Kenwood DVD Player DVF 3300 User Manual
DVD/VCD/CD PLAYER  
DVF-3300  
INSTRUCTION MANUAL  
B60-5634-18 02 (K/E/X)  
06/01  
OC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution : Read this page carefully to  
ensure safe operation.  
IMPORTANT SAFETY INSTRUCTIONS  
Read Instructions – All the safety and operating instructions  
should be read before the product is operated.  
Retain Instructions – The safety and operating instructions  
should be retained for future reference.  
12.Servicing – Do not attempt to service this product your-  
self as opening or removing covers may expose you to dan-  
gerous voltage or other hazards. Refer all servicing to quali-  
fied service personnel.  
Heed Warnings – All warnings on the product and in the  
operating instructions should be adhered to.  
Follow Instructions – All operating and use instructions  
should be followed.  
13.Damage Requiring Service – Unplug this product from  
the wall outlet and refer servicing to qualified service person-  
nel under the following conditions:  
a) When the power-supply cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into  
the product,  
1. Cleaning – Unplug this product from the wall outlet be-  
fore cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
2. Attachments – Do not use attachments not recom-  
mended by the product manufacturer as they may cause  
hazards.  
3. Water and Moisture – This product shall not be exposed  
to dripping and splashing - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet basement; or near  
a swimming pool; and the like. Do not place an object con-  
taining liquid, such as a flower vase, on the appliance.  
4. Accessories – Do not place this product on an unstable  
cart, stand, tripod, bracket, or table. The product may fall,  
causing serious injury to a child or adult, and serious damage  
to the product. Use only with a cart, stand, tripod, bracket, or  
table recommended by the manufacturer. Any mounting of  
the product should follow the manufacturer’s instructions,  
and should use a mounting accessory recom-  
mended by the manufacturer.  
A product and cart combination should be  
moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the product and  
cart combination to overturn.  
5. Ventilation – Slots and openings in the cabinet are pro-  
vided for ventilation and to ensure reliable operation of the  
product and to protect it from overheating, and these open-  
ings must not be blocked or covered. The openings should  
never be blocked by placing the product on a bed, sofa, rug,  
or other similar surface. This product should not be placed in  
a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have  
been adhered to.  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following  
the operating instructions.  
e) If the product has been dropped or damaged in any  
way, and  
f) When the product exhibits a distinct change in per-  
formance – this indicates a need for service.  
g) If an abnormal smell or smoke is detected.  
Preparations  
14.Replacement Parts – When replacement parts are re-  
quired, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same char-  
acteristics as the original part. Unauthorized substitutions may  
result in fire, electric shock, or other hazards.  
15.Safety Check – Upon completion of any service or re-  
pairs to this product, ask the service technician to perform  
safety checks to determine that the product is in proper op-  
erating condition.  
16.Wall or Ceiling Mounting – This product should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer.  
17.Heat – This product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other  
products that produce heat. Do not place a flaming object,  
such as a candle or lantern, or near the product.  
18.Power Lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other elec-  
tric light or power circuits, or where it can fall into such power  
lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
6. Power Sources – This product should be operated only  
from the type of power source indicated on the product. If  
you are not sure of the type of power supply to your home,  
consult your product dealer or local power company.  
7. CAUTION - Polarization – This product may be  
equipped with a polarized alternating-current line plug (a plug  
having one blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety feature. If you  
are unable to insert the plug fully into the outlet, try reversing  
the plug. If the plug should still fail to fit, contact your electri-  
cian to replace your obsolete outlet. Do not defeat the safety  
purpose of the polarized plug.  
8. Power Cord Protection – Power-supply cords should be  
routed so that they are not likely to be walked on or pinched  
by items placed upon or against them, paying particular at-  
tention to cords at plugs, convenience receptacles, and the  
point where they exit from the product.  
9. Lightning – For added protection for this product during  
a lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line surges.  
19.Outdoor Antenna Grounding – If an outside antenna or  
cable system is connected to the product, be sure the an-  
tenna or cable system is grounded so as to provide some  
protection against voltage surges and built-up static charges.  
Article 810 of the National Electrical Code, ANSI/NFPA 70,  
provides information with regard to proper grounding of the  
mast and supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding conductors,  
location of antenna-discharge unit, connection to grounding  
electrodes, and requirements for the grounding electrode.  
EXAMPLE OF ANTENNA  
GROUNDING AS PER NATIONAL  
ELECTRICAL CODE  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMPS  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
10.Overloading – Do not overload wall outlets, extension  
cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
NEC – NATIONAL ELECTRICAL CODE  
11.Object and Liquid Entry – Never push objects of any  
kind into this product through openings as they may touch  
dangerous voltage points or short-out parts that could result  
in a fire or electric shock. Never spill liquid of any kind on the  
product.  
Notes:  
1. Item 7 is not required except for grounded or polarized  
equipment.  
2. Item 19 complies with UL in the U.S.A.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Unpacking  
Unpack the unit carefully and make sure that all the accessories are present.  
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit  
was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original  
carton and packing materials in case you need to move or ship the unit in the future.  
Keep this manual handy for future reference.  
Accessories  
Please confirm that the following accessories are present.  
Audio cord (Red, White) ...(1)  
Video cord (Yellow) ...(1)  
Coaxial cable (Black) ...(1)  
Remote control unit ...(1)  
Batteries (R03/"AAA" -size) ...(2)  
P
Screen saver  
The screen saver appears when you leave the DVD player in stop mode for about 5 minutes.  
If the Screen saver is displayed for 5 minutes, the DVD player automatically turns itself off.  
For the U.S.A.  
CAUTION:  
Use of controls or adjustments or performance of procedures  
other than those specified herein may result in hazardous radia-  
tion exposure.  
IncompliancewithFederalRegulations, thefollowingarerepro-  
ductionsoflabelson, orinsidetheproductrelatingtolaserprod-  
uct safety.  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO,  
HACHIOJI-SHI,  
TOKYO, JAPAN  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS NO. 21 CFR  
1040.10, CHAPTER 1, SUBCHAPTER J.  
Location: Back Panel  
For the U.S.A.  
FCC WARNING  
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the  
modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change  
or modification is made.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful inter-  
ference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interfer-  
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-  
sures:  
– – Reorient or relocate the receiving antenna.  
– – Increase the separation between the equipment and receiver.  
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
– – Consult the dealer or an experienced radio / TV technician for help.  
For Canada  
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special features and Contents  
Special features  
♦ Higher video quality than S-VHS video and LaserDisc  
♦ Higher audio quality than music CD  
♦ Graphical User Interface (G.U.I.)  
♦ MPEG1 , MPEG2 files, DivX®video playback  
♦ MP3, WMA and JPEG files playback  
This document classifies the applications of each feature using the following marks.  
: Description of a feature that can be used with audio CD (CD-DA).  
: Description of a feature that can be used with DVD video.  
: Description of a feature that can be used with VCD.  
Preparations  
: Description of a feature that can be used with DivX®video.  
: Description of a feature that can be used with JPEG.  
: Description of a feature that can be used with MP3.  
: Description of a feature that can be used with WMA.  
Caution : Read the pages marked  
carefully to ensure safe operation.  
Contents  
Introduction......................................................................................... 2  
Before applying power ................................................................... 2  
Safety precautions ........................................................................... 2  
IMPORTANT SAFETY INSTRUCTIONS .................................... 3  
Special features and Contents........................................................ 5  
Special features ...................................................................................... 5  
Contents ..................................................................................................... 5  
Discs information .............................................................................. 6  
Types of playable discs ......................................................................... 6  
Unplayable discs ..................................................................................... 6  
Region Codes ...................................................................................... 7  
Region codes in the world .................................................................... 7  
Icons on the DVD VIDEO discs ............................................................. 7  
Playable files with this unit ............................................................ 8  
File Specifications .................................................................................. 8  
Guidance of Files..................................................................................... 8  
Video formats.................................................................................... 10  
Important items ................................................................................ 11  
Maintenance .......................................................................................... 11  
Reference ................................................................................................ 11  
Operations  
Basic playback of disc ................................................................... 22  
On screen display.................................................................................. 22  
Last Scene Memory .............................................................................. 22  
Basic play ............................................................................................... 23  
Disc playback features ........................................................................ 24  
Repeat play ............................................................................................. 25  
A-B Repeat play ..................................................................................... 25  
Program play .......................................................................................... 26  
Movie disc playback features ...................................................... 27  
Select Audio Language ........................................................................ 28  
Select the Audio channel .................................................................... 28  
Using Marker ........................................................................................ 28  
Select Camera angle ........................................................................... 29  
Select Subtitle Language .................................................................... 29  
Zoom function ........................................................................................ 30  
3D Surround ............................................................................................ 30  
Time Search............................................................................................ 30  
Music disc playback features ...................................................... 31  
Using the TV screen to start playback ........................................... 31  
Playback from desired track. ............................................................. 31  
3D Surround ............................................................................................ 31  
To display the ID3 tag .......................................................................... 31  
Random play ........................................................................................... 31  
Photo files playback features (JPEG files only)........................ 32  
To start playback .................................................................................. 32  
Zoom function ........................................................................................ 32  
To rotate picture .................................................................................... 32  
To hide the menu bar ............................................................................ 32  
Slide show .............................................................................................. 32  
Preparations  
System Connections........................................................................ 12  
Controls and indicators .................................................................. 14  
Operation of remote control unit .................................................. 15  
Set Up functions ............................................................................... 16  
Preparation for Set Up .......................................................................... 16  
Set up menu ............................................................................................ 16  
Language ................................................................................................. 17  
DISPLAY .................................................................................................. 17  
AUDIO ...................................................................................................... 18  
LOCK (Parental Control) ....................................................................... 18  
OTHERS .................................................................................................... 19  
Hierarchical structure of VCD menus (P.B.C. function) ................ 20  
DVD menu language code list ............................................................ 21  
Area Code list ......................................................................................... 21  
Knowledge  
In case of difficulty.......................................................................... 33  
Specifications .................................................................................. 36  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs information  
Types of playable discs  
The system this unit is using does not only play music from CD but can also play the discs listed below to offer you  
high-quality entertainment of video of movies and live concerts.  
DVD VIDEO  
(DVD-R/RW, DVD+R/RW)  
Playable Disc  
CD (CD-R, CD-RW)  
VCD (SVCD*)  
Logo mark on disc  
Disc size  
8cm  
8cm  
8cm  
12cm  
12cm  
12cm  
Played sides  
One or both  
One or both  
One side only  
One side only  
One side only  
Max. 20 min.  
One side only  
Approx. 41 min.  
(1 side, 1 layer)  
Approx. 75 min.  
(1 side, 2 layers)  
Approx. 82 min.  
(2 sides, 1 layer)  
Approx. 150 min.  
(2 sides, 2 layers)  
Approx. 133 min.  
(1 side, 1 layer)  
Approx. 242 min.  
(1 side, 2 layers)  
Approx. 266 min.  
(2 sides, 1 layer)  
Approx. 484 min.  
(2 sides, 2 layers)  
P
Max. 74 min.  
Video + Audio  
(In case of an SVCD, the possible play-  
back time becomes shorter.)  
Max. 20 min., digital Max. 80 min., digital  
Audio  
Please refer to page 8 for the CD-R, CD-RW, DVD-R, and DVD-RW file formats which can be played back by this unit.  
÷ * This unit can play SVCDs, but some functions will not work.  
÷ A Dual Disc is a two-sided disc combining a DVD side according to the DVD standard and a music side. The video  
content recorded on the DVD side can be played back. As the music side is not compatible with the Compact Disc  
(CD) standard, it cannot be played back on this unit.  
÷ This unit can play back DVD-R and DVD-RW discs recorded in the DVD VIDEO format and DVD+R and DVD+RW  
discs, but depending on the recording unit, the disc manufacturer, etc., playback sometimes may not be possible.  
÷ This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording condi-  
tions, etc.  
÷ ThisplayercannotplaybackdiscscompatiblewithCPRM. CPRMistheabbreviationofContentProtectionforRecord-  
able Media, and it is a technique for copyright protection for recording media.  
Unplayable discs  
This player cannot play back any of the following discs.  
DVD AUDIO discs  
DVD-RAM discs  
SACD discs  
CDV discs (Only the audio part can be reproduced.)  
CD-G/CD-EG/CD-EXTRA discs (Only the audio can be  
reproduced.)  
VSD discs  
÷ A DVD video disc with a region code which does not match this unit or without a region code. For details, see "Region  
Codes".  
÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video  
Formats".  
7
0
Restrictions due to difference between discs  
SomeDVDandVCDdiscscanbeplayedonlyincertainplaybackmodesaccordingtotheinten-  
tions of the software producers. Depending on the condition of this unit, operation may be  
restricted.Asthisplayerplaysdiscsaccordingtotheirintentions,somefunctionsmaynotwork  
as intended by you. Please be sure to read the instructions provided with each disc. When an  
inhibition icon is displayed on the TV screen connected to the player, it indicates that the disc  
being played is under the restriction as described above.  
Inhibition icon  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region Codes  
Every player of this model has a certain region code assigned to it based on the country where the player is used.  
When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region  
codes matching the region code of the player.  
The region code for this player is described on the rear panel of the player.  
Region codes in the world  
The DVD players are given a region code according to the country or area it is marketed, as shown in the follow-  
ing map.  
Preparations  
Professional use disc  
(Air Line cabin service)  
Region codes of the DVD VIDEO discs that can be played with this player  
This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player  
shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below.  
EvenwhenaDVDVIDEOdiscdoesnotcarryanyindicationoftheregioncode, itmaysometimesunabletobeplayed  
on this player due to certain restrictions.  
Icons on the DVD VIDEO discs  
Icon  
Description  
Indicates the region code where the disc can be played.  
Number of voice languages recorded with the audio function. The number in the icon indicates the number of  
voice languages. (Max. 8 languages)  
Numberofsubtitlelanguagesrecordedwiththesubtitlefunction. Thenumberintheiconindicatesthenumber  
of subtitle languages. (Max. 32 languages)  
Numberofanglesprovidedbytheanglefunction.Thenumberintheiconindicatesthenumberofangles.(Max.  
9 angles)  
Aspectratiosthatcanbeselected."4:3Letterbox"standsforLetterBoxand"4:3Panscan"forPan/Scan. &  
In the example on the left, the 16:9 video can be converted into letter box video.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playable files with this unit  
File Specifications  
Category/Item extension  
detail  
(Audio)  
Media  
CD-ROM  
Mpeg1 Layer1 & 2 CD-R  
Mpeg1 Layer1 & 2 CD-RW  
MOVIE [file size : 4GB (Max.)]  
MPEG1  
.MPG, .MPEG video resolution : 720 x 576 (Max.) Bit Rate :5Mbps (Max.)  
MPEG2  
.MPG, .MPEG video resolution : 720 x 576 (Max.) Bit Rate :5Mbps (Max.)  
WAV, MP3, WMA  
Dolby Digital  
DVD-ROM  
DivX® VIDEO*  
XviD  
.AVI, .DIVX  
.AVI, XVID  
video resolution : 720 x 576 (Max.) Bit Rate :10Mbps (Max.)  
video resolution : 720 x 576 (Max.) Bit Rate :10Mbps (Max.)  
DVD-R  
WAV, MP3, WMA  
Dolby Digital  
DVD+R  
DVD-RW  
DVD+RW  
6
MUSIC [file size : 4GB (Max.)]  
MPEG Audio  
WMA (ver7)  
WMA (ver8)  
.MP3  
Layer III Bit Rate 8 - 320 kbps, CBR/VBR  
FS 32k, 44.1k, 48k  
FS 32k, 44.1k, 48k  
FS 32k, 44.1k, 48k  
.WMA  
.WMA  
Bit Rate 32 - 320 kbps, CBR  
Bit Rate 32 - 320 kbps, CBR  
PHOTO [file size : 4MB (Max.)]  
P
JPEG  
.JPG, .JPEG  
video resolution : 3072 x 2048 (Max.) 24bit True color  
÷
÷
Depending on the data recording condition and other factors, playback may not be possible.  
Usable formats for MP3/WMA/JPEG : ISO9660 level 1, 2, 3 (excluding expanded formats : Joliet, Romeo)  
®
*Official DivX Certified product.  
®
®
®
Plays all versions of DivX video (including DivX 6) with standard playback of DivX media files.  
Guidance of Files  
Creating media for playing back on this equipment  
Compressing MP3/WMA  
Please set up the transfer bit rate setting for the compression software when compressing MP3/WMA files as follow.  
MP3 Files : 128kbps recommended (8 - 320 kbps)  
WMA Files : 128kbps recommended (32 - 320 kbps)  
÷ This unit is compatible with 32 kHz, 44.1 kHz(recommended) and 48 kHz sampling frequencies.  
÷ This unit is compatible with ID3-TAG Ver. 1. (Alphanumeric sign : up to 30 characters)  
÷ DIGITAL output of MP3/WMA data is done not as MP3/WMA data, but as PCM data.  
Naming folders and files  
Single-byte characters between A and Z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be  
displayed. Ensure that the extension log is attached to all file names.  
÷ Never add the wrong extension log to any files, the equipment will assume that they can be played back, and this will  
produce loud noises in the speakers, resulting in damage of adverse effects.  
NNoottee  
Folder names and file names are displayed up to 20 characters. When folder names and file names are recorded with more  
than 20 characters, the names will be displayed in abbreviated form.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playable files with this unit  
Confirming media and files  
Check to ascertain that MP3/WMA files can be played back correctly on the personal computer in use prior to saving them onto the  
media. Check to ensure that the saved file can be played back normally.  
÷ It is not possible to confirm that files can be played back correctly while they are being saved onto the media.  
When saving files onto media  
Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session  
has not be closed or finalized will not be played back correctly with this equipment.  
÷ There are cases where the folder names and file names will not be displayed correctly depending on the software used to save  
them.  
÷ Do not store files or folders other than playable files on media to be played back with this equipment.  
÷ It is recommended that ten or less sessions are stored when recording MP3/WMA files onto a media.  
÷ In case of a multisession disc, some time may be required until playback begins.  
÷ There are cases where playback is not possible when DivX/MP3/WMA/JPEG files (CD-ROM) and music CD information (CD-DA) are  
saved on the same media.  
Preparations  
Example for a hierarchical structure  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video formats  
TV formats of major countries  
The TV picture display and disc signal systems can be  
divided roughly into two TV formats (NTSC and PAL).  
TV Format  
Major Countries & Areas  
Japan, Taiwan, Korea, USA, Canada,  
Mexico, Philippines, Chile, etc.  
NTSC  
They are variable depending on countries and areas.  
China, U.K., Germany, Australia, New  
Zealand, Kuwait, Singapore, etc.  
PAL  
This unit has a function for changing the video format according to the TV type. Please confirm the type of your TV.  
Checking the Video Format  
Check the video format of the TV to be used  
To select TV Type (only for Europe and  
Australia)  
1 Removethediscfromtheunit,thenclosethetray.  
When the video formats are different :  
P
Try playing the disc. If the video formats of the disc and TV  
do not match, the played video may be black and white or  
become as shown below.  
2 Press and hold the PAUSE key on the front panel  
for more than 5 seconds to be able to select a TV  
type (PAL, NTSC or AUTO).  
Top and bottom edges are not  
displayed.  
Top and bottom areas are dark.  
Picture turbulence due to sync  
unmatching.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important items  
Maintenance  
Maintenance of the unit  
In regard to contact cleaner  
Whenthefrontpanelorcasebecomesdirty,wipewithasoft, Do not use contact cleaners because it could cause a malfunction.  
dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for  
agents may cause discoloration.  
they may deform the plastic component.  
Reference  
Disc handling precautions  
Never play a cracked or warped disc  
Preparations  
During playback, the disc rotates at high speed in the player. Therefore,  
to avoid danger, never use a cracked or deformed disc or a disc repaired  
with tape or adhesive agent. Please do not use discs which are not  
round because they may cause malfunction.  
Handling  
Hold the disc so that you do not touch the  
playing surface.  
Label side  
Playing side  
Disc accessories  
Sticker  
The disc accessories (stabilizer, protection sheet, protection ring, etc.)  
which are marketed for improving the sound quality or protecting discs  
as well as the disc cleaner should not be used with this system because  
they may cause malfunction.  
Do not attach paper or tape to either the  
playing side or the label side of the disc.  
Sticky paste  
Cleaning  
If there are fingerprint marks or foreign matter  
found on the disc, lightly wipe the disc with a  
soft cotton cloth (or similar) from the center of  
the disc outwards in a radial manner.  
Storage  
When a disc is not to be played for a long pe-  
riod of time, remove it from the player and  
store it in its case.  
Note related to transportation and movement  
Before transporting or moving this unit, carry out the  
following operations.  
Caution on condensation  
Condensation(ofdew)mayoccurinsidetheunitwhenthereisagreat  
differenceintemperaturebetweenthisunitandtheoutside.Thisunit  
maynotfunctionproperlyifcondensationoccurs. Inthiscase, leave  
theunitforafewhoursandrestarttheoperationafterthecondensa-  
tion has dried up.  
1. Set the POWER ON/OFF switch to the ON  
without loading a disc.  
2. Wait a few seconds and verify that the display  
shown appears.  
Bespeciallycautiousagainstcondensationinthefollowingcircum-  
stances:  
(no disc)  
When this unit is carried from one place to another across a large  
difference in temperature, when the humidity in the room where  
this unit is installed increases, etc.  
3. Set the POWER ON/OFF switch to OFF.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections  
Make connections as shown below.  
When connecting the related system components, refer also to the instruction manuals of the related components.  
CAUTION  
Malfunction of microcomputer  
Connect the components as shown in the diagram. Only  
plug the AC power cord into an AC wall outlet once con-  
nections are completed.  
If operation is not possible or erroneous display appears even  
thoughallconnectionshavebeenmadeproperly,resetthemi-  
crocomputer referring to "In case of difficulty". ‹  
CAUTION  
Install the equipment so that the power outlet is easily ac-  
cessible and, in case of emergency, immediately unplug the  
power cord from the power outlet.  
The power in this equipment will not be completely cut off  
from the AC wall outlet when the main switch is turned OFF.  
P
Connecting to a TV with video (composite) or S-video input terminal  
Video cord  
Audio cord  
Rear panel example  
(for U.S.A.)  
TV  
R
L
VIDEO  
AUDIO  
INPUT  
S VIDEO  
*Connect only either the video (com  
posite) cord or the S-video cord.  
*S-video (Commercially available)  
(Except for Europe)  
& "TV Output Select (only for Europe)"  
Connecting to a TV with SCART input terminal (For Europe)  
Rear panel example  
( For Europe)  
TV  
INPUT  
SCART  
SCART cable (Commercially available)  
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the  
copy protection system.  
NNoottee  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections  
Connecting to a TV with Component input terminals  
Video cord  
TV  
Audio cord  
Rear panel example  
(For U.S.A.)  
Preparations  
& "TV Output Select  
(only for Europe)"  
Component cords (Commercially available)  
Connecting to an Audio component  
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-  
nection.  
Audio cord  
Coaxial cable  
Rear panel example  
(For U.S.A.)  
TV  
R
L
VIDEO  
AUDIO  
INPUT  
COAXIAL  
DIGITAL INPUT  
AV receiver or AV Amplifier  
Video cable, S-video cable, or Component cords (Commercially available) (@)  
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:  
Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo  
system, using the audio cords.  
Amplifierequippedwith2-channeldigitalstereo(PCM)oramulti-channeldecoder(DolbyDigital™,MPEG2,orDTS):  
Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL) to the corresponding in jack on your amplifier. Use a digital (coaxial)  
cable.  
DTS disclaimer clause  
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible  
damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is  
connected to an amplification system.  
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to  
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.  
1. In case an associated system component is connected, also read the instruction manual of the component.  
2. If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces  
a strong, distorted sound or no sound at all.  
NNootteess  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators  
Display  
÷DVD video:  
Elapsed time of the chapter being played  
÷Audio CD, VCD, DivX, MP3:  
Elapsed time of the track (or file) being  
played  
P
÷At the time of audio CD stop mode:  
"00:00" displayed  
7
8
2
4
1
3
5
6
1 ON/STANDBY key %^£  
6 3(Play) key  
7 7(Stop) key  
8 8(Pause) key  
£
¢
^¢  
2 Disc tray  
£
£
%
3 0(Open/Close) key  
4 Remote sensor  
5 4(PREV.), ¢(NEXT) (Skip) /  
Search keys  
¢
STANDBY MODE  
At the time of power off with the power cord inserted  
into a power outlet, a small amount of power is supplied  
to the system to back up the memory. This is called  
standby mode. Under the condition, the system can be  
turned ON by the remote control unit.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of remote control unit  
The keys on the remote control unit with the same names as on the main  
unit have the same function as the keys on the main unit.  
1
0
!
@
1 POWER key  
9 MARKER key  
•
2 TOP MENU key  
£
(MARKER) SEARCH key  
2
3
3 Cursor (5) Up, (∞) Down,  
(2) Left and (3) Right keys  
^£§¶º  
ENTER key  
•
0 (0) OPEN/CLOSE key£  
4
5
! MENU key  
@ ON SCREEN key  
£
^£§•º  
™⁄  
#
$
%
Preparations  
4 RETURN key  
5 ZOOM key  
)
# 4 (PREV.) key/¢  
(NEXT) key (Skip key)¢  
3(Play) key  
º¤  
8(Pause) key ^¢  
6
(Slow) key  
£§¶⁄  
7(Stop) key  
¢
$ P.MODE key  
% CLEAR key &§•  
§
6 Numeric keys ¶º  
7
8
9
^
&
^ ANGLE key  
ª
^
7 AUDIO key  
SUBTITLE key  
8 REPEAT key  
•⁄  
SETUP  
ª
& RANDOM key ª⁄  
∞
A-B (A-B repeat) key ∞  
Model : RC-D0314 (Infrared ray system)  
Loading batteries  
1 Remove the cover.  
2 Insert batteries.  
3 Close the cover.  
÷ Insert two R03 (“AAA”-size) batteries  
following the polarity indications.  
Operation  
Remote  
sensor  
Insertthepowerplugintoapoweroutlet,presstheON/  
STANDBYkeyofthemainunitorthePOWERkeyonthe  
remote control to on, then press the desired key.  
Operating range  
(approx.)  
6m  
÷ When pressing more than one remote control keys succes-  
sively, press the keys securely by leaving an interval of 1 sec-  
ond or more between pressing of keys.  
1. The provided batteries are intended for use in operation checking, and their service life may be short.  
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.  
NNootteess  
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,  
malfunction may occur. In such a case, change the installation position to avoid malfunction.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
Preparation for Set Up  
1PresstheON/STANDBYkey to  
2Set Video Format according to the connected TV type. (To select TV Type 0)  
power on.  
If the video formats of the disc and TV do not match, press  
and hold PAUSE key on the front panel for more than 5 sec-  
onds to be able to select a TV type (PAL, NTSC or AUTO).  
(No disc inserted)  
MAIN UNIT  
Set up menu  
Initial Settings  
By using the Setup menu, you can make various adjustments to items such as picture and sound.  
You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup  
menu item, see pages 17 to 20.  
P
To display and exit the Menu:  
General Operation  
PressSETUPkey todisplaythemenu.Asecondpress  
of SETUP key will take you back to initial screen.  
1 Press SETUP key.  
The Setup menu appears.  
2 UsetheCursorup/down(5/∞)keysontheremote  
to select the desired option, then press the Cur-  
sor right (3) key to move to the second level.  
Thescreenshowsthecurrentsettingfortheselected  
item, as well as alternate setting(s).  
To go to the next level:  
Press the Cursor right ( 3) key on the remote.  
To go back to the previous level:  
Press the Cursor left ( 2) key on the remote.  
3 UsetheCursorup/down(5/∞)keysontheremote  
toselecttheseconddesiredoption,thenpressthe  
Cursor right (3) key to move to the third level.  
4 UsetheCursorup/down(5/∞)keysontheremote  
toselectthedesiredsetting,thenpressENTERkey  
to confirm your selection. Some items require  
additional steps.  
5 Press SETUP key or PLAY key to exit the Setup  
menu.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
LANGUAGE  
DISPLAY  
Preparations  
Menu Language  
SelectalanguagefortheSetupmenuandon-screen  
display.  
TV Aspect  
4:3: Select when a standard 4:3 TV is connected.  
16:9: Select when a 16:9 wide TV is connected.  
Disc Audio/ Disc Subtitle/ Disc Menu  
Select the language you prefer for the audio Track (disc  
audio), subtitles, and the disc menu  
Display Mode  
Display Mode setting works only when the TV Aspect  
mode is set to "4:3".  
Original: Refers to the original language in which the  
disc was recorded.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Other: To select another language, press numeric keys  
then ENTER key to enter the corresponding digit num-  
ber according to the language code list in the reference  
chapter. If You enter the wrong Language code, press  
Panscan:AutomaticallydisplaysthewidePictureonthe  
entire screen and cuts off the portions that do not fit.  
Progressive Scan  
If you are using the COMPONENT VIDEO jacks, but are  
connecting the DVD Player to a standard (analog) televi-  
sion, set Progressive Scan to Off.  
CLEAR key.  
¡
If you are using the COMPONENT VIDEO jacks for  
connection to a TV or monitor that is compatible with a  
progressive scan signal, set Progressive Scan to On.  
NNoottee  
Once the setting for progressive scan output is entered,  
an image will only be visible on a progressive scan com-  
patible TV or monitor. If you set Progressive Scan to On  
in error, you must reset the unit.  
1Press 7(stop) key to stop any disc that is playing.  
2Press7(stop)keyagainformorethan5seconds.  
Thevideooutputwillberestoredtothestandardsetting,  
and a picture will once again be visible on a conventional  
analog TV or monitor.  
TV Output Select (only for Europe)  
Set the player's TV Output Select options according to  
the TV connection type.  
RGB: When your TV is connected with the SCART jack.  
Y CB CR: When your TV is connected with the COMPO-  
NENT VIDEO jacks on the DVD player.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
AUDIO  
LOCK (Parental Control)  
EachDVDdischasavarietyofaudiooutputoptions.Set  
the player’s AUDIO options according to the type of  
audio system you use.  
Rating  
Some movies contain scenes that may not be suitable  
for children to view. Many of these discs contain paren-  
tal control information that applies to the complete disc  
or to certain scenes on the disc. Movies and scenes are  
ratedfrom1to 8, dependingonthecountry.Somediscs  
offer more suitable scenes as an alternative.  
Dolby Digital/ DTS/ MPEG  
Bitstream:Select"Bitstream"ifyouconnecttheDVD  
Player’s DIGITAL OUT jack to an amplifier or other  
equipment with a Dolby Digital, DTS or MPEG de-  
coder.  
P
PCM (for Dolby Digital/ MPEG): Select when con-  
nected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital or MPEG will be auto-  
matically down mixed to two-channel PCM audio.  
The parental control feature allows you to block access  
to scenes below the rating you input, thereby prevent-  
ing your children from being able to view material you  
believe is unsuitable.  
Off (for DTS): If you select “Off'', the DTS signal is  
not output through the DIGITAL OUT jack.  
1 Select "Rating" on the LOCK menu then press  
the Cursor right (3) key.  
2 To access the Rating, Password and Area Code  
features, you must input the 4-digit password  
youcreated. Ifyouhavenotyetenteredapass-  
word you are prompted to do so.  
Sample Freq. (Frequency)  
If your receiver or amplifier is NOT capable of handling  
96 kHz signals, select 48 kHz. When this choice is made,  
this unit automatically converts any 96 kHz signals to 48  
kHz so your system can decode them.  
Inputa4-digitpassword andpressENTERkey.  
Enter it again and press ENTER key to verify. If  
youmakeamistakebeforepressingENTERkey,  
press CLEAR key.  
If your receiver or amplifier is capable of handling 96 kHz  
signals,select96kHz.Whenthischoiceismade,thisunit  
passes each type of signal through without any further  
processing.  
3 Select a rating from 1 to 8 using the Cursor up/  
down (5/∞) keys.  
Check the documentation for your amplifier to verify its  
capabilities.  
When the disc prohibits 96 kHz digital output, the signal  
always is put out after down-conversion.  
Rating 1-8: Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
Unlock  
DRC (Dynamic Range Control)  
Ifyouselectunlock, parentalcontrolisnotactiveandthe  
disc plays in full.  
With the DVD format, you can hear a program's  
soundtrack in the most accurate and realistic presenta-  
tion possible, thanks to digital audio technology. How-  
ever, you may wish to compress the dynamic range of  
the audio output (the difference between the loudest  
sounds and the quietest ones). This allows you to listen  
to a movie at a lower volume without losing clarity of  
sound. Set DRC to On for this effect.  
NNoottee  
If you set a rating for the player, all disc scenes with the  
same rating or lower are played. Higher rated  
scenes are not played unless an alternate scene is avail-  
ableonthedisc. Thealternativemusthavethesamerat-  
ingoralowerone.Ifnosuitablealternativeisfound,play-  
back stops. You must enter the 4-digit password or  
change the rating level in order to play the disc.  
This function operates only at the time of playback of  
DVDs recorded with Dolby Digital.  
Vocal  
Set to on only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into nor-  
mal stereo sound.  
4 Press ENTER key to confirm your rating selec-  
tion, then press SETUP key to exit the menu.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
LOCK (Parental Control)(Continued)  
OTHERS  
Preparations  
Password (Security Code)  
PBC  
Set Playback Control (PBC) to On or Off.  
You can enter or change password.  
On: Video CDs with PBC are played according to the  
PBC.  
1 SelectPasswordontheLOCKmenuthenpress  
the Cursor right (3) key.  
2 Follow step 2 as shown "Rating" part (*).  
Off:PBCisswitchedoffandnormalplaybackismade.  
"Change" or "New" is highlighted.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures.  
Set your preference and monitor’s ability.  
3 Enter the new 4-digit code, then press ENTER  
key. Input it again to verify.  
4 Press SETUP key to exit the menu.  
On: Expanded grey scale. (0 IRE cut off)  
If you forget Password  
Off: Standard grey scale. (7.5 IRE cut off)  
If you forget your password you can clear using the fol-  
lowing steps:  
The B.L.E. function works NTSC system only.  
NNoottee  
1 Press SETUP key to display the Setup menu.  
2 Inputthe6-digitnumber"210499"andthepass-  
word is cleared.  
3 Enter a new code as described above.  
Area Code  
Enter the code of the country/area whose standards  
were used to rate the DVD video disc, based on the list  
in the reference chapter.  
Ratings are Area-dependent.  
1 Select "Area Code" on the LOCK menu, then  
press the Cursor right (3).  
2 Follow step 2 as shown "Rating" part (*).  
3 Select the first character using the Cursor up/  
down (5/∞) keys.  
4 Shift the cursor using theCursorright(3)key.  
and select the second character using the Cur-  
sor up/down (5/∞) keys.  
5 Press ENTER to confirm your Area code selec-  
tion.  
¡
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
OTHERS(Continued)  
DivX(R) VOD  
DivX(R) Video On Demand  
You can display the DivX DRM (Digital Rights  
Management) Registration code for your unit only.  
The Registration code is used for VOD (Video-On-  
Demand) service agent. You can purchase or rent an  
encrypt movie file.  
Your registration code is : XXXXXXXX  
To learn more visit  
www.divx.com/vod  
(Done)  
If you rent the DivX VOD file, it has several options of viewing limits as shown below.  
• Display the number which you  
can watch the file.  
• Display the authorization error.  
• The rental has been expired.  
P
View DivX(R) VOD Rental  
This rental has 3 views left.  
Authorization Error  
Rental Expired  
(Done)  
This player is not authorized  
to play this video.  
Do you want to use one  
of you 3views now?  
(Done)  
(Yes)(No)  
Hierarchical structure of VCD menus (P.B.C. function)  
When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more  
details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that  
the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selec-  
tions on the menu screens.  
Example for a hierarchical structure  
First level (menu)  
Second level (submenu)  
Third level (scenes)  
Advancing  
Returning  
When an item is selected on the menu screen with the  
ENTER(Select)keyorthenumerickeys, advanceismadeto  
the next lower menu level. When the advance destination  
is the "scene" to be played, the contents will be played.  
Each time the RETURN key is pressed, return is made to the  
next higher menu.  
÷ When several menus (scenes) can be selected in each  
level, screen switching is possible with the keys ¢  
(NEXT) and 4(PREV.).  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up functions  
DVD menu language code list  
Language  
Code  
Language  
Code  
Language  
Code  
Language  
Code  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Lingala  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Sindhi  
Preparations  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Hebrew  
Hindi  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Korean  
Kurdish  
Laothian  
Latin  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Area Code list  
Area  
Code  
Area  
Code  
Area  
Code  
Area  
Code  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
AF  
AR  
AU  
AT  
BE  
BT  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
ET  
FJ  
FI  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Uganda  
SA  
SN  
SG  
SK  
SI  
ZA  
KR  
ES  
LK  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
KE  
KW  
LY  
LU  
NL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
Norway  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Zimbabwe  
Kenya  
Kuwait  
Libya  
PT  
RO  
El Salvador  
Luxembourg  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback of disc  
On screen display  
Theon-screenBannerDisplaycontainsmanyplaybackfeatures. ToseetheBannerDisplay, pressONSCREENkey  
on the remote while a disc is playing. Use the Cursor up/down (5/∞) keys on the remote to move through the  
different features in the Banner Display. Each feature is illustrated with an icon.  
Example:  
On-Screen Display during playing DivX  
On-Screen Display during playing DVD video  
Title Number  
Track Number  
Chapter Number  
Time search  
Time search  
Audio language  
and Digital Audio  
Output mode  
Audio language  
and Digital Audio  
Output mode  
Subtitle language  
Sound  
Subtitle language  
Angle  
Sound  
O
On-Screen Display during playing VCD  
Track Number  
(or PBC mode)  
Time search  
Audio Channel  
NNoottee  
The on screen display is switched off when no operation is  
performed for a few seconds.  
Sound  
Last Scene Memory  
This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you  
removethediscfromtheplayerorswitchofftheplayer. Ifyouloadadiscthathasthescenememorized, thescene  
is automatically recalled.  
If you don't want to use the Last Scene Memory, press the STOP key during stop.  
This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.  
NNoottee  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback of disc  
Basic play  
Load a disc.  
1
Label side  
1 Press the ON/STANDBY key to power on.  
MAIN UNIT  
REMOTE  
ON/STANDBY  
2 Open the tray.  
MAIN UNIT  
REMOTE  
0
3
3 Place a disc.  
Start playback.  
2
● To start playback of DVD video, audio CD or VCD.  
Elapsed time of the chapter, track or file display.  
MAIN UNIT  
REMOTE  
Operations  
÷ When the 3 key is pressed while a tray is open, the tray  
When a menu screen is recorded on the DVD disc,  
the menu screen will be displayed when the TOP  
MENU key or MENU key is pressed. At the menu  
screen, the menu can be selected by pressing the  
Cursor keys.  
closes automatically, and then playback begins.  
When a Disc Menu appears on the screen  
NNoottee In case of interactive DVDs, a Disc Menu appears on the  
screen. Then press ENTER to select specific menu you  
want to play by using Cursor keys.  
● To start playback of audio CD, DivX, MP3, WMA or JPEG files.  
÷ It is not possible to play back folders and files that exceed the maximum limitations of the media.  
÷ A certain amount of time is required for the player to confirm the media on which DivX/MP3/WMA/JPEG files have been  
recorded before playback will commence.  
Press Cursor up/down (5/∞) keys on the remote to  
select desired track or file, then press the PLAY  
key or the ENTER key to start playback.  
DISC menu appears  
Example of MP3 menu  
File types  
Example of JPEG menu  
Preview window  
Press and hold Cursor up/down (5/∞) keys to go to the  
next / previous page or press MENU key on the remote  
to go to the next page.  
or  
÷ WhenJPEGfilesaredisplayed,thedisplayisswitchedautomati-  
cally from one file to the next.(Slide Show )  
÷ When different file types like music,  
photo, and movie files are mixed on  
one disc, press the TOP MENU key  
and select the file type (music,  
photo, movie 8) to be played  
back.  
÷ Afterallfilesofafolderhavebeenplayed,playbackwillstop.  
Notas ÷ If you are in a file list on the MP3/WMA menu and want  
toreturntothefolderlist,use Cursorup/down(5/∞)keys  
on the remote to highlight  
and press ENTER key.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback of disc  
NNootteess  
8
÷ You won't hear the sound (audio) on the DVD, VCD and DivX  
when you're using the Skip, Search, Step or Slow motion  
features.  
7
7 8  
4,¢  
÷ Playback features are not available during the opening cred-  
its of a movie.  
4,¢  
Disc playback features  
Tostopplayback  
Topauseplayback  
MAIN UNIT  
REMOTE  
MAIN UNIT  
REMOTE  
÷ Each press pauses and plays the disc alternately.  
÷ During DVD playback, step operation is performed each  
time this key is pressed. ()  
Skipping chapters, tracks or files  
÷ The chapter (or track) in the direction of the key pressed is  
skipped, and the selected chapter (or track) will be played  
from the beginning.  
MAIN UNIT  
REMOTE  
÷ When the 4key is pressed once during playback, the chap-  
ter (or track) being played will be played from the beginning.  
÷ When the 4key is pressed within 3 seconds after the start  
of chapter (or track) playback, playback starts from the start  
of the preceding chapter (or track).  
O
4: To skip backward  
¢: To skip forward  
The Chapter feature won't work if the disc isn't for-  
NNoottee  
matted with separate chapters.  
Searching  
1 During playback, press 4 or ¢ key for more  
than 2 seconds.  
MAIN UNIT  
REMOTE  
2 Press and hold 4or ¢key repeatedly.  
÷ Each press and hold switches the searching speed.  
(At the time of DVD video/DivX playback)  
1 "#" (¢key) or "#" (4key)  
MAIN UNIT  
REMOTE  
2 "##" (¢key) or "##" (4key)  
3 "###" (¢key) or "###" (4key)  
4 "####" (¢key) or "####" (4key)  
(At the time of audio CD/VCD/MP3/WMA playback)  
1 "#" (¢key) or "#" (4key)  
2 "##" (¢key) or "##" (4key)  
3 "###" (¢key) or "###" (4key)  
4 : To search backward (FR)  
¢ : To search forward (FF)  
÷ Press the 3key at any time to resume normal playback.  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback of disc  
Repeat play  
A-B Repeat play  
Desired title, chapter, track or disc can be played back  
repeatedly.  
The A-B repeat function lets you mark a segment to re-  
peat between the beginning "A" and the end "B" of the  
segment you want to replay.  
At the time of DVD video playback.  
÷"Chapter ": Repeat the chapter that is playing.  
1 Press the A-B key on the remote when you want  
÷"Title "  
: Repeat the title that is playing.  
to choose a scene (sound) as the beginning  
At the time of audio CD/VCD playback.  
point.  
÷"Track"  
÷"All"  
: Repeat the track that is playing.  
: Repeat the disc that is playing.  
Repeat A icon  
At the time of DivX/MP3/WMA playback.  
÷"Track"  
÷"All"  
: Repeat the file that is playing.  
: Repeat the folder that is playing.  
÷ "A" display appears.  
2 Press the A-B key again to choose a scene  
(sound) as the end point.  
During playback, press the REPEAT key on the  
remote.  
Repeat A-B icon  
Repeat icon  
÷ "A - B" display appears and the repeat sequence begins.  
÷ To cancel A-B Repeat playback, press the A-B key.  
Each press the key switches the REPEAT mode  
At the time of DVD video playback.  
1 "Chapter"  
2 "Title"  
3 "Off" (Repeat off)  
At the times of audio CD/VCD/DivX/MP3/WMA  
playback.  
Operations  
1 "TRACK"  
2 "ALL"  
3 Goes off (Repeat off)  
÷ To cancel repeat playback, press the REPEAT key and  
select "Off".  
If you press SKIP (¢) once during Repeat Chap-  
ter or Repeat Track playback, the repeat playback  
cancels.  
NNoottee  
P.B.C. on mode of VCD, the Repeat play function  
does not work. )  
NNoottee  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback of disc  
Program play  
You can listen to the desired tracks of the current CD, MP3 or WMA in any desired order.  
Program Edit  
To repeat program play  
During program playback, press the REPEAT  
key on the remote.  
1 Insert a disc and close the tray. (£)  
Audio CD or MUSIC menu appears.  
2 Press P.MODE key  
Each press the key switches the mode.  
1 "TRACK" : repeats the current track or file.  
2 "ALL" : repeats all the tracks (files) on programmed list.  
3 Goes off (repeat off)  
The  
mark will appear to the right of the word "Pro-  
E
gram" on the right side of the menu screen.  
Example of audio CD menu  
If you press SKIP (¢) once during Repeat Track  
playback, the repeat playback cancels.  
mark  
E
NNoottee  
E
Delete a track from Program list  
1 During STOP mode, press P.MODE and the  
E
mark will appear.  
"Program"  
"List"  
To exit the Program Edit mode, Press P.MODE key again.  
3 Select a specific track on the "List" by Press Cur-  
sor up/down (5/∞) keys, then press ENTER key  
to place the selected track on the "Program" list.  
2 Press the Cursor (2/3/5/∞) keys to select the  
track that you wish to delete from the Program  
list.  
O
4 You can select maximum 30 values by repeating  
step 3.  
3 Press CLEAR key.  
5 Select the track you want to start playing on  
the Program list.  
Delete the complete Program list  
1 During STOP mode, press P.MODE and the  
E
mark will appear.  
6 Press PLAY key to start.  
2 Select "Clear All", then press ENTER key.  
Playback begins in the order in which you programmed  
tracks. Playback stops after all of the tracks on the  
Program list have played once.  
The complete program for the disc is deleted.  
÷ The programs are also cleared when the disc is re-  
moved.  
÷ The unit stops when the STOP (7) key is pressed. To  
restart program play, press the PLAY key.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie disc playback features  
ON SCREEN  
5,∞  
3
Numeric keys  
STEP (freeze frame and frame advance)  
÷ During playback, press the PAUSE key.  
÷ Each time you press the key, the picture advances one  
frame.  
REMOTE  
÷ Press the 3key to resume normal playback.  
Slow motion playback  
REMOTE  
÷ During playback, press the SLOW keys.  
÷ Each press switches the motion speed.  
(Slow Reverse is not possible)  
1 1/7 (  
2 1/6 (  
3 1/4 (  
4 1/2 (  
key)  
key)  
key)  
key)  
Operations  
÷ Press the 3key to resume normal playback.  
Playback from desired title, chapter or track  
Because DVD video discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD).  
(At the time of DVD video playback)  
(At the time of VCD playback)  
REMOTE  
REMOTE  
1 Press ON SCREEN key.  
Press the numeric keys, then press the 3 (play)  
key.  
(Example) To select track No. 23 : 23  
2 Press the Cursor up/down (5/∞) keys on the re-  
mote to select the title or chapter icon.  
Title/Track icon  
Chapter icon  
P.B.C. on mode of VCD, the Selecting a Track func-  
tion may not work. )  
NNoottee  
3 Press the numeric keys, then press the 3 (play)  
key.  
(Example) To select track No. 23 : 23  
The Chapter feature won't work if the disc isn't for-  
matted with separate chapters.  
NNoottee  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie disc playback features  
Select Audio Language  
Using Marker  
If the disc was created with different language tracks,  
youcanusetheAUDIOkeyontheremotetotemporarily  
change the DVD player’s Audio setting.  
Themarker featureletsyoumarkapointonthediscthat  
you can go to quickly. You can store up to 9 marker  
points  
WithDVD-RWdiscsrecordedinVRmodethathaveboth  
a main and a Bilingual audio channel, you can switch  
betweenMain(L), Bilingual(R), oramixofboth(Main+  
Bilingual) by pressing AUDIO.  
Create the Marker  
1 When you reach the scene you want to mark,  
press MARKER key.  
During playback, press the AUDIO key on the re-  
mote.  
Marker icon  
Audio language icon  
(DVD)  
÷ The marker icon appears on the TV screen briefly.  
÷ Repeat to enter up to 9 marker points.  
(DivX)  
To recall or clear a marked scene  
1 During playback, press the SEARCH key on the  
remote.  
Marker search icon  
The language is switched each time the AUDIO  
key is pressed.  
÷ The marker search menu appears on the screen.  
1. The language feature only works if the disc was cre-  
NNootteess  
ated with multiple audio tracks.  
2 Press the Cursor right/left (2/3) keys on the re-  
mote to select a marker number that you want  
to recall or clear.  
2. When you chose an audio language by the AUDIO  
key, you only override the audio language setting in  
the DVD Player's main menu (in the Language Pref-  
erences menu within Setup menu) temporarily.  
O
Select the Audio channel  
You can choose to play back only the right or the left  
channelofaudiorecordedonthedisc, oryoucanselect  
stereo playback.  
3 Press the ENTER key to playback from the  
marked scene or press the CLEAR key to clear  
the selected number.  
To recall  
To clear  
During VCD playback, press the AUDIO key on  
the remote.  
Audio channel icon  
Each press the key switches the mode.  
1 LEFT  
2 RIGHT  
3 STEREO  
NNootteess  
÷ If all 9 marker points are in use, you can still mark new scenes,  
but the previous marker points will be erased.  
÷ Depending on the disc, the marker function may not work.  
÷
P.B.C. on mode of VCD, the marker function does not work.  
)
Clearing all marker points  
÷ The marker points are cleared each time a disc is removed  
from the player or when the power is turned off.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie disc playback features  
Select Camera angle  
Some disc contains multiple angles particular scene or  
sequence. If the disc only has one angle, this feature  
won’t work.  
Select Subtitle Language  
You can change the Subtitle language while you’re  
watching a disc (but only if the disc was created  
with subtitles).  
When you are playing a DVD disc contains scenes re-  
cordeddifferentcameraangles,theangleindicatorwill  
blink on the TV screen.  
During playback, press the SUBTITLE key on the  
remote.  
Subtitle language icon  
1 During the angle indicator has blinked, press  
the ANGLE key on the remote.  
Angle icon  
The language is switched each time the SUB-  
TITLE key is pressed.  
1. The subtitle feature only works if the disc was cre-  
NNootteess  
ated with multiple subtitle tracks.  
2. The subtitle menu of the disc appears in some discs.  
3. The subtitle file of the DivX file is displayed only srt,  
txt, smi, ssa and sub.  
4. If there is no information or there is a code that can  
not read in the DivX file, " 1 " etc are displayed.  
2 Select the Camera angle with press the ANGLE  
key.  
Operations  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie disc playback features  
Zoom function  
Time Search  
Use zoom to enlarge the video image.  
To start playing at any chosen time on the disc.  
1 During playback, press the ZOOM key on the  
1 During playback, press the ON SCREEN key on  
remote.  
the remote.  
The square frame appears briefly in the right bottom of the  
picture.  
The time search box shows the elapsed playing time.  
Each press the key switches the mode.  
1 200% size  
2 Press Cursor up/down (5/∞) keys on the remote  
2 400% size  
to select the time clock icon.  
3 900% size  
4 normal size  
Time clock icon  
2 Press the Cursor (2/3/5/∞) keys on the  
remote to move through the zoomed picture.  
÷ "-:--:--" appears.  
3 Input the required start time in hours, minutes  
and seconds from left to right.  
÷ To resume normal playback, press ZOOM or CLEAR key  
repeatedly.  
1. Zoom may not work on some DVDs.  
2. Screen fit mode is available for playing the DVD  
NNootteess  
disc and movie file.  
÷ Ifyouenterthewrongnumbers,pressCLEARtoremove  
the numbers you entered. Then input the correct num-  
bers.  
O
3D Surround  
To produce a 3D surround effect that simulates multi-  
channel audio from two stereo speakers.  
4 Press ENTER to confirm.  
1 During playback, press the ON SCREEN key on  
the remote.  
÷ Playback starts from the selected time.  
2 Press Cursor up/down (5/∞) keys on the remote  
to select the sound option.  
Sound icon  
÷ The sound option will be highlighted.  
3 Press Cursor left/right (2/3) keys on the remote  
to select "3D SUR".  
÷ To turn off the 3D Surround effect, select "Normal".  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music disc playback features  
Using the TV screen to start play- To display the ID3 tag  
back  
Whenplayingafilecontaininginformationsuchastrack  
titles, you can see the information by pressing ON  
SCREEN key.  
OnceyouinsertanaudioCD, MP3orWMAdiscamenu  
appears on the TV screen.  
Press the ON SCREEN key on the remote to dis-  
play the ID3 tag.  
Audio CD menu  
MP3/WMA menu  
Song, Artist, Album, CommentandGenre displayap-  
pears on the TV screen.  
Each press the key switches the  
mode.  
Song  
(File name)  
Artist  
Genre  
Album  
Comment  
÷ If there is no information, “No ID3 Tag Info” appear on  
Press the Cursor up/down (5/∞) keys on the re-  
mote to select a track then press PLAY (3) or EN-  
TER and playback starts.  
the display.  
Random play  
The tracks of the disc are played in random order.  
During playback, press the RANDOM key on the  
remote.  
The Random Play display appears on the TV  
screen.  
Playback from desired track  
Operations  
÷ Each time you press RANDOM key on the remote,  
random play would be on and off.  
÷ By pressing ¢ key during random playback, the unit  
selects another track and resumes random playback.  
Press the numeric keys, then press PLAY (3) key.  
(Example) To select track No. 23 : 23  
To cancel random play  
1 Press the stop (7) key to stop playback.  
2 Press the RANDOM key to cancel random play-  
back.  
3D Surround  
To repeat random play (repeat play∞)  
To produce a 3D surround effect that simulates multi-  
channel audio from two stereo speakers.  
During random playback, press the REPEAT  
key on the remote.  
During playback, press the AUDIO key on the  
remote.  
Each press the key switches the mode.  
1 "TRACK"  
2 "ALL"  
3 Goes off (repeat off)  
÷ "  
3D SUR." appears on the menu screen.  
÷ To turn off the 3D Surround effect, press AUDIO key  
repeatedly until " 3D SUR." disappears from the  
menu screen.  
After all tracks of a disc have been played in random  
order, playback will stop.  
NNoottee  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo files playback features (JPEG files only)  
£
To start playback  
Slide show  
Once you insert an audio JPEG disc a menu appears on  
The Slide show function can be used to switch photo  
images automatically from one file to the next.  
There are 3 Slide speed options.  
the TV screen.  
1Press the Cursor up/down (5/∞) keys on the re-  
mote to select a folder then press ENTER key.  
1 Insert a disc and close the tray.  
2A list of files in the folder appears. If you are in a  
file list and want to return to the previous Folder  
list, use the Cursor up/down (5/∞) keys on the  
2 Press Cursor (2/3/5/∞) keys on the remote to  
highlight the speed icon (  
).  
remote to highlight  
and press ENTER key.  
Go to step 4 if the slide speed is not to be changed.  
3Select desired file, then press PLAY or ENTER key.  
Preview window  
3 Press Cursor left/right (2/3) keys on the re-  
mote to select the option you want to use then  
press ENTER key.  
Zoom function  
>>> : Fast  
>> : Normal  
Use zoom to enlarge the photo image.  
>
: Slow  
1 During playback, press the ZOOM key on the  
remote.  
4 Press Cursor up/down (5/∞) keys on the remote  
Each press the key switches the mode.  
to select the  
key.  
icon and then press the ENTER  
1 200% size  
2 400% size  
3 900% size  
4 normal size  
O
÷ Playback starts.  
The square frame appears briefly in the right bottom of the  
picture.  
2 Press the Cursor (2/3/5/∞) keys on the  
remote to move through the zoomed picture.  
÷ To resume normal playback, press ZOOM or CLEAR key  
repeatedly.  
To rotate picture  
Press the Cursor up/down (5/∞)  
keys on the remote to rotate the  
picture clockwise or counter  
clockwise.  
To hide the menu bar  
Press the RETURN (  
the menu bar.  
) key on the remote to hide  
Switching between display and  
no display is done each time the  
RETURN key is pressed.  
Hide  
Menu bar  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the  
table below to see if the problem can be corrected before seeking help from your dealer or service representative.  
Operation to reset  
The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power  
cord is unplugged while power is ON or due to an external factor.  
In this case, switch off the power, wait for several seconds, and then switch the power on again.  
DVD player unit  
Symptom  
Cause  
Remedy  
÷
÷
There is no disc in the player.  
There are no signals recorded on the side of  
the disc being played.  
÷
÷
Load a disc and press the 3key.  
Turn the disc over and properly place it on  
the disc tray.  
Playback does not start when the 3key is  
pressed.  
÷
÷
The TV is not turned on.  
The connection cords are not properly con-  
nected.  
÷
÷
Turn on the TV.  
Properly reconnect the connection cords.  
@#  
Playback starts but no image/sound is seen  
heard.  
÷
The picture is slightly disrupted during fast  
forward and fast reverse operations.  
÷
This is not a malfunction.  
The picture is disrupted when the image is  
fast forwarded or fast reversed.  
÷
÷
÷
The audio output cords are not properly con-  
nected.  
The volume control of the TV or amplifier is  
not adjusted properly.  
The player is in a special playback mode.  
÷
÷
÷
Properly connect the audio cords.  
@#  
Set the sound volume to an appropriate  
level.  
Press the 3 (play) key to resume normal  
playback mode.  
No sound is heard.  
÷
Setting to progressive mode has been done  
for a TV not compatible with progressive  
mode.  
÷
Return to interlaced mode is made when  
the 7 (stop) key is pressed for at least 5  
seconds.  
No picture is displayed.  
÷
÷
A nearby device is generating noise.  
÷
÷
Separate this unit as far as possible from  
the device you think is generating the  
noise.  
Refer to the "Disc handling precautions"  
section and wipe dirt from the disc. !  
Use a new disc.  
The picture does not look good or the pic-  
ture/sound quality is poor.  
The disc is dirty.  
÷
÷
The disc is damaged.  
There is condensation on the optical lens.  
÷
÷
Refer to the "Caution on condensation" sec-  
tion and evaporate the condensation.  
!
÷
Time is required for the unit to detect the  
disc type and size and for the rotation of the  
motor to stabilize. This is not a malfunction.  
÷
Approximately 10 to 20 seconds are re-  
quired for a disc to start playing, although  
the time differs depending on the disc.  
It takes a while for the disc to start playing.  
The tray opens automatically.  
÷
÷
The disc is not placed horizontally.  
÷
÷
Properly place the disc on the tray.  
Knowledge  
The video format of the disc being played  
does not match that of the connected TV  
monitor.  
Refer to the "Video formats" section ,and  
use a disc with the appropriate video for-  
mat for your TV or a TV with the appropriate  
The top and bottom of the screen cannot be  
seen, or the screen becomes black-and-  
white.  
video format for the disc.  
0
÷
÷
÷
The DVD disc being played does not contain  
the recording of subtitles.  
÷
÷
÷
The subtitle cannot be displayed when the  
DVD disc being played does not contain  
the recording of subtitles.  
The subtitle is not displayed.  
The subtitle mode is set to off.  
Press the SUBTITLE key to switch on the  
subtitle mode.  
ª
The DVD disc being played does not contain  
the recording of more than one audio (or sub-  
title) language.  
The voice (or subtitle) language cannot be  
changed when the DVD disc being played  
does not contain the recording of more  
than one voice (or subtitle) language.  
The voice (or subtitle) language cannot be  
changed.  
÷
÷
The DVD disc being played does not contain  
the recording of more than one angle.  
÷
÷
The viewing angle cannot be changed  
when the DVD disc being played does not  
contain the recording of more than one  
angle.  
More than one viewing angle may be re-  
corded only in limited sections in a disc.  
The viewing angle cannot be changed.  
You are attempting to switch the angle in a  
DVD section where more than one angle is  
not recorded.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
DVD player unit (Continued)  
Symptom  
Cause  
Remedy  
÷
÷
A viewing restriction (Rating) has been set  
for the disc.  
÷
÷
Check the viewing restriction level (Rating)  
Playback will not start even after a title is se-  
lected.  
setting.  
*
You have forgotten the password.  
Set the initial setup to the factory setup  
with the following procedure.  
The parental level cannot be changed.  
1 Press the SETUP key on the remote to  
display the Setup menu.  
2 Input the 6-digits number "210499" and  
the password is cleared.  
(
3 Enter a new code.  
÷
The DVD disc being played does not contain  
the recording of the selected voice or subtitle  
language.  
÷
Use a DVD disc containing the recording of  
the selected voice or subtitle language.  
Thevoiceorsubtitlelanguageselectedinthe  
initial setting is not played.  
÷
÷
The initial playback language is specified by  
the DVD disc.  
The DVD specifications provide for selection  
at the menu screen.  
÷
÷
Press SUBTITLE or the AUDIO key on the  
•ª  
remote and select the language.  
Select at the menu screen of the disc.  
÷
÷
The menu language function (MENU) is not  
set to desired language.  
÷
÷
Select disc menu language.  
&
Menu screen messages are not shown in the  
desired language.  
The VCD disc being played is not compatible  
with P.B.C.  
Menu playback is available only with VCD  
discs recorded with P.B.C.  
A VCD cannot be played using menus.  
Remote control unit  
Symptom  
Cause  
Remedy  
Remote control operation is not possible.  
÷
÷
Batteries are exhausted.  
÷
÷
Replace with new batteries.  
Operate the unit inside the remote control-  
lable range.  
The remote control is too far away from the  
system, the controlling angle is deviated or  
there is an obstacle in between.  
Inhibition icon  
Symptom  
Cause  
Remedy  
÷
Playback is restricted intentionally by the  
software producer.  
÷
The operation is inhibited. Please try an-  
other operation.  
The inhibition icon is displayed  
and remote control is not pos-  
sible.  
K
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
Manufactured under license from Dolby Laboratories.  
"Dolby"andthedouble-DsymbolaretrademarksofDolby  
Laboratories.  
This product incorporates copyright protection technol-  
ogy that is protected by U.S. patents and other intellec-  
tualpropertyrights.Useofthiscopyrightprotectiontech-  
nology must be authorized by Macrovision, and is in-  
tended for home and other limited viewing uses only  
unlessotherwiseauthorizedbyMacrovision.Reverseen-  
gineering or disassembly is prohibited.  
"DTS" and "DTS Digital Out" are reg-  
istered trademarks of Digital Theater  
Systems, Inc.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY COMPAT-  
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-  
FACTSTOBEDISPLAYEDINTHEPICTURE.INCASEOF  
525 OR 625 PROGRESSIVE SCAN PICTURE PROB-  
LEMS,ITISRECOMMENDEDTHATTHEUSERSWITCH  
THE CONNECTION TO THE "STANDARD DEFINITION"  
OUTPUT.IFTHEREAREQUESTIONSREGARDINGOUR  
TVSETCOMPATIBILITYWITHTHISMODEL525PAND  
625P DVD PLAYER, PLEASE CONTACT OUR CUS-  
TOMER SERVICE CENTER.  
DivX, DivX Certified, and associated logos are trademarks  
of DivX, Inc. and are used under license.  
Knowledge  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
[Type]  
[Video Section]  
System ................................................... DVD video player  
Signal read system ......................... Semiconductor laser  
Video output format  
Europe and Australia .................................. NTSC/PAL  
Except for Europe and Australia........................ NTSC  
Video compression  
[D/A Conversion Section]  
D/A conversion ........................................................ 24 Bit  
Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz)  
......................... 4 fs (Sampling frequency; 96 kHz)  
DVD ................................................................... MPEG-2  
Composite video output level .................... 1 Vp-p (75 Ω)  
S-video output level (Except for Europe)  
(Y-signal) ................................................. 1 Vp-p (75 Ω)  
(C-signal)  
[Audio section]  
Frequency response  
NTSC ........................................... 0.286 Vp-p (75 Ω)  
PAL .............................................. 0.300 Vp-p (75 Ω)  
Component Video output level  
(Y-signal) ................................................. 1 Vp-p (75 Ω)  
(CB-signal)............................................. 0.7 Vp-p (75 Ω)  
(CR-signal)............................................. 0.7 Vp-p (75 Ω)  
RGB output level (SCART) (For Europe) .... 0.7 Vp-p (75 Ω)  
Horizontal resolution........................ More than 500 lines  
Video signal to noise ratio .................... More than 68 dB  
Sampling frequency ; 44.1 kHz ............ 4 Hz ~ 20 kHz  
Sampling frequency ; 48 kHz ............... 4 Hz ~ 22 kHz  
Sampling frequency ; 96 kHz ............... 4 Hz ~ 44 kHz  
Signal to noise ratio ............................ More than 100 dB  
Dynamic range ....................................... More than 92 dB  
Total harmonic distortion ...... Less than 0.008 % (1 kHz)  
Channel separation ................... More than 95 dB (1 kHz)  
Wow and flutter ........................ Below measurable limit  
Analog output level/impedance .................... 2 V / 330 Ω  
Digital output level/impedance  
[General]  
COAXIAL.............................................. 0.5 Vp-p / 75 Ω  
Power consumption .................................................... 8 W  
Dimensions ................................ W : 440 mm (17-5/16”)  
.....................................................H : 41 mm (1-5/8”)  
.....................................................D : 249 mm (9-13/16”)  
Weight (net) ................................................ 1.9 kg (4.2 lb)  
KENWOODfollowsapolicyofcontinuousadvancementsindevelopment.Forthisreasonspecificationsmay  
be changed without notice.  
NNootteess  
÷ Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).  
K
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model  
Serial Number  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jasco Universal Remote RM24950 User Manual
Jet Tools Kitchen Utensil JMS 12SCMS User Manual
JVC Digital Camera GC A70 User Manual
JVC Flat Panel Television GGT0211 002A H User Manual
JVC Home Theater Screen TM 1600SU User Manual
JVC MiniDisc Player LVT0122 001A User Manual
JVC MP3 Player XL PG7 User Manual
JVC Stereo System CA MD70R User Manual
KitchenAid Clothes Dryer KEYS700E User Manual
Kodak Scanner 3000DSV E User Manual