Kentrox Switch AAC 2TM User Manual

®
®
AAC-3 , AAC-2 and CellSMART  
Multi-service Access  
Concentrators  
CellSMART  
AAC-3  
AAC-2  
Features  
Scalable architecture provides  
flexibility as network requirements  
change  
• Multi-service access in a single  
device reduces recurring monthly  
access costs  
AAC Multi-service Access Concentrators  
cost-effectively connect voice, video and  
data traffic to private Wide Area Networks  
and public ATM and Frame Relay services  
worldwide. Supporting multiple protocols,  
physical interfaces and a wide range  
• Large variety of available interfaces  
supply serial ports, Frame Relay and  
T1/E1, NxT1/E1 IMA, T3/E3, and  
OC-3/STM-1 to deliver specific  
services for customer applications  
• Standards compliance with ATM  
Forum, Telcordia, NEBS Level 3,  
ITU-T and Frame Relay Forum  
ensures multi-vendor  
of bandwidth requirements, AAC and  
interoperability  
®
CellSMART products allow organizations  
• SNMP and Telnet allow manage-  
ment from local and remote sites  
and service providers to consolidate hybrid  
facilities for reduced costs and more efficient  
management of broadband networks.  
• Comprehensive ATM WAN service  
management for monitoring ATM  
services  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
Applications  
The wide array of Physical Layer Modules and  
Protocol Modules supports old and new applications  
alike. On the user side, legacy interfaces such as  
V.35/EIA-530 Packet and T1/E1 CBR protect your  
investment in existing routers, codecs, LAN switches  
and PBXs. Interfaces such as HSSI, T3/E3 and  
OC-3c/STM-1 ensure support for newer bandwidth-  
intensive applications.  
Shaping Cell PM is designed for use with public ATM  
services, shaping each connection to ensure the  
traffic complies with carrier service level agreements.  
Multiple PMs are available for Frame Relay services,  
ATM DXI, PPP and HDLC packet traffic. The Quad  
Packet and Quad Packet/CBR PMs support packet  
traffic over T1/E1 and low-speed V.35. The Packet  
PM supports packet traffic over T3/E3, HSSI, and  
high-speed V.35. All PMs support Frame Relay  
Link Management and Frame Relay-to-ATM Service  
Interworking (FRF.8) and Network Interworking (FRF.5).  
On the network side, AACs connect to WANs at  
speeds ranging from T1/E1 to OC-3c/STM-1. And to  
fill the gap between T1/E1 and T3/E3, ATM Forum-  
compliant Inverse Multiplexing for ATM (IMA) is  
available. The IMA module aggregates up to eight  
T1 or E1 lines into a single, logical link operating  
at up to 16 Mbps. The module uses a round-robin  
algorithm to divide traffic evenly across multiple  
links. Furthermore, if one or more links fails, the  
traffic is automatically redistributed among the  
remaining links, providing redundancy in the network.  
For circuit emulation, there are four or eight ports  
of structured or unstructured data transfer options.  
The Quad Packet/CBR PM supports up to four ports  
of unstructured circuit emulation on T1/E1 or V.35.  
The Octal CES PM supports up to eight ports of  
structured or unstructured T1/E1, up to four ports  
of unstructured V.35 or one port of unstructured  
T3/E3 or HSSI. The Octal CES PM also supports an  
Adaptive Timing option.  
The AAC family also offers numerous options for  
each protocol. For ATM UNI, both the Cell Protocol  
Module (PM) and the Enhanced Shaping Cell PM  
are available. The Cell PM is optimized for full  
throughput on high-speed private networks and  
local router or switch interfaces. The Enhanced  
The Ethernet PM and PLM pair supports RFC  
1483/AAL5 bridging with the Spanning Tree  
Protocol. The modules are designed for full-speed,  
point-to-point Ethernet connections over ATM.  
Cell PM  
Quad  
Cell PM Shaping  
Cell PM  
Enhanced Octal CES Packet  
Quad  
Packet  
PM  
Quad  
Packet/  
CBR PM  
Quad  
Ethernet  
PM  
PM  
PM  
(10200)  
(10202)  
(10204)  
(10207)  
(10201)  
(10205)  
(10203)  
(10206)  
DS3 PLM (10300)  
____________________________________________________________________________________________________  
HSSI PLM (10301)  
____________________________________________________________________________________________________  
Quad DSX-1 PLM (10302)  
____________________________________________________________________________________________________  
Tri V.35/530 & DSX PLM (10303)  
____________________________________________________________________________________________________  
OC-3c/STM1 MM PLM (10304)  
____________________________________________________________________________________________________  
OC-3c/STM1 SM PLM (10305)  
____________________________________________________________________________________________________  
E3 PLM (10306)  
____________________________________________________________________________________________________  
Quad E1 PLM (10307)  
____________________________________________________________________________________________________  
Tri V.35/530 & E1 PLM (10308)  
____________________________________________________________________________________________________  
Quad V.35/530 PLM (10309)  
____________________________________________________________________________________________________  
J2 PLM (10310)  
____________________________________________________________________________________________________  
Quad Ethernet PLM (10311)  
____________________________________________________________________________________________________  
Octal DSX-1 PLM (10314)  
____________________________________________________________________________________________________  
Octal E1 PLM (10315)  
____________________________________________________________________________________________________  
Octal DS1 PLM (10317)  
____________________________________________________________________________________________________  
Octal DS1 IMA PLM (10318)  
____________________________________________________________________________________________________  
Octal E1 IMA PLM (10319)  
Figure 2: AAC PM/PLM compatibility matrix.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 , and CellSMART  
OC-3/STM-1 T3/E3  
SMorMM  
J2  
IMA  
T1/E1  
T1/E1  
V.35, X.21  
EIA-530  
HSSI  
Ethernet  
ATM UNI  
____________________________________________________________________________________________________  
ATM DXI  
____________________________________________________________________________________________________  
Frame Relay  
____________________________________________________________________________________________________  
HDLC or PPP  
____________________________________________________________________________________________________  
SMDS DXI  
____________________________________________________________________________________________________  
SMDS SNI  
____________________________________________________________________________________________________  
Ethernet  
____________________________________________________________________________________________________  
CBR (CES)  
Figure 3: The AAC family supports numerous user and network interfaces.  
Element Management  
connection goes idle, the system can terminate the  
cell stream so that the bandwidth can be used by  
other VBR connections.  
The AAC family supports local and remote access  
via in-band or out-of-band connections. All products  
include an embedded SNMP agent and standard  
and enterprise MIBs, compatible with SNMP-based  
management systems. You can also Telnet to the  
devices via the Ethernet port on the Integrated  
System Controller or an in-band ATM/Frame Relay  
connection. The native user interface is menu  
driven, making port and connection configuration  
quick and easy.  
Performance Monitoring  
AAC systems collect extensive statistics, including  
port and cell utilization, cell and packet discard, and  
physical line errors. You can view the information  
in table or graphical form. With this information  
you can monitor network performance, anticipate  
growth in bandwidth requirements and trouble-  
shoot problems in both the local and wide area  
networks. The products also support a full range  
of loopbacks including line, local, and payload. In  
OC-3/STM-1 networks, you can insert BIP and AIS  
errors to test sections of that link.  
Traffic Management  
You can maximize the utilization of expensive  
wide-area bandwidth with AAC traffic  
management features. The Enhanced Shaping  
Cell Protocol Module performs traffic shaping on  
a per-VC and per-VP basis, ensuring that traffic  
meets the rates contracted with your carrier. This  
prevents cell discard and retransmissions, improving  
the overall use of available bandwidth. Connections  
exit the module through a weighted-fair queuing  
(WFQ) mechanism that ensures each connection  
gets scheduled bandwidth, even in the presence of  
congestion. The system uses early-packet discard  
(EPD) to reduce congestion quickly and to maximize  
network utilization.  
Standards Compliance  
AAC products comply with the relevant standards  
of the ATM Forum, ITU-T, Bellcore/Telcordia, the  
Frame Relay Forum, and the SMDS Interest Group.  
This alleviates compatibility issues in multi-vendor  
networks and reduces the risks associated with pro-  
prietary solutions.  
ATM Forum specification compliance includes  
ATM UNI 3.0 and 3.1; Traffic Management 4.0  
with support for CBR, rt-VBR, nrt-VBR and UBR  
QoS categories; Circuit Emulation Services 2.0 with  
support for structured or unstructured CES; and  
Inverse Multiplexing for ATM (IMA) 1.1/1.0  
Other AAC modules increase bandwidth utilization  
by reallocating idle CBR bandwidth. The Octal  
CES module monitors the CAS voice on/off hook  
status and V.35/CBR handshake signals. When a  
800.733.5511  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
AAC Service Data Module (SDM)  
Supports ATM Managed Services  
Monitors up to 512 VCs  
The Service Data Module for the AAC acts  
as a Visual Networks® Analysis Service Element  
(ASE). Specifically designed to support NxT1/E1 IMA  
or DS3/E3 ATM networks, it monitors user-specified  
ATM ports and circuits, and communicates service  
performance data and events to Visual UpTime®.  
Monitors ATM traffic on user-specified ports  
and VCs, up to a maximum aggregate rate  
equivalent to a bi-directional DS3  
Provides data for Visual UpTime Event Processor,  
Troubleshooting, and Planning and Reporting  
tool sets  
Kentrox and Visual Networks enable service  
providers to introduce WAN Performance  
Management Services based on industry-proven  
hardware and software solutions. Service providers  
can offer customers a variety of new managed  
service options and a higher degree of flexibility  
for hybrid ATM/Frame Relay networks.  
Provides valuable bandwidth utilization details  
with protocol analysis and top host statistics  
Sends SNMP traps regarding AAC events  
to Visual UpTime  
Site 1  
AAC-2 with  
SDM Module  
Frame Relay  
on HSSI  
ATM  
IMA  
ASE  
ATM Public  
Network  
Site 2  
T1  
Frame Relay  
Public  
Network  
AAC-2 with  
SDM Module  
T1  
T1  
ASE  
ASE  
Frame Relay  
on HSSI  
ATM  
on DS3  
Figure 4: AAC acting as an ASE for Visual UpTime.  
SLA Monitoring  
The Service Data Module for the AAC can be  
configured to supply Frame Relay Service Level  
Agreement (SLA) measurements to Kentrox  
Round-trip Delay  
End-to-end Delay  
ServicePoint and FrameVision devices in ATM and Frame Delivery Ratio  
Frame Relay mixed networks. The AAC responds to  
Frame PING messages (FPING) sent by ServicePoint  
Data Delivery Ratio  
and FrameVision devices delivering the following:  
Frames Dropped, Received and Transmitted  
P
B
X
ServicePoint SDU  
CBR on  
DSX-1  
T1  
IMA  
ATM Public  
Network  
CBR on  
V.35  
ServicePoint SDU  
Video  
Frame Relay  
Public  
Network  
T1  
AAC-2 with  
SDM Module  
Frame Relay  
on HSSI  
T1  
DataSMART Frame  
Monitoring DSU/CSU  
Figure 5: Providing SLA data by responding to FPING messages.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 , and CellSMART  
Specifications  
AAC-3 CHASSIS  
Dimensions (H x W x D): 13.95” x 17.32” x 19” (354.3 x 440 x 482.6 mm)  
Weight: 60 lbs. (27 kg)  
Mounting: Available for 19-inch or 23-inch standard equipment racks  
Operating Temperature: 32º F to 104º F, ambient (0° C to 40° C)  
Operating Humidity: 5% to 95%, non-condensing  
AAC-2 AND CELLSMART 200 CHASSIS  
Dimensions (H x W x D): 6.95” x 17.32” x 19” (176.5 x 440 x 482.6 mm)  
Weight: 29 lbs. (13.2 kg)  
Mounting: Available for 19-inch or 23-inch standard equipment racks  
Operating Temperature: 32º F to 104º F, ambient (0° C to 40° C)  
Operating Humidity: 5% to 95%, non-condensing  
EMI/ESD/SAFETY  
EMI: FCC Part 68, FCC Part 15, Class A, EN55022 Class B  
Immunity: EN55024  
Safety: UL1950, EN60950, CSA 22.2 No 950 - M95  
NEBS: Level 3 certified  
SWITCHING BACKPLANE  
Cell bus: Dynamic time-allocated, output buffered per port or connection  
Maximum system throughput: 524 Mbps (1,168,000 cells/second)  
Connections: 8192 VCCs, 512 VPCs, 512 Multicast  
POWER SYSTEM  
AAC-3: Dual redundant power system. Modular power supplies, field replaceable with unit powered. Monitored with  
alarms/traps on failure. Forced-air cooled. Supports mixed use of AC/DC power modules.  
AAC-2 and CellSMART 200: Single power system. Modular power supply. Monitored with alarms/traps on failure.  
Forced-air cooled. Supports use of AC/DC power modules.  
AC power supply modules: 120/240 VAC (85 to 264 volts), 50/60Hz +/- 3Hz  
DC power supply modules: -48 VDC (42 to 60 VDC)  
MANAGEMENT ACCESS  
Control port: VT100 via RS232 port on front panel (Additional RS232 port on the Integrated System Controller)  
Ethernet port: SNMP or Telnet  
In-band: SNMP or Telnet  
Telnet sessions: Up to 4 concurrently with the Integrated System Controller  
Common Modules  
INTEGRATED SYSTEM CONTROLLER (ISC)  
Clock sources: Internal reference oscillator or recovered from user-specified physical port  
Clock fallback: User-selectable primary and secondary clock source with automatic fallback and recovery  
Internal reference: Oscillator Stratum 4 or better  
Power loss protection: Loss of all input line power will not affect the configuration settings; performance data will  
be maintained for 12 hours upon loss of power  
Alarm: Critical, Major, and Minor alarm indicators are viewable from the rear  
Contact closure for audible and visual alarms  
ACO (Automatic Cut Off) button disables audible alarms  
Configuration backup: Pluggable Type II compact flash  
Management access: Ethernet port and DTE asynchronous port for dial-up modem (in addition to front panel port)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
Common Modules (continued)  
ALARM MODULE  
Indicators: Critical, Major and Minor alarm indicators are viewable from the front  
Alarm: ACO (Automatic Cut Off) button disables audible alarms  
Configuration backup: Flash  
SERVICE DATA MODULE (SDM)  
System indicators: Critical, Major and Minor  
SDM Indicators: SDM status and monitored traffic  
Alarm: ACO (Automatic Cut Off) button disables audible alarms and ACO indicator  
Configuration backup: 1 Mbyte non-volatile configuration on memory controlled by ISC module  
Traffic monitoring: Monitors up to 512 VCs.  
Maximum monitoring throughput: Monitors VCs with a maximum aggregate rate equivalent to bi-directional  
DS3 with 200-byte packets. Traffic greater than bi-directional DS3 is subject to discard.  
Select Protocol Modules  
See the PM/PLM compatibility matrix on page 3 for available Protocol and Physical Layer Module combinations  
CELL PROTOCOL MODULE  
Protocols supported: ATM UNI, SMDS SNI  
Connections: 256 VPCs, 4096 VCCs or combinations thereof up to 4096 total connections  
QoS categories: CBR, nrt-VBR and rt-VBR  
Output queuing: Separate CBR and VBR output queues with traffic and congestion management capability.  
Total queue depth: 4700 cells  
Maximum burst size: 32, 105, 210 or maximum cells  
Cell emission scheduling: Per port for VBR traffic only or aggregate (CBR and VBR) traffic  
Congestion management: Early packet discard (EPD) and 4 VBR priorities, CBR not subject to congestion, Partial  
Packet Discard (PPD)  
ENHANCED SHAPING CELL PROTOCOL MODULE  
Protocols supported: ATM UNI  
Connections: 256 VPCs, 1023 VCCs or combinations of up to 1023 total connections, 94 VPLs  
QoS categories: CBR, rt-VBR, nrt-VBR, UBR+, UBR  
Output queuing: Total queue depth 128K cells, allocated between VCCs and VPCs  
Cell emission scheduling: Per VC for all connections, nrt-VBR, UBR+ and UBR scheduled via a weighted-fair queuing (WFQ)  
mechanism  
Congestion management: Partial and early packet discard (EPD) implemented per VC  
QUAD CELL PROTOCOL MODULE  
Protocols supported: ATM UNI, SMDS SNI  
Connections: 256 VPCs, or 1024 VCCs or combinations of up to 1024 total connections  
QoS categories: CBR, nrt-VBR and rt-VBR  
Output queuing: Separate CBR & VBR output queues, with traffic and congestion management capabilities  
Congestion management: Early packet discard (EPD) and 4 VBR priorities, CBR not subject to congestion, Partial  
Packet Discard (PPD)  
PACKET PROTOCOL MODULE/QUAD PACKET PROTOCOL MODULE  
Protocols supported: Frame Relay, ATM DXI, HDLC, PPP, SMDS DXI  
Frame Relay connections:  
Packet PM: 2048 VCCs (AAL5) or DLCIs  
Quad Packet PM: 512 VCCs (AAL5) or DLCIs per port  
Services supported: FRF.5, FRF.8 (1490 to 1483 translation) and FRLM  
Congestion management: Partial and early packet discard (EPD) and 4 VBR priorities  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 , and CellSMART  
Select Protocol Modules (continued)  
OCTAL CES PROTOCOL MODULE  
Protocols supported: Structured or unstructured circuit emulation over AAL1  
Dynamic bandwidth allocation based on CAS signaling, idle code detection, or V.35 control signals  
Connections: 32 unicast or multicast per port, 256 per module  
Output queuing: User-selectable depth of CDV absorption queue to 1 ms  
Clocking: Synchronous or asynchronous (Adaptive)  
Logical bundles: 1 DS0 to 24 DS0s (T1) or 31 DS0s (E1)  
QUAD ETHERNET PROTOCOL MODULE  
Bridging performance:  
Filtering and forwarding rate: 14,880 pps each direction, each port, half-duplex  
Address table: 4096 addresses per module (1024 static entries per AAC system)  
Spanning Tree protocol: Per IEEE 802.1 D  
LLC Encapsulation: Using AAL 5 per RFC 1483  
Select Physical Layer Modules  
See the PM/PLM compatibility matrix on page 3 for available Protocol and Physical Layer Module combinations  
OCTAL IMA DS1 AND E1 PHYSICAL LAYER MODULES  
Interface connector: RJ48C  
Line rate: T1 - 1.544 Mbps per port  
E1 - 2.048 Mbps per port  
IMA rate: T1 - 1.536 to 12.288 Mbps  
E1 - 1.984 to 15.872 Mbps  
Differential delay: Up to 200 ms  
ACP sync cells: User selectable at 32, 64, 128 or 256 cells  
Link adjustment: Automatic adjustment on link failure or recovery  
OCTAL DS1, DSX-1 AND E1 PHYSICAL LAYER MODULES  
Interface connector:RJ48C  
Line rate: DS1 (includes CSU) - 1.544 Mbps per port  
DSX-1 - 1.544 Mbps per port  
E1 - 2.048 Mbps per port  
Channelization: NxDS0 up to full line rate  
QUAD DSX-1/E1 PHYSICAL LAYER MODULE  
Interface connector:DA15  
Line rate: DSX-1 - 1.544 Mbps per port; E1 - 2.048 Mbps per port  
Fractionalization: NxDS0 up to full line rate  
QUAD V.35/EIA-530 PHYSICAL LAYER MODULE  
Interface connector:DB25  
Electrical: V.35, RS449, EIA-530, X.21  
Line speed: 64 Kbps to 2.048 Mbps on each of four ports or up to 8.192 Mbps on one port  
HSSI PHYSICAL LAYER MODULE  
Interface connector: TIA/EIA-613 standard 50 position  
Line speed: 1 Mbps to 52 Mbps  
Continued on next page  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
Select Physical Layer Modules (continued)  
DS3 AND E3 PHYSICAL LAYER MODULES  
Interface connector: 75 ohm coaxial BNC  
Line rate: DS3 - 44.736 Mbps  
E3 - 34.386 Mbps  
OC-3C/STM1 SINGLE AND MULTI-MODE PHYSICAL LAYER MODULES  
Interface connector:Duplex SC  
Line speed: 155.52 Mbps  
Wavelength: 1310 nm (single-mode or multi-mode)  
QUAD ETHERNET PHYSICAL LAYER MODULE  
Data rates: 10 Mbps (per port) half duplex  
Number of ports: 4  
Interface connectors: RJ4  
Ordering Information  
Description  
Catalog Number  
Chassis and Power Supplies  
AAC-3 Eight Slot Chassis  
AAC-3 DC Power Supply  
AAC-3 AC 120 Volt Power Supply  
AAC-3 AC 240 Volt Power Supply  
AAC-3 AC 120/240 Volt Power Supply  
10000  
10101  
10100  
10102  
10103  
AAC-2 Four Slot Chassis  
AAC-2 DC Power Supply  
AAC-2 AC 120 Volt Power Supply  
AAC-2 AC 240 Volt Power Supply  
AAC-2 AC 120/240 Volt Power Supply  
10001  
10111  
10110  
10112  
10113  
Common Modules  
AAC Alarm Module  
10011  
AAC Service Data Module (SDM)  
AAC Integrated System Controller with 3.2.0 software  
10013  
10022-320  
Protocol Modules  
AAC Cell Protocol Module  
AAC Packet Protocol Module  
10200  
10201  
10202  
10203  
10204  
10205  
10206  
10207  
AAC Quad Cell Protocol Module  
AAC Quad Packet / CBR Protocol Module  
AAC Enhanced Shaping Cell Protocol Module  
AAC Quad Packet Protocol Module  
AAC Quad Ethernet Protocol Module  
AAC Octal CES/CBR Protocol Module  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 , and CellSMART  
Ordering Information  
Description  
Catalog Number  
Physical Layer Modules  
AAC DS3 Physical Layer Module  
AAC HSSI Physical Layer Module  
AAC Quad DSX-1 Physical Layer Module  
AAC Tri V.35/EIA-530/X.21 and one DSX-1 Physical Layer Module  
AAC OC-3c/STM1 MM Fiber Physical Layer Module  
AAC OC-3c/STM1 SM Fiber Physical Layer Module  
AAC E3 Physical Layer Module  
10300  
10301  
10302  
10303  
10304  
10305  
10306  
10307  
10308  
10309  
10310  
AAC Quad E1 Physical Layer Module  
AAC Tri V.35/EIA-530/X.21 and one E1 Physical Layer Module  
AAC Quad V.35/EIA-530/X.21 Physical Layer Module  
AAC J2 Physical Layer Module  
AAC Quad 10Base-T Ethernet Physical Layer Module  
AAC Octal (8-port) DSX-1 Physical Layer Module  
AAC Octal (8-port) E1 Physical Layer Module  
AAC Octal (8-port) DS1 (CSU) Physical Layer Module  
AAC Octal (8-port) IMA DS1 Physical Layer Module, FW 2.0.0  
AAC Octal (8-port) IMA E1 Physical Layer Module, FW 2.0.0  
10311  
10314  
10315  
10317  
10318-200  
10319-200  
CellSMART 200 ATM IMA Systems  
CellSMART 201t, ISC DS1 Octal IMA to HSSI, 120V AC  
CellSMART 201e, ISC E1 Octal IMA to HSSI, 240V AC  
CellSMART 202t, ISC DS1 Octal IMA to V.35,(6 Mbps), 120V AC  
CellSMART 202e, ISC E1 Octal IMA to V.35 (8 Mbps), 240V AC  
CellSMART 203t, ISC DS1 Octal IMA to 10Base-t, 120V AC  
CellSMART 203e, ISC E1 Octal IMA to 10Base-t, 240V AC  
CellSMART 204t, ISC DS1 Octal IMA to OC-3c/STM-1, 120V AC  
CellSMART 204e, ISC E1 Octal IMA to OC-3c/STM-1, 240V AC  
CellSMART 205t, ISC DS1 Octal IMA to DS-3, 120V AC  
CellSMART 205e, ISC E1 Octal IMA to E3, 240V AC  
20001-310  
20002-310  
20003-310  
20004-310  
20005-310  
20006-310  
20007-310  
20008-310  
20009-310  
20010-310  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
Ordering Information  
Description  
Catalog Number  
Accessories  
AAC-3 Fan Tray Assembly (Spare)  
AAC-3 23" Rack Mount Brackets  
AAC-2 23" Rack Mount Brackets  
AAC Blank Panel, 1 Slot (Spare)  
AAC-3 Blank Panel, Power Supply (Spare)  
AAC-3 Cable Management Bar  
AAC-2 Enhanced NEBS Baffle Kit  
AAC Manual Set, CD (Spare)  
10080  
10081001  
10081010  
10082  
10084  
10087  
10088  
10090-310  
5000548  
5000549  
5000550  
AAC/CellSMART Planning Guide, printed  
AAC/CellSMART Installation Guide, printed (spare)  
AAC/CellSMART User's Guide, printed  
Memory Cards with Software  
AAC ISC Back-up Software Compact Flash Type 2  
AAC Octal IMA Firmware 2.0.0 Compact Flash Type 2  
10038-320  
10036-200  
Power Cords  
North America, Korea, Taiwan  
European Community  
United Kingdom  
Italy  
90000  
90001  
90002  
90003  
90004  
90005  
Australia  
Japan  
800.733.5511  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
®
AAC-3 , AAC-2 and CellSMART  
Multi-service Access Concentrators  
Phone: 503-643-1681 • Toll Free: 800-733-5511 • Fax: 503-350-6897  
Kentrox, LLC., 20010 NW Tanasbourne Drive, Hillsboro, OR 97124  
Kentrox, AAC-3, CellSMART and DataSMART are registered trademarks of Kentrox, LLC. AAC, AAC-2, FrameVision, ServicePoint and  
ServicePoint Manager are trademarks of Kentrox, LLC. Visual Networks and Visual UpTime are registered trademarks of Visual Networks  
Technologies, Inc. All other products are trademarks of their respective owners. Specifications published here are current as of the date of  
publication of this document. At any time, you may verify product specifications by contacting our headquarters in Hillsboro.  
05-06-015-2 2/03 © 2002-2003 by Kentrox, LLC. All Rights Reserved. An Equal Opportunity Employer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Water Pump PD05P XXX XXX User Manual
Intel Computer Hardware MB900 R User Manual
Jenn Air Range JGR8895BD User Manual
Jensen Car Speaker XS4420Sm User Manual
Jet Tools Saw J 7020 User Manual
JL Audio Car Speaker SB GM SLVEXT 12W3 User Manual
JVC Car Video System DT X91C User Manual
Keating Of Chicago Griddle 3624 361 User Manual
Kenmore Dishwasher 6651301 User Manual
KitchenAid Blender KFP740 User Manual