LG Electronics Air Conditioner 3828A22005P User Manual

LG  
LG Cassette-Type  
Air Conditioner  
OWNER'S MANUAL  
Prior to installation, this air-conditioning  
unit must be submitted for approval by the  
utility service which provides electricity  
(EN 61000-2, EN 61000-3 Norm).  
IMPORTANT  
• Please read this owner's manual carefully and thoroughly  
before installing and operating your room air conditioner.  
• Please retain this owner's manual for future reference after  
reading it thoroughly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Safety Precautions  
To prevent injury to the user or other people and property damage, the following instructions  
must be followed.  
Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is  
classified by the following indications.  
This symbol indicates the possibility of death or serious injury.  
WARNING  
This symbol indicates the possibility of injury or damage.  
CAUTION  
Meanings of symbols used in this manual are as shown below.  
Be sure not to do.  
Be sure to follow the instruction.  
WARNING  
Installation  
Do not use a defective or  
underrated circuit breaker.  
Use this appliance on a  
dedicated circuit.  
For electrical work, contact  
the dealer, seller, a qualified  
electrician, or an Authorized  
Service Center.  
Always ground the product.  
• There is risk of fire or electric  
shock.  
• Do not disassemble or repair the • There is risk of fire or electric  
product. There is risk of fire or  
electric shock.  
shock.  
Install the panel and the  
cover of control box  
securely.  
Always install a dedicated  
circuit and breaker.  
Use the correctly rated  
breaker or fuse.  
• There is risk of fire or electric  
shock.  
• Improper wiring or installation  
may cause fire or electric shock  
• There is risk of fire or electric  
shock.  
Owner's Manual 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Do not modify or extend the  
power cable.  
Do not install, remove, or re-  
install the unit by yourself  
(customer).  
Be cautious when unpacking  
and installing the product.  
• There is risk of fire or electric  
shock.  
• There is risk of fire, electric  
shock, explosion, or injury.  
• Sharp edges could cause injury.  
Be especially careful of the case  
edges and the fins on the  
condenser and evaporator.  
Do not install the product on a  
defective installation stand.  
Be sure the installation area  
does not deteriorate with age.  
For installation, always contact the  
dealer or an Authorized Service Center.  
• It may cause injury, accident, or  
damage to the product.  
• If the base collapses, the air  
conditioner could fall with it,  
causing property damage,  
product failure, and personal  
injury.  
• There is risk of fire, electric  
shock, explosion, or injury.  
Operation  
Do not let the air conditioner run for a  
long time when the humidity is very high  
Take care to ensure that power  
cable could not be pulled out or  
damaged during operation.  
Do not place anything on the  
power cable.  
and a door or a window is left open  
.
• Moisture may condense and wet • There is risk of fire or electric  
• There is risk of fire or electric  
shock.  
or damage furniture.  
shock.  
Do not plug or unplug the  
power supply plug during  
operation.  
Do not touch(operate) the  
product with wet hands.  
Do not place a heater or  
other appliances near the  
power cable.  
• There is risk of fire or electric  
shock.  
• There is risk of fire or electrical  
shock.  
• There is risk of fire and electric  
shock.  
4 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Do not allow water to run  
into electric parts.  
Do not store or use flammable  
gas or combustibles near the  
product.  
Do not use the product in a  
tightly closed space for a  
long time.  
• It may cause There is risk of fire,  
failure of the product, or electric  
shock.  
• There is risk of fire or failure of  
product.  
• Oxygen deficiency could occur.  
Gasolin  
When flammable gas leaks,  
turn off the gas and open a  
window for ventilation  
If strange sounds, or small or  
smoke comes from product. Turn  
the breaker off or disconnect the  
power supply cable.  
Stop operation and close the window  
in storm or hurricane. If possible,  
remove the product from the window  
before the hurricane arrives.  
before turn the product on.  
• Do not use the telephone or turn  
switches on or off.  
• There is risk of electric shock or  
fire.  
• There is risk of property damage,  
failure of product, or electric shock.  
There is risk of explosion or fire  
Do not open the inlet grill of the  
product during operation.  
(Do not touch the electrostatic  
filter, if the unit is so equipped.)  
When the product is soaked  
(flooded or submerged),  
contact an Authorized  
Service Center.  
Be cautious that water could  
not enter the product.  
• There is risk of physical injury,  
electric shock, or product failure.  
• There is risk of fire or electric  
shock.  
• There is risk of fire, electric shock,  
or product damage.  
Ventilate the product from time to time when  
operating it together with a stove, etc.  
Turn the main power off when cleaning or  
maintaining the product.  
• There is risk of fire or electric shock.  
• There is risk of electric shock.  
Owner's Manual 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
When the product is not be used for a long  
time, disconnect the power supply plug or  
turn off the breaker.  
Take care to ensure that nobody could step  
on or fall onto the outdoor unit.  
There is risk of product damage or failure, or  
This could result in personal injury and product  
unintended operation.  
damage.  
CAUTION  
Installation  
Always check for gas  
(refrigerant) leakage after  
installation or repair of product.  
Install the drain hose to  
ensure that water is drained  
away properly.  
Keep level even when  
installing the product.  
• Low refrigerant levels may cause  
failure of product.  
• A bad connection may cause  
water leakage.  
• To avoid vibration or water  
leakage.  
90°  
Do not install the product where the  
noise or hot air from the outdoor unit  
could damage the neighborhoods.  
Use two or more people to  
lift and transport the  
product.  
Do not install the product where  
it will be exposed to sea wind  
(salt spray) directly.  
• It may cause a problem for your  
neighbors.  
• Avoid personal injury.  
• It may cause corrosion on the  
product. Corrosion, particularly on  
the condenser and evaporator fins,  
could cause product malfunction or  
inefficient operation.  
Operation  
Do not expose the skin directly to cool air for  
long periods of time.  
(Don't sit in the draft.)  
Do not use the product for special purposes, such as  
preserving foods, works of art, etc. It is a consumer air  
conditioner, not a precision refrigeration system.  
This could harm to your health.  
There is risk of  
damage or  
loss of property.  
6 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Do not block the inlet or  
outlet of air flow.  
Use a soft cloth to clean. Do  
not use harsh detergents,  
solvents, etc.  
Do not touch the metal parts of  
the product when removing the  
air filter. They are very sharp!  
It may cause product failure.  
There is risk of fire, electric shock,  
or damage to the plastic parts of  
the product.  
There is risk of personal injury.  
Do not step on or put  
anyting on the product.  
(outdoor units)  
Always insert the filter securely.  
Clean the filter every two weeks  
or more often if necessary.  
Do not insert hands or other  
objects through the air inlet or  
outlet while the product is operated.  
There is risk of personal injury  
A dirty filter reduces the efficiency There are sharp and moving parts  
and failure of product.  
of the air conditioner and could  
cause product malfunction or  
damage.  
that could cause personal injury.  
Do not drink the water  
drained from the product.  
Use a firm stool or ladder  
when cleaning or  
maintaining the product.  
Replace the all batteries in the  
remote control with new ones of  
the same type. Do not mix old  
and new batteries or different  
types of batteries.  
It is not sanitary and could cause  
Be careful and avoid personal  
There is risk of fire or explosion  
serious health issues.  
injury.  
Do not recharge or disassemble the batteries.  
Do not dispose of batteries in a fire.  
If the liquid from the batteries gets onto your  
skin or clothes, wash it well with clean water. Do  
not use the remote if the batteries have leaked.  
They may burn or explode.  
The chemicals in batteries could cause burns or other  
health hazards.  
Owner's Manual 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operating Instructions  
Indoor Unit  
Signal Receiver  
Receives the signals from the remote control.  
(Signal receiving sound: two short beeps or one long beep.)  
Cassette Type Indoor Unit  
On/Off  
: Lights up during the system operation.  
Filter Sign  
Timer  
: Lights up after 2400 hours from the time of first operating unit.  
: Lights up during Timer operation.  
Forced  
Operation  
: Operation procedures when the remote control  
can't be used.  
Outdoor Unit : Lights up during outdoor unit operation.  
Operation  
Anti-bacteria  
Signal Receptor  
Air  
Intake  
Air Outlet  
Remote  
Controller  
8 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Name and Function of Remote Controller  
AUTO SWING OPERATION  
SET TEMP  
Room Temp  
FAN SPEED SUB FUNCTION  
HI  
AUTO Heater Preheat  
1
MED  
LO  
JET  
SLo  
Defrost Humidify  
Filter  
Out door  
ZONE  
2ndF  
Time  
1
2
3
4
Operation unit No Func Program set  
Timer  
On Off  
Set no. Time 01 03 05 07 09 11 13 15 17 19 21 23  
3
17  
2
5
10  
11  
12  
13  
14  
15  
Timer  
Cancel  
2ndF  
6
4
Program Week Holiday  
Set/Clr  
Plasma  
RESET  
7
8
9
Hour  
Min  
16  
18  
9
1
2
Operation display  
Displays the operation conditions.  
Plasma Air Clean Button  
10  
11  
12  
On/Off Button  
Operation starts when this button is pressed, and stops  
when the button is pressed again.  
Timer Cancel Button  
Used to cancel the timer.  
Timer Set Button  
Used to set the timer when the desired time is obtained.  
3
Set Temperature Button  
Used to set the temperature when the desired  
temperature is obtained.  
Week Button  
Used to set a day of the week.  
4
5
FAN Operation Button  
Used to circulate room air without cooling.  
13 Program Button  
Used to set the weekly timer.  
Fan Speed (Jet Cool Button)  
Used to set the desired fan speed or select Jet cool  
mode.  
14  
Holiday Button  
Used to set a holiday of the week.  
15 Time Set Button  
6
Operation Mode Selection Button  
Used to select the operation mode.  
Auto Operation Mode  
Used to set the time of the day and change the time in  
the weekly timer Function.  
Cooling Operation Mode  
Soft Dry Operation Mode  
16  
17  
18  
Set and Clear Button  
Used to set and clear the weekly timer.  
7
8
Auto Swing Button  
Used to swing up and down.  
Swirl Button  
Used to select swirl mode.  
Room Temperature Checking Button  
Used to check the room temperature.  
Reset Button  
Used to set the current time and clear the setting time.  
Display temperature can be different from actual room temperature if the remote controller is  
installed at the place where sun-rays are falling directly or the place nearby heat source.  
Owner's Manual 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Wireless Remote Controller  
Controls  
Signal transmitter  
1. START/STOP BUTTON  
Operation starts when this button is pressed and stops  
when the button is pressed again.  
2. OPERATION MODE SELECTION BUTTON  
Used to select the operation mode.  
3. ROOM TEMPERATURE SETTING BUTTONS  
Used to select the room temperature.  
4. INDOOR FAN SPEED SELECTOR  
Used to select fan speed in four steps low, medium,  
high and CHAOS.  
5. JET COOL  
Used to start or stop the speed cooling.  
(speed cooling operates super high fan speed in cooling mode.)  
6. AUTO SWING BUTTON  
Used to stop or start louver movement and  
set the desired up/down airflow direction.  
5
6
1
3
7. ON/OFF TIMER BUTTONS  
Used to set the time of starting and stopping operation.  
8. TIME SETTING BUTTONS  
Used to adjust the time.  
9. TIMER SET/CANCEL BUTTON  
Used to set the timer when the desired time is obtained and to  
cancel the Timer operation.  
10. SLEEP MODE AUTO BUTTON  
Used to set Sleep Mode Auto operation.  
11. AIR CIRCULATION BUTTON  
4
10  
2
7
CANCEL  
9
ON  
OFF  
SET  
AUTO CLEAN  
12  
11  
8
17  
18  
14  
16  
13  
15  
Used to circulate the room air without cooling or heating.  
12. ROOM TEMPERATURE CHECKING BUTTON  
Used to check the room temperature.  
13. PLASMA  
Flip-up door  
(opened)  
Used to start or stop the plasma-purification function.  
14. HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON  
(OPTIONAL)  
Operation Mode  
Used to set the desired horizontal airflow direction.  
15. RESET BUTTON  
Cooling Operation  
Used prior to resetting time.  
16. 2nd F Button  
Used prior to using modes printed in blue at the bottom of  
buttons.  
Auto Operation  
17. AUTO CLEAN (OPTIONAL)  
Healthy Dehumidification Operation  
Used to set Auto Clean mode.  
18. ˚C TO ˚F SWITCHING BUTTON  
Used to switch temperature reading from Centigrade to  
Fahrenheit.  
The wireless remote controller do not operate the swirl mode.  
CAUTION:of handling the Remote Controller  
Aim at the signal receiver on the wired remote controller so as to operate.  
The remote control signal can be received at a distance of up to about 7m.  
Be sure that there are no obstructions between the remote controller and the signal receptor.  
Do not drop or throw the remote controller.  
Do not place the remote controller in a location exposed to direct sunlight, or near the heating unit, or  
any other heat source.  
Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal  
operation. (ex:electronic quick start, ELBA, inverter type fluorescent lamp)  
10 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Set the Current Time and day of the Week  
Unless you press any button about 5 (sometimes 10) seconds while setting function, the setting mode returns to  
initial mode.  
Press the '  
' button.  
Hour  
1
Each time the button is pressed, the number is changed from 00 to 23.  
This number indicates current hour.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Time  
Hour  
For example, if it is 14:25, press  
button 14 times.  
Hour  
Press the '  
' button.  
Min  
2
Each time the button is pressed, the number increases from 00 to 59.  
This number indicates current minute.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Min  
Time  
For example, if it is 14:25, press  
button 25 times.  
Min  
Week  
Press '  
' button.  
3
Each time the button is pressed, a day of the week is shifted from sunday to saturday.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Week  
Time  
Week  
For example, if today is Wed, press  
button 3 times.  
RESET  
Press the '  
' button.  
4
If you want to confirm the current time and a day of the week, click the Reset button.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
RESET  
Owner's Manual 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Weekly Programming  
Press the Program button.  
1
Program set  
The remote controller is displayed like a picture. Then '  
', '  
' and '01' is blinked.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Program  
Program set  
Time 01 03 05 07 09 11 13 15 17 19 21 23  
Week  
Press the '  
' button.  
2
3
Week  
Press  
button repeatedly until desired mode appears.  
Week  
Week  
For example, if you want Thu, press  
Select the time you want.  
button 4 times.  
Press Hour or  
button, then blinking letter is shown.  
Min  
SET/CLR  
If you press  
button, then '  
' shape appears.  
unit  
05  
'
' shape means that five o'clock is reserved.  
Using below buttons, you can reserve time.  
SET/CLR  
Hour  
Min  
* For example, the air-conditioner is on 6,7,8 and 13~22 o'clock.  
OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Time 01 03 05 07 09 11 13 15 17 19 21 23  
12 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Holiday Setting  
If Tuesday is a holiday in this week, you may set a holiday.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Program  
Press the Program button.  
1
Program set  
Time 01 03 05 07 09 11 13 15 17 19 21 23  
Week  
Press the Week button.  
2
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Select the Tuesday.  
Program set  
Time 01 03 05 07 09 11 13 15 17 19 21 23  
Holiday  
Press the Holiday button.  
3
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Then the remote controller will be displayed '  
The outside rectangular means holiday.  
'.  
Time 01 03 05 07 09 11 13 15 17 19 21 23  
You cannot set the weekly program for a holiday.  
Timer Setting  
If you want to turn it 'ON' during 'OFF' mode or turn it 'OFF' during 'ON' mode, you can use timer  
setting function.  
Timer  
Press the Timer button.  
1
2
Press Hour or  
If you press  
button, then you can control the desired time.  
Min  
Hour  
Min  
O
eration un  
button, the display panel shows ( ex :  
).  
01 03  
It means 3 hoMurins later, it will stop while 'ON' mode, it will operate while 'OFF' mode.  
Cancel  
If you want to cancel the timer setting function, press the Cancel button.  
3
Self-diagnosis Function  
' CH' will flash in the remote controller display when a problem occurs.  
Then please contact your dealer.  
Owner's Manual 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operation Mode  
Cooling Mode  
Soft Dry Mode  
Auto Mode  
Operation Procedure  
On/Off Button  
1st  
AUTO SWING OPERATION  
SET TEMP  
Room Temp  
FAN SPEED SUB FUNCTION  
HI  
AUTO Heater Preheat  
MED  
LO  
JET  
SLo  
Defrost Humidify  
Filter  
Out door  
ZONE  
2ndF  
Time  
1
2
3
4
Operation unit No Func Program set  
Timer  
On Off  
Set no. Time 01 03 05 07 09 11 13 15 17 19 21 23  
Operation Mode Selection Button  
3
2nd  
1
Timer  
Cancel  
2ndF  
2
4
Program Week Holiday  
Set/Clr  
Room Temperature Setting Button  
3rd  
Plasma  
RESET  
Hour  
Min  
Indoor Fan Speed Selection Button  
4th  
14 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Cooling Operation Mode  
Press the On/Off Button.  
1
Select Cooling Operation.  
2Press the Operation Mode Selection Button.  
Each time the button is pressed, the operation mode is shifted in the arrow direction.  
Operation Display  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
AUTO
LO  
i
Cooling Operation  
Soft Dry Operation  
Auto Operation  
Set the temperature lower than the room temperature.  
The temperature can be set within  
a range of 18°C ~ 30°C by 1°C .  
3
4
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
To raise the Temperature.  
To lower the Temperature.  
Set the fan speed.  
Operation Display  
AUTO SWING OPERATION  
FAN SPEED 
SET TEMP  
FAN SPEED S
AUTO SWING  
AUTO SWING OPERATION  
S
SET TEMP  
AUTO SWING  
OPERATION  
SET TEMP  
FAN SPEED  
AUTO SWING  
OPERATION  
SET TEMP  
FAN SPEED  
OPERATION  
SET TEMP  
FAN SPEED  
A
U
T
O
S
W
ING  
OPERATION  
SET TEMP  
FAN SPEED  
AUTO
HI  
SLo  
JET  
LO  
i
MED  
l
i
i
Select the fan speed in six steps-high, auto, power jet, super-low, low, medium.  
The display shows high fan speed.  
Each time the button is pressed, the fan speed mode is shifted.  
Owner's Manual 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Soft Dry Operation Mode  
This mode dehumidifies without overcooling.  
Press the On/Off Button.  
1
Select Soft Dry Operation.  
2
Press the operation Mode Selection Button.  
Each time the button is pressed, the operation mode is shifted in the arrow direction.  
Operation Display  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
AUTO
LO  
Cooling Operation  
Soft Dry Operation  
Auto Operation  
During Dry Operation.  
3
The indoor fan speed is automatically set to the low, so the shift of the indoor fan speed is  
impossible because of already being set to the best speed for Dry Operation by Micom  
Control.  
16 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Auto Operation Mode  
Press the On/Off Button.  
1
To select Auto Operation, press the Operation Mode Selection button.  
2Each time the button is pressed, the operation mode is shifted in the direction of the arrow.  
Operation Display  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
AUTO
LO  
Cooling Operation  
Soft Dry Operation  
Auto Operation  
The temperature and fan speed are automatically set by the electronic controls based on the actual  
3room temperature. If you want to change the set temperature, close the door on the remote control  
and press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times  
(up to two times) you should press the button. The set temperature will then be changed.  
The temperature can be set within a range of -2~2 by 1 level.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
AUTO
Cold Cool  
Proper  
Warm Hot  
To raise the Temperature.  
(This indication will be shifted to the initial  
Auto Mode Display state after 5 seconds.)  
To lower the Temperature.  
During Auto Operation:  
You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.  
If the system is not operating as desired, manually switch to another mode. The system will not  
automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be  
done by manually resetting.  
During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and  
down automatically. If you want to stop auto-swing, press the chaos swing button again.  
Owner's Manual 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
FAN Operation Mode  
Press the On/Off Button.  
1
Press FAN Operation Button.  
2
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
Each time Fan Speed button is pressed, the fan speed mode is shifted in the arrow  
3direction.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
Fan speed is high.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
MED  
Fan speed is medium.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
LO  
Fan speed is low.  
18 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Comfort Operation with Swirl  
• It is the function for comfort cooling/heating operation.  
• The diagonal two louvers are opened the more larger than the other louvers.  
After one minute, it is opposite.  
Press the On/Off Button.  
1The unit will respond with a  
beep.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
Press the Swirl Button to operate  
HI  
2comfort cooling or heating.  
Then it will be changed the open  
angle of two horizontal louvers.  
To cancel the Swirl Mode, press the Swirl  
Timer  
Cancel  
2ndF  
3Button again.  
Program Week Holiday  
Set/Clr  
Plasma  
RESET  
Hour  
Min  
Owner's Manual 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Vane Control  
You can change the open angle to the install situation.  
Press the On/Off Button.  
1
Press the right arrow and auto swing button simultaneously for three seconds.  
2Then the display will be toggled like before.  
Detach your finger from buttons at the moment that it is displayed "P0" in the operation  
display.  
+
Min  
Press the Auto Swing button again.  
3Then it will be changed the open angle of two horizontal louvers.  
(from P0 to P5)  
Press the right arrow button and Auto Swing button to finish the setting.  
4
+
Min  
Press the left arrow button and Auto Swing button for three seconds in order  
5to set the other two louvers. Next procedure is the same before.  
+
Hour  
Although the air conditioner is turned ON/OFF, the previous setting position is not changed  
6If you want to set the default position, you have to set the "P0". Because the default is the  
"P0".  
20 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Auto Swing Mode  
Press the On/Off  
Press the Auto Swing  
Press again the Auto  
1button.  
2button then the  
3Swing button to  
(Confirm the unit  
on operation.)  
horizontal  
cancel the  
Auto Swing mode.  
louvers swing  
up and down  
automatically.  
Child Lock Function  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
This is the Function that any children cannot used to the air-conditioner.  
Operation procedure  
To set the Child-Lock Function  
1
Press the Timer button and Minute Set button for three seconds. Then the operation  
mode shift to child lock mode and it is displayed CL in the operation display.  
When you press any button in this time, the remote controller is not converted to any  
selected mode and the CL is displayed in the remote controller for about three  
seconds. But the Room Temperature function is operated in spite of child lock mode.  
Timer  
Cancel  
2ndF  
ogram Week Holiday  
Set/Clr  
Plasma  
Hour  
Min  
To cancel the Child-Lock Function  
2
Press the Timer button and Minute Set button for three seconds. Then the child-  
lock mode is cancelled and the preselected mode is displayed in the remote  
controller.  
Helpful information  
Fan speed and cooling capacity.  
The cooling capacity indicated in the specification is  
the value when the fan speed is set to high, and the  
capacity will be lower at low or medium fan speed.  
High fan speed is recommended when you wish to  
cool the room quickly.  
High  
Speed  
Owner's Manual 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Forced Operation  
Operation procedures when the remote control can't be used.  
Press the tact switch (Forced operation) for 2 seconds.  
If you want to stop operation, press again the tact switch.  
In case the power comes on again after power failure on the Forced  
Operation mode, the operating conditions are automatically set as  
follows:  
Forced operation  
(Tact switch)  
During Forced Operation, the initial mode continues.  
Heat pump Model  
Cooling Model  
Room Temp. set Temp.-2°C Room Temp. < set Temp.-2°C  
Operating mode  
Indoor FAN Speed  
Setting Temperature  
Cooling  
High  
Cooling  
Heating  
set available  
set available  
set available  
set available  
22°C  
Auto Restart Function  
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate  
procedures automatically to the previous operating conditions.  
Tips for Filter sign LED  
1
2
Filter sign lamp (LED) is ON.  
If LED indicating filter sign lamp is ON, clean the filter.  
After cleaning the filter, press the Timer button and  
Then filter sign LED is OFF.  
button of wired remote controller at the same time for 3 sec.  
3
PLASMA Purification Operation  
Press the On/Off button. The unit will  
respond with a beep.  
AUTO SWING OPERATION  
SET TEMP  
FAN SPEED SUB FUNCTION  
HI  
1
2
Open the door on the remote control. Press the  
PLASMA air purifying operation ON/OFF button.  
Operation will start when the button is pressed and  
stop when the button is pressed again.  
Plasma  
Timer  
Cancel  
2ndF  
Program Week Holiday  
Set/Clr  
Set the fan speed again with door of the remote  
control closed. You can select the fan speed in four  
steps-low, medium, high or Auto.  
Each time the button is pressed, the fan speed  
mode is shifted.  
Plasma  
RESET  
3
Hour  
Min  
22 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Service  
Maintenance and Service  
Indoor Unit  
Grille, Case and Remote Control  
Turn the system off before cleanining, To clean, wipe  
with a soft, dry cloth. Do not use bleach or abrasives.  
NOTICE  
Supply power must be disconnected before cleaning  
the indoor unit.  
Anti-  
Air  
Intake  
bacteria  
filter  
Air Filters  
Air Outlet  
Remote  
The air filters behind the front grille should be checked  
Controller  
and cleaned once every 2 weeks or more often if  
neccessary.  
Remove the Air filters.  
Take hold of the tab and pull slightly  
forward to remove the filter.  
1
CAUTION: When the air filter is to  
be removed, do not touch the metal  
parts of the indoor unit.  
Rack  
It may cause an injury.  
Clean dirt from the air filter using a vacuum  
cleaner or washing with water.  
Air Filter  
2
If dirt is conspicuous, wash with a neutral  
detergent in lukewarm water.  
If hot water (50°C or more) is used, it may  
be deformed.  
Never use any of the followings:  
Water hotter than 40°C.  
Could cause deformation and/or discoloration.  
After washing with water, dry well in  
Volatile substances.  
Could damage the  
surfaces of the air  
conditioner.  
3
the shade.  
Do not expose the air filter to direct  
sunlight or heat from a fire when drying it.  
Install the air filter.  
4
N
N
E
R
C
O
A
U
G
R
I
N
L
B
e
G
R E  
R
n
z
en  
e
Owner's Manual 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Service  
Purifying filter  
Cleaning  
After removing the air filters, pull slightly  
forward to remove the PLASMA filter.  
1
2
3
The PLASMA filter behind the air filters should be  
checked and cleaned once every 3 months or more  
often if necessary.  
Dip the PLASMA filter into the water mixed  
with neutral detergent, for 20~30 minutes.  
Dry the PLASMA filter in the shade for a day  
(Especially, the humidity must be removed  
perfectly on this parts).  
4
5
Note the cuts of electric discharge lines.  
Re-install the PLASMA filter to the original  
position.  
CAUTION:Dont touch this  
PLASMA Filter within 10 seconds  
after opening the inlet grille, it  
may cause an electric shock.  
Replacement  
Recomended use period : About 2 years  
Open front panel and remove air  
filter.  
1
Reinsert air filter and close front  
panel.  
4
2
3
Remove air purifying filter.  
Insert new air purifying filter.  
2
1
24 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Service  
When the air conditioner is not GOING to be used for a long time.  
When it is not going to be used for  
When the air conditioner is to be used again.  
a long time.  
Clean the air filter and install it in the  
indoor unit.  
(Refer to page 24 for cleaning it.)  
Operate the air conditioner at the  
following settings for 2 to 3 hours.  
Type of operation: Fan operation  
mode.(Refer to page 18.)  
1
2
1
2
3
This will dry out the internal mechanisms.  
Check that the air inlet and outlet of  
the indoor/outdoor unit are not  
blocked.  
Turn off the breaker.  
CAUTION: Turn off the breaker  
when the air conditioner is not going  
to be used for a long time.  
Check that the ground wire is  
connected correctly. It may be  
connect to the indoor unit side.  
Dirt may collect and may cause a fire.  
Helpful information  
The air filters and your electiric bill.  
If the air filters become clogged with dust, the  
cooling capacity will drop, and 6% of the  
electricity used to operate the air conditioner will  
be wasted.  
Operation Tips  
Do not overcool the room.  
Keep blinds or curtains  
closed.  
Keep the room temperature  
uniform.  
This is not good for the health  
and wastes electricity.  
Do not let direct sunshine enter  
the room when the air  
Adjust the vertical and horizontal  
airflow direction to ensure a  
conditioner is in operation.  
uniform temperature in the room.  
Make sure that the doors  
and windows are shut tight.  
Clean the air filter  
regularly.  
Ventilate the room  
occasionally.  
Avoid opening doors and  
windows as much as possible to  
keep the cool air in the room.  
Blockages in the air filter reduce  
the airflow and lower cooling and  
dehumidifying effects. Clean at  
least once every two weeks.  
Since windows are kept closed,  
it is a good idea to open them  
and ventilate the room now and  
then.  
Owner's Manual 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Service  
Troubleshooting  
Check the following points before requesting repairs or service.... If the malfunction persist, please contact your  
dealer.  
Case  
Explanation  
See page  
13  
-
Have you made a mistake in timer operation?  
The air conditioner does not  
operate.  
Has the fuse blown or has the circuit breaker  
been tripped?  
Check that this is not a damp smell exuded by  
the walls, carpet, furniture or cloth items in the  
room.  
The room has a peculiar odor.  
-
-
Condensation occurs when the airflow from the  
air conditioner cools the warm room air.  
It seems that condensation is  
leaking from the air conditioner.  
This is the protector of the mechanism.  
Air conditioner does not operate  
for about 3 minutes when restart.  
-
Wait about three minutes and operation will  
begin.  
Is the air filter dirty? See air filter cleaning  
instructions.  
Does not cool or heat effectively.  
24  
The room may have been very hot when the  
room air conditioner was first turned on. Allow  
time for it to cool down.  
Has the setting temperature been set incorrectly?  
15, 17  
-
Are the indoor unit's air inlet or outlet vents  
obstructed?  
For a noise that sounds like water flowing.  
The air conditioner operation is  
noisy.  
-This is the sound of freon flowing inside the air  
conditioner unit.  
-
For a noise that sounds like the compressed air  
releasing into atmosphere.  
-This is the sound of the dehumidifying water  
being processed inside the air conditioning unit.  
This sound is generated by the  
Crack sound is heard.  
expansion/contraction of the inlet grille, etc. due  
to changes of temperature.  
Has the circuit breaker been tripped?  
Are the batteries inserted in the opposite (+) and  
(-) directions?  
Remote control display is faint, or  
no display at all.  
26 Cassette- Type Air Conditioner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P/No.: 3828A22005P  
Printed in Korea  
After reading this manual, keep it in a place easily accessible to the user for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks Switch KS 105F User Manual
Leupold Hunting Equipment Rx 600 User Manual
Magellan GPS Receiver Meridian XL User Manual
Magic Chef Microwave Oven MCO160SF User Manual
Magnavox CD Player AZ2605 17 User Manual
Makita Planer 10170 User Manual
Marshall Amplification Musical Instrument Amplifier 2266 User Manual
MB QUART Car Stereo System QS216 User Manual
Memorex Flat Panel Television DT1900 C User Manual
Micro Star Computer Computer Hardware G52 73601X1 User Manual