Integra Headphones RDC 71 User Manual

RDC-7.1  
Quick Guide  
• For full details on using the RDC-7.1, refer to the main instruction manual.  
Enjoying Home Theater  
Center speaker  
Complements the sound effects from  
front left and right speakers to enrich  
and clear the sound image and  
movement. In movies, an actor’s speech  
comes mainly from the center speaker.  
Front left and right speakers  
Outputs overall sound. They play the most important role in a home theater  
system, by creating basic sound images and fields.  
Place the front left and right speakers symmetrically and so that the dis-  
tance from the listening position is the same.  
When placing speakers, direct the speakers toward the position of the  
listener’s ears where the listener sits to enjoy music or movies.  
When placing the center speaker  
above or below the TV, tilt it toward  
the listener’s ears.  
Place the center speaker as close to  
the screen or monitor as possible and  
in the center between the left and  
right front speakers. When placing  
the center speaker near the TV, use a  
shielded speaker.  
Surround back speakers  
Enhances the sound space  
representation with  
surround channel signals.  
Recreating sound movement  
effects and sound fields  
behind the listener gives a  
more realistic experience.  
Subwoofer  
Outputs only bass sounds to  
enhance and complement bass  
sound effects.  
Surround left and right speakers  
Enhances the sensation of being at a live performance by giving three-dimensional  
sound movement to the sound effects.  
Place these speakers on each side of, or angled behind, the listener.  
Place the surround speakers symmetrically from the listener position and so that the  
distance from the listener is equal between left and right surround speakers.  
• For optimum surround playback, set the distance between the listener and the speakers so that the time it takes  
the sound to reach the listener is the same. Also, you need to set each speaker volume level individually in order  
to balance the volume level between speakers (See pages 92 to 94 in the main manual).  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Monitors such as TV or Projector  
An appropriate option board [H] [I] should be installed to connect a TV or a projector.  
• This section describes the connections for displaying the video source or the operating information of the RDC-7.1  
on a monitor device such as a TV or projector. Before making a connection, check the terminal types on the monitor  
device and acquire the necessary cables by referring to page 31 in the main manual.  
• When your TV or monitor has various types of input terminals, use the connection with which you can get the best  
video quality. On TV screen or projector which is connected via COMPONENT terminal, you can view the images  
from devices connected via VIDEO, S-VIDEO or COMPONENT terminal, because the RDC-7.1 has a built-in  
video-up converter. However, you cannot view the images from devices connected via COMPONENT terminal on  
TV or projector which is connected via VIDEO or S-VIDEO terminal (In this case of connection, images will be  
available if you use an HDMI terminal board).  
Monitor device  
such asTV or  
projector for  
VIDEO  
IN  
COMPONENT  
VIDEO (RCA)  
IN  
S VIDEO  
IN  
Main room A  
Y
PR  
PB  
S video  
connection  
cable  
Component video  
cable  
Video connection  
cable  
COMPONENT  
F
G
AUDIO IN  
H
I
S VIDEO  
IN  
VIDEO  
IN  
IN  
1
VIDEO  
R
L
R
L
12  
V
RS232  
IN  
2
TRIGGER  
OUT  
4
5
6
7
8
PH  
1
Y
E
2
3
4
5
6
PB  
PR  
Y
GND  
R
L
1
2
3
IR IN  
+
12  
V
DC PWR SUPPLY  
OUT  
1
S
IN 3  
20mA MAX.  
GND  
MAIN  
ZONE  
ZONE  
2
3
PB  
PR  
12V  
TRIGGER OUT  
1
2
9
4
A
200mA MAX.  
B
100mA MAX.  
C
100mA MAX.  
1
3
4
GND  
S
D
100mA MAX.  
E
3
5
2
TOTAL  
100mA MAX.  
R
L
R
L
OUT  
OUT  
VIDEO  
OUT  
VIDEO  
S
VIDEO  
S
VIDEO  
Option  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD Player  
An appropriate option board [H] [I] should be installed to connect a DVD player.  
The description here guides you to make connection between the RDC-7.1 and your DVD player in a quickest way  
where no modification is required for the default settings of the unit. The guidance is divided into 4 ways depending on  
the type of DVD player: If you have an IntegraRESEARCH RDV-1.1, follow the steps in this page for the typical  
connection procedure. If you plan to connect your DVD player, including the RDV-1.1, via the i.LINK terminal, refer  
to page 5. If you have a universal DVD player without i.LINK terminals to connect, refer to page 6. Finally, if you have  
any other DVD player than shown above, go to page 33 in the main manual.  
Connecting to an IntegraRESEARCH DVD player RDV-1.1  
1. Use an optical cable to connect the RDC-7.1’s DIGITAL IN OPTICAL 1 to the AUDIO OUT DIGITAL 1  
OPTICAL on your RDV-1.1.  
2. Use an AV cable to connect the RDC-7.1’s AUDIO IN 4 L/R to the AUDIO OUT D. MIX L/R on your  
RDV-1.1.  
3. Follow one of the instructions shown below to make a connection for video input.  
1. Use a component video connection cable to connect the RDC-7.1’s COMPONENT VIDEO IN 1 to the VIDEO  
OUT COMPONENT on your RDV-1.1. Note that TV or projector must also be connected via COMPONENT  
terminal.  
2. Use a S video cable to connect the RDC-7.1’s S VIDEO IN 1 to the VIDEO OUT S VIDEO on your RDV-1.1.  
3. Use an AV cable to connect the RDC-7.1’s VIDEO IN 1 to the video output on your RDV-1.1.  
4. Use an  
cable to connect the RDC-7.1’s  
terminal to the  
REMOTE CONTROL on your RDV-1.1.  
RS232  
HDMI  
OUT  
VIDEO IN  
VIDEO OUT  
COMPONENT  
AUDIO OUT  
IR  
D. MIX  
FRONT  
SURR  
1
CENTER  
SURR  
2
DIGITAL  
1
DIGITAL  
2
Y
Y
IN  
L
L
DVD PLAYER  
MODEL NO. RDV 1.1  
-
PB  
PR  
PB  
PR  
OUT  
R
R
REMOTE  
SUB  
COAXIAL  
OPTICAL  
COAXIAL  
OPTICAL  
CONTROL  
WOOFER  
AUDIO OUT  
DIGITAL  
2
(
)
BALANCED  
HD VIDEO OUT  
COMPONENT  
PB  
AES/EBU  
IN  
Y
PR  
AC INLET  
S400  
AUDIO  
(
)
1
S
VIDEO  
12  
V
TRIGGER  
VIDEO  
2
S
VIDEO  
VIDEO  
IN  
1
1
+
2
SURR MODE  
(
)
AUDIO OUT  
RDV-1.1  
3-2.S video  
cable  
2. AV cable  
1.Optical  
cable  
4.  
cable  
3-3. AV  
cable  
3-1. Component video  
connection cable  
COMPONENT  
VIDEO  
IN 2  
F
G
C
D
1
AUDIO IN  
H
S VIDEO  
IN  
VIDEO  
IN  
I
DIGITAL IN  
OPTICAL  
DIGITAL IN  
COAXIAL  
A
IN  
1
R
L
R
L
12  
V
RS232  
TRIGGER  
OUT  
4
PH  
1
1
Y
E
5
6
7
8
2
3
4
5
6
1
2
2
3
4
5
6
1
2
2
3
4
5
6
PB  
PR  
Y
GND  
R
L
1
2
3
IR IN  
+
12  
V
DC PWR SUPPLY  
OUT  
1
IN 3  
20mA MAX.  
GND  
MAIN  
ZONE  
ZONE  
2
3
PB  
PR  
12V  
TRIGGER OUT  
1
2
9
4
A
200mA MAX.  
B
100mA MAX.  
C
100mA MAX.  
1
3
4
GND  
D
100mA MAX.  
E
3
5
2
TOTAL  
100mA MAX.  
R
L
R
L
OUT  
OUT  
OUT  
VIDEO  
OUT  
VIDEO  
S
VIDEO  
S
VIDEO  
(
(
)
)
( )  
SINGLE  
AC INLET  
ASSIGNABLE  
ASSIGNABLE  
Option  
RDC-7.1  
Note:  
If your AV Controller has i.LINK terminals, see page 5.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to DVD player with i.LINK terminal  
Disconnect the  
cable when this type of connection is made on an IntegraRESEARCH/Onkyo DVD player.  
1. Use the S400 4-pin i.LINK cable to connect the i.LINK (AUDIO) terminal on the RDC-7.1 to the i.LINK  
(AUDIO) terminal on the i.LINK (AUDIO)-enabled DVD player.  
2. (Recommended) Use an audio connection cable to connect the RDC-7.1s AUDIO IN 4 L/R to the analog  
audio output on your DVD player.  
3. Follow one of the instructions shown below to make a connection for video input.  
(An appropriate option board [H] [I] should be installed to connect a DVD player.)  
1. Use a component video connection cable to connect the RDC-7.1’s COMPONENT VIDEO IN 1 to the Compo-  
nent Video Output on your DVD player. Note that TV or projector must also be connected via COMPONENT  
terminal.  
2. Use a S video connection cable to connect the RDC-7.1’s S VIDEO IN 1 to the S Video Output on your DVD  
player.  
3. Use a composite video connection cable to connect the RDC-7.1’s VIDEO IN 1 to the video output on your  
DVD player.  
DVD player  
AUDIO OUT  
S VIDEO  
OUT  
VIDEO  
OUT  
COMPONENT  
OUT (RCA)  
ANALOG  
L
Y
PB  
PR  
R
3-2.  
S video  
connection  
cable  
3-3.  
Video  
1. i.LINK cable  
connection  
cable  
2. Audio  
connection  
cable  
3-1.  
Component  
video  
connection  
cable  
COMPONENT  
VIDEO  
IN 2  
F
G
C
D
1
AUDIO IN  
L
H
S VIDEO  
IN  
VIDEO  
IN  
I
DIGITAL IN  
OPTICAL  
DIGITAL IN  
COAXIAL  
A
R
R
L
IN  
1
12  
V
RS232  
TRIGGER  
OUT  
4
5
6
7
8
PH  
1
1
Y
E
2
3
4
5
6
1
2
2
3
4
5
6
1
2
2
3
4
5
6
PB  
PR  
Y
GND  
R
L
1
2
3
IR IN  
+
12  
V
DC PWR SUPPLY  
OUT  
1
IN 3  
20mA MAX.  
GND  
MAIN  
ZONE  
ZONE  
2
3
PB  
PR  
12V  
TRIGGER OUT  
1
2
9
4
A
200mA MAX.  
B
100mA MAX.  
C
100mA MAX.  
1
3
4
GND  
D
100mA MAX.  
E
3
5
2
TOTAL  
100mA MAX.  
R
L
R
L
OUT  
OUT  
OUT  
VIDEO  
OUT  
VIDEO  
S
VIDEO  
S
VIDEO  
(
(
)
)
( )  
SINGLE  
AC INLET  
ASSIGNABLE  
ASSIGNABLE  
RDC-7.1  
Option  
4. When the connection is completed, power on the RDC-7.1 and TV (See steps 1 to 5 on page 7).  
5. Assign the DVD input source.  
(Remote controller)  
1. Press the [Input] button, and then roll the scroll wheel to select “DVD.”  
2. Press the scroll wheel, and then press the [Setup] button.  
3. Use the [ ]/[ ] buttons to select “Input Setup,” and then press the [Enter] button.  
4. Use the [ ]/[ ] buttons to select “Audio Assign” and then press the [Enter] button.  
5. Use the [ ]/[ ] buttons to select “i.LINK,” and then use the [ ]/[ ] buttons to select the DVD player.  
6. After setting, press the [Setup] button.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to universal DVD player with Multichannel terminal (When an optional Multichannel  
terminal board is installed on the RDC-7.1)  
1. Make a connection for digital audio signal.  
If your DVD player has optical output terminal:  
Use an optical cable to connect the RDC-7.1’s DIGITAL IN OPTICAL 1 to the optical output on your DVD  
player. Initially, the OPTICAL 1 digital input is assigned to the DVD input source.  
If your DVD player has only coaxial output terminal:  
Use a coaxial cable to connect the RDC-7.1’s DIGITAL IN COAXIAL 1-6 to the coaxial output on your DVD player.  
And you’ll need to reassign the DVD input source after completion of the connection followed by power-on.  
1. Press the [Input] button, and then roll the scroll wheel to select “DVD.”  
2. Press the scroll wheel, and then press the [Setup] button.  
3. Use the [ ]/[ ] buttons to select “Input Setup,” and then press the [Enter] button.  
4. Use the [ ]/[ ] buttons to select “Audio Assign” and then press the [Enter] button.  
5. Use the [ ]/[ ] buttons to select “Digital Audio,” and then use the [ ]/[ ] buttons to select appropriate ter-  
minal (Coax 1-Coax 6).  
6. After setting, press the [Setup] button.  
2. Use three or four audio connection cables or a multichannel connection cable to connect the multichannel  
output jack on your DVD player to the MULTI-CH IN 1 jack on the RDC-7.1.  
3. If your DVD player has 2-channel analog audio output terminals, in addition to those for multichannel  
output, use an audio connection cable to connect the RDC-7.1’s AUDIO IN 4 L/R to the terminals on your  
DVD player.  
4. Make a connection for video input (Refer to step 3 on page 5).  
DVD player  
VIDEO OUT  
AUDIO OUT  
MULTICH OUT  
AUDIO OUT  
ANALOG  
AUDIO OUT  
DIGITAL  
S VIDEO  
OUT  
VIDEO  
OUT  
COMPONENT  
OUT (RCA)  
CENTER  
SURR BACK  
FRONT  
SURR  
L
L
Y
PB  
PR  
R
R
OPTICAL  
SUB  
WOOFER  
4
4
4
3
1
2
2
2
2
2
COMPONENT  
VIDEO  
IN 2  
MULTI  
-INCH1  
F
G
C
D
1
E
AUDIO IN  
L
H
S VIDEO  
IN  
VIDEO  
IN  
I
DIGITAL IN  
OPTICAL  
DIGITAL IN  
COAXIAL  
A
R
R
L
IN  
1
12  
V
RS232  
FR  
SUB  
SR  
FL  
TRIGGER  
OUT  
4
5
6
7
8
9
PH  
1
1
Y
E
C
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
PB  
PR  
Y
GND  
SL  
R
L
1
2
3
1
IR IN  
+
12  
V
DC PWR SUPPLY  
OUT  
1
SBR  
SBL  
IN 3  
20mA MAX.  
GND  
MAIN  
ZONE  
ZONE  
2
3
FR  
FL  
PB  
PR  
SUB  
SR  
C
12V  
TRIGGER OUT  
A
200mA MAX.  
B
SL  
PB  
RDC-7.1  
Option  
Option  
5. When the connection is completed, power on the RDC-7.1 and TV (See steps 1 to 5 on page 7).  
6. Assign the DVD input source.  
(Remote controller)  
1. Press the [Input] button, and then roll the scroll wheel to select “DVD.”  
2. Press the scroll wheel, and then press the [Setup] button.  
3. Use the [ ]/[ ] buttons to select “Input Setup,” and then press the [Enter] button.  
4. Use the [ ]/[ ] buttons to select “Audio Assign” and then press the [Enter] button.  
5. Use the [ ]/[ ] buttons to select “Multichannel” and then use the [ ]/[ ] buttons to select “1.”  
6. After setting, press the [Setup] button.  
7. If you listen to an SACD or DVD-Audio disc, select “Multich” by pressing the [Audio SEL] button on the  
remote controller.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Supplied Power Cord  
1. Plug the supplied power cord into the AC  
INLET.  
2. Plug the other end of the power cord into the  
wall outlet.  
Power Cord  
(supplied)  
AC INLET  
Turning On the RDC-7.1 and playing  
a DVD  
1
2
3. Press the [Standby/On] button to turn on the  
RDC-7.1.  
Press the [On] button when using the remote con-  
troller.  
To wall outlet  
4. Turn on your DVD player and TV.  
5. Select the appropriate input on your TV.  
Select the input to which the RDC-7.1 is  
connected.  
3
Standby/On  
Power  
6. Select the DVD input source.  
Master  
V
olume  
On  
Press the [DVD] button on the RDC-7.1.  
Roll the scroll wheel to select the DVD input  
source, when using the remote controller. While  
neither the [Mode] button nor [Input] button is  
illuminated, rolling the scroll wheel changes the  
input source and remote controller mode.  
7. Start playback on your DVD player.  
Make sure that your DVD player’s digital audio  
output is turned on. On some players, the default  
setting is off. With some DVD-Video discs, you  
can select the audio format (Dolby Digital, DTS,  
PCM) from a menu.  
Standby  
Pure Audio  
Zone  
2
(GRN  
)
Rec/Zone  
3
(
RED)  
On  
O
f
f
DVD  
Video  
1
Video  
2
Video  
3
Video  
4
Video  
5
Video  
6
Video  
7
Tape  
1
Tape  
2
Tuner  
Phono  
C
D
Net Audio  
Open/Close  
Zone  
2
Rec/Zone  
3
Off  
Display  
DSP  
Dimmer  
Tuning  
Preset  
Tuning Mode Memory  
Clear  
Setup  
Enter  
Exit  
Phones  
AV  
Controller RDC-7.1  
6
8
On  
1
Standby  
TV  
I
Input  
3
+
TV CH  
-
2
ABC  
3
DEF  
@.-'/  
4
5
6
MNO  
GHI  
JKL  
7
8
9
WXYZ  
8. Adjust the volume.  
PQRS  
TUV  
TV VOL  
+
10  
Clear  
0
Rotate the [Master Volume] dial on the RDC-7.1,  
or press the [VOL] button on the remote controller,  
to obtain volume as desired.  
The volume can be adjusted from –, –81.5 dB to  
+18.0 dB (Max). Since the RDC-7.1 has been  
designed for home theater enjoyment, it has a wide  
volume range, allowing precise adjustment.  
#
-- ---  
/
Direct Tuning  
Custom  
Zone3  
Zone2  
Input  
Macro  
Mode  
6
Dimmer  
Sleep  
TV  
Input  
+
CH  
Enter  
VOL  
Disc  
8
-
Prev  
CH  
Operating DVD Player with the RDC-7.1s  
Remote Controller  
Display  
Muting  
Remote Control Code must be registered before  
operating a DVD player from other manufacturers. See  
page 129 in the main manual.  
Rec  
Main  
A
Main  
B
Random  
Audio  
Surround  
Subtitle  
THX  
Angle Last Memory  
ll CH ST Stereo  
A
When using an IntegraRESEARCH/Onkyo DVD player  
-
Repeat  
A
B
Search Memory  
Pure  
A
Direct  
Video  
DSP  
DSP  
with  
connection or i.LINK connection, operate the  
Repeat  
Music  
Photo  
-
+
Test Tone  
Playlist  
CH SEL  
Album  
Level  
Level  
player with the remote controller pointing at the  
RDC-7.1.  
Artist  
Genre  
-
AudioSEL  
Delete  
L
Night  
Re EQ  
Caps  
Language Location  
1. Press the [Mode] button, then roll the scroll  
wheel to select the DVD Mode.  
2. The buttons encircled by gray lines on the left  
figure are available for operation. See page 124  
in the main manual for details.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input source buttons  
Selecting Listening Modes  
Operating on the RDC-7.1:  
Use the [ ] DSP [ ] buttons to select a listening  
mode.  
Master  
V
olume  
Standby/On  
On  
Standby  
Pure Audio  
Zone  
Rec/Zone  
2
(GRN  
)
3
(
RED)  
Power  
On  
O
f
f
DVD  
Video  
1
Video  
2
Video  
3
Video  
4
Video  
5
Video  
6
Video  
7
Tape  
1
Tape  
2
Tuner  
Phono  
C
D
Net Audio  
Open/Close  
Zone  
2
Rec/Zone  
3
Off  
Display  
DSP  
Dimmer  
Tuning  
Preset  
Tuning Mode Memory  
Clear  
Setup  
Enter  
Exit  
Phones  
Operating with the remote controller:  
Press the scroll wheel, and then press the listening mode  
button you want to select.  
Available buttons are indicated on the left figure. See  
page 61 in the main manual for details.  
AV Controller RDC-7.1  
DSP  
Mode  
Input  
Sleep  
7
8
9
Dimmer  
PQRS  
TUV  
WXYZ  
TV VOL  
TV  
Input  
+
-- ---  
/
Clear  
10  
0
#
+
Direct Tuning  
CH  
Enter  
VOL  
Disc  
Custom  
-
Zone3  
Zone2  
Input  
Prev  
CH  
Display  
Muting  
Macro  
Mode  
Scroll wheel  
All CH ST  
Stereo  
THX  
Rec  
Main  
A
Main  
B
Random  
Dimmer  
Sleep  
Surround  
Audio  
Surround  
Subtitle  
THX  
Angle Last Memory  
ll CH ST Stereo  
A
TV  
Input  
-
Repeat  
A
B
Search Memory  
Pure  
A
Direct  
Video  
DSP  
DSP  
Pure A  
Direct  
DSP  
DSP  
Repeat  
Music  
Photo  
+
-
Level  
+
Test Tone  
Playlist  
CH SEL  
Album  
Level  
Artist  
Genre  
CH  
Enter  
VOL  
-
AudioSEL  
Delete  
L
Night  
Re EQ  
Disc  
Caps  
Language Location  
-
Prev  
CH  
Display  
Muting  
Changing the Audio Mode  
(Remote control only)  
Rec  
Main A  
Main B Random  
Angle Last Memory  
Audio  
Surround  
Subtitle  
THX  
All CH ST  
Stereo  
Operating with the remote controller:  
Press the scroll wheel, and then press the [Audio SEL]  
button. See page 57 in the main manual for details.  
-
A B  
Repeat  
Pure A  
Search Memory  
Direct  
Video  
DSP  
DSP  
Repeat  
Music  
Photo  
-
+
Test Tone  
Playlist  
CH SEL  
Album  
Level  
Level  
Artist  
Genre  
-
AudioSEL  
Delete  
L
Night  
Re EQ  
Caps  
Language Location  
Audio SEL  
Other Information  
See pages 50 through 51 in the main manual for basic operations with the remote controller.  
See pages 68 through 71 in the main manual for details about Zone 2 operations.  
See pages 66 through 67 in the main manual for multichannel playing.  
Printed in Japan  
D0411-1  
SN 29343696  
(C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved.  
* 2 9 3 4 3 6 9 6 *  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer WIA 111 User Manual
JVC Car Stereo System GET0122 001A User Manual
JVC Speaker KD AHD75BT User Manual
JVC Stereo Receiver RX 5022RSL User Manual
JVC VCR LPT0416 001A User Manual
Kenwood GPS Receiver TH D72A E User Manual
Kenwood Weather Radio TM 732A User Manual
KitchenAid Convection Oven KEMI300V User Manual
KitchenAid Oven KEBC247KBL07 User Manual
Konica Minolta Stereo System CA S20W User Manual