand  
Codes  
Brands  
TOTEVISION  
UNITECH  
VECTOR RESEARCH  
VICTOR  
VIDEO CONCEPTS  
VIDEOSONIC  
WARDS  
Codes  
040 101  
040  
012  
048  
034 040 041  
062 063 107  
109 140 144  
145 147  
003 008 010  
014 031 033  
034 040 053  
054 101  
016 043 046  
124 125 146  
072  
031 033 103  
012 023 039  
043  
035 037 129  
028 031 033  
108  
003 040 135  
031 033 041  
005 007 010  
064 065 108  
110 111 112  
116 117 119  
108  
KENWOOD  
AMPRO  
ANAM  
AUDIO DYNAMICS  
LG  
LLOYD  
LXI  
REALISTIC  
012 034 046  
040  
034  
003 009 013  
014 017 034  
101 106  
003 013 017  
024 031 033  
034 040 053  
054 131  
012 034 039  
043  
001 034 048  
056 058 072  
080 101  
BROKSONIC  
CANON  
CAPEHART  
CRAIG  
CURTIS MATHES  
DAEWOO  
RICO  
058  
148  
014  
MAGIN  
MAGNAVOX  
040  
RUNCO  
SALORA  
SAMSUNG  
031 033 034  
041 067 068  
012 031 033  
067 069  
101  
027 030  
YAMAHA  
ZENITH  
032 040 102  
104 105 107  
109 112 113  
115 120 122  
125  
022 043 048  
135  
003 007 010  
014 102 134  
017 037 112  
129 131  
003 008 009  
010 013 014  
017 020 031  
042 073 081  
101  
MARANTZ  
MARTA  
MATSUI  
MEI  
DAYTRON  
DBX  
031 033  
SANSUI  
SANYO  
SCOTT  
012 023 039  
043  
034 053  
MEMOREX  
003 010 014  
031 033 034  
053 072 101  
102 134 139  
045 046 059  
013 020  
013 020 045  
046 049 051  
059 061 151  
034 040  
DYNATECH  
ELECTROHOME  
EMERSON  
059  
006 017 025  
027 029 031  
034 035 036  
037 046 101  
129 131 138  
153  
MGA  
MINOLTA  
MITSUBISHI  
SEARS  
MTC  
FISHER  
003 008 009  
010  
034  
031 033 063  
072 107 109  
144 147  
MULTITECH  
NEC  
024 034  
012 023 039  
043 048  
043  
053 054  
066 070 074  
083 133 140  
145  
013 020 031  
033 063  
SHARP  
SHINTOM  
SONY  
031 054 149  
024  
003 009 031  
052 056 057  
058 076 077  
078 149  
034  
013  
031 033 034  
059 067  
FUNAI  
GE  
NORDMENDE  
OPTONICA  
PANASONIC  
GO VIDEO  
GOLDSTAR  
132 136  
SOUNDESIGN  
STS  
SYLVANIA  
012 013 020  
101 106 114  
123  
PENTAX  
HARMAN KARDON  
HITACHI  
012 045  
PHILCO  
PHILIPS  
031 034 067  
031 033 034  
054 067 071  
101  
101  
013 021 048  
108  
072  
011 014  
033 066 075  
145  
013 020 033  
SYMPHONIC  
TANDY  
TATUNG  
TEAC  
TECHNICS  
TEKNIKA  
034  
010 034  
039 043  
034 039 043  
031 033 070  
019 031 033  
034 101  
034  
006  
004 018 026  
034 043 063  
137 150  
031 033  
031 033  
012 013 015  
033 040 066  
101  
043  
012 031 033  
043 048 050  
INSTANTREPLAY  
JCL  
JCPENNY  
PILOT  
PIONEER  
PORTLAND  
PULSAR  
QUARTZ  
QUASAR  
THOMAS  
TMK  
TOSHIBA  
JENSEN  
JVC  
008 013 042  
047 059 082  
112 131  
RCA  
P A G E 4 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes  
SAT  
Brand  
ALPHASTAR DSR  
AMPLICA  
BIRDVIEW  
BSR  
CAPETRONICS  
CHANNEL MASTER  
Codes  
123  
050  
051 126 129  
053  
Brand  
Codes  
027 133 134  
Brand  
Codes  
117  
071  
Brand  
Codes  
115  
128 146  
001 081 082  
083 084 091  
120  
PERSONAL CABLE  
PHILIPS  
PICO  
PRESIDENT  
PRIMESTAR  
PROSAT  
RCA  
REALISTIC  
SAMSUNG  
VIEWSTAR  
WINEGARD  
ZENITH  
GENERAL INSTRUMENT 003 004 016  
029 031 059  
101  
139 140  
033 037 039  
051 057 104  
068  
105  
019 102  
030 110 111  
072  
066 106  
043 074  
123  
053  
HITACHI  
HOUSTON TRACKER  
013 014 015  
018 036 055  
008 009 012  
077  
CHAPARRAL  
HUGHES  
HYTEK  
053  
CITOH  
CURTIS MATHES  
DRAKE  
054  
JANIEL  
JERROLD  
KATHREIN  
LEGEND  
LG  
LUTRON  
LUXOR  
MACOM  
060 147  
061  
108  
057  
255  
SATELLITE SERVICE CO 028 035 047  
057 085  
SCIENTIFIC ATLANTA 032 138  
050 145  
005 006 007  
010 011 052  
112 116 141  
024 046 056  
076  
038 040 057  
058 093 094  
095 096 097  
098 099 100  
122  
SONY  
103  
STARCAST  
SUPER GUIDE  
TEECOM  
041  
DX ANTENNA  
ECHOSTAR  
132  
020 124 125  
023 026 075  
087 088 090  
107 130 137  
002 127  
016 025 042  
043 044 045  
048 049 078  
079 080 086  
101 135 136  
062 144  
010 059 063  
064 065  
057  
028 124 125  
069 070  
MEMOREX  
NEXTWAVE  
NORSAT  
PACE SKY SATELLITE 143  
PANASONIC  
PANSAT  
TOSHIBA  
UNIDEN  
ELECTRO HOME  
EUROPLUS  
FUJITSU  
089  
114  
017 021 022  
060 142  
121  
DVD  
Brand  
APEX DIGITAL  
DENON  
GE  
GOLDSTAR  
HARMAN KARDON  
JVC  
LG  
Codes  
022  
020 014  
005 006  
010 016 025  
027  
Brand  
Codes  
025  
013  
024  
002  
023  
008 017  
003 009  
Brand  
Codes  
013  
004 026  
021  
005 006  
005 006  
011 015  
007  
Brand  
Codes  
PHILIPS  
PIONEER  
PROCEED  
PROSCAN  
RCA  
THOMPSON  
TOSHIBA  
YAMAHA  
ZENITH  
005 006  
019 008  
009 018  
010 016 025  
MAGNAVOX  
MARANTZ  
MITSUBISHI  
NAD  
ONKYO  
PANASONIC  
012  
001 010 016  
SAMSUNG  
SONY  
P A G E 4 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes  
CATV  
Brand  
ABC  
Codes  
Brand  
Codes  
Brand  
REGAL  
REGENCY  
REMBRANT  
RK  
Codes  
049 050  
057  
025  
091  
Brand  
Codes  
032 035  
012 015 018  
086 087 088  
089  
003 004 039  
042 046 052  
053  
014  
005 007 014  
024  
026  
092  
007  
007  
065 090  
080 081  
019 030  
023  
020 030 040  
057 062 066  
032  
072  
008 022 025  
054  
052 074  
030  
049 050 055  
052 055  
070 077  
002 003 004  
008 009 010  
052 069 074  
255  
037  
033  
010 012 064  
079  
001  
028 032  
015 028 038  
071 073  
016 031 037  
053  
044 047  
001  
006 012 013  
020 065 085  
090  
034 051 052  
063 076  
016  
VIEWSTAR  
LG  
ANTRONIK  
ARCHER  
M-NET  
MACOM  
MAGNAVOX  
SAMSUNG  
SCIENTIFIC ATLANTA 003 011 041  
030 068  
ZENITH  
001 060 093  
CABLE STAR  
CENTURION  
CENTURY  
CITIZEN  
COLOUR VOICE  
COMBANO  
COMTRONICS  
DIAMOND  
EAGLE  
042 043 045  
046  
022  
030  
052  
MEMOREX  
MOVIE TIME  
NSC  
SHERITECH  
SIGNAL  
SIGNATURE  
SL MARX  
SPRUCER  
STARCOM  
OAK  
030  
047 078  
002 004 008  
009  
008 030  
067  
PANASONIC  
PARAGON  
PHILIPS  
EASTERN  
ELECTRICORD  
GE  
STARGATE  
SYLVANIA  
TADIRAN  
TANDY  
TEXSCAN  
TOCOM  
TOSHIBA  
UNIKA  
UNITED CABLE  
UNIVERSAL  
030  
017  
GEMINI  
PIONEER  
029 067  
039 040 056  
001  
007 014 024  
004 053  
005 007 014  
024 026 027  
GI  
POST NEWS WEEK  
PRUCER  
PTS  
GOLDEN CHANNEL  
HAMLIN  
HITACHI  
HOSPITALITY  
JERROLD  
059  
011 048 071  
072 073 074  
001  
PULSAR  
RCA  
047  
P A G E 5 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will  
have your new TV. Be sure to turn the power off and pull out the power cord before you begin any cleaning.  
SCREEN CLEANING  
1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of  
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its  
almost dry, and then use it to wipe the screen.  
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.  
CABINET CLEANING  
1. Use a soft cloth with a mild soap solution to wipe the cabinet.  
2. Rinse the cloth and wipe the cabinet again.  
3. Let the cabinet air-dry before turning the TV on.  
EXTENDED ABSENCE  
If you expect to leave your TV dormant for a long time (such as a vacation), unplug the power cord  
from the wall power outlet to protect against possible damage from lightning or power surges. If you  
use an off-air antenna, you may also want to disconnect it from the back of your TV before leaving.  
P A G E 5 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance (Continued)  
PICTURE INTERFERENCE  
Even though you may be getting cable, the signal may be weak, which means the quality  
of your picture may suffer due to other factors. If there are problems with the image on your TV,  
consult the Troubleshooting guide on the following pages. You may also want to contact your cable  
service provider to determine if the problem is from the cable service.  
VIDEO GAMES AND OTHER FIXED-PATTERN DISPLAYS  
If you use your TV to play video games or for other uses that involve single, fixed images, such as  
a photo-CD player, you should avoid setting the Brightness level too high.  
If static images, like network identification icons or patterns, are left on the screen for a long time  
period, they may leave a permanent impression on the TV screen. You can reduce the chance of  
this happening by  
limiting the amount of time you use the fixed-image display, and by reducing the contrast and  
brightness levels.  
If you unplug your TV, you may have to reset the clock using the Time menu described earlier.  
P A G E 5 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Some quick and easy tips for fixing problems yourself.  
POSSIBLE SOLUTIONS  
SYMPTOM  
Check your antenna connection or location.  
Check your cable input.  
Snowy picture and unclear sound.  
Check to see if the TV/VCR button on your VCR has the TV selected.  
Check your antenna direction and/or location.  
Check your cable input.  
Multiple images or ghost shadows.’  
Make sure the cable from your antenna to your TV is  
properly connected.  
The following may cause image problems or distortion:  
Electrical appliances, powerful lights, cars, trucks; computers or  
portable phones; medical equipment  
Interference: Sharp lines across  
the screen and unclear sound.  
If possible increase the distance between your TV and the offending appliance,  
or shut one of them off.  
Check volume levels.  
Make sure the TV is not Muted.  
Normal picture but no sound.  
Try another channel. The problem may be with the broadcast, not your TV.  
Are the Audio cables installed properly?  
Are the wires for external speakers (if you have external speakers)  
installed properly?  
Make sure your speakers are turned on in the Audio menu.  
If your audio mode is set to SAP, the program may not have SAP.  
Are you in TV or cable tuning mode, and should be in the other?  
Make sure output channels on all A/V equipment are on the same channel (3 or 4).  
Check that all connections are tight.  
No picture and unclear sound.  
No picture or sound.  
Is the AC power plugged in?  
Check that your AC power cord outlet works. (Test it by plugging in something  
else or try another power outlet.)  
Make sure your brightness and audio controls are set properly.  
Try another channel. The problem may be with the broadcast.  
Check the color settings in the Video menu.  
Try another channel. The problem may be with the broadcast.  
No color, but the sound is okay.  
The analog caption option may be in Text mode. Select CC 1, in the analog cap-  
tion menu.  
Picture has a big black box  
on it, but the sound is okay.  
Picture has two horizontal  
black bars, one on top and  
one on bottom.  
Select correct Aspect Ratio in Option menu  
Missing Secret Lock Code  
If you forgot your password, when the display asks you to enter the secret code,  
press 7, 7, '7, 7on the remote control.  
P A G E 5 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (Continued)  
SYMPTOM  
POSSIBLE SOLUTIONS  
Remote control doesnt work.  
Make sure the batteries are fresh and installed properly.  
Menu options cant be  
Try unplugging your TV for a few minutes,  
changed or selected.  
then plug it back in.  
No picture or sound  
when any non-cable source  
is selected.  
Check to see if the source equipment has been turned on.  
Make sure that the connections are secure on the back of your TV and on the  
source equipment.  
Weak or no Stereo Sound  
when using a stereo VCR.  
Check to see if all the connections are secure.  
Look in the Audio mode menu to see if all the settings are correct.  
If you are using channel 3 or 4 to view your VCR, stereo sound will not be  
available.  
Time is incorrect.  
Make sure the time was set initially. Probably power was lost.  
Reset clock manually.  
P A G E 5 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
A list of definitions for some of the words found in this guide.  
75 OHM RF CABLE  
A/V CABLES  
The round cable that comes from an off-air antenna or cable service  
provider. Each end looks like a hex shaped nut with a wire sticking  
through the middle, and it screws onto the threaded jack on the back of  
your TV.  
Audio/Video cables. Three cables - Right audio (red), Left audio (white),  
and Video (yellow). A/V cables are used for stereo playback of videocas-  
settes and for higher quality picture and sound from other A/V devices.  
A/V DEVICE  
ADD  
Any device that produces video or sound (VCR, DVD, cable box,  
or television).  
This function lets you add new channels to the channel list in memory  
that youll scroll through when using your remote.  
AMPLIFIER  
ANALOG TV  
ANTENNA  
An external device that amplifies sound from a television, CD player, VCR,  
DVD or other A/V device.  
Traditional method of representing a television signal as a replica (analog)  
of the original picture and sound.  
The physical receiver of television signals sent over the air. A large metal  
piece of equipment does not always have to be visible for your home to  
be using an antenna.  
ASPECT RATIO  
The ratio of the horizontal dimension to the vertical dimension of a pic-  
ture. Standard television in the U.S. today is generally transmitted and  
displayed in a 4:3 aspect ratio. High-Definition television will normally be  
formatted in a wider aspect ratio, assumed to be 16:9.  
CAPTIONS  
A form of subtitling that writes out the dialog for your program on the  
screen.  
DELETE  
This function lets you remove channels that you dont watch from the  
channel list in memory.  
DIGITAL TV (DTV)  
A new method of representing a television signal as a series of binary  
numbers (1s and 0s). This method allows the signal to be manipulated to  
eliminate redundancy and dramatically increase picture and sound quality.  
DOLBY DIGITAL  
Dolby Digital Cinema Sound is made possible by a new digital coding tech-  
nique called Dolby AC-3. Dolby AC-3 produces high-quality, 5.1 channel  
surround sound which is six discrete separate channels for a full range of  
sound. Each channel can carry a different signal simultaneously (front  
center, front left, front right, surround left, surround right and subwoofer).  
P A G E 5 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary (Continued)  
A list of definitions for some of the words found in this guide.  
FAVORITE CHANNELS  
This function created a customized list of your favorite chan-  
nels. You can access this group of channels with the FAV but-  
ton on the remote by pressing FAV repeatedly.  
INPUT  
JACK  
Refers to the jack that receives a signal into the TV, VCR or  
other A/V device.  
A connection on the back of a TV, VCR, or any other A/V  
device. This includes the RF jacks and the Audio/Video jacks  
that are color-coded.  
MODE  
The mode determines the type of device (TV, VCR, Cable, etc.)  
that the remote is controlling; remote operating mode.  
MONO SOUND  
OUTPUT  
Mono (monaural) sound is one channel of sound. On more  
than one speaker, all the speakers play the same audio.  
Refers to the jack that sends a signal out of a VCR, DVD, or  
other A/V device.  
SECOND AUDIO  
PROGRAMMING/SAP  
Second Audio Programming (SAP) is another, separate, audio  
channel available with some programming. Choosing SAP often  
refers to listening to audio in another language, such as  
Spanish or French.  
SIGNAL  
SOURCE  
Picture and sound traveling through cable, or over the air, to  
your television screen.  
The term for the equipment that provides audio and video  
information to your TV. Antenna, VCR, DVD players, and Cable  
Boxes are examples of sources.  
STEREO SOUND  
TUNER  
Stereo (stereophonic) sound refers to audio thats divided into  
right and left sides.  
Any device that picks up broadcast signals and turns them into  
picture and sound.  
P A G E 5 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Specifications  
Model  
32FZ1DC-UB  
Horizontal Size (inches)  
Height (inches)  
Thickness (inches)  
Weight (pounds)  
35.86  
23.66  
21.73  
132.3  
Power requirement  
Television system  
Television Channel  
AC 120V~ 60Hz  
American TV Standard, NTSC-M, Integrated ATSC tuner, 64 & 256 QAM  
VHF: 2 - 13  
UHF: 14 - 69  
CATV: 1 - 135  
CADTV: 1 - 135  
DTV: 2 - 69  
Power consumption (W)  
Antenna  
210W  
75 ohm external terminal for VHF/UHF  
Audio Output (W)  
Supplied accessories  
Screen Aspect Ratio  
External input ports  
7W x 2  
Remote control, batteries 2 size AA (Alkaline battery)  
16 : 9  
Video/Audio input (4 set)  
S-Video input (2)  
Component input (2 set)  
HDMI/DVI input (1)  
Digital audio optical input (DVI)(1)  
Digital audio optical output (1)  
Calibration port (1)  
Cable/Antenna port  
Design and specifications are subject to change without prior notice.  
P A G E 5 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
P A G E 5 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
P A G E 5 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG COLOR TELEVISION LIMITED WARRANTY – USA  
Your LG Color Television will be will repaired or replaced, at LG’s option, if it proves to be defective in material or work-  
manship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date  
of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the  
product and effective only when used in the U.S., including Alaska, Hawaii, and U.S. Territories.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WAR-  
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS  
REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTUR-  
ER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 Days from the Date of Purchase.  
PARTS: One Year from the Date of Purchase.  
CRT: 2 years from the Date of Purchase.  
In-Home Service : Please retain dealer’s dated bill of sale or  
delivery ticket as evidence of the Date of Purchase for proof of  
warranty, and submit a copy of the bill of sale to the service per-  
son at the time warranty service is provided.  
Replacement Units and Repair Parts may be new or  
factory remanufactured.  
Please call 1-800-243-0000 to locate your nearest LG  
Authorized Service Center.  
Replacement Units and Repair Parts are warranted for  
the remaining portion of the original unit’s warranty period.  
DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR  
DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclu-  
sion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or lim-  
itation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
G damage caused in shipping or transit  
G replacement of batteries on the remote control.  
G damage (including cosmetic damage), failure, loss or personal  
injury due to misuse, abuse, negligence, improper maintenance or  
storage, or to acts of nature or other causes beyond our control.  
(Causes beyond our control include but are not limited to lightning  
strike, power surges, power outages and water damage.)  
G repair or replacement of warranted parts by other than an  
LG authorized service centers.  
G service required as a result of improper installation,including  
incorrect or insufficient AC supply (please consult the owner’s  
manual for power supply requirements).  
G installation or repair of antenna systems, cable converters,  
cable company supplied equipment, or other components in  
a video system  
G set-up or adjustment on consumer controls, or damage  
caused by improper adjustments  
G damage caused by other system components  
G any unit that has been modified or incorporated into any  
other product  
G units purchased or serviced outside of the U.S.A.  
G product where the original factory serial numbers have been  
removed, defaced or changed in any way.  
G product sold and labeled as “as is, where is” or similar disclaimer.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTERACTIVE CENTER NUMBERS  
To obtain Customer Assistance, Product Infor-  
mation, or Dealer or Authorized Service Center  
location:  
Call 1-800-243-0000 (24 hours a day, 365 days a year)  
and choose the appropriate prompt from the menu; or  
BEFORE CALLING FOR SERVICE:  
G Please check your Operating Guide – you may avoid a service call.  
G Please have your product model number, serial number, and the date of purchase or original installation available.  
G Parts and service in accordance with the LG warranty is our responsibility and will be provided without charge. Other service  
requirements will be at the owner’s expense. If you have problems in obtaining satisfactory warranty service, write or call the  
LG Customer Interactive Center.  
TO CONTACT LG ELECTRONICS BY MAIL:  
LG Customer Interactive Center  
P. O. Box 240007  
201 James Record Road  
Huntsville, Alabama 35824  
ATTN: CIC  
P/N : 3828VA0395F a  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks Switch KSD 103 A Series User Manual
KWC Indoor Furnishings 12251042006 User Manual
Leica Laser Level 6007282 User Manual
Lexar Media Camera Accessories DS SDHC 133 381 User Manual
LG Electronics Clothes Dryer TD V10247G User Manual
Mackie Musical Instrument 402 VLZ3 User Manual
Magnavox CRT Television 27MT5405 17 User Manual
Makita Cordless Saw 5094D User Manual
Memorex Portable CD Player MKS2420 User Manual
Metra Electronics Automobile Accessories 99 7506 User Manual