( )
( )
TS-570D G TS-570S G
HF Transceiver HF+6m Transceiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Digital Technology for Everyone
K
enwood has brought the best of HF
DSP technology out of the clouds and into the hands of everyone with the new
TS-570D(G) and TS-570S(G) (HF+6m). The G series represents the latest
advancements in HF radio design from Kenwood, and is even available as an
upgrade to pre-existing TS-570 units.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Operator -Oriented Engineering Provides You
with the Highest Levels of Performance.
TX Audio Shaping
Scanning
You have 3 ways of tailoring your transmit
audio with DSP: Voice Equalizer, Transmit
Equalizer and Speech Processor functions, plus
you can use the new 9-step TX sound quality
monitor volume for precision control. On SSB
and AM you can choose between 2 types of
Voice Equalizer transmit frequency response set-
tings according to your microphone and operat-
ing requirements. The Transmit Equalizer offers
4 frequency response settings on SSB, FM and
AM: high boost for improved clarity, bass boost
for stronger sound, formant pass to minimize
extraneous sounds, and conventional mode for
an ‘analog’ sound. The Speech Processor works
across three bands (SSB, FM and AM) for high
compression and minimal distortion. By com-
bining the Speech Processor gain settings with
the Transmit Equalizer, you are able to shape
your voice for virtually any application, plus it is
now available for RX as well, complete with its
own independent settings.
The TS-570D/S(G) has a wealth of scanning
capabilities including variable speed with time-
based or carrier-based resume modes, channel
scan, group channel scan, all except locked out
channels, or it can be programmed to scan a fre-
quency range between two channels. The scan-
hold function stops the scanning for 5 seconds.
provide a positive tactile
feedback, frequencies
can be directly entered
on the 10-key pad, and radio controls can be
customized by assigning specific menus, features,
or panel switches to the Programmable Function
(PF) key. And of course, Kenwood’s Fine mode
allows 1 Hz steps on the VFO dial for precise
manual tuning.
Large LCD
The amber-colored backlight LCD frequency
display is large, with a 4-stage dimmer, and is
laid out in a clear and informative manner. The
7-digit alphanumeric sub-display provides menu
Extensive Memory Functions
You have a bank of 100 memories
available, with 90 assignable for
standard memories and
10 for programmable
VFO,
mode guidance, split frequency display and
digital filter selection options. The accompany-
ing analog meter provides S-readings, PWR,
COMP, SWR and ALC information.
CW Auto Tune — a World first
Now you no longer have to adjust the VFO
while operating on CW — the CW
Auto Tune function does it for
you automatically by adjusting
the VFO to your preset pitch at
the touch of a button. In the
new G
Optimal Sizing
The 10-5/8 X 3-3/4 inch panel size make
the TS-570D/S(G) suitable for any
mobile operation, yet its large
display and sophisticated user
features make it a perfect candidate
to build a first-class base station
with. This versatility means that
you only need one radio for
all your home and field
models
the CW
auto tune mode
links only with the
RIT frequency
without changing the
operations.
transmit frequency so
incoming traffic can be tracked even if
it is slightly off frequency.
High Performance
Transmitter Section
Operator-Engineered Features
The TS-570D/S(G) represents the latest
advancements in the human-machine interface
as applied to radio transceiver design. Kenwood
engineers have achieved a fine balance between
size, features, display, controls and performance
to deliver a transceiver that will give you out-
standing results regardless of your operating
style or location.
The heavy-duty transmitter makes the
TS-570D/S(G) ideal for contesting, mobiling
and FSK applications, delivering between 5 and
100 watts in 5 watt increments. The large
heatsink and high-capacity cooling fan system
designed specifically for this model enables
continuous operation under a wide range of
environmental conditions.
programmable
scan and long-
term memory
functions. The scroll function lets you browse
memory contents, memory channel copy sends
the contents of one channel to another, lock-out
memory changes the scan map to exclude certain
channels, and memory shift alters the frequency
stored in a channel. In addition, there are 5
‘quick’ memories to capture a current operation
‘on-the-fly’, available in SSB, CW, FM, AM and
FSK modes — ideal for contest operation.
High frequency stability is achieved with a
one-point frequency control system that uses a
single crystal to control all internal oscillating
frequencies (except in FM mode). Stability can
even be raised to a pro-grade +/- 0.5 PPM
(within 7 Hz on the 14 MHz band) with the
optional SO-2 TCXO.
New Menu and User Features
There are 46 types of menu features to assist
both the novice and expert operator. The On-
line Guide feature provides information on a
scrolling sub-display so you won’t need to refer
to the manual, the click encoder and entry keys
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The Feature Packed TS-570D(G)/TS-570S(G) is
the Perfect Choice for Any and All Requirements.
Built-in Keyer
Other Features
Hot Receiver Section
The wide-band receiver covers from 500 kHz
through 30 MHz continuously with high selec-
tivity and sensitivity. The two built-in pre-amps
The full-featured electronic keyer provides solid
and reliable keying at any speed with dual key
inputs on the back — one for a paddle and one
for a key. You can choose between the new
Manual Weight feature where the relative length
of dots and dashes can be altered in 16 steps
between 1:2.5 and 1:4.0, or two types of Auto-
Weight — one that adjusts to the keying speed
automatically and one that works on a fixed
weight percentage. The Weight Reverse function
lessens the weight as the keying speed increases,
allowing for easier switching between keying
hands. And during CW message playback, the
paddle input can be prioritized with the Insert
Keying Settings function.
Automatic Antenna Tuner
The built-in Automatic Antenna Tuner is preset for
immediate matching at 18 points between the 1.8
and 28 MHz Amateur bands. And dual antenna con-
nectors on the TS-570D(G) are an added conve-
nience. (The TS-570S(G) has one connector each for
HF and 6m.)
7MHz–band RF Band Pass Filter Response
REF -29.3 dBm ATT 10 dB
5 dB/
VS-3
CENTER
7.0 MHz
The VS-3 option provides a synthesized voice out-
put to aid visually-impaired operators or as an
added measure of convenience and safety for
mobile operators.
PREVIOUS
MODELS
RBW
3.0 kHz
VBW
TS-570D/S(G)
1.0 kHz
PC Control Option
You can integrate your TS-570 Series with a PC
via a 9-pin D-SUB and RS-232C interface. The
RCP-2 Radio Control Program also allows the HF
operator to set-up and program multiple radios,
and save the configuration data to disk.
SWP 10 s
SPAN 14.0 MHz
CENTER 7.0 MHz
(one each for high band and low band) allow
you to select better sensitivity or higher IMD
performance, and the dedicated 7 MHz and
14 MHz bandpass filters deliver improved SW
intermodulation rejection.
During split-frequency operations you can
receive your transmit frequency with a touch of
the TF-Set button. The transmit frequency can
be changed, even if the receive frequency is
locked, as long as the button is held.
Packet & FSK
The packet filter bandwidth and AF input/out-
put levels are fully selectable. You can adjust the
ACC2 (PKD) input/output and ANO output
levels.
FSK features include selectable shift frequen-
cies between 170, 200, 425 and 850 Hz. The
KEY polarity and Hi/Low tones are switchable
to match your RTTY device (TU, MCP). The
FSK reverse function lets you match transmis-
sion methods to the other party if necessary, for
example changing the BFO frequency from LSB
(normal) to USB (reverse).
DRU-3A
The DRU-3A Digital Recording Unit is an avail-
able option that enhances contesting or general
operation.
Data Transfer
Memory settings can be transferred between radios
using the copy mode.
VOX Circuit
Other receiver section features include IF
Shift, Noise Blanker to eliminate pulse type
noise, AGC, All-Mode Squelch and RF Gain.
In SSB, FM and AM modes the transmitter can be
activated by voice, with a fully selectable delay time
and gain.
Linear Amplifier Control
An external Linear Amplifier can be controlled via
the menu and the remote jack control relay.
CW Features
FM Features (Built-in)
In addition to the CW Auto Tune function, the
TS-570D/S(G) has a host of CW features often
found only on larger-class models. The full/semi
break-in switching and delay time settings are
fully adjustable. In semi break-in the delay time
between key release and active receive mode can
be set for between 50 milli-seconds and 1000
milli-seconds. When using VOX operation the
delay time can be set for between 150 milli-
seconds and 3000 milli-seconds. Other features
include CW side tone monitor and volume
setting, CW reverse mode and a 3 channel
CW message memory.
The TS-570D/S(G) has built-in CTCSS
functionality with 38 sub-tones settings plus
a 1750 Hz tone and switchable Narrow/Wide
deviation modes. The sub-tone can be
set for burst or continuous, depending
on the input requirements of the target
repeater system, and can be assigned to
any of the first 90 memory channels.
FM is not necessarily included in all
models.
Advanced Technology Upgrade is available in new production models and for
pre-existing TS-570D/S; contact your dealer for details.
Download free RCP-2 control software from the Internet!
INTERNET http://www.kenwood.net
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Kenwood Sky Command System
Innovative concept allows the HF operator freedom to walk and talk
with handheld remote control
The Kenwood Sky Command System (KSS) effectively puts an HF trans-
ceiver in your hand, allowing you to relax in your lounge or backyard while
Kenwood Sky Command
Employing a pair of TH-79AKSS transceivers as Commander and Transporter,
controlling the TS-570D/S(G) in your shack. Or you could be sitting at a
the Kenwood Sky Command system has proved extremely effective in freeing
baseball game while operating the HF transceiver safely installed in your car.
the HF operator from his shack. The DTMF keys enable simple pushbutton
And the new Sky Command II adds the convenience of LCD confirmation
operation of all major parameters on the TS-570D/S(G). And if the optional
of HF frequency.
VS-3 voice unit is added, you can enjoy audible confirmation of the frequency
setting. You can thus hunt DX while working around the house or garden.
It’s not just freedom you’ll enjoy: KSS is simple and intuitive, yet amaz-
ingly powerful. Once the Transporter (TH-79AKSS or TH-D7A)* has been
wired to your TS-570D/S(G) HF transceiver, all you need to carry is the
Kenwood Sky Command II
Sky Command II enables full-duplex operation, adding some extra features
second handheld (the Commander). The Commander transmits control
that further enhance functionality. For example, you can confirm HF
signals to the Transporter, which also relays your voice to the HF radio. In
frequency visually on the LCD panel of the Commander (TH-D7A).
return, HF signals are transmitted back to the Commander. This system
Control is effected via TNC (AX.25), and now even more HF functions are
allows you to transmit and receive HF signals, set frequencies, switch
accessible: XIT, mode switching (USB, FM, etc.), split-frequency operations
on/off, memory shift, and frequency step selection. In addition, once every
memory channels, and much more — all from your handheld transceiver.
10 minutes, the Transporter (TH-D7A) will send out its pre-programmed
call sign via CW.
* Sky Command requires two TH-79AKSS units,
while Sky Command II uses a pair of TH-D7A transceivers.
Kenwood Sky Command : TH-79AKSS
Voice signals
Control signals
440MHz band
144MHz band
HF Antenna
COM
connector
MIC
HF receive audio +
Voice confirmation of
HF frequency
ø3.5 EXT SP
Transporter (TRP)
TH-79AKSS
440MHz/144MHz
PG-4R
Sky Command
Adapter
HF Transceiver
TS-570D/S(G)
Commander (CMD)
TH-79AKSS
440MHz/144MHz (2M)
• The operator controls the TS-570D/S(G) HF transceiver from the portable Commander
(CMD) TH-79AKSS.
• The received HF signal is re-transmitted by the Transporter (TRP) TH-79AKSS
on the 2M band.
• Voice is transmitted from the CMD unit on the 440MHz band.
• Control signals are also sent from the CMD unit on the 440MHz band.
• With an optional voice unit (VS-3) installed in the TS-570D/S(G) HF transceiver,
the operator can confirm the HF frequency.
Kenwood Sky Command II : TH-D7A
Voice signals
440MHz band
Control signals
HF Antenna
Confirmation of
HF frequency
COM
440MHz band
connector
MIC
ø3.5 EXT SP
Transporter (TRP)
TH-D7A
440MHz/144MHz
PG-4R
Sky Command
Adapter
HF Transceiver
TS-570D/S(G)
HF receive audio
144MHz band
Commander (CMD)
TH-D7A
440MHz/144MHz (2M)
• The operator controls the TS-570D/S(G) HF transceiver from the portable Commander
(CMD) TH-D7A.
• Voice is transmitted from the CMD unit on the 440MHz band.
• Control signals are sent from the CMD unit on the 440MHz band.
• The received HF signal is re-transmitted by the Transporter (TRP) TH-D7A on the 2M band.
• The operator can confirm the HF frequency on the LCD of the CMD.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL ACCESSORIES
VS-3
DRU-3A
HS-5
HS-6
LF-30A
Voice Synthesizer Unit
Digital Recording Unit
Deluxe Headphones (8 Ω)
Small Headphones (12.5 Ω)
Low-Pass Filter
MB-430
MC-43S
MC-90
DSP-Compatible Desktop
Microphone
MC-80
MC-60A
Mobile Bracket
Hand Microphone
Desktop Microphone
Deluxe Desktop Microphone
PC-1A
PG-4R
PG-2Z
PS-53
Heavy-Duty Power Supply
(22.5 A)
PS-40
Phone Patch Controller
Sky Command Adapter
DC Power Cable
DC Switching Power Supply
(Available only where phone patch operation is legal)
IF-232C
SO-2
TCXO (Temperature-
compensated Crystal Oscillator) Unit
SP-23
SP-50B
SP-41
Interface Unit
External Speaker
Mobile Speaker
Mobile Speaker
YK-88C-1*
8.83 MHz CW Filter
(500 Hz bandwidth)
YK-88SN-1*
8.83 MHz SSB Narrow Filter
(1.8 kHz bandwidth)
MA-5
YK-88CN-1*
8.83 MHz CW Narrow Filter
(270 Hz bandwidth)
SW-2100
SWR/Power Meter
(1.8~30 MHz)
5-Band Mobile Antenna
* One of 3 optional IF filters can be selected for installation.
Not all products are available in all markets.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
RECEIVER
TS-570D(G)/TS-570S(G)
Circuitry
GENERAL
SSB/CW/AM/FSK
Double Superheterodyne
Triple Superheterodyne
160, 80, 40, 30, 20, 17, 15, 12, 10,
6 [TS-570S(G) only] meter bands
Transmitter Frequency Range
FM
Intermediate Frequency
Receiver Frequency Range
Mode
500 kHz ~ 30 MHz, 50 MHz ~ 54 MHz
A1A (CW), J3E (SSB), A3E (AM), F3E (FM),
F1D (FSK)
1st IF
2nd IF
3rd IF
73.05 MHz
8.83 MHz
455 kHz (FM only)
Sensitivity
Power Requirement
Current Drain (approx.)
Operating Temperature
Frequency Stability
13.8 V DC 15%
SSB/CW/FSK (S/N 10 dB)
Less than 4 µV (500 kHz ~ 1.705 MHz),
Less than 0.2 µV (1.705 ~ 24.5 MHz),
Less than 0.13 µV (24.5 ~ 30 MHz),
Less than 0.13 µV (50 ~ 54 MHz)
Less than 31.6 µV (500 kHz ~ 1.705 MHz),
Less than 2 µV (1.705 ~ 24.5 MHz),
Less than 1.3 µV (24.5 ~ 30 MHz),
Less than 1.3 µV (50 ~ 54 MHz)
20.5 A (transmit), 2 A (standby)
14° F ~ +122° F (-10° C ~ +50° C)
Within 10 x 10-6 ( 0.5 x 10-6 with SO-2)
50 Ω
AM (S/N 10 dB)
Antenna Impedance
Microphone Impedance
600 Ω
Dimensions, projections not
included (W x H x D)
10-5/8 × 3-3/4 × 10-11/16 inch
(270 × 96 × 271 mm)
FM (12 dB SINAD)
Less than 0.25 µV (28 ~ 30 MHz),
Less than 0.25 µV (50 ~ 54 MHz)
Weight (approx.)
TRANSMITTER
RF Output Power
15 lbs (6.8 kg)
Squelch Sensitivity
SSB/CW/AM/FSK
Less than 20 µV (500 kHz ~ 1.705 MHz),
Less than 2 µV (1.705~ 30 MHz),
Less than 2 µV (50 ~ 54 MHz)
Less than 0.25 µV (28 ~ 30 MHz),
Less than 0.25 µV (50 ~ 54 MHz)
SSB/CW/FM/FSK: 100 W; AM: 25 W
Modulation
SSB
FM
Balanced modulation
Reactance modulation
Low-power modulation
FM
AM
Spurious Response
Image Ratio
IF Rejection
Others
More than 70 dB
More than 70 dB
More than 50 dB
Maximum Frequency Deviation
(FM)
Less than 5 kHz (wide)
Less than 2.5 kHz (narrow)
Spurious Radiation
Carrier Suppression
Less than -50 dB
More than 40 dB
More than 40 dB
Selectivity
SSB/CW
More than 2.2 kHz (-6 dB),
Less than 4.4 kHz (-60 dB)
Unwanted Sideband
Suppression
AM (wide mode)
FM
More than 4.0 kHz (-6 dB),
Less than 20.0 kHz (-50 dB)
Transmit Frequency Response
(SSB)
400 ~ 2600 Hz (within -6 dB)
More than 12.0 kHz (-6 dB),
Less than 25.0 kHz (-50 dB)
XIT Variable Range
9.99 kHz
RIT Variable Range
Beat Elimination
9.99 kHz
Antenna Tunable Range
16.7 Ω ~ 150 Ω
More than 40 dB
More than 1.5 W
Audio Output Power
(8 Ω, 10% distortion, with -53 dBm input)
Audio Output Impedance
8 Ω
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
These specifications are guaranteed for Amateur Bands only.
14-6, 1-chome, Dogenzaka, Shibuya-ku, Tokyo 150-8501, Japan
P.O. Box 22745, 2201 East Dominguez St., Long Beach, CA 90801-5745, U.S.A.
Customer Support/Brochures (310) 639-5300
6070 Kestrel Road, Mississauga, Ontario, Canada L5T 1S8
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Ingersoll Rand Heat Pump 650666 x User Manual
Insignia Digital Camera NS DSC10A User Manual
Jabra Switch A7010 User Manual
John Deere Electric Heater AC 375LP User Manual
JVC Camcorder GR AX860 User Manual
JVC Printer GV PT1U User Manual
Jwin Stereo System JX CD4000 User Manual
Kalorik Iron USK STP 23783 User Manual
KitchenAid Microwave Oven KCMS145J User Manual
Kodak Digital Camera C135 User Manual