Model 99002
Class 2
Multifunctional Stereo
Headphones
CAUTION
This product does not have a user-serviceable battery. Please do NOT attempt
to change the battery yourself. The battery used in this device may present a
risk of fire or chemical burn if misused. Please avoid extreme temperatures.
Do not use this product on an airplane in transit as this could disrupt
communication.
Vers. 1 8/06
ownload from Www.Somanuals.com. All Manuals Search And Downloa
Table of Contents
Charging....................................................................................................4
Pairing the Headphones
To a Phone .............................................................................................5
To an Audio Source ..............................................................................6
Volume Control........................................................................................7
Advanced Audio Controls......................................................................7
Switching between Audio and Phone Calls.......................................8
FAQs ...........................................................................................................9
Specifications.........................................................................................10
Warranty.................................................................................................11
Using the Product
Thank you for selecting the GE 99002 Multifunctional Stereo
Headphones. These headphones provide users with the ability
to receive stereo audio transmitted via Bluetooth® wireless
technology along with hands-free operation of Bluetooth®-
enabled phones. When paired with a mobile phone, this headset
allows you to switch back and forth between the audio source and
a phone call. The audio source for this headset can be any audio
device that is Bluetooth®-enabled to comply with A2DP (Advanced
Audio Distribution Profile) specification. The phone must be
compliant with Bluetooth® specification version 1.1 or 1.2.
3
ownload from Www.Somanuals.com. All Manuals Search And Downloa
Charging
•
Charge the unit for a minimum of 12 hours before first use.
Use the enclosed USB charging cable or the AC Adapter to
fully charge the headphones.
•
•
•
The red LED indicator will stay on constantly
when charging.
The headphones’ red LED charging indicator will shut
off automatically when the battery is fully charged.
The red LED indicator will start to flash RED when the
power is low. Charge the headset when you see the
LED low power indicator flashing.
Special Note about Bluetooth® and Phones:
Bluetooth® communication in phones is a new and evolving
technology. Unfortunately, like any new technology, not
everything works perfectly every time.
Not all of the phones that utilize Bluetooth® use the same data
interchange method. While the Bluetooth® industry and phone
manufacturers are attempting to standardize this, it is not perfect.
This Bluetooth® product is designed for compatibility with today’s
newer phones and may not work properly with older models.
There is also a possibility that not all of the phone’s features will
work on the Bluetooth® receivers and headsets. As an example,
after pairing and connecting the phone to the headphones, you
may not be able to answer the phone call by pressing the phone
button on the headphones; however, you may be able to push the
answer button on the phone and talk using Bluetooth® receivers
and headsets. It is recommended that you experiment with your
phone and receiver or headset to understand if you have any
limitations with your Bluetooth® phone.
Note: Some phones require that an explicit connection be
established with the headphones. For example, the Nokia 3650
4
ownload from Www.Somanuals.com. All Manuals Search And Downloa
requires a Bluetooth® connection to the headphones be initiated
and stay connected before proceeding. Other phones may initiate
a Bluetooth® connection only when a call is received. Refer to
your phone’s user manual for specific instructions. Some phones
send the ring indication to the headset while others do not. If your
phone supports this feature, you should hear the ring tone of your
phone on the headset. Phones that do not support ring indication
will automatically accept the call.
When using the GE 99002 headphones with a music source and
a phone at the same time, the headphones should be paired with
the phone before pairing with the audio device.
Caution: You will hear a high-pitched tone when the headphones
are turned ON and the Bluetooth® pairing is initiated. You may
want to wait until after the tone stops before wearing the
headphones.
Pairing the Headphones to a Phone
1. Once charged, power on the
GE 99002 headphones by
moving the power switch to ON.
The blue LED on the left ear side of
the GE 99002 should start blinking,
indicating it is searching for a device.
2. Make sure your Bluetooth® enabled
phone is turned on and within 6 feet
of the headphones.
Power ON/OFF
Use the phone’s menu system to pair it with your phone if you
want to be able to interrupt the music. See the phone’s manual for
directions on how to set your phone to pair with the headphones.
Directions for most phones are as follows, however your phone
may vary.
a. Go to the options or settings menu–select Bluetooth®
b. Enable phone for Bluetooth® operation
5
ownload from Www.Somanuals.com. All Manuals Search And Downloa
c. Search for Bluetooth® devices
d. Once the search for devices is complete, you should
find the 99002 headphones
e. Go through pairing sequence and connect to the
99002 headphones
f. Enter pass code “0000” if asked
g. Select “connect to 99002”
Connecting
1. ”Pairing” creates a link between a Bluetooth®-enabled phone
and the GE 99002 stereo headphones. It allows the phone to
remember the headset’s unique Bluetooth® ID. You may add it to
your phone’s “Paired Device” list. The headset needs to be paired
only ONE time with the phone before use.
2. Once your phone is paired, some phones require another step of
connecting to the device. Please check your phone’s manual on
how to connect via Bluetooth®.
3. Connect via your phone to the GE 99002. Please check your
phone’s owners manual for further information.
4. The blue LED Indicator on front of the left ear side blinks slow and
steady to communicate pairing and connecting is successful.
5. Once the headphones are paired, they can be easily connected
to the phone via the phone’s menu system if you add them to
the “Paired Device” list. Some phones will connect automatically
while other phones will require you to go back into your
Bluetooth® menu on your phone and connect. If the pairing
information is deleted from the phone, the headset must be
paired with the phone again.
Pairing the Headphones to an Audio Source
Make sure headphones are on and that your audio source
is Bluetooth®-enabled or you’ve purchased a stand-alone
6
ownload from Www.Somanuals.com. All Manuals Search And Downloa
transmitter like the GE 99001 Portable Transmitter or GE 99004
Home Stereo Receiver/Transmitter to make your audio source
Bluetooth®-capable.
1. Turn on the headset and your Bluetooth®-enabled audio source
or transmitter. They should pair automatically within two
minutes.
2. When pairing is complete, the blue Pairing LED indicator on the
headset will blink steady and slowly. You should now hear the
music playing from your transmitter thru the headphones.
3. If the audio source does not automatically pair to the GE 99002,
turn off the GE 99002 and the transmitting device, then try
again. This will cause the GE 99002 and your phone to loose
their connection.
4. Turn on the transmitting device and then the GE 99002 again.
While the GE 99002 and your audio device are pairing you will
see the Blue LED on the GE 99002 flashing quickly. Once your
GE 99002 is paired you will see a slow and steady blinking.
Note: Up to two minutes may be required to pair the headset with
a Bluetooth®-enabled product or transmitter for the first time.
Subsequent signal searches will be quicker.
Volume Control
Press and hold the Volume Up or Volume Down button to adjust.
You will hear a beep when you adjust the volume to the maximum
or minimum sound level.
Advanced Audio Controls
These advanced stereo headphones also provide music playback
control for use with Bluetooth®-enabled audio devices offering this
feature. If your audio device supports it, you can use the integrated
controls on the headphones to control (play, pause, previous track,
next track) your audio device.
7
ownload from Www.Somanuals.com. All Manuals Search And Downloa
Advanced Audio Controls
Function/
Mode
Button
1
Button
2
Button
3
Volume Up: Volume Down: Play / Pause:
Press & Hold Press & Hold Short Press
Audio
Next Song: Previous Song: Answer Phone:
Short Press
Short Press:
Long Press
Button 1
Button 2
Volume Up: Volume Down:
Press & Hold Press & Hold
Hang Up:
Short Press
Phone
Transfer Call to
Phone:
Long Press
Button 3
Short Press: < 3 seconds
Long Press: > 3 seconds
Switching Between Audio and Phone Calls
Setting Up / Prerequisite
Using your Bluetooth®-enabled phone’s menu, confirm that the
99002 headphones have been added to the “Paired Device” list and
connected to your phone. Note: If you haven’t paired the headset
with the Bluetooth®-enabled phone before, refer to the section
“Pairing the headphones to a phone.”
Making the Switch
1. Make sure that both your phone and mobile audio
device are paired with the headphones.
Note: Depending on your phone, you may have to pair the phone
with the headphones first, and then pair the headphones with the
audio device.
2. Depending upon your phone brand, when you receive a
call, the headphones may automatically mute the music and
switch to the phone mode automatically–just start
talking. If you hear the phone ring, press the phone button on
the headphones to answer. End a call by pressing the phone
button, or wait for the caller to hang up. Music from the audio
source will resume when the caller disconnects.
8
ownload from Www.Somanuals.com. All Manuals Search And Downloa
Conserving Battery Power
If you don’t want to use the GE 99002 headphones, turn them off
using the power switch.
Reconnecting to Your Phone
When you power on the GE 99002 some phones will auto connect
and other phones will require you to go back to your Bluetooth®
settings and manually connect. Please see the manual of your
phone for how to connect.
FAQs
1. How can I tell if the headphone’s battery has
insufficient power?
The battery power is almost exhausted when one or more of the
following scenarios occur:
a. The headphones start to reset automatically.
b. You can constantly hear breaks on the audio link about
every 30 seconds.
c. You cannot connect the headphones to any Bluetooth®
enabled device.
2. Why can’t I create a connection to the headphones?
a. Verify that the headphone batteries are fully charged.
b. Check to see if the headphones are powered on and the LED
indicator light is on.
c. Verify that the headphones are within the specified range of 30
feet (10 meters) from the audio source.
d. Check to see if any other Bluetooth® device is connected to the
headphones. If other devices are connected, the receiver’s status
LED indicator will flash slow and steady. Turn off all devices and
reconnect only those you wish to use.
e. Turn both the headphones and the audio source device off.
Power on the headphones and then power on the audio
source and try connecting again.
9
ownload from Www.Somanuals.com. All Manuals Search And Downloa
3. Can I adjust volume when I am in the phone mode?
The volume keys can be adjusted in both music and phone mode.
4. Why do I hear a beep from the headset?
The beep means the headphone is in low-power status.
The headset will beep every 20 seconds to remind you to charge it.
The red charging LED indicator also flashes to indicate low-power.
5. Why do my headphones miss or drop phone calls?
Some phones require manual activation and deactivation of
the call via the phone’s interface.
Specifications
Standard, Power Class
Frequency Band
Profile Supported
Audio Format
Bluetooth® 1.2 compliant, Class 2
2.402~2.480 GHZ unlicensed ISM band
A2DP, AVRCP, Headset & Hands Free Profiles
SBC
Rx Sensitivity
< 0.1% BER at -80 dBm
-6dBm to 4 dBm
RF Output Power
Sampling Rate
SNR
48 KHz
>85dB
Antenna
embedded antenna
Working Distance
Power Supply
Up to 30 feet in open space*
350mAH Lithium Ion Battery
-10 °C ~ +55 °C
Operating Temperature
Dimensions, Folded
Dimensions, Unfolded
Ear-to-Ear Distance
Weight
70mm (L) x 95mm (W) x 60mm (H)
150mm (L) x 110mm (W) x 65mm (H)
150mm Max.
About 200 grams
*Note: The maximum operating range depends on the paired phone model,
battery power, and environmental factors.
10
ownload from Www.Somanuals.com. All Manuals Search And Downloa
DISCLAIMER
While every effort has been made to ensure that the information in this
manual is accurate and complete, no liability will be accepted for any
errors and/or omissions made. The manufacturer reserves the right to
make changes and improvements to the specifications and features of the
hardware and firmware of the products described in this document without
prior notice. Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form is prohibited without prior
permission of the manufacturer. All trademarks acknowledged.
Limited One-Year Warranty
Jasco Products Company warrants this product to be free from
manufacturing defects for a period of one year from the original date
of purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to
other products that may be used with this unit. This warranty is in lieu of all
other warranties expressed or implied. Some states do not allow limitations
on how long an implied warranty lasts or permit the exclusion or limitation
of incidental or consequential damages, so the above limitations may not
apply to you. This warranty gives you specific rights, and you may also
have other rights which vary from state to state. If this unit should prove
defective within the warranty period, return prepaid with dated proof of
purchase to: Jasco Products Company, 10 E. Memorial Road,
Oklahoma City, OK 73114
The Bluetooth® word mark and logos are owned by Bluetooth® SIG, Inc. and
any use of such marks by JASCO Inc. is under license. Other trademarks and
trade names are those of their respective owners.
©2006 JASCO Products
Made in China
11
ownload from Www.Somanuals.com. All Manuals Search And Downloa
|