10.0z3 EasyShot
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnifying and Trimming Still Images............................................................................................ 20
Playing Back Movie Clips ........................................................................................................ 20
PLAYING BACK SOUNDS ............................................................................................................. 21
Recording a Voice Memo ........................................................................................................ 21
Playing Back a Voice Memo.................................................................................................... 21
DELETING FILES ........................................................................................................................... 21
Deleting a Single File............................................................................................................... 21
Deleting All Files...................................................................................................................... 22
Protecting Files........................................................................................................................ 22
EDITING IMAGES........................................................................................................................... 23
Rotating Still Images................................................................................................................ 23
Changing the Image Size ........................................................................................................ 23
Setting Photo Effect................................................................................................................. 24
SETTING THE DPOF ..................................................................................................................... 24
PLAYING A SLIDE SHOW.............................................................................................................. 25
COPYING THE FILES .................................................................................................................... 25
ADVANCE SETTINGS.......................................................................................................25
ADJUSTING SOUNDS ................................................................................................................... 25
SETTING AUTO REVIEW .............................................................................................................. 26
SETTING THE POWER SAVE ....................................................................................................... 26
SETTING THE LANGUAGE ........................................................................................................... 26
RESETTING THE FILE NUMBERS................................................................................................ 26
About the Folder & File Name ........................................................................................................ 26
File Naming..................................................................................................................................... 27
SETTING THE TV OUT.................................................................................................................. 27
SETTING USB PORT..................................................................................................................... 27
CHOOSING A STARTUP IMAGE ................................................................................................... 27
FORMATTING THE MEMORY ....................................................................................................... 28
RESETTING TO DEFAULT SETTINGS.......................................................................................... 28
MAKING CONNECTIONS .................................................................................................28
CONNECTING THE CAMERA TO A TV......................................................................................... 28
CONNECTING THE CAMERA TO A PC ........................................................................................ 29
Using the Card Reader............................................................................................................ 29
Connecting the Camera to a Computer with a USB Cable..................................................... 29
PRINGTING PICTURES DIRECTLY..................................................................................30
SOFTWARE INSTALLATION ............................................................................................31
SYSTEM REQUIREMENTS................................................................................................................... 31
USING THE INSTALLER SPLASH SCREEN................................................................................. 31
INSTALLING YOUR CAMERA DRIVER......................................................................................... 32
INSTALLING XVID CODEC............................................................................................................ 33
INSTALLING WINDOWS MEDIA PLAYER 9.................................................................................. 36
INSTALLING ARCSOFT PHOTOIMPRESSION ............................................................................ 38
INSTALLING ADOBE ACROBAT READER.................................................................................... 40
USING ARCSOFT PHOTOIMPRESSION ...................................................................................... 43
INSTALLING SOFTWARE-FOR MAC USERS.................................................................44
APPENDIX .........................................................................................................................45
TROUBLESHOOTING.................................................................................................................... 45
SPECIFICATIONS .......................................................................................................................... 46
GETTING HELP.............................................................................................................................. 47
SAFETY TIPS AND MANITENANCE ............................................................................................. 48
REGULATORY INFORMATION...................................................................................................... 50
Download from Www.Somanuals.com. All Manuals Search And Download.
2
GETTING STARTED
GETTING STARTED
STANDARD ACCESSORIES
Camera
USB Cable
Video out Cable
Soft Case
Strap
2 x AA Batteries
(Rechargeable*)
Software Installation CD-ROM
Quick Start Guide
Battery charger(*)
NOTE:
•
•
Items marked with (*) are available as optional accessories.
Note that the shape of the charger plug depends on the area where you purchased the
camera.
Attaching the Wrist Strap
Attach the wrist strap to your camera as shown.
Note: Do not swing the camera when carrying by the wrist strap.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
GETTING STARTED
Using the Soft Case
When not using the digital camera, keep it in the soft case for protection.
NAMES OF PARTS
Top
Front
Shutter button
Flash
Self-timer
lamp
Speaker
Lens
Strap ring
Microphone
Power button
Bottom
Back
Zoom W button
(Thumbnail)
Battery/card
chamber cover
Zoom T button
(Digital zoom)
playback mode button
MENU button
LCD monitor
Operation lamp
5-function button
Mode button
Tripod socket
DISP button
Side
5-function button
Scene/Delete/
Up button
Macro/Left
button
Flash/Right
button
USB connector
/ AV-OUT
SET/ADJ
button
Self-timer/
Continue/
Down button
Download from Www.Somanuals.com. All Manuals Search And Download.
4
GETTING STARTED
INSERTING THE BATTERIES
The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 2000 mAh /
1.2V to get 250 shots) batteries.
1. Slide the battery cover open.
2. Insert two AA-size alkaline batteries with the
positive(+) and negative(-) poles matching the
directions indicated inside the battery room.
3. Close the battery cover.
Low Battery Indicator
A low battery indicator
appears on the LCD screen when the batteries are nearly exhausted.
Batteries should be replaced promptly when the low batteries indicator appears.
Note:
•
Do not use manganese batteries. Manganese batteries cannot supply sufficient power to
support camera operation.
•
•
•
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries from the camera if you do not plan on using it for more than two weeks.
The camera body may feel warm after extended use. This is normal.
Important: Users are not recommended to buy their own adaptor and use it on the camera as
power supply.
INSERTING A MEMORY CARD
You can use SD Card with this digital camera. The memory card slot is located beneath the battery
cover, adjacent to the battery compartment.
1. Be sure that the camera is turned off.
2. Slide the battery cover and open it.
3. Insert the SD card as shown in the diagram.
4. Close the battery cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
GETTING STARTED
To remove the memory card, gently press on the edge of the card and release it. Pull the card out
and close the battery cover.
About Camera Memory
The digital camera is equipped with internal memory. If the memory card is not inserted in the camera,
all images and movie clips recorded by the camera will be stored in the internal memory. If the
memory card is inserted, images and movie clips are stored on the memory card.
DCF Protocol
The DCF protocol defines the format for image file data as well as the directory structure for the
memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible cameras
from other manufacturers.
SETTING THE DATE AND TIME
When the camera is first turned on, the date and time setting will
not be correct. So before using, be sure to set date and time.
1. Press the MENU button, using or to select SETUP (
and press the SET button.
)
2. Press or to select DATE & TIME (
) then press or
the SET button to launch the Date & Time screen.
3. Press or tto change the value of the highlighted field.
Press or to highlight another field.
4. After adjusting the settings, press the SET or the MENU button
to apply the setting.
Note:
•
•
If you hold down or , you can change the value quickly.
If the batteries are removed for about two days, the Date & Time setting will be lost. In this
case, make these settings again.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
BASIC OPERATIONS
Power button
BASIC OPERATIONS
TURNING THE POWER ON AND OFF
1. Press and hold the POWER button to turn on the camera in the
Record mode. Or you can press the
camera in the Playback mode.
button to turn on the
2. Press the POWER button again to turn the power off.
Hint: You can turn on the camera by pressing and holding the
POWER or the
button over 1.5 seconds.
Playback mode button
Power Saving Function
If the camera is turned off by Power Save feature, press any button to turn it on again.
The Power Save feature does not work in the following situation:
•
•
•
•
Using the USB connector
During a slideshow
Recording movies or voices
Playing back a video or audio file
SWITCHING BETWEEN RECORD AND PLAYBACK
You can switch between the Record mode and the Playback mode in
following ways:
•
•
Press the MODE button to cycle through the still image shooting,
voice recording, and movie recording.
Press the
button to switch to the Playback mode.
Note: If you switch to Playback mode, the lens will retract after
approximately 10 seconds.
Mode button
Capture Mode
For shooting still images.
For recording audio files.
For shooting video clips.
Voice Recording Mode
Video Mode
For viewing the recorded images
and video clips.
Playback Mode
Playback mode button
Download from Www.Somanuals.com. All Manuals Search And Download.
7
BASIC OPERATIONS
USING THE MENUS
Recording Menu / Playback Menu
When a menu screen is displayed, the arrow button and the SET button are used to make the desired
settings.
1. Press the MENU button to display the menu.
•
The menu displays depends on whether you are in the Record mode or the Playback mode.
2. Press or to select a menu item.
3. Press or to change the setting.
•
In playback menu, press or to select an option, and then press the SET button to display a
confirmation screen or apply the setting.
4. Press the MENU or the SET button to save the settings and close the menu.
In playback menu, press the MENU button to close the menu.
•
Menu Item
Available Setting(for still image)
VGA
10M
8M
5M
3M
2M
Resolution
3:2
/
/
/
/
/
/
/
/
Quality
Metering
Sharpness
/
/
/
/
Effect
Off / B&W / Sepia / Neg. Art
Off / Date / Date & Time
Off / On
Date Stamp
Digital Zoom
Menu Item
Available Setting (for movie)
320
Movie Size
640
160
/
/
Metering
Stabilizer
/
/
Off / On
Menu Item
Protect
Available Setting (for playback)
Single / Lock All / Unlock All
Single / All
Delete
Slide Show
DPOF
Playing stored images in a slide show.
Single / All / Reset
Copy to Card
Effect
Single / All
B&W / Sepia / Neg. Art / Mosaic/ PhotoRite
Right 90 / Left 90 / Horizontal / Vertical
Reduces image size to smaller.
Recording a voice memo to a stored image.
User 1 / User 2
Rotate
Resize
Voice Memo
S.Image
Download from Www.Somanuals.com. All Manuals Search And Download.
8
BASIC OPERATIONS
ADJ. Menu
You can quickly adjust the Aperture Value, Shutter Speed, White Balance, ISO, Exposure in Record
mode.
1. Press the SET button to display the menu.
Program
Aperture Priority
Shutter Priority
Manual
Video
: can be adjusted
:can not be adjusted
2. Press or to select a menu item.
3. Press or to select an option
4. Press the SET button to confirm the settings and close the menu.
Menu Item
Available Setting
Aperture Value F2.8 / F3.2 / F3.6 / F4.0 / F4.5 / F5.1 / F5.7 / F6.4
8”, 5.6”, 4”, 2.8”, 2”, 1.4”, 1”, 0.7”, 1/2, 1/3, 1/4, 1/5, 1/8, 1/11, 1/16, 1/23, 1/30,
1/42, 1/60, 1/85, 1/125, 1/177, 1/250, 1/354, 1/500, 1/707, 1/1000, 1/1414, 1/2000
Shutter Speed
White Balance
ISO
/
/
/
/
/
/
AUTO
AUTO / 50 / 100 / 200
-2.0 to +2.0
Exposure
Setup Menu
You can change the basic settings of the camera in Record mode and Playback mode.
1. Press the MENU button to display the menu.
•
The menu displays depends on whether you are in the Record mode or the Playback mode.
2. Press or to select SETUP ( ) and then press the SET button to display the Setup menu.
3. Press or to select a menu item and then press or the SET button to launch the submenu.
4. Press or to select an option and press the SET button to apply the setting.
5. Press the MENU button to close the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
BASIC OPERATIONS
Menu Item
Sounds
Available Setting
Sets the camera sounds and volume.
Off / 3 sec. / 5 sec.
Auto Review
Power Save
Date & Time
1 min. / 3 min. / 5 min.
Sets the date & time.
English / Spanish / German / French / Italian / Portuguese / Dutch / Czech
/ Hungarian / Polish / Turkish / Russian / Japanese / Korean / S.Chinese /
T.Chinese
Language
File No.
TV Out
USB
Series / Reset
NTSC / PAL
Computer / Printer
S.Image
Format
Reset All
Sets the start-up image.
Formats the internal memory or memory card.
Resets all camera settings to initial default.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
BASIC OPERATIONS
USING THE LCD MONITOR
The LCD monitor is used to compose images while recording, adjust settings and replay images.
LCD Screen Indicator
In Recording
1 Mode icon
2 Flash
3 Macro
11 Aperture value
12 Shutter speed
13 Metering
4 Self-timer / Burst 14 Exposure
5 Zoom indicator
6 Battery
7 Storage media
8 Focus area
15 ISO
16 White balance
17 Sharpness
18 Quality
9 Shake warning
10Shots remaining
19 Resolution
In Playback
1 Mode icon
2 Protect
3 Voice memo
6
7
8
Storage media
Capture date & time
DPOF Date stamp
4 File number / Total 9 DPOF indicator
5 Battery 10 Resolution
Switching the Screen Display
Press the DISP button changes the next display mode of the LCD monitor as shown below:
In Record mode
In Playback mode
(1) OSD on
(4) OSD on
(2) Guide line
(5) OSD off
(3) OSD off
Hint: Use the “Guide line” mode to compose images easily before shooting images.
Note: When the LCD display is not in “OSD on”, press Macro, Self-timer, Flash will change the
display mode to “OSD on” automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
RECORDING
RECORDING
RECORDING STILL IMAGES
1. Hold the camera with both hands and make sure the camera is stable.
2. Set the camera to the
mode.
3. Aim the focus area to the subject that you want to take and press the shutter release button
halfway.
•
•
The focus area on the LCD monitor will light green when the camera is in focus.
If the shutter speed is slow or the possibility that image may be blurred, the shake warning icon
may appear on the LCD monitor. To avoid it, use a tripod to stabilize the camera when
recording images.
4. Fully press the shutter release button to take an image.
Note:
•
•
Make sure that your fingers or the wrist strap does not block the lens.
When the shutter release button is pressed halfway down, check the exposure value that
appears on the LCD monitor to make sure that it is appropriate for the lighting conditions.
Using the Zoom Function
Zoom W button
(Thmbnail)
Your camera has a combination of optical and digital zoom
functions that allow you to zoom in on far away subjects or
zoom out for a wide angle shot.
Zoom T button
(Digital zoom)
The optical zoom is achieved by mechanically adjusting
the lens of the camera. The digital zoom enlarges or
shrinks the image using a software process.
When the zoom lever is pressed, the zoom bar appears on the LCD
monitor.
Press [W] to zoom out for a wide-angle shot.
Press [T] to zoom in for a telephoto shot.
When the optical zoom factor is at maximum, zooming stops temporarily. Press the [T] again, the
camera switches to the digital zoom automatically and zooming continues.
Digital zoom works by enlarging the center portion of an image through a software interpolation
process. The digital zoom is used to achieve magnification levels up to approx. 4 times.
Note: Digital zoom is unavailable when recording movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
RECORDING
Using the Flash
Press flash button on the camera to set the various flash modes. A symbol appears on the LCD
screen to indicate the flash mode. The flash cannot be used in movie recording mode.
1. Set the camera to the
mode.
•
The flash function is only used in still image recording
mode.
Flash
2. Press the
button to change the flash mode:
Display
Option
Description
Flash fires automatically when shooting
conditions require extra lighting.
Auto flash
A
Flash strobes to let the subject’s eyes adjust
to the flash, then fires again to take the actual
image. The digital camera will detect the
subject brightness and use the flash only when
required.
Red eye reduction
Flash fires every time you take a photo,
regardless of lighting conditions.
Always on
Slow sync
Always off
Flash fires with a slow shutter speed.
S
The flash never fires even in dark situation.
3. Shoot the image.
Flash
Note: The flash charging time may increase when the battery is low.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is
shot. Use the burst to record four continuous still images shooting.
1. Set the camera to the
This function only used in still image shooting.
2. Press the button to change the settings:
mode .
•
Self-timer
Download from Www.Somanuals.com. All Manuals Search And Download.
13
RECORDING
Display
Option
Description
Record a single image.
-
Single shot
The shutter release will be delay for 2
seconds.
2-SEC
2
The shutter release will be delay for 10
seconds.
10-SEC
10
Record two images in a shot after
pressing the shutter release button 10 and
12 seconds.
Double
Burst
For capturing 4 images in succession.
3. Shoot the image.
Each option automatically switches to single shot in the following situation:
•
•
•
After each shot.
When the mode switched.
When the camera is turned off.
Note: When using the self-timer function, be sure to use a tripod or place the digital camera on a
level, stable surface.
Using the Macro mode
Your camera is equipped with a macro function that allows you to focus on very close subjects. In
macro mode you can focus on subjects 5 cm from the lens when in the maximum wide angle (zoomed
out) setting and 25 cm in the maximum telephoto (zoomed in) setting.
1. Set the camera to the
mode .
•
You can use the macro mode in still image shooting or movie
recording.
2. Press the
The macro mode icon (
3. To leave the macro mode, press the
button to enter the macro mode.
) appears on the LCD monitor.
button again.
•
Macro
Note: Distances referred to measure the distance between the camera lens surface and the
subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
RECORDING
RECORDING MOVIE CLIPS
Your camera can record movie clips with audio.
1. Set the camera to the
mode .
•
The LCD monitor displays the available recording time.
2. Press the shutter to start recording.
3. Press the shutter again to end recording.
•
The camera will stop recording automatically when the
memory capacity has been reached.
Note:
•
The voices of the movie clips are recorded from the microphone of the camera. Be careful to
avoid touching the microphone while recording.
•
The White Balance is set and locked to the settings of the first frame.
VOICES RECORDING
You can record voices using this camera.
1. Set the camera to the
mode .
•
The LCD monitor displays the available recording time.
2. Press the shutter to start recording.
3. Press the shutter again to end recording.
•
The camera will stop recording automatically when the
memory capacity has been reached.
Note: The voices are recorded from the microphone of the camera. Be careful to avoid touching
the microphone while recording.
SETTING THE RECORDING FUNCTIONS
Using the Scene Mode
You can select from various scene mode for specific shooting conditions.
1. Set the camera to the Record mode .
•
The scene mode function only used in still image shooting.
2. Press the button to show the Scene Mode screen.
3. Use the arrow button to select a desired scene mode and press the SET button to confirm the
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
RECORDING
Display
Option
Program
Description
All settings can be changed in this mode.
The Aperture can be set manually in this mode.
The Shutter can be set manually in this mode.
Aperture priority
Shutter priority
The Aperture value and Shutter speed can be set manually in
this mode.
Manual
Portrait
Blurring the background to focus on the subject.
Used for the wide scenic views.
Landscape
Night Scene
Shooting the subject while keeping the background night scenery.
Kids
Take a still image to capture moving kids.
Used for the beach or snow scenes.
Beach & Snow
Backlight
Shooting the image of backlight object by changing metering.
Sunset
Enhance the red hue for recording sunset images.
Close-up shooting for small subject.
Close-up
Text
Enhance the black & white contrast.
Sports
Fast shutter speed to capture fast moving subjects.
Slow shutter speed to take fireworks exploding.
Fireworks
Using the Program Mode
In this mode, you can specify any settings other than the shutter speed and aperture.
•
The aperture value and shutter speed will display on the LCD monitor when you half press the
shutter release button.
Using the Aperture Priority
In this mode, you can set an aperture value to match the brightness. A higher aperture value brings
the background out of focus. Selecting a lower aperture value allows you to soft the background.
Hint: The larger the aperture value the smaller the lens opening, allowing less light to enter the
camera.
Using the Shutter Priority
In this mode, you can set a shutter speed to match the brightness. Faster shutter speeds allow you
to take a sharp picture of a moving subject while slower speeds create a trail effect and allow you to
shoot without a flash in dark areas.
Hint: 1/250 indicates 1/250 second. And quote marks indicate the decimal place, so that 0”7
indicates 0.7 second and 2” indicates 2 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
RECORDING
Using the Manual mode
You can manually set the shutter speed and aperture to achieve a particular effect.
NOTE: If the image would be underexposed or overexposed and correct exposure cannot be
obtained, press the shutter release button halfway, the exposure value display on the LCD
monitor turns red.
Setting the Resolution and Quality
You can select lower image resolution and quality to decrease the image size to capture more images.
Choose a suitable setting according to the desired image quality and purpose.
Resolution
Option
Description
3648x2736 - Suitable for printing large size paper.
3648x2432 - Printing in 3:2 ratio.
10M
3:2
8M
5M
3M
VGA
3264x2448 - Suitable for printing normal size paper.
2560x1920 - Suitable for printing on A4 paper.
2048x1536 - Suitable for printing on A5 paper.
640x480 - Suitable for attaching to e-mails or using in websites.
Quality
Option
Description
Stores the image with an extremely low compression.
Stores the image with a low compression.
Stores the image with normal compression.
Setting the Movie Size
Movie clips can be shot with different size.
Option
Description
640x480 - Suitable for viewing on TV.
320x240 - Suitable for viewing on PC.
160x128 - Suitable for attaching to e-mails or using in websites.
640
320
160
Setting the Stabilizer
Use this function to create smooth, gliding shots when you’re walking or moving around, reducing the
camera shakes. It only works when the memory card has been inserted and the camera is ensured to
set in video mode.
Option
Description
Off
Turn off the frame stabilizer.
Helps you to prevent camera shake. When you turn on this function, the frame range
becomes narrow and preview frames may not display smoothly.
On
Download from Www.Somanuals.com. All Manuals Search And Download.
17
RECORDING
Setting the White Balance
Adjust the white balance to match different light sources such as sunlight, incandescent (tungsten)
lighting or, fluorescent lighting.
Option
Description
Automatically corrects white balance. Ideal for general photography.
Adjusts for bright sun conditions, or natural light conditions.
Adjusts for cloudy days or twilight conditions
AUTO
Adjusts for normal indoor lighting conditions. Corrects the orange hue of
household light bulbs. Ideal for indoor photos under tungsten or halogen
lighting without a flash.
Adjusts for fluorescent lighting. Corrects the green hue of fluorescent lighting.
Ideal for indoor photos under fluorescent lighting without a flash.
/
For more accurate adjustment or when the light source cannot be specified.
Note: Point the camera at a white piece of paper or similar object under the lighting conditions
for which you want to set the white balance, and then press the SET button.
Setting the ISO
With the initial settings, the ISO sensitivity is automatically set according to the brightness of the
subject.
Option
Auto
Description
Sets the ISO sensitivity automatically.
ISO 50
ISO 100
ISO 200
Sets the sensitivity to ISO 50 equivalent.
Sets the sensitivity to ISO 100 equivalent.
Sets the sensitivity to ISO 200 equivalent.
Note: Higher ISO speeds increase the image noise. To take clean images, use as low an ISO
speed as possible.
Setting the Exposure
Set the exposure value manually to compensate for unusual lighting conditions such as indirect indoor
lighting, dark backgrounds, and strong backlighting.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
RECORDING
Setting the Metering
There are 3 different light metering options available on your camera.
Option
Description
Light is measured from the entire shooting screen, but gives more importance
to the values near the center.
Selects an exposure based on readings from multiple points in the subject
area
Selects an exposure based on a single reading taken from the center of your
picture.
Setting the Sharpness
You can select whether you want the image to have sharp or soft outlines.
Option
Description
The edges of the image are emphasized. The edges will become sharp, but
noise may occur in the recording image.
The edges of the image are sharp. This is suitable for printing.
The edges of the image are softened. This is suitable for editing images on
PC.
Setting the Photo Effect
You can add special effects to your images in
mode.
Description
Option
Off
No effect is added to the image.
Convert image to black & white.
B&W
Sepia
Neg. Art
Recorded image will be stored in a sepia tone.
Opposite what they were in the original image.
Note: This function is not available to resolution 8M.
Setting Date Stamp
The Date Stamp function can be used to add a date to your pictures as you take them.
Option
Off
Description
Do not add the recorded date & time to printed images.
Only add the recorded date to printed images.
Add the recorded date & time to printed images.
Date
Date & Time
Download from Www.Somanuals.com. All Manuals Search And Download.
19
PLAYBACK
PLAYBACK
PLAYING BACK IMAGES
1. Set the camera to the Playback mode .
2. Press to play back the previous image; press to play back the next image.
Hint: Holding down or scrolls images in a high speed.
Using the Thumbnail
When in Playback mode, you can view all your stored images in
thumbnail format.
1. Set the camera to the Playback mode .
2. Press the zoom lever [W], a thumbnail screen is displayed.
3. Use the arrow button to select the desired image, and press [T]
or the SET button to show the selected image in full screen.
Magnifying and Trimming Still Images
1. Set the camera to the Playback mode.
2. Press
trimming.
or
to select the image that you want to magnify or
3. Press [T] to magnify the image, and the central portion of
the image is displayed. You can use the arrow button to view
different parts of the magnified image.
•
Press the MENU button to return to the normal size.
4. Press the SET button to set the image trimming.
5. Press the SET button again to trim the selected image and save
it as a new one.
•
Press the MENU button to cancel it.
NOTE: Only still images can be magnified and trimmed.
Playing Back Movie Clips
1. Set the camera to the Playback mode .
2. Press or to select the movie clip that you want to
playback.
3. Press the SET button to start the movie.
•
The movie clip will play on the LCD monitor.
4. Press the MENU button to stop the movie, or press the SET
button to pause the movie.
•
When movie clip paused, press the SET button again to
resume.
Hint:
•
During movie playing back, press
press to rewind it.
to fast forward or
•
Press the shutter button to capture the still image from the
movie clip while it is paused.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
PLAYBACK
PLAYING BACK SOUNDS
1. Set the camera to the Playback mode .
2. Press or
to select the audio clip that you want to playback.
3. Press the SET button to start playing the audio clip.
4. Press the MENU button to stop the audio clip, or press the SET button to pause it.
•
When audio clip paused, press the SET button again to resume.
Recording a Voice Memo
You can add a voice memo to the still images after you record it.
1. Set the camera to the Playback mode .
2. Press or
memo.
to select a still image that you want to add a voice
3. Press the MENU button, using or to select VOICE MEMO
(
•
) and press the SET button.
If the image already has the voice memo recorded, the
appears on the LCD monitor. The new recording will replace
the previous one.
4. Press the SET button to start recording for 30 seconds, or press
the MENU button to cancel it.
5. Press the SET button again to end recording.
Note:
•
•
The voice memo cannot be added to a movie clip or a protected image.
You cannot delete only the voice memo. When you delete the image, the attached voice
memo is also deleted.
Playing Back a Voice Memo
1. Set the camera to the Playback mode .
2. Press or to select the image that has the voice memo
recorded.
•
The image with a voice memo recorded shows
LCD monitor.
on the
3. Press the SET button to play to voice memo.
4. Press the MENU button to stop the voice memo, or press the
SET button to pause it.
•
When voice memo paused, press the SET button again to
resume.
DELETING FILES
Deleting a Single File
Single image can be deleted using the Playback Menu or pressing
the camera button (
).
1. Set the camera to the Playback mode .
2. Press the MENU button, then press or to select DELETE
(
).
3. Press or to select SINGLE, and then press the SET button
4. Press or to select the image you want to delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
PLAYBACK
5. Press the SET button to delete the image or press the MENU button to cancel.
6. Repeat step 4~5 to delete images.
Hint:
•
To quickly delete the current display image
1. Select the image you want to delete.
2. Press the
button to show a confirmation bar.
3. Press the SET button to delete the current display image.
Deleting All Files
You can use the Playback Menu to delete multiple files.
1. Set the camera to the playback mode .
2. Press the MENU button, then press or to select DELETE (
3. Press or to select ALL, and then press the SET button.
).
4. Press the SET button to delete all images or press the MENU button to cancel.
Note: The protect images cannot be deleted with the delete function.
Protecting Files
Files stored on your camera or on a memory card can be protected
to prevent accidental deletion.
1. Set the camera to the Playback mode .
2. Press the MENU button, then press or to select PROTECT
(
).
3. Press or to select SINGLE, and then press the SET button.
4. Press or to select the file you want to protect.
5. Press the SET button to protect the file or press the MENU button
to cancel.
•
When the file is locked, the
displays on the LCD monitor.
6. Repeat step 4~5 to protect images.
Hint:
•
To unlock the file, press the SET button again in step 5. The
unlocked.
will disappear and the file is
•
To lock / unlock all files at a time
1. Set the camera to the Playback mode.
2. Press the MENU button, then press or
3. Press or to select LOCK ALL (or UNLOCK ALL), and press the SET button.
A confirmation message appears.
4. Press the SET button to lock (or unlock) all files, or press the MENU button to cancel.
to select PROTECT (
).
•
Download from Www.Somanuals.com. All Manuals Search And Download.
22
PLAYBACK
EDITING IMAGES
Rotating Still Images
The still images can be rotated by various degrees.
1. Set the camera to the Playback mode .
2. Press or to select the image you want to rotate.
3. Press the MENU button, then press or to select ROTATE
(
).
4. Press or to select an option, and then press the SET
button.
5. Press the SET button to confirm the change or press the
MENU button to cancel.
•
The rotated image will be saved as a new file name.
Changing the Image Size
The resolution of still images that had already been recorded can
be changed.
1. Set the camera to the Playback mode .
2. Press or to select the image you want to resize.
3. Press the MENU button, then press or to select RESIZE
(
).
4. Press or to select an option, and then press the SET button.
The resized image will be saved as a new file name.
•
Note: Only a large size image can be resize to a smaller one.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
PLAYBACK
Setting Photo Effect
You can change or correct photo effect directly on the camera. The changed/corrected photos can
then be viewed or printed directly without the need to transfer them onto computer for further photo
editing or enhancement.
Photo Effect
B&W
Description
Convert color photo into black & white photo.
Add sepia tones to photo to make it looks like old photo.
Convert photo color into its opposite color.
Turn photo into a series of mosaic tiles.
Sepia
Neg. Art
Mosaic
PhotoRite is an advanced image processing technology for automatic photo
enhancement. Photos processed with PhotoRite will have a more well-balanced
color and exposure, and details in the scene can be seen more clearly. Problems
that PhotoRite can fix are backlit, under-expose, poor contrast, uneven-illumination
and color shift.
PhotoRite
1. Set the camera to the Playback mode (
).
2. Press or to select the photo that you want to change its effect.
3. Press the MENU button, then press or to select EFFECT.
4. Press or to select an option, and then press the SET button.
• The photo with the selected effect will be saved as a new file.
SETTING THE DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the memory card
for printing and specify the number of print copies in advance using the camera. This is extremely
convenient for sending the images to a photo developing service or for printing on a direct print
function compatible printer.
1. Set the camera to the Playback mode .
2. Press the MENU button, using
and press the SET button.
or to select DPOF (
)
3. Press or to select SINGLE, then press the SET button.
4. Press or to select the image you want to print out, and
the SET button.
5. Press or to specify the number of copies.
The number of copies can be set from 0 to 30.
•
•
To cancel this image DPOF setting, set the number of copies
to 0.
6. Press
and then press
or
to set or cancel the date
stamp of current image.
7. Press the SET button to apply the setting or press the MENU button to cancel.
8. Repeat step 4~7 to set other images for printing.
9. After you finished all image settings, press the MENU button to apply it.
Hint:
•
•
To set the DPOF setting for all images in a time, select ALL in step 3 and press the SET button.
To reset all DPOF settings to initial default, select RESET in step 3 and press the SET button.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
ADVANCE SETTINGS
PLAYING A SLIDE SHOW
You can set the camera to display images in a slide show.
1. Set the camera to the Playback mode .
2. Press the MENU button, using or to select SLIDE SHOW
(
) and press the SET button.
3. Use the arrow button to set the playback interval (
repeat or not ( ).
You can set the interval between 1~10 seconds.
) and
•
4. Press the SET button to start the slideshow, or press the MENU
button to cancel.
•
During the slideshow, press the SET button to pause the
slideshow and press the SET button again to resume.
Note: The slideshow function is not available for the movie clips and voice recording.
COPYING THE FILES
You may want to copy the data from the camera’s internal memory to the memory card for
convenience.
1. Be sure you had inserted a memory card to your digital camera.
2. Set the camera to the Playback mode .
3. Press the MENU button, using or to select COPY TO CARD
(
) and press the SET button.
4. Press or to select SINGLE, then press the SET button.
5. Press or to select the image you want to copy to a card.
6. Press the SET button to start copy.
7. Repeat step 5~6 to copy other images.
8. Press the MENU button to complete the setting.
Hint: To copy all images to a memory card in a time, select ALL in step 4 and press the SET button.
ADVANCE SETTINGS
ADJUSTING SOUNDS
You can adjust the sound volume and set different sounds as the
start-up sound.
1. Set the camera to the Setup Menu .
2. Press or to select SOUNDS (
) and then press or
the SET button to enter the sounds screen.
3. Use the arrow button to adjust the volume and select a desired
start-up sound.
4. Press the SET or the MENU button to apply the setting.
5. Press the MENU button to close the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
ADVANCE SETTINGS
SETTING AUTO REVIEW
When Auto Review is enabled, you can view an image for a few seconds after you have taken it.
Option
Off
Description
The captured image will not automatically display after shooing.
The captured image will display for 3 seconds after shooting.
The captured image will display for 5 seconds after shooting.
3 sec.
5 sec.
SETTING THE POWER SAVE
For power consumption, you can set your camera to turn off automatically for a period of time.
Option
1 min.
3 min.
5 min.
Description
The power will turn off automatically after 1 minute.
The power will turn off automatically after 3 minutes.
The power will turn off automatically after 5 minutes.
SETTING THE LANGUAGE
The camera can display menus and other information in a number of
different languages.
1. Set the camera to the Setup Menu .
2. Press or to select LANGUAGE (
SET button to launch the submenu.
) then press or the
3. Press or to select a language and press SET button to apply
the setting.
4. Press the MENU button to close the menu.
RESETTING THE FILE NUMBERS
Use this function if the camera experiences a “Folder cannot be created” error or if you want to restart
numbering, for example, after erasing all files.
Resetting the file number is useful for avoiding the file name duplication when images are downloaded
to a computer.
Option
Series
Reset
Description
Store the latest used file number no matter deleting files or inserting a new
memory card.
Reset file numbering each time the memory card is changed.
About the Folder & File Name
The digital camera automatically creates a directory of folders in the internal memory or memory card
that it uses to organize still images, movie clips and other information.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
ADVANCE SETTINGS
File Naming
File name are followed by a 4-digit number that increases in sequence. File numbering starts from
0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the
warning message “Folder cannot be created”. When it appears, try one of the following ways:
•
•
Reset the file number and plug in a new memory card.
Format the memory. The folder number and file number are initialized and renumbered from
100 and 0001 respectively.
Note: Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.
SETTING THE TV OUT
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option
NTSC
PAL
Description
America, Japan, Taiwan, Korea
All of Europe
SETTING USB PORT
You can set USB mode to connect the camera with a printer or computer.
Option
Computer
Printer
Description
To connect your camera to a PC.
To connect your camera to a printer.
CHOOSING A STARTUP IMAGE
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode.
2. Press or to select a desired image.
3. Press the MENU button, then press or to select S.IMAGE
(
).
4. Press or to select an option, and then press the SET button.
5. Set the camera to the Setup Menu .
6. Press
SET button.
7. Press or to select a desired image and press the SET or
the MENU button to apply the setting.
or to select S.IMAGE (
) then press or the
8. Press the MENU button to close the menu.
Note: The start-up image will not be deleted even if the original
image is deleted or memory formatted.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
MAKING CONNECTIONS
FORMATTING THE MEMORY
To erase all data stored in the memory card if you are using a card, or all data stored in the internal
memory if there is no card inserted.
1. Set the camera to the Setup Menu .
2. Press or to select FORMAT (
) then press or the SET button.
3. Press the SET button to start format, or press the MENU button to cancel it.
•
•
A “BUSY...PLEASE WAIT” message displays and the memory card is starting format.
A “COMPLETED” message displays when finish formatting.
Note: All data will be deleted including protected ones. Be sure to download important files to
your computer before formatting.
RESETTING TO DEFAULT SETTINGS
You can reset the entire menu and button operation settings to initial default.
1. Set the camera to the Setup Menu.
2. Press or to select RESET ALL (
) then press or the SET button to launch the submenu.
3. Press or to select YES then press the SET button to reset all settings.
Note:
The following settings do not change with this procedure:
•
•
•
Date & Time setting
Language setting
TV out setting
MAKING CONNECTIONS
CONNECTING THE CAMERA TO A TV
Images displayed on the camera’s monitor screen can
also be displayed on a television.
1. Use the included audio/video cable to connect the
camera to the TV set.
2. Set the TV input signal to Video In and Audio In.
Refer to the documentation included with your TV
for more information.
3. Everything that would normally appear on the
camera’s LCD screen, such as photo and video clip
playback, slide shows, and image or video capture,
appears on the TV.
Note: The camera LCD screen turns off automatically during video output.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
MAKING CONNECTIONS
CONNECTING THE CAMERA TO A PC
There are two ways to download files from the camera’s internal memory or memory card to a
computer:
•
•
by inserting the memory card into a card reader
by connecting the camera to a computer using the included USB cable
Using the Card Reader
1. Eject the memory from the camera and insert it in a card
reader that is connected to a computer.
2. Open My Computer or Windows Explorer and double-
click the removable drive icon that represents the
memory card.
3. Copy images from the card into a directory of your
choice on the computer’s hard disk.
Note: If you are using a PC card reader with a notebook computer, first insert the memory card
into the PC card adapter (optional), and then insert the PC card adapter into the computer’s PC
card slot.
Connecting the Camera to a Computer with a USB Cable
1. Install the USB software driver included with the
bundled CD-ROM.
2. Connect the supplied USB cable to the computer’s
USB port.
3. Turn on the camera.
4. The LCD screen turns off when the connection to
the computer has been successfully completed.
5. Open My Computer or Windows Explorer. A
“Removable Disk” appears in the drive list.
6. Double-click the “Removable Disk” icon to view its
contents.
7. Files stored on camera are located in the folder
name “DCIM”.
Note:
•
•
•
•
You don’t have to turn off the computer or camera when making this connection.
Refer to your computer’s manual for information regarding the USB port location.
The camera will turn off automatically if the USB cable is disconnected.
Windows 98SE: If this is the first time the camera has been connected to the computer,
Windows detects the camer as an “Unknown device” and automatically completes the required
software installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
PRINGTING PICTURES DIRECTLY
PRINGTING PICTURES DIRECTLY
There are two ways to print the stored pictures without the help of computer:
Printing Pictures by Using SD Card
1. Transfer the stored pictures from internal memory to SD card.
2. Set the DPOF ( refer to the section “Setting the DPOF”).
3. Insert the SD card into the SD card slot of the direct printing compatible printer.
4. Refer to the instruction manual of the printer to print the pictures.
Printing Pictures by Using a USB Cable
1. Set the camera to the Playback mode.
2. Press the MENU button, using or to select SETUP menu and press the SET button.
3. Press or to select USB, then press or the SET button to launch the submenu.
4. Press or to select PRINTER and then press the SET button to apply the setting.
5. Connect the camera to the printer with the supplied USB cable. The camera’s LCD will show
PICTBRIDGE MENU.
6. Follow the camera’s on-screen display and the printer’s instruction manual to print the pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
SYSTEM REQUIREMENTS
Windows:
•
•
•
•
•
•
PC with processor better than MMX Pentium 233 MHz
Windows XP/2000/ME/98SE
Minimum 32 MB RAM
USB port
CD-ROM drive
800x600 pixels, 16-bit color display compatible monitor
Macintosh:
•
•
•
•
•
•
Power Mac G3 or later
Mac OS 9.0, 9.1, 9.2 and OS X
Minimum 64 MB RAM
USB port
CD-ROM drive
800x600 pixels, 16-bit color display compatible monitor
*Specifications are subject to change without prior notice.
Option
Description
Camera Driver
Enables you to download the files taken with the camera.
It’s an ISO MPEG-4 compliant video codec and enables you to
compress/decompress digital video.
XviD Codec
Windows Media Player 9
Arcsoft Photoimpression 5
Adobe Acrobat Reader
Enables you to playback the video clips taken with the camera.
Enables you to edit and enhance pictures.
Enables you to view the electronic version of the User’s Guide.
Direct link to the electronic version of the User’s Guide in different
languages. (All User’s Guides are saved in PDF format.)
User’s Guide
Direct link to our camera support website. Ensure that an internet
connection is established before clicking on the link.
Concord Support Website
USING THE INSTALLER SPLASH SCREEN
The installer will automatically detect which software applications need to be installed or if they are not
necessary. This will be indicated by the buttons on the splash screen that appears when the CD-ROM
is inserted into the computer:
Color
Description
Required or highly
recommended to install.
Yellow (
)
Already installed or not
necessary to install.
Gray (
)
Download from Www.Somanuals.com. All Manuals Search And Download.
31
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
INSTALLING YOUR CAMERA DRIVER
Step 1
Step 2
Step 3
Make sure that your camera is not connected to the computer.
Make sure the computer is powered on and Windows 98SE/ME/2000/XP is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into the CD-ROM drive. The installer will pop up
automatically.
Note: If the installer does not appear automatically, double click ‘My Computer’, and then
double click the CD-ROM drive.
Step 4
Select the language. Click [OK].
Step 5
The installation screen will appear. Click on Install Camera Drivers.
Step 6
The two warnings will be shown orderly. Please ignore them and click [OK].
Step 7
Download from Www.Somanuals.com. All Manuals Search And Download.
32
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Click [Next].
Step 8
Step 9
Install progress bar.
To ensure the complete installation and enable the camera to function well, please do
select “restart your computer”.
Step 10
INSTALLING XVID CODEC
Note: To ensure the video clips can be played, please install XviD Codec.
Step 1
Step 2
Step 3
Make sure that your camera is not connected to the computer.
Make sure the computer is powered on and Windows 98SE/ME/2000/XP is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into the CD-ROM drive. The installer will pop up
automatically.
Note: If the installer does not appear automatically, double click ‘My Computer’, and then
double click the CD-ROM drive.
Step 4
Select the language. Click [OK].
Step 5
Download from Www.Somanuals.com. All Manuals Search And Download.
33
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
The installation screen will appear. Click on Install XviD Codec.
Step 6
Step 7
Step 8
Select the language. Click[OK].
Click [Next>].
Select “I accept the agreement” then click [Next>].
Step 9
Click [Next>].
Step 10
Download from Www.Somanuals.com. All Manuals Search And Download.
34
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Click [Next>].
Step 11
Click [Next>].
Step 12
Click [Next>].
Step 13
Click [Install].
Step 14
Download from Www.Somanuals.com. All Manuals Search And Download.
35
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Step 15 Install progress bar.
Click [Finish].
Step 16
INSTALLING WINDOWS MEDIA PLAYER 9
Step 1
Step 2
Step 3
Make sure that your camera is not connected to the computer.
Make sure the computer is powered on and Windows 98SE/ME/2000/XP is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into the CD-ROM drive. The installer will pop up
automatically.
Note: If the installer does not appear automatically, double click ‘My Computer’, and then
double click the CD-ROM drive.
Step 4
Select the language. Click [OK].
Step 5
The installation screen will appear. Click on Install Microsoft Windows Media Player 9.
Step 6
Step 7
Installation stars.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Read the License Agreement, then click “I Accpet”.
Step 8
Step 9
Step 10
The screen shows installing progress bars.
When the installing is complete, the screen shows welcome page. Click “Next”.
Choose the privacy options according to your preference, then click “Next”.
Step 11
Select or dis-select the file types that will use the Windows Media Player as default
player. Then click “Finish”.
Step 12
Download from Www.Somanuals.com. All Manuals Search And Download.
37
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
The screen shows the Windows Media Player window.
Step 13
Close the Windows Media player by clicking on the “X” on the left top corner or clicking
“File Exit”.
Note: If you have downloaded the video clips recorded with the camera onto your
computer, you can click “File Open ...” to view the video clips immediately.
Step 14
INSTALLING ARCSOFT PHOTOIMPRESSION FOR ALL WINDOWS
USERS(OPTIONAL)
Step 1
Step 2
Step 3
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM drive.
Note: If the installer does not start automatically within 30 seconds after the CD-ROM
has been inserted, click on My Computer either on the Desktop or in the Start Menu and
locate the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and
proceed to Step 5.
Step 4
Select the language. Click [OK].
Step 5
Download from Www.Somanuals.com. All Manuals Search And Download.
38
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
The installation screen will appear, Click on Install ArcSoft PhotoImpression 5.
Step 6
Click [Next >].
Step 7
Click [Yes].
Step 8
Click [Next >].
Step 9
Download from Www.Somanuals.com. All Manuals Search And Download.
39
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Click [Next >].
Step 10
Step 11 The screen will show the status of the installation.
You can choose to install DirectX 9 or not, then click [Finish].
Step 12
INSTALLING ADOBE ACROBAT READER (OPTIONAL)
Step 1
Step 2
Step 3
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM drive.
Note: If the installer does not start automatically within 30 seconds after the CD-ROM
has been inserted, click on My Computer either on the Desktop or in the Start Menu
and locate the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation
and proceed to Step 5.
Step 4
Select the language. Click [OK].
Step 5
Download from Www.Somanuals.com. All Manuals Search And Download.
40
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
The installation screen will appear, Click on Install Adobe Acrobat Reader 6.
Step 6
Step 7
Step 8
“Recomposing data ...” status bar appear.
Note for Win 98 SE users: As Adobe Reader 6
requires Internet Explorer 5.01 or greater, you may
see below information:
Note for Win 2000 users: As Adobe Reader 6 need
the support of Win 2000 SP2, you may see below
information:
In this case, please click [OK] to close the message
screen, and then click [Finish] to terminate the
Adobe Reader 6 installation. Then go to www.
microsoft.com website to upgrade your system and
then to install the Adobe Reader 6 again.
If your Internet Explorer is version 5.01 or above, the
installation of Adobe Reader 6 will start. The screen
shows screen as below. Click [Next >].
Download from Www.Somanuals.com. All Manuals Search And Download.
41
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
Click [Next >].
Step 9
Click [Next >]. The files will be saved into C:\Program Files\Adobe\Acrobat 6.0
automatically. You may change the default folder by clicking [Change Destination
Folder...] and selecting a different folder in your computer.
Step 10
Click [Install] to start install the Adobe Reader 6.
Step 11
Click [Finish].
Step 12
Download from Www.Somanuals.com. All Manuals Search And Download.
42
SOFTWARE INSTALLATION(FOR WINDOWS USERS)
USING ARCSOFT PHOTOIMPRESSION (FOR WINDOWS USERS )
You can use PhotoImpression 5 to transfer photos from the camera to your computer and or to edit/
enhance the photos saved on your computer. Follow steps below to transfer photos:
1. Connect the camera with your computer by using the supplied USB cable.
2. Launch PhotoImpression 5 by double clicking the icon representing the software on the desktop
(
). The screen as shown in figure 1.1 appears:
(Fig. 1.1)
). The screen as shown in fig. 1.2 appears.
3. Click on Removable Media (
(Fig. 1.2)
(Fig. 1.3)
(Fig. 1.4)
4. Click OK. The photos stored in the camera will be shown. (Fig. 1.3)
5. Click OK to start saving the pictures onto your computer. When it is completed, click OK (fig. 1.4).
6. When the photos are shown as fig. 1.5, you can play with the photos, for example, to view a photo
in detail, to enhance the photo … etc. For more information, please refer to the Help provided by
the software.
(Fig. 1.5)
Download from Www.Somanuals.com. All Manuals Search And Download.
43
INSTALLING SOFTWARE – FOR MAC USERS
INSTALLING SOFTWARE – FOR MAC USERS
Note for Mac users: If the video clips recorded with the camera cannot be viewed by using the
QuickTime player bundled with your Mac system, please complete the following installation steps.
For Mac OS 9 Users
1. Start up your computer and insert the software CD into your
computer’s CD-ROM driver.
2. Double click “JD10 v100” icon on your desktop.
3. Double click DivX 5.1.1 Installer in the zip file under Mac\OS9
folder to start installing the software.
4. Follow the on-screen instructions to complete the installation,
then restart your computer to ensure the successful installation.
5. Copy file named “XVIDDelegatePPC” into Extensions folder and
restart the OS.
For Mac OS X Users
1. Start up your computer and insert the software CD into your
computer’s CD-ROM driver.
2. Double click “JD10 v100” icon on your desktop.
3. Double click DivX 5.2.1 Installer in the zip file under Mac\OSX
folder to start installing the software.
4. Follow the on-screen instructions to complete the installation.
5. Copy file named “XVIDDelegate.component” into /Library/
QuickTime.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
APPENDIX
APPENDIX
TROUBLESHOOTING
Problem
Cause
Solution
Battery is inserted in the wrong
direction.
Reload battery in the correct direction.
Replace or recharge batteries.
Power does not turn
on.
Batteries are dead.
The battery compartment door
is open.
Make sure the battery compartment door
is securely closed.
The flash is charging.
Memory is full.
Wait for the flash to charge.
Insert a new memory card.
The camera does not
take pictures.
Memory card is not formatted
correctly.
The card may be detective, use a new
card.
Image is not recorded The Flash is charge.
when the shutter
button is pressed.
Wait for the flash to charge.
Insert a new memory card.
Memory is full.
The flash does not
fire
Flash is set to OFF.
Set the flash to any mode except off.
The camera was moving when
the image was captured.
Hold the camera steady when shooting
picture.
Image is blurry or out
of focus.
Turn the Macro mode on to ensure the
subject is within 5 cm (zoom out) or 25
cm (zoom in). Do not use Macro mode
when shooting distant subjects.
The subject was beyond the
range within which the camera
can focus.
Image is not
A memory card with non-DCIF
This camera cannot display non-DCIF
images.
displayed on the LCD images (recorded with other
monitor.
camera) is loaded.
The camera was turned
off/powered down before the
image was stored in memory.
If the battery low indicator appears on
the LCD monitor, replace the battery
immediately.
Recorded images are
not saved in memory.
Cannot transfer
Install the USB driver before you
connect the camera to a computer / turn
the camera on.
images to a computer
after connecting the
USB cable.
USB driver is not installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
APPENDIX
SPECIFICATIONS
Sensor
10.13 Mega Pixels CCD / Size : 1/2.5 inch
Focal Length : f=7.94 ~22.71mm ,
3X optical zoom, 4X digital zoom
Lens
LCD monitor
Focus Range
2.4” TFT color LCD
Normal: 80cm ~ Infinity
Macro: (W) 5cm ~ 100cm / (T) 25cm ~100cm
Aperture
Shutter
F/2.8 ~ 5.1
8 ~ 1/2000 sec.
Still Image: JPEG (EXIF 2.2 compatible) , DCF compatible, Support DPOF,
PictBridge available
Video: MPEG 4 with Audio / Audio: WAV
File Format
Resolution
Scene Mode
Still Image: 3648x2736 / 3648x2432(3:2) / 3264x2448 / 2560x1920 /
2048x1536 / 640x480
Video: 640x480 / 320x240 / 160x128
Aperture priority / Shutter priority / Manual / Portrait / Landscape / Sunset
/ Night Scene / Text / Backlight / Kids / Beach & Snow/ Close up/ Sports /
Fireworks
Sensitivity
Auto / ISO 50 / ISO 100/ ISO 200
Auto / Daylight / Cloudy / Tungsten / Fluorescent (H) / Fluorescent (L) /
Custom
White Balance
Exposure Control
Metering
-2EV to +2EV in 1/3 step
Center-weighted / Multi / Spot
Burst
4 shot / snap
Self-timer
Flash
2 sec. / 10 sec. / Double
Auto / Red eye reduction / Always on / Slow sync / Always off
Black & White / Sepia / Negative Art / Mosaic
Photo Effect
32MB internal memory
SD slot
Storage
TV system
Power Supply
NTSC / PAL
AA rechargeable Ni-MH battery X2
AA alkaline battery X2
Operating: 0°C to 40°C
Storage: -20 to 60° C
Ambient temperature
Microphone
Speaker
Built-in
Built-in
Dimension
Weight
89 x 60.5 x 28.1 ( Max. 32.7, lens ~ LCD ) mm
Camera Body w/o battery : Approx. 140 (g)
*These specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
APPENDIX
GETTING HELP
You can get help from the troubleshooting section, FAQ or Customer Support on our website.
Troubleshooting Section in this User’s Guide
Please refer to the Troubleshooting section first, as it contains some of the most common problems
that users encounter.
Website FAQ
Website Customer Support
If the problem you are encountering is not listed in the FAQ section, please send us an email through
our web site by clicking on Contact Us.
If you have questions concerning the operation of the camera or software installation, please have the
following information ready before you contact us:
Camera Information:
Name of camera model:
Camera Serial Number:
Computer Information:
Operation System:
Computer Maker and Model:
Exact Error Message Received:
For ArcSoft Technical Support on Photo Editing Software, please contact:
In the USA and Canada
ArcSoft, Inc.
China
ArcSoft Beijing Co., Ltd.
No. 6 South Capital Gym Road
Beijing New Century Hotel Office
Building, #1060
Beijing 100044, China
Tel: 8610-6849-1368
Fax: 8610-6849-1367
E-Mail:[email protected]
46601 Fremont Blvd.
Fremont, CA 94538
Tel: (510) 440-9901
Fax: (510) 440-1270
E-mail: [email protected]
Japan
Europe
ArcSoft Japan
9F, 1-21-9, Higashi-Gotanda,
Shinagawa-ku,
Tokyo 141-0022, Japan
Tel: +81-3-5795-1392
Fax: +81-3-5795-1397
E-Mail: [email protected]
Unit 14, Shannon Industrial Estate
Shannon, Co. Clare, Ireland
Tel: +353 (0) 61-702087
Fax: +353 (0) 61-702001
E-Mail: [email protected]
Taiwan
Latin America (local call only)
Tel (Brazil): 00817-200-0709
Tel (Chile): 800-202-797
ArcSoft Inc. Taiwan Branch
Tel: +886 (0) 2-2506-9355
Fax: +886 (0) 2-2506-8922
E-Mail: [email protected]
E-Mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
47
APPENDIX
SAFETY TIPS AND MAINTENANCE
Cleaning the camera body
Please use a soft dry cloth to clean the camera.
Cleaning the lens and LCD
1. Blow off dirt or dust with a blower or canned air.
2. Gently wipe the lens and/or LCD with a micro-fiber cloth.
3. To remove dirt or residue, moisten the cloth with lens cleaning fluid and gently wipe the lens and/or
LCD.
CAUTION: Do not apply the fluid directly onto the lens or LCD.
Cleaning the battery contacts
As a matter of routine operation and handling, should any debris or foreign contaminant deposit itself
on the battery contacts in the camera and/or on the batteries, follow steps below to clean the battery
contacts to ensure proper electrical operation:
1. Wet the tip of a cotton bud/swab with rubbing alcohol and squeeze the excess alcohol from the
bud/swab.
2. Wipe the battery contacts inside the camera battery compartment and both ends of the batteries
lightly with the damp bud.
3. Allow the contacts to dry before placing batteries in the camera.
Caution:
1) Do not press hard during cleaning, as this will cause damage to the battery contacts.
2) Do not use water to clean the contacts, as this will increase the chance of oxidation.
3) Do not use Acetone or Nail Polish remover to clean the contacts as this may adversely affect
camera operation.
Safety Tips
Precautions for the camera
•
Do not attempt to modify this camera in any way. This may cause a fire, electric shock or severe
damage to the camera.
•
•
•
Do not use the flash in close proximity to people or animals.
When taking photographs, never point the lens of the camera directly into very strong light.
Please do not use this product in close proximity to flammable or explosive gases as this could
increase the risk of explosion.
•
For safety reasons keep this product and accessories out of reach of children or animals to prevent
accidents.
•
•
Do not swallow batteries or small camera accessories.
Keep the camera away from water and other liquids, and never let it get wet. Do not use outdoors
when it is raining or snowing.
•
•
Should any form of liquid enter the camera, do not use it. Switch the camera off, and then remove
the batteries. Do not continue to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access points
e.g. card slot and battery chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.
Under the environment with electrostatic discharge, the camera may malfunction and require the
user to reset the camera.
•
•
•
Under the environment with electrical fast transients (EFT), the camera may lose function and
require user to reset the camera.
•
•
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Please avoid using the camera in high or low temperature. Operation temperature range 32°F -
104°F (0°C- 40°C).
•
•
It is normal that the temperature of the camera body rises after being in use for a long period.
Do not leave this camera in places subject to extremely high temperatures such as in a sealed
vehicle, direct sunlight or other places with extreme variances in temperature. Exposure to extreme
Download from Www.Somanuals.com. All Manuals Search And Download.
48
APPENDIX
temperatures may adversely affect the camera’s internal components and could cause a fire.
•
•
Always use the camera and its accessories in a well-ventilated area.
Allowing dust to accumulate in the camera over a long period of time is hazardous and in extreme
circumstances may cause a fire. It is best to clean your camera prior to seasonal periods of high
humidity.
Precautions for batteries
•
•
•
•
•
Dispose of the battery in a manner that complies with applicable laws.
Leakage, overheating, or burst battery could result in fire or injury.
Do not short circuit, heat or dispose of batteries in fire.
Ensure the battery is positioned correctly with regard to polarity.
Battery may lose power if kept inside the camera for a long time without using. Please remove the
battery while the camera is not in use.
•
Batteries may not work normally under 32°F (0°C).
Precautions for SD Memory Cards
•
In the event of malfunction or damage, it is possible that data may be lost. Concord Camera is not
responsible in any way for such data loss.
•
•
•
•
Do not touch the terminals with hands or metal objects.
Keep dust, water and foreign objects away from the terminal section.
Avoid heat, liquid and direct sunlight when using and for when storing.
Do not open the battery/card cover or remove the SD Memory Card while data is being read or
written.
•
•
Do not dismantle or modify.
The recorded data may be lost if the card is affected by strong static electricity, electrical shock,
during card repair or malfunction.
•
•
When using SD Memory Cards do not change the attributes (read-only, etc.) of the files (pictures
(JPEG) or video clips (AVI) on the card. Doing so may prevent the camera from working properly
when deleting, etc.
Do not change the file names or the directory name of the pictures or video clips using a computer
or save files other than pictures or video clips taken by this camera onto the SD memory card.
Pictures or video clips that have been edited or added to the SD memory card with the computer
may not play back and it may cause the camera to malfunction.
The SD Memory Card includes a write-protect switch. Sliding this switch downward prevents data
from being written to the card and pictures and video clips saved on the card are protected.
Please note that pictures and video clips cannot be taken or deleted when the write-protect switch
is on.
•
•
•
•
When using a large-capacity card, writing, reading and deleting may take some time.
Do not store the card in places with high humidity, dusty places or where static electricity or
electromagnetic fields are likely to occur.
•
Images stored in the memory card may be ruined or damaged if you turn off the camera while it is
in process of reading, writing or formatting etc.
•
•
SD cards are delicate electronic devices. Please do not bend or drop them
Please do not place the SD card in or near to an environment of strong electronic or magnetic
fields such as loud speakers or TV receivers.
•
•
•
•
Please keep the SD card in its bag or case when not in use.
It’s normal that the SD card is warm after use.
Please make sure you switch off the camera before you remove the SD card.
Do not open the battery/memory card door or remove the SD Memory Card while the camera is
reading, writing or formatting the card.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
APPENDIX
REGULATORY INFORMATION
INFORMATION
FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15
of FCC rules. Only the cable supplied with the camera should be used. Operation with other cables
is likely to result in interference to radio and TV reception and could void the user’s authorization to
operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
Tested to comply
with FCC standards
for HOME OR OFFICE USE
Changes or modifications not expressly approved by the manufacturer may void the user’s authority to
operate this equipment.
USER INFORMATION
Note: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
- This product is in conformity with Directive 89/336/EEC.
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union
and other European countries with separate collection systems)
This symbol on the product, or in the in the manual and in the warranty, and/or on its packaging
indicates that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
If your equipment contains easy removable batteries or accumulators please dispose these separately
according to your local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local city offi ce, your household waste disposal service
or the shop where you have purchased the product.
The Jenoptik trademark is used by Concord Camera Corp. and its subsidiaries under license. Concord and the Concord logo are registered
trademarks or trademarks of Concord Camera Corp., in the United States and/or other countries. Microsoft and Windows are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PhotoRite is a trademark of Zensis Limited.
PictBridge is aDtraodwemnalrok.ad from Www.Somanuals.com. All Manuals Search And Download.
50
Visit Concord on the Internet
Version 1.0
586220-00
R1
JD 10.0z3 EasyShot User’s Guide
Copyright 2006 Concord Camera Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
|