Kyocera Telephone KI G100 User Manual

Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
KI-G100  
<Main Kit>  
IRIDIUM Ready GSM Handset  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Table of Contents  
Safety Precautions.............................................................................front cover  
I
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
6. Problem Solving / Helpful Hints ..................................................................28  
In case of a problem........................................................................................28  
Maintenance....................................................................................................29  
Keypad letters allocation .................................................................................29  
Technical data .................................................................................................30  
Licensing .........................................................................................................30  
7. Accessories...................................................................................................31  
GSM accessories ............................................................................................31  
IRIDIUM accessories.......................................................................................33  
Index...................................................................................................................35  
Emergency call.................................................................................... rear cover  
II  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Introduction  
Welcome!  
Congratulations on choosing the Kyocera KI-G100 GSM phone for use on the  
GSM and IRIDIUM services. You have selected the unique digital phone  
designed to use the features offered by both the GSM cellular and the IRIDIUM  
satellite networks in a simple, friendly way.  
Your KI-G100 phone has been designed to be easy to use - simply follow the  
self explanatory instructions on the display. Once you have mastered the basic  
concept of using the phone, you should only refer to this User Guide  
occasionally.  
WHAT’S IN THE BOX  
In your KI-G100 box you will find:  
-
-
-
-
-
-
-
KI-G100 handset  
Rechargeable battery, to power the phone  
Rapid charger, for charging the battery directly on the phone  
Carry Strap  
User Guide, that you should read thoroughly and retain for future reference  
Quick Manual  
Warranty Booklet  
Introduction  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
1. Getting Started  
INSERT YOUR SIM CARD  
The GSM SIM (Subscriber Identification Module) Card contains all the relevant  
information concerning your subscription (card number, phone number...). This  
card must be inserted in the phone prior to use.  
Place the SIM Card (Plug-In size) in the phone as  
shown beside. Ensure that the gold chip is facing  
upwards and towards the bottom of the phone.  
To remove the SIM Card:  
Press the release catch  
When the SIM Card pops up, pull it out  
ATTACH THE BATTERY  
a. Hook the battery onto the hinge at the bottom of the phone  
b. Swing the battery down and click it into place  
a:  
b:  
To remove the battery,  
a. Press the release catch  
b. Swing the battery up and then lift it off the phone  
a:  
b:  
2
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
CHARGE YOUR BATTERY  
Before using your phone for the first time or after a long period without use, it is  
important to charge the battery for at least 24 hours.  
Plug the connector into the socket in the base of the  
phone, then plug the transformer unit into a mains  
AC power socket. In normal operation, the battery is  
fully charged when the bars in the battery symbol  
stop moving.  
Note: if the battery is completely discharged, the battery icon indicating the  
charge status will only appear 2 or 3 minutes after you connect the charger.  
We recommend to always discharge completely the battery before recharging.  
CARRY STRAP  
The Carry Strap included in the box can be fixed  
and removed as shown beside.  
SWICH ON YOUR PHONE  
Press and hold the  
Enter the PIN code of your SIM Card  
(code provided together with the SIM Card)  
key  
Enter  
PIN  
****  
If you make a mistake, use the  
(Clear) key:  
-
short press: clear the last digit  
long press: clear the complete entry  
OK  
SOS  
Mem  
-
Press (OK) to confirm  
(Network Name)  
The phone is ready to be used when a network  
name is displayed.  
Menu  
Note: if you enter a wrong PIN code 3 times in succession, your SIM  
Card is blocked and you must enter the PUK code to unblock it (see  
section 5. Problem Solving / Helpful Hints on page 28).  
Getting Started  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
YOUR KI-G100 PHONE  
The keypad and the display are your way of communicating with your KI-G100  
phone. They light up when you turn the phone on or press any key. The  
backlighting goes off automatically after 10 seconds, to conserve battery life.  
Keypad and phone descriptions  
1
2
3
4
Antenna  
9
14 Earpiece  
#/Scroll right  
Power/End/  
Hang up  
Alert speaker slots  
LCD panel  
10  
15 Status LEDs  
16 Data and charger  
connector  
11  
Clear/Manner  
Mode toggle  
Soft key 1  
Speak/Redial  
5
6
17 IRIDIUM connector  
18 Battery/SIM release  
12  
13  
~
Number/  
Soft Key 2  
/Symbol/Character  
19 Battery  
Rocker Key:  
7
Scroll Up-Down,  
press and hold  
to Select-Set  
20 Strap mount  
*/Scroll left/  
P (pause)  
8
4
Microphone  
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Display description  
1
Battery charge level:  
Fully charged  
Empty  
Charging  
2
3
Roaming  
(receiving service on another network than your home network)  
Calling status:  
-
-
Blinking: call setup  
On: call in progress  
4
Short Message status:  
-
On: new message waiting  
Blinking: Short Message memory full  
-
5
6
7
8
IRIDIUM system operation  
GSM cellular operation  
Incoming signal strength level  
Number/text display area:  
-
Numbers/text: 4 lines of 14 characters  
On the lower right corner: “V” = vibration alert is on  
-
9
10  
Left Softkey function label  
Rocker Key function:  
Scroll Up/Down  
Volume Increase/Decrease (during a call)  
Switch between Uppercase/Lowercase (during text entry)  
Right Softkey function label  
11  
Getting Started  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
2. Your First Call  
PULL UP THE ANTENNA  
Your KI-G100 phone is equipped with an extendable antenna. It is normally  
possible to make or receive calls with the antenna in, but better quality is  
obtained with the antenna extended.  
Fully extend the antenna before making or receiving a call. Never hold or  
touch it during the call.  
Push the antenna in only after the call has ended.  
TO MAKE A CALL  
Before dialling a number, make sure that the coverage is sufficient, - a network  
name is displayed and there are at least 2 bars on the signal strength indicator.  
In case of poor coverage conditions, the reception quality may be improved by  
changing location (e.g. in a building move near to a window).  
Dial a telephone number, including the full area  
code, even if you are making a local call.  
021599183  
96  
If you make a mistake, use the  
(Clear) key:  
-
short press: clear the last digit  
long press: clear the complete number  
-
Call  
Save  
Press (Call) or  
to make the call  
TO RECEIVE A CALL  
The phone is ringing, the red light on top of the  
phone is blinking and “Incoming Call” is displayed:  
Incoming  
Call  
Press  
key to answer the call  
(Answer),  
or hold down the  
Answer  
Note: while the phone is ringing, you can use the Rocker Key  
adjust the Ring volume.  
(5 6) to  
6
Your First Call  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
TO ADJUST THE VOLUME  
During a conversation, the volume can be adjusted  
Call  
Active  
with the Rocker Key  
(+ -).  
02159918396  
1m32  
After the call the volume returns to its original  
setting (set in the Menu option “14 Ear Volume”).  
V
Menu  
Mem  
TO MUTE THE MICROPHONE  
During a call the microphone can be muted so that  
your caller cannot hear you but you still can hear  
them.  
In Call Menu  
Tones Off  
Mute  
Quit  
OK  
Press (Menu)  
Quit  
Scroll with  
the In-Call Menu  
(5 6) to the option “Mute” in  
Press (OK) to confirm  
Calls  
muted  
To reconnect the microphone,  
press (Unmute) or hold down the  
key  
Unmute  
TO END OR REFUSE A CALL  
The key is used to end a call you have made or received, and also to refuse  
an incoming call.  
TO REDIAL  
In standby mode or during a call, the last 5 numbers  
dialled can be recalled and redialled.  
01:Dialled  
Press  
to recall the outgoing call log  
021599183  
96  
Scroll  
redial  
Press  
(5 6) to the desired number to  
Call  
Quit  
to redial it  
See also the Menu option “2 Dialled” page 26.  
TO SWITCH OFF  
Press and hold  
until “Powering Down...” is displayed.  
Your First Call  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
3. Extra Dialling Services  
ABBREVIATED DIALLING  
There are different ways to recall and dial a phone number from the Phonebook:  
Speed retrieval  
In standby mode, scroll with  
desired number in the Phonebook.  
(5 6) to the  
038 (SIM)  
Richard  
+492159918396  
Only the entries from the SIM Card’s memory  
are listed here.  
Call  
Quit  
Press (Call),  
, or hold down the  
key to call the selected number  
Direct access  
In standby mode, enter a memory location number (of 1 to 3 digits)  
If you make a mistake, use the (Clear) key:  
-
short press: clear the last digit  
long press: clear the complete number  
-
Press  
Phonebook  
or scroll (5 6) from the desired location number in the  
Press (Call),  
, or hold down the  
key to call the selected number  
Alphabetic access (see also page 24)  
In standby mode or during a call, press  
to recall the Memory Menu  
(Mem)  
Memory Menu  
0 Quit  
1 Phone Book  
2 Dialled  
OK  
Press  
Press  
Press  
to select the submenu “1 Phone Book”  
to select the submenu “1 Find”  
to select the option “1 Name”  
4
Quit  
Enter the beginning of a name (see p. 24)  
Press (OK) or hold down the  
key to view the matching name (if any)  
, or hold down the key to call the selected number  
scroll with  
(5 6) from the desired name in the Phonebook  
Press (),  
8
Extra Dialling Services  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
CALLER LOG  
Your KI-G100 is equipped with a caller log for identified calls (with telephone  
number if Calling Line Identification is available) that have been received. To  
recall this caller log, press  
“3 Received” page 26).  
(Mem) and  
. See also the Memory Menu option  
CALLING LINE IDENTIFICATION  
The Calling Line Identification (CLI) service enables  
your phone to display the phone number of your  
caller. However, this will only occur if both parties  
have this service activated (see Menu “44 Caller id”  
p. 20).  
Incoming  
Call  
+3222241810  
Answer  
IN-CALL MENU  
During a call, you have access to a special “In-Call”  
Menu (the availability of its options depend on the  
call status, see next section).  
In Call Menu  
Quit  
Hold  
End  
OK  
Press (Menu) to access the In-Call Menu  
Quit  
Select with  
Hold  
(5 6):  
to put the active call on hold (e.g. to make a second call)  
to reactivate a held call  
to select one of the parties to be put on hold  
to put the active parties on hold and reactivate the held  
ones  
or Retrieve  
or Exclude  
or Swap  
End  
to hang up the active call  
or Drop  
(Join All)  
(Hold all)  
(Private)  
Tones Off  
or Tones On  
(Cost  
to select one of the parties to be hanged up  
to reactivate all parties (if multiparty call, all parties held)  
to put all parties on hold  
to activate one party only and leave all others on hold  
to switch off the DTMF tones  
to switch on the DTMF tones  
to display cost information (if available)  
to display total cost information (if available)  
to mute the microphone  
or Total Cost)  
Mute  
Quit  
to leave the In-Call Menu and return to the In-Call screen  
Press (OK) to confirm  
Extra Dialling Services  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
CALL WAITING, CALL HOLD AND MULTIPARTY CALLS  
The GSM services “Call Waiting” and “Call Hold” allow you to put an active call  
on hold to be able to answer a waiting call or initiate a new call. The “Call  
Waiting” function can be activated in menu “43 Waiting”. If this function is  
disabled, you will not be notified of a waiting call. A second caller will either hear  
the busy tone or their call will be diverted according to the set diversion. If the  
function is enabled, the caller will hear the ringing tone and you will be also  
notified.  
The “Multiparty” (Mtpy) service allows you to speak to up to 5 other parties on  
the same call.  
Active call(s) and waiting call  
One or more calls are active and a new one is waiting (indicated by a signal tone  
through the earpiece and red light on top of the phone blinking):  
Press  
then  
or  
to end all active and held calls and  
to accept the new call,  
Call  
Waiting  
+491795905001  
1m32  
2/2  
Press (Menu) to access the Call Waiting  
Menu  
Menu  
Mem  
Select with  
Answer  
Replace  
Reject  
(5 6):  
to answer the waiting call, thus putting on hold the active ones  
to hang up all active calls and accept the new one  
to reject the waiting call. Their call will be dropped.  
to let the waiting caller hear the busy tone or let their call  
being diverted if the diversion When Busy has been set  
to leave the Call Waiting Menu  
I am busy  
Quit  
Press (OK) to confirm  
To put an active call on hold to make a second call  
Press (Menu) to access the In-Call Menu  
Select with (5 6) the option “Hold”  
Call  
Active  
Press (OK) to confirm  
02159918396  
1m54  
Dial a number and make the second call  
Menu  
Mem  
10  
Extra Dialling Services  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
To swap between active and held call(s)  
Press (Menu) to access the In-Call Menu  
Call  
Active  
+491795905001  
1m32  
1/2  
Select with  
(5 6):  
Retrieve  
if there is only one held party and  
one active call  
Swap  
if there are more held parties and  
active calls  
Menu  
Mem  
Press (OK) to confirm  
To manage a “Multiparty” call  
A multiparty call can be managed with the “Exclude”, “Drop”, Join All”, “Hold All”  
and “Private” options of the In-Call Menu (see previous section).  
MANNER TALK MODE  
The Manner Talk Mode allows you to make a call in  
noisy environment with a higher comfort. The  
Call  
sensitivity of the microphone is increased and  
Active  
surrounding noises are filtered so you don’t need to  
02114973185  
speak louder, and the earpiece volume is  
increased.  
When the Manner Talk Mode is activated, “M” is  
displayed above the right softkey’s label.  
1m32  
M
Menu  
Mem  
During a call, a long press on  
mode.  
activates or deactivates the Manner Talk  
Extra Dialling Services  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
4. Menus  
Please read this introduction to get the most out of the menus and their features.  
-
Your KI-G100 features 2 principal menus: the Main Menu and the Memory  
Menu.  
-
-
The menu structures are illustrated at the end of this introduction.  
In standby mode, the Main Menu can be accessed by pressing the left  
Softkey  
(Menu) and the Memory Menu by pressing the right Softkey  
(Mem) or holding down the Rocker Key  
.
-
Scroll in a menu by using the Rocker Key  
(5 6) or access a menu  
option directly by entering its menu access code.  
A menu or option is selected when it is highlighted.  
The 4 symbol beside a menu option indicates the presence of a submenu.  
-
-
-
The isymbol indicates the option which is currently set.  
-
-
-
A selected option can be confirmed by pressing  
(OK) or holding down the  
key, then a sub-menu or a result screen is displayed.  
In a menu, pressing the End Key  
will move back to the previous menu  
level.  
When a call is received while you are in the menu mode, the menu function  
is automatically interrupted. Simply accept the call by pressing the Call Key  
.
-
During a call, only special In-Call menus are available.  
HOW TO USE THE MENUS  
You may access a menu option in 2 different ways:  
Example: access to the function “Display the duration of the last call” of the Main  
Menu.  
(Network Name)  
(Standby mode)  
Menu  
Mem  
12  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
A. Access the menu option by scrolling  
Press (Menu) to access the Main Menu  
Menu  
0 Quit  
1 Settings  
2 Messages  
OK  
4
Quit  
Scroll with  
(5 6) to option “3 Costs”  
Menu  
2 Messages  
3 Costs  
4 Services  
OK  
4
Quit  
Press  
submenu “Costs”  
(OK) to confirm and enter the  
Costs  
0 Quit  
1 Last Call  
2 All Calls  
OK  
4
Quit  
Press  
(OK) to confirm and enter the  
submenu “Last Call” already selected  
Last Call  
1 Cost  
2 Duration  
0 Quit  
Scroll with  
(5 6) to option “2 Duration”  
Press  
(OK) to confirm and read the last call  
OK  
Quit  
duration  
B. Access the menu option directly by entering its access code  
Enter the sequence  
(MENU 312).  
(Menu)  
to recall the function directly  
In the following descriptions, we will simply label any menu or option with its  
direct access code.  
Menus  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
MAIN MENU STRUCTURE  
(continued on next page)  
14  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
(from previous page)  
Note: Menu “8 IRIDIUM” is only  
available when the KI-G100 is docked  
on the Iridium Adapter SD-66K  
(optional)  
MEMORY MENU STRUCTURE  
Mem  
1 Phone Book  
1 Find  
2 New  
3 Edit  
4 Delete  
2 Dialled  
3 Received  
4 Erase  
5 Own Number  
Menus  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
MAIN MENU  
1 SETTINGS  
This menu allows you to choose particular settings for your phone.  
11 Language  
select one of 13 languages for the display screens  
If you have selected another language and wish to  
get back to English, enter the sequence:  
(Menu)  
, scroll to “English” and confirm  
12 Ringer  
1 Ring Type  
select one among 6 different ringing tones  
2 Ring Volume  
3 Ring/Vibrate  
select a volume level or the stepped increasing volume  
select how an incoming call is notified. If Vibrator is  
selected, “V” is displayed on the standby screen.  
set how long the ringing tones will sound  
4 Eyes Call  
13 Any Key Answer if set, any key except  
will answer an incoming call  
set the default earpiece volume  
set the keypad tone volume  
14 Ear Volume  
15 Key Volume  
16 DTMF Tones  
switch on or off the generator of Dual Tone Multi  
Frequency tones generator for the control of answering  
machines, homebanking etc during a call  
17 Display  
1 Backlight  
2 Contrast  
switch on or off the automatic backlighting  
set the LCD panel contrast  
2 MESSAGES  
Your KI-G100 phone is able to receive and send SMS (Short Message Service)  
text messages. These are stored on the SIM Card, not in phone itself, and their  
number depends on the Card’s storage capacity. As soon as a new message is  
received, the  
symbol is displayed and will only disappear when all new  
messages are read. You can directly call (or transfer into the Phonebook) the  
telephone number given in the message itself. A received message can be  
edited and resent.  
Broadcast messages such as traffic or whether information are sent from the  
network to a group of users.  
16  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
21 Text  
1 Read new  
read all unread message(s) that have been received:  
(5 6)  
Scroll in the message with  
Press (Menu) to access the Message Menu and select  
1 Read Next (appears only if there is at least one other to read)  
2 Edit  
to edit the message (see next section)  
to reply to the message’s sender (see next section)  
to extract the number included in the message  
to erase the message  
3 Reply  
5 Extract  
6 Erase  
7 Info  
to display additional information about this message  
2 Read all  
3 Create  
read all messages: same procedure as above  
write a new message:  
Enter a message (max. 160 characters)  
-
To enter a letter, press a key several times until the desired  
letter appears (see keypad allocation page 29)  
-
-
Use  
(A/a) to toggle between upper- and lowercase  
(Clear) key:  
If you make a mistake, use the  
- short press: clear the last character  
- long press: clear the complete entry  
Press (OK) and enter a destination number  
to access the Create Message Menu and select:  
1 Save  
2 Send  
to save the message first  
to send the message first  
4 Settings  
changing of message control settings:  
1 Msg Centre tel no. of the network unit which routes the messages  
2 Reply Path let the answer to your message be prepaid  
3 Valid per  
set the validity duration for not transmitted message  
22 Broadcast  
1 Read new  
read unread message(s) sent by the network  
Scroll in the message with  
(▲ ▼)  
Press (Menu) to access the Message Menu and follow the same  
procedure as in previous section  
2 Read all  
read all messages: same procedure as above  
3 Configuration select the type and language of the messages to be  
Menus  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
received from the net work  
3 COSTS  
An indication of the cost of a call and its duration can be displayed during the  
call itself or after it. You can also see an indication of the cumulative cost of all  
calls and their total duration since the last reset.  
Since the currency factor and monetary unit for the cost indication is stored on  
your SIM Card, the PIN2 code of the SIM Card is required to modify them  
(contact your Service Provider to obtain the PIN2 code of the SIM Card).  
Note: if you enter the wrong PIN2 code 3 times in succession, the PIN2  
function of your SIM Card is blocked and you must enter the PUK2 code  
to release it (contact your Service Provider).  
A charge or duration limit can be set so that when elapsed, calling becomes  
automatically impossible. The PIN2 code of your SIM Card is also required to  
activate and manage this function.  
31 Last Call  
1 Cost  
2 Duration  
display an indication of the cost of the last call  
display the duration of the last call  
32 All Calls  
1 Cost  
2 Duration  
3 Reset  
display an indication of the cumulative cost of all calls  
display the cumulative duration of all calls  
reset the cumulative cost and duration timers  
33 Max cost  
1 Read Limit  
display the set charge or duration limit (PIN2 required)  
2 Change Limit change the charge or duration limit (PIN2 required)  
34 Currency  
1 Read  
2 Change  
display the set currency (PIN2 required)  
change the charge or duration limit (PIN2 required)  
18  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
4 SERVICES  
41 Barring  
This service must be included in your subscription package to be accessible.  
Your Service Provider will then give you a Barring Password to set and clear  
barrings.  
Select  
1 Int. calls  
2 Except home  
to inhibit outgoing international calls  
to inhibit outgoing calls except those to your home  
network  
3 Incoming  
to inhibit all incoming calls or only incoming calls when  
you are roaming (receiving service other than from your  
home network)  
4 Outgoing  
5 Cancel all  
6 Password  
to inhibit all outgoing calls  
to clear all barrings at the same time  
to modify your Barring Password  
Confirm  
Eventually, select “All Calls” or “If Abroad” for the option “3 Incoming” and  
confirm again  
Enter your Barring Password and confirm  
42 Divert  
You can choose to divert your incoming calls to another telephone anywhere (for  
example to your office or a friend’s house) or to your Voicemail, so that you are  
not disturbed, e.g. in a meeting or a restaurant. You can decide whether you  
want to divert all calls or those if you are engaged, if you don’t wish to answer  
and/or are unreachable.  
Select  
1 All Calls  
2 When busy  
3 No answer  
to divert all incoming calls  
to divert incoming calls while you are engaged on a call  
to divert incoming calls if you don’t answer within a  
certain time that you can set between 5 and 30 seconds  
to divert incoming calls if your phone is switched off or is  
out of coverage  
4 Not found  
5 Cancel all  
to clear all diversions at the same time  
Menus  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Confirm, enter a new or edit the current destination number, and confirm  
Eventually, select a duration for “Divert on No answer” and confirm  
43 Waiting  
With this menu you can switch the “Call Waiting” function on or off, or check the  
function status within the network. If it is on, you will be notified that a caller is  
waiting while you are already engaged (provided that there is no diversion set of  
all calls, see previous section). If the function is off, you will not be informed that  
a second call is waiting and the caller will hear the busy tone or their call will be  
diverted if diversion When busy is set. See “Call Waiting, Call Hold and  
Multyparty Calls” information on page 10.  
44 Caller id  
With this menu you can choose whether the telephone number of someone or a  
party calling you will be displayed (provided the function is activated on their  
side) and whether your telephone number will be transmitted to someone or a  
party you are calling.  
Select and confirm  
1 Far id  
2 Your id  
to set the display of the number of someone calling you  
to set the display of your number to someone you are  
calling  
Select and confirm  
1 Presentation  
2 Restriction  
to enable the telephone number display  
to inhibit the telephone number display  
5 NETWORK  
If your home network is not in range your phone tries to register onto another  
available GSM 900 network, following the priority given in the network list stored  
on your SIM Card. This menu allows you to edit this list.  
If no network from the list has been found, the phone will then try to register on a  
network listed in the phone’s network list.  
20  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
6 SECURITY  
Here you can lock the keypad, enable or disable the SIM Card’s PIN check,  
change its PIN code, change its PIN2 code, enable or disable the Fixed Dialling  
Memory (FDN) function.  
61 Key Lock  
The keypad can be locked in standby mode to avoid any undesired function (e.g.  
accidental dialling). In that case, only the key  
phone.  
can be used to switch off the  
To unlock the keypad in standby mode, press and hold the left Softkey  
.
During an incoming call, you will be prompted to  
unlock the keypad to answer the call:  
Keylock Off?  
OK  
Press (OK) and then  
to answer the call  
62 PIN  
If this function is activated, your SIM Card is protected against unauthorised use  
with a Personal Identification Number (PIN) of your choice, that will be requested  
each time the phone is switched on.  
63 New PIN  
You can change here the PIN code of your SIM Card. It must contain a minimum  
of 4 and a maximum of 8 digits.  
Caution: if you enter the PIN code incorrectly 3 times, your SIM Card  
will be blocked and you must enter the PUK code to unblock it (see  
section “6. Problem Solving / Helpful Hints”).  
64 New PIN2  
The PIN2 code of your SIM Card allows you to access some special functions of  
the SIM Card such as the setting of charge parameters (see Menu “3 Costs”) or  
the Fixed Dialling Numbers function (see Menu “65 FDN”).  
Menus  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
You can change here the PIN2 code of your SIM Card. It must contain a  
minimum of 4 and a maximum of 8 digits.  
Note: if you enter the wrong PIN2 code 3 times in succession, the PIN2  
function of your SIM Card is blocked and you must enter the PUK2 code  
to unblock it (contact your Service Provider).  
65 FDN  
The PIN2 code is required to enable or disable this function. If it is enabled, only  
Fixed Dialling Numbers stored on the SIM Card, extensions of these numbers  
and emergency numbers can be dialled. The access to the SIM memory is also  
restricted. This can be used for example when you lend your phone to someone  
else and wish them to be only able to call certain numbers, e.g. in your office.  
This setting has no effect on the Short Messages function.  
Note: switching FDN on or off may require dozens of seconds.  
7 ACCESSORY  
You can set some parameters for the use of your phone in a vehicle, with the  
Hands Free Kit (see page 31).  
71 Auto Answer  
With this function activated, a call will be answered automatically after 2 rings.  
This will only occur if the ignition is on.  
72 Off Timer  
You can set here the delay after the ignition key has been removed the phone  
will be powered off. The Off Timer can be set within a range from 0 to 99  
minutes.  
22  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
8 IRIDIUM  
This menu allows you to perform the settings related to the IRIDIUM satellite  
operation. It is only shown when the IRIDIUM Adapter (accessory) is attached.  
Please refer to the section “5. IRIDIUM” for more information.  
81 Registration  
This performs a manual registration request on the IRIDIUM satellite network.  
82 DTMF Tones  
You can choose here whether the DTMF tones will be transmitted during a call  
for a fixed period of time when keys are pressed (setting “Short”) or as long as  
the keys are being pressed (setting “Long”).  
83 Services  
The settings for Call Barring, Call Divert and Call Waiting on the IRIDIUM  
network can be performed in a similar way as in Menu “4 Services” for the GSM  
cellular operation.  
Please notice, however, that Call Barring can only be set for all incoming and/or  
all outgoing calls, and that Call Divert on No Answer is not available.  
84 Modes  
Should both a GSM cellular network and the IRIDIUM satellite network be in  
range of your phone, your KI-G100 phone with its IRIDIUM attachment will  
register on one of them according to the priority set in this menu. If a preferred  
mode is stored in the SIM Card, this one will be adopted automatically.  
Select and confirm  
1 GSM only  
to allow the phone to register always on a GSM cellular  
network, never on the IRIDIUM satellite network  
to allow the phone to register always on the IRIDIUM  
satellite network, never on a GSM cellular network  
to allow the phone to register on both, but with priority  
on a GSM cellular network  
2 IRIDIUM only  
3 Dual-1  
4 Dual-2  
to allow the phone to register on both, but with priority  
on the IRIDIUM satellite network  
Menus  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
MEMORY MENU  
1 PHONEBOOK  
Your Phonebook consists in 3 different memories for storing phone numbers:  
SIM Card Memory: memory locations 1 to 300  
Phone Memory: memory locations 301 to 600  
FDN (Fixed Dialling Numbers) SIM Memory: memory locations 601 to 999  
The number of possible entries in the SIM and FDN Memories depends on the  
capacity of your SIM Card.  
11 Find  
1 Name  
search a Phonebook entry by name or location number  
Enter the beginning of a name  
-
To enter a letter, press a key several times until the desired  
letter appears (see keypad allocation page 29)  
-
-
Use  
(A/a) to toggle between uppercase and lowercase  
(Clear) key:  
short press: clear the last character  
long press: clear the complete entry  
If you make a mistake, use the  
-
-
Press (OK) to view the matching name (if any)  
Scroll  
(▲ ▼) from the desired name. Entries are sorted  
alphabetically  
Press (Call) or  
to call the selected number  
2 Location  
Enter a location number (1 to 3 digits)  
Press  
to view the matching name (if any)  
Scroll  
location number  
(▲ ▼) from the desired name. Entries are sorted by  
Press (Call) or  
to call the selected number  
24  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
12 New  
create an entry in the Phonebook (SIM, Phone or FDN Memory  
according to the location number)  
Enter a name  
-
To enter a letter, press a key several times until the desired  
letter appears (see keypad allocation page 29)  
-
-
Use  
(A/a) to toggle between upper- and lowercase  
(Clear) key:  
short press: clear the last character  
long press: clear the complete entry  
If you make a mistake, use the  
-
-
and confirm it  
Enter the telephone number (use  
it  
to insert a pause) and confirm  
Select the “Phone”, “SIM” or “FDN” Memory, and confirm  
Eventually, enter and confirm the PIN2 code to access the FDN  
Memory  
Eventually, edit the suggested location number, and confirm  
13 Edit  
change an entry in the phonebook (SIM, Phone or FDN Memory  
according to the location number)  
Find the entry to edit (same procedure as in menu “11 Find”)  
Edit name and number, and confirm  
Select “Overwrite” to keep the same location number or “Other” to  
change it, and confirm  
If “Other” has been chosen, select the “Phone”, “SIM” or “FDN”  
Memory, and confirm,  
Eventually, enter and confirm the PIN2 code to access the FDN  
Memory  
Eventually, edit the suggested new location number, and confirm  
14 Edit  
delete an entry in the phonebook (SIM, Phone or FDN Memory  
according to the location number)  
Find the entry to delete (same procedure as in menu “11 Find”)  
Eventually, enter and confirm the PIN2 code to access the FDN  
Memory  
Confirm the deletion of the entry  
Menus  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
2 DIALLED  
This function allows you to display the 10 last dialled numbers. These are either  
stored on the SIM Card (if the SIM supports this function) or in the phone. If you  
dial the same number more than one time, this number will appear only once in  
the list.  
You can recall the dialled number list to call again or store in the phonebook a  
particular number (option “Save”).  
3 RECEIVED  
Your KI-G100 phone is equipped with a caller log for identified calls (with  
telephone number if Calling Line Identification is available) that have been  
received. If you have been called by the same number more than one time, this  
number will appear only once in the list.  
You can recall the received number list to call back or store in the phonebook a  
particular number (option “Save”).  
4 ERASE  
This function allows you to clear completely the SIM, Phone or FDN Memory.  
The process may require dozens of seconds.  
Select the “Phone”, “SIM” or “FDN” Memory, and confirm  
Eventually, enter and confirm the PIN2 code to access the FDN  
Memory  
5 OWN NUMBER  
The phone number of your SIM Card can be recalled, for example to give it to  
someone. Should this number not be stored already on the SIM Card, you can  
enter it here.  
Press the “Edit” softkey and enter your SIM Card telephone number  
Press the “Save” softkey to store it  
26  
Menus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
5. IRIDIUM  
By attaching the Kyocera IRIDIUM Adapter SD-66K (accessory) to your KI-G100  
phone, you transform it into an IRIDIUM compatible handset capable of  
communicating directly with the IRIDIUM satellite network.  
The IRIDIUM network consists of 66 satellites covering 100% of the earth  
surface, 100% of the time. This makes it possible for the IRIDIUM system to  
offer communications anywhere, anytime, to anyone.  
The network uses six polar orbital planes at an angle of 86.4 degrees to the  
equator. Each orbital plane contains eleven operational satellites and a spare  
one placed in a storage orbit below the eleven operational satellites. The  
satellites orbit at a speed of approx. 28000 km/h and at an altitude of 780 km or  
421.5 nautical miles making the IRIDIUM constellation a low earth orbit system.  
The six satellite rings are slowly moving to the west due to the Earth’s rotation  
from west to east. The satellites make their closest approach to one another  
over the north and south pole, but never come closer to one another than 195  
kilometres or 105 nautical miles. The satellites carry enough fuel on board to  
remain in orbit for 8 years. The normal life expectancy of a single satellite is 5 to  
8 years.  
IRIDIUM  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Each IRIDIUM satellite is communicating with the next one, so that a call is  
routed within the constellation before it goes down to earth via a terrestrial  
gateway. A single IRIDIUM satellite footprint has a diameter of approx. 4400 km.  
As the user approaches the perimeter of the satellite’s footprint a second  
satellite footprint appears. Once the user is within the coverage of the second  
satellite footprint a hand off to the second satellite occurs. Satellite handoffs  
continue to occur so every 9 minutes approximately as long as the IRIDIUM user  
is on air.  
With conventional terrestrial cellular systems, the cells are fixed and the user  
moves from cell to cell causing handoffs to occur. In the IRIDIUM system the cell  
pattern moves across the user’s location which causes handoffs to occur.  
Although it uses a satellite network instead of a terrestrial one, IRIDIUM is also a  
GSM operator, interconnecting in the same way with other GSM terrestrial  
operators and using the same type of SIM Cards. Therefore, unless you use an  
IRIDIUM SIM Card, you can “roam” on the IRIDIUM network as you would do so  
on another GSM network provided you have the IRIDIUM Adapter attached to  
your KI-G100 phone and your home Network Operator has a Roaming  
Agreement with Iridium.  
When using your KI-G100 phone with its IRIDIUM Adapter on the IRIDIUM  
network, please make sure that you are located outside, in a free area, i.e. not  
between tall buildings (“urban canyon”) or trees that would limit the satellite  
visibility. Always dial a telephone number with its country code (e.g. +49 2159  
918396).  
28  
IRIDIUM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
6. Problem Solving / Helpful Hints  
IN CASE OF A PROBLEM  
Before contacting the Kyocera Helpline, please observe the following.  
If the display shows “PIN is blocked”:  
The PIN code has been entered incorrectly three times, you need the  
PUK (PIN Unlocking Key) to release it.  
Decide on a new PIN  
Enter the following sequence:  
[PUK]  
[new PIN]  
[new PIN]  
.
Caution: if you do not know your PUK, do not try to unblock your  
SIM Card, as this will lead to it becoming permanently blocked, and  
you will be charged by your Service Provider for a replacement SIM  
Card. Contact your Service Provider who will give you the PUK and  
help you to unblock your SIM Card.  
If none of the  
,
and symbols are showing:  
The network connection is lost. Either you are in a radio shadow (in a  
tunnel or between tall buildings) or you are outside of the network  
coverage area. Try from another place.  
If the display doesn’t respond (or responds slowly) to key presses:  
The display responds more slowly at very low temperatures. This is  
normal and does not affect the operation of the phone. Take the phone to  
a warmer place and try again.  
If your phone does not go to the standby mode:  
Switch off the phone, check that the SIM Card and battery are installed  
correctly and switch on again.  
Problem Solving / Helpful Hints  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
MAINTENANCE  
The equipment i.e. phone and charger do require some care. Please observe  
the following:  
Store it in a clean, dust-free space. Its moving parts can be damaged by  
dust.  
Keep it away from hot locations. High temperatures can shorten the life of  
the electronic components and batteries, and warp or melt certain plastics.  
Do not try do disassemble the phone. If it is not working properly, call the  
Kyocera Helpline.  
Use only the recommended battery chargers.  
Treat the phone gently and avoid dropping, knocking or shaking it.  
Keep the equipment out of reach of small children.  
Keep the phone dry and do not use harsh chemicals (such as solvents or  
detergents) to clean it. To clean the phone, wipe it with a soft cloth slightly  
dampened with a mild solution of soap and water.  
Always let your battery discharge completely before recharging it.  
KEYPAD LETTERS ALLOCATION  
The table below shows how letters are allocated to the 10 number pad keys.  
30  
Problem Solving / Helpful Hints  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
TECHNICAL DATA  
KI-G100 (main unit)  
Max. output power:  
Power supply:  
Standby time GSM*:  
Talk time GSM*:  
Standby time IRIDIUM*:  
Talk time IRIDIUM*:  
SIM Card size:  
2 Watt  
DC 3.6 V - 600 mAh Li-Ion battery  
approx. 70 hours  
approx. 120 minutes  
approx. 24 hours  
approx. 100 minutes  
Plug-In  
Dimensions (excl. Antenna):  
Weight:  
approx. 130 x 41 x 22 mm (L x W x H)  
99 g  
Operating temperature:  
Data speed:  
-10°C ~ 55°C  
9600 bps  
* depending on network coverage and system parameters offered by the  
network operator.  
AC-G100 (AC Charger)  
Dimensions:  
Weight:  
approx. 130 x 40 x 25 mm (L x W x H)  
60 g  
Input:  
Output:  
AC 90~240 V, 50/60 Hz, 4 VA  
DC 4.1 V, 600 mAh  
Charging time:  
approx. 90 minutes  
LICENSING  
Your KI-G100 phone and its accessories detailed in the following section are  
authorised for use on GSM 900 networks.  
The phone complies with EU standards  
... (tbc)  
...  
confirmed by the CE label.  
Problem Solving / Helpful Hints  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
7. Accessories  
The following Kyocera original accessories have been designed especially to  
work with your KI-G100 phone. Additional accessories may be available and are  
sold separately. Please contact your local Service Provider or retail outlet for  
more information.  
GSM ACCESSORIES  
DC Charger GC (Ref. DC-G100)  
Two Way Cable GC (Ref. TW-G100)  
Desktop Charger GC (Ref. DE-G100)  
Hands Free Kit GC (Ref. HF-G100)  
Data Cable GC (Ref. DA-G100)  
Car Holder GC (Ref. CH-G100)  
32  
Accessories  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Soft Case GC (Ref. SG-G100)  
External Antenna GC (Ref. OA-G100)  
Personal Hands Free GC (Ref. EM-G100)  
Accessories  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
IRIDIUM ACCESSORIES  
IRIDIUM Adapter (Ref. SD-66K))  
IRIDIUM Hands Free Kit  
(Ref. HF-S100)  
IRIDIUM AC Charger (Ref. AC-S100)  
IRIDIUM DC Charger (Ref. DC-S100)  
34  
IRIDIUM Car Holder (Ref. CH-S100)  
IRIDIUM External Antenna  
(Ref. OA-S100)  
Accessories  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
IRIDIUM Solar Power Supply  
(Ref. SP-S100)  
Personal Hands Free GC  
(Ref. EM-G100)  
Data Cable GC (Ref. DA-G100)  
IRIDIUM Separate Vibrator  
(Ref. SV-S100)  
IRIDIUM Two Way Cable  
(Ref. TW-S100)  
Accessories  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Index  
(to be inserted in the final version)  
36  
Index  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Notes:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Emergency Call  
TO MAKE AN EMERGENCY CALL:  
Press and hold  
to switch on the phone  
If required, enter the SIM Card’s PIN code and confirm with (OK)  
Enter  
Press  
(112 is the international GSM emergency call number)  
to make the call  
Give the following information to the emergency service:  
-
-
-
-
-
-
Your name  
The location of the accident  
What happened  
The number of injured persons (if any)  
When the accident occured  
If possible, give your phone number for callback. Remember to leave your  
phone switched on for incoming calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999  
Short User Guide (credit card size, printed on both sides)  
Side 1:  
Short User Guide  
KI-G100  
To switch on: press and hold  
until a message appears.  
If required, enter the SIM Card’s PIN and confirm with  
Your phone is ready to be used when a network name is  
displayed.  
(OK).  
To make a call: Telephone no.  
To end or refuse a call:  
To redial:  
To receive a call (telephone ringing, light blinking):  
To switch off: hold  
until “Powering Down...” is displayed.  
Side 2:  
Abbreviated dialling  
a.  
b. 1 to 3 digit location number  
c.  
(Mem)  
Letter or name  
(OK)  
Menu:  
To access the menu:  
(Men)  
To scroll/select an option:  
To confirm: (OK)  
To move back to the previous menu level:  
To exit a menu:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krell Industries Stereo Receiver REFERENCE 64 User Manual
Leica Projection Television CM1510 S User Manual
LG Electronics Washer 2P~32P User Manual
Liebherr Refrigerator HCS 20 User Manual
Life Fitness Treadmill T30 T35 User Manual
Lochinvar Water Heater IB 1500 User Manual
Makita Sander 9032 User Manual
Mamp;S Systems Intercom System MC111DM User Manual
Meade Telescope DS 114AT User Manual
Memorex CRT Television MT2245 User Manual