CD-RECEIVER
KDC-Z838
KDC-Z737
INSTRUCTION MANUAL
© B64-2178-10 (MV)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
IMPORTANT INFORMATION
About the disc changer/CD player to
be connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
When you connect a model with no "O-N"
switch, the converter cord CA-DS100 available
as an option may be required. For details,
consult your Kenwood dealer.
A disc changer doesn't work when it is
connected without using these options.
If a model with no "O-N" switch is connected,
some unavailable functions and information
that cannot be displayed are generated.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
2WARNING
2CAUTION
To prevent injury or fire, take the
following precautions:
• Insert the unit all the way in until it is fully
locked in place. Otherwise it may fall out of
place when jolted.
• When extending the ignition, battery, or
ground wires, make sure to use automotive-
grade wires or other wires with a 0.75mm
(AWG18) or more to prevent wire
deterioration and damage to the wire
coating.
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
2
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
You can damage both your unit and the CD
changer if you connect them incorrectly.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
• To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
• Do not place any object between the
faceplate and the unit.
• Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
• Do not apply excessive force to the moving
faceplate. Doing so will cause damage or
malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so will
cause damage or breakdown.
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It
means that the unit is utilizing laser beams
that are of a weaker class. There is no
danger of hazardous radiation outside the
unit.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter
into the unit, the adapter might separate from
the CD and damage the unit.
— 3 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Lens Fogging
NOTE
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit fails to operate properly, press the
Reset button. The unit returns to factory
settings when the Reset button is pressed.
If the unit still fails to operate properly after
the Reset button has been pressed, contact
your local KENWOOD dealer for assistance.
• Press the reset button if the disc auto
changer fails to operate correctly. Normal
operation should be restored.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
Reset button
• We recommend the use of the Security
Code function (see p. 25) to prevent theft.
Cleaning the CD Slot
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
About CDs
Handling CDs
• Don’t touch the recording surface of the CD.
CD cleaning
Clean from the center of the disc and move
outward.
Removing CDs
When removing CDs from this unit pull them
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
out horizontally.
CDs that can’t be used
• CDs that aren’t round can’t be used.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
• CDs with coloring on the recording surface
or that are dirty can’t be used.
• Don’t use CDs without disc mark
.
Burrs
• A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
Burrs
CD storage
• Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
CD accessories
Don’t use disc type accessories.
• Store CDs in their cases.
— 5 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MP3 (KDC-Z838)
This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note,
however, that the MP3 recording media and formats acceptable
are limited. When writing MP3, pay attention to the following
restrictions.
Entering ID3 tag
The Displayable ID3 tag is ID3
version 1.x.
For the character code, refer to the
List of Codes.
Acceptable media
The MP3 recording media acceptable to this unit are CD-ROM, CD-R,
and CD-RW.
Entering file and folder names
When using CD-RW, do full format not quick format to prevent
malfunction.
The code list characters are the only
file names and folder names that can
be entered and displayed.
Acceptable medium formats
If you use any other character for
The following formats are available for the media used in this unit. The
maximum number of characters used for file name including the
delimiter (".") and three-character extension are indicated in
parentheses.
entry, the file and folder names are not displayed correctly. They may
neither be displayed correctly depending on the CD writer used.
The unit recognizes and plays only those MP3 which have the MP3
extension (.MP3).
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 characters)
• Romeo (128 characters)
A file with a name entered with characters not on the code list
may not play correctly.
Up to 200 characters can be displayed in the long file name format.
For a list of available characters, see the instruction manual of the
writing software and the section Entering file and folder names below.
The media reproducible on this unit has the following limitations:
• Maximum number of directory levels: 8
• Maximum number of files per folder: 255
• Maximum number of characters for folder name: 64
• Maximum number of folders: 50
Writing files into a medium
When a medium containing MP3 data is loaded, the unit checks all the
data on the medium. If the medium contains a lot of folders or non-
MP3 files, therefore, it takes a long time until the unit starts playing
MP3.
In addition, it may take time for the unit to move to the next MP3 file
or a Track Search or Album Search may not be performed smoothly.
Loading such a medium may produce loud noise to damage the speakers.
• Do no attempt to play a medium containing a non-MP3 file with the
MP3 extension.
The unit mistakes non-MP3 files for MP3 data as long as they have
the MP3 extension.
MP3 written in the formats other than the above may not be
successfully played and their file names or folder names are not
properly displayed.
Settings for your MP3 encoder and CD writer
When you use your CD writer to record MP3 up to the maximum disc
capacity, disable additional writing. For recording on an empty disc up
to the maximum capacity at once, check Disc at Once.
• Do not attempt to play a medium containing non MP3.
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 playing order
When a Track Search is executed with file ¡$ being played ...
When selected for play, Album Search, Track Search, or for Album
Select, files and folders are accessed in the order in which they were
written by the CD writer.
Operation of the button
¢ Button
Current
file number
4 Button
Beginning of file
Because of this, the order in which they are expected to be played
may not match the order in which they are actually played. You may be
able to set the order in which MP3 are to be played by writing them
onto a medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99", depending on your CD
writer.
When an Album Search is executed with file ¡$ being played ...
Operation of the button
Current
folder number
AM Button
FM Button
For example, a medium with the following folder/ file hierarchy is
subject to Album Search, Track Search, or Album Select as shown
below.
Example of a medium's folder/file hierarchy
When Album Select is selected with file ¡$ being played to move
from folder to folder ...
Operation of the button
Current
folder number
4 Button
¢ Button
AM Button
FM Button
Folder
File
Root
Level 1
Level 3
Level 2
Level 4
— 7 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
Release button
Power
¢
S.A
FM
u
Turning ON the Power
Press the [SRC] button.
When the power is ON, the <Security Code> (page 25) is displayed
as "CODE ON" or "CODE OFF".
Turning OFF the Power
Press the [SRC] button for at least 1 second.
d
4
ATT/
LOUD
AM/
NF
Selecting the Source
Press the [SRC] button.
Source required
SRC
Q/
AUD
DISP/
NAME.S
Display
Tuner
CD
"TUNER"
"CD"
External disc
Auxiliary input
"CD 2"/"DISC"
"AUX"
Standby (Illumination only mode)
"ALL OFF"
IN
SQ
ATT
ST
LOUD
SEC
Volume
LOUD indicator
ATT indicator
Increasing Volume
Press the [u] button.
Decreasing Volume
Press the [d] button.
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment Item
Display
Range
Attenuator
Turning the volume down quickly.
Bass Center Frequency "Bass FRQ"
Bass level
Bass Q Factor
Bass Extend
Middle Center
Frequency
60/70/80/100 or 150 Hz
–8 — +8
1.00/1.25/1.50/2.00
ON/OFF
"Bass"
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it’s ON, the "ATT" indicator blinks.
"Bass Q"
"Bass EXT"
"MID FRQ"
0.5/1.0/1.5/2.0 kHz
Middle level
"MID"
–8 — +8
Middle Q Factor
Treble Center Frequency"TRE FRQ"
Treble level
Balance
Fader
"Middle Q"
1.0/2.0
10.0/12.5/15.0/17.5 kHz
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
–15 — +15
Through/40/60/80/100/
120/150/180/220 Hz
Loudness
"TRE"
"Balance"
"Fader"
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
Non-Fading level*
Front High Pass Filter* "HPF Front"
"NF Level"
When it’s ON, "LOUD" indicator is ON.
Rear High Pass Filter* "HPF Rear"
Through/40/60/80/100/
120/150/180/220 Hz
Non-Fading
Low Pass Filter*
"LPF NF"
50/80/120/Through Hz
Audio Control
Non-Fading Phase*
"NF Phase"
Normal (0°)/
1 Select the source for adjustment
Press the [SRC] button.
Reverse (180°)
Volume offset
"Volume Offset" –8 —
0
2 Enter Audio Control mode
Press the [AUD] button for at least 1 second.
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor
1.00/1.25/1.50
2.00
Bass Center Frequency
60/70/80/100
60/70/80/150
3 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
• When the bass extend is set to ON, low frequency response is
extended by 20%.
• Volume offset: Each source's volume can be set as a difference
from the basic volume.
• * :Function of the KDC-Z838
4 Adjust the Audio item
Press the [4] or [¢] button.
5 Exit Audio Control mode
Press the [AUD] button.
— 9 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
3 Select the Speaker type
System Q
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
You can recall the best sound setting preset for different types of
the music.
Speaker type
Display
1 Select the source to set
Press the [SRC] button.
OFF
"OFF"
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
"5/4 inch"
2 Select the Sound type
"6 9/6 inch"
Press the [Q] button.
*
"O.E.M."
Each time the button is pressed the sound setting switches.
Sound setting
Display
4 Exit Speaker Setting mode
Press the [Q] button.
Flat
"FLAT"
User memory
Rock
Pops
"User Preset"
"ROCK"
"POPS"
Function of the KDC-Z838
Easy
"EASY"
Speaker & Woofer Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker and woofer type.
Top 40
Jazz
"TOP 40"
"JAZZ"
• User memory: The values set on the <Audio Control> (page 9).
• Each setting value is changed on the <Speaker & Woofer Setting>
(page 10) or <Speaker Setting> (page 10). First, select the Speaker
and Woofer type with the <Speaker & Woofer Setting> or
<Speaker Setting>.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker & Woofer Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
Function of the KDC-Z737
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
3 Select the Setting mode
Press the [FM] or [AM] button.
1 Enter Standby
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
Press the [SRC] button.
Select the "ALL OFF" display.
4 Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
2 Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
In Speaker setting mode
• The display of each part can be changed.
- Switching Upper and Lower Part Display: (page 12)
- Switching Full Screen Display: (page 11)
Speaker type
Display
OFF
"OFF"
• "Display Type C" can’t be selected in "ALL OFF".
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
"5/4 inch"
"6*9/6 inch"
"O.E.M."
In Woofer setting mode
Woofer type
Display
Switching Full Screen Display
Switching the Full screen display.
OFF
"Woofer OFF"
"12in typeA"
"10in typeA"
"12in typeB"
"10in typeB"
"12in typeC"
"10in typeC"
"8inch"
12 in. A type
10 in. A type
12 in. B type
10 in. B type
12 in. C type
10 in. C type
8 in. type
Press the [S.A] button.
Each time the button is pressed the display switches as shown
below.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5
12 in. D type
10 in. D type
"12in typeD"
"10in typeD"
5 Exit Speaker & Woofer Setting mode
Press the [Q] button.
Full Screen display can be selected when "Display Type C" is
selected in <Display Mode Switching> (page 11).
Display Mode Switching
Switching the display mode.
Press the [DISP] button.
Each time the button is pressed the Display mode switches as
shown below.
Display mode
Display
Upper and lower division display type
"Display Type A"
Type that mainly uses the display upper part "Display Type B"
Full screen display type "Display Type C"
— 11 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
Switch the Lower part display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
Switching the Standby Display
Switching the information displayed in Standby.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
4 Exit Display Control mode
Press the [S.A] button.
2 Switch the display
Press the [S.A] button.
Each time the button is pressed the display switches as shown
below.
Information
• The same information can't be displayed on the Upper part
display and lower part display.
• The Upper part display and Lower part display switching can be
selected when "Display Type A" is selected in <Display Mode
Switching> (page 11).
Display
Demonstration
Date & Clock
• When "Display Type B" is selected the Lower part display
content is clock ON or OFF.
Standby display
"ALL OFF"
• Demonstration can be selected when "Display Type A" is selected
in <Display Mode Switching> (page 11).
• Only "Display Type A" and "Display Type B" can be selected in "ALL
OFF".
In Tuner source
Upper Part Display
Information
Display
Band display & Station name
Band display & Frequency
"Band+ch+SNPS"
"Band+ch+FREQ"
Switching Upper and Lower Part Display
Switching the upper and lower part display.
Lower Part Display
Information
Display
1 Select the Display Type
Press the [DISP] button.
Spectrum Analyzer & Graphic
Spectrum Analyzer & Clock
Spectrum Analyzer
Date
"S/ANA+GRAPHIC"
"S/ANA+CLOCK"
"S/ANA"
"DATE"
"CLOCK+GRAPHIC"
2 Enter Display Control mode
Press the [S.A] button.
"Display Control Mode On" is displayed.
Clock & Graphic
3 Switch the Upper part display
Press the [FM] or [AM] button.
For Disc name registration refer to <Station/Disc Naming
(SNPS/DNPS)> (page 14).
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Part Display
Information
In CD/ External disc source
Display
Upper Part Display
Information
Spectrum Analyzer & Graphic
Spectrum Analyzer & Clock
Spectrum Analyzer
Album name & Artist name
Song title & Artist name
File name
Folder name
Disc name
Date
Clock & Graphic
"S/ANA+GRAPHIC"
"S/ANA+CLOCK"
"S/ANA"
"ALBUM/ARTIST"
"TITLE/ARTIST"
"FILE NAME"
"FOLDER NAME"
"DNPS"
Display
Track Time
Disc name
Disc title
"P-Time"
"DNPS"
"DISC-TITLE"
"TRACK-TITLE"
Track title
Lower Part Display
Information
Display
"DATE"
"CLOCK+GRAPHIC"
Spectrum Analyzer & Graphic
Spectrum Analyzer & Clock
Spectrum Analyzer
Track title
"S/ANA+GRAPHIC"
"S/ANA+CLOCK"
"S/ANA"
"TRACK-TITLE"
"DISC-TITLE"
For Disc name registration refer to <Station/Disc Naming
(SNPS/DNPS)> (page 14).
Disc title
Disc name (CD player / CDchenger) "DNPS"
Date
Clock & Graphic
"DATE"
"CLOCK+GRAPHIC"
In Auxiliary input source
Lower Part Display
Information
For Disc name registration refer to <Station/Disc Naming
(SNPS/DNPS)> (page 14).
Display
Spectrum Analyzer & Graphic
Spectrum Analyzer & Clock
Spectrum Analyzer
Date
"S/ANA+GRAPHIC"
"S/ANA+CLOCK"
"S/ANA"
Function of the KDC-Z838
"DATE"
In MP3 source
Clock & Graphic
"CLOCK+GRAPHIC"
Upper Part Display
Information
The Auxiliary input name is always displayed on the Upper part
display.
Display
Track Time
"P-Time"
Disc name
"DNPS"
Folder name
File name
Song title & Artist name
Album name & Artist name
"FOLDER NAME"
"FILE NAME"
"TITLE/ARTIST"
"ALBUM/ARTIST"
— 13 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
6 Repeat steps 3 through 5 and enter the name.
Station/Disc Naming (SNPS/DNPS)
7 Exit name set mode
Attaching a title to a Station or CD.
Press the [NAME.S] button.
1 Receive/play the station/disc you want to attach a title to
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
• A title can't be attached to a MD.
• Disc Naming can't be done during CD text display.
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
2 Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"Name Set" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
4 Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character
Button
#Times pressed
"D"
"A"
"N"
"C"
"E"
[#3]
[#2]
[#6]
[#2]
[#3]
1
1
2
3
2
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of the KDC-Z838
Auxiliary Input Display Setting
Selecting the display when this device is switched to Auxiliary
input source.
Dual Zone System
Makes the sound different for the front channel and rear
channel.
1 channel is the unit's internal source, the other channel is the
Auxiliary input source sound.
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
Press the [S.A] button for at least 1 second.
Each time the button is pressed for at least 1 second Dual Zone
System switches ON or OFF.
2 Enter Auxiliary input display setting mode
Press the [DISP] button for at least 2 seconds.
The presently selected AUX Name is blinks.
When it’s ON, "Zone 2 ON" is displayed.
• When the Dual Zone System is ON, there is no Auxiliary input
source channel audio control or other effect.
• When the Dual Zone System is being used the internal source
channel can't be used with an External disc source.
• When you set the Dual zone system to ON while the non-fading
preout is switched ON, the sound of the non-fading preout isn’t
output.
• The Dual Zone System can be used with the optional Auxiliary
input sources shown below.
- KCA-S210A
3 Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX"
• "TV"
• "VCP"
• "GAME"
• "PORTABLE"
• "DVD"
- CA-C1AX
- CD changer with an Auxiliary input function installed.
• This function can be used in Auxiliary input source.
• The front channel and rear channel can be set to be the internal
source or the Auxiliary input source. Refer to the <Dual Zone
System Setting> (page 27).
4 Exit Auxiliary input display setting mode
Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
Function of the KDC-Z838
Non-fading Output
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, "NF ON" is displayed.
— 15 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to the front and
remove it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the depression on the
faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner features
Tuning Mode
Choose the tuning mode.
¢
FM
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode
Display
Operation
Auto seek
Preset station
seek
"Auto 1"
"Auto 2"
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Manual
"Manual"
Normal manual tuning control.
4
AM
#1 #6
SRC
AUTO
MENU
Tuning
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Preset station number
Frequency display
Band display
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
IN
SQ
ATT
ST
LOUD
SEC
3 Tune up or down band
Press the [4] or [¢] button.
ST indicator
• The sound will be temporarily muted while the faceplate is
moving.
• During reception of stereo stations the "ST" indicator is ON.
— 17 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner features
Direct Access Tuning (Function of remote)
Auto Memory Entry
Entering the frequency and tuning.
Putting a station with good reception in the memory
automatically.
1 Select the band
Press the [FM] or [AM] button.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "A-Memory" display.
Desired frequency
Press button
92.1 MHz (FM)
810 kHz (AM)
[#0], [#9], [#2], [#1]
[#0], [#8], [#1], [#0]
4 Open Auto Memory Entry
Press the [4] or [¢] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Preset Tuning
Station Preset Memory
Calling up the stations in the memory.
Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
1 Select the band
Press the [FM] or [AM] button.
2 Call up the station
Press the [#1] — [#6] button.
2 Select the frequency to put in the memory
Press the [4] or [¢] button.
3 Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
SNPP (Station Name Preset Play)
(Function of Remote)
Display SNPS and Select the station.
— 18 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/External disc control features
1 Enter SNPP mode
Press the [DNPP] button on the remote.
When "SNPP" is displayed, SNPS displays the FM1, FM2, FM3
and AM bands in order.
¢
FM
If the station has no name, the frequency is displayed instead.
Changing the display order
Press the [4] or [¢] button.
Changing the displayed band
Press the [FM] or [AM] button.
RDM/
#3
REP
M.RDM
2 If the station you want is displayed
Press the [OK] button on the remote.
The displayed SNPS station is received.
AM
DISP
4
SCAN
F.SEL
SRC
Canceling the SNPP mode
Press the [DNPP] button on the remote.
Frequency Step Setting
Changing the tuning frequency step.
Track time
Disc number
Track number
The original setting is FM band 50 kHz, and AM band 9 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
IN
SQ
ATT
ST
LOUD
SEC
2 Switch the frequency step
Disc title/ Track title
File name/ Folder name/ MP3 text
While pressing the [#1] and [#5] button, press the [SRC]
IN indicator
button.
The frequency step changes to FM band 200 kHz, and AM band
10 kHz.
• When the same operation is repeated, it returns to the original
setting.
• When the frequency step is switched, the frequencies in the
memory are deleted.
— 19 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/External disc control features
Playing CD & MP3
When there is no disc inserted
1 Drop open the faceplate
Press the Release button.
2 Insert a disc.
3 Press the faceplate on the right side, and return it to its
former position.
3 Press the faceplate on the right side, and return it to its
• When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an appropriate
action, then operate the unit.
• Do not use the unit with the faceplate in the open condition. If it's
used in the open position dust can enter the inside part and cause
damage.
former position.
3 in. (8cm) disc can't be played. Using an adapter and inserting them
into this unit can cause damage.
The MP3 media that this unit can play are CD-ROM, CD-R, and CD-
RW.
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or
Romeo. The methods and precautions to be followed for writing
MP3 data are covered in <Notes on playing MP3> (page 6).
Check that section before creating your MP3 media.
• The model that can play MP3 is shown below.
KDC-Z838
• When a disc is inserted, the "IN" indicator is ON.
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and plays.
Eject the disc
1 Drop open the faceplate
Press the Release button.
2 Eject the disc
Press the [0] button.
— 20 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing External Disc
Album Search
Playing discs set in the optional accessory disc player connected
to this unit.
Selecting the disc set in the Disc changer or the folder recorded
on the MP3 media.
Press the [SRC] button.
Press the [FM] or [AM] button.
Select the display for the disc player you want.
Display examples:
Display
Disc player
"CD 2"
"DISC"
CD player
CD changer / MD changer
Direct Track Search (Function of remote)
Doing Track Search by entering the track number.
Pause and play
1 Enter the track number
Press the number buttons on the remote.
Press the [38] button.
Each time the button is pressed it pauses and plays.
2 Do Track Search
The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
Press the [4] or [¢] button.
Canceling Direct Track Search
Press the [38] button.
Fast Forwarding and Reversing
Fast Forwarding
Direct Album Search
Hold down on the [¢] button.
Release your finger to play the disc at that point.
(Function of disc changers with remote)
Doing Disc Search by entering the disc number.
Reversing
Hold down on the [4] button.
Release your finger to play the disc at that point.
1 Enter the disc number
Press the number buttons on the remote.
2 Do Album Search
Press the [DISC+] or [DISC–] button.
Canceling Direct Album Search
Track Search
Searching for a song on the disc or in the MP3 folder.
Press the [4] or [¢] button.
Press the [38] button.
— 21 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/External disc control features
Track/Album Repeat
Magazine Random Play
(Function of disc changer)
Play the songs on all the discs in the disc changer in random
order.
Replaying the song, disc in the Disc changer or MP3 folder
you're listening to.
Press the [REP] button.
Each time the button is pressed the Repeat Play switches as
shown below.
Press the [M.RDM] button.
Each time the button is pressed the Magazine Random Play turns
ON or OFF.
Repeat play
Display
When it's ON, "M.Random ON" is displayed.
Track Repeat (In CD/MD)
(In MP3)
Album Repeat (In Disc Changer) "Disc Repeat ON"
(In MP3 media) "Folder Repeat ON"
"Track Repeat ON"/"Repeat ON"
"File Repeat ON"
When the [¢] button is pressed, the next song select starts.
OFF
"Repeat OFF"
Function of the KDC-Z838
Album Select (Function of MP3)
Quickly selecting the folder you want to listen to.
Track Scan
1 Enter Album Select mode
Press the [F.SEL] button.
"Select Mode" is displayed.
Playing the first part of each song on the disc or MP3 folder you
are listening to and searching for the song you want to listen to.
During Select mode the folder information is displayed as shown
below.
1 Start Track Scan
Press the [SCAN] button.
"Scan ON" is displayed.
Folder name display
2 Release it when the song you want to listen to is played
Press the [SCAN] button.
IN
SQ
ATT
ST
LOUD
SEC
Random Play
Folder number display
Play all the songs on the disc or MP3 folder in random order.
2 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and with the [AM]
button 1 level up.
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
When it's ON, "Random ON" is displayed.
When the [¢] button is pressed, the next song select starts.
— 22 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous folder, and with
the [¢] button to the next folder.
DNPP (Disc Name Preset Play)
(Function of disc changers with remote)
Selecting the CD displayed in the DNPS of the CDs set in the
Disc changer.
Returning to the top level
Press the [#3] button.
1 Enter DNPP mode
Press the [DNPP] button on the remote.
When "DNPP" is displayed the DNPS display in order.
3 Decide the folder to play
Press the [38] button.
The Album Select mode releases, and the MP3 in the folder
being displayed is played.
Forward / Reverse display
Press the [DISC–] or [DISC+] button.
The methods for moving to other folders in the album select mode
are different from those in the album search mode.
See <Notes on playing MP3> (page 6) for details.
2 When the disc you want is displayed
Press the [OK] button on the remote.
The disc being displayed is played.
Canceling the Album Select mode
Canceling the DNPP mode
Press the [F.SEL] button.
Press the [DNPP] button on the remote.
Text/Title Scroll
Scrolling the displayed CD text, MP3 text, or MD title.
Press the [DISP] button for at least 1 second.
— 23 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu system
Menu System
Setting during operation beep sound etc. functions.
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
¢
FM
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"Beep" display.
4
AM
SRC
3 Set the menu item
Press the [4] or [¢] button.
MENU
Example: When "Beep" is selected, each time the button is
pressed it switches "Beep ON" or "Beep OFF". Select 1
of them as the setting.
You can continue by returning to step 2 and setting other items.
4 Exit Menu mode
Press the [MENU] button.
Menu display
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable (<Manual Clock
Adjustment>etc.) are entered step by step.
IN
SQ
ATT
ST
LOUD
SEC
— 24 —
Download from Www.Somanuals.com. All Manuals Search And Download.
"APPROVED" is displayed.
The unit can be used.
Security Code
Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
If an incorrect code is input, "Waiting" is displayed, and the input
prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is displayed, and
input can be done.
When the Security Code function is activated it can't be released.
Note, your Security Code is the 4 digit number entered in your "Car
Audio Passport" in this package.
Number of times
the incorrect code was input
Input prohibited time
1 Enter Standby
1
2
3
4
—
Press the [SRC] button.
Select the "ALL OFF" display.
5 minutes
1 hour
24 hours
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
3 Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
Display
Setting
4 Select the digits to enter
Press the [4] or [¢] button.
5 Select the Security Code numbers
Press the [FM] or [AM] button.
"Beep ON"
"Beep OFF"
Beep is heard.
Beep canceled.
6 Repeat steps 4 and 5, and complete the Security Code.
Manual Clock Adjustment
7 Confirm the Security Code
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
Press the [¢] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
8 Do the step 4 through 7 operation, and reenter the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
2 Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
If you enter a Code different from your Security Code, you have to
start over from step 4.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
Press the Reset button and when it's removed from the
battery power source
1 Turn the power ON.
2 Do the step 4 through 7 step operation, and reenter the
security code.
4 Exit Clock adjustment mode
Press the [MENU] button.
— 25 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu system
Date Adjustment
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
1 Select Date Adjust mode
Press the [FM] or [AM] button.
Select the "Date Adjust" display.
Display
Setting
"DSI ON"
"DSI OFF"
LED flashes.
LED OFF.
2 Enter Date Adjust mode
Press the [4] or [¢] button for at least 1 second.
The date display blinks.
3 Selecting the item (day, month, or year) to adjust
Press the [4] or [¢] button.
The items that are blinking are items that can be adjusted.
Selectable Illumination
4 Adjust each item
Selecting the button illumination color as green or red.
Press the [FM] or [AM] button.
Display
Setting
5 Repeat step 3 and 4 operation and adjust the date.
"Button Green"
"Button Red"
The illumination color is green.
The illumination color is red.
6 Exit Date adjustment mode
Press the [MENU] button.
Font Color Select
Date Mode
Selecting the display font color.
Setting the date format.
1 Select Font Color Select Mode
Press the [FM] or [AM] button.
Select the "Font Col Setting" display.
1 Select Date Mode
Press the [FM] or [AM] button.
Select the "Date Mode" display.
2 Select the color
Press the [4] or [¢] button.
2 Select the date format
Press the [4] or [¢] button.
— 26 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of the KDC-Z838
Dimmer
Dual Zone System Setting <In Standby mode>
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
<When the Dual Zone System is ON >
Setting the Front channel and Rear channel sound when the
Dual Zone System is ON.
Display
Setting
"Dimmer ON"
"Dimmer OFF"
The display dims.
The display doesn't dim.
Display
Setting
"Zone 2 Rear" The front is this unit's internal source, and the
rear is Auxiliary input sound.
"Zone 2 Front" The rear is this unit's internal source, and the
front is Auxiliary input sound.
System Q
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the
main unit.
Display
Setting
Display
Setting
"System Q ON"
"System Q OFF"
The System Q factors are displayed.
The System Q factors aren't displayed.
"AMP Bass Flat"
"AMP Bass +6"
"AMP Bass +12"
"AMP Bass +18"
Bass boost level is flat.
Bass boost level is low (+6dB).
Bass boost level is mid (+12dB).
Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
Built-in Amp Mute Setting <In Standby mode>
• For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier is attached that can only be set to +12, even if
”AMP Bass +18” is selected it won’t operate correctly.
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display
Setting
"AMP Mute OFF"
"AMP Mute ON"
The built-in amplifier activates.
The built-in amplifier deactivates.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display
Setting
"AMP Freq Normal"
"AMP Freq Low"
Boost with the normal central frequency
Drop the normal central frequency 20%
— 27 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu system
Auto Memory Entry <In Tuner mode>
Built-in Auxiliary input Setting
For the operation method refer to <Auto Memory Entry> (page
18).
Set the Built-in Auxiliary Input function.
Display
Setting
"AUX OFF" When selecting the source there's no Auxiliary Input.
"AUX ON" When selecting the source there's Auxiliary Input.
CRSC (Clean Reception System Circuit)
<In FM reception>
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display
Setting
"CRSC ON"
"CRSC OFF"
The CRSC is ON.
The CRSC is OFF.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned ON. In such a situation,
turn it OFF.
Text Scroll
Setting the displayed text scroll.
Display
Setting
"Scroll Auto"
Repeats scroll.
"Scroll Manual"
Scrolls when the display changes.
The text scrolled is shown below.
• CD text
• Folder name/ File name/ Song title/ Artist name/ Album name
• MD title
— 28 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations of remote
Loading and Replacing the battery
Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
4/¢
FM/AM
DISC+ /DISC-
38
2WARNING
[#0] [#9]
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
DIRECT/OK
DNPP
Do not set the remote on hot places such as above the dashboard.
ATT
VOL.
SRC
Basic operations
[VOL.] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 8).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.
— 29 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations of remote
In Tuner source
[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[#0] — [#9] buttons
Press buttons [#1] — [#6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 18) mode.
[DNPP]/ [OK] button
Enters and cancels the <SNPP (Station Name Preset Play)> (page
18) mode.
In Disc source
[4]/ [¢] buttons
Doing track forward and backward.
[DISC+]/ [DISC–] buttons
Doing album forward and backward.
[38] button
Each time the button is pressed the song pauses and plays.
[DNPP]/ [OK] button
Enters and cancels the <DNPP (Disc Name Preset Play)> (page
23) mode.
[#0] — [#9] buttons
When in <Direct Track Search> (page 21) and <Direct Album
Search> (page 21), enter the track/disc number.
— 30 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
External view
External view
......... Number of items
2WARNING
......... Number of items
If you connect the ignition wire (red) and the battery wire (yellow)
to the car chassis (ground), you may cause a short circuit, that in
turn may start a fire. Always connect those wires to the power
source running through the fuse box.
1
2
3
4
5
.........4
.........4
.........2
.........1
.........2
2CAUTION
• If your car's ignition does not have an ACC position, connect the
ignition wires to a power source that can be turned on and off
with the ignition key. If you connect the ignition wire to a power
source with a constant voltage supply, as with battery wires, the
battery may die.
• If the console has a lid, make sure to install the unit so that the
faceplate will not hit the lid when closing and opening.
• If the fuse blows, first make sure the wires aren’t touching to
cause a short circuit, then replace the old fuse with one with the
same rating.
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps on
the ends of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if you
share the - wires or ground them to any metal part in the car.
• When only two speakers are being connected to the system,
connect the connectors either to both the front output terminals
or to both the rear output terminals (do not mix front and rear).
For example, if you connect the + connector of the left speaker
to a front output terminal, do not connect the - connector to a
rear output terminal
The use of any accessories except for those provided might result in
damage to the unit. Make sure only to use the accessories shipped with
the unit, as shown above.
Installation Procedure
1. To prevent a short circuit, remove the key from the ignition and
disconnect the - battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the following order: ground,
battery, ignition.
• After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
• Mount the unit so that the mounting angle is 30° or less.
5. Connect the wiring harness connector to the unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
— 31 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Wires to Terminals
Non-fading right output (Red)
(KDC-Z838 only)10
Front right output (Red) 28
Non-fading left output (White)
Front left output (White) 23
(KDC-Z838 only)29
27 Rear right output (Red)
AUX right input (Red)
AUX left input (White)
26 Rear left output (White)
2 KENWOOD disc changer control input
Fuse
(10A) 24
FM/AM antenna input 1
To connect the Disc changer,
consult your Disc changer
manual. 3
Wiring harness
(Accessory1)25
If no connections are made, do not let the wire come out from the tab.
4
5 When using the optional power amplifier,
29
connect to its power control terminal.
Power control wire (Blue/White) 15
White/Black
To front left
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
speaker 30
Motor antenna control wire (Blue)
White
17
31
32
Gray/Black
To car light control switch
Dimmer control wire (Orange / White)
18
To front right
speaker 33
8
Gray
23 To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
External amplifier control wire
(Pink / Black) 20
34
35
Green/Black
To rear left
speaker 36
Green
37
38
Ignition key
switch
10
Purple/Black
To rear right
ACC 13
speaker 39
Ignition wire (Red) 20
Purple
40
Car fuse box
(Main fuse)
11
Battery wire (Yellow) 21
Car fuse
box 14
Ground wire (Black) · (To car chassis) 22
–
+
Battery 12
— 32 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■ Installation
■ Installing in Japanese-Made Cars
1 Refer to the section "Removing the hard rubber frame" (page 34)
and then remove the hard rubber frame.
Firewall or metal support
2 Align the holes in the unit (two locations on each side) with the
vehicle mounting bracket and secure the unit with the accessory
screws.
Screw (M4X8)
(commercially
available)
N
T
8 mm
8mm
MAX.
MAX.
N
T/N
3
T
4
ø5mm
ø5mm
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place.
T: Toyota cars
N: Nissan cars
Accessory3...for Nissan car
Accessory4 ...for Toyota car
• During installation, do not use any screws except for those provided.
The use of different screws might result in damage to the main unit.
• Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.
Metal mounting strap
(commercially available)
Self-tapping screw
(commercially available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
■ Screwing the Faceplate on the Unit
Accessory5
If you want to fasten the
faceplate to the main unit so
that it does not fall off,
screw in the provided
Bottom panel
screws (ø4 X 16 mm) in the
holes shown below.
Never insert the taptite screw (ø4 × 16 mm) in any other screw hole
than the one specified. If you screw it in another hole, it will contact
and may cause damage to the mechanical parts inside the unit.
— 33 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■ Removing the hard rubber frame
■ Removing the Unit
1 Refer to the section “Removing the hard rubber frame” and then
remove the hard rubber frame.
1 Engage the catch pins on the removal tool and remove the two
locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
2 Remove the screw (M4 × 8) on the back panel.
3 Insert the two removal tools deeply into the slots on each side,
as shown.
Catch
Lock
Accessory2
Screw (M4X8)
Removal tool
(commercially
available)
Accessory2
Removal tool
2 When the lower level is removed, remove the upper two
locations.
4 Lower the removal tool
toward the bottom, and pull
out the unit halfway while
pressing towards the inside.
Be careful to avoid injury from
the catch pins on the removal
tool.
5 Pull the unit all the way out
with your hands, being
careful not to drop it.
The frame can be removed from the top side in the same manner.
— 34 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
What might seem to be a malfunction in your unit may
just be the result of slight misoperation or miswiring.
Before calling service, first check the following table
for possible problems.
? Even if Loudness is turned ON, high-pitched tone isn't compensated
for. 17
✔
Tuner source is selected.
☞ High-pitched tone isn't compensated for when in Tuner source.
? The Bass center frequency, Bass quality factor, Bass extend, Middle
center frequency, Middle quality factor, and Treble center frequency
can’t be adjusted.19
General
? The power does not turn ON.01
✔
The <System Q> (page 27) is set OFF.
✔
The fuse has blown.
☞ Set it ON.
☞ After checking for short circuits in the wires, replace the fuse with
one with the same rating.
? No sound can be heard, or the volume is low.
✔
The fader or balance settings are set all the way to one side.21
☞ Center the fader and balance settings.
✔
No ACC position on vehicle ignition.02
☞ Connect the same wire to the ignition as the battery wire.
✔
The input/output wires or wiring harness are connected incorrectly.22
☞ Reconnect the input/output wires or the wiring harness correctly.
See the section on <Connecting Wires to Terminals>.
? Nothing happens when the buttons are pressed.04
✔
The computer chip in the unit is not functioning normally.
☞ Press the reset button on the unit (page 4).
✔
✔
The values of Volume offset are low.24
☞ Increase the values of Volume offset. (page 9)
? There’s a source you can’t switch.06
✔
There’s no CD inserted.
The <Built-in Amp Mute Setting> (page 27) is ON.100
☞ Turn it OFF.
☞ Set the media you want to listen to. If there’s no media in this
unit, you can't switch to each source.
? The sound quality is poor or distorted.25
? The faceplate does not open or close.09
✔
One of the speaker wires is being pinched by a screw in the car.
✔
The faceplate is incorrectly attached.
☞ Check the speaker wiring.
☞ Reattach the faceplate correctly, See the section on <Removing
the Faceplate>(page 16).
✔
The speakers are not wired correctly.27
☞ Reconnect the speaker wires so that each output terminal is
connected to a different speaker.
? The memory is erased when the ignition is turned OFF.10
✔
The battery wire has not been connected to the proper terminal.
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? Non-fading output, Non-fading Low Pass Filter and Non-fading
setting can’t be done.28
✔
The <Non-fading output> (page 15) is OFF.29
☞ Turn it ON.
✔
The ignition and battery wire are incorrectly connected.11
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
✔
The <Dual zone system> (page 15) is ON.30
☞ Turn it OFF.
? There’s no loudness effect.12
? There’s no Front High Pass Filter and Rear High Pass Filter effect.31
✔
You’re using Non-fading preout.
✔
The Non-fading preout is being used.
☞ Loudness has no effect in Non-fading preout.
☞ There’s no effect in Non-fading preout.
— 35 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Disc source
? The Security Code item isn’t displayed in the Menu System.32
✔
The Security Code function is already activated.
☞ When the Security Code function is activated it isn’t displayed in
the menu items.
? "AUX" is displayed without achieving External disc control mode.50
✔
✔
O-N switch is set to "O" side.
☞ Set the switch to "N" side.
? The Touch Sensor Tone doesn’t sound.34
Unsupported disc changer is connected.51
☞ Connect the supported disc changer. (page 3)
✔
The preout jack is being used.
☞ The Touch Sensor Tone can’t be output from the preout jack.
? The specified disc does not play, but another one plays instead.52
? Even though the vehicle light switch is turned ON, the unit’s display
✔
✔
✔
The specified CD is quite dirty.
won’t dim.36
☞ Clean the CD.
✔
The dimmer wire isn’t connected.
The CD is upside-down.53
☞ Load the CD with the labeled side up.
☞ Connect the dimmer wire correctly.
? The Dimmer function doesn’t work. 38-1
The disc is loaded in a different slot from that specified.54
☞ Eject the disc magazine and check the number for the specified
disc.
✔
The Dimmer wire isn’t connected correctly.
☞ Check the Dimmer wire connection.
✔
The disc is severely scratched.55
☞ Try another disc instead.
? AUX cannot be selected. 103
✔
<Built-in Auxiliary input Setting> is turned off.
☞ Refer to the <Built-in Auxiliary input Setting> (page 28) in the
menu setting and turn on the <Built-in Auxiliary input Setting> .
? The specified track will not play.58
✔
Random play or magazine random play has been selected.
☞ Turn off random play or magazine random play.
Tuner source
? Track repeat, disc repeat, track scan, random play, and magazine
? Radio reception is poor.39
random play start by themselves.59
✔
✔
The car antenna is not extended.
✔
The setting is not canceled.
☞ Pull the antenna out all the way.
☞ The settings for these functions remain on until the setting to off
or the disc ejected, even if the power is turned off or the source
changed.
The antenna control wire is not connected.40
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? The desired frequency can’t be entered with the Direct Access
Tuning.41
✔
A station that can’t be received is being entered.
☞ Enter a station that can be received.
✔
You’re trying to enter a frequency with a 0.01 MHz unit.42
☞ What can be designated in the FM band is to 0.1 MHz.
— 36 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
MP3 source
? Cannot play CD-R or CD-RW.60
✔
✔
Finalization processing is not being conducted for CD-R/CD-RW.
? Cannot play an MP3.67
☞ Conduct finalization processing with CD recorder.
✔
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
A non-compatible CD changer is being used to play the CD-R/CD-
RW.61
☞ Use a CD changer compatible with CD-R/CD-RW to play.
✔
✔
The MP3 has no or invalid track name extension.68
☞ Add the ".MP3" extension to the MP3 track name.
? A CD ejects as soon as it is loaded.62
✔
The CD is upside-down.
The media is scratched or dirty.69
☞ Load the CD with the labeled side up.
☞ Clean the media, referring to the section on <CD cleaning> (page
5).
✔
The CD is quite dirty.63
☞ Clean the CD, referring to the section on <CD cleaning> (page 5).
? Noise or no sound generated when an MP3 is played.70
✔
The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Can’t remove disc.64
✔
The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
? Takes time before the unit starts playing MP3.71
☞ The disc can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
✔
The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? The disc won’t insert.65
✔
There’s already another disc inserted.
? Fails to play MP3 in the intended order.72
☞ Press the [0] button and remove the disc.
✔
The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
? Direct Track Search and Direct Album Search can’t be done.66-1
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
✔
Another function is ON.
☞ Turn Random Play or other functions OFF.
? Track Search can't be done.66-2
✔
For the albums first or last song.
? The sound skips when an MP3 is being played.73-1
☞ For each album, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
✔
The media is scratched or dirty.
☞ Clean the media, referring to the section on <CD cleaning> (page
5).
✔
The recording condition is bad.73-2
☞ Record the media again or use another media.
— 37 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
? Can't display the ID3 tag information correctly.75
✔
Record is not made in conformity with the ID 3 tag version1.x.
☞ Record in conformity with the ID 3 tag version1.x.
? The songs in the selected folder aren’t played in Album Select
mode.77
✔
There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
? The MP3 track/album search takes time.78
✔
Many tracks are recorded on the media.
☞ When the media directory is complex, the track/album search can
take time.
? The MP3 related text isn’t displayed correctly.79
✔
A character is entered that this unit can't display.
☞ For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
? The MP3 track time isn’t displayed correctly.80
✔
---
☞ There are times when it isn’t displayed correctly according to the
MP3 recording conditions.
If the following situations, consult your nearest service
center:
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
— 38 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
➪ Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
The messages shown below display your systems
condition.
Eject:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
➪ Load the disc magazine properly.
No CD in the unit.
Hold Error:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪ Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
➪ Insert the CD.
No Disc:
No disc has been loaded in the disc magazine.E02
➪ Load a disc into the disc magazine.
TOC Error:
No disc has been loaded in the disc magazine.E04
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
NO NAME:
NO TITLE:
NO TEXT:
Attempted to display DNPS during the CD play having
no disc names preset.E51
Attempted to display the disc title or track title while
the MD having no MD title is being played.E53
➪ Clean the CD and load it correctly.
• Attempted to display the disc text or track text
while the CD having no CD text is being played.E54
• Attempted to display text during reception of the
station that isn't sending text data.E55
• Attempted to display the ID3 tag while the MP3
having no ID3 tag is being replayed.E52
E-05:
The CD is upside-down.E05
➪ Load the CD correctly.
Blank Disc:
Nothing has been recorded on the MD.E10
No Track Disc: No tracks are recorded on the MD, although it has a
title.E11
Load:
Discs are being exchanged in the Disc changer.E57-1
E-15:
Media was played that doesn’t have data recorded
that the unit can play. E15
READING:
The unit is reading the data on the disc.E57-2
➪ Use media that has data recorded that the unit can
play.
NO ACCESS: After setting it in the Disc Changer, DNPP was done
without having it been played at least 1 time.E58
NO Panel:
E-77:
The faceplate of the slave unit being connected to
this unit has been removed.E30
➪ Replace it.
IN (Blink):
The CD player section is not operating properly.E59
➪ Reinsert the CD. If the CD cannot be ejected or the
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
The unit is malfunctioning for some reason.E77
➪ Press the reset button on the unit. If the "E-77"
code does not disappear, consult your nearest
service center.
Unsupported File: A MP3 is played with a format that this unit can't
support.E63
➪ ----
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
— 39 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range
Maximum output power.................................................50 W x 4
Full Bandwidth Power (at less than 1% THD) ...............22 W x 4
Tone action
(200 kHz space)...................................87.9 MHz – 107.9 MHz
(50 kHz space).....................................87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 30dB) ...................9.3dBf (0.8 µV /75 Ω)
Quieting Sensitivity (S/N = 50dB) ..............15.2dBf (1.6 µV /75 Ω)
Frequency response ( 3 dB).................................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................70 dB
Selectivity ( 400 kHz).......................................................≥ 80 dB
Stereo separation (1 kHz) ....................................................40 dB
Bass : ..............................................................100 Hz 10 dB
Middle : .............................................................1 kHz 10 dB
Treble : ............................................................10 kHz 10 dB
Preout level / Load (during disc play)
(KDC-Z838) ......................................................4500 mV/10 kΩ
(KDC-Z737) ......................................................1800 mV/10 kΩ
Preout impedance
(KDC-Z838).......................................................................80 Ω
(KDC-Z737)..................................................................≤ 600 Ω
Frequency response ( 1 dB).................................20 Hz – 20 kHz
Input Maximum Voltage .........................................................1.2 V
Input Impedance...............................................................≥ 44 kΩ
AM tuner section
Frequency range
(9 kHz space)............................................531 kHz – 1611 kHz
(10 kHz space)..........................................530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB)............................28 dBµ (25 µV )
CD player section
General
Laser diode....................................................GaAlAs (λ=780 nm)
Digital filter (D/A)......................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed
Operating voltage (11 – 16V allowable) .............................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) .........................180 x 50 x 159 mm
Weight ................................................................................1.4 kg
(KDC-Z838)............................1000 – 400 rpm (CLV 2times)
(KDC-Z737)..........................................500 – 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response ( 1 dB).................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (1 kHz)
(KDC-Z838) .....................................................................96 dB
(KDC-Z737) .....................................................................93 dB
Dynamic range
(KDC-Z838) .....................................................................95 dB
(KDC-Z737) .....................................................................93 dB
Channel separation
(KDC-Z838) .....................................................................90 dB
(KDC-Z737) .....................................................................85 dB
MP3 decode (KDC-Z838)
................Compliant with MPEG-1.0/2.0/2.5 Audio Layer-3
— 40 —
Download from Www.Somanuals.com. All Manuals Search And Download.
|