Kenwood Portable DVD Player DVF R5070 User Manual

MULTIPLE DVD/VCD/CD PLAYER

DV-705

DVF-R5070

INSTRUCTION MANUAL

B60-5361-08 00 (K/P/E/Y)

02/02

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DV-705/DVF-R5070 (EN/K,P,E,Y)

Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit

was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original

carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Please confirm that the following accessories are present.

Audio video cord (Red, White, Yellow) ...(1)

Remote control unit ...(1)

Batteries (R6/AA) ...(2)

Preparations

Coaxial cable ...(1)

*AC plug adaptor ...(1)

* Use to adapt the plug on the power cord to the

shape of the wall outlet.

(Accessory only for regions where use is nec-

essary.)

For the U.S.A.

CAUTION:

Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

IncompliancewithFederalRegulations, thefollowingarereproductions

of labels on, or inside the product relating to laser product safety.

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI,

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS NO. 21 CFR

1040.10, CHAPTER 1, SUBCHAPTER J.

Location: Back Panel

CAUTION-

LASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

Location: Laser Pick-up Unit Cover inside this product

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the

modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change

or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful inter-

ference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-

sures:

– – Reorient or relocate the receiving antenna.

– – Increase the separation between the equipment and receiver.

– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– – Consult the dealer or an experienced radio / TV technician for help.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

Caution : Read this page carefully to ensure safe operation.

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please read all of the safety and operating instructions before

operatingthisappliance.Adheretoallwarningsontheappliance

andintheinstructionmanual.Followallthesafetyandoperating

instructions. These safety and operating instructions should

be retained for future reference.

6. Temperature – The appliance may not function properly if

used at extremely low, or freezing temperatures. The ideal

ambient temperature is above +5°C (41°F).

7. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other

appliances (including amplifiers) that produce heat. Do not

place a flaming object, such as a candle or lantern, on or

near the appliance.

1. Power sources – The appliance should be connected to a

power supply only of the type described in the instruction

manual or as marked on the appliance. If you are not sure

of the type of power supply to your home, consult your

appliance dealer or local power company. For appliances

intended to operate from battery power, or other sources,

refer to the instruction manual.

8. Electric shock – Care should be taken so that objects do

not fall and liquid is not spilled into the enclosure through

openings. If a metal objects, such as a hair pin or a needle,

comes into contact with the inside of this appliance, a

dangerous electric shock may result. For families with

children, never permit children to put anything, especially

metal, inside this appliance.

2. Power-cord protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, pay

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

Never pull or stretch

the cord.

9. Enclosure removal – Never remove the enclosure. If the

internal parts are touched accidentally, a serious electric

shock might occur.

^3.CAUTION – Polarization – This appliance may be

equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to

fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

10.Magnetic fields – Keep the appliance away from sources

of magnetic fields such as TV sets, speaker systems,

radios, motorized toys or magnetized objects.

4. Ventilation – Slotsandopeningsinthecabinetareprovided

for ventilation and to ensure reliable operation of the

appliance and to protect it from overheating, and these

openings must not be blocked or covered. The appliance

should be situated so that its location or position does not

interfere with its proper ventilation.

11.Cleaning – Unplug this appliance from the wall outlet

before cleaning. Do not use volatile solvents such as

alcohol,paintthinner,gasoline,orbenzine,etc.tocleanthe

cabinet. Use a clean dry cloth.

To maintain good ventilation, do not put records or a table-

cloth on the appliance. Place the appliance at least 10 cm

away from the walls.

12.Accessories – Do not place this appliance on an unstable

cart, stand, tripod, bracket, or table. The appliance may fall,

causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand,

tripod,bracket,ortablerecommendedbythemanufacturer,

or sold with the appliance. Any mounting of the appliance

should follow the manufacturer’s instructions, and should

use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should

be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart

combination to overturn.

Do not use the appliance on a bed, sofa, rug or similar

surface that may block the ventilation openings. This

appliance should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided

or the manufacturer’s instructions have been adhered to.

5. Waterandmoisture – The appliance shall not be exposed to

drippingandsplashing-forexample,nearabathtub,washbowl,

kitchen sink, laundry tub, in a wet basement, or near a

swimmingpool,etc.Donotplaceanobjectcontainingliquid,

such as a flower vase, on the appliance.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

DV-705/DVF-R5070 (EN/K,P,E,Y)

13.Lightning– For added protection for this appliance during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the appliance due to lightning and power-line

surges.

18.Power lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

14.Abnormal smell – If an abnormal smell or smoke is

detected, immediately turn the power OFF and unplug the

appliance from the wall outlet. Contact your dealer or

19. AC outlets – Do not connect other audio equipment with

a power consumption larger than that specified to the AC

outlet on the rear panel. Never connect other electrical

appliances, such as an iron or toaster, to it to prevent fire

or electric shock.

nearest service center.

POWER OFF!

Preparations

15.Damage requiring service – The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the

appliance.

20. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by

followingtheinstructionmanual.Adjustonlythosecontrols

that are covered by the instruction manual as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the appliance to its normal operation.

E. The appliance has been dropped, or the enclosure

damaged.

21. Attachment – Do not use attachments not recommended

by the appliance manufacturer as they may cause hazards.

22. Replacementparts–Whenreplacementpartsarerequired,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original parts. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

F. Theapplianceexhibitsamarkedchangeinperformance.

16.Servicing – The user should not attempt to service the

appliance beyond that described in the instruction manual.

All other servicing should be referred to qualified service

personnel.

23. Safety check – Upon completion of any service or repairs

to this appliance, ask the service technician to perform

safety checks to determine that the appliance is in proper

operating condition.

17.Outdoor antenna grounding– If an outside antenna is

connected to the appliance, be sure the antenna system is

grounded so as to provide some protection against voltage

surges and built up static charges. Article 810 of the

National Electrical Code

ANSI/NFPA 70, provides

information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors,

locationofantennadischargeunit,connectiontogrounding

electrodes, and requirements for the grounding electrode.

See Figure.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

Notes:

GROUND CLAMP

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with

antenna terminals.

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

3. Item 17 complies with UL in the U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special features and Contents

DV-705/DVF-R5070 (EN/K,P,E,Y)

Special features

This document classifies the applications of each feature using the following marks.

: Description of a feature that can be used with DVD.

: Description of a feature that can be used with CD.

: Description of a feature that can be used with VCD.

DVD

VCD

Higher video quality than S-VHS video and LaserDisc

Higher audio quality than music CD

On screen Display (OSD)

MP3 and JPEG files playback

Caution : Read the pages marked

carefully to ensure safe operation.

Contents

Select Picture slide scale ................................................................... 24

Preparations

Introduction......................................................................................... 2

Before applying power .................................................................. 2

Safety precautions .......................................................................... 2

IMPORTANT SAFEGUARDS ...................................................... 4

Select Rating level ................................................................................ 25

Change Password ................................................................................. 25

Put back to the Defalt Setting............................................................. 26

DVD menu language list ...................................................................... 26

Operations

Special features and Contents........................................................ 6

Special features ...................................................................................... 6

Contents ..................................................................................................... 6

Discs information .............................................................................. 7

Types of playable discs ......................................................................... 7

Unplayable discs ..................................................................................... 7

Icons on the DVD VIDEO discs ............................................................. 7

Region Codes ...................................................................................... 8

Region codes in the world .................................................................... 8

Video formats...................................................................................... 9

Important items ................................................................................ 10

Maintenance .......................................................................................... 10

Reference ................................................................................................ 10

System Connections........................................................................ 11

Connecting to a TV with video (composite) input terminal ......... 11

Connecting to a TV with S-video input terminal ............................ 11

Connecting to a TV with SCART input terminal

Playback of disc .............................................................................. 27

Basic play ............................................................................................... 27

Disc playback features ........................................................................ 28

On screen display.................................................................................. 30

Various playback functions ........................................................... 31

Select Audio Language ........................................................................ 31

Select the Audio channel .................................................................... 31

Select Subtitle Language .................................................................... 31

Select Subtitle on or off ....................................................................... 31

Select Camera angle ........................................................................... 32

Random play ........................................................................................... 32

Repeat play ............................................................................................. 33

A-B Repeat play ..................................................................................... 33

Using Bookmarks .................................................................................. 34

Program play..................................................................................... 35

Menu playback................................................................................. 38

Hierarchical structure of VCD menus ............................................... 38

Playback without using the menu playback function

(For Europe and U.K.)........................................................................ 11

Connecting to a TV with Component input terminals

(For some areas)................................................................................ 12

Connecting to an Audio component .................................................. 12

Controls and indicators .................................................................. 13

Operation of remote control unit .................................................. 14

Set Up functions ............................................................................... 16

Select OSD Language ........................................................................... 19

Select Audio Language ........................................................................ 19

Select Subtitle Language .................................................................... 20

Select Menu Language ........................................................................ 20

Select Audio Output .............................................................................. 21

Select LPCM Output .............................................................................. 21

Select TV Screen ................................................................................... 22

Select progressive Mode (for U.S.A., Canada and U.S. Military) ..... 22

Select Video output (for Europe and Australia) .................................. 23

Select Color Scheme ............................................................................ 23

Set the Custom Color ........................................................................... 24

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ..................... 39

MP3 /JPEG media playback .......................................................... 40

Guidance of MP3/JPEG ........................................................................ 40

Playing back MP3/JPEG files ............................................................. 41

Selects the files to be played back directly.................................... 40

Rotating a picture (JPEG files only) .................................................. 42

MP3/JPEG Repeat play ....................................................................... 42

MP3/JPEG Random play ..................................................................... 43

ZOOM function (only for JPEG files) ................................................. 43

MP3/JPEG program playback ............................................................. 44

Knowledge

In case of difficulty.......................................................................... 45

Specifications .................................................................................. 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Discs information

DV-705/DVF-R5070 (EN/K,P,E,Y)

Types of playable discs

The system using this unit does not only play music from CD but can also play the discs listed below to offer you

high-quality entertainment of video of movies and live concerts.

Playable Disc

DVD VIDEO

CD (CD-R, CD-RW)

VCD (SVCD*)

Logo mark on disc

Disc size

Preparations

8cm

12cm

Played sides

One or both

One side only

Max. 20 min.

One side only

Approx. 41 min.

(1 side, 1 layer)

Approx. 75 min.

(1 side, 2 layers)

Approx. 82 min.

(2 sides, 1 layer)

Approx. 150 min.

(2 sides, 2 layers)

Approx. 133 min.

(1 side, 1 layer)

Approx. 242 min.

(1 side, 2 layers)

Approx. 266 min.

(2 sides, 1 layer)

Approx. 484 min.

(2 sides, 2 layers)

Max. 74 min.

Video + Audio

(In case of an SVCD, the possible play-

back time becomes shorter.)

Max. 20 min., digital Max. 80 min., digital

Audio

MP3 media and JPEG picture CD those can be played back with this equipment (CD-R, CD-RW)

‚

÷* This unit can play SVCDs, but some functions will not work.

÷ This unit can play DVD-R, DVD+R, DVD-RW, and DVD+RW discs, but depending on the recording unit, the disc

manufacturer, etc., playback sometimes may not be possible.

When a disc recorded in low-quality mode is played back, the picture may flicker or show other defects. In such a

case, record again in high-quality mode.

÷ThisunitmayalsobeincapableofplayingcertainCD-R/RWdiscsdependingontheirproperties,recordingconditions,etc.

Unplayable discs

This player cannot play back any of the following discs.

DVD AUDIO discs

VSD discs

DVD-ROM discs

CDV discs (Only the audio part can be reproduced.)

CD-G/CD-EG/CD-EXTRA discs (Only the audio can be

reproduced.)

DVD-RAM discs

SACD discs

CD-ROM discs (Except MP3 and JPEG discs [ ISO 9660

level 1] )

Photo CD discs (Never attempt to play them.)

÷ A DVD VIDEO disc with a region code which does not match this unit or without a region code. For details, see "Region

Codes".

÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video

Formats".

Icons on the DVD VIDEO discs

Icon

Description

Indicates the region code where the disc can be played.

Number of voice languages recorded with the audio function. The number in the icon indicates the number of

voice languages. (Max. 8 languages)

Numberofsubtitlelanguagesrecordedwiththesubtitlefunction. Thenumberintheiconindicatesthenumber

of subtitle languages. (Max. 32 languages)

Numberofanglesprovidedbytheanglefunction.Thenumberintheiconindicatesthenumberofangles.(Max.

9 angles)

Aspect ratios that can be selected. "4 : 3 LB" stands for Letter Box and "4 :3 PS" for Pan/Scan.

In the example on the left, the 16:9 video can be converted into letter box video.

Download from Www.Somanuals.com. All Manuals Search And Download.

Region Codes

DV-705/DVF-R5070 (EN/K,P,E,Y)

Every player of this model has a certain region code assigned to it based on the country where the player is used.

When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region

codes matching the region code of the player.

The region code for this player is described on the rear panel of the player.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the follow-

ing map.

Professional use disc

(Air Line cabin service)

Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player

shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below.

EvenwhenaDVDVIDEOdiscdoesnotcarryanyindicationoftheregioncode, itmaysometimesunabletobeplayed

on this player due to certain restrictions.

Restrictions due to difference between discs

SomeDVDandVCDdiscscanbeplayedonlyincertainplaybackmodesaccordingtotheinten-

Inhibition icon

tions of the software producers. As this player plays discs according to their intentions, some

functions may not work as intended by you. Please be sure to read the instructions provided

with each disc. When an inhibition icon is displayed on the TV screen connected to the player,

Invalid

it indicates that the disc being played is under the restriction as described above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video formats

DV-705/DVF-R5070 (EN/K,P,E,Y)

The TV picture display and disc signal systems can be

divided roughly into two TV formats (NTSC and PAL).

TV Format

NTSC

Major Countries & Areas

Japan, Taiwan, Korea, USA, Canada,

Mexico, Philippines, Chile, etc.

They are variable depending on countries and areas.

China, U.K., Germany, Australia, New

Zealand, Kuwait, Singapore, etc.

PAL

(For Europe )

ThisunithasafunctionforchangingthevideoformataccordingtotheTVtype. Theinitialsettingofthisunitfor"TV

Type" is PAL. Please confirm the type of your TV.

(For other countries)

Preparations

ThisunithasafunctionforchangingthevideoformataccordingtotheTVtype. Theinitialsettingofthisunitfor"TV

Type" is NTSC. Please confirm the type of your TV.

Checking the Video Format ("Preparation for Set Up" ^)

Check the video format of the TV to be useed

When the video formats are different :

Try playing the disc. If the video formats of the disc and TV

do not match, the played video may be black and white or

become as shown below.

Top and bottom edges are not

displayed.

Top and bottom areas are dark.

Picture turbulence due to sync

unmatching.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important items

DV-705/DVF-R5070 (EN/K,P,E,Y)

Maintenance

Maintenance of the unit

In regard to contact cleaner

Whenthefrontpanelorcasebecomesdirty,wipewithasoft, Do not use contact cleaners because it could cause a malfunction.

dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for

agents may cause discoloration.

they may deform the plastic component.

Reference

Disc handling precautions

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player. Therefore,

to avoid danger, never use a cracked or deformed disc or a disc repaired

with tape or adhesive agent. Please do not use discs which are not

round because they may cause malfunction.

Handling

Hold the disc so that you do not touch the

playing surface.

Label side

Playing side

Disc accessories

Sticker

The disc accessories (stabilizer, protection sheet, protection ring, etc.)

which are marketed for improving the sound quality or protecting discs

as well as the disc cleaner should not be used with this system because

they may cause malfunction.

Do not attach paper or tape to either the

playing side or the label side of the disc.

Sticky paste

Cleaning

If there are fingerprint marks or foreign matter

found on the disc, lightly wipe the disc with a

soft cotton cloth (or similar) from the center of

the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long pe-

riod of time, remove it from the player and

store it in its case.

Note related to transportation and movement

Before transporting or moving this unit, carry out the

following operations.

Caution on condensation

Condensation(ofdew)mayoccurinsidetheunitwhenthereisagreat

differenceintemperaturebetweenthisunitandtheoutside.Thisunit

maynotfunctionproperlyifcondensationoccurs. Inthiscase, leave

theunitforafewhoursandrestarttheoperationafterthecondensa-

tion has dried up.

1. Set the POWER ON/OFF switch to the ON

without loading a disc.

2. Wait a few seconds and verify that the display

shown appears.

Bespeciallycautiousagainstcondensationinthefollowingcircum-

stances:

When this unit is carried from one place to another across a large

difference in temperature, when the humidity in the room where

this unit is installed increases, etc.

3. Set the POWER ON/OFF switch to OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DV-705/DVF-R5070 (EN/K,P,E,Y)

Make connections as shown below.

When connecting the related system components, re-

fer also to the instruction manuals of the related com-

ponents.

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though

all connections have been made properly, reset the microcomputer

referring to "In case of difficulty". t

Caution:

Do not plug in the power lead until all connections are com-

pleted.

CAUTION

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

Do not place any objects impairing heat radiation onto the top of the unit.

Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.

Preparations

Top panel : 50 cm

Side panel : 10 cm

Back panel : 10 cm

Connecting to a TV with video (composite) input terminal

(For Europe)

(For other countries)

Audio video cord

Connecting to a TV with S-video input terminal

(For Europe )

(For other countries)

S-video cord

Audio cord

S-video cord

Audio cord

Connecting to a TV with SCART input terminal(For Europe )

SCART cable

DTS disclaimer clause

When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid pos-

sible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player

is connected to an amplification system.

To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to

the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DV-705/DVF-R5070 (EN/K,P,E,Y)

Connecting to a TV with Component input terminals (For some countries)

[ For U.S.A., Canada and U.S. Military]

Select the scanning method of the Component

Video output using the COMPONENT VIDEO OUT-

PUT switch on the rear panel.

INTERLACE: Scanning method is fixed at interlaced

scanning.

Component cords

Audio cord

PROGRESSIVE: When progressive scanning is un-

available with certain discs, the scanning method is

switched automatically to interlaced scanning.

When the scanning method is changed, the scan-

ning status will be displayed for a few seconds.

Please note that when PROGRESSIVE is

selected, only COMPONENT VIDEO

NNoottee

OUTPUT is available, while other video

output is not present.

Connecting to an Audio component

For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-

nection.

(For Europe)

AV receiver or

AV amplifier

Video cord or S-video cord

Audio cord

Coaxial or Optical cable

(For other countries)

AV receiver or

AV amplifier

Video cord, S-video cord or

Component cords

Audio cord

Coaxial or Optical cable

1. In case an associated system component is connected, also read the instruction manual of the component.

2. Insert the optical-fiber cable straight into the connector until it clicks.

3. Never bend or bundle the optical-fiber cable.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

DV-705/DVF-R5070 (EN/K,P,E,Y)

REPEAT indicators

REPEAT

REPEAT A-B

REPEAT 1

REPEAT DISC

TITLE indicator

CHAP(CHAPTER) indicator

TRACK indicator

DISC NUMBER indicators

PLAY/PAUSE indicator

HOUR indicator

MINUTE indicator

SECOND indicator

PROG.(PROGRAM) indicator

RANDOM indicator

Preparations

Character information

display section

DVD indicator

CD indicator

SEQ. MODE indicator

PBC (P.B.C.) indicator

VCD indicator

MP3 indicator

This lights when an MP3

or a JPEG disc is set.

Display

4 5

DISC SKIP

SEQ.MODE

POWER

-ON –OFF

1 POWER ON / OFF switch

2 Disc tray

3 Disc 1 ~ Disc 5 keys/indicators

4 DISC SKIP key

6 0(Open/Close) key

7 3(Play) key

8 8(Pause) key

9 7(Stop) key

0 4(PREV.), ¢(NEXT) (Skip) keys

•

5 SEQ. (SEQUENCE) MODE key

CAUTION

The power in this equipment will not be

completely cut off from the AC wall outlet

when the main switch is turned OFF.

DIMMER function

Thedisplaybrightnessofthemainunitcanbechanged.

Switching as shown below is done each time the DIMMER

key on the remote control is pressed.

DIMMER

1 Dim 1

2 Dim 2

3 Bright

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of remote control unit

DV-705/DVF-R5070 (EN/K,P,E,Y)

The keys on the remote control unit with the same names as on the main

unit have the same function as the keys on the main unit.

DISC

1 Numeric keys ()

2 CLEAR key

3 DISC SKIP key ¶ª

9 1key/¡key

(Search key)

•

ON SCREEN

TOP MENU

DISC

SEQ. MODE

4 (PREV.) key/¢

(NEXT) key (Skip key)•

4 SHIFT key

5 SUBTITLE key

⁄

AUDIO

ANGLE

0 REPEAT key

A-B Repeat key

! DIMMER key

@ MENU key

‹w

‹

DISC SKIP

SHIFT

CLEAR

ON/OFF

(SUBTITLE) ON/OFF key

SUBTITLE

⁄

(~∞

6 Cursor Up (5), Down (∞),

Left (2) and Right (3) keys

(~∞,ﬁﬂ

MULTI CONTROL

# ON SCREEN key

$ TOP MENU key

% AUDIO key

^ ANGLE key

& RETURN key

ENTER key

(~∞,›ﬁqr

* 7(Stop) key

6(Play/Pause) key ¶

⁄

P.MODE

RANDOM

RETURN

ENTER

7 P.MODE key

ﬁr

SLOW

STEP

RANDOM key

¤›e

¢∞

8 SLOW (Back slow/

Forward slow) keys

STEP (Back step/

Forward step) keys

•

REPEAT

A-B

DIMMER

Model : RC-D0308 (Infrared ray system)

Loading batteries

1 Remove the cover.

2 Insert batteries.

3 Close the cover.

÷ Insert two R6/LR6 (“AA”-size) batteries

following the polarity indications.

Operation

Remote sensor

Insert the power plug into a power outlet, press the

POWER ON/OFF switch of the main unit to ON, then

press the desired remote control key.

Operating range

(approx.)

÷ When pressing more than one remote control keys succes-

sively, press the keys securely by leaving an interval of 1 sec-

ond or more between pressing of keys.

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,

malfunction may occur. In such a case, change the installation position to avoid malfunction.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-705/DVF-R5070 (EN/K,P,E,Y)

Preparations

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Preparation for Set Up

1Set the POWER ON/OFF switch

2Set TV Format according to the connected TV type.

to the ON (

) position.

(Initial Settings 9)

With no disc inserted, keep the ANGLE

key on the remote control pressed and

presstheSTOPkeyonthemainunit.Each

time the STOP key is pressed, the setting

will be switched as follows.

POWER

MAIN UNIT

REMOTE

ANGLE

-ON –OFF

÷ After the power is switched ON, there is a

delay of about 3 seconds before the dis-

play is lit.

1 NTSC

2 MULTI (NTSC/PAL switchable)

3 PAL

Set up menu

The SETUP functions are the following diverse functions. Please change them according to your use environment.

Language Set up

OSD Language

This switches the language for the on-screen display.

( ENGLISH )

Audio Language*

Choose the language for the AUDIO output.

( ENGLISH )

Subtitle Language*

( ENGLISH )

Choose the language for SUB TITLE.

Menu Language*

( ENGLISH )

Choose the language for the menu recorded on the DISC.

* When "Original" is selected for items marked with an asterisk (*), automatic switching to the language initially

set for the disc will be done.

Please refer to Page 26 for the languages compatible with this model.

Audio Set up

Digital Output

This selects the format of the audio output from the DIGITAL OUT terminal.

BitStream

Choose this when connecting to an amplifier with built-in Dolby digital or DTS decoder.

When a DVD recorded with Dolby digital or DTS is played back, a bitstream signal will be put out.

When a disc recorded with linear PCM is played back, a linear PCM signal will be put out.

LPCM

Choose this for PCM output.

When a DVD recorded with Dolby digital is played back, output will be made converted to 2-channel

PCM.

And when a DVD recorded with DTS is played back, a bitstream signal will be put out.

LPCM Output

This selects the clock frequency for linear PCM output.

96kHz

In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should

control 96 kHz signal.

48kHz

Sets the linear PCM output to 48 kHz.

Even in case of 96 kHz digital signal, DVD will

How to use the RETURN key

deliver 48 kHz signal out.

When the RETURN key is

RETURN

The items in

are the initial set values.

pressed,thedisplayreturnsto

the previous screen (STOP

mode).

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Video Set up

TV Screen

This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.

4 : 3 LB

Choose this setting if you would prefer to see movies in their original aspect ratio. You will see the

entire frame of the movie, but it will occupy a smaller portion of the screen. This setting may result

in the movie appearing with black bars at the top and bottom of the screen.

4 : 3 PS

Choose this setting if you want the movie to fill the entire screen of your TV. You won't see part of

the picture (particularly the right and left edge).

Preparations

Some disc produced in a wide screen format can't be cropped in this fashion, which means the

black bars would appear at the top and the bottom of the screen.

16 : 9

Choose this setting if your DVD player is connected to a widescreen TV.

Progressive Mode (For U.S.A., Canada and U.S. Military)

The method for conversion of an interlaced signal to a progressive signal can be selected.

AUTO

Switching between WEAVE and BOB shown below is done automatically according to the video

contents of the disc.

WEAVE

This method combines two fields to convert them to one frame. This is effective for playback of

animations created on a computer etc.

BOB

This method interpolates the missing lines above and below a field for conversion to a single frame.

This is effective for images other than those for which the above WEAVE is recommended.

Video output (For Europe)

Choose "S-VIDEO" in case of connection to the S-VIDEO terminals on the rear, choose "RGB" in case of connection to

the AV terminal. Output will not be made to the not selected terminals (!) ( S-VIDEO )

Color Scheme

Color adjustment can be performed.

Standard

This is the standard setting.

Best

This mode is an experienced combination of contrast, color, luminance.

Soft

A soft coloring will be obtained.

Sharp

A sharp coloring will be obtained.

Customed

Chose this setting to use values set in detail for a custom color setting.

Custom Color

Fine setting of the color composition elements is possible.

Fine adjustment is possible for brightness, contrast, saturation, and sharpness.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

System Set up

Picture slide scale

The display scale at the time of playback of a JPEG file slide show can be selected.

Fixed

Use is made with fixed scale.

Automatic

Display is made with automatic size change to match the size of the TV screen.

Rating Level

This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.

However, even when a DVD disc is marked "Adult-oriented" or so on the label, its viewing cannot be

restricted unless the restriction level is recorded in the disc itself. ( 8 )

Parental lock level;

Level 8: All DVDs can be played back.(Factory preset)

Level 7 to 2: DVDs for general audiences/children can be played back. (DVDs for adults are prohibited.)

Level 1: DVDs for children can be played back. (DVDs for adults/general audiences are prohibited.)

Password input is required for setting or changing of the rating level.

(The password set at the time of shipping from the factory is "0000".)

Restore Setup Info

This resets all settings, except for PARENTAL and PASSWORD, to the factory defaults.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

Select OSD Language

SelectAudioLanguage

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Language" icon, then press

Cursor right (3) key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Language" icon, then press

Cursor right (3) key.

"Language" icon

Preparations

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the re-

mote to select "OSD Language", then press the

Cursor right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the re-

mote to select "Audio Language", then press

the Cursor right (3) key to access the sub fea-

tures

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the re-

mote to select specific language, then press the

ENTER key.

mote to select specific language, then press the

ENTER key.

MULTI CONTROL

ENTER

When "Original" is selected, automatic switch-

ing to the language initially set for the disc to

be played back will be done.

5 Press Cursor left (2) key on the remote to re-

turn to previous menu.

Please refer to Page 26 for the languages com-

patible with this model.

MULTI CONTROL

5 Press Cursor left (2) key on the remote to re-

turn to previous menu.

6 Press the MENU key to return to previous display.

MULTI CONTROL

6 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

SelectSubtitleLanguage

Select Menu Language

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Language" icon, then press

Cursor right (3) key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Language" icon, then press

Cursor right (3) key.

"Language" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select "Subtitle Language", then press the Cur-

sor right (3) key to access the sub features.

3 Press Cursor up/down (5/∞) keys on the remote

to select "Menu Language", then press the Cursor

right (3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the re-

mote to select specific language, then press the

ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific language, then press the EN-

TER key.

MULTI CONTROL

ENTER

When "Original" is selected, automatic switch-

ing to the language initially set for the disc to

be played back will be done.

Please refer to Page 26 for the languages com-

patible with this model.

When "Original" is selected, automatic switch-

ing to the language initially set for the disc to

be played back will be done.

Please refer to Page 26 for the languages com-

patible with this model.

5 Press Cursor left (2) key on the remote to return

to previous menu.

MULTI CONTROL

6 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

Select Audio Output

Select LPCM Output

48kH : Even in case of 96 kHz digital signal, DVD will

deliver 48 kHz signal out.

1 During stop mode, press MENU key on the re-

mote.

96kH : In case of 96 kHz digital signal, DVD will de-

liver 96 kHz signal out. In this case your re-

ceiver should control 96 kHz signal.

1 During stop mode, press MENU key on the re-

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Audio" icon, then press

Cursor right (3) key.

mote.

"Audio" icon

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Audio" icon, then press

Cursor right (3) key.

Preparations

MULTI CONTROL

"Audio" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select "Digital Output", then press the Cursor

right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select "LPCM Output", then press the Cursor

right (3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select specific output mode, then press the

ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific output mode, then press the

ENTER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

MULTI CONTROL

6 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to page 16 to 18 for setup.

Select TV Screen

Select progressive Mode

(for U.S.A., Canada and U.S. Military)

1 During stop mode, press MENU key on the re-

mote.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Video" icon, then press

Cursor right (3) key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Video" icon, then press

Cursor right (3) key.

"Video" icon

MULTI CONTROL

"Video" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select "TV Screen", then press the Cursor

right (3) key to access the sub features.

3 Press Cursor up/down (5/∞) keys on the remote

to select "Progressive Mode", then press the Cur-

sor right (3) key to access the sub features.

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select TV Screen type, then press the ENTER

to select specific mode, then press the ENTER

key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

MULTI CONTROL

6 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to page 16 to 18 for setup.

Select Video output

Select Color Scheme

(for Europe )

1 During stop mode, press MENU key on the re-

mote.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Video" icon, then press

Cursor right (3) key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Video" icon, then press

Cursor right (3) key.

Preparations

"Video" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select "Video output", then press the Cursor

right (3) key to access the sub features.

3 Press Cursor up/down (5/∞) keys on the remote

to select "Color Scheme", then press the Cursor

right (3) key to access the sub features.

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the re-

mote to select desired Color Scheme, then press

the ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific mode, then press the ENTER

key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

MULTI CONTROL

6 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

Set the Custom Color

Select Picture slide scale

Thecustomcolorcanbechangedonlywhen"Customed

" has been selected in "Color Scheme".

1 During stop mode, press MENU key on the re-

mote.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "System" icon, then press

the Cursor right (3) key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "Video" icon, then press

Cursor right (3) key.

"System" icon

MULTI CONTROL

"Video" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the re-

mote to select "Picture slide scale", then press

the Cursor right (3) key to access the sub fea-

tures.

3 Press Cursor up/down (5/∞) keys on the remote

to select "Custom Color", then press the ENTER

key to access the sub features

MULTI CONTROL

ENTER

4 Press Cursor up/down (5/∞) keys on the re-

mote to select "Fixed" or "Automatic", then

press the ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select "Brightness" (brightness).

MULTI CONTROL

ENTER

MULTI CONTROL

5 Press Cursor left (2) key on the remote to return

to previous menu.

5 Press Cursor left/right (2/3) keys on the remote

MULTI CONTROL

to control brightness.

6 Press Cursor up/down (5/∞) keys, select "Con-

trast", "Saturation", or "Sharpness", and adjust

each item in the same way as in step 5.

6 Press the MENU key to return to previous display.

7 Press the ENTER key or RETURN key on the re-

mote.

8 Press Cursor left (2) key on the remote to return

to previous menu.

9 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

Select Rating level

Change Password

1 During stop mode, press MENU key on the re-

This part of DVD rating lets you determine how your

playerwillreactdiscsthatcontainmoviesthatarerated

(in the U.S.A. the Motion Pictures Association of

America rates movies as G, PG, PG-13, etc.).

mote.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "System" icon, then press

the Cursor right (3) key.

"System" icon

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "System" icon, then press

the Cursor right (3) key.

MULTI CONTROL

Preparations

"System" icon

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select "Rating Level", then press the ENTER

key to access the sub features.

3 Press Cursor up/down (5/∞) keys on the remote

to select "Rating Level", then press the ENTER

key to access the sub features.

MULTI CONTROL

ENTER

MULTI CONTROL

4 Input 4 digit password by press numeric keys,

ENTER

then press the ENTER key.

The password set at the time of shipping from the

factory is "0000".

4 Input 4 digit password by press numeric keys,

5 Select "New Password", then press the ENTER

then press the ENTER key.

key.

The password set at the time of shipping from the

factory is "0000".

MULTI CONTROL

To change the password, follow the procedure

shown on page 25.

ENTER

Press the RETURN key on the remote control to

quit setup.

6 Press the numeric keys to enter new password

5 Select "Rating Level", then press the ENTER

(4 digit), then press the Cursor down (∞) key.

key.

MULTI CONTROL

7 Enter new password again, then press the EN-

6 Press Cursor up/down (5/∞) keys on the remote

to select specific level, then press the ENTER

key.

TER key on the remote.

8 Press RETURN key on the remote to return to

previous menu.

7 Press RETURN key on the remote to return to

previous menu.

9 Press the MENU key to return to previous display.

8 Press the MENU key to return to previous display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Please refer to pages 16 to 18 for setup.

Put back to the Default

Setting

DVD menu language list

OSD display

ENG

CHI

Language

1 During stop mode, press MENU key on the re-

mote.

English

Chinese

Danish

DNK

GER

SPA

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the "System" icon, then press

the Cursor right (3) key.

German

Spanish

French

"System" icon

MULTI CONTROL

FRE

HIN

Hindi

MULTI CONTROL

HUN

IDN

Hungarian

Indonesian

Italian

3 Press Cursor up/down (5/∞) keys on the remote

to select "Restore Setup Info", then press the

ENTER key.

ITA

JAP

Japan

KOR

MNG

MYS

POL

POR

ROM

RUS

SVK

Korea

MULTI CONTROL

Mongolian

Malay

ENTER

Polish

Portuguese

Romanian

Russian

Slovak

÷ This resets all settings, except for PARENTAL

and PASSWORD, to the factory defaults.

4 Press Cursor left (2) key on the remote to return

to previous menu.

MULTI CONTROL

SWE

THA

TUR

VNM

NOR

FIN

Swedish

Thailand

Turkish

5 Press the MENU key to return to previous display.

Vietnamese

Norweigian

Finnish

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of disc

Using the On-screen banner display

DV-705/DVF-R5070 (EN/K,P,E,Y)

Basic play

Preparation

DISC SKIP key

TOP MENU key

0(open/close) key

Disc tray

POWER

MAIN UNIT

DISC SKIP key

POWER ON/ OFF switch

-ON –OFF

8(Pause) key

÷ Set the POWER ON/OFF switch to the ON (

) position.

3(Play) key

÷ After the power is switched ON, there is a delay of about

7(Stop) key

3 seconds before the display is lit.

6(Play/Pause) key

Load a disc.

Label side

1 Open the tray.

MAIN UNIT

2 Place a disc.

3 To set a disc to a different disc tray, press the DISC

SKIP key to change the position of the disc tray.

MAIN UNIT

REMOTE

Operations

Start playback.

MAIN UNIT

TITLE No. (DVD)

REMOTE

CHAPTER No. (DVD)

Time display

TRACK No. (CD/VCD)

÷ When the 6 key is pressed while a tray is open, the

tray closes automatically, and then playback begins.

÷ To pause playback press the 8key on the main unit or press

the 6 key on the remote.

Do not push the disc tray directly to close it.

NNoottee

Alwayspressthe0keyonthemainunitorthe6

key on the remote control to close the disc tray.

When a menu screen is recorded on the

disc, the menu screen will be displayed

TOP MENU

when the TOP MENU key or MENU key

is pressed. At the menu screen, the

menu can be selected by pressing the

Cursor keys and ENTER key.

When a Disc Menu appears on the screen

In case of interactive DVDs, a Disc Menu appears on the

screen. Then press ENTER to select specific menu you

want to play by using Cursor keys.

To stop playback

RESUME playback (only for DVD)

MAIN UNIT

REMOTE

Whenthe7(Stop)keyhasbeenpressedonceduring

playback to stop the playback, and then playback is

startedagain,playwillstartfromthepointwherethe

playback had been stopped. This is called the RE-

SUME function. When the 7 (Stop) key is pressed

againduringstop,theRESUMEfunctioniscancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screePnlbaaynbnaecrkdoifsdpilsacy

DV-705/DVF-R5070 (EN/K,P,E,Y)

Disc playback features

STEP keys

NNootteess

SLOW keys

÷ You won't hear the sound (audio) on the DVD and VCD when

you're using the Skip, Search, Step or Slow motion features.

÷ Playback features are not available during the opening cred-

its of a movie.

4, ¢ (Skip) keys

6(Play/Pause) key

1, ¡

3(Play) key

(Search)

keys

CD DVD

VCD

Skipping chapters or tracks

÷ The chapter (or track) in the direction of the key pressed is

skipped, and the selected chapter (or track) will be played

from the beginning.

MAIN UNIT

REMOTE

÷ When the 4key is pressed once during playback, the chap-

ter (or track) being played will be played from the beginning.

4: To skip backward

¢: To skip forward

CD DVD

VCD

Searching

REMOTE

÷ During playback, press the 1 or ¡key.

÷ Each press switches the searching speed.

1 Fast Play / Fast Back Play

2 Scan Forward 1 / Scan Backward 1

3 Scan Forward 2 / Scan Backward 2

4 Scan Forward 3 / Scan Backward 3 (Only for DVD)

5 Scan Forward 4 / Scan Backward 4 (Only for DVD)

6 Play

1: To search backward

¡: To search forward

÷ Audio is not output during forward or reverse search. (VCD/

DVD)

÷ Press the 6key at any time to resume normal playback.

DVD

VCD

STEP (freeze frame and frame advance)

÷ During playback, press the STEP keys.

÷ Each time you press the keys, the picture advances one

frame.

÷ At the time of VCD playback, backward STEP is not possible.

÷ Press the 6key to resume normal playback.

REMOTE

STEP

DVD

VCD

Slow motion playback

÷ During playback, press the SLOW keys.

÷ Each press switches the motion speed.

REMOTE

1 Slow 1/16 (Back Slow 1/16) (Only for DVD)

2 Slow 1/8 (Back Slow 1/8)

SLOW

3 Slow 1/4 (Back Slow 1/4)

4 Slow 1/2 (Back Slow 1/2)

5 Play

(Back Play)

÷ Press the 6key to resume normal playback.

÷ At the time of VCD playback, Back Slow is not possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screePnlbaaynbnaecrkdoifsdpilsacy

DV-705/DVF-R5070 (EN/K,P,E,Y)

Playback from desired track or title

BecauseDVDVIDEOdiscsusedigitaltechnology,atitlecanbedividedintoindividualchapters(similartotracksonaCD).

÷ Select the desired track No. (CD, VCD) or title No. (DVD)

REMOTE

1 Press the numeric keys as shown below

(Example) To select track No. 23 : 23

2 Press the ENTER key.

÷ P.B.C. on mode of VCD, the Selecting a Track func-

NNootteess

tion may not work. ·

ENTER

DVD CD

VCD

Playing discs by changing them

MAIN UNIT

REMOTE

÷ Press DISC SKIP key to skip a disc.

÷ When the DISC SKIP key is pressed while the tray open, the

tray simply rotates.

DVD

VCD

Operations

Playing from the selected disc

MAIN UNIT

÷ Press one of the Disc 1 to Disc 5 key to select a disc.

÷ The disc number indicator above one of the Disc 1 to Disc 5

key on the main unit lights up and playback starts.

÷ At the time of operating on the remote, press the 1 to 5

(DISC) key within 3 seconds after pressing SHIFT key.

REMOTE

Press within 3 seconds after

pressing the SHIFT key.

If a disc is added or removed during playback or stop,

the disc indicator may show incorrect information on

discs. In this case, press the Disc 1 to Disc 5 keys so

that the unit loads the correct positioning of each disc

and judges its presence.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screePnlbaaynbnaecrkdoifsdpilsacy

DV-705/DVF-R5070 (EN/K,P,E,Y)

DVD

VCD

Switching sequential play mode

The player is capable of sequential playback using the 5 disc carousel disc changer. If a DVD and/or VCD is mixed

in the discs to be played sequentially, the sequential playback may stall in the middle while the menu remains

displayed. In such a case, switch the sequential play mode of the player.

MAIN UNIT

÷ Press SEQUENCE MODE key to select play mode.

At the time of operating on the remote, press the 6 (SEQ.MODE)

key within 3 seconds after pressing SHIFT key.

÷ Each press switches the sequential play mode.

1 Sequential play mode 1 (SEQ.1 )

2 Sequential play mode 2 (SEQ.2 )

Sequential play mode 1("SEQ.1" lit)

All discs can be played including DVD discs.

REMOTE

÷ When there is a P.B.C.-compatible VCD or a DVD on the tray,

Press within 3 seconds after

sequential playback may sometimes be interrupted and the

menu displayed. In this case, perform menu playback.

pressing the SHIFT key.

Sequential play mode 2("SEQ.2" lit)

Playback of DVD discs is skipped in order not to interrupt sequential

playback.

÷ With a P.B.C.-compatible VCD, playback is performed by

switching P.B.C. automatically to off.

÷ When there is a VCD on the tray, SEQ. 2 playback may some-

time be interrupted.

On screen display

Theelapsedtimeortheremainingtimeforthechapterorthe

track can be displayed on the monitor (TV) screen.

At the time of CD/VCD playback.

1 Track Time

Press the ON SCREEN key on the remote.

Each press the key switches the display.

Elapsed time of the track being played.

2 Track Remain Time

Remaining time of the track being played.

3 Disc Time*

At the time of DVD playback.

Elapsed time of the disc being played.

4 Disc Remain Time*

Remaining time of the disc being played.

5 Goes off

1 Title Time

Elapsed time of the title being played.

2 Title Remain Time

ON SCREEN

Remaining time of the title being played.

3 Chapter Time

Elapsed time of the chapter being played.

4 Chapter Remain Time

* Items marked with an asterisk (*) may not be

displayed for a VCD in P.B.C. ON mode.

Remaining time of the chapter being played.

5 Second banner display

Audio information, Subtitle display etc.

6 Goes off

÷ The time information is switched off when no opera-

tion is performed for about 10 seconds.

Audio information Time display

Repeat mode

Track No.

Disc No.

Time information

TITLE No.

Disc No.

Time display

Chapter No.

display

Time information

Second banner display

Audio language

information

Angle information

Audio mode

information

Subtitle information

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Select Audio Language

If the disc was created with different language tracks,

you can use the AUDIO KEY on the remote to tempo-

rarily change the DVD player’s Audio setting.

Select Subtitle Language

You can change the Subtitle language while you’re

watching a disc (but only if the disc was created

with subtitles).

During playback, press the AUDIO key on the

remote.

During playback, press the SUBTITLE key on the

remote.

AUDIO

SUBTITLE

Audio information

Subtitle information

The language is switched each time the AUDIO

key is pressed.

The language is switched each time the SUB-

TITLE key is pressed.

Operations

÷ The display is switched off when no operation is per-

formed for about 3 seconds.

1. The language feature only works if the disc was cre-

1. The subtitle feature only works if the disc was cre-

ated with multiple audio tracks.

ated with multiple subtitle tracks.

NNootteess

2. When you chose an audio language by the AUDIO

key, you only override the audio language setting in

the DVD Player's main menu (in the Language Pref-

erences menu within Setup menu) temporarily.

2. The subtitle menu of the disc appears in some discs.

Select the Audio channel

Select Subtitle on or off

When the SUBTITLE ON/OFF key is pressed, subtitles

will be displayed. Switching between display of sub-

titles and no display of subtitles is done each time the

key is pressed.

You can choose to play back only the right or the left

channelofaudiorecordedonthedisc, oryoucanselect

stereo playback.

During VCD playback, press AUDIO key on the

remote.

Press SUBTITLE ON/OFF key on the remote.

AUDIO

ON/OFF

Each press the key switches the mode.

1 Audio Left

2 Audio Right

3 Stereo

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Select Camera angle

Some disc contains multiple angles particular scene or

sequence. If the disc only has one angle, this feature

won’t work.

Random play

The tracks of the current disc are played in random

order.

1 During STOP mode, press the RANDOM key on

1 During playback, press the ANGLE key on the

the remote.

remote.

RANDOM

ANGLE

Lit

The Random Play display appears

Angle information

Display

Each time you press RANDOM key on the remote,

random play would be on and off.

2 Press the play pause (6) key to start random

playback.

÷ The display is switched off when no operation is per-

formed for about 3 seconds.

"MP3/JPEG Random play" e

2 Select the Camera angle with press the ANGLE

key.

To cancel random play

1 Press the stop (7) key to stop playback.

2 Press the RANDOM key to cancel random play-

back.

NNootteess

÷ In RANDOM mode, playback of the disc will be continued.

÷ When playing a DVD, the Random function may not work.

÷ P.B.C. on mode of VCD, the Random play function may not

work.

The display can be extinguished by pressing the

ON SCREEN key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Repeat play

A-B Repeat play

The A-B repeat function lets you mark a segment to re-

peat between the beginning "A" and the end "B" of the

segment you want to replay.

Desired title, chapter, track or disc can be played back

repeatedly.

At the time of DVD playback.

÷"Repeat Chapter" : Repeat the chapter that is playing.

÷"Repeat Title"

: Repeat the title that is playing.

1 Press the A-B key on the remote when you want

to choose a scene (sound) as the beginning

point.

At the time of CD/VCD playback.

÷"Repeat One" : Repeat the track that is playing.

÷"Repeat All" : Repeat the disc that is playing.

During playback, press the REPEAT key on the

remote.

A-B

Lit

REPEAT

Each press the key switches the REPEAT mode

Display

At the time of DVD playback.

1 "Repeat Chapter" : Display lit "REPEAT 1"

2 "Repeat Title"

: Display lit "REPEAT"

3 "Repeat Off"

2 Press the A-B key again to choose a scene

At the time of CD/VCD playback.

(sound) as the end point.

Operations

1 "Repeat One" : Display lit "REPEAT 1"

2 "Repeat Disc": Display lit "REPEAT DISC"

3 "Repeat Off"

A-B

The Repeat B (Repeat A-B) display appears

Lit

At the time of REPEAT mode

"REPEAT" is light.

Display

÷ To cancel repeat playback, press the REPEAT key and

select "Repeat Off".

÷ The display is switched off when no operation is per-

formed for about 7 seconds.

÷ To cancel A-B Repeat playback, press the A-B key.

÷ The display is switched off when no operation is per-

formed for about 7 seconds.

"MP3/JPEG Repeat play" w

NNoottee

P.B.C. on mode of VCD, the Repeat play function may not

work.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Using Bookmarks

The bookmark feature lets you mark a point on the disc

that you can go to quickly.

Create the bookmark

1 During playback, press the RANDOM key on the

remote.

RANDOM

2 Press Cursor left/right (2/3) keys on the re-

mote to select desired bookmark number.

3 When you reach the scene you want to mark,

press ENTER key.

ENTER

÷ Up to 6 bookmarks can be applied in the same way for

one disc.

Recalling a bookmarked scene

Delete a bookmark

1 During playback, press the RANDOM key on the

remote.

RANDOM

2 Press the Cursor left/right (2/3) keys on the re-

mote to select a bookmark number to be de-

leted.

mote to recalling a bookmark number.

3 Press the play/pause (6) key.

3 Press the CLEAR key on the remote.

CLEAR

÷ Depending on the disc, the Bookmark function may

To delete all bookmarks

not work.

NNoottee

÷ P.B.C. on mode of VCD, the Bookmark function does

Open the disc tray or turn power off.

not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD

Program play

Using the On-screen banner display

DV-705/DVF-R5070 (EN/K,P,E,Y)

You can listen to the desired tracks of discs in any desired order.

Program Edit

1 During stop mode, press the P.MODE key on

Program edit display appears.

the remote.

P.MODE

As the information for all set discs is read,

some time may be required until the pro-

gram screen is displayed.

NNoottee

2 After Program edit display appears, press Cur-

sor right (3) key.

MULTI CONTROL

"Add" icon

3 Press Cursor up/down (5/∞) keys to select

"Add" icon, then press ENTER key.

Operations

MULTI CONTROL

ENTER

For correction after programming, select a

different icon instead of the "Add" icon.

"Add" : Adds a track to the program.

"Insert" : Adds a track between programs. In

thiscase,insertionismadeabove(be-

fore) the selected program.

"Modify": Modifies the program.

"Delete" : Deletes the selected program.

"Clear" : Deletes all programs.

4 Press Cursor up/down (5/∞) keys to select

Disc No., then press ENTER key.

MULTI CONTROL

ENTER

Disc No.

Continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen baPnrnoegradmisplay

DV-705/DVF-R5070 (EN/K,P,E,Y)

5 Press Cursor up/down (5/∞) keys to select

track, then press ENTER key.

track No.

MULTI CONTROL

ENTER

6 You can select maximum 19 values by repeating

step 2 - 5.

7 Press the play/pause (6)key on the remote

or play (3) key on the main unit to start pro-

gram play.

Program playback will start from the

selected program.

Playback will stop when the end of the

program is reached.

÷ Program playback will start from the selected program.

÷ Playback will stop when the end of the program is

reached.

To stop program play

Press the stop (7) key.

÷When the STOP key is pressed, the player will

stop with the program contents stored.

÷Whentheplay/pause (6)key or play (3) key

is pressed, normal playback will start.

÷Torestartprogramplayback,presstheP.MODE

keytodisplaytheprogramscreenandthenpress

the play/pause (6)key or play (3) key.

Delete Program

Select "Delete" or "Clear" in step 2 of "Program

Edit".

Release Program play

In following case, Program play would be released.

1. When you open and close tray.

2. When you turn power off and on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-705/DVF-R5070 (EN/K,P,E,Y)

Operations

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu playback

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Hierarchical structure of VCD menus

When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more

details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that

the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selec-

tions on the menu screens.

Example for a hierarchical structure

First level (menu)

Second level (submenu)

Third level (scenes)

Advancing

Returning

When an item is selected on the menu screen with the

ENTER(Select)keyorthenumerickeys, advanceismadeto

the next lower menu level. When the advance destination

is the "scene" to be played, the contents will be played.

Each time the RETURN key is pressed, return is made to the

next higher menu.

÷ When several menus (scenes) can be selected in each

level, screen switching is possible with the keys ¢

(NEXT) and 4(PREV.).

Examples of operation keys and indications used during VCD playback

3 (Select)

Soft jacket indication

KENWOOD operation key

RETURN

ENTER

÷ Depending on the software, the jacket indication may differ from the above.

Download from Www.Somanuals.com. All Manuals Search And Download.

SMeteUnpufpulnacytbiaocnks

DV-705/DVF-R5070 (EN/K,P,E,Y)

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off)

During VCD playback and stop mode, press the –

ON/OFF key on the remote control unit.

÷ For the track numbers, refer to the disc jacket or other mate-

rial.

÷ P.B.C. off mode : Without using menu playback function.

P.B.C. off mode

Goes off

ON/OFF

To return to menu playback

Press the –ON/OFF key again.

P.B.C. on mode

Lit

Operations

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEG media playback

Set Up functions

DV-705/DVF-R5070 (EN/K,P,E,Y)

Guidance of MP3/JPEG

MP3/JPEG media that can be played back with this equipment

Usable media : CD-ROM, CD-R, CD-RW

Usable formats : ISO9660 level 1 (excluding expanded formats)

Files that can be played back : MP3 files and JPEG files

Creating media for playing back on this equipment

Compressing MP3

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow.

MP3 Files : 128kbps recommended (32kbps-320kbps)

÷ This unit is compatible with 32 kHz, 44.1 kHz(recommended) and 48 kHz sampling frequencies.

÷ This unit is compatible with ID3-TAG Ver. 1.

÷ DIGITAL output of MP3 data is done not as MP3 data, but as PCM data.

Naming folders and files

Single-byte characters between A and Z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be displayed.

Ensure that the "mp3" (MP3 files) or "jpg" (JPEG files) extension log is attached to all file names

÷ Never add the "mp3" extension log to any files other than MP3 files. If the "mp3" extension log is added to any files other

than MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers,

resulting in damage of adverse effects.

÷ Never add the "jpg" extension log to any files other than JPEG files. If the "jpg" extension log is added to any files other

than JPEG, the unit will not operate normally.

Confirming media and files

Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media.

Check to ensure that the saved file can be played back normally.

÷ It is not possible to confirm that files can be played back correctly while they are being saved onto the media.

When saving files onto media

Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session

has not be closed or finalized will not be played back correctly with this equipment.

÷ There are cases where the folder names and file names will not be displayed correctly depending on the software used to

save them.

÷ Do not store files or folders other than MP3 or JPEG on media to be played back with this equipment.

÷ It is recommended that ten or less sessions are stored when recording MP3 files onto a media.

÷ In case of a multisession disc, some time may be required until playback begins.

÷ There are cases where playback is not possible when MP3/JPEG files (CD-ROM) and music CD infomation (CD-DA) are

saved on the same media.

Example for a hierarchical structure

Example for the playback sequence

Playback is made in the order of 1 to - in the

following example.

Folder

File

NNoottee

Folder names and file names are displayed up to 8 characters. When folder names and file names are recorded with more than 8

characters, the names will be displayed in abbreviated form.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DV-705/DVF-R5070 (EN/K,P,E,Y)

Playing back MP3/JPEG files

÷ It is not possible to play back folders and files that exceed the maximum limitations of the media.

÷ A certain amount of time is required for the player to confirm the media on which MP3/JPEG files have been recorded

before playback will commence.

Playback

÷ When MP3/JPEG files are set, the SMART NAVI

1 Press Cursor up/down (5/∞) keys on the re-

screen is displayed.

mote, then press the ENTER key.

Folders and files

in the root folder

Root folder

Information arear

MULTI CONTROL

ENTER

The selected folder will be opened. Repeat in the

same way until the file to be played is displayed.

2 Select desired file, then press the ENTER key

or play/pause (6) key.

MULTI CONTROL

Function explanation display section

Selected file

Selected folder

Operations

Selecttoreturntothepre-

ceding hierarchical layer.

ENTER

In case of playback of JPEG files

÷When the Play/pause (6) key is pressed, switch-

ing to the next file will take place approx. every 5

seconds.WhentheSTOPkeyispressed,therespec-

tive file remains displayed. (Stop condition)

÷When the ENTER key is pressed, the respective file

remains displayed. (Stop condition)

÷The ZOOM function can be used at the time of stop

condition. (e)

÷For a disc with mixed MP3 and JPEG files, simulta-

neous playback of MP3 and JPEG files is possible

by selecting a JPEG file after MP3 playback. In this

case, the MP3 sound may be interrupted while the

JPEG file is being read when the JPEG file is large.

Random moving pictures will be dis-

played during play.

Skipping files

To stop playback

During playback, press the 4or ¢ key.

Press the 7(STOP) key.

MAIN UNIT

REMOTE

MAIN UNIT

REMOTE

4: To skip backward

¢: To skip forward

Skipping to outside the folder being played

back is not possible.

Fast forwarding and fast reversing is not possible

with MP3/JPEG files.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DV-705/DVF-R5070 (EN/K,P,E,Y)

Rotating a picture (JPEG files only)

It is possible to rotating a picture.

When a JPEG picture is larger than the screen and extends beyond the screen, this function is not effective. In such

a case, perform zoom-out for the picture before you rotate it. ("ZOOM function" e)

Switchingasshownbelowisdonewhenthecursorkeys

When JPEG file is being displayed (stopped play-

are pressed.

back), press the Cursor (2/3/5/∞) keys on the re-

3key : 90° rotation in clockwise direction

mote.

MULTI CONTROL

2key : 90° rotation in counterclockwise direction

5key : vertical mirror image

∞key : Horizontal mirror image

Display examples

Press 3key

Press 5key

Press 2key

Press ∞key

MP3/JPEG Repeat play

Desired folders or discs can be played back repeatedly.

÷ "Repeat One" : Repeat the file that is playing.

÷ "Repeat Dir" : Repeat the folder (directory) that is playing.

÷ "Repeat Disc" : Repeat the disc that is playing.

Repeat display

During playback, press the REPEAT key on the re-

mote.

At the time of REPEAT mode

"REPEAT" is light.

REPEAT

Display

Each press the key switches the REPEAT mode

1 "Repeat One"

2 "Repeat Dir"

3 "Repeat Disc"

4 "Repeat Off"

: Display lit "REPEAT 1"

: Display lit "REPEAT"

: Display lit "REPEAT DISC"

÷ To cancel repeat playback, press the REPEAT key and select

"Repeat Off".

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DV-705/DVF-R5070 (EN/K,P,E,Y)

MP3/JPEG Random play

The files of a folder are played in random order.

÷ "RANDOM ON" : The files of a folder being played will be

selected in random order for playback.

Random display

1 During STOP mode, press the RANDOM key on

the remote.

AtthetimeofRANDOMmode

"RANDOM" is light.

RANDOM

Display

Each time you press RANDOM key on the remote, ran-

dom play would be on and off.

÷ InRANDOMmode,playbackofthediscwillbecontinued.

÷ In case of Random play for a disc with mixed MP3 and

JPEGfiles, randomplaywillbeperformedonlyforMP3

files when the file selected first is an MP3 file and only

for JPEG files when the file selected first is a JPEG file.

2 Press the play pause (6) key to start random

playback.

To cancel random play

Operations

1 Press the stop (7) key to stop playback.

NNoottee

2 Press the RANDOM key to cancel random play-

Entry into Random mode is not possible during Repeat

mode. In that case, switch off Repeat mode and then

press the RANDOM key.

back.

RANDOM

ZOOM function (only for JPEG files)

When JPEG file is being displayed (stopped playback),

the screen display size can be changed in five steps.

PresstheSTEP keysduringstoppedplaybackofJPEG

file.

STEP

The display size changes each time a key is pressed,

The display changes in 5 steps for zooming in and out.

When the zoomed picture is larger than the display

screen,thecursor(2/3/5/∞)keyscanbeusedtomove

the picture so that the parts outside the screen can be

displayed.

MULTI CONTROL

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DV-705/DVF-R5070 (EN/K,P,E,Y)

MP3 program playback

You can listen to the desired files of the current MP3 disc in any desired order.

It is not possible to program playback of JPEG files.

Program play for MP3 files can be per-

formedwiththesameoperationasformu-

sic CDs and VCDs.

ﬁ

Program Edit

Program edit display appears.

1 Press the P.MODE key on the remote.

P.MODE

"Add"

icon

As the information for all set discs is read, some

time may be required until the program screen is

displayed.

2 Press Cursor right (3) key.

"Add"

: Adds a track to the program.

"Insert" : Adds a track between programs. In

thiscase,insertionismadeabove(be-

fore) the selected program.

MULTI CONTROL

"Modify" : Modifies the program.

"Delete" : Deletes the selected program.

"Clear" : Deletes all programs.

3 Press Cursor up/down (5/∞) keys to select

"Add" icon, then press ENTER key.

MULTI CONTROL

ENTER

For correction after programming, select a

different icon instead of the "Add" icon.

4 Press Cursor up/down (5/∞) keys to select

Disc No., then press ENTER key.

MULTI CONTROL

ENTER

Disc No.

5 Press Cursor up/down (5/∞) keys to select

track, then press ENTER key.

MULTI CONTROL

ENTER

6 You can select maximum 19 values by repeating

step 2 - 5.

÷Program playback will start from the selected pro-

gram.

7 Press the play/pause (6)key on the remote

or play (3) key on the main unit to start pro-

gram play.

÷Playback will stop when the end of the program is

reached.

To stop program play, press the stop (7) key.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DV-705/DVF-R5070 (EN/K,P,E,Y)

What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the

table below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

1 During stop mode, press the MENU key on the remote to

The microprocessor may fall into malfunction (impos-

sibility to operate erroneous display, etc.) when the

power cord is unplugged while power is ON or due to

an external factor.

enter "Control Panel" menu.

Select the "System" icon, then press the Cursor right (3) key.

3 Select "Restore Setup Info".

4 Press the numeric keys as shown below.

Press 1, 3, 9, 7, then press the ENTER key.

In this case, switch off the power, wait for several sec-

onds, and then switch the power on again.

Returntothefactorydefaultsbyresettingthemicropro-

cessor is done as shown as follows.

When resetting is done according to this method, all set-

tings, including the settings for password and parental level,

will be reset to the factory defaults.

DVD player unit

Symptom

Cause

Remedy

There is no disc in the player.

There are no signals recorded on the side of

the disc being played.

Load a disc and press the 6key.

Turn the disc over and properly place it on

the disc tray.

Playback does not start when the 6key is

pressed.

The TV is not turned on.

The connection cords are not properly con-

nected.

Turn on the TV.

Properly reconnect the connection cords.

Playbackstartsbutnoimage/soundisseen/

heard.

The picture is slightly disrupted during fast

forward and fast reverse operations.

This is not a malfunction.

The picture is disrupted when the image is

fast forwarded or fast reversed.

The audio output cords are not properly con-

nected.

The volume control of the TV or amplifier is

not adjusted properly.

Properly connect the audio cords.

No sound is heard.

Set the sound volume to an appropriate

level.

Press the 6 key to resume normal play-

back mode.

The player is in a special playback mode.

A nearby device is generating noise.

The disc is dirty.

Separate this unit as far as possible from

the device you think is generating the

noise.

Refer to the "Disc handling precautions"

section and wipe dirt from the disc. 0

Use a new disc.

The picture does not look good or the pic-

ture/sound quality is poor.

The disc is damaged.

There is condensation on the optical lens.

Refer to the "Caution on condensation" sec-

tion and evaporate the condensation.

Time is required for the unit to detect the

disc type and size and for the rotation of the

motor to stabilize. This is not a malfunction.

Approximately 10 to 20 seconds are re-

quired for a disc to start playing, although

the time differs depending on the disc.

It takes a while for the disc to start playing.

The tray opens automatically.

Knowledge

The disc is not placed horizontally.

Properly place the disc on the tray.

The video format of the disc being played

does not match that of the connected TV

monitor.

Refer to the "Video formats" section ,and

use a disc with the appropriate video for-

mat for your TV or a TV with the appropriate

The top and bottom of the screen cannot be

seen.

video format for the disc.

The DVD disc being played does not contain

the recording of subtitles.

The subtitle cannot be displayed when the

DVD disc being played does not contain

the recording of subtitles.

The subtitle is not displayed.

The subtitle mode is set to off.

Press the SUBTITLE ON/OFF key to

switch on the subtitle mode.

⁄

The DVD disc being played does not contain

the recording of more than one audio (or sub-

title) language.

The voice (or subtitle) language cannot be

changed when the DVD disc being played

does not contain the recording of more

than one voice (or subtitle) language.

The voice (or subtitle) language cannot be

changed.

The DVD disc being played does not contain

the recording of more than one angle.

The viewing angle cannot be changed

when the DVD disc being played does not

contain the recording of more than one

angle.

More than one viewing angle may be re-

corded only in limited sections in a disc.

The viewing angle cannot be changed.

You are attempting to switch the angle in a

DVD section where more than one angle is

not recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DV-705/DVF-R5070 (EN/K,P,E,Y)

DVD player unit

Symptom

Cause

Remedy

A viewing restriction (PARENTAL) has been

set for the disc.

Check the viewing restriction level (PA-

RENTAL) setting.

Playback will not start even after a title is se-

lected.

You have forgotten the password.

Set the initial setup to the factory setup

with the following procedure.

The parental level cannot be changed.

During stop mode, press the MENU key

on the remote to enter "Control Panel"

menu.

Select the "System" icon, then press the Cur-

sor right (3) key.

Select "Restore Setup Info".

Press the numeric keys as shown below.

Press 1, 3, 9, 7, then press the

ENTER key.

The DVD disc being played does not contain

the recording of the selected voice or subtitle

language.

Use a DVD disc containing the recording of

the selected voice or subtitle language.

Thevoiceorsubtitlelanguageselectedinthe

initial setting is not played.

The function for displaying message on the TV

screen (On-Screen Messages) is set to off.

Set On-Screen Messages to on.

No message appears on the TV screen after

a key is pressed.

The menu language function (MENU) is not

set.

Set the disc menu language function

(MENU) as required.

Menu screen messages are not shown in the

desired language.

DVD disc cannot be played when the se-

quential mode of the player is set to "SEQ.2".

Switch it to "SEQ.1".

DVD disc cannot be played.

Menu playback is not available when P.B.C.

is Off or the sequential play mode of the

player is set to "SEQ.2".

Switch it to P.B.C. On or "SEQ.1".

P.B.C.-compatibleVCDcannotbeplayedwith

menu playback.

º·

Remote control unit

Symptom

Cause

Remedy

Remote control operation is not possible.

Batteries are exhausted.

Replace with new batteries.

Operate the unit inside the remote control-

lable range.

The remote control is too far away from the

system, the controlling angle is deviated or

there is an obstacle in between.

Inhibition icon

Symptom

Cause

Remedy

Playback is restricted intentionally by the

software producer.

The operation is inhibited. Please try an-

other operation.

The inhibition icon is displayed

and remote control is not pos-

sible.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,

4,819,098and4,907,093licensedforlimitedviewingusesonly.

Manufactured under license from Dolby Laboratories.

"Dolby"andthedouble-DsymbolaretrademarksofDolby

Laboratories.

This product incorporates copyright protection technology

thatisprotectedbymethodclaimsofcertainU.S.patentsand

otherintellectualpropertyrightsownedbyMacrovisionCor-

poration and other rights owners. Use of this copyright pro-

tection technology must be authorized by Macrovision Cor-

poration,andisintendedforhomeandotherlimitedviewing

uses only unless otherwise authorized by Macrovision Cor-

poration. Reverse engineering or disassembly is prohibited.

"DTS"and"DTSDigitalOut"aretrade-

marksofDigitalTheaterSystems, Inc.

[ For U.S.A. and Canada ]

Consumers should note that not all high definition televi-

sion sets are fully compatible with this product and may

causeartifactstobedisplayedinthepicture. Incaseof525

progressivescanpictureproblems,itisrecommendedthat

the user switch the connection to the "STANDARD DEFI-

NITION"output.IftherearequestionsregardingourTVset

compatibility with this model 525p DVD player, please

contact our customer service center.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DV-705/DVF-R5070 (EN/K,P,E,Y)

[Type]

[Video Section]

System ................................................... DVD video player

Signal read system ......................... Semiconductor laser

Wave length................................ For DVD; 640 to 660 nm

For CD; 770 to 810 nm

Video output format ......................................... NTSC/PAL

Video compression

DVD ................................................................... MPEG-2

Composite video output level

Power class ..................................................... Class 2 (IEC)

......................... 1 Vp-p (75 N load, sync. negative)

S-video output level

[D/A Conversion Section]

(Y-signal) .............. 1 Vp-p (75 N load, sync. negative)

(C-signal)

NTSC ........................................... 0.286 Vp-p (75 N)

PAL .............................................. 0.300 Vp-p (75 N)

Component Video output level (For U.S.A., CANADA

and U.S. Military)

D/A conversion ........................................................ 24 Bit

Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz)

......................... 4 fs (Sampling frequency; 96 kHz)

[Audio section]

Frequency response

(Y-signal) ................................................. 1 Vp-p (75 N)

(Cb-signal) ........................................ 0.648 Vp-p (75 N)

(Cr-signal) ......................................... 0.648 Vp-p (75 N)

RGB output level (SCART) (For Europe) .... 0.7 Vp-p (75 N)

Horizontal resolution........................ More than 480 lines

Video signal to noise ratio.................... More than 70 dB

Sampling frequency ; 44.1 kHz ............ 4 Hz ~ 20 kHz

Sampling frequency ; 48 kHz ............... 4 Hz ~ 22 kHz

Sampling frequency ; 96 kHz ............... 4 Hz ~ 38 kHz

Signal to noise ratio .............................. More than 98 dB

Dynamic range ....................................... More than 92 dB

Total harmonic distortion ...... Less than 0.008 % (1 kHz)

Channel separation ................... More than 90 dB (1 kHz)

Wow and flutter ........................ Below measurable limit

Analog output level/impedance .................... 2 V / 510 N

Digital output level/impedance

[General]

Power consumption .................................................. 16 W

Dimensions .................................. W : 440 mm (17-5/16”)

....................................................... H : 88 mm (3-7/16”)

....................................................... D : 388 mm (15-1/4”)

Weight (net)............................................... 5.3 kg (11.7 lb)

COAXIAL.............................................. 0.5 Vp-p / 75 N

OPTICAL ..... -21 dBm ~ -15 dBm (Wave length 660 nm)

KENWOODfollowsapolicyofcontinuousadvancementsindevelopment.Forthisreasonspecificationsmay

be changed without notice.

NNootteess

÷ Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).

Knowledge

Download from Www.Somanuals.com. All Manuals Search And Download.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below. Refer

to the model and serial numbers whenever you call upon your dealer for

information or service on this product.

Model

Serial Number

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia Tablet NS 15AT10 User Manual
Integra Speaker System MZA 47 User Manual
iOptron Telescope 9501 User Manual
Jet Tools Air Cleaner AFS 400 User Manual
John Deere Compact Loader 1050J User Manual
JVC DVD Player DR M100S User Manual
JVC Universal Remote KD G401 User Manual
Kenmore Range 73511 User Manual
Kenmore Range 79046268 User Manual
Keys Fitness Treadmill Alliance 855 User Manual