KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
MODULAR TBUS-6xl
Table Connection Bus
P/N: 2900-300073 Rev 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Figures
TBUS-6xl – Contents
i
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers, GROUP 2: Switchers and Matrix
Switchers, GROUP 3: Control Systems, GROUP 4: Format/Standards Converters,
GROUP 5: Range Extenders and Repeaters, GROUP 6: Specialty AV Products,
GROUP 7: Scan Converters and Scalers, GROUP 8: Cables and Connectors,
GROUP 9: Room Connectivity, GROUP 10: Accessories and Rack Adapters, and
GROUP 11: Sierra Products.
Thank you for purchasing the Kramer TBUS-6xl enclosure, which is ideal for
boardrooms, conference and training rooms!
Note that the inner frame, power socket assembly, power cord and
other inserts for the TBUS-6xl enclosure are purchased separately.
i
TBUS-6xl - Introduction
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•
•
Review the contents of this user manual
Use Kramer high-performance high-resolution cables
user manuals, a complete list of Kramer wall plates and module
connectors, application programs, and to check if firmware
upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•
•
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer TBUS-6xl away from moisture, excessive sunlight and
dust
2.2
Glossary
Inner frame
The inner frame fits into the TBUS enclosure
Universal socket The Universal socket fits almost all power cords, worldwide
Insert
The insert is fitted in the inner frame. Go to our Web site to check for a
variety of single and dual sized inserts
2
TBUS-6xl - Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Overview
The Kramer TBUS-6xl is a high-quality, anodized aluminum, table-mounted
connection bus enclosure for boardrooms and conference rooms. Its attractive
enclosure is designed to provide maximum connectivity in the smallest possible
footprint. The unit is sturdy, cost-effective, and easy to install.
The TBUS-6xl includes:
•
•
•
•
A modular design, letting you tailor the TBUS-6xl according to your
requirements
A black anodized or brushed clear aluminum lid with a special opening for
cable pass-through (note, that other customized colors can also be ordered)
Height adjustment screw holes to set the inner frame (ordered separately) to
the desired height
Power socket openings that are suitable for any of the following power
sockets: for the USA, Germany (the Europlug), Belgium-France, Italy,
Australia, Israel, South Africa or “Universal” for use anywhere (see
Order the power sockets separately from Kramer Electronics
•
An optional insert kit to replace one power socket
The insert kit can include two wall plate module inserts, two cable pass-through
connectors, or one of each
The TBUS-6xl is height-adjustable. The cover that opens and closes manually
retracts into the unit to remain out of sight when the TBUS-6xl is in use. When
closed, all cables and connectors are out of sight under the anodized cover.
Do not place heavy objects on top of the TBUS-6xl.
!
TBUS-6xl - Overview
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Your TBUS-6xl Enclosure
Figure 1: TBUS-6xl Enclosure Top View
#
Feature
Function
1
2
Black Anodized/Brushed Includes an opening for cable pass-through; covers the inner
Clear Textured Lid
Outer Rim
frame, leaving the table surface neat and tidy
Fits over the table surface.
A protective rubber guard protects the outer rim during
shipping. Remove it before installing the unit
3
4
Lid Housing
When opened, the lid retracts into the lid housing
Rubber Protectors
Protect the table surface when mounting the unit (one for
each clamp)
5
6
7
Locking Butterfly
Screws
Tighten to lock the mounting butterfly screw (one for each
clamp)
Mounting Butterfly
Screws
Tighten to secure the unit to the table surface (one for each
clamp)
Mounting Brackets Fit in the bracket slits after inserting the enclosure into the
table – to secure the unit to the table surface (one for each
clamp)
8
9
Bracket Slits
For attaching the two mounting brackets on opposite sides
Height Adjustment
Screw holes
The screw holes on each side panel are used for adjusting the
height of the Inner Frame
10 Tie Holes
11 Enclosure
Insert the self-locking tie through the holes to fix the pass-
through cables to the inside walls of the unit
Inserted into the table cut out
4
TBUS-6xl - Your TBUS-6xl Enclosure
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1
TBUS-6xl Optional Inner Frames
The following inner frames can be installed in the TBUS-6xl enclosure:
Inner Frames for TBUS-6xl
Specifications (defines what you can
include in this inner frame):
T6F-2S (P/N: 80-004399)
2 openings for 2 power sockets
2 RJ-45 connectors
2 USB connectors
Two 3.5mm mini jack AUDIO connectors
2 VGA 15-pin HD connectors
T6F-23 (P/N: 80-004499)
2 openings for 2 power sockets
2 blank inserts
1 pass-through insert
T6F-03M (P/N: 80-005499)
An opening for 1 MegaTOOL, specially
designed for the Kramer SID-X1
3 blank inserts
Custom made inner frames can be designed if required.
Contact Kramer Electronics for more details.
i
4.2
TBUS-6xl Optional Inserts
Accessories
Description
Inserts
You can install any wall plate devices as well as any of
the single or dual inserts—see our Web site for details.
T-2INSERT (P/N: 80-00006699)
The T-2INSERT kit can be installed inside a single
power socket opening and includes:
1 single cable pass-through insert
1 dual cable pass-through insert
TBUS-6xl - Your TBUS-6xl Enclosure
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3
Power Socket Options
A choice of power sockets per inner frame are available in several versions,
including power sockets for the USA, Germany (the Europlug), Belgium-France,
Italy, South Africa, Israel and Australia. A “Universal” socket for general use is also
available (see the compatibility restrictions in the table below).
Power Socket Power Specs
Type
Power Socket
Type
Power Specs
Universal:
TS/1U (80-000899)
Fully compatible with power plugs in the
UK, India, Italy and Denmark, as well as
with the 2-prong Europlug.
100-240V AC, 50/60Hz,
5A
Partially compatible (if the polarity is
reversed) with plugs in China, Switzerland,
Israel and the USA. The universal socket
does not supply grounding to plugs in
Central Europe and France and so you
should order country specific sockets
instead.
Maximum 5A per power
outlet
Not compatible with South African plugs.
Power Socket Power Specs
Type
Power
Socket Type
Power Specs
USA:
TS-1US (80-000999)
Italy:
TS-1IT (80-001499)
100-240V AC, 50/60Hz, 5A
100-240V AC, 50/60Hz, 5A
Maximum 5A per power
outlet
Maximum 5A per power
outlet
Germany and
EU:
TS-1DE (80-001299)
Australia:
TS-1AU (80-001599)
100-240V AC, 50/60Hz, 5A
100-240V AC, 50/60Hz, 5A
Maximum 5A per power
outlet
Maximum 5A per power
outlet
Belgium and
France:
TS-1FR (80-001399)
Israel:
TS-1IL (80-001799)
100-240V AC, 50/60Hz, 5A
220V AC, 50/60Hz, 5A
Maximum 5A per power
outlet
Maximum 5A per power
outlet
South Africa
TS-1ZA (80-001699)
100-240V AC, 50/60Hz, 5A
Maximum 5A per power
outlet
6
TBUS-6xl - Your TBUS-6xl Enclosure
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4
Power Cord Options
You can order any of the following power cords to use with a modular TBUS:
Power Cord Type
6ft/110V (North America)
6ft/125V (Japan)
Description
P/N
C-AC/US (110V)
C-AC/JP (125V)
C-AC/EU (220V)
C-AC/IL (220V)
C-AC/UK (250V)
C-AC/IN (250V)
C-AC/CN (250V)
C-AC/ZA (250V)
91-000099
91-000699
91-000199
91-000999
91-000299
91-001099
91-001199
91-001299
6ft/220V (Europe)
6ft/220V (Israel)
6ft/250V (UK)
6ft/250V (India)
6ft/250V/10A (China)
6ft/250V/10A (South Africa)
TBUS-6xl - Your TBUS-6xl Enclosure
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installing the TBUS-6xl
To install the TBUS-6xl perform the following steps:
1. Assemble the inner frame (see Section 5.1).
2. Install the inner frame (see Section 5.2).
3. Cut an opening in the table (see Section 5.3).
4. Insert the unit through the opening and secure to the table (see Section 5.4).
5. Connect the cables (see Section 5.5).
6. Insert pass-through cables (see Section 5.6)
7. Adjust the height of the inner frame (see Section 5.7).
5.1
Assembling the Inner Frame
The modules mounted on the inner frame can include single inserts and/or dual
inserts as well as a power socket (in some models). This section describes how to
assemble these modules.
Each module kit comes with detailed assembly instructions.
i
5.1.1
Mounting the Inserts
You can rearrange or remove any of the plates mounted on the inner frame and
replace them with Kramer passive wall plates or connector modules for interfacing
A/V type signals.
To mount a Kramer insert or connector module:
1. Unscrew the two screws that fasten the blank plate to the inner frame and
remove the blank plate.
2. Place the required Kramer insert over the opening, insert the two screws to
fix the Kramer insert in place, and tighten them.
8
TBUS-6xl - Installing the TBUS-6xl
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2: TBUS-6xl Inner Frame (P/N: 80-004499)
#
Feature
Function
1
2
3
Power Socket Opening
Suitable for a single power socket or the optional insert kit
for TBUS
Blank Plates
Three blank covers that can be replaced with wall plates
as required
Adjustable Height Screw For adjusting the height of the Inner frame
Holes
5.1.2
Mounting the Power Socket Assemblies
To mount the power socket, place the power socket under the frame in its
appropriate place and tighten with the two screws (supplied).
Power socket kits come with assembly instructions.
i
TBUS-6xl - Installing the TBUS-6xl
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1.3
Installing a MegaTOOL
To install a MegaTOOL, as shown in Figure 3:
1. Screw the supplied spacers to their designated places (one on each side).
2. Insert the MegaTOOL, from beneath, through the MegaTOOL opening.
3. Screw the screws (one on each side) through the frame holes and spacers.
Figure 3: Installing the MegaTOOL
5.2
Installing the Inner Frame
To install the inner frame:
1. Place the inner frame inside the TBUS-6xl enclosure.
2. Set the required height using your fingers to bring the inner frame to the
desired position, screw and tighten it in place using the height adjustment
screws (supplied with the inner frame).
Inner frame kits come with assembly instructions.
i
10
TBUS-6xl - Installing the TBUS-6xl
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3
Cutting an Opening in the Table
To cut an opening in the table:
1. Place the cut out template (that is included with your TBUS-6xl) on the
surface of the table exactly where you want to install the TBUS-6xl.
2. Attach the template to the table with the included screws (if using the cut out
template).
3. Following the inside edge of the template, cut a hole in the table surface
(not to scale).
The thickness of the table should be 76.2mm / 3 inches or less.
i
123+2mm
225+2mm
Figure 4: Cut out Dimensions
4. Unscrew and remove the template from the surface of the table and clean
the table surface.
Take care not to damage the table.
If needed, you can download a full-scale template from our Web site.
Kramer Electronics is not responsible for any damage caused to the
table.
!
TBUS-6xl - Installing the TBUS-6xl
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4
Inserting the TBUS-6xl through the Cut Out Opening
To install TBUS-6xl in the opening:
1. Remove the protective rubber guard from around the outer rim of the
TBUS-6xl housing. Beware of the sharp edge!
2. Carefully insert the unit into the prepared opening (see Figure 5).
3. Take the support brackets under the table and place them into the support
4. Verify proper alignment of the unit before tightening the mounting screws.
5. Tighten both mounting butterfly screws upward until they reach the table
6. Tighten the locking butterfly screws downward until tight against the
mounting bracket.
Figure 5: Inserting TBUS-6xl into the Prepared Opening
12
TBUS-6xl - Installing the TBUS-6xl
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5
Connecting the Cables
When replacing blank inserts with connector inserts (for example, VGA, audio,
HDMI and so on):
1. Insert the cables to their appropriate connectors from underneath.
2. Secure the cables to the tie holes using the included self-locking ties.
Do not secure the cables too tightly or too loosely. Leave a small amount of
slack.
After the TBUS-6xl is connected to mains power and the proper cables, it is ready for
use.
5.6
Inserting Pass-through Cables
When replacing inserts with the pass-through insert, for example, to connect a
laptop, do the following:
1. Remove the two screws attaching the split pass-through bracket.
2. Remove the split grommet.
3. Insert the cable through the rectangular opening.
4. Open the split grommet slightly and insert the required cables.
5. Place the split bracket around the grommet and position this assembly over
the Inner Frame.
6. Place the two screws appropriately and tighten the split bracket together
with the grommet and inserted cables to the inner frame.
7. Insert the self-locking ties through the tie holes to secure the cables to the
inside walls of the enclosure.
TBUS-6xl - Installing the TBUS-6xl
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5.7
Adjusting the Height of the Inner frame
If needed, you can adjust the inner frame height to accommodate large or bulky
cables. To adjust, perform the following:
1. Remove the four height adjustment screws, while supporting the surface
from underneath with your fingers.
2. Raise or lower the inner frame to the required height, insert the screws, and
tighten them in place.
14
TBUS-6xl - Installing the TBUS-6xl
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Using the TBUS-6xl
Once the TBUS-6xl is installed, you can easily customize it to suit your own
requirements by plugging in the required A/V equipment, as illustrated in the
Figure 6: TBUS-6xl Boardroom Installation
TBUS-6xl - Using the TBUS-6xl
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Technical Specifications of the Assembled
TBUS-6xl
POWER SOURCE
(AC power limits):
Power Socket Assemblies
Universal
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
Fully compatible with power plugs in the UK, India, Italy
and Denmark, as well as with the 2-prong Europlug.
Partially compatible (if the polarity is reversed) with plugs
in China, Switzerland, Israel and the USA. The universal
socket does not supply grounding to plugs in Central
Europe and France (you should order country specific
sockets instead).
Not compatible with South African plugs.
USA
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A
Maximum 5A per power outlet
220V AC, 50/60Hz, 5A
Germany and EU
Belgium and France
South Africa
Australia
Israel
Maximum 5A per power outlet
220V AC, 50/60Hz, 5A
South Africa
T 6.3A 250V
Maximum 5A per power outlet
FUSE RATING:
OPERATING TEMPERATURE +5 to +45 Deg. Centigrade
RANGE:
OPERATING HUMIDITY
RANGE:
10 to 90% RHL, non-condensing
STORAGE TEMPERATURE
RANGE:
-20 to +70Deg. C.
STORAGE HUMIDITY RANGE: 5 to 95% RHL, non-condensing
DIMENSIONS:
Top plate: 243mm x 140.4mm (9.6" x 5.5") W, D
Enclosure: 203mm x 102mm x 130mm (8.0" x 4.0" x 5.1")
W, D, H
WEIGHT:
TBUS-6: 2.03kg (4.48lbs) approx.
Table clamps: 0.25kg (0.6lbs)
ACCESSORIES:
OPTIONS:
Power cord, four self-locking ties, template, template
screws
Inner frames, passive wall plates and interfaces, power
socket kits, power cord
Specifications are subject to change without notice at http://www.kramerelectronics.com
16
TBUS-6xl - Technical Specifications of the Assembled TBUS-6xl
Download from Www.Somanuals.com. All Manuals Search And Download.
TBUS-6xl
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
!
Download from Www.Somanuals.com. All Manuals Search And Download.
|