IMPRESSA F90/F9
Instructions for use
3/05
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 5
Fig. 9
Fig. 13
Fig. 2
Fig. 3
Fig. 4
Fig. 6
Fig. 7
Fig. 8
Fig. 10
Fig. 11
Fig. 12
Fig. 14
Fig. 15
Fig. 16
2
3
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Control elements
A) Display dialog system
7
8
9
B) Symbols
(navigation in programming mode)
10
11
12
C) Large cup
D) Coffee
E) Espresso
F) Start (to start the draw-off operation)
G) Coffee strength «mild»
H) Coffee strength «Normal»
I) Coffee strength «strong»
6
5
13
4
3
1 Programming key
2 Selection key for pre-ground coffee
3 Draw-off key 1 cup
4 Draw-off key 2 cups
5 ON/OFF key
6 Maintenance key
7 Connectivity socket
8 Control panel
9 Filler funnel key for pre-ground coffee
10 Bean tank cover
11 Water tank with handle
12 Water portion draw-off key
13 Steam portion draw-off key
14 2-stage frothing jet (Fig. 7)
15 Replaceable hot water jet
16 Height-adjustable coffee spout
17 Cup illumination (Fig. 10)
18 Coffee grounds container
19 Drip grate
2
1
14/15
16
21
17
18
19
20
20 Drip tray
21 Power switch
PROGRAMMATION
Sensitive Touch Screen Technology
A)
B)
8
8
C) D)
E)
F)
G)
H)
I)
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Programming ................................................page 13
13.1 Programming the filter ...........................page 14
13.2 Programming the water hardness...............page 14
13.3 Programming the aroma INTENSIVE
Contents
JURA IMPRESSA
1. Description of control panel ..............................page
2. Safety information ..........................................page
2.1 Warning.................................................page
2.2 Precautions.............................................page
2.3 Power Switch ..........................................page
3. Preparing the coffee machine for use...................page
3.1 Check the mains voltage.............................page
3.2 Check electrical fuse .................................page
3.3 Refill water.............................................page
3.4 Filling the bean tank .................................page
3.5 Adjusting the grinding gear.........................page
4. First use.......................................................page
4.1 Cup illumination.......................................page
5. Adjustment of water hardness............................page
6. Installation of CLARIS plus filter cartridges .........page
6.1 Installing the filter....................................page
6.2 Replacing the filter ...................................page
7. Rinsing the coffee machine................................page 10
8. Drawing off coffee ..........................................page 10
8.1 Drawing off espresso .................................page 10
8.2 Drawing off a large cup of coffee .................page 10
8.3 Drawing off pre-ground coffee .....................page 11
9. Drawing off hot water......................................page 11
10. Drawing off steam ..........................................page 12
11 Drawing off steam with the
6
6
6
6
7
7
7
7
7
7
7
7
8
8
9
9
9
or STANDARD......................................page 14
13.4 Programming the temperature ..................page 14
13.5 Programming the water quantity ...............page 14
13.6 Programming 1 cup ...............................page 15
13.7 Programming the steam portion ................page 15
13.8 Programming the water portion ................page 16
13.9 Programming the time ............................page 16
13.10 Programming the automatic switch-on
time ...................................................page 16
13.11 Programming the automatic switch-off
time ...................................................page 16
13.12 Cup counter..........................................page 17
13.13 Programming the language ......................page 17
13.14 Connectivity .........................................page 18
14. Maintenance..................................................page 18
14.1 Refilling water ......................................page 18
14.2 Emptying the coffee grounds container........page 18
14.3 No Drip tray.........................................page 18
14.4 Filling the bean tank ..............................page 18
14.5 Replacing the filter ................................page 18
14.6 Cleaning the coffee machine .....................page 19
14.7 Coffee machine calcified..........................page 19
14.8 General cleaning instructions....................page 19
14.9 Emptying the system ..............................page 19
15. Cleaning.......................................................page 19
16. De-scaling.....................................................page 20
17. Disposal .......................................................page 21
18. Tips for perfect coffee......................................page 21
19. Messages......................................................page 22
20. Problems ......................................................page 23
21. Legal information ...........................................page 24
22. Technical data ...............................................page 24
E
Professional-Cappuccino Frother........................page 12
11.1 Connecting the Professional-Cappuccino
Frother to the F90/F9.............................page 12
11.2 Drawing off cappuccino and hot milk with
the Professional-Cappuccino Frother ..........page 12
11.3 Cleaning the Professional-Cappuccino
Frother ...............................................page 13
12. Switching off the coffee machine ........................page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Ⅲ The coffee machine may only be used by instructed persons.
Important information
Ⅲ Never use a defective coffee machine or a machine with a
defective mains cable.
Thank you very much for purchasing this IMPRESSA coffee
machine.
Ⅲ Never immerse the coffee machine in water.
Before using your new coffee machine for the first time, carefully
read this operating manual and keep it for future reference.
Should you need more information or if you meet with particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
Ⅲ Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
2.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
You will also find useful tips on operation and maintenance
Don’t forget to check out the Knowledge Builder our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
1. Description of control panel
Ⅲ Always disconnect mains cable before cleaning the machine.
Ⅲ When disconnecting the mains cable never pull on the mains
cable or the machine itself.
A gentle push on the control panel will do, and the sensors will
read your wish from your fingertips. The IMPRESSA offers Café à
la Carte, coffee to the taste of everybody. You can select one of the
programmed coffee specialities at a gentle touch on the touch
screen.
Ⅲ The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
As a result of high electromagnetic interference, the touch screen
may become inactive. All the remaining draw-off keys, the selec-
tion key for pre-ground coffee, draw-off key 1 cup, draw-off key 2
cups, can still be used.
Ⅲ Never put the coffee machine or individual parts of it into a
dishwasher.
Ⅲ Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
2. Safety information
2.1 Warning
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
2.3 Power switch
3.4 Filling the bean tank
Actuate the power switch (21) on your IMPRESSA before
using the machine for the first time.
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding ge-
ar. Any repair costs resulting from the use of such blends are
not covered by warranty.
We recommend that you switch off your IMPRESSA with
the power switch (21) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
3. Preparing the coffee machine for use
3.1 Check the mains voltage
Ⅲ Open the cover of the bean tank (10).
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
The coffee machine is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
coffee machine.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use
3.2 Check electrical fuse
a fine adjustment Ǟ (the smaller the dots, the finer the
E
The coffee machine is designed for an electric current of 10
Ampères. Check if the electrical fuse has sufficient capacity.
grinding is) for a light roast
a coarse adjustment Ǟ (the bigger the dots, the coarser the
grinding is) for a dark roast
3.3 Refill water
The grinding degree may only be adjusted while the grinding
gear is running.
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Ⅲ Open the cover of the bean tank (10).
Ⅲ Take out the water tank and thoroughly rinse it with cold tap
water (Fig. 1).
Ⅲ To adjust the grinding degree turn the rotary switch (Fig. 2) to
the required position.
Ⅲ Then fill the water tank and re-install it in the coffee machine.
Make sure the tank is installed correctly and that it engages
properly.
4. First use
Ⅲ Fill coffee beans in the bean tank (10).
Ⅲ Fill water tank.
Ⅲ Switch on your coffee machine using the key
.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
1° German hardness is equivalent to 1.79° French hardness.
Ⅲ
Ⅲ
Ⅲ
WWW.IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
FILL SYSTEM / WATER PORTION
The coffee machine has 5 hardness degrees which can be used and
are displayed while you are adjusting the water hardness.
Ⅲ Place an empty cup under the hot water jet (15).
Ⅲ Press water portion draw-off key
The displayed information means the following:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
SYSTEM FILLING
WATER
MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
HARDNESS –– Water hardness function switched off
WATER
HARDNESS 1
German water hardness degree 1 to 7°
French Water hardness degree 1.79 – 12.53°
WATER
German water hardness degree 8 to 15°
Ⅲ Press symbol
.
HARDNESS 2
French Water hardness degree 14.32 – 26.85°
Ⅲ
COFFEE NORMAL
WATER
German water hardness degree 16 to 23°
HARDNESS 3
French Water hardness degree 28.64 – 41.14°
If FILL BEANS is displayed, touch the symbol
again. The mill was still empty.
WATER
HARDNESS 4
German water hardness degree 24 to 30°
French Water hardness degree 42.96 – 53.7°
To get an excellent froth, adjust the coffee spout (16) to the
size of your cup (Fig. 3 ).
When the machine leaves the factory it is adjusted to WATER
HARDNESS 3. You can adjust another hardness. To do this,
proceed as follows:
Pull out the mains cable from the cable box on the rear side of the
coffee machine and connect the machine to mains supply.
4.1 Cup illumination
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
When you plug in or switch on the machine or press any key, the
cup illumination is activated for 1 minute. To switch on the cup il-
lumination, with the machine switched off, press any key (Fig. 10).
Ⅲ Press the key
WWW.IMPRESSA-F-LINE.COM
Ⅲ Your coffee machine is switched to start-up position.
to switch on the coffee machine.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
5. Adjustment of water hardness
In the coffee machine water is heated up. As a result, calcifi-
cation occurs during normal use and is indicated auto-
matically. Before using the machine for the first time the
hardness of the water used must be adjusted. Use the sup-
plied test sticks for this.
PLEASE SELECT
Ⅲ Press programming key
FILTER NO
until you hear an acoustic signal.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Ⅲ
NO FILTER
Ⅲ Press symbol
WATER HARDNESS 3
Ⅲ Press symbol , you will hear an acoustic signal and the
until the following message is displayed:
Ⅲ Press symbol
Ⅲ Press symbol
, NO flashes on the display.
Ⅲ
until the following message is displayed:
hardness degree flashes.
Ⅲ
FILTER YES (YES flashes)
Ⅲ Press symbol
INSTALL FILTER / WATER PORTION
Ⅲ Place a sufficiently large jug (approx 1 litre) under the hot water
jet (15) and press the water portion draw-off key
FILTER RINSING. The water draw-off operation is
stopped automatically.
Ⅲ Now, press symbols
degree.
to adjust the required hardness
.
Ⅲ
Ⅲ Press symbol
to confirm the new settings.
Ⅲ
WATER HARDNESS 4
.
Ⅲ Press programming key
to leave Programming Mode.
Ⅲ
Ⅲ
PLEASE SELECT
Ⅲ
Ⅲ
MACHINE HEATING UP
6. Installation of CLARIS plus filter cartridges
PLEASE SELECT
If the CLARIS plus filter cartridge is installed properly, de-
scaling of the coffee machine is no longer required. For
more information on the CLARIS plus filter cartridge refer
to brochure «CLARIS plus». Hard on limescale. Gentle on
your coffee machine.»
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
E
6.2 Replacing the filter
Ⅲ
REPLACE FILTER / PLEASE SELECT
to switch off the coffee machine.
GOOD BYE
6.1 Installing the filter
Ⅲ Use the key
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ Press maintenance key
for some seconds, with the machine
switched off.
Ⅲ
INSTALL FILTER / WATER PORTION
Ⅲ Fold up the cartridge holder. Insert the filter cartridge in the
water tank (Fig. 4)
PLEASE SELECT
Ⅲ Close the cartridge holder until it engages audibly.
Ⅲ Fold up the cartridge holder. Insert the filter cartridge in the
water tank (Fig. 4)
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it in
the coffee machine.
Ⅲ Close the cartridge holder until it engages audibly.
Ⅲ Place a sufficiently large jug (approx 1 litre) under the hot water
Ⅲ Fill the water tank with cold, fresh tap water and install it again.
jet (15) and press the draw-off key
.
Ⅲ Press Programming key
until you hear an acoustic signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Ⅲ
FILTER RINSING. The water draw-off operation is
stopped automatically.
Ⅲ
COFFEE NORMAL
Ⅲ Press symbols ( ) to select the strength of your coffee.
COFFEE STRONG
Ⅲ Press symbol
/
/
Ⅲ
Ⅲ
MACHINE HEATING UP
Ⅲ
PLEASE SELECT
.
Ⅲ
Ⅲ
COFFEE STRONG Your product is being prepared.
7. Rinsing the coffee machine
PLEASE SELECT
When the coffee machine was switched off and has cooled
down in the meantime, a rinsing operation is started when
the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatically.
8.1 Drawing off espresso
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol
PLEASE SELECT
.
Ⅲ
ESPRESSO NORMAL
8. Drawing off coffee
Ⅲ Press (
/
/
) to select the strength of your espresso.
You can change the selected product at any time by pressing
the symbols before starting the operation by pressing
. The selected product is displayed.
Ⅲ
ESPRESSO STRONG
Ⅲ Press symbol
.
Ⅲ
ESPRESSO STRONG. Your product is being pre-
pared.
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
PLEASE SELECT
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
8.2 Drawing off a large cup of coffee
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
Ⅲ
Ⅲ
Ⅲ
PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol
.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ⅲ
Ⅲ
MACHINE RINSING
Ⅲ
FILL IN POWDER / PLEASE SELECT
PLEASE SELECT
Ⅲ Now fill in 1 or 2 level dosing spoonfuls of pre-ground coffee in
the filler funnel for pre-ground coffee (Fig. 5).
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol
.
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press the
corresponding symbol (
/
/
).
Ⅲ
LARGE CUP NORMAL
Ⅲ
LARGE CUP POWDER
Ⅲ Press (
/
/
) to select the strength of your coffee.
Ⅲ Press symbol
.
Ⅲ
LARGE CUP MILD
Ⅲ
LARGE CUP POWDER Your powder coffee is
being prepared.
PLEASE SELECT
Ⅲ Press symbol
.
Ⅲ
Ⅲ
LARGE CUP MILD Your product is being prepared.
Ⅲ
PLEASE SELECT
9. Drawing off hot water
8.3 Drawing off pre-ground coffee
You can adjust the water portion individually (see Chapter
12 Programming). Install the hot water jet (Fig. 7) to obtain
perfect water flow.
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
E
At the start of the water draw-off there can be splashing
Avoid direct contact with the skin!
Do not replace the replaceable hot water jet directly after
drawing off water, because the jet is hot after the draw-off
operation.
If you press the draw-off key unintentionally, you can stop
the operation by pressing the maintenance key. Your coffee
machine will carry out a rinsing operation.
Ⅲ Place a cup under the hot water jet (15).
Ⅲ Press water draw-off key
WATER PORTION
Ⅲ The programmed portion is being prepared. You can stop the
.
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
draw-off operation at any time by pressing the draw-off key
.
Ⅲ
PLEASE SELECT
PLEASE SELECT
Ⅲ Press selection key
.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
10. Drawing off steam
Ⅲ
PLEASE SELECT
Ⅲ Press steam portion draw-off key
.
To ensure perfect operation, clean the 2-stage frothing jet
(14) regularly. Screw the jet off as described. Hold the jet at
the top and at the bottom end and screw it apart (Fig. 9).
Thoroughly rinse the 3 parts under running water.
Ⅲ
Ⅲ
MACHINE HEATING UP
PLEASE SELECT
Ⅲ Place a cup under the 2-stage frothing jet (14) and immerse the
frothing aid in the milk to be frothed or the liquid to be heated.
Make sure the nozzle has engaged properly. Il the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
Ⅲ Press steam draw-off key
STEAM PORTION. Your product is being prepared.
Ⅲ You can stop the draw-off operation at any time by pressing the
steam draw-off key
PLEASE SELECT
again.
Ⅲ
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the 2-stage frothing jet (14) is
pushed upwards when liquids are heated. To froth liquids,
push the 2-stage frothing jet downwards, turning it slightly
(Fig. 7).
.
Ⅲ
11. Drawing off steam with the
Professional-Cappuccino Frother (optional F90)
If you do not draw off steam within 3 minutes, steam draw-
off mode is terminated.
The Professional-Cappuccino Frother is optionally available.
Contact your authorized dealer.
Install the 2-stage frothing jet (Fig. 7). This is included in
your Welcome Pack.
11.1 Connecting the Professional-Cappuccino
Frother to the F90/F9
During frothing some water will escape the system before
the actual steam draw-off. This does not affect the result, e.g.
when frothing milk.
Ⅲ Disassemble the replaceable hot water jet or the 2-stage frothing
jet (Fig. 7).
At the start of the water draw-off there can be splashing.
The 2-stage frothing jet becomes hot. Avoid direct contact
with the skin!
Ⅲ Mount the Professional-Cappuccino Frother (Fig. 11).
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 13).
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
The optionally available milk container can be used for
sucking in milk. How to connect it (see Fig. 12).
Ⅲ
Ⅲ
Ⅲ
Ⅲ
MACHINE RINSING:
Download from Www.Somanuals.com. All Manuals Search And Download.
12
11.2 Drawing off cappuccino and hot milk with
Professional-Cappuccino Frother
12. Switching off the coffee machine
To ensure perfect operation, please switch your IMPRESSA
to standby mode with the
machine off with the power switch (21).
symbol first. Then switch the
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
Ⅲ Place a cup under the Professional-Cappuccino Frother.
Ⅲ Press the steam portion draw off key (13)
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ
PLEASE SELECT
Ⅲ
Ⅲ
MACHINE HEATING UP
Ⅲ Use
key to switch OFF your coffee machine.
GOOD BYE
PLEASE SELECT
Ⅲ
Ⅲ Press the steam portion draw off key (13) again
STEAM PORTION
Ⅲ The automatic rinsing operation is started.
Ⅲ
Ⅲ The frothing/heating time depends on the steam portion settings
you have programmed. (See “Programming steam portion”
Chapter 13.7)
13. Programming
When your coffee machine leaves the factory it is adjusted such
that you can draw off coffee without having to change any settings.
However, you can programme various parameters individually.
Ⅲ For cappuccino turn the selector switch (1) (Fig. 16) to area
(2).
Ⅲ For hot milk turn the selector switch (1) (Fig. 16) to area (3).
You can programme the following stages:
E
Ⅲ Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.
ꢀ Filter
ꢀ Water hardness
ꢀ Aroma
ꢀ Temperature
ꢀ Water quantity for coffee
ꢀ 1 Cup
11.3 Cleaning the Professional-Cappuccino Frother
The Professional-Cappuccino Frother must be cleaned after
each draw-off operation. Daily cleaning is recommended.
ꢀ Steam portion
ꢀ Water portion
ꢀ Time
Ⅲ Fill water in a container and immerse the hose in it.
Ⅲ Draw off steam until the water/steam mixture is clean.
ꢀ Automatic switch-on time
ꢀ Automatic switch-off time
ꢀ Draw offs
Ⅲ If necessary, disassemble the Professional-Cappuccino Frother
and thoroughly rinse the flow regulation with water (Fig. 14 and
Fig. 15).
ꢀ Language
For proper cleaning, use the JURA Auto Cappuccino Clean-
ing Agent which is available at your authorized dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
13.1 Programming the filter
13.4 Programming the temperature
Refer to Chapter 6.1 «Inserting the filter».
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
13.2 Programming the water hardness
Refer to Chapter 5 «Adjusting the water hardness».
PLEASE SELECT
13.3 Programming the aroma INTENSIVE or
STANDARD
Ⅲ Press programming key
Ⅲ Touch symbol
until you hear an acoustic signal.
until the following message is displayed:
, you will hear an acoustic signal and HIGH
The aroma for the powder quantities (
adjusted to Intensive in the factory. If requested it can also
be set to Standard.
/
/
) was
Ⅲ
TEMP. HIGH
Ⅲ Press symbol
flashes.
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Ⅲ Use the symbol
Ⅲ Press symbol
to adjust the temperature to NORMAL.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
to confirm your settings.
Ⅲ
TEMP. NORMAL
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
to quit Programming Mode.
PLEASE SELECT
Ⅲ Press programming key
Ⅲ Touch symbol
until you hear an acoustic signal.
13.5 Programming the water quantity
until the following message is displayed:
, you will hear an acoustic signal, IN-
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Ⅲ
AROMA INTENSIVE
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ Press symbol
TENSIVE flashes.
Ⅲ Use the symbols
Ⅲ Press symbol
to adjust the aroma to STANDARD.
to confirm the new settings.
PLEASE SELECT
Ⅲ
AROMA STANDARD
Ⅲ Press programming key
Ⅲ Press symbol
until you hear an acoustic signal.
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
until the following message is displayed:
.
to quit Programming Mode.
Ⅲ
WATER QUANTITY
Ⅲ Press symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Ⅲ
1 CUP STRONG
Ⅲ Press symbol to save the new settings.
1 CUP 180 ML (for example)
Ⅲ Use the symbols to reach the next programming stage or
press key to quit Programming Mode.
Ⅲ
SELECT PRODUCT
Ⅲ Select the product, the water quantity of which you want to
programme (
COFFEE 90 ML
/
/
)
Ⅲ
Ⅲ
Ⅲ Press symbol
Ⅲ Use symbols
Ⅲ Press symbol
, the value flashes.
to change the value in 5 ml increments.
to save the water quantity for this product.
These settings were taken over for the draw-off key for 2
cups.
Ⅲ
WATER QUANTITY
Ⅲ Use the symbols
or press programming key
to reach the next programming stage
13.7 Programming the steam portion
to quit Programming Mode.
The programmable steam portion time is between 3 and 60
seconds.
13.6 Programming 1 cup
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Now, you will program the draw-off key 1 cup (3). This has
no influence on the touch screen.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
E
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PLEASE SELECT
Ⅲ Press programming key
until you hear an acoustic signal.
Ⅲ Press symbol
until the following message is displayed:
PLEASE SELECT
Ⅲ
STEAM 20 SEC.
Ⅲ Press programming key
until you hear an acoustic signal.
Ⅲ Press symbol
Ⅲ Press symbols
Ⅲ Press symbol
, the value 20 flashes.
to change the value.
to save the new value.
Ⅲ Press symbol
until the following message is displayed:
Ⅲ
1 CUP 120 ML.
Ⅲ Press symbol
Ⅲ Use symbols
Ⅲ Press symbol
, the value flashes.
Ⅲ
STEAM 40 SEC (Example)
to change the value in 5 ml increments.
to save the water quantity for 1 cup.
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
to quit Programming Mode.
Ⅲ
1 CUP NORMAL
Ⅲ Press one of the symbols (
/
/
) to select the strength of
your coffee.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
13.8 Programming the water portion
Ⅲ Press programming key
until you hear an acoustic signal.
Ⅲ Press symbol
until the following message is displayed:
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ
TIME —:—
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ Press symbol
flashes.
, you will hear an acoustic signal and —:—
Ⅲ Use symbols
to adjust the hours and confirm by pressing
.
PLEASE SELECT
Ⅲ Use symbols
pressing
to adjust the minutes and confirm by
. The time is now programmed.
Ⅲ Press programming key
Ⅲ Press symbol
until you hear an acoustic signal.
until the following message is displayed:
, you will hear an acoustic signal.
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
to quit Programming Mode.
Ⅲ
WATER PORTION
Ⅲ Press symbol
If the machine is disconnected from mains supply, the time
must be programmed again.
Ⅲ
PRESS KEY
Ⅲ Press water portion draw-off key
.
Ⅲ
ENOUGH WATER? PRESS MAINTENANCE.
When the required water quantity is reached press key . The
water draw-off operation is stopped, the water portion is
programmed now.
13.10 Programming the automatic switch-on time
You must programme the time (Chapter 13.9) if you want to
use the automatic switch-on function.
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
to quit Programming Mode.
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
13.9 Programming the time
You must programme the time if you want to use the
automatic switch-on function.
PLEASE SELECT
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Ⅲ Press programming key
Ⅲ Press symbol
until you hear an acoustic signal.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
until the following message is displayed:
, you will hear an acoustic signal and —:—
Ⅲ
MACHINE ON —:—
Ⅲ Press symbol
flashes.
PLEASE SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
16
13.12 Cup counter
Ⅲ Use the symbols
to select the hours and confirm by
to adjust the minutes and confirm by
pressing
.
This function is available with the following products:
In Aroma Select via symbols and via the pre-
ground coffee draw-off key
and draw-off key for 2 cups
Ⅲ Use symbols
pressing
,
,
. The switch-on time is now programmed.
, draw-off key for 1 cup
.
Ⅲ Use the symbols
to reach the next programming stage or
press programming key
to quit Programming Mode.
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
13.11 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can
programme the switch-off time in a range between 0.5 and 9
hours, or select –:– (i.e. function switched off).
PLEASE SELECT
Ⅲ Press programming key
Ⅲ Press symbol until the following message is displayed:
DRAW OFFS ....... (Total number of draw offs)
until you hear an acoustic signal.
Ⅲ Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ To learn how often a function was selected, press the cor-
responding key or symbol.
E
Ⅲ Use the symbols
press programming key
to reach the next programming stage or
to quit Programming Mode.
PLEASE SELECT
Ⅲ Press programming key
Ⅲ Press symbol until the following message is displayed:
OFF AFTER 5.0 HOURS
until you hear an acoustic signal.
13.13 Programming the language
Ⅲ
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ Press symbol
flashes.
, you will hear an acoustic signal and 5.0
to select the hours and confirm by
to reach the next programming stage or
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
Ⅲ Use the symbols
pressing
Ⅲ Use the symbols
press programming key
.
to quit Programming Mode.
PLEASE SELECT
Ⅲ Press programming key
Ⅲ Press symbol until the following message is displayed:
SPRACHE DEUTSCH
until you hear an acoustic signal.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Your coffee machine must be switched on.
Ⅲ Press symbol
, you will hear an acoustic signal and
DEUTSCH flashes.
Ⅲ Press symbols
Ⅲ Press symbol
to select the required language.
to save the new settings.
Ⅲ Carefully take out the drip tray, it is filled with water.
Ⅲ
Ⅲ
NO TRAY
Ⅲ
LANGUAGE ENGLISH
PLEASE SELECT
Ⅲ Use the symbols to reach the next programming stage or press
programming key
to quit Programming Mode.
The red water level warning message appears when the
coffee drip tray is full.
13.14 Connectivity
14.3 No Drip tray
With the Connectivity system it is possible for your IMPRESSA
F90 to communicate with your PC and the Internet. To use this
f-Line.com or your local authorized dealer. Available as an
optional extra.
Ⅲ
NO TRAY
Ⅲ If this information is displayed, the drip tray is not installed
properly or was not installed at all.
Ⅲ
PLEASE SELECT
14. Maintenance
14.4 Filling the bean tank
14.1 Refilling water
Ⅲ
REFILL BEANS
Ⅲ
REFILL WATER
Ⅲ We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before doing this, switch off
the coffee machine.
Ⅲ If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 3.3.
Ⅲ Refill beans as described in Chapter 3.4.
Ⅲ
PLEASE SELECT
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
14.5 Replacing the filter
14.2 Emptying the coffee grounds container
After drawing off 50 liters the filter cartridge will be used
up.
Ⅲ
EMPTY COFFEE GROUNDS CONTAINER
Ⅲ If this information is displayed, drawing off products is no
longer possible and the coffee grounds container must be
emptied (Fig.8 ).
Refer to Chapter 6.2 «Replacing the filter».
Download from Www.Somanuals.com. All Manuals Search And Download.
18
14.6 Cleaning the coffee machine
If lime-scaling forms in the tank, remove it using a com-
mercial de-scaling agent. Take out the water tank.
After 200 draw-off operations or after 160 rinsing operations, the
coffee machine must be cleaned. A message appears on the display,
telling you to start the cleaning programme. You can still draw off
coffee or hot water/steam. However, we recommend that you
should clean the machine (Chapter 15) within the next few days.
If you use a CLARIS plus filter cartridge, remove it before
de-scaling the tank.
14.9 Emptying the system
Ⅲ
CLEAN MACHINE / PLEASE SELECT
This is necessary to protect the coffee machine against
damage occurring during transport as a result of frost.
14.7 Coffee machine calcified
Ⅲ Use the
key to switch off the coffee machine.
During normal use of the coffee lime scaling will occur. The
degree of calcification depends on the hardness of the water you
use. The machine will inform you when de-scaling is required. You
can still draw off coffee or hot water/steam. However, we recom-
mend that you should de-scale the machine (Chapter 16) within the
next few days.
Ⅲ Place a jug under the 2-stage frothing jet (15).
Ⅲ Press the steam portion draw-off key
message appears.
until the following
Ⅲ
SYSTEM EMPTYING
Ⅲ The coffee machine is switched off.
Ⅲ
MACHINE CALCIFIED / PLEASE SELECT
E
15. Cleaning
14.8 General cleaning instructions
The coffee machine features an integrated cleaning programme.
The procedure takes some 15 minutes.
Ⅲ Never use scrapers, abrasive cloths, sponges or caustic chemicals
for cleaning.
JURA cleaning tablets which are specially designed for the
cleaning program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Ⅲ Clean the inside and outside of the case using a soft, moist
cloth.
Ⅲ Clean the 2-stage frothing jet each time it was used.
Ⅲ Clean the control panel with a micro-fibre cloth.
Ⅲ After heating milk, draw off some water to clean the inside of
the 2-stage frothing jet.
Once started, the cleaning operation must not be interrupted.
Ⅲ You can disassemble the 2-stage frothing jet to clean it
thoroughly (Fig. 9).
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
Ⅲ The water tank should be rinsed daily and refilled with fresh
water.
Ⅲ
CLEAN MACHINE / PLEASE SELECT
Ⅲ Press maintenance key
until the following message appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
If acidic de-scaling agents are used, remove any splashes and
drops from sensitive surfaces, in particular surfaces made of
natural stone and wood, alternatively take appropriate pre-
ventive measures.
Ⅲ
Ⅲ
EMPTY TRAY. Take out the tray, empty it and
reinstall it.
PRESS MAINTENANCE
Ⅲ Press maintenance key
.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
Ⅲ
Ⅲ
MACHINE CLEANING
TABLET / PRESS MAINTENANCE (Fig. 6). You
will hear an acoustic signal.
Ⅲ
MACHINE CALCIFIED / PLEASE SELECT
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
MACHINE CLEANING
Ⅲ Use the key
to switch off the coffee machine.
EMPTY TRAY. You will hear an acoustic signal.
PRESS MAINTENANCE
Ⅲ
GOOD BYE
Ⅲ Remove hot water nozzle / 2-stage frothing jet.
Ⅲ Take out the water tank.
MACHINE CLEANING
EMPTY TRAY. You will hear an acoustic signal.
PLEASE SELECT
Ⅲ Press maintenance key
until the following message appears.
Ⅲ
Ⅲ
EMPTY TRAY
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
AGENT IN TANK
program has finished.
Completely dissolve the content of one blister (3 tablets) in a
jug containing 0.5 liters of water, and fill the mixture in the
water tank. Reinstall the water tank.
Ⅲ Now the cleaning operation is complete.
16. De-scaling
Ⅲ Put a sufficiently large container under the hot water jet (15).
The coffee machine features an integrated de-scaling programme.
The procedure takes some 30 minutes.
Ⅲ
Ⅲ
PRESS MAINTENANCE / AGENT IN TANK
Machine de-scaling
JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.
Ⅲ The de-scaling agent comes out of the hot water jet in intervals.
After some intervals the de-scaling agent is discharged directly
in the drip tray.
Ⅲ
Ⅲ
EMPTY TRAY. You will hear an acoustic signal.
REFILL WATER
Your machine will inform you if it needs de-scaling.
You can still draw off coffee or hot water / steam and start
the de-scaling programme later.
Thoroughly rinse the water tank and fill it with fresh cold tap
water. Then reinstall it.
Switch off the system before starting the de-scaling pro-
gramme. Once started, the de-scaling programme must not
be interrupted.
Ⅲ Put a sufficiently large container under the hot water jet (15).
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Ⅲ
Ⅲ
PRESS MAINTENANCE / REFILL WATER
MACHINE DE-SCALING
Ⅲ The water comes out of the hot water jet in intervals. After some
intervals the water is discharged directly in the drip tray.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
EMPTY TRAY. You will hear an acoustic signal.
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
After the de-scaling, clean the aluminium front using a
slightly moist cloth.
17. Disposal
Please return the coffee machine to your local dealer, the service
shop or to JURA for proper disposal (Fig. 3).
E
18. Tips for perfect coffee
Adjustable coffee spout
You can adjust the height of the coffee spout to the size of your
cups
Grinding degree
Refer to Chapter 3.5 «Adjusting the grinding gear».
Preheating cups
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
Sugar and cream
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
19. Messages
Cause
Remedy
REFILL WATER
Water tank is empty.
Float defective
Refill water
Rinse or de-scale water tank
Refill beans
REFILL BEANS
Bean tank is empty.
Although you have refilled beans,
the message still appears.
Draw off a cup of coffee.
The message will disappear only after you have
drawn off a cup of coffee
EMPTY COFFEE
GROUNDS CONTAINER
Coffee grounds container full
Tray reinstalled too early after emptying
Drip tray not installed properly or missing
Cleaning required
Empty coffee grounds container
Wait 10 sec. before reinstalling the tray
Install tray properly
NO TRAY
CLEAN MACHINE
MACHINE CALCIFIED
REPLACE FILTER
FAULT
Start cleaning programme (Chapter 15)
Start de-scaling programme (Chapter 16)
Change filter (Chapter 6.2)
De-scaling required
Filter empty
General fault
1) – switch off
– disconnect from mains supply
– connect machine to mains supply
– switch on machine
2) Have machine checked by JURA Service
Download from Www.Somanuals.com. All Manuals Search And Download.
22
20. Problems
Problem
Cause
Remedy
Very loud noise coming
from the grinding gear
Foreign body in grinding gear
Drawing off pre-ground coffee is still possible
Have machine checked by JURA Service
Clean 2-stage frothing jet
Too little froth when
frothing milk
2-stage frothing jet blocked
2-stage frothing jet in wrong position
Grinding degree too fine
Draw off steam (Chapter 10)
Coarser grinding gear adjustment
Use a coarser pre-ground coffee
Coffee only drips from
the coffee spout
Pre-ground coffee too fine
If the messages or problems are still present, please contact your local authorized dealer or JURA Elektroapparate AG.
E
Download from Www.Somanuals.com. All Manuals Search And Download.
23
21. Legal information
22. Technical Data
Voltage:
These operating instructions contain all the information required
for using, operating and maintaining the machine properly.
230V AC
1450 W
10 A
Power:
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such a(n) agreement, consent or legal relationship. Any
obligations to be fulfilled by JURA Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
Fuse:
Safety check:
Energy consumption Standby:
approx. 3.5 Wh
Energy consumption «Ready for
draw-off»:
approx. 11.5 Wh
static max. 15 bar
1.9 litres
Pump pressure:
Water tank:
Bean tank capacity:
200gr.
Coffee grounds container capacity: max. 16 portions
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without JURA Elektroapparate AG’s written approval.
Length of mains cable:
Weight:
approx. 1.1 m
9.7 kg
Dimensions (WxHxD):
28 x 34,5 x 44,5cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 “Low Voltage Directive” including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 “EMC Directive” including
Modification Directive 92/31/EWG
Download from Www.Somanuals.com. All Manuals Search And Download.
24
|